COFFEE MACHINE
Owner’s instructions
READ AND SAVE THESE INSTRUCTIONS
CC100
1
2
3
4
5
6
8
7
4
1 0
9
1 2
1 1
B
A
1 3
1 4
5
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
•
•
•
Read all instructions.
Do not touch hot surfaces. Use handles and knobs.
To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in
water or other liquid.
•
•
Close supervision is necessary when any appliance is used by or near children.
Unplug from the outlet when not in use and before cleaning. Allow to cool before fitting or taking off
parts, and before cleaning the appliance.
•
•
Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged
in any manner. Return the appliance to the nearest authorized service facility for examination, repair or
adjustment.
The use of accessory attachments or spare parts not recommended by the appliance manufacturer may
result in fire, electrical shock or personal injury.
•
•
•
•
•
•
Do not use outdoors.
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electrical burner, or in a heated oven.
To disconnect the appliance, turn any control to “off”, then remove plug from wall outlet.
Do not use the appliance for other than the intended use.
This appliance is for household use only.
SAVE THESE INSTRUCTIONS
SHORT CORD INSTRUCTIONS
-
-
-
A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer
cord.
Longer, detachable power supply cords or extension cords are available and may be used if care is exercised
in their use.
If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating of
the appliance. The longer cord should be arranged so that it will not drape over the counter-top or table top
where it can be pulled on by children or tripped over.
-
Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
6
DESCRIPTION OF APPLIANCE
(See diagram on page 3)
The following terminology will be used continuously
in the following pages
HOW TO SET THE CLOCK
When the coffee machine is connected up to the
domestic power supply for the first time the figures
“0:00” will flash on the display (N):
A. Filter holder
B. Water tank
C. Coffee lid
D. Chlorine filter
E. Boiler cap
F. Steam boiler
G. Steam knob
To set the time of day, proceed as follows:
1. Press the HOUR key for around 2 seconds until
the number of hours on the display increases:
H. Emulsifier
I. Milk tank
J. Coffee measure
K. Anti-spray hood
L. Pipe brush
M. ON/OFF cappuccino switch (steam boiler)
N. Display
2. Before the display stops flashing (after about 5
seconds), set the desired time by repeatedly
pressing the HOUR key (fig. 2). Remember to
choose “AM” or “PM” as appropriate:
O. AUTO key
P. 1-4 cups key
Q. ON/OFF coffee key
R. HOUR key
S. MIN key
T. ON/OFF coffee light
U. 1-4 cups light
V. AUTO light
3. Set the minutes by repeatedly pressing the MIN
key. (The process can be speeded up by keeping
your finger pressed down on the key.)
4. After 5 seconds, the display will stop flashing and
the clock will start to work.
W. OK light
X. ON/OFF cappuccino light (steam boiler)
Y. Coffee filter
Z. Hot plate
If you need to reset the time, press the HOUR key for
about 2 seconds, then set the new time, as described
from point 1 down.
Z1.Water level indicator
Z2.Jug
The time set will not be held in the memory in the
event of a temporary power cut.
HOW TO SET THE DELAYED START (TIMER)
Check that the time of day has been set correctly.
To set the delayed start (the time when you want to
make the coffee), proceed as follows:
1. Press the AUTO key for about 2 seconds until
“0:00” flashes on the display;
2. Before the display stops flashing (after about 5
seconds) set the desired time by repeatedly
pressing the HOUR key.
7
3. Set the minutes by repeatedly pressing the MIN
key.
PREPARING THE COFFEE
•
Fill the jug with cold water up to the level marked,
according to the number of cups of coffee
required (fig. 3).
4. After 5 seconds, the display will stop flashing and
the programmed time will be memorized.
5. Press the AUTO key; the AUTO light will come on
and at the programmed time the machine will
start to make the coffee.
If you wish to change the delayed start time once it
has been set, press the AUTO key for about 2 seconds
before setting a new time as described from point 1
down.
WARNING: never exceed the 10-cup line to
avoid causing water to leak out through the rear
slots in the machine; do not use water which has
been heated, to avoid the machine signalling the
end of the coffee percolation prematurely.
Pour the water into the tank (fig. 4). The amount
of coffee obtained is slightly less than the amount
of water poured into the tank because some of the
water remains in the coffee grounds and some is
lost through steam.
Position the jug on the hotplate (Z), making sure
that the lid is on. The perforations in the lid serve
to preserve the coffee aroma and this is why it is
necessary to lift the jug by the handle side in
order to open it (fig. 3).
Place the coffee in the filter using the measure
supplied and level it off uniformly (fig. 5). As a
general guide, put a level measure of coffee
(about 7 grams) for each cup required (i.e. 10
measures for 10 cups). The amount of coffee to
be used may, however, vary according to
personal taste. Use good quality medium-ground
coffee designed for filter coffee machines.
