7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 1
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
User guide
BT Hub Phone 1010
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 3
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
This user guide provides you with all the information you need to
get the most from your phone.
Got everything?
•
•
BT Hub Phone
1010 handset
This phone has been designed to work with BT Total Broadband
and BT Broadband Talk. Before you make your first call you will
need to set up your phone. This doesn’t take long and is easy to
do. Just follow the simple instructions on the next few pages.
BT Hub Phone 1010
charger cradle
•
•
•
2 x rechargeable batteries
Mains power adaptor
Need help?
If you have any problems setting up or using your BT Hub Phone
1010 please contact the Helpline on 0845 600 7030.
You need a BT Total
Broadband account
Alternatively, you may find the answer in ‘Help’
at the back of this guide.
•
•
You need a BT Broadband
Talk account
You need a BT Home Hub
Hi-Definition sound will not
work without a BT Broadband
Talk account. Visit bt.com to
get this service if you don’t
already have this.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 4
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
4
In this guide
Getting started
Using the phone
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Setting up the handset . . . . . . . . . . . . . . . .7
Standby display . . . . . . . . . . . . . . . . . . . . . .10
Switching the handset power on/off . . . . .25
Make an external call . . . . . . . . . . . . . . . . . .25
Preparatory dialling . . . . . . . . . . . . . . . . . . .25
End a call . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Receiving calls . . . . . . . . . . . . . . . . . . . . . . .26
Call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Handsfree calling . . . . . . . . . . . . . . . . . . . . .26
Earpiece volume . . . . . . . . . . . . . . . . . . . . . .27
Silence the handset ringer . . . . . . . . . . . . . .27
Secrecy . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Keypad lock . . . . . . . . . . . . . . . . . . . . . . . . .28
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Redial a number . . . . . . . . . . . . . . . . . . . . . .30
Delete a redial number . . . . . . . . . . . . . . . .31
Delete the redial list . . . . . . . . . . . . . . . . . . .31
Save a redial list number to
Getting to know your phone
Handset buttons . . . . . . . . . . . . . . . . . . . . . .11
Navigating the menus . . . . . . . . . . . . . . . . .12
Menu map . . . . . . . . . . . . . . . . . . . . . . . . . .13
Making calls with BT Broadband Talk
Making and receiving calls . . . . . . . . . . . . .14
Hi Def calls . . . . . . . . . . . . . . . . . . . . . . . . . .17
Multiple calls . . . . . . . . . . . . . . . . . . . . . . . .17
Call quality . . . . . . . . . . . . . . . . . . . . . . . . . .19
Call transfers . . . . . . . . . . . . . . . . . . . . . . . . .19
Your BT Broadband Talk bill . . . . . . . . . . . . .19
Making and receiving multiple calls . . . . . .20
Frequently asked questions . . . . . . . . . . . . .22
the phonebook . . . . . . . . . . . . . . . . . . . . . . .32
Phonebook
Store a phonebook entry . . . . . . . . . . . . . . .33
Character map . . . . . . . . . . . . . . . . . . . . . . .34
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 5
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
In this guide
5
Dial a phonebook entry . . . . . . . . . . . . . . . .35
Edit a phonebook entry . . . . . . . . . . . . . . . .37
Store a phonebook entry
with an assigned ring . . . . . . . . . . . . . . . . . .38
Delete a phonebook entry . . . . . . . . . . . . . .38
Delete all phonebook entries . . . . . . . . . . .39
Handset settings
Adjust the display contrast . . . . . . . . . . . . .46
Adjust the earpiece volume . . . . . . . . . . . . .47
Naming a handset . . . . . . . . . . . . . . . . . . . .47
Display wallpaper . . . . . . . . . . . . . . . . . . . . .48
Menu background colour . . . . . . . . . . . . . .49
Auto-talk . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Beep tones . . . . . . . . . . . . . . . . . . . . . . . . . .51
To switch key beeps On/Off . . . . . . . . . . . . .51
To switch low battery beeps On/Off . . . . . .52
To switch out of range beeps On/Off . . . . .53
To change the call ringer volume . . . . . . . .54
To change the ringtone . . . . . . . . . . . . . . . .55
Caller Display and the calls list
View/dial numbers in the calls list . . . . . . .40
Save a calls list entry to
the phonebook . . . . . . . . . . . . . . . . . . . . . . .42
Delete a calls list entry . . . . . . . . . . . . . . . . .42
Delete all calls list entries . . . . . . . . . . . . . .43
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . .44
Speak to a second caller . . . . . . . . . . . . . . .44
Hub base settings
Reset your BT Hub Phone 1010
BT Calling Features
to the default settings . . . . . . . . . . . . . . . . .56
To change the System PIN code . . . . . . . . .56
1571 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
BT Helpdesk . . . . . . . . . . . . . . . . . . . . . . . . .45
BT 118 500 . . . . . . . . . . . . . . . . . . . . . . . . .45
Withhold my number . . . . . . . . . . . . . . . . . .45
Display my number . . . . . . . . . . . . . . . . . . .45
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 6
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
6
In this guide
Time settings
General information
Setting the time . . . . . . . . . . . . . . . . . . . . . .58
To set an alarm . . . . . . . . . . . . . . . . . . . . . . .59
To change the alarm melody . . . . . . . . . . . .60
To cancel an alarm setting . . . . . . . . . . . . . .61
To silence the alarm . . . . . . . . . . . . . . . . . . .61
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Environmental . . . . . . . . . . . . . . . . . . . . . . .74
Product disposal instructions . . . . . . . . . . .74
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . .75
If you have to return your
Using additional handsets
Registering a Hub phone to
BT Hub Phone 1010 . . . . . . . . . . . . . . . . . .75
Technical information . . . . . . . . . . . . . . . . .76
R&TTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Declaration of Conformance . . . . . . . . . . . .76
your BT Home Hub manually . . . . . . . . . . .62
Making internal calls . . . . . . . . . . . . . . . . . .64
Receiving internal calls . . . . . . . . . . . . . . . .64
Transferring calls . . . . . . . . . . . . . . . . . . . . .65
De-register a handset . . . . . . . . . . . . . . . . .65
Software upgrades
Automatic software upgrade . . . . . . . . . . . .67
Manual software upgrade . . . . . . . . . . . . . .68
Rescue mode . . . . . . . . . . . . . . . . . . . . . . . .69
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 7
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
7
Getting started
Location
You need to place your BT Hub Phone in the charger cradle
and then place both handset and charger cradle in the BT
Home Hub to set it up. When you are doing this you don't
need to use the power supply provided as the handset and
charger cradle take their power from the hub. After this you
can place the handset and charger cradle anywhere in the
house where there is mains power and you can then use the
power supply provided.
WARNING
Do not place your BT Hub Phone 1010
in the bathroom or other humid areas.
Handset range
The BT Hub Phone 1010 has a range
of 300 metres when there is a clear
line of sight between the hub and the
handset. When there is no clear line of
sight between the hub and the
handset, the range could be reduced
to 50 metres. Thick stone walls can
severely affect the range.
You will need to place your handset and charger into the hub
from time to time to receive updates and new services to your
phone as your BT Hub Phone 1010 is fully upgradeable.
Signal strength
The icon on your handset indicates
when you are in range.
Setting up the handset
When it flashes, you are out of range.
When you move out of range of the
base, you will hear the out of range
tone. This tone is repeated until you
move back into range.
1. Remove the grey cover from
the front of the BT Hub.
If it does not come off easily,
carefully apply a little
more force.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 8
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
8
Getting started
IMPORTANT
The hub must be plugged into the
mains power socket at all times.
2. Attach the cradle to the BT
Home Hub.
