JVC KD SC800R User Manual

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

KD-SC800R/KD-S901R

KD-SC800R

KD-S901R

COMPACT

DIGITAL AUDIO

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Pour l’installation et les raccordements, se référer au manuel séparé.

Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de

desbetreffende handleiding.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

GET0146-001A

[E/EX]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

How to use the M (MODE) button .............

SOUND ADJUSTMENTS ................... 20

Selecting preset sound modes

(C-EQ: custom equalizer) ....................... 20

Adjusting the sound .................................. 21

LOCATION OF THE BUTTONS ............

Control panel.............................................

OTHER MAIN FUNCTIONS ................ 22

Changing the general settings (PSM) ....... 22

Selecting the display color

BASIC OPERATIONS .......................

Turning on the power ................................

Setting the clock........................................

(only for KD-SC800R)............................. 24

Changing the standard plate

(only for KD-SC800R)............................. 24

Detaching the control panel ...................... 26

RADIO OPERATIONS ......................

Listening to the radio.................................

Storing stations in memory .......................

Tuning in to a preset station ......................

USING THE REMOTE CONTROLLER ..... 27

Location of the buttons.............................. 28

RDS OPERATIONS ......................... 10

What you can do with RDS ....................... 10

Other convenient RDS functions and

TROUBLESHOOTING ...................... 29

adjustments ............................................ 14

MAINTENANCE ............................. 30

Handling discs........................................... 30

CD OPERATIONS ........................... 17

Playing a CD ............................................. 17

Locating a track or a particular portion

SPECIFICATIONS ........................... 31

on a CD .................................................. 18

Selecting CD playback modes .................. 19

Prohibiting CD ejection ............................. 19

How to use the M (MODE) button

If you press M (MODE), the unit goes into functions mode, then the number buttons and 5/∞ buttons

work as different function buttons.

Ex.: When number button 2 works as MO (monaural) button.

Time countdown indicator

To use these buttons for original functions again after pressing M (MODE), wait for 5 seconds

without pressing any of these buttons until the functions mode is cleared.

• Pressing M (MODE) again also clears the functions mode.

LOCATION OF THE BUTTONS

Control panel

Display window

1 Remote sensor

2 Control dial

i RND (random) button

o Number buttons

; T (TP/PTY: traffic programme/programme

type) button

a CD button

s ∞ (down) button

–10 button

(standby/on/attenuator) button

4 SEL (select) button

5 Screws—M2 × 5 mm (only for KD-SC800R)

6 Plate cover and standard plate

(only for KD-SC800R)

7 FM/AM button

8 5 (up) button

+10 button

9 0 (eject) button

Display window

d LOUD (loudness) indicator

f EQ (equalizer) indicator

g CD–in indicator

h CD indicator

j FM band indicators (FM1, FM2, FM3)

k AM band indicator

l Tuner reception indicators

MO (monaural), ST (stereo)

/ RDS indicators

p 4

/¢

buttons

(control panel release) button

w DISP (display) button

• Also functions as SSM buttons when pressed

together with M (MODE) button.

e M (MODE) button

• Also functions as SSM buttons when pressed

together with DISP (display) button.

r Display window

t EQ (equalizer) button

y MO (monaural) button

u RPT (repeat) button

AF, REG, TP, PTY

RND (disc random) indicator

x Volume (or audio) level indicator

c Main display

v RPT (repeat) indicator

BASIC OPERATIONS

1 3

Turning on the power

4 Adjust the sound as you want. (See

pages 20 and 21.)

1 Turn on the power.

To drop the volume in a moment

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial, you can also restore

the sound.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

2 Select the source.

To turn off the power

Press and hold

second.

for more than one

“SEE YOU” appears, then the unit turns off.

• If you turn off the power while listening to a

CD, CD play will start from where playback has

been stopped previously, next time you turn on

the power.

To operate the tuner (FM or AM),

see pages 7 – 16.

To play a CD,

see pages 17 – 19.

CAUTION on Volume Setting:

3 Adjust the volume.

CDs produce very little noise compared with other

sources. If the volume level is adjusted for the

tuner, for example, the speakers may be damaged

by the sudden increase in the output level.

Therefore, lower the volume before playing a CD

and adjust it as required during playback.

To increase the volume

To decrease the volume

Volume (or audio) level indicator

(see page 22)

Only for KD-SC800R

This receiver is equipped with the steering

wheel remote control function.

If your car is equipped with the steering wheel

remote controller, you can operate this

receiver using the controller.

• See the Installation/Connection Manual

(separate volume) for connection to utilize

this function.

Volume level appears.

Setting the clock

4 Set the clock system.

1 Select “24H/12H.”

2 Select “24H” or “12H.”

You can also set the clock system to either

24 hours or 12 hours.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 23.)

5 Finish the setting.

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

2 Adjust the hour.

To check the current clock time or change the

display mode

Press DISP (display) repeatedly.

Each time you press the button,

the display mode changes as

follows:

• During tuner operation:

Frequency

Clock

3 Set the minute.

1 Select “CLOCK M” (minute).

Note:

2 Adjust the minute.

For the indication change during RDS operation,

see page 15.

• During CD operation:

Elapsed playing time

Clock

• During power off:

The power turns on and the clock time is shown

for 5 seconds, then the power turns off.

RADIO OPERATIONS

To stop searching before a station is

received, press the same button you have

pressed for searching.

Listening to the radio

You can use either automatic searching or

manual searching to tune in to a particular

station.

Searching a station manually:

Manual search

Searching a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM1

FM2

FM3

FM1

FM2

FM3

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

Selected band appears.

2 Press and hold ¢

or 4

until “M” (manual) starts flashing on

the display.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Start searching a station.

To search stations of

higher frequencies

To search stations of

lower frequencies

When a station is received, searching stops.

CONTINUED ON THE NEXT PAGE

Storing stations in memory

3 Tune in to a station you want while

“M” (manual) is flashing.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

To tune in to stations of

higher frequencies

• Manual preset of both FM and AM stations

To tune in to stations of

lower frequencies

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

• If you release your finger from the button,

the manual mode will automatically turns

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM

and 9 kHz intervals for AM—MW/LW) until

you release the button.

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

Each time you press the

button, the band changes as

follows:

When an FM stereo broadcast is hard to

receive:

FM1

FM2

FM3

1 Press M (MODE) to enter the

functions mode while listening

to an FM stereo broadcast.

2 Press and hold both buttons for

more than 2 seconds.

2 Press MO (monaural), while

still in the functions mode, so

that the MO indicator lights up

on the display.

Each time you press the

button, the MO indicator lights

up and goes off alternately.

MO (monaural) indicator

“- -SSM- -” appears, then disappears when

automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number

buttons—No.1 (lowest frequency) to No.6

(highest frequency).

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Ex.: Storing FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Each time you press the

button, the band changes as

follows:

Tuning in to a preset station

FM1

FM2

FM3

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 8 and 9.

2 Tune in to a station (in this example,

of 88.3 MHz).

To tune in to stations of

higher frequencies

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

To tune in to stations of

lower frequencies

FM1

FM2

FM3

2 Select the number (1 – 6) for the

preset station you want.

3 Press and hold the number button

(in this example, 1) for more than

2 seconds.

Note:

You can also use the 5 (up) or ∞ (down) button on

the unit to select the next or previous preset stations.

Each time you press the 5 (up) or ∞ (down) button,

the next or previous preset station is tuned in.

“P1” flashes for a few seconds.

RDS OPERATIONS

What you can do with RDS

To use Network-Tracking Reception

You can select the different modes of network-

tracking reception to continue listening to the

same programme in its finest reception.

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Another advantage of RDS function is called

“Enhanced Other Networks.” By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favorite

programme or traffic announcement while

listening to another programme or to another

source such as CD.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

activated with Regionalization set to

“off.”

With this setting, the unit switches to

another station within the same

network when the receiving signals

from the current station become

weak. (In this mode, the programme

may differ from the one currently

received.)

The AF indicator lights up but the

REG indicator does not.

By receiving the RDS data, this unit can do the

following:

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

• AF REG: Network-Tracking Reception is

activated with Regionalization set to

“on.”

With this setting, the unit switches to

another station, within the same

network, broadcasting the same

programme when the receiving

signals from the current station

become weak.

• And some other functions

Tracing the same programme

automatically (Network-Tracking

Reception)

Both the AF indicator and the REG

indicator light up.

• OFF:

Network-Tracking Reception is

deactivated.

Neither the AF indicator nor the REG

indicator lights up.

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting the

same programme with stronger signals. So, you

can continue to listen to the same programme in

its finest reception, no matter where you drive.

(See the illustration on page 16.)

REG indicator

AF indicator

Two types of the RDS data are used to make

Network-Tracking Reception work correctly

—PI (Programme Identification) and AF

(Alternative Frequency).

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

Using TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

the current source (another FM station or CD).

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 23.)

• TA Standby Reception will not work if you are

listening to an AM station.

Press T (TP/PTY) to activate TA Standby

Reception.

2 Select “AF-REG” (alternative

frequency/regionalization reception)

if not shown on the display.

7 When the current source is FM, the TP

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically tunes in to

the station. The volume changes to the

preset TA volume level (see page 15) and the

traffic announcement can be heard.

3 Select the desired mode—“AF,”

“AF REG,” or “OFF.”

