1
BCR31DAB
Introduction and Contents
Thank you for buying this Bush product, which is designed to give you many years of trouble-free service.
You may already be familiar with using a similar unit, but please take time to read these instructions.
They are designed to familiarise you with the unit’s many features and to ensure you get the very best from your
purchase.
Safety is important
Your safety and the safety of others are important.
Please therefore, ensure you read the “Safety Instructions” before you operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the below free phone number to discuss the
problem with one of our qualified service engineers.
Australia.
New Zealand
Bush Warranty: 1800 509 394
Bush Warranty: 0800 450 259
Contents
Introduction and Contents …………………….………………………………………………….……………....
Safety Instructions …………………………………………………………………………………………………
Your DAB+ Radio …..…………………………………………………………………………….……………....
What is DAB+..………………………………………………………………………..…………….……………...
Getting Started …………………………………………………………………….……………...………………
Using DAB+ Radio...……………………..…………………………………………….……………...………….
Using Presets………………………………………………………………………………………………………
Using FM Radio …………………………………………………………………….……………...……………..
System Setup…………………………………………………………………….……………...………………..
Troubleshooting and Technical Specification……………………………….……………...…….……………
Warranty…………………………………………………………………….……………...………………………
2
3
4
5
6-7
8-10
11
12-13
14-19
20
21
2
BCR31DAB
Safety Instructions
Ensure that you read all of the safety instructions before using this unit.
Safety Considerations
n
Position the power cable and other connected cables so that they are not likely to be walked on, pinched or
where items can be placed on or against them.
n
n
n
n
n
n
Do not use the unit in humid or damp conditions.
Do not allow the unit to get wet.
Never allow children to insert foreign objects into holes or slots on the unit.
Do not cover the ventilation with items such as tablecloths, curtains, etc. This may cause overheating.
No naked flame sources, such as lit candles, should be placed on or near the unit.
Do not expose the unit to dripping or splashing water, and no objects filled with liquids, such as vases, should be
placed on or near the apparatus.
n
Do not place the unit in closed cabinet without proper ventilation.
Cleaning
n
n
Disconnect the unit from the mains supply before cleaning.
Do not use any liquids or aerosol cleaners, as this may damage the unit. Use a soft, dust free cloth.
Servicing
n
n
There are no user serviceable parts in the unit. When servicing, refer to qualified service professional.
Consult your retailer if you are ever in doubt about the installation / operation / safety of the product.
3
BCR31DAB
Your DAB+ Radio
1.
2.
3.
4.
5.
PRESET Button
6.
LCD Display
11.
12.
13.
DC Jack
SELECT/NAV Button 7.
DAB+/FM Button
ALARM Button
STANDBY Button
MENU Button
Aerial
8.
Headphone Jack
Button
Button
9.
SNOOZE Button
10.
Control
DAB+ and FM
Press the Standby Button to turn the radio on or off.
STANDBY
Press the Menu Button to enter the Main Menu or select other menus.
MENU
Press the DAB+/FM Button to switch between DAB+ and FM modes.
Press the Alarm Button once, to set alarm1 and press again to set alarm2.
DAB+/FM
ALARM
Press and hold the Preset Button to enter the preset options.
(Note: for detail please refer page 11)
PRESET
Press the Select/Nav Button to an option or confirm.
a. Press to decrease or increase the volume level
SELECT/NAV
b. In DAB+ mode, press the SELECT/NAV Button then press the
or
Buttons to select different DAB+ stations or options.
c. In FM mode, press the SELECT/NAV Button, then press the
Buttons to adjust the FM frequency, or press and hold the
to auto search FM Stations.
or
or
Buttons
a. When alarm is activated, press the Snooze Button to delay the alarm for 5 minutes.
b. Press the Snooze Button to set the radio sleep time.
4
BCR31DAB
What is DAB+
DAB+ was developed in Europe by a consortium of broadcasters and manufacturers. DAB+ uses digital compression
techniques to transform the source material, i.e. music and speech, into better quality audio.
Interference free reception
Analogue systems suffer from an effect called “multipath distortion”. This is caused because waves do not behave in
an orderly fashion, but bounce and reflect off buildings etc. DAB+ sees this as an advantage and uses the direct and
reflected signals to actually reinforce the end result, allowing for better service more of the time.
