Capresso 454 User Manual

Model #454

CoffeeTEAM S

10-cup, 50 oz.

™

Digital Coffee Maker/

Burr Grinder Combination

• Operating Instructions

• Warranty

• Mail-in or Fax-in

Product Registration

™

CONTENTS Capresso CoffeeTEAM S

Page

1a. Welcome and Thank You....................................................4

1b. How to reach Capresso......................................................4

8. Grinding and brewing coffee now ......................................13

8a. Drip Stop / Stop-And-Serve.........................................14

8b. Using different beans at different times.......................15

8c. Using the Coffee Maker without the Grinder...............15

8d. Warmkeeping ...............................................................15

2. Important information about coffee beans

and the built-in Burr Grindcer ..............................................4

2a. Storing coffee beans in the freezer?..............................4

2b. Finer or coarser grind? ..................................................4

2c. Dark beans versus light beans.......................................4

2d. Flavored beans, liquid flavorings, syrups ......................4

2e. Stones and beans ..........................................................5

9. Grinding and Brewing Coffee Later....................................15

10. Cleaning............................................................................16

11. Decalcifying ......................................................................19

12. FAQ (Technical Questions)................................................20

13. FAQ (Coffee Questions)....................................................21

14. Limited Warranty...............................................................22

15. Product Registration.........................................................23

Manual Release Button ..........................................................19

3. PLEASE NEVER....................................................................5

USER COMPONENTS, Fig.1 and Fig. 2.................................6

4. Equipment ............................................................................7

5. Capresso Customer Service ................................................7

6. Features and benefits of the CoffeeTEAM S........................7

WHO IS CAPRESSO?

With more than 20 years experience in coffee equipment for

household use, and after establishing a well-known European

Appliance Company in the U.S., CAPRESSO was founded in

1994. Our goal is to provide coffee equipment for the customer

who wants a better product. Safety, reliability, performance and

convenience are the cornerstones of the CAPRESSO quality. Our

products are available through selected kitchen and coffee spe-

cialty retailers and specialty websites who can give you expert

advice and will treat you as a valued customer. We hope you will

enjoy your new CAPRESSO product and will recommend it to

your friends.

7. Preparing the machine .......................................................8

7.1 Before first use ...................................................................8

7.2 The display .........................................................................8

7.3 Setting the time ..................................................................8

7.4 Grinder setting for current use ...........................................8

7.5 Programming the timer and grinder for later use...............8

7.6 Flashing LCD display..........................................................8

7.7 Filling the beans................................................................10

7.8 Water Filtration System ....................................................10

7.9 Filling the water container ................................................11

7.10 Filter holder insert...........................................................12

7.11 Cover Lid ........................................................................12

ATTENTION: Traces of Coffee

2. Important information about coffee beans and the built-in

burr grinder

2a. Storing Coffee Beans in the Freezer?

In order to ensure proper functioning, your CoffeeTEAM S has

been calibrated and tested with coffee beans. As a result, some

traces of coffee may remain in your machine.

Coffee Stores do not store coffee beans in the freezer or refriger-

ator! Coffee will act like baking soda, absorbing all odors and

tastes surrounding it. Coffee beans will stay fresh for several

weeks as long as you keep them in a dry, dark container. (It’s the

ground coffee which will lose aroma rapidly!) If you must store

coffee beans in the freezer, take them out the day before use.

This way they will absorb less odors and have time to thaw. If you

fill beans from the freezer directly into the grinder, moisture will

seep into the burrs and the feeder channel. The moisture makes

the ground coffee stick in the feeder channel and will clog it up

over time.

1a. Welcome and Thank You

Thank you for choosing this unique CAPRESSO product.

Your new CoffeeTEAM S works differently than individual

coffee makers and grinders. Please read through this book

before using your machine. Thank you.

These operating instructions contain all the information neces-

sary for the correct use, operation, and maintenance of the

machine. Understanding and complying with the directions con-

tained in these operating instructions are essential to ensure that

the machine is utilized without risk and to ensure safety during

operation and maintenance.

2b. Finer Or Coarser Grind?

The four grind settings of your CoffeeTEAM S are calibrated for

grinding drip coffee. Choose the coarser settings for darker, oili-

er beans. Choose the finer settings for light or medium roasts.

In the coarser setting slightly more coffee will pass through the

burrs than in the finer settings.

