Casio MA0611 EC User Manual

MA0611-EC  
Operation Guide PQ-60  
3 MIN (DATE) button  
ILLUSTRATION  
Pressing this button while “TIME” is selected by the Mode switch 5 advances the minute setting.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.  
4 HOUR (MONTH) button  
Pressing this button while “TIME” is selected by the Mode switch 5 advances the hour setting.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.  
5 Mode switch  
LOCK: For normal use  
TIME: For adjusting the time setting  
ALARM: For adjusting the alarm setting  
CALENDAR: For adjusting the date setting  
6 Alarm Mode selector  
SNOOZE: Snooze alarm on  
ON: Alarm on  
OFF: Alarm off  
7 Battery  
SETTING THE CLOCK  
1. Slide the Mode switch 5 to “TIME”. This causes the current time to  
flash on the display.  
2. Use the 12/24 (YEAR) button 2, MIN  
Hour  
Minutes  
(DATE) button 3, and HOUR (MONTH)  
button 4 to set the time. Holding down the  
MIN (DATE) button 3 or HOUR (MONTH)  
button 4 changes the corresponding setting  
at high speed.  
Press to toggle between  
12-hour and 24-hour  
timekeeping.  
Press to advance the  
minute setting.  
Make sure you set the correct am/pm time if  
you are using 12-hour timekeeping. The PM  
indicator indicates PM times, while the AM  
indicator indicates AM times.  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
The seconds count automatically reverts to  
00 whenever you finish adjusting the minute  
setting.  
Press to advance the  
hour setting.  
PM indicator  
clock.  
Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the  
illustration.  
3. Slide the Mode switch 5 to “CALENDAR”. This causes the current  
date to flash on the display.  
Alarm Off  
PM indicator  
Snooze Alarm On  
HOUR (MONTH) or MIN (DATE)  
button depressed  
Current time  
(Hour, minutes)  
Alarm indicator  
Snooze on indicator  
4. Use the 12/24 (YEAR) button 2, MIN  
Year  
Press to advance the  
year setting.  
The day of the week is  
adjusted automatically.  
(DATE) button 3, and HOUR (MONTH)  
button 4 to set the date. Holding down any  
button advances the corresponding setting  
at high speed.  
You can set the year in the range of 1990 to  
2030. The day of the week is set  
automatically in accordance with the date  
setting.  
Press to advance the  
day setting.  
Day of the week  
Date (month – day)  
Current  
temperature  
Alarm on indicator  
Alarm time  
Press to advance the  
month setting.  
Month Day  
GENERAL GUIDE  
1 SNOOZE/LIGHT button  
5. Slide the Mode switch 5 to “LOCK”. This will cause the figures on the  
display to stop flashing.  
Press this button to illuminate the display for about five seconds.  
Pressing this button while the alarm is sounding stops the alarm.  
2 12/24 (YEAR) button  
Press this button to toggle between 12-hour and 24-hour timekeeping.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.  
The day of the week is adjusted by the clock automatically in accordance with the date.  
1

Motorola TRIUMPH WX435 User Manual
Melissa 645 088 User Manual
Kompernass KH 2216 User Manual
Hitachi Deskstar HDS721075CLA332 User Manual
Freecom Technologies Network Drive XS User Manual
Franklin Computer Drive U600 User Manual
Asus V66 User Manual
Asus P525 User Manual
Arcam CD62 User Manual
Aluratek AHDU350500 User Manual