Talk/Standby time
In ideal conditions, the handset
batteries should give about 7 hours
talk time or 100 hours standby.
Note that new batteries do not reach
full capacity until they have been in
normal use for several days.
3. Slide open the battery
compartment on the back
of your BT Hub Phone
handset. Insert the 2 x AAA
rechargeable batteries
supplied. Slide back the
cover to close.
Battery symbols
Battery charged
Battery half charged
Battery low
Battery empty (icon will be red)
Important
You can leave your handset in the
charging cradle attached to the BT
Home Hub if you wish or you can locate
your handset anywhere in your home,
using the mains power adapter and
charging cradle to keep the handset
charged. Occasionally you will need to
connect the handset to the charger
connected to the BT Home Hub to
receive new upgrades. You will be asked
to do this when there is new software.
4. Place the BT Hub Phone 1010
into the cradle on the BT
Home Hub. You should hear a
beep when the handset has
been placed correctly. Charge
your handset for at least 24
hours on first charge before
using the phone.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 9
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Getting started
9
5. On the handset:
Battery performance
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, giving the handset less
talk/standby time.
•
•
•
Screen prompts on the handset will help guide you through
the registration process. It’s easy!. PLEASE REGISTER YOUR
HANDSET TO THE BT HOME HUBwill appear on screen.
Eventually they will need to be
replaced. Please ensure you use the
same mAh rating for battery
replacement to the batteries that
were provided when you received the
handset.
Press OK. You then need to press and hold the wireless button
on the back of the Hub for 3 seconds (the phone light on the
Hub will then flash) then you can release the button.
Press OK and place the handset in the charger connected to
the Hub. Once the handset and charger cradle are in the Hub,
REGISTERINGHANDSETS, PLEASEWAITappears on screen. DON'T
REMOVE HANDSET UNTIL YOU GET A CONFIRMATION MESSAGE.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 10
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
10 Getting started
If registered successfully you should see: HANDSET
REGISTERED. If unsuccessful then HANDSETREGISTRATION
FAILEDwill appear and you will have to try the process again.
You will be returned to the please register screen.
Standby display
Clock
Battery status icon
Range icon
Shortcut to menu
Shortcut to phonebook
Your BT Hub Phone 1010 is ready for use.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 11
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
11
Getting to know your phone
Handset buttons
Redial/Vol/Scroll Up/Pause
In standby, press and release to access the redial
list, page 30.
Right
To position cursor during navigation.
Soft Key 2
During a call, press to increase the earpiece
volume, page 27.
In a menu, press to scroll through options,
page 12.
In standby mode or during a call, press
to access the phonebook, page 33.
In a menu, press to select back
and return to the previous screen.
Soft Key 1
In standby, press to access
End/Power
Press and hold to switch the power
off or on, page 25.
Press to end a call.
Press and release to revert to idle.
the menu, page 12.
During a call, press to use Secrecy, page 28.
In a menu, press to select the option displayed
above the button.
Int
Left
In standby, press to make an internal call
(if you have more than one handset registered
to the base), page 64.
During a call, press to start a transfer of the call
by making an internal call.
To position cursor during navigation.
Calls list /Scroll Down
In standby, press menu to access the
Calls list, page 40.
During a call, press to decrease the earpiece
volume, page 27. In a menu, press to scroll
down through display options, page 12.
Handsfree
In standby, use to make a handsfree
call, page 26-27.
Talk
Press to make or receive a call, page 25.
During a call, use to switch between handsfree
and the handset.
R (Recall)
Allows you to switch to a caller waiting on hold.
#/Keypad lock
In standby, press and hold to lock the keypad,
page 28-29.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 12
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
12 Getting to know your phone
Option buttons
Navigating the menus
Your BT Hub Phone 1010 handset has a menu system to
guide you through the handset and setting options. Refer to
the menu map on the next page for the available options.
When the handset is displaying the idle screen:
1. In standby press Menu
to open the main menu.
2. Use and to scroll through the menu list.
Soft Key 1
Soft Key 2
3. When the menu item you want is displayed, press OK
to
Press Back
a menu.
to go back one level in
select and view the sub-menus available.
Keep pressing Back
the idle screen at any time.
to return to
4. At any time, press Back to go up one level.
Or press and release the
button.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 13
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Getting to know your phone 13
Menu map
Calls Lists
Base settings
Received Calls
Dialled Calls
Default Settings
System PIN
Delete Calls List
Received Calls
Dialled Calls
All Calls
Melody
Ringtone
External Calls
Internal Calls
BT Globe
Ring Volume
1571
Help desk
Time Settings
Alarm
BT 118 500*
Withhold my number
Display my number
On/Off
Set Alarm Tone
Set Date & Time
Handset
Contrast
Ear Volume
Handset Name (default BTphone)
Picture (5 choices)
Registration
Register Handset
Select Base
De-register
Menu Colour
Blue
Green
Red
Names
Find entry
Show Details
Delete Entry
Edit Entry
Auto Talk
On
Off
Ringtone
Beep Tones
Key Beep
Low Battery
Out of Range
Add Entry
Home
Work
Mobile
Delete all Phonebook
Handset Software
Handset update
Software version
* Please note that there are other directory enquiries services available. Please refer to bt.com for BT 118 500 pricing information.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 14
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
14
Making calls with BT Broadband Talk
As part of your BT Total Broadband subscription, you get access to
BT Broadband Talk which gives you free UK evening and weekend
calls (up to one hour) over your broadband connection.
BT Broadband Talk is a simple and convenient way to make
calls over the internet. The only difference is that calls go
through your broadband connection rather than your normal
phone line.
With BT Broadband Talk, you get a separate number, most of
the benefits of an extra line, incredibly cheap international call
rates and free calling features including 1471 and BT Answer.
For more detail, charges and terms and conditions please go
Making and receiving calls
Once you’ve got BT Broadband Talk set up, all calls made with
your BT Hub Phone will use BT Broadband Talk. You can also
have a phone plugged into the back of the hub which will
also use BT Broadband Talk.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 15
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Making calls with BT Broadband Talk 15
You don't need to use an additional
phone line and wall socket with the BT
hub phones, this is because the hub
phone works with the hub and the hub
is connected to the telephone line.
Standard telephone
BT Home Hub
line wall socket
Broadband cable
Microfilter
C onverter
You can still use your normal phone
line for outgoing calls by pressing 5
first before the number you want to
call. This will work for all Hub phones
and a phone plugged in the back of
the Hub.
C orded or D EC T phone
plugged into phone line
C orded or D EC T phone
plugged into back of Hub
BT Hub Phone
Remember - if you do this you won’t
take advantage of the great BT
Broadband Talk call rates!
Standard phone line
BT Broadband Talk line
BT Broadband Talk line
Incoming and outgoing calls Incoming and outgoing calls Incoming and outgoing calls
on standard line
on Broadband Talk line
on Broadband Talk line
C alls charged according
to your BT Together
option package
Free Evening & W eekend
calls to UK landlines*
Free Evening & W eekend
calls to UK landlines*
Dial 1571 to check
messages that have been
Dial 1571 to check
messages that have been
number left on your BT Boadband
Talk number
Dial 1571 to check
messages that have been
left on your BT Broadband
Talk number
left on your
standard
C hoosing which phone you want ringing
You can control which phones connected to your Hub will ring by using the
Hub Manager. T o find out how to access the Hub Manager using your
computer, go to the hub icon on your desktop.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 16
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
16 Making calls with BT Broadband Talk
To see BT Broadband Talk call charges: visit
www.bt.com/broadbandtalk and go to the
‘what it costs’ section.