No need to re-tune
A single DAB+ frequency can be used to cover the whole of the Australia, so solving many of the problems
experienced with the earlier analogue system. DAB+ scans automatically and tunes-in all of the available stations in
your area.
Scolling text
Broadcasters can transmit text to your radio. This way you can read the name of the DJ, artist, song title or any other
information they choose.
DAB+ coverage
Check your local coverage at www.digitalradioplus.com.au, or alternatively text 0409-DRPLUS to receive an SMS
confirming whether you reside in a DAB+ broadcast area.
5
BCR31DAB
Getting Started
Carefully remove your DAB+ Receiver from the box. You may wish to store the packaging for future use.
In the Box
Inside the box you will find:
n
n
n
DAB+ Radio (Main Unit)
Power Adapter
User Guide
Positioning your DAB+ Radio
Place your DAB+ Receiver on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
n
n
n
n
n
Where the radio will be exposed to direct sunlight.
Where the radio will be close to heat radiating sources.
Where the humidity is high and ventilation is poor.
Where it is dusty.
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Aerial
The aerial should be extended to ensure you receive the best reception possible in both DAB+ and FM radio modes. It
may be necessary to alter the position of the DAB+ RADIO and /or aerial to achieve the best signal.
Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The headphone socket is located on the back
of this unit. Headphones are not supplied with this DAB+ Receiver.
Turning the Unit On/Off
Connect the power adapter to the DC Jack on the back of the unit. Then insert the power adapter into the wall outlet.
Turn the mains power on and then press the STANDBY Button to turn on the unit. Press the Standby Button to turn
the unit to Standby.
When you turn on your radio for the first time you will be presented with this
image.
6
BCR31DAB
Getting Started
@
Note: When you turn on the radio it will automatically search and store all the available stations. You should conduct an
additional Full Scan to ensure all stations are picked up and stored. It is also recommended every few months to
run a new scan to pick up any new DAB+ that may have begun broadcasting after purchasing your DAB+ radio.
For initial use, conduct a full scan to auto search and store all DAB+ radio stations. Press the Menu Button and use
the or Buttons to select the Full Scan option. Press the Select/NAV Button to confirm.
The Full Scan may take you 1-2 minutes to complete, after all stations are stored you will see:
@
Note: a. The DAB+ stations will be displayed and stored in alphanumeric order. The first station in the list will begin to play.
b. If no DAB+ signal is found, it may be necessary for you to relocate your radio.
7
BCR31DAB
Using DAB+ Radio
DAB+ Menu Options
Volume Control
Adjust the radio volume by pressing the
or
Buttons.
8
BCR31DAB
Using DAB+ Radio
To View Station Information in DAB+ Mode
Press the MENU Button then press the SELECT/NAV Button consecutively to show
the different program information.
Program Type (PTY):
This is a description of the type of program provided by the DAB+ station or by the
broadcaster.
Signal Strength:
Show a signal bar with the strength of the current station.
Station Name:
This will show the station that is broadcasting the program you are listening to.
Frequency:
This displays the station transmission frequency.
Signal Error:
This displays the signal error rate being received from 0 to 100.
a. 0 means no error signal has been detected.
b. While 100 means it is an extremely bad signal.
Signal Information:
This shows the digital bit rate and the signal mode.
Time:
This displays the time provided by the broadcaster.
Date:
This displays the date provided by the broadcaster.
Dynamic Label Segment (DLS)
This is scrolling text information supplied by the DAB+ station or by broadcaster.
9
BCR31DAB
Using DAB+ Radio
To Show the Signal Strength in DAB+ Mode
1. Press the MENU Button during play, and ‘Info’ will be displayed on the screen. Then press the SELECT/NAV
Button to confirm.
2. Press the MENU Button and the SELECT/NAV Button repeatedly until Signal Strength is shown on the display. A
signal bar will be displayed as shown below.
The indicator on the signal bar shows the minimum acceptable
signal level.
@
Note: Stations with signal strength below the minimum signal level will
not provide a steady stream of audio.