• If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

4 Finish the setting.

signals. Press ¢

or 4

to search

for such a station.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

To deactivate the TA Standby Reception,

press T (TP/PTY) again. The TP indicator

disappears.

Using PTY Standby Reception

4 Finish the setting.

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from the current source

(another FM station or CD).

• PTY Standby Reception will not work if you are

listening to an AM station.

7 When the current source is FM, the PTY

indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

If a station starts broadcasting the selected

PTY programme, this unit automatically

tunes in to the station.

You can select your favorite programme type for

PTY Standby Reception.

When shipped from the factory, PTY Standby

Reception is turned off. (“OFF” is selected for

PTY Standby Reception.)

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated since the

station being received does not provide the

signals used for PTY Standby Reception.

To activate PTY Standby Reception, you

need to tune in to another station providing

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 23.)

these signals. Press ¢

or 4

search for such a station.

When a station providing these signals is

tuned in, the PTY indicator stops flashing

and remains lit. Now PTY Standby Reception

is activated.

2 Select “PTY STBY” (standby) if not

7 When the current source is other than

FM, the PTY indicator lights up.

If a station starts broadcasting the selected

PTY programme, this unit automatically

changes the source and tunes in to the

station.

shown on the display.

To deactivate the PTY Standby Reception,

select “OFF” in step 3 on the left column. The

PTY indicator disappears.

3 Select one of the twenty-nine PTY

codes. (See page 16.)

Selected code name

appears on the display

and is stored into

memory.

Searching your favorite programme

2 Select one of the twenty-nine PTY

codes. (See page 16.)

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

programme types in the number buttons.

When shipped from the factory, the following

6 programme types have been stored in the

number buttons (1 to 6).

Selected code name

appears on the display.

To store your favorite programme types, see

below.

3 Press and hold the number button

for more than 2 seconds to store the

PTY code selected into the preset

number you want.

To search your favorite programme type, see

page 14.

POP M

ROCK M

EASY M

CLASSICS

AFFAIRS

VARIED

To store your favorite programme types

“MEMORY” and the selected code name will

flash alternately.

1 Press and hold T (TP/PTY) for more

than 2 seconds while listening to an

FM station.

4 Press and hold T (TP/PTY) for more

than 2 seconds to exit from this

mode.

The last selected PTY code appears.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

• If there is no station broadcasting a

programme of the same PTY code as you

selected, the station will not change.

To search your favorite programme type

1 Press and hold T (TP/PTY) for more

than 2 seconds while listening to an

FM station.

Note:

In some areas, the PTY search will not work correctly.

Other convenient RDS

The last selected PTY code appears.

functions and adjustments

2 To select one of your favorite

Automatic selection of the station

when using the number buttons

programme type

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

To select any one of the twenty-nine

PTY codes

• The unit takes some time to tune in to another

station using programme search.

To activate programme search, follow the

procedure below.

• See also “Changing the general settings

(PSM)” on page 22.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

Ex.: When “ROCK M” is selected

2 Press ¢

or 4

to select

3 Press ¢

or 4

to start PTY

“P(Programme)-SEARCH.”

search for your favorite programme.

3 Turn the control dial clockwise to select “ON.”

Now programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

Changing the display mode while

listening to an FM station

You can change the initial indication on the

display to station name (PS NAME), station

frequency (FREQ), or clock time (CLOCK) while

listening to an FM RDS station.

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the

preset level.

• See also “Changing the general settings

(PSM)” on page 22.

• See also “Changing the general settings

(PSM)” on page 22.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press ¢

(volume).

or 4

to select “TA VOL”

2 Press ¢

or 4

to select

3 Turn the control dial to set to the desired

volume.

You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

“DISPMODE” (display mode).

3 Turn the control dial to set to the desired

indication (“PS NAME,” “FREQ,” or “CLOCK”).

4 Press SEL (select) to finish the setting.

Note:

Automatic clock adjustment

By pressing DISP (display), you can change the

display while listening to an FM RDS station only.

Each time you press the button, the following

information appears on the display:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS

signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings

(PSM)” on page 22.

Station name

(PS NAME)

Station frequency

(FREQ)

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

Programme type

(PTY)

2 Press ¢

or 4

to select “AUTO

ADJ” (adjustment).

3 Turn the control dial counterclockwise to select

“OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

Clock

(CLOCK)

To reactivate clock adjustment, repeat the

same procedure and select “ON” in step 3 by

turning the control dial clockwise.

• Then, the display goes back to the original

indication in several seconds.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

PTY codes

NEWS:

AFFAIRS:

News

SOCIAL:

Programmes on social

activities

Topical programmes expanding

on current news or affairs

Programmes which impart

advice on a wide variety of topics

Sport events

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

INFO:

nature of existence or ethics

SPORT:

PHONE IN: Programmes where people can

express their views either by

EDUCATE: Educational programmes

DRAMA: Radio plays

phone or in a public forum

CULTURE: Programmes on national or

regional culture

TRAVEL:

LEISURE:

JAZZ:

Programmes about travel

destinations, package tours,

and travel ideas and

opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing,

etc.

SCIENCE:

Programmes on natural science

and technology

VARIED:

Other programmes like comedies

or ceremonies

POP M:

Pop music

ROCK M:

EASY M:

LIGHT M:

Rock music

Easy-listening music

Light music

Jazz music

COUNTRY: Country music

NATION M: Current popular music from

another nation or region, in that

country’s language

OLDIES:

FOLK M:

CLASSICS: Classical music

OTHER M: Other music

WEATHER: Weather information

FINANCE: Reports on commerce, trading,

the Stock Market, etc.

Classic pop music

Folk music

CHILDREN: Entertainment programmes for

children

DOCUMENT: Programmes dealing with

factual matters, presented in an

investigative style

The same programme can be received on different frequencies.

Programme 1

broadcasting on

frequency A

Programme 1

broadcasting on

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

frequency C

Programme 1

broadcasting on

frequency D

CD OPERATIONS

The display changes to show the following:

The CD–in indicator lights up.

Playing a CD

1 Open the control panel.

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing

CD turns on the unit and starts playback

automatically.

Total playing time

of the inserted disc of the inserted disc

Total track number

2 Insert a CD into the loading slot.

The unit turns on, draws

the CD and starts

playback automatically.

Elapsed playing time Current track

All tracks will be played repeatedly until you

stop playback.

3 Close the control panel by hand.

Notes:

• When a CD is inserted upside down, the CD

automatically ejects (if the control panel is open).

If the control panel is closed, the source changes to

the tuner, “PLEASE” and “EJECT” appear

alternately, while the CD–in indicator flashes on

the display.

• When you open the control panel by pressing 0, the

CD automatically ejects.

• If there is no CD in the loading slot, you cannot

select CD as the source. “NO DISC” appears on

the display.

About mistracking:

Mistracking may result from driving on extremely

rough roads. This does not damage the unit and

the CD, but will be annoying.

We recommend that you stop CD play while

driving on such rough roads.

To stop play and eject the CD

To go to a particular track directly

Press 0.

Press the number button corresponding to the

track number to start its playback.

CD play stops and the control panel flips down.

The CD automatically ejects from the loading

slot. The source changes to the tuner (you will

hear the last received station).

• If you change the source, the CD play also

stops (without ejecting the CD).

Next time you select “CD” as the source, CD

play starts from where playback has been

stopped previously.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than

one second.

Notes:

• If the ejected CD is not removed for about 15

seconds, the CD is automatically inserted again

into the loading slot to protect it from dust.

(CD play will not start this time.)

To go to a track quickly (+10 and –10 buttons)

1 Press M (MODE) to enter the functions mode

• You can eject the CD even when the unit is turned off.

while playing a CD.

Locating a track or a

particular portion on a CD

2 Press +10 or –10.

To fast-forward or reverse the track

To skip 10 tracks* forwards

to the last track

Press and hold ¢

while playing a CD, to

fast-forward the track.

To skip 10 tracks* backwards

to the first track

Press and hold 4

while playing a CD, to

reverse the track.

* The first time you press +10 or –10 button,

the track skips to the nearest higher or

lower track with a track number of multiple

ten (ex. 10th, 20th, 30th).

Then each time you press the button, you can

skip 10 tracks (see “How to use the +10 and

–10 buttons” on page 19).

To go to the next or previous tracks

Press ¢

briefly, while

playing a CD, to go ahead

to the beginning of the next

track.

• After the last track, the first track will be

selected, and vice versa.

Each time you press the

button consecutively, the

beginning of the next tracks

is located and played back.

Press 4

briefly, while playing a CD, to

go back to the beginning of the current track.

Each time you press the button consecutively,

the beginning of the previous tracks is located

and played back.

To play back tracks repeatedly

(Track Repeat Play)

How to use the +10 and –10 buttons

• Ex. 1: To select track number 32 while

playing track number 6

You can play back the current track repeatedly.

1 Press M (MODE) to enter the

functions mode while playing

a CD.

2 Press RPT (repeat), while

still in the functions mode, so

that “TRK RPT” appears on

the display.

(Three times)

(Twice)

Track 6

\ 10 \ 20 \ 30

\ 31 \ 32

Each time you press the

button, track repeat play

mode turns on and off

alternately.

