Audiovox CDM 8410 User Manual

CDM-8410ALTELCover.qxd 2003.12.12 12:37 AM Page 1  
REV.00 ALTEL  
5U010000305  
Owners  
Manual  
555 Wireless Boulevard ¥ Hauppauge, New York 11788  
'2003 Audiovox Communications Corporation  
8410altel 2003.12.12 12:25 AM Page 2  
TABLE OF CONTENTS  
CHAPTER 1 BEFORE USING YOUR PHONE .........7  
Inside the Package.................................................8  
Handset Description ..............................................9  
Function Keys.......................................................10  
Display Indicators.................................................11  
Using the Battery..................................................13  
Installing the Battery ...........................................13  
Removing the Battery .........................................13  
Charging the Battery............................................14  
Power Connection...............................................14  
Battery Charging Time ........................................15  
Battery Talk & Standby Times.............................15  
Battery Information ..............................................16  
CHAPTER 2 BASIC OPERATION...........................17  
Using the Phone...................................................18  
Turning the Phone On.........................................18  
Turning the Phone Off.........................................18  
Using the Menu.....................................................19  
Menu Summary.....................................................20  
Basic Functions....................................................23  
Making a Call ......................................................23  
Pause Feature.....................................................24  
Speaker Phone ...................................................24  
Answering a Call .................................................25  
Caller ID Function ...............................................25  
Call Waiting Function ..........................................26  
Voice Memo Display ...........................................26  
Etiquette Mode....................................................26  
Adjusting Volume.................................................27  
Functions During a Call.........................................28  
Messaging...........................................................28  
Mute (Unmute) ....................................................28  
Scratchpad..........................................................28  
Send My Phone # ...............................................29  
My Profile ............................................................29  
Table of Contents - Page 1  
8410altel 2003.12.12 12:25 AM Page 4  
TABLE OF CONTENTS  
TABLE OF CONTENTS  
Voice Privacy.......................................................29  
Location...............................................................29  
Speaker Phone Mode .........................................30  
VS Menu.................................................................71  
Voice Memo........................................................71  
Call Answer......................................................... 72  
Voice Command .................................................73  
Voice Dial............................................................75  
Voice Setting.......................................................77  
VR Mode................................................................79  
Name ..................................................................79  
Dial.......................................................................80  
Redial...................................................................80  
Voice Memo ........................................................81  
Phone Book ........................................................81  
Cancel..................................................................81  
CHAPTER 3 MEMORY FUNCTION .......................31  
Storing Phone Numbers......................................32  
Text Input Methods ..............................................33  
Entering Characters............................................33  
Alpha Mode [ABC] ..............................................33  
T9TM Predictive Text Mode [T9TMABC] .................34  
Numeric Mode [123] ...........................................36  
Symbol Mode [SYM]...........................................36  
Speed Dialing .......................................................37  
Speed Dial ..........................................................37  
One-Touch/Two-Touch Dialing............................37  
Phone Book ..........................................................38  
Find.....................................................................38  
Add New Entry....................................................40  
Edit Existing Entry...............................................40  
Edit Group...........................................................41  
Edit SMS Group..................................................42  
Speed Dial ..........................................................44  
My Profile............................................................45  
Recent Calls .........................................................46  
Dialed..................................................................46  
Received.............................................................47  
Missed.................................................................48  
Call Timers..........................................................49  
CHAPTER 5 SECURITY FEATURES......................83  
Security Features .................................................84  
Security...............................................................84  
CHAPTER 6 SUPPLEMENTARY FUNCTIONS......91  
Schedule ...............................................................92  
Event...................................................................92  
Alarm...................................................................93  
Calculator..............................................................94  
World Clock ..........................................................95  
Stopwatch.............................................................96  
CHAPTER 7 VOICE MAIL AND TEXT MESSAGES ...97  
Two-Way SMS.......................................................98  
Message Indicators.............................................98  
Received Message Notification ..........................98  
Checking Messages ............................................99  
Checking Received Voice Mail Message............99  
Checking Received Text Message......................99  
Sending Text Messages.....................................100  
Sending New Text Messages ...........................100  
CHAPTER 4 SETTINGS..........................................53  
Settings .................................................................54  
Sounds................................................................54  
Display ................................................................59  
System................................................................63  
Location ..............................................................65  
Others .................................................................66  
Page 2 - Table of Contents  
Table of Contents - Page 3  
8410altel 2003.12.12 12:25 AM Page 6  
TABLE OF CONTENTS  
TABLE OF CONTENTS  
Inbox....................................................................102  
Inbox Menu.......................................................102  
Outbox.................................................................105  
Outbox Menu ....................................................105  
Web Alerts...........................................................107  
Saved...................................................................108  
My Object............................................................109  
Erase All..............................................................110  
Settings ...............................................................111  
Settings Menu ...................................................111  
CHAPTER 11 SAFETY INFORMATION.................127  
Safety Information for Wireless Handheld Phones .128  
Exposure to Radio Frequency Signals .............128  
Antenna Care....................................................129  
Phone Operation...............................................129  
Driving Safety ...................................................129  
Electronic Devices ............................................130  
Other Safety Guidelines....................................132  
Precautions and Warnings................................133  
Operating Procedures.......................................134  
Safety Information for FCC RF Exposure........135  
Caution..............................................................135  
SAR Information.................................................136  
FDA Consumer Update......................................138  
CHAPTER 8 MAKING AN EMERGENCY CALL..115  
Emergency Calling.............................................116  
911 in Lock Mode..............................................116  
911 Using Any Available System.......................116  
CHAPTER 12 WARRANTY..................................147  
Protect Your Warranty .......................................148  
12 Month Limited Warranty...............................149  
CHAPTER 9 AXCESS & INTERNET.....................117  
AXCESS...............................................................118  
Start AXCESS...................................................118  
Downloading Applications.................................118  
Downloading Melodies/Wallpapers...................119  
Applying Melodies/Wallpapers ..........................119  
Checking Data Folder Memory.........................119  
Erasing an Application ......................................120  
Start Internet Browser.......................................121  
Access the Internet ...........................................121  
Browser Menu ....................................................122  
CHAPTER 10 DATA SERVICE...............................125  
Data SVC.............................................................126  
Connection........................................................126  
WAP/AXCESS ..................................................126  
“Licensed by QUALCOMM Incorporated under one or more of the following Patents :  
U.S.Patent No. 4,901,307 U.S.Patent No. 5,056,109 U.S.Patent No. 5,099,204 U.S. Patent No.  
5,101,501 U.S. Patent No. 5,103,459 U.S. Patent No. 5,107,225 U.S.Patent No. 5,109,390.”  
Page 4 - Table of Contents  
Table of Contents - Page 5  
8410altel 2003.12.12 12:25 AM Page 8  
Chapter 1  
BEFORE USING  
YOUR PHONE  
Please read and fully understand this manual before  
using your phone.  
This chapter addresses your phone, its keys and display  
icons, and covers the charging and proper use of  
the battery.  
Inside the Package  
Handset Description  
Function Keys  
Display Indicators  
Using the Battery  
Charging the Battery  
Battery Information  
Page 6  
Chapter 1 - Page 7  
8410altel 2003.12.12 12:25 AM Page 10  
INSIDE THE PACKAGE  
HANDSET DESCRIPTION  
Thank you for purchasing the CDM-8410 wireless  
handset. The phone’s giftbox contains all of the items  
listed below.  
This phone is a CDMA2000 1X digital phone with data  
and web browsing capabilities. The CDM-8410 weighs  
3.1 oz. and the dimensions are 3.3” x 1.6” x 9”.  
Antenna  
For best call  
quality, fully  
extend the  
antenna during  
the call.  
Earpiece  
Earjack  
Standard Battery  
LCD  
Volume  
Display  
Button  
Adjusts the  
earpiece  
and ringer  
volume.  
Function  
Keys  
Handset  
AC Adapter  
Hand strap  
Send key  
END/  
Power Key  
Keypad  
Microphone  
User Manual  
NOTE: Immediately report any product defects or  
missing items to the place of purchase.  
Page 8 - Chapter 1  
Chapter 1 - Page 9  
8410altel 2003.12.12 12:25 AM Page 12  
FUNCTION KEYS  
DISPLAY INDICATORS  
SEND KEY: Press to make or receive a  
call. Press and hold to view most recently  
dialed numbers.  
Signal Strength  
Indicates current signal strength.  
The more lines, the stronger the signal.  
Roaming  
Phone is outside of its home area.  
END KEY: Press to terminate a call or to  
return to the idle screen. Press and hold  
to turn the phone on/off.  
Service Indicator  
indicates call is in progress,  
indicates  
indi-  
NAVIGATION KEY:  
the phone is in standby mode, and  
In Idle Mode-Press up to access the  
phone book, down to access  
the messaging menu, right  
for AXCESS(Axcess) and left  
for Mobile Web.  
cates the phone cannot receive a signal  
from the system.  
Message  
A text or voice mail message is waiting.  
Inside the menu-Within a menu, use to  
Text  
Message  
Voice  
Message  
Voice & Text  
Message  
scroll through menu  
options. Press  
select an option.  
to  
Digital Mode  
Phone is operating in digital mode.  
SOFT KEYS: (Soft 1) Press to access the  
menu or function displayed on the bottom  
line. (Soft 2) Press to enter the Find fea-  
ture of the phone book, or to return to the  
previous page. Press to clear a digit from  
the display.  
Battery  
Battery charging level–the more blocks,  
the stronger the charge.  
Mute  
Phone is mute during a call.  
LOCK KEY: Press and hold to enter  
Keyguard Mode.  
Emergency call  
Blinks when an emergency call is in  
progress.  
ETIQUETTE MODE: Press and hold to  
enter Etiquette (vibrate) Mode.  
1X  
Phone is in the “1x” service area.  
Phone is in the progress of “UP Browser”.  
Page 10 - Chapter 1  
Chapter 1 - Page 11  
8410altel 2003.12.12 12:25 AM Page 14  
DISPLAY INDICATORS  
USING THE BATTERY  
Voice Memo  
INSTALLING THE BATTERY  
New voice memo has been made.  
Answering machine  
1. Insert the bottom of battery into groove at bottom of  
the handset.  
Phone is in answering machine mode.  
Etiquette Mode  
2. Press in the top of the battery until it clicks.  
Phone will vibrate when call is received.  
Schedule  
Appears when either an event or an alarm  
is set.  
Ring Mode  
Appears when a ringer is set as a ringer  
mode.  
Ringer  
Ringer after  
vibrate  
Ring off  
Vibrate  
REMOVING THE BATTERY  
GPS Icon  
1. Push the tab with one hand and lift the top of the  
battery to separate.  
Indicates the Location Service of your  
phone is disabled.  
Indicates the Location Service of your  
phone is enabled.  
Dormant  
Indicates the phone is in disconnection  
condition while on “Server Connection”.  
Data Only  
Phone can receive an async call as a voice  
call.  
NOTE: If the battery is not correctly placed in the battery  
compartment, the handset will not turn on and/or  
the battery may detach during use.  
Fax Only  
Phone can receive a fax call as a voice call.  
Page 12 - Chapter 1  
Chapter 1 - Page 13  
8410altel 2003.12.12 12:25 AM Page 16  
CHARGING THE BATTERY  
CHARGING THE BATTERY  
NOTE: 1. It is more efficient to charge the battery with  
the handset powered off.  
POWER CONNECTION  
2. The battery must be connected to the phone  
in order to charge it.  
1. Plug the AC charger into a standard outlet.  
3. Battery operating time gradually decreases  
over time.  
4. If the battery fails to perform normally, you  
may need to replace the battery.  
2. Plug the other end of the AC charger into the  
bottom of your phone. The battery must be installed  
on to the phone.  
BATTERY CHARGING TIME  
BTR - 8410  
Battery Type  
Charging...  
Charging is  
Complete  
Charging Time  
200 minutes  
MENU  
MENU  
Charging is  
in progress  
Charging is  
in complete  
NOTE: Charging time applies only when your phone is  
turned off. Charging time may vary if your phone  
is turned on.  
NOTE: 1. When you charge the battery with the phone  
power off, you will see a charging status  
screen. You cannot operate the phone until  
it is powered on.  
BATTERY TALK & STANDBY TIMES  
Standard Battery  
(900mAh)  
2. The battery is not charged at the time  
of purchase.  
3. Fully charge the battery before use.  
4. If you use a data cable while you are  
charging the battery: After using the  
cable, disconnect the AC charger  
first, then the data cable.  
Digital  
Analog  
Digital  
Analog  
180  
103  
145  
16  
Talk Time  
(min)  
Standby  
Time  
(hrs)  
NOTE: These times are for a new battery.  
Talk and standby time may decrease over time.  
Page 14 - Chapter 1  
Chapter 1 - Page 15  
8410altel 2003.12.12 12:25 AM Page 18  
BATTERY INFORMATION  
Use only manufacturer approved batteries.  
Never use a damaged or worn out battery.  
Use the battery only for its intended purpose.  
Never expose the battery terminals to any other metal  
object. This can short circuit the battery.  
Chapter 2  
Avoid exposure to temperature extremes. A phone with  
a hot or cold battery may temporarily not work (or  
charge), even if the battery is fully charged. Always allow  
it to cool down or warm up first and keep the battery  
between 41oF and 95oF (5oC and 35oC).  
BASIC OPERATION  
When not in use, store the battery uncharged in a cool,  
dark, dry place.  
The battery is a self-contained unit. Do not attempt to  
open its case.  
This chapter addresses the phone’s basic functions  
including menus, volume levels, and call features.  
Battery operating time gradually decreases. You may  
need to buy a new battery.  
Using the Phone  
Using the Menu  
Menu Summary  
Basic Functions  
Functions During a Call  
Never dispose of a battery in a fire!  
Dispose of used batteries in accordance with local  
regulations.  
Recycle!  
Page 16 - Chapter 1  
Chapter 2 - Page 17  
8410altel 2003.12.12 12:25 AM Page 20  
USING THE PHONE  
USING THE MENU  
USING THE MENU  
TURNING THE PHONE ON  
1. To access the menu from the idle screen,  
press [MENU].  
1. Press and hold  
, until your “Power On” logo  
appears and the melody begins to play.  
When the key guard is activated, press 1, 2, 3 to unlock  
the key guard.  
To select a logo, refer to page 59 for more details.  
If “PASSWORD” appears, the phone is locked.  
To unlock, enter your 4-digit password.  
2. Use the Navigation Key to scroll through the menu.  
NOTE: The default password is the last 4 digits of your  
phone number.  
To search through the menu in numerical order, press  
down or to the right.  
3. To return to the previous page, press  
To exit the current menu and return to the idle screen,  
press  
[CLR].  
TURNING THE PHONE OFF  
.
1. Press and hold  
appears.  
, until “Power Off” animation  
4. To enter a function, press  
assigned number.  
or press the function’s  
NOTE: 1. Immediately change or recharge the battery  
when “Low Battery Warning Power Off”  
appears on the display. Memory may  
possibly be damaged if the phone turns off  
due to the battery completely draining.  
2. If the phone turns off due to the battery  
completely draining, memory may possibly be  
damaged.  
