SM
Important Safety Precautions
Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this
user guide.
Violation of the instructions may cause serious injury or death.
G
Never use an unapproved battery since this could damage the phone and/or battery and could cause
the battery to explode.
G
Never place your phone in a microwave oven as it will cause the battery to explode.
G
Do not dispose of your battery by fire or with hazardous or flammable materials.
G
Make sure that no sharp-edged items such as animal’s teeth, nails, come into contact with the
battery. There is a risk of this causing a fire.
G
Store the battery out of reach of children.
G
Be careful that children do not swallow any parts such as rubber plugs (earphone, connection parts of
the phone, etc.). This could cause asphyxiation or suffocation.
VX8100 1
Important Safety Precautions
G
G
Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
When riding in a car, do not leave your phone or set up the hands-free kit near the air bag. If
wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.
G
G
G
Do not use a hand-held phone while driving.
Do not use the phone in areas where its use is prohibited. (For example, aircraft).
Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity,
such as a bathroom.
G
G
Never store your phone in temperatures less than -4°F or greater than 122°F.
Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your
phone. There is a risk of this causing a fire.
G
Do not drop, strike, or shake your phone severely. Such actions may harm the internal circuit boards
of the phone.
G
G
Do not use your phone in high explosive areas as the phone may generate sparks.
Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose
as it may cause electric shock or fire.
2 VX8100
G
G
Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may
cause electric shock or fire.
Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or
seriously damage your phone.
G
G
Do not disassemble the phone.
Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause
electric shock or fire.
G
G
Only use the batteries, antennas, and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
G
G
Do not hold or let the antenna come in contact with your body during a call.
An emergency call can be made only within a service area. For an emergency call, make sure that you
are within a service area and that the phone is turned on.
VX8100 3
Contents
1.2 Get New Ringtones . . . . . . . . . .32
1.3 My Ringtones . . . . . . . . . . . . . . . .33
1.4 My Music . . . . . . . . . . . . . . . . . .33
1.5 My Sounds . . . . . . . . . . . . . . . . . .34
1.6 Sync Music . . . . . . . . . . . . . . . . . .34
1.7 Manage Music . . . . . . . . . . . . . . .34
2. Get PIX & FLIX . . . . . . . . . . . . . . . . .35
2.1 Get V CAST Video . . . . . . . . . . .35
2.2 Get New PIX . . . . . . . . . . . . . . . .37
2.3 My PIX . . . . . . . . . . . . . . . . . . . . .37
2.4 My FLIX . . . . . . . . . . . . . . . . . . . .38
2.5 PIX Place . . . . . . . . . . . . . . . . . . . .39
2.6 Take PIX . . . . . . . . . . . . . . . . . . . .39
2.7 Take FLIX . . . . . . . . . . . . . . . . . . .40
3. Get Fun & Games . . . . . . . . . . . . .41
4. Get News & Info . . . . . . . . . . . . . . .41
5. Get Going . . . . . . . . . . . . . . . . . . . . . .43
6. Get Extras . . . . . . . . . . . . . . . . . . . . .43
Call Waiting . . . . . . . . . . . . . . . . . . . . . .16
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . .17
Voice Command . . . . . . . . . . . . . . . . . .17
Speed Dialing . . . . . . . . . . . . . . . . . . . .17
Important Safety Precautions . . . . .1
Welcome . . . . . . . . . . . . . . . . . . . . . . . . .7
Important Information . . . . . . . . . . . . .7
Phone Overview . . . . . . . . . . . . . . . . .10
Entering and Editing Information . .18
Text Input . . . . . . . . . . . . . . . . . . . . . . . .18
Text Input Examples . . . . . . . . . . . . . .19
Menus Overview . . . . . . . . . . . . . . . . .11
Getting Started with Your Phone . .13
Contacts in Your Phone’s Memory .21
The Battery . . . . . . . . . . . . . . . . . . . . .13
Installing the Battery . . . . . . . . . . . . .13
Removing the Battery . . . . . . . . . . .13
Charging the Battery . . . . . . . . . . . . .13
Battery Charge Level . . . . . . . . . . . . .13
Turning the Phone On and Off . . . . .14
Signal Strength . . . . . . . . . . . . . . . . . .14
Making Calls . . . . . . . . . . . . . . . . . . . .14
Redialing Calls . . . . . . . . . . . . . . . . . . .14
Receiving Calls . . . . . . . . . . . . . . . . . .15
Screen Icons . . . . . . . . . . . . . . . . . . . .15
Contacts Entries . . . . . . . . . . . . . . . . .21
The Basics of Storing Contacts
Entries . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Options to Customize Your
Contacts . . . . . . . . . . . . . . . . . . . . . . . . .22
Editing Contacts Entries . . . . . . . . . . .24
Deleting . . . . . . . . . . . . . . . . . . . . . . . . .26
Phone Numbers With Pauses . . . . .27
Searching Your Phone’s Memory . .28
Making a Call From Your Phone’s
Memory . . . . . . . . . . . . . . . . . . . . . . . . .28
MESSAGING . . . . . . . . . . . . . . . . . . .44
Access and Options . . . . . . . . . . . . . .44
1. New TXT MSG . . . . . . . . . . . . . . . . .45
2. New PIX MSG . . . . . . . . . . . . . . . . .46
3. Inbox . . . . . . . . . . . . . . . . . . . . . . . . .47
Message Icon Reference . . . . . . . . .48
4. Sent . . . . . . . . . . . . . . . . . . . . . . . . . .48
Quick Access to Convenient
Features . . . . . . . . . . . . . . . . . . . . . . . . .16
Vibrate Mode . . . . . . . . . . . . . . . . . . . .16
Lock Mode . . . . . . . . . . . . . . . . . . . . . . .16
Mute Function . . . . . . . . . . . . . . . . . . .16
Volume Quick Adjustment . . . . . . . . .16
Using Phone Menus . . . . . . . . . . . . .30
Menu Access . . . . . . . . . . . . . . . . . . . .30
GET IT NOW . . . . . . . . . . . . . . . . . . .30
Access and Options . . . . . . . . . . . . . .31
1. Get Tunes & Tones . . . . . . . . . . . . .32
1.1 Get V CAST Music . . . . . . . . . . . .32
4 VX8100
Message Icon Reference . . . . . . . . .49
5. Drafts . . . . . . . . . . . . . . . . . . . . . . . . .49
Message Icon Reference . . . . . . . . .49
6. Voicemail . . . . . . . . . . . . . . . . . . . . .50
7. Email . . . . . . . . . . . . . . . . . . . . . . . . .50
8. Mobile IM . . . . . . . . . . . . . . . . . . . .50
9. Chat . . . . . . . . . . . . . . . . . . . . . . . . . .50
MSG Settings . . . . . . . . . . . . . . . . . . . .51
3. Groups . . . . . . . . . . . . . . . . . . . . . . . .54
4. Speed Dials . . . . . . . . . . . . . . . . . . . .55
2. Sounds . . . . . . . . . . . . . . . . . . . . . . . .63
2.1 Master Volume . . . . . . . . . . . . . .63
2.2 Call Sounds . . . . . . . . . . . . . . . . .63
2.2.1 Call Ringtone . . . . . . . . . . . .63
2.2.2 Call Vibrate . . . . . . . . . . . . . .63
2.3 Alert Sounds . . . . . . . . . . . . . . . . .64
2.4 Keypad Volume . . . . . . . . . . . . . .64
2.5 Earpiece Volume . . . . . . . . . . . . .64
2.6 Service Alerts . . . . . . . . . . . . . . .64
2.7 Power On/Off Sound . . . . . . . . . .65
3. Display . . . . . . . . . . . . . . . . . . . . . . . .65
3.1 Banner . . . . . . . . . . . . . . . . . . . .66
3.1.1 Personal Banner . . . . . . . . .66
3.1.2 ERI Banner . . . . . . . . . . . . . .66
3.2 Backlight . . . . . . . . . . . . . . . . . . .66
3.3 Wallpaper . . . . . . . . . . . . . . . . . . .67
3.4 Display Themes . . . . . . . . . . . . .67
3.5 Fonts . . . . . . . . . . . . . . . . . . . . . .67
3.6 Power On/Off Anim. . . . . . . . . . .67
3.7 Status Light . . . . . . . . . . . . . . . . .67
4. System . . . . . . . . . . . . . . . . . . . . . . . .68
4.1 Standalone Mode . . . . . . . . . . . . .68
4.2 Network . . . . . . . . . . . . . . . . . . . .68
4.2.1 System Select . . . . . . . . . .68
4.2.2 Set NAM . . . . . . . . . . . . . . .69
RECENT CALLS . . . . . . . . . . . . . . . . .56
Access and Options . . . . . . . . . . . . . .56
1. Missed . . . . . . . . . . . . . . . . . . . . . . . .56
2. Received . . . . . . . . . . . . . . . . . . . . . .57
3. Dialed . . . . . . . . . . . . . . . . . . . . . . . . .57
4. All . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
5. View Timer . . . . . . . . . . . . . . . . . . . .58
Message Settings Sub-Menu
Descriptions . . . . . . . . . . . . . . . . . . . .51
SETTINGS & TOOLS . . . . . . . . . . . . .59
Access and Options . . . . . . . . . . . . . .59
1. Tools . . . . . . . . . . . . . . . . . . . . . . . . . .59
1.1 Calendar . . . . . . . . . . . . . . . . . . . .59
1.2 Alarm Clock . . . . . . . . . . . . . . . . .60
1.3 Shortcut Key . . . . . . . . . . . . . . . .61
1.4 World Clock . . . . . . . . . . . . . . . . .61
1.5 Notepad . . . . . . . . . . . . . . . . . . . .61
1.6 Calculator . . . . . . . . . . . . . . . . . . .61
1.7 Ez Tip Calc . . . . . . . . . . . . . . . . .61
1.8 Voice Command . . . . . . . . . . . . . .61
1.8.1 Start Command . . . . . . . . . .61
1.8.2 Command Mode . . . . . . . .62
1.8.3 Announce Alert . . . . . . . . . .62
1.8.4 Train Words . . . . . . . . . . . . .62
1.8.5 Best Match . . . . . . . . . . . . .62
1. Auto Save . . . . . . . . . . . . . . . . . . .51
2. Auto Erase . . . . . . . . . . . . . . . . . .51
3. TXT-Auto View . . . . . . . . . . . . . .51
4. PIX-Auto Receive . . . . . . . . . . . .51
5. TXT-Callback # . . . . . . . . . . . . . . .51
6. Edit Voice Mail # . . . . . . . . . . . . . .52
7. Entry Mode . . . . . . . . . . . . . . . . . .52
8. Quick Text . . . . . . . . . . . . . . . . . .52
9. TXT-Auto Play . . . . . . . . . . . . . . . .52
0. TXT-Signature . . . . . . . . . . . . . . . .52
MSG Erase . . . . . . . . . . . . . . . . . . . . .52
CONTACTS . . . . . . . . . . . . . . . . . . . . .53
Access and Options . . . . . . . . . . . . . .53
1. New Contact . . . . . . . . . . . . . . . . . . .53
2. Contact List . . . . . . . . . . . . . . . . . . . .54
VX8100 5
Contents
4.2.3 Auto NAM . . . . . . . . . . . . . .69
5.6 Auto Volume . . . . . . . . . . . . . . .76
6. Clock Format . . . . . . . . . . . . . . . . . .76
7. Ringer ID . . . . . . . . . . . . . . . . . . . . .76
8. Picture ID . . . . . . . . . . . . . . . . . . . . .77
9. PC Connection . . . . . . . . . . . . . . . . .77
Vehicles . . . . . . . . . . . . . . . . . . . . . . . .82
Posted Facilities . . . . . . . . . . . . . . . . .82
Aircraft . . . . . . . . . . . . . . . . . . . . . . . . .82
Blasting Areas . . . . . . . . . . . . . . . . . . .82
Potentially Explosive Atmosphere . . .82
4.2.4 Serving System . . . . . . . . .69
4.3 Device Info . . . . . . . . . . . . . . . . .69
4.3.1 My Number . . . . . . . . . . . .69
4.3.2 SW Version . . . . . . . . . . . .69
4.3.3 Icon Glossary . . . . . . . . . . .69
4.4 Manage Memory . . . . . . . . . . . . .69
4.4.1 Save Options . . . . . . . . . . . .70
4.4.2 Phone Memory . . . . . . . . .70
4.4.3 C71ard Memory . . . . . . . . .70
Using the miniSD Card . . . . . . . . .71
4.5 Location . . . . . . . . . . . . . . . . . . . .72
4.6 Security . . . . . . . . . . . . . . . . . . . .72
4.6.1 Lock Phone . . . . . . . . . . . . .72
4.6.2 Emergency #s . . . . . . . . . .73
4.6.3 Change Code . . . . . . . . . . . .73
4.6.4 Erase Contacts . . . . . . . . .73
4.6.5 Reset Default . . . . . . . . . . .74
4.7 Language . . . . . . . . . . . . . . . . . . .74
5. Call Settings . . . . . . . . . . . . . . . . . . .74
5.1 Answer Options . . . . . . . . . . . . .75
5.2 Auto Retry . . . . . . . . . . . . . . . . . .75
5.3 TTY Mode . . . . . . . . . . . . . . . . . .75
5.4 One-Touch Dial . . . . . . . . . . . . . .76
5.5 Voice Privacy . . . . . . . . . . . . . . . .76
TM
0. Bluetooth . . . . . . . . . . . . . . . . . . . .77
For Vehicles Equipped with an Air
Bag . . . . . . . . . . . . . . . . . . . . . . . . . . .82
0.1 Paired Devices . . . . . . . . . . . . . . .78
0.2 Power . . . . . . . . . . . . . . . . . . . . . .78
0.3 My Visibility . . . . . . . . . . . . . . . . .79
0.4 My Bluetooth Name . . . . . . . . . .79
0.5 My Bluetooth Info . . . . . . . . . . . .79
Transfering Audio . . . . . . . . . . . . . . . .79
Safety Information . . . . . . . . . . . . . .83
Charger and Adapter Safety . . . . . . .83
Battery Information and Care . . . . . .83
Explosion, Shock, and Fire Hazards .83
General Notice . . . . . . . . . . . . . . . . . .84
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . .80
FDA Consumer Update . . . . . . . . . .85
10 Driver Safety Tips . . . . . . . . . . . . .91
Consumer Information on SAR . . .93
TIA Safety Information . . . . . . . . . . .80
Exposure to Radio Frequency Signal 80
Antenna Care . . . . . . . . . . . . . . . . . . .80
Phone Operation . . . . . . . . . . . . . . . .80
Tips on Efficient Operation . . . . . . . .80
Driving . . . . . . . . . . . . . . . . . . . . . . . . .81
Electronic Devices . . . . . . . . . . . . . . .81
Pacemakers . . . . . . . . . . . . . . . . . . . .81
Hearing Aids . . . . . . . . . . . . . . . . . . . .81
Other Medical Devices . . . . . . . . . . .81
Health Care Facilities . . . . . . . . . . . . .82
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices . . . . . . . . . . . . . . . . . . . . . . . .95
Accessories . . . . . . . . . . . . . . . . . . . .97
Warranty Information . . . . . . . . . . . .98
Index . . . . . . . . . . . . . . . . . . . . . . . . . .100
6 VX8100
Welcome
Thank you for choosing the advanced and compact VX8100
cellular phone, designed to operate with the latest digital
mobile communication technology, Code Division Multiple
Access (CDMA). Along with the many advanced features
of the CDMA system, such as greatly enhanced voice
clarity, this phone offers:
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions:
(1) This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must
accept any interference received, including interference
that causes undesired operation.