1b. How To Reach Capresso

Should you require further information or if particular problems

occur that are not covered in this manual, please

• CALL our toll free HELP LINE: 1-800-767-3554 Mon.-Fri.

9AM to 8PM, Sat. 9AM to 5PM EST. If you call at any other

time, please leave a message with your telephone number and

when we can call you back.

• FAX us at 1-201-767-9684

• E-MAIL at [email protected]

• WRITE to Capresso Inc., Customer Service, P. O. Box 775,

Closter, NJ 07624

2c. Dark Beans versus Light Beans

Your CoffeeTEAM S burr grinder is calibrated to work with all dif-

ferent kinds of roasts. Dark, oily beans will leave some oil

residue in the feeder channel. Over time this can slow down the

flow of ground coffee. For cleaning the feeder channel see

pages 17/18.

2d. Flavored beans, liquid flavorings, syrups

• Do not use sugar or powder coated beans in the grinder (e.g.

cinnamon, chocolate, vanilla etc). Coated beans can pit the

bean container. The coating might stick to the burrs and, over time,

will greatly reduce the performance of the grinding mechanism.

• Do not add any liquid flavorings or syrups to the beans.

• If you like flavored beans we recommend buying liquid flavor-

ings at your local coffee store. Add a few drops into the carafe

before or after brewing.

• Never unplug your CoffeeTEAM S in the middle of a

grinding/brewing cycle.

• Never open the water container lid during the brewing process.

• Never grind into the filter holder unless it is empty of previously

used coffee grounds.

2e. Stones And Beans

Every coffee specialty store will tell you that occasionally small

stones can be found in between coffee beans. Very small stones

will be processed through the burr grinder without any harm (the

stone will end up in your filter - not in your brewed coffee).

However, larger stones can block the burr grinder permanently. If

this happens, the grinder will make a loud noise. Push the

On/Off button to stop grinding and call our customer service toll

free number: 1-800-767-3554. Here is how you can avoid stones

entering the bean container:

• Never operate the machine when the feeder channel cover is

removed.

• Shake your bean bag thoroughly so that a stone will fall to the

bottom of the bag.

• Before emptying the bottom half of the bag of beans into the

bean container, check to see whether there are any particles

that look like stones, and remove them.

3. PLEASE, NEVER... (or you will void your warranty

protection):

• Never fill instant coffee into the bean container; it can damage

the functioning of the grinder and the machine.

• Never fill coated coffee beans into the bean container.

• Never fill water or any other liquid into the bean container.

• Never fill anything other than coffee beans into the bean con-

tainer (no chocolate, no nuts, no spices).

• Never fill anything but fresh, cold clean water into the water

container.

• Never remove or attempt to disassemble the bean container.

USER COMPONENTS

Operating Panel

Bean Container Lid

Bean Container

and Display

Fig. 2

Fig. 1

Fineness Selector Dots (not shown)

Screw for Feeder Channel Cover

Feeder Channel Cover with window

Feeder Channel

Operating Panel and Display

Grind Amount Indicator

Clock/Timer

Strength Indicator

On/Off Button with red light

2–4 cup brew cycle selector with

green light

“Auto” Button with green light

Charcoal filter button with green light

h-button to set hours

m-button to set minutes

Programming button

“2-10” button = to set coffee amount to be ground;

changes bold number in the Grind Amount Indicator

strength button: to set coffee strength; saucer

in the Strength Indicator jumps from cup to cup.

Heating Plate

Water Container Lid

Hot Water Guard, not shown (see page 12)

Water Filtration Container

Cover Lid

Filter Holder Insert

Drip Stop

Filter Holder

Glass Carafe with snap-on lid

Manual filter holder release button (see page 19)

G10

G11

G10

G12

G11

G12

4. Equipment

• In case the filter holder is moved inadvertently underneath the

grinder, a special release disengages the filter holder and

returns it to its original position.

• Cold water filtration system removes up to 82% chlorine and

improves the taste of the coffee.

• A flashing green indicator light shows when it is time to

replace the charcoal filter cartridge.

• Drip-stop function lets you pull out carafe and serve a cup or

two before brewing is finished.

• 900 watt heating system delivers 200º to 205º F contact/brew

temperature and 180º F in carafe after brewing.

• A special 2-4 cup cycle slows down the brewing process to

maintain flavor and aroma when brewing small batches.

• Easy to read LCD display with AM/PM clock and 24-hour

programming .

