CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-S871R/KD-S723R/KD-S721R
KD-S871R
FM
TP/PTY
¢
SEL
CD
4
DISP
AM
7
8
MO
9
10
11 RPT
12 RND
MODE
SCM
KD-S723R
FM
TP/PTY
¢
4
SEL
CD
DISP
AM
7
8
MO
9
10
11 RPT
12 RND
MODE
SCM
KD-S721R
COMPACT
FM
TP/PTY
¢
4
SEL
CD
DISP
AM
7
8
MO
9
10
11 RPT
12 RND
MODE
SCM
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
GET0065-001A
[E/EX]
Position And Reproduction Of Labels
Bottom panel of the main unit
CAUTION: Invisible laser ADVARSEL:Usynliglaser-
VARNING:Osynliglaser- VARO: Avattaessa jasuo-
radiationwhenopen and
stråling ved åbning, når strålning när dennadel jalukitus ohitettaessa olet
interlock failedordefeated. sikkerhedsafbrydereerude är öppnadochspärren är alttiina näkymättömälle
AVOID DIRECTEXPOSURE af funktion.Undgåudsæt- urkopplad. Betrakta ej lasersäteilylle. Älä katso
strålen.
(s)
TO BEAM.
(e)
telse for stråling.
(d)
säteeseen.
(f)
IMPORTANT FOR LASER PRODUCTS
Precautions:
Name/Rating plate
1.CLASS 1 LASER PRODUCT
2.CAUTION: Invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3.CAUTION: Do not open the top cover. There are no
user-serviceable parts inside. Leave all servicing to
qualified service personnel.
4.CAUTION: This CD player uses invisible laser
radiation and is equipped with safety switches to
prevent radiation emission when unloading CDs. It is
dangerous to defeat the safety switches.
Caution:
This product contains a laser component
of higher laser class than Class 1.
5.CAUTION: Use of controls, adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
How to reset your unit
Press and hold both the SEL (select) and
time for several seconds.
(standby/on/attenuator) buttons at the same
This will reset the built-in microcomputer.
(standby/on/attenuator)
SEL (select)
Notes:
• Your preset adjustments – such as preset channels or sound adjustments – will also be erased.
• If a CD is in the unit, it will eject when you reset the unit. Be careful not to drop the CD.
2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
How to use the number buttons................
2
3
SOUND ADJUSTMENTS .................. 20
Adjusting the sound ................................. 20
Using the sound control memory (SCM) .. 21
Storing your own sound adjustments ....... 22
LOCATION OF THE BUTTONS............
4
4
Control panel ...........................................
OTHER MAIN FUNCTIONS ............... 23
Setting the clock ...................................... 23
Changing the general settings (PSM) ...... 23
Selecting the color of the display window
BASIC OPERATIONS ......................
5
Turning on the power ................................
5
RADIO BASIC OPERATIONS .............
Listening to the radio ................................
Storing stations in memory .......................
Tuning in to a preset station .....................
6
6
8
9
(ONLY FOR KD-S871R) ........................ 25
Detaching the control panel...................... 26
USING THE REMOTE CONTROLLER
(ONLY FOR KD-S871R) ........................ 27
RDS OPERATIONS ........................ 10
What you can do with RDS....................... 10
Other convenient RDS functions and
Location of the buttons ............................. 28
MAINTENANCE ............................ 29
adjustments ........................................... 14
Handling CDs .......................................... 29
CD OPERATIONS .......................... 17
Playing a CD ............................................ 17
Locating a track or a particular portion
TROUBLESHOOTING...................... 30
SPECIFICATIONS .......................... 31
on a CD ................................................. 18
Selecting CD playback modes.................. 18
Prohibiting CD ejection ............................. 19
How to use the number buttons:
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
MODE
«
7
8
9
10
11
12
RND
MO
RPT
Time countdown indicator
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without
pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
BEFORE USE
*For safety....
