5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730
5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853
5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414
5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979
5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259
5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557
5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001
5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236
5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385
5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687
5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761
5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858
5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024
5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532
5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254
5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097
5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318
5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052
5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985
5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786
5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471
5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427
5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823
5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157
5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816
5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862
D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882
D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812
5,917,837 5,920,284 D411,823 5,923,650 5,923,705 5,926,143
5,926,470 5,926,500 5,926,786 5,930,230 5,930,692
Other patents pending.
Kyocera is a registered trademark of Kyocera Corporation. QUALCOMM is a
registered trademark of QUALCOMM Incorporated. Brick Attack is a trademark
of Kyocera Wireless Corp. All other trademarks are the property of their
respective owners.
Copyright © 2002 Kyocera Wireless Corp. All rights reserved. Printed in the
United States of America.
82-K5233-1EN, Rev. 001
FCC/IC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC radiation exposure requirements, use of this device for
body-worn operational configurations is limited to accessories tested and
approved by Kyocera Wireless Corp. Other accessories used with this device
for body-worn operations must not contain any metallic components and
must provide at least 22.5 mm separation distance including the antenna and
the user’s body. Other accessories that have not been tested for body-worn
SAR may not comply with FCC radiation exposure limits and should be
avoided.
This model phone meets the government’s requirements for exposure to radio
waves.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to
radiofrequency (RF) energy set by the Federal Communications Commission
of the U.S. Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard
operating positions specified by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the body) as required
by the FCC for each model. The highest SAR value for this model phone when
tested for use at the ear is 1.40 W/kg and when worn on the body, as
described in this user guide, is 0.657 W/kg. (Body-worn measurements differ
among phone models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government
requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on file with the FCC and
can be found under the Display Grant section
http://www.fcc.gov/oet/fccid after searching on FCC ID OVFKWC-2235.
Additional information on SAR can be found on the Cellular
Telecommunications and Internet Association (CTIA) web-site at:
ÜííéWLLïïïKïçïJÅçãKÅçã.
* In the United States and Canada, the SAR limit for mobile phones used by
the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
Caution
The user is cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void the warranty and user’s
authority to operate the equipment.
Warning
Use only Kyocera approved accessories with Kyocera phones. Use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
Optimize your phone’s performance
Use the guidelines on page 3 to learn how to optimize the performance and
life of your phone, antenna, and battery.
Air bags
If you have an air bag, DO NOT place installed or portable phone equipment
or other objects over the air bag or in the air bag deployment area. If
equipment is not properly installed, you and your passengers risk serious
injury.
Potentially unsafe areas
mçëíÉÇ=Ñ~ÅáäáíáÉëÓTurn your phone off in any facility when posted notices
require you to do so.
^áêÅê~ÑíÓFCC regulations prohibit using your phone on a plane that is in the air.
Turn your phone off before boarding aircraft.
sÉÜáÅäÉëÓRF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer of the
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to help you obtain this information.
_ä~ëíáåÖ=~êÉ~ëÓTurn off your phone where blasting is in progress. Observe
restrictions, and follow any regulations or rules.
mçíÉåíá~ääó=ÉñéäçëáîÉ=~íãçëéÜÉêÉëÓTurn off your phone when you are in any
area with a potentially explosive atmosphere. Obey all signs and instructions.
Sparks in such areas could cause an explosion or fire, resulting in bodily injury
or death.
Areas with a potentially explosive atmosphere are often, but not always,
clearly marked. They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or chemicals
• vehicles using liquefied petroleum gas, such as propane or butane
• areas where the air contains chemicals or particles such as grain, dust, or
metal powders
• any other area where you would normally be advised to turn off your
vehicle engine
Use with care
Use only in normal position (to ear). Don’t bend the antenna or touch it
unnecessarily. Pull out the antenna when on a call and push it in when the
phone is not in use. Avoid dropping, hitting, bending, or sitting on the phone.
Keep phone dry
If the phone gets wet, turn the power off immediately and return it to the
dealer for service.
Resetting the phone
If the screen seems frozen and the keypad does not respond to keypresses,
reset the phone by completing the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for service.
Qualified service
If you are experiencing problems with your phone, see “Getting Help” on
page 86. If you have additional questions, contact your service provider for
technical support. If the problem persists, return the phone with all
accessories and packaging to the dealer for qualified service.
Accessories
Use only Kyocera-approved accessories with Kyocera phones. Use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
To shop online for a Hands-free Car Kit and other phone accessories, visit
ïïïKâóçÅÉê~JïáêÉäÉëëKÅçãLëíçêÉ. To order by phone, call (800) 349-4188
(U.S.A. only) or (858) 882-1410.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on, it receives
and sends out RF energy. Your service provider’s network controls the power
of the RF signal. This power level can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission (FCC) adopted
RF exposure guidelines with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety standards previously set by
both U.S. and international standards bodies in the following reports:
ANSI C95.1 (American National Standards Institute, 1992)
NCRP Report 86 (National Council on Radiation Protection and Measurements,
1986)
ICNIRP (International Commission on Non-Ionizing Radiation Protection,
1996)
Your phone complies with the standards set by these reports and the FCC
guidelines.
093 453 037
hóçÅÉê~=táêÉäÉëë=`çêé.
10300 Campus Point Drive, San Diego, CA 92121 U.S.A.
Visit us at ïïïKâóçÅÉê~JïáêÉäÉëëKÅçã
To purchase accessories, visit ïïïKâóçÅÉê~JïáêÉäÉëëKÅçãLëíçêÉ
Table of Contents
1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Charging the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Caring for the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Getting to know your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Understanding screen icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Performing basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
2 Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Dealing with missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
User Guide for the Kyocera 1135 Phone
xv
Viewing recent call details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Setting up speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Finding a phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Silencing an incoming call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Locking the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Ensuring call privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Calling emergency numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
3 Storing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Saving a new contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Editing a contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Finding contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Entering letters, numbers, and symbols . . . . . . . . . . . . . . . . . . . . .38
xvi
Table of Contents
4 Sending and Receiving Text Messages. . . . . . . . . . . . . . . . . . 45
Sending a new text message . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Retrieving a text message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Erasing text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
5 Customizing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting vibrate mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Choosing a different ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Personalizing the home screen . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Changing the look and feel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Choosing a different language . . . . . . . . . . . . . . . . . . . . . . . . . . .74
User Guide for the Kyocera 1135 Phone
xvii
Creating a secure environment . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Setting message alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
6 Using Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
7 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
xviii
Table of Contents
1 GETTING STARTED
This document describes the Kyocera 1135 trimode phone, with CDMA
digital service at 800 MHz and 1900 MHz, and analog service at 800 MHz.
