User’s Guide
hp StorageWorks
1000ux/1900ux/2300ux
Optical Jukebox
First Edition (May 2004)
Part Number: AA966-90901
This guide describes procedures for operating and troubleshooting the HP StorageWorks
1000ux/1900ux/2300ux Optical Jukebox.
Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Text symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HP technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HP storage web site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HP authorized reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Identifying panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Front panel features and descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Back panel features and descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using Ultra Density Optical (UDO) disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Choosing a disk type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Labeling a disk cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Write-protecting an UDO disk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Loading a disk into the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Maintaining UDO media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using mixed media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using application software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Control panel features and descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using selection buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Jukebox menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Top-level menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Second-level menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Control panel operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
3
Contents
Ejecting a disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Entering the administration menu password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Changing the administration menu password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Viewing the current SCSI IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Default SCSI IDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Changing the current SCSI IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Configuring the jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Setting an operating configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Retrieving log history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Running an internal test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Troubleshooting common problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Retrieving log history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Running an internal test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using HP StorageWorks Library and Tape Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Jukebox specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Media specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Safety and regulatory specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
B Safety and Regulatory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Federal Communications Commission Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Class A Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Declaration of Conformity for products marked with the FCC logo -
United States only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Canadian Notice (Avis Canadien) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Class A Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
European Union Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
EC radio frequency interference statement (Europe only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
United Kingdom Telecommunications Act 1984. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Herstellerbescheinigung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
English translation of German sound emission directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Turvallisuusyhteenveto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Laserturvallisuus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Huolto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
English translation of Finland regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
BSMI notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Laser Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Laser Safety Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
CDRH regulations (USA only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Compliance with International Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
5
Contents
6
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
About This
Guide
About this Guide
■
■
“About This Guide” topics include:
■
■
■
Related documentation, page 8
Conventions, page 8
Getting help, page 10
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
7
About this Guide
Related documentation
In addition to this guide, HP provides corresponding information:
■
■
HP StorageWorks Optical 1000ux/1900ux/2300ux Jukebox Setup Guide
HP StorageWorks Optical 1000ux/1900ux/2300ux Jukebox Getting Started
Poster
Conventions
Conventions consist of the following:
■
■
Document conventions
Text symbols
Document conventions
This document follows the conventions in Table 1.
Table 1: Document conventions
Element
Convention
Cross-reference links
Blue text: Figure 1
Key and field names, menu items, buttons, and
dialogue box titles
Bold
File names, application names, and text
emphasis
Italics
User input, commands and directory names,
and system responses (output and messages)
Monospace font
COMMAND NAMESare uppercase monospace
font unless they are case sensitive
Variables
<monospace, italic font>
Web site addresses
Blue underlined sans serif font text
(
8
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
About this Guide
Text symbols
The following symbols may be found in the text of this guide. They have the
following meanings:
WARNING: Text set off in this manner indicates that failure to follow
directions in the warning could result in bodily harm or death.
AVERTISEMENT : le non-respect de ces instructions expose l'utilisateur
à des risques potentiellement très graves.
AVVERTENZA: La mancata osservanza delle indicazioni fornite in un
messaggio così evidenziato, può provocare lesioni personali o mettere
in pericolo la vita dell'utente.
VORSICHT: In dieser Form hervorgehobener Text weist darauf hin, dass die
Nichtbeachtung der Anleitungen zu Verletzungen oder zum Tod führen kann.
ADVERTENCIA: el texto con esta marca indica que si no se siguen las
instrucciones, pueden producirse lesiones corporales o incluso la muerte.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
9
About this Guide
Caution: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or data.
Note: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Getting help
If you still have a question after reading this guide, contact an HP authorized
service provider or access our web site: http://www.hp.com
.
HP technical support
Telephone numbers for worldwide technical support are listed on the following
HP web site: http://www.hp.com/support/
.
Note: For continuous quality improvement, calls may be recorded or monitored.
Be sure to have the following information available before calling:
■
■
■
■
■
■
■
Technical support registration or contract number (if applicable)
Product serial numbers
Product model names and numbers
Applicable error messages
Operating system type and revision level
Detailed, specific questions
HP StorageWorks Library and Tape Tools (L&TT) Support Ticket (if
applicable)
10
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
About this Guide
HP storage web site
The HP web site has the latest information on this product. Access storage at:
http://www.hp.com/country/us/eng/prodserv/storage.html. From this web site,
select the appropriate product or solution. You can also visit
.
HP authorized reseller
For the name of your nearest HP authorized reseller:
■
■
■
In the United States, call 1-800-345-1518
In Canada, call 1-800-263-5868
Elsewhere, see the HP web site for locations and telephone numbers:
.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
11
About this Guide
12
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
Identifying panel features
Identify the following panel features before you install the jukebox (see Figure 1
and Figure 2 on page 15).
Front panel features and descriptions
1
2
3
4
1
2
Control panel
Power switch
3
4
Mailslot
Front service access panel
Figure 1: Front panel features
■
Control panel—Used to manually control and monitor operation of the
jukebox. See the user’s guide for information on using the control panel.
■
Power switch—Turns power to the jukebox on and off. Located under the
panel through an access hole.
■
■
Mailslot—Used to insert and remove disks from the jukebox.
Front service access panel—A panel for service access that should only be
removed by qualified personnel.
14
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
Back panel features and descriptions
2
4
1
3
1
2
Active bus indicator
SCSI ports
3
4
Power receptacle
Back access panel
Figure 2: Back panel features
■
■
Active bus indicator—Lit when the SCSI bus is active.
SCSI ports—68-pin high-density SCSI connectors (Micro D-type). Used for
attaching the SCSI cable from the jukebox to the host computer. One port
must have a SCSI cable connected, and the other must have a SCSI terminator
connected to it.
■
Power receptacle—Used for connecting the power cord to the jukebox.
Located on the bottom of the power distribution assembly.
This panel is removed by pushing up on the panel (from the bottom) and then
pulling the panel out and away from the jukebox.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
15
Operations
WARNING: TThis product can only be used with an HP approved power cord
for your specific geographic region. Use of a non-HP approved power cord
may result in: 1) noncompliance with individual, country-specific safety
requirements; 2) insufficient conductor ampacity that could result in
overheating with potential personal injury and/or property damage; and 3) a
fractured power cord, which could cause the internal contacts to be exposed,
which potentially could subject the user to a shock hazard. HP disclaims all
liability when HP-approved power cords are not used.
AVERTISEMENT : ce produit ne peut être utilisé qu'avec un cordon
d'alimentation approuvé par HP pour votre zone géographique. L'utilisation
d'un cordon d'alimentation non approuvé par HP vous expose à ce qui suit :
1) non-conformité aux spécifications de sécurité du pays concerné ;
2) intensité admissible du conducteur insuffisante pouvant provoquer une
surchauffe créant un risque de blessure ou d'endommagement du produit ;
et 3) rupture de cordon pouvant exposer les contacts internes et créer
un risque d'électrocution pour l'utilisateur. HP décline toute responsabilité
en cas d'utilisation d'un cordon d'alimentation non approuvé.
AVVERTENZA: È possibile utilizzare questo prodotto solo con un cavo di
alimentazione approvato da HP specifico per il paese di utilizzo. L'utilizzo di
cavi di alimentazione non approvati da HP può produrre: 1) non conformità
ai requisiti di sicurezza specifici del paese di utilizzo; 2) amperaggio del
conduttore insufficiente con conseguente surriscaldamento e potenziale rischio
di lesioni a persone e/o cose; 3) rottura del cavo di alimentazione con
conseguente esposizione dei contatti interni e potenziale rischio di scosse
elettriche per l'utente. HP declina qualsiasi responsabilità in caso di utilizzo
di cavi di alimentazione non approvati da HP.
16
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
VORSICHT: Dieses Produkt darf ausschließlich mit einem von HP für die
Verwendung in Ihrem Land zugelassenen Netzkabel verwendet werden.
Die Verwendung eines nicht von HP zugelassenen Netzkabels kann
folgende Konsequenzen haben: 1) Nichteinhaltung spezifischer, nationaler
Sicherheitsbestimmungen; 2) Überschreiten der Strombelastbarkeit des
Netzkabels, was zu einer Überhitzung und in der Folge zu Verletzungen
und/oder Sachschäden führen kann; 3) Stromschlaggefahr durch offen
liegende Adern bei Kabelbruch. Für den Fall, dass nicht von HP zugelassene
Netzkabel verwendet werden, übernimmt HP keinerlei Haftung.