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
3
LOCATION OF THE BUTTONS
Control panel
Display window
a
s
d
f
g
h j
k
l
/
z
x
2
3
5
6
7 8 9
p
1
4
FM
TP/PTY
CD
¢
SEL
SSM
4
AM
DISP
7
MO
9
10
11
12 RND
8
RPT
MODE
SCM
q
w e
r
t
y
u
i
o
;
1
(standby/on/attenuator) button
Display window
2 TP (traffic programme)/
PTY (programme type) button
3 SEL (select) button
4 Display window
5 Loading slot
6 AM button
7 CD button
8 0 (eject) button
9 FM button
p
a SCM (sound control memory) indicator
s CD source indicator
d FM band indicator (FM1, FM2, FM3)
f AM band indicator
g Tuner reception indicators
MO (monaural), ST (stereo)
h RND (random) indicator
j RPT (repeat) indicator
k RDS indicators
AF, REG, TP, PTY
l LOUD (loudness) indicator
/ CD–in indicator
z Main display
x Volume (or audio) level indicator
(for KD-S871R)
¢/4
buttons
•
Also functions as SSM buttons when pressed
together.
q +/– buttons
w DISP (display) button
e Remote sensor (only for KD-S871R)
r MO (monaural) button
t RPT (repeat) button
y RND (random) button
u Number buttons
Volume level indicator
(for KD-S723R and KD-S721R)
i MODE button
o SCM (sound control memory) button
;
(control panel release) button
4
BASIC OPERATIONS
FM
TP/PTY
CD
¢
SEL
SSM
4
AM
DISP
7
8
MO
9
10
11 RPT
12 RND
MODE
SCM
1
3
2
Turning on the power
Volume level appears.
1 Turn on the power.
Volume level indicator
(see page 25)
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
4 Adjust the sound as you want.
(See pages 20 – 22.)
2 Select the source.
To drop the volume in a moment
FM
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
CD
AM
To turn off the power
Press and hold
To operate the tuner (FM or AM),
see pages 6 – 16.
for more than one second.
To operate the CD,
Note:
see pages 17 – 19.
When you use this unit for the first time, set the built-in
clock correctly, see page 23.
3 Adjust the volume.
To increase the volume.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a disc
and adjust it as required during playback.
To decrease the volume.
5
RADIO BASIC OPERATIONS
FM
TP/PTY
SEL
CD
¢
SSM
4
AM
DISP
7
MO
9
10
11 RPT
12 RND
8
MODE
SCM
Listening to the radio
2 Start searching a station.
You can use either automatic searching or manual
searching to tune in to a particular station.
To search stations of higher
frequencies.
¢
4
Searching a station automatically:
Auto search
To search stations of lower
frequencies.
1 Select the band (FM1 – 3, AM).
FM
When a station is received, searching
stops.
CD
FM1
FM2
FM3
AM
To stop searching before a station is received,
press the same button you have pressed for
searching.
AM
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
6
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
Searching a station manually:
Manual search
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM – MW/LW) until
you release the button.
1 Select the band (FM1 – 3, AM).
FM
CD
When an FM stereo broadcast is hard to
receive:
FM1
FM2
FM3
AM
1 Press MODE to enter the functions mode while
listening to an FM stereo broadcast.
2 Press MO (monaural), while still in the functions
mode, so that the MO indicator lights up on the
display.
AM
Note:
Each time you press the button, the MO
indicator lights up and goes off alternately.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
MODE
MO
2 Press and hold
¢ or 4
until
“M (manual)” starts flashing on the
display.
MO
¢
4
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
Selected band appears.
3 Tune in to a station you want while“M”
is flashing.
To tune in to stations of
higher frequencies.
¢
4
To tune in to stations of
lower frequencies.
7
Manual preset
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
• Manual preset of both FM and AM stations
1 Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
FM
1 Select the FM band (FM1 – 3) you want
CD
FM1
FM2
FM3
to store FM stations into.
AM
FM
AM
CD
FM1
FM2
FM3
2 Tune in to a station (in this example,
AM
of 88.3 MHz).
To tune in to stations of
higher frequencies.
2 Press and hold both buttons for more
¢
than 2 seconds.
4
To tune in to stations of
lower frequencies.
¢
4
“SSM” appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
8
Tuning in to a preset station
3 Press and hold the number button (in
this example, 1) for more than 2
seconds.
You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on pages 8 and 9.
7
1 Select the band (FM1 – 3, AM).
FM
CD
FM1
FM2
FM3
“P1” flashes for a few seconds.
AM
AM
4 Repeat the above procedure to store
other stations into other preset
numbers.
2 Select the number (1 – 6) for the preset
Notes:
station you want.
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
7
8 MO
9
10
11 RPT
12 RND
9
RDS OPERATIONS
What you can do with RDS
To use Network-Tracking Reception
You can select the different modes of network-
tracking reception to continue listening to the
same programme in its finest reception.
RDS (Radio Data System) allows FM stations to
send an additional signal along with their regular
programme signals. For example, the stations send
their station names, as well as information about
what type of programme they broadcast, such as
sports or music, etc.