G Large, easy-to-read, 8-line backlight LCD with status
icons.
G Paging, messaging, Voicemail, and caller ID.
G 27-key keypad.
G Long battery standby and talk time.
G Menu-driven interface with prompts for easy operation
and configuration.
G Any key answer, auto answer, auto retry, one-touch and
speed dialing with 99 memory locations.
Technical Details
The VX8100 is an all digital phone that operates on both
Code Division Multiple Access (CDMA) frequencies:
Cellular services at 800 MHz and Personal Communication
Services (PCS) at 1.9 GHz.
CDMA technology uses a feature called DSSS (Direct
Sequence Spread Spectrum) that enables the phone to
keep communication from being crossed and to use one
frequency channel by multiple users in the same specific
area. This results in a 10-fold capacity increase when
compared with analog mode. In addition, features such as
soft / softer handoff, hard handoff, and dynamic RF power
control technologies combine to reduce call interruptions.
The Cellular and PCS CDMA networks consist of MSO
(Mobile Switching Office), BSC (Base Station Controller),
BTS (Base Station Transmission System), and MS (Mobile
Station). The following table lists some major CDMA
standards.
G Bilingual (English and Spanish) capabilities.
Important Information
This user’s guide provides important information on the use
and operation of your phone. Please read all the information
carefully prior to using the phone, for the best performance
and to prevent any damage to or misuse of the phone. Any
unapproved changes or modifications will void your warranty.
VX8100 7
Welcome
TSB -74: Protocol between an IS-95A system and ANSI J-STD-008
*
1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95.
High-speed data transmission is also possible.
EV-DO system is optimized for data service and is much faster than 1xRTT system in applicable area.
CDMA Standard
Designator
TIA/EIA-95A
Description
CDMA Dual-Mode Air Interface
14.4kbps radio link protocol and inter-band operations
IS-95 adapted for PCS frequency band CDMA2000 1xRTT Air Interface
TSB-74
Basic Air Interface
ANSI J-STD-008
TIA/EIA-IS2000
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
MAS-BS
PCSC-RS
Intersystem operations
Non-signaling data comm.
Network
Service
TIA/EIA/IS-96-B
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
Speech CODEC
Short Message Service
Packet Data
Position Determination Service (gpsOne)
High Speed Packet Data
TIA/EIA/IS-707-A
CDMA2000 High Rate Packet Data Air Interface
1xEV-DO Inter-Operability Specification for CDMA2000 Access Network
Interfaces
Recommended Minimum Performance Standards for CDMA2000 High Rate
Packet Data Access Terminal
TIA/EIA/IS-856
TIA/EIA/IS-878
TIA/EIA/IS-866
1x EV-DO
Related interface
TIA/EIA/IS-890
Test Application Specification(TAS) for High Rate Packet Data Air Interface
8 VX8100
0.6 inches (1.5 cm) distance between the user’s body and
the back of the phone and have not been tested for
compliance with FCC RF exposure limits.
FCC RF Exposure Information
WARNING! Read this information before operating the
phone.
In August 1996, the Federal Communications Commission
(FCC) of the United States, with its action in Report and
Order FCC 96-326, adopted an updated safety standard for
human exposure to Radio Frequency (RF) electromagnetic
energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard
previously set by both U.S. and international standards
bodies.
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum separation distance of 8 inches (20 cm) must
be maintained between the user / bystander and the
vehicle-mounted external antenna to satisfy FCC RF
exposure requirements. For more information about RF
exposure, visit the FCC website at www.fcc.gov.
The design of this phone complies with the FCC guidelines
and these international standards.
Caution
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or
result in violation of FCC regulations.
Bodily Contact During Operation
This device was tested for typical use with the back of the
phone kept 0.6 inches (1.5 cm) from the body. To comply
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin, a
minor burn may result. Contact your local dealer for a
replacement antenna.
with FCC RF exposure requirements,
a
minimum
separation distance of 0.6 inches (1.5 cm) must be
maintained between the user’s body and the back of the
phone, including the antenna, whether extended or
retracted. Third-party belt-clips, holsters, and similar
accessories containing metallic components should not
be used. Avoid the use of accessories that cannot maintain
VX8100 9
Phone Overview
1. Earpiece
2. Flip Open the case to answer an incoming call and close to end the call.
3. LCD Screen Displays messages and indicator icons.
4. Left Soft Key Use to display the function Message menu.
5. Headset Jack
6. Clear Key Press to delete a single space or character. Press and hold to
delete entire words. Press this key once in a menu to go back one level. Use
to turn the Speaker On/Off by pressing and holding for about 3 seconds.
7. SEND Key Use to place or answer calls.
8. Side Keys Use to adjust the ringer volume in standby mode and the
earpiece volume during a call.
9. Voice Dial Key Use for quick access to Voice Dial.
10. Vibrate Mode Key Use to set the mode (from standby mode press and
hold for about 3 seconds).
20
1
21
22
2
3
4
5
23
11. Navigation Keys Use for quick access to Get PIX & FLIX, Schedule,
Mobile Web, GET IT NOW.
11
12
12. Right Soft Key Use to select an action within a menu.
13. Side Camera Key Use for quick access to Camera function (Press and hold
for about 3 seconds to use camera function on the outside/inside display).
14. END/PWR Key Use to turn the power on/off and to end a call. Also use to
return to the main menu display screen.
15. Camera Key Use for quick access to Camera function.
16. Alphanumeric Keypad Use to enter numbers and characters and select
menu items.
6
13
14
15
7
8
9
16
17
17. MiniSD Memory Card Slot Accommodates optional miniSD memory cards.
18. Lock Mode Key Use to set the lock function (from standby mode press
and hold for about 3 seconds).
10
18
19
19. Microphone
20. Camera Lens
21. Flash
22. Outside Display
23. Multifunctional keys
10 VX8100
Menus Overview
GET IT NOW
MESSAGING
RECENT CALLS
1. Get Tunes & Tones
1. Get V CAST Music
2. Get New Ringtones
3. My Ringtones
4. My Music
1. New TXT MSG
2. New PIX MSG
3. Inbox
4. Sent
5. Drafts
1. Missed
2. Received
3. Dialed
4. All
5. View Timer
5. My Sounds
6. Sync Music
6. Voicemail
7. Email
7. Manage Music
2. Get PIX & FLIX
1. Get V CAST Video
2. Get New PlX
3. My PIX
4. My FLIX
5. PIX Place
6. Take PIX
7. Take FLIX
8. Mobile IM
9. Chat
SETTINGS & TOOLS
1. Tools
1. Calendar
2. Alarm Clock
2.1. Alarm 1
CONTACTS
2.2. Alarm 2
2.3. Alarm 3
1. New Contact
2. Contact List
3. Groups
3. Shortcut Key
4. World Clock
5. Notepad
6. Calculator
7. Ez Tip Calc
8. Voice Command
4. Speed Dials
3. Get Fun & Games
4. Get News & Info
5. Get Going
6. Get Extras
VX8100 11
Menus Overview
2. Sounds
1. Master Volume
2. Call Sounds
2.1. Call Ringtone
2.2. Call Vibrate
3. Alert Sounds
3.1. PIX
3.2. TXT
3.3. Voice
3.4. Email
3.5. Page
4. Keypad Volume
5. Earpiece Volume
6. Service Alerts
6.1. ERI Sounds
6.2. Minute Beep
6.3. Call Connect
6.4. Back To Top
7. Power On/Off Sound
3. Wallpaper
6.3. Change Code
6.4. Erase Contacts
6.5. Reset Default
7. Language
5. Call Settings
1. Answer Options
2. Auto Retry
3.1. Main Screen
3.2. Front Screen
4. Display Themes
5. Fonts
6. Power On/Off Anim.
7. Status Light
4. System
1. Standalone Mode
2. Network
2.1. System Select
2.2. Set NAM
3. TTY Mode
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
6. Clock Format
1. Main Clock
2. Front Clock
7. Ringer ID
8. Picture ID
9. PC Connection
0. Bluetooth
1. Paired Devices
2. Power
2.3. Auto NAM
2.4. Serving System
3. Device Info
3.1. My Number
3.2. SW Version
3.3. Icon Glossary
4. Manage Memory
4.1. Save Options
4.2. Phone Memory
4.3. Card Memory
5. Location
3. Display
1. Banner
3. My Visibility
4. My Bluetooth Name
5. My Bluetooth Info
1.1. Personal Banner
1.2. ERI Banner
2. Backlight
2.1. Main Screen
2.2. Front Screen
2.3. Keypad
6. Security
6.1. Lock Phone
6.2. Emergency #s
12 VX8100
Getting Started with Your Phone
The Battery
Charging the Battery
To use the charger provided with your phone:
NOTE It is important to fully charge the battery before initial
Warning! Use only the charger provided with the phone.
Using any charger other than the one included with the
VX8100 may damage your phone or battery.
use of the phone.
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize talk
and standby time. The battery charge level is shown at the
top of the LCD screen.
1. Plug the end of the AC adapter into the phone’s charger
port and the other end into an electrical outlet.
2. The charge time varies depending upon the battery
level. The maximum charge time for a fully discharged
standard battery is 3.5 hours.
Installing the Battery
To install the battery, insert the bottom of the battery into
the opening on the back of the phone. Push the battery
down until the latch clicks.
Battery Charge Level
The battery charge level is shown at the top right of the
LCD screen. When the battery charge level becomes low,
the low battery sensor alerts you in three ways: Sounding
an audible tone, blinking the battery icon, and displaying
LOW BATTERY WARNING! If the battery charge level
becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.
Removing the Battery
Turn the power off. Pull the battery cover downward and
remove it. Then remove the battery by pressing the upper
area of it.
Fully Charged
Fully Discharged
VX8100 13
Getting Started with Your Phone
Turning the Phone On and Off
Making Calls
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
Turning the Phone On
1. Install a charged battery or connect the phone to an
external power source such as a cigarette lighter
charger or hands-free car kit.
2. Enter the phone number (include the area code if
needed).
2. Press
lights up.
for a few seconds until the LCD screen
3. Press
.
lf the phone is locked, enter the lock code.
Call Failed - indicates the call did not go through.
NOTE Like any other radio device, avoid any unnecessary
4. Press
to end the call.
contact with the antenna while your phone is on.
Turning the Phone Off
Correcting Dialing Mistakes
1. Press and hold
until the display turns off.
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold down
at least 2 seconds to delete all digits.
for
Signal Strength
Call quality depends on the signal strength in your area.
The signal strength is indicated on the screen as the
number of bars next to the signal strength icon: The more
bars, the better the signal strength. If the signal quality is
poor, move to an open area. If you are in a building, the
reception may be better near a window.
Redialing Calls
1. Press
twice to redial the last number you dialed.
The last 90 numbers are stored in the call history list and
you can also select one of these to redial.
14 VX8100
Receiving Calls
Signal Strength indicator. The strength of the signal received by
the phone is indicated by the number of bars displayed.
1. When the phone rings or vibrates, press
to answer.
In use indicator. A call is in progress.
* No icon indicates the phone is in standby mode.
NOTE If you press Left Soft Key
[Quiet] while the phone is ringing,
the ringing or vibration is muted for
that call.
No Service indicator. The phone is not receiving a system signal.
Digital indicator. Digital service is available.
Roaming indicator. The phone is outside of the home service area.
Battery indicator. Indicates battery charge level.
NOTE If you press Right Soft Key
[Ignore] while the phone is ringing,
the call will end.
New TXT/PIX message indicator or Browser message.
New Voicemail indicator.
Speaker Phone.
2. Press
to end the call.
1X Service indicator.
Voice Privacy.
E911 Only Mode.
SSL.
Standalone Mode
Location On Mode.
Screen Icons
When the phone is powered on, the top line
of the LCD screen displays icons indicating
the status of the phone.
TTY.
EVDO.
Announce Alert.
Bluetooth
Data Session.
Bluetooth On.
Vibrate Mode.
Missed Calls.
Bluetooth Audio
Device Connected.
Shown To All.
Sounds Off.
Alarm Only.
Schedule.
Alarm On.
VX8100 15
Quick Access to Convenient Features
Vibrate Mode
Mute Function
Use Vibrate Mode in public places. When Vibrate Mode is
set, is displayed on the screen, the key tones are
The Mute Function prevents the other party from hearing
your voice, but allows you to hear the other party.
silent, and the phone is set to vibrate.
Mute Quick Activation
1. Press Left Soft Key
Mute Quick Cancellation
1. Press Left Soft Key
[Mute] during a call.
Vibrate Mode Quick Activation
1. From standby mode press
for 3 seconds.
[Unmute] again.
Vibrate Mode Quick Cancellation
Volume Quick Adjustment
1. Press and hold
to switch to Normal Mode.
Use the side keys to adjust the earpiece and master
volumes. The upper key increases the volume and the
lower key decreases the volume.
Lock Mode
Use Lock Mode to prevent others from using your phone.
When Lock Mode is set, your 4-digit password is required
to use the phone.
The earpiece volume can only be adjusted during a call.
NOTE Key beep volume is adjusted through the Menu.
NOTE When the flip is open, you can press
(Lower Side
NOTE The lock code/password is the last 4 digits of your
phone number.
Key) for 3 seconds to set Sounds Off mode.
Press (Upper Side Key) to switch to Normal Mode.
Lock Mode Quick Activation
1. From standby mode, press
for 3 seconds.
Call Waiting
Your cellular service may offer Call Waiting. While a call is in
progress, two beeps indicate another incoming call. When
Call Waiting is enabled, you may put the active call on hold
Lock Mode Quick Cancellation
1. Press Right Soft Key
password.
[Unlock] then enter your 4-digit
16 VX8100
while you answer the other incoming call. Check with your
cellular service provider for information about this function.
2. Press the Left Key (
command prompts.
) to pause/resume the
) to select the highlighted
) to exit and return to idle
1. Press
2. Press
to receive a waiting call.
3. Press the Center Key (
option.
again to switch between calls.
4. Press the Right Key (
screen.
Caller ID
NOTE You may also start Voice commands with the designated
button on your Bluetooth device. Please check the
Caller ID displays the number of the person calling when
your phone rings. If the caller’s identity is stored in
Contacts, the name appears on the screen. Check with
your service provider to ensure they offer this feature.
manual of the Bluetooth device for further instructions.
Speed Dialing
Speed Dialing is a convenient feature that allows you to make
phone calls quickly and easily with a few keystrokes. Your
phone recalls the number from your Contacts, displays it
briefly, and then dials it. Speed Dial number 1 is for Voicemail.
Voice Command
Voice Command is a convenient feature that allows you to
activate certain features quickly and easily by verbal
command. Using this Voice Commands, you can make
phone calls and confirm Voicemail.
Dialing Single Digit Speed Dials (from 1 to 9)
Press and hold the Speed Dial number.
1. Press the Voice Command Key ( ).
OR Enter the speed dial number and press
.
2. When prompted, say "Call Someone".
Dialing Double Digit Speed Dials (from 10 to 99)
When the Headset or Bluetooth Audio Device is
connected, Voice Command options are also available on
the outside display.
Press the first digit and then press and hold the key of the
last digit.
OR Enter the first and second digits and press
.
1. Press the Voice Command Key ( ).
VX8100 17
Entering and Editing Information
Text Input Modes
Text Input
There are five modes for entering text, numbers, special
characters, and punctuation. In a text entry field, pressing
You can input and edit your Banner, Schedule, Contacts,
and Messages.