ADVERTENCIA: este producto sólo puede utilizarse con un cable de
alimentación aprobado por HP para su región geográfica específica.
El uso de un cable de alimentación no aprobado por HP puede provocar
lo siguiente: 1) el incumplimiento de requisitos de seguridad individuales
y específicos del país; 2) insuficiente corriente permanente admisible de
conductor que puede provocar un sobrecalentamiento y posibles lesiones
personales o daños a la propiedad; y 3) un cable de alimentación puede
romperse y exponer los contactos internos, lo que supone un peligro potencial
de descarga eléctrica para el usuario. HP renuncia a toda responsabilidad en
caso de utilizarse cables de alimentación no aprobados por HP.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
17
Operations
Using Ultra Density Optical (UDO) disks
UDO media is an integral part of the storage process. This section describes the
following:
■
■
■
■
Choosing a disk type, page 18
Labeling a disk cartridge, page 19
Write-protecting an UDO disk, page 20
Maintaining UDO media, page 22
Note: For UDO media specifications, see “Media specifications” on page 63.
Choosing a disk type
Two disk types can be used in the jukebox.
Table 2: UDO disk types
Disk Type
Description
HP Part Number
Rewritable
Designed for virtually
unlimited read and write
cycles
Q2031A
Write once, ready many Designed for permanent
Q2030A
times (WORM)
storage of data that cannot
be altered or erased
To order HP UDO media, contact your local HP Authorized Reseller or buy online
.
18
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
Labeling a disk cartridge
Make it a practice to label your UDO disk cartridges. Adhesive labels come with
each UDO disk for this purpose (see Figure 3).
Caution: In order to avoid damaging the drives and media:
Only apply labels to the areas designated in Figure 3. Never place labels over
the disk cartridge shutter or open the shutter for any reason.
Make sure the media is free of moisture and that all label corners are securely
fastened to the media shell.
Do not use disks with loosely attached labels.
Do not use disks with multiple labels applied. Always remove old labels before
applying new ones.
A
B
A
Figure 3: Labeling an UDO disk
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
19
Operations
Write-protecting an UDO disk
Each side of an UDO disk can be write-protected.
With rewritable disks, this prevents existing files from being altered or erased, and
new files from being written to the disk.
With WORM disks, existing files cannot be altered or erased regardless of whether
or not the disks have been write-protected. However, write-protecting a WORM
disk prevents additional files from being written to the disk.
To write-protect an UDO disk, slide the red write-protect switch to the left, as
indicated by the arrow on the cartridge (see Figure 4).
Write-protect switch
Figure 4: Write-protecting an UDO disk
20
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
Loading a disk into the drive
Note: Label all disks before loading them into the jukebox. Some application software
packages require that you load and eject disks by using instructions in the software. If
you use a software application to manage files in the jukebox, check the software
documentation before proceeding with these steps.
1. Start with READY, or LOAD*displaying on the control panel.
2. Load UDO media into the drive by inserting the disk gently but firmly into the
mailslot, shutter end first, and with the side you want to access facing up (A or
B). See Figure 5.
An incorrectly inserted disk will be rejected with CARTIN WRONG
displaying briefly.
Figure 5: Loading media
3. LOAD SLOT #will display, with #flashing to indicate the number of the
first available storage slot in the jukebox. To select this storage slot number,
press LOAD or ENTER. To choose a different storage slot, press NEXT or
PREV until the desired slot number displays, and then press ENTER.
loaded into the storage slot, LOAD *displays. You can now load additional
disks by inserting them into the mailslot and repeating step 3 until you are
finished loading disks.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
21
Operations
5. Press CANCEL to return to the READYstate.
Maintaining UDO media
Follow these guidelines to ensure that your UDO disks remain in good condition.
■
■
■
Do not open the disk’s shutter and touch the disk surface.
Do not store the disk in a dusty location.
Do not store the disk in temperatures outside of 5ºC to 55ºC (41ºF to 122ºF).
■
Do not disassemble the disk.
22
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
■
Do not expose the disk to direct sunlight.
■
Do not drop the disk.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
23
Operations
Using mixed media
Mixed media refers to the option to backup to more than one drive type, such as
MO and UDO, within the same physical jukebox.
General considerations when using mixed media are as follows:
■
■
Some independent software vendor application packages do not support
mixed media. Consult your software provider to verify that your configuration
is supported.
The proper version of HP StorageWorks Library and Tape Tools (L&TT) is
required for diagnostic support. Please see the online quick specs of HP
L&TT for the most up to date information. They can be found at the following
web address.
■
■
When loading media into a mixed media unit, the media will first be moved to
a media test station, where its drive compatibility can be determined, then it
will be moved to its final destination. This drive compatibility information is
reported over SCSI to the application software to identify which disks are
compatible with the installed drives.
In the TEST*control panel menu, an additional test called MEDIA TESTis
available that will move all of the disks in the unit (except those in drives) to
the media test station, then back to their original locations. This test can take
about 15 minutes in a fully loaded unit. This test can be used to establish the
drive compatibility of all of the disks in the unit if this information is thought
to be incorrect. This should only be necessary if disks have been moved
around by hand (during service, for example). During normal operation the
jukebox will automatically keep track of this information.
■
When a disk inventory occurs (by selecting the INIT ELEM STATUSfront
panel command, or through a SCSI command) any disks that are found in the
unit that have an unknown type will be moved into the media test station, then
back to their original location to determine their drive compatibility. Again,
this should only occur if disks are inserted by hand (during service) rather
than through the mailslot. When firmware is downloaded into the jukebox
controller, an initial inventory will occur automatically, and all of the disks
will be checked for their drive compatibility type.
24
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Operations
■
■
Some of the front panel tests will work differently and have different initial
requirements in a mixed media unit. For example, the DRIVE IOtest will
require disks of both types in the unit and will only be able to load disks into
drives of the same type.
MO drives can only accept a SCSI address from 0 to 7.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
25
Operations
Using application software
Note: While HP-UX does provide native file system support for UDO media, this
support is only for rewritable UDO media. Refer to the “Configuration” chapter in the
HP StorageWorks 1000ux/1900ux/2300ux Jukebox Setup Guide that shipped with
this product for more information.
The HP StorageWorks 1000ux/1900ux/2300ux Jukebox supports a variety of
off-the-shelf software packages to manage your storage operations. For the latest
information on which application software packages are compatible with this
product, visit http://www.hp.com/go/udo
.
26
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Control panel features and descriptions
The control panel enables manual control of all jukebox operations using four
buttons and an LED display. The SCSI IDs of the jukebox and its optical drives
can be set and changed, disks may be loaded and ejected, configurations can be
monitored and changed, performance information can be viewed, internal tests
can be run, and the jukebox can be secured from unauthorized use. See Figure 6
2
3
4
1
1
3
Swivel feature
2
4
Activity light
16-character display
Selection buttons
Figure 6: Control panel features
■
■
Swivel feature—The control panel assembly can be rotated either right or left.
Activity light—Lights up differently to indicate status:
— Steady green—Power is on.
— Flashing green—A drive is being accessed.
— Amber—A fault occurred.
■
16-character display—Shows information about the current operation.
28
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
■
Selection buttons—Press to perform the operations:
— CANCEL cancels the current operation or menu selection.
— PREV scrolls the display choice backwards by one.
— NEXT scrolls the display choice forward by one.
— ENTER selects the displayed choice.
Using selection buttons
Use the CANCEL, PREV, NEXT, and ENTER buttons to select tasks you want
the jukebox to perform. Each time you push the NEXT or PREV button, a task
choice appears. An “*” indicates that there is a menu beneath that choice, which
you can access by pressing the ENTER button.
Tip: To scroll through the menu options more quickly, push and hold the NEXT or PREV
button.
You can return to READY at any time by pressing CANCEL. In some cases, you
may need to press CANCEL more than once.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
29
Navigation
Jukebox menu tree
Figure 7 provides an overview of the jukebox menu tree.
PREV/NEXT
PREV/NEXT
PREV/NEXT
ADMIN*
LOAD*
EJECT*
READY
ENTER
PSWD 000 000 000
LOAD SLOT #
EJECT SLOT #
ENTER
PREV/NEXT
PREV/NEXT
ENTER
ENTER
PREV/NEXT
TEST*
INFO*
(service use)
PREV/NEXT
EXCHANGE DEMO
INIT MECHANICS
INIT ELEM STATUS
MAGAZINE IO
DRIVE IO
REVISION
CONFIG*
SCSI IDS*
JUKEBOX*
PRODUCT #
SN ###
FWTYPE xxx
DRIVES #
SLOTS ##
RECOVERY ON/OFF
RESTORE DEFAULTS
CLEAR ODOMETERS
DUAL PICKER ON/OFF
STARWARS ON/OFF
NEW PASSWORD
JKBX ID #
DRV 1 ID #
DRV 2 ID #
MAILSLOT IO
.
