SEL
PWR
REL
LOUD
4x40 WATTS
1
2
CDC/
TUNE
TRK
3
U
AS/PS
L
M
5
O
E
DISC
V
5
DISC
SEL
4
PCD-5
BAND
3 RAP-BT
4
6MEM
SCN
RPT
RDM
PGM
T/F
5
1
2
CLR
AUX
PCD-5R
AM/FM/MPX RADIO
WITH
FOLD-DOWN DETACHABLE FRONT PANEL,
5-DISC COMPACT DISC PLAYER
AND QUARTZ CLOCK
OWNER'S
MANUAL
Released: 10-15-01
Revision A: 4-20-02 --- Added Remote Control description and incorporated other minor changes
OPERATING INSTRUCTIONS
16,32 28,29
10,18,19
13,14,15
33
3,4,5,6,7,8
34 31
17
1
SEL
PWR
LOUD
REL
4x40 WATTS
11
30
1
2
CDC/
TUNE
TRK
3
U
AS/PS
L
M
5
O
E
DISC
V
5
DISC
SEL
4
PCD-5
BAND
3 RAP-BT
4
6MEM
SCN
RPT
RDM
PGM
T/F
5
1
2
CLR
AUX
2
9
27
20 21 22 23 25
12
26
24
Pressing the Select button once will set the unit for volume adjust-
ment (VOL will momentarily appear on the display panel, followed a
few seconds later by V -- and the setting number). Pressing the button
additional times will select bass adjustment (BAS on display panel),
treble adjustment (TRE), balance (BAL), fader (FAD), and volume (VOL)
again. The display will return to the normal indication 5 seconds
after the last adjustment or when another function is activated. Refer to
1
POWER (PWR) BUTTON
Press this button to turn the unit on and off. When the ignition switch is
on, the radio will turn on automatically when the CDC, BAND or AUX
button is pressed.
2
VOLUME CONTROL
To increase the volume level, rotate the VOLUME control in the clock-
wise direction. The volume will increase and the level will be shown
on the display panel from a minimum of V -0 to a maximum of V -46
To decrease the volume level, rotate the control in the counterclock-
wise direction. The display will automatically return to the normal indi-
cation 5 seconds after the last volume adjustment or when another
function is activated. This control is also used in conjunction with
the SEL/LOUD button to adjust the bass, treble, balance and fader
levels as described in 4, 5, 6 and 7.
paragraph
8
for the LOUD function of this button.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the
SEL/LOUD button until the BAS indication appears on the display panel.
Within 5 seconds of choosing the Bass mode, rotate the VOLUME
Control to adjust the bass response as desired. The bass level will be
shown on the display panel from a minimum of B -6 to a maximum
of B +6 (B 0 represents flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
3
SELECT (SEL)/LOUD BUTTON
This button is used to select the audio function (volume, bass, treble,
balance or fade) to be adjusted using the VOLUME control.
-3-
panel. Pressing the button again for 2 seconds will de-activate the
function and LOUD will disappear from the display.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing the
SEL/LOUD button until the TRE indication appears on the display
panel. Within 5 seconds of choosing the Treble mode, rotate
the VOLUME control to adjust the treble response as desired. The
treble level will be shown on the display panel from a minimum of
T -6 to a maximum of T +6 (T 0 represents flat response). The display
will automatically return to the normal indication 5 seconds after
the last adjustment or when another function is activated.
9
AM/FM BAND SELECTOR
During radio play, each time the button is pressed, the radio band
changes. The indications AMI, AMII, FMI, FMII, or FMIII will appear
on the display panel according to your selection.
During CD play, pressing this button will change to radio operation
without ejecting the disc.