Left Soft Key
displays a pop-up list of text modes.
Key Functions
T9Word (T9) Mode
Left Soft Key: Press to scroll access the
following text input modes:
T9Word / Abc / ABC / 123 / Symbols
Use to type text using one keystroke per letter. The phone
translates keystrokes into common words by using the
letters on each key and a compressed database.
Shift: Press to change case.
Abc (Multi-tap) Mode
T9 text: T9Word -> T9WORD -> T9word
Abc text: Abc -> ABC -> abc
Use to add words to the T9 database.
123 (Numbers) Mode
Next: In T9 mode, press to display other
Use to type numbers using one keystroke per number.
matching words.
Symbols Mode
Space: Press to complete a word and insert a
space.
Use to insert special characters or punctuation. There
are 38 special characters including “SP” which inserts a
space and “LF” which forces the text to the next line.
Clear: Press to delete a single space or
character. Hold to delete words.
Punctuation: In T9 mode, press to insert
punctuation in a word and complete a sentence.
18 VX8100
Changing Letter Case
Using Abc (Multi-tap) Text Input
1. Press Left Soft Key to change to Abc mode.
to change to ABC Caps Lock.
. LG is displayed.
Using T9 and Abc text input modes you can set the
capitalization. Press
to reach the following:
2. Press
3. Press
Initial Cap (T9Word / Abc)
Only the first letter is capitalized and subsequent letters
are lower case.
Using 123 (Numbers) Text Input
1. Press Left Soft Key
to change to 123 mode.
.
Caps Lock (T9WORD / ABC)
2. Press
5551212 is displayed.
All letters are capitalized.
Lower Case (T9word / abc)
Using Symbol Text Input
All letters are in lower case.
1. Press Left Soft Key
to change to Symbols mode.
2. Press Right Soft Key
symbols or Left Soft Key
previous 12 symbols.
[Next] to view the next 12
Text Input Examples
Display the text modes and select a text mode:
[Prev] to view the
1. In a text entry field, press Right Soft Key
text modes.
to display
3. Use
to highlight the special character you want
to insert and press
to select it.
2. Press
use.
to highlight the text input mode you want to
to select the highlighted text input mode.
4. Press Left Soft Key
mode.
to change to another text
3. Press
VX8100 19
Adding Words to the T9 Database
Using T9 Mode Text Input
If a word is not in the T9 database, add it using Abc (Multi-
tap) mode text entry.
To type the message “Call the office.” follow these steps:
1. Press Left Soft Key
2. Press
to change to T9Word mode.
.
1. Press Left Soft Key
mode.
to change to Abc (multi-tap)
3. Press
4. Press
to complete the word and add a space.
2. Press
.
Bop is displayed.
3. Press Left Soft Key
to change to T9 Word mode to
.
add the word Bop to the T9 database.
Call the office. is displayed.
4. Press
to erase the existing word.
.
Using the NEXT Key
5. Press
After you have finished entering a word, if the word
displayed is not the one you want, press
cop is displayed.
to display
6. Press
.
additional choices of words from the database.
Bop is displayed.
1. Press
Good is displayed.
2. Press
.
.
The display gives you additional choices such as:
Home, Gone, Hood, etc.
20 VX8100
Contacts in Your Phone’s Memory
5. Enter a name for the phone number (up
Contacts Entries
to 22 characters) and press
.
This allows you to have easy access to your most frequently
dialed phone numbers. You may store up to 500 entries with up to
5 phone numbers each. Each entry may be up to 22 characters.
Each phone number may be up to 48 digits.
A confirmation message is displayed
briefly.
NOTE To skip name entry, press
to go to the next step.
The Basics of Storing Contacts Entries
6. The phone number reappears on
1. From standby mode, enter the phone
number you want to save (up to 48
digits).
screen. Press
to exit,
to
call the number, or Right Soft Key
[Options].
2. Press Left Soft Key
[Save].
3. Use to select Save New Contact
or Update Existing Contact and press
.
4. Use
to select the type of phone
number and press
.
Mobile 1 / Home / Work / Mobile 2 / Fax
NOTE Use Update Existing Contact to
add another phone number to a
contact already stored in memory.
VX8100 21
Contacts in Your Phone’s Memory
Options to Customize Your Contacts
5. Press
to save.
Once the basic phone number and name information is stored
in your Contacts, you can edit and/or customize the entries.
NOTE You can change the name of the group, add groups,
and delete groups (see page 54).
1. Press Right Soft Key
[Contacts] then use
to
highlight the Contact entry you want to edit.
Changing the Call Ringtone
2. Press Left Soft Key
screen.
[Edit] to access the Edit Contact
Allows you to identify who is calling by setting different
ringtones for different phone numbers in your Contacts. It
is automatically set to the default ringtone when the
Contact is saved.
3. Use
customize.
to highlight the information field you want to
1. Press Right Soft Key
highlight an entry.
[Contacts] then use
to
4. Change the data as necessary, then press
to save.
Adding or Changing the Group
Allows you to manage your Contacts entries by organizing
them into groups.
2. Press Left Soft Key
[Edit].
3. Use
to highlight Default under Ringtone and
1. Press Right Soft Key
highlight an entry.
[Contacts] then use
to
press Left Soft Key
[Set].
4. Use
5. Use
to select My Ringtones and press
to select the new ringtone and press
.
2. Press Left Soft Key
[Edit].
.
3. Use
[Set].
4. Use
to highlight Group then press Left Soft Key
NOTE Press Left Soft Key [Play] to listen to a highlighted
ringtone before you press
.
to select the Group and press
.
6. Press
to save.
No Group / Family / Friends / Colleagues / Business /
School
22 VX8100
Changing the Message Ringtone
Adding or Changing the Picture ID
Allows you to identify who is sending you a message, by
setting different ringtones for different phone numbers in
your Contacts. It is automatically set to the default ringtone
when the Contact is saved.
Allows the phone to display a picture to identify the caller.
1. Press Right Soft Key
highlight an entry.
[Contacts] then use
to
2. Press Left Soft Key
[Edit].
1. Press Right Soft Key
highlight an entry.
[Contacts] then use
to
3. Use
to highlight Picture and press Left Soft Key
[Set].
2. Press Left Soft Key
[Edit].
4. Use
to select a graphic and press
to save.
.
3. Use
to highlight Default under MSG Ringtone
5. Press
and press Left Soft Key
[Set].
4. Use
to select the new ringtone and press
.
Adding or Changing the Email
NOTE Press Left Soft Key [Play] to listen to a highlighted
Allows you to enter an Email address associated with the
Contact entry.
ringtone before you press
.
1. Press Right Soft Key
highlight an entry.
[Contacts] then use
to
5. Press
to save.
2. Press Left Soft Key
[Edit].
3. Use
to highlight Email 1 or Email 2.
to save.
4. Enter an Email address and press
VX8100 23
Contacts in Your Phone’s Memory
Adding Speed Dial
2. Press Left Soft Key
[Save].
1. Press Right Soft Key
highlight an entry.
[Contacts] then use
to
3. Use
press
to highlight Update Existing Contact and
.
2. Press Left Soft Key
[Edit].
4. Use
press
to highlight the existing Contact entry and
.
3. Use
to highlight the phone number you want to
set with a Speed Dial and press Right Soft Key
[Options].
5. Use
press
Mobile 1 / Home / Work / Mobile2 / Fax
to highlight the type of phone number and
.
4. Use
5. Enter a Speed Dial digit.
Use the keypad and press
highlight the Speed Dial digit and press
to select Set Speed Dial and press
.
6. Press
to save.
, or use
to
A confirmation message is displayed.
.
7. Press
number.
to exit or
to place a call to the phone
6. Press
7. Press
Yes.
to save.
From the Contact List Screen
1. From standby mode, press Right Soft Key
Your Contacts display alphabetically.
[Contacts].
Editing Contacts Entries
Adding Another Phone Number
2. Use
to highlight the Contact entry you want to
edit, then press Left Soft Key
[Edit].
From the Main Menu Screen
1. From standby mode, enter the phone number you want
to save (up to 48 digits).
3. Use
to highlight the phone number field you want
to add, then enter the number and press
A confirmation message is displayed.
to save.
24 VX8100
Default Numbers
Editing Stored Phone Numbers
The phone number saved when a Contact is created is the
Default Number. If more than one number is saved in a
Contact entry, another number can be saved as the Default
Number.
1. From standby mode, press Right Soft Key
Your Contacts display alphabetically.
[Contacts].
2. Use
to highlight the Contact entry you want to
edit, then press Left Soft Key
[Edit].
NOTE The Default Number cannot be deleted by itself. The entire
Contact entry can be deleted or another number can be set
as the Default Number allowing you to delete the original
saved number and keep the Contact entry.
3. Use
to highlight the phone number.
4. Edit the phone number as necessary and press
.
Editing Stored Names
Changing the Default Number
1. From standby mode, press Right Soft Key
Your Contacts display alphabetically.
[Contacts].
1. From standby mode, press Right Soft Key
Your Contacts display alphabetically.
[Contacts].
2. Use
edit, then press Left Soft Key
3. Edit the name as necessary and press
to highlight the Contact entry you want to
2. Use
to highlight the Contact entry you want to
[Edit].
edit, then press Left Soft Key
[Edit].
.
3. Use
to highlight the phone number you want to
set as the Default Number and press Right Soft Key
[Options].
4. Use
to highlight Set As Default and press
.
5. Press
to set the new number as the default.
A confirmation message is displayed.
6. Press
again to save.
VX8100 25
Contacts in Your Phone’s Memory
Deleting a Speed Dial
Deleting
Deleting a Phone Number from a Contact
1. Press Right Soft Key [Contacts].
to highlight the Contact entry, then press
1. From standby mode, press
[MENU].
2. Use
3. Use
to highlight Speed Dials, then press
.
2. Use
to highlight the Speed Dial number.
Left Soft Key
[Edit].
4. Press Right Soft Key
[Remove].
3. Use
to highlight the phone number to be deleted.
5. Use
to select Yes.
4. Press and hold
5. Press
to delete the number.
6. Press
.
.
A confirmation message is displayed.
A confirmation message is displayed.
NOTE If you try to delete the default number, an error
message will appear.
Deleting a Contact Entry
1. Press Right Soft Key
2. Use to highlight the Contact entry to be deleted.
3. Press Right Soft Key [Options].
[Contacts].
4. Press
Erase.
5. Press
Yes.
A confirmation message is displayed.
26 VX8100
Phone Numbers With Pauses
5. Press Left Soft Key
[Save].
When you call automated systems such as Voicemail or
credit billing numbers, you often have to enter a series of
numbers. Instead of entering these numbers by hand, you
can store the numbers in your Contacts separated by
special pause characters (W, P). There are two different
types of pauses you can use when storing a number:
6. Use
to select Save New Contact or Update
Existing Contact and press
.
7. Use
press
to select the type of phone number and
.
8. Enter a name (up to 22 characters) and press
A confirmation message is displayed.
.
Wait (W)
The phone stops dialing until you press Left Soft Key
[Release] to advance to the next number.
Adding a Pause to an Existing Number
1. Press Right Soft Key
[Contacts].
Pause (P)
2. Use
to highlight the Contact entry to edit, then
The phone waits 2 seconds before sending the next string of digits.
press Left Soft Key
[Edit].
Storing a Number with Pauses
3. Use
to highlight the number.
1. From standby mode, enter the number.
4. Press Right Soft Key
5. Press Wait or
[Options].
2. Press Right Soft Key
3. Use to select pause type and press
Wait / Pause
[Options].
Pause.
.
6. Enter additional number(s) and press
A confirmation message is displayed.
.
4. Enter additional number(s) (e.g., pin number or credit
card number).
VX8100 27
Contacts in Your Phone’s Memory
Searching Your Phone’s Memory
Making a Call From Your Phone’s Memory
The VX8100 phone is able to perform a dynamic search of
the contents in your phone’s memory. A dynamic search
compares entered letters or numbers against the entries in
your Contacts. A matching list is displayed in ascending
order. You can then select a number from the list to call or
edit. There are several ways to search:
Once you have stored phone numbers into your Contacts,
you can place calls to those numbers quickly and easily.
G
Press
after you have searched for a phone
number in Contacts or Recent Calls.
G
Use Speed Dialing (see page 29).
G
Scrolling Alphabetically
From Contacts
G Searching by Letter
1. Press Right Soft Key
[Contacts].
Scrolling Through Your Contacts
2. Use
3. Use
4. Press
to select the Contact entry then press
to select the phone number.
to place the call.
.
1. Press Right Soft Key
Contacts list is displayed alphabetically.
[Contacts].
2. Use to scroll through the list.
NOTE Pressing
will dial the Default Number of the
Searching by Letter
1. Press Right Soft Key
Contact entry. If multiple numbers are saved in the
[Contacts].
Contact entry, you may need to use
to select
Contacts list is displayed alphabetically.
the phone number that you want to call.
2. Press (or press repeatedly) the key on the keypad that
corresponds with the search letter.
28 VX8100
From Recent Calls
For Speed Dials From 10 to 99
1. Press the first Speed Dial digit, then press and hold the
key of the last Speed Dial digit.
1. Press
2. Press
[MENU].
to select RECENT CALLS.
OR
3. Use
.
to select the type of recent call then press
Press the first Speed Dial digit, press the second Speed
Dial digit, and then press
.
Missed / Received / Dialed / All / View Timer
2. Your phone recalls the phone number from your
Contacts, displays it briefly, and then dials it.
4. Use
to highlight the phone number.
to place the call.
For Speed Dials for 97, 98 and 99.
5. Press
Default is 97(#BAL), 98(#MIN), and 99(#PMT).
User can change this speed dial if needed.
Speed Dialing
Speed Dialing is a convenient feature that allows you to
make phone calls quickly and easily (Speed Dial 1 is for
Voicemail). Designate Speed Dials in your Contacts to use
this calling feature.
For Speed Dials From 2 to 9
1. Press and hold the Speed Dial digit.
OR
Press the Speed Dial digit, and then press
.
2. Your phone recalls the phone number from your
Contacts, displays it briefly, and then dials it.
VX8100 29
Using Phone Menus
Menu Access
GET IT NOW
Press
[MENU] or Left Soft Key
[Message] to have
GET IT NOW allows you to do more than just talk on your
phone. GET IT NOW is a technology and service that
allows you to download and use applications on your
phone. With GET IT NOW, it is quick and easy to
personalize your phone to your lifestyle and tastes. Just
download the applications that appeal to you. With a wide
range of software available, from ringtones to games to
productivity tools, you can be assured that you can find
something useful, practical, or entertaining.
access to five phone menus. There are two methods of
accessing menus and submenus:
G
Use
to highlight and select, or
G
Press the number key that corresponds to the submenu.
For example:
1. Press
[MENU].
Five menu items are displayed horizontally across the
top of the screen.
NOTE When the length of content name exceeds the limit, the
contents might not be listed or might not operate optimally.
Use
to scroll through the list of menus.
Downloading Applications
2. Use
to highlight your preferred setting and press
You can use GET IT NOW and download applications
anywhere on the Verizon Wireless network, as long as you
have a digital signal available for your handset.
to select it.
NOTE Press
to go back one step while accessing
to cancel without saving.
the menu or selecting a setting.
Incoming Calls
While downloading an application, incoming calls will
automatically be sent to your Voicemail, if available. If you
do not have Voicemail, downloading will not be interrupted
by an incoming call, and the caller will receive a busy signal.