DRC (Dynamic Range Control)
You can set the level of the compression of stations to eliminate the differences in dynamic range or sound level
between radio stations.
@
Note: Set DRC to off indicates no compression, set DRC to low indicates little compression, and set DRC to high shows
maximum compression.
1. Press the MENU Button, then press the
or
Buttons to select the DRC menu.
2. Press the SELECT/NAV Button to confirm.
3. Press the
or
Button to select ideal DRC Mode. Press the SELECT/NAV Button to confirm.
Prune Order
@
Note: Pruning Radio order will remove inactive stations from the station list.
1. Press the MENU button, then press
or
to select Prune menu.
2. Press the SELECT/NAV button to confirm.
3. Press
or
to select Yes, and then press SELECT/NAV to confirm.
10
BCR31DAB
Using Presets
Setting Station Presets
Your radio can store 10 DAB+ & 10 FM station presets. To store presets:
@
Note: This is the same for DAB+ and FM Radio stations.
1. Press the DAB+/FM Button to select the mode you wish to set.
2. While playing your favourite station, press and hold the PRESET Button.
3. Press the
or
Button to cycle through the preset stations store numbers, 1-10.
4. Then select your preferred preset station number and press the SELECT/NAV Button to confirm.
Playing a Preset Station
To select a stored station:
1. Press the DAB+/FM Button to select the mode you wish to play.
2. Press the PRESET Button to enter ‘Preset Recall’ setting.
3. Press the
confirm.
or
Buttons to select your preset number and then press the SELECT/NAV Button to
11
BCR31DAB
Using FM Radio
1. Press the DAB+/FM Button to switch to FM Mode from DAB+ Mode.
2. Once in FM mode, it will start at the beginning of the FM frequency range (87.50MHz) or it will play the last FM
station you were listening to.
3. To manually change the FM frequency, press the SELECT/NAV Button and then immediately press the
or
to change the frequency by 0.05MHz.
4. To auto-search in FM Mode, press the SELECT/NAV Button and then press and hold the
or
Buttons and it will skip forwards or backwards to the next available station.
@
Note: 1. The display will show the frequency changing until it stops on the next station.
2. After it reaches the end of the frequency range, it goes back to the start.
FM Menu Options
12
BCR31DAB
Using FM Radio
To View Station Information in FM Mode
Press the MENU Button then press the SELECT/NAV Button consecutively
to show the different program information
Program Type (PTY):
This is a description of the type of program provided by the FM station or by
the broadcaster.
Station Name
This displays the transmission (station name) of the station you are listening
to.
Audio Type
This will display the audio type of the station you are listening to. It will either
be stereo or Mono.
Time:
This displays the time provided by the broadcaster.
Date:
This displays date provided by the broadcaster.
Radio Text
This is scrolling text information supplied by the FM broadcasters. It may
comprise of information on music titles or details of the program and is
provided by the broadcaster.
Scan Setting
1. Press the MENU Button, and then press
or
to select Scan Setting menu.
2. Press the SELECT/NAV Button to confirm.
@
Note: You can choose between Strong Stations Only and All Stations. If you choose Strong Stations Only, the menu
will show only the stations with strong signal strength. If you choose All Stations, all detected stations will be shown.
3. Press the
or
to select your preferred option, and then press the SELECT/NAV to confirm.
13
BCR31DAB
System Setup
How to Enter System Setup
1. Press the MENU Button, and then press the
or
to select System Menu.
2. Press the SELECT/NAV Button to confirm. Once confirmed the below screen will show.
3. Press the
or
to cycle through the System Menu options, including ‘Time’, ‘Backlight’, ‘Factory
Reset’ and ‘SW version’.
How to Set the Clock
@
Note: You can set the clock two ways - ‘Manually’ or by ‘Auto Update’.
1. Select the System Menu and then select the Time Setting. Press the SELECT/NAV Button to confirm.
Choose 12/24 Hour Format
1. Once in the Time System Menu, you can select to set the time in either 12 or 24 hour format.
2. Press the
confirm.
or
Buttons to choose either 12 hour or 24 hour time, then press the SELECT/NAV to
14
BCR31DAB
System Setup
Set Time / Date (Manually)
1. In the time menu, press
to confirm.
or
to select Set Time/Date option, then press the SELECT/NAV button
à
2. Press the
3. Press the
or
or
Buttons to change the hours and then press the SELECT/NAV Button to confirm.
