Dialog 4223 Professional
Digital Telephone for MD Evolution
User’s Guide
Table of Contents
Voice Mail Services .........................................64
Group Services ..............................................82
More Features of Your Extension ....................94
Programming Your Extension .......................105
Attendant-Based Services ............................117
Services Reserved for Attendants .................124
QSIG-MD Private Network Services .............143
Installing Your Extension ...............................147
Your Extension’s Accessories .......................152
Index ............................................................159
Quick Reference Guide ................................164
MD Evolution – Dialog 4223 Professional
3
Welcome
Welcome
Welcome to the User’s Guide for the Dialog 4223 Professional
telephone used with the MD Evolution communication system. This
includes the MD Evolution M, MD Evolution XL, MDE Mi and MDE
Xli models.
The features described in this guide relate to version R8.0A or later
of the MD Evolution communication system. Certain services may
not be available in older system versions and/or may be protected
by a software key.
This guide describes services for the MD Evolution communication
system as well as the digital Dialog 4223 Professional extension,
with normal default programming.
In terms of the service rights for your specific extension, there may
be some discrepancy in the manner in which your own phone will
operate. For more information, or if a problem arises, contact your
system administrator.
Unless otherwise indicated, features that do not involve using the
handset are described in the “handsfree” section. Pressing the “C”
key (for “Clear”), is the same as hanging up the handset.
The latest version of this user guide can be downloaded from:
http://www.aastra.com
Note: The Dialog 4223 Professional model is a telephone
system; it may only be used with a private branch exchange
that is compatible with this type of telephone.
5
MD Evolution – Dialog 4223 Professional
Welcome
Copyright
All rights reserved. No parts of this publication may be reproduced,
stored in retrieval systems, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or
otherwise, without prior written permission of the publisher except
in accordance with the following terms.
If this publication is made available on Aastra´s homepage, Aastra
gives its consent to downloading and printing copies of the content
provided in this file only for private use and not for redistribution. No
parts of this publication may be subject to alteration, modification
or commercial use. Aastra will not be liable for any damages arising
from use of an illegal modified or altered publication.
Aastra is a registered trademark of Aastra Technologies Limited. All
other trademarks mentioned herein are the property of their
respective owners.
Warranty
AASTRA MAKES NO WARRANTY OF ANY KIND WITH REGARD
TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Aastra shall not be liable for
errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance or use of
this material.
Declaration of Conformity
Hereby, Aastra Telecom Sweden AB, SE-126 37 Hägersten,
declares that this telephone is in conformity with the essential
requirements and other relevant provisions of the R&TTE
directive 1999/5/EC.
6
MD Evolution – Dialog 4223 Professional
Important User Information
Important User Information
Safety instructions
Save these instructions.
Read these safety instructions before use!
Note: When using your telephone or connected equipment,
the following basic safety precautions should always be
followed to reduce risk of fire, electrical shock and other
personal injury.
•
•
Follow instructions in the equipment’s user guide or other documentation.
Always install equipment in a location and environment for which it is
designed.
•
For mains powered telephones: Only operate with the mains power voltage
indicated. If you are uncertain of the type of power supplied to the building,
consult property management or your local power company.
•
For mains powered telephones: Avoid placing the telephone’s power
cable where it can be exposed to mechanical pressure as this may
damage the cable. If the power supply cord or plug is damaged,
disconnect the product and contact qualified service personnel.
Headsets used with this equipment must comply with EN/IEC 60950-1
and for Australia AS/NZS 60950:1-2003.
Do not make any changes or modifications to equipment without seeking
approval from the party responsible for compliance. Unauthorized changes
or modifications could void the user’s authority to operate the equipment.
•
•
•
•
Do not use the telephone to report a gas leak in the vicinity of the leak.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, and kitchen sink, in a wet
basement or near a swimming pool.
•
•
•
Do not insert any object into equipment slots that is not part of the product
or auxiliary product.
Do not disassemble the product. Contact a qualified service agency when
service or repair work is required.
Do not use a telephone (other than cordless type) during an electrical storm.
Disposal of the product
Your product should not be placed in municipal waste. Please check local
regulations for disposal of electronic products.
7
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
Introduction to Your Extension
Dialog 4223 Extension Features
1
2
Display
Your extension features a screen with three 40-character lines. See
also the “Display Information” section.
Dynamic Function Keys
Dynamic functions are services that are accessible depending on
the status of your calls. The corresponding text labels are displayed
on the last line of the extension’s display. They are selected by
pressing the corresponding dynamic function key.
See also the “Display Information” section.
8
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
>>
3
4
>> or Next Key
This fixed function key allows you to scroll through the dynamic
functions displayed 4 at a time on the last line of your extension’s
screen. When there are more than 4 services available, the < and >
signs are displayed at each end of this same line.
Menu
Menu Key
This fixed function key enables you to access various services while
programming your extension, such as call forwarding or the use of
these line keys.
See also the “Programming Your Extension” section.
Call-Fwd
5
Call-Fwd Key
This fixed function key enables you to activate variable call for-
warding that was pre-defined on your extension. It also enables
you to deactivate or cancel any type of active call forwarding on
your extension, pre-defined or defined on a case by case basis.
Transfer
6
7
Transfer Key
This fixed function key transfers a call on your extension between
two online calling parties.
See also the “Operations during a Call” section.
Ô
Your extension features at least six line keys that enable you to
process up to six incoming and outgoing calls simultaneously. Four
of these keys may be customised for making specific internal or
external calls, or for direct access to certain services.
See also the “Programming Your Extension” section.
É
Â
8
Mute Key
This key activates or deactivates the microphone on your extension
when you are operating in handsfree mode or the voice transmission
feature when you are operating in handset mode. It also controls
your extension’s silent ringing function.
See also the “Operations for Incoming Calls”, and “Operations
during a Call” sections.
9
Loudspeaker Key
This key activates or deactivates your extension’s loudspeaker. In
handset calling mode, it enables you to activate the loudspeaker.
Pressing this key also allows you to toggle between the handset
and handsfree modes. When an incoming call is ringing, pressing
these keys successively will adjust your extension’s ring melody.
See also the “Operations during a Call” section.
9
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
Í
10
11
Headset Key
Pressing this key toggles between the handset calling mode and
headset operation. There is a headset jack on the underside of your
extension.
ì
í
Volume Control Keys
During a call, these two keys control the listening volume on your
loudspeaker or handset. When an incoming call is ringing, these
keys also control the ring volume for your extension.
See also the “Operations during a Call” and “Programming Your
Extension” sections.
12
“C” Key (Clear or Erase)
This key disconnects an incoming or outgoing call executed in
handsfree mode. It also enables you to exit your extension’s
programming mode.
See also the “Operations for Incoming Calls”, “Operations for
Outgoing Calls”, and the “Programming Your Extension” sections.
13
14
Location of the Microphone
Location of the Loudspeaker
Your extension has a microphone and a loudspeaker for the hands-
free or speakerphone calling modes.
15
16
Handset
This also features a speakerphone function.
Satellite or Add-on Key Panel
Your extension may be equipped with (a) satellite(s), each featuring
17 programmable repertory keys. From one to four additional panels
may be connected to your extension.
See also the “Your Extension’s Accessories” section.
10
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
Extension LEDs
Most of your telephone’s fixed function keys, and line keys feature
an LED.
This is also true of the repertory keys on any additional satellite
panels that may be associated with your extension.
Each LED indicates the status of a current call or the status of the
service associated with the corresponding function key.
Status
Meaning
No call is processed on the line key,
or the service associated with the
function is inactive.
Off
Ô
ÕÔ
There is a call on the line key, or the
service associated with the function
is active. For the Call-fwd key, this
indicates that the extension’s pre-
defined variable call forwarding for
this key is active.
On
A call is ringing on the line key. For
the Call-fwd key, it indicates that a
variable call forwarding for the exten-
sion, programmed on a case by
case basis, is currently active.
Slowly flashing
Quickly flashing
ÖÔ
ÖÔ
A call is holding on the line key.
11
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
Display Information
The step-by-step instructions displayed on your extension’s screen
explain how to use your telephone.
When your extension is inactive, the date and time are displayed on
the screen’s uppermost line. The middle line displays the number
of parties who tried to contact you, and when applicable, your
extension number. The bottom line indicates the services that are
accessible through the dynamic function keys.
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
With an internal call, the called party’s name and extension number
are displayed on the screen’s uppermost line. The status is
displayed on the middle line. For an external call, the called party’s
number and possibly name are also displayed on the screen’s
uppermost line.
L1 SMITH Peter-405
FREE
DTMF
VPAGING
CALL_BACK FLASH
>
During a call, the date and time are re-displayed on the screen’s
uppermost line. Your party’s name and number, as well as the
duration (and cost) of the call are displayed on the middle line.
FRI 20-APR 15:28
L1 SMITH Peter-405
DTMF
01:33
INFO_COMM CALL_PARK >
When you receive a call, the screen’s uppermost line displays the
caller’s name and number (under the condition that it is connected
to an ISDN-type network for an external caller).
L1 SMITH Peter-405
REDIAL
CALLERS
PICKUP
NAME
>
When an internal call is placed from your extension, the screen
displays the status of the called party as one of the following:
FREE
RING
WAIT
The party you are calling is free.
The party you are calling is already being rung by a third party.
The party you are calling is busy, but your call may be placed on
camp-on (multi-line extension).
BUSY
The party you are calling is busy, and it is not possible to place your
call on camp-on (single-line extension).
12
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
CONGESTED
The line you are calling is congested, therefore it is not possible to
place your call on camp-on.
Invalid number
End of call
The number dialled is invalid.
The party you called has ended this call.
When a service is either activated or deactivated, the system’s
acceptance or refusal is also displayed on the screen:
CALL FWD … ACCEPTED
CANCEL ACCEPTED …
Accepted service
Your call forward programming has been accepted.
Your call forward cancellation has been accepted.
The request for service has been accepted.
The request for service has been denied.
Denied service
FRI 20-APR 15:28
4 Callers
REDIAL
CS WM
PICKUP
GC
lock
Station 420
CALLERS
NAME
>
When the extension is idle, the screen also displays the information
relating to the activation of certain services:
C
S
If your extension is part of a group (primary), this indicates that the
group is currently closed and is not accepting any incoming calls.
If your extension is part of a group (primary), this indicates that you
are on stand-by with the group. Your extension will only receive
your personal calls.
WM
GC
Indicates that you have an unread message in the mailbox associated
with your extension, as applicable.
Indicates that your extension is in general calls acceptance mode,
and serves as an auxiliary attendant extension.
lock
Indicates that your extension is currently locked. It cannot be used
until it has been unlocked.
13
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
Tones, Voice Announcements, and Ring
Tones
Over and above visual information displayed on your extension’s
screen and LEDs, there are also various tones, voice announcements
and ring tones that signal the status of your extension, or certain
associated services.
The tones heard are applied under the following conditions and
with the following timing and frequency:
Internal dial tone
•
Heard each time the handset is picked up from your
extension (excluding all activated special services).
330 Hz
Heard when a network prefix or an external call is dialled.
424 Hz Continuous
Heard when you call an extension that is free.
1,5 sec. On/3,5 sec. Off
Heard when you call an extension that is busy and your call
has been placed on automatic camp-on, or when your call is
placed on-hold by a third party set.
Continuous
External dial tone
Ringback tone
•
•
•
Call on-hold or call
camp-on tone
424 Hz
2 consec. beeps, rep. every 5 sec.
Busy tone
•
Heard when you call an extension that is busy, but automatic
camp-on is not possible for your call, or when a service
request on your extension is refused.
424 Hz
0,5 sec. On/0,5 sec. Off
Call waiting presentation
tone
•
•
Heard when you receive a new call, when your extension is
already busy.
424 Hz
Only 1 ring signal, not repeated
Special dial tone
Heard each time your extension’s handset is picked up, when
there is a call forwarded active for your extension, or when it
is the recipient of a call forward for a third party set (apart
from other special activated services).
424+330 Hz
0,75 sec. On/0,75 sec. Off
Re-routing on call forward
Intrusion or call offer tone
Service Acceptance tone
•
•
•
Heard when you call an extension that has a call forward that
is active, when the call forward is executed.
424 Hz
0,05 sec. On/0,05 sec. Off
Heard when a third party – typically an attendant – intervenes
during your current call.
424 Hz
2 consec. beeps, rep. every 1,4 sec.
Heard when a request for service is accepted on your
extension.
Melody
Multi-toned melody – continuous.
14
MD Evolution – Dialog 4223 Professional
Introduction to Your Extension
The voice announcements (or voice guides) are normally provided
under the following conditions:
Notification of a new
voice message
•
Provided each time your extension is picked up, this
message indicates that a new message was left in the
mailbox associated with your extension, when applicable.
See the “Voice Mail Services” section.
Message: “A message has been deposited in your voice
mailbox”.
Locked extension
notification
•
Heard each time your handset is lifted, this announcement
reminds you that your extension is locked. It is therefore
Your Extension” section.
Message: “Your set has been locked. To make a call, you
must unlock it”.
Appointment reminder
notification
•
•
Heard following your response to an appointment reminder
call, this announcement indicates the nature of this automatic
section.
Message: “It’s time for your appointment.”
Notification of the ex-
tension’s general calls
acceptance status.
Heard each time your extension is picked up, this message
reminds you that your extension is in general calls acceptance
mode, and serves as an auxiliary attendant extension. See
the “Attendant-Based Services” section.
Message: “Your extension is receiving external calls of the
attendants”.
Your extension also offers a selection of 10 different ring melodies
and 10 different ring volume levels. See the “Programming Your
Extension” section.
This ring is distinctly cadenced, according to whether the incoming
call is an internal or external call. The cadence is faster for an
internal call.
Note: Your facility also usually provides integrated on-hold
music, to which every external calling party either placed on
hold or parked will be connected.
15
MD Evolution – Dialog 4223 Professional
Operations for Incoming Calls
Operations for Incoming Calls
Receiving an Internal Call
You are informed that there is internal incoming call by the internal
ring signal for your extension, and the flashing LED associated with
the line on which the call is presented.
The name and number of the internal caller are displayed on the
screen.
L1 SMITH Peter-405
REDIAL
CALLERS
PICKUP
NAME
Receiving an External Call
You are informed that there is external incoming call by the external
ring signal for your extension, and the flashing LED associated with
the line on which the call is presented.
If your calling party is an ISDN network (or the equivalent) user, his/
her external calling number is displayed on the screen. His/her
name may also be displayed if this calling party may be contacted
through abbreviated dialling (speed dialling) from your facility.
The screen also indicates whether this call was received directly on
your DID number (it says “DIRECT”), or if it was transferred from
another extension (it says “TRANSF FROM…”).
L1 Aastra-00164477500
DIRECT
REDIAL
CALLERS
PICKUP
NAME
>
16
MD Evolution – Dialog 4223 Professional
Operations for Incoming Calls
Answering a Call
To take an incoming call:
u
Lift the handset.
You may now communicate with the caller through your
extension’s handset.
Or, for handsfree mode:
L1
ÖÔ
Press the line key where the call is presented, without lifting
the handset.
You may now communicate with the caller through your
extension’s loudspeaker and microphone.