NOTE Press
30 VX8100
GET IT NOW
When using applications, an incoming call will
automatically pause the application and allow you to
answer the call. When you complete your call, you can
resume using the application.
4. Get News & Info: Get the latest
news, stock quotes, and movie
listings on the Internet. To start,
just launch your phone’s Web
browser.
Access and Options
5. Get Going: Everything you need to
know while you are on the go.
Look for a great restaurant, the
nearest ATM, etc.
1. Press
2. Press
[MENU].
2 times to select [GET IT NOW].
3. Select a submenu.
6. Get Extras
1. Get Tunes & Tones: You can
download and play various
ringtones or songs at anytime.
G
Right Soft Key
[Info].
Memory / PIX Memory /
Ringtone Memory / View Log /
Help
2. Get PIX & FLIX: View your digital
pictures and video right on your
wireless phone. Take and trade
pictures with your friends instantly.
Shortcut You can access the GET IT NOW feature
directly by pressing
.
3. Get Fun & Games: Turn your phone
into a handheld arcade with
NOTE
You can name the file up to 36 letters. Special
characters such as + , ; = [ ] are not available.
exciting and challenging games
®
like Tetris, EverQuest and EA
TM
SPORTS Tiger Woods PGA
®
TOUR Golf.
VX8100 31
Using Phone Menus
1.1 Get V CAST Music
1. Get Tunes & Tones
Allows you to download a variety of music via V CAST
whenever and wherever you are.
Personalize your phone with ringtones. A large variety of
choices are available to choose from current hits, pop, hip-
hop, and more.
1. Press
2. Press
[MENU],
2 times,
,
.
.
Access and Options
1. Press
2. Press
3. Press
[MENU].
NOTE Additional charges for each music clip viewed may
apply. Music Clips service is not available in all
areas. Check www.verizonwireless.com/getitnow
website for details.
2 times to select [GET IT NOW].
Get Tunes & Tones.
4. Select a submenu.
1.2 Get New Ringtones
1. Get V CAST Music
2. Get New Ringtones
3. My Ringtones
4. My Music
Allows you to connect to GET IT NOW and download
various ringtones.
1. Press
2. Press
[MENU],
2 times,
.
,
.
5. My Sounds
6. Sync Music
7. Manage Music
32 VX8100
GET IT NOW
1.3 My Ringtones
1. Press
[MENU],
2 times,
Allows you to select a desired ringtone, download a new
ringtone.
,
.
2. The file Viewer Menu displays the
files you have stored on your miniSD
card, and internal memory.
1. Press
[MENU],
to highlight ringtone and press Right Soft
[Options].
Set As Ringtone: Press the corresponding
2 times,
,
.
2. Use
Key
3. Select the tune you want to play and
G
press
.
number key to set the ringtone for one of the following:
All calls / Caller ID / No Caller ID / Restricted
G
G
Set As Contact ID: Press the corresponding
number key to set the ringtone for one of the following:
Ringtone / MSG
Volume
Control
Set As Msg Tones: Press the corresponding
number key to set the ringtone for one of the following:
Previous/
Rewind
Next/ Fast
Forward
PIX / TXT / Voice / Email / Page
Play/Pause
1.4 My Music
Allows you to connect to V CAST and download a variety
of music.
VX8100 33
Using Phone Menus
NOTE To view the file list during play, press the up/down
1.6 Sync Music
navigation key.
Allows you to synchronize the music clips from PC to
your phone. You can see the confirmation screen which
displays the successful transfer.
NOTE This feature will only work if you have downloaded
one or more audio files. To download a music clip,
connect to V CAST Music.
1. Press
[MENU],
2 times,
,
.
1.5 My Sounds
Allows you to select a desired sound or record a new
sound.
1.7 Manage Music
Allows you to manage your music clips.
1. Press [MENU], 2 times,
1. Press
[MENU],
2 times,
,
.
,
.
2. Use
to highlight sound and press Right Soft Key
[Options].
G
G
Send / To PIX Place / Rename / Move / Lock / Erase
All / Sound Info
Record New: You can record and save desired
sounds.
34 VX8100
GET IT NOW
NOTE From Take PIX mode, you can change to Take FLIX
2. Get PIX & FLIX
mode by pressing the camera key
.
Quick Access to Get PIX & FLIX Feature
View, take and trade your digital pictures and video right
from your wireless phone.
2.1 Get V CAST Video
V CAST brings the world to your mobile phone with full-
motion video and sound. Catch up with what’s happening
with Video Clips from news, entertainment, sports, or
weather.
Access and Options
1. Press
[MENU].
2. Press
2 times.
Shortcut Pressing
is a hot key to Get V CAST
Video.
3. Press
Get PIX & FLIX.
4. sub-menu.
1. Press
2. Press
[MENU],
2 times,
,
.
1. Get V CAST Video
to view Video Clip categories including
News, Entertainment, Sports, and Weather.
2. Get New PIX
3. My PIX
3. Select brand and Video Clip you want to view.
4. My FLIX
Browsing, Selecting, and Playing Video Clips
5. PIX Place
6. Take PIX
7. Take FLIX
1. Press
2. Press
for GET PIX & FLIX.
for Get V CAST Video to open Video Clips
Catalog.
Shortcut
Pressing
Get PIX & FLIX.
is a hot key to
3. Press
to view Video Clip categories including
News, Entertainment, Sports, and Weather.
VX8100 35
Using Phone Menus
6. The Video clip will be automatically saved in my My
Clips and the FLIX Gallery.
4. Select content provider then press
.
5. If applicable, select sub-category then press
.
NOTE All videos are not downloadable. Only videos that
have the option to save can be downloaded.
Additional charges for each video clip viewed may
apply. Video Clips service is not available in all
areas. Check www.verizonwireless.com/getitnow
website for details.
G
To view a Streaming Video
1. Read the description of the video clip, and press
to view.
2. Select Yes to accept charges, press
Video Clip will initiate transfer.
and the
Deleting Video Clips
3. The video clip will begin playback shortly after being
selected.
1. Press
for GET PIX & FLIX.
2. Select My FLIX and press
3. Select Video to Delete.
4. Press the Right Soft Key
.
G
To download a Video Clip, if applicable
1. Read the description of the video clip and press Right
Soft Key
[Options].
[Options].
to erase Video.
2. Press
for Save Video, and press
.
5. Press
[Erase].
3. Select Yes to accept charges, press
and the
6. Select Yes and press
Video Clip will initiate download of video.
NOTE The Erase option is displayed at the third in the
4. Once video is downloaded a message will appear on
your phone, “Download Complete. Play video now?”.
WMV files downloaded from VOD.
5. Select Yes and press
to view video.
36 VX8100
GET IT NOW
Configure Alerts for New Video Clips
2.3 My PIX
Allows you to view photos that are stored in the phone.
1. Press [MENU], 2 times,
2. Select your desired picture with
Soft Key [Options].
3. Select one of the following options:
Send Sends a PIX message.
To PIX Place Accesses the Online Album (PIX Place).
1. From Video Clips Catalog, select category of content
desired.
,
.
2. Select Content Provider.
and press Right
3. Press Right Soft Key
[Options].
4. Select Alerts.
5. Select Configure Alerts and press
.
6. Select content for alerts desired and press
save.
to
Get New
Set As
Download various PIX.
Wallpaper / Picture ID
Rename the selected PIX.
Rename
2.2 Get New PIX
Lock/Unlock Lock / Unlock
Allows you to connect to GET IT NOW and download a
variety of PIX (images).
Erase
Yes / No
Yes / No
Yes / No
Erase All
Move
1. Press
2. Press
[MENU],
2 times,
,
.
.
PIX Info
Name / Date / Time / Resolution /
File Size / File Format
Zoom View
VX8100 37
Using Phone Menus
Send
Sends the FLIX message to an email
address.
Accesses the Online Album (PIX Place).
2.4 My FLIX
Allows you to view Videos that are stored in the phone.
To PIX Place
1. Press
[MENU],
2 Times,
,
.
Set As Wallpaper Main Wallpaper / Front Wallpaper
2. Select your desired Video with
to play.
and press
Rename
Move
Rename the selected FLIX.
Yes / No
Lock/Unlock
Erase
Lock / Unlock
Yes / No
G
: Adjust the volume.
G
Erase All
Video Info
Yes / No
Left Soft Key
Unmute.
: Mute /
- WMV file (VOD contents
downloaded by Brew)
Title/Description/Copyright/Time/
Size/Bit Rate
- Other files
Title/Date/Time/Resolution/Size
G
G
G
G
: Pause / Play.
: Shows the full screen
: Stop
: FF
: Rewind
NOTE To play Video Messages sent to email, please
download Apple's QuickTime 6.5. Go to
3. Press Right Soft Key
following options:
[Options] to select one of the
www.apple.com/quicktime/download to download the
free player or upgrade your existing QuickTime Player.
During the download process, when asked to choose
an installation type (Minimum, Recommended or
Custom) select Minimum for a quicker download.
NOTE The options differ as follows:
WMV : 1.Set As Wallpaper/2.Lock/Unlock/
3.Erase/4.Erase All/5.Video Info
Other files : 1.Send/2.To PIX Place/3.Set As
Wallpaper/4.Rename/5.Move/
6.Lock/Unlock/7.Erase/8.Erase
All/9.Video Info
NOTE Removing the miniSD card while transferring or
removing files may cause serious damage to the
card and its contents.
NOTE Up to 100 video files can be saved to the phone.
38 VX8100
GET IT NOW
Self Timer
Flash
Brightness
White Balance
3 seconds / 5 seconds / 10 seconds
On / Off
EV -9 to +9
Auto / Sunny / Cloudy / Tungsten /
Fluorescent
Shutter1 / Shutter2 / No Sound
Normal / Sepia / Black&White /
Negative / Solari
2.5 PIX Place
Accesses the Online Album (PIX Place).
1. Press
[MENU],
2 Times,
,
.
2.6 Take PIX
Shutter Sound
Color Effects
Lets you to take digital pictures.
1. Press
times,
[MENU],
2
Night Mode
On / Off
,
.
NOTE When the Flash is On, take the photo within 12
Short
c
ut
Pressing the Camera
Key or
inches of the subject.
3. Take a picture by pressing
.
from standby mode is a hot key to Take PIX.
4. Press Left Soft Key
My PIX.
[Save]. The picture is stored in
NOTE
You can select Flash On/Off pressing Voice
Dial Key ( ).
2. Set the brightness
press Right Soft Key
settings.
, zoom
, flash
, and
[Options] to change other
G
Select the option(s) to customize.
Resolution 1280X960 / 640X480 / 320X240 /
176X144 / 160X120
VX8100 39
Using Phone Menus
Using the Side Camera Key
2.7 Take FLIX
You can use the Side Camera Key
list when the flip is closed. The picture and the options
menu(s) are shown on the outside display.
to use the sub menu
Lets you record a video message
with sound.
1. Press
[MENU],
2 times,
1. Press the Side Camera Key
enter the Take PIX mode.
for about 3 seconds to
,
.
2. Set the brightness using Key.
Short
c
ut
Press Camera Key
twice with the flip
open. Or press Side Camera Key
when the flip is closed.
twice
3. Take a picture by pressing Side Camera Key
.
4. Press the Side Camera Key
enter the Take FLIX mode.
for about 3 seconds to
2. Set the brightness
, zoom
or press Right
Soft Key [Options] to change other settings.
5. Press the Left Key
to exit camera mode.
G
Select the option(s) to customize.
Brightness EV -9 to +9
White Balance Auto / Sunny / Cloudy / Tungsten /
Fluorescent
3. Press
to begin recording, and again to stop.
4. Press Left Soft Key
[Save]. The recorded video is
stored in My FLIX.
40 VX8100
GET IT NOW
Ending a Browser Session
3. Get Fun & Games
End a Browser session by pressing
.
Allows you to download games and applications from the
GET IT NOW server. Choose the software you want from
the list displayed on the screen.
Navigating Through the Browser
On-screen items may be presented in one of the following ways:
1. Press
2. Press
[MENU],
2 times,
.
G
Numbered options
[Get New App.].
You can use your numeric keypad or you can select the
items by moving the cursor and pressing the
appropriate Soft Keys.
4. Get News & Info
The Get News & Info feature allows you to access news,
sports, weather, and email from your Verizon Wireless
device. Access and selections within this feature are
dependent upon your service provider. For specific
information on Get News & Info access through your
phone, contact your service provider.
G
Links embedded in content
You can act on the options or the links by using the Soft
Keys just below the display screen.
G
Text or numbers
You can select the items by moving the cursor and
pressing the appropriate Soft Keys.
Quick Access to News & Info Feature
Scrolling
Get the latest news, stock quotes, and movie listings. TXT
Alerts allow you to have access to the information you
want to know.
Use
to scroll through the content if the current page
does not fit on the screen. The currently selected item is
indicated by a cursor on the screen.
1. Press
[MENU],
2 times,
.
VX8100 41
Using Phone Menus
Fast Scrolling
Left Soft Key
Press and hold
down on the current screen.
to quickly move the cursor up and
Left Soft Key
is used primarily for first options or
selecting an item but its function may change, depending
on the content displayed.
Scrolling by Page
Press the Side Keys to move up and down a page at a time.
Right Soft Key
Right Soft Key
or a menu of secondary options.
is used primarily for secondary options
Home Page
To go to the Home Page, press and hold
or
.
Entering Text, Numbers or Symbols
View Browser Menu
When prompted to enter text, the current text entry
method appears above the Right Soft Key
Symbol, Number or Word.
Press Voice Dial key ( ) to use the Browser menu.
as Alpha,
View Browser Inbox
To change the input mode, press the Right Soft Key
.
If there are any browser messages, the list is displayed
from newest to oldest.
Your list of Web messages are displayed.
To create an upper case character, press
The current text method appears above the Right Soft
Key as ALPHA , ABC or abc and allows you to shift
.
G
input case sensitivity.
Press and hold
key to view Browser Inbox.
Deleting Text/Number Entered
Soft Keys
When entering text or numbers, press
last number, letter, or symbol. Press and hold
the input field completely.
to clear the
to clear
To navigate to different screens or select special
functions, use the Soft Keys. The function associated with
the Soft Keys can change for each page and depends on
each highlighted item.
42 VX8100
Initiating a Phone Call From the Browser
You can make a phone call from the Browser if the site you
are using supports the feature (the phone number may be
highlighted and Left Soft Key
appears as Call). The
browser connection is terminated when you initiate the
call. After you end the call, your phone returns to the
screen from which you initiated the call.
5. Get Going
Everything you need to know while you’re on the go.
1. Press
2. Press
[MENU],
2 times,
.
[Get New App.].
6. Get Extras
1. Press
2. Press
[MENU],
2 times,
.
[Get New App.].
VX8100 43
Using Phone Menus
Shortcut
Pressing Left Soft Key
Message.
is a hot key to
MESSAGING
Access and Options
Text messages, PIX messages, and the Voicemail box
become available as soon as the phone is powered on.
1. Press
2. Press
[MENU].
to select [MESSAGING].
G
Check types of messages by pressing Left Soft Key
[Message].
3. Select a submenu.
G
Make a call to the callback number by pressing
1. New TXT MSG: Sends a TXT
message.
during a message check.
The phone can store up to 386 messages (1 voice
message, 50 inbox text messages, 100 inbox PIX
messages, 100 inbox PIX notification messages, 50 sent
text messages, 50 sent PIX messages, 15 draft text
messages, 20 draft PIX messages). The information
stored in the message is determined by phone mode and
service capability. Other limits to available characters per
message may exist. Please check with your service
provider for system features and capabilities.