Hotkey  
From the idle screen, move the Navigation Key as follows  
to access these functions:  
• Upward movement : Phone Book  
• Downward movement : Messaging  
• Rightward movement : Axcess  
• Leftward movement : Mobile Web  
Page 18 - Chapter 2  
Chapter 2 - Page 19  
8410altel 2003.12.12 12:25 AM Page 22  
MENU SUMMARY  
MENU SUMMARY  
1 : Find  
1 : By Name  
2 : By Number  
3 : By Group  
u
AXCESS  
PHONE BOOK  
2 : Add New Entry  
3 : Edit Existing Entry  
4 : Edit Group  
MOBILE WEB  
SETTINGS  
1 : Add New Group  
2 : Change Group Name  
3 : Clear Group  
1 : Add New Group  
2 : Change Group Name  
3 : Edit Existing Group  
4 : Clear Group  
1 : Sounds  
1 : Ringer Type  
2 : Ringer Mode  
3 : Volume  
u
5 : Edit SMS Group  
4 : Alert  
5 : Roam Ringer  
6 : Tone Length  
7 : Etiquette Mode  
1 : Animation Setting  
2 : Main Display Setting  
3 : LCD Setting  
4 : Graphic Setting  
1 : Restrict  
6 : Speed Dial  
7 : My Profile  
2 : Display  
3 : Security  
1 : Dialed  
u
u
RECENT  
CALLS  
2 : Received  
3 : Missed  
4 : Call Timers  
1 : Last Call  
2 : All Calls  
3 : Home Calls  
4 : Roam Calls  
5 : Cumulative Calls  
2 : Special #’s  
3 : Clear Phone Book  
4 : Reset Phone  
5 : Change Password  
6 : 1X Password  
1 : Set Mode  
4 : System  
1 : Voice  
2 : Send New  
3 : Inbox  
4 : Outbox  
5 : Web Alerts  
6 : Saved  
7 : My Object  
8 : Erase All  
2 : Force Analog  
3 : Nam Setting  
4 : PRL ID  
MESSAGING  
5 : Location  
6 : Others  
1 : Answer Mode  
2 : Auto Retry  
3 : Auto Answer  
4 : Voice Privacy  
5 : Key Guard  
6 : Language  
7 : Web Idle Time  
8 : S/W Version  
9 : TTY Mode  
0 : Speaker Mode  
1 : Event  
1 : Inbox  
2 : Outbox  
3 : Saved  
4 : My Object  
1 : Save Sent Msg  
2 : Default CallBack  
3 : Alerts  
9 : Settings  
4 : Auto Erase  
5 : Entry Mode  
6 : Block or Unblock  
7 : Signature  
8 : Direct View  
u
1 : Schedule  
TOOLS  
2 : Alarm  
2 : Calculator  
3 : World Clock  
4 : Stopwatch  
Page 20 - Chapter 2  
Chapter 2 - Page 21  
8410altel 2003.12.12 12:25 AM Page 24  
MENU SUMMARY  
BASIC FUNCTIONS  
1 : Connection  
2 : WAP/AXCESS  
u
DATA SVC.  
MAKING A CALL  
1. Enter a phone number.  
1 : Voice Memo  
2 : Call Answer  
VOICE SVC.  
u
1 : On/Off  
To modify the phone number you have entered:  
2 : Inbox  
To erase one digit at a time, press  
To erase the entire number, press and hold  
.
3 : Call Speaker  
4 : Wait Time  
1 : Yes/No  
.
3 : Voice Command  
2 : Wake-Up  
3 : Top Level  
4 : Digit Dial  
1 : List  
2. Press  
.
The indicator  
, appears on the display.  
4 : Voice Dial  
If “CALL FAILED” appears on the display or the line is  
busy, press or  
If you activate the “AUTO RETRY” function, the phone will  
automatically retry for the number of times you have  
selected. (refer to page 66)  
If the number you’re calling is stored in the phone book,  
the name and number will appear while the call is being  
placed.  
2 : Add  
.
3 : Clear All  
1 : Untrain All  
2 : Prompt Mode  
3 : Digit Mode  
4 : HFK Mode  
5 : Voice Setting  
3. To end a call, press  
. “Press  
[OK] to save  
this number” will appear.  
(Refer to page 32 for more details about storing a  
phone number.)  
NOTE: Please refer to page 75 (Voice Service) for more  
details on using Voice Activated Dialing to place  
a call.  
Page 22 - Chapter 2  
Chapter 2 - Page 23  
8410altel 2003.12.12 12:25 AM Page 26  
BASIC FUNCTIONS  
BASIC FUNCTIONS  
PAUSE FEATURE  
ANSWERING A CALL  
You can dial or save a phone number with pauses for  
use in automated systems where you need to enter a  
credit card number, or a PIN number. This feature will be  
convenient when you are linked to an ARS (Advanced  
Record System).  
1. To answer a call, press any key except Clear, End or  
the Navigation Key.  
In the Settings menu, you can select either “Any Key” or  
“Send Key” to answer a call. lf “Send Key” is selected,  
the phone can only be answered by pressing  
See page 66 for more information.  
.
1. To insert a pause, enter the phone number then press  
[PSE]. Select either a Hard Pause (“P” appears)  
or a Timed Pause (“T” appears).  
2. To end the call, press  
.
NOTE: In Auto Answer Mode, a call is automatically  
answered after a preset number of ring tones.  
See page 67 for more details.  
2. Press  
to dial or  
[STO] to store.  
Please refer to page 32 for more details about  
storing a phone number.  
CALLER ID FUNCTION  
Hard Pause : When connecting to the ARS, it enables  
to go to the next number, by either pressing  
Time Pause : When connecting to the ARS, it allows to  
go to the next number after 3 seconds.  
or  
.
Identifies a caller by displaying that person’s phone  
number. If the caller’s name and number are stored  
in your phone book, the name and number will be  
displayed.  
SPEAKER PHONE  
NOTE: The caller ID is stored in the call history.  
Caller ID is a system dependent feature.  
1. To activate the speaker phone when the phone is in  
the idle mode, in answering mode, and in calling  
mode, press and hold located on the side of the  
phone.  
Please contact your service provider for details.  
2. The phone returns to normal (Speaker phone off)  
after ending or call or when the phone is turned off  
and back on.  
Page 24 - Chapter 2  
Chapter 2 - Page 25  
8410altel 2003.12.12 12:25 AM Page 28  
BASIC FUNCTIONS  
BASIC FUNCTIONS  
CALL WAITING FUNCTION  
ADJUSTING VOLUME  
Notifies you of another incoming call when you are on the  
phone by sounding a beep and displaying the caller’s  
phone number on the screen.  
Adjusts the volume in two ways: by using the volume  
control keys on the side of the handset, or by using the  
menu.  
1. To answer another call while on the phone,  
1. Press  
[MENU]  
and select one of the  
press  
. This places the first call on hold.  
following. To increase the volume press the  
Navigation Key upwards or to the right. To lower the  
volume, press it downwards or to the left.  
2. To switch back to the first caller, press  
again.  
Ringer : Controls the ringer volume.  
Call Waiting is a system dependent feature. Please contact  
your service provider for details.  
Key : Controls the keypad tone volume.  
Voice Call : Controls the speaker & earpiece volume.  
Speaker phone : Controls the speaker & earpiece volume  
in speaker phone mode.  
VOICE MEMO DISPLAY  
NOTE: Move the Navigation Key upward or downward  
to adjust volume of earpiece during a call.  
Displays the number of voice memos recorded in the  
answering machine.  
2. Adjust volume and press  
[OK] to save it.  
1. To play the recorded voice memos, press  
[PLAY].  
KEY GUARD  
1. Press  
[MENU]  
.
ETIQUETTE MODE  
Mutes key tones and activates the vibration mode to  
alert you of an incoming call or message.  
2. Select “On” or “Off”.  
On : Prevents accidentally pressing the keypad.  
Off : Key guard off.  
1. To turn etiquette mode on/off, press and hold  
.
3. To save, press  
[OK].  
NOTE: To unlock the key guard, press  
.
Page 26 - Chapter 2  
Chapter 2 - Page 27  
8410altel 2003.12.12 12:25 AM Page 30  
FUNCTIONS DURING A CALL  
FUNCTIONS DURING A CALL  
To display menu options during a call, press  
These menu items are available while you are on a call.  
.
SEND MY PHONE #  
Automatically transmits your phone number to a pager.  
(Dependent on pager service.)  
MESSAGING  
Enables you to send a message (SMS) during a call.  
1. To transmit your phone number during a call,  
press  
[MENU]  
.
1. Press  
[MENU]  
.
MY PROFILE  
MUTE (UNMUTE)  
Enables you to review and edit your profile entered  
through the phone book entry.  
Please see page 45 for more details.  
Mutes the microphone while you are on a call so the  
other party cannot hear you if you speak.  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
To deactivate, press  
[MENU]  
.
The phone will automatically un-mute in Emergency Call  
or Callback mode.  
VOICE PRIVACY  
Enhances voice privacy during a call.  
1. Press [MENU]  
SCRATCHPAD  
.
Stores a new phone number during a call without the  
calling party hearing the keypad tones.  
LOCATION  
1. Press  
[MENU]  
.
Enables the network to locate your current location  
through Global Positioning System (GPS).  
2. Enter a phone number, press  
then save the  
phone number in the phone book.  
1. Press  
[MENU]  
.
To deactivate it, press  
[MENU]  
.
Page 28 - Chapter 2  
Chapter 2 - Page 29  
8410altel 2003.12.12 12:25 AM Page 32  
FUNCTIONS DURING A CALL  
SPEAKER PHONE MODE  
Activates the speaker phone when you are on a call.  
The phone returns to normal (speaker phone off) after  
ending or call or when the phone is turned off and back  
on.  
Chapter 3  
1. Press  
[MENU]  
.
MEMORY  
FUNCTION  
This chapter addresses numerous functions including  
saving phone numbers to the internal phone book,  
entering text and accessing call logs.  
Storing Phone Numbers  
Text Input Methods  
Speed Dialing  
Phone Book  
Recent Calls  
Page 30 - Chapter 2  
Chapter 3 - Page 31  
8410altel 2003.12.12 12:25 AM Page 34  
STORING PHONE NUMBERS  
TEXT INPUT METHODS  
The phone book stores up to 200 entries, with up to 5  
numbers each.  
ENTERING CHARACTERS  
For convenient entry of memory location names and text  
messages, your phone offers several text input methods:  
1. Enter phone # and press  
[STO].  
2. Choose “Add New Entry” or “Add Existing Entry”.  
Alpha mode : Enters words by repeatedly tapping the  
corresponding key until the desired character is  
displayed.  
T9 mode : Tap each corresponding key only once and the phone  
predicts the word you are entering.  
Numeric mode : Only enters numbers.  
Press [OK] to select.  
TM  
3. The Phone # will appear next to a list of icons.  
The name of the icon is displayed above the list.  
Use the Navigation Key to choose the type of #  
you’re adding, as indicated by the icon.  
Symbol mode : Enters symbols like @, #, %.  
ALPHA MODE [ABC]  
Press  
[OK] to select.  
Use the digit keys to enter letters, numbers and characters.  
Enter letters using the keypad as follows:  
4. When the Editor is displayed, enter a name.  
Follow instructions for entering text on page 33.  
1 Repetition 2 Repetitions 3 Repetitions  
4 Repetitions  
5 Repetitions  
Key Pad  
1
To change the input mode, press  
Press [OK] to store the name.  
.
1
A
D
G
J
.
@
C
F
I
-
2ABC  
3DEF  
4GHI  
B
E
H
K
N
Q
U
X
2
3
4
5
6
S
8
Z
...  
...  
...  
...  
...  
7
5. Use the Navigation Key to scroll through more  
options for the entry (VAD, secret, etc.).  
5JKL  
L
Group – Family, Friends, Work, Etc.  
Voice dial – Home, Mobile, Office, Unassigned.  
Set Secret – Yes, No.  
6MNO  
7PQRS  
8TUV  
9WXYZ  
M
P
T
O
R
V
Y
...  
9
W
The other fields are set to Numeric mode as a default.  
To change the input mode, press  
[MODE].  
NOTE: An alternative way to save a phone number to  
the phone book is listed on page 40 “Add New  
Entry”.  
To enter a space, press  
. After two seconds, the  
cursor will automatically move to the next column.  
Repeat until letters are entered.  
There is a 16-letter limit.  
6. To store the entry, press  
will be displayed.  
“New entry is saved”  
To delete one digit, press  
. To delete the entire entry,  
press and hold  
.
To change from lowercase to uppercase, press  
located on the side of the phone.  
Chapter 3 - Page 33  
Page 32 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 36  
TEXT INPUT METHODS  
TEXT INPUT METHODS  
TM  
TM  
1. Press each key once for each letter of the word you  
are writing.  
T9 PREDICTIVE TEXT MODE [T9 ABC]  
To choose T9TM mode from the Editor screen press  
then choose [T9TMABC]. This mode predicts the words  
you are entering using a built-in dictionary. With T9TM  
predictive text input, you press each key only once for  
each letter. The chart below outlines how to use T9TM  
text input.  
,
To write John with the English dictionary selected:  
1. Press 5 once - (for - k)  
2. Press 6 once - (for - km)  
3. Press 4 once - (for - log)  
KEY  
Case  
Next  
FUNCTION  
Press to change mode.  
[T9Abc][Abc][123][Symbol mode].  
4. Press 6 once - (for - john)  
NOTE: The display shows for each key pressed.  
Press to view the next matching  
word if the highlighted word is not  
the word you intended.  
2. Press  
until the correct word is displayed.  
3. To select the correct word, press  
.
Press to accept a word and add a  
space.  
Space  
Shift  
Press to select a letter case of the  
standard text input or T9 text  
input mode. [Abc], [ABC], and  
[abc] indicate the standard text  
input. [T9Abc], [T9ABC], and  
[T9abc] indicate the predictive text  
input.  
Press to delete a character to the  
left of the cursor.  
Clear  
Store the letters and numbers you  
enter.  
Sto  
Page 34 - Chapter 3  
Chapter 3 - Page 35  
8410altel 2003.12.12 12:25 AM Page 38  
TEXT INPUT METHODS  
SPEED DIALING  
To store a number in speed dial:  
NUMERIC MODE [123]  
SPEED DIAL  
Links a phone number from the phone book to a location  
number and enables you to call that number simply by  
pressing its location number from the idle mode.  
Numeric mode allows you to add a number to your  
entry/message. To select numeric mode from the Editor  
screen press  
, then select [123].  
SYMBOL MODE [SYM]  
1. Press  
2. To assign a phone number to a location, select the  
location then press  
If a phone number is already assigned to the location,  
press [DEL] and the navigation key to delete.  
[MENU]  
.
Symbol mode allows you to add various symbols to  
your entry. Whether you are adding an e-mail address  
to your phone book or sending an expressive message,  
symbols make these entries easier.  
.
To select symbol mode from the Editor screen press  
then choose [SYM].  
The symbols will appear on the display.  
The corresponding key number for that symbol will  
appear as well. You can press the key to select the  
symbol .  
3. Select the group where the phone number is saved  
then press  
.
4. Select the entry then press  
number and press again.  
, select the phone  
To move to the next screen of symbols press  
.
ONE-TOUCH/TWO-TOUCH DIALING  
Ideal for frequently dialed numbers, this feature allows  
phone book entries to be dialed via the keypad with only  
one or two key presses.  
ONE-TOUCH DIALING:  
1-9 : Press the corresponding memory number and hold  
for more than 1 second.  