FRI 20-APR 15:28
L1 SMITH Peter-405
DTMF
01:33
INFO_COMM CALL_PARK
>
Ending a Call
To end a call:
d
í
Replace the handset.
Your extension returns to idle status.
Or, for handsfree mode:
Press the “C” key to end the call in handsfree mode.
Your extension returns to idle status.
Answering a Second Call
When you have an ongoing call, you may also receive a new call on
one of the other line keys available on your extension that has not
been programmed for a specific internal or external number, or
access to a specific service.
You are informed by a single signal and the flashing line key on
which the new call is presented.
17
MD Evolution – Dialog 4223 Professional
Operations for Incoming Calls
When a new call comes in, the identity of your new calling party will
also be displayed on the first line of your extension’s screen,
instead of the date and time.
L2 Aastra-00164477500
L1 SMITH Peter-405
DTMF
01:35
INFO_COMM CALL_PARK
>
To answer this new call:
L2
L1
ÖÔ
ÖÔ
í
Press the flashing line key.
Your first caller’s call is automatically placed on hold.
Next, to return to your first caller:
Press the first line key that is flashing.
The second call is placed on hold. You are now connected to your
initial caller.
Or, press the “C” key if you wish to end the second call.
Your extension is re-rung by the first call placed on hold.
Consulting a New Call
If a new call is presented to you when you already have two parties
on your extension’s lines, this new call will not be automatically
identified, as indicated above.
You may, however, discover this new party’s identity. To do so:
Menu
Press the Menu key.
L3
ÖÔ
Press the flashing line key on which the new call is presented.
The new party’s identity is briefly displayed; you may then decide
whether or not to answer this call, in the aforementioned manner.
This procedure is also applicable for consulting the identity of a
party who is on hold.
18
MD Evolution – Dialog 4223 Professional
Operations for Incoming Calls
Call Pick-Up
When your extension is idle, you may also answer a call that is
ringing for another extension, without having to change extensions.
To do this, after lifting the handset or in handsfree mode:
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
PICKUP
Press the dynamic function key shown on the left.
FRI 20-APR 15:28
L1 Pick up _
GENERAL
MAIN_GRP
SEC_GRP
DEFLECT
STATION NO
z
Next, dial the extension number that is ringing.
You are now directly connected to the party calling the other
extension.
Call Pick-Up on Presentation
From your idle extension, when you want to pick up a call that is
ringing on another extension, you may also ask for an initial call
presentation that will indicate the calling party’s identity.
To do so, proceed in the following manner:
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
PICKUP
Press the dynamic function key shown on the left.
FRI 20-APR 15:28
L1 Pick up _
GENERAL
MAIN_GRP
SEC_GRP
DEFLECT
DEFLECT
Press the dynamic function key shown on the left.
19
MD Evolution – Dialog 4223 Professional
Operations for Incoming Calls
FRI 20-APR 15:28
L1 Deflection _
GENERAL
MAIN_GRP
SEC_GRP
STATION NO
z
Next, dial the extension number that is ringing.
The information concerning the call that you are picking up is
presented to you, and the call begins to ring on your extension.
L1 Aastra-00164477500
REDIAL
CALLERS
PICKUP
NAME
>
L1
ÖÔ
Press the flashing line key corresponding to pick up the call.
You are now directly connected to the party calling the other exten-
sion.
Notes:
Rather than dialling the number of the extension to pick-up,
you may also press the line or repertory key on which this
number may have been saved.
Certain extensions (such as yours) may possibly be equipped
with permanent protection against call pick-up and deflection
services. If this is the case, these services will obviously be
refused on these extensions (and vice-versa).
Silent Ringing Function
This function may be used when you wish to not be disturbed by the
ringing of the telephone. When it is activated only your extension’s
screen display and the flashing of a line key will advise you of a new
incoming call.
To activate this function from an idle extension:
É
Press this key to activate silent ringing for incoming calls.
The associated LED will remain lit to remind you that this function is
activated.
20
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Operations for Outgoing Calls
Manually Dialling a Call
The first way to place internal and external calls is to manually dial
the number to be called. To do so:
u
Lift the handset.
Then, for an internal call:
STATION NO
z
z
z
Dial the internal extension number to contact.
Or, to call the attendants:
9
Dial the number 9 (generally).
Or, for an external call:
0 + EXT. NO
Dial the ad-hoc network access prefix, followed by the number
for the external party to be reached.
You can then follow the placing of your call on the handset and on
your extension’s screen where your called party’s identity is
displayed.
Or, for handsfree mode:
NO TO CALL
z
Directly dial the number for the internal or external party to
contact, without lifting the handset.
You can then follow the placing of your call on the loudspeaker and
on your extension’s screen.
L1 SMITH Peter-405
FREE
DTMF
VPAGING
CALL_BACK FLASH
>
Note: The prefix to dial for external calls is generally “0” to
access the public network. Accessing a private network
depends on your facility’s configuration.
21
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Calling with Abbreviated Dialling
(Speed Dialling)
You may also place your external calls more quickly by using the
abbreviated dialling (speed dialling) service.
This enables you to contact your external parties using shorter
numbers than the norm, usually just 3 or 4 digits.
Usually, you will have access to a general list of abbreviated
numbers valid for all users in your facility.
Additionally, based on your user rights, you may also have access
to a personal list of 20 abbreviated numbers that are either personal,
or shared among a restricted group of users.
All of these abbreviated numbers are managed by your system
administrator or possibly your facility’s attendants. Contact them
as needed.
To contact an external party using abbreviated numbers, after lifting
the handset or in handsfree mode:
2
z
z
Dial “2”, giving you access to abbreviated dialling.
ABBR. NO
Then directly dial the abbreviated number associated with
the external party to be contacted.
The call is then established just as if you had manually dialled the
external party’s number.
Notes:
A personal abbreviated number accepts values from 00 to 19.
An abbreviated number on the general list is usually from
200 to xxx. The prefix “2” is the one usually used to access
abbreviated dialling. It may, however, have been modified
by your system administrator.
An abbreviated number is generally complete. It may also
be incomplete, in which case you will need to complete the
number by dialling the rest manually. This may, for example,
allow you to access a series of numbers using just one
abbreviated number.
22
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Placing a Call Using Programmable Line
or Repertory Keys
Another option for quickly processing your outgoing calls to favoured
parties is to save their numbers under one of your extension’s pro-
on one or several associated satellite key panel(s), as the case may
dictate.
Your extension features 6 line keys, of which 4 keys may be pro-
grammed with an internal or external number for your favoured
parties, or with an activation code for a given service.
If your extension uses one or several associated satellite key panels,
each one offers an additional 17 programmable repertory keys that
can also save an internal number, and external number, or again, a
service activation code.
The corresponding programming of each line or repertory key is,
in this case, entirely up to you. See also the “Programming Your
Extension” section.
To contact an internal or external party whose number has been
saved on a line or repertory key, after lifting the handset, or in
handsfree mode:
L4
Ô
Simply press the line or repertory key associated with the
party to be contacted.
The call is then established just as if you had manually dialled the
internal or external party’s number.
Notes:
As with abbreviated dialling, a number saved on a line or
repertory key may be incomplete. In this case you will need
to complete the number by dialling the rest manually. In-
complete numbers could, for example, allow you to access
a series of numbers using just one key.
Note:Programming a line key assigns a saved number or
service to this key. Practically speaking, this means that you
may only program 4 line keys, thus reserving at least line
keys 1 and 2 for processing incoming and/or outgoing calls
simultaneously.
23
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Last External Number Redial
When you place an external call, the system automatically saves the
number dialled, enabling it to be automatically redialled, if necessary.
This is true whether or not your external call is successfully connected.
Moreover, the last number dialled is saved until a new external call
is placed.
If necessary, to redial the last external number dialled, after lifting
the handset or in handsfree mode:
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
REDIAL
Press the dynamic function key shown on the left.
The last external number dialled is automatically redialled, just as if
you had dialled it manually.
Other Options for Dialling Outgoing Calls
Your extension also offers two additional services to easily dial your
outgoing calls.
The first service is the Call by Name service. Your extension gives
you access to the directory integrated into your facility, which includes
all of the internal numbers in service as well as the external numbers
accessible through abbreviated dialling (speed dialling). You may
consult this directory and then directly call a party found therein,
simply by selecting his/her name.
The second service is the Call log file service. Your extension auto-
matically saves all of the call that you receive but do not answer.
You then have the option of automatically re-dialling each caller
whose identity has been saved in this file.
For these two services, see the “Directory, and Call List Services”
section.
24
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Monitoring Your Internal Calls and
Subsequent Services
When you establish an internal call, your extension displays your
party’s status as one of the following:
FREE
RING
WAIT
•
•
•
The party you are calling is free.
The party you are calling is already being rung by a third party.
The party you are calling is busy, but your call may be placed on
camp-on (multi-line extension).
BUSY
•
•
The party you are calling is busy, and it is not possible to place
your call on camp-on (single-line extension).
CONGESTED
The line you are calling is congested, therefore it is not possible
to place your call on camp-on.
If your party is free, his/her extension will be rung, while you hear
the ringback tone.
If your party is busy, your call may be automatically camped-on for
the dialled extension, and you will hear the automatic camp-on tone.
You may then simply wait for your party to answer.
To proceed with your call, in terms of the requested internal party’s
status, you may also:
•
•
•
Activate the automatic call-back feature for the called extension
that is busy, or not answering.
Broadcast a voice message on the free extension, if it is equipped
with a loudspeaker.
End your call by sending a mini-message to the called extension,
if it is compatible with this service. See the “Message Services”
section.
Depending on the rights assigned to your extension, you may also
carry out an intrusion upon the current call on the requested exten-
sion, or override their Do not disturb status. These last services are,
however, usually reserved for your system’s attendants. See the
“Attendant-Based Services” section.
25
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Automatic Call-Back on Busy Condition
When placing a call to an internal party whose extension is busy
and you would rather not wait, you may activate the automatic call-
back on busy condition for the called extension.
This if valid regardless of your called party’s status: “RING”, “WAIT”,
“BUSY” or “CONGESTED”.
To do so:
L1 SMITH Peter-405
WAIT
DTMF
CALL_BACK FLASH
>
CALL_BACK
Press the dynamic function key shown on the left.
d
or
í
Replace the handset or press the “C” key to end the call in
handsfree mode.
You will be automatically called back when your called party’s
conversation has ended.
Automatic callback
REDIAL
CALLERS
PICKUP
NAME
>
Then, once you have answered this call-back, your internal called
party will be automatically re-rung.
Note: An automatic call-back is typically valid for 15 minutes.
When this timeframe expires, if your called party is not free,
the service will be automatically cancelled. When you are
called back, you typically have 30 seconds to answer the
automatic call-back service. If you do not answer within that
timeframe, the automatic call-back is automatically cancelled.
26
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Automatic Call-Back on No-Answer
Condition
When placing a call to an internal party whose extension is “FREE”,
but your call remains unanswered, you may activate the automatic
call-back on no-answer condition for the called extension.
To do so:
L1 SMITH Peter-405
FREE
DTMF
VPAGING
CALL_BACK FLASH
>
CALL_BACK
Press the dynamic function key shown on the left.
d
or
í
Replace the handset or press the “C” key to end the call in
handsfree mode.
You will be automatically called back when your called party has
demonstrated his/her renewed presence, typically by placing a new
call from his/her extension.
Automatic callback
REDIAL
CALLERS
PICKUP
NAME
>
Then, once you have answered this call-back, your internal called
party will be automatically re-rung.
Notes:
An automatic call-back is typically valid for 15 minutes.
When this timeframe expires, if your called party has not
affirmed his/her presence, the service will be automatically
cancelled. When you are called back, you typically have
30 seconds to answer the automatic call-back service. If
you do not answer within that timeframe, the automatic call-
back is automatically cancelled.
With both services, you receive visible and audible confir-
mation that you have successfully registered the automatic
call-back on busy or no answer condition.
Your extension may also be subject to the automatic call-
back on busy or on no-answer service from third party sets.
27
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Voice Paging over a Free Extension’s
Loudspeaker
When you call an internal extension that is “FREE”, but does not
answer, you may broadcast a voice page on your called
extension’s loudspeaker.
This allows you to transmit a message on the extension’s loud-
speaker, which will be automatically activated when you request
this service.
The service is available when you attempt to contact an extension
that is equipped with a loudspeaker. Otherwise, the service will be
refused, and the call will continue normally.
To activate the service:
L1 SMITH Peter-405
FREE
DTMF
VPAGING
CALL_BACK FLASH
>
VPAGING
Press the dynamic function key shown on the left.
You may broadcast your message to be heard over the called
extension’s loudspeaker.
d
or
í
Replace the handset or press the “C” key to end the call in
handsfree mode.
Notes:
Typically, the time limit for this service is 20 seconds. When
this time limit expires, your extension will be automatically
disconnected, unless the called party picks up their extension,
at which time the call will proceed normally.
The announcement may be unidirectional from your exten-
sion. It may also be bi-directional, in which case the called
extension’s microphone is automatically activated at the
same time as his/her loudspeaker. In the second case, your
called party can answer you without lifting their handset.
This depends on your called party’s extension settings. See
also the “Programming Your Extension” section.
Certain extensions (such as yours) may possibly be equipped
with permanent protection against voice paging. Obviously,
this service will be denied on these extensions (and vice-
versa).
28
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Call with Temporary Protection
When you place either an internal or external call that you deem
particularly important, you may choose to activate phonic protection.
Valid on a call by call basis, this protection ensures that you will not
be disturbed by the signal that sounds when a new incoming call is
presented to you. It is still possible to place new calls to your exten-
sion on camp-on.
This service protects you from any intrusion or offer that could take
place during your conversation, most specifically from an attendant.
These services are then refused in light of your conversation in pro-
gress.
To activate this protection service, after lifting the handset or directly
in handsfree mode:
>>
Press the Next key to display the following screen, applicable
for idle extensions:
FRI 20-APR 15:28
4 Callers
Station 420
MESSAGE
SIGN_ON
PROTECT
RETRIEVE
<
>
PROTECT
Press the dynamic function key shown on the left.
FRI 20-APR 15:28
L ? Protect _
REDIAL
CALLERS
PICKUP
NAME
NO TO CALL
z
Next, dial the desired number.
You may do so according to any of the methods available for dialling
an internal or external number. Your call is then established normally.
Note: Certain extensions (such as yours) may possibly be
equipped with permanent phonic protection. The above-
described service is therefore applied to all calls that are
placed, without requiring any particular action on your part.
29
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Call in Substitution or with Signature
You can also place an external call in substitution or with signature.
This concerns the exceptional use of a third party set that is NOT
an IP H.323 Dialog 4425 or Dialog 4422, to place an external call,
just as if you were using your own extension.
The main advantage of this feature is that the call is charged to your
own extension. Another advantage is that on the substituted third
party set, you have all of your extension’s customary services,
most especially dialling discriminations relating to various external
numbers applicable for your extension.
This service is valid on a call-by-call basis. It is automatically
cancelled at the end of each call processed using this service.