• Ex. 2: To select track number 8 while playing

track number 36

(Three times)

(Twice)

RPT indicator

Track 36

\ 30 \ 20 \ 10 \ 9 \ 8

When track repeat play is turned on, the RPT

indicator lights up on the display. The current

track starts playing repeatedly.

Selecting CD playback modes

To play back tracks at random

(Disc Random Play)

Prohibiting CD ejection

You can play back all tracks on the CD at random.

You can prohibit CD ejection and can lock a CD

in the loading slot.

1 Press M (MODE) to enter the

functions mode while playing

a CD.

While pressing CD, press and hold

for more than 2 seconds.

2 Press RND (random), while

still in the functions mode, so

that “DISC RND” appears on

the display.

Each time you press the

button, disc random play

mode turns on and off

alternately.

“NO EJECT” flashes on the display for about 5

seconds, and the CD is locked and cannot be

ejected.

RND (disc random) indicator

To cancel the prohibition and unlock the CD

While pressing CD, press and hold

again for more than 2 seconds.

“EJECT OK” flashes on the display for about 5

seconds, and the CD is unlocked.

When disc random play is turned on, the

indicator lights up on the display. A track

randomly selected starts playing.

RND

SOUND ADJUSTMENTS

Indication

For:

Preset values

BAS TRE LOUD

Selecting preset sound modes

(C-EQ: custom equalizer)

USER

ROCK

(Flat sound)

OFF

Rock or

disco music

+03

+01

You can select a preset sound mode (C-EQ:

custom equalizer) suitable to the music genre.

CLASSIC Classical

music

+01

–02

OFF

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

POPS

Light music

+04

+01

OFF

HIP HOP Funk or rap +02

music

1 Press M (MODE) to enter the

JAZZ

Jazz music

+02

+03

OFF

functions mode.

Note:

You can adjust each sound mode to your preference.

Once you make an adjustment, it is automatically

stored for the currently selected sound mode. See

“Adjusting the sound” on page 21.

2 Press EQ (equalizer), while still in

the functions mode.

The last selected sound mode

is recalled and applied to the

current source.

Ex.: If you have selected “USER” previously

3 Select the sound mode you want.

Each time you press the

button, the sound modes

change as follows:

USER

JAZZ

ROCK

CLASSIC

POPS

HIP HOP

The EQ indicator lights up when any sound

mode other than “USER” is selected.

Ex.: When you select “ROCK”

Adjusting the sound

2 Adjust the setting.

You can adjust the sound characteristics to your

preference.

To increase the level or

turn on the loudness

To decrease the level or

turn off the loudness

1 Select the item you want to adjust.

Each time you press the

button, the adjustable items

change as follows:

Equalization pattern changes as

you adjust the bass or treble.

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

LOUD

BAL

Ex. 1: When you adjust “TRE” (treble)

(volume)

(loudness)

(balance)

Indication

To do:

Adjust the bass.

Range

BAS*¹

TRE*¹

FAD*²

BAL

–06 (min.)

Ex. 2: When you turn on the loudness

+06 (max.)

Adjust the treble. –06 (min.)

3 Repeat steps 1 and 2 to adjust the

other items.

+06 (max.)

Adjust the front

and rear speaker

balance.

R06 (Rear only)

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

page 20.

F06 (Front only)

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

LOUD*¹

Boost low and high

frequencies to

produce a well-

balanced sound

at low volume

level.

LOUD ON

LOUD OFF

VOL*³

Adjust the volume. 00 (min.)

50 (max.)

When you adjust the bass, treble, or loudness, the

adjustment you have made is stored for the

currently selected sound mode (C-EQ) including

“USER.”

If you are using a two-speaker system, set the fader

level to “00.”

Normally the control dial work as the volume

control. So you do not have to select “VOL” to

adjust the volume level.

OTHER MAIN FUNCTIONS

To select the level meter—LEVEL

You can select the level display according to your

preference.

Changing the general settings

(PSM)

When shipped from the factory, “AUDIO 2” is

selected.

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode)

control.

• AUDIO 1: Shows the audio level indicator.

• AUDIO 2: Alternates “AUDIO 1” setting and

illumination display.

Basic Procedure

• OFF:

Erases the audio level indicator.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 23.)

To select the dimmer mode—DIMMER

(Only for KD-SC800R)

When you turn on the car headlights, the display

automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer

mode is activated.

• AUTO:

• OFF:

• ON:

Activates Auto Dimmer.

Cancels Auto Dimmer.

Always dims the display.

2 Select the PSM item you want to

adjust. (See page 23.)

Note:

Auto Dimmer equipped with this unit may not work

correctly on some vehicles, particularly on those

having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

3 Adjust the PSM item selected.

To select the telephone muting—TEL

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2”

whichever mutes the sounds from this unit.

When shipped from the factory, this mode is

deactivated.

• MUTING 1: Select this if this setting can mute

the sounds.

• MUTING 2: Select this if this setting can mute

the sounds.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the setting.

• OFF:

Cancels the telephone muting.

Preferred Setting Mode (PSM) items

• For detailed operations of each PSM items, refer to the pages listed in the table.

Factory-preset See

Indications

Selectable values/items

settings

page

CLOCK H

CLOCK M

24H/12H

Hour adjustment

Back

Advance

0:00

Minute adjustment

24/12-hour time display

12H

24H

OFF

AUTO ADJ Automatic clock setting

PS NAME

FREQ

DISPMODE Display mode

PS NAME

10, 11

CLOCK

AF REG

AF-REG

Alternative frequency/

Regionalization reception

OFF

29 programme types

(see page 16)

OFF

PTY STBY PTY standby

OFF

TA VOL

Traffic announcement

volume

VOL 00 – VOL 50

VOL 20

P-SEARCH Programme search

OFF

AUDIO 1

AUDIO 2

LEVEL

DIMMER*

TEL

Level display

AUDIO 2

OFF

AUTO

OFF

Dimmer mode

Telephone muting

AUTO

OFF

MUTING 1

MUTING 2

OFF

* Only for KD-SC800R.

Selecting the display color

Changing the standard plate

This section is only for KD-SC800R.

You can select the color of the display according

to your preference.

You can change the standard plate with another

plate supplied with your unit.

When shipped from the factory, “ALL DEMO” is

selected.

You can also download them by visiting

<http://www.jvc.co.jp/jvccar>.

• When changing the plate, be careful not to

leave your fingerprints on the plate or cover.

1 Press and hold DISP (display) for a

while.

1 Loosen the screws with the supplied

The last selected setting

appears on the display.

hex screwdriver.

2 Select the setting or color you want.

Each time you press the

button, the selection

changes as follows:

2 Remove the plate cover and the

ALL DEMO O SOURCE O BLUE O

OCEAN O PURPLE O PINK O

standard plate.

ROSE O RED O (back to the beginning)

• When “ALL DEMO” is selected:

The display color changes every 6 seconds.

(rose = pink = ocean = red = purple

= blue = back to the beginning)

Standard plate

• When “SOURCE” is selected:

The display color is fixed to red while

listening to FM or AM, and to blue while

listening to CD.

Plate cover

3 Finish the setting.

Note:

If no operation is done for about 15 seconds or if any

other button is pressed, the setting is also finished.

3 Replace with another plate (a

standard, cutout, or downloaded

plate) of your preference.

How to use the cutout plates

1 Unfold the supplied cutout plates.

• When attaching a standard plate

Standard plate

2 Cut the plates out using a scissors.

Plate cover

• When attaching a cutout or downloaded

plate

Add the transparent plate (supplied)

between the cutout or downloaded plate

and the plate cover in order to attach the

plate cover in place.

3 Trim out the window and two knobs using a

knife on a rubber mat.

Cutout or

downloaded

plate

Plate cover

Transparent plate

(supplied)

Notes:

• Be sure to keep the hex screwdriver for future use.

• Four spare screws for the plate cover attachment

are provided with the unit. (See the Installation/

Connection Manual.)

• When you attach the plate cover, do not tighten the

screws too hard; otherwise, the plate cover might

be cracked.

Attaching the control panel

Detaching the control panel

1 Insert the right side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the left side of the control

panel to fix it to the panel holder.

2 Pull the control panel out of the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

USING THE REMOTE CONTROLLER

This unit can be remotely controlled as instructed

3. Return the battery holder.

here (with an optionally purchased remote

controller). We recommend that you use remote

controller RM-RK50 or RM-RK60 with your unit.

(Ex.: When you are using RM-RK60)

Insert again the battery holder by pushing it

until you hear a clicking sound.

(back side)

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

Remote sensor

WARNING:

• Store the battery in a place where children

cannot reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not recharge, short, disassemble, or heat the

battery or dispose of it in a fire.

Doing any of these things may cause the battery

to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic

materials.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

Doing this may cause the battery to give off

heat, crack, or start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may start to give off heat, crack, or start

a fire.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off

heat, crack, or start a fire.

Installing the battery

When the controllable range or effectiveness

of the remote controller decreases, replace

the battery.

1. Remove the battery holder.

1) Push out the battery holder in the

direction indicated by the arrow using a

ball point pen or a similar tool.

2) Remove the battery holder.

CAUTION:

DO NOT leave the remote controller in a place

(such as dashboards) exposed to direct sunlight

for a long time. Otherwise, it may be damaged.

(back side)

2. Place the battery.

Slide the battery into the holder with the

+ side facing upwards so that the battery

is fixed in the holder.

