Getting Started
Getting Started
Turning phone on & off
Helpful Functions
Volume control
Use the side keys +/– to adjust the sound volume.
The volume level is indicated on the display. When
a call is in progress, the volume control adjusts the
earpiece volume. When the phone is ringing, the
volume control adjusts the ringer volume.
PhoneEasy
Charging
1
Press and hold
on the top of the phone for
Warning!
345gsm
a few seconds to turn it on/off. It takes several
seconds so keep holding until you hear the sound.
Only use batteries, charger and accessories that have
been approved for use with this particular model.
Connecting other accessories may be dangerous and
may invalidate the phone’s warranty.
Quick Start Guide
Setting the language, time and date
These are all set for you. The menu language will
default to English. See the full manual if you
would like to change this setting.
2
Soft keys
The soft keys
1
To charge the battery, connect the AC power
adapter to a wall socket and to the charging
y
have multiple functions. The
current key function is shown above the soft key on
the display.
The date and time are automatically set to the
local time for the area you are in when the phone
is powered on.
socket
on the upper right side of the phone.
17
It takes approximately 3 hours to fully charge the
battery.
Making a call
is displayed on the screen when charging is
completed.
3
4
Call log
21
20
5
6
1. Enter the phone number.
Answered, missed, and outgoing calls (20) are saved
in a combined call log.
q
L
2. Press
3. Press
Note!
to start the call.
to end the call.
Note!
16
The temperature must be in the range
32°–104°F when charging.
q
1. Press
with no numbers entered on the
15
14
screen.
7
8
There is no dial tone. Simply have the phone turned
on and it is ready for use.
2. Use the arrow keys
/
to scroll
Note!
through the call list.
Before removing the battery cover, turn off the phone
and disconnect the charger.
Receiving a call
= Incoming call
9
q
L
1. Press
2. Press
to answer.
to end the call.
= Outgoing call
13
10
= Missed call
12
11
q
3. Press
to dial the highlighted number or
press Options for the following settings:
Installing the SIM card and battery
Display Symbols
View
Delete
Delete all Delete all calls in the call log
Save Save the number in the Phonebook
Create new Creates new contact in the Phonebook
Show details for the selected call
Delete the call
The SIM card and battery are normally pre-
installed for you. Follow these instructions should
you ever need to access them yourself.
Signal strength
Missed call
The SIM card holder is located behind the battery.
Ring only
Keylock on
1. Remove the battery cover and the battery if it
is already installed.
Update
Update an existent contact in the
Phonebook
Vib & ring
Bluetooth on
2. Insert the SIM card by carefully sliding it into
the holder. Make sure the SIM card’s gold
contacts are facing inward and that the cut-
off corner is pointing upward. Take care not to
scratch or bend the contacts on the SIM card.
3. Insert the battery by sliding it into the battery
compartment with the contacts facing upward
to the right.
18
19
Bluetooth
connected
Vibration only
Key lock
Press and hold
to lock/unlock the keypad.
on the left side of the
*
1. Power on/off
2. Flashlight
12. Microphone
Light only
Battery level
New message
Alarm active
Flashlight
Press and hold
phone to switch the built-in flashlight on/off.
13. # / Silent mode on/off
14. End call
3. Side key (volume)
4. Flashlight key
5. Display
Headset
connected
15. Arrow keys
16. Right soft key
17. Loudspeaker
18. Emergency call key
19. Battery cover
20. Headset socket
21. Charging socket
Headset
4. Replace the battery cover.
6. Left soft key
7. Call key
8. 1 / Voice mail
9. Numeric keypad
10. * / Key lock
11. Charging contacts
When a headset is connected, the internal
microphone in the phone is automatically
disconnected. You can use the answer key (if it
has one) on the headset cable to receive
and end calls.
Attaching a lanyard to the phone
1
The complete User Guide can be downloaded at
OR
2
You may also view helpful how-to videos at
2.
3.
4.
Using Phonebook
Text Messaging
Custom Settings
Useful Tools
The Phonebook can store 100 entries with 3 phone
numbers in each entry.
Creating and sending messages
Silent mode
Alarms
->Menu-> Messages ->Write message
Use Silent to silence your ring tones.
Vibration and key tone settings are unchanged.
Use the Alarm feature to set wake-up calls or help
you keep track of an important time.