Another advantage of RDS function is called
“Enhanced Other Networks.” By using the
Enhanced Other Networks data sent from a station,
you can tune in to a different station of a different
network broadcasting your favourite programme or
traffic announcement while listening to another
programme or to another source such as CD.
When shipped from the factory, “AF” is selected.
• AF:
Network-Tracking Reception is
activated with Regionalization set to
“off.”
With this setting, the unit switches to
another station within the same
network when the receiving signals
from the current station become
weak. (In this mode, the programme
may differ from the one currently
received.)
The AF indicator lights up but the
REG indicator does not.
By receiving the RDS data, this unit can do the
following:
• Tracing the same programme automatically
(Network-Tracking Reception)
• Standby Reception of TA (Traffic Announcement)
or your favourite programme
• PTY (Programme Type) search
• Programme search
• AF REG: Network-Tracking Reception is
activated with Regionalization set to
“on.”
With this setting, the unit switches to
another station, within the same
network, broadcasting the same
programme when the receiving
signals from the current station
become weak.
• And some other functions
Tracing the same programme
automatically (Network-Tracking
Reception)
When driving in an area where FM reception is not
good, the tuner built in this unit automatically tunes
in to another RDS station, broadcasting the same
programme with stronger signals. So, you can
continue to listen to the same programme in its
finest reception, no matter where you drive.
(See the illustration on the next page.)
Both the AF indicator and the REG
indicator light up.
• OFF:
Network-Tracking Reception is
deactivated.
Neither the AF indicator nor the REG
indicator lights up.
AF indicator
REG indicator
AF REG
Two types of the RDS data are used to make
Network-Tracking Reception work correctly — PI
(Programme Identification) and AF (Alternative
Frequency).
Without receiving these data correctly from the RDS
station you are listening to, Network-Tracking
Reception will not operate.
10
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from the
current source (another FM station or CD).
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 24.)
• TA Standby Reception will not work if you are listening
to an AM station.
SEL
TP/PTY
2 Select “AF-REG (alternative
frequency/regionalization
reception)” if not shown on the
display.
Press TP/PTY to activate TA Standby Reception.
7 When the current source is FM, the TP indicator
either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
¢
4
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically tunes in to
the station. The volume changes to the
preset TA volume level (see page 15) and
the traffic announcement can be heard.
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
3 Select the desired mode – “AF,”
“AF REG” or “OFF.”
signals. Press
for such a station.
¢ or 4
to search
4 Finish the setting.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
SEL
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency E
To deactivate the TA Standby Reception, press
TP/PTY again.
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency C
Programme 1
broadcasting
on frequency D
11
Using PTY Standby Reception
4 Finish the setting.
PTY Standby Reception allows the unit to switch
temporarily to your favourite programme (PTY:
Programme Type) from the current source (another
FM station or CD).
SEL
• PTY Standby Reception will not work if you are
listening to an AM station.
7 When the current source is FM, the PTY
indicator either lights up or flashes.
• If the PTY indicator lights up, PTY
Standby Reception is activated.
You can select your favourite programme type for
PTY Standby Reception.
If a station starts broadcasting the
selected PTY programme, this unit
automatically tunes in to the station.
• If the PTY indicator flashes, PTY
Standby Reception is not yet activated
since the station being received does
not provide the signals used for PTY
Standby Reception.
When shipped from the factory, PTY Standby
Reception is turned off. (“OFF” is selected for PTY
Standby Reception.)
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 24.)
To activate PTY Standby Reception,
you need to tune in to another station
SEL
providing these signals. Press
or 4 to search for such a station.
¢
When a station providing these signals
is tuned in, the PTY indicator stops
flashing and remains lit. Now PTY
Standby Reception is activated.
2 Select “PTY STBY (standby)” if not
shown on the display.
7 When the current source is other than
FM, the PTY indicator lights up.
If a station starts broadcasting the
selected PTY programme, this unit
automatically changes the source and
tunes in to the station.
¢
4
To deactivate the PTY Standby Reception,
select “OFF” in step 3 on the left column. The
PTY indicator disappears.
3 Select one of the twenty-nine PTY
codes. (See page 16.)
Selected code name
appears on the display
and is stored into
memory.
• To cancel the PTY
Standby Reception,
select “OFF.”
12
Searching your favourite programme
2 Select one of the twenty-nine PTY
codes. (See page 16.)
You can search any one of the PTY codes.
In addition, you can store your 6 favourite
programme types in the number buttons.
When shipped from the factory, the following 6
programme types have been stored in the number
buttons (1 to 6).