TWO-TOUCH DIALING:  
10-20 : Press the first digit and second digits of the  
memory number short and long respectively.  
If no phone number is stored in the location entered,  
“There is no number” will appear on the screen.  
If a phone number is stored in secret, you must enter  
the password to make a call.  
Page 36 - Chapter 3  
Chapter 3 - Page 37  
8410altel 2003.12.12 12:25 AM Page 40  
PHONE BOOK  
PHONE BOOK  
Stores up to 300 entries, each of which can be assigned  
to a group like Personal, Business, etc. Entries can be  
retrieved by name, phone number or group.  
BY NUMBER  
1. Press  
[MENU]  
.
FIND  
2. To search through the menu, enter a part of the  
phone number then press  
.
Retrieves an entry by group, name, or number.  
If there is no match, “Cannot Find Name” will appear.  
1. Press  
[FIND].  
3. All matching entries will be displayed. Select an  
2. All entries will appear in alphabetical order.  
“Search Name:” will appear at the top of the list.  
entry and either delete it by pressing  
or view it by pressing  
[DEL]  
.
If the entry is set to secret, you will be asked for your  
password.  
3. Type in a name or character string then press  
4. All entries will be displayed.  
BY NAME  
.
4. To call the selected number, press  
.
BY GROUP  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
2. Enter a name or its character string and press  
to display the names in alphabetical order. Please  
refer to page 33 about using the Alpha Editor.  
2. Select one of the following groups (Personal,  
Business, Etc., All) with  
.
If there is no match, “Cannot Find Name” will appear.  
3. All group entries will be displayed. Select an entry  
and either delete it by pressing [DEL]  
or view it by  
3. All matching entries will be displayed. Select an  
entry and either delete it by pressing  
or view it by pressing  
[DEL]  
.
.
If the entry is set to secret, you will be asked for your  
If the entry is set to secret, you will be asked for your  
password.  
password.  
4. To call the selected number, press  
.
4. To call the selected number, press  
.
The default password is the last four digits of your phone  
number.  
The default password is the last four digits of your phone  
number.  
Chapter 3 - Page 39  
Page 38 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 42  
PHONE BOOK  
PHONE BOOK  
ADD NEW ENTRY  
EDIT GROUP  
1. To add a new entry to the phone book,  
This feature allows you to assign phone numbers into  
group categories. The phone already includes 4 groups  
Personal, Business, Etc., All – and you can add up to 3  
more.  
press  
2. Enter a name, then press  
3. Press the Navigation Key until the phone number  
[MENU]  
.
.
ADD NEW GROUP  
type is selected, then press  
[EDIT].  
1. To add a new group, press  
[MENU]  
.
4. Enter the phone number. Press  
.
A maximum of seven groups is allowed.  
5. To save the entry, press  
[STO].  
2. Input a new group name.  
To return to the previous page, press  
[CLR].  
3. To save it, press  
[STO].  
EDIT EXISTING ENTRY  
CHANGE GROUP NAME  
1. To edit a existing entry,  
press  
[MENU]  
.
1. To change a new group,  
press  
[MENU]  
.
2. Use the Navigation Key to select a group where the  
number is stored.  
2. Select an existing group name with the Navigation  
Key.  
Personal, Business, Etc., All  
3. Select an entry and press  
to view and edit the  
3. Input a new name.  
entry, or  
[DEL] to delete it.  
4. To save it, press  
[STO].  
The groups Personal, Business, Etc., and All cannot be  
changed.  
Chapter 3 - Page 41  
Page 40 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 44  
PHONE BOOK  
PHONE BOOK  
CLEAR GROUP  
CHANGE GROUP NAME  
1. To delete an existing group,  
1. To change a group name,  
press [MENU]  
press  
[MENU]  
.
.
2. Select the group to be deleted then press  
“Clear [Group name]?” will be displayed.  
.
2. Select an existing group name then press  
3. Input a new name.  
.
3. To delete it, press  
[OK].  
4. To save it, press  
[OK].  
The groups Personal, Business, Etc., and All cannot be  
changed.  
EDIT EXISTING GROUP  
EDIT SMS GROUP  
1. To edit an existing group,  
press  
[MENU]  
.
Allows the user to group up to 10 phone numbers.  
The user can add, change, and delete Msg.Group.  
2. The 3 existing groups appear - Family, Friend, Work.  
3. Use the Navigation Key to select an existing group.  
ADD NEW GROUP  
1. To add a new group, press  
[MENU]  
.
4. To save it, press  
5. Highlight and edit the entry.  
6. Press [OK] again to confirm it.  
[OK].  
A maximum of seven groups is allowed.  
2. Input a new group name.  
3. To save it, press  
[STO].  
Chapter 3 - Page 43  
Page 42 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 46  
PHONE BOOK  
PHONE BOOK  
CLEAR GROUP  
MY PROFILE  
Saves your personal information.  
1. To clear a group name,  
1. To review and edit your personal information,  
press  
2. Select a group name then press  
3. “Clear [Group Name]?” will be displayed.  
[MENU]  
.
press  
[MENU]  
.
.
2. To edit a selected item, press  
[EDIT].  
NOTE: To edit Blood type, press  
.
3. To confirm and save it, press  
[STO].  
4. To delete the group, press  
[OK].  
SPEED DIAL  
Links a phone number from the phone book to a location  
number and enables you to call that number simply by  
pressing its location number from the idle mode.  
1. Press  
[MENU]  
.
2. To assign a phone number to a location, select the  
location then press  
.
If a phone number is already assigned to the location,  
press [DEL] and the Navigation Key to delete.  
3. Select the group where the phone number is saved  
then press  
.
4. Select the entry then press  
, select the phone  
number and press  
again.  
Chapter 3 - Page 45  
Page 44 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 48  
RECENT CALLS  
RECENT CALLS  
The CDM-8410 keeps a log of the 10 most recently  
missed, received (incoming) and dialed (outgoing) calls.  
Log information includes the phone number, the date  
and time of the call.  
RECEIVED  
Displays information about the 20 most recently  
answered calls. You can dial a selected number by  
simply pressing  
.
This feature is not intended for billing purposes.  
To access Recent Calls from the idle mode,  
1. To see a list of the 20 most recently answered calls,  
press [MENU] . If the number is already  
press  
[MENU]  
.
stored in your phone book, only the name appears.  
If the number is not stored, only the phone number  
appears.  
DIALED  
Displays information about the ten most recently dialed  
numbers. You can dial a selected number by simply  
2. To view incoming call details, press the  
.
pressing  
.
NOTE: Call details include date, time and phone number.  
1. To see a list of the 20 most recently dialed numbers,  
press [MENU] . If the number is already  
3. From the call details screen to save the number press  
[OPTS]; to delete it press  
[DEL].  
stored in your phone book, only the name appears.  
If the number is not stored, only the phone number  
“Phone # is already saved in phone book” or “Move to  
phone book save mode?” will appear.  
appears or from idle mode press  
.
NOTE: After the 20th incoming call, the oldest call will  
automatically be erased from the history.  
2. To view outgoing call details, press  
.
NOTE: Call details include date, time and phone number.  
3. From the call details screen press  
[OPTS] to save  
the number or press  
[DEL] to delete it.  
Shortcut : From idle mode, press  
to access the  
recently dialed call numbers.  
“Phone # is already saved in phone book” or “Move to  
phone book save mode?” will appear.  
NOTE: After the 20th outgoing call, the oldest call will  
automatically be erased from the history.  
Page 46 - Chapter 3  
Chapter 3 - Page 47  
8410altel 2003.12.12 12:25 AM Page 50  
RECENT CALLS  
RECENT CALLS  
MISSED  
CALL TIMERS  
Displays information about the 20 most recently missed  
Checks the talk time and manages your calls within the  
limit you set. The five timers include:  
calls. Call a missed call number by pressing  
.
1. To see a list of the 20 most recently missed calls,  
press [MENU] . If the number is already  
LAST CALL  
To display the total amount of time of your last call:  
stored in your phone book, only the name appears.  
If the number is not stored, only the phone number  
appears.  
1. Press  
[MENU]  
.
2. To return to the previous page, press  
[CLR].  
2. To view missed call details, press  
.
NOTE: Call details include date, time and phone number.  
ALL CALLS  
To display the total amount of time of all your calls:  
3. From the call details screen press  
[OPTS] to save  
the number or press [DEL] to delete it.  
1. Press [MENU] and the message  
“Phone # is already saved in phone book” or “Move to  
“Not Intended for Billing Purposes” appears for  
5 seconds.  
phone book save mode?” will appear.  
NOTE: After the 20th missed call, the oldest call will  
automatically be erased from the history.  
2. Use the Navigation Key to view the time of the  
following items:  
Voice, Data/Fax  
3. To return to the previous page, press  
[CLR].  
Page 48 - Chapter 3  
Chapter 3 - Page 49  
8410altel 2003.12.12 12:25 AM Page 52  
RECENT CALLS  
RECENT CALLS  
HOME CALLS  
CUMULATIVE CALLS  
To display the total amount of time for calls placed  
within your home area:  
Displays talk time of all incoming and outgoing calls,  
excluding web access calls.  
1. Press  
[MENU]  
and the message “Not  
1. Press  
[MENU]  
and the message “Not  
Intended for Billing Purposes” appears for 5 seconds.  
Intended for Billing Purposes” appears for 5 seconds.  
2. Use the Navigation Key to view the time of the  
following items:  
2. Use the Navigation Key to view the time of the  
following items:  
Voice, Data/Fax  
Voice, Data/Fax  
3. To reset the timer, press  
[RST].  
3. To reset the timer, press  
[RST].  
To return to the previous page, press  
[CLR].  
To return to the previous page, press  
[CLR].  
ROAM CALLS  
To display the total amount of time for calls placed  
outside your home area:  
1. Press  
[MENU]  
and the message “Not  
Intended for Billing Purposes” appears for 5 seconds.  
2. Use the Navigation Key to view the time of the  
following items:  
Voice, Data/Fax  
3. To reset the timer, press  
[RST].  
To return to the previous page, press  
[CLR].  
Chapter 3 - Page 51  
Page 50 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 54  
MEMO  
Chapter 4  
SETTINGS  
This chapter addresses customizing your phone by  
adjusting backlighting, volume, ring tones and other  
user-friendly features.  
Settings  
VS Menu  
VR Mode  
Chapter 4 - Page 53  
Page 52 - Chapter 3  
8410altel 2003.12.12 12:25 AM Page 56  
SETTINGS  
SETTINGS  
EMS DOWNLOADS  
SOUNDS  
EMS Ringer stores Ringer Lists downloaded through  
EMS in SMS.  
This feature allows you to select sounds for Ringer  
Type, Ringer Mode, Volume, Alert, Roam Ringer, Tone  
Length and Etiquette Mode.  
1. Press  
[MENU]  
.
2. Select a downloaded ringer type from “SMS” to  
RINGER TYPE  
“EMS” with the Navigation Key, then press  
to save it.  
[OK]  
Selects a ringer type to alert you of an incoming call.  
RINGER MODE  
RINGER LIST  
1. Press  
[MENU]  
.
This feature allows you to choose how you want to be  
alerted to an incoming call.  
2. Select a ringer type from the 9 melodies and  
11 ringer types with the Navigation Key, then  
1. Press  
[MENU]  
.
press  
[OK] to save it.  
2. Select one of the following options:  
Ringer : Phone plays ringer selected in Ringer List.  
Vibrate : Phone vibrates only.  
Ringer after Vibrate : The ringer sounds after vibration.  
Silent : Mutes the ringer.  
MY DOWNLOADS  
My Downloads stores Ringer Lists downloaded through  
“AXCESS”.  
1. Press  
[MENU]  
.
2. Select a downloaded ringer type from “AXCESS”  
3. To confirm, press  
[OK].  
with the Navigation Key, then press  
to save it.  
[OK]  
VOLUME  
Controls the Ringer, Key and Voice Call volume.  
ANIMATED RINGER  
Animated Ringer stores Animated Ringer Lists  
downloaded through “AXCESS”.  
RINGER  
To adjust the ringer volume:  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
2. Select a downloaded animated ringer type from  
“AXCESS” with the Navigation Key, then  
2. Adjust the ringer volume using the Navigation Key  
or the volume keys on the side of the phone.  
press  
[OK] to save it.  
3. To save, press  
[OK].  
Page 54 - Chapter 4  
Chapter 4 - Page 55  
8410altel 2003.12.12 12:25 AM Page 58  
SETTINGS  
SETTINGS  
KEY  
ROAM ALERT  
Sounds an alert when leaving a service area and  
entering a roaming service area:  
To adjust the keypad tone:  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
2. Adjust the keypad tone using the Navigation Key  
or the volume keys on the side of the phone.  
2. Select “Off” or “On” then press  
[OK] to save it.  
3. To save, press  
[OK].  
CONNECT ALERT  
To sound an alert to notify you that a call has been  
successfully placed:  
VOICE CALL  
To adjust the earpiece volume:  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
2. Select “Off” or “On” then press  
[OK] to save it.  
2. Adjust the earpiece volume with the Navigation Key  
or the volume keys on the side of the phone.  
FADE ALERT  
The alert sounds in standby mode or during a call:  
3. To save, press  
[OK].  
1. Press  
[MENU]  
.
SPEAKER PHONE  
2. Select “Off” or “On” then press  
[OK] to save it.  
To adjust speaker volume:  
1. Press  
[MENU]  
.
NOTE: The alert sounds in standby mode or during a call.  
2. Adjust the speaker volume with the Navigation Key  
or the volume keys on the side of the phone.  
LOW SIGNAL ALERT  
The alert sounds in standby mode or during a call:  
3. To save, press  
[OK].  
1. Press  
[MENU]  
.
ALERT  
2. Select “Off” or “On” then press  
[OK] to save it.  
This feature allows you to select alerts to sound when  
the phone performs certain functions. Alerts include:  
NOTE: The alert sounds in standby mode or during a call.  
MINUTE ALERT  
To set an alert to sound every minute of a phone call:  
1. Press  
[MENU]  
.
2. Select “Off” or “On” then press  
[OK] to save it.  
Page 56 - Chapter 4  
Chapter 4 - Page 57  
8410altel 2003.12.12 12:25 AM Page 60  
SETTINGS  
SETTINGS  
ROAM RINGER  
DISPLAY  
Sounds a different ringer from the one set in Ringer  
Type when you enter a roaming service area.  
This feature allows you to customize and personalize  
your phone display.  
1. Press  
[MENU]  
.
ANIMATION SETTING  
Selects your favorite LCD display in the following  
modes:  
2. Select “Distinctive” or “Normal” then press  
to save it.  
[OK]  
Distinctive : Sounds a different ringer type.  
Normal : Sounds the same ringer type as used in  
Home area.  
IDLE DISPLAY  
1. Press  
[MENU]  
.
2. Select a display from the Animation list.  
TONE LENGTH  
To adjust tone length:  
3. To save it, press  
[OK].  
1. Press  
[MENU]  
.
POWER ON DISPLAY  
1. Press  
2. Select a display from the Animation list.  
3. To save it, press [OK].  
[MENU]  
.
2. Select “Normal” or “Long” then press  
to save it.  
[OK]  
ETIQUETTE MODE  
1. Press  
[MENU]  
.
POWER OFF DISPLAY  
1. Press [MENU]  
.
2. Select “On” or “Off”.  
2. Select a display from the Animation list.  
3. To save it, press [OK].  
On : Etiquette Mode on.  