Creating a Phonebook entry
1. Type the message you would like to send. See
Text input tips below for help.
2. When message is ready press Done.
Hightlight desired send option and press OK.
3. Enter in phone number to send to or press
Search to select an entry in your Phonebook
and press OK.
Press and hold to activate/deactivate Silent.
#
->Menu->Alarm->Alarms
1. Press Menu, scroll to Phonebook
and
press OK.
Select alarm to edit. Toggle it on/off with the
arrow keys
Turning on an alarm will take you to the edit
screen where you will enter the time you wish the
alarm to sound. After entering the time, select OK
to reach the screen where you can switch between
am and pm.
Changing ring tones
2. Select -New contact- and press Add.
3. Select Name and press Edit.
/
and then select OK.
You can select from 20 different ring tone options
Follow this sequence to reach the ring tone
customization. Selecting a user profile:
4. Enter a name for the contact. Delete with
Clear.
->Menu->Settings->User profiles->
Options->Customize->Tone setup->
OK->Ring tone
Reading an incoming message
When you receive a message while your phone is
on, the screen will display . Press Read to read
the message.
Note! Each time you press a key you will
scroll through the three letter options. Once
the letter you would like is highlighted, pause
for a moment and it will be selected. You can
then begin pressing a key to select the next
letter.
Calculator
->Menu->
Use the arrow keys
/
to scroll between
ring tone options. When you pause on a melody,
you will hear its sound. Once you have found the
ring tone you wish to use, press OK to select.
You can also read messages by accessing the
inbox.
->Menu->Messages->Inbox
The Calculator can perform basic math
operations. Use the arrow keys
/
to
5. Press Done.
scroll between the math options along the
You can use this same process to customize the
tones for your Alarm, text Messages and Keypad.
6. Select Mobile, Home number or Office
number, and enter the phone number, then
press Save.
right and select OK when the proper option is
To read messages you have sent and saved
enter.
->Menu->Messages->Outbox
highlighted.
Display background (wallpaper)
You can select from 8 different display
backgrounds.
L
mode.
7. Press
(repeatedly) to return to standby
Game
->Menu->
->OK
Deleting entries in Phonebook
->Menu->Phonebook->Scroll to desired
entry->Options->Scroll to Delete->OK
Select a game (e.g., Smash), then press OK for
settings.
->Menu->Settings->User setup
->Wallpaper
Select Help to learn how to play each game.
Press Yes to confirm or No to Cancel.
Text input tips
Making a call from the Phonebook
Other Call Options
Additional Information
Each time you press a key you will scroll through
the three letter options. Once the letter you would
like is highlighted, pause for a moment and it will
be selected. You can then begin pressing a key to
select the next letter.
Press the key
Phonebook.
under Name to open the
Voice mail
SOS/911 calls
When the phone is turned on, the right soft key
shows SOS before the SIM card is activated or if
the phone lock is on.
The voice mailbox can be called by pressing and
Use
/
to scroll through the Phonebook.
holding
.
1
Press the send key
highlighted entry.
under Call to dial the
Speed dial
Press * for a list of special characters. Select the
desired character and press OK to enter it.
Press SOS, then Yes to automatically call 911.
Press No to return to the activation screen.
If you pressed Yes by mistake, press Cancel
immediately to cancel the call.
The numerical keys
speed dialing.
and
–
2 9
can be used for
0
Use the + keys – on the side of the phone to
move the cursor within the text you have entered.
Adding speed dial numbers
->Menu->Settings->Speed dial
Press # to switch the text entry between upper
case, lower case and numbers.
As long as the phone is on and you are within
reach of cellular service, you can place an SOS
Select
and press Add.
0
q
call by entering 911 followed by
.
Select an entry from the Phonebook and press OK.
Note!
Repeat to add speed dial entries for keys – .
2 9
Sometimes an emergency call cannot be placed
due to network, environment or interference
issues.
To speed dial an entry, press and hold the
corresponding number key.
Emergency Call key
The Emergency Call key on the back of the phone
will automatically dial up to 5 numbers for you
until someone answers. This can be used as a
easy way to reach a family member or friend if
you need help. The Emergency Call function must
be activated before use. See the full manual at
www.doro.com for instructions.
5.
6.
7.
8.
|