You can make outgoing calls using your standard phone line
number by dialling 5 and then the number you want to call.
After dialling 5 you must wait for a different dial tone to the
one you normally use with BT Broadband Talk before dialling
a number. Remember if you do this you won’t be taking
advantage of BT Broadband Talk rate.
How do I know BT Broadband Talk is set up on my Hub?
The ‘Phone’ icon on the front of your hub will be lit up, a solid
green colour and you will hear a higher pitched dial tone than
normal dial tone. If the service is down or not activated (there
will be no green icon on the hub), all calls will be made using
your landline number. You will not be able to receive calls to
your BT Broadband Talk number on the hub handset until BT
and follow the on screen instructions. You will need your BT
Broadband Talk number and password handy.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 17
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Making calls with BT Broadband Talk 17
Hi Def calls
Your BT Hub phone is designed with High Definition Sound
(Hi-dS ™) capability.
If somebody using a BT Hub Phone (or other Hi-dS ™ capable
device) calls someone else using a Hi-dS ™ capable device,
then the call will automatically set itself to the best call
quality using the Hi-dS ™ call quality feature. Hi-dS ™ works
automatically, so you don’t need to do anything to enjoy
high-quality sound.
You won’t get Hi Def sound from the phone plugged into the
back of the hub though as this is only available on devices
which carry the Hi-Def ™ logo.
Multiple calls
No more hogging the phone….with BT Broadband Talk you
can make more than one phone call at the same time.
You can have 2 calls going on at the same time via the BT Hub
phone handsets and a third call using a phone plugged into
the socket in the back of the hub.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 18
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
18 Making calls with BT Broadband Talk
If you also have a videophone or BT Soft Phone associated
with your BT Broadband Talk number you can also use them to
make simultaneous calls up to a total of 4 calls across all your
BT Broadband Talk phones.
In situations where there are already 2 calls in progress on BT
Hub phone handsets, a warning: MAXIMUMNUMBEROFCALLS
ALREADYINPROGRESSis displayed on any other additional
BT Hub phone handsets you may have around the house
informing you that you cannot make any more calls. There is
also a special busy tone presented if you press the
button to make a call when it is not possible.
When using multiple handsets you can make internal calls
between handsets or transfer a call between handsets. You
can only use this functionality if there isn't call in progress on
another handset.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 19
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Making calls with BT Broadband Talk 19
Call quality
Usual call quality using BT Broadband Talk should be better than
on a mobile phone, but it can be affected by general congestion
on the internet, or by heavy traffic on the broadband link into
your home (e.g. if someone in your home is playing games
online). We cannot, therefore, guarantee call quality.
Call transfers
If there is only a single call in progress on one Hub Phone that
call can be transferred to another Hub Phone.
It is not possible to transfer calls between Hub Phones and
the phone plugged into the back of the hub.
Your BT Broadband Talk bill
Broadband Talk can be added onto to your existing phone bill.
If you have your calls itemised any calls you make using BT
Broadband Talk will be listed in a separate section on your bill.
However, you won’t see any charges if you have the free
Evening and Weekend package and only made Broadband
Talk calls to UK landlines between 6.00pm and 6.00am or at
weekends. Please note that you’ll be charged for calls to
excluded numbers (mobile,premium rate or international).
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 20
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
20 Making calls with BT Broadband Talk
Making and receiving multiple calls
Independent of Hub
Independent of Hub
Standard telephone
line wall socket
Softphone
Broadband cable
Microfilter
C onverter
Videophone
HS 1
Corded or DECT phone
plugged into back of hub
BT Hub Phone
Corded or DECT phone
plugged into phone line
HS 2
HS 4
HS 5
HS 3
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 21
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Making calls with BT Broadband Talk 21
Phone in back of hub
Hub handsets
All phones ring.
Soft phone
Videophone
Incoming call 1
Incoming Call 2
Incoming Call 3
All phones ring, call waiting on the device you picked up your incoming call 1 on.
All available phones ring, apart from call waiting on the device(s) you picked up your incoming call 1
& call 2 on. If call 1 and 2 have been answered on Hub phones, other Hub phones will not ring.
Incoming Call 4
If two hub phones have been answered, any additional hub handsets will not ring and will have
a message on the screen: MAXIMUMNUMBEROFHANDSETSINPROGRESS. If any one of the two hub
phones hangs up all the handsets will ring. As there is a limit of two calls on the handsets at
any one time. Calls can still be answered on the phone at the back of the hub or Softphone
or Videophone.
Incoming Call 5
Calls will go straight to voicemail. Limits reached.
REMEMBER that call limits apply:
2 calls on Hub handsets and one call on the phone plugged into the back of the Hub.
The table assumes you have answered your calls on Hub phones first.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 22
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
22 Making calls with BT Broadband Talk
Frequently asked questions:
What happens to service in the event of power or
network failure?
The BT Broadband Talk service will fail in the event of
power or network failure. In a network failure, however you
will not lose service as your Broadband Talk phone will
automatically revert back to your landline. You will know this
because the dial tone will be the normal dial tone instead of
the high pitch Broadband Talk tone, and the phone icon light
will not work. If there is no power to the Hub you won’t be
able to make any calls.
What happens when I make emergency calls?
If you make an emergency call to 999 or 112 from your BT
Broadband Talk line, the Hub will automatically use your
standard telephone line.
This is a safety measure to ensure the emergency services can
identify your location, if necessary.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 23
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Making calls with BT Broadband Talk 23
Emergency Location Information is captured and passed to
the Emergency Services for use in the case of an emergency
call being made via the service. The location information
captured is limited to the address of the BT telephone line.
Important: if there’s a power failure, your BT Hub Phone
and/or DECT cordless phone will not work. Alternative
arrangements should be made for access to emergency
services. We recommend your primary telephone line is
maintained for contacting emergency services.
Can I take my BT Broadband Talk number with me to
another provider?
It is not currently possible to transfer your Broadband Talk
056 number to another provider.
You Hub and Hub phone cannot be used with another
provider.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 24
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
24 Making calls with BT Broadband Talk
What numbers can I call?
You can call:
•
•
•
•
•
•
•
•
•
•
Any person in the UK
Other Broadband Talk customers
Anywhere in the world
Any UK mobile number
All 08 numbers (including 0800/0845/0870)
Premium rate numbers
Personalised numbers (some 07 numbers)
BT directory enquiries 118500/505
Emergency Services
You can't call the operator, non BT directory enquiries, 101
(non-emergency calls i.e Community support and anti social
behaviour), short code numbers like 150, 151 and dial-up
Internet service providers.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 25
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
25
Using the phone
Switching the handset power off
Press and hold
.
Switching the handset power on
Press and hold
.
Dialling numbers quickly
Make an external call
1. Press listen for the dial tone then dial the number.
Numbers can also be dialled in
Handsfree mode (page 27), using the
phonebook (page 35), and from the
calls list (page 40).
Preparatory dialling (pre-dial)
When using BT Broadband Talk you
need to use the full dialling number.
To see the number on the display before dialling use pre-dial.
Pre-dial numbers can be up to 25 digits long.
If you make a mistake, press Clear
to delete the last digit.
1. In standby, enter the number you want to dial.
2. Press
to dial.
End a call
1. Press
or place the handset back on the charger cradle.
If auto talk option is on.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 26
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
26 Using the phone
When you receive a call, the handset
will ring the selected ringer melody.
Receiving calls
1. Press to answer the call or, if the handset is on the
charging cradle, simply lift it and speak.
Auto-answer
If you have switched auto-answer off
(see page 50) then you will need to
Call timer
press
to take the call.
after lifting the handset
Your handset automatically times the duration of all calls,
showing the time on the display from 10 seconds after
dialling to 3 seconds after the call ends.