2. New PIX MSG: Sends a PIX
message.
3. Inbox: Shows the list of received
messages.
4. Sent: Shows the list of sent messages.
5. Drafts: Shows the list of draft
messages.
6. Voicemail: Shows the number of
messages in the voicemail box.
7. Email: Read and send emails from
your email accounts.
Message Preview
You can use the "Center Key(
message when the flip is closed. The message and the
options from the menu are shown on the outside display.
)" to preview new received
8. Mobile IM: Instant message your
®
friends with MSN Messenger and
®
Yahoo Messenger.
9. Chat: Chat with Internet Messenger
1. Press the "Center Key(
)" to view new received
users.
message on the outside display.
44 VX8100
MESSAGING
2. Press the "Left Key(
)" to view later.
NOTE
4. Type your message (text or email).
5. Press [SEND].
A sending screen is displayed.
To send a page, press
[SEND NOW].
New Message Alert
There are two ways your phone alerts you to new
messages.
1. The phone displays a message on the screen.
NOTE If you send an SMS message to a phone without
SMS, you will still be notified that the message was
sent, however the message will not be received.
2. The message icon (
) is displayed on the display
screen. In the case of an urgent message, the icon will
flash and NEW TEXT MESSAGE is displayed.
Customizing the Message Using Options
NOTE If you receive the same message twice, your phone
deletes the older one and the new one is stored as a
DUPLICATE.
1. Create a new message.
2. Press Right Soft Key
[Options].
3. Select the option(s) to customize.
1. New TXT MSG
Add
Allows you to add a Graphics, Animations,
Sounds, Quick Text or Signature.
Allows you to send text messages, pages, and email. Each
message has a destination and information. These are
dependent upon the type of message you want to send.
Format Text
Allows you to change the look of the text.
Alignment / Font Size / Font Style /
Text Color / Background
The Basics of Sending a Message
1. Press Left Soft Key
, press
New TXT MSG.
Save As Draft Saves the message into the Draft folder.
2. Enter the phone number of the recipient or the email
address for an email message.
Priority Level Gives priority to the message.
Normal / High
3. Press
.
VX8100 45
Using Phone Menus
Callback #
Inserts a pre-programmed callback
number with your message.
On / Off / Edit
2. New PIX MSG
You can conveniently send a PIX Msg with sound and text
to and from any other Verizon Wireless CDMA camera
phone or any email address.
Save Quick Text Allows you to define phrases to insert as
Insert Quick Text.
The Basics of Sending a Message
Cancel
Cancels message editing and goes to
message menu.
1. Press
[MENU],
,
.
4. Complete and then send or save the message.
2. Enter the cellular phone number or email address of the
recipient.
Using Contacts to Send a Message
G
Picture phone number for a PIX message.
You can designate an entry saved in your Contacts as the
address instead of manually entering the destination.
G
Email address for an email message.
3. Press
.
1. Press Left Soft Key
2. Press Left Soft Key
, select
New TXT MSG.
NOTE To send a page, press
[SEND NOW].
[Add].
4. Type your message (text or email).
3. Use
4. Use
to highlight Contacts and press
.
5. Use
[Gallery].
Use
to highlight PIX or FLIX and Left Soft Key
to highlight the Contact entry containing the
destination and press
.
to select My PIX or My FLIX.
5. Press Left Soft Key
[Done].
Select My PIX or My FLIX and press
6. Use to highlight Sounds and Left Soft Key
[Sounds].
.
NOTE The Address feature allows multi-sending of up
to 10 total addresses.
6. Complete the message as necessary.
46 VX8100
MESSAGING
Save Quick Text
Cancel
Allows you to define phrases to insert
as Insert Quick Text.
7. Use
8. Use
9. Press
to select the sound and press
.
to highlight the Subject and enter the subject.
Cancels message editing and goes to
the Message menu.
[SEND].
A confirmation message is displayed.
4. Complete and then send or save the message.
Customizing the Message Using Options
3. Inbox
1. Create a new message.
The phone alerts you in 3 ways when you receive a new
message:
2. Press Right Soft Key
[Options].
G
By displaying a message notification on the screen.
3. Select the option(s) to customize.
G
By sounding a beep or vibrating, if set.
Preview
Shows the PIX message as it would
be seen by the recipient.
G
By blinking
message)
. (only when you get a high priority
Add Quick Text
Save As Draft
Inserts predefined phrases.
Received text messages, picture messages, and
email lists may be searched and the contents viewed.
Received messages are displayed from newest to oldest.
Saves the message into the Drafts
folder.
Priority Level
Gives priority to the message.
Normal / High
Out of Memory Warning
Remove Picture
Remove Sound
Removes a PIX or FLIX from your
message.
If the memory is full, no more messages can be received
until enough memory space becomes available. The
message INBOX FULL is displayed and new messages are
not accepted.
Removes a Sound from your
message.
VX8100 47
Using Phone Menus
Viewing Your Inbox
Message Icon Reference
1. Press
[MENU],
,
.
New/Unread Text Messages
2. Options from here:
Opened/Read Text Messages
Opened Downloaded PIX Messages
New/Unread PIX Notifications
Opened/Read PIX Notifications
Unread Downloaded PIX Messages
Priority
G
Left Soft Key
[Erase].
[Options].
G
Right Soft Key
Reply
Replies to the text or picture message
with the original message attached.
Forward
Forwards a received message to other
destination address(es).
Add To Contacts Stores the callback number, email
address, and numbers from the address
of the received message into your
Contacts.
4. Sent
Up to 100 sent messages can be stored in Sent View lists
and contents of sent messages and verify whether the
transmission was successful or not.
Lock/Unlock
Locks or unlocks the selected message.
Locked messages cannot be deleted by
the Erase Inbox and Erase All functions.
1. Press
[MENU],
,
.
2. Options from here:
Message Info Allows you to check the received
message information.
G
Press Left Soft Key
[Erase].
G
Press Right Soft Key
[Options].
Forward
Forwards a sent message to other
destination address(es).
48 VX8100
MESSAGING
Resend
Allows you to retransmit the selected
message.
5. Drafts
Displays draft messages.
Add To Contacts Stores the callback number, email
address, and numbers from the
address of the received message into
your Contacts.
1. Press
[MENU],
,
.
2. Options from here:
G
Press Left Soft Key
[Erase].
Lock/Unlock
Locks or unlocks the selected
message. Locked messages cannot
be deleted by the Erase Sent and
Erase All functions.
G
Press Right Soft Key
[Options].
Send
Allows you to send the selected
message.
Add To Contacts Stores the callback number, email
address, and numbers from the
Message Info
Allows you to check the sent message
information.
address included in the received
message into your Contacts.
Message Icon Reference
Lock/Unlock
Locks or unlocks the selected
message. Locked messages cannot
be deleted by the Erase Drafts and
Erase All functions.
Sent PIX/TXT Messages
Message delivered
Sent Failed PIX/TXT Messagess
Incomplete delivery/Pending
Priority
Message Icon Reference
Draft Text
Draft PIX
VX8100 49
Using Phone Menus
6. Voicemail
8. Mobile IM
Allows you to add new applications, and send and receive
an Instant Message at any time.
Allows you to view new voice messages recorded in the
Voicemail box. Once you exceed the storage limit, old
messages are overwritten. When you have a new voice
message, your phone will alert you.
1. Press
[MENU],
,
.
G
Start GET IT NOW.
Checking Your Voicemail Box
9. Chat
1. Press
[MENU],
,
.
Allows you to chat with Internet Messenger users.
2. Options from here:
1. Press
[MENU],
,
.
G
Press Left Soft Key
[Clear] to delete information,
Yes.
G
Launch Browser.
and then press
G
Press
to listen to the message(s).
7. Email
Allows you to send an email.
1. Press
[MENU],
,
.
G
Launch Browser.
50 VX8100
MESSAGING
Message Settings Sub-Menu Descriptions
MSG Settings
Allows you to configure ten settings for received messages.
1. Auto Save
1. Press
Soft Key
[MENU],
[MESSAGING], press Left
With this feature on, messages are automatically saved in
Sent when transmitted.
[Settings].
2. Auto Erase
2. Use
to highlight one of the settings and press
to select it.
With this feature on, read messages are automatically
deleted when you exceed the storage limit.
Auto Save
Auto Save / Prompt / Do Not Save
Auto Erase
TXT-Auto View
On / Off
3. TXT-Auto View
On / Off
Allows you to directly display the content when receiving
a message.
PIX-Auto Receive
TXT-Callback #
Edit Voice Mail #
Entry Mode
On / Off
4. PIX-Auto Receive
Allows you to directly download the content when
receiving a PIX message.
T9Word / Abc / ABC / 123
Quick Text
5. TXT-Callback #
TXT-Auto Play
TXT-Signature
On / Off
Allows you to automatically send a designated callback
number when you send a message.
None / Custom
NOTE If Entry Mode is set, it is also applied to Notepad,
and Calendar Menu.
VX8100 51
Using Phone Menus
6. Edit Voice Mail #
MSG Erase
Allows you to manually enter the access number for
Voicemail Service. This number should be only used when
a VMS access number is not provided from the network.
Allows you to erase all text messages stored in your Inbox,
Sent or Drafts folders. You can also erase all messages at
the same time.
1. Press
[MENU],
, press Right Soft Key
7. Entry Mode
[Erase].
Allows you to select the default input method including
T9Word, Abc, ABC, 123.
G
Press
[Erase Inbox] to erase all messages
stored in the Inbox.
8. Quick Text
G
G
G
Press
[Erase Sent] to erase all messages
Allows you to display, edit, and add text phrases. These
text strings allow you to reduce manual text input into
messages.
stored in Sent.
Press
[Erase Drafts] to erase all messages
stored in the Drafts folder.
9. TXT-Auto Play
Press
[Erase All] to erase all messages stored
Allows the display to automatically scroll down while
viewing messages.
in the Inbox, Sent, and Drafts folder.
2. Select Yes to erase the messages selected.
A confirmation message is displayed.
0. TXT-Signature
Allows you make/edit a signature to automatically send
with your messages.
52 VX8100
CONTACTS
1. New Contact
Allows you to add a new number to your Contacts List.
CONTACTS
The Contacts menu allows you to store names, phone
numbers and other information in your phone’s memory.
NOTE Using this submenu, the number is saved as a new
Contact. To save the number into an existing
Contact, edit the Contact entry.
Access and Options
1. Press
2. Select a submenu.
1. New Contact
[MENU].
1. Press
2. Enter the name and press
3. Use to select the phone number type.
4. Enter the number and press
[MENU],
.
.
2. Contact List
3. Groups
.
4. Speed Dials
NOTE For more detailed information, see page 21.
Shortcut Pressing Right Soft Key
is a hot key to
Contacts List.
VX8100 53
Using Phone Menus
2. Contact List
3. Groups
Allows you to view your Contacts List.
Allows you to view your grouped Contacts, add a new
group, change the name of a group, delete a group, or
send a message to everyone in the selected group.
1. Press
[MENU],
.
2. Press
to scroll through your Contacts
1. Press
2. Use
[MENU],
.
alphabetically.
to highlight a group to view then press
G
Press Right Soft Key
the following:
[Options] to select one of
.
New Contact / Erase / Send TXT MSG / Send PIX
MSG / Call
G
Press Left Soft Key
to the list.
[New] to add a new group
G
G
Press Left Soft Key
[Edit] to edit.
G
Use
to highlight a group then press Right
Press [VIEW] to view the contact information.
Soft Key
[Options] to change the name of the
group or delete the group.
Send TXT MSG / Send PIX MSG / Rename /
Erase / Add
G
Press
[VIEW] to view the contact information.
54 VX8100
CONTACTS
4. Speed Dials
Allows you to view your list of Speed Dials or designate
Speed Dials for numbers entered in your Contacts.
1. Press
[MENU],
.
2. Use
to highlight the Speed Dial position, or enter
the Speed Dial digit and press
.
to highlight the Contact then press
to highlight the number then press
Yes.
3. Use
4. Use
5. Press
.
.
A confirmation message is displayed.
VX8100 55
Using Phone Menus
Shortcut To view a quick list of all your recent calls,
press from the standby mode.
RECENT CALLS
The Recent Calls menu is a list of the last phone numbers
or Contact entries for calls you placed, accepted, or
missed. It is continually updated as new numbers are
added to the beginning of the list and the oldest entries
are removed from the bottom of the list.
1. Missed
Allows you to view the list of missed calls; up to 30 entries.
1. Press
2. Use
G
[MENU],
,
.
G
indicates a dialed call.
to highlight an entry, then
to view the entry.
G
indicates a received call.
Press
G
indicates a missed call.
G
G
Press
to place a call to the number.
Press Right Soft Key
[Options] to select:
Access and Options
Contact Details(Save) / Erase / Erase All / View Timer
1. Press
2. Press
[MENU].
G
Press Left Soft Key
[Message] to select:
to select [RECENT CALLS].
TXT MSG / PIX MSG
3. Select a submenu.
1. Missed
You can use the Center Key (
) to view the list of missed
calls when the flip is closed. The list of missed calls and the
options menu(s) are shown on the outside display.
2. Received
3. Dialed
1. Press the Center Key (
calls on the outside display.
) to view the list of missed
4. All
5. View Timer
2. Press the Left Key (
) to view later.
56 VX8100
RECENT CALLS
2. Received
3. Dialed
Allows you to view the list of incoming calls; up to 30 entries.
Allows you to view the list of outgoing calls; up to 30
entries.
1. Press
2. Use
G
[MENU],
,
.
1. Press
[MENU],
,
.
to highlight an entry, then
to view the entry.
2. Use
to highlight an entry, then
to view the entry.
Press
G
Press
G
G
Press
to place a call to the number.
G
G
Press
to place a call to the number.
Press Right Soft Key
[Options] to select:
Press Right Soft Key
[Options] to select:
Contact Details(Save) / Erase / Erase All / View Timer
Contact Details(Save) / Erase / Erase All / View Timer
G
Press Left Soft Key
[Message] to select:
G
Press Left Soft Key
[Message] to select:
TXT MSG / PIX MSG
TXT MSG / PIX MSG
VX8100 57
Using Phone Menus
4. All
5. View Timer
Allows you to view the list of all calls; up to 90 entries.
Allows you to view the duration of selected calls.
1. Press
2. Use
G
[MENU],
,
.
1. Press
2. Use
[MENU],
,
.
to highlight an entry, then
to view the entry.
to highlight a call list.
Last Call / All Calls / Received Calls / Dialed Calls /
Roaming Calls / Transmitted KB / Received KB / Total
KB / Last Reset / Lifetime Calls / Lifetime KB
Press
G
G
Press
to place a call to the number.
Press Right Soft Key
[Options] to select:
Contact Details(Save) / Erase / Erase All / View Timer
G
Press Left Soft Key
[Message] to select:
TXT MSG / PIX MSG
Shortcut To view a quick list of all your recent calls, press
from standby mode.
58 VX8100
SETTINGS & TOOLS
1. Tools
SETTINGS & TOOLS
The SETTINGS & TOOLS menu has options to customize
your phone.
Your phone tools include a Calendar, Alarm Clock, Shortcut
Key, World Clock, Notepad, Calculator, Ez Tip Calc and
Voice Command.
Access and Options
Access and Options
1. Press
2. Press
[MENU].
1. Press
2. Press
3. Press
[MENU].
2 times to select [SETTINGS & TOOLS].
2 times to select [SETTINGS & TOOLS].
3. Select a submenu.
1. Tools
Tools.