Lithium coin

battery (product

number: CR2025)

3 Selects the preset stations while listening to

the radio.

Location of the buttons

Each time you press the button, the preset

station number increases, and the selected

station is tuned in.

RM-RK60

4 Selects the sound mode (C-EQ: custom

equalizer).

Each time you press the button, the sound

mode (C-EQ) changes.

5 Selects the band while listening to the radio.

Each time you press the button, the band

changes.

6 Selects the source.

Each time you press the button, the source

changes.

7 Functions the same as the control dial on the

main unit.

Note: These buttons do not function for the

preferred setting mode adjustment.

1 • Turns on the unit if pressed when the unit is

turned off.

• Turns off the unit if pressed and held until

“SEE YOU” appears on the display.

• Drops the volume level in a moment if

pressed briefly.

Press again to resume the volume.

2 • Searches for stations while listening to the

radio.

• Fast-forwards or reverses the track if

pressed and held while listening to a CD.

• Skips to the beginning of the next track or

goes back to the beginning of the current (or

previous) tracks if pressed briefly while

listening to a CD.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the Adjust it to the optimum level.

minimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work at

all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

Press the reset button on the

panel holder after detaching the

control panel. (The clock setting

and preset stations stored in

memory are erased.)

(See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Signals are too weak.

Store stations manually.

• Static noise while listening

to the radio.

The aerial is not connected

firmly.

Connect the aerial firmly.

Insert the CD correctly.

• CD cannot be played back. CD is inserted upside down.

• CD-R/CD-RW cannot be

played back.

• Tracks on the CD-R/CD-RW

cannot be skipped.

CD-R/CD-RW is not finalized. • Insert a finalized CD-R/

CD-RW.

• Finalize the CD-R/CD-RW

with the component which

you used for recording.

• CD cannot be ejected.

CD is locked.

Unlock the CD. (See page 19.)

• CD sound is sometimes

interrupted.

You are driving on rough

roads.

Stop playback while driving on

rough roads.

CD is scratched.

Change the CD.

Connections are incorrect.

Check the cords and

connections.

• “NO DISC” appears on the

display.

No CD is in the loading slot.

CD is inserted incorrectly.

Insert a CD into the loading slot.

Insert the CD correctly.

MAINTENANCE

Handling discs

When playing a CD-R or CD-RW

Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

• Use only “finalized” CD-Rs or CD-RWs.

• Some CD-Rs or CD-RWs may not play back on

this unit because of their disc characteristics,

and for the following reasons:

– Discs are dirty or scratched.

– Moisture condensation on the lens inside the

unit.

– The pickup lens inside the unit is dirty.

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower than

that of regular CDs.

• CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity, so do not leave

them inside your car.

• Do not use following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

This unit has been designed to reproduce CDs,

CD-Rs (Recordable), and CD-RWs (Rewritable).

• This unit is not compatible with MP3 discs.

How to handle discs

When removing a disc

from its case, press down

the center holder of the case

and lift the disc out, holding

it by the edges.

Center holder

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

– Discs on which labels can be directly printed

by an ink jet printer.

To keep discs clean

Using these discs under high temperatures or

high humidity may cause malfunctions or

damage to discs. For example,

– Stickers or labels may shrink and warp a

disc.

A dirty disc may not play correctly.

If a disc does become dirty, wipe it

with a soft cloth in a straight line

from center to edge.

– Stickers or labels may peel off so discs

cannot be ejected.

– Print on discs may get sticky.

Read instructions or cautions about labels and

printable discs carefully.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

unit may reject the disc.

To remove these rough spots, rub

the edges with a pencil or ball-point pen, etc.

CAUTIONS:

• Do not insert 8 cm discs (single CDs) into the

loading slot. (Such discs cannot be ejected.)

• Do not insert any disc of unusual shape—like a

heart or flower; otherwise, it will cause a

malfunction.

• Do not expose discs to direct sunlight or any

heat source or place them in a place subject to

high temperature and humidity. Do not leave

them in a car.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and leave

the unit turned on for a few hours until the

moisture evaporates.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean discs.

Sticker

Stick-on

Sticker

residue

Warped

disc

Disc

label

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

45 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Front:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

Rear:

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Tone Control Range:

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

188 mm × 58 mm × 12 mm

Mass (approx.):

TUNER SECTION

Frequency Range:

1.4 kg (excluding accessories)

FM:

AM:

87.5 MHz to 108.0 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity:

11.3 dBf (1.0 µV/75 Ω)

Design and specifications are subject to change

without notice.

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

If you want some additional downloaded

plates, you can download them by visiting

<http://www.jvc.co.jp/jvccar>.

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

EN, GE, FR, NL

0203KKSMDTJEIN

KD-SC800R/KD-S901R

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

GET0146-004A

[E/EX]

0203KKSMDTJEIN

EN, GE, FR, NL

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems.

• Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

• Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE.

• Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met negatieve

aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical installation. • Die folgende Abbildung zeigt einen typischen

• L’illustration suivante est un exemple d’installation

typique. Cependant, vous devez faire les

ajustements correspondant à votre voiture

particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation,

consulter votre revendeur d’autoradios JVC ou une

compagnie d’approvisionnement.

• Op de volgende afbeelding kunt u zien hoe de installatie,

However, you should make adjustments

corresponding to your specific car. If you have any

questions or require information regarding

installation kits, consult your JVC IN-CAR

ENTERTAINMENT dealer or a company supplying

kits.

Einbau. Dennoch müssen Sie entsprechend Ihrem

jeweiligen Auto Anpassungen vornehmen. Bei

irgendwelchen Fragen oder wenn Sie Informationen

hinsichtlich des Einbausatzes brauchen, wenden

Sie sich an ihren JVC Autoradiohändler oder ein

Unternehmen das diese Einbausätze vertreibt.

normaal gesproken, in zijn werk gaat. U moet echter bij

de installatie rekening houden met de bijzonderheden

van uw eigen auto. Neem bij vragen of voor meer

bijzonderheden over inbouwpakketten contact op met uw

JVC car audio dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

1 Vor dem Einbau: Drücken Sie

(Freigabe der 1 Avant le montage: Appuyer sur

(déblocage

du panneau de commande) pour éventeullement

détacher le panneau de commande.

1 Voordat u aan de montage van het apparaat

1 Before mounting: Press

(control panel

release button) to detach the control panel if

already attached.

Schalttafel), um die Arretierung der Schalttafel zu

lösen, sofern diese bereits angebracht ist.

begint: Druk op

(het bedieningspaneel

vrijgeven) als u het bedieningspaneel wilt

loskoppelen indien dit aan de eenheid is

vastgekoppeld.

* Lorsque ce panneau de commande sort d’usine,

il est rangé dans un étui de transport.

* Bei der Auslieferung ab Werk ist die Schalttafel

im Etui verpackt.

* When shipped from the factory, the control

panel is packed in the hard case.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpackt meegeleverd.

2 Retirer la plaque d’assemblage.

2 Den Frontrahmen herausnehmen.

2 Remove the trim plate.

3 Libérer les verrous du manchon et retirer le manchon.

3 Die Halterung nach dem Entriegeln der

3 Remove the sleeve after disengaging the sleeve

2 Verwijder de sierplaat.

Halterungensperren abnehmen.

1 Poser l’appareil à la verticale.

locks.

3 Verwijder het huis nadat u de klemmen hebt

1 Das Gerät aufstellen.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

1 Stand the unit.

losgemaakt.

Hinweis: Beim Aufstellen des Geräts darauf

achten, daß die Sicherung auf der Rückseite

nicht beschädigt wird.

Note: When you stand the unit, be careful

not to damage the fuse on the rear.

1 Zet het apparaat rechtop.

Opmerking: Wanneer u het apparaat rechtop

zet, moet u erop letten dat u de zekering aan de

achterkant niet beschadigt.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé les

verrous de manchon.

2 Insert the 2 handles between the unit and

the sleeve, as illustrated, to disengage the

sleeve locks.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und die

Halterungensperren entriegeln.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

3 Retirer le manchon.

3 Remove the sleeve.

3 Die Halterung entfernen.

Remarque: S’assurer de garder les poignées

pour une utilisation ultérieur, après l’installation

de l’appareil.

Note: Be sure to keep the handles for future

use after installing the unit.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

3 Verwijder het huis.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in de

toekomst kunt gebruiken.

4 Install the sleeve into the dashboard.

4 Installer le manchon dans le tableau de bord.

* After the sleeve is correctly installed into the

dashboard, bend the appropriate tabs to hold

the sleeve firmly in place, as illustrated.

4 Die Halterung im Armaturenbrett einbauen.

* Après installation correcte du manchon dans le

tableau de bord, plier les bonnes pattes pour

maintenir fermement le manchon en place,

comme montré.

* Nach dem korrekten Einbau der Halterung im

Armaturenbrett, die entsprechenden Riegel

umknicken, um die Halterung an ihrem Platz zu

sichern, siehe Abbildung.

4 Installeer het huis in het dashboard.

* Nadat het huis op de juiste wijze in het dashboard

is geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

5 Fix the mounting bolt to the rear of the unit’s

body and place the rubber cushion over the end

of the bolt.

5 Monter le boulon de montage sur l’arrière du corps

de l’appareil puis passer l’amortisseur en

caoutchouc sur l’extrémité du boulon.

