JVC KD S620 User Manual

CD RECEIVER  
KD-S620/S570  
KD-S620/S570  
KD-S620/S570  
RECEPTOR CON CD  
RECEPTEUR CD  
KD-S620  
KD-S570  
KD-S620  
31  
KD-S570  
COMPACT  
DIGITAL AUDIO  
For installation and connections, refer to the separate manual.  
Para la instalación y las conexiones, refiérase al manual separado.  
Pour l’installation et les raccordements, se référer au manuel séparé.  
For customer Use:  
Enter below the Model No. and  
Serial No. which are located on  
the top or bottom of the cabinet.  
Retain this information for future  
reference.  
INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL D’INSTRUCTIONS  
Model No.  
Serial No.  
GET0003-001A  
[J]  
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to  
ensure your complete understanding and to obtain the best possible performance from the unit.  
CONTENTS  
How to reset your unit .......................................................................... 2  
BASIC OPERATIONS....................................................4  
RADIO OPERATIONS...................................................5  
Listening to the radio ..................................................................... 5  
Storing stations in memory ............................................................ 6  
FM station automatic preset: SSM ............................................... 6  
Manual preset.............................................................................. 7  
Tuning into a preset station ........................................................... 8  
Other convenient tuner functions ................................................. 9  
Scanning broadcast stations ........................................................9  
Selecting FM reception sound......................................................9  
CD OPERATIONS.......................................................10  
Playing a CD ................................................................................. 10  
Locating a track or a particular portion on a CD ..................... 11  
Selecting CD playback modes...................................................... 12  
Other convenient CD functions ................................................... 12  
Prohibiting CD ejection.............................................................. 12  
SOUND ADJUSTMENTS .............................................13  
Adjusting the sound...................................................................... 13  
Turning on/off the loudness function ............................................... 14  
Using the Sound Control Memory .............................................. 15  
Selecting and storing the sound modes ..................................... 15  
Recalling the sound modes ........................................................16  
Canceling Advanced SCM ........................................................... 17  
Storing your own sound adjustments ......................................... 18  
OTHER MAIN FUNCTIONS .........................................19  
Setting the clock ............................................................................ 19  
Selecting the level display ............................................................ 20  
Detaching the control panel ......................................................... 21  
REMOTE OPERATIONS (ONLY FOR KD-S620)............. 22  
Installing the battery .................................................................... 22  
Using the remote controller ......................................................... 23  
MAINTENANCE.........................................................24  
Handling CDs ................................................................................ 24  
TROUBLESHOOTING .................................................25  
SPECIFICATIONS .......................................................26  
3
BASIC OPERATIONS  
1
2
Note:  
When you use this unit for the  
first time, set the built-in  
clock correctly, see page 19.  
3
1
Turn on the power.  
/I/ATT  
Note on One-Touch Operation:  
When you select a source in step 2 below, the power automatically comes on.  
You do not have to press this button to turn on the power.  
2
3
C D  
Select the source.  
F M  
To operate the tuner, see pages 5 – 9.  
To operate the CD player, see pages 10 – 12.  
A M  
Adjust the volume.  
Volume level appears  
Volume level indicator  
4
Adjust the sound as you want (see pages 13 – 18).  
To drop the volume in a moment  
Press  
briefly while listening to any source. “ATT” starts flashing on the display, and  
the volume level will drop in a moment.  
To resume the previous volume level, press the button briefly again.  
To turn off the power  
Press  
for more than 1 second.  
4
RADIO OPERATIONS  
Listening to the radio  
1
2
1
Select the band (FM1, FM2, FM3 or AM).  
You can select any one of FM1, FM2 and FM3 to listen to an  
FM station.  
F M  
selected band appears  
A M  
FM1  
FM2  
AM  
FM3  
Volume level indicator  
2
To search stations  
of higher  
frequencies.  
Start searching a station.  
When a station is received, searching stops.  
To search stations  
of lower  
frequencies.  
To stop searching before a station is received, press the same button you have pressed  
for searching.  
To tune in a particular frequency without searching:  
1 Press FM or AM to select the band.  
2 Press and hold  
Now you can manually change the frequency while “M” is flashing.  
3 Press ¢ or 4 repeatedly until the frequency you want is reached.  
• If you hold down the button, the frequency keeps changing until you release the button.  
¢ or 4  
until “M” starts flashing on the display.  
5
Storing stations in memory  
You can use one of the following two methods to store broadcasting stations in memory.  
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)  
• Manual preset of both FM and AM stations  
FM station automatic preset: SSM  
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).  
1
2
1
FM1  
FM2  
FM3  
F M  
Select the FM band number (FM1, FM2 or  
FM3) you want to store FM stations into.  
2
Press and hold the both buttons for more than  
2 seconds.  
“SSM” appears, then disappears when  
automatic preset is over.  
Local FM stations with the strongest signals are searched and stored automatically in the  
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number  
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).  
When automatic preset is over, the station stored in number button 1 will be automatically  
tuned in.  
6
Manual preset  
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.  
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band  
1
2
3
1
Select the FM1 band.  
F M  
2
Tune into a station of 88.3 MHz.  
See page 5 to tune into a station.  
3
Press and hold the button for more than 2  
seconds.  
“P1” flashes for a few seconds.  
4
Repeat the above procedure to store other stations into other  
preset numbers.  
Notes:  
• A previously preset station is erased when a new station is stored in the same preset number.  
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,  
during battery replacement). If this occurs, preset the stations again.  
7
Tuning into a preset station  
You can easily tune into a preset station.  
Remember that you must store stations first. If you have not stored them yet, see pages 6  
and 7.  
1
2
1
Select the band (FM1, FM2, FM3 or AM) you  
F M  
want.  
A M  
FM1  
FM3  
FM2  
AM  
2
Select the number (1 – 6) for the preset station  
you want.  
8
Other convenient tuner functions  
MO/RND  
RPT/SCAN  
Scanning broadcast stations  
When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a  
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes  
on the display), and you can check what program is now being broadcasted.  
If you want to listen to that program, press the same button again to stop scanning.  
Selecting FM reception sound  
When an FM stereo broadcast is hard to receive:  
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you  
hear becomes monaural but reception will be improved.  
A
Lights up when receiving an FM broadcast in stereo.  
To restore the stereo effect, press the same button again.  
9
CD OPERATIONS  
Playing a CD  
0
1
1
Insert a disc into the loading slot.  
The unit turns on, draws a CD and starts playback  
automatically.  
• When a CD is inserted upside down, “EJECT” appears on  
the display and the CD automatically ejects.  
A
A
Total playing time of  
the inserted disc  
Total track number  
of the inserted disc  
Elapsed playing  
time  
Current track  
Note on One-Touch Operation:  
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback  
automatically.  
CAUTION on Volume Setting  
CDs produces very little noise compared with other sources. If the volume level is adjusted  
for the tuner, for example, the speakers may be damaged by the sudden increase in the  
output level. Therefore, lower the volume before playing a CD and adjust it as required  
during playback.  
To stop play and eject the CD  
Press 0.  