The CoffeeTEAM S (#454) comes with:

a. this instruction book (includes warranty and Capresso product

registration)

b. an order form for parts and accessories

c. one measuring scoop

d. one glass carafe with lid

e. one GoldTone filter, size 4

f. one cover lid for the filter holder insert

g. filter holder insert

h. water filtration container with detachable bottom

i. charcoal water filter cartridge

If any of these parts are missing, please call toll-free:

1-800-767-3554.

• Auto shut-off keeps coffee hot for two hours, then turns

machine off for additional safety.

• Machine can be used with or without the grinder to accom-

modate pre-ground coffee.

• GoldTone filter included.

• 10-cup (50 oz.) capacity.

5. Special CoffeeTEAM Capresso Customer Service

We want you to be completely satisfied with your CoffeeTEAM S.

If you need any assistance, call our toll free number

1-800-767-3554 or email us at [email protected] or fax us

at 201-767-9684. During the warranty period (12 months) our

special CoffeeTEAM Service provides the following free of

charge (within the continental United States):

• Free replacement of any broken part (except glass carafe) and

free ground shipping.

• Free repair of your CoffeeTEAM including free UPS ground

shipping both ways. We will send you a UPS ARS (authorized

return service) label, so you don't have to pay for the UPS

shipping when you send the product for repair. (For faster service,

UPS 2nd day air, there will be a charge of $15.00).

Burr Grinder Features

• Heavy duty, commercial mill with burr/cone grinder delivers

slow, precise and no-heat grinding to preserve natural coffee

bean aroma.

• Built-in safety device prevents grinding if filter holder is not in

grinding position.

• Grinds directly into filter holder.

• 150g bean container holds beans for 20 to 30 cups of coffee.

• Set to grind for 2, 4, 6, 8 or 10 cups. (Indicator in LCD display.)

• Fine tune for mild, regular or strong coffee. (Cup/saucer

indicator in LCD display.)

• Turn the bean container from left to right to change the grind

settings from finer to coarser in four steps.

6. Features and benefits of the CoffeeTEAM S

Coffee Maker Features

• After grinding, CoffeeTEAM S automatically returns the

filter holder and starts the brewing process.

7.3 Setting The Time

7. Preparing the machine

7.1 Before First Use

a. After unpacking clean all

loose parts with warm water

and make yourself familiar with

the different functions.

b. After reading the instructions,

brew 3 cups of water to clean

all internal parts and to activate

the charcoal filter.

Push and hold the "h"-button (G8)

to set the hour. Then push and

hold the "m"-button (G9) to set the

minutes. Now the time is set. To

change the actual time, repeat

above steps.

7.4 Grinder Setting for Current Use

a. Push and hold the "2-10" button

(G11). The bold number in the

Grind Amount Indicator (G1) will

change. When the desired num-

ber is bold, release the button.

b. Push and hold the "strength"

button (G12). The saucer will

jump from cup to cup. When

the

7.2 The Display

When you plug in the coffee

maker, the LCD displays AM and a

flashing “12:00.” The “Grind

Amount Indicator” (G1) shows the

number “10” bold and the num-

bers 2, 4, 6, 8 outlined. The

saucer sits under the desired

cup, release the button.

c. To change any of these settings,

repeat above steps.

“Strength Indicator” (G3) shows

three cups, one outlined on the left

(stands for mild), one shaded in

the middle (stands for regular), and

one black on the right (stands for

strong). The saucer sits under the

middle cup (regular). The green

filter light is illuminated (G7). This

is the factory setting.

7.5 Programming The Timer And

Grinder For Later Use

To program the grinder and coffee

maker to start automatically at a

pre-set time proceed as follows:

a. Make sure the current time is set.

e. If you wish to check the pro-

grammed settings, push the

"prog" button (G10). The display

will show you the future time

and the future grinder settings.

b. Push the "prog" button (G10).

The saucer blinks. The display

will read "AM 12:00" and shows

the number "10" in bold.

c. Push and hold the”h”-button

(G8) to program the hour at

which you would like to make

coffee later. Push and hold the

“m”-button (G9) to program

the minutes at which you would

like to make coffee later. Now

the time to make coffee later is

programmed.

d. Push and hold the "2-10" button

(G11) until the desired number is

displayed in bold. Release this

button. Then push and hold the

"strength" button (G12) until the

saucer sits under the desired

cup. Release this button.