6
LEFT/RIGHTBALANCECONTROL
bl
UP/DOWN TUNING (
During radio operation, each time the Up TUNE button (
pressed, the radio will tune two frequency steps higher. Similarly, each
press of the Down TUNE button ( ) will tune two frequency steps
/
)/CD TRACK (TRK)SELECTION
To adjust the left-right speaker balance, first select the Balance mode by
pressing the SEL/LOUD button until the BAL indication appears on the
display panel. Within 5 seconds of choosing the Balance mode, rotate
the VOLUME control clockwise to adjust it to the right channel speakers,
or counterclockwise to adjust it to the left channel speakers. The balance
position will be shown on the display panel from L 12 (full left) to R 12 (full
right). When the volume level between the left and right speakers is
equal, C 00 will be shown on the display panel. The display will auto-
matically return to the normal indication 5 seconds after the last ad-
justment or when another function is activated.
)
is
lower. Pressing either button for longer than 1 second and then releas-
ing will activate the automatic seek tuning function, whereby the radio
will seek the next station in the selected direction and stop and remain
at that frequency.
Pressing and holding either button for longer than 1 second will cause
the radio to continue tuning rapidly in the selected direction until
the next available station and momentarily stop there. Tuning will con-
tinue unless the button is released at the desired station.
7
FRONT/REARFADERCONTROL
To adjust the front-rear speaker balance, first select the Fader mode
by pressing the SEL/LOUD button until the FAD indication appears
on the display panel. Within 5 seconds of choosing the Fader mode,
rotate the VOLUME control clockwise or counterclockwise to adjust the
front-rear speaker levels as desired. The fader position will be shown
on the display panel from F 12 (full front) to R 12 (full rear). When the
volume level between the front and rear speakers is equal, C 00 will
appear on the display panel. The display will automatically return to the
normal indication 5 seconds after the last adjustment or when
another function is activated.
During CD player operation, these buttons are used to select a desired
tbramck on the disc. (Refer to Track Select.)
AUTO-STORE TUNING (AS)
PRE-SET SCAN TUNING (PS)
Press this button momentarily to scan the 6 stations in the pre-
set memories of the band in use. The unit will stop at each pre-set
station for 10 seconds before continuing to the next pre-set station (the
frequency on the display panel will flash during Pre-Set Scan opera-
tion). Press the button again momentarily to stop Pre-Set Scan opera-
tion and remain on the selected frequency.
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost the
bass and treble ranges to compensate for the characteristics of
human hearing. Press and hold the SEL/LOUD button for at least 2
seconds to activate this feature as indicated by LOUD on the display
Pressing the button for longer than 2 seconds will activate the Auto-Store
Tuning feature. The radio will automatically scan the band in use and enter
strong local stations into the pre-set memory positions for that band.
-4-
LOC will appear on the display as tuning occurs. If you have already
set the pre-set memories of that band to your favorite stations, activating
the Auto-Store Tuning feature will erase those stations and enter the
new stronger stations. This feature is most useful when traveling in a
new area where you are not familiar with the local stations.
NOTE: It is a characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may
take longer to illuminate than under normal conditions. In
addition, the visibility of the numbers on the LCD may
slightly decrease. The LCD readout will return to normal
when the temperature increases to a normal range.
bn
STATION PRE-SET MEMORIES
To manually set any of the 6 pre-set memory buttons, use the follow-
ing procedure:
bq
FUNCTION DISPLAY
The Function Display consists of a single bar graph which displays a
bar graph which provides a visual representation of the audio signal
power level. As the volume is increased, the number of illuminated
segments will increase.
1. Turn the unit on and select the desired band.
2. Select the first station to be pre-set using the TUNE/TRK
buttons.
3. Press and hold the pre-set button to be set for approximately
2 seconds.The pre-set number CH 1-6 will appear on the
display, indicating the station is now set into the memory position
of that pre-set button and can be recalled at any time by
momentarily pressing that button.
br
DISC SLOT
With the label surface facing up, gently insert each disc into the slot
until the soft-loading mechanism engages and draws the disc into the
player. The number of discs loaded will appear both on the front panel
display disc icon (flashing white segment) and on the DISC INF display on the
rear of the front panel. The discs will be loaded in order beginning with the
number (1-5) currently displayed. Disc play will begin when the CDC button is
pressed; and play will start with track 1 on the last disc loaded, unless another
disc is selected using the DISC SEL button on the front side of the
panel.