To activate this substitution service, assuming you’re using a
Dialog 4223 Professional extension, after lifting the handset or
in handsfree mode:
>>
Press the Next key to display the following screen, applicable
for idle extensions:
FRI 20-APR 15:28
4 Callers
Station 420
MESSAGE
SIGN_ON
PROTECT
RETRIEVE
<
SIGN_ON
Press the dynamic function key shown on the left.
FRI 20-APR 15:28
L3 Sign-on _
STATION NO
z
z
Then dial your own extension number.
This is necessary in order to sign on to the third party set.
FRI 20-APR 15:28
L3 Password _
PASSWORD
Next, dial your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension” section.
d
or
í
Replace the handset or press the “C” key to end the service
in handsfree mode.
30
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
You may now proceed with placing your external call in substitution
from the previous extension.
FRI 20-APR 03:29:00 PM
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
After lifting the handset or in handsfree mode:
NO TO CALL
z
Simply dial the desired external number.
You may do so according to any of the methods available for
dialling an external number. Your call is then established normally.
Note: This service is accessible from any extension other
than an IP H.323 Dialog 4425 or Dialog 4422 extension.
Rather selecting the “SIGN_ON” dynamic function key,
simply dial the “75” prefix. This prefix may, however, have
been modified by your system administrator.
DTMF End-to-End Dialling
At times, you may need to call external servers, such as a reservation
centre server, when you are required to communicate interactively
through the online transmission of various dialling codes.
Your extension makes this option available to you through the
DTMF end-to-end dialling service. With this service, you can
directly exchange dialling codes with a remote server, without
your dialling being interpreted by your local facility.
This is processed through the exchange of DTMF codes, from
which the service’s name is derived. You can hear the codes in
the form of tones in your telephone.
To use this service when placing an external call:
FRI 20-APR 05:25:00 PM
L1 Aastra-001664477500
DTMF
00:25
INFO_COMM CALL_PARK
>
DTMF
Press the dynamic function key shown on the left to activate
the service.
Everything that is dialled thereafter is then directly transmitted to
the remote server.
FRI 20-APR 05:25:00 PM
DTMF dialling _
STOP
31
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Once you have finished:
STOP
Press the dynamic function key shown on the left to deactivate
the service.
You will then return to normal communication. When applicable,
the number you subsequently dial is again interpreted by your
facility, just as with other service requests.
Note: When you interact with the voice mail system, or the
automated attendant possibly integrated in your facility, the
aforementioned operations are not required. DTMF end-to-
end dialling is automatic. See also the “Voice Mail Services”
section.
Ending a Call
You may, at any time, end an ongoing call, or an outgoing call that
is being established.
This is done in the same way as with an incoming call:
d
í
Replace the handset.
Your extension returns to idle status.
Or, for handsfree mode:
Press the key shown on the left to end the call in handsfree
mode.
Your extension returns to idle status.
32
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Discrimination and Routing of External
Calls
Usually, you have access rights to the public network and all private
networks to which your facility is connected. You also usually have
the authorisation to dial any type of external number, most particularly
a public number.
In terms of the facility programming dictated by your system
administrator, there may be certain external numbers that are
discriminated.
Most particularly, this may apply to numbers for service provided by
the public network, or certain international destinations. An attempt
to dial these numbers would be automatically refused.
Moreover, your facility will also most often be equipped with a Least
Cost Routing (LCR) service for external calls, especially if your facility
is connected to private networks or different public network operators.
The LCR service therefore automatically ensures that the routing of
external numbers you dial will be processed with the least possible
cost, or managed according to the most optimal calling route.
Note: The numbers dialled using abbreviated dialling are
never subjected to any type of discrimination. If you have a
specific need or question concerning discriminated numbers,
you may ask your system administrator or facility attendants
that the numbers in questions be added to the list of abbre-
viated dialling numbers.
33
MD Evolution – Dialog 4223 Professional
Operations during a Call
Operations during a Call
When a call is established, your extension offers you the option of
alternating between the handset only and handsfree modes, and
between group listening and mute modes.
You may also control the listening volume for your extension’s
handset or loudspeaker.
You also have access to various services for processing your calls,
including:
•
•
•
•
Enquiry call to consult another internal or external party.
Refer back call between two on-line parties or broker’s call.
Call transfer between two parties.
Conference call with three or four participants.
You may also temporarily place a call on hold, in order to carry out
a non-telephone related task, or you may park a call in order to pick
it up on a different extension.
Loudspeaker Mode
When you participate in an incoming or outgoing conversation
using the handset, you can, at any time, decide to activate your
extension’s loudspeaker mode, so that a group of people may
listen in on the ongoing conversation. To do so:
Â
Simply press this key on your extension to activate the loud-
speaker mode, without hanging up the handset.
The associated LED will light. Only your extension’s loudspeaker
is activated, while the conversation continues on the handset (the
extension’s microphone is inactive).
34
MD Evolution – Dialog 4223 Professional
Operations during a Call
To deactivate the loudspeaker function:
Â
Simply press this key once again.
The LED associated with this key is unlit, and your conversation once
again continues normally in handset mode only after 5 seconds (see
details below).
Changing from Handset to Handsfree
Mode
When you participate in an incoming or outgoing conversation
using the handset – with or without the loudspeaker function – you
can at any time, decide to continue the call in handsfree mode. To
do so:
Â
Press this key to activate the loudspeaker mode.
The LED associated with this key is lit, and the letters “ML” flash on
your extension’s screen. You have 5 seconds to replace the
handset.
d
Replace the handset within 5 seconds.
Your conversation thus continues in handsfree mode. Both your
extension’s loudspeaker and microphone are active.
If you do not replace the handset within 5 seconds, only the loud-
speaker mode is activated on your extension.
Changing from Handsfree to Handset
Mode
Contrariwise, when you participate in an incoming or outgoing
conversation using handsfree mode, you can, at any time, decide
to continue the call in handset mode, providing you with more
privacy. To do so:
u
Simply lift the handset.
Both your extension’s loudspeaker and microphone will be
automatically deactivated. Only the handset remains active.
35
MD Evolution – Dialog 4223 Professional
Operations during a Call
Muting during a Conversation
When you participate in an incoming or outgoing conversation using
handsfree mode, you may activate the mute function for your ex-
tension, preventing your party from hearing what you say. To do so:
É
É
Press this key to activate the mute mode.
The LED associated with this key is lit, and your extension’s
microphone is momentarily deactivated. Only your extension’s
loudspeaker remains active.
To deactivate the mute function:
Simply press this key once again.
The LED associated with this key is unlit, and your conversation
once again continues normally in handsfree mode.
Note: This function is also applicable when you carry on a
conversation on the handset. It momentarily cuts off voice
transmission from your extension’s handset.
Adjusting the Loudspeaker or Handset
Listening Volume
Whether you are carrying on a conversation on the handset or in
handsfree mode, you can adjust the handset/loudspeaker listening
volume for your extension.
This volume is pre-set. See also the “Programming Your Extension”
section.
When necessary, during a call, you may modify the level, for
example to compensate for a temporarily noisy environment.
To do so:
ì
Simply press either the + or - keys to increase or decrease
the listening volume.
This adjustment is then only valid for the current call.
36
MD Evolution – Dialog 4223 Professional
Operations during a Call
Enquiry Call during a Conversation
Perhaps during a conversation with a first party, you wish to consult
another internal or external party.
Your extensions offers you the enquiry call service, which consists
of placing your first caller on hold, then calling the new desired
party.
You may call this second party using any functions otherwise available
when placing a single call.
FRI 20-APR 15:28
L1 SMITH Peter-405
DTMF
01:33
INFO_COMM CALL_PARK
>
Therefore, whether you are in handset or handsfree mode, you may:
NO TO CALL
z
Directly dial the number for the new internal or external party
to be contacted.
This could be carried out manually by simply dialling the party’s
number, by using abbreviated dialling to call an external number, or
by simply pressing the line or repertory key associated with this party.
Or,
L1
ÕÔ
First press the line key corresponding to the current call.
Your extension’s screen re-displays its idle status screen.
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
NO TO CALL
z
Then dial the number for the new internal or external party to
be contacted.
In this case, you may use the last external number redial service,
the call by name service or call list service, as well as any other
special function associated with placing an outgoing call. See also
the “Operations for Outgoing Calls” section.
In any case, your first caller is automatically placed on hold, and the
key representing the line on which the first call was placed will flash
quickly.
You then follow the placement of this call in the same way as for a
single outgoing call.
L2 WESSON Paul-407
FREE
DTMF
VPAGING
CALL_BACK FLASH
>
37
MD Evolution – Dialog 4223 Professional
Operations during a Call
Supposing that your first call is an internal call, you also have the
same services available to you for placing the second enquiry call
(depending on the second party’s status), as you would during a
single call (see also “Operations for Outgoing Calls”). Thus, you can
(see also the “Operations for Outgoing Calls”):
•
•
•
•
•
Be placed on automatic camp-on if the new calling party’s
extension is busy.
Activate the automatic call-back feature for the new called
extension that is busy, or not answering.
Broadcast a voice message on the new extension that is now
free, if it is equipped with a loudspeaker.
End your second call by sending a mini-message to the new
called extension, if it is compatible with this service.
Carry out an intrusion upon the current call on the new called
extension, or override the Do not disturb status for this second
party, depending on the rights assigned to your extension.
Refer Back Call between Two Parties or
Broker’s Call
During your enquiry call, supposing the second party has answered
your call, and your first party remains on hold while you carry on a
conversation with the second, you may alternate from one conver-
sation to the other.
FRI 20-APR 03:29:00 PM
L2 WESSON Paul-407
DTMF
01:53
INFO_COMM CALL_PARK >
CONFERENC
You may transfer from one conversation to the other. To do so:
L1
ÖÔ
Press the first line key that is flashing rapidly.
You are now transferred back to your first call, and your second call
is placed on hold.
FRI 20-APR 03:30:00 PM
L1 SMITH Peter-405
DTMF CONFERENC
02:33
INFO_COMM CALL_PARK
>
38
MD Evolution – Dialog 4223 Professional
Operations during a Call
To return to your second conversation:
L2
ÖÔ
í
Press the second line key that is flashing rapidly.
You are now transferred once again to the second call, and can
repeat this process as many times as desired.
FRI 20-APR 03:31:00 PM
L2 WESSON Paul-407
DTMF CONFERENC
02:53
INFO_COMM CALL_PARK
>
Or, press the “C” key if you wish to end the conversation with
the current party.
This party’s call is disconnected, while your extension is re-rung by
the call that is currently on hold.
This operation is also applicable, if, when your enquiry call is being
placed, the second party does not answer.
Note: It should be noted that these operations are the
same for answering an incoming call that is presented to
you during an ongoing call. See also the “Operations for
Incoming Calls” section.
Call Transfer between Two Parties
During an enquiry call, you can also choose to place your two call
parties in direct communication with each other, removing yourself
entirely from the conversation.
This type of call transfer can be made between two internal parties,
or one internal party and one external party, regardless who is the
calling or called parties.
It is also unconditionally applicable in the following different cases:
•
•
•
Transfer during a conversation: You may transfer a call between
two parties when one is in communication with you, and the
other is on hold on your extension. Both parties will then be in
direct communication with each other.
Call transfer on ringing: You may make a transfer when an enquiry
call is in the process of being established to a free internal exten-
sion, without waiting for that person to answer. The transferred
party will then hear the other requested extension ringing.
Call transfer on busy: You may make a transfer when an enquiry
call is in the process of being established to a busy internal exten-
sion, when it is possible for the call to be placed on camp-on.
The transferred party will then be placed on camp-on on the
other requested extension.
39
MD Evolution – Dialog 4223 Professional
Operations during a Call
In every case, the procedure is the same:
Transfer
Press the Transfer key to transfer the call in handsfree mode.
d
Or, simply replace the handset when in handset mode.
In either case, the call is transferred, and the two parties disappear
from your extension.
Notes:
If there are more than 2 parties on your telephone, the call
transfer will be carried out between the party currently con-
versing with you, and the last party who was placed on hold.
Call transfers between two external parties may also be
permitted. This essentially depends on your facility’s
configuration. If you need more information, contact your
system administrator.
Your facility may allow call transfers between two external
parties; however, it is recommended to never transfer to an
automatic machine such as: an information system, a net-
work voicemail system, etc. The connection could be very
long and costly. Moreover, during the entire duration of the
transfer, two of your facility’s ISDN network lines are busy,
which may limit other calls.
Conference Call with N Participants
When an enquiry call is established, i.e. when you are carrying on a
conversation with one party while another is on hold, you may also
decide to establish a 3-way conference call including your two calling
parties and yourself.
To do so, whether you are carrying on a conversation using the
handset or handsfree mode:
FRI 20-APR 03:31:00 PM
L2 WESSON Paul-407
02:53
INFO_COMM CALL_PARK >
DTMF
CONFERENC
CONFERENC
Press the dynamic function key shown on the left.
The 3-way conference call is established, and your extension’s
screen will be as illustrated below:
Conference
L2 WESSON Paul-407
DTMF
03:23
INFO_COMM CALL_PARK
>
40
MD Evolution – Dialog 4223 Professional
Operations during a Call
Next, you may repeat the entire enquiry and conference call procedure
to include another participant in the conference call. A conference
call can include up to 4 participants.
To do so:
L2
ÕÔ
First press the line key corresponding to the current conference
call (“Lx” is specified on the screen).
The conference call is placed on hold.
NO TO CALL
z
Then dial the number for the new internal or external party to
be contacted.
All of the usual services for dialling internal or external numbers are
available.
CONFERENC
Once again, press the dynamic function key shown on the
left, once this new party has answered your call.
The conference call now includes 4 participants.
Or, you may simply withdraw from the conference call:
d
or
í
Replace the handset or press the “C” key in handsfree mode.
This has the same result as a transferring a call between your two
parties, as your extension is now free.
On the other hand, if one of your parties withdraws from the con-
ference call, that will result in the call now being a single call with
the remaining party.
Notes:
If there are more than 2 parties on your telephone, the con-
ference call will be established between the party currently
conversing with you, and the last party who was placed on
hold.
Your extension may also be subject to enquiry calls, refer
back calls, transfers and conference calls initiated by third
party sets.
41
MD Evolution – Dialog 4223 Professional
Operations during a Call
Call Hold
When you are carrying on a single conversation, you may also
temporarily place the current call on hold, in order to carry out a
non-telephone related task. To do so:
L1
L1
ÕÔ
ÖÔ
Press the line key corresponding to the current call.
The LED associated with this line begins to flash quickly, and your
party is placed on hold on your extension.
Press the line key corresponding to the current call once
again, to return to your conversation.
The associated LED is now continuously lit.
Note: There is no time limit on this call hold service.
Call Parking and Parked Call Retrieving
When you are carrying on a single conversation, you may park the
current call, in order to subsequently retrieve it on a different exten-
sion. For example, this would allow you to change offices without
losing your call.
To do so, whether you are carrying on a conversation using the
handset or handsfree mode:
FRI 20-APR 15:28
L1 SMITH Peter-405
DTMF
01:33
INFO_COMM
CALL_PARK>
CALL_PARK
Press the dynamic function key shown on the left.
Your party is then placed on hold.
FRI 20-APR 15:28
Parking _
RETURN
ID. CODE
z
Dial the identification code for the call you wish to park.