Handsfree calling
Handsfree lets you talk to your caller without holding the
handset. It also enables other people in the room to listen to
both sides of your conversation.
Hi-Definition Sound
This is available when both parties are
using this technology, Hi-dsTM provides
richer sound quality on calls over your
BT Broadband Talk service.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 27
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Using the phone 27
To make a handsfree call
1. Press listen for the dial tone then dial the number.
You will hear it being dialled over the loudspeaker.
To switch to handsfree during a call
1. At any time during the call, to toggle between handsfree
mode and handset mode, press
.
To end a handsfree call,
press
.
Earpiece volume
1. During a call, press
to increase or
to decrease the
earpiece volume. The display shows the volume control
screen.
To change the earpiece volume using
the handset menu, see page 47.
Silence the handset ringer
The earpiece volume will remain at the
level set for all calls until changed.
When the phone is ringing, you can silence the ringer without
disconnecting the call.
1. Press
and the ringer will switch off.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 28
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
28 Using the phone
Secrecy
During a call, you can mute the microphone so that you can
talk to someone nearby without your caller hearing you.
1. During your call, press Secrecy
. SECRECYis displayed and
your caller cannot hear you.
2. To resume your call, press Off
.
Keypad lock
You can lock the keypad so that it cannot be used accidentally
while carrying the handset around.
While the keypad is locked you will still be able to
answer external calls. When you end the call the keypad
will remain locked.
The default setting is OFF.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 29
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Using the phone 29
To switch key lock on:
1. Press and hold
. KEYPADLOCKEDand the
icon
is displayed.
To switch key lock off:
While key lock is switched on, it is still
possible to make calls to emergency
numbers (999/112).
1. Press Unlock
. ARE YOU SURE?is displayed.
to unlock the handset.
2. Press Yes
Redial
Your handset automatically saves the last 20 numbers you
dialled into a redial list, together with the date and time you
made each call. From the list you can dial, delete or save a
number to the phonebook.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 30
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
30 Using the phone
If a name/number match is found in
the phonebook the name will be
displayed instead of the number.
To redial a number
From standby:
If you have dialled the same number
on more than one occasion, the call
will appear only once in the redial list.
1. Press
to access the redial list.
2. Press
or
to scroll and display the number you want.
to dial the number.
Each redial number can be up to a
maximum of 20 digits long. Numbers
exceeding 20 digits will not be stored.
3. Press
Via the menu:
Redial names can be up to 16
characters.
1. Press Menu
to access the menu.
2. Press
or
to scroll and display CALLSLISTSand press
When you are at the top of the list,
OK
.
pressing
takes you to the oldest
call and when at the bottom, pressing
takes you to the newest.
3. RECEIVEDCALLSis displayed. Press
or
until DIALLEDCALLSis displayed and press OK
to display the redial list.
If there are no numbers saved in the
redial list EMPTYwill be displayed.
4. Press
5. Press
or
to scroll and display the number you want.
to dial the number.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 31
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Using the phone 31
Delete a redial number
1. Press to access the redial list.
2. Press or to scroll and display the number you want
and press Options
.
3. Press
or
to scroll and display DELETE, then press OK
.
CALLDELETEDis displayed and the display goes back to the
redial list or standby if no more redial numbers are stored.
Delete the redial list
1. Press Menu
to access the menu.
2. Press
or
to scroll and display CALLSLISTSand press
OK
.
3. Press
or
to scroll and display DELETECALLSLIST
and press OK
4. Press or
press OK
.
to scroll and display DIALLEDCALLSand
.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 32
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
32 Using the phone
If you decide not to delete all calls list
5. DELETEDIALLEDCALLSLIST?is displayed, press Yes
to
entries, press No
to exit and
confirm. ALLDIALLEDCALLSDELETEDis displayed.
return to standby.
You can enter a name of up to 16
characters.
Save a redial list number to the phonebook
1. Press
to access the redial list.
or to scroll and display the number you want to
Use Clear
characters.
to delete incorrect
2. Press
If a number is already stored in the
phonebook, you will not have the
option to SAVENUMBER.
save and press Options
.
3. Press
press OK
or
to select HOME, WORKor MOBILEand
.
4. Press Edit
to edit the name. Use the keypad to enter a
name and press OK
to confirm.
5. Press Save to save the entry.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 33
HubHPuhbonPeho1n0e1010–1E0d–itiEodnit2io–nIs1su–e057–.0149.0.162–.0764–517916
33
Phonebook
Store a phonebook entry
You can use the phonebook to store up to 150 entries.
For each entry you can store a name together with home,
work and mobile numbers. Stored numbers can be up to 20
digits and stored names up to 16 characters long. Phonebook
entries are stored alphabetically.
To access the phonebook via the menu:
1. Press Menu
to access the menu.
or to display NAMESand press OK
Then press
select.
to
Or, to access the phonebook from standby:
Press Names
2. Press or
select.
3. NAMEis displayed, press OK
4. Enter a name using the keypad (see character map, page 34),
then press OK
to access the phonebook.
to display ADDENTRYand press OK
to
to select.
Deleting characters/digits
If you make a mistake, press Clear
.
.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 34
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
34 Phonebook
Entering names:
5. Press
press Edit
to select the type of number you want to store and
to select.
For example, to enter the name Tom:
Press for T.
Press three times for O.
Press for M.
6. Enter the telephone number, then press OK
.
7. You can store 2 further numbers for this contact in the same
The maximum length for names
is 16 characters.
way.
8. When all numbers for this contact are stored press Save
You cannot store an entry without
a number.
to confirm.
Character map
Button Lower Case
space . , : ; ! ? ¡ ¿ ‘ “ 1
Upper Case
space . , : ; ! ? ¡ ¿ ‘ “ 1
to change between upper and lower numeric case.
to change between upper and lower case.
to change numbers.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 35
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Phonebook 35
Pressing
will scroll forward
Dial a phonebook entry
alphabetically through the phonebook
entries.
From standby:
Pressing
will scroll backwards
1. Press Names
to access the phonebook.
alphabetically through the phonebook
entries.
2. Press OK to select FINDENTRYthen press
or
to scroll
to the entry you want.
Or, to search alphabetically:
Enter the first letter of the name you want using the keypad,
then scroll to the exact entry using or
.
3. Press to dial the number. You can also highlight the
name you want and press . If there is only one number
associated with the entry it will be dialled. If there is more
than one, a screen will be displayed with all the numbers for
you to select which one you want to call.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 36
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
36 Phonebook
Via the menu:
1. Press Menu
to access the menu.
2. Press
to select.
or
to scroll and display NAMESand press OK
If no entries are stored in the
phonebook, NOENTRYSTOREDwill be
displayed instead of FINDENTRY.
3. Press
or
to scroll and display FINDENTRYand press
OK
to select.
or
BT Broadband Talk Tip
4. Press
to scroll to the entry you want.
When using BT Broadband Talk you
always need to store the number with
the national dialling code.
Or, to search alphabetically:
Enter the first letter of the name you want using the keypad,
then scroll to the exact entry using
or
.
5. Press to dial the number.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 37
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Phonebook 37
You can also access the phonebook via
the menu, see previous page.
Edit a phonebook entry
1. Press Names
to access the phonebook.
2. Press OK to select FINDENTRYthen press
or
to
display the entry you want.
3. Press OK to display the entry selected. Press Options
then
use or to scroll and display EDITENTRY. The name
and numbers for the entry are displayed.
4. To edit the name/number:
To change individual characters
You cannot overtype digits or
characters, you can only clear and
insert. New digits or characters appear
after the cursor.