4. Repeat the above procedure for the remaining 5 pre-sets
on the band in use and for the other 4 bands of the unit.
bo
FM STEREO/MONO/LOCAL (LOC) INDICATIONS
The unit receives both stereo and monaural signals. During FM radio
operation, the unit is usually receiving a stereo signal as indicated by
the stereo icon (
comfortable listening, the stereo indication will appear intermittently or
) on the display. If a stereo signal is too weak for NOTE: This unit is designed for play of standard 5" (12cm) Compact
Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this
unit, either with or without an adapter, as damage to the
player and/or disc can occur. Such damage will not be
covered by the Warranty on this product.
not at all; if an AM or monaural signal is received, the
icon will
disappear from the display panel.
bp
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time,
and activated functions.
1
bs
CD PLAY/PAUSE SELECTOR (CDC/ II )
When listening to radio with a disc loaded in the unit (
2
3
on the
5
4
display panel), press this button to return to disc play mode from the
beginning of the last track in play.
-5-
During disc play, press this button to temporarily stop play of the disc
(PAUS will appear on the display panel). Press the button again to
resume play from the point at which it was stopped. Pause mode will
also be canceled by activating any other disc function.
cn
REPEAT A - B SELECTOR (RPT A-B)
The Repeat A - B function is used to select a section of the disc other
than a complete track to be repeated. Press the button at the begin-
ning of the section that you wish to have repeated (RPT and A will
appear on the display panel). Allow the disc to play to the end of the
section that you wish to have repeated and then press the button
again (the A on the display panel will change to a b). The selected
section will be played repeatedly until the function is canceled by press-
ing the RPT A-B button again or activating any other disc function.
bt
TRACK (TRK) SELECT (
The Track Select functions are used to quickly access the beginning
of a particular track. Each time the Forward Track Select ( ) button
/
)
is pressed, the next higher track number will be selected as shown
on the display panel. Similarly, each time the Backward Track Select
(
) button is pressed, the next lower track number will be selected
co
RANDOM PLAY SELECTOR (RDM)
During disc play, press this button to play the tracks on the disc in a
as shown on the display panel.
bu
CUE/REVIEW FUNCTIONS (
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue button
/
)
random shuffled order (RDM will appear on the display panel). In Ran-
dom Play mode, the Forward Track Select (
select tracks in the random order instead of the normal progression. Back-
ward Track Select ( ) will go back to the beginning of the track in play
) will also
(
(
) to advance rapidly in the forward direction or the Review button
) to advance rapidly in the backward direction. During either func-
if it has played longer than 5 seconds or to a random track if it has
played less than 5 seconds. The Random Play mode can be can-
celed by pressing the button again (RDM indication will disappear from
the display panel).
tion, the elapsed time within each track will automatically be shown on
the display panel.
cl
TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the first 10 seconds of each
track on the disc (SCN will appear on the display panel and the track
number will flash). When a desired track is reached, press the Track
Scan button again to cancel the function and play of the selected track
will continue. Track Scan mode will also be canceled by activating the
Repeat Play or Random Play functions.
cp
MEMORY/CLEARSELECTOR(MEM/CLR)
Up to 18 tracks can be programmed for play in any order you select.
The following procedure is used to program the order of track play:
1. Select a disc into the unit to begin disc play.
2. Select the first track to be programmed using the Track Select
buttons (TUNE/TRK) and press the MEMory Selector button. The
indication M - 01 will momentarily appear on the display panel,
indicating that the selected track has been entered as the first
one to be played in Programmed Play mode.
cm
TRACKREPEATPLAYSELECTOR(RPT)
During disc play, press this button to repeat the play of the selected
track (RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the RPT indi-
cation disappears from the display panel. Repeat Play mode will also
be canceled by activating the Track Scan or Random Play functions.
3. Select the second track to be programmed (this could be on
another disc) using the Track Select button and then press the
Memory Selector button. M -02 will appear on the display The
selected track has been entered as the second one to be played
in Programmed Play mode.