JKBX ODOMETERS*
HOURS
VERTICAL TEST
.
.
TRANSLATE TEST
FLIP TEST
MOVES
FLIPS
SCSI LOG ON/OFF
SECURE ON/OFF
UPDATE
XLATES
PICKER TEST
ROTATES
FIND PLUNGE HOME
FINF VERT HOME
FIND XLATE HOME
VERTICAL ENCODER
EMPTY DRIVES
SECURE MAIL OUT/IN
DRIVE LOADS*
POWER SECURE
ON/OFF
DRIVE #
•
REP RECOVERED
ON/OFF
DRIVE FW*
D# REV x.
CONF40 ON/OFF
•
EMPTY PICKER
DRIVE SN*
D# ####
FILL PICKER
EXERCISE MECH
WELLNESS TEST
CLEAR SOFT LOG
CLEAR HARD LOG
PLUNGE FULL SPD
PLUNGE 1/2 SPD
PLUNGE 1/4 SPD
MAILSLOT SENSORS
STARWARS
•
HARD ERRORS*
HARDWARE ERR #
FRU 1-3 #
MOTION <NAME>
SOURCE#
DESTINATION 1 #
DESTINATION 2 #
ODOMETER #
MICROMOVE 1-6 #
MICRONOVE ER #
TOP/BOTTOM PICKER
NORTH/SOUTH THUMB
BOTTOM THUMB
TOP THUMB
SOFT ERRORS*
TRANSLATE SENSOR
(same logs available as
under "HARD ERRORS")
RECOVERY ERRORS*
(same logs available as
under "HARD ERRORS")
Figure 7: Jukebox menu tree
30
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Top-level menus
The jukebox has four top-level menus.
READY
Indicates that jukebox is ready for operation.
ADMIN *
Provides access to second-level menu choices. A
password is needed to access these choices.
Note: A default password of “000 000 000” is set at the
factory.
LOAD *
Used to load disks into the jukebox mailslot.
Used to eject disks from the jukebox mailslot.
EJECT *
Note: An “*” indicates that there are multiple choices available for the displayed menu
item. When an item is flashing, press ENTER to select it, or PREV or NEXT to display
additional choices.
Second-level menus
The jukebox has four second-level menus.
TEST *
Runs internal tests.
Note: Internal tests should primarily be run by service
personnel. Only run a test when your service representative
requests that you do.
INFO *
Retrieves performance information stored in the
jukebox logs.
CONFIG *
Customizes the way the jukebox functions.
SCSI IDs *
Displays SCSI IDs and allows you to change them.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
31
Navigation
Note: An “*” indicates that there are multiple choices available for the displayed menu
item. When an item is flashing, press ENTER to select it, or PREV or NEXT to display
additional choices.
32
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Control panel operations
■
■
■
■
■
■
■
■
Configuring the jukebox, page 37
Setting an operating configuration, page 39
Retrieving log history, page 40
Running an internal test, page 44
Note: For information on loading a disk, see “Loading a disk into the drive” on
page 21.
Ejecting a disk
Note: Some application software packages require that you load and eject disks by
following the instructions in the software. If you use application software to manage
files in the jukebox, check the software documentation before proceeding with these
steps.
1. With READYdisplaying on the control panel, press NEXT until EJECT *
displays, and then press ENTER.
2. EJECT SLOT #displays, with the “#” flashing to indicate the first storage
slot in the jukebox that contains a disk.
■
To select the storage slot number that shows in the display, press
ENTER.
■
To choose a different storage slot, press NEXT or PREV until the desired
EJECTINGdisplays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to EJECT SLOT #.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
33
Navigation
3. Remove the disk from the mailslot.
You can now eject additional disks by pressing ENTER and then following
step 1 through step 3 until you are finished ejecting the disks.
Note: When the last disk is ejected, EMPTYdisplays briefly before returning to
EJECT *.
4. Press CANCEL to return to the READYstate.
Entering the administration menu password
READY > ADMIN* > PSWD 000 000 000
ADMIN*menu of the jukebox. The jukebox ships with a factory default password
setting of 000 000 000.
Note: To change the administration menu password, see “Changing the administration
menu password” on page 35.
To access administration menu options using the factory default password:
1. With READYdisplaying on the control panel, press NEXT until ADMIN*
displays.
2. Press ENTER. PSWD000000000displays and the first set of three zeros
flashes.
■
If the default password 000000000is still in effect, you can accept this
password by pressing ENTER three times (once for each set of three
zeros). TEST*displays, indicating that the password was accepted. You
are now in the menu tree below ADMIN*.
■
If you have already changed the password from the factory setting, then
continue with the following steps.
then press ENTER. The middle set of three zeros flashes.
4. Press NEXT or PREV until the second number of your password displays
and then press ENTER. The third set of three zeros flashes.
34
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
5. Press NEXT or PREV until the third number of your password displays and
then press ENTER. TEST *displays, indicating that the password was
accepted. You are now in the menu tree below ADMIN*.
Changing the administration menu password
READY > ADMIN* > PSWD 000 000 000 >CONFIG*
To protect the system from unauthorized access, change the password from the
factory default setting:
1. With READYdisplaying on the control panel, press NEXT until ADMIN*
displays, then press ENTER and enter the password.
2. TEST *displays, indicating that the password was accepted. Press NEXT
until CONFIG *displays and then press ENTER.
3. Press NEXT or PREV or until NEW PASSWORDdisplays and then press
ENTER.
4. NEW000000000displays and the first set of three zeros flashes. Press
NEXT or PREV until the new number you want to assign to the first part of
the password displays and then press ENTER. The second set of three zeros
flashes.
5. Press NEXT or PREV until the new number you want to assign to the second
part of the password displays and then press ENTER. The third set of three
zeros flashes.
6. Press NEXT or PREV until the new number you want to assign to the third
part of the password displays and then press ENTER.
7. PASSWORDCHANGEDdisplays. Press CANCEL three times to return to
READY.
8. Power off the jukebox, then power it back on to save the password to the
jukebox flash ROM.
Note: Be sure to document your new password. If you forget it, contact your service
representative to reset the security code to the factory default.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
35
Navigation
Viewing the current SCSI IDs
READY > ADMIN* > SCSI IDS > VIEW IDS >
To view current SCSI IDs:
1. With READYdisplaying on the control panel, press NEXT until ADMIN*
displays and then press ENTER.
2. Enter the administration password (see “Entering the administration menu
password” on page 34).
3. Press NEXT until SCSIIDSdisplays and then press ENTER.
4. JKBX ID yyor DRIVE xx ID yyis displayed. Press NEXT or PREV to
scroll through the current SCSI IDs.
5. Press CANCEL to exit.
Default SCSI IDs
Table 3 lists the default SCSI IDs for the jukebox and drives
.
Table 3: Default SCSI IDs
Bus 1
ID
Jukebox
6
5
4
3
2
Drive 1
Drive 2
Drive 3
Drive 4
36
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Changing the current SCSI IDs
READY > ADMIN* > SCSI IDS >
To change the SCSI IDs:
1. Follow the instruction in “Viewing the current SCSI IDs” on page 36 until the
list of SCSI IDs is displayed.
2. Press NEXT until the setting you want to change displays, and then press
ENTER. The ID begins flashing.
3. Press NEXT or PREV until the new ID that you want displays and then press
ENTER.
4. Repeat step 2 and step 3 until you have changed all the IDs that need to be
updated.
5. Press NEXT until UPDATEdisplays, and then press ENTER.
6. UPDATEor WAIT FOR UPDATE and then IDS SAVEDdisplays briefly.
— If the new settings do not conflict with other SCSI IDs on the bus, SCSI
IDSdisplays.
— If the new settings conflict with other IDs on the SCSI bus,
CONFLICT-ABORTEDdisplays briefly and then VIEW IDSdisplays.
Any changes entered are lost, and you must repeat the above steps to set a
new ID.
7. Press CANCEL until READYdisplays.
8. Power off the jukebox and then power it back on to save the IDs to the
jukebox flash ROM.
Configuring the jukebox
You can set configurations to customize the way the jukebox operates. Table 5
lists the jukebox configuration options.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
37
Navigation
Table 5: Configuration options
Configuration Name
Description
Default
RECOVERY ON/OFF
Toggles between ON and OFF. If the configuration is set RECOVERY ON
to ON, the jukebox attempts to recover from errors; if the
configuration is set to OFF, the jukebox immediately
stops moving if an error condition occurs. The default
configuration is RECOVERY ON, and recovery should
remain ON under normal conditions.