4. Select a submenu.
Calendar, Alarm Clock, Shortcut
2. Sounds
3. Display
Key, World Clock, Notepad,
Calculator, Ez Tip Calc, and Voice
Command
4. System
5. Call Settings
6. Clock Format
7. Ringer ID
8. Picture ID
9. PC Connection
0. Bluetooth
1.1 Calendar
Allows you to keep your agenda convenient and easy to
access. Simply store your appointments and your phone
will alert you with a reminder of your appointments.
VX8100 59
Using Phone Menus
1.2 Alarm Clock
1. Press
2. Use
[MENU],
2 times,
,
.
Allows you to set one of three alarms. The current time is
displayed at the top of the screen when you select an
alarm to set. At the alarm time, Alarm 1 (or 2 or 3, as
applicable) will be displayed on the LCD screen and the
alarm will sound.
to highlight the scheduled day.
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
1. Press
[MENU],
2 times,
,
.
3. Press Left Soft Key
[Add].
2. Use
to highlight an Alarm (1, 2, or 3), then press
.
4. Enter your schedule information including:
G
3. Enter the alarm information including:
Appoint Name
G
Turn On/Off
G
Set Date
G
Set Time
G
Set Time
G
Recurrence
G
Recurrence
G
Ringtones
G
Alert
4. Use
to highlight the information you want to set,
then press Left Soft Key
[Set] to view your choices.
5. To enter your schedule information, use
to
highlight the information field, then press Left Soft Key
5. Press
as necessary.
[SAVE] after setting all of the Alarm fields
[Set] to view your choices.
6. Use
to highlight a setting, then press
.
When an alarm goes off, pressing
Can only press
does not work.
7. Press
as necessary.
[SAVE] after setting all of the Calendar fields
.
60 VX8100
SETTINGS & TOOLS
1.3 Shortcut Key
1.6 Calculator
Allows you to set a shortcut to Messaging, Recent Calls,
Contacts, Settings, Tools, Get Tunes & Tones, My PIX ,
Get Fun & Games or Get News & Info using the Down
Navigation key.
Allows you to perform simple mathematical calculations.
You can enter numbers up to the second decimal place.
Calculations can be made with up to 3 lines at one time.
1. Press
[MENU],
2 times,
,
.
1. Press
[MENU],
2 times
,
.
NOTE To insert a decimal, press
. To insert , press
An explanation message is displayed.
.
2. Press
to continue.
1.7 Ez Tip Calc
3. Select the shortcut, then press
.
Allows you to quickly and easily calculate bill amounts
using the bill total, tip, and number of people as variables.
1.4 World Clock
1. Press
[MENU],
2 times,
,
.
Allows you to determine the current time in another time
zone or country.
1.8 Voice Command
1.8.1 Start Command
1. Press
[MENU],
2 times,
,
.
NOTE With Left Soft Key
[Set DST], set to daylight
saving time.
Allows you to make phone calls quickly and easily by
verbal command. Your phone recalls the number from
your Contacts, displays it briefly, and then dials it.
1.5 Notepad
Allows you to read, add, edit, and erase notes to yourself.
1. Press [MENU], 2 times,
2. Press Left Soft Key [Add] to write a new note.
1. Press
[MENU],
2 times,
,
,
.
,
.
2. When prompted, say “Please Say a Command”.
VX8100 61
Using Phone Menus
3. When prompted, say the name of the Contact you
want to call. The phone will ask you to confirm the
name before dialing.
1.8.5 Best Match
After you say a name or a number, your phone displays
the recognition results—the name or number that best
matches the one you said—and asks you to confirm.
Select the number of results that you want your phone
to display.
1.8.2 Command Mode
1. Press
[MENU],
2 times,
,
,
.
2. Select Normal / Speed then press
.
1. Press
[MENU],
2 times,
,
,
.
2. Select 1 Match / 4 Match then press
.
1.8.3 Announce Alert
G
1 Match: Displays the name or number that best
matches the one you said.
1. Press
[MENU],
2 times,
,
,
.
G
4 Match: Displays the four names or numbers that
best match the one you said and asks you if the first
one is correct. If you say "Yes", the phone places the
call. If you say "No", the phone suggests the second
one in the list, and so on, up to the fourth result.
2. Select Disable / Announce / Announce + Ring then
press
.
1.8.4 Train Words
Command Train is an optional personalization feature
that helps your phone recognize the way you
pronounce commands. If you do not get consistently
good results with the commands, perform this brief,
one-time session.
1. Press
2. Select Voice Command / Answer / Digit Dial then
press
[MENU],
2 times,
,
,
.
.
3. Follow the prompts.
62 VX8100
SETTINGS & TOOLS
2.2 Call Sounds
2. Sounds
Allows you to set ringtones for types of incoming calls.
Provides options to customize the phone’s sounds.
1. Press
[MENU],
2 times,
,
.
Access and Options
2.2.1 Call Ringtone
1. Press
2. Press
3. Press
[MENU].
1. Press
[MENU],
2 times,
,
,
.
2 times to select [SETTINGS & TOOLS].
G
Sounds.
Select Caller ID / No Caller ID / Restrict Calls /
All Calls.
4. Select a submenu.
G
Use
to select a ringtones then press
to
.
save the sound.
Master Volume, Call Sounds, Alert
Sounds, Keypad Volume, Earpiece
Volume, Service Alerts and Power
On/Off Sound.
2.2.2 Call Vibrate
1. Press
[MENU],
2 times,
,
,
G
Use
On / Off
to select a setting, then press
.
2.1 Master Volume
Allows you to set volume settings.
1. Press [MENU], 2 times,
then press
,
.
2. Adjust the volume with
the setting.
to save
VX8100 63
Using Phone Menus
2.3 Alert Sounds
2.6 Service Alerts
Allows you to select the alert type for a new message.
Allows you to set any of the four Alert options to either On
or Off.
1. Press
[MENU],
2 times,
,
.
1. Press
[MENU],
2 times,
,
.
G
Select PIX / TXT / Voice / Email / Page.
2. Select an alert option.
Use
to select then press
to save the
sound.
ERI Sounds
2.4 Keypad Volume
Alerts you to the status of cellular service.
Allows you to set the keypad volume.
Minute Beep
1. Press
[MENU],
2 times,
then press
,
.
Alerts you 10 seconds before the end of every minute
during a call.
2. Adjust the volume with
the setting.
to save
Call Connect
2.5 Earpiece Volume
Alerts you when the call is connected.
Allows you to set the earpiece volume.
Back To Top
1. Press
[MENU],
2 times,
,
.
Alerts you when you scroll through the end of a menu
list.
2. Adjust the volume with
the setting.
then press
to save
3. Select an option and press
4. Use to select a setting, then press
On / Off
.
.
64 VX8100
SETTINGS & TOOLS
2.7 Power On/Off Sound
3. Display
Allows you to set the phone to sound a tone when the
phone is powered on/off.
Provides options to customize the phone’s display screen.
Access and Options
1. Press
[MENU],
2 times,
,
.
1. Press
2. Press
3. Press
[MENU].
2. Use
to select a setting, then press
.
2 times to select [SETTINGS & TOOLS].
On / Off
Display.
4. Select a submenu.
Banner, Backlight, Wallpaper,
Display Themes, Fonts ,
Power On/Off Anim. and Status
Light
VX8100 65
Using Phone Menus
3.1 Banner
3.2 Backlight
Allows you to enter a string of up to 23 characters which
displays on the LCD screen.
Allows you to set the duration for illuminating the backlight.
Main Screen, Front Screen and Keypad are set separately.
1. Press
[MENU],
2 times,
,
.
1. Press
[MENU],
2 times,
,
.
2. Choose a Backlight submenu and press
Main Screen / Front Screen / Keypad
.
3.1.1 Personal Banner
1. Press [MENU],
2 times,
,
,
.
1. Main Screen
G
2. Choose a Banner submenu and press
Main Screen / Front Screen
.
7 Seconds
15 Seconds
30 Seconds
G
G
3. Enter your banner text then press
[SAVE].
G
Always On means that the backlight is always on.
Always Off means that the backlight is never on.
G
3.1.2 ERI Banner
2. Front Screen
1. Press
2. Use
[MENU],
2 times,
,
,
.
G
7 Seconds
15 Seconds
30 Seconds
G
to select a setting, then press
.
G
On / Off
G
Always Off means that the backlight is never on.
If you use ERI Service, ERI Text is Shown on the sub
banner.
3. Keypad
G
7 Seconds
G
G
G
G
15 Seconds
30 Seconds
Always On means that the backlight is always on.
Always Off means that the backlight is never on.
66 VX8100
SETTINGS & TOOLS
3.3 Wallpaper
3.5 Fonts
Allows you to choose the kind of background to be
displayed on the phone.
Allows you to set the font size.
1. Press
[MENU],
2 times,
,
,
,
.
.
.
1. Press
[MENU],
2 times,
,
.
2. Use
to select a setting, then press
.
.
.
2. Choose a Wallpaper submenu and press
.
Normal / Large
Main Screen / Front Screen
3.6 Power On/Off Anim.
3. Choose a submenu and press
.
Allows you to choose the animation.
My PIX / My FLIX
1. Press
[MENU],
2 times,
4. Select from available screens then press
.
2. Use
to select a setting, then press
NOTE Do not install or remove the miniSD Card while in
Animation 1 / Animation 2
use.
3.7 Status Light
NOTE Files more than 5MB are not available in Set As.
Allows you to turn the Front LED on or off.
3.4 Display Themes
1. Press
[MENU],
2 times,
Allows you to choose the color of the background screen.
2. Use
to select a setting, then press
1. Press
[MENU],
2 times,
,
.
On / Off
2. Use
to select a setting, then press
.
Default / Business / Tropical / Blue
VX8100 67
Using Phone Menus
4.1 Standalone Mode
4. System
Allows you to use the menu functions except making
calls, bluetooth, and web accessing, when the radio
transmission is restricted.
The System menu allows you to designate specific system
network settings.
Access and Options
1. Press
[MENU],
2 times,
,
.
.
1. Press
2. Press
3. Press
[MENU].
2. Use
to select a setting, then press
.
2 times to select [SETTINGS & TOOLS].
On / Off
System.
4.2 Network
4. Select a submenu.
1. Press
[MENU],
2 times,
,
Standalone Mode, Network, Device
Info, Manage Memory, Location,
Security and Language.
4.2.1 System Select
Allows you to set up the phone producer’s management
environment. Leave this setting as the default unless
you want to alter system selection as instructed by your
service provider.
1. Press
[MENU],
2 times,
,
,
.
2. Use
to select a setting, then press
.
Home Only / Automatic
68 VX8100
SETTINGS & TOOLS
4.2.2 Set NAM
4.3 Device Info
Allows you to select the phone’s NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press
4.3.1 My Number
Allows you to view your phone number.
1. Press [MENU], 2 times,
[MENU],
2 times,
,
.
1. Press
[MENU],
2 times,
,
,
.
,
,
.
2. Use
to select a setting, then press
.
NAM1 / NAM2
4.2.3 Auto NAM
4.3.2 SW Version
Allows you to view the software, PRL, ERI, browser, and
GET IT NOW version.
Allows the phone to automatically switch between
programmed telephone numbers corresponding to the
service provider area.
1. Press
[MENU],
2 times,
,
,
.
4.3.3 Icon Glossary
Allows you to view all the icons and their meanings.
1. Press [MENU], 2 times,
1. Press
[MENU],
2 times,
,
,
.
2. Use
to select a setting, then press
.
,
,
.
On / Off
4.2.4 Serving System
4.4 Manage Memory
NOTE • Do not install or remove the miniSD card while
playing, deleting, moving, recording or downloading
the PIX/FLIX/Sound.
Identifies the channel number of a system that is served
and a SID Number. This information is only for technical
support.
•
•
Up to 512 Mbytes can be saved in the miniSD card.
Up to 1500 per My PIX/My FLIX/My Sounds folder.
When the maximum of 1500 files is reached, files
cannot be transferred to card regardless of
remaining available capacity.
1. Press
[MENU],
2 times,
,
,
.
VX8100 69
Using Phone Menus
•
Up to 54 characters, including folder names, are
supported as file names in the miniSD card.
4. Select Erase/Move, then press
5. Select the file using , or press Right Soft Key
Mark All, then press Left Soft Key Done.
.
4.4.1 Save Options
You can choose to save a photo, video, or sounds into
the phone or the card. If the capacity of default memory
is full, it is saved to another memory.
6. Press
to select Yes.
4.4.3 Card Memory
1. Press
[MENU],
2 times,
,
,
.
Shows the memory information save in the card.
2. Use
to select a setting, then press
.
.
1. Press
[MENU],
2 times,
,
,
.
PIX / FLIX / Sounds
2. Use
to select a setting, then press
.
3. Use
to select a setting, then press
Memory Usage / My PIX / My FLIX / My Music /
My Sounds
Phone Memory / Card Memory
4.4.2 Phone Memory
Shows the memory information saved in your phone.
3. If you select one of My PIX/My FLIX/My Music/
My Sounds, you can erase or move the file. Press
Right soft Key
4. Select Erase/Move, then press
5. Select the file using , or press Right Soft Key
Mark All, then press Left Soft Key Done.
6. Press to select Yes.
[Options] .
1. Press
2. Use
[MENU],
2 times,
,
,
.
.
to select a setting, then press
.
Memory Usage / My PIX / My FLIX / My Music /
My Sounds
3. If you select one of My PIX/My FLIX/My Music/
My Sounds, you can erase or move the file. Press
Right soft Key
[Options] .
70 VX8100
SETTINGS & TOOLS
PIX
Using the miniSD Card
The VX8100 can access the following file types stored on
the removable miniSD card:
My PIX: gif, png, jpg, bmp
My Sounds: qcp, mid
My FLIX: 3gp, 3g2
My Music: wma
Memory Usage
PIX
Stored to the phone,
miniSD Card, and
can be copied to the
Desktop.
Pictures received
from other users.
YES
YES
Download via a GET
IT NOW application.
Stored to the phone
only.
Removable memory storage functionality
The following grids depict what can be transferred to the
removable miniSD card.
Information can be
stored to the phone,
miniSD Card, and can
be copied to the
Desktop.
User generated
pictures.
RINGTONES
YES
Memory Usage
Ring Tone
Stored to phone.
Protected content
YES cannot be moved to
miniSD Card or
Desktop.
Downloaded via GET IT
NOW application.
Stored to the
phone only.
YES
NO
Pictures received
from PIX Place.
Saved to a removable
miniSD card.
Stored to the
phone only.
Only ringtones
downloaded via
“GET IT NOW”
can be assigned.
Saving a sound file to the
miniSD card & assigning NO
it as a ring tone.
VX8100 71
Using Phone Menus
FLIX
4.5 Location
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
Memory Usage
FLIX
1. Press
2. Use
[MENU],
2 times,
,
.
Stored to the phone,
to select a setting, then press
.
Video Clips received from
other users.
miniSD Card, and can
be copied to the
Desktop.
YES
YES
YES
Location On / E911 Only
NOTE GPS satellite signals are not always transmitted,
especially under bad atmospheric and environmental
conditions, indoors, etc.
Video Clips downloaded
via GET IT NOW.
Stored to the phone
only.
Video Clips downloaded via
VCAST application.
Stored to the phone
only.
4.6 Security
The Security menu allows you to secure the phone
electronically.
Stored to phone,
miniSD card, and it
can be copied to the
Desktop.
User generated video
YES
YES
1. Press
[MENU],
2 times,
,
.