Your phone comes with an internal/removable lithium ion (LiIon) battery.
Installing the battery
1. Hold the phone face down.
2. Place the battery in the phone casing, with the
metal contacts facing down and towards the
bottom of the phone.
3. Align the battery door to the grooves on the
bottom of the phone.
4. Push the battery door on while pressing down
firmly, ensuring that the battery door clicks into
place. Repeat if the battery door is not aligned.
Do not force.
User Guide for the Kyocera 1135 Phone
1
5. Fully charge the battery before using the phone.
Charging the battery
The battery is partially charged when you receive your phone. You must
have at least a partial chargein the battery to make or receive calls,
regardless of whether or not the AC adapter is connected to the phone.
To charge the battery, connect the AC adapter
to the proper jack on the bottom of the phone
(as shown), then connect the adapter’s plug to
a wall outlet.
The battery icon in the upper-right corner of
the screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
2
Getting Started
Recharging the battery
You can safely recharge the battery at any time, even if it has a partial
charge.
Caring for the battery
This page describes important safety information and tips for improving
battery performance.
General safety guidelines
• Do not take apart, puncture, or short-circuit the battery.
• If you have not used the battery for more than a month, recharge it before
using your phone.
• Avoid exposing the battery to extreme temperatures, direct sunlight, or
high humidity.
• Never dispose of any battery in or near a fire. It could explode.
User Guide for the Kyocera 1135 Phone
3
Common causes of battery drain
The following functions drain the battery more quickly and adversely affect
talk and standby times:
• You are often playing games.
• Backlighting is frequently on. (To adjust backlighting, page 71.)
• The phone is frequently used in analog mode. If you do not see a on
the home screen, the phone is in analog mode. To set your phone to
• operate in different modes, select Menu →Settings → Network →
Digital or Analog and choose from the options available.
• You are far away from a base station or cell site when in digital mode.
• Data cables or accessories, such as the Hands-free headset, are connected
to the phone.
• No service is available, or service is available intermittently. The phone
requires more power to acquire service than to maintain consistent
service.
4Getting
Started
• The earpiece and ringer volume settings are high. To adjust volume,
page 65.
• Review how often voicemail notifications, pages, and text messages are
received, and how quickly they are acknowledged. To use power most
efficiently, acknowledge notifications and messages immediately.
User Guide for the Kyocera 1135 Phone
5
Getting to know your phone
Jack for Hands-free Headset (sold
1
separately) only.
2
Home screen. Press
(item 3) to
select Menu.
OK key selects a menu item or option.
3
4
5
Send/Talk key starts or answers a call.
Use the keypad to enter numbers, letters,
or symbols.
*Text key changes the text mode in text
entry.
6
7
Fully extend the antenna to make or
answer a call. Push in the antenna
completely when the phone is not in use.
Clear key erases the last character in text
8
entry, or returns to the previous menu.
6
Getting Started
End/Power key turns on and turns off the
phone, ends a call, or returns to the home
screen.
9
Navigation key (all directions) scrolls
through lists and positions the cursor. Also
accesses shortcuts from the home screen:
(left) locks the keypad; (right) turns off
ringers; (down) lists contacts; (up) defines
and accesses a personal shortcut
(page 67).
10
Space# key enters a space during text
entry.
11
12
Jacks for AC adapter (included) and data
cable (sold separately).
Warning: Inserting an accessory into the
incorrect jack will damage the phone.
User Guide for the Kyocera 1135 Phone
7
Understanding screen icons
The following icons may appear on your phone screen:
The phone is operating in CDMA digital mode. If does not
appear, the phone is operating in analog mode.
The phone is receiving a signal. You can make and receive calls.
Fewer bars indicate a weaker signal.
The phone is not receiving a signal. You cannot make or receive
calls.
A call is in progress.
The alarm clock is set.
The phone vibrates or lights up instead of ringing.
The phone is roaming outside of its home service area.
8
Getting Started
You have a text message, voicemail, or page. ( indicates an
urgent text message, voicemail, or page.)
The battery is fully charged. The more black bars, the greater the
charge.
Enhanced CDMA voice privacy is on, if available from your service
provider, or you are in a secure web browser session.
Press
up.
Press
Press
down.
to go back or clear an item.
Enter text using normal alpha text entry.
Capitalize the next letter when entering text.
User Guide for the Kyocera 1135 Phone
9
Capitalize every letter when entering text.
Capitalize the first letter of each word when entering text, or the
first letter of each sentence in a text message.
Enter symbols.
Enter numbers.
10
Getting Started
Performing basic functions
To...
From the home screen...
Press and wait until the phone beeps.
Turn the phone
on
Turn the phone
off
Press and hold
until you see “Powering Off.”
Make a call
End a call
Extend the antenna, enter the number, then press
.
Press
Press
.
Answer a call
.
Set up / access
voicemail
Press and hold
and follow the system prompts.
Verify your
phone number
Select Menu → Phone Info.
User Guide for the Kyocera 1135 Phone
11
To...
From the home screen...
Press , then to answer.
Silence the
ringer
Lock the
keypad
Press and hold
left.
Access a
contacts list
Press
down.
Set vibrate
mode
Press and hold
right.
Define your
own shortcut
Press
up.
12
Getting Started
Using menus
The contents of the main menu are as follows
Recent Calls
Contacts Messages
Settings
Silence All
Keyguard
Sounds
Tools & Games
Alarm Clock
(Lists 15 recent
calls)
View All
Voicemail
Send New
Add New
Tip Calculator
Calculator
Find Name Text InBox
Speed Dial
List
Text OutBox
Filed
Display
Countdown
Security
Stopwatch
Phone Info
Business
List
TM
Erase Msgs
Msg Settings
Call Information Brick Attack
(Displays your
phone number
for reference)
Network
Extras
Personal
List
Messaging
Accessories
Information
User Guide for the Kyocera 1135 Phone
13
To use menus:
• Press
to select Menu.
• Press
• Press
left or right to see menus.
to select a menu or menu item.
• Press
• Press
up or down to view menu items.
to go up a menu level.
• Press
to return to the home screen.