RESTORE DEFAULTS Sets all jukebox configurations to default settings.
NA
NA
CLEAR ODOMETERS
Sets all jukebox odometers to zero.
Note: Used by service personnel only.
DUAL PICKER
ON/OFF
Toggles between ONand OFF. (The default setting is
DUAL PICKER ON, and dual picker mode should
remain ONunder normal conditions.) If the
DUALPICKER
ON
configuration is set to ON, the jukebox runs with dual
picker (disk transport) addressing ON; if the
configuration is set to OFF, the jukebox runs with dual
picker (disk transport) addressing OFF.
STARWARS ON/OFF
Should be set to ONduring normal operation. Toggles
between ONand OFF.The ONconfiguration enables
the vertical sensors; the OFFconfiguration disables the
vertical sensors.
STARWARS ON
Note: Used by service personnel only.
NEW PASSWORD
Allows you to change the numerical password required 000-000-000
to access the menu choices under the ADMIN*menu on
the jukebox control panel.
SCSI LOG ON/OFF
Should be set to OFFduring normal operation. Toggles SCSI LOG
between ONand OFF. Tracks internal SCSI states and
OFF
saves the information to a log.
Note: Used by service personnel only.
SECURE MS ON/OFF Toggles between ONand OFF. The ONconfiguration
disables loading and ejecting disks. The OFF
SECURE MS
OFF
configuration enables loading and ejecting disks.
38
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Configuration Name
Description
Default
SECURE MAIL
OUT/IN
Toggles between OUT and IN. Determines the
orientation of the mailslot when the SECURE
configuration is set to IN. When set to OUT, the mailslot
remains in its normal orientation. When set to IN, the
mailslot rotates in, making it inaccessible.
OUT
POWER SECURE
ON/OFF
Toggles between ONand OFF. The ONconfiguration
POWER
retains your selection of the SECURE MSconfiguration SECURE OFF
through power cycling (or power outage). The OFF
configuration allows the jukebox to return to the default
setting of this configuration after a power cycling.
REP RECOVERED
ON/OFF
Toggles between ONand OFF. When set to ON,
recovered errors are reported; when set to OFF,
recovered errors are not reported.
REP
RECOVERED
ON
CONF40 ON/OFF
NA
Caution: Changing this configuration may
result in a service call. Used by service
personnel only.
Setting an operating configuration
READY > ADMIN* > CONFIG*
To set an operating configuration:
1. With READYdisplaying on the control panel, press NEXT until ADMIN*
displays.
2. Enter the administration password (see “Entering the administration menu
password” on page 34).
3. TEST*displays. Press NEXT until CONFIG*displays and then press
ENTER.
4. Press NEXT or PREV until the name of the configuration you want to set
displays and then press ENTER.
If the configuration has multiple settings, the current setting flashes. Proceed
to step 5. Otherwise, the configuration is set and a confirmation message
displays.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
39
Navigation
5. If the current configuration setting is flashing, press NEXT or PREV until the
desired setting displays, and then press ENTER. OPTION SAVEDdisplays
and then the configuration’s name and setting displays, indicating that the
configuration is set.
6. Press CANCEL to return to READY.
7. Power off the jukebox and then power it back on to save the configuration to
the jukebox flash ROM.
Retrieving log history
READY > ADMIN* > INFO*
To display information stored in the jukebox operating logs:
1. With READYdisplaying on the control panel, press NEXT until ADMIN*
displays.
2. Enter the administration password (see “Entering the administration menu
password” on page 34).
3. TEST* displays. Press NEXT until INFO*displays, and then press ENTER.
4. Press NEXT until the name of the log you want to access displays and then
press ENTER.
5. After you are finished viewing log information, press CANCEL to return to
READY.
40
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Information logs are described in Table 6.
Table 6: Information logs
Log name
Description
Jukebox firmware version number.
REVISION
JUKEBOX*
Pressing ENTER allows you to select from the
following:
Product identification string
Serial number of the unit.
■ PRODUCT #
■ SN #
For factory use only. Code that identifies the type
of firmware used in the unit.
■ FW TYPE ##
Number of drives in the unit.
■ DRIVES #
■ SLOTS #
Number of storage slots in the unit.
Pressing ENTER allows you to select from the
JKBX ODOMETERS*
following:
Number of operation hours (time the power was
on). Some of the time may be while in power
reduction mode.
■ HOURS
Total moves and move attempts by the disk
transport mechanism.
■ MOVES
Total disk transport mechanism flips.
■ FLIPS
Total disk transport mechanism horizontal
moves.
■ XLATES
Total mailslot rotations.
■ ROTATES
Pressing ENTER allows you to select from the
DRIVE LOADS*
following:
Total disk loads for the drive numbered “#.”
■ DRIVE #
Press ENTER to select the logs under this
■ DRIVE FW*
selection.
■ DRIVE SN*
Press ENTER to select the logs under this
selection.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
41
Navigation
Table 6: Information logs (Continued)
Log name
Description
Log of unrecoverable errors (commands that did
not successfully complete). Returns either NO
HARD ENTRIESor ENTRY #. (There may be
multiple hard error numbers.)
HARD ERROR*
Press ENTER to view the log for the currently
displayed error, or press NEXT to select the next
error.
Log of recovered errors (commands that did not
complete successfully). Returns either NO SOFT
ENTRIESor ENTRY #. (There may be multiple
soft error numbers.)
SOFT ERROR*
Press ENTER to view the log for the currently
displayed error, or press NEXT to select the next
error.
Log of errors during the most recent move.
Returns either NO ENTRIESor the number of
recovery errors.
RECOVERY ERROR*
Press ENTER to view the log for the currently
displayed error, or press NEXT to select the next
error.
*
Internal diagnostics error number for the failure.
■ HARDWARE ERR #
Note: FRUs are listed to show where to focus the troubleshooting efforts. The FRUs
are not listed to suggest that the components need replacement.
Field replaceable unit most likely to be at fault.
— *FRU 1 #
*
Field replaceable unit second most likely to be at
fault.
— FRU 2 #
*
Field replaceable unit third most likely to be at
fault.
— FRU 3 #
42
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Table 6: Information logs (Continued)
Log name
Description
<name> indicates one of the following types of
movements taking place in the jukebox at the
time of the failure:
— MOTION
<name>
■ EXCHANGE
■ MOVE
■ POSITION
■ INIT ELEM
■ REZERO
■ ROTATE
■ DIAGNOSTIC
■ RESTORE
SCSI element number to which the source refers.
(This information is valid for MOVE, EXCHANGE,
and POSITIONmovements only.)
— SOURCE #
SCSI element to which the first destination refers.
(This information is valid for MOVEand
EXCHANGEmovements only.)
— DESTINATION
1 #
SCSI element to which the second destination
refers. (This information is valid for the
EXCHANGEmovement only.)
— DESTINATION
2 #
Move number in which the error occurred.
— ODOMETER #
*
First jukebox micro-move for the original move
command issued prior to the failure.
— MICROMOVE 1
#
*
Second jukebox micro-move for the original
move command issued prior to the failure.
— MICROMOVE 2
#
*
Third jukebox micro-move for the original move
command issued prior to the failure.
— MICROMOVE 3
#
Fourth jukebox micro-move for the original move
command issued prior to the failure.
— *MICROMOVE 4
#
*
Fifth jukebox micro-move for the original move
command issued prior to the failure.
#
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
43
Navigation
Table 6: Information logs (Continued)
Log name
Description
*
Sixth jukebox micro-move for the original move
command issued prior to the failure. (This is the
last to be logged.)
— MICROMOVE 6
#
Micro-move error that occurred.
■ *MICROMOVE ER #
Displays either TOPor BOTTOMindicating
which side of the disk transport mechanism was
active at the time of the error.
■ TOP or BOTTOM
PICKER
Displays either NORTHor SOUTHindicating
which thumb on the transport mechanism was
active at the time of the error.
■ NORTH or SOUTH
THUMB
Running an internal test
READY > ADMIN* >TEST*
This section describes self-diagnostic tests that are available on the jukebox.
Caution: Diagnostic tests should be run only by an authorized service
representative. Descriptions of the self-diagnostic tests are included in this
manual for information purposes only. If not properly completed, some of the
internal diagnostic tests can corrupt your file system. In some rare instances,
your service representative may request that you run specific tests to provide
information before they come to your site, or you may receive a control panel
message to run a specific test.