Selected code name
appears on the display.
To store your favourite programme types, see
below.
To search your favourite programme type, see
page 14.
3 Press and hold the number button for
more than 2 seconds to store the PTY
code selected into the preset number
you want.
3
1
2
POP M
ROCK M
EASY M
6
4
5
7
8 MO
9
10
11 RPT
12 RND
CLASSICS
AFFAIRS
VARIED
To store your favourite programme types
1 Press and hold TP/PTY for more than
“MEMORY” and the selected code name
alternates on the display.
2 seconds.
TP/PTY
4 Press and hold TP/PTY for more than
2 seconds.
TP/PTY
The last selected PTY code appears.
13
To search your favourite programme type
Other convenient RDS functions
and adjustments
1 Press and hold TP/PTY for more than
2 seconds while listening to an FM
station.
Automatic selection of the station
when using the number buttons
TP/PTY
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS station,
something different will happen. If the signals from
that preset station are not sufficient for good
reception, this unit, using the AF data, tunes in to
another frequency broadcasting the same
programme as the original preset station is
broadcasting. (Programme search)
The last selected PTY code appears.
2 Select one of the PTY codes.
• The unit takes some time to tune in to another
station using Programme search.
7
8 MO
9
10
11 RPT
12 RND
To activate Programme search, follow the procedure
below.
• See also “Changing the general settings (PSM)”
on pages 23 and 24.
OR
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press
“P(Programme)-SEARCH.”
¢ or 4
to select
3 Press + to select “ON.”
Now Programme search is activated.
4 Press SEL (select) to finish the setting.
To cancel Programme search, repeat the
same procedure and select “OFF” in step 3 by
pressing –.
Ex.: When “ROCK M” is selected
3 Press
¢ or 4
to start PTY
search for your favourite programme.
¢
4
• If there is a station broadcasting a programme of
the same PTY code as you selected, that station
is tuned in.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
14
Changing the display mode while
listening to an FM station
You can change the initial indication on the display
to station name (PS NAME), station frequency
(FREQ) or clock time (CLOCK) while listening to
an FM RDS station.
Setting the TA volume level
You can preset the volume level for TA Standby
Reception. When a traffic programme is received,
the volume level automatically changes to the preset
level.
• See also “Changing the general settings (PSM)”
on pages 23 and 24.
• See also “Changing the general settings (PSM)”
on pages 23 and 24.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press
(volume).”
¢ or 4
to select “TA VOL
2 Press
(display mode).”
¢ or 4
to select “DISPMODE
3 Press + or – to set to the desired volume.
You can set it from “VOL 00” to “VOL 50.”
4 Press SEL (select) to finish the setting.
3 Press + or – to set to the desired indication (“PS
NAME,” “FREQ” or “CLOCK”).
4 Press SEL (select) to finish the setting.
Automatic clock adjustment
Note:
By pressing DISP (display), you can change the display
while listening to an FM RDS station.
Each time you press the button, the following information
appears on the display:
When shipped from the factory, the clock built in
this unit is set to be readjusted automatically using
the CT (Clock Time) data in the RDS signal.
If you do not want to use automatic clock
adjustment, follow the procedure below.
• See also “Changing the general settings (PSM)”
on pages 23 and 24.
Station name
(PS NAME)
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
Station frequency
(FREQ)
2 Press
(adjustment).”
3 Press – to select “OFF.”
¢ or 4
to select “AUTO ADJ
Programme type
(PTY)
Now automatic clock adjustment is canceled.
4 Press SEL (select) to finish the setting.
Clock
To reactivate clock adjustment, repeat the same
procedure and select “ON” in step 3 by pressing +.
Note:
• Then, the display goes back to the original indication
You must stay tuned to the same station for more than 2
minutes after setting “AUTO ADJ” to “ON.” Otherwise,
the clock time will not be adjusted. (This is because the
unit takes up to 2 minutes to capture the CT data in the
RDS signal.)
in several seconds.
15
PTY codes
NEWS:
AFFAIRS:
News
CHILDREN: Entertainment programmes for
children
Topical programmes expanding
on current news or affairs
Programmes which impart advice
on a wide variety of topics
Sport events
SOCIAL:
Programmes on social activities
INFO:
RELIGION: Programmes dealing with any
aspect of belief or faith, or the
SPORT:
nature of existence or ethics
EDUCATE: Educational programmes
DRAMA: Radio plays
PHONE IN: Programmes where people can
express their views either by
CULTURE: Programmes on national or
regional culture
phone or in a public forum
TRAVEL:
LEISURE:
JAZZ:
Programmes about travel
destinations, package tours, and
travel ideas and opportunities
Programmes concerned with
recreational activities such as
gardening, cooking, fishing, etc.