Buttons to change the minutes and then press the SELECT/NAV Button to confirm.
Then you will be asked to set the date.
Set Date Format
1. In the Time System Menu, press the
or
Buttons to select the set date option, then press the
SELECT/NAV Button to confirm.
@
Note: You can choose to set the date as either ‘MM-DD-YYYY’ or ‘DD-MM-YYYY’.
2. Press the
to confirm.
or
Buttons to select the preferred date format and then press the SELECT/NAV Button
3. Press the
4. Press the
or
or
to change the month or date and then press the SELECT/NAV Button to confirm.
to change the month or date and then press the SELECT/NAV Button to confirm.
5. Press the
or
to change the year and then press the SELECT/NAV Button to confirm.
Auto Update
1. In the Time System Menu, press the
or
to select Auto Update option, and then press the
SELECT/NAV Button to confirm. The Auto Update option will automatically update the date and time based on the
information provided by the DAB+ Broadcaster.
@
Note: You can choose ‘Auto update from DAB+’ and ‘No update’.
2. Press the
or
to select ‘Auto update from DAB+’, then press the SELECT/NAV Button to confirm.
15
BCR31DAB
System Setup
How to Set Alarm
@
Note: Ensure that the time is set correctly before you set the Alarm.
1. Press the ALARM Button to select the Alarm Setting and to set alarm1 to set the alarm time you desire. If you
wish to set alarm2, press the ALARM Button twice.
2. Press the SELECT/NAV to confirm to enter either alarm1 or alarm2.
3. Press the
4. It will now ask you to set the Alarm time, press the
SELECT/NAV Button to confirm. Use the same method for setting the minutes.
or
to select Alarm option as on or off. Press the SELECT/NAV Button to confirm.
or Buttons to alter the hour, and then the
5. Press the SELECT/NAV Button to confirm, then press the
or
to set the duration time of the alarm
sound. You can select either 15, 30, 45, 60 or 90 minutes.
@
Note: The alarm will sound until the selected duration time is finished.
6. Press the SELECT/NAV Button to confirm. Press the
or
Buttons to set the alarm source, you can
choose between Buzzer, DAB+ or FM modes.
7. Press the SELECT/NAV Button to confirm. Press the
or
Buttons to set the frequency of alarm, you
can choose between daily, weekdays, weekends or once.
16
BCR31DAB
System Setup
8. Press the SELECT/NAV Button to confirm. Press the
or
Buttons to set the alarm volume level.
9. Press the SELECT/NAV Button to confirm and ‘Alarm Saved’ will display on the screen and is now set. You can
also set Alarm 2 by following the same steps.
SNOOZE
1. When the Alarm sounds and you wish to continue snoozing, press the SNOOZE Button to activate the snooze
function and postpone alarm for 5 minutes.
2. The radio will go into Standby mode and start to count down the 5 minutes unit snooze is over, see below.
3. The Alarm will sound again after the snooze time has elapsed, at this time, if you press the SNOOZE Button
again and it will count down for another 5 minutes.
To Turn Off Alarm
1. Press the ALARM Button to enter alarm1 or Alarm2 setting.
2. Press the SELECT/NAV Button to confirm and change the Alarm status from on to off. Press the SELECT/NAV
Button to confirm. Then follow the steps, until you reach ‘Alarm Saved’.
How to Set Radio Sleep Time
1. Press the SNOOZE Button during play and the display will show - “Set sleep time à Sleep Off”, make sure
neither alarm is set when setting sleep time.
2. Press the SNOOZE Button repeatedly to select the Sleep time on and the amount of time before you wish the
radio to automatically switch off. You can select - Sleep Off, 15, 30, 45, 60 or 90 minutes.
3. Press the SELECT/NAV Button to confirm, and then sleep icon
will be displayed.