Press OK to select FINDENTRYthen press
highlight the name/number you want to edit and press
or
to
Edit
.
Use
or
to scroll backwards or forwards through the
or for digits.
characters and
Use Clear
to delete incorrect characters/digits.
Enter new characters/digits using the keypad.
5. Press OK to confirm, then Save to save the changes.
ENTRYSAVEDis displayed.
6. Press to return to standby.
Press Back
to the previous display.
at any time to go back
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 38
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
38 Phonebook
Store a phonebook entry with an assigned ring.
1. Press Names to access the phonebook.
2. Press OK to select FINDENTRYthen press
or
to scroll
and display the entry you want.
As you press
each melody is played.
or
a sample of
3. Press Options
then use
or
to display RINGTONE
and press OK
.
4. OFFis displayed if no melody has been previously set. Use
or
to select a melody.
Storing a phonebook entry with an
assigned ringtone means that you
know who is ringing when the phone
is set to a distinctive ring.
5. Press OK
when you hear the melody you want. RINGTONE
SAVEDis displayed.
Delete a phonebook entry
You can also access the phonebook via
the menu, see page 36.
1. Press Names
to access the phonebook.
2. Press OK to select FINDENTRYthen press
or
to
display the entry you want.
If there are no more phonebook
entries stored, ENTERNAMEwill be
displayed.
3. Press Options
then use
or
to display
DELETEENTRY.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 39
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Phonebook 39
4. Press OK
5. Press Yes
6. Press
, DELETE<ENTRY>?is displayed.
to confirm. ENTRYDELETEDis displayed.
to return to standby.
Delete all phonebook entries
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display NAMESand
to select.
or
to display DELETEALLPHONEBOOKand
to select.
If you decide not to delete all
phonebook entries, press No
cancel.
4. DELETEALLPHONEBOOK<ENTRY>?is displayed,
press Yes to select.
to
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 40
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
40
Caller Display and the calls list
BT Broadband Talk has automatic
presentation of the caller’s number.
The calls list will store up to 50 numbers. When the calls list is
full, a new call replaces the oldest.
If a name/number match is found in the phonebook the name
will be displayed instead of the number. Numbers can be up
to a maximum of 20 digits long. Numbers exceeding 20 digits
will not be stored.
View/dial numbers in the calls list
Via the menu:
Caller information not available
Occasionally the telephone number of
the caller is not available and cannot
therefore be displayed.
1. Press Menu
to access the menu.
Press
or
to scroll and display CALLSLISTSand press
OK
.
In this case, your BT Hub Phone 1010
will show one of the following
explanatory messages:
RECEIVEDCALLSis displayed, press OK
calls list.
to display the
WITHHELD
UNAVAILABLE
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 41
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Caller Display and the calls list 41
If the time on your handset is not
correct you will not see the correct
time that a call was received. To set
the time on the Hub, see page 58.
From standby:
Press
2. The most recently received call details are displayed.
Press or repeatedly to scroll through the list.
to access the Calls list.
For each entry, the caller’s number is displayed, or their name
if a name/number match is found in the phonebook and the
date and time the call was received.
If you did not answer a call (missed
call) you will see the icon next to
the caller’s number.
3. Press
to dial the displayed number.
*
Or
If the calls list is empty, NOENTRY
STOREDwill be displayed.
Press Back
repeatedly to exit the calls list and return to
the idle screen.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 42
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
42 Caller Display and the calls list
Save a calls list entry to the phonebook
1. Press to access the Calls list. The most recently received
call details are displayed.
2. Press
or
repeatedly to scroll to the entry you want.
. SAVENUMBERis displayed, press OK
3. Press Options
to
confirm.
4. Press
to select the type of number (HOME, WORKor
to confirm.
MOBILE) and press OK
5. Press Edit
. Enter a name using the keypad and press Save
Press Clear
characters and then press OK
confirm.
to delete incorrect
to
to save the entry.
The name can be up to 16 characters.
Delete a calls list entry
1. Press to access the Calls list.
2. Press or repeatedly to scroll to the entry you want.
, then press until DELETEis displayed.
to confirm. CALLDELETEDis displayed.
3. Press Options
4. Press OK
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 43
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Caller Display and the calls list 43
Delete all calls list entries
1. Press Menu to access the menu.
2. Press
or
to scroll and display CALLSLISTSand press
OK
.
3. Press
or
to display DELETECALLSLISTand press OK
.
4. RECEIVEDCALLSis displayed, press OK
.
If you decide not to delete all calls list
5. DELETERECEIVEDCALLSLIST?is displayed, press Yes
entries, press No
to exit and return
to confirm.
to standby.
ALLRECEIVEDCALLSDELETEDis displayed.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 44
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
44 Caller Display and the calls list
Call Waiting
Call Waiting is set automatically, you
can turn this feature off by using
#43#. When you turn Call Waiting off
you will hear a beep.
You will hear a beep every 5 seconds if an incoming call
arrives while you are already on the phone. This beep is not
audible to the person you are speaking to. The second caller’s
number (or name if a phonebook match is found) will appear
on the handset display.
Any other handsets will ring if the
maximum number of calls isn’t already
in progress.
Any other Hub handsets will also ring for incoming calls.
Speak to a second caller
1. Press
caller on hold. Press
and to switch between both callers.
to answer the second call and put your current
again to return to your first caller
Or
2. If you want to end the current call and pick up the waiting
The second caller is only charged from
the second you answer, not while they
are waiting to be connected.
call, press
. The handset will ring. Press
again to
connect to the waiting caller.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 45
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
45
BT Calling Features
By using the BT globe menu your BT Hub Phone 1010 gives
you easy access to a range of BT features.
These are:
•
•
•
•
1571 - Voicemail for BT Broadband Talk
Helpdesk - BT Hub Helpdesk assistance
BT 118 500* - BT Directory assistance
* Please note that there are other
directory Services available. Please
refer to bt.com for
Withhold my number - stops your number being presented
to the person you are calling
pricing information.
•
Display my number - if you normally hide your number you
can use this function to show your number when dialling.
To dial a feature
1. Press Menu
to access the menu.
2. Press
or
or
to scroll and display BTGLOBEand press OK
.
3. Press
until the feature you require is displayed:
1571, HELPDESK, BT118500, WITHHOLDMYNUMBERor
DISPLAYMYNUMBERand press OK to dial.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 46
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
46
Handset settings
To exit and return to the idle display at
You can choose a range of settings to suit your personal
preferences.
any time, press Back
repeatedly.
Adjust the display contrast
You can lighten or darken the contrast of the display to make
it easier for you to see according to the lighting conditions
where you are using the handset.
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display HANDSETand
.
.
or
until CONTRASTis displayed and
4. The current contrast level is highlighted. Press
scroll and adjust the contrast to the level you want, then press
Save to confirm.
or
to
5. Press Back repeatedly to return to the idle screen.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 47
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Handset settings 47
Adjust the earpiece volume
There are 5 volume levels to choose from.
1. Press Menu
2. Press or
press OK
3. Press
press OK
4. Press
to access the menu.
to scroll and display HANDSETand
.
.
or
or
until EARVOLUMEis displayed and
to scroll and select the volume level you
want, then press Save
5. Press Back
repeatedly to return to the idle screen.
Naming a handset
Each handset registered to the base is assigned a number.
You can give a handset a name to match the user or location
e.g. DAVEor OFFICE. The name can be up to 8 characters long.
The number is given automatically and cannot be changed.
1. Press Menu
to access the menu.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 48
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
48 Handset settings
2. Press
press OK
or
or
to scroll and display HANDSETand
.
3. Press
until HANDSETNAMEis displayed and press
OK
.