5 Die Befestigungsschraube an der Rückseite des

Gerätekörpers befestigen und das Ende der

Schraube mit einem Gummipuffer abdecken.

5 Maak de bevestigingsbout aan de achterkant van het

apparaat vast en plaats de rubberdop over het uiteinde

van de bout.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

8 Attach the trim plate.

6 Réalisez les connexions électriques.

6 Nehmen Sie die erforderlichen elektrischen

6 Breng de vereiste elektrische verbindingen tot stand.

7 Schuif het apparaat in het huis totdat het vergrendeld is.

8 Bevestig een sierplaat.

Anschlüsse vor.

7 Faire glisser l’appareil dans le manchon jusqu’à ce

qu’il soit verrouillé.

7 Das Gerät in die Halterung schieben, bis es einrastet.

Note: Ensure the recessed part is at the bottom.

8 Attachez la plaque d’assemblage.

If not, the control panel will not open completely.

8 Befestigen Sie den Frontrahmen.

Remarque: Assurez-vous que la partie encastrée

est en bas. Sinon, le panneau de commande ne

pourra pas être ouvert complètement.

Opmerking: Zorg dat het ingedeukte gedeelte onder

is. Het bedieningspaneel kan anders namelijk niet

geheel worden geopend.

Hinweis: Vergewissern Sie sich, dass sich die

Aussparung an der Unterseite befindet. Ist dies

nicht der Fall, lässt sich die Bedienungsblende

nicht vollständig öffnen.

9 Attach the control panel.

9 Remonter le panneau de commande.

9 Bevestig het bedieningspaneel.

9 Die Schalttafel anbringen.

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Rubber cushion

Gummipuffer

Amortisseur en

caoutchouc

Rubberdop

184 mm

Sleeve

Halterung

Manchon

53 mm

Handle

Griff

Poignée

Hendel

Huis

Mounting bolt

Befestigungsschraube

Boulon de montage

Bevestigingsbout

4 *

Slot

Fuse

Schlitz

Fente

Sleuf

Sicherung

Fusible

Zekering

See “ELECTRICAL CONNECTIONS.”

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Sleeve

Control panel

Trim plate

Halterung

Manchon

Huis

Schalttafel

Frontrahmen

Plaque d’assemblage

Sierplaat

Lock Plate

Panneau de commande

Bedieningspaneel

Arretierplättchen

Plaque de verrouillage

Vergrendelingsplaat

Zie “ELEKTRISCHE VERBINDINGEN”.

TROUBLESHOOTING

* Are the red and black leads connected correctly?

• Power cannot be turned on.

* Is the yellow lead connected?

FEHLERSUCHE

EN CAS DE DIFFICULTES

* Les fils rouge et noir sont-ils racordés

correctement?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

PROBLEMEN OPLOSSEN

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• Le fusible saute.

• De zekering slaat door.

* Zijn de rode en de zwarte draden op de juiste manier

aangesloten?

• Stromversorgung kann nicht eingeschaltet

werden.

* Ist die gelbe Leitung angeschlossen?

• Kein Ton aus den Lautsprechern.

Ist die Lautsprecherausgangsleitung kurzgeschlossen?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded • Ton verzerrt.

in common?

• Le son est déformé.

• Het geluid wordt vervormd.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• Unit becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded • Gerät wird heiß.

in common?

• L’appareil devient chaud.

• Het apparaat raakt verhit.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• When using the optional stay

• When installing the unit without using the sleeve

• Beim Einbau des Geräts ohne Halterung

• Beim Verwenden der Anker-Option

• Lors de l’utilisation du hauban en option

• Wanneer u de steun gebruikt (facultatief)

• Lors de l’installation de l’appareil scans utiliser de manchon

• Wanneer u het apparaat zonder huis installeert

In a Toyota for example, first remove the car radio and install the unit in its place.

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

Fire wall

Feuerwand

Cloison

Stay (option)

Anker (Option)

Hauban (en option)

Steun (facultatief)

Washer

Unterlegscheibe

Rondelle

Brandscherm

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

* Not included with this unit.

Sluitring

* Nicht Teil dieses Geräts.

* Non fourni avec cet appareil.

* Niet meegeleverd.

Lock nut

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

Dashboard

Armaturenbrett

Tableau de bord

Bracket*

Konsole*

Support*

Console*

Dashboard

Screw (option)

Schraube (Option)

Vis (en option)

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Schroef (facultatief)

Pocket

Taschen

Poche

Zak

Mounting bolt

Sleeve

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Bracket*

Konsole*

Support*

Console*

Halterung

Manchon

Huis

Install the unit at an angle of less

than 30˚.

Stellen Sie das Gerät mit einem

Winkel von weniger als 30˚ auf.

Installez l’appareil avec un angle

de moins de 30˚.

Note

: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are used,

they could damage the unit.

: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet werden. Werden

längere Schrauben verwendet, können sie das Gerät beschädigen.

Less than 30˚

Hinweis

Weniger als 30˚

Moins de 30˚

Kleiner dan 30˚

Remarque : Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 6 mm. Si des

vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Opmerking : Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als u langere schroeven

Installeer het toestel met een hoek

kleiner dan 30˚.

gebruikt, kan het apparaat worden beschadigd.

Removing the unit

^•1^BeR^foe^rm^eo^reve^mt^oh^veⁱⁿc^go^tn^htr^eo^ul ⁿpa^it,n^re^el.^{lease the rear section.}

Ausbau des Geräts

• Vor dem Ausbau des Geräts den hinteren Teil

Retrait de l’appareil

Verwijderen van het apparaat

• Voordat u het apparaat verwijdert, moet u het

1^acV^hte^er^rw^geij^dd^ee^er^lth^ee^lt^ob^se^md^aie^kn^eiⁿn^.gspaneel.

^•1^AvR^aeⁿt^tir^de^er ^rle^etp^ira^en^rn^l’e^aa^pu^pad^re^eic^l,o^lim^bém^rea^rnd^lae.^{section arrière.}

1^freD^ige^en^bS^ecⁿh^.alttafel abnehmen.

Remove the trim plate.

Retirer la plaque d’assemblage.

Den Frontrahmen herausnehmen.

Verwijder de sierplaat.

Insert the 2 handles into the slots, as shown.

Introduire les 2 poignées dans les fentes, comme

montré. Puis, tout en tirant doucement les

poignées écartées, faire glisser l’appareil pour le

sortir. (S’assurer de conserver les poignées

après l’installation de l’appareil.)

Then, while gently pulling the handles away from 3 Die 2 Griffe in die Schlitze wie gezeigt stecken.

Plaats de 2 hendels, zoals afgebeeld, in de sleuven.

Daarna duwt u de hendels zachtjes uit elkaar en kunt u

het apparaat naar buiten schuiven. (Bewaar de

hendels nadat u het apparaat hebt

geïnstalleerd!)

each other, slide out the unit. (Be sure to keep

Dann die Griffe behutsam auseinander ziehen

und das Gerät herausziehen. (Die Griffe nach

dem Einbau auf jeden Fall aufbewahren.)

the handles after installing it.)

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Handle

Griff

Poignée

Hendel

Frontrahmen

Plaque d’assemblage

Sierplaat

Parts list for installation and

Teileliste für den Einbau und

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

connection

Anschluß

raccordement

installatie en aansluiting nodig hebt

De volgende onderdelen worden bij het apparaat geleverd.

Het tussen haakjes aangegeven cijfer toont het aantal van

het bijgeleverde onderdeel.

The following parts are provided with this unit. The

number in parentheses indicates the quantity of the

pieces supplied.

Die folgenden Teile werden zusammen mit diesem

Gerät geliefert. Die Zahl in Klammern gibt die Menge Le nombre entre parenthèses indique la quantité de

der zum Lieferumfang gehörigen Teile an.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Les pièces suivantes sont fournies avec cet appareil.

pièces fournies.

After checking them, please set them correctly.

Après vérification, veuillez les placer correctement.

Installeer ze op de juiste wijze, nadat u ze hebt

gecontroleerd.

Hard case/Control panel (1)

Etui/Schalttafel (1)

Etui de transport/Panneau de

commande (1)

Sleeve (1)

Halterung (1)

Manchon (1)

Huis (1)

Trim plate (1)

Power cord (1)

Stromkable (1)

Cordon d’alimentation (1)

Stroomkabel (1)

Frontrahmen (1)

Plaque d’assemblage (1)

Sierplaat (1)

Behuizing/Bedieningspaneel (1)

Handles (2)

Griffe (2)

Poignées (2)

Hendels (2)

Washer—ø5 (1)

Unterlegscheibe—ø5 (1)

Rondelle—ø5 (1)

Lock nut—M5 (1)

Mounting bolt—M5 x 20 mm (1)

Rubber cushion (1)

Gummipuffer (1)

Amortisseur en caoutchouc (1)

Rubberdop (1)

Sicherungsmutter—M5 (1)

Ecrou d’arrêt—M5 (1)

Contra-moer—M5 (1)

Befestigungsschraube—M5 x 20 mm (1)

Boulon de montage—M5 x 20 mm (1)

Bevestigingsbout—M5 x 20 mm (1)

Sluitring—ø5 (1)

Only for KD-SC800R / Nur für KD-SC800R / Seulement pour le KD-SC800 / Alleen voor de KD-SC800R

See pages 24 and 25 of the Instructions for the usage of the following parts.

