INSTALLATION INSTRUCTIONS
#300-765 Airaid Jr. Kit #300-965 Airaid MIT
2005-07 Dodge Dakota 4.7L V-8
2006-07 Mitsubishi Raider 4.7L V-8
Thank you for purchasing the Airaid Intake System. Please read the instruction manual carefully before
proceeding with the installation. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for
questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully
inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts are
missing, contact Airaid. The air filter element is protected from direct exposure to water and debris; care should
be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILTY! The
air filter is reusable and should be cleaned using the Airaid Filter Tune-Up Kit periodically.
Thank you for selecting Airaid.
Packing List:
Tools Required for this Installation:
Flat Head Screwdriver or
5/16” Socket & Ratchet
850-175
KIT965T
KITRDCR01
KITHUMPHS02
KIT765HP
KITHS48
Airaid Premium Filter
1
1
1
1
1
1
1
2
1
Modular Intake Tube
Silicone Reducer Hose
Urethane Hump Hose
Hardware & Instructions
#48 Hose Clamp
#52 Hose Clamp
#60 Hose Clamp
Grommet
10mm Socket
KITHS52
KITHS60
KITGRMT03
10. Double check your work to be
certain that all nuts, bolts, and
clamps are securely fastened.
11. Reconnect the negative
battery cable.
Before
After!
Don’t Forget Your AIRAID
Filter Tune-Up Kit!
P/N 790-550
Instructions Revision
Date: 07/16/08
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
|