Off : Etiquette Mode off.  
3. To save, press  
[OK].  
Shortcut : To activate/deactivate etiquette mode,  
press and hold  
.
Page 58 - Chapter 4  
Chapter 4 - Page 59  
8410altel 2003.12.12 12:25 AM Page 62  
SETTINGS  
SETTINGS  
MAIN DISPLAY SETTING  
LCD SETTING  
Selects your favorite LCD display for the following  
modes:  
Controls backlight and LCD contrast for a better view  
and more efficient use.  
GREETING INPUT  
BACKLIGHTING  
To input a personal greeting:  
Backlights the display and keypad for easy viewing  
1. Press  
[MENU]  
.
in dark places.  
1. Press  
[MENU]  
.
2. To edit the banner, press  
.
2. Select one of the following options:  
5 secs, 10 secs, 20 secs, Off.  
3. Input your personal banner, using the Alpha  
Editor. (Refer to page 33).  
To save, press  
[OK].  
Off : Turn the backlight off.  
5 secs, 10 secs, 20 secs : Backlight on for 5, 10, or 20  
4. To save, press  
[STO].  
seconds respectively after a  
touch of the keypad.  
IDLE CLOCK  
To display a clock on the LCD:  
1. Press [MENU]  
.
CONTRAST  
The LCD display contrast can be adjusted to 7 levels.  
2. Select one of the following options then  
press [OK] to save it.  
1. Press  
2. Adjust the LCD contrast for better view.  
3. To save, press [OK].  
[MENU]  
.
Digital Clock  
Analog Clock  
Greeting Clock  
Animation + Clock  
Chapter 4 - Page 61  
Page 60 - Chapter 4  
8410altel 2003.12.12 12:25 AM Page 64  
SETTINGS  
SETTINGS  
GRAPHIC SETTING  
SYSTEM  
Scans the channels so your phone can stay connected  
to any available system.  
SCREEN SAVER  
1. Press  
[MENU]  
.
SET MODE  
TIME SETTINGSET (Determines when the screen saver  
activates.)  
Select one of the following options : Off / 5 Secs / 10 Secs  
/ 20 Secs / 30 Secs.  
Selects the Preferred System.  
1. Press  
[MENU]  
.
SCREEN SAVER  
Select parameters (DOWNLOAD IMAGE/EMS IMAGE)  
by using the navigation key, then press  
.
2. Select one of the following options  
(Automatic B/Automatic A/Home Only) then  
press  
.
WALLPAPER  
1. Press [MENU]  
.
Automatic B : Scan the radio channels based on the  
Automatic B setting.  
Automatic A : Scan the radio channels based on the  
2. Select parameters (Download Image/EMS Image),  
Automatic A setting.  
Home Only : Scan radio channels only within your home  
area or home affiliated area.  
then press  
.
FORCE ANALOG  
Temporarily forces phone to use Analog mode – mode  
automatically ends in 10 minutes.  
1. Press  
[MENU]  
.
2. Select “No” or “Yes” then press  
activate it.  
[OK] to  
Force Analog : This is a mode when the user is in an  
area where it is hard to get a connec-  
tion but is in an urgent situation to  
make the call. It forces to enable to  
make a call.  
Page 62 - Chapter 4  
Chapter 4 - Page 63  
8410altel 2003.12.12 12:25 AM Page 66  
SETTINGS  
SETTINGS  
NAM SETTING  
Enables network system to locate your position and  
allows the use of some wireless applications.  
Enables Auto NAM (Number Assignment Modules) or  
manually selects a NAM.  
LOCATION  
AUTO NAM  
To determine whether or not the network system can  
detect your position:  
Automatically switches phone to proper NAM when you  
have multiple NAM registrations.  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
2. Select “Yes” or “No” then press  
[OK] to save it.  
2. Select “911 Only” or “Location On”.  
911 Only : Your location will be hidden from network &  
application except 911.  
Location On : Your location is now available to the  
CHANGE NAM  
Changes the NAM used by the phone when you have  
multiple registrations.  
network.  
1. Press  
[MENU]  
.
3. To save, press  
[OK].  
2. Select “NAM1” or “NAM2” then press  
to save it.  
[OK]  
PRL ID  
Displays the phone’s PRL (Preferred Roaming List).  
1. Press [MENU]  
.
Page 64 - Chapter 4  
Chapter 4 - Page 65  
8410altel 2003.12.12 12:25 AM Page 68  
SETTINGS  
SETTINGS  
AUTO ANSWER  
OTHERS  
Automatically answers a call after a preset number of  
rings.  
ANSWER MODE  
To select an answer mode:  
1. Press  
[MENU]  
.
1. Press  
[MENU]  
.
2. Select on of the following:  
2. Select “Any Key” or “Send Key”.  
Off/5/10/18 seconds.  
NOTE: This function will not be active when you select  
Vibrate, Silent, Etiquette or Ringer after Vib as a  
ringer mode.  
Any Key : Press any key to answer an incoming call  
except  
,
, and  
.
Send Key : Press only  
to answer a call.  
3. To save, press  
[OK].  
3. To save, press  
[OK].  
VOICE PRIVACY  
AUTO RETRY  
Enhances voice privacy and avoids tapping during a  
call.  
Automatically retries a call up to 5 times after a set  
time interval.  
1. Press  
[MENU]  
.
RETRY TIME  
1. Press  
[MENU]  
.
2. Select “Standard” or “Enhanced”.  
2. Select a time interval option (Off, 3, 5, 7,10 seconds).  
To save, press [OK].  
“Enhanced” : Makes it more difficult to wire tap.  
3. To save, press  
[OK].  
REPEAT  
1. Press  
[MENU]  
.
2. Select one of the options (1 time, 3 times, 5 times).  
To save, press  
[OK].  
Page 66 - Chapter 4  
Chapter 4 - Page 67  
8410altel 2003.12.12 12:25 AM Page 70  
SETTINGS  
SETTINGS  
KEY GUARD  
S/W VERSION  
To display the version of your phone:  
1. Press  
[MENU]  
.
2. Select “On” or “Off”.  
1. Press  
[MENU]  
.
On : Prevents accidentally pressing the keypad.  
Off : Key guard off.  
2. The software and hardware versions appear.  
3. To save, press  
[OK].  
3. Press  
[OK].  
NOTE: To unlock the key guard, press  
.
TTY MODE  
LANGUAGE  
To select the language in which letters are displayed on  
screen.  
Your phone is able to operate with a “TTY” (Teletypewriter)  
device in both analog and digital modes. This feature is  
system dependent and may not be available in all areas.  
1. Press  
[MENU]  
.
A TTY (also known as TDD or Text Telephone) is a  
telecommunications device that allows people who are  
deaf or hard of hearing, or who have speech or language  
disabilities, to communicate by telephone. Connect the  
TTY device to the Headset Jack of PCS Phone. Then type  
the message you want to send on the TTY’s keyboard.  
2. Select either “English” or “Spanish”.  
3. To save, press  
[OK].  
WEB IDLE TIME  
When connected to a network, this feature automatically  
disconnects your phone from the network when there  
is no key input for a period of time that you set. To set  
the web idle time:  
TO CONNECT TO A TTY DEVICE  
1. Turn the “TTY” device off.  
2. Connect the “TTY” device to the phone at the  
earphone-microphone jack.  
1. Press  
[MENU]  
.
TO ACTIVATE/DEACTIVATE TTY MODE  
2. Use the scroll key to set the web idle timer or press  
digit keys one by one to enter the time.  
1. Press  
[MENU]  
.
Timer length cannot exceed 3 digits.  
2. Select one of the following options (TTY Full/  
TTY+TALK/TTY+HEAR/TTY Off) then press  
3. To save, press  
[OK].  
.
Page 68 - Chapter 4  
Chapter 4 - Page 69  
8410altel 2003.12.12 12:25 AM Page 72  
SETTINGS  
VS MENU  
MAKING AND ANSWERING A CALL IN TTY MODE  
You can make or answer calls in the same manner as  
ordinary calls.  
VOICE MEMO  
RECORD VOICE MEMO  
1. To start VS menu, press  
[MENU]  
.
SPEAKER MODE  
2. To access the voice memo menu, press  
.
1. Press  
[MENU]  
.
3. When you press to record a voice memo,  
instructions will appear and you will hear “Please  
record it at the tone”.  
2. Select “On” or “Off”.  
On : Speaker phone on.  
Off : Speaker phone off.  
4. To stop recording a memo, press  
.
To pause press  
. To resume, press  
.
3. To save, press  
[OK].  
5. After recording a voice memo you can “Review”,  
“Re-record” or “Save”.  
PLAY VOICE MEMO  
1. To start VS menu, press  
[MENU]  
.
.
2. To enter the voice memo menu, press  
.
3. To play the voice memo menu, press  
Select the desired voice memo option then press  
.
NOTE: Edit Key - Edit the voice memo title.  
CLR Key - Deletes the selected voice memo.  
CLEAR ALL  
1. To start VS menu, press  
2. To enter the voice memo menu, press  
3. To delete a voice memo, press  
[MENU]  
.
.
.
Page 70 - Chapter 4  
Chapter 4 - Page 71  
8410altel 2003.12.12 12:25 AM Page 74  
VS MENU  
VS MENU  
CALL ANSWER  
VOICE COMMAND  
Sets and operates the answering machine.  
With Voice Command you can train the Voice Recorder  
to make calls by simply saying the control words out-  
lined below.  
1. Press  
[MENU]  
.
2. Select one of the following options, then press  
.
YES/NO  
ON/OFF : Turns the Call Answer Mode on/off.  
INBOX : Plays or erases a recorded memo.  
CALL SPEAKER ON : You can(not) hear the caller’s  
1. Press  
[MENU]  
.
voice as it’s recorded by answering  
machine.  
2. Select one of the following options, then press  
.
WAIT TIME : No ringer, 5s, 10s, 18s. Answering machine  
will answer the call after a specific time.  
LIST WORDS : Displays the list of control words in the  
Yes/No set. Select a control word from the  
list then press . Either train, untrain  
or view its status. To train a word, press  
TRAIN ALL : Train Yes/No set to recognize your voice.  
UNTRAIN ALL : Untrain Yes/No set to recognize trained  
control words.  
RECORDING LIMITATION :  
.
You have a limit of 10 voice memos including those in  
Answering Machine. Each voice memo has the time limit of  
60 seconds.  
WAKE-UP  
Use Wake-Up to train or untrain the VR with the control  
word, Wake-Up.  
1. Press  
[MENU]  
.
2. Select one of the following options, then press  
.
LIST WORDS : Displays the list of control words in the  
Wake-Up set. Select a control word from  
the list then press  
. Either train, untrain  
or view its status. To train a word, press  
and follow the voice prompts.  
TRAIN ALL : Train Wake-Up set to recognize your voice.  
UNTRAIN ALL : Untrain Wake-Up set to recognize  
trained control words.  
Page 72 - Chapter 4  
Chapter 4 - Page 73  
8410altel 2003.12.12 12:25 AM Page 76  
VS MENU  
VS MENU  
TOP LEVEL  
VOICE DIAL  
Use Top Level to train or untrain the VR with your  
control words (Dial, Redial, Voice Memo, Phone Book,  
Cancel).  
Voice tags allow you to make calls in VR Mode by  
simply saying the person’s name. Using the VS Menu,  
you can list, add or erase voice tags for phone book  
entries.  
1. Press  
[MENU]  
.
LIST  
2. Select one of the following options, then press  
.
1. Press  
[MENU]  
.
LIST WORDS : Displays the list of control words in the top  
level set. Select a control word from the  
2. To list phone book entries with attached voice  
tags, press  
list then press  
. Either train, untrain or  
view its status. To train a word, press  
TRAIN ALL : Train Top level set to recognize your voice.  
UNTRAIN ALL : Untrain Top level set to recognize  
trained control words.  
.
.
3. Select one of the entries, then press  
4. Select an entry, then press [OK].  
[OK].  
DIGIT DIAL  
5. Select a phone number, then press  
6. “Enter voice tag?” will be displayed.  
[OK].  
Use Digit Dial to train or untrain the VR with the control  
words (1 to 9, Zero, Oh, Verify, Clear, Call).  
Press  
then say the name.  
1. Press  
[MENU]  
.
2. Select one of the following options, then press  
.
LIST WORDS 1, 2 : Displays the list of control words in the  
digit dial set. Select a control word  
from the list then press  
. Either  
train, untrain or view its status. To  
train a word, press  
voice prompts.  
and follow the  
TRAIN ALL : Train Digit dial set to recognize your voice.  
UNTRAIN ALL : Untrain Digit dial set to recognize  
trained control words.  
Page 74 - Chapter 4  
Chapter 4 - Page 75  
8410altel 2003.12.12 12:25 AM Page 78  
VS MENU  
VS MENU  
LIST  
VOICE SETTING  
1. Press  
[MENU]  
.
Customizes the voice service menu.  
2. To list phone book entries with attached voice  
UNTRAIN ALL  
tags, press  
.
1. Press  
[MENU]  
.
3. Select one of the entries, then press  
[OK].  
EDIT : Retrain / Voice Setting / Clear.  
PLAY : Play voice tag.  
2. Select “Yes” or “No”, then press  
.
4. Press  
[PLAY] to play a voice tag or  
[EDIT]  
PROMPT MODE  
to edit an existing voice tag.  
Use the prompt mode to select either beginner or expert  
mode. The expert mode consists of shorter texts and just  
beeps as opposed to the beginner mode that gives full  
instructions.  
5. If you select Edit, select one of the following options,  
then press [OK].  
1) Retrain: “Retrain Voice Name?” appears. Press  
then say a name.  
,
2) Voice Setting: “Change?” appears. Press  
phone number, then press  
, select a  
again.  
1. Press  
[MENU]  
.
3) Clear: “Removing Voice Names Proceed?” appears.  
Press  
.
2. Select “Beginner” or “Expert”, then press  
.
<Beginner mode>  
st  
CLEAR ALL  
1 prompt : “Main menu” followed by a short beep.  
nd  
2
prompt : “Speak a name to call, or say dial, redial, voice  
memo, phone book, or cancel”, followed by a  
short beep.  
1. Press  
[MENU]  
.
2. To erase all voice tags in the list, press  
.
<Expert mode>  
st  
1 prompt : A sequence of high and low tones.  
nd  
2
prompt : “Main menu”.  
3. “Removing all voice tags proceed?” appears.  
NOTE:  
4. Press  
[OK] and you will see the message,  
The VR times out and the phone returns to the standby  
mode after the 1st and 2nd prompts are heard and  
nothing is said.  
“Delete all tagged book entries too?”. Select No  
by pressing  
pressing  
, Yes by pressing  
and CLR by  
.
5. “All voice tags were deleted successfully” will be  
displayed.  
OK : Proceed to erase all the voice tags.  
CLR : Return to the previous page.  
Page 76 - Chapter 4  
Chapter 4 - Page 77  
8410altel 2003.12.12 12:25 AM Page 80  
VS MENU  
VR MODE  
DIGIT MODE  
Voice Recognition (VR) enables you to place calls and  
record voice memos using your voice. To activate VR  
Mode:  
Use the digit mode to select one of the following  
options ; ECHO, BEEP, ECHO+BEEP.  
1. Press and hold  
until your  
VR Mode  
1. Press  
[MENU]  
.