4. The current handset name is displayed and you are now in
edit mode. Enter a new name for your handset using the
keypad and press OK
to confirm.
If you make a mistake, press Clear
to delete the last character.
5. Press Back repeatedly to return to the idle screen.
When in standby, the new handset name will be shown in the
display. The handset number will be shown in the right of the
display.
Display wallpaper
You can select from 5 wallpapers for your handset display.
1. Press Menu
2. Press or
press OK
to access the menu.
to scroll and display HANDSETand
.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 49
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Handset settings 49
3. Press
or
until PICTUREis displayed and press OK
or
.
4. The current picture is highlighted in the list. Press
to scroll through the different wallpapers and press OK
to
view them.
5. Press Use
to select a wallpaper or Back
to go back to
the pictures list and choose another wallpaper.
6. Press Back
repeatedly to return to the idle screen.
Menu background colour
You can select Blue, Red or Green as the background colour
for the menu.
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display HANDSETand
.
.
or
until MENUCOLOURis displayed and
To exit to standby at any time, press
Back
4. The current menu colour is highlighted. Press
or
.
to select a new menu colour and press Save
to
confirm. SAVEDis displayed.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 50
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
50 Handset settings
The default setting is ON.
Auto-talk
When you receive a call, if the handset is on the cradle you
can answer it by lifting the handset off the cradle, this is
called auto-talk. When you switch auto-talk off, all calls must
be answered by pressing
.
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display HANDSETand
.
.
or
until AUTOTALKis displayed and
4. The current setting is displayed. Press
or
to select ON
or OFFthen press OK . The new setting is displayed.
6. Press Back repeatedly to return to the idle screen.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 51
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Handset settings 51
Beep tones
Your BT Hub Phone 1010 handset emits beeps to alert you to
certain situations. You can set the handset to beep:
To beep as confirmation each time a handset button is
pressed (key beeps).
•
If the battery is low.
•
•
If you go out of range of the base.
These beeps can be switched ON or OFF.
However, beeps which confirm
settings cannot be switched off.
The default setting for all key beeps is
ON.
To switch key beeps On/Off
1. Press Menu
to access the menu.
2. Press
press OK
or
to scroll and display HANDSETand
.
.
3. Press
press OK
or
until BEEPTONESis displayed and
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 52
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
52 Handset settings
4. Press
or
or
until KEYBEEPis displayed and press OK
to select ONor OFFthen press OK
.
5. Press
.
SAVEDis displayed.
6. Press Back
repeatedly to return to the idle screen.
To switch low battery beeps On/Off
During a call, if the battery charge level is low you will hear a
warning beep every 30 seconds to alert you that the batteries
need recharging.
1. Press Menu
2. Press or
press OK
3. Press
press OK
4. Press
press OK
to access the menu.
to scroll and display HANDSETand
.
.
.
or
or
until BEEPTONESis displayed and
until LOWBATTERYis displayed and
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 53
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Handset settings 53
5. Press
or
to select ONor OFFthen press OK
.
SAVEDis displayed.
6. Press Back repeatedly to return to the idle screen.
To switch out of range beeps On/Off
During a call, if the handset moves out of communication
range with the base you will hear a warning beep to alert you
to move closer to the base for improved reception and to
avoid being disconnected.
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display HANDSETand
.
.
or
or
or
until BEEPTONESis displayed and
4. Press
until OUTOFRANGEis displayed and press
OK
.
5. Press
to select ONor OFFthen press OK
.
SAVEDis displayed.
6. Press Back repeatedly to return to the idle screen.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 54
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
54 Handset settings
Handset ring tones and volume
You have a choice of 10 ringtones and 5 volume levels (or you
can switch the ringer OFF). You can select a different ring
tone for external calls (calls from an external incoming
number) or internal calls (calls from another handset).
To change the call ringer volume
1. Press Menu
2. Press or
press OK
3. Music icon is displayed, press OK
4. Press
press OK
5. Press
to access the menu.
to scroll and display MELODYand
.
to confirm.
until RINGVOLUMEis displayed and
.
You can also adjust the volume level
or
to scroll through the volume levels. Press OK
during a call using the
buttons.
or
when you reach the volume you want.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 55
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Handset settings 55
To change the ring tone
1. Press Menu to access the menu.
to scroll and display MELODYand press OK
2. Press
or
.
3. Music icon is displayed, press OK
to confirm.
4. Press until RINGTONEis displayed and press OK
.
5. EXTERNALCALLSis displayed.
To select an external call ringer melody, press OK
to
select.
Or
To select an internal call ringer melody, press
to display
to select.
INTERNALCALLS, then press OK
to select.
6. Press or to scroll and hear the melodies.
7. When you hear the melody you want, press OK
RINGTONESAVEDis displayed.
8. Press Back
repeatedly to return to the idle screen.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 56
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
56
56
Hub base settings
To exit and return to the idle display at
any time, press Back repeatedly.
Reset your BT Hub Phone 1010 to the default settings
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display BASESETTINGSand
.
.
or
until DEFAULTSETTINGSis displayed and
4. Enter the PIN code and press
to confirm.
System PIN
Your BT Hub Phone 1010 has a system PIN code which you
will need to change various settings. The default code is
0000. You may want to change this to prevent unauthorised
changes to your settings.
To change the System PIN code
The default setting is 0000.
1. Press Menu
2. Press or
press OK
to access the menu.
to scroll and display BASESETTINGSand
.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 57
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Hub base settings 57
3. Press
or
until SYSTEMPINis displayed and press OK
.
4. ENTEROLDPINis displayed. Enter your old 4 digit PIN then
press OK
As you enter the PIN number, each
digit is displayed as for security
*
.
reasons.
5. ENTERNEWPINis displayed. Enter a new 4 digit PIN and
press OK . CONFIRMNEWPINis displayed.
Press Clear
incorrect digit.
if you enter an
6. Re-enter your new 4 digit PIN again for verification then
press OK
. SYSTEMPINCHANGEDis displayed.
7. Press Back
repeatedly to return to standby.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 58
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
58
Time settings
Please note:
Time on the handset is taken from the
Hub. During British Summer time you
will need to amend the Hub manager
on the time settings page.
Setting the time
You can set the time in your Hub, so that all handsets show
the right time:
1. Open the Hub Manager: click the icon on your desktop or
2. Read the Hub firmware version in the purple box at the
bottom of the screen.
3. For firmware 6.2 and above:
Click ADVANCEDin the menu, then CONTINUE TO ADVANCED...
Enter the login information: username admin;
password admin
Click SYSTEMin the menu, then TIME
Enter the current time and date
Click APPLY.
4. For firmware starting with 6.1.xxxx
Click ADVANCEDin the menu, then CONTINUE TO ADVANCED
Click SWITCH TO ANOTHER USER
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 59
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Time settings 59
Enter the login information: username admin;
password admin
Click CONFIGURATION
Click CONFIGUREin the horizontal menu on the right
Enter the current time and date
Click APPLY.
5. Your Hub is now set to the correct time. The Hub Phone will
now receive the time during the next incoming call.
Remember to ensure your time is set
Alarm
correctly in the hub as per the
instructions in section,'Setting
the time'.
You can use your BT Hub Phone 1010 handset as an alarm
clock. You can set a single alarm or set an alarm to sound at
the same time each day. When an alarm is set the
be displayed when in standby mode.
icon will
To set an alarm
1. Press Menu
2. Press or
press OK
to access the menu.
to scroll and display TIMESETTINGSand
.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 60
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
60 Time settings
3. ALARMis displayed, press OK
to select.
to select.
4. ON/OFFis displayed, press OK
5. Press
or
to select the type of alarm ONONCE, ON
DAILYor OFFand press OK
.