1. With READYdisplaying on the control panel, press NEXT until ADMIN*
displays.
2. Enter the administration password (see “Entering the administration menu
password” on page 44).
3. TEST*displays. Press ENTER.
4. Press NEXT until the name of the test you want to run displays and then press
ENTER to start the test.
44
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Note: You may press CANCEL at any time to abort a test. A delay may occur while the
current test loop completes.
Table 7: Internal tests
Test Name
Description
EXCHANGE DEMO Used by service personnel only. Do not run this test if the
jukebox contains disks with file system data on them.
This test moves randomly-chosen optical disks to random
storage slot locations. This test displays FAILif there are no
disks in the jukebox or if all storage slots are full. For best
results, the jukebox should contain as many disks as there
are drives, plus two additional disks. The transport and
mailslot must be empty. For mixed media jukeboxes, this test
requires two disks of each media type (MO and UDO).
INIT MECHANICS
INIT ELEM STATUS
Runs the FIND PLUNGE HOME, FIND VERTICAL HOME,
FIND XLATE HOME, and INIT ELEM STATUStests.
Each test is run one time per test loop.
Physically scans the entire unit to determine which storage
slots contain disks and if the drives contain disks.
This test appears as ISTAT TESTin all control panel error
messages.
MAGAZINE IO
DRIVE IO
Makes a combination of moves with a PASS/FAILresult. It
moves an optical disk from a randomly-chosen full slot to a
randomly-chosen empty slot with a random flip. It then
moves the disk back to its original storage slot with its
original orientation. This test displays FAILif there are no
disks in the jukebox or if all storage slots are full. The drives
and mailslot must be empty.
Makes a combination of moves with a PASS/FAILresult. It
moves an optical disk from a randomly-chosen full slot to a
randomly-chosen drive with a random flip. It then moves the
cartridge back to its original slot with its original orientation.
This test displays FAILif there are no disks in the jukebox or
if all storage slots are full. The drives and mailslot must be
empty. For mixed media jukeboxes, this test requires one
disk of each media type (MO and UDO).
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
45
Navigation
Table 7: Internal tests (Continued)
Test Name
Description
MAILSLOT IO
Makes a combination of moves with a PASS/FAILresult. It
moves an optical disk from the lowest-numbered full slot to
the mailslot with a random flip. It then moves the cartridge
back to its original slot with its original orientation. This test
displays FAILif there are no disks in the jukebox or if all
storage slots are full. The drives and mailslot must be empty.
VERTICAL TEST
Moves the disk transport mechanism up and down the full
length of the rail. Returns PASS/FAIL. No disks are
required.
TRANSLATE TEST
FLIP TEST
Moves the disk transport mechanism from side to side. No
disks are required.
Makes a combination of moves with a PASS/FAILresult.
Flips the disk transport mechanism at various locations. No
disks are required.
PICKER TEST
Flips the disk transport mechanism and switches active
thumbs. No disks are required.
FIND PLUNGE
HOME
Calibrates the disk transport mechanism, establishes the
mechanism’s orientation, and determines the reference
points in the picker travel path. Assumes that the mechanics
and servo system are functional. No disks are required.
FIND VERT HOME
Recalibrates the vertical position of the disk transport
mechanism and verifies that the vertical path is clear. No
disks are required.
FIND XLATE HOME Calibrates the reference points for the side-to-side motion of
the disk transport mechanism. No disks are required.
VERTICAL
Moves the disk transport mechanism down to the lower stop,
moves it back up a short distance, and then moves it back
down. On the second downward motion the number of
digital pulses is counted and verified. Returns PASS/FAIL.
No disks are required.
ENCODER
EMPTY DRIVES
EMPTY PICKER
Used by service personnel only. Do not run this test if the
jukebox contains disks with file system data on them.
Moves disks out of the drive mechanism(s) and returns them
to their home storage slot locations if the locations are
known. If the home storage location is not known, the
jukebox moves the disks into the first available empty storage
slot.
Moves a disk from the disk transport mechanism to its home
storage slot location if that location is known, otherwise the
disk is placed into the first available empty storage slot.
46
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Navigation
Table 7: Internal tests (Continued)
Test Name
Description
FILL PICKER
Used by service personnel only. Do not run this test if the
jukebox contains disks with file system data on them.
Moves a disk into the disk transport mechanism from the first
storage slot containing a disk. This test must be run twice to
fill both containers in the disk transport mechanism.
EXERCISE MECH
WELLNESS TEST
Runs the VERTICAL TEST, TRANSLATE TEST, FLIP
TEST, MAGAZINE IO, DRIVE IO, and MAILSLOT IO
tests. Each test runs one time per test loop.
Checks the general capability of the jukebox. Requires one
loaded disk. The drives, transport, and mailslot must be
empty. Runs INIT MECHANICSand EXERCISE
MECHANICS. Each test runs one time per test loop.
CLEAR SOFT LOG
CLEAR HARD LOG
PLUNGE FULL SPD
PLUNGE 1/2 SPD
Used by service personnel only. Sets the soft error log to
zero.
Used by service personnel only. Sets the hard error log to
zero.
Allows the disk transport mechanics to run at full speed. This
setting should always be used in normal jukebox operation.
Used by service personnel only.
Allows the disk transport mechanics to run at half speed.
PLUNGE 1/4 SPD
Used by service personnel only.
Allows the disk transport mechanics to run at quarter speed.
MAILSLOT
SENSORS
Displays the current state of the mailslot sensors. If a sensor
is not blocked, a “0” is displayed. If a sensor is blocked, an
“*” is displayed. The display automatically updates when the
status changes.
STARWARS
The display shows 0 0 0.
Each “0" indicates one of the paths that the disk transport
mechanism follows in front of each stack of optical disks. If
the path is clear, a “0” displays; if the path is blocked
(because of an optical disk that is not inserted fully into its
storage slot for example), an “*” will be displayed. This
display is automatically updated if the status changes.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
47
Navigation
Table 7: Internal tests (Continued)
Test Name
Description
BOTTOM THUMB
Used by service personnel only.
Reports THUMB A, THUMB B, or NO THUMB. Looks at the
top and bottom thumb sensors and reports whether the
thumbs on the disk transport mechanism are in the forward
or back position. If THUMB Aor THUMB Bis returned, the
specified thumb is the forward position. If NO THUMBis
returned, both thumbs are in the back position.
TOP THUMB
Used by service personnel only.
Reports ONor OFF. Looks at the top thumb sensor which
reports whether or not the thumb that is currently on the top
side of the disk transport mechanism is in the forward
position. If ONis reported the thumb is in the back position;
if OFFis reported the thumb is in the forward position.
TRANSLATE
SENSOR
Reports ONor OFFafter looking at the translate calibration
sensor. Display automatically updates if the status changes.
MEDIA TYPE
This is available only in a mixed-media (MO and UDO) unit.
Moves all of the disks in the jukebox, except those in drives,
to the media test station, then back to their original positions
to determine the drive compatibility of all of the disks.
48
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Troubleshooting
Troubleshooting common problems
If the procedures in Table 8 do not address or resolve your problem, visit
http://www.hp.com/go/udo for additional assistance, or contact HP technical
support (see “Getting help” on page 10).
Table 8: Troubleshooting installation
Problem
Solution
Power
Jukebox will not power on
■
Check that the power indicator light
on the control panel is on. If it is not,
make sure the power switch on the
front panel is on.
■
■
Replace the power cord.
Host computer system does not
Ensure the jukebox is not in an error
or failed state. If so, troubleshoot the
error before continuing.
recognize the jukebox or the drives
■
■
Ensure the jukebox is connected and
powered on. The jukebox must be
on when booting the host computer
for the jukebox to be recognized.
If the jukebox is the last device on
the SCSI bus, check that it has been
terminated and that the maximum
cable length has not been
exceeded.
■
■
Check SCSI ID assignments and
resolve any conflicts.
Ensure you are connected to the
correct SCSI bus type. UDO
jukeboxes are LVDS devices.
■
■
■
■
If using a narrow (8-bit) HBA, make
sure that all addresses are in the
range 0 through 7.
For Windows operating systems, use
the device manager to rediscover
the jukebox.
For HP-UX, use ioscanto verify
that the HBA and attached devices
For other operating systems, refer to
the system administrators guide for
diagnosing missing peripherals.
50
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Troubleshooting
Table 8: Troubleshooting installation (Continued)
Problem
Solution
■
Check that the application software
is compatible with the jukebox.