-6-
4. In similar manner, continue selecting other tracks (up to a
maximum of 18) to be played in programmed order. The
indication FULL will appear on the display panel if attempt
ing to program more than 18 selections.
cs
AUXILIARY (AUX) BUTTON
If a portable audio device, is connected to the Left and Right auxiliary
input jacks, this source can be selected for play through the radio by
pressing the AUX button. When the button is pressed, A --in appears
on the display panel. When the auxiliary input is being used, no other
audio input sources (radio or CD) are operational.
cq
PROGRAMMEDPLAYSELECTOR(PGM)
To play the tracks in the selected order after programming is com-
pleted, press the Programmed Play button so that the PGM indication
appears on the display panel. Play will begin on the first track
selected in the programmed order. During Programmed Play mode,
the Track Select functions will operate in the programmed order in-
stead of the normal progression. Track Scan and Track Repeat can
be selected during Programmed Play and will operate on the pro-
grammed tracks.
ct
PANEL DISC SELECT (DISC SEL) BUTTON
The back of the front panel contains a DISC SEL button which is used
in conjunction with the disc number LCD and Disc Eject ( ) button to
select a particular CD you wish to remove and/or replace. When the
DISC SEL button is pressed, the disc number display to the left se-
quences through discs 1-5; stop at the number disc you wish to eject
and press the eject button. The selected disc will be ejected.
To de-activate Programmed Play and return to play of all tracks on the
disc in normal order, press the Programmed Play button again so that
the PGM disappears from the display panel. Activating the Cue/Review
functions or the Random Play mode will also cancel Programmed Play
mode.
Clearing Programmed Play Memory: To clear the Programmed Play
memory, press the Memory Clear button at any time during Programmed
Play mode (PGM on display panel). PGM will disappear from the dis-
play panel, M --- CL will appear momentarily, and the program will be
erased. The Programmed Play memory will also be cleared auto-
matically when the disc(s) is ejected.
cu
DISC EJECT (
)
Disc play is stopped; the disc currently selected for play is ejected and
the unit will change to radio operation by pressing this button (EJT will
briefly appear on the display panel). When the disc is ejected, no cd ap-
pears on the display; press BAND to return to radio operation. The disc must
be removed from the unit or be reloaded. Pressing the Disc Eject button
for at least 2 seconds will eject all discs from the unit in sequence,
beginning with the disc currently in play.
dl
TIME/FREQUENCY DISPLAY SELECTOR (T/F)
Press this button to call the time display on the incorporated quartz
clock. Press the button again to return to radio frequency or disc dis-
play, or it will return automatically after 5 seconds.
NOTE: Program Play memory will be maintained if the disc is left in
the player when the unit is shut off.
dm
THEFT-DETERRENT LED
A light-emitting diode (LED) with lens is mounted on the front of the
When this button is pressed during disc play, the next CD in order is chassis behind the panel mounting plate; the LED will flash at 1-sec-
cr
DISC SELECT (DISC SEL) BUTTON
selected for play. The selected DISC segment number (1-5) is high-
ond intervals when the panel folds down, and will flash at 2-second
intervals when the panel is removed from the radio. The flashing light
serves as both a visual reminder that the panel has been released, or
as a warning to a would-be thief that the unit has been disabled by
removal of the front panel.
1
2
3
lighted on the front panel disc icon (
) and flashes while play
5
4
is active. Otherwise, the segment number lights steadily during radio
operation if the disc(s) is still installed.
-7-
dn
RESET BUTTON
dp
INFRARED SIGNAL SENSOR
This sensor detects the signal transmitted by the PCD-5 Remote Con-
trol unit. Make sure the Remote Control is pointed directly at this sen-
sor window area on the front panel when accessing radio and CD
functions.
A RESET button is accessible on the rear of the front panel when it is in the
fold-down position. The reset circuitry is provided to protect the mi-
croprocessor circuitry and should only be activated under the fol-
lowing circumstances.
NOTES ON USE OF FRONT PANEL
1. Upon initial installation after all wiring is completed.
1. Make sure the front panel is right-side up when attaching it to the
chassis as it cannot be attached when up-side down.
2. Do not press very hard on the front panel when attaching it to
the chassis. No more than light to moderate pressure
should be needed.