6. Enter the time in 24 hour format, using 2 digits for the hour
and 2 for the minutes (e.g. for 10.54pm, press 2, 2, 5, 4)
then press OK
to save the alarm. DONEis displayed.
To change the alarm melody
1. Press Menu to access the menu.
2. Press or to scroll and display TIMESETTINGSand
press OK
.
3. ALARMis displayed, press OK
to select.
until SET
to select.
4. ON/OFFis displayed, press
or
You will hear a sample of each melody
as the or button is pressed.
ALARMTONEis displayed and press OK
5. Press
press OK
or
to scroll and select an alarm melody, then
to save. ALARMTONESAVEDis displayed.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 61
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Time settings 61
To cancel an alarm setting
1. Press Menu to access the menu.
2. Press or to scroll and display TIMESETTINGSand
press OK
.
3. ALARMis displayed, press OK
to select.
to select.
4. ON/OFFis displayed, press OK
5. Press
or
until OFFis displayed and press OK
.
DONEis displayed.
6. Press Back
repeatedly to return to standby.
To silence the alarm
When the alarm time is reached, the alarm will sound and
ALARMwill be displayed. The alarm will ring for 1 minute
unless stopped.
1. When the alarm sounds, press Stop
. The handset returns
to standby.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 62
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
62
Using additional handsets
You can register up to five BT Hub phone 1010 handsets to
your BT home hub.
You can use up to two BT Hub phones at any one time to
make calls. See page 17-21 for more information about using
the handsets with BT Broadband Talk.
Follow the automatic registration process on page 9 (see
beginning of the user guide). If you are having problems you
can try this manual method below.
Registering a Hub phone to your BT Home Hub manually
At the Hub:
1. Go into the menu and select REGISTRATION/REGISTER
HANDSET. Select the base required and press OK.
2. A screen prompt is presented on the handset display press
and hold the wireless button on the back of the Hub for 3
seconds (the phone light on the Hub will then flash) then you
can release the button.
3. Press the wireless button. After 3 seconds the phone LED
starts to flash.
4. Press OK on the handset.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 63
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Using additional handsets 63
If your handset is already registered to
5. You are then asked to enter the system PIN (0000) and
a base, the symbol will be shown to
*
press OK.
the right of the base number.
If there are already 5 handsets
registered to the base you will hear a
double beep.
6. Shows REGISTERING HANDSET.PLEASE WAIT.
7. You should then get confirmation that the handset is
Each digit of the PIN code will be
registered.
displayed as a for security reasons.
*
The handset will automatically be allocated the next available
handset number which will be displayed when in standby mode.
Press Clear
incorrect digit.
if you enter an
If you enter the wrong PIN code you
will hear a double beep.
If registration fails, the handset will
return to standby mode and you will
need to repeat the registration
procedure and try a different base
number.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 64
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
64 Using additional handsets
Internal calls
Making internal calls
If an incoming call is received whilst
you are on an internal call you hear
Call Waiting beeps. If you end the
internal call, all the handsets will then
start to ring and show the Caller
Display for the incoming call.
You can make internal calls between two BT Hub phone handsets
that are registered to your hub. This can only occur if there are no
other calls in progress on additional handsets. Once an internal
call is in progress all other handsets will show, MAXIMUMNUMBER
OFCALLSINPROGRESS.
1. Press INT.
2. Enter the other handset number using the keypad
(e.g. ). The called handset will ring and show the calling
handset’s number.
If there is no response, press
handset.
to end the call at your
Receiving internal calls
1. When the handset rings, press
to answer.
2. Press
to end the call.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 65
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Using additional handsets 65
Transferring calls
You can transfer an external call to another handset registered
to your BT Hub Phone 1010 if no other calls are
in progress.
During an external call:
1. Press INT and the number of the other handset. Your caller is
put on hold. The other handset will ring.
2. When the handset answers, press
to transfer the call.
to talk to
If the other handset does not answer, press
the original caller again.
De-register a handset
You cannot deregister the handset that is in use you will need
to pick up an additional handset. For example you cannot
delete handset 1 from handset 1 you will need to do this from
Handset 2, Handset 3, Handset 4 or Handset 5.
You will always have one handset registered to the
BT Home Hub.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 66
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
66 Using additional handsets
Each digit of the PIN code will be
displayed as a for security reasons.
1. Press Menu
2. Press or
press OK
3. Press
to select.
4. SYSTEMPINis displayed. Enter the PIN code using the
keypad and press OK to confirm.
6. Press or to select the handset you want to remove,
remembering that you cannot deregister the same handset
that is in use and press OK
to access the menu.
*
Press Clear
if you enter an
to scroll and display REGISTRATIONand
incorrect digit.
.
If you enter the wrong PIN code you
will hear a double beep.
or
until DE-REGISTERis displayed and press OK
.
7. ARE YOU SURE?is displayed, press Yes
to confirm,
HANDSETDE-REGISTEREDis displayed.
Or
Press No
to cancel.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 67
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
67
Software upgrades
If you have several handsets around
the home and want to upgrade all of
them, you don't need to change the
cradle in the Hub everytime. Just
upgrade all the handsets via the same
cradle within the hub.
Automatic software upgrade
Your BT Home Hub checks regularly for handset software
upgrades. If there is a new version of software available it will send
a message to any registered handsets needing to be upgraded.
If you have handsets located around the home you will need
to place the charging cradle and phone into the front of the
hub to receive the upgrade.
When the handset display shows NEW HANDSET SOFTWARE.
Press Later
if you decide not to
upgrade.
DOWNLOAD NOW?You can either select Yes
immediately or select Later
to upgrade
.
The message will be displayed again 24 hours later. If Yes
is pressed, a message is displayed requesting you to put the
handset on the charger linked to the hub.
When the handset is on the charger
and the software is being upgraded,
you will not be able to use the handset
to receive calls.
Upgrades are free of charge and there
are no call fees associated with
upgrading. It's merely there to give
you the latest version of software
available. These may contain new
features or fixes.
During download, once it is on the charger, the display shows
DOWNLOADING, LEAVE HANDSET IN CHARGER.... The
backlight may turn off but do not remove the handset from
the charger. Leave handset in charger. When the upgrade is
complete, DOWNLOAD COMPLETEis displayed and the
handset resets and automatically re-connects to the base.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 68
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
68 Software upgrades
While the handset is being updated,
the update cannot be cancelled. If you
take out the handset from the cradle,
the update is interrupted. If you put it
back within 90 seconds, the update
will resume and will be completed
correctly. If you do not put it back
within 90 seconds, then the handset
is unusable and you need to use
the rescue mode from the Hub,
see page 69.
Manual software upgrade
If new software is available and you selected to upgrade later,
you can manually upgrade the software at any time using the
handset menu.
1. Press Menu
2. Press or
press OK
3. Press
press OK
to access the menu.
to scroll and display HANDSETand
.
.
It may take 3 minutes to upgrade
successfully.
or
until HANDSETSOFTWAREis displayed and
4. CHECKSOFTWAREis displayed, press OK
to confirm.
5. As requested, place the handset on the charger linked to the
Hub. During download, once it is on the charger, the display
shows DOWNLOADING, LEAVE HANDSET IN CHARGER....
The backlight may turn off but do not remove the handset
from the charger. Leave handset in charger. When the
If you try to upgrade using the menu
and there is no upgrade available, you
will see the message NOUPGRADE
AVAILABLE.
upgrade is complete, DOWNLOAD COMPLETEis displayed and
the handset resets and automatically re-connects to the base.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 69
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Software upgrades 69
Rescue mode
If the upgrade was unsuccessful, or if the handset was lifted
from the charger during the upgrade for more than 90
seconds, the user can initiate a new upgrade of the handset
software from the hub manager.