Jazz music
SCIENCE:
Programmes on natural science
and technology
VARIED:
Other programmes like comedies
or ceremonies
POP M:
Pop music
ROCK M:
EASY M:
LIGHT M:
Rock music
Easy-listening music
Light music
COUNTRY: Country music
NATION M: Current popular music from
another nation or region, in that
country’s language
Classic pop music
Folk music
DOCUMENT: Programmes dealing with factual
matters, presented in an
CLASSICS: Classical music
OTHER M: Other music
WEATHER: Weather information
FINANCE: Reports on commerce, trading,
the Stock Market, etc.
OLDIES:
FOLK M:
investigative style
16
CD OPERATIONS
FM
TP/PTY
CD
¢
SEL
SSM
4
AM
DISP
7
MO
9
10
11 RPT
12 RND
8
MODE
SCM
Note:
Playing a CD
When a CD is inserted upside down, “EJECT”
appears on the display and the CD automatically
ejects.
1 Insert a disc into the loading slot.
The unit turns on,
draws the CD and
starts playback
automatically.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects
from the loading slot. The source changes to the
tuner (you will hear the last received station.)
If you change the source to AM or FM, CD play
also stops (without ejecting the CD this time).
Note on One-Touch Operation:
When a CD is already in the loading slot,
pressing the CD button turns on the unit and
starts playback automatically.
Notes:
The CD–in indicator flashes.
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)
• You can eject the CD even when the unit is turned
off.
The CD–in indicator lights up.
Total playing time of Total track number
the inserted disc
of the inserted disc
Elapsed playing time
Current track
17
Locating a track or a particular Selecting CD playback modes
portion on a CD
To play back tracks at random
(Random Play)
1 Press MODE to enter the functions mode while
playing a CD. This unit enters the functions
To fast-forward or reverse the track
Press and hold
playing a CD, to fast-forward the
track.
¢, while
mode.
¢
4
2 Press RND (random), while still in the functions
mode, so that the RND indicator lights up on
the display.
Then, each time you press the button, CD
random play mode turns on and off alternately.
Press and hold 4
playing a CD, to reverse the
track.
, while
12
RND
MODE
To go to the next tracks or the previous
tracks
Press
¢ briefly, while
playing a CD, to go ahead to the
beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
¢
4
The RND indicator
When the random mode is turned on, the RND
indicator lights up on the display and a track
randomly selected starts playing.
Press 4
briefly, while
playing a CD, to go back to the
beginning of the current track.
Each time you press the button
consecutively, the beginning of
the previous tracks is located
and played back.
To go to a particular track directly
7
8 MO
9
10
11 RPT
12 RND
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
18
To play back tracks repeatedly
(Repeat Play)
Prohibiting CD ejection
You can prohibit CD ejection and can lock a CD
in the loading slot.
1 Press MODE to enter the functions mode while
playing a CD. This unit enters the functions
mode.
2 Press RPT (repeat), while still in the functions
mode, so that the RPT indicator lights up on
the display.
While pressing CD, press and hold 0 for
more than 2 seconds.
Then, each time you press the button, CD
repeat play mode turns on and off alternately.
CD
11
RPT
MODE
The RPT indicator
“EJECT” flashes on the display for about 5
seconds, and the CD is locked and cannot be
ejected.
Track number of the
currently playing track
To cancel the prohibition and unlock the CD,
press 0 again for more than 2 seconds, while
pressing CD.
When the repeat mode is turned on, the RPT
indicator lights up on the display.
“EJECT” appears on the display, and the CD
ejects from the loading slot.
19
SOUND ADJUSTMENTS
2 Adjust the level.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
To increase the level.
1 Select the item you want to adjust.
Each time you press the
To decrease the level.
button, the adjustable items
change as follows:
SEL
BAS
TRE
FAD
(bass)
(treble)
(fader)
VOL
LOUD
BAL
(volume)
(loudness)
(balance)
Note:
Normally, the + and – buttons work as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
Indication
To do:
Range
BAS
TRE
FAD*
BAL
Adjust the bass.
–06 (min.)
|
+06 (max.)
Adjust the treble.
–06 (min.)
|
+06 (max.)
Adjust the front
and rear speaker
balance.
R06 (Rear only)
|
F06 (Front only)
Adjust the left
and right speaker
balance.