Note: The settings for the grinder

can be different in the program

mode and in the regular (current)

mode.

Note: If you want your coffee

ready at 7:00 AM, set the timer to

6:45 AM.

See chapter 9, page 16 for

"Grinding and Brewing Coffee

Later".

Note: Within 5 seconds the dis-

play will return to the current

mode and the current grinder

settings. To check if you are in

the programming mode or in the

current mode just look at the

saucer. If the saucer is not blink-

ing you are in the current mode.

If the saucer is blinking you are

in the programming mode.

container.

Caution: Check beans for foreign

objects (see page 5, chapter 2e).

The bean container will hold

approximately 6 oz. (1/3 lb.) of

beans (good for 20 to 30 cups of

coffee). Select the fineness setting

until the line matches up with one

of the four dots in front of the

bean container. For first time use,

we recommend the coarsest set-

ting - the largest dot.

7.6 Flashing LCD Display

• If you unplug the machine for

more than 10 seconds and then

plug it in again, the LCD display

will flash.

• If you did not unplug the

machine and the LCD display

flashes, it indicates that the

electrical power was interrupted

for more than 10 seconds. You

have to set the clock and the

timer and grinder settings again

as described in chapters 7.3

through 7.5.

• If you unplug the machine for

less than 10 seconds all infor-

mation will be maintained (time,

grinder settings, etc.).

Note: When you unplug the

machine, the display will discharge

for about 15 seconds. At this time

it will show random symbols and

then turn off.

Note: Never fill the bean container

with frozen or coated beans (see

chapters 2a and 2d, page 4).

7.8 Water Filtration System

Your CoffeeTEAM S comes with a

cold water filtration kit. This kit

contains:

• one charcoal cartridge, and

• a filtration container with a

detachable bottom.

You can use your coffee maker

with or without the water filtration

system.

Note: If you use distilled, spring or

bottled water or if your water has

little or no chlorine you might not

7.7 Filling the Beans

Fill the bean container (B) with

beans. Make sure that the water

container lid is closed to prevent

beans from spilling into the water

brewings.

find a difference in taste in your

coffee when using the water filtra-

tion system. However, most tap

water is treated with chlorine. The

water filter cartridge removes up to

82% of the chlorine found in your

tap water.

The green charcoal filter light will

start blinking either after 6 weeks

or after the On/Off Button has

been turned on 60 times whichever

comes first, reminding you to

replace the cartridge.

Initial Preparation:

• Unscrew the bottom of the

filtration container (K) and place

the cartridge (flat side upwards)

inside. Replace the bottom of

the filtration container.

Attention: When you unplug the machine for more than 10 sec-

onds or if you have a power failure, the electronic indicator loses

its memory. Then it is best to replace the filter 6 weeks after first

use.

Caution: Once the cartridge is activated you should never use it

for longer than six weeks. Harmful bacteria build-up may occur.

Unused cartridges can be stored indefinitely.

Replacement cartridges are available through your local

Capresso dealer or by using the enclosed mail order form or

through the website: www.capresso.com.

• Place the filtration container into

the water container.

• Fill two to three cups of water

into the filtration container and

let sit for two to three minutes.

Then turn the machine on and

let the water brew into the

carafe. Discard the water and

turn the machine off. This will

activate the charcoal filter.

• For best results always fill the

water through the filtration con-

tainer.

Replacing the Cartridge / Resetting the Filter Indicator

Remove the filtration container, unscrew the bottom, remove and

discard the used filter. Replace with new filter and activate filter.

While the green light is still blinking, push and hold the Charcoal

Filter Button for a three seconds until the light stops blinking and

is illuminated again. Now the indicator starts counting anew.

When to replace the cartridge:

As long as the green Charcoal Filter

Light is on, the CoffeeTEAM S

monitors time and the number of

to properly lock the filter holder

insert into the filter holder:

• Open the water container lid.

• Remove the cover lid.

7.9 Filling The Water Container

Open the water container lid (I)

and pour the desired amount of

fresh, cold water through the filtra-

tion container (K). Note: Using the

cup graduation on the glass carafe,

always pour approximately one

cup of water more into the water

container to compensate for water

lost during the brewing process.

Maximum amount of cold water:

approximately 1/4 inch above the

10-cup marking on the glass

carafe.