• These instructions assume your menu appears in icons. To change your
menu so that it appears as a list, page 69.
• In this guide, the use of an arrow → tells you to select an option from a
menu. For example, Menu → Settings means select Menu, then select
Settings.
14Getting
Started
2 MAKING AND ANSWERING CALLS
Making a call
1. Make sure you are in an area where the signal can be received. Look for
the @ symbol on the home screen.
Note: The more bars you see in this symbol, the clearer the reception will
be. If there are no bars, try to move to where the reception is better. In
some cases, this can be as simple as changing the direction you’re facing.
2. Fully extend the antenna.
3. Enter the phone number.
4. Press
.
Note: If your phone cannot locate a signal, it changes to power-save
mode. If you see the message “Power Save Mode” and a
on the
screen, press any key to return to normal operating mode and try your
call again.
User Guide for the Kyocera 1135 Phone
15
5. Press
to end the call.
Redialing a number
To redial the last number called, press
twice.
Answering a call
When a call comes in, the phone rings, vibrates or lights up, and a dancing
phone icon appears. The number of the caller also appears if not restricted.
If the number is stored in your contacts directory, the contact name
appears.
• To answer the call, press
• If you do not wish to answer the call, select either Silence or Ignore and
press
– Silence mutes the ringer.
.
.
16
Making and Answering Calls
– Ignore mutes the ringer and returns to
the screen that was active when the call came in.
• If you wish to change the ringer, see page 63.
Answering calls Hands-Free
If your phone is attached to a Hands-free Car Kit (sold separately), you can
set it to answer an incoming call after five seconds.
• Select Menu → Settings → Accessories → Auto-Answer →
After 5 seconds.
Dealing with missed calls
When you have missed a call, a “Missed” message appears on your screen.
This message remains, unless the caller leaves a voicemail.
• To clear the screen, press
or
.
• To view the caller’s number or name, select Calls. In the Recent Calls list,
the missed call is indicated with a flashing .
User Guide for the Kyocera 1135 Phone
17
• If the caller left a voicemail message, Voice appears on the screen. Press
to dial your voicemail number. If you have not yet set up your
voicemail, the caller cannot leave a message. For help setting up
voicemail, see page 24.
Setting missed call alerts
You can set an alert to beep every five minutes after you have missed a call.
• Select Menu → Settings → Sounds → Missed Call Alert → Enabled.
• To turn off the alert, press
or
.
• To cancel the alert option, select Menu → Settings → Sounds →
Missed Call Alert → Disabled.
18
Making and Answering Calls
Viewing recent call details
Information about the last 15 calls you made or received are stored in the
Recent Calls list. You can get details on the caller’s name and phone
number, along with the time and length of the call. Icons indicate the types
of calls in the list.
Call to
Call from
Three-way call
Forwarded call
Missed call (flashing)
User Guide for the Kyocera 1135 Phone
19
To view call details:
1. Select Menu → Recent Calls.
2. Select a recent call item.
3. Select an option:
– Time—Shows the time of the call.
– Number—Shows the caller’s number (for an incoming call), or the
number you called (for an outgoing call).
– Save New—Allows you save the number in your Contacts directory.
– Add to—Allows you to add the number to an existing contact card.
– View Contact—Shows details on the contact if the caller’s
information is already in your Contacts directory.
Note: If the number has been saved as “secret,” you must enter a four-digit
lock code to view or edit the number. For information on the lock code, see
page 74. For details about making a phone number secret, turn to page 32.
20
Making and Answering Calls
Erasing calls from the list
To erase all calls from the Recent Calls list, refer to page 77.
Setting up speed dialing
Speed dialing allows you to quickly dial a stored phone number by entering
a one- or two-digit speed dialing location.
1. Open a saved contact.
2. Highlight the phone number and press
.
3. Select Speed Dialing.
4. Select a speed dialing location. (Location “1” is reserved for your
voicemail number.)
5. Press
to select Assign.
User Guide for the Kyocera 1135 Phone
21
To speed dial
From the home screen, enter the one- or two-digit speed dialing location
and press
.
Setting up 1-Touch Dialing
1-Touch Dialing is a form of speed dialing that allows you to press and hold
a speed dial location to make a call. It is the fastest way to speed dial.
1. Select Menu → Settings → Extras → 1-Touch Dialing → Enabled.
2. Press
.
Using 1-Touch Dialing
To dial a phone number, simply press and hold the assigned speed dialing
location for the phone number. If it is a two-digit number, press the first
number, then press and hold the second.
22
Making and Answering Calls
Removing a speed dialing location
1. From the home screen, select Menu → Contacts → Speed Dial List.
2. Select a speed dialing location.
3. Highlight the phone number and press
4. Select Speed Dialing.
.
5. Select the number to remove.
6. Press
right to highlight Remove.
7. Press
.
User Guide for the Kyocera 1135 Phone
23
Finding a phone number
If you have already saved a phone number, you can find it quickly by
pressing
down. This brings up a list of frequent contacts, followed by
a complete list of all saved contacts. Scroll down the list, find the one you
want, and press to dial the number. For more information on finding
contact information, refer to page 35.
Setting up voicemail
Before your phone can record voicemail messages, you must set up a
password and record a personal greeting. When you have set up your
voicemail, all unanswered calls to your phone are automatically transferred
to voicemail, even if your phone is in use or turned off.
1. From the home screen, press and hold
.
2. Follow the system prompts to create a password and record a greeting.
Note: If you are having trouble accessing your voicemail, contact your
service provider.
24Making
and
Checking voicemail messages
When a voice message is received, your screen will display text similar to:
“New Message 1 Voicemail.” This text will remain for about five minutes.
After that, look for the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
If you see “New Message” on your screen
1. Press
to select Voice. This initiates a call to your voicemail number.
2. Follow the prompts to retrieve the message. For specific information on
getting voicemail messages, contact your service provider.
If you see the
symbol
to call your voicemail number.
1. Press and hold
2. Follow the prompts to retrieve the message. For more information about
getting voicemail messages, contact your service provider.
User Guide for the Kyocera 1135 Phone
25
Silencing an incoming call
If you need to silence an incoming call quickly, press
, then press
to answer the call. This action silences the current call only. The next call
will ring as normal.
Adjusting the volume during a call
To adjust the earpiece volume manually during a call, press
down.
up or
Note: To set the phone to automatically adjust the earpiece volume based
on the amount of noise around you or the other person’s voice volume level,
see “Setting automatic volume adjustment” on page 65.