Say a name  
or a command  
phone turns to VR mode.  
2. Select one option, then press  
.
2. When the phone turns to VR mode,  
the screen on the right appears.  
MENU  
ECHO : Digit echoes back when entered.  
BEEP : Digit beeps when entered.  
ECHO + BEEP : Digit echoes and beeps when entered.  
NOTE: Depending on the prompt mode – expert or beginner  
– you will hear a different set of prompts as listed  
below. The second prompt will automatically play if  
nothing is said.  
HFK MODE  
Beginner Mode  
HFK stands for Hands-Free Car Kit. With this function,  
you can activate and utilize the VR feature when the  
phone is in hands-free car kit.  
st  
- 1 : “Main Menu”  
nd  
- 2 : “Speak a name to call, or say dial, redial, voice  
memo, phone book or cancel”.  
Expert Mode  
st  
1. Press  
[MENU]  
.
- 1 : “beep”  
nd  
- 2 : “Main Menu”  
2. Select “On” or “Off”, then press  
.
Once you say one of the following options, you will go  
through each of the procedures (name, dial, redial, voice  
memo, phone book, cancel).  
NOTE: Once you say “Wake-Up” and the phone  
recognizes your voice, you will hear a beep.  
The second time you say “Wake-Up”, your phone  
turns to VR mode.  
NAME  
1. Press and hold  
to VR mode.  
, until your phone turns  
2. In VR mode, say a recorded name or tag stored in the  
phone book, and the name and number will appear on  
the display and you will hear “Calling (name).”  
See page 75 for additional details.  
Page 78 - Chapter 4  
Chapter 4 - Page 79  
8410altel 2003.12.12 12:25 AM Page 82  
VR MODE  
VR MODE  
DIAL  
VOICE MEMO  
This feature is the same as on page 71, except you must  
use the phone to access the menu not your voice.  
1. Press and hold  
turns to VR mode.  
until your phone  
Digit Dial  
Say digits one at  
a time, or command  
1. Press and hold  
mode.  
until your phone turns to VR  
2. Say “Dial” and the display on the  
right will appear.  
MENU  
Depending on the prompt mode, expert or beginner, you  
will hear a different set of prompts that follows. You will  
hear the second prompt when nothing is said.  
2. Say “Voice Memo” instructions will appear and you  
will hear “Please record it at the tone”.  
3. To stop recording, press  
.
3. Press or say the digits of the phone number.  
4. After entering the entire number, say “Call”.  
To pause, press  
. To resume, press  
.
4. After recording a voice memo you can “Review”,  
“Re-record” or “Save”.  
NOTE:  
Beginner mode  
st  
- 1 prompt :“Digit menu”.  
PHONE BOOK  
nd  
- 2 prompt :“Say digits or verify, cancel, clear, or call”.  
Expert mode  
1. Press and hold  
mode.  
until your phone turns to VR  
st  
- 1 prompt :“doo-doo” (a sequence of high and low tones).  
nd  
- 2 prompt :“Digit menu”.  
2. Say “Phone Book”.  
REDIAL  
Phone book entries with voice tags will appear and each  
voice tag will play.  
1. Press and hold  
mode.  
until your phone turns to VR  
NOTE: To call a phone number with an attached voice  
tag, say “Yes” while the voice tag plays.  
2. To call the last dialed number, say “Redial”.  
CANCEL  
1. Press and hold  
mode.  
until your phone turns to VR  
Page 80 - Chapter 4  
Chapter 4 - Page 81  
8410altel 2003.12.12 12:25 AM Page 84  
MEMO  
Chapter 5  
SECURITY  
FEATURES  
This chapter addresses security features including  
locking and unlocking the phone, restricting calls  
and clearing the phone book.  
Page 82 - Chapter 4  
Chapter 5 - Page 83  
8410altel 2003.12.12 12:25 AM Page 86  
SECURITY FEATURES  
SECURITY FEATURES  
DIALED  
SECURITY  
Blocks all outgoing calls except emergency calls from  
being placed, but allows incoming calls to be answered.  
Prevents the unauthorized use of the handset and only  
allows access to certain features to those who have the  
password.  
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
then select “Allow” or “Restrict”.  
RESTRICT  
Restrict : Restricts outgoing calls.  
Allow : Allows outgoing calls.  
Enables you to restrict certain features with the  
password. Password must be entered to use restricted  
features.  
3. To save, press  
[OK].  
RECEIVED HISTORY  
AUTOMATIC LOCK  
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
Prevents others from using your phone without  
permission. When locked, the menu cannot be  
accessed without the password.  
then select “Allow” or “Restrict”.  
Restrict : Restrict access to received call history.  
Allow : Allow access to received call history.  
1. Press  
[MENU]  
then enter “Password”.  
2. Press  
then select “Off”, “Lock Now” or  
3. To save, press  
[OK].  
“Power Up”.  
DIALED HISTORY  
Off : Do not lock the phone.  
Lock Now : Lock the phone now.  
Lock On Power Up : Lock the phone whenever it is  
turned on.  
1. Press  
[MENU]  
then enter “Password”.  
2. Press  
then select “Allow” or “Restrict”.  
Restrict : Restrict access to the dialed call history.  
Allow : Allow access to the dialed call history.  
3. To save, press  
[OK].  
NOTE: The default password is the last 4 digits of your  
phone number.  
3. To save, press  
[OK].  
NOTE: The default password is the last 4 digits of your  
phone number.  
Page 84 - Chapter 5  
Chapter 5 - Page 85  
8410altel 2003.12.12 12:25 AM Page 88  
SECURITY FEATURES  
SECURITY FEATURES  
MENU  
900 #’S  
To restrict calling 900 dial service numbers:  
To block access to the menu to prevent any changes:  
1. Press  
[MENU]  
then enter “Password”.  
1. Press  
[MENU]  
then enter “Password”.  
2. Press  
then select “Allow” or “Restrict”.  
2. Press  
then select “Allow” or “Restrict”.  
Restrict : Restrict access to the menu.  
Allow : Allow access to the menu.  
Restrict : Restrict calls to 900-dial services.  
Allow : Allow 900-dial services.  
3. To save, press  
[OK].  
3. To save, press  
[OK].  
PHONE BOOK  
To block access to, and protect data in your phone book.  
LONG DISTANCE  
To restrict calling long distance numbers – the phone is  
limited to calling numbers within the area:  
1. Press  
[MENU]  
then enter “Password”.  
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
2. Press  
then select “Allow” or “Restrict”.  
Restrict : Restrict access to the phone book.  
Allow : Allow access to the phone book.  
then select “Allow” or “Restrict”.  
Restrict : Restrict long distance calls.  
Allow : Allow long distance calls.  
3. To save, press  
[OK].  
DATA CALL  
3. To save, press  
[OK].  
To restrict data calls from being placed:  
NOTE: A phone number over 7 digits is restricted.  
1. Press  
[MENU]  
then enter “Password”.  
NOTE: The default password is the last 4 digits of your  
phone number.  
2. Press  
then select “Allow” or “Restrict”.  
Restrict : Restrict data calls.  
Allow : Allow data calls.  
3. To save, press  
[OK].  
Data Call Types : 1x express/qnc/fax/async data/AXCESS/  
mobile web  
NOTE: The default password is the last 4 digits of your  
phone number.  
Page 86 - Chapter 5  
Chapter 5 - Page 87  
8410altel 2003.12.12 12:25 AM Page 90  
SECURITY FEATURES  
SECURITY FEATURES  
SPECIAL #’S  
RESET PHONE  
Special #’s allows you to store 3 phone numbers that  
can be called even when the phone is in the lock mode.  
Resetting the phone restores it to the original default  
settings. Any changes you made to options or features  
will return to the factory settings. To reset the phone:  
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
then select a location.  
.
3. Press  
press  
[OK] then input a phone number;  
[OK] again to save.  
3. Select “Yes” or “No”, then press  
[OK].  
When you select “Yes”, you will see “Wait a moment”  
CLEAR PHONE BOOK  
on the display and the phone will restart.  
To clear all phone book entries:  
CHANGE PASSWORD  
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
To change your password:  
.
1. Press  
2. Press  
[MENU]  
then enter “Password”.  
3. Select “Yes” or “No”, then press  
[OK].  
.
NOTE: The default password is the last 4 digits of your  
phone number.  
3. Enter a new password then press  
[OK].  
4. Enter the new password again then press  
[OK].  
NOTE: The default password is the last 4 digits of your  
phone number.  
Page 88 - Chapter 5  
Chapter 5 - Page 89  
8410altel 2003.12.12 12:25 AM Page 92  
SECURITY FEATURES  
WAP  
USER ID  
To change your User ID:  
1. Press  
[MENU]  
then enter “Password”.  
NOTE: The default password is the last 4 digits of your  
phone number.  
Chapter 6  
2. Press  
.
SUPPLEMENTARY  
FUNCTIONS  
3. Press  
for “USER ID”. Your User ID appears in the  
Editor screen.  
4. Press  
To change your User ID:  
1. Press [MENU]  
to store.  
This chapter addresses supplemental functions including  
the schedule, calculator, clock and stopwatch features.  
then enter “Password”.  
NOTE: The default password is the last 4 digits of your  
phone number.  
Schedule  
Calculator  
World Clock  
Stopwatch  
2. Press  
.
3. Press  
for “PASSWORD”. Your password appears  
in the Editor screen.  
4. Press  
to store.  
Page 90 - Chapter 5  
Chapter 6 - Page 91  
8410altel 2003.12.12 12:25 AM Page 94  
SCHEDULE  
SCHEDULE  
The schedule allows you to set an event and reminds  
you of that event.  
ALARM  
You can set up to 3 alarms.  
EVENT  
1. To display alarm entries, press  
[MENU]  
.
1. To display a calendar, press  
2. Select New Event.  
[MENU]  
.
2. Select one of the entries. To set a new alarm, choose  
item 1, 2 or 3. To edit an existing alarm, select that  
alarm. Press  
.
3. Move the Navigation Key to choose a date in the  
calendar then press [OK].  
To delete the existing one, press  
.
Day to Day movement : Move the Navigation Key left  
3.1. To set a time, press  
Menu.  
Use the Navigation Key to choose an alarm frequency  
from the Alarm Setting  
and right.  
Week to Week movement : Move the Navigation Key  
down and up.  
(Once, Daily, Weekly, Monthly, Yearly).  
4.1. To set a time for an event, press  
. Enter the  
To save, press  
[STO]. “Save Complete” will be  
event name then press  
To save the event, press  
[STO].  
[STO] again.  
displayed and the screen will return to the alarm list.  
3.2. To set a melody, press  
Menu.  
from the Alarm Setting  
Choose one of the following on the first line: On time,  
10 Min before, 30 Min before, 1 Hour before, No alarm.  
Change the date and time in the second line by moving  
to year, month, day, time input with the navigation key.  
Use the Navigation Key to scroll through the list of  
11 ringtones and 9 melody tones. To set a melody,  
press  
[OK].  
4.2. To set a melody for the event, press  
Select a melody then press [OK].  
.
3.3. To set a snooze, press  
Menu.  
from the Alarm Setting  
from the Alarm Setting  
4.3. To set a message for the event, press  
.
3.4. To set a pause, press  
Menu.  
Select one of the following : No use,  
1 time after 3 minutes,  
5. Press  
calendar.  
[OK] to save it or  
[CLR] to return to the  
1 time after 5 minutes,  
3 times by 3 minutes.  
6. “Save complete” appears. When you return to the  
calendar the day will be highlighted.  
The date of the event will be marked on your calendar.  
Page 92 - Chapter 6  
Chapter 6 - Page 93  
8410altel 2003.12.12 12:25 AM Page 96  
CALCULATOR  
WORLD CLOCK  
CALCULATOR  
WORLD CLOCK  
Allows you to use the CDM-8410 as a calculator to  
perform basic mathematic functions (addition,  
subtraction, multiplication, division).  
Notifies you of the time in a specific preprogrammed city.  
1. Press [MENU]  
2. Select a city, then press  
.
1. Press  
[MENU]  
.
[OK].  
2. Follow the instructions below to calculate (8*6)/4-2.5  
3. The world map appears with the city, its date  
and time.  
Input 8.  
Use the Navigation Key to select another city.  
Move the Navigation key leftward.  
Input 6 then press the Navigation Key.  
Move it rightward.  
Input 4 then press the Navigation Key.  
Move it downward.  
Input 2 then press the  
Press 5,  
to input (.).  
.
3. To reset, press  
[RST].  
NOTE: 1. Up to 10 integer digits and up to 2 decimals  
can be displayed. If the calculated result  
has more than 10 digits, the result is  
displayed in 10 digit logarithm.  
2. There is no (-) sign. To express a negative  
number, use ‘0-value’.  
Page 94 - Chapter 6  
Chapter 6 - Page 95  
8410altel 2003.12.12 12:25 AM Page 98  
STOPWATCH  
STOPWATCH  
Simultaneously times up to six different events.  
To operate the stopwatch:  
1. Press  
[MENU]  
.
Chapter 7  
2. To measure a time period.  
VOICE MAIL AND  
TEXT MESSAGES  
To start the stopwatch, press  
[START].  
To pause it, press  
To resume, press  
[STOP].  
[START].  
To reset the counter, press  
[RST].  
This chapter addresses checking voice mail messages,  
as well as sending and receiving text messages.  
3. To time up to six events at once:  
To start, press  
To stop a time period and continue measuring another  
one, press [CONT].  
To stop the second and continue measuring a third one,  
press [CONT].  
[START].  
Two-Way SMS  
Checking Messages  
Sending Text Messages  
Inbox  
To measure up to six time periods, repeat the above  
Outbox  
Web Alerts  
Saved  
My Object  
Erase All  
steps.  
To stop, press  
press [VIEW].  
To return to the stopwatch, press  
. To review the results,  
or  
[CLR].  
To reset it, press  
[RST].  
Settings  
Page 96 - Chapter 6  
Chapter 7 - Page 97  
8410altel 2003.12.12 12:25 AM Page 100  
TWO-WAY SMS  
CHECKING MESSAGES  
Your CDM-8410 features Two-Way Short Message  
Service (SMS). This feature sends and receives text  
messages through your phone. Voice mail notification is  
also supported.  
CHECKING RECEIVED VOICE MAIL MESSAGE  
1. Press  
[MENU]  
or  
for “Voice Mail”.  
2. The number of voice mail messages currently  
waiting in your mailbox appears. To access your  
MESSAGE INDICATORS  
voice mailbox, press  
.
The following symbols indicate the status of message  
received by your phone. These symbols appear for  
voice mail and text messages.  
CHECKING RECEIVED TEXT MESSAGE  
1. Press  
[MENU]  
or  
“Inbox”.  
: Text Message  
2. Highlight the message you want to view then press  
[SEL]. The text message is displayed.  
: Voice + Text Mail Message  
: Voice Mail Message  
3. To view the inbox message menu, press  
[OPTS].  
You can reply, erase, forward, save, save address,  
save object, lock&unlock, block sender, save quick  
text, reply with copy.  
RECEIVED MESSAGE NOTIFICATION  
When your phone receives a message, the screen  
displays the number of new text messages and voice  
mail messages.  
1. To display the received message, press  
.
Page 98 - Chapter 7  
Chapter 7 - Page 99  
8410altel 2003.12.12 12:25 AM Page 102  
SENDING TEXT MESSAGES  
SENDING TEXT MESSAGES  
PRIORITY  
SENDING NEW TEXT MESSAGES  
Marks messages as urgent.  