This call identification code will be requested later when you retrieve
the parked call. This code is unrestricted, and may consist of 1 or
2 digits, according to your facility’s configuration (usually 2 digits).
A confirmation that the service was accepted is provided both
visually and audibly; the “Accepted Service” message is displayed
on the screen, and the service acceptance tone is played.
42
MD Evolution – Dialog 4223 Professional
Operations during a Call
d
or
í
Replace the handset, or press the “C” key to end this service
in handsfree mode.
Your extension returns to idle status.
You may then move about freely, then return to the parked call on
any other extension.
Typically, the duration of validity is 3 minutes. If the parked call is not
retrieved within this timeframe, it will be disconnected if it is an internal
call or re-directed to an attendant if it is an external incoming call.
To retrieve a parked call from your extension or a similar idle extension,
after lifting the handset or in handsfree mode:
>>
Press the Next key to display the following screen, applicable
for idle extensions.
FRI 20-APR 03:30:00 PM
4 Callers
Station 420
MESSAGE
SIGN_ON
PROTECT
RETRIEVE<
RETRIEVE
Press the dynamic function key shown on the left.
The extension prompts you to enter the identification code for the
parked call, as previously entered.
FRI 20-APR 03:30:00 PM
Lx Retrieve _
RETURN
ID. CODE
z
Next, dial the 1 or 2 digit identification code for the parked
call.
You are returned to your conversation.
Notes:
When an external call is either placed on hold or is parked,
the party is then connected to on-hold music, usually pro-
vided by your facility.
The parked call retrieving service may also be activated by
dialling from any type of extension. The usual sequence is:
10 <ID. CODE.>, where <ID. CODE.> is the parked call
identification code. The prefix “10” is the one usually used.
It may, however, have been modified by your system admin-
istrator.
Of course, your calls may also be subject to parking by a
third party set.
43
MD Evolution – Dialog 4223 Professional
Directory, and Call List Services
Directory, and Call List Services
Your extension also offers two sophisticated services for handling
your incoming and outgoing calls as efficiently as possible.
The first service is access to the integrated directory that is
available to your entire facility. You may consult this directory and
then directly call a party found therein, simply by selecting his/her
name. This is the Call by Name service.
The second service is the Call List service. Your extension auto-
matically saves all of the call that you receive but do not answer.
You then have the option of automatically re-dialling each caller
whose identity has been saved in this file.
Directory and Call by Name
The integrated directory that is available to everyone in the facility
includes all of the internal numbers served, as well as the external
numbers that are accessible through abbreviated dialling – each
one characterised by the name of the associated internal or external
party.
You may consult this directory from your idle extension. You may
also consult it during a conversation, typically within the context of
establishing an enquiry call. See also the “Operations during a Call”
section.
Next, once the name of the desired internal or external party is
displayed on your extension’s screen, you may place the call
automatically, simply be selecting his/her name.
On your idle extension (or after placing the current call on hold),
the following screen will be displayed:
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
44
MD Evolution – Dialog 4223 Professional
Directory, and Call List Services
NAME
Press the dynamic function key shown on the left.
You then have access to the integrated directory, and your extension
prompts you to enter one or several letters on the keypad.
*/-/+ Dial by name : _
NAME BEGIN
z
z
On your keypad, enter the first letter of the party’s name for
whom you wish to search.
Once you have dialled at least one letter through one, two three (or
even four) successive keypad keys, the first four names beginning
with the letter entered (or subsequent letters) are displayed on the
screen.
The names are displayed in alphabetical order. Internal users and
external parties who are accessible through abbreviated dialling are
both displayed together, as defined by your system administrator.
Then, if the desired name is not immediately displayed, you may:
NAME SUITE
On your keypad, enter the first few letters of the party’s name
for whom you wish to search.
The screen will update to reflect your changes.
Or,
* ì
Press the * key, then either the - or + key.
This scrolls you through the next pages of the integrated directory,
either in ascending or descending order, depending on which key
you use.
*/-/+ Dial by name : DU
Duke
Jack
Duval
Robert
Aastra
France
Aastra
Sweden
Once you have found the name of the internal or external party you
wish to contact:
<NAME>
Press the dynamic function key that corresponds to the
desired name.
The call is then placed to the selected party and established just as
if you had manually dialled the internal or external party’s number.
45
MD Evolution – Dialog 4223 Professional
Directory, and Call List Services
Call Log File
With the Call log file service, your extension automatically saves all
calls that you receive, but that were not answered when you were
absent or when your line was busy.
For each call saved, the identity – name and number, if available
– of the internal/external calling party is saved, as well as the date
and time of the call.
An internal caller may have left you a mini-message, when applicable.
This message will also be saved in the call log file. See also the
“Message Services” section.
You may consult this call log file from your idle extension. You may
also consult it during a conversation, typically within the context of
establishing an enquiry call. See also the “Operations during a Call”
section.
On your idle extension (or after placing the current call on hold), on the
second line of your extension’s screen will be displayed the number
of calls saved. There will be no information if the call log file is empty.
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
From this point:
CALLERS
Press the dynamic function key shown on the left.
The information for the last unanswered call received will be
displayed.
Call of 18-JUNE 07h06 am
Aastra-500
ERASE
1/4
WOULD LIKE TO SEE YOU
NEXT_MSG NEXT
CALL
You then have the following options:
NEXT
Press the dynamic function key shown on the left to scroll
through the call log file.
This will allow you to scroll through the content of your call log file in
order of the time in which they were received, from the most recent
to the oldest.
Or,
ERASE
Press the dynamic function key shown on the left to delete an
entry in the call log file.
The corresponding call is simply deleted from the call log file, without
returning the party’s call.
46
MD Evolution – Dialog 4223 Professional
Directory, and Call List Services
Or,
CALL
Press the dynamic function key shown on the left to call the
party.
The caller whose identity was saved in the call log file will be auto-
matically called back; the call is established just as if you had manually
dialled the internal or external party’s number.
This call will then automatically be erased from the call log file, whether
or not you call was answered.
If a mini-message was associated with a call, you also have the
following option:
NEXT_MSG
Press the dynamic function key shown on the left to scroll
through the content of a mini-message.
This option is only available if your caller left a mini-message, and
when this mini-message is too long to be entirely displayed on the
screen at once.
Note: Your call log file is limited to the last 10 calls received;
when it exceeds this limit, the oldest calls are automatically
eliminated. If you have received several calls from or the
same party over a period of time, only the last call is saved.
47
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
Call Forwarding Services
Your extension also offers you various call forwarding services that
enable you to direct incoming calls to another internal or external
destination, whenever you are absent and/or busy, travelling, or when
you simply would rather not be disturbed.
The following different types of services are available:
•
•
•
•
Call forward on no-answer condition: Your calling parties will be
re-directed to the pre-defined call forward recipient, whenever
you do not answer their calls, typically after a 20-second delay.
Call forward on busy condition: Your calling parties are immedi-
ately re-directed to the pre-defined call forward recipient whenever
your extension is busy.
Call forward on no-answer and busy conditions: Your calling
parties are re-directed to the pre-defined call forward recipient
in both cases.
Immediate call forward: All incoming calls are immediately re-
directed to the pre-defined call forward recipient. Typically, this
could be your secretary’s internal number, or your external
mobile phone number when you are travelling.
•
•
“Do not disturb” call forward: Your extension is unavailable, and
no call forwarding services were activated. Your internal party’s
calls are immediately disconnected, and your “Do not disturb”
status is displayed on extensions that feature a display screen.
Calls from your external parties are immediately re-directed to
your facility’s attendants.
Call forward on mini-message: Your extension is unavailable,
and no call forwarding services were activated. Your internal and
external parties receive an “Absent” message that you have pre-
recorded. See the “Message Services” section.
The number to which a call forward may be directed could be an
internal party’s individual extension, a hunt group, another user’s
personal group, or even the access number for an integrated voice
mail system that your facility may use. See the “Voice Mail Services”
section.
48
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
It may also consist of an external number containing up to 18 digits,
including the network access prefix. This may be an external number
that is accessible through abbreviated dialling.
You may use fixed call forward defined by your system administrator.
This may consist of a call forward on no-answer condition, a call
forward on busy condition, or a call forward on no-answer and busy
conditions.
This fixed call forward is applied by default whenever you do not
define a variable call forward for your calls. This is often the case
when your facility uses an integrated voice mail service, which – by
default – receives your calls encountering a no-answer or busy
condition.
You may define all of the types of call forwards listed above, on
your own. This is referred to as a variable call forward that takes
precedence over a possible fixed call forward.
This variable call forward may be:
•
A pre-defined variable call forward assigned to the Call-Fwd key
on your extension. This is valid for all types of call forwards, except
call forward on mini-message. Simply pressing this Call-Fwd
key will either activate or de-activate the pre-defined variable
call forward.
•
A variable call forward defined on a case by case basis. This is
valid for any type of call forward that is activated after it has been
defined. This then will take precedence over a call forward that
was pre-defined on the Call-Fwd key.
In any case, only one call forward applies at any given moment.
Defining a new variable call forward automatically cancels any
definition that previously existed.
A variable call forward is usually defined on a case by case basis
before you leave your extension. You may also remotely define your
call forward recipient from his/her internal extension. This is the
“Follow me” or “Third party call forward (or remote call forward)”
service.
The call forwards previously mentioned are those that are predefined.
Finally, your extension also offers you the call deflection service. This
is a call forward activated after a call is presented to you, on a call-
by-call basis, in cases where you would rather not answer that spe-
cific call, thus directing it to another recipient.
49
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
Notes:
When any type of call forward is defined on your extension,
you still have the option of placing calls and activating any
type of service from your extension.
When you have defined any type of call forward to an
internal recipient, the latter has the option of calling you
without any restrictions.
When a call forward on busy condition is defined on your
extension, no more incoming calls will be presented to you
when you have an ongoing call. In the same way, the services
of consulting and answering a new call are de-activated.
Certain extensions, including yours, may be authorised to
override another extension’s Do not disturb status. This is
most often the case with your facility’s attendants. See the
“Attendant-Based Services” section.
For any call forward defined to be directed to an external
recipient, forwarding of calls issued from external parties
may take place either through your facility’s resources or
directly at the Euro-ISDN network level, according to your
facility’s configuration.
You may program a call forward from your extension to it-
self. This enables you to bypass any fixed call forward that
is applicable to your extension. Your extension is therefore
may be contacted normally.
When a call forward is programmed for your extension, a
special dial tone is heard when you lift your handset. This is
also the case when you are the recipient of a call forward.
Defining a Variable Call Forward
Defining variable call forwards on a case-by-case basis is carried out
within the framework of your extension’s programming functions.
When your extension is idle:
Menu
Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
Programming
disabled
LOCK
disabled
enabled
disabled
CALL_FWD>
GEN_CALL GROUP
50
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
CALL_FWD
Press the dynamic function key shown on the left.
The following screen is displayed when you are granted access to
variable call forward programming.
Call fwd
IMMEDIATE NO_REPLY
BUSY
MESSAGE>
Call fwd
NODISTURB NREP+BUSY
REMOTE_FWD
SYSTEM
>
<
Call fwd
CANCEL
CANC_SYST
Press the dynamic function key that corresponds to the desired
type of call forward, most particularly:
IMMEDIATE
To activate an immediate call forward.
NO_REPLY
BUSY
To activate a call forward on no-answer condition.
To activate a call forward on busy condition.
NREP+BUSY
To activate a call forward on no-answer condition and busy
condition (after having pressed the Next or >> button).
NODISTURB
To activate a Do not disturb call forward (after having pressed the
Next or >> button).
In the first four cases, your extension displays the type of call
forward requested, and prompts you to enter the number for the
internal or external call forward recipient. In the latter case, simply
exit your extension’s programming mode (see details to follow).
Call forward no-reply
Number : _
BLANK
CURSOR+
CONFIRM
RETURN
FWD NO
z
Enter the internal or external number to receive your call
forwards.
As previously indicated, the recipient’s number may contain up to
18 digits, including the network access prefix. An external number
may be one that is accessible through abbreviated dialling.
CONFIRM
Press the dynamic function key shown on the left to confirm
the number you entered.
Your extension displays that you programming has been accepted.
51
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
í
Press the C key on your extension to exit the programming
mode.
Call-Fwd
ÖÔ
The variable call forward that you have just defined is effective imme-
diately. This status will cause your extension’s Call-Fwd key to
flash. If you return to your extension’s programming mode, the
“enabled” status is also displayed above “CALL_FWD”.
Notes:
The “BLANK” and “CURSOR+” functions enable you to
delete or modify the number for an existing call forward. The
“RETURN” function enables you to exit the screen without
modifying the content.
Your extension may also be subject to call forwarding from
third party sets. Certain extensions (such as yours) may
possibly be equipped with permanent protection against
receiving call forwards from third party sets. Obviously, this
service will be denied on these extensions (and vice-versa).
Cumulative call forwards between different users are
authorised.
Cancelling a Variable Call Forward
A temporary variable call forward is shown on your extension by a
flashing Call-Fwd key.
To cancel this call forward:
Call-Fwd
Call-Fwd
ÖÔ
Ô
Simply press the Call-Fwd key.
The variable call forward is immediately cancelled.
This change in status will also cause your extension’s Call-Fwd key
LED to turn off. If you return to your extension’s programming
mode, the “disabled” status is also displayed above “CALL_FWD”.
Note: As an alternative, you may also access your exten-
sion’s variable call forward programming, and select the
“CANCEL” option on the third screen. The result will be the
same.
52
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
Activating a Call Forward Pre-Defined on
the Call-Fwd Key
You may also pre-define and assign a variable call forward to the Call-
Fwd key on your extension. See the “Programming Your Extension”
section.
This enables you to quickly activate or deactivate a variable call
forward that you use frequently, for example to your secretary.
To activate this pre-defined call forward:
Call-Fwd
Call-Fwd
Ô
ÕÔ
Simply press the Call-Fwd key on your extension, which initially
is turned off.
The pre-defined call forward is immediately activated.
This change in status will also cause your extension’s Call-Fwd key
LED to turn on. In your extension’s programming mode, the
“enabled” status is displayed above “CALL_FWD”.
Deactivating a Call Forward Pre-Defined
on the Call-Fwd Key
On the other hand, to deactivate a pre-defined call forward assigned
to the Call-Fwd key on your extension:
Call-Fwd
Call-Fwd
ÕÔ
Ô
Simply press the Call-Fwd key on your extension, which is
initially on.
The pre-defined call forward is immediately deactivated.
This change in status will also cause your extension’s Call-Fwd key
LED to turn off. In your extension’s programming mode, the
“disabled” status is displayed above “CALL_FWD”.
53
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
Follow Me or Third Party (or Remote) Call
Forward Service
In the event that you may have forgotten to define your variable call
forward before leaving your extension, you may remotely program it
from any internal extension destined to be the recipient of your call
forwards.
This is the Follow me or Third party (or remote) call forward service
that, assuming the recipient has an extension identical to yours, is
activated as follows, from an idle extension:
Menu
Press the Menu key on the third party set.
You then access programming for the third party set.
Programming
disabled
LOCK
disabled
enabled
disabled
GEN_CALL GROUP
CALL_FWD
>
CALL_FWD
>>
Press the dynamic function key shown on the left.