CD play stops and the CD automatically ejects from the loading slot. The source changes to  
the tuner (you will hear the last received station).  
If you change the source to AM/FM, the CD play also stops (without ejecting the CD this  
time).  
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into  
the loading slot to protect it from dust. (CD play will not start this time.)  
• You can eject the CD even when the unit is turned off.  
10  
Locating a track or a particular portion on a CD  
¢
Number buttons  
4
To fast forward or reverse the track  
Press and hold  
¢, while playing a CD, to fast forward the track.  
Press and hold 4 , while playing a CD, to reverse the track.  
To go to the next track or the previous track  
Press  
¢ briefly, while playing a CD, to go ahead to the beginning  
of the next track. Each time you press the button consecutively, the  
beginning of the next tracks is located and played back.  
Press 4  
briefly, while playing a CD, to go back to the beginning of  
the current track. Each time you press the button consecutively, the  
beginning of the previous tracks is located and played back.  
To go to a particular track directly  
7
8
9
10  
11  
12  
Press the number button corresponding to the track number to start its  
playback.  
To select a track number from 1 – 6:  
Press 1 (7) – 6 (12) briefly.  
To select a track number from 7 – 12:  
Press and hold 1 (7) – 6 (12) for more than 1 second.  
11  
Selecting CD playback modes  
MO/RND  
RPT/SCAN  
To play back tracks at random (Random Play)  
You can play back all tracks on the CD at random.  
Each time you press MO/RND (Mono/Random) while playing a CD, CD  
MO/RND  
random play mode turns on and off alternatively.  
When the random mode is turned on, the RND indicator lights up on the  
display and a track randomly selected starts playing.  
To play back tracks repeatedly (Repeat Play)  
You can play back the current track repeatedly.  
Each time you press RPT/SCAN (Repeat/Scan) while playing a CD, CD  
RPT  
SCAN  
repeat play mode turns on and off alternatively.  
When the repeat mode is turned on, the RPT indicator lights up on the  
display.  
Track number of the currently playing track  
Other convenient CD functions  
Prohibiting CD ejection  
You can prohibit the CD ejection and can “lock” a CD in the loading slot.  
Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about  
5 seconds, and the CD is “locked.”  
To cancel the prohibition and “unlock” the CD, press and hold CD and 0 for more than 2  
seconds again. “EJECT” appears on the display, and the CD ejects from the loading slot.  
12  
SOUND ADJUSTMENTS  
Adjusting the sound  
You can adjust the treble/bass sound and the speaker balance.  
Equalization pattern indicator  
2
1
1
Select the item you want to adjust.  
Indication  
To do:  
Range  
BAS  
Adjust the bass  
–06 (min.) — +06 (max.)  
(Bass)  
TRE  
Adjust the treble  
–06 (min.) — +06 (max.)  
(Treble)  
FAD  
(Fader)*  
Adjust the front and rear speaker  
balance  
R06 (rear only) — F06 (front only)  
L06 (left only) — R06 (right only)  
00 (min.) — 50 (max.)  
BAL  
Adjust the left and right speaker  
(Balance) balance  
VOL  
Adjust the volume  
(Volume)  
Note:  
* If you are using a two-speaker system, set the fader level to “00.”  
2
Adjust the level.  
Equalization pattern changes as  
you adjust the bass or treble.  
Note:  
Normally the + and – buttons works as the volume control.  
So you do not have to select “VOL” to adjust the volume level.  
13  
Turning on/off the loudness function  
The human ear is less sensitive to low and high frequencies at low volumes.  
The loudness function can boost these frequencies to produce well-balanced sound at low  
volume level.  
Each time you press LOUD, the loudness function turns on and off alternatively.  
LOUD  
@A  
14  
Using the Sound Control Memory  
You can select and store a preset sound adjustment suitable to each playback source.  
(Advanced SCM)  
Selecting and storing the sound modes  
Once you select a sound mode, it is stored in memory, and will be recalled every time you  
select the same source. A sound mode can be stored each of the following sources — FM1,  
FM2, FM3, AM and CD.  
• If you do not want to store the sound mode separately for each playback source, but want to  
use the same sound mode for all the sources, see “Canceling Advanced SCM” on page 17.  
“SCM” indicator  
and sound mode  
indicators  
Equalization pattern indicator  
1
1
SCM  
Select the sound mode you want.  
Each time you press the button, the sound mode changes as follows.  
• When “SCM LINK” is set to “LINK ON”, the selected sound mode can  
be stored in memory for the current source and the effect applies only  
to the current source. Each time you change the playback source, the  
SCM indicator flashes on the display.  
• When “SCM LINK” is set to “LINK OFF”, the selected sound mode  
effect applies to any source.  
Indication  
For:  
Preset values  
Bass  
00  
Treble  
00  
Loudness  
SCM OFF  
BEAT  
(Flat sound)  
On  
On  
Off  
Off  
Rock or disco music  
Quiet background music  
Light music  
+02  
+01  
+04  
00  
SOFT  
–03  
+01  
POP  
15  
Recalling the sound modes  
1
1
C D  
Select the source while the “SCM” indicator  
is lit on the display.  
The “SCM” indicator starts flashing, and the sound mode  
stored in memory for the selected source is recalled.  
F M  
A M  
Sound mode  
indicator  
Notes:  
• You can adjust each sound mode to your preference, and store it in memory.  
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”  
on page 18.  
• To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily,  
see pages 13 and 14. (Your adjustments will be cancelled if another source is selected.)  
16  
Canceling Advanced SCM  
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes  
and the playback sources.  
When shipped from the factory, a different sound mode can be stored in memory for each  
source so that you can change the sound modes simply by changing the sources.  
LINK ON: Advanced SCM (different SCMs for different sources)  
LINK OFF: Conventional SCM (one SCM for all sources)  
3
1,4 2  
1
Press and hold SEL for more than 2 seconds.  
“CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears  
on the display.  
2
Select “SCM LINK” if not shown on the display.  
3
Select the desired mode — “LINK ON” or  
“LINK OFF”.  
4
Finish the setting.  
17  
Storing your own sound adjustments  
You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and  
store your own adjustments in memory.  
3
2 2  
1,4  
SCM  
1
2
Call up the sound mode you want to adjust.  
See page 13 for details.  
Within  
5 seconds  
To adjust the bass or treble sound level  
Select “BAS” or “TRE.”  
LOUD  
To turn on or off the loudness function  
Each time you press LOUD, the loudness function turns on and off  
alternatively. (= go to step 4)  
Within  
5 seconds  
3
Adjust the bass or treble level.  
See page 13 for details.  
Within  
5 seconds  
4
5
SCM  
Press and hold SCM until the sound mode  
you have selected in step 1 flashes on the  
display.  
Your setting is stored in memory.  
Repeat the same procedure to store other settings.  
To reset to the factory settings  
Repeat the same procedure and reassign the preset values listed in the table on page 15.  
18  
OTHER MAIN FUNCTIONS  
Setting the clock  
DISP  
2,3 1,4 2,3  
1
2
Press and hold the button for more than  
2 seconds.  
“CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL”  
appears on the display.  
1.  
1.  
Set the hour.  
1. Select “CLOCK H” if not shown on the  
display.  
2.  
2.  
2. Adjust the hour.  
3
4
Set the minute.  
1. Select “CLOCK M.”  
2. Adjust the minute.  
Start the clock.  
To check the current clock time (changing the display mode)  
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.  
During tuner operation:  
During CD operation:  
Elapsed  
playing time  
Clock  
Clock  
Frequency  
• If the unit is not in use when you press DISP, the power turns on, the clock time is shown for  
5 seconds, then the power turns off.  
19  
Selecting the level display  
You can select the level display according to your preference.  
When shipped from the factory, “VOL 2” is selected.  
VOL 1: Shows the volume level indicator and the equalization pattern indicator.  
VOL 2: Alternates “VOL 1” setting and illumination display.  
OFF: Erase the volume level indicator and the equalization pattern indicator.  
Volume level indicator  
Equalization pattern indicator  
3 1,4 2  
1
Press and hold SEL for more than 2 seconds.  
“CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears  
on the display.  
2
Select “LEVEL” if not shown on the display.  
3
Select the desired mode — “VOL 1”, “VOL 2”  
or “OFF”.  
4
Finish the setting.  
20  
Detaching the control panel  
You can detach the control panel when leaving the car.  
When detaching or attaching the control panel, be careful not to damage the connectors on  
the back of the control panel and on the panel holder.  
How to detach the control  
panel  
How to attach the control  
panel  
Before detaching the control panel, be sure  
to turn off the power.  
1
Insert the left side of the  
control panel into the groove  
on the panel holder.  
1
Unlock the control panel.  
2
2
Press the right side of the  
control panel to fix it to the  
panel holder.  
Lift and pull the control panel  
out of the unit.  
3
Note on cleaning the connectors:  
If you frequently detach the control panel, the  
connectors will deteriorate.  
Put the detached control  
panel into the case provided.  
To minimize this possibility, periodically wipe  
the connectors with a cotton swab or cloth  
moistened with alcohol, being careful not to  
damage the connectors.  
Connectors  
21  
REMOTE OPERATIONS  
This section is ONLY FOR KD-S620.  
Remote sensor  
Before using the remote controller:  
• Aim the remote controller directly at the remote sensor on  
the main unit. Make sure there is no obstacle in between.  
• Do not expose the remote sensor to strong light (direct  
sunlight or artificial lighting).  
Installing the battery  
When the controllable range or effectiveness of the remote controller decreases, replace  
the battery.  
1. Remove the battery holder.  
1) Push out in the direction indicated by the arrow  
using a ball point pen or a similar tool.  
2) Remove the battery holder.  
(back side)  
1)  
2)  
Lithium coin battery  
(product number:  
CR2025)  
2. Place the battery.  
Slide the battery into the holder with the + side facing  
upwards so that the battery is fixed in the holder.  
3. Return the battery holder.  
Insert again the battery holder pushing it until you hear  
a clicking sound.  
(back side)  
WARNING:  
• Store the batteries in a place which children cannot reach.  
If a child accidentally swallows the battery, immediately consult a doctor.  
• Do not recharge, short, disassemble or heat the batteries or dispose of in a fire.  
Doing any of these things may cause the batteries to give off heat, crack or start a fire.  
• Do not leave the batteries with other metallic materials.  
Doing this may cause the batteries to give off heat, crack or start a fire.  
• When throwing away or saving the batteries, wrap in tape and insulate; otherwise, , it may cause  
the batteries to give off heat, crack or start a fire.  
• Do not poke the batteries with tweezers or similar tools.  
Doing this may cause the batteries to give off heat, crack or start a fire.  
22  
Using the remote controller  
1 Functions the same as the  
button on the main unit.  
2 • Functions as the BAND button while listening to the radio.  
Each time you press the button, the band changes.  
• Does not function as the PROG button.  
5
6
1
2
3
4
7
3 • Functions as the PRESET button while listening to the radio.  
Each time you press the button, the preset station number  
increases, and the selected station is tuned in.  
4 Functions the same as the + and – buttons on the main unit.  
Note: These buttons cannot be used for the clock (CLOCK H,  
CLOCK M), SCM LINK and LEVEL (see pages 19, 17 and  
20).  
5 Selects the sound mode.  
Each time you press SCM (Sound Control Memory), the mode  
changes.  
6 Selects the source.  
RM-RK31  
Each time you press FUNC (function), the source changes.  
7 • Searches stations while listening to the radio.  
• Fast forwards or reverses the track if pressed and held while  
listening to a CD.  
• Skips to the beginning of the next tracks or goes back to the  
beginning of the current (or previous tracks) if pressed briefly  
while listening to a CD.  
23  
MAINTENANCE  
Handling CDs  
COMPACT  
This unit has been designed only to reproduce the CDs bearing the  
Other discs cannot be played back.  
mark.  
DIGITAL AUDIO  
How to handle CDs  
When removing a CD from its case, press down the center holder of the case  
and lift the CD out, holding it by the edges.  
Center holder  
• Always hold the CD by the edges. Do not touch its recording surface.  
When storing a CD into its case, gently insert the CD around the center  
holder (with the printed surface facing up).  
• Make sure to store CDs into the cases after use.  
To keep CDs clean  
A dirty CD may not play correctly. If a CD does becomes dirty, wipe it with a soft  
cloth in a straight line from center to edge.  
To play new CDs  
New CDs may have some rough spots around the inner and outer edges. If such  
a CD is used, this unit may reject the CD.  
To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.  
Moisture condensation  
Moisture may condense on the lens inside the CD player in the following cases:  
• After starting the heater in the car.  
• If it becomes very humid inside the car.  
Should this occur, the CD player may malfunction. In this case, eject the CD and leave the unit turned on  
for a few hours until the moisture evaporates.  
CAUTIONS:  
• Do not insert 8cm (3 3/16") CDs (single CDs) into the loading slot. (Such CDs cannot be ejected.)  
• Do not insert any CD of unusual shape – like a heart or flower; otherwise, it will cause a malfunction.  
• Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high temperature  
and humidity. Do not leave them in a car.  
• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean  
CDs.  
When playing a CD-R (Recordable)  
You can play back your original CD-Rs on this recevier.  
• Before playing back CD-Rs, read their instructions or cautions carefully.  
• Some CD-Rs recorded on CD recorders may not be played back on this receiver because of their disc  
characteristics, and of the following reasons:  
– Discs are dirty or scratched.  
– Moisture condensation occurs on the lens inside the unit.  
– The pickup lens inside the CD player is dirty.  
• Use only “finalized” CD-Rs.  
• CD-RWs (Rewritable) cannot be played back on this recevier.  
About mistracking:  
Mistracking may result from driving on extremely rough roads. This does not damage the unit and  
the CD, but will be annoying.  
We recommend that you stop CD play while driving on such rough roads.  
24  
TROUBLESHOOTING  
What appears to be trouble is not always serious. Check the following points before calling a  
service center.  