1. Press  
[MENU]  
or  
.
1. To send an urgent message, press  
2. Select the priority (Normal/Urgent),  
“Priority”.  
2. Input a new phone number then press  
[OK].  
You can look it up a number in the phone book by  
pressing [PB].  
then press  
[OK].  
3. Input a new text message then press  
[NEXT].  
CALL BACK  
Press  
[OPTS]. Menu choices include Canned Text,  
Allows you to input a specific call back number.  
Your phone number is the default.  
My Object and Predefined Object.  
SEND  
1. To send the text message, press  
1. To change the call back number, press  
“Call Back”.  
.
2. Input call back number, then press  
[OK].  
If “Delivery Failed. Retry in 3 mins?” Appears,  
press to select Auto retry.  
SAVE  
This allows you to save the message into “Outbox”  
folder to use later.  
EDIT RECIPIENT  
Edits the recipient’s information – select if a wrong  
number is entered.  
1. To save the text message, press  
“Save”.  
INSERT SIGNATURE  
1. To change the recipient, press  
.
1. To Include user's signature in message,  
press “Insert Signature”.  
2. Input a new phone number, then press  
3. Input a new text message, then press  
[OK].  
[OK].  
2. Select (No/Yes), then press  
[OK].  
4. To send, press  
.
SAVE ENTERED TEXT  
EDIT MESSAGE  
1. To save a text message as a canned message,  
press “Save Entered Text”.  
1. To change the text message, press  
.
With this feature you can create and save a signature  
to include in messages.  
2. Input a new text message, then press  
[OK].  
Page 100 - Chapter 7  
Chapter 7 - Page 101  
8410altel 2003.12.12 12:25 AM Page 104  
INBOX  
INBOX  
The Inbox Menu options help you manage received text  
messages. To access the menu:  
INBOX MENU  
Manages received text messages.  
FORWARD  
1. Press  
[MENU]  
or  
.
1. To forward the text message, press  
“Forward”.  
: Urgent New Msg (not read)  
: Urgent read Msg  
: New Msg (not read)  
: Old Msg (already read)  
: Lock (already read and locked)  
2. Input the phone number of the person you are sending  
the message, then press [OK].  
3. Input any text message to go along with the  
forwarded message, then press [OK].  
2. Select a message then press  
The message is displayed.  
[SEL].  
SAVE  
1. To save the text message in your phone,  
3. Press  
[OPTS].  
press  
“Save”.  
REPLY  
2. Press  
.
1. To reply to the text message, press  
.
SAVE ADDRESS  
2. Type your reply then press  
[OK].  
1. To save the call back number from the text  
ERASE  
message, press  
“Save Address”.  
1. To erase the text message, press  
2. When you see “Delete Msg?”, press  
.
2. To save the call back number into a memory  
location, follow the procedures for “Storing  
phone numbers” on page 32.  
[YES].  
SAVE OBJECT  
1. To save an object (Sound/Graphics/Animation) file  
from a received message, press  
“Save object”.  
Page 102 - Chapter 7  
Chapter 7 - Page 103  
8410altel 2003.12.12 12:25 AM Page 106  
INBOX  
OUTBOX  
LOCK & UNLOCK  
OUTBOX MENU  
Manages sent text messages or messages waiting to be  
sent.  
1. To lock or unlock the text message, press  
“Lock/Unlock”.  
2. Select “Lock” to lock the message or “Unlock” to  
1. Press  
[MENU]  
or  
.
unlock the message, then press  
[OK].  
: Auto resend  
: Delivered  
: Fail  
BLOCK SENDER  
: Not send  
: Read  
1. Block all incoming messages from the block list.  
: Sent  
BLOCK : Enter the address to block.  
UNBLOCK : Enter the address to remove from block.  
VIEW LIST OF BLOCKED ADDRESS : Display the blocked  
list on LCD.  
2. Select a message then press  
The message is displayed.  
[OK].  
3. Press  
[OPTS].  
SAVE QUICK TEXT  
RESEND  
1. Save the received message into canned message.  
REPLY WITH COPY  
1. To resend a text message, press  
.
SEND TO  
1. Reply to the received message with received phone  
number and contents.  
1. To send a message to another person, press  
.
2. Input the phone number then press  
3. Input a text message then press  
.
.
Page 104 - Chapter 7  
Chapter 7 - Page 105  
8410altel 2003.12.12 12:25 AM Page 108  
OUTBOX  
WEB ALERTS  
The Outbox Menu options help you manage sent text  
messages or messages waiting to be sent.  
To access the menu:  
WEB ALERTS  
1. Press  
[MENU]  
or  
.
.
ERASE  
2. To select GoTo, press  
To select Erase Message, press  
.
1. To erase a text message, press  
.
3. The text message will be displayed.  
2. When you see “Delete Msg?”, press  
SAVE ADDRESS  
[YES].  
: Read Message.  
V
: Unread Message.  
: Displays the remaining text.  
GoTo : Connecting Selected Site.  
Erase : Erase Selected Message.  
1. To save the Callback number,  
press  
“Save Address”.  
2. Select the phone number then press  
[OK].  
Follow the procedures for “STORING PHONE  
NUMBERS” on page 32.  
SAVE  
1. To save the outbox text message in the Saved Folder,  
press  
.
LOCK & UNLOCK  
1. To lock or unlock the text message, press  
“Lock/Unlock”.  
2. Select “Lock” to lock the message or “Unlock” to  
unlock the message, then press  
.
STATE  
1. To display the status of an outbox message,  
press  
.
Page 106 - Chapter 7  
Chapter 7 - Page 107  
8410altel 2003.12.12 12:25 AM Page 110  
SAVED  
MY OBJECT  
SAVED  
MY OBJECT  
My Object is a folder that saves EMS Object  
(Sound, Picture, Animation)  
Manages saved messages from the Inbox/Outbox.  
1. Press  
[MENU]  
or  
.
1. Press  
[MENU]  
or  
.
2. Select a message then press  
The message is displayed.  
[OK].  
2. Select a text message, then press  
[OK].  
SOUND  
3. Press  
[OPTS].  
1. To name, play or erase saved sound objects,  
press  
[MENU]  
.
4.1. If the text message is saved  
from the “Inbox” menu,  
2. Select “Name” to rename a sound with  
or “Play”  
this screen will be displayed.  
to play a sound with  
3. To erase a sound, press  
GRAPHICS  
1. To name, play or erase saved graphic objects,  
press [MENU]  
.
.
4.2. If the text message is saved  
from the “Outbox”  
.
menu, this screen will be  
displayed.  
2. Select “Name” to rename a graphic with  
or  
“View” to view a graphic with  
3. To erase a graphic, press  
ANIMATION  
.
5. Select one by pressing  
.
.
1. To name, play or erase saved animation objects,  
press [MENU]  
.
2. Select “Name” to rename animation with  
or  
“View” to view animation with  
.
3. To erase animation, press  
.
Page 108 - Chapter 7  
Chapter 7 - Page 109  
8410altel 2003.12.12 12:25 AM Page 112  
ERASE ALL  
SETTINGS  
ERASE MESSAGES  
SETTINGS MENU  
Erases all the messages from the “Inbox”, “Outbox”,  
“Saved” or “My Object” folder.  
Manages messaging features through various options.  
1. Press [MENU] or “Settings”.  
1. Press  
[MENU]  
or  
.
SAVE SENT MESSAGES  
2.1. To erase all the inbox messages, press  
.
Saves every sent message.  
Erases entire inbox or old inbox.  
1. Press  
“Save Sent MSG”.  
2.2. To erase all the outbox messages, press  
.
Erases entire outbox or old outbox.  
2. Select “No”, “Yes”, or “Prompt”, then press  
[OK].  
2.3. To erase the saved messages, press  
.
If you select Prompt, each time you send a message you  
will be asked if you want to save it.  
2.4. To erase the My Object, press  
.
3. Select “Yes” by pressing  
Select “No” by pressing  
.
DEFAULT CALL BACK NUMBER  
.
Edits a default call back number so that the recipient can  
call back or reply.  
Old : Only ereases read Message(s).  
Entire : Erases all the message(s) in the Inbox.  
1. Press  
“Default Call Back”.  
2. Input a call back number, then press  
[OK].  
Page 110 - Chapter 7  
Chapter 7 - Page 111  
8410altel 2003.12.12 12:25 AM Page 114  
SETTINGS  
SETTINGS  
ALERT  
ENTRY MODE  
Enables phone to alert you of an incoming message.  
Sets an Entry Mode as a default.  
The T9 mode indicator will appear whenever the input  
mode is activated if the T9 mode is the default.  
1. Press  
“Alert”.  
2. Select “Ringer”, “Vibrate”, “Silent”, “Ringer &  
Remind”, or “Vibrate & Remind”.  
1. Press  
2. Select “T9 Mode” or “Alpha Mode”.  
3. Press [OK].  
Entry Mode”.  
The Ringer & Remind or Vibrate & Remind rings or  
vibrates every 2 minutes to remind you of an incoming  
message. This will stop when any key is pressed.  
3. Press  
[OK].  
BLOCK OR UNBLOCK  
Block : Blocks numbers that the user wants to block.  
AUTO ERASE  
Unblock : Deactivates the Block.  
Automatically erases (Inbox/Outbox) messages when  
new messages arrive.  
1. Press  
“Block or Unblock”.  
2. Select “Block”, “Unblock”, or “View List of Blocked  
Address”.  
AUTO ERASE INBOX  
1. Press  
2. Select “Disable” or “Old Inbox”.  
3. Press [OK].  
AUTO ERASE OUTBOX  
“Auto Erase Inbox”.  
3. Press  
[OK].  
1. Press  
“Auto Erase Outbox”.  
2. Select “Disable” or “Old Outbox”.  
3. Press  
[OK].  
Page 112 - Chapter 7  
Chapter 7 - Page 113  
8410altel 2003.12.12 12:25 AM Page 116  
SETTINGS  
SIGNATURE  
With this feature you can create and save a signature  
to include in messages.  
1. Press  
“Signature”.  
Chapter 8  
2. Select “Edit Signature” or “Insert Signature”.  
EDIT SIGNATURE : Edit user's signature.  
INSERT SIGNATURE : Select whether the signature will  
be included into sending  
MAKING AN  
EMERGENCY CALL  
message.  
3. Press  
[OK].  
DIRECT VIEW  
Read the received message without entering the  
inbox in the SMS menu.  
1. Press  
2. Select “Yes” or “No”.  
3. Press [OK].  
“Direct View”.  
YES : Set to read msg without entering inbox in SMS  
menu.  
NO : Set to read msg after entering inbox in SMS menu.  
Page 114 - Chapter 7  
Chapter 8 - Page 115  
8410altel 2003.12.12 12:25 AM Page 118  
EMERGENCY CALLING  
This 911 feature puts phone in the Emergency Call  
Mode when you dial the preprogrammed emergency  
number, 911. It also operates in the lock mode and out  
of the service area.  
911 IN LOCK MODE  
Chapter 9  
The “911” call service is available even in the lock mode.  
AXCESS  
&
1. Enter “911” and press  
2. The call connects.  
.
INTERNET  
3. The phone exits the Lock Mode for 5 minutes.  
When the call ends, the phone returns to the  
Lock Mode.  
This chapter addresses using your handset to access  
the Wireless Internet.  
911 USING ANY AVAILABLE SYSTEM  
AXCESS  
Start Internet Browser  
Browser Menu  
1. Enter “911” and press  
2. The call connects.  
.
3. The phone maintains the Emergency Mode for  
5 minutes.  
When the call ends, the phone returns to the  
Lock Mode.  
The phone continuously attempts to receive service  
from any available system.  
Page 116 - Chapter 8  
Chapter 9 - Page 117  
8410altel 2003.12.12 12:25 AM Page 120  
AXCESS  
AXCESS  
Your phone provides “Axcess”, a unique feature that  
enables you to download melody ringers, wallpapers,  
games, and more from your network to your phone.  
Please contact your service provider for the availability  
of these services.  
DOWNLOADING MELODIES/WALLPAPERS  
Before downloading melody ringers and wallpapers,  
you need to download the dedicated downloader.  
Please contact your service provider for details.  
APPLYING MELODIES/WALLPAPERS  
START AXCESS  
Downloaded melody ringers apply to several functions  
including the incoming call alert, new text message alert,  
alarm clock and scheduler alarm.  
1. To launch “Axcess” from the standby mode,  
press  
[MENU]  
or press and hold  
.
See Ringer Type on page 54.  
2. When two or more icons appear on the screen,  
select an application with  
3. To start the application, press  
4. To end the application, press  
.
Downloaded wallpapers apply to the standby mode.  
See Wallpaper on page 62.  
.
.
CHECKING DATA FOLDER MEMORY  
The phone will return to the standby mode.  
Downloaded melody ringers, wallpapers and applications  
are saved to the data folder in your phone.  
DOWNLOADING APPLICATIONS  
1. Press  
[MENU]  
or press the  
then press  
.
1. Press  
[MENU]  
or press the  
then press  
.
.
2. Select “Settings” with  
.
2. Select “Axcess” with  
3. Select “Manage Apps” with  
then press  
.
3. Select a folder in catalog with  
then press  
.
The memory status will be displayed.  
4. The phone will access your service provider’s server.  
Follow the prompt to download applications.  
4. To exit, press  
.
To select an option, press  
When a prompt appears, press  
to cancel.  
then press  
.
to proceed or  
Page 118 - Chapter 9  
Chapter 9 - Page 119  
8410altel 2003.12.12 12:25 AM Page 122  
AXCESS  
START INTERNET BROWSER  
ERASING AN APPLICATION  
ACCESS THE INTERNET  
Your CDM-8410 allows you to browse various Internet  
websites directly from your phone. This provides you  
with access to up-to-date information such as news,  
sports, weather and stock quotes when you subscribe  
to Internet service with your service provider. Please  
contact your service provider for a list of available  
websites and service details.  
1. Press  
[MENU]  
or press and hold  
then press  
.
2. Select “Settings” with  
.
3. Select “Manage Apps” with  
then press  
.
The memory status will be displayed.  
4. Select the application to be erased with  
then  
1. To start your Internet browser and access websites  
press  
.
through your wireless handset press  
or press  
[MENU]  
.
5. Select “Remove” then press  
.
Page 120 - Chapter 9  
Chapter 9 - Page 121  
8410altel 2003.12.12 12:26 AM Page 124  
BROWSER MENU  
BROWSER MENU  
BOOKMARKS  
BROWSER MENU  
The browser menu lists the actions necessary to  
operate the browser.  
N To view your bookmark list, press  
press , then press  
[MENU]  
or  
.
To access the browser menu, press  
[MENU]  
or  
This provides easy website access without entering  
its URL.  
press  
.
BACK  
INBOX  
Displays inbox list.  
N To return to the previous page, press  
or press , then press  
[MENU]  
.
N To select Inbox, press  
[MENU]  
[MENU]  
or press  
or press  
or press  
,
then press  
.
HOME  
N To display the homepage, press  
RELOAD  
[MENU]  
or  
press  
EXIT  
N To exit browser, press  
, then press  
.
Reloads current page.  
N To select Reload, press  
then press  
,
.
[MENU]  
or press  
,
.
then press  
.