Close the lid. Press the ON/OFF key; the ON light
will come on (fig. 6) and the machine will begin
to make the coffee. (To make coffee at the pre-set
time press the AUTO key and the AUTO light will
come on.) The coffee will begin to trickle out after
a few seconds; there will be 4 beeps to signal that
the coffee has been made.
•
•
•
Note: at the set time, the machine begins making
the coffee but the steam boiler does not come
on.
AUTO SHUT OFF TIME
The machine is programmed by the maker to keep the
coffee warm for 2 hours after percolation. It is,
however, possible to change this time by proceeding
as follows:
1. Press the ON/OFF coffee key for about 2 seconds
until “2:00” flashes on the display.
2. Modify the desired time by repeatedly pressing
the HOUR key (and also the MIN key if required).
3. After setting the time wait for 5 seconds; when the
display stops flashing the time selected will be
memorized.
Note: if you set “0:00”, the machine keeps the
coffee warm for an unlimited period.
•
SETTING FOR 1-4 CUPS
In order to increase the strength of the coffee and
improve the aroma when fewer than 5 cups are
made, press the 1-4 cups key. The 1-4 cups light will
come on.
CHLORINE FILTER
The filter removes the taste of chlorine from the water.
To fit it, proceed as follows:
It is completely normal for the appliance to emit
steam during coffee percolation and for a few drops
of condensation to form around the lid.
After percolation, the hotplate (Z) keeps the coffee in
the jug warm at the appropriate temperature for 2
hours (to modify this time see the paragraph headed
“AUTO SHUT OFF TIME”).
•
•
•
Remove the chlorine filter from the plastic bag and
rinse it under the tap.
Raise the coffee lid and remove the filter case
from its housing by pulling it upwards (fig. 1).
Open the case by pressing on the special areas
marked “PUSH” and carefully position the filter in
the compartment as shown in fig. 2.
PREPARING CAPPUCCINOS
Filling and switching on the boiler
•
•
Close the case and reinsert it in the housing,
pushing it right down.
After 80 coffee cycles and after every six months
use, the chlorine filter should be replaced. As it is
made of biodegradable material, the filter can be
disposed of along with normal household waste.
•
Unscrew the boiler cap (E) by turning it in an
counterclockwise direction.
•
Fill the jug with a maximum of 170 gr. of water (6
fl. oz.), corresponding to the amount required to
make one coffee (fig. 7).
•
Pour the water slowly into the boiler, first making
sure that the “cappuccino” switch is off and that
the steam knob is turned off (fig. 8).
8
•
•
WARNING: if the boiler is filled when it is hot (for
example when the water runs out while a
cappuccino is being made), only pour in the
amount of water shown above (170 gr.; 6 fl. oz.)
and NEVER try to fill the boiler to the MAX 6 OZ.
line (fig. 8) otherwise the milk will fail to froth
properly.
Suggestion: to make a hotter cappuccino when
more than one cup is required, it is better to pour
one cup of coffee at a time before immediately
filling it with frothed milk, rather than pouring all
the cups of coffee at the same time first and then
filling them with frothed milk..
Before switching the boiler off it is necessary to
clean the red emulsifier, so that it does not become
blocked by the milk when it solidifies: to do so, fill
the milk tank with a little water and turn the steam
knob. In this way the steam cleans all the holes
and emulsifier pipes and empties the internal
circuits of any traces of milk.
Next close the boiler cap by turning it firmly in a
clockwise direction.
•
Note: for safety reasons it is not possible to
unscrew the boiler cap while the boiler is hot as
it turns without unscrewing; if you need to fill the
boiler you should wait until the water contained
in it has been completely used up or until the
boiler has cooled down.
WARNING: to eliminate the “new” smell and above
all to ensure that the appliance functions properly, a
few coffee cycles should be completed without
coffee powder the first time the appliance is used,
and the steam boiler should be washed in the
following way: fill it with water, press the ‘ON/OFF’
cappuccino switch and after 5 minutes turn the
steam knob
Be sure to add water in the boiler only once it is
completely empty.
PREPARING THE MILK FOR CAPPUCCINOS
•
Before dispensing milk, the boiler must be pre-
heated for 10 minutes. Therefore, press the
“CAPPUCCINO” button before preparing coffee;
doing so, the boiler will heat right up.
and leave it on until all the steam has been used up
(about 15 minutes).
•
•
Prepare the coffee as illustrated in the paragraph
headed “PREPARING THE COFFEE” and pour
about 2 fl. oz. (50-60 gr.) of coffee into each cup.
To make a cappuccino, pour into the tank milk
which is neither boiling nor hot. With the tank
filled to the “MAX” line, 2 or 3 cappuccinos can
be made. Never exceed the little mark which is
placed immediately above the word “MAX” (fig.
10) or the milk may continue to drip from the
pipe after the cappuccino has been prepared.
Place the cup containing coffee under the milk
tank pipe, check that the milk tank is firmly
attached, wait for the “OK” pilot lamp (W) to
come on, the turn the steam knob at least a full
turn counter-clockwise. The “frothed” milk will
begin to trickle out of the milk tank pipe (fig. 11).