4. To view the set sleep time, press the SELECT/NAV Button.
5. Once set the radio will automatically turn to Standby mode after the set time has elapsed.
17
BCR31DAB
System Setup
How to set Backlight
@
Note: You can adjust the backlight level to ‘High’, ‘Medium’ and ‘Low’. High backlight will make the backlight brightest and
easy to view. Low backlight will dim the brightness using less power and making it less distracting at night.
Setting Backlight for Power on Mode
1. In System Menu, select the Backlight Menu and press the SELECT/NAV Button to confirm.
à
2. In the Backlight Menu, use the
Button to confirm.
or
to select the Power On setting and press the SELECT/NAV
à
3. Press the
or
Buttons select your ideal backlight option for Power On Mode; ‘High’, ‘Low’ and
‘Medium’. Then press the SELECT/NAV Button to confirm.
Setting the Backlight for Standby Mode
1. In System Menu, select the Backlight Menu and press the SELECT/NAV Button to confirm.
2. In the Backlight Menu, use the
or
to select the Standby Mode setting and press the
SELECT/NAV Button to confirm.
3. Press the
or
Buttons select your ideal backlight option for Power On Mode; ‘High’, ‘Low’ and
‘Medium’. Then press the SELECT/NAV Button to confirm.
18
BCR31DAB
System Setup
How to Factory Reset
@
Note: Doing this will delete all the preset stations, alarms and time settings, and return the radio to its original factory settings.
1. Press the MENU Button and then press the
or
Buttons to select the System Menu. Press the
SELECT/NAV Button to confirm, and then press the
or
to Factory Reset option.
2. Press the SELECT/NAV Button to confirm
3. Once selected you will be asked if you want to conduct a Factory Reset. Press the
or
Buttons to
select ‘Yes’ or ‘NO’. Then press the SELECT/NAV Button to confirm, and then radio will begin to reset.
How to get SW Version
1. Once in System Menu, press the
or
to select SW version Setting.
2. Press the SELECT/NAV to confirm. You will now be able to view the software information of this radio.
19
BCR31DAB
Troubleshooting and Technical Specification
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult you retailer or service professional.
WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the warranty.
PROBLEM
POSSIBLE CAUSE
REMEDY
No sound
Headphones maybe connected
Volume not adjusted
Disconnect the headphones
Adjust the Volume
Power cord is not correctly
connected
Connect the power cord properly
Turn off the unit, disconnect the mains
plug, and reconnect after a few
seconds
Unit Buttons are not working
Radio poor reception
Electrostatic discharge
Weak radio aerial signal.
Aim the aerial for best reception, and
ensure it is fully extended.
Interference caused by the vicinity of
electrical equipment like TVs, Video
Recorders, Computer, Thermostats,
Fluorescent Lamps (TL) engines etc.
Keep the unit away from other
electrical equipment
Technical Specification
Specifications ……………………………………………….. DAB+ and FM radio
Speaker Power…………………………………………..….. 1 W
Frequency Range .………………………………………….
FM: 87.5-108MHz
DAB+: 174 – 240MHz
LCD Display .……………………………..………………….
High resolution display
Power Supply .………………………………………………. AC/DC Adaptor: DC 9V, 600mA
Max Power Consumption….……………………………….. 5W
Dimension .……………………………….………………….
172mm x 122mm x 54mm
20
BCR31DAB
Warranty
Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship
for one year after the original date of purchase. This product is for normal domestic and office use only. This warranty
does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such us
lightning or power surges or any alternation that affects the performance or reliability of the product.
In the unlikely event that your product fails to work normally, please contact the Bush Warranty on 1800 509 394
(Australia) or 0800 450 259 (New Zealand) and have your receipt of purchase on hand.
This warranty is subject to the following provisions:
l
l
It is only valid within boundaries of the country of purchase
The product must be correctly assembled and operated in accordance with the instructions contained in the
manual
l
l
l
l
This product must be used solely for domestic purposes
The warranty does not cover accidental damage
The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repair
The manufacturer disclaims any liability for incidental or consequential damaged
This warranty is in addition to, and does not diminish, your statutory or legal rights.
PO BOX 6287
Silverwater NSW 1811
Bush Warranty: 1800 509 394 Australia
Bush Warranty: 0800 450 259 New Zealand
21
|