■
Check that the device is present on
the system using HP StorageWorks
Library & Tape Tools, available from
.
■
Power cycle the jukebox and power
down the host. Wait until the
jukebox completes its power cycle
before powering up the host.
■
■
Power cycle the jukebox.
The power-on selftest failed and
DEVICE FAILEDdisplays
If the power-on test continues to fail,
press ENTER, write down the
displayed error code and a micro
move error, and contact your
support representative.
■
■
Power cycle the jukebox.
Power to the jukebox failed while a disk
was in the drive and the display did not
return to READYafter the power came
back on
If READYdoes not display
(power-on test is unsuccessful),
switch off the power and contact
your support representative.
Caution: Do not move the unit!
Moving the unit risks damaging
the optical drive.
No display messages appear
■
Ensure that the power cord is
connected.
■
■
Ensure that the power switch is on.
Power cycle the jukebox.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
51
Troubleshooting
Table 8: Troubleshooting installation (Continued)
Problem
Solution
Connection
Other SCSI devices no longer work
when the jukebox is installed
■
■
■
■
Check SCSI ID assignments and
resolve any conflicts.
Ensure that the SCSI ID for the HBA
is different from that of the jukebox.
Check for proper SCSI cabling and
termination.
Ensure the maximum cable length
for the bus has not been exceeded
(12 meters for LVDS and 3 meters
for SE).
Media
A disk is stuck in a drive
■
■
See “Ejecting a disk” on page 33.
Attempt to unload the disk using
your application software.
■
If unsuccessful, contact your service
representative.
Cannot write to a disk
■
■
permissions.
Eject the disk and check that the
write-protect tab on each side of the
disk is in the write-enabled position
(see “Write-protecting an UDO
disk” on page 20).
■
If unsuccessful, contact your service
representative.
LOAD ERRORor FAILEDdisplays
■
■
Press CANCEL. Insert the disk into
the mailslot again.
If the light bar on the control panel
is amber, cycle power to the
jukebox. When READYdisplays, try
loading the disk again.
when a disk is inserted into the mailslot
■
If unsuccessful, contact your service
representative.
INCOMPATIBLEdisplays when a disk
An attempt was made to load an
that you use UDO disks in UDO drives,
and MO disks in MO drives.
is loaded.
52
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Troubleshooting
Table 8: Troubleshooting installation (Continued)
Problem
Solution
RESERVEDdisplays when a disk is
The SECURE MSconfiguration is set.
Disks cannot be loaded. To change this
setting, see “Setting an operating
configuration” on page 39.
inserted into the mailslot
MAILSLOT EMPTYdisplays when a
■
Remove and then replace the disk
disk is inserted into the mailslot
fully into the mailslot.
■
If the same error reappears, then the
mailslot sensors are not detecting a
disk and may be defective. Contact
your service representative.
DEST NOW FULLdisplays when a disk The jukebox moved a disk into the slot
is inserted into the mailslot
you chose before your load command
executed.
■
Press CANCEL, select another slot
for the disk, and then reattempt a
load.
■
■
Initiate an INITELEMSTATUS
test (see“Internal tests” on page 45).
TRANSPORT FULL displays when a
The disk transport mechanism
already contains a disk. Refer to
your host and application software
documentation for recovery
procedures.
disk is inserted into the mailslot
■
■
Attempt an EMPTYPICKERtest
(see “Internal tests” on page 45).
If unsuccessful, contact your support
representative.
MAILSLOT SENSOR displays when a
■
■
Remove and then re-insert the disk.
disk is inserted into the mailslot
If unsuccessful, the jukebox mailslot
sensors may have failed. Contact
your service representative.
EJECT ERROR displays when a disk
■
■
Press CANCEL. Attempt to eject the
eject is attempted
disk again.
If the light bar on the control panel
is amber, cycle power to the jukebox
and try to eject the disk again when
■
If there is no disk in the mailslot and
this error message repeats, contact
your service representative.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
53
Troubleshooting
Table 8: Troubleshooting installation (Continued)
Problem
RESERVEDdisplays when a disk eject is The application software reserved the
attempted
element for its use or a security
configuration was set to prevent disk
ejection.
■
See “Setting an operating
configuration” on page 39.
■
Attempt the operation using your
application software.
EMPTY *displays when a disk eject is
This is not an error. There are no disks in
the jukebox.
attempted
TRANSPORT FULLdisplays when a
■
The disk transport mechanism
already contains a disk. Refer to
your host and application software
documentation for recovery
procedures.
disk eject is attempted
■
■
Attempt an EMPTYPICKERtest
(see “Internal tests” on page 45).
If unsuccessful, contact your service
representative.
SOURCE NOW EMPTY displays when a The application software moved the disk
disk eject is attempted
from the slot you chose before your eject
command executed.
■
Press CANCEL. You may have to
wait for the application software to
replace the disk into the slot before
attempting another eject.
■
Initiate an INITELEMSTATUS
test (see“Internal tests” on page 45).
MAILSLOT FULLdisplays when a disk A disk is in the mailslot. To remove the
eject is attempted
disk, select EJECT *, select the slot you
want the disk ejected from again, and
eject the disk.
Operation
Forgot the password
■
■
Enter the default password (000
If unsuccessful, contact your service
representative.
54
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Troubleshooting
Table 8: Troubleshooting installation (Continued)
Problem
Solution
You want to stop a test that is running
Press CANCEL. The current test loop
continues until finished, then the test
stops.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
55
Troubleshooting
Retrieving log history
In addition to the procedures listed in the previous sections, the jukebox log
history may assist in the troubleshooting process. See “Retrieving log history” on
page 40 for more information on how to access the log using the jukebox control
panel.
Running an internal test
If your service representative requests that you run an internal test, see “Running
an internal test” on page 44 for more information on how to access the test options
using the jukebox control panel.
56
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Troubleshooting
Using HP StorageWorks Library and Tape Tools
HP StorageWorks Library and Tape Tools (L&TT) is a robust diagnostic tool for
tape mechanisms, tape automation, magneto-optical and UDO products. L&TT
provides functionality for firmware downloads, verification of device operation,
maintenance procedures, failure analysis, corrective service actions and some
utility functions. Seamless integration is provided with HP’s hardware support
organization through generating and emailing support tickets. The support ticket
delivers a snapshot, or an in-depth view, of the storage system.
L&TT is a free download from the web and deploys in less than five minutes. It is
ideal for customers who want ensured product reliability, self-diagnostics and
faster resolution of device issues.
For more information, visit http://www.hp.com/support/tapetools
.
Figure 8: HP StorageWorks L&TT
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
57
Troubleshooting
58
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Specifications
A
This appendix describes the following:
■
■
■
■
■
Jukebox specifications, page 61
Drive specifications, page 62
Media specifications, page 63
Safety and regulatory specifications, page 64
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
59
Specifications
Environmental specifications
Table 9: Environmental specifications
Characteristic
Temperature
Specification
Operating
10ºC to 32ºC (50ºF to 90ºF)
-40ºC to 60ºC (-40ºF to 140ºF)
10ºC (50ºF) per hour
Non-operating (without media)
Gradient
Transportation (<14 consecutive days)
Humidity
-30ºC to 60ºC (-22ºF to 140ºF)
Operating
10% to 80% RH
5% to 90% RH
Non-operating (without media)
Shock
Non-operating (without media)
Vibration (5 to 500 Hz)
Operating
10 cm tilt, drop test
0.21 g rms
Non-operating (random)
Non-operating (swept-sine)
Power Requirements
Line voltage
2.1 g rms
0.5 g (0 to peak)
100 to 240 VAC
Line frequency
50 to 60 Hz
Power consumption
Energy-saving mode
50 W maximum
Power savings when robotics are inactive
60
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Specifications
Jukebox specifications
Table 10: Jukebox specifications
Characteristic
Specification
General
Average disk exchange time
MSBF (robotics)
Physical
6.5 seconds
2,000,000 swaps
Height
914 mm (36.0 in)
869 mm (33.9 in)
482 mm (19.0 in)
100 kg (220 lb)
127 kg (280 lb)
Width
Depth
Weight (net)
Weight (shipping)
Interface
SCSI interface
Low-voltage differential SCSI (LVDS),
68 pin
Certification
Safety
UL 60950, CSA 60950, EN 60950, IEC
60950
Emissions
Laser
FCC Class A, CISPR 22, Class A
EN 60825-1, CDRH
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
61
Specifications
Drive specifications
Table 11: Drive specifications
Characteristic
Specification
Disk capacity
30 GB
Average seek
35 msec
Rotational speed
■
■
■
2100 RPM +/- 0.5% WORM
1950 RPM +/- 0.5% Rewritable
Data transfer rate (software and system
dependent)
Reads (max. sustained):
— WORM, 7.96 MB/sec
— Rewritable, 7.99 MB/sec
Writes (max. sustained):
■
— WORM, 3.98 MB/sec
— Rewritable, 3.99 MB/sec
Burst (synchronous): 40 MG/sec
■
■
Burst (asynchronous, data in):
6.7 MB/sec
■
Burst (asynchronous, data out):
40 MB/sec
Disk load time
5 sec typical/
3 sec typical
Disk unload time
Read/write compatibility
Read/write UDO 1st generation format
only
Interface type
SCSI LVD (68 pin)
MSBF
750,000 load/unload cycles
20
Read/write error rate (uncorrectable)
Seek error rates
< 1 per 10 bytes read
■
Recoverable: < 1 per 100,000
seeks
■
Hard error seeks: <1 per 10,000
seeks
MO drives and two UDO drives only.