• Remove the glass carafe from

the heating plate and then lower

the filter holder insert (M) with

the tab of the filter holder insert

pointing towards the water con-

tainer. Push the handle of the

filter holder insert down towards

the water container and make

sure it sits completely flush with

the rim of the filter holder (O).

• Push with your finger against

the drip stop (N). If the filter

holder insert is in the proper

position, it will stay inside the

filter holder and not move

Hot Water Guard

see page 21, question 10

When you have filled the water

container, set the glass carafe

aside (do not set it on the heat-

ing plate (H) yet!).

upwards.

CAUTION: Messy / Dangerous!

7.10 Filter Holder Insert

If you forget to place the filter holder insert (M) in the filter holder

(O) and you slide the filter holder underneath the grinder, it will

start grinding and spread the ground coffee on your counter. It

will then return the filter holder underneath the water container lid

and the brewing process will start, splashing hot water onto

the heating plate. In this case, immediately push the On/Off

button to turn off the machine and wait until the water pump-

ing stops!

Caution: If the filter holder insert

(M) is not completely locked into

the filter holder (O), the drip stop

(N) on the bottom of the filter holder

insert might not open during brew-

ing. This can cause hot coffee to

overflow and can result in serious

injuries and damages. Here is how

Filter

holder

insert

Filter

holder

Always move the filter holder WITH the filter holder insert AND the

GoldTone filter underneath the grinder.

8. GRINDING AND BREWING

COFFEE NOW

7.11 Cover Lid

The cover lid (L) minimizes static

coffee particles clinging to the out-

side of the filter holder.

• Open the water container lid (I).

• Make sure that the filter holder

insert and the GoldTone filter (or

your filter paper) are inserted in

the filter holder (O).

• Place the cover lid on top of the

filter holder insert (M) so that the

large hole is on the left side.

Make sure that the front rim fits

snugly into the groove created

by the filter holder insert and the

outside filter holder.

• Select cup and strength setting

(see page 8, chapter 7.4).

• Fill beans into the bean container

(see page 10, chapter 7.7).

• Fill water into the machine (see

page 12, chapter 7.9).

• Make sure the filter holder

insert, GoldTone filter (or paper

filter) and cover lid are in place

(see page 12, chapter 7.10 and

7.11).

• Swing the filter holder to the left

until it locks itself underneath

the grinder.

• Close the water container lid.

Now you can swing the filter

holder underneath the grinder.

• Cleaning: Wipe the lid clean

after each use. Do not clean in

dishwasher!

Note: The lid has two parts: a soft,

removable collar and a hard disk.

If you accidentally remove the soft

collar, just replace it in its original

position (with the high rim pointing

upwards).

• Place the glass carafe on the

heating plate (H). Note: Keep

the carafe handle pointed

straight outward during the

brewing process. If the handle

points to the right and the

pouring spout of the carafe sits

underneath the feeder channel,

moisture from the freshly brewed

soft collar

insert your finger or any other

object into the grinder.

coffee could flow upwards into

the feeder channel.

FIRST TIME GRINDING: First use

of the grinder will yield a bit less

ground coffee (which is used to fill

the feeder channel). All further

grinding will yield the correct

amount of ground coffee.

• Push the on/off button (G4) until

the red light turns on.

The grinder will start grinding

and the coffee will fall into the

filter. Through the window in the

feeder channel cover you can

actually see how the ground

coffee moves forward. After the

grinding is finished, the filter

holder will automatically swing

back and underneath the water

container lid and the brewing

process will begin.

• After brewing is finished, the

machine will keep the coffee hot

for two hours. Then the machine

will turn off automatically (red

indicator light turns off). If you

want to keep the coffee hot

longer, simply press the on/off

button (G4) again for an additional

two hours of warmkeeping.

CAUTION: Do not open the water

container lid during the brewing

process. Hot water could spill out,

causing serious injuries.

CAUTION: Before pouring water

into the water container again, turn

the coffee maker off and let it cool

down for two minutes.

8a. Drip Stop / Stop-And-Serve

• While the coffee is brewing you

can remove the carafe to pour a

cup or two. The drip stop in the

filter holder will close automati-

cally. Replace the carafe within

20 seconds. Then the flow of

coffee continues.

• If coffee beans should get stuck

during grinding, lightly tap the

bean container lid.