Locking the keypad
Your phone has a keyguard function that locks your keypad to protect your
phone against accidental keypresses when the phone is turned on and a call
is not in progress. With keyguard enabled, you can still answer or silence an
incoming call.
26
Making and Answering Calls
• To lock the keypad from the home screen, press
left and hold.
in this order.
• To unlock the keypad, press
→
→
Changing the keyguard setting
1. Select Menu → Settings → Keyguard.
2. Highlight an option. You can set the phone to lock the keypad
immediately, or after 30 seconds, 1 minute, or 5 minutes (if no key is
pressed in this time).
3. Press
to save.
Keeping track of your calls
Your phone has two timers that count the amount of calls you have made
and received.
User Guide for the Kyocera 1135 Phone
27
All Calls
This timer displays the total number and duration of all calls you have made
and received. You cannot reset this timer.
• Select Menu → Settings → Call Information → All Calls Timer.
Recent Calls
This timer displays the total number and duration of recent calls you have
made and received since the last time you reset the timer.
1. Select Menu → Settings → Call Information → Recent Calls Timer.
2. Press
to select Reset. This resets the timer to zero.
Timing your calls
If you wish to know how long you are spending on a call, you can set up
your phone to beep
10 seconds before each minute.
• Select Menu → Settings → Sounds → Minute Alert → Enabled.
28
Making and Answering Calls
Ensuring call privacy
You can set your phone to sound an alert if enhanced CDMA voice privacy is
on (check with your service provider to see if CDMA voice privacy is enabled
in your area). When voice privacy is activated during a call, you will see a
message and a on your screen.
• Select Menu → Settings → Network → Privacy Alert → Enabled.
Calling emergency numbers
You can place calls to 911 even if your phone is locked or your account is
restricted.
User Guide for the Kyocera 1135 Phone
29
Making and receiving calls after dialing 911
Any time you make a 911 call, your phone goes into Emergency mode. This
enables the emergency service exclusive access to your phone so they can
call you back if necessary. In order to make or receive regular calls after
dialing 911, you must first exit this mode.
• When you have completed the 911 call, press
press again to confirm your choice. The phone returns you to the
home screen and you are ready to make and receive calls.
to select Exit. Then
30
Making and Answering Calls
3 STORING CONTACTS
Use your phone’s Contacts directory like a set of phone index cards to store
information about a person or company.Your phone can hold, on average,
about 200 phone numbers.
Saving a new contact
1. From the home screen, enter the phone number you want to save.
2. Press
to select Save New.
3. Enter a name for the contact. If you need to know how to enter letters,
see page 38.
4. Press
to select Save.
-or-
Press
right, then press
to select Options. Press
up or
down to select an option from the list:
User Guide for the Kyocera 1135 Phone
31
– Save—Save information and return to the home screen.
– Number Type—Select work, home, mobile, pager, or fax.
– Speed Dialing—Select a speed dialing location from the list.
– Secret—Select Yes to lock the phone number. If a phone number is
locked, you must enter your four-digit lock code (see page 74) to
view or edit the number.
– Primary Number—Classify this number as the primary number for
the contact.
– Classify Contact—Classify the contact as business or personal.
(Tip—See page 63 for information about assigning business or
personal ringers.)
5. Press
Saved!”
to select Save. A message appears: “Contact Successfully
32
Storing Contacts
Adding a code or extension
When you save the phone number of an automated service, you may
include a pause where you would select an option or enter a password. You
can enter multiple pauses in a phone number.
1. Enter the first portion of the phone number.
2. Press
screen.
right to scroll through the options at the bottom of the
to select a type of pause.
3. Press
A timed pause causes the phone to stop
dialing for two seconds.
A hard pause causes the phone to stop
dialing until you select Release.
4. Enter the remaining numbers.
User Guide for the Kyocera 1135 Phone
33
Editing a contact
1. Select Menu → Contacts.
2. To find the contact you want to edit, select either View All or Find Name.
3. Press
to select the contact to edit.
4. Select Options to edit the entire contact, or select the specific
information (such as the phone number) you want to edit.
5. Enter the new information.
6. If finished, press
to select Save.
Erasing information from a contact
1. Select Menu → Contacts → View All.
2. Press
to select a card.
3. Select Options → Erase Contact to erase the entire contact.
-or-
34Storing
Contacts
Select the phone number, then select Erase Number to erase the phone
number.
4. Select Yes to erase.
Finding contact information
There are three main methods for finding a phone number or contact
details: checking the Frequent Contacts list, searching the Contacts
directory, and using Fast Find.
Checking the Frequent Contacts list
From the home screen, press
down to see up to 15 of the most
frequently called contacts, in order from most frequent to least frequent.
You also see the full Contacts List if you scroll down past the double line.
Tip: You can enter the first letter of the name you are looking for to skip
down the list.
User Guide for the Kyocera 1135 Phone
35
Searching the Contacts directory
1. Select Menu → Contacts.
2. Select a search method:
– To view a list of names, select View All.
– To find a specific name, select Find Name, then enter part of the
name and select Find.
3. Scroll down until you find the name you want.
– To call the contact, select the number and press
.
– To display the full contact, press
.
Setting up Fast Find
With Fast Find, you press one or two keys to view close matches of the
number you are looking for.
1. From the home screen, select Menu → Settings → Extras → Fast Find.
2. Select Enabled.
36
Storing Contacts
Using Fast Find
1. Press the keys corresponding to the letters of the name you want to find.
The matching contacts appear on the screen.
Note: Speed dial locations appear before names if they use the same
keys. For example, to look for Abe’s contact entry, you press
for “A”.
However, imagine there is a speed dial location associated with 2, the
speed dial contact appears first. To find Abe’s number, you would then
press the key that corresponds to the next letter of his name.
2. When you see the name you want, you can press
or press to view contact details.
to call the number,
3. If you do not see the name you want, press
up or down to search
the possibilities.
User Guide for the Kyocera 1135 Phone
37
Entering letters, numbers, and symbols
Use this table for general instructions for entering letters, numbers, and
symbols in a contact card. For more detailed information on using text entry
modes, see page 40.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 40.
Enter a number
Enter a symbol
Use
mode and press a key once to enter its number.
For more options, see page 40.
Press
until you find the symbol you want. There are
more symbols under the symbol text mode. See page 43.
Enter a space
Press
Press
.
.
Erase a character
38
Storing Contacts
Erase all
characters
Press and hold
.