To avoid the milk splashing if small cups are used,
the anti-spray hood should be fitted on the milk
tank pipe (fig. 12).
Fill the cup with the desired amount of frothed milk.
To ensure that the milk froths properly, always
close the steam knob and wait for the OK pilot
lamp to come on between one cappuccino and the
next. As soon as the tank is empty and the machine
begins to puff, turn off the steam by turning the
steam knob in a clockwise direction.
The following proportions are recommended in
order to obtain a perfect cappuccino: 1/3 coffee,
1/3 hot milk and 1/3 frothed milk.
CLEANING AND MAINTENANCE
Before carrying out any cleaning or maintenance,
disconnect the appliance from the electrical power
supply by pulling out the plug.
Cleaning the milk frother
The milk frother must be cleaned each time after use;
proceed as follows:
•
•
Remove the milk tank by pressing the lever
marked “PRESS” and pulling it upwards at the
same time; wash the tank with hot water.
•
Remove the emulsifier (fig. 13) by pressing on the
lever (A) and pulling it upwards at the same time.
Remove the rubber mixer, especially wash and
clean with warm water the holes shown in fig. 14
(clean them using a needle). Check that the hole
marked with the arrow B is not blocked (fig. 14).
Once they have been cleaned, all the pieces
must be reassembled correctly. Pay attention
that the rubber mixer is firmly pushed down and
the red emulsifier is pushed till you hear click. If
the appliance is not cleaned this way every time
it is used the milk may fail to froth properly or
may fail to be sucked up, or it may drip from the
milk tank pipe.
•
•
Warning: to facilitate the cleaning of the milk tank
pipe, it is possible to use the pipe brush supplied.
9
from the appliance (to avoid them becoming
contaminated with vinegar);
•
pour out a sachet of descaler and 4 cups of
water; dissolve the descaler in the water by
stirring it with a spoon and pour the solution into
the water tank (fig. 4). As an alternative, pour in
2 cups of vinegar;
put the jug on the hotplate and attach the filter
holder without the ground coffee;
press the ON/OFF key and allow the equivalent
of 2 cups to percolate before switching off the
appliance;
leave the solution to take effect for an hour;
turn the machine on again and allow the rest of
the solution to percolate;
rinse by making the appliance work only with
water at least 3 times (1 full jug each time);
if the ON light (T) is still flashing at the end of the
operation, repeat the descaling process.
Warning: never descale the boiler.
Other cleaning
•
•
Clean the jug and filter holder regularly.
Do not use solvents or abrasive detergents when
cleaning the machine"s plastic components. A
soft cloth is sufficient.
•
•
•
NEVER immerse the appliance in water.
DESCALING
The limestone contained in the water will, with the
passing of time, cause obstructions likely to prevent
the coffee machine from working properly, thereby
increasing the time needed to make coffee. The
formation of limestone deposits depends on the
hardness of the water and on how often the machine
is used. To get the best out of your appliance, it is
necessary to descale it from time to time. The coffee
machine is equipped with a system for checking the
quantity of limestone deposits. When these reach a
high level, the ON coffee light (T) will begin to flash:
this means that it is time to descale the coffee part. To
do so, you should proceed as follows:
•
•
•
•
SERVICE AND REPAIR
If the appliance should break down or fail to work
properly, contact your nearest authorized technical
service centre. Repairs carried out by unauthorized
staff will invalidate the guarantee.
•
remove the chlorine filter and the permanent filter
Limited Warranty
What Does This Warranty Cover? We warrant each Espresso Coffee Machine to be free from defects in
material and workmanship. Our obligation under this warranty is limited to replacement or repair, free of charge at
our factory or authorized service centers, of any defective part or parts there of other than parts damaged in transit,
which shall be returned to us, transportation prepaid. This warranty shall apply only if the Espresso Coffee Machine
is used in accordance with the factory directions which accompany it.
How Long Does The Coverage Last? This warranty runs for one year from the date of delivery and applies
only to the original purchaser.
What Does This Warranty Not Cover? This warranty does not cover defects or damage of the Espresso Coffee
Machine which result from repairs or alterations to the machine outside our factory or authorized service centers, nor
shall it apply to any Espresso Coffee Machine which has been subject to abuse, misuse, negligence or accidents.
Also, consequential and incidental damages resulting from the use of this product or arising out of any breach of
contract or breach of this warranty are not recoverable under this warranty. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation may not apply to you.
How Do You Get Service? If repairs become necessary or spare parts are needed, please write to:
DeLonghi America Inc.
625, Washington Avenue
Carlstadt N.J. 07072
or call Service Tel. No. 800-322-3848
The above warranty is in lieu of all other express warranties and representations; All implied warranties are limited
to the applicable warranty period set forth above. This limitation does apply if you enter into an extended warranty
with DeLonghi. Some states do not allow limitations on how long an implied warranty lasts, so the above exclusions
connection with the sale or use of its Espresso Coffee Machine.
How Does State Law Apply? This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
10
|