62
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Specifications
Media specifications
Table 12: Media specifications
Rewritable
Specification
Characteristic
WORM Specification
General
Recording capacity
Archival life (recorded)
Shelf life (unrecorded)
Warranty
30 GB
30 GB
50 years
50 years
50 years
50 years
Limited Lifetime Warranty
Limited Lifetime Warranty
Physical
Disk thickness
2.4mm (.1in)
130mm (5.12in)
8192 bytes
2.4mm (.1in)
130mm (5.12in)
8192 bytes
Outer diameter
Bytes per sector
Recording layer
Performance
Phase change
Phase change
Load-unload lifetime
Overwrite capability
Operating Environment
20,000 cycles per side
No
20,000 cycles per side
Yes
Operating humidity range 5ºC to 55ºC, 3% to 85%
RH
5ºC to 55ºC, 3% to 85%
RH
Non-operating (storage)
humidity range
-10ºC to 55ºC, 3% to 90% -10ºC to 55ºC, 3% to
RH 90% RH
Note: This product supports mixed media. The supported configuration includes two
MO drives and two UDO drives only.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
63
Specifications
Safety and regulatory specifications
Table 13: Safety and regulatory specifications
Description
Specification
UL Listed Mark
UL 60950 (standard for safety of
information technology equipment)
TUV GS Mark (Germany)
EN60950, IEC950 (standard for safety
of information technology equipment,
third edition)
CE Marking (European Union)
CUL Mark (Canadian UL)
Low Voltage Directive, 73/23/EEC,
European Union
CAN/CSA 22.2 No. 950 (standard for
safety of information technology
equipment)
Regulatory Series ID Number
N3620N3Z, Class A
64
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Safety and Regulatory
B
This appendix describes the following safety and regulatory information for the
United States, Finland, Sweden, Germany, United Kingdom, European Union,
and Japan:
■
■
■
■
■
■
■
■
■
■
■
■
■
BSMI notice, page 74
Japanese Notice, page 75
Laser Device, page 75
CDRH regulations (USA only), page 76
Note: In addition to the safety information in this appendix, also refer to the HP Safety
Guide that shipped with your product.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
65
Safety and Regulatory
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and
Regulations has established Radio Frequency (RF) emission limits to provide an
interference-free radio frequency spectrum. Many electronic devices, including
computers, generate RF energy incidental to their intended function and are,
therefore, covered by these rules. These rules place computers and related
peripheral devices into two classes, A and B, depending upon their intended
installation. Class A devices are those that may reasonably be expected to be
installed in a business or commercial environment. Class B devices are those that
may reasonably be expected to be installed in a residential environment (that is,
personal computers). The FCC requires devices in both classes to bear a label
indicating the interference potential of the device as well as additional operating
instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into.
Class B devices have an FCC logo or FCC ID on the label. Class A devices do not
have an FCC logo or FCC ID on the label. Once the class of the device is
determined, refer to the following corresponding statement.
Class A Equipment
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
personal expense.
Modifications
The FCC requires the user to be notified that any changes or modifications made
to this device that are not expressly approved by Hewlett-Packard Company may
void the user's authority to operate the equipment.
66
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Safety and Regulatory
Cables
Connections to this device must be made with shielded cables with metallic
RFI/EMI connector hoods in order to maintain compliance with FCC Rules and
Regulations.
Declaration of Conformity for products marked with the FCC logo -
United States only
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
Regulatory Engineer, MS E-200
825 14th Street S.W.
Loveland, CO 80537
Or, call
(970) 898-1738
To identify this product, refer to the Part, Series, or Model number found on the
product.
Canadian Notice (Avis Canadien)
Class A Equipment
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
67
Safety and Regulatory
European Union Notice
Products bearing the CE marking comply with the EMC Directive (89/336/EEC)
and the Low Voltage Directive (73/23/EEC) issued by the Commission of the
European Community and if this product has telecommunication functionality, the
R&TTE Directive (1999/5/EC).
Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards and regulations):
■
■
■
■
■
EN 55022 (CISPR 22) - Electromagnetic Interference
EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) - Electromagnetic Immunity
EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics
EN61000-3-3 (IEC61000-3-3) - Power Line Flicker
EN 60950 (IEC 60950) - Product Safety
EC radio frequency interference statement (Europe only)
WARNING: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
AVERTISEMENT : matériel de classe A. L'utilisation de ce matériel en zone
résidentielle est susceptible de générer des interférences nuisibles, auquel cas
l'utilisateur sera tenu d'y remédier à ses propres frais.
AVVERTENZA: Questo è un prodotto di Classe A. In un ambiente
residenziale, questo prodotto può causare interferenze radio. In tal caso,
68
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Safety and Regulatory
VORSICHT: Dies ist ein Produkt der Klasse A. Bei Betrieb in Wohnräumen
kann dieses Produkt Störungen im Radio- und Fernsehempfang verursachen.
In diesem Fall ist der Benutzer dazu verpflichtet, geeignete Abhilfemaßnahmen
zu treffen.
ADVERTENCIA: este es un producto de clase A. En un entorno doméstico
este producto podría causar interferencias de radio, por lo que el usuario
debe tomar las medidas oportunas.
United Kingdom Telecommunications Act 1984
The Hewlett-Packard UDO products are approved under Approval Number
NS/G/1234/J/100003 for indirect connection to Public Telecommunication
Systems within the United Kingdom.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
69
Safety and Regulatory
Herstellerbescheinigung
Diese Information steht im Zusammenhang mit den Anforderungen der
Maschinenlärn information sverordnung vom 18 Januar 1991.
Schalldruckpegel Lp < 70 dB(A)
■
■
■
am arbeitsplatz
normaler betrieb
nach ISO 7779:1988/EN 27779:1991 (Typprüfung)
English translation of German sound emission directive
This statement is provided to comply with the requirements of the German Sound
Emission Directive, from 18 January 1991.
Sound pressure Lp < 70 dB(A)
■
■
■
at operator position
normal operation
according to ISO 7779: 1988/EN 27779: 1991 (type test)
Turvallisuusyhteenveto
Laserturvallisuus
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Hewlett-Packard optiset levymuistiasemat ovat käyttäjän kannalta turvallisia
luokan 1 laserlaitteita. Normaalissa käytössä levymuistiaseman kotelointi estää
lasersäteen pääsyn laitteen ulkopuolelle.
Laitteen turvallisuusluokka on määritetty standardin EN 60825 mukaisesti.
VAROITUS !
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa
käyttäjän turvallisuusluokan 1 ylittävälle lasersäteilylle.
70
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Safety and Regulatory
VARNING !
Om apparaten används på annat sätt än i bruksanvisning specificerats, kan
användaren utsättas för laserstrålning, som överskrider gränsen för laserklass 1.
Huolto
Hewlett-Packard levymuistiasemien sisällä ei ole käyttäjän huollettavissa olevia
kohteita. Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu
henkilö. Levymuistiaseman sisälle asennettujen luku-/kirjoitusyksiköiden
suojakoteloa ei tule avata huoltotoimenpiteiden yhteydessä.
VARO !
Mikäli luku-/kirjoitusyksikön suojakotelo avataan ja suojalukitus ohitetaan, olet
alttiina lasersäteilylle laitteen ollessa toiminnassa. Älä katso säteeseen.
VARNING !
Om skyddshöljet av den optiska drivmodulen öppnas och spärren urkopplas då
apparaten är i funktion, utsättas användaren för laserstrålning. Betrakta ej strålen.