Witere Informationen finden Sie auf den Seiten 24 und 25 der Bedienungsanleitung der folgenden Teile.

Référez-vous à la pages 24 et 25 du mode d’emploi pour savoir comment utiliser les pièces suivantes.

Zie bladzijden 24 en 25 van de Aanwijzingen voor gebruik van deze onderdelen.

Additional standard plates (3) and transparent plate (1)

Zusätzliche Standardplatten (3) und transparente Platte (1)

Plaques standards additionnelles (3) et plaque transparente (1)

Extra standaardplaten (3) en transparant-plaat (1)

Cutout plates (printed on the sheet) (4)

Schablonen (auf das Blatt aufgedruckt) (4)

Plaques découpées (imprimées sur une feuille) (4)

Platen voor uitsnijding (gedrukt op het blad) (4)

Spare screws for the plate cover attachment

—M2 x 5 mm (4)

Ersatzschrauben für die Plattenabdeckung

—M2 x 5 mm (4)

Vis de rechange pour la fixation du couvercle de la

plaque—M2 x 5 mm (4)

Hex screwdriver (1)

Sechskantschraubendreher (1)

Clef hexagonale (1)

Zeshoekige sleutel (1)

Extra schroeven voor bevestiging van plaatafdekking

—M2 x 5 mm (4)

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

ELECTRICAL CONNECTIONS

ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN

To prevent short circuits, we recommend that you

Zur Vermeidung von Kurzschlüssen empfehlen wir,

daß Sie den negativen Batterieanschluß abtrennen

Pour éviter tout court-circuit, nous vous recommandons de Om kortsluiting te voorkomen adviseren wij u om de minpool

débrancher la borne négative de la batterie et d’effectuer tous van de accu los te maken en alle elektrische verbindingen tot

les raccordements électriques avant d’installer l’appareil. Si stand te brengen voordat u het apparaat in de auto installeert.

l’on n’est pas sûr de pouvoir installer correctement cet appareil, Als u niet zeker weet hoe u dit apparaat moet installeren, kunt u

disconnect the battery’s negative terminal and make all

electrical connections before installing the unit. If you are und alle elektrischen Anschlüsse herstellen, bevor

not sure how to install this unit correctly, have it installed das Gerät eingebaut wird. Sind Sie sich über den

by a qualified technician.

richtigen Einbau des Geräts nicht sicher, lassen Sie

es von einem qualifizierten Techniker einbauen.

le faire installer par un technicien qualifié.

dit beter door een daartoe gekwalificeerde technicus laten doen.

Note:

Remarque:

Opmerking:

This unit is designed to operate on 12 V DC, NEGATIVE Hinweis:

Cet appareil est conçu pour fonctionner sur des sources Dit apparaat mag worden gebruikt bij elektrische systemen

ground electrical systems. If your vehicle does not have Dieses Gerät ist für einen Betrieb in elektrischen

de courant continu de 12 V à masse NEGATIVE. Si

votre véhicule n’offre pas ce type d’alimentation, il

vous faut un convertisseur de tension, que vous

pouvez acheter chez un revendeur d’autoradios JVC.

die werken op 12 V gelijkstroom met negatieve

aarding. Als uw auto niet is uitgerust met een dergelijk

systeem, is een spanningsomzetter vereist. Dit instrument kan

worden aangeschaft bij JVC car audio dealers.

this system, a voltage inverter is required, which can be

purchased at JVC IN-CAR ENTERTAINMENT dealers.

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt. Verfügt Ihr Fahrzeug nicht über diese

Anlage, ist ein Spannungsinverter erforderlich, der

bei JVC Autoradiohändler erworben werden kann.

• Replace the fuse with one of the specified rating. If the

fuse blows frequently, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• If noise is a problem...

This unit incorporates a noise filter in the power circuit.

• Remplacer le fusible par un de la valeur précisée. Si • Vervang de zekering door een exemplaar met het

•

Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung häufig

le fusible saute souvent, consulter votre revendeur

aangegeven vermogen. Als de zekering vaak doorslaat,

moet u uw JVC car audio dealer raadplegen.

• Als u geluidsproblemen hebt…

d’autoradios JVC.

durch, wenden Sie sich an ihren JVC Autoradiohändler. • Si le bruit est un problème...

However, with some vehicles, clicking or other unwanted • Sind Störgeräusche ein Problem...

Cet appareil incorpore un filtre de bruit dans le circuit

d’alimentation. Cependant, avec certains véhicules,

quelques claquements ou autres bruits non désirés

risquent de se produire. Si cela arrive, raccorder la borne

arrière de masse de l’appareil au châssis de la voiture

(voir le diagramme de raccordement) en utiliscant des

cordons les plus gros et les plus courts possibles telle

qu’une barre de cuivre ou une tresse. Si le bruit persiste,

consulter votre revendeur d’autoradios JVC.

• La puisscance admissible des enceintes devrait

supérieure à 45 W à l’arrière et à 45 W l’avant, avec

une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse de

cet appareil au châssis de la voiture.

De krachtschakeling van dit apparaat heeft een ingebouwd

geluidsfilter. In sommige voertuigen zijn tikgeluiden of andere

ongewenste geluiden te horen. Als dit gebeurt, moet u de

massaklem aan de achterkant (zie aansluitingsschema)

aan het chassis van de auto vastmaken met behulp van een

kortere en dikkere kabel, zoals kopermanteldraad of tellerkabel.

Als het geluid niet verdwijnt, moet u contact opnemen met uw

JVC car audio dealer.

• Het maximum ingangsvermogen van de speakers moet

achterin meer dan 45 W zijn en voorin 45 W, met een

impedantie van 4 Ω tot 8 Ω.

• Zorg ervoor dat dit apparaat door middel van een

aardkabel is verbonden met het chassis van de auto.

• De warmte-opnemer kan na gebruik erg heet worden. Raak

de warmte-opnemer niet aan wanneer u dit apparaat van

zijn plaats haalt.

noise may occur. If this happens, connect the unit’s rear

ground terminal (see connection diagram) to the car’s

chassis using shorter and thicker cords, such as copper

braiding or gauge wire.If noise still persists, consult your

JVC IN-CAR ENTERTAINMENT dealer.

Dieses Gerät enthält ein Störfilter im Stromkreis. Bei

manchen Fahrzeugen kann jedoch ein Klicken oder andere

unerwünschte Störgeräusche auftreten. Sollte das der Fall

sein, die hintere Erdungscanschlußklemme (siehe

Schaltplan) des Geräts am Fahrwerk des Fahrzeugs

anschließen, dabei kürzere und dickere Kabel wie

beispielsweise Kupfergeflechtdraht oder Stahldraht

verwenden. Bleibt Störgeräusch bestehen, wenden Sie sich

an Ihren JVC Autoradiohändler.

• Maximum input of the speakers should be more than

45 W at the rear and 45 W at the front, with an

impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful

not to touch it when removing this unit.

• Die maximale Eingangsleistung der Lautsprecher

sollte mehr als 45 W hinten und 45 W vorn bei einer

Impedanz von 4 Ω bis 8 Ω betragen.

Heat sink

Abstrahlblech

Dissipateur de chaleur

Warmte-opnemer

•

Sicherstellen, daß das Gerät am Fahrwerk geerdet wird.

• Das Abstrahlblech wird nach dem Gebrauch sehr

heiß. Beim Ausbau des Geräts darauf achten, das

Abstrahlblech nicht zu berühren.

• Le dissipateur de chaleur devient très chaud après

usage. Faire attention de ne pas le toucher en

retirant cet appareil.

Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen

Before connecting: Check the wiring in the vehicle

carefully. Incorrect connection may cause serious

damage to this unit.

Vor dem Anschließen: Die Verdrahtung im Fahrzeug Avant de commencer la connexion: Vérifiez

Alvorens de verbindingen tot stand te brengen:

sorgfältig überprüfen. Falsche Anschlüsse können

ernsthafte Schäden am Gerät hervorrufen.

attentivement le câblage du véhicule. Une connexion

incorrecte peut endommager sérieusement l’appareil. kan door verkeerde verbindingen ernstige schade oplopen.

Moet u de bedrading in de auto zorgvuldig. Het apparaat

The leads of the power cord and those of the

Die Leiter des Stromkabels und die Leiter des Anschlusses Le fil du cordon d’alimentation et ceux des connecteurs De draden van het stroomsnoer verschillen mogelijk van

connector from the car body may be different in color. im Fahrzeug können sich farblich unterscheiden.

du châssis de la voiture peuvent être différents en couleur. kleur metde aansluitingen op het chassis van de auto.

1 Connect the colored leads of the power cord to the 1 Die farbigen Leitungen des Spannunsgversorgungskabels 1 Connectez les fils de couleur du cordon

1 Sluit de gekleurde snoerdraden van de stroomkable in

de hierna genoemde volgorde aan op de accu van de

auto, de luidsprekers en de antenne (indien aanwezig).

1 Zwart: aarde

car battery, speakers and power aerial (if any) in

the following sequence.

an der Autobatterie, ontstekingsschakelaarden

Lautsprechern und dem Motorantenne (sofern

vorhanden) in folgender Reihenfolge anschließen.