4.6.1 Lock Phone
Stored to phone.
Protected content
cannot be moved to
miniSD Card or
Desktop.
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode until the lock
code is entered. You can receive phone calls and still
make emergency calls. You can modify the lock code
using the New Lock code within the Security menu.
Video Clips received from
PIX Place.
1. Press
[MENU],
2 times,
,
.
72 VX8100
SETTINGS & TOOLS
2. Enter the four-digit lock code.
The lock code is: the last 4 digits of your mobile
phone number if it is set.
4. Select emergency number using
.
5. Enter an emergency phone number then press
.
The last 4 digits of ESN if your mobile phone number
is not set.
4.6.3 Change Code
Allows you to enter a new four-digit lock code.
3. Press
Lock Phone.
1. Press
2. Enter the four-digit lock code.
3. Press Change Code.
[MENU],
2 times,
,
.
4. Select an option then press
.
Unlock
Lock
The phone is never locked (Lock
mode can be used).
The phone is always locked. When
locked, you can receive incoming
calls and only make emergency calls.
4. For confirmation, it will ask you to enter the new lock
code again.
On Power Up The phone is locked when it is turned
on.
4.6.4 Erase Contacts
Allows you to erase all of your Contacts at once.
4.6.2 Emergency #s
1. Press
[MENU],
2 times,
,
.
Allows you to enter 3 emergency numbers. You can call
these emergency numbers and 911, even when the
phone is locked or restricted.
2. Enter the four-digit lock code.
3. Press
4. Press
Erase Contacts.
1. Press
2. Enter the four-digit lock code.
3. Press Emergency #s.
[MENU],
2 times,
,
.
Yes.
NOTE There is no confirmation message before all of your
Contacts are erased? As soon as Yes is selected, they
are gone!
VX8100 73
Using Phone Menus
4.6.5 Reset Default
Allows you to reset your phone to the factory default settings.
1. Press [MENU], 2 times,
2. Enter the four-digit lock code.
5. Call Settings
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
,
.
Access and Options
3. Press
4. Press
5. Press
Reset Default.
1. Press
2. Press
3. Press
[MENU].
after reading the warning message.
2 times to select [SETTINGS & TOOLS].
Revert.
Call Settings.
A confirmation message is displayed briefly before
the phone resets itself.
4. Select a submenu.
4.7 Language
Answer Options, Auto Retry,
TTY Mode, One-Touch Dial,
Voice Privacy and Auto Volume.
Allows you to set the bilingual feature according to your
preference. Choose between English and Spanish.
1. Press
[MENU],
2 times,
,
.
2. Use
to select a setting, then press
.
English / Spanish
74 VX8100
SETTINGS & TOOLS
5.1 Answer Options
5.2 Auto Retry
Allows you to determine how to handle an answered call.
Allows you to set the length of time the phone waits before
automatically redialing a number when the attempted call
fails.
1. Press
[MENU],
2 times,
,
.
2. Use
to select a setting, then press
.
1. Press
2. Use
[MENU],
2 times,
,
.
Flip Open / Any Key / Send Only / Auto Answer
to select a setting, then press
.
NOTE When the flip is closed, the Auto Answer Mode will
not function, except when connected to a headset or
hands-free car kit. When the flip is open, the Auto
Answer Mode will only function when the Speaker
Mode is set to On. The Auto Answer will function
after about five (5) seconds.
Off / Every 10 seconds / Every 30 seconds / Every 60
seconds
5.3 TTY Mode
Allows you to attach a TTY device enabling you to
communicate with parties also using a TTY device. A
phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into
characters and then displayed on the TTY.
When Ringer is set to mute such as below settings, Ringer
is not activated.
G
When Silence All / All Sounds Off / Alarm Only is set or
individual contact Ringer ID is set to No Ring / Silence.
1. Press
[MENU],
2 times,
,
.
When Ringer is set to mute with side key or "Quiet".
An explanation message is displayed.
2. Press
3. Use
to continue.
to select a setting, then press
.
TTY Full / TTY + Talk / TTY + Hear / TTY Off
VX8100 75
Using Phone Menus
5.4 One-Touch Dial
2. Use
On / Off
to select a setting, then press
.
Allows you to initiate a speed dial call by pressing and
holding the speed dial digit. If set to Disable, Speed Dial
numbers designated in your Contacts will not function.
6. Clock Format
Allows you to choose the kind of clock to be displayed on
the LCD screen.
1. Press
[MENU],
2 times,
,
.
2. Use
to select a setting, then press
.
On / Off
1. Press
2. Press
3. Use
[MENU],
2 times,
.
Main Clock or
Front Clock.
5.5 Voice Privacy
Allows you to set the voice privacy feature for CDMA calls
as Enhanced or Standard. CDMA offers inherent voice
privacy. Check with your service provider for availability.
to select a setting, then press
.
Normal / Analog (or Minimize)
1. Press
[MENU],
2 times,
,
.
7. Ringer ID
2. Use
to select a setting, then press
.
Allows you to set a designated ringer ID when the phone
rings.
Enhanced / Standard
1. Press
[MENU],
2 times,
.
5.6 Auto Volume
2. Use
to select a setting, then press
.
Provides a better audio experience by enabling the Auto
Volume feature to control the dynamic range and volume
of the sending and receiving voice across different levels
of speaker and environments.
On / Off
1. Press
[MENU],
2 times,
,
.
76 VX8100
SETTINGS & TOOLS
TM
8. Picture ID
0. Bluetooth
The VX8100 is compatible with devices that support the
Allows you to set the phone to display the designated
picture ID when the phone rings.
Bluetooth headset and hands-free profile(s) . You may
*
create and store 20 pairings within the VX8100 and
connect to one device at a time. The approximate
communication range for Bluetooth wireless technology
is up to 30 feet (10 meters).
1. Press
[MENU],
2 times,
.
2. Use
to select a setting, then press
.
On / Off
NOTE Read user guide of each bluetooth accessory that you
are trying to pair with your phone because the
instructions may be different.
9. PC Connection
Allows you to select the data port.
Access and Options
1. Press
[MENU],
2 times,
.
1. Press
2. Press
3. Press
[MENU].
2. Use
to select a setting, then press
.
2 times to select [SETTINGS & TOOLS].
USB / RS-232C(COM Port) / Bluetooth / Closed
Bluetooth.
NOTE If you want to use the bluetooth function connecting
PC, the PC or PDA should be paired with the phone.
If it's not, you can not use bluetooth PC connection,
even if Bluetooth port is selected.
4. Select a submenu.
Paired Devices, Power, My Visibility,
My Bluetooth Name and My Bluetooth
Info.
VX8100 77
Using Phone Menus
0.1 Paired Devices
7. Once pairing is successful, select Yes
and press
Pairing is the process that allows the handset to locate,
establish and register 1-to-1 connection with the target
device.
to connect with the device.
8. Once connected, you will see the device listed in the
Paired Devices menu and the Bluetooth connected
For pairing new Bluetooth device
icon
will show up on your idle screen.
1. Press
[MENU],
2 times,
,
.
0.2 Power
Set the desired device to pairing.
Allows you to set the power On/Off.
2. Follow the Bluetooth accessory instructions to set the
device to pairing mode.
1. Press
[MENU],
2 times,
,
.
2. Use
to select a setting, then press
.
3. Press Right Soft Key
and press
for New. Select Search New
On / Off
.
4. If Bluetooth is set to off, you will be prompted to turn
power on. Select Yes and press
NOTE By default, your device’s Bluetooth functionality is
.
turned off.
5. The device will appear in the Found Devices menu
once it has been located. Highlight the device and
press
.
6. The handset will prompt you for the passkey. Consult
the Bluetooth accessory instructions for the
appropriate passkey (typically “0000” - 4 zeroes). Enter
the passkey and press
.
Phone does not support Bluetooth OBEX Profiles.
* For vehicle/accessory compatibility go to
www.verizonwireless.com/bluetoothchart
78 VX8100
SETTINGS & TOOLS
0.3 My Visibility
0.5 My Bluetooth Info
Allows you to set Hidden/Shown To All.
Allows you to view the information of the bluetooth.
1. Press [MENU], 2 times,
1. Press
[MENU],
2 times,
,
.
,
.
2. Use
to select a setting, then press
.
Transfering Audio
Hidden / Shown To All
When a Bluetooth audio device is connected, Use
Bluetooth/ Use Phone is displayed in the options menu
for call state.
NOTE If you turn on My Visibility, your device is able to be
searched by other in-range Bluetooth devices.
G
Use Bluetooth When this option is selected from the
0.4 My Bluetooth Name
menu, sound comes from the Bluetooth
audio device.
Allows you edit the name of the bluetooth name.
G
Use Phone
When this option is selected from the
menu, sound comes from the handset.
1. Press
2. Press
[MENU],
2 times,
,
.
to clear the existing name.
NOTE Phone does not support Bluetooth OBEX Profiles.
* For vehicle/accessory compatibility go to
3. Use the numeric keypad to enter a new custom name.
4. Press to save and exit.
www.verizonwireless.com/bluetoothchart.
VX8100 79
Safety
For example, over 120 scientists, engineers, and
physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
TIA Safety Information
The following is the complete TIA Safety Information for
wireless handheld phones.
The design of your phone complies with the FCC
guidelines (and those standards).
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When it is ON, it receives
and also sends out Radio Frequency (RF) signals.
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate
FCC regulations.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines with
safety levels for handheld wireless phones. Those
guidelines are consistent with the safety standards
previously set by both U.S. and international standards
bodies:
Phone Operation
NORMAL POSITION: Hold the phone as you would any
other telephone with the antenna pointed up and over your
shoulder.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Tips on Efficient Operation
American National Standards Institute; National Council
on Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection
For your phone to operate most efficiently:
Do not touch the antenna unnecessarily when the phone
is in use. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power level
than otherwise needed.
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific literature.
80 VX8100
Driving
Persons with pacemakers:
G
Should ALWAYS keep the phone more than six (6)
inches from their pacemaker when the phone is
turned ON;
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
G
Should not carry the phone in a breast pocket;
G
G
Should use the ear opposite the pacemaker to
minimize the potential for interference;
Give full attention to driving -- driving safely is your first
responsibility;
G
G
G
Should turn the phone OFF immediately if there is any
reason to suspect that interference is taking place.
Use hands-free operation, if available;
Pull off the road and park before making or answering
a call if driving conditions or the law so require.
Hearing Aids
Electronic Devices
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your service provider (or call the
customer service line to discuss alternatives). Optional
for each phone manufacturer.
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6) inches
be maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with
the independent research by and recommendations of
Wireless Technology Research.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be
able to assist you in obtaining this information.
VX8100 81
Safety
Health Care Facilities
Potentially Explosive Atmosphere
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may use equipment that
could be sensitive to external RF energy.
Turn your phone OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often,
but not always marked clearly. Potential areas may
include: fueling areas (such as gasoline stations); below
deck on boats; fuel or chemical transfer or storage
facilities; vehicles using liquefied petroleum gas (such as
propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal
powders); and any other area where you would normally
be advised to turn off your vehicle engine.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices
so require.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Aircraft
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your
phone OFF when in a “blasting area” or in areas posted:
“Turn off two-way radio”. Obey all signs and instructions.
82 VX8100
G
G
G
G
Recharge the battery after long periods of non-use to
maximize battery life.
Safety Information
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible place
at all times after reading it.
Battery life will vary due to usage patterns and
environmental conditions.
Use of extended backlighting, Browser, and data
connectivity kits affect battery life and talk/standby times.
Violation of the instructions may cause
minor or serious damage to the product.
The self-protection function of the battery cuts the
power of the phone when its operation is in an abnormal
state. In this case, remove the battery from the phone,
reinstall it, and turn the phone on.
Charger and Adapter Safety
G
The charger and adapter are intended for indoor use only.
Explosion, Shock, and Fire Hazards
Battery Information and Care
G
Do not put your phone in a place subject to excessive
dust and keep the minimum required distance between
the power cord and heat sources.
G
Please dispose of your battery properly or take it to your
local wireless carrier for recycling.
The battery does not need to be fully discharged before
recharging.
G
Unplug the power cord prior to cleaning your phone,
and clean the power plug pin when it is dirty.
G
G
When using the power plug, ensure that it is firmly
G
Use only LG-approved chargers specific to your phone
connected. If it is not, it may cause excessive heat or fire.
model since they are designed to maximize battery life.
G
G
If you put your phone in a pocket or bag without
Do not disassemble or short-circuit the battery.
covering the receptacle of the phone (power plug pin),
metallic articles (such as a coin, paperclip or pen) may
short-circuit the phone. Always cover the receptacle
when not in use.
G
Keep the battery’s metal contacts clean.
Replace the battery when it no longer provides
acceptable performance. The battery can be
recharged several hundred times before replacement.
G
VX8100 83
Safety
G
G
Do not short-circuit the battery. Metallic articles such
as a coin, paperclip or pen in your pocket or bag may
short-circuit the + and – terminals of the battery (metal
strips on the battery) upon moving. Short-circuit of the
terminal may damage the battery and cause an
explosion.
Do not immerse your phone in water. If this happens,
turn it off immediately and remove the battery. If the
phone does not work, take it to an LG Authorized
Service Center.
G
The power cord on this product will expose you to
lead, a chemical known to the State of California to
cause cancer birth defects or other reproductive
harm. Wash hands after handling.
General Notice
G
G
Do not paint your phone.
G
Using a damaged battery or placing a battery in your
mouth may cause serious injury.
The data saved in your phone might be deleted due to
careless use, repair of the phone, or upgrade of the
software. Please backup your important phone
numbers. (Ring tones, text messages, voice messages,
pictures, and videos could also be deleted.)
The manufacturer is not liable for damage due to the
loss of data.
G
Do not place items containing magnetic components
such as a credit card, phone card, bank book, or subway
ticket near your phone. The magnetism of the phone may
damage the data stored in the magnetic strip.
G
Talking on your phone for a long period of time may
reduce call quality due to heat generated during use.
G
G
When you use the phone in public places, set the
ringtone to vibration so as not to disturb others.
G
When the phone is not used for a long period time, store
it in a safe place with the power cord unplugged.
Do not turn your phone on or off when putting it to your
ear.
G
Using the phone in proximity to receiving equipment
(i.e., TV or radio) may cause interference to the phone.
G
Do not use the phone if the antenna is damaged. If a
damaged antenna contacts skin, it may cause a slight
burn. Please contact an LG Authorized Service Center
to replace the damaged antenna.
84 VX8100
2. What is the FDA's role concerning the safety of
wireless phones?
FDA Consumer Update
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit Radio Frequency (RF) energy at a level that is
hazardous to the user. In such a case, the FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace, or recall
the phones so that the hazard no longer exists.
The U.S. Food and Drug Administration’s Center for
Devices and Radiological Health Consumer Update on
Mobile Phones:
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
Radio Frequency (RF) energy in the microwave range
while being used. They also emit very low levels of RF
when in the standby mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes
no known adverse health effects. Many studies of low
level RF exposures have not found any biological effects.
Some studies have suggested that some biological effects
may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
Although the existing scientific data do not justify FDA
regulatory actions, the FDA has urged the wireless phone
industry to take a number of steps, including the following:
G
Support needed research into possible biological
effects of RF of the type emitted by wireless phones;
G
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
G
Cooperate in providing users of wireless phones with
the best possible information on possible effects of
wireless phone use on human health.
VX8100 85
Safety
The FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
lower than those they can get from wireless phones.