L06 (Left only)
|
R06 (Right only)
LOUD
Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
LOUD ON
|
LOUD OFF
VOL
Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
20
Indication
For:
Preset values
Using the sound control memory
(SCM)
BAS
TRE
LOUD
SCM OFF (Flat sound) 00
00
ON
BEAT
SOFT
Rock or
disco music
+02
+01
00
ON
You can select and store a preset sound
adjustment suitable for each playback source
(Advanced SCM).
Quiet
background
music
–03
+01
OFF
OFF
Selecting and storing the sound modes
POP
Light music +04
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources – FM1, FM2, FM3, AM, and CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see “To cancel Advanced SCM – SCM LINK” on
page 25.
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,”
select the source.
FM
CD
Select the sound mode you want.
Each time you change the
playback source, the SCM
AM
SCM
indicator flashes on the display.
Ex.: When you select “BEAT”
The sound mode stored in memory for the
selected source is recalled.
Each time you press the button, the sound mode
changes as follows:
Notes:
SOFT
SCM OFF
BEAT
POP
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on page 22.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
page 20. (Your adjustments will be canceled if
another source is selected.)
• When “SCM LINK” is set to “LINK ON” (see page
25), the selected sound mode can be stored in
memory for the current source and the effect
applies only to the current source.
• When “SCM LINK” is set to “LINK OFF,” the
selected sound mode effect applies to any source.
21
Storing your own sound
adjustments
3 Adjust the bass or treble, or turn the
loudness function ON/OFF.
• See page 20 for details.
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1 Call up the sound mode you want to
adjust.
• See “Using the sound control memory
(SCM)” on page 21 for details.
SCM
4 Repeat steps 2 and 3 to adjust the
other items.
5 Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Ex.: When you select “SOFT”
SCM
2 Select “BAS (bass)”, “TRE (treble)” or
“LOUD (loudness)”.
SEL
Your adjustment made for the selected
sound mode is stored in memory.
6 Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 21.
22
OTHER MAIN FUNCTIONS
Setting the clock
5 Finish the setting.
You can also set the clock system to either 24 hours
or 12 hours.
SEL
1 Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
To check the current clock time (changing
the display mode)
Press DISP (display) repeatedly. Each time you
press the button, the display mode changes as
follows:
SEL
• During tuner operation:
Frequency
Clock
Note:
2 Set the hour.
For the indication change during RDS operation,
see page 15.
1 Select “CLOCK H (hour)” if not shown on
the display.
2 Adjust the hour.
• During CD operation:
1
2
Elapsed playing time
Clock
• During power off
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
¢
4
Changing the general settings
(PSM)
3 Set the minute.
1 Select “CLOCK M (minute).”
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
2 Adjust the minute.
1
2
Basic Procedure
¢
4
1 Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
4 Set the clock system.
1 Select “24H/12H.”
SEL
2 Select “24H” or “12H.”
1
2
2 Select the PSM item you want to
adjust. (See page 24.)
¢
4
¢
4
CONTINUED ON THE NEXT PAGE
23
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the setting.
SEL
Preferred Setting Mode (PSM) items
1
2
3
¢
4
SEL
Factory-preset See
Set.
settings
page
Hold.
Select.
–
+
CLOCK H
CLOCK M
SCM LINK
Hour adjustment
Minute adjustment
Back
Back
Advance
Advance
0:00
23
Sound control
memory linkage
LINK OFF
12H
LINK ON
24H
LINK ON
24H
21, 25
23
24H/12H
24/12-hour time
display
AUTO ADJ
DISPMODE
Automatic clock
setting
OFF
ON
ON
PS NAME
AF
15
15
10
Display mode
CLOCK
PS NAME
FREQ
AF-REG
Alternate frequency/
Regionalization
reception
AF
AF REG
OFF
29 programme types
(see page 16)
OFF
PTY STBY
TA VOL
PTY standby
OFF
12
Traffic announcement
volume
VOL 00 – VOL 50
VOL 20
OFF
15
14
P-SEARCH
LEVEL
Programme search
Level display
OFF
ON
For KD-S871R:
AUDIO 2
AUDIO 1
AUDIO 2
25
OFF
For KD-S723R and KD-S721R:
VOL1
VOL 2
VOL2
OFF
25
25
OFF
OFF
MUTING 2
MUTING 1
TEL
Telephone muting
•
Press SEL (select) to finish the setting.
24
To cancel Advanced SCM – SCM LINK
Selecting the color of the
display window
You can cancel theAdvanced SCM (Sound Control
Memory), and unlink the sound modes and the
playback sources.