Move the cursor
right or left
Press
Press
up or down.
Change text
entry modes
.
Capitalize the
next letter
Select
Select
mode. Press and hold
mode. Press and hold
. Choose
. Choose
.
.
Capitalize every
letter
Capitalize the
first letter of
each word
Select
Press
mode. Press and hold
left or right.
. Choose
.
Highlight an
option at the
bottom of the
screen
User Guide for the Kyocera 1135 Phone
39
Understanding text entry modes
There are three modes:
Enter Name:
Number mode
Normal Text
Symbol mode
ꢀ+
Save
O...
Current mode
Note: The mode you start in depends on the task you are doing. If you are
entering a phone number, you start in number mode. If you are entering a
name for a contact, you start in normal text mode.
40
Storing Contacts
Entering numbers
• In
mode, press a number key once.
• In
mode, press and hold a number key until the number appears on
the screen.
Entering words letter by letter
1. Press a key once for the first letter, twice for the second letter, and so on.
2. Wait for the cursor to move right and enter the next letter.
User Guide for the Kyocera 1135 Phone
41
Note: When your phone is set to Spanish, additional accented characters
become available:
Spanish
A Á B C 2
D E É F 3
G H I Í 4
M N Ñ O Ó 6
T U Ü Ú V 8
42
Storing Contacts
Entering symbols
While entering text, you can enter symbols by pressing
the symbol you want.
until you see
The following symbols are available:
. & @ , - ‘ : ; ? / “ ( ) _
To access a full set of symbols:
1. Press
right to highlight the current text mode and press
to
enter the menu.
2. Select
Symbols.
3. Press
down to view the list of symbols.
4. Press the number key corresponding to the symbol you want.
User Guide for the Kyocera 1135 Phone
43
Changing text entry modes
In order to enter characters belonging to another text entry mode, you need
to change modes. For example, to enter numbers in an email address while
in
Normal Text mode, you change to
Number mode, enter the
number, and then change back to
mode to complete the address.
To change text entry modes, you can either:
• Press
-or-
until the mode you want appears.
• Press
right to highlight the current text entry mode, press
to
enter the menu, then select a different mode.
44
Storing Contacts
4 SENDING AND RECEIVING TEXT
MESSAGES
This chapter describes how to send, receive, and erase text messages from
your phone. For information on voicemail messages, see page 25.
Important: The features and menus described in this chapter may vary
depending on services available in your area. In addition, usage charges
may apply to each message. For clarification on these issues, check with
your service provider.
Sending a new text message
You can only send text messages to phones that are capable of receiving
them, or to email addresses.
1. Select Menu → Messages → Send New.
2. Enter the phone number or email address of the person to whom you are
sending the message, or select Contacts to choose a saved phone
number or email address.
User Guide for the Kyocera 1135 Phone
45
Note: If you wish to enter an email address, you need to switch text
entry modes. To enter letters, press
symbols, press until you find the symbol you want. See page 40 for
more information on text entry modes.
to switch to
mode. To enter
3. Press
to select Next.
4. You now have the option of writing your own message or sending a pre-
written message.
– To send a pre-written message, see page 48.
– For help entering text, see page 40.
46
Sending and Receiving Text Messages
6. Choose one of the following options:
– Send Message—Send the message immediately. A copy is saved to
your Text OutBox.
– Callback Number—Include a callback number with the message. See
page 49.
– Delivery Receipt—Request notification when the message has been
received.
– Priority—Label the message as “Urgent.”
– Send Later—Schedule to send the message later. For help, see
page 51.
– Save Message—Save the message in your Filed folder.
– Exit—Cancel the message without saving.
User Guide for the Kyocera 1135 Phone
47
Receiving incoming calls while creating messages
• If you answer the call, you can continue working on the message when
you are finished with the call by selecting Menu → Messages →
Text OutBox and opening the message.
• If you don’t wish to answer the call, select Ignore. The call is silenced and
you return to the screen you were working in.
Sending a message to several recipients
If you are sending a message to more than one person, enter a space or a
comma between each phone number or email address. If you are sending to
more than one contact in your Contacts directory, the phone automatically
inserts a comma after each contact. The messages are sent one at a time,
once to each addressee. You can send a message to up to 10 contacts at
once.
Sending a pre-written message
Your Kyocera 1135 phone comes with a set of commonly used messages,
such as “Call me,” “Need directions,” or “I’m delayed.”
48
Sending and Receiving Text Messages
1. Select Menu → Messages → Send New and enter the recipient’s phone
number or email address and select Next.
2. Press
right and select AutoMsg.
3. Press
up or down to scroll through the list of message options.
to select a message. If you wish, enter additional text.
4. Press
5. Press
left and select Next.
Including a callback number
A callback number lets the recipient of a message know to what number
they can call you back. After creating a message, you can include your own
phone number or a specify another number.
Including your own phone number
1. Create the message, and choose Callback Number from the message
Options screen. (For help creating the message, see page 45).
User Guide for the Kyocera 1135 Phone
49
2. Press
to select Yes.
3. Press
up and select Send Message.
The message is sent and a copy is saved to your Text OutBox.
Including a specified phone number
1. Create the message, and choose Callback Number kSa*en.Me*M tcMe
Dmnrao e /SMMoge,haSe.Mfme/SMtnrocen.Me*M tcMGe MMemtcM V
2. Press
right and select Other.
3. Enter the phone number.
4. Press
to select Done. To change the text entry mode, see page 44.
up and select Send Message.
5. Press
The message is sent and a copy is saved to your Text OutBox.
50
Sending and Receiving Text Messages
Adding an emoticon
Your Kyocera 1135 phone has a special set of emotion icons, or “emoticons,”
that you can add to a text message. These emoticons are like a
sophisticated set of “smiley faces.” If the recipient’s phone supports the
same technology as your phone, they appear as you see them. If they are
not supported, the icons appear more simplistic.
To add an emoticon to a message:
1. From the message entry screen, place the cursor where you would like to
enter the emoticon.
2. Press
right and select Emotion.
3. Press
up or down to move through the list of available icons.
4. Press the key corresponding to the emoticon you wish to use. The
emoticon is placed in the message.
User Guide for the Kyocera 1135 Phone
51
Sending a message at a scheduled time
If you do not wish to send the message immediately, you can schedule to
send it later.
1. Create the message, and choose Send Later from the message Options
screen. (See “Sending a new text message” on page 45.).