You then access call forward programming.
Press the Next key to display the following screen:
Call fwd
NODISTURB NREP+BUSY
REMOTE_FWD SYSTEM
>
REMOTE_FWD
Press the dynamic function key shown on the left.
You then access remote call forward programming.
Station nb to call forward :
_
CONFIRM
RETURN
STATION NO
z
Then dial your own extension number.
The third party set displays the following screens:
Remote CFW
OF 420
IMMEDIATE NO_REPLY
Remote CFW
BUSY
MESSAGE
>
OF 420
NODISTURB NREP+BUSY
CANCEL
<
54
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
IMMEDIATE
Press the dynamic function key shown on the left to define an
immediate call forward for your extension.
You may also define any other type of variable call forward, just as
you would if you were at your own extension by selecting one of
the other dynamic function keys available.
The third party set displays the requested type of call forward, and
then prompts you to enter the number for the call forward recipient;
in this case it is the extension number where you are located.
Remote CFW immediate
Number : _
OF 420
BLANK
CURSOR+
CONFIRM
RETURN
FWD NO
z
Dial your present internal extension number.
CONFIRM
Press the dynamic function key shown on the left to confirm
the number you entered.
The third party set then prompts you to enter your user password.
FRI 20-APR 15:28
L1 Password _
PASSWORD
z
Finally, enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension” section.
Your password is displayed in asterisks.
The following screen confirms the call forward programming.
L1 420 -> 480****
ALL CALL FORWARD ACCEPTED
í
ÖÔ
Press the C key on your extension to exit the third party set
programming mode.
The third party set defined as the recipient of your call forwards
returns to idle status, and the call forwarding from your extension
that you just defined is effective immediately.
Call-Fwd
Just as it would if you had defined it from your own extension, your
extension’s Call-Fwd key will flash.
You may then cancel this call forward from your extension, in the
same way as you would a variable call forward activated directly
from your own extension (see previously mentioned details).
You may also cancel it from the recipient extension, according to
the aforementioned procedure, this time selecting the “CANCEL”
dynamic function.
55
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
You may also repeat the procedure from a new recipient extension,
in which case, your calls would follow you as you move from office
to office.
Notes:
The Follow me service may also be activated by dialling from
activate remote call forwarding, the usual sequence is: 65
<NO> <PSW>, where <NO> is your extension number, and
<PSW> is your user password. To deactivate remote call
forwarding, the usual sequence is: 66 <NO> <PSW>. The
type of call forwarding that is defined is always “immediate”
call forwarding. The prefixes “65” and “66” may have been
modified by your system administrator.
Depending on the rights assigned to your extension and each
recipient extension, access to the Follow me and Remote call
forwarding services may be restricted. Therefore, you always
have the option of requesting that a facility attendant define
a remote call forward for your account. See the “Attendant-
Based Services” section.
Call Deflection
When you have no call forwards programmed on your extension,
you may instead deflect a call that is presented on your extension,
which you would prefer not to answer but rather re-direct it to another
recipient.
Once again, the number to which a call may be deflected could be
an internal party’s individual extension, a hunt group, another user’s
personal group, or even the access number for an integrated voice
mail system that your facility may use. See the “Voice Mail Services”
section.
It may also consist of an external number containing up to 18 digits,
including the network access prefix.
When a call is presented on your idle extension, this call deflection or
screening is carried out on a call-by-call basis, as described below,
without lifting your extension’s handset.
L1 Aastra-00164477500
DIRECT
REDIAL
CALLERS
PICKUP
NAME
>
56
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
* * z
Dial the prefix to access the call deflection service.
By default, the prefix is “**”, however this may have been modified
by your system administrator.
FWD NO
z
Next, directly dial the internal or external number for the
recipient of the call deflection.
For an internal recipient, simply enter the internal number. For an
external recipient, the number should be entered using the follow-
ing format: 0<NO>#, where 0 is the network access prefix, and
<NO> is the external number to be reached. An external recipient
number may also be dialled using abbreviated dialling.
í
Press the C key on your extension to disconnect.
Your extension returns to idle status, while your call is deflected to
the recipient you have just programmed. It is then processed as a
normal call forward.
Available from your idle extension, the call deflection service may
also be used when you have an ongoing call.
L2
L1
Ô
ÖÔ
In this case, simply select a free line key before dialling the previous
** <FWD NO> sequence.
Your current call will be automatically placed on hold, but only until
the call deflection has been activated.
Notes:
This service is also available if several calls are presented to
you simultaneously. Simply dial the ** prefix, select the line
key that corresponds to the call to deflect, and then dial the
call deflection recipient number (<FWD NO>).
The ** <FWD NO> sequence may be saved on one of your
extension’s line keys, or on one of the associated satellite
repertory keys, when applicable. In this case, the service
may be activated by simply pressing this key to deflect the
call to a pre-defined call forward recipient.
57
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
Call Forwarding Information
When you attempt to contact an internal party who has activated
call forwarding (or after your call has been deflected), you will know
this service has been activated when you hear the re-routing on call
forward tone. Your extension’s screen is also updated with the
identification information for the internal or external party to whom
you will be transferred.
If you are the recipient of a call forward (or a call deflection), your
extension’s screen will display the identity of the internal or external
caller, as well as the identity of the internal party who originated the
call forward (or call deflection), preceded by the word, “FOR”.
L1 Aastra-00164477500
FOR SMITH Peter-405
REDIAL
CALLERS
PICKUP
NAME
>
58
MD Evolution – Dialog 4223 Professional
Message Services
Message Services
Your extension also offers text message services that enable you to
exchange mini-messages over the ISDN network with internal or
even external parties.
The available services include:
•
When placing a call, you have the option of transferring a mini-
message to your called party, in case he/she does not answer
your call, or has an ongoing call.
•
In the same way, when you receive a call, you may consult a
mini-message sent to you by the party who attempted to
contact you.
You also have the option of a call forward to mini-messaging service.
This is also called the call forward on absence service. This does
not consist of a call forward in its truest sense; your incoming calls
are not re-directed. Rather, the absence message that you selected
when defining your call forward will be automatically transmitted to
the party who is trying to contact you.
For this purpose, your facility may make 10 pre-formatted mini-
messages available to you for one of the aforementioned purposes.
Note:
In relation to using these services with external parties, this
assumes that they are also ISDN network users, and that
they have ISDN terminals that are compatible with the mini-
messaging service. Certain extensions (such as yours) may
be permanently protected against the automatic use of this
call forward on absence service for external parties. In this
case, the text messaging services are only applicable internally
within your facility.
59
MD Evolution – Dialog 4223 Professional
Message Services
Sending a Mini-Message
Suppose you attempt to contact someone who either does not
answer his/her extension, or whose extension is busy.
Over and above the other operations available to you during outgoing
calls (see “Operations for Outgoing Calls” section), you may also
end your call by sending a mini-message to the called extension,
if it is compatible with this service.
To do so, no matter what the status of the requested party:
L1 SMITH Peter-405
WAIT
DTMF
CALL_BACK FLASH
>
<
>>
Press the Next key to display the following screen:
L1 SMITH Peter-405
WAIT
MSG+DISC
MSG+DISC
Then press the dynamic function key shown on the left.
Your extension then prompts you to select the mini-message to
send to your party.
L1 SMITH Peter-405
0 -> HAS CALLED YOU BACK
SELECT
NEXT
RETURN
NEXT
Press the dynamic function key shown on the left.
This will allow you to scroll through the various available mini-
messages. By default, the messages available are: “HAS CALLED
YOU BACK”, “WILL CALL BACK” and “WOULD LIKE TO SEE
YOU” (see also other messages available, described later).
SELECT
Press the dynamic function key shown on the left to select
the mini-message to send.
Your extension’s screen displays the following:
L1 SMITH Peter-405
WOULD LIKE TO SEE YOU
CONFIRM
RETURN
CONFIRM
Press the dynamic function key shown on the left to validate
your selection.
This ends your call immediately upon sending the associated mini-
message.
60
MD Evolution – Dialog 4223 Professional
Message Services
d
Replace the handset.
Your extension returns to idle status. (This occurs automatically in
handsfree mode.)
Your called party will then be able to read your message from his/
her call log file, or the equivalent.
Notes:
This service is not available for any internal party who is not
equipped with an extension that would allow them to consult
your message. If that is the case, the MSG+DISC dynamic
function will not be displayed.
This service is available with single or enquiry calls. It is also
available when you have an ongoing call, if desired.
This service may also be activated at the beginning of your
call, in order to only transmit a message to your called party.
In this case, select the MESSAGE function available from your
before dialling the number to call and hanging up immediately.
Receiving a Mini-Message
In the same way, when you do not answer a call, you may receive a
mini-message from internal or external calling parties whose exten-
sions are compatible with the ISDN mini-messaging service.
This mini-message will be saved in the call log file along with the
caller’s identity, and the date and time of the call; see the “Directory,
and Call List Services” section.
Call of 18-JUNE 07h06 am
Aastra-500
1/4
WOULD LIKE TO SEE YOU
NEXT_MSG NEXT
ERASE
CALL
61
MD Evolution – Dialog 4223 Professional
Message Services
Call Forward on Mini-Message or
Absence
As an alternative to all other available variable call forwarding services
(see “Call Forwarding Services” section), you may also re-direct your
extension to a mini-messaging or call forward on absence service.
The absence message that you selected when defining your call
forward will be automatically transmitted to any internal or external
party who is trying to contact you; the call will then be immediately
disconnected.
To define a call forward on absence for your extension, from your
idle extension:
Menu
Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
Programming
disabled
LOCK
disabled
enabled
disabled
GEN_CALL GROUP
CALL_FWD
>
CALL_FWD
MESSAGE
Press the dynamic function key shown on the left.
The following screen is displayed when you are granted access to
variable call forward programming.
Call fwd
IMMEDIATE NO_REPLY
BUSY
MESSAGE
>
Press the dynamic function key shown on the left that corre-
sponds to the desired type of call forward on absence.
Your extension then prompts you to select the mini-message that
you wish to use as your absence message.
Call fwd to message
0 -> HAS CALLED YOU BACK
SELECT
NEXT
RETURN
NEXT
Press the dynamic function key shown on the left.
This will allow you to scroll through the various available mini-
messages.
By default, the situational messages available are: “IN A MEETING
UP TO **:** O’ CLOCK”, or “ABSENT UNTIL **-** **:** O’ CLOCK”,
or “IN CASE OF EMERGENCY, CALL **********”, and “PLEASE CALL
BACK IN A FEW MINUTES” (see also other available messages
mentioned earlier).
62
MD Evolution – Dialog 4223 Professional
Message Services
SELECT
Press the dynamic function key shown on the left to select
the mini-message on absence.
* * z
Complete the message, replacing the “*” in the message with
numbers from your keypad, as necessary.
Once the message is selected, it needs to be completed with the
numerical information such as the hour and minutes, date and
time, or telephone number.
Call fwd to message
IN A MEETING UP TO 18:30 O’ CLOCK
CONFIRM
RETURN
CONFIRM
Press the dynamic function key shown on the left to confirm
your selection.
Your extension confirms the call forward on absence programming.
í
Press your extension’s C key to exit programming mode.
Call-Fwd
ÖÔ
Your call forward on absence programmed in this manner is
effective immediately. As with any other variable call forward, your
extension’s Call-Fwd key will also flash.
will immediately receive your absence message. This may also be
the case for an external ISDN calling party whose network is compat-
ible with this mini-messaging service, assuming that your extension
is not specifically and permanently protected against the use of this
call forward on absence service for external parties.
In the opposite case, a call issued from an incompatible external
party will be redirected to your facility’s attendants, who will see
your message automatically displayed on their extension, and will
be able to accurately inform your external calling parties.
Note: A call forward on absence is cancelled in the same
manner as any other type of variable call forward – see “Call
Forwarding Services” section.
63
MD Evolution – Dialog 4223 Professional
Voice Mail Services
Voice Mail Services
Depending on its configuration, your facility may have an integrated
voice mail system, which may or may not be associated with an
automated attendant service.
If this is the case, you then have normal access to a personal mailbox.
You may then program your extension to forward your calls to this
mailbox when you do not answer, if you are busy, or if you are tem-
porarily absent.
According to the operating mode attributed to your mailbox, your
parties will simply be informed of your absence, and then you will
have the option of either leaving a voice message for you, or having
their call redirected to an assistant or any other extension you may
have defined.
Whenever a new voice message is left in your mailbox, you will be
automatically notified by an icon displayed on your extension. You
may also program the system to notify an external number as well.
Calling the integrated voice mail service then permits you to consult
each new voice message that was left, and then you may either
delete it or archive it, as you deem necessary. You may consult your
mailbox from your extension, from any other extension in the facility,
or from an external network.
You also have mailbox management options, such as recording a
personalised greeting, programming an external notification upon
reception of voice mail, or programming an assistant’s number, as
the case may dictate.
If you are part of (a) hunt group(s) (see the “Group Services” section),
you will also receive voice mail that may be left for the hunt group in
general when no one answers, if the group is congested or when it
is closed. These messages may also be consulted directly from your
individual mailbox.
Besides your individual mailbox, you may also be assigned to a
common mailbox for distribution purposes, which may also be
shared between different extensions in your facility.
This then allows calling parties, or even you, to leave a voice mes-
sage in this common mailbox that will then be distributed to all of
the members who share this mailbox.
64
MD Evolution – Dialog 4223 Professional
Voice Mail Services
Note: This is also true, of course, of all the other extensions
in your facility. Everyone then, has the liberty of leaving voice
mail in any available individual or common mailbox.
Types of Individual Mailboxes
Your individual mailbox may be managed according to one of the
following three operating modes:
•
•
•
In answering mode: Your mailbox only plays an absence mes-
sage that you may manage yourself. Calling parties who are
directed to your mailbox hear your message, however they are
not able to leave a message for you.
In recording mode: Your mailbox plays a greeting that you may
manage yourself. Then, calling parties who are directed to your
mailbox hear your message, and then may leave a voice mes-
sage for you that you may subsequently consult.
In personal assistant mode: Your mailbox plays a greeting that
you may manage yourself. Then, calling parties who are directed
to your mailbox may either leave a voice message, or if they so
desire, be redirected to your assistant, to another extension you
previously designated, or to your facility’s attendants.
The selection of an operating mode for each mailbox is usually
overseen by your system administrator. The mode usually used is
the recording mode (which is assumed in the rest of this guide).
Call Forwarding to a Voice Mailbox
Forwarding calls to your individual mailbox may be effective
according to one of the following types of call forwards:
•
Call forward on no-answer condition: Your calling parties will be
re-directed to your mailbox, whenever you do not answer, typically
after a 20-second delay.
•
•
Call forward on busy condition: Your calling parties are immedi-
ately re-directed to your mailbox whenever your extension is busy.
Call forward on no-answer and busy conditions: Your calling
parties are re-directed to your mailbox when there is no answer
and when your extension is busy.
•
Immediate call forward: All calls are immediately re-directed to
your mailbox.