This section is only for KD-S871R.
When shipped from the factory, a different sound
mode can be stored in memory for each source so
that you can change the sound modes simply by
changing the sources.
You can select the color of the display window
according to your preference.
When shipped from the factory, “ALL DEMO” is
selected.
• ALL DEMO: The color changes every 30
seconds.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
• SOURCE:
The color changes according to the
source you choose (FM, CD or
AM).
• BLUE 1:
• BLUE 2:
Blue color 1.
Blue color 2.
• PURPLE 1: Purple color 1.
• PURPLE 2: Purple color 2.
To select the level meter – LEVEL
You can select the level display according to your
preference.
• RED 1:
• RED 2:
Red color 1.
Red color 2.
For KD-S871R
When shipped from the factory, “AUDIO 2” is
selected.
1 Press and hold DISP (display) for
more than 2 seconds so that one of
the colors listed above appears on
the display.
• AUDIO 1: Level meter illuminates.
• AUDIO 2: Alternates level meter and
illumination display.
DISP
• OFF:
Erases the audio level indicator.
For KD-S723R and KD-S721R
When shipped from the factory, “VOL2” is selected.
2 Select the color you want to adjust.
• VOL1:
• VOL2:
Shows the volume level indicator.
Alternates “VOL1” setting and
illumination display.
¢
4
• OFF:
Erases the volume level indicator.
To select the telephone muting – TEL
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either “MUTING 1” or “MUTING 2,” whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
3 Finish the setting.
DISP
• MUTING 1: Select this if this setting can mute
the sounds.
• MUTING 2: Select this if this setting can mute
the sounds.
• OFF:
Cancels the telephone muting.
25
Attaching the control panel
Detaching the control panel
1 Insert the left side of the control panel
You can detach the contol panel when leaving the
car.
into the groove on the panel holder.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel holder.
Detaching the control panel
Before detaching the control panel, be sure to turn
off the power.
1 Unlock the control panel.
2 Press the right side of the control
panel to fix it to the panel holder.
2 Lift and pull the control panel out of
the unit.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
3 Put the detached control panel into the
provided case.
Connectors
26
USING THE REMOTE CONTROLLER
This section is only for KD-S871R.
2. Place the battery.
Slide the battery into the holder with the + side
facing upwards so that the battery is fixed in
This unit can be remotely controlled as instructed
here (with an optionally purchased remote
controller.) We recommend that you use remote
controller RM-RK31 or RM-RK50 with your unit.
the holder.
Lithium coin battery
(product number:
CR2025)
(Ex.: When you are using RM-RK31)
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
3. Return the battery holder.
Insert again the battery holder pushing it until
you hear a clicking sound.
(back side)
TP/PTY
SEL
DISP
7
8
MO
9
Remote sensor
WARNING:
• Store the battery in a place where children cannot
reach.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting.)
If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble or heat the
battery or dispose it in a fire.
Doing any of these things may cause the battery to
give off heat, crack or start a fire.
• Do not leave the battery with other metallic
materials.
Installing the battery
When the controllable range or effectiveness of the
remote controller decreases, replace the battery.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point
pen or a similar tool.
Doing this may cause the battery to give off heat,
crack or start a fire.
• When throwing away or saving the battery, wrap it
in tape and insulate; otherwise, the battery may
start to give off heat, crack or start a fire.
• Do not poke the battery with tweezers or similar
tools.
2) Remove the battery holder.
(back side)
Doing this may cause the battery to give off heat,
crack or start a fire.
1)
2)
CAUTION:
DO NOT leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.
27
3 • Functions as the PRESET button while
listening to the radio.
Location of the buttons
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
RM-RK31
• Does not function as the DISC – button.
4 Functions the same as the + and – buttons on
the main unit.
NOTE: This button does not function for the
preferred setting mode adjustment.
5 Selects the sound mode.
Each time you press the button, the mode
changes.
6 Selects the source.
5
6
1
2
3
7
Each time you press the button, the source
changes.
4
7 • Searches stations while listening to the radio.
• Fast-forwards or reverses the track if pressed
and held while listening to a CD.
• Skips to the beginning of the next track or goes
back to the beginning of the current (or
previous tracks) if pressed briefly while
listening to a CD.
1 • Turns on the unit if pressed when the unit is
turned off.
• Turns off the unit if pressed and held for more
than 1 second.
• Drops the volume level in a moment if pressed
briefly.
Press again to resume the volume.
2 • Functions as the BAND button while listening
to the radio.