2. Select a time when you wish the message to be sent (the options are:
30 minutes, 1 hour, 2 hours, 12 hours, 1 day, 2 days, and 3 days).
The message is scheduled for delivery and stored in your Text OutBox.
3. When you return to the Options screen, press
up and select Send
Message.
The message is sent from your phone immediately, but then held by your
service provider’s network for the specified period of time before it is
sent.
52
Sending and Receiving Text Messages
Sending a previously saved message
1. Select Menu → Messages → Filed.
2. Press
select one.
up or down through the list of messages and press
to
3. Press
to select Send To.
4. Enter the phone number or email address of the person to whom you are
sending the message, or select Contact to select a phone number or
email address from a contact.
5. Press
to select Next.
If you cannot send messages
You may not be able to send or receive messages if your phone’s memory is
nearly full, or if service is not available at that time. To free up memory,
erase old messages.
User Guide for the Kyocera 1135 Phone
53
Viewing the Text OutBox
1. Select Menu → Messages → Text OutBox.
2. Press
up or down through the list of messages. One of the
following symbols appears next to each message:
The message is pending and will be sent when possible. You can
cancel delivery of the message.
#
ꢀ
ꢁ
ꢂ
The message is scheduled to be sent at a scheduled time. You
cannot cancel delivery of the message.
The message cannot be sent because service is not available. An
alert appears on your phone if the message cannot be sent.
The scheduled message has been sent and will be delivered as
scheduled. You cannot cancel delivery of the message.
The message has been received by the recipient you have specified.
ꢃ
ꢄ
The message has never been sent, or has not been sent since it was
last modified. You can cancel delivery of the message.
54Sending
and
3. Press
to accept the message text.
– For help including a callback number, see page 49.
– For help scheduling an amount of time to wait before sending the
message, see page 52.
– For help requesting delivery notification or labeling the message as
urgent, see page 45.
4. When you are ready, select Send Message.
A copy is saved to your Text OutBox.
Retrieving a text message
When a text message is received, it is sent to your Text Inbox and you are
alerted by:
• A note: “New Message: 1 Text”
• A symbol: , which flashes if the message is urgent
User Guide for the Kyocera 1135 Phone
55
If you see the New Message note
You can choose to:
• View the message—Press
.
• Ignore the message—Press
right and select Ignore.
• Clear the screen—Press
.
If you see the
=symbol
1. Select Menu → Messages → Text InBox.
A list of all your received messages appears.
New, unread messages appear in bold. indicates an “Urgent”
message.
2. Press
up or down to scroll through the list of messages.
to read a message.
3. Press
56
Sending and Receiving Text Messages
4. If the message is long, press
down to view the entire message.
5. When you are finished, select an option from the bottom of the screen:
– Reply to the sender.
– Erase the current message.
– Save the message to your Filed folder.
– Sender allows you to view the sender’s information. You can select
an option to save it to the Contacts directory.
– Forward the message.
– Done returns you to the Text InBox.
6. Press
to see information such as callback number, email address, or
URL. (If a callback number is included with the message, press
again to call the number.)
User Guide for the Kyocera 1135 Phone
57
Erasing text messages
You have the option of erasing messages as you read them, erasing them
one-at-a-time from the list in the Text InBox, or erasing them all at once. It
is a good idea to erase old messages, as you have limited memory on your
phone.
Erasing single messages
1. Select Menu → Messages.
2. Press
down and press
to select the type of message you want
to erase (Text InBox, Text OutBox, or Filed).
3. Press
to select the message to erase.
4. Select Erase to erase the message. A notification appears: “Erase this
message?”
5. Select Yes to erase the message.
Note: You can erase a scheduled message from the Text OutBox, but you
cannot cancel delivery of the message.
58
Sending and Receiving Text Messages
Erasing all messages at once
1. Select Menu → Messages → Erase Msgs.
2. Press
up or down and press
to select an option:
– No—Cancel the erase request.
– Entire InBox—Erase all messages in your Text InBox.
– Old InBox—Erase all read messages in your Text InBox.
– Entire OutBox—Erase all messages in your Text OutBox.
– Filed—Erase all messages in the Filed folder.
3. A message appears: “Erase ALL?” Select Yes to erase messages or No to
cancel.
User Guide for the Kyocera 1135 Phone
59
Having messages automatically erased (Auto-Erase Text)
Use this setting to have old messages automatically erased when memory is
low.
1. Select Menu → Settings →ꢀMessaging → Auto-Erase Text.
2. Press
to select Old InBox.
60
Sending and Receiving Text Messages
5CUSTOMIZING YOUR PHONE
Setting vibrate mode
This procedure describes how to set your phone to vibrate for incoming
calls.
1. Select Menu → Settings → Sounds → Call/Ring Vibe.
2. Choose an option:
– Vibrate only—Causes the phone to vibrate for the duration of the
incoming call alert.
– Vibrate then ring—Causes the phone to vibrate for the first
10 seconds and then ring for the remainder of the incoming call alert.
3. Press
to return to the home screen.
Note: The phone will ring when attached to an external power source (such
as a charger), even if vibrate mode has been activated.
User Guide for the Kyocera 1135 Phone
61
Silencing all sounds
There is a quick and easy way to silence all sounds for incoming calls, alerts,
and menu navigation.
• From the home screen, press
right and hold. Notice that a
appears on the screen, indicating the phone has silenced all sounds. Next
time a call comes in, the phone will vibrate and light up.
• To turn sounds back on press
right and hold again.
Note: The phone will ring when attached to an external power source (such
as a charger), even if the silence settings have been activated.
Specifying just vibration or just lights
1. Select Menu → Settings → Silence All.
2. Select either Yes, vibe only or Yes, lights only.
3. Press
to save your selection.
62
Customizing Your Phone
Choosing a different ringer
Your Kyocera 1135 phone has several ringers you can choose from for your
incoming calls.
1. Select Menu → Settings → Sounds → Ringer Type.
2. Scroll down the list to hear the different rings.
3. Press
to select a ringer from the list.
Specifying ringers for different calls
You can set up your phone to ring differently depending on the type of call
you get.
1. If you have not already done so, save the contact in your Contacts
directory and specify it as business or personal. For help, see page 31.
2. Select Menu → Settings → Sounds → Business Call Ring or Personal
Call Ring.