Tiedot luku-/kirjoitusyksikössä käytettävän laserdiodin säteilyominaisuuksista:
Aallonpituus 660 nm
Teho 60 mW
Turvallisuusluokka 3B
English translation of Finland regulatory information
LASER SAFETY SUMMARY
LASER SAFETY
CLASS 1 LASER PRODUCT
Hewlett-Packard jukeboxes are for user safe class 1 laser products. In normal use
the enclosure of the optical drives prevents the laser beam from escaping outside
of the product.
The jukebox was type approved in Finland for laser safety by the National Board
of Labour Protection. The safety class of the products was defined according to
the resolution No 472/1985 of the Council of State and the standard EN 60825.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
71
Safety and Regulatory
WARNING: The use of the product otherwise than specified in the user’s
manual may expose the user to laser radiation exceeding safety class 1.
AVERTISEMENT : l'utilisation de ce produit de façon non conforme à ce
qui est indiqué dans le manuel de l'utilisateur peut exposer l'utilisateur à des
rayonnements laser dangereux excédant les normes de sécurité établies pour
les matériels appartenant à la Classe 1.
AVVERTENZA: Il mancato rispetto delle indicazioni sull'utilizzo del prodotto
riportate nel manuale dell'utente, potrebbe esporre l'utente a radiazioni laser
superiori alla Classe 1 di sicurezza.
VORSICHT: Bei unsachgemäßer Nutzung des Produkts (nicht gemäß der
Ausführungen im Benutzerhandbuch) kann der Benutzer Laserstrahlung
ausgesetzt werden, die die Grenzwerte der Laserschutzklasseklasse 1
übersteigt.
ADVERTENCIA: un uso del producto distinto de los especificados en
la guía de usuario puede producir una exposición peligrosa del usuario
a las radiaciones superando el nivel de seguridad 1.
72
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Safety and Regulatory
SERVICE
There are no user serviceable parts inside the jukebox. The jukebox products can
be serviced only by qualified service personnel. The optical drive mechanism(s)
installed inside the library system shall not be opened or disassembled during
service.
WARNING: If the enclosure of the optical drive mechanism is opened and the
safety interlock disabled, you may be exposed to the laser radiation when the
drive is operating. Avoid exposure to the beam.
AVERTISEMENT : si le boîtier du mécasnime d'entraînement optique s'ouvre et
que le verrou de sécurité est désactivé, vous risquerez d'être exposé aux rayons
laser lors du fonctionnement de l'unité. Évitez de vous exposer au faisceau.
AVVERTENZA: Se il contenitore del meccanismo dell'unità ottica è aperto
e il meccanismo di blocco di sicurezza è disabilitato, è possibile che l'utente
sia esposto a radiazioni laser durante il funzionamento dell'unità. Evitare
l'esposizione al raggio.
VORSICHT: Wenn das Gehäuse des optischen Laufwerks geöffnet wird und
die Sicherheitssperre deaktiviert ist, können Sie bei Betrieb des Laufwerks
Laserstrahlung ausgesetzt werden. Vermeiden Sie es, sich dem Laserstrahl
auszusetzen.
ADVERTENCIA: si el receptáculo del mecanismo de la unidad óptica se abre
y se desactiva el interbloqueo de seguridad, es posible que se exponga a
la radiación de láser cuando la unidad esté funcionando. Evite la exposición
al rayo.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
73
Safety and Regulatory
Japanese Notice
Laser Device
All HP systems equipped with a laser device comply with safety standards,
including International Electrotechnical Commission (IEC) 825. With specific
regard to the laser, the equipment complies with laser product performance
standards set by government agencies as a Class 1 laser product. The product does
not emit hazardous light; the beam is totally enclosed during all modes of
customer operation and maintenance.
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous radiation:
Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
Allow only HP authorized service technicians to repair the laser device.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
75
Safety and Regulatory
CDRH regulations (USA only)
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketed in the United States. The
labels and artwork shown below indicate compliance with CDRH regulations and
must be attached to laser products marketed in the United States.
WARNING: Use of controls or adjustments, or performing procedures other
than those specified in this manual may result in hazardous laser radiation
exposure.
Note: Complies with 21 CFR Chapter 1 Subchapter J.
Laser Class Information: A black on yellow label which reads, “Class 1 Laser
Product” printed in English, French, German, Finnish, Japanese, and Spanish.
Compliance with International Regulations
All HP systems equipped with laser devices comply with appropriate safety
standards, including IEC825.
76
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Glossary
This glossary defines terms used in this guide or related to this product and is not
Glossary
a comprehensive glossary of computer terms.
Glossary
cartridge
A plastic enclosure that contains an optical disk. The cartridge is labeled “A” or “B” to denote
separate sides of the optical disk. The optical disk is never removed from the cartridge.
driver
A program that allows the operating system to communicate with a peripheral device.
element
A SCSI term for any one of the autochanger components — drive, mailslot, storage slots, or
picker.
jukebox
A term synonymous with optical disk library or autochanger. This type of optical storage device
is often referred to as a “jukebox” because when a file is requested, the disk containing the file
is found, inserted into the drive, and the requested information is sent to the host computer
system, similar to the way a musical jukebox finds a record and moves it to the turntable when a
song is requested.
jukebox controller
The part of the jukebox that controls the sending and receiving of SCSI commands, and controls
the disk transport mechanism.
LAN
Local area network. A group of computers and peripherals physically connected so users can
share hardware and software resources.
mailslot
The area where disks are inserted and removed from the jukebox.
multifunction drive
An optical disk drive that supports both rewritable and WORM optical disks. The drive detects
the disk type by reading a factory-stamped code on the disk, and automatically determines
whether to operate in rewritable or WORM mode.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
77
Glossary
optical disk
A term synonymous with the 5.25-inch optical disk. There are two types of optical disks:
rewritable and WORM.
optical disk library
See jukebox.
rewritable optical
An optical disk technology in which data can be repeatedly written using optical reading and
writing technology.
SCSI
An acronym for the Small Computer Systems Interface.
storage slot
An autochanger element that holds cartridges when the cartridges are not in a drive or not being
ejected through the mailslot.
terminator
A resistor array device used for electrically terminating a SCSI bus. A SCSI bus must be
terminated at its two physical ends. A peripheral device uses a terminator only if it is at the end
of the bus.
ultra density optical
UDO (Ultra Density Optical), like HP's DVD+RW, uses Phase Change technology in order to
achieve increased data density on a 130mm disk. Phase Change technology uses a laser to read
and write from the active layer on the disk. The recording process uses the laser to heat each
data bit to a specific temperature. One temperature allows the bit to form a crystalline
(reflective) mark and a different temperature allows the bit to form an amorphous (less
reflective) mark. Data is read by using a low power laser beam to detect the difference in the
levels of reflectivity recorded on the disk.
write-once or WORM
An additional operating mode available with multifunction drives. When a write-once (WORM)
disk is inserted, the drive will write data, but will not write over data that has been previously
written. This feature is useful for applications that need permanent data security and audit trails.
write-protect
A feature that prevents data from being written to a disk. A write-protect tab is located on both
sides of the optical disk cartridge to enable write-protection on one or both surfaces of the disk.
78
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
related documentation 8
drive specifications 62
A
administration menu password
changing 35
E
environmental specifications 60
authorized reseller, HP 11
B
F
back panel 15
front access panel 14
C
G
changing the SCSI IDs 37
configuration
getting help 10
setting 39
H
control panel 14
conventions
help, obtaining 10
host
document 8
text symbols 9
troubleshooting 50
HP
D
storage web site 11
technical support 10
diagnostic tests
running 44
disks
I
labeling 19
loading 21
internal tests
maintaining 22
rewritable 18, 20
types 18
listing of 45
internal tests, running 44
using 18
WORM 18, 20
write-protecting 20
document
labeling disks 19
Library and Tape Tools 57
loading disks 21
conventions 8
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
79
Index
logs
SCSI IDs
listing of 41
retrieving 24, 40
changing 37
setting 36
service access panel 14
specifications
M
mailslot 14
media
drive 62
labeling 19
loading 21
environmental 60
media 63
maintaining 22
rewritable 18, 20
specifications 63
types 18
switch
power 14
symbols in text 9
using 18
T
WORM 18, 20
write-protecting 20
mixed media 24
technical support, HP 10
tests
running 44
text symbols 9
troubleshooting 50, 52, 57
P
ports, SCSI 15
power
U
receptacle 15
switch 14
troubleshooting 50
W
warning
R
related documentation 8
retrieving log history 40
laser safety 75
web sites
HP storage 11
S
Library and Tape Tools 57
write-protecting disks 20
SCSI bus type 50
80
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
|