Each time you press the button, the band
changes.
• Does not function as the PROG/DISC +
button.
28
MAINTENANCE
Moisture condensation
Handling CDs
Moisture may condense on the lens inside the
CD player in the following cases:
This unit has been designed to reproduce CDs
and CD-Rs.
• Other discs cannot be played back.
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the CD and leave
the unit turned on for a few hours until the
moisture evaporates.
How to handle CDs
When removing a CD from
its case, press down the
Center holder
center holder of the case
and lift the CD out,
holding it by the edges.
• Always hold the CD by
the edges. Do not touch its recording surface.
When playing a CD-R (Recordable)
You can play back your original CD-Rs on this
receiver.
• Before playing back CD-Rs, read their
instructions or cautions carefully.
• Some CD-Rs recorded on CD recorders may
not be played back on this receiver because of
their disc characteristics, and of the following
reasons:
When storing a CD into its case, gently insert the
CD around the center holder (with the printed
surface facing up).
• Make sure to store CDs into the cases after
use.
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the CD player is dirty.
• Use only “finalized” CD-Rs.
• CD-RWs (Rewritable) cannot be played back
on this receiver.
• Do not use CD-Rs with stickers or sticking
labels on the surface. They may cause
malfunctions.
To keep CDs clean
A dirty CD may not play
correctly. If a CD does
become dirty, wipe it with a
soft cloth in a straight line
from center to edge.
To play new CDs
New CDs may have some
rough spots around the
inner and outer edges. If
such a CD is used, this unit
may reject the CD.
To remove these rough
spots, rub the edges with a
pencil or ball-point pen, etc.
CAUTIONS:
• Do not insert 8 cm CDs (single CDs) into the
loading slot. (Such CDs cannot be ejected.)
• Do not insert any CD of unusual shape — like a
heart or flower; otherwise, it will cause a
malfunction.
• Do not expose CDs to direct sunlight or any heat
source or place them in a place subject to high
temperature and humidity. Do not leave them in
a car.
About mistracking:
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean CDs.
Mistracking may result from driving on extremely
rough roads. This does not damage the unit and
the CD, but will be annoying.
We recommend that you stop CD play while
driving on such rough roads.
29
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• CD cannot be played back.
CD is inserted upside down.
Insert the CD correctly.
Stop playing CD while driving on
rough roads.
• CD sound is sometimes
interrupted.
You are driving on rough roads.
Change the disc.
The disc is scratched.
Check the cords and
connections.
Connections are incorrect.
Check the cords and
connections.
• Sound is sometimes
interrupted.
Connections are incorrect.
Adjust it to the optimum level.
• Sound cannot be heard from
the speakers.
The volume is turned to the
minimum level.
Check the cords and
connections.
Connections are incorrect.
Store stations manually.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Signals are too weak.
Connect the antenna firmly.
Insert a CD correctly.
• Static noise while listening to
the radio.
The antenna is not connected
firmly.
• “NO DISC” appears on the
display.
No CD is inserted.
• CD cannot be ejected.
CD is locked.
Unlock the CD (see page 19).
• CD can neither be played
back nor ejected.
The unit may function
incorrectly.
Press and hold both
and 0 at the same time for
several seconds. Be careful not
to drop the CD when it is
ejected.
• This unit does not work at all.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Press and hold both SEL and
at the same time for
several seconds to reset the
unit. (The clock setting and
preset stations stored in
memory are erased.)
(See page 2.)
30
SPECIFICATIONS
CD PLAYER SECTION
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Type: Compact disc player
Front:
Rear:
45 W per channel
45 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Front:
17 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
17 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
Rear:
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
GENERAL
Power Requirement:
Tone Control Range:
Bass:
±10 dB at 100 Hz
Operating Voltage: DC 14.4 V
Treble: ±10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
(11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W × H × D):
Installation Size: 182 mm × 52 mm × 150 mm
Panel Size: 188 mm × 58 mm × 14 mm
Mass: 1.3 kg (excluding accessories)
TUNER SECTION
Frequency Range:
FM:
AM:
87.5 MHz to 108.0 MHz
(MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
Design and specifications subject to change without
notice.
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
31
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gerät zurück
Siehe Seite Zurücksetzen des Geräts
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
Hebt u PROBLEMEN met de bediening?
Stel het apparaat terug
Zie de pagina met de paragraaf Het apparaat terugstellen
VICTOR COMPANY OF JAPAN, LIMITED
EN, GE, FR, NL
1201KKSMDTJEIN
J
C
V
|