Symptoms  
Causes  
Remedies  
• CD cannot be played back.  
CD is inserted upside down.  
Insert the CD correctly.  
• CD sound is sometimes  
interrupted.  
You are driving on rough  
roads.  
Stop CD play while driving  
rough roads.  
CD is scratched.  
Change the CD.  
Connections are incorrect.  
Check the cords and  
connections.  
• “NO DISC” appears on the  
display.  
No CD is in the loading slot.  
CD is inserted incorrectly.  
Insert a CD into the loading  
slot.  
Insert it correctly.  
• Sound cannot be heard from The volume control is turned  
Adjust it to the optimum level.  
the speakers.  
to the minimum level.  
Connections are incorrect.  
Check the cords and  
connections.  
• SSM (Strong-station  
Sequential Memory)  
automatic preset does not  
work.  
Signals are too weak.  
Store stations manually.  
• Static noise while listening  
to the radio.  
The antenna is not connected Connect the antenna firmly.  
firmly.  
• CD can be neither played  
back nor ejected.  
The CD player may function  
incorrectly.  
Press  
and 0 at the  
same time for more than 2  
seconds. Be careful not to  
drop CD when it is ejected.  
• The unit does not work at  
all.  
The built-in microcomputer  
may function incorrectly due to the same time for more than 2  
Press  
and SEL at  
noise, etc.  
seconds to reset the unit. (The  
clock setting and preset  
stations stored in memory are  
erased.) (See page 2.)  
25  
SPECIFICATIONS  
AUDIO AMPLIFIER SECTION  
CD PLAYER SECTION  
Maximum Power Output:  
Type: Compact disc player  
Front: 40 watts per channel  
Rear: 40 watts per channel  
Continuous Power Output (RMS):  
Front: 16 watts per channel into 4 ,  
40 Hz to 20 000 Hz at no more  
than 0.8% total harmonic  
Signal Detection System: Non-contact optical  
pickup (semiconductor laser)  
Number of channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Dynamic Range: 96 dB  
Signal-to-Noise Ratio: 98 dB  
distortion.  
Wow and Flutter: Less than measurable limit  
Rear: 16 watts per channel into 4 ,  
40 Hz to 20 000 Hz at no more  
than 0.8% total harmonic  
GENERAL  
Power Requirement  
distortion.  
Operating Voltage: DC 14.4 volts (11 volts to  
16 volts allowance)  
Allowable Working Temperature:  
0°C to +40°C (32°F to 104°F)  
Grounding System: Negative ground  
Dimensions (W x H x D)  
Load Impedance: 4 (4 to 8 allowance)  
Tone Control Range  
Bass: ±10 dB at 100 Hz  
Treble:±10 dB at 10 kHz  
Frequency Response: 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio: 70 dB  
Line-Out Level/Impedance: 2.0 V/20 kload  
(full scale)  
Installation Size:  
182 mm x 52 mm x 150 mm  
(7-3/16" x 2-1/16" x 5-15/16")  
Panel Size: 188 mm x 58 mm x 14 mm  
(7-7/16" x 2-5/16" x 5/8")  
Output Impedance: 1 kΩ  
TUNER SECTION  
Frequency Range  
FM: 87.5 MHz to 107.9 MHz  
AM: 530 kHz to 1 710 kHz  
Mass: 1.3 kg (2.9 lbs) (excluding accessories)  
Design and specifications subject to change  
without notice.  
[FM Tuner]  
If a kit is necessary for your car, consult  
your telephone directory for the nearest  
car audio speciality shop.  
Usable Sensitivity: 11.3 dBf (1.0 µV/75 )  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 )  
Alternate Channel Selectivity (400 kHz):  
65 dB  
Frequency Response: 40 Hz to 15 000 Hz  
Stereo Separation: 35 dB  
Capture Ratio: 1.5 dB  
[AM Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
26  
.jvcmobile.com  
Visit us on-line for  
Technical Support & Customer Satisfaction Survey.  
US RESIDENTS ONLY  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to Reset  
Still having trouble??  
USA ONLY  
Call 1-800-252-5722  
We can help you!  
VICTOR COMPANY OF JAPAN, LIMITED  
EN, SP, FR  
0800HISFLEJES  
J
C
V
KD-S620  
KD-S570  
Installation/Connection Manual  
Manual de instalación/conexión  
Manuel d’installation/raccordement  
0800HISFLEJES  
EN, SP, FR  
J
C
V
GET0003-002A  
[J]  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
This unit is designed to operate on 12 volts DC, NEGATIVE Esta unidad está diseñada para funcionar con 12 voltios de Cet appareil est conçu pour fonctionner sur des sources de  
ground electrical systems.  
CC, con sistemas eléctricos de masa NEGATIVA.  
courant continu de 12 volts à masse NEGATIVE.  
INSTALLATION (IN-DASH  
MOUNTING)  
INSTALACION (MONTAJE EN EL  
TABLERO DE INSTRUMENTOS)  
INSTALLATION (MONTAGE DANS LE  
TABLEAU DE BORD)  
The following illustration shows a typical installation. However, La siguiente ilustración muestra una instalación típica. Sin L’illustration suivante est un exemple d’installation typique.  
you should make adjustments corresponding to your specific  
car. If you have any questions or require information regarding  
installation kits, consult your JVC car audio dealer or a company  
supplying kits.  
embargo usted deberá efectuar los ajustes correspondientes  
a su automóvil. Si tiene alguna pregunta o necesita información  
acerca de las herramientas para instalación, consulte con su  
concesionario de JVC de equipos de audio para automóviles o  
a una compañía que suministra tales herramientas.  
Cependant, vous devez faire les ajustements correspondant à  
votre voiture particulière. Si vous avez des questions ou avez  
besoin d’information sur des kits d’installation, consulter votre  
revendeur d’autoradios JVC ou une compagnie  
d’approvisionnement.  
1 Avant le montage: Appuyez sur  
(déblocage du  
panneau de commande) pour éventuellement détacher le  
panneau de commande.  
1 Antes de instalar: Pulse  
(soltar panel de control) para  
1 Before mounting: Press  
(Control Panel Release) to  
separar el panel de control si ya está unido.  
detach the control panel if already attached.  
* Cuando se envía de la fábrica, el panel de control está  
embalado en el estuche duro.  
* When shipped from the factory, the control panel is packed  
in the hard case  
* Lorsque ce panneau de commande sort d’usine, il est  
rangé dans un étui de transport.  
2 Retire la placa de guarnición.  
2 Remove the trim plate.  
2 Retirer la plaque d’assemblage.  
3 Retire la cubierta después de desenganchar los retenes  
3 Remove the sleeve after disengaging the sleeve locks.  
1 Stand the unit.  
de la cubierta.  
3 Libérer les verrous du manchon et retirer le manchon.  
1 Ponga la unidad vertical.  
1 Poser l’appareil à la verticale.  
Note: When you stand the unit, be careful not to damage  
the fuse on the rear.  
2 Insert the 2 handles between the unit and the sleeve, as  
illustrated, to disengage the sleeve locks.  