CAUTION: As long as the grinder

is in operation, do not open the

bean container lid and do not

CAUTION: The drip stop might not

close completely allowing coffee

to drip onto the heating plate. In

case, do not move the filter holder

underneath the grinder.

• Open the water container lid (I).

• Fill the desired amount of fresh,

cold water into the water con-

tainer.

• Remove the cover lid (L) from

the filter holder.

• Fill the desired amount of

ground coffee into the GoldTone

filter (or paper filter).

this case immediately replace

carafe and let all the coffee flow

into the carafe. (This happens

when the mesh of the GoldTone

filter is clogged up causing coffee

grounds to over-flow. If you use

filter paper, use the correct size

(size 4), and check if there was a

hole in the bottom of the filter

paper). To clean the drip stop, see

page 17, chapter 10c.

• Close the water container lid.

• Make sure that the carafe (with

the lid) sits underneath the filter

holder on the heating plate (H).

• Push the on/off button (G4) until

the red light turns on. The brew-

ing process starts immediately.

8b. Using Different Beans At

Different Times

Some people like to drink different

types of coffee at different times.

In this case, only fill the amount of

coffee beans into the bean con-

tainer that you need in order to

grind for your next pot of coffee.

For example, if you want to grind

for 8 cups of coffee, fill eight level

scoops of coffee into the bean

container.

8d. Warmkeeping

After brewing is finished, the heat-

ing plate will stay on for 2 hours,

keeping the coffee hot. Then the

machine will turn itself off (red light

off). You may also turn the

machine off manually by pushing

the On/Off button.

8c. Using The Coffee Maker

Without The Grinder

You can use your CoffeeTEAM S

like a regular drip coffee maker

(without using the grinder). In this

brewing process will start.

10. Cleaning

9. Grinding and Brewing Coffee

Later

• Program the timer and grinder

setting as described in chapter

7.5, page 8.

CAUTION: Make sure machine is

turned off and cooled down. Never

use scouring agents. Never

immerse the machine in any liquid.

Never clean machine under running

water.

Dishwasher safe (upper rack):

Glass carafe (remove snap-on lid

before placing in dishwasher) and

GoldTone filter.

• Fill beans into the bean container

(see page 10, chapter 7.7).

• Fill the desired amount of water

into the machine (see page 12,

chapter 7.9).

• Make sure the filter holder insert,

GoldTone filter (or paper filter)

and cover lid are in place.

• Caution: Before you swing the

filter holder underneath the

grinder, make sure there are no

grounds left over in the filter

holder insert from previous

grinding.

• Swing the filter holder to the left

until it locks itself underneath

the grinder.

• Now push the “auto” button (G6).

The green auto light will turn on

and the programmed grinder

setting will be displayed. At the

programmed time, the green

light will turn off, the red light

will turn on, and the grinding /

Special Cleaning Tips:

10a. Cover Lid (L): Wipe the cover

lid clean after each use. Do not

clean in the dishwasher. If the

soft collar becomes separated

from the hard disk, simply replace

it with the high rim pointing

upwards.

soft collar

10b. GoldTone Filter: Clean after

brewing. Do not let used coffee sit

for hours in the filter. Coffee oils

will clog the mesh, causing the

coffee to overflow the next time

you brew coffee.

filter holder. Repeat if necessary.

10f. Cleaning The Feeder

Channel

Periodically check the feeder

channel for oil and coffee build-up.

As long as you can see coffee

flowing freely through the feeder

channel window there is no need

to open the cover.

The feeder channel should be

cleaned in any of the following

situations:

• moisture or heavy oil build-up

has caused the ground coffee

to block the feeder channel, or

• you do not plan on using the

grinder for more than a week.

10c. Filter Holder Insert (M)/Drip

Stop (N): Clean the filter holder

insert and the drip stop under run-

ning water. Check to make sure

that the drip stop closes com-

pletely under running water also.

10d. Bean Container (A): When

the bean container is empty, use a

dry cloth to wipe off any oil

deposits. Never pour any liquid

into the bean container. Never try

to disassemble the bean container.

10e. Burr Grinder/Burrs:

It is possible that small coffee par-

ticles might stick to the burrs.

Once every 2 months let the bean

container run out of beans.

loose coffee

Remove the glass carafe. Set the

grinder to 10 cups. Make sure the

GoldTone filter is inserted. Move

the filter holder underneath the

grinder. Set the fineness selector

to the largest dot. Push the on/off

button. While the machine is

grinding tilt the whole machine a

bit forward and pat it on the back.