3. Select a ringer from the list.
User Guide for the Kyocera 1135 Phone
63
Personalizing the home screen
Changing your banner
The banner is the personal label for your phone. It appears on the home
screen above the time and date. The banner can be up to 14 characters
long.
1. Select Menu → Settings → Display → My Banner.
2. Select Edit.
3. Press
to clear the screen.
4. Enter your new text.(For help, see “Entering letters, numbers, and
symbols” on page 38.)
5. Press
to save.
Choosing a different time/date format
1. Select Menu → Settings → Display → Time/Date Format.
2. Highlight the option you want.
64Customizing
Your
Adjusting volume
Adjusting the earpiece volume
To adjust the earpiece volume manually during a call, press
down to find a comfortable level.
up or
Setting automatic volume adjustment
You can set your phone to automatically adjust the earpiece volume during
a call, based on the surrounding noise level.
1. Place a call from a quiet environment and set the volume to a comfortable
level.
2. When you are finished with the call, select Menu → Settings →
Sounds → Smart Sound.
3. Select Enabled. The volume you have just set is now used as a baseline.
You can still manually adjust the volume during a call.
4. Press
to save the setting.
User Guide for the Kyocera 1135 Phone
65
Adjusting the ringer volume
1. Select Menu → Settings → Sounds → Ringer Volume.
2. Press
right to increase the volume, or left to decrease the volume.
Changing the key beep
The key beep is the sound made when you press the keys on the keypad.
You can change the sound (tones or clicks), length (normal or long), and
volume of the key beep.
To change the various elements of the key beep:
• Select Menu → Settings → Sounds and choose either Key Beep
Volume, Key Beep Length, or Key Beep Sound.
66
Customizing Your Phone
Using shortcuts
From the home screen, you can access four shortcuts by pressing the
navigation key in any one of four directions:
Define a shortcut.
ꢅ
Up
Press and hold to
set the phone to
vibrate.
Press and hold to
lock/unlock the
keypad.
Right ꢆ
ꢀLeft
Down
ꢇ
Access your saved contacts.
Three shortcut keys are automatically programmed into your phone (left,
right, and down). For the fourth (up), you can assign a shortcut to one of
User Guide for the Kyocera 1135 Phone
67
the various features of your phone. See “Creating a feature shortcut,”
below.
Creating a feature shortcut
1. Select Menu → Settings → Display → Shortcut Key.
2. Highlight the feature you want set as a shortcut, and press
to select
it.
– Choose any of the following: InBox, Ringer Volume, Recent Calls,
Business List, Personal List, Stopwatch, or Calculator, and their
respective menu/feature appears.
– Choose Send New Msg to send a new text message.
– Choose None to disable the shortcut.
Accessing a feature shortcut
From the home screen, press
up and follow the prompts.
68
Customizing Your Phone
Re-assigning a feature shortcut
To change the shortcut you have assigned:
1. Select Menu → Settings → Display → Shortcut Key.
2. Highlight a new feature and press
.
Changing the look and feel
Choosing a different menu view
You can change the appearance of the menus you see when you select
Menu from the home screen.
User Guide for the Kyocera 1135 Phone
69
To change the menu view:
• Select Menu → Settings → Display → Main Menu View, then the option
you want:
Small Icons
Large Icons
List Menus
Main Menu
/ꢀContacts
ꢀ
ꢁ Messages
%ꢀRecent Calls
Contacts
Contacts
(Note: If you change to List Menus, you will need to press
down to see menus.)
up or
70
Customizing Your Phone
Adjusting the backlighting
Your screen lights up while you are in a call or when you press a key on the
keypad. However, you can change when and how backlighting lights up.
1. Select Menu → Settings → Display → Backlighting.
2. Select an option from the list:
– Disabled—Turns backlighting off completely.
– 10 seconds—Turns backlighting on for 10 seconds after your last
keypress.
– 30 seconds—Turns backlighting on for 30 seconds after your last
keypress.
– 10 sec. & in call—Turns backlighting on during a call, and for
10 seconds after your last keypress.
– 30 sec. & in call—Turns backlighting on during a call, and for
30 seconds after your last keypress.
User Guide for the Kyocera 1135 Phone
71
Note: Keeping backlighting on during a call drains the battery more quickly
and reduces talk and standby times.
Setting Power Backlighting
You can set backlighting to remain on when an external power source, such
as the AC adapter, is used with the phone.
Note: Power backlighting may not be available with some accessories.
Check with your service provider.
1. Select Menu → Settings → Accessories →ꢀPower Backlighting.
2. Select Always on to keep backlighting on. (The battery charges more
slowly when power backlighting is on.)
Changing the display contrast
1. Select Menu → Settings → Display → Display Contrast.
2. Select the level of contrast you want (Highest, High, Medium, Low, and
Lowest).
72
Customizing Your Phone
Setting numbers to auto-hyphenate
Auto-hyphenation automatically inserts hyphens into your phone numbers
to be consistent with the U.S. dialing plan. For example, 1-222-333-4444.
1. Select Menu → Settings → Display → Auto-Hyphenation.
2. Select Enabled to turn this feature on.
Setting a screen saver
Several screen savers are provided with your phone. A screen saver works
only from the home screen, and activates 10 seconds after the last
keypress. Incoming calls and alerts override screen savers.
1. Select Menu → Settings → Display → Screen Saver.
2. Select a screen saver.
3. Press
to return to the home screen and wait 10 seconds to view the
screen saver you chose.
User Guide for the Kyocera 1135 Phone
73
Choosing a different language
Your phone supports English and Spanish.
1. Select Menu → Settings → Display → Language.
2. Select the language and press
.
Note: For information about entering special characters in Spanish, refer to
“Entering words letter by letter” on page 41.
Creating a secure environment
This section describes all the features involved in securing your phone and
preventing access to personal information. All security features are shielded
by a four-digit lock code.
Changing your lock code
The lock code is typically 0000 or the last 4 digits of your phone number.
1. Select Menu → Settings → Security.
74Customizing
Your
2. Enter your 4-digit lock code and select Change Lock Code. A message
appears: “Change Lock Code?”
3. Select Yes and enter a new 4-digit code, then press
. Enter your new
lock code again.
Locking your phone
When your phone is locked, you can only call your service provider number
or a number your service provider has set up as an emergency number
(e.g. 911). You can still receive incoming calls.
1. Select Menu → Settings → Security → Lock Phone Use.
2. Select an option:
– Never—Does not lock the phone.
– On power up—Locks the phone every time you turn it on.