3 Remove the sleeve.  
Nota: Al poner la unidad vertical, tenga cuidado de no  
dañar el fusible provisto en la parte posterior.  
2 Inserte las dos asas entre la unidad y la cubierta tal  
como en la ilustración y desenganche los retenes de la  
cubierta.  
Remarque: Lorsque vous mettez l’appareil à la verticale,  
faire attention de ne pas endommager le fusible situé  
sur le fond.  
2 Insérer les 2 poignées entre l’appareil et le manchon  
comme indiqué pour désengagé les verrous de manchon.  
Note: Be sure to keep the handles for future use after  
installing the unit.  
3 Retire la cubierta.  
3 Retirer le manchon.  
Nota: Después de instalar la unidad, asegúrese de  
guardar las asas para uso futuro.  
Remarque: S'assurer de garder les poignées pour une  
utilisation ultérieur, après l'installation de l'appareil.  
4 Install the sleeve into the dashboard.  
4 Instale la cubierta en el tablero de instrumentos.  
* After the sleeve is correctly installed in the dashboard,  
bend the appropriate tabs to hold the sleeve firmly in place,  
as illustrated.  
4 Installer le manchon dans le tableau de bord.  
* Después de que la cubierta esté correctamente instalada  
en el tablero de instrumentos, doble las lengüetas  
correspondientes para sostener la cubierta firmemente  
en su lugar, tal como se muestra.  
* Après installation correcte du manchon dans le tableau  
de bord, plier les bonnes pattes pour maintenir fermement  
le manchon en place, comme montré.  
5 Fix the mounting bolt to the rear of the unit’s body and place  
the rubber cushion over the end of the bolt.  
5 Monter le boulon de montage sur l’arrière du corps de  
l’appareil puis passer l’amortisseur en caoutchouc sur  
l’extrémité du boulon.  
5 Fixe el perno de montaje ou la parte trasera del cuerpo de la  
6 Do the required electrical connections explained on the back  
unidad y coloque el cojín de goma sobre el extremo del perno.  
of this instructions.  
6 Realice las conexiones eléctricas requeridas en base a  
las explicaciones que figuran en la parte de atrás de estas  
instrucciones.  
7 Slide the unit into the sleeve until it is locked.  
6 Réalisez les connexions électriques expliquées au dos de  
8 Attach the trim plate so that the projection on the trim plate  
cette page.  
is fixed to the left side of the unit.  
7 Deslice la unidad dentro de la cubierta hasta que quede  
7 Faire glisser l’appareil dans le manchon jusqu’à ce qu’il soit  
9 Attach the control panel.  
trabada.  
verrouillé.  
8 Coloque la placa de guarnición de manera que el saliente de  
8 Attachez la plaque d’ajustage de façon que la projection de  
la misma quede colocado en el lateral izquierdo de la unidad.  
la plaque soit fixée sur le cote gauche de l’appareil.  
9 Coloque el panel de control.  
9 Remonter le panneau de commande.  
Dashboard  
Tablero de instrumentos  
Tableau de bord  
1
2
Rubber cushion  
Cojín de goma  
Amortisseur en caoutchouc  
184 mm  
Sleeve  
Cubierta  
Manchon  
53 mm  
4
5
Mounting bolt  
Perno de montaje  
Boulon de montage  
7
See the back page for electrical  
connections.  
Con respecto a las conexiones  
eléctricas, consulte la página de  
atrás.  
6
3
8
4
*
Handle  
Manija  
Voir le dos de cette page pour les  
connexions électriques.  
9
Poignée  
Sleeve  
10  
10  
Cubierta  
1
1
3
Manchon  
2
Trim plate  
Placa de guarnición  
Plaque d’assemblage  
Fuse  
Fusible  
2
3
4
Lock Plate  
Fusible  
Placa de bloqueo  
Plaque de verrouillage  
5
Slot  
Ranura  
Fente  
TROUBLESHOOTING  
LOCALIZACION DE AVERIAS  
EN CAS DE DIFFICULTÉS  
The fuse blows.  
• El fusible se quema.  
• Le fusible saute.  
* Are the red and black leads connected correctly?  
* ¿Están los conductores rojo y negro correctamente conectados? * Les fils rouge et noir sont-ils racordés correctement?  
Power cannot be turned on.  
* Is the yellow lead connected?  
• No es posible conectar la alimentación.  
* ¿Está el cable amarillo conectado?  
• L’appareil ne peut pas être mise sous tension.  
* Le fil jaune est-elle raccordée?  
No sound from the speakers.  
* Is the speaker output lead short-circuited?  
• No sale sonido de los altavoces.  
* ¿Está el cable de salida del altavoz cortocircuitado?  
• Pas de son des haut-parleurs.  
* Le fil de sortie de haut-parleur est-il court-circuité?  
Sound is distorted.  
• El sonido presenta distorsión.  
• Le son est déformé.  
* Is the speaker output lead grounded?  
* ¿Está el cable de salida del altavoz conectado a masa?  
* Le fil de sortie de haut-parleur est-il à la masse?  
* Are the “–” terminals of L and R speakers grounded in common? * ¿Están los terminales “–” de los altavoces L y R conectados a * Les bornes “–” des haut-parleurs gauche et droit sont-elles mises  
una masa común?  
• La unidad se calienta.  
ensemble à la masse?  
• L’appareil devient chaud.  
* Le fil de sortie de haut-parleur est-il à la masse?  
Unit becomes hot.  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common? * ¿Está el cable de salida del altavoz conectado a masa?  
* ¿Están los terminales “–” de los altavoces L y R conectados a * Les bornes “–” des haut-parleurs gauche et droit sont-elles mises  
una masa común?  
ensemble à la masse?  
When installing the unit without using the sleeve  
Instalación de la unidad sin utilizar la cubierta  
Lors de l'installation de l’appareil sans utiliser de manchon  
When using the optional stay  
Cuando emplea un soporte opcional  
Lors de l'utilisation du hauban en option  
In a Toyota for example, first remove the car radio and install the unit in its place.  
En un Toyota por ejemplo, primero extraiga la radio del automóvil y luego instale la unidad en su  
lugar.  
Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.  
Fire wall  
Tabique a prueba de incendios  
Cloison  
Flat type screws (M5 x 6 mm)*  
* Not included with this unit.  
* No suministrado con esta unidad.  
* Non fourni avec cet appareil.  
Tornillos tipo plano (M5 x 6 mm)*  
Vis à tête plate (M5 x 6 mm)*  
Stay (option)  
Soporte (opción)  
Hauban (en option)  
Washer  
Arandela  
Rondelle  
Dashboard  
Tablero de instrumentos  
Tableau de bord  
Lock nut  
Tuerca de seguridad  
Ecrou d’arrêt  
Bracket*  
Ménsula*  
Support*  
Screw (option)  
Tornillo (opción)  
Vis (en option)  
Mounting bolt  
Perno de montaje  
Boulon de montage  
Pocket  
Flat type screws (M5 x 6 mm)*  
Tornillos tipo plano (M5 x 6 mm)*  
Vis à tête plate (M5 x 6 mm)*  
Bracket*  
Ménsula*  
Support*  
Compartimiento  
Poche  
Sleeve  
Cubierta  
Manchon  
Note: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If  
longer screws are used, they could damage the unit.  