3. When attaching the front panel, make sure the right side is
correctly engaged before pressing the left side to lock it into
position.
4. When taking the front panel with you, please use the supplied
carrying case to protect the panel from dirt and damage.
2. If there is a malfunction of any of the switches on the unit or of the
CD player, pressing the RESET button may clear the system and
return the unit to normal operation.
CAUTION: Pressing the RESET button will cause all discs to be ejected.
When the RESET button is pressed be certain that the front panel is in
the down position.
do
FRONT PANEL RELEASE (REL) BUTTON
This button is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button; the
panel will fold down to the horizontal position. At the center of the panel,
press the release clip to disengage the panel from the mounting plate,
and pull the panel straight out until it clears the mounting plate guides.
To re-attach the panel, position the panel so both sides engage the
mounting plate guides; then slide the panel home until the mecha-
nism locks it into place in the mounting plate.
PANEL MOUNTING
PLATE
DISC SLOT
THEFT DETERRENT
LED
MOUNTING PLATE
GUIDE (2 PLACES)
DISC SELECT
(DISC SEL)
BUTTON
PANEL RELEASE
CLIP (PRESS TO
REMOVE PANEL
FROM MOUNTING
PLATE)
CD EJECT
(
) BUTTON
RESET BUTT
FRONT PANEL
CT
DISPLAY
(32)
-8-
SETTING THE CLOCK
1. Switch the vehicle ignition on and the radio on (radio frequency or disc track number will be shown on the display
panel).
2. Press and hold the Time/Frequency (T/F) button approximately 2 seconds until the time display appears with AM or
PM and the colon ( : ) flashing. Release the T/F button.
3. Press the Down Tuning button (
the minutes to the correct time.
) to adjust the hours and the AM/PM indication, and the Up Tuning button (
) to adjust
4. When the correct time is shown on the display panel, wait 5 seconds for the display to return to the normal indication.
CD PLAYER ERROR CODES
If a problem should develop while operating the CD player, the following error codes may be displayed on the display panel:
INF-1: Indicates mechanical malfunction. Press the Reset button dn.
INF-2: Indicates mechanical malfunction. Press the Reset button dn.
INF-3: Indicates mechanical malfunction. Press the Reset button dn.
INF-4: Indicates disc focus error. Press the Reset button dn.
INF-5: Indicates disc focus error. Press the Reset button dn.
INF-6: Indicates mechanical malfunction. Press the Reset button dn.
INF-7: Indicates data error. Press the Reset button dn.
INF-8: Indicates disc reading error. Eject the disc, make sure it is clean, undamaged, and loaded correctly (label side up). Re-
load the disc and check for proper operation or try another disc.
INF-9: Indicates disc lever error. Press eject button.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
-9-
SPECIFICATIONS
REMOTE CONTROL UNIT
1. BAND Button: Same function as radio BAND selector 9.
2. POWER Button: Same function as radio PWR 1.
Size:
7" W x 2" H x 6-1/4" D
3. VOL
/
Buttons: Same function as radio VOLUME +/- 2.
178 mm x 50 mm x 160 mm
4. IR Transmitter: Emits IR function signal to radio sensor dp.
5. SEL/LOUD Button: Same function as radio SEL/LOUD 3.
6. PLAY/PAUSE ( ll ) Button: Same function as radio CDC/ ll bs.
7. TUNE/TRK (« / ») Buttons: Same function as radio bl.
8. AUX Button: Same function as radio cs.
Operating Voltage:
Output Power:
12 volts DC, negative ground
160 watts maximum
(40 watts x 4 channels)
Output Wiring:
Floating-ground type designed for
4 speaker use. Front and rear channels
CANNOT be combined (bridged) for use
with 2 speakers.
9. RPT A-B Button: Same function as radio cn.
10. PGM Button: Same function as radio cq.
11. MEM CLR Button: Same function as radio cp.
RCA low-level outputs (rear channels).
12. MUTE Button: When this button is pressed during radio or CD
operation, MUTE appears on the display, audio is muted, and
all other radio or CD play functions, except for the audio level
display, disappear. When pressed again, MUTE disappears
from the display and normal radio or CD audio is restored.