65
MD Evolution – Dialog 4223 Professional
Voice Mail Services
This may consist of a fixed call forward on no-answer condition, on
busy condition, or a call forward on no-answer and busy conditions
that was defined by your system administrator. This is applied by
default whenever you do not define a variable call forward for your
calls. This is often the case when a facility uses as an integrated voice
mail service, which – by default – receives your calls encountering a
no-answer or busy condition.
This variable call forward takes precedence over a possible fixed
call forwards.
It may also be managed on a case-by-case basis, for example
– processing an immediate call forward when you are away from the
office. It may also be pre-defined on your extension’s Call-Fwd key,
in which case, simply pressing that key would activate or deactivate
the variable call forward to your mailbox.
You may also use the call deflection service, directing calls to your
mailbox. “Call-by-call” refers to directing a call to your mailbox that
is presented to you, but that you would rather not answer.
The operating modes for these different services are identical to the
other call forwarding services – see the “Call Forwarding Services”
section.
FWD NO
z
Simply put, the recipient number for your call forward is the internal
access number for your facility’s integrated voice mail system.
=
To identify the number to receive your call forward, no matter what
it is:
884
z
Dial 884.
This is the usual access number for a system’s integrated voice
mail system. If you need more information, contact your system
administrator.
Note: It is advisable to save this number on one of your
extension’s line keys (see details to follow).
Greeting of Parties and Leaving of
Messages in Your Voice Mailbox
Once a call forward to your mailbox has been programmed, parties
directed to your mailbox will first receive a greeting message.
By default, the greeting message is: “Welcome in the called extension
mailbox”. In the case where the call forward is on busy condition, it
is preceded by the following system message: “The requested ex-
tension is busy”.
66
MD Evolution – Dialog 4223 Professional
Voice Mail Services
You may personalise this greeting as you wish. Until you have
personalised the greeting, the system will offer you this option
whenever you consult your mailbox (see details to follow).
A new system message then prompts the party to leave a voice
message after the “beep” (except in cases of where the mailbox
is set to answering mode only).
The standard configuration allows a voice message to last up to
30 minutes, with up to a total of 100 messages that may be saved
in your mailbox, depending on the voice mail system’s capacity.
Notes:
Messages lasting less than 3 seconds are not taken into
account. An 8-second silence will automatically terminate
a voice message.
This is also the case when you are directed to your calling
party’s mailbox.
Internal Notification of Messages Left in
Your Mailbox
Whenever a new message is left in your mailbox, you will be
immediately notified by an icon displayed on your extension.
The letters “WM” are displayed on the first line of your extension
when it is idle.
FRI 20-APR 15:28
WM
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
Lx 884
ÖÔ
If you took the time to program one of your extension’s program-
mable line keys or a repertory key on a satellite with the voice
messaging system’s access number (884, by default), the LED
associated with that key will flash rapidly whenever a voice
message is left for you.
You will also be notified by a specific voice announcement heard
each time you lift your handset or attempt to place a call in hands-
free mode. By default, the message is: “A message has been
deposited in your voice mailbox”.
This notification status remains until you have consulted the new
message, or if there are any unread messages in your mailbox.
67
MD Evolution – Dialog 4223 Professional
Voice Mail Services
External Notification of Messages Left in
Your Mailbox
You may also program your extension to automatically notify you
at an external number (see details to follow) whenever a new voice
message is left in your mailbox.
Typically, this number could be your GSM mobile phone when you
are out of the office.
When a new message is left in your mailbox, a call is then auto-
matically emitted to each external number that you have defined.
If you answer this automatic call, you will be transferred directly to
your mailbox. You will then be prompted to enter your user pass-
word in order to consult your new voice message (see details to
follow).
If you do not answer within a certain timeframe (typically, 30 seconds),
the automatic call process will be repeated with up to 5 consecutive
attempts, executed at 45-minute intervals (typical values).
Note: External notifications of new voice messages left in
your mailbox is usually restricted to business hours between
9 a.m. and 6 p.m., based on your facility’s local time.
Internal Access for Consulting
Your Voice Mail
Consulting voice messages left in your mailbox is usually carried
out from the extension that was notified.
Dial the access number for your facility’s integrated voice mail
system (884 by default). To do this, after lifting the handset or in
handsfree mode:
884
z
Dial 884.
Or, if you took the time to program one of your extension’s line keys
or satellite repertory keys, with your voice mail access number:
Lx 884
ÖÔ
Simply press the programmable line or repertory key associ-
ated with the voice mail system.
If there are any messages left in your mailbox that you have not yet
heard, the associated LED will flash quickly; if there are no messages
you haven’t heard, it will be turned off.
68
MD Evolution – Dialog 4223 Professional
Voice Mail Services
In either case, a system message will prompt you to enter your user
password.
FRI 20-APR 15:28
DTMF dialling _
DTMF
INFO_COMM CALL_PARK
>
PASSWORD
z
z
Enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension” section.
You are now connected to your mailbox’s consultation menu (see
details to follow).
External Access for Consulting Your Voice
Mail
Normally, it is also possible for you to access your voice mail from
a DTMF analogue extension or a GSM mobile phone that supports
DTMF end-to-end dialling mode on an external network.
Access is then gained through the automated attendant usually
implemented and associated with a system’s integrated voice mail,
even when an automated attendant’s functions are not effectively
used.
Access is gained as follows:
AA DID NO
Dial the DID number for your company’s automated
attendant (AA).
Usually, the internal number for the automated attendant is 885. This
is associated with DID numbers relating to your facility. Contact your
system administrator for more information.
You are then connected to the automated attendant’s voice menu.
* z
Dial “*” in order for your call to be transferred to voice mail.
“*” is the code used by default to consult voice mail through the
automated attendant. It may have been replaced by “#”.
You are then connected to the voice mail system and are prompted
to dial the mailbox number you wish to access.
STATION NO
z
Dial your extension number, which is also your mailbox
number.
69
MD Evolution – Dialog 4223 Professional
Voice Mail Services
As with internal consultation, a system message prompts you to
enter your user password.
PASSWORD
z
Enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension” section.
You are now connected to your mailbox’s consultation menu (see
details to follow).
Notes:
Interaction with the voice mail system or automated attendant
is carried out through the exchange of DTMF codes that you
may hear on your telephone. For an internal call, the transition
to DTMF end-to-end dialling is automatic. It is also the default
from an external analogue DTMF extension. From a GSM
mobile phone, transitioning to DTMF end-to-end dialling may
necessitate a specific operation, depending on the GSM
mobile phone involved.
The above method is also applicable for consulting your voice
mail from a third party set within your facility. Simply begin
by dialling the internal number – typically 885 – for the auto-
mated attendant.
An alternative solution for accessing your mailbox from out-
side your facility is dialling your DID number. If your extension
is successfully connected to the voice mail system, the rest
of the procedure is identical to that described.
Consulting Services and Managing
Your Voice Mail
Whether you consult your voice mail from your own extension, from
a third party set, or from an external network, once you are connected
to your mailbox’s consultation menu, the services offered to you for
processing your messages are always the same.
This also is true of the personalisation services for your mailbox,
accessed in the same manner (see details to follow).
Initially, your mailbox will indicate how many voice messages were
recorded, according to one of the following two system message
forms:
•
•
“You have X new messages and Y old messages”.
“You have no message. Please hang-up or dial * to customise
your mailbox”.
70
MD Evolution – Dialog 4223 Professional
Voice Mail Services
The voice mail system distinguishes new messages that have not
been heard from those that have already been heard and that were
subsequently automatically archived, unless you specifically erased
them.
These are organised into two distinct lists, where each type of
message is sorted in chronological order from the oldest to the
newest.
They are consulted beginning with new messages, from the oldest
to the newest, then continue with the archived messages, from the
oldest to the newest.
Next, the consultation menu will indicate the various services that
are available for managing your messages. You may listen to it in its
entirety, or interrupt it at any time by dialling a service code.
Note: The consultation menu is repeated up to 3 times if you
do not execute an action when it is being played. It is also
automatically repeated when a service has been success-
fully completed.
The services available for listening to voice messages are as follows:
3
1
z
z
Dial “3” to listen to the next message.
Initially, you will hear the oldest “new” message, and then each
following message, in the chronological order described above.
Dial “1” to listen to the previous message.
You then will hear the messages in the opposite chronological order
of the one described above.
2
4
z
Dial “2” to listen to the previously selected message.
The message is repeated from the beginning.
z
z
z
Dial “4” to rewind within the current message.
The message is rewound to the point 10 seconds prior to the
current point.
5
6
Dial “5” to listen to pause or restart the current message.
Pressing the pause code the first time will suspend the play of the
message at the present point. Pressing the same code a second
time restarts the message from this same point; play will be auto-
matically restarted after a 15-second pause.
Dial “6” to listen to fast-forward within the current message.
The message is fast-forwarded to the point 10 seconds past to the
current point.
71
MD Evolution – Dialog 4223 Professional
Voice Mail Services
You may also request the date and time stamping for the message
to which you are currently listening. To do so:
7
z
z
Dial “7” to obtain the date and time stamping for the current
message.
Depending on whether the message was left on that same day, or a
previous day, the day/month (DDMM) and hour/minute (HHMM) data
concerning when your message was left are transmitted vocally on
your extension (according to one of the forms described below), and
then your current message is restarted.
•
•
“Message received at HHMM to-day”.
“Message received at HHMM on DDMM”.
Once you have listened to your messages in whole or in part, you
may then individually erase each message, or request that your
entire mailbox be erased. To do so:
8
Dial “8” to listen erase the current message.
This can be carried out immediately following the message, or while
it is being played.
8
# z
Dial “8 #” to erase all of the messages in your mailbox.
This pertains to both new and archived messages in your mailbox,
even if the former have not been heard.
In either case, a system message will prompt you to confirm
erasing the current message or all of your mailbox messages.
At any time, you may exit the voice mail system. To do so:
9
z
Dial “9” to end your call.
d
or
í
Replace the handset, or press the “C” key to end this service
in handsfree mode.
Your extension returns to idle status.
The non-consulted messages remain classified as new messages,
while consulted messages are automatically archived.
The icon indicating new messages will still be displayed on your
extension if any non-consulted voice messages remain. On the
other hand, if you have consulted all of your mailbox messages,
your extension is automatically un-notified.
Lx 884
Ô
In the second case, the letters “WM” will disappear from your
extension, you will hear the normal dial tone when you lift the
handset, and the LED light associated with a line or repertory key
that you assigned to the voice messaging system will turn off.
Note: Typically, new messages are saved for a period of
30 days. Archived messages are typically saved for 7 days,
after which they are automatically erased.
72
MD Evolution – Dialog 4223 Professional
Voice Mail Services
Automatic Call-Back to the Party Who
Left a Message
When you are consulting a voice message, you also have the option
of automatically calling the number that the system automatically
saved when the caller left the message.
This may consist of an internal or external calling party, according to
his/her identification provided by the ISDN network (or equivalent).
To do this, while listening to a message:
0
z
Simply dial “0”.
The person who left the message is then automatically called and
the call is established just as if you had manually dialled the internal
or external party’s number.
Additional Personal Assistant Services
If your mailbox is set to personal assistant mode, you offer your
calling parties the option of leaving voice messages that you may
subsequently process as previously described.
They also have the option of being directed to the personal assistant
you designated – typically your secretary’s extension or your facility’s
attendants.
To do so, after your greeting is played, the system message is
played and prompts each caller to leave a voice message after a
“beep”, and also offers them the following alternative options:
0
9
z
z
Dial “0” to be connected to your personal assistant.
The call is then directly connected to the designated internal exten-
sion, or by default – if you had not defined it – to the attendants.
Dial “9” to be connected to the attendants.
The call is directly routed to the attendants.
If neither of the two preceding codes is dialled within a 3-second
delay, the call is directed to your mailbox, by default.
Notes:
The number for a personal assistant may possibly be an
external number.
This is also the case when you are directed to you calling
party’s mailbox that is set to personal assistant mode.
73
MD Evolution – Dialog 4223 Professional
Voice Mail Services
Personalisation Services for your Mailbox
Whether you consult your voice mail from your own extension, a third
party set, or from an external network, once you are connected to
your mailbox’s consultation menu, the services offered to you for
personalising your mailbox are always the same.
To do so, while listening to your mailbox consultation menu:
* z
Begin by dialling “*”.
You will then hear the personalisation menu for your mailbox.
This menu will present the various services that are available for
personalising your mailbox. You may listen to it in its entirety, or
interrupt it at any time by dialling a service code.
Note: The personalisation menu is repeated up to 3 times if
you do not execute an action when it is being played. It is also
automatically repeated when a service has been success-
fully completed.
The services available for personalising your mailbox are as follows:
1
z
Dial “1” to manage your greeting message.
This applies no matter what operating mode your mailbox is set to,
and allows you to manage the first message that callers who are
directed to your mailbox will hear.
A new menu is therefore played, which prompts you to:
•
•
Dial “1” to listen to the greeting that is currently saved.
Dial “2” to record your new greeting. The maximum length for a
greeting is 3 minutes. You may end the recording by dialling any
code, or by remaining silent for 8 seconds.
•
•
Dial “3” to erase the greeting that is currently saved. It is then
replaced by the default greeting proposed by the voice mail
system, until you record a new one.
Dial “9” to return to the main mailbox personalisation menu.
5
6
z
z
Dial “5” to manage your answering message.
This especially applies if your mailbox is managed in answering
mode. If that is the case, this command enables you to manage
the message that is typically an absence message played after
your greeting message for callers directed to your mailbox.
A new menu is then played, offering you the same services as for
recording your greeting message, as described above.
Dial “6” to manage your personal assistant service.
This especially applies if your mailbox is managed in personal
assistant mode.
74
MD Evolution – Dialog 4223 Professional
Voice Mail Services
A new menu is therefore played, which prompts you to:
•
Dial “1” to hear the number currently saved for your personal
assistant. This information is played back for you through voice
synthesis, one digit at a time.
•
Dial the sequence: “2 <Personal assistant number> #” to save
your personal assistant’s number. It may consist of an internal
or external number, containing up to 18 digits, including the
external network access prefix.
•
•
Dial “4” to erase the number currently saved for your personal
assistant. It is then replaced by a number for a facility attendant.
Dial “9” to return to the main mailbox personalisation menu.
2
z
Dial “2” to manage a possible external notification for
messages left in your mailbox.
This especially applies if your mailbox is managed in recording or
personal assistant mode.
A new menu is therefore played, which prompts you to:
•
•
•
Dial “1” to hear the number currently saved for external noti-
fication. This information is played back for you through voice
synthesis, one digit at a time.
Dial the sequence: “2 <External recipient number> #” to save
your external notification recipient number. It may contain up to
18 digits, including the network access prefix.
service. If the service was initially inactive, it will be activated,
and vice versa. Deactivating the service has no impact on the
recipient number for the service that is reputed and remains
programmed.
•
•
Dial “4” to erase the number currently saved for external noti-
fication.
Dial “9” to return to the main mailbox personalisation menu.
4
3
z
z
Dial “4” to manage your user password.
Your user password is the some as the one to access your mailbox
and activate or deactivate certain services from your extension. Usu-
ally, you define this from your extension – see the “Programming Your
Extension” section. You may also manage it through your mailbox.