Nota: Cuando instala la unidad en la ménsula de montaje, asegúrese de utilizar los tornillos de 6  
mm de longitud. Si se utilizan tornillos más largos, éstos pueden dañar la unidad.  
Remarque: Lors de l'installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis  
d’une longueur de 6 mm. Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.  
Retrait de l’appareil  
Avant de retirer l’appareil, libérer la section arrière.  
Removing the unit  
• Before removing the unit, release the rear section.  
Extracción de la unidad  
• Antes de extraer la unidad, libere la sección trasera.  
1 Retirer le panneau de commande.  
1 Remove the control panel.  
1 Extraiga el panel de control.  
2 Retirer la plaque d’assemblage.  
2 Remove the trim plate.  
2 Retire la placa de guarnición.  
3 Introduire les deux poignées dans les fentes, comme montré.  
Puis, tout en tirant doucement les poignées écartées, faire  
glisser l’appareil pour le sortir. (S'assurer de conserver les  
poignées après l’installation de l’appareil.)  
3 Insert the 2 handles into the slots, as shown. Then, while gently 3 Inserte las 2 manijas entre las ranuras, como se muestra.  
pulling the handles away from each other, slide out the unit.  
Luego, separe gentilmente las manijas y extraiga la unidad.  
(Asegúrese de conservar las manijas después de  
instalarlo.)  
(Be sure to keep the handles after installing it.)  
1
3
2
Handle  
Manija  
Poignée  
Parts list for installation and connection  
The following parts are provided with this unit.  
After checking them, please set them correctly.  
Lista de piezas para instalación y conexión  
Con esta unidad se suministran las siguientes piezas.  
Después de inspeccionarlas, colóquelas correctamente.  
Liste des pièces pour l’installation et  
raccordement  
Les pièces suivantes sont fournies avec cet appareil.  
Après vérification, veuillez les placer correctement.  
Hard case/Control Panel  
Estuche duro/Panel de  
control  
Etui de transport /Panneau  
de command  
Sleeve  
Cubierta  
Manchon  
FOR KD-S620  
PARA KD-S620  
POUR LES KD-S620  
Remote controller  
Mando a distancia  
Télécommande  
Trim plate  
Placa de guarnición  
Plaque d’assemblage  
Power cord  
Cordón de alimentación  
Cordon d’alimentation  
Handles  
Manijas  
Poignées  
Battery  
Pila  
Pile  
Lock nut (M5)  
Tuerca de seguridad (M5)  
Ecrou d’arrêt (M5)  
Rondelle (ø5)  
Mounting bolt (M5 x 20 mm)  
Perno de montaje (M5 x 20 mm)  
Boulon de montage (M5 x 20 mm)  
Rubber cushion  
Cojín de goma  
Amortisseur en caoutchouc  
Washer (ø5)  
Arandela (ø5)  
CR2025  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
ELECTRICAL CONNECTIONS  
CONEXIONES ELECTRICAS  
RACCORDEMENTS ELECTRIQUES  
To prevent short circuits, we recommend that you disconnect the Para evitar cortocircuitos, recomendamos que desconecte el Pour éviter tout court-circuit, nous vous recommandons de  
battery’s negative terminal and make all electrical connections terminal negativo de la batería y que efectúe todas las conexiones débrancher la borne négative de la batterie et d’effectuer tous les  
before installing the unit. If you are not sure how to install this unit eléctricas antes de instalar la unidad. Si usted no está seguro de raccordements électriques avant d’installer l’appareil. Si l'on n’est  
correctly, have it installed by a qualified technician.  
cómo instalar correctamente la unidad, hágala instalar por un pas sûr de pouvoir installer correctement cet appareil, le faire  
técnico cualificado.  
installer par un technicien qualifié.  
Note:  
This unit is designed to operate only on 12 volts DC, NEGATIVE  
ground electrical systems. If your vehicle does not have this  
system, a voltage inverter is required, which can be purchased at  
JVC car audio dealers.  
Nota:  
Remarque:  
Esta unidad está diseñada para funcionar con 12 voltios de CC, Cet appareil est conçu pour fonctionner sur des sources de courant  
con sistemas eléctricos de masa NEGATIVA solamente. Si su continu de 12 volts à masse NEGATIVE seulement. Si votre  
vehículo no posee este sistema, será necesario un inversor de véhicule n’offre pas ce type d’alimentation, il vous faut un  
tensión, que puede ser adquirido en los concesionarios de JVC convertisseur de tension, que vous pouvez acheter chez un  
• Replace the fuse with one of the specified rating. If the fuse  
blows frequently, consult your JVC car audio dealer.  
• If noise is a problem...  
This unit incorporates a noise filter in the power circuit. However,  
with some vehicles, clicking or other unwanted noise may occur.  
If this happens, connect the unit’s rear ground terminal (See  
connection diagram below.) to the car’s chassis using shorter  
and thicker cords, such as copper braiding or gauge wire. If noise  
still persists, consult your JVC car audio dealer.  
• Maximum input of the speakers should be more than 40 watts at  
the rear and 40 watts at the front, with an impedance of 4 to 8  
ohms.  
Be sure to ground this unit to the car’s chassis.  
• The heat sink becomes very hot after use. Be careful not to  
touch it when removing this unit.  
de equipos de audio para automóviles.  
• Reemplace el fusible por uno con la corriente especificada. Si Remplacer le fusible par un de la valeur précisée. Si le fusible  
el fusible se quemase frecuentemente consulte con su saute souvent, consulter votre revendeur d’autoradios JVC.  
concesionario de JVC de equipos de audio para automóviles. Si le bruit est un problème...  
• Si el ruido fuese un problema...  
Esta unidad tiene un filtro de ruido en el circuito de alimentación.  
Sin embargo, en algunos vehículos, pueden producirse  
chasquidos u otros ruidos indeseados. En tal caso conecte el  
terminal de tierra posterior (Ver diagrama de conexión abajo.)  
del receptor al chasis del automóvil, utilizando cordones más  
gruesos y cortos tales como alambre de cobre trenzado o de  
grueso calibre. Si el ruido persiste, consulte a su concesionario  
de JVC de equipos de audio para automóvil.  
• La entrada máxima de los altavoces traseros debe ser mayor  
de 40 vatios y la de los delanteros de 40 vatios, con una  
impedancia de 4 a 8 ohmios.  
Asegúrese de conectar esta unidad a tierra en el chasis del  
automóvil.  
• El sumidero térmico estará muy caliente después del uso.  
Asegúrese de no tocarlo al desmontar esta unidad.  
revendeur d’autoradios JVC.  
Cet appareil incorpore un filtre de bruit dans le circuit  
d’alimentation. Cependant, avec certains véhicules, quelques  
claquements ou autres bruits non désirés risquent de se produire.  