13. CLK Button: Same function as
Output Impedance:
Low-Level Output:
Tuning Range:
Compatible with 4-8 ohm speakers.
2.0 Volts (2000 mv)
AM: 530-1,720 kHz. (10 kHz step)
FM: 87.5-107.9 MHz. (200 kHz step)
Sensitivity:
AM:20uV.
FM:3.0uV.
radio Time/Frequency button dl.
2
3
4
5
14. AS/PS ELPS Button: Same function
as radio AS/PS button bm.
15. RDM Button: Same function as
radio co.
6
1
FM Stereo Separation:
CD Frequency Response:
CD Signal/Noise Ratio:
CD Channel Separation:
CD Distortion:
30 dB
19
20-20,000 Hz. ±1 dB
70 dB
7
8
18
17
16. Station Presets 1-6: Same function
as radio bn.
60 dB
9
10
17. SCN Button: Same function
as radio cl.
0.10%
16
18. RPT Button: Same function
as radio cm.
11
15
14
12
*Specifications are subject to change without notice.
19. DISC SEL Button: Same function
as radio cr.
13
-10-
CAREANDMAINTENANCE
The radio section of your new sound system does not require any maintenance. We recommend you keep this manual for reference
on the many features found in this unit as well as how to set the clock.
The compact disc player section also requires no routine maintenance, but proper understanding of its use and handling will help you obtain
maximum enjoyment of its capabilities. The following points should be observed:
l When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit.
l The CD player is a precision instrument and will not operate properly in extreme hot or cold. In case of such conditions, wait until the
interior temperature of the vehicle reaches a normal temperature before using the player.
l If the temperature inside the player gets too hot, a protective circuit will automatically stop play of the disc. In this case, allow the unit
to cool off before operating the player again.
l Never insert anything other than a 5" (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects.
l Do not attempt to use 3" (8 cm) CD-Single discs in this unit, either with or without an adaptor, as damage to the player and/or disc may
occur. Such damage will not be covered by the Warranty on this product.
l When not using the disc player, always remove the compact disc.
l When the vehicle warms up during cold weather or under damp conditions, moisture may condense on the lens of the disc player. Should
this occur, the player will not operate properly until the moisture has evaporated.
l The unit is designed with a vibration dampening CD mechanism to minimize interruption of disc play due to normal vibration in a moving
vehicle. When driving on very rough roads, however, occasional sound skips may occur. This will not scratch or damage the disc and
normal play will resume when the rough conditions cease.
HANDLINGCOMPACTDISCS
Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of sound quality. Please follow these guidelines
to take care of your compact discs:
l Use only compact discs with the mark:
l Fingerprints, dust, and dirt should be carefully wiped off the disc’s playing surface (shiny side) with a soft cloth. Wipe in a straight motion
from the inside to the outside of the disc.
l Never use chemicals such as record sprays, household cleaners or thinner to clean compact discs. Such chemicals can irreparably
damage the disc’s surface.
l Discs should be kept in their storage cases when not in use.
l Do not expose discs to direct sunlight, high temperatures or high humidity for extended periods.
l Do not stick paper, tape, or labels on the disc surfaces nor write on them with any type of marker.
CD-RPLAYBACKCAPABILITY
This model can play most CD-R media that contains audio programs.
Playback of CD-R depends on the conditions of the recording equipment and the CD-R disc quality. In some cases, a CD-R disc
cannot be played on this unit.
-11-
12 / 24 MONTH LIMITED WARRANTY
Applies to automotive radios, radio/tape players, radio/CD players, CD
changers, power amplifiers, equalizers and accessories.
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,
under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated
bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below.
The warranty period will be extended to 24 months from the date of original purchase if the product is installed by an authorized Prestige Audio
dealer. To claim warranty service during this extended period, the bill of sale must specify that the product was installed by an authorized
Prestige Audio dealer.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THEEXTENTOFTHECOMPANY'SLIABILITYUNDERTHISWARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENTPROVIDED
ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHTWITHINAPERIODOF30
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
128-5543
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-6159A
-12-
|