This will loosen any coffee parti-

cles and transport them into the

For cleaning, please follow this

sequence:

a. Lift the water container lid and

remove the cover lid. Make sure

the GoldTone filter or a paper

filter is inserted in the filter holder

insert.

packed coffee

b. With a coin, turn the screw on

top of the feeder channel a

quarter turn counter clockwise

to the 12 o’clock position.

d. Move the filter holder under-

neath the grinder until it locks.

closed

open

e. Use the handle of the scoop to

scrape out blocked coffee or

leftover toast into the filter holder.

f. Wipe the inside clean with a dry

cloth.

c. Firmly lift the feeder channel

cover upwards and to the right

as shown, and set aside.

Note: The feeder channel cover

will make a "snapping" sound

when it is lifted from the

machine.

g. Push the manual release button

upwards. The filter holder will

swing back to the right.

11. DECALCIFYING

For prolonged use of your appliance it is necessary to decalcify

regularly. Calcium (limestone) found in drinking water will leave

deposits in the machine. We highly recommend that you decalci-

fy your coffee maker at least every four months.

Manual Release Button

ATTENTION: Before decalcifying, remove the GoldTone filter, the

water filtration container and the charcoal filter. Do not place the

GoldTone filter or filter paper in the filter holder insert.

h. Wipe the inside of the feeder

channel cover with a dry cloth

(do not immerse in water).

When to Decalcify:

A slowdown in brewing indicates calcium deposits are present in

the coffee maker.

How to Decalcify:

With Vinegar:

• Fill the water container with approximately 40 oz. (8-cups) of

water and 6 tablespoons of citric acid or white vinegar and

operate the appliance twice.

• After decalcifying, let the appliance run twice with plain water.

This will rinse away any remaining vinegar.

i. Replace the feeder channel

cover and turn the screw a

quarter turn clockwise to the

3 o’clock position.

• Rinse the carafe with lukewarm water and clean the filter holder

and the water chamber in a warm water and mild liquid soap

solution.

open

closed

You can also use any of the decalcifying agents available for

drip coffee makers from your local coffee store or supermarket.

Follow their enclosed instructions.

Note: Decalcifiers are acids and therefore must be handled

properly. Please check the information on the packaging of the

decalcifying agents before using.

j. Empty the GoldTone filter or

paper filter.

A. In the program mode, the saucer blinks. Three different

12. FAQ (Technical Questions)

display modes are possible:

Q1. I accidentally locked the filter holder underneath the

grinder. What do I do?

A. Push the Manual Release Button upwards (see page 19).

1.Current time and grinder settings.

2.Programmed setting: Immediately after you push the prog

button (G10), it shows the programmed time and grinder

settings.

Q2. There is no coffee coming out of the grinder. It seems as

though the coffee is completely clogged inside the grinder.

What do I do?

3.Auto setting: After you push the auto button (G6), the display

shows the current time but the programmed grinder settings.

A. Please follow the steps outlined in chapter 10f, page 17.

Q8. Can I change any settings while the grinder is running?

A. No. The red On/Off light or the green Auto light have to be off

to change the grinder settings.

Q3. Can the grinder run without beans in the bean container?

A. Yes.

Q4. Why do some buttons work with delay?

Q9. What happens if the filter holder does not return under-

neath the water container lid after grinding?

A. After the grinding process is completed, the swing-back

mechanism will try twice to return the filter holder (within 5 sec-

onds). If it does not swing back sufficiently, the machine will

automatically turn itself off to prevent the coffee maker from

brewing. Please call us.

A. If you touch or push the wrong button accidentally, it will not

immediately change the settings. You have to hold down each

button for one second to activate/change the function (except

for turning the coffee maker off).

Q5. Can I have different grinding settings for the current

and the programmed mode?

A. Yes! See chapters 7.2 through 7.5.

Q10. What happens if the water container lid is open during

the brewing process?

A. The hot water will splash in spurts against the hot water

guard (see page 12) and will be guided back into the water con-

tainer. Immediately close the water container lid.

Q6. How long does the machine keep the grinding and

brewing settings?

A. All settings are maintained as long as the machine is plugged

in. The programmed setting is activated only when you push the

auto button (G6) and the green auto light turns on.

Q11. Beans spilled into the water container. What do I do?