SETTINGS  
MARK SITE  
Displays Browser Menu Settings.  
N To add the current page to your bookmark list,  
press [MENU] or press , then press  
N To select Settings, press [MENU]  
,
then press  
.
“No bookmark service site” is displayed when the  
HOMEPAGE  
Internet site cannot support the bookmark service.  
Enables you to change the homepage.  
N To select Homepage, press  
.
Page 122 - Chapter 9  
Chapter 9 - Page 123  
8410altel 2003.12.12 12:26 AM Page 126  
BROWSER MENU  
PROXY  
Enables you to select another WAP PROXY.  
N To select Set UP.Link, press  
.
CIRCUIT LINGER  
N To select Circuit Linger Timer, press  
.
Chapter 10  
SCROLL MODE  
DATA SERVICE  
N To select scroll mode, press  
SCROLL SPEED  
.
N To select scroll speed, press  
KEY PRESS TIMEOUT  
.
N To select Key Press Timeout, press  
.
Your phone works as a wireless modem when  
connected to a PC or a Laptop computer with a data  
interface cable. This chapter shows you how to choose  
the correct settings for this to properly function.  
SECURITY  
Displays Security Menu Options.  
N To select Security, press  
.
ADVANCED  
Displays Advanced Menu options.  
N To select Advanced, press  
.
SHOW URL  
Displays the URL (Uniform Resource Locator) of the  
current page.  
1. To select Show URL, press  
.
RESTART BROWSER  
Causes the deck history and deck cache to be cleared  
and starts a new session with the UP.Link.  
1. To select Restart Browser, press  
.
Page 124 - Chapter 9  
Chapter 10 - Page 125  
8410altel 2003.12.12 12:26 AM Page 128  
DATA SVC  
CONNECTION  
To select a connection mode based on the handset  
usage:  
1. Press  
[MENU]  
.
Chapter 11  
2. Select one of the following connection modes:  
Voice Call : To receive a voice call.  
Data Only : To receive data when connected to PC.  
Fax Only : To function as a fax when connected to PC.  
SAFETY  
INFORMATION  
3. To save, press  
[OK].  
NOTE: This function is available only when the phone is  
connected to a data cable.  
Safety Information for Wireless Handheld Phones  
Safety Information for FCC RF Exposure  
SAR Information  
WAP/AXCESS  
When connected to WAP or BREW, allows the user to  
either choose QNC or 1X.  
FDA Consumer Update  
Page 126 - Chapter 10  
Chapter 11 - Page 127  
8410altel 2003.12.12 12:26 AM Page 130  
SAFETY INFORMATION FOR  
SAFETY INFORMATION FOR  
WIRELESS HANDHELD PHONES  
WIRELESS HANDHELD PHONES  
ANTENNA CARE  
Read This Information Before Using Your Handheld  
Portable Cellular Telephone  
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas, modifications, or attachments could  
damage the phone and may violate FCC regulations.  
EXPOSURE TO RADIO FREQUENCY SIGNALS  
Your wireless handheld portable telephone is a low power radio  
transmitter and receiver. When it is ON, it receives and also  
sends out radio frequency (RF) signals.  
PHONE OPERATION  
Normal Position: Hold the phone as you would any other  
telephone with the antenna pointed up and over your shoulder.  
In August 1996, the Federal Communications Commissions  
(FCC) adopted RF exposure guidelines with safety levels for  
handheld wireless phones. Those guidelines are consistent  
with the safety standards previously set by both U.S. and inter-  
national standards bodies:  
Tips on efficient operation:  
- Extend your antenna fully.  
- Do not touch the antenna unnecessarily when the phone  
is in use. Contact with the antenna affects call quality and  
may cause the phone to operate at a higher power level  
than otherwise needed.  
ANSI C95.1 (1992) *  
NCRP Report 88 (1986) *  
ICNIRP (1996) *  
DRIVING SAFETY  
Those standards were based on comprehensive and periodic  
evaluations of the relevant scientific literature. For example,  
over 120 scientists, engineers, and physicians from universi-  
ties, government health agencies, and industry reviewed the  
available body of research to develop the ANSI Standard  
(C951).  
Talking on the phone while driving is extremely dangerous and  
is illegal in some states. Remember, safety comes first. Check  
the laws and regulations on the use of phones in the areas  
where you drive. Always obey them.  
Also, if using your phone while driving please:  
The design of your phone complies with the FCC guidelines  
(and those standards).  
- Give full attention to driving. Driving safely is your first  
responsibility.  
- Use hands-free operation, if available.  
- Pull off the road and park before making or answering a  
call, if driving conditions require.  
;
˙
American National Standards Institute;  
National Council on Radiation Protection and Measurements;  
International Commission on Nonionizing Radiation Protection.  
Chapter 11 - Page 129  
Page 128 - Chapter 11  
8410altel 2003.12.12 12:26 AM Page 132  
SAFETY INFORMATION FOR  
SAFETY INFORMATION FOR  
WIRELESS HANDHELD PHONES  
WIRELESS HANDHELD PHONES  
ELECTRONIC DEVICES  
ELECTRONIC DEVICES  
Other Medical Devices  
Most modern electronic equipment is shielded from RF  
energy. However, certain electronic equipment may not be  
shielded against the RF signals from your wireless phone.  
If you use any other personal medical device, consult the man-  
ufacturer of your device to determine if they are adequately  
shielded from external RF energy Your physician may be able  
to assist you in obtaining this information.  
Pacemakers  
The Health Industry Manufacturers Association recommends  
that a minimum separation of six (6”) inches be maintained  
between a handheld wireless phone and a pacemaker to  
avoid potential interference with the pacemaker. These rec-  
ommendations are consistent with the independent research  
by and recommendations of Wireless Technology Research.  
Turn your phone OFF in healthcare facilities when any regula-  
tions posted in these areas instruct you to do so. Hospitals or  
healthcare facilities may be using equipment that could be sen-  
sitive to external RF energy.  
If you have a pacemaker:  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that  
has been added to your vehicle.  
l
ALWAYS keep the phone more than six inches from  
your pacemaker when the phone is turned on.  
l
l
Do not carry the phone in a breast pocket.  
Use the ear opposite the pacemaker to minimize the  
potential for interference.  
An airbag inflates with great force. DO NOT place objects,  
including both installed or portable wireless equipment, in the  
area over the airbag or in the air bag deployment area.  
If in-vehicle wireless equipment is improperly installed and the  
air bag inflates, serious injury could result.  
l
If you have any reason to suspect that interference is  
taking place, turn your phone OFF immediately.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing  
aids. In the event of such interference, you may want to  
consult your service provider (or call the customer service line  
to discuss alternatives).  
Posted Facilities  
Turn your phone OFF where posted notices so require.  
Page 130 - Chapter 11  
Chapter 11 - Page 131  
8410altel 2003.12.12 12:26 AM Page 134  
SAFETY INFORMATION FOR  
SAFETY INFORMATION FOR  
WIRELESS HANDHELD PHONES  
WIRELESS HANDHELD PHONES  
OTHER SAFETY GUIDELINES  
Aircraft  
PRECAUTIONS AND WARNINGS  
Please read and understand all of the Precautions and  
Warnings contained in this manual before attempting to oper-  
ate your phone.  
FCC Regulations prohibit using your phone while in the air.  
Switch OFF your phone before boarding an aircraft.  
1. DO NOT use this equipment in an extreme environment  
where high temperature or high humidity exists, such as  
near a heater or in a closed car parked in the sun.  
Blasting Areas  
To avoid interfering with blasting operations, turn your phone  
OFF when in a “blasting area” or in areas posted: “Turn off two-  
way radio.” Obey all signs and instructions.  
2. DO NOT abuse the equipment. Avoid striking, shaking or  
shocking. When not using the unit, lay down the unit to  
avoid possible damage due to instability.  
Potentially Explosive Atmospheres  
3. DO NOT expose this equipment to liquids such as rain or  
spilled beverages.  
Turn your phone OFF when in any area with a potentially explo-  
sive atmosphere and obey all signs and instructions. Sparks in  
such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
4. DO NOT use unauthorized accessories. Use of unautho-  
rized accessories may result in fire, electric shock or other  
bodily injury.  
Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include fueling areas such as gas  
stations; below deck on boats; fuel or chemical transfer or stor-  
age facilities; vehicles using liquefied petroleum gas (such as  
propane or butane); areas where the air contains chemicals or  
particles, such as grain, dust, or metal powders; and any other  
area where you would normally be advised to turn off your  
vehicle’s engine.  
5. DO NOT disassemble the phone or its accessories.  
If service or repair is required, return the unit to an author-  
ized Audiovox service center. If unit is disassembled, the  
risk of electric shock or fire may result.  
6. DO NOT short-circuit the battery terminals with metal  
items etc.  
7. DO NOT use harsh chemicals, cleaning solvents or strong  
detergents to clean this phone. Always clean it with a soft,  
damp cloth.  
8. DO NOT paint this phone. This can clog moving parts.  
Page 132 - Chapter 11  
Chapter 11 - Page 133  
8410altel 2003.12.12 12:26 AM Page 136  
SAFETY INFORMATION FOR  
WIRELESS HANDHELD PHONES  
SAFETY INFORMATION FOR  
FCC RF EXPOSURE  
OPERATING PROCEDURES  
WARNING! Read this information before using your phone  
Never violate any of the following Rules and Regulations of the  
FCC when using your phone. The following offenses are  
punishable by fine, imprisonment, or both:  
CAUTION  
In August 1996, the Federal Communications Commission (FCC) of  
the United States with its action in Report and Order FCC 96-326  
adopted an updated safety standard for human exposure to radio fre-  
quency electromagnetic energy emitted by FCC regulated transmit-  
ters. Those guidelines are consistent with the safety standard previ-  
ously set by both U.S. and international standards bodies. The design  
of this phone complies with the FCC guidelines and these internation-  
al standards.  
- Using obscene, indecent, or profane language.  
- Using the unit to give off false distress calls.  
- Wiretapping or otherwise intercepting a telephone call, unless  
that person has first obtained the consent of the parties  
participating in the call.  
Use only the supplied or an approved antenna. Unauthorized anten-  
nas, modifications, or attachments could impair call quality, damage  
the phone, or result in violation of FCC regulations.  
- Making anonymous calls to annoy, harass, or molest other  
people.  
Do not use the phone with a damaged antenna. If a damaged anten-  
na comes into contact with the skin, a minor burn may result. Please  
contact your local dealer for replacement antenna.  
- Charging to an account without authorization to avoid  
payment for service.  
Body-worn Operation (Holster Part Number : 2H020665002)  
- Refusing to yield a party line when informed that it is needed  
for an emergency call (It is also unlawful to take over a party  
line by stating falsely that it is needed for an emergency).  
This device was tested with holster (Part No:2H020665002) for body-  
worn operation with the back of the phone kept 0.59 inchs (15mm)  
from the body. To comply with FCC RF exposure requirements, a min-  
imum separation distance of 0.59 inchs (15mm) must be maintained  
between the user's body and the back of the phone, including the  
antenna, whether extended or retracted. All belt-clips, holsters and  
similar accessories used by this device must not contain any metallic  
components. Body-worn accessories that do not meet these require-  
ments may not comply with FCC RF exposure limits and should be  
avoided.  
Note: For more information about RF exposure, please visit the FCC  
Page 134 - Chapter 11  
Chapter 11 - Page 135  
8410altel 2003.12.12 12:26 AM Page 138  
SAR INFORMATION  
SAR INFORMATION  
as described in this user guide, is 0.633 W/kg. (Body-worn measure-  
ments differ among phone models, depending upon available acces-  
sories and FCC requirements). While there may be differences  
between the SAR levels of various phones and at various positions,  
they all meet the government requirement for safe exposure.  
THIS MODEL PHONE MEETS THE GOVERNMENT’S  
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure to  
radiofrequency (RF) energy set by the Federal Communications  
Commission of the U.S. Government. These limits are part of com-  
prehensive guidelines and establish permitted levels of RF energy for  
the general population. The guidelines are based on standards that  
were developed by independent scientific organizations through peri-  
odic and thorough evaluation of scientific studies. The standards  
include a substantial safety margin designed to assure the safety of all  
persons, regardless of age and health.  
The FCC has granted an Equipment Authorization for this model  
phone with all reported SAR levels evaluated as in compliance with  
the FCC RF exposure guidelines. SAR information on this model  
phone is on file with the FCC and can be found under the Display  
ID PP4TX-60B.  
Additional information on Specific Absorption Rates (SAR) can be  
found on the Cellular Telecommunications & Internet Association  
The exposure standard for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate, or SAR. The  
SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted  
with the phone transmitting at its highest certified power level in all  
tested frequency bands. Although the SAR is determined at the high-  
est certified power level, the actual SAR level of the phone while oper-  
ating can be well below the maximum value. This is because the  
phone is designed to operate at multiple power levels so as to use only  
the power required to reach the network. In general, the closer you are  
to a wireless base station antenna, the lower the power output.  
* In the United States and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of  
tissue. The standard incorporates a substantial margin of safety to give  
additional protection for the public and to account for any variations in  
measurements.  
Before a phone model is available for sale to the public, it must be test-  
ed and certified to the FCC that it does not exceed the limit established  
by the government-adopted requirement for safe exposure. The tests  
are performed in positions and locations (e.g., at the ear and worn on  
the body) as required by the FCC for each model. The highest SAR  
value for this model phone when tested for use at the ear is 1.15 W/kg  
and when worn on the body,  
Page 136 - Chapter 11  
Chapter 11 - Page 137  
8410altel 2003.12.12 12:26 AM Page 140  
U.S. Food and Drug Administration -  
Center for Devices and Radiological Health  
Consumer Update on Mobile Phones  
• Design wireless phones in a way that minimizes any RF expo  
sure to the user that is not necessary for device function; and  
• Cooperate in providing users of wireless phones with the best  
possible information on possible effects of wireless phone use  
on human health.  
1. Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe. Wireless  
phones emit low levels of radiofrequency energy (RF) in the  
microwave range while being used. They also emit very low levels  
of RF when in the standby mode. Whereas high levels of RF can  
produce health effects (by heating tissue), exposure to low level RF  
that does not produce heating effects causes no known adverse  
health effects. Many studies of low level RF exposures have not  
found any biological effects. Some studies have suggested that  
some biological effects may occur, but such findings have not been  
confirmed by additional research. In some cases, other  
researchers have had difficulty in reproducing those studies, or in  
determining the reasons for inconsistent results.  
FDA belongs to an interagency working group of the federal agen-  
cies that have responsibility for different aspects of RF safety to  
ensure coordinated efforts at the federal level. The following agen-  
cies belong to this working group:  
• National Institute for Occupational Safety and Health  
• Environmental Protection Agency  
• Federal Communications Commission  
• Occupational Safety and Health Administration  
• National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the  
Federal Communications Commission (FCC). All phones that are  
sold in the United States must comply with FCC safety guidelines  
that limit RF exposure. FCC relies on FDA and other health agen-  
cies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone net-  
works rely upon. While these base stations operate at higher  
power than do the wireless phones themselves, the RF exposures  
that people get from these base stations are typically thousands of  
times lower than those they can get from wireless phones. Base  
stations are thus not the subject of the safety questions discussed  
in this document.  