Si cela arrive, raccorder la borne de masse arrière de l’appareil  
au châssis de la voiture (voir le schéma de raccordement ci-  
dessous) en utilisant des cordons les plus gros et les plus courts  
possibles telle qu'une barre de cuivre ou une tresse. Si le bruit  
persiste, consulter votre revendeur d’autoradios JVC.  
La puissance admissible des haut-parleurs doit être supérieure  
à 40 watts à l’arrière et à 40 watts l’avant, avec une impédance  
de 4 à 8 ohms.  
• S'assurer de raccorder la mise à la masse de cet appareil  
au châssis de la voiture.  
Le radiateur devient très chaud après usage. Faire attention de  
ne pas le toucher en retirant cet appareil.  
Heat sink  
Sumidero térmico  
Dissipateur de chaleur  
A Typical Connections / Conexiones típicas / Raccordements typiques  
Before connecting: Check the wiring in the vehicle carefully not Antes de la conexión: Verifique atentamente el conexionado Avant de commencer la connexion: vérifiez attentivement le  
to fail in connecting this unit. Incorrect connection may cause a del vehículo para no cometer errores al conectar esta unidad. câblage du véhicule pour ne pas connecter incorrectement cet  
serious damage to this unit.  
Una conexión incorrecta podría producir daños graves en la appareil. Une connexion incorrecte peut endommager  
unidad. sérieusement l’appareil.  
1 Connect the colored leads of the power cord to the car battery,  
speakers and automatic antenna (if any) in the following 1 Conecte los conductores de color del cable de alimentación 1 Connectez les fils de couleur du cordon d’alimentation à la  
sequence.  
1 Black: ground  
a la batería del automóvil, altavoces y antena automática (si  
la hubiere) en la secuencia siguiente.  
1 Negro: a tierra.  
2 Amarillo: a la batería del automóvil (12V constantes)  
3 Rojo: a un terminal de accesorio  
4 Azul con rayas blancas: a la antena automática (200mA  
máx.)  
batterie de la voiture, aux enceintes et à l’antenne automatique  
(s’il y en a une) dans l’ordre suivant.  
1 Noir: a la masse  
2 Jaune: a la batterie de la voiture (12V constant)  
3 Rouge: à la prise accessoire  
2 Yellow: to car battery (constant 12V)  
3 Red: to an accessory terminal  
4 Blue with white stripe: to automatic antenna (200mA  
max.)  
4 Bleu à bandes blanches: à l’antenne automatique (200mA  
max.)  
5 Autres: aux enceintes  
5 Others: to speakers  
5 Otros: a los altavoces  
2 Connect the antenna cord.  
3 Finally connect the wiring harness to the unit.  
2 Conecte el cable de antena.  
3 Por último, conecte a la unidad el cableado preformado.  
2 Connectez le cordon d’antenne.  
3 Finalement, connectez le faisceau de fils à l’appareil.  
Line out  
(see diagram B )  
Salida de línea  
(véase diagrama B )  
Sortie de ligne  
(voir le diagramme B )  
10A fuse  
10  
Ignition switch  
Interruptor de encendido  
Interrupteur d'allumage  
Not supplied with this unit.  
No suministrado con esta unidad.  
Non fourni avec cet appareil.  
Rear ground terminal  
Terminal de tierra posterior  
Borne arrière de masse  
*
Antenna terminal  
Fusible de 10A  
Terminal de la antena  
Borne de l’antenne  
Fusible 10A  
2
*
*
Black  
Negro  
Noire  
To metallic body or chassis of the car  
A un cuerpo metálico o chasis del  
automóvil  
Vers corps métallique ou châssis du  
véhicule  
To antenna  
A la antena  
A l'antenne  
3
1
1
2
Yellow*1  
Amarillo*1  
Jaune*1  
To a live terminal in the fuse block connecting to the car battery  
(bypassing the ignition swich).  
A A un terminal activo del bloque de fusibles conectado a la  
batería del automóvil (desviando el interruptor de encendido)  
Aune borne sous tension du porte-fusible connectée à la batterie  
de la voiture (en dérivant l’interrupteur d’allumage)  
Red  
Rojo  
Rouge  
*1: Before checking the operation of this unit prior to installation,  
this lead must be connected, otherwise power cannot be turned  
on.  
Fuse block  
To an accessory terminal in the fuse block  
bloque de fusibles  
porte-fusible  
*1: Antes de comprobar el funcionamiento de esta unidad previa  
a de la instalación, es necesario conectar este cable, de lo  
contrario no se podrá conectar la alimentación.  
*1: Pour vérifier le fonctionnement de cet appareil avant  
installation, ce fil doit être raccordé, sinon l’appareil ne peut  
pas être mis sous tension.  
3
A un terminal accesorio del bloque de fusibles  
Vers borne accessoire du porte-fusible  
Blue with white stripe  
Azul con rayas blancas  
Bleu avec bande blanche  
To automatic antenna if any  
A la antena automática si la hubiere  
Vers borne d’antenne automatique s'il y en a une  
4
5
White with black stripe  
Blanco con rayas negras  
Blanc avec bande noire  
Gray with black stripe  
Gris con rayas negras  
Gris avec bande noire  
Gray  
Gris  
Gris  
Green with black stripe  
Verde con rayas negras  
Vert avec bande noire  
Green Purple with black stripe  
Verde Púrpura con rayas negras  
Purple  
Púrpura  
Violet  
White  
Blanco  
Blanc  
Vert  
Violet avec bande noire  
Left speaker (front)  
Right speaker (front)  
Left speaker (rear)  
Right speaker (rear)  
Altavoz izquierdo (frontal)  
Haut-parleur gauche (avant)  
Altavoz derecho (frontal)  
Haut-parleur droit (avant)  
Altavoz izquierdo (trasero)  
Haut-parleur gauche (arrière)  
Altavoz derecho (trasero)  
Haut-parleur droit (arrière)  
PRECAUCIONES sobre las conexiones de la  
fuente de alimentación y de los altavoces:  
PRECAUTIONS sur l’alimentation et la  
connexion des enceintes:  
PRECAUTIONS on power supply and speaker  
connections:  
• NO conecte los conductores de altavoz del cable de • NE CONNECTEZ PAS les fils d’enceintes du cordon  
• DO NOT connect the speaker leads of the power cord to  
the car battery; otherwise, the unit will be seriously  
damaged.  
alimentación a la batería de automóvil, pues podrían  
producirse graves daños en la unidad.  
d’alimentation à la batterie; sinon, l’appareil serait  
sérieusement endommagé.  
• Conecte correctamente el conductor negro (a tierra), el  
conductor amarillo (a la batería del automóvil, 12V constantes),  
y el conductor rojo (a un terminal de accesorio).  
• ANTES de conectar a los altavoces los conductores de altavoz  
del cable de alimentación, verifique el conexionado de altavoz  
de su automóvil.  
Si el conexionado de altavoz de su automóvil es como  
se indica en las Figs. 1 y 2 de abajo, NO conecte la unidad  
utilizando ese conexionado de altavoz original. Si lo hace,  
se producirán daños graves en la unidad.  