By default, it is set to “1234”. You may replace it with any other 4-
digit code.
Dial “3” to protect your extension from calls sent from an
automated attendant (AA).
If the service was initially inactive, it will be activated, and vice
versa.
75
MD Evolution – Dialog 4223 Professional
Voice Mail Services
A voice message left for a group is automatically un-notified on
your extension, as soon as you consult it, just as it would for an
individual message.
The only particularity is that a global denotification of a “common”
message of this type will only take place after each member of the
hunt group has consulted it.
Common Mailbox for a Mailing List
Independent of any hunt group notion, you or your internal calling
parties may be assigned to a common mailbox for a mailing list in
addition to your (their) individual mailbox.
This enables a user to initiate a voluntary distribution of a voice
message to the members associated with the common mailbox
for a mailing list.
For example, a common mailbox associated with a department
would enable the department manager, any other member of the
department, or even a third party to voluntarily distribute a voice
message to all department members, to, for example, call a
meeting.
Access to this type of common mailbox for a mailing list is gained
through the automated attendant usually implemented and associ-
ated with a system’s integrated voice mail system, even when an
automated attendant’s functions are not effectively used.
After lifting the handset or in handsfree mode, to access this service:
885
z
Dial the number for your company’s automated attendant
(AA).
Usually, the internal number for the automated attendant is 885. If
you need more information, contact your system administrator.
You are then connected to the automated attendant’s voice menu.
8
z
z
Dial “8” in order for your call to be transferred to voice mail.
“8” is the code used to access the area for leaving voice mail
through the automated attendant.
MAILBOX NO
Dial the number for the common mailbox for a mailing list you
wish to access.
Always beginning with a “0”, the number for a common mailbox
may vary from 0002 to 0999.
You may then leave your message before ending your call.
77
MD Evolution – Dialog 4223 Professional
Voice Mail Services
As with a message addressed to a hunt group, this message will then
be distributed and notification will be sent to all of the members asso-
ciated with the common mailbox for a mailing list, in usual fashion.
Each member may then consult it through his/her individual
mailbox. This is carried out in the same way as for an individual
message, with the same processing services available. There is
no distinction in your mailbox between individual messages and
mailing list messages.
A mailing list voice message is automatically un-notified on each
extension, as soon as each member consults it, just as with an
individual message.
Once again, the only particularity is that a global denotification of
a “mailing list” message of this type will only take place after each
member of the common mailbox has consulted it.
Notes:
On a standard system, there may be up to 16 common mail-
boxes, each with the capacity to include up to 32 members
or individual mailboxes. One individual internal user may be
associated with several common mailboxes.
The procedure is applicable from an external network; instead
of dialling 885, you would dial the DID number for the auto-
mated attendant. It is also applicable for leaving a message
in an individual mailbox, without having to call the party.
Attendants’ Common Mailbox
Your facility’s attendants also have a common mailbox dedicated
specifically to them, which they share.
Its purpose is to receive – when the attendants are absent – call
forwards of general calls that are ordinarily processed by the
attendants, typically when your facility is set to night mode.
This common mailbox is also accessible voluntarily. Its number is
0001.
This common mailbox is distinct due to the fact that when a voice
message is left, all of the attendants’ extensions are notified; however,
when one of them consults the message, all of the extensions are
globally un-notified.
78
MD Evolution – Dialog 4223 Professional
Voice Mail Services
Integrated Web Server and Unified
Messaging
According to the configuration of your telephone facility, you may
also have access to two PC applications that offer even more user-
friendly management of your integrated voice mail services.
The first application, called Integrated Web Server, opens the
integrated voice messaging system for your telephone installation
within your company’s IT network.
In practice, this enables you to consult the messages left in your
mailbox directly from your Multimedia desktop PC. The charac-
teristics for each voice mail left are displayed in real time.
You may also listen to each voice message using your Multimedia
PC sound card, and then erase the voice message after you’ve
listened to it.
You also have access to all of your mailbox’s personalisation
services directly from your desktop PC, including its general
operating mode. All of this is carried out completely interactively
with the integrated voice mail system.
Note: Access to your Integrated Web Server is controlled
by entering your extension number and user password.
The second additional application is called Unified Messaging. Its
purpose is to merge your facility’s integrated voice mail system with
the e-mail system that is usually present within your company’s IT
network.
In practice, this application provides an e-mail notification to your
desktop PC each time a voice message is left in your mailbox, in
addition to the usual notification methods on your telephone exten-
sion.
With this application as well, you may listen to a voice message
through your Multimedia desktop PC sound card.
79
MD Evolution – Dialog 4223 Professional
Voice Mail Services
You may also use your PC to control your telephone extension to
process each voice message, or even to return a call to someone
who left you a voice message.
You then have access to all of the methods available for person-
alising your use of Unified Messaging. Most notably, you may
manage the voice message e-mail notification address, which
– on occasion – could be a laptop remotely connected through the
Internet.
Notes:
Whenever necessary, contact your system administrator for
more information concerning the availability of one or both
of these applications for your telephone facility.
The Integrated Web Server application may also offer you
access to the internal and external directories for your
company, through your desktop PC. With just one click of
the mouse, you can place calls to anyone.
80
MD Evolution – Dialog 4223 Professional
Group Services
Group Services
Most of the time, you will be working as a team – within a depart-
ment, for example. Your extension offers you different additional
services designed specifically for working as a team.
First of all, it provides the option of supervising your colleagues’
extensions, thus ensuring comprehensive call coverage. You may
also very simply call a colleague or intercept calls for each other.
Secondly, your extension may also be part of a hunt group – within
your department or another department – that calling parties may
call whenever they need to, not just to contact you personally, but
to contact someone within your department.
Your extension provides a simplified call pick-up service within a
hunt group. It also offers you the option of managing your own
participation in this service within the group. This is also referred to
as the In/Out status management within a group.
If you have been designated as the supervisor of a hunt group, you
have the ability to open and close the hunt group according to your
department’s business hours.
Your extension may also offer you a broadcast group service,
which would enable you to send
81
MD Evolution – Dialog 4223 Professional
Group Services
Extension Supervision and Associated
Services
As already indicated (see the “Operations for Outgoing Calls”
section), you may also save numbers for your favoured parties on
any of your extension’s 4 programmable line keys, or any of the
repertory keys available on one or several associated satellite key
panel(s), where applicable.
The corresponding programming of each line or repertory key is
entirely up to you. See the “Programming Your Extension” section.
This enables you to very simply place a call to one of your favoured
parties by pressing the corresponding line or repertory key.
If the number saved corresponds to one of your colleagues, the LED
for the same line or repertory key allows you to remotely supervise
his/her extension, most particularly when the said extension is asso-
ciated with a repertory key (and vice versa). Thus:
Rx
Rx
Rx
Ô
ÖÔ
ÕÔ
The repertory key’s LED is off when the extension you are supervising
is free. This is also true for an extension that is supervised on a line
key.
The repertory key’s LED flashes when the extension you are super-
vising is ringing. If the remote extension is supervised by a line key,
the LED will be continuously lit, however.
The repertory key’s LED is on when the extension you are
supervising is busy. This is also true for an extension that is
supervised on a line key, however there will be no distinction of the
remote extension’s ringing status.
This ensures mutual coverage of your calls.
It simplifies call pick-up, with or without initial presentation, since
all a user needs to do is press the corresponding line or repertory
key, instead of dialling the remote extension number. See also the
“Operations for Incoming Calls” section.
Hunt Groups
Your extension may be part of a hunt group for which the purpose
is to distribute calls among the members of your department or
other group.
A call received on your hunt group number will then be automatically
directed to an extension within the group that is free – such as your
own – according to predefined distribution criteria. Generally, this
criteria is established to ensure even distribution of calls between
the various members of the group.
82
MD Evolution – Dialog 4223 Professional
Group Services
The presentation of an incoming call for your group is therefore
carried out just as it would for an individual call presented on your
extension – see the “Operations for Incoming Calls” section.
As a result, you have access to all the same processing services as
you would for your personal calls.
If you do not answer your hunt group call within a typical 30-second
timeframe, it may be presented to a different extension in your group
that is free. The call may also be directed to a third party set or other
overflow group, such as your facility’s attendants. Depending on
the definition for each hunt group, the call may also be re-directed
to a dissuasion message.
If all of your hunt group’s members are busy, a call that is
presented, as the case dictates, may be directed to a third party
set or other overflow group, such as your facility’s attendants.
Alternatively, depending on the definition of each group, the call
may be placed in a call waiting queue to await a member of the
group to be free, or directed to a dissuasion message.
This extension, overflow group or dissuasion message may also be
solicited when your group is closed, unless a specific call forward
for the entire group was defined by the hunt group supervisor (see
details to follow).
In practice, you may be part of several hunt groups. One hunt
group is then established as your primary group, while the others
are considered to be secondary.
Your primary group has a processing priority feature. Therefore,
when there are several different calls presented on the various
groups of which you are a part, those for your primary group will
take precedence.
The calls presented on your secondary groups are also automatically
managed by the system, but without any particular priority.
Notes:
It is your system administrator’s job to define how each
hunt group will operate. It is also the system administrator’s
responsibility to define to which hunt group(s) you will be
assigned, and which one will be your primary group.
Your facility may contain up to 16 hunt groups.
83
MD Evolution – Dialog 4223 Professional
Group Services
Simplified Call Pick-Up within a
Hunt Group
When you belong to one or several hunt group(s), you have access to
the same call processing services for calls bound for these groups
as you would for managing your personal calls.
Your extension also offers a simplified call pick-up service within
each hunt group, which enables you to answer any call that is
ringing on an extension that belongs to one of your groups, without
having to move to that extension or dial its extension number.
To do so, after lifting the handset or in handsfree mode:
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
PICKUP
Press the dynamic function key shown on the left.
FRI 20-APR 15:28
L1 Pick up _
GENERAL
MAIN_GRP
SEC_GRP
DEFLECT
DEFLECT
Press the dynamic function key shown on the left until if you
wish to have call pick-up presented to you.
Otherwise, proceed directly to the next step.
FRI 20-APR 15:28
L1 Deflection _
GENERAL
MAIN_GRP
SEC_GRP
MAIN_GRP
SEC_GRP
Press the dynamic function key shown on the left to pick up
a call presented to your primary group.
Or,
Press the dynamic function key shown on the left to pick up
a call presented to one of your secondary groups.
In either case, depending on whether or not you requested prior
presentation of call to be picked up, you will be directly connected
to the caller of the picked up call, or the call will be presented to
you through one of your extension’s line keys, which will begin to
flash.
84
MD Evolution – Dialog 4223 Professional
Group Services
In the second case:
L1
Ô
Press the flashing line key corresponding to pick up the call.
Notes:
The simplified call pick-up described above applies only
if the call that is picked up is for the group involved, or a
personal call for a member of the involved group.
If several calls are ringing within the same group, the oldest
call will be automatically selected. If several calls are ringing
within different secondary groups, the call that is picked up
will be automatically selected by the system.
Your extension may also be subject to call pick-ups from
third party sets that belong to the same group as you.
Standby Status within a Hunt Group
When you belong to one or several hunt groups, you may also
manage your availability for answering calls that are directed to
your group(s).
This standby service enables you to temporarily withdraw from a
hunt group. Therefore, you would only receive personal calls, or
those that are directed to the groups from which you have not
withdrawn.
Once again, the system distinguishes your position in relation to
your primary group as well as your secondary groups.
To manage your primary group standby status:
Menu
Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
Programming
disabled
LOCK
disabled
enabled
disabled
GEN_CALL GROUP
CALL_FWD
>
GROUP
Press the dynamic function key shown on the left.
í
Press the “C” key to end the programming.
If your extension was initially “enabled” within your primary group
– as shown above the function key’s label, your extension will now
change to Standby status.
85
MD Evolution – Dialog 4223 Professional
Group Services
On the other hand, if your extension is on standby – shown by the
“disabled” status above the function key’s label – it will then return
to “enabled” status within your primary group.
When your extension is on standby within your primary group, its
status is represented on your idle extension with an “S” displayed
on the first line of the screen.
FRI 20-APR 15:28
S
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
Your standby status within secondary groups is managed through
dialling, for all of your secondary groups as a whole.
From your idle extension:
SEC. IN/OUT
z
Dial the prefix for setting your extension to standby within
secondary groups.
This varies from one facility to another. You may consult the guide
integrated within your extension in order to find the prefix that has
been defined for this purpose for your facility. See the “Programming
Your Extension” section.
A confirmation that the service was accepted is provided both
visually and audibly; the “Accepted Service” message is displayed
on the screen, and the service acceptance tone is played.
í
Ô
Press the “C” key to end this service.
If your extension was active, it will now be on standby within all of
your secondary groups.
On the other hand, if your extension was on standby, it will now be
active within all of your secondary groups.
Lx IN/OUT
Notes: You may also program these standby services for
your primary and secondary groups on your extension’s pro-
grammable line keys, or the repertory keys on any associated
satellites. In this case, activating or deactivating standby
would be carried out by pressing the corresponding key.
The associated LED status reflects your standby status: an
LED that is lit indicates standby, and an LED that is turned
off indicates that your extension is active in relation to the
involved group(s).
You may also place your extension on standby within your
primary group by dialling “68”. This prefix may, however,
have been modified by your system administrator.
You may place your extension on standby at any time, even
if you are the last active member of a group. Your status is
managed completely independently from the opening and
closing of traffic for a specific group, which is the sole
responsibility of the hunt group supervisor (see details to
follow).
86
MD Evolution – Dialog 4223 Professional
Group Services
Opening/Closing a Hunt Group
You may be designated as a supervisor for one or several hunt
This is established by a right that is assigned specifically to you by
your system administrator.
In relation to this (these) hunt groups for which you are in charge, it
is your responsibility to:
•
Open and close each hunt group to traffic, according to the
members’ business hours.
•
Manage a possible variable call forward for calls directed to the
group when it is closed.
exclusively to an internal user, to a different hunt group, or to your
system’s integrated voice mail system, if it exists (see the “Voice
Mail Services” section).
The call forward will then replace a possible fixed call forward to an
overflow group, or a dissuasion message that may be pre-defined
in terms of each group’s configuration.
To open or close traffic to a hunt group, from an idle extension:
GRP. IN/OUT
GROUP NO
z
z
Dial the prefix to open/close hunt groups.
This varies from one facility to another. You may consult the guide
integrated within your extension in order to find the prefix that has
been defined for this purpose for your facility. See the “Programming
Your Extension” section.
Next, dial the internal number for the involved hunt group.
A confirmation that the service was accepted is provided both
visually and audibly; the “Accepted Service” message is displayed
on the screen, and the service acceptance tone is played.
í
Press the “C” key to end this service.
If the hunt group was previously open to traffic, it then progresses
to a closed status, and will no longer accept calls.
On the other hand, if the hunt group was previously closed to traffic,
it then progresses to an open status, and will now accept calls.
When your primary group is closed, its status is represented on
each member’s idle extension with a “C” displayed on the first line
of the screen.
FRI 20-APR 15:28
CS
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
87
MD Evolution – Dialog 4223 Professional
Group Services
Managing a possible variable call forward for a hunt group when
it is closed is carried out according to the “Follow me” or “Third
Party Call Forward” procedures (see the “Call Forwarding Services”
section).