1 Schwarz: Erdung

d’alimentation à la batterie de la voiture, aux

enceintes et à l’antenne automatique (s’il y en a

une) dans l’ordre suivant.

1 Black: ground

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to remote lead of other

equipment or power aerial if any (200 mA max.)

5 Orange with white stripe: to car light control

switch—Only for KD-SC800R

1 Noir: à la masse

2 Geel: naar de accu van de auto (constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar afstandsdraad van

andere apparatuur of antenne met circuit indien

aanwezig (200 mA max.)

5 Oranje met witte streep: naar de schakelaar voor de

autoverlichting—Alleen voor de KD-SC800R

6 Bruin: naar het mobiele-telefoonsysteem (Lees voor

meer informatie de instructies die bij de mobiele

telefoon worden geleverd.)

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: zur einer Zubehöranschlußklemme

4 Blau mit weißem Streifen: zum Zusatzkabel

des anderen Geräts oder der Motorantenne,

sofern vorhanden (max. 200 mA)

2 Jaune: à la batterie de la voiture (12 V constant)

3 Rouge: à une borne accessoire

4 Bleu avec bande blanche:au fil de télécommande

de l’autre appareil ou à l’antenne automatique

s’il y en a une (200 mA max.)

5 Orange mit weißem Streifen: zum

Autolichtschalter—Nur für KD-SC800R

6 Braun: an Mobiltelefon (Weitere informationen

entnehmen Sie bitte der

5 Orange avec bande blanche: à l’interrupteur

d’éclairage de la voiture—Seulement pour le

KD-SC800R

6 Brown: to cellular phone system (For details,

refer to the instructions of the cellular phone.)

7 Others: to speakers

6 Marron: à un système de téléphone cellulaire

(Pour les détails, se référer aux instructions du

téléphone cellulaire.)

2 Connect the aerial cord.

Bedienungscanleitung des Mobiltelefons.)

7 Andere: zur Lautsprecher

7 Andere: naar de speakers

3 Finally connect the wiring harness to the unit.

2 Sluit de antenne aan.

Note: If your vehicle does not have any accessory

terminal, move the fuse from the fuse position 1

(initial position) to fuse position 2, and connect the red

lead (A7) to the positive (+) battery terminal.

• The yellow lead (A4) is not used in this case.

7 Autres: aux enceintes

2 Das Antennenkabel anschließen.

3 Verbind de draadbundel daarna met het apparaat.

2 Connectez le cordon d’antenne.

3 Die Kabelbäume am Gerät anschließen.

Opmerking: Als uw voertuig niet beschikt over een

aansluitklem, moet u de zekering verplaatsen van stand 1

(beginstand) naar stand 2 en moet u de rode draad (A7) met

de pluspool (+) van de accu verbinden.

3 Finalement, connectez le faisceau de fils à l’appareil.

Hinweis: Verfügt Ihr Fahrzeug nicht über eine

Zubehöranschlußklemme, die Sicherung von der 1.

Sicherungsposition (Erstposition) in die 2.

Remarque: Si votre véhicule ne possède pas de borne

accessoire, déplacez le fusible de la position de fusible 1

(position originale) à la position de fusible 2 et connectez

le fil rouge (A7) à la borne positive (+) de la batterie.

• Le fil jaune (A4) n’est pas utilisé dans ce cas.

Sicherungsposition versetzen, die rote Leitung (A7)

an der (+) Batterieanschlußklemme anschließen.

Die gelbe Leitung (A4) wird in diesem Fall nicht verwendet.

• In dit geval wordt de gele draad (A4) niet gebruikt.

•

To steering wheel remote controller—Only for KD-SC800R (see diagram

An Lenkradfernbedienung—Nur für KD-SC800R (siehe Schaltplan

Pour la télécommande de volant—Seulement pour le KD-SC800R (voir le diagramme

)

Only for KD-SC800R

Nur für KD-SC800R

Seulement pour le KD-SC800R

Alleen voor de KD-SC800R

)

Naar stuurwiel-afstandsbediening—Alleen voor de KD-SC800R (zie schema

)

Fuse position 2 / 2. Sicherungsposition /

Position de fusible 2 / Zekering, stand 2

B1 B3 B5 B7

B2 B4 B6 B8

Rear ground terminal

Hintere

Erdungscanschlußklemme

Borne arrière de masse

Massaklem aan de

A5 A7

Fuse position 1 / 1. Sicherungsposition /

A2 A4 A6 A8

B1 B3 B5 B7

Position de fusible 1 / Zekering, stand 1

B2 B4 B6 B8

A5 A7

15 A fuse / 15 A Sicherung /

A2 A4 A6 A8

Not included with this unit.

Wird nicht mit Gerät mitgeliefert.

Non fourni avec cet appareil.

Ignition switch

Zündschalter

Interrupteur d’allumage

Ontstekingsschakelaar

Fusible 15 A / Zekering 15 A

achterkant

Aerial terminal

Black

Schwarz

Noir

Niet bij het apparaat inbegrepen.

Antennenanschlußklemme

Borne de l’antenne

Aansluitpunt antenne

Line out (see diagram

Schutz kappen

)

To metallic body or chassis of the car

Zwart

Zur metallenen Karosserie oder zum Fahrwerk des Autos

Vers corps métallique ou châssis de la voiture

Naar metalen ondergrond of chassis van de auto

Signalausgang

(siehe Schaltplan

Sortie de ligne

)

Yellow*¹

(voir le diagramme

Uitgang (zie schema

)

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch)

Zur einer stromführenden Anschlußklemme im Sicherungsblock zum

Anschließen an die Autobatterie (Umgehen des Zündschalters)

A une borne sous tension du porte-fusible connectée à la batterie de la

voiture (en dérivant l’interrupteur d’allumage)

Gelb*¹

Jaune*¹

Geel *¹

To aerial

Zur Antenne

A l’antenne

Naar de antenne

Naar een onder spanning staande aansluitklem in het zekeringblok die is

aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)

Fuse block

Sicherungsblock

Porte-fusible

Red

Rot

Rouge

Rood

To an accessory terminal in the fuse block

Zur einer Zubehöranschlußklemme im Sicherungsblock

Vers borne accessoire du porte-fusible

Zekeringblok

*1 : Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

*1 : Vor der Überprüfung der Funktionsfähigkeit des Geräts

vor dem Einbau, muß diese Leitung angeschlossen

werden, da sonst die Stromversorgung nicht

eingeschaltet werden kann.

*1 : Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil ne

peut pas être mis sous tension.

*1 : Voordat u controleert of het apparaat werkt (alvorens het te

installeren), moet deze draad aangesloten zijn. Als dit niet het

geval is, kan de stroom niet worden ingeschakeld.

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

Naar een aansluitklem in het zekeringblok

To remote lead of other equipment or power aerial if any

Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig

Orange with white stripe

Orange mit weißem Streifen

Orange avec bande blanche

Oranje met witte streep

To car light control switch—Only for KD-SC800R

Zum Autolichtschalter—Nur für KD-SC800R

(ILLUMINATION)

A l’interrupteur d’éclairage de la voiture—Seulement pour le KD-SC800R

Naar de schakelaar voor de autoverlichting—Alleen voor de KD-SC800R

Brown

Braun

Marron

Bruin

To cellular phone system

Zur Moblitelephon

A un système de téléphone cellulaire

Naar het mobiele-telefoonsysteem

White with black stripe

Weiß mit schwarzem

Streifen

Blanc avec bande noire

Wit met zwarte streep

White

Weiß

Blanc

Wit

Gray with black stripe

Grau mit schwarzem

Streifen

Gris avec bande noire

Grijs met zwarte streep

Purple

Gray

Grau

Gris

Green with black stripe

Grün mit schwarzem

Streifen

Vert avec bande noire

Groen met zwarte streep

Green

Grün

Vert

Purple with black stripe

Lila mit schwarzem

Streifen

Violet avec bande noire

Paars met zwarte streep

Lila

Violet

Paars

Grijs

Groen

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

Rechter Lautsprecher (hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

PRECAUTIONS on power supply and

speaker connections:

• DO NOT connect the speaker leads of the power

cord to the car battery; otherwise, the unit will

be seriously damaged.

• Connect the black lead (ground), yellow lead (to car

battery, constant 12 V), and red lead (to an

accessory terminal) correctly.

• BEFORE connecting the speaker leads of the

power cord to the speakers, check the speaker

wiring in your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker wiring.

If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect

the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your

car, consult your car dealer.

VORSICHTSMASSREGELN beim

PRECAUTIONS sur l’alimentation et la

VOORZORGSMAATREGELEN bij het

verbinden van de stroomkabeldraad

Anschließen der Stromversorgung und

connexion des enceintes:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil

jaune (a la batterie de la voiture,12 V constant) et le

fil rouge (à la prise accessoire).

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage

des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2

ci-dessous, NE CONNECTEZ PAS l’appareil en

utiliscant ce câblage original des enceintes. Si

vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon

que vous puissiez connecter l’appareil aux

enceintes comme montré sur la Fig. 3.

Lautsprecher:

met de speakers:

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe Leitung

(zur Autobatterie, konstant 12 V) und die rote Leitung

(zur Zubehöranschlußklemme) richtig anschließen.