2. What is FDA’s role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-emitting  
consumer products such as wireless phones before they can be  
sold, as it does with new drugs or medical devices. However, the  
agency has authority to take action if wireless phones are shown  
to emit radiofrequency energy (RF) at a level that is hazardous to  
the user. In such a case, FDA could require the manufacturers of  
wireless phones to notify users of the health hazard and to repair,  
replace or recall the phones so that the hazard no longer exists.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a num-  
ber of steps, including the following:  
3. What kinds of phones are the subject of this update?  
The term “wireless phone” refers here to handheld wireless  
phones with built-in antennas, often called “cell,” “mobile,” or “PCS”  
phones. These types of wireless phones can expose the user to  
measurable radiofrequency energy (RF) because of the short dis-  
tance between the phone and the user’s head. These RF expo-  
sures are limited by Federal Communications Commission safety  
• Support needed research into possible biological effects of RF  
of the type emitted by wireless phones;  
Page 138 - Chapter 11  
Chapter 11 - Page 139  
8410altel 2003.12.12 12:26 AM Page 142  
guidelines that were developed with the advice of FDA and other  
federal health and safety agencies. When the phone is located at  
greater distances from the user, the exposure to RF is drastically  
lower because a person’s RF exposure decreases rapidly with  
increasing distance from the source. The so-called “cordless  
phones,” which have a base unit connected to the telephone wiring  
in a house, typically operate at far lower power levels, and thus pro-  
duce RF exposures far below the FCC safety limits.  
5. What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of  
people actually using wireless phones would provide some of the  
data that are needed. Lifetime animal exposure studies could be  
completed in a few years. However, very large numbers of animals  
would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is  
directly applicable to human populations, but 10 or more years’ fol-  
low-up may be needed to provide answers about some health  
effects, such as cancer. This is because the interval between the  
time of exposure to a cancer-causing agent and the time tumors  
develop - if they do - may be many, many years. The interpretation  
of epidemiological studies is hampered by difficulties in measuring  
actual RF exposure during day-to-day use of wireless phones.  
Many factors affect this measurement, such as the angle at which  
the phone is held, or which model of phone is used.  
4. What are the results of the research done already?  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research methods.  
Animal experiments investigating the effects of radiofrequency  
energy (RF) exposures characteristic of wireless phones have  
yielded conflicting results that often cannot be repeated in other  
laboratories. A few animal studies, however, have suggested that  
low levels of RF could accelerate the development of cancer in  
laboratory animals. However, many of the studies that showed  
increased tumor development used animals that had been geneti-  
cally engineered or treated with cancer-causing chemicals so as to  
be predisposed to develop cancer in the absence of RF exposure.  
Other studies exposed the animals to RF for up to 22 hours per  
day. These conditions are not similar to the conditions under which  
people use wireless phones, so we don’t know with certainty what  
the results of such studies mean for human health.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any pos-  
sible association between the use of wireless phones and primary  
brain cancer, glioma, meningioma, or acoustic neuroma, tumors of  
the brain or salivary gland, leukemia, or other cancers. None of the  
studies demonstrated the existence of any harmful health effects  
from wireless phone RF exposures. However, none of the studies  
can answer questions about long-term exposures, since the aver-  
age period of phone use in these studies was around three years.  
6. What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDAis working with the U.S. National Toxicology Program and with  
groups of investigators around the world to ensure that high priori-  
ty animal studies are conducted to address important questions  
about the effects of exposure to radiofrequency energy (RF).  
FDA has been a leading participant in the World Health  
Organization International Electromagnetic Fields (EMF) Project  
since its inception in 1996. An influential result of this work has  
been the development of a detailed agenda of research needs that  
has driven the establishment of new research programs around  
the world. The Project has also helped develop a series of public  
information documents on EMF issues.  
FDA and the Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety.  
FDA provides the scientific oversight, obtaining input from experts  
in government, industry, and academic organizations. CTIA-fund-  
ed research is conducted through contracts to independent inves-  
tigators.  
Page 140 - Chapter 11  
Chapter 11 - Page 141  
8410altel 2003.12.12 12:26 AM Page 144  
The initial research will include both laboratory studies and studies  
of wireless phone users. The CRADA will also include a broad  
assessment of additional research needs in the context of the lat-  
est research developments around the world.  
methodology for measuring the rate at which RF is deposited in  
the heads of wireless phone users. The test method uses a tissue-  
simulating model of the human head. Standardized SAR test  
methodology is expected to greatly improve the consistency of  
measurements made at different laboratories on the same phone.  
SAR is the measurement of the amount of energy absorbed in tis-  
sue, either by the whole body or a small part of the body. It is meas-  
ured in watts/kg (or milliwatts/g) of matter. This measurement is  
used to determine whether a wireless phone complies with safety  
guidelines.  
7. How can I find out how much radiofrequency energy  
exposure I can get by using my wireless phone?  
All phones sold in the United States must comply with Federal  
Communications Commission (FCC) guidelines that limit radiofre-  
quency energy (RF) exposures. FCC established these guidelines  
in consultation with FDA and the other federal health and safety  
agencies. The FCC limit for RF exposure from wireless telephones  
is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram  
(1.6 W/kg). The FCC limit is consistent with the safety standards  
developed by the Institute of Electrical and Electronic Engineering  
(IEEE) and the National Council on Radiation Protection and  
Measurement. The exposure limit takes into consideration the  
body’s ability to remove heat from the tissues that absorb energy  
from the wireless phone and is set well below levels known to have  
effects.  
9. What steps can I take to reduce my exposure to  
radiofrequency energy from my wireless phone?  
If there is a risk from these products—and at this point we do not  
know that there is—it is probably very small. But if you are con-  
cerned about avoiding even potential risks, you can take a few sim-  
ple steps to minimize your exposure to radiofrequency energy  
(RF). Since time is a key factor in how much exposure a person  
receives, reducing the amount of time spent using a wireless  
phone will reduce RF exposure.  
• If you must conduct extended conversations by wireless phone  
every day, you could place more distance between your body and  
the source of the RF, since the exposure level drops off dramati-  
cally with distance. For example, you could use a headset and  
carry the wireless phone away from your body or use a wireless  
phone connected to a remote antenna.  
Manufacturers of wireless phones must report the RF exposure  
level for each model of phone to the FCC. The FCC website  
FCC identification number on your phone so you can find your  
phone’s RF exposure level in the online listing.  
Again, the scientific data do not demonstrate that wireless phones  
are harmful. But if you are concerned about the RF exposure from  
these products, you can use measures like those described above  
to reduce your RF exposure from wireless phone use.  
8. What has FDA done to measure the radiofrequency  
energy coming from wireless phones ?  
The Institute of Electrical and Electronic Engineers (IEEE) is devel-  
oping a technical standard for measuring the radiofrequency ener-  
gy (RF) exposure from wireless phones and other wireless hand-  
sets with the participation and leadership of FDA scientists and  
engineers. The standard, “Recommended Practice for  
Determining the Spatial-Peak Specific Absorption Rate (SAR) in  
the Human Body Due to Wireless Communications Devices:  
Experimental Techniques,” sets forth the first consistent test  
10. What about children using wireless phones?  
The scientific evidence does not show a danger to users of wire-  
less phones, including children and teenagers. If you want to take  
steps to lower exposure to radiofrequency energy (RF), the meas-  
ures described above would apply to children and teenagers using  
wireless phones. Reducing the time of wireless phone use and  
Page 142 - Chapter 11  
Chapter 11 - Page 143  
8410altel 2003.12.12 12:26 AM Page 146  
increasing the distance between the user and the RF source will  
reduce RF exposure. Some groups sponsored by other national  
governments have advised that children be discouraged from  
using wireless phones at all. For example, the government in the  
United Kingdom distributed leaflets containing such a recommen-  
dation in December 2000. They noted that no evidence exists that  
using a wireless phone causes brain tumors or other ill effects.  
Their recommendation to limit wireless phone use by children was  
strictly precautionary; it was not based on scientific evidence that  
any health hazard exists.  
12. Where can I find additional information?  
For additional information, please refer to the following resources:  
- FDA web page on wireless phones:  
(http://www.fda.gov/cdrh/phones/index.html)  
- Federal Communications Commission (FCC) RF Safety  
Program: (http://www.fcc.gov/oet/rfsafety)  
- International Commission on Non-Ionizing Radiation Protection:  
(http://www.icnirp.de)  
11. What about wireless phone interference with medical  
equipment?  
- World Health Organization (WHO) International EMF Project:  
(http://www.who.int/emf)  
Radiofrequency energy (RF) from wireless phones can interact  
with some electronic devices. For this reason, FDA helped devel-  
op a detailed test method to measure electromagnetic interference  
(EMI) of implanted cardiac pacemakers and defibrillators from  
wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical  
instrumentation (AAMI). The final draft, a joint effort by FDA, med-  
ical device manufacturers, and many other groups, was complet-  
ed in late 2000. This standard will allow manufacturers to ensure  
that cardiac pacemakers and defibrillators are safe from wireless  
phone EMI.  
- National Radiological Protection Board (UK):  
(http://www.nrpb.org.uk/)  
FDA has tested hearing aids for interference from handheld wire-  
less phones and helped develop a voluntary standard sponsored  
by the Institute of Electrical and Electronic Engineers (IEEE). This  
standard specifies test methods and performance requirements for  
hearing aids and wireless phones so that that no interference  
occurs when a person uses a “compatible” phone and a “compat-  
ible” hearing aid at the same time. This standard was approved by  
the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful interfer-  
ence be found to occur, FDA will conduct testing to assess the  
interference and work to resolve the problem.  
Page 144 - Chapter 11  
Chapter 11 - Page 145  
8410altel 2003.12.12 12:26 AM Page 148  
MEMO  
Chapter 12  
WARRANTY  
Protect Your Warranty  
12 Month Limited Warranty  
Chapter 12 - Page 147  
Page 146 - Chapter 11  
8410altel 2003.12.12 12:26 AM Page 150  
PROTECT YOUR WARRANTY  
12 MONTH LIMITED WARRANTY  
AUDIOVOX COMMUNICATIONS CORP. (the Company)  
warrants to the original retail purchaser of this Audiovox  
Handheld Portable Cellular Telephone, that should this product  
or any part thereof during normal consumer usage and  
conditions, be proven defective in material or workmanship  
that results in product failure within the first twelve (12) month  
period from the date of purchase, such defect(s) will be  
repaired or replaced (with new or rebuilt parts) at the  
Company’s option, without charge for parts or labor directly  
related to the defect(s).  
Read your Warranty carefully, with the special consideration  
to paragraph seven of the Limited Warranty for your unit.  
“Warranty does not apply to... or to any product or part  
thereof which has suffered through alteration...  
mishandling, misuse, neglect or accident”.  
Many companies are making look alike accessories and  
in some cases, promoting that their product is equal to  
or better than the Audiovox product. Be careful. Some of  
these products may not be compatible to use with your  
Audiovox product and may damage the unit or cause it  
to malfunction. If service is required on your unit and it is  
determined that a non-Audiovox accessory has created  
the problem with your unit, the Warranty will not apply. In  
addition, if the unit has already suffered irreversible  
damage by reason of a non-compatible accessory, the  
Warranty will be voided. To protect your Warranty, use  
only compatible accessories which cannot damage or  
interfere with the functioning of your Audiovox product.  
The antenna, keypad, display, rechargeable battery and battery  
charger, if included, are similarly warranted for twelve (12)  
months from date of purchase.  
This Warranty extends only to consumers who purchase the  
product in the United States or Canada and it is not assignable  
or transferable.  
This Warranty does not apply to:  
(a) Product subjected to abnormal use or conditions, accident,  
mishandling, neglect, unauthorized alteration, misuse,  
improper installation or repair or improper storage;  
(b) Product whose mechanical serial number or electronic serial  
number has been removed, altered or defaced.  
(c) Damage from exposure to moisture, humidity, excessive  
temperatures or extreme environmental conditions;  
AUDIOVOX COMMUNICATIONS CORP.  
555 Wireless Blvd., Hauppauge, New York 11788, 800-229-1235  
16808 Marquardt Avenue, Cerritos, California 90703, 562-802-5100  
(d) Damage resulting from connection to, or use of any accessory  
or other product not approved or authorized by the  
Company;  
AUDIOVOX COMMUNICATIONS CANADA CO.  
5155 Spectrum Way, Unit #5, Mississauga, Ontario  
Canada L4W 5A1, 800-465-9672  
Page 148 - Chapter 12  
Chapter 12 - Page 149  
8410altel 2003.12.12 12:26 AM Page 152  
12 MONTH LIMITED WARRANTY  
12 MONTH LIMITED WARRANTY  
(e) Defects in appearance, cosmetic, decorative or structural  
items such as framing and non-operative parts;  
WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL  
PURCHASE. IN NO CASE SHALL THE COMPANY BE  
LIABLE FOR ANY SPECIAL CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR ANY OTHER  
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. THE  
COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN  
RENDERING SERVICE UNDER THIS WARRANTY OR LOSS  
OF USE DURING THE TIME THE PRODUCT IS BEING  
REPAIRED OR REPLACED.  
(f) Product damaged from external causes such as fire, flooding,  
dirt, sand, weather conditions, battery leakage, blown fuse,  
theft or improper usage of any electrical source.  
The Company disclaims liability for removal or reinstallation of  
the product, for geographic coverage, for inadequate signal  
reception by the antenna or for communications range or  
operation of the Cellular System as a whole.  
No person or representative is authorized to assume for the  
Company any liability other than expressed herein in connection  
with the sale of this product.  
To obtain repairs or replacement within the terms of this  
Warranty, the product should be delivered with proof of  
Warranty coverage (e.g. dated bill of sale), the consumer’s  
return address, daytime phone number and/or fax number and  
complete description of the problem, transportation prepaid, to  
the Company at the address shown below or to the place or  
purchase for repair or replacement processing. In addition, for  
reference to an authorized Warranty station in your area, you  
can telephone in the United States (800) 229-1235, and in  
Canada (800) 465-9672 (in Ontario call 905-712-9299).  
Some states or provinces do not allow limitations on how long  
an implied warranty lasts or the exclusion or limitation of incidental  
or consequential damage, so the above limitation or exclusions  
may not apply to you. This Warranty gives you specific legal  
rights, and you may also have other rights which vary from  
state to state or province to province.  
IN U.S.A.:  
Audiovox Communications Corp.  
555 Wireless Blvd.  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS  
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE  
COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE  
PAID BY PURCHASER FOR THE PRODUCT.  
Hauppauge, NY 11788  
(800) 229-1235  
IN CANADA:  
Audiovox Communications Canada Co.  
5155 Spectrum Way, Unit #5  
Mississauga, Ontario L4W 5A1  
(800) 465-9672  
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE SHALL BE LIMITED TO THE  
DURATION OF THIS WRITTEN WARRANTY. ANY ACTION  
FOR BREACH OF ANY WARRANTY MUST BE BROUGHT  
Page 150 - Chapter 12  
Chapter 12 - Page 151  

Macally Computer Drive PHR S250UAB User Manual
Lenovo THINKCENTRE 8176 User Manual
Fujitsu MPF3XXXAH User Manual
Edirol UM 1EX User Manual
Ecom Instruments Ex GSM 01 User Manual
Craftsman 247776360 User Manual
Canon CHIP RESETTERS PGI 5 User Manual
Black &amp; Decker DE43 User Manual
Alpine CDA 9827 User Manual
Addonics Technologies IDE CF AEUDMACF User Manual