A. Unplug the machine, remove the carafe, empty the bean con-

Q7. How do I know if the display shows the current or the

programmed setting?

tainer (as well as you can), remove the filter holder insert and

GoldTone filter, open the water container lid and turn the

machine upside down over a sink. You need to reset all settings.

amount indicator at 10, change the strength indicator to strong,

and set the fineness selector in the coarsest position (largest

dot). If the coffee is still not strong enough, use a little less water.

Q12. When I unplug the machine, the display shows random

symbols for about 15 seconds, then turns off. Is that normal?

A. Yes. The condenser of the display discharges.

Q2. I want a full pot of coffee at 8:00 AM. What time should I

program the grinder to start?

A. Set the timer 15 minutes earlier (in this case at 7:45 AM).

Q13. What happens in the auto setting (green light is on) if I

forget to push the filter holder underneath the grinder?

A. You will get hot water. At the pre-programmed time, the green

light will turn off and the red light will turn on. If the filter holder

is still underneath the water container lid, the machine assumes

Q3. Can I grind “espresso beans” for my espresso machine?

A. Before final assembly we manually calibrate each pair of burr

grinders (testing with beans!) to prevent clogging while grinding,

regardless which type of bean you use. The actual grinding,

however, is designed to work well with drip coffee brewing. As a

you want to brew coffee only (without grinding). Since there is no result, the grind might not be suitable for your espresso machine.

coffee in the filter holder, you will get hot water only in the

carafe.

Q4. The grinder makes a loud noise? No coffee is processed.

A. A stone blocks the grinder. Please call 1-800-767-3554.

13. FAQ (Coffee Questions)

Q1. How much coffee should I use?

A. The grinder grinds approximately between 4 seconds (setting

“2, mild”) and 30 seconds (setting “10, strong”). The maximum

amount of coffee will be ground in the setting “10, strong” with

the fineness selector in the coarsest position. This is equivalent

to 12 level portions with the enclosed measuring scoop.

EXAMPLE: for 10 cups of coffee: Fill the water container with

the maximum amount of water (see chapter 7.9, page 12). Set

the grind amount indicator (G1) to 10, the strength indicator (G3)

to mild, and the fineness selector (C) to fine.

• IF THE COFFEE IS TOO STRONG: change the grind amount

indicator to 8, the strength indicator to medium, and continue to

use the same amount of water.

• IF THE COFFEE IS NOT STRONG ENOUGH: leave the grind

14. ONE YEAR LIMITED WARRANTY

sequential damages caused by the machine. The term “inciden-

tal damages” refers to the loss of the original purchasers time,

loss of the use of the machine or other costs relating to the care

and custody of the machine. The term “consequential damages”

refers to the cost of repairing or replacing other property which

is damaged when this machine does not work properly. The

remedies provided under this warranty are exclusive and in lieu

of all others.

This warranty covers your CAPRESSO machine, model #454.

This warranty is in effect for one year from the date of the first

consumer purchase and is limited to the United States of

America. This warranty covers all defects in materials or

workmanship (parts and labor) including UPS ground trans-

portation for both ways, if necessary.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

The warranty does not cover:

• Any machine not distributed by CAPRESSO within the United

States.

• Any machine not purchased from an Authorized CAPRESSO

Dealer.

• Commercial use of the machine.

• Damage caused by accident, abuse, negligence, misuse,

improper operation or failure to follow instructions contained in

this manual.

• Any service or alteration performed by an unauthorized person,

company or association.

Capresso, Inc.

81 Ruckman Road

Closter, NJ 07624

• Any glass parts, including the glass carafe.

• Charcoal filters.

1-800-767-3554

Fax: 201-767-9684

Other limitations and exclusions:

email: [email protected]

Website: www.capresso.com

Any implied warranties including fitness for use and mer-

chantability are limited in duration to the period of the express

warranty set forth above and no person is authorized to assume

for CAPRESSO any other liability in connection with the sale of

the machine.

CAPRESSO expressly disclaims liability for incidental and con-

NEC VERSA LXI User Manual
LaCie 14R6 User Manual
JVC KD SX770 User Manual
Fujitsu PRIMEPOWER B23Q8YA G 02 F User Manual
Fujitsu MBA3073NC User Manual
Ericsson TEMS EDGE User Manual
Casio 32B User Manual
BT 1010 User Manual
Audiovox PR 130 User Manual
Aluratek AHDU350750 User Manual