• VOR dem Anschließen der Lautsprecherleitungen

des Spannunsgversorgungskabels an die

Lautsprecher, die Lautsprecherverdrahtung in

Ihrem Auto überprüfen.

• Verbind de speakerdraden van de stroomkabel

NIET met de accu van de auto; als u dit wel doet,

zal het apparaat ernstige schade oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de accu

van de auto, constant 12 V) en de rode draad (naar de

aansluitklem van de accessoire) op de juiste wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel

met de speakers verbindt, moet u de bedrading van de

speakers in uw auto controleren.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1 en

Fig. 2, mag het apparaat NIET worden aangesloten

met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het

apparaat ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals staat

afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de

oorspronkelijke speakerbedrading in uw auto.

– Als u twijfels hebt over de speakerbedrading in uw

auto, moet u contact opnemen met uw autodealer.

– Ist die Lautsprecherverdrahtung wie unten in

„Fig. 1“ und „Fig. 2“ abgebildet, das Gerät

NICHT mit der Originalverdrahtung der

Lautsprecher anschließen, da sonst das Gerät

schwer beschädigt wird.

Die Lautsprecherverdrahtung erneuern, so daß

Sie das Gerät an den Lautsprechern wie in

„Fig. 3“ abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem Auto

wie in „Fig. 3“ abgebildet, können Sie das Gerät

mit der Originalverdrahtung der Lautsprecher in

Ihrem Auto anschließen.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

– Si vous n’êtes pas sûrs du câblage d’enceintes de

votre voiture, consulter le concessionnaire de

votre voiture.

– Sind Sie sich über die Lautsprecherverdrahtung

in Ihrem Auto nicht sicher, wenden Sie sich an

Ihren Autohändler.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT

VERWENDETEN Leitungen mit Isolierklebeband umwickeln.

• Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS UTILISÉS

avec de la bande isolante.

Twist the core wires when connecting.

Die Kerndrähte beim Anschließen verdrehen.

Torsader les âmes des fils en les raccordant.

Draai de kerndraden om elkaar heen

Solder the core wires to connect them securely.

Die Kerndrähte anlöten, um sie fest

anzuschließen.

Souder les âmes des fils pour les raccorder entre

eux de façon sûre.

wanneer u ze wilt aansluiten.

• Om kortsluiting te voorkomen, moet u de aansluitklemmen van ONGEBRUIKTE gekleurde

draden met isolatieband bedekken.

Soldeer de kerndraden zodat ze stevig vast zitten.

Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

You can connect an amplifier and other equipment to Sie können einen Verstärker oder ein anderes Gerät

upgrade your car stereo system. anschließen, um Ihre Autostereoanlage zu erweitern.

Vous pouvez connecter un amplificateur ou autre

appareil pour améliorer votre système autoradio.

• Connectez le fil de commande à distance (bleu

avec bande blanche) au fil de commande à

distance de l’autre appareil de façon qu’il puisse

être commandé via cet appareil.

• Raccorder les bornes de sortie ligne de cet appareil

aux bornes d’entrée ligne de l’amplificateur.

• Déconnectez les enceintes de cet appareil et

connectez-les à l’amplificateur. Laissez les fils

d’enceintes de cet appareil inutilisés. (Recouvrir

les extrémités de ces fils inutilisés avec de la

bande isolante comme montré ci-dessus.)

Het is mogelijk om uw autostereosysteem uit te breiden

met een versterker of andere apparatuur.

• Verbind de externe kabel (blauw met witte streep) met

de externe kabel van het andere apparatuur zodat deze

op afstand vanaf deze apparaat kan worden bediend.

• Verbind de uitgang van het apparaat met de ingang van

de versterker.

• Koppel de speakers van dit apparaat los en

verbind ze aan de versterker. Gebruik de

speakerdraden van dit apparaat niet. (Plak de

aansluitklemmen van deze speakerdraden met

isolatieband af zoals hierboven is afgebeeld.)

• Connect the remote lead (blue with white stripe) to • Schließen Sie das Fernbedienungskabel (blau mit

the remote lead of the other equipment so that it

can be controlled through this unit.

• Connect this unit’s line-out terminals to the

amplifier’s line-in terminals.

• Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused. (Cover the

terminals of these unused leads with insulating

tape, as illustrated above.)

weißem Streifen) an das Fernbedienungskabel des

anderen Geräts an, so daß es über dieses Gerät

gesteuert werden kann.

• Die Anschlußklemmen am Ausgang dieses Gerät

an den Anschlußklemmen des Eingangs des

Verstärkers anschließen.

• Die Lautsprecher von diesem Gerät abtrennen

und am Verstärker anschließen. Die

Lautsprecherleitungen dieses Geräts unbenutzt

lassen. (Die Anschlußklemmen dieser nicht

verwendeten Leitungen mit Isolierklebeband

umwickeln, siehe Abbidung oben.)

Amplifier / Verstärker / Amplificateur / Versterker

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

Y-connector (not supplied with this unit)

*2 : Firmly attach the ground wire to the metallic

body or to the chassis of the car—to the place

not coated with paint (if coated with paint,

remove the paint before attaching the wire).

Failure to do so may cause damage to the

unit.

Remote lead

Y-Anschluß (nicht mit diesem Gerät mitgeliefert)

Connecteur Y (non fourni avec cet appareil)

Y-connector (wordt niet bij dit apparaat geleverd)

Fernbedienungsleitung

Fil d’alimentation à distance

Externe kabel

INPUT

JVC Amplifier

JVC Verstärker

To power aerial if any

Zur Motorantenne, sofern

vorhanden

Vers l’antenne automatique, s’il y

en a une

JVC Amplificateur

JVC Versterker

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

*2 : Verbinden Sie den Erdungsleiter mit der

Signal cord

(not supplied with this unit)

Karosserie oder dem Rahmen des

Fahrzeugs. Die Kntaktstelle darf nicht lackiert

sein (sollte die Kontaktstelle lackiert sein,

entfernen Sie den Lack der Kontaktstelle,

bevor Sie den Leiter befestigen). Wenn der

Erdungsleiter nicht ordnungsgemäß

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

Naar de antenne (indien aanwezig)

OUT

LINE

INPUT

Front speakers

Vordere Lautsprecher

Enceintes avant

Voorspeakers

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

angeschlossen wird, kann dieses Gerät

beschädigt werden.

REAR FRONT

*2 : Attachez solidement le fil de mise à la masse

au châssis métallique de la voiture—à un

endroit qui n’est pas recouvert de peinture (s’il

est recouvert de peinture, enlevez d’abord la

peinture avant d’attacher le fil). L’appareil peut

être endommagé si cela n’est pas fait

correctement.

*2 : Bevestig de aardedraad goed met een metalen

onderdeel of het chassis van de auto—bevestig

op een niet-gelakt gedeelte (indien gelakt, schuur

dan af alvorens de draad te bevestigen). Het

toestel kan worden beschadigd indien de

aardedraad niet goed is aangesloten.

Front speakers

KD-SC800R

KD-S901R

Vordere Lautsprecher

Enceintes avant

Voorspeakers

Only for KD-SC800R / Nur für KD-SC800R / Seulement pour le KD-SC800R /

Alleen voor de KD-SC800R

You can connect another power amplifier for front speakers.

Sie können einen anderen Leistungsverstärker für die vorderen Lautsprecher anschließen.

Vous pouvez connecter un autre amplificateur de puissance pour les enceintes avant.

U kunt nog een eindversterker voor de voorspeakers aansluiten.

Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /

Verbinden met de stuurwiel-afstandsbediening

Only for KD-SC800R / Nur für KD-SC800R / Seulement pour le KD-SC800R / Alleen voor de KD-SC800R

OE remote adapter (not supplied)

Radio-Lenkrad-Fernbedienungsadaption

(nicht im Lieferumfang enthalten)

Adaptateur pour télécommande au volant

(non fourni)

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the

controller.

To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC

IN-CAR ENTERTAINMENT dealer for details.

Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver steuern.

Hierfür ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht im

Lieferumfang enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC Autoradiohändler.

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la

télécommande.

Steering wheel remote input

Eingang für Lenkradfernbedienung

Entrée de la télécommande de volant

Ingang stuurwiel-afstandsbediening

Adapter voor stuurwiel-afstandsbediening

(niet bijgeleverd)

Pour le faire, un adaptateur pour télécommande au volant (non fourni) correspondant à votre voiture est

nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Indien uw auto een stuurwiel-afstandsbediening (niet bijgeleverd) heeft, kunt u deze receiver met die afstandsbediening

bedienen.

Hiervoor heeft u echter een JVC adapter nodig die geschikt is voor de stuurwiel-afstandsbediening in uw auto. Raadpleeg

uw JVC car audio dealer voor details.

Steering wheel remote controller (equipped in the car)

Lenkradfernbedienung (im Fahrzeug installiert)

Télécommande de volant (installée dans la voiture)

Stuurwiel-afstandsbediening (in de auto)

KD-SC800R

Nokia 3330 User Manual
Nexstar VANTEC NST D100SU User Manual
Memorex MD5585 User Manual
La Crosse Technology WT 5720 User Manual
Kenwood CD Player DPF 3010 User Manual
Jwin JL K755 User Manual
Dualit Digital Filter Coffee Machine CM 475 User Manual
Craftsman 247799891 User Manual
Bunn H5E H5X User Manual
Black & Decker BCM1410BDC User Manual