– Now—Locks the phone immediately.
3. Press
.
User Guide for the Kyocera 1135 Phone
75
Unlocking the phone
1. From the home screen, select Unlock.
2. Enter your four-digit lock code.
Restricting calls
You can restrict the calls that can be made from your phone to only those
that have been saved in your Contacts Directory.
1. Select Menu → Settings → Security → Limit Calls Out.
2. Select Yes, to Contacts.
Clearing personal information
To clear personal information from your phone, you can erase all contacts
from the Contacts directory, and/or erase the Recent Calls list.
Erasing all contacts
1. Select Menu → Settings → Security → Erase All Contacts.
76
Customizing Your Phone
2. Select Yes to erase all contacts. A message appears: “Erase ALL
contacts?”
3. Select Yes to erase all contacts.
Erasing the recent calls list
1. Select Menu → Settings → Security → Erase Calls List.
2. Select Yes to erase all recent calls.
3. A message appears: “Erase Calls?”
4. Select Yes to erase all recent calls.
Setting message alerts
You can choose how you want be alerted of incoming voicemail, pages, or
text messages.
1. Select Menu → Settings → Messaging → the type of alert (Message,
Page, or Voicemail).
User Guide for the Kyocera 1135 Phone
77
2. Press
to select an option:
– Disabled—Does not alert you when a message is received.
– Vibrate once—Sets the phone to vibrate once when a new message
is received.
– Vibe & remind—Sets the phone to vibrate once when a new
message is first received, and once every five minutes. To stop the
reminder, press
to select Ignore.
– Soft beep once—Sets the phone to beep once softly when a
message is received.
– Soft beeps—Sets the phone to beep softly approximately every five
minutes. To stop this reminder, press
to select Ignore.
– Loud beep once—Sets the phone to beep once loudly when a
message is received.
– Loud beeps—Sets the phone to beep loudly approximately every five
minutes. To stop this reminder, press
to select Ignore.
78
Customizing Your Phone
Setting alerts for your headset
When a headset (sold separately) is attached to the phone, you can set
alert sounds to originate from the headset.
1. Select Menu → Settings → Accessories →ꢀHeadset Ringing.
2. Select Out of headset to have alerts originate from the headset.
User Guide for the Kyocera 1135 Phone
79
7 GETTING HELP
Customer Support
Your service provider’s customer support department may be accessible
directly from your phone when you dial a number such as *611 (check with
your service provider). They can answer questions about your phone, phone
bill, call coverage area, and specific features available to you, such as call
forwarding or voicemail.
For questions about the phone features, refer to the materials provided with
your phone, or visit www.kyocera-wireless.com.
For additional questions, you may contact the Kyocera Wireless Corp.
Customer Care Center in any of the following ways:
• Web site: www.kyocera-wireless.com
• Phone: (800) 349-4478 (U.S.A. and Canada only) or (858) 882-1401.
86
Getting Help
Before requesting support, please try to reproduce and isolate the problem.
When you contact the Customer Care Center, be ready to provide the
following information:
• The name of your service provider.
• The actual error message or problem you are experiencing.
• The steps you took to reproduce the problem.
• The phone’s electronic serial number (ESN).
To find the ESN:
a. Remove the battery.
b. Locate the white label on the back of the phone. Your phone’s 11-digit
ESN begins with “D” and is located under the bar code on the label.
Phone Accessories
To shop for phone accessories, visit www.kyocera-wireless.com/store, or
call (800) 349-4188 (U.S.A. only) or (858) 882-1410.
User Guide for the Kyocera 1135 Phone
87
Become a product evaluator
To participate in the testing and evaluation of Kyocera Wireless Corp.
products, including cellular or PCS phones, visit
beta.kyocera-wireless.com.
88
Getting Help
charging, 2
icon, 2
installing, 1
Index
Numerics
safety guidelines, 3
Brick Attack, 84
1-Touch dialing, 22
A
C
Alarm Clock, 8, 80
alerts
Calculator, 82
callback number
including in messages, 49
CDMA, enhanced voice privacy, 9
contacts
for headsets, 79
for messages, 77
for missed calls, 18
for voice privacy, 29
all calls timer, 28
Auto-Answer, 17
auto-hyphenation, 73
business, 32
calling, 36
classifying, 32
editing, 34
erasing, 34
B
backlighting, 71
banner, 64
battery
finding, 35
personal, 32
Contacts directory, 31
User Guide for the Kyocera 1135 Phone
89
Countdown Timer, 83
H
hard pause, 33
D
delivery receipt
for text messages, 47
digital mode, 8
display contrast, 72
I
icons, 8
K
keyguard, 27
keypad locking, 26
E
emoticons, 51
enhanced CDMA voice privacy, 9
erasing
L
language, 74
limiting calls out, 76
lock code, 74
locking
all contacts, 76
messages, 58
recent calls list, 77
single contact entries, 34
keypad, 26
phone, 75
F
M
Fast Find, 36
frequent contacts, 24, 35
menu view, 69
messages
90
Index
erasing, 58
pre-written, 48
retrieving, 55
priority of messages, 47
privacy
enhanced CDMA, 9
troubleshooting, 53
missed call alerts, 18
R
recent calls timer, 28
redialing a number, 16
resetting the phone, x
ringers
N
normal text mode, 40
number mode, 40
number type, 32
choosing types, 63
for different calls, 63
silencing, 11
P
pauses in phone numbers, 33
phone book
volume, 66
roaming, 8
ëÉÉ Contacts directory
phone number
type of, 32
verifying your own, 11
phone unlocking, 75
power backlighting, 72
power save mode, 15
S
screen icons, 8
screen savers, 73
secret contacts, 20, 32
security, 74
shortcuts
User Guide for the Kyocera 1135 Phone
91
accessing, 67
creating, 68
U
unlocking the phone, 76
Smart Sound, 65
sounds, 74
speed dialing, 22
Stopwatch, 84
symbol mode, 43
V
vibrate mode, 62
voice privacy, enhanced CDMA, 9
voicemail
accessing, 25
setting up, 11, 24
volume
T
Text InBox, 56
text modes
adjusting during a call, 26
automatic adjustment, 65
earpiece, 65
key beep, 66
ringer, 66
Smart Sound, 65
changing, 44
understanding, 40
Text OutBox, 54
time/date format, 64
timed pause, 33
timers
all calls, 28
recent calls, 28
Tip Calculator, 81
92
Index
|