Vuelva a efectuar el conexionado de altavoz de manera que  
pueda conectar la unidad a los altavoces de la manera  
indicada en la Fig.3.  
Si el conexionado de altavoz de su automóvil es como  
se indica en la Fig.3, podrá conectar la unidad utilizando el  
conexionado de altavoz original de su automóvil.  
– Si tiene dudas sobre el conexionado de altavoz de su  
automóvil, consulte con su concesionario.  
• Connectez correctement le fil noir (a la masse), le fil jaune (a la  
batterie de la voiture,12V constant) et le fil rouge (à la prise  
accessoire).  
• AVANT de connecter les fils d’enceintes du cordon  
d’alimentation aux enceintes, vérifiez le câblage des enceintes  
de votre voiture.  
Si le câblage des enceintes de votre voiture est réalisé  
comme montré sur la Fig. 1 ou Fig. 2 ci-dessous, NE  
CONNECTEZ PAS l’appareil en utilisant ce câblage original  
d’enceintes. Si vous le faites, l’appareil sera sérieusement  
endommagé.  
Recommencez le câblage des enceintes de façon que vous  
puissiez connecter l’appareil aux enceintes comme montré  
sur la Fig. 3.  
• Connect the black lead (ground), yellow lead (to car battery,  
constant 12V), and red lead (to an accessory terminal) correctly.  
• BEFORE connecting the speaker leads of the power cord to  
the speakers, check the speaker wiring in your car.  
If the speaker wiring in your car is as illustrated in Fig. 1  
and Fig. 2 below, DO NOT connect the unit using that original  
speaker wiring. If you do, the unit will be seriously damaged.  
Redo the speaker wiring so that you can connect the unit to  
the speakers as illustrated in Fig. 3.  
If the speaker wiring in your car is as illustrated in Fig. 3,  
you can connect the unit using the original speaker wiring in  
your car.  
– If you are not sure of the speaker wiring of your car, consult  
your car dealer.  
Si le câblage des enceintes de votre voiture est comme  
montré sur la Fig. 3, vous pouvez connecter l’appareil en  
utilisant ce câblage original d’enceintes pour votre voiture.  
– Si vous n’êtes pas sûrs du câblage d’enceintes de votre  
voiture, consulter le concessionnaire de votre voiture.  
+
+
+
-
+
-
L
-
L
-
+
+
-
L
-
+
+
-
+
+
-
R
-
R
-
+
+
-
R
-
Fig. 3  
Fig. 1  
Fig. 2  
Connecting the leads / Conexión de los conductores / Raccordement des fils  
Solder the core wires to  
CAUTION / PRECAUCION / PRECAUTION:  
connect them securely.  
Suelde los alambres de alma  
para conectarlos con firmeza.  
Souder les âmes desfils pour  
les raccorder entre eux de  
façon sûre.  
To prevent short-circuit, cover the terminals of the UNUSED leads with insulating  
tape.  
Twist the core wires when connecting.  
Retuerza los alambres de alma para  
conectarlos.  
Para evitar cortocircuitos, cubra los cables NO UTILIZADOS con cinta aislante.  
Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS utilisés  
avec de la bande isolante  
Torsaderlesâmesdesfilsenlesraccordant.  
B Connections Adding Other Equipment / Conexiones para añadir otros equipos / Raccordement pour ajouter d’autres appareils  
Usted podrá conectar un amplificador y ostros equipos para  
Vous pouvez connecter un amplificateur ou autre appareil pour  
You can connect an amplifier and other equipment to upgrade  
mejorar el sistema estéreo de su automóvil.  
améliorer votre systéme autoradio.  
your car stereo system.  
• Conecte el cable remoto (azul con rayas blancas) al cable  
remoto del otro equipo para que pueda ser controlado a través  
de esta unidad.  
• Connecter le fil d'alimentation à distance (bleu avec des bandes  
blanches) au fil d'alimentation à distance de l'autre appareil  
de façon qu'il puisse être controlé par cet appareil.  
• Pour l'amplificateur seulement:  
– Raccorder les bornes de sortie ligne de cet appareil aux bornes  
d’entrée ligne de l’amplificateur.  
– Déconnectez les enceintes de cet appareil et connectez-  
les à l’amplificateur. Laissez les fils d’enceintes de cet  
appareil inutilisés. (Recouvrir les extrémités de ces fils  
inutilisés avec de la bande isolante comme montré ci-  
dessus.)  
• Connect the remote lead (blue with white stripe) to the remote  
lead of the other equipment so that it can be controlled through  
this unit.  
• For amplifier only:  
– Connect this unit’s line-out terminals to the amplifier’s line-in  
terminals.  
– Disconnect the speakers from this unit, connect them  
to the amplifier. Leave the speaker leads of this unit  
unused. (Cover the terminals of the these unused leads  
with insulating tape, as illustrated above.)  
• Sólo para el amplificador:  
– Conecte los terminales de salida de línea de esta unidad con  
los terminales de entrada de línea del amplificador.  
– Desconecte los altavoces de esta unidad y conéctelos al  
amplificador. Los cables de los altavoces de esta unidad  
quedan sin usar. (Cubra los terminales de estos cables  
sin usar con cinta aislante, tal comose indica en la figura  
de arriba).  
Amplifier / Amplificador / Amplificateur  
Rear speakers  
Altavoces posteriores  
Haut-parleur arrière  
Blue with white stripe  
Azul con rayas blancas  
Bleu avec bande blanche  
Y-connector (not supplied with this unit)  
Conector en Y (no suministrado con esta unidad)  
Connecteur Y (non fourni avec cet appareil)  
INPUT  
JVC amplifier  
L
L
Amplificador de JVC  
Remote lead  
Cable remoto  
R
Amplificateur JVC  
R
Fil d'alimentation à distance  
To automatic antenna if any  
A la antena automática, si la hubiere  
Vers l’antenne automatique, s’il y en a une  
Signal cord (not supplied with this unit)  
Cable de señal (no suministrado con esta unidad)  
Cordon de signal (non fourni avec cet appareil)  
LINE OUT  
L
L
REAR  
CAUTION / PRECAUCION / PRECAUTION:  
KD-S620/S570  
R
• To prevent internal heat builtup inside this unit, place this unit UNDER the other equipment.  
• Para evitar el aumento del calor interior de esta unidad, póngala DEBAJO del otro equipo.  
• Pour éviter un échauffement interne de cet appareil, placez-le SOUS l'autre appareil.  
R
Front speakers  
Altavoces delanteros  
Haut-parleur avant  

M Systems Flash Disk Pioneers Computer Accessories 91 SR 005 10 7L User Manual
Mr Coffee SPR 030308 User Manual
Motorola MOTO A810 User Manual
Motorola G24 User Manual
Memorex MP3223 User Manual
LG Electronics U250 User Manual
Lenoxx Electronics CD 857 User Manual
HTC One X 99HTB007 00 User Manual
HP Hewlett Packard Hewlett Packard Computer Accessories Switch yl Module User Manual
Clarion CD Player DXZ389RGUSB User Manual