Base stations are thus not the subject of the safety
questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones. These types of
wireless phones can expose the user to measurable
Radio Frequency (RF) energy because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines
that were developed with the advice of the FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the exposure
to RF is drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called “cordless phones,” which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety limits.
G
National Institute for Occupational Safety and Health
G
Environmental Protection Agency
G
Occupational Safety and Health Administration
G
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF exposure.
The FCC relies on the FDA and other health agencies for
safety questions about wireless phones.
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get
from these base stations are typically thousands of times
86 VX8100
4. What are the results of the research done already?
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of Radio Frequency (RF) energy exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under which
people use wireless phones, so we do not know with
certainty what the results of such studies mean for human
health. Three large epidemiology studies have been
published since December 2000. Between them, the
studies investigated any possible association between the
use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but ten or more
years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing
agent and the time tumors develop — if they do — may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
VX8100 87
Safety
6. What is the FDA doing to find out more about the
possible health effects of wireless phone RF?
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a detailed
agenda of research needs that has driven the
establishment of new research programs around the
world. The project has also helped develop a series of
public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
And Development Agreement (CRADA) to do research on
wireless phone safety. The FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts with
independent investigators. The initial research will include
both laboratory studies and studies of wireless phone
7. How can I find out how much Radio Frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with
Federal Communications Commission (FCC) guidelines that
limit Radio Frequency (RF) energy exposures. The FCC
established these guidelines in consultation with the FDA
and the other federal health and safety agencies. The FCC
limit for RF exposure from wireless phones is set at a
Specific Absorption Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure
limit takes into consideration the body’s ability to remove
heat from the tissues that absorb energy from the wireless
phone and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF
exposure level for each model of phone to the FCC. The
FCC website (http://www.fcc.gov/oet/rfsafety) gives
directions for locating the FCC identification number on
your phone so you can find your phone’s RF exposure level
in the online listing.
88 VX8100
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
9. What steps can I take to reduce my exposure to Radio
Frequency energy from my wireless phone?
The Institute of Electrical and Electronic Engineers (IEEE)
is developing a technical standard for measuring the Radio
Frequency (RF) energy exposure from wireless phones
and other wireless handsets with the participation and
leadership of FDA scientists and engineers. The standard,
“Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to
Wireless Communications Devices: Experimental
Techniques”, sets forth the first consistent test
methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The test
method uses a tissue-simulating model of the human head.
Standardized SAR test methodology is expected to greatly
improve the consistency of measurements made at
different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue,
either by the whole body or a small part of the body. It is
measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless
phone complies with safety guidelines.
If there is a risk from these products — and at this point we
do not know that there is — it is probably very small. But if
you are concerned about avoiding even potential risks, you
can take a few simple steps to minimize your exposure to
Radio Frequency (RF) energy. Since time is a key factor in
how much exposure a person receives, reducing the
amount of time spent using a wireless phone will reduce
RF exposure. If you must conduct extended conversations
by wireless phone every day, you could place more
distance between your body and the source of the RF,
since the exposure level drops off dramatically with
distance. For example, you could use a headset and carry
the wireless phone away from your body or use a wireless
phone connected to a remote antenna. Again, the
scientific data do not demonstrate that wireless phones
are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
VX8100 89
Safety
10. What about children using wireless phones?
11. What about wireless phone interference with
medical equipment?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to Radio
Frequency (RF) energy, the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Radio Frequency (RF) energy from wireless phones can
interact with some electronic devices. For this reason,
the FDA helped develop a detailed test method to
measure Electro Magnetic Interference (EMI) of
implanted cardiac pacemakers and defibrillators from
wireless telephones. This test method is now part of a
standard sponsored by the Association for the
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
Advancement of Medical Instrumentation (AAMI). The
final draft, a joint effort by the FDA, medical device
manufacturers, and many other groups, was completed
in late 2000. This standard will allow manufacturers to
ensure that cardiac pacemakers and defibrillators are
safe from wireless phone EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of Electrical
and Electronic Engineers (IEEE). This standard specifies
test methods and performance requirements for hearing
aids and wireless phones so that no interference occurs
when a person uses a “compatible” phone and a
“compatible” hearing aid at the same time. This standard
was approved by the IEEE in 2000.
precautionary; it was not based on scientific evidence
that any health hazard exists.
90 VX8100
The FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, the FDA
will conduct testing to assess the interference and work to
resolve the problem.
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
12. Where can I find additional information?
For additional information, please refer to the following
resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your
Federal Communications Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to memorize
the phone keypad so you can use the speed dial
function without taking your attention off the road.
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
2. When available, use a hands-free device. A number of
hands-free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
VX8100 91
Safety
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can reach it without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, if possible, let your voicemail
answer it for you.
or attempt to coincide your calls with times you may
be stopped at a stop sign, red light, or otherwise
stationary. But if you need to dial while driving, follow
this simple tip -- dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix; they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, and ice can be
hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or business
card, or writing a “to-do” list while driving a car, you
are not watching where you are going. It is common
sense. Do not get caught in a dangerous situation
because you are reading or writing and not paying
attention to the road or nearby vehicles.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous
situations -- with your phone at your side, help is only
three numbers away. Dial 911 or other local
emergency number in the case of fire, traffic accident,
road hazard, or medical emergency. Remember, it is a
free call on your wireless phone!
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
92 VX8100
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call 911 or other local emergency number,
as you would want others to do for you.
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the government's requirements
for exposure to radio waves. Your wireless phone is a
radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for
exposure to Radio Frequency (RF) energy set by the
Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all
persons, regardless of age and health.
10. Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you can still use your
wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured or a vehicle you know to be stolen,
call roadside assistance or other special non-
emergency wireless number.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg. Tests for SAR are conducted using standard
operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although SAR is determined at
For more information, please call to 888-901-SAFE, or visit
our website www.wow-com.com.
VX8100 93
Safety
the highest certified power level, the actual SAR level of
the phone while operating can be well below the
maximum value. Because the phone is designed to
operate at multiple power levels to use only the power
required to reach the network, in general, the closer you
are to a wireless base station antenna, the lower the
power output.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
BEJVX8100. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.wow-com.com.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model.
*
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
The highest SAR value for this model phone when tested
for use at the ear is 1.16 W/kg and when worn on the
body, as described in this user guide, is 0.936W/kg (body-
worn measurements differ among phone models,
depending upon available accessories and FCC
requirements). While there may be differences between
SAR levels of various phones and at various positions,
they all meet the government requirement for safe
exposure.
94 VX8100
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing loss.
If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket 01-309
modified the exception of wireless phones under the
Hearing Aid Compatibility Act of 1988 (HAC Act) to require
digital wireless phones be compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access
to telecommunications services for persons with hearing
disabilities.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.
While some wireless phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference they generate.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help
you find this rating. Higher ratings mean that the hearing
device is relatively immune to interference noise. The
hearing aid and wireless phone rating values are then
added together. A sum of 5 is considered acceptable for
normal use. A sum of 6 is considered for best use.
The wireless telephone industry has developed a rating
system for wireless phones, to assist hearing device
users find phones that may be compatible with their
hearing devices. Not all phones have been rated. Phones
that are rated have the rating on their box or a label
located on the box.
VX8100 95
Safety
For information about hearing aids and digital
wireless phones
FCC Hearing Aid Compatibility and Volume Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of
the two values equal M5. This should provide the hearing aid
user with “normal usage” while using their hearing aid with the
particular wireless phone. “Normal usage” in this context is
defined as a signal quality that is acceptable for normal
operation.
Self Help for Hard of Hearing People Inc. [SHHH]
www.hearingloss.org/hat/TipsWirelessPhone.htm
The Hearing Aid Compatibility FCC Order
http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC=03-
168A1.pdf
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules. The
HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
When you're talking over the cell phone, it's recommended
you'd turn the BT mode off for HAC.
96 VX8100
Accessories
There are a variety of accessories available for your
mobile phone. Consult your local dealer for availability.
Stereo Headset
The headset connects to your phone
allowing hands-free operation. It
includes earpiece and microphone.
Adapter
The Adapter allows you to charge the
battery while away from your home or
office. It supports standard U.S. AC120 Volt
60 Hz outlets.
NOTE The Phone operates in vibration/no sound mode on
Manner Mode/Silence All Mode even when
connected to a headset.
Battery
Two types of battery are available;
The standard battery and the extended
battery.
USB Cable
Connects your phone to your PC.
Cigarette Lighter Charger
The cigarette lighter charger allows you
to operate the phone and trickle charge
the phone’s battery from your vehicle. It
takes 3.5 hours to charge a completely
discharged standard battery.
Battery Pack Charger
The battery pack charger allows
you to charge the battery pack itself
without the phone. It can charge a
completely discharged standard
battery in 3.5 hours.
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in
your car, providing you with hands-free
operation. It can charge a completely
discharged battery in 5 hours.
Holster
VX8100 97
Warranty Information
(6) The customer shall bear the cost of shipping the product to
the Customer Service Department of LG. LG shall bear the
cost of shipping the product back to the consumer after the
completion of service under this limited warranty.
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be free
from defects in material and workmanship, according to
the following terms and conditions:
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) The limited warranty for the unit and enclosed accessories
shall be a period of one (1) year from the date of original
purchase. The remaining warranty period for the unit being
repaired or replaced shall be determined by presentation
of the original sales receipt for the purchase of the unit.
(1) Defects or damage resulting from use of the product in
other than its normal and customary manner.
(2) Defect or damage from abnormal use, abnormal
conditions, improper storage, exposure to moisture or
dampness, unauthorized modifications, unauthorized
connections, unauthorized repair, misuse, neglect, abuse,
accident, alteration, improper installation, or other acts
which are not the fault of LG, including damage caused by
shipping, blown fuses, or spills of food or liquid.
(2) The limited warranty extends only to the original purchaser
of the product and is not assignable or transferable to any
subsequent purchaser / end user.
(3) The limited warranty is good only to the original purchaser
of the product during the warranty period as long as it is in
the U.S., including Alaska, Hawaii, U.S. Territories, and all
Canadian Provinces.
(3) Breakage or damage to antennas unless caused directly
by defects in material or workmanship.
(4) Alleged defects or malfunctions of the product if the
Customer Service Department at LG was not notified by the
consumer during the applicable limited warranty period.
(4) The external housing and cosmetic parts shall be free of
major defects at the time of shipment and, therefore, shall
not be covered under these limited warranty terms.
(5) Products which have had the serial number removed or
made illegible.
(5) Upon request from LG, the consumer must provide
information satisfactory to LG to prove the date of
purchase or exchange.
98 VX8100
(6) This limited warranty is in lieu of all other warranties,
express or implied either in fact or by operations of law,
statutory or otherwise, including but not limited to any
implied warranty of marketability merchantability or fitness
for a particular use.
OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT
OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY OR MERCHANTABILITY APPLICABLE TO
THIS PRODUCT.
Some states do not allow the exclusion of limitation of
incidental or consequential damages or limitations on how
long an implied warranty lasts; so these limitations or
exclusions may not apply to you. This warranty gives you
specific legal rights and you may also have other rights,
which vary from state to state.
(7) Damage resulting from use of non-LG approved
accessories.
(8) All plastic surfaces and all other externally exposed parts
that are scratched or damaged due to normal customer
use.
(9) Products operated outside published maximum ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following
telephone number from anywhere in the continental
United States:
3. STATE LAW RIGHTS:
LG Electronics Service
201 James Record Road
Huntsville, AL 35824
No other express warranty is applicable to this product.
THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY
OR MERCHANTABILITY, IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. LGE MOBILECOMM
USA INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE
USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING
Tel. 1-800-793-8896
Email: http://us.lgservice.com
Please call or write for the location of the LGE authorized
service center nearest you and the procedures for
obtaining warranty claims.
VX8100 99
Index
10 Driver Safety Tips 91
123 (Numbers) Mode 18
Call Settings 74
Email 50
Get V CAST Music 32
Get V CAST Video 35
Groups 54
Call Sounds 63
Call Vibrate 63
Call Waiting 16
Caller ID 17
Card Memory 70
Change Code 73
Charging the Battery 13
Chat 50
Clock Format 76
Command Mode 62
Consumer Information on
SAR 93
Contact List 54
CONTACTS 53
Contents 4
Emergency #s 73
Erase Contacts 73
ERI Banner 66
ERI Sounds 64
Ez Tip Calc 61
A
Abc (Multi-tap) Mode 18
Accessories 97
Alarm Clock 60
Alert Sounds 64
All 58
Announce Alert 62
Answer Options 75
Auto NAM 69
Auto Retry 75
Auto Volume 76
I
Icon Glossary 69
Important Information 7
Important Safety
Precautions 1
Inbox 47
F
FCC Hearing-Aid
Compatibility (HAC)
Regulations for Wireless
Devices 95
FCC Part 15 Class B
Compliance 7
FCC RF Exposure
Information 9
FDA Consumer Update 85
Fonts 67
Installing the Battery 13
K
Keypad Volume 64
B
L
Back To Top 64
Backlight 66
Banner 66
Language 74
Location 72
Lock Mode 16
Lock Phone 72
D
Default Numbers 25
Deleting 26
Device Info 69
Dialed 57
Display 65
Display Themes 67
Drafts 49
Battery 13
G
Battery Charge Level 13
Best Match 62
Get Extras 43
Get Fun & Games 41
Get Going 43
GET IT NOW 30
Get New PIX 37
Get New Ringtones 32
Get News & Info 41
Get PIX & FLIX 35
Get Tunes & Tones 32
M
TM
Bluetooth 77
Manage Memory 69
Manage Music 34
Master Volume 63
Menu Access 30
Menus Overview 11, 12
MESSAGING 44
Minute Beep 64
C
Calculator 61
Calendar 59
Call Connect 64
Call Ringtone 63
E
Earpiece Volume 64
Editing Contacts Entries 24
100 VX8100
Missed 56
Mobile IM 50
Phone Memory 70
Phone Overview 10
Picture ID 77
PIX Place 39
Power 78
Speed Dials 55
Standalone Mode 68
Start Command 61
Status Light 67
SW Version 69
Symbols Mode 18
Sync Music 34
System 68
W
Wait (W) 27
MSG Erase 52
MSG Settings 51
Mute Function 16
My Bluetooth Info 79
My Bluetooth Name 79
My FLIX 38
Wallpaper 67
Warranty Information 98
World Clock 61
Power On/Off Anim. 67
Power On/Off Sound 65
My Music 33
My PIX 37
System Select 68
R
Received 57
My Ringtones 33
My Sounds 34
My Visibility 79
RECENT CALLS 56
Removing the Battery 13
Reset Default 74
Ringer ID 76
T
T9Word (T9) Mode 18
Take FLIX 40
Take PIX 39
N
Technical Details 7
Text Input 18
TIA Safety Information 80
Tools 59
Train Words 62
TTY Mode 75
Network 68
New Contact 53
New PIX MSG 46
New TXT MSG 45
Notepad 61
S
Safety Information 83
Save Options 70
Screen Icons 15
Security 72
Sent 48
O
Service Alerts 64
Serving System 69
Set NAM 69
V
One-Touch Dial 76
Vibrate Mode 16
View Timer 58
Voice Command 61
Voice Privacy 76
Voicemail 50
Volume Quick Adjustment
16
SETTINGS & TOOLS 59
Shortcut Key 61
Signal Strength 14
Sounds 63
P
Paired Devices 78
Pause (P) 27
PC Connection 77
Personal Banner 66
Speed Dialing 17
VX8100 101
|