Rescue mode is applied when a
To use the rescue mode on the Hub Manager:
handset appears dead because the
handset was removed while
upgrading.
1. Make sure your handset is in the cradle plugged into the hub.
2. Open the Hub Manager. Click the icon on your desktop or
3. Click TELEPHONESin the menu
4. Click the Rescue button.
5. You won't get any indications on the handset screen while the
rescue is taking place but it will return to the idle screen after
about five mins and give you an indication of success at the
end.
You should call the help desk if the rescue mode
was unsuccessful.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 70
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
70
Help
Many common problems are caused by incorrect connections. Please reboot your hub by turning
it on and off (from the mains) and check that your BT Hub Phone 1010 has been correctly set up
before ringing the Helpline. You can also restart the Hub by logging into the advanced settings
and selecting the option to restart/return to factory settings.
to the support and advice section for information.
No display
The batteries may be flat or dead. Recharge or replace the batteries, see page 8.
No incoming calls to your handsets?
Your BT Broadband Talk service may not be set up. You could also check your call routing settings
(eg you may have call divert in place).
The ringer volume may be set too low for you. See page 54 to adjust the volume.
Also, check your Hub manager and BT Broadband Talk self care pages for your current settings.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 71
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Help 71
Buzzing noise on my radio, TV, computer or hearing aid
Sometimes your BT Hub Phone 1010 can interfere with other electrical equipment if it is placed
too close.
It is recommended that you place your BT Hub Phone 1010 at least one metre away from such
appliances to avoid any risk of interference.
The handset charger is not working
You should hear a beep when placing the handset in the charger and also see a scrolling battery
charging indicator.
Check that the power adaptor is properly plugged into the charger.
Make sure your handset has slotted correctly into the charger.
Check the batteries are fitted correctly into the handset.
Check you are using the correct power adapter supplied.
I cannot dial numbers from the phone book
You need to store the full area code when you’re using BT Broadband Talk.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 72
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
72 Help
Caller’s number is not displayed
The number has been withheld by the caller, is unavailable or is an
international call, see page 40.
BT Hub Phone Helpline
for support and advice. You can also call the dedicated Helpline on 0845 600 7030. Lines are
open 24 hours, 7 days a week.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 73
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
General information
73
•
It is recommended that advice from a qualified
medical expert be sought before using this product in
the vicinity of emergency/intensive care medical
equipment.
Safety
General
•
Only use the power supply included with the product.
Using an unauthorised power supply will invalidate
your guarantee and may damage the telephone.
The item code for the power supply is 027300
OR 34503.
•
•
It is recommended that if you have a pacemaker
fitted you check with a medical expert before using
this product.
Your product may interfere with other electrical
equipment, e.g. TV and radio sets,clock/ alarms and
computers if placed too close. It is recommended
that you place your product at least one metre away
from such appliances to minimise any risk of
interference.
Check the item code originally supplied before
ordering a new one.
•
For the handset use only approved Nickel Metal
Hydride (NiMH) rechargeable batteries. Never use
other batteries or conventional alkaline batteries.
They could lead to a short circuit or destroy the
battery casing.
•
Never dispose of batteries in a fire. There is a serious
risk of explosion and/or the release of highly toxic
chemicals.
•
•
Recommended batteries should have a power rating
of 600mAh 1.2v or greater mAh. You should always
replace both batteries at the same time and use the
rating supplied originally.
Hearing aid
Please note that the BT Hub Phone 1010 works by
sending radio signals between the handset and base.
These signals may interfere with some hearing aids,
causing a humming noise.
Do not open the handset (other than to change
batteries). This could expose you to high voltages or
other risks. Contact the Helpline for all repairs.
IMPORTANT
This equipment is not designed for making emergency
telephone calls when the power fails. Alternative
arrangements should be made for access to emergency
services.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 74
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
74 General information
Cleaning
Product disposal instructions
Simply clean the handset and hub with a damp (not
wet) cloth, or an anti-static wipe. Never use
household polish as this will damage the product.
Never use a dry cloth as this may cause a static shock.
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed
with other household or commercial waste at the end
of its working life.
Environmental
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landfill.
•
•
Do not expose to direct sunlight.
The product may heat up when the batteries are
being recharged. This is normal. However, we
recommend that you do not place the product on
antique/veneered wood to avoid damage.
•
•
Do not stand your product on carpets or other
surfaces which generate fibres, or place it in locations
preventing the free flow of air over its surfaces.
Product disposal instructions for
residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For
more information please contact your local authority
or the retailer where the product was purchased.
Do not submerge any part of your product in water
and do not use it in damp conditions, such as
bathrooms.
•
•
Do not expose your product to fire, explosive or other
hazardous conditions.
Product disposal instructions for
business users
There is a slight chance that your phone could be
damaged by an electrical storm. We recommend that
you unplug the power and telephone line cord for
the duration of the storm.
Business users should contact their suppliers and
check the terms and conditions of the purchase
contract and ensure that this product is not mixed
with other commercial waste for disposal.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 75
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
General information 75
Within the 12 month guarantee period:
Guarantee
If you experience difficulty using the product, prior to
returning it, please read the ‘Help’ section beginning
on page 70, or contact the BT Hub Phone 1010
Helpline on 0845 600 7030, Lines are open 24
hours, 7 days a week.
Your BT Hub Phone 1010 digital cordless telephone is
guaranteed for a period of 12 months from the date
of purchase.
Subject to the terms listed below, the guarantee will
provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Hub Phone
1010, or any component thereof, (other than
batteries), which is identified as faulty or below
standard, or as a result of inferior workmanship or
materials. Products over 28 days old from the date of
purchase may be replaced with a refurbished or
repaired product.
In the unlikely event of a defect occurring, please
follow the Helpline’s instructions for replacement or
repair.
Outside of the 12 month guarantee period:
If your product needs repair after the guarantee
period has ended, the repair must meet the approval
requirements for connection to the telephone
network.
The conditions of this guarantee are:
•
The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
If you have to return your BT Hub Phone 1010
If the Helpline is unable to remedy your problem they
will ask you to return the product. Where possible,
pack the product in its original packaging. Please
remember to include all parts, including the line
cords, power supply units and the original batteries.
(Please note that we cannot take responsibility for
goods damaged in transit.) Please obtain and keep
proof of posting from the Post Office.
•
•
Proof of purchase is required.
The equipment is returned to BT or its agent as
instructed.
•
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
•
This guarantee does not affect your statutory rights.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 76
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
76 General information
For your records
Technical information
Only use the approved base mains power supply, or
item code 027300 or 34503.
Date of purchase:
When ordering replacements please check what the
item code is for the originally supplied power supply
unit.
Place of purchase:
Serial number:
Only use approved AAA NiMH rechargeable batteries.
R&TTE
This product is intended for use within the UK for
connection to the public telephone network.
For guarantee purposes proof of purchase is required
so please keep your receipt.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
Enter your base PIN here:
[
/
/
/
]
(See page 56 for more information)
Declaration of Conformance
Hereby, Thomson Telecom, declares that this BT Hub
Phone 1010 is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for the BT Hub
Phone 1010 is published on the website:
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 77
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 78
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 79
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 80
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Offices worldwide
The services described in this publication are subject to availability and
may be modified from time to time. Services and equipment are provided
subject to British Telecommunications plc’s respective standard conditions
of contract. Nothing in this publication forms any part of any contract.
© British Telecommunications plc 2006.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China
BT Hub Phone 1010 Issue 2 (12/06) 3
|