Simply dial the hunt group number instead of the extension number
to forward, and designate the internal call forward recipient as the
extension or hunt group you desire, or the access number for the
voice mail system.
This is carried out without having to enter a user password.
A call forward defined in this manner is only effective when the
involved hunt group is closed.
Lx IN/OUT
ÕÔ
Notes:
From any extension, the sequence <GRP. IN/OUT>
<GROUP NO> may be saved on as many of your ex-
tension’s programmable line keys or associated satellite
repertory keys as necessary. In this case, opening and
closing each involved hunt group is indicated by the status
of the corresponding key’s LED: if it is off, the group is
closed; if it is on, the group is open.
Only a supervisor may manage this open or closed group
status by pressing the corresponding key.
Viewing the Number of Calls in an ICD
Group Call Waiting Queue
If you are a member of one or several ICD-type hunt group(s), your
extension will display the number of calls in the call waiting queue
for these ICD groups.
The first digit displayed at the end of your extension’s first line indi-
cates the number of calls currently being processed in your primary
ICD-type group. As the case dictates, the second digit displays the
total calls in the waiting queue for all of your secondary ICD-type
groups.
They are replaced by “*” if the number of calls in the waiting queue
is equal to or greater than 10. If there are no calls in the waiting
queue, nothing is displayed.
This data is constantly updated in terms of the traffic flow, and is
provided to you, even when you are on standby within the involved
groups.
FRI 20-APR 15:28
3 1
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
88
MD Evolution – Dialog 4223 Professional
Group Services
Broadcast Groups
Independent of any hunt groups to which you belong, you may
belong to one or several broadcast group(s); or similarly, you may
have a specific right to send announcements to one or several
broadcast group(s).
The broadcast service is an optional service, which, when initially
requested, enables an authorized user to send a voice page to a
group of digital extensions that are equipped with a loudspeaker
and who belong to the given pre-defined broadcast group list.
The extensions targeted for this voice announcement are all free
will be automatically activated.
This broadcast is always unidirectional. Microphones on any
remote extensions are never activated. The parties contacted do
not have the option of answering the announcement broadcasted,
in order to begin a conversation with the originator.
To use this service, after lifting the handset or in handsfree mode:
N0 BRD GRP
z
Dial the number for the broadcast group you wish to contact.
Depending on the broadcast group, this number varies from one
facility to another. You may consult the guide integrated within your
extension in order to find the number(s) that has (have) been de-
fined for this purpose for your facility. See the “Programming Your
Extension” section.
Your extension displays the number of extensions within the broad-
cast group that receive your announcement.
BROADCAST IN PROGRESS :
L1 77
DTMF
5
0:12
INFO_COMM CALL_PARK
>
Next, you may broadcast your voice page that will be heard over the
loudspeaker on each free extension within the broadcast group.
d
or
í
Replace the handset, or press the “C” key to end this service
in handsfree mode.
89
MD Evolution – Dialog 4223 Professional
Group Services
Notes:
Typically, the time limit for this service is 20 seconds. After
this time limit expires, the service is automatically ended,
whether you are the requestor, or whether your extension is
part of the targeted broadcast group.
It is your system administrator’s job to define to which
broad-
cast group(s) you belong. This is also the case in relation to
the specific right necessary for initiating a broadcast to any
group whatsoever, whether or not you belong to it.
Your facility may have up to 5 broadcast groups, each of
which may contain up to 32 members
Personal Group Services
While it’s not really a group service, you also have access to a
personal group, which is designed for grouping various extensions
that may be assigned to you (up to 5 extensions) – for example,
your Dialog 4223 Professional extension, and a DECT cordless
phone.
The specific services offered to you are as follows:
•
You can be contacted through just one number, common to
your entire personal group.
•
When you place a call to any party, you are identified by your
personal group number, no matter what extension you use to
place your call.
•
An incoming call is presented on all of your personal group’s
extensions, allowing you to answer it on any of them. If all
extensions in your personal group are free, they will all ring
simultaneously. If you have an ongoing call on any given
extension, the call is presented to you on that extension in
the usual way (call waiting tone, etc.) On each of the other
extensions – when it is possible – the call will be presented
with silent ringing, a line key will flash, and the usual call
information will be displayed on the screen.
•
You have the option of carrying out a simplified call transfer
between extensions within your personal group (other than from
a Dialog 4425 IP Vision or Dialog 4422 IP Office extension). To
do so, simply place your current call on hold and replace. The
call is then represented on all of your personal group extensions;
therefore you may pick it up on any of them.
90
MD Evolution – Dialog 4223 Professional
Group Services
Notes:
It is your system administrator’s responsibility to define your
personal group. Contact him/her as needed.
On your Dialog 4223 extension, a call may be placed on
hold by pressing the line key associated with the current
call. On a DECT cordless extension, a call is placed on hold
by pressing the “R” key.
91
MD Evolution – Dialog 4223 Professional
Group Services
Mobile Extension Service
If you frequently travel outside the office, you will generally have a
GSM mobile phone in addition to your Dialog 4223 Professional
extension.
Once again, without truly being a group service, the Mobile
Extension service may be of use to you. Its purpose is to allow
external users – of GSM mobile phones most particularly – to
access your company’s network, and thus be able to use the
system as if they were internal users.
In practice, a Mobile Extension terminal is managed in the same
way as a dummy internal user associated with the external GSM
mobile number.
To process these calls, the GSM mobile telephone connects to a
specific DID number for the facility, which accesses the Mobile
Extension server.
By connecting through the public ISDN network, the GSM mobile
telephone is then automatically authenticated by its external calling
number. By default, authentication can be carried out by manually
dialling the dummy internal number associated as well as the
corresponding user’s password.
Once authenticated, the GSM mobile telephone user may call any
internal or external number, just as if he/she were dialling from the
internal dummy extension. The user’s identity that is transmitted to
the called parties is the information for the internal dummy extension.
The mobile GSM telephone user may, in the same way, gain access
to all telephone services to which the internal dummy extension has
authorisation to access.
The GSM mobile telephone may also be directly called through the
number associated with the internal dummy extension. This may
be used in conjunction with a personal group. However, the GSM
mobile telephone will still retain its regular number.
Note: The Mobile Extension service is also totally applicable
to your residential extension connected to the pubic ISDN
network. Whenever necessary, contact your system admin-
istrator for more information concerning the availability of
this specific service for your telephone facility.
92
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
More Features of Your Extension
Your extension may also offer you, depending on your user rights,
other services that are geared toward improving your productivity,
securing the use of your telephone, or just making its use even
more enjoyable.
Within this context, the following services are offered:
•
Locking service: You may lock your extension when you are
absent, preventing any third party from using it.
•
Appointment reminder service: You may request that the system
call you at a specified time, in order to remind you of a meeting,
etc.
•
Background music service: Depending on your user rights, you
may request that background music be played over your idle
extension’s loudspeaker.
Other specific services may also be offered, depending on the
rights assigned to your extension, or your facility’s configuration.
More specifically, your extension may also provide you with the
means to control your external ISDN call costs.
Locking Your Extension
When you are absent, you can lock your extension, restricting its
use by any third party.
When your extension is locked, it is impossible to access the
external network. Only the external emergency numbers may be
dialled – typically 15, 17, 18, and 112.
It remains impossible, however, to place internal calls and/or
receive any type of call whatsoever.
Your personal data – your extension’s programming data and call
log file – cannot be accessed. Access to the services usually offered
by your extension may also be restricted.
93
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
To lock your extension, when it is idle:
Menu
Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
Programming
enabled
disabled
disabled
LOCK
disabled
GEN_CALL GROUP
CALL_FWD
>
LOCK
Press the dynamic function key shown on the left.
You will receive confirmation of the activation of this service.
í
Press the “C” key to end the programming.
If your extension was initially “disabled” with regards to the locking
service – as shown above the function key’s label – your extension
will now be locked.
Your extension’s locked status is also indicated on your idle
extension by the letters “locked” displayed on the second line of
the screen.
You will hear a specific voice announcement each time you lift your
handset or attempt to place a call in handsfree mode. By default,
the message is: “Your set has been locked. To make a call, you
must unlock it”.
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
lock
PICKUP
NAME
>
When you return to your extension, to unlock it, when it is idle:
Menu
LOCK
Press the Menu key.
Programming
enabled
LOCK
Press the dynamic function key shown on the left.
Your extension prompts you to enter your user password.
FRI 20-APR 15:28
Password _
PASSWORD
z
Enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension” section.
You will receive confirmation of the de-activation of this service.
94
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
í
Press the “C” key to end the programming.
If your extension was initially “enabled” with regards to the locking
service – as shown above the function key’s label – your extension
will now return to unlocked status.
Note: When your extension is locked, it then has access
only to a specific class of services. It is the definition of this
class of services that determines which rights remain available
on your extension. Contact your system administrator for
more information.
Appointment Reminder
The appointment reminder service enables you to ask the system
to automatically remind you at a specified time that you define
within 24-hours of your appointment.
To activate an appointment reminder, from an idle extension:
Menu
>>
Press the Menu key.
Press the Next or >> key to display the following Programming
screen on your extension:
Programming
AGENDA
DIRECTORY
LINES
RING+SPKR
>
AGENDA
Press the dynamic function key shown on the left.
Your extension prompts you to enter the time for your appointment
reminder.
Appointment reminder prog
Hour/Minute : . . : . .
BLANK
CONFIRM
RETURN
HH MM
z
Enter the hour (00—23) and minutes (00—59) for your appoint-
ment reminder.
CONFIRM
Press the dynamic function key shown on the left to validate
your programming.
Your appointment reminder request is saved.
í
Press the “C” key to end the programming.
95
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
At the set time for your reminder, your extension will automatically
ring.
L2 APPOINTMENT
REDIAL
CALLERS
PICKUP
NAME
>
u
or
ÖÔ
Lift the handset, or in handsfree mode, answer the call in the
usual manner.
A confirmation voice message is then heard. By default it is: “It’s
time for your appointment”.
Notes:
You have 30 seconds to answer the appointment reminder.
After this timeframe, the reminder will be automatically can-
celled. If your line is busy when the appointment reminder
comes through, it is presented to you just as a normal call
would be, or if that is not possible, it is automatically cancelled.
An appointment reminder automatically overrides any call
forward on your extension.
You may verify whether or not an appointment is currently
programmed on your extension through the “AGENDA”
Menu function. The time is then displayed. You may cancel
it, if necessary, using the “BLANK” function key.
Background Music
Based on a specific user right that may be assigned to your exten-
sion, you may request that background music be played over your
idle extension’s loudspeaker.
Depending on your facility’s configuration, you may then select one
of 6 background music selections.
Once the broadcast has been activated, the background music
selected will be heard whenever your extension is idle. However, it
will be automatically interrupted when an incoming call is presented
to you on your extension, or when you place an outgoing call. At
the end of your call, the background music will be played once
again.
96
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
To activate or deactivate the broadcast of background music on
your extension, after lifting the handset or in handsfree mode:
MUSIC BRD
MUSIC NO.
z
z
Dial the access prefix for the background music service.
This varies from one facility to another. You may consult the guide
integrated within your extension in order to find the prefix that has
been defined for this purpose for your facility. See the “Programming
Your Extension” section.
Next, dial a number from 1 to 6, which corresponds to the
desired background music.
d
or
í
Replace the handset or press the “C” key in handsfree mode.
The broadcast is activated if it was previously inactive; on the other
hand, it is cancelled if it was previously active.
Notes:
You can change the type of background music while the
service is active. To do so, repeat the procedure, selecting
a different type of background music.
You can control the volume level for the background music.
To do so, simply adjust the volume for your extension’s
loud-
speaker. See the “Programming Your Extension” section.
Hot Line Call to Attendants
According to a specific right assigned to your extension, you may
also be allowed to take advantage of the hot line call to attendants
service.
In this case, whether in handset or handsfree mode, a call to your
facility’s attendants will be placed when your phone has been off
the hook for a typical delay of 0.8 seconds, without any action
required on your part.
You still have the option of calling any internal or external party by
dialling a number (or any other equivalent action) before this time-
frame expires.
97
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
Protection against External Calls Being
Re-Routed to Attendants
Usually, your external calling parties can contact you from external
network(s), directly through your direct calling numbers, or DID
numbers (Direct Inward Dialling).
They may also contact you through your facility’s general number.
In this case, your incoming external calls are directed through your
facility’s attendants.
An external call is presented to you whether your extension is free or
busy. If it is busy, it will usually be automatically placed on camp-on
for your extension (unless your extension is equipped with specific
protection against such).
If you do not respond to an external call, after a typical delay
of 30 seconds, the call is directed (or returned) to your facility’s
attendants for processing.
Following the specific rights assigned to your extension, you may
have access to protection against your external calls being directed
to your facility’s attendants.
This protection may be manifested by:
•
•
•
Restricted protection on no-answer condition: external calls
presented on your extension when its status is “free” will then
ring continuously, without a time limit, until you answer it, or
the caller ends the call.
Restricted protection on busy condition: external calls presented
on your extension when its status is “busy” will remained on
camp-on, without a time limit, until you answer it, or the caller
ends the call.
Extended protection: this combines the two previous cases.
In all cases, this protection against the re-direction of your calls to
the automated attendant is never dependant upon any action on
your part.
98
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
Secret of Identity
When your facility is connected to the ISDN network, your identity
is usually transmitted to your external calling parties, and vice
versa.
According to the specific right assigned to your extension, it is
possible that your identity not be divulged to your external ISDN
network calling parties.
This is therefore systematically valid for all of your outgoing ISDN
network calls, without any specific action on your part.
Your identity is divulged, however, for your internal calls, and you
still receive the information concerning your external incoming
calling parties.
Tracing Malicious Calls
It is possible that at some time, you may be subjected to malicious
calls from external parties (usually received from an ISDN network)
who hide their identity. See the “Operations for Incoming Calls”
section.
When your facility is connected to the ISDN network, you may
request that these malicious calls be traced, thus finding out the
malicious caller’s name and number, and that this information be
saved on the public network.
This assumes, however that you have made a prior request to the
operator responsible for the public network to which your facility is
connected.
Assuming this condition has been met, requesting a malicious call
tracing may be carried out on an established call, whether in single
or enquiry mode, as well as when the call is being disconnected by
the remote malicious caller.
To do this, during a call:
2 times >>
MALICIOUS
Press the Next key twice in order to display the following
screen:
FRI 20-APR 15:28
L1 Aastra-00164477500
01:33
MALICIOUS
RECORD
<
Press the dynamic function key shown on the left.
Your request for malicious call tracing is transmitted over the ISDN
network, and the call proceeds normally.
If the call is being disconnected by the remote caller, all you need to
do is disconnect the call yourself.
99
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
Conversation Recording
If your telephone system is equipped with “Integrated Voice Mail”,
and you have a “Mailbox”, the conversation recording service
allows you to record any telephone conversation so that you may
then subsequently be able to listen to it from your “Mailbox”.
The recorded conversation is then processed just as any voice
message left in your mailbox (see also the “Voice Mail Services”
section).
To begin recording a conversation, after informing your caller:
2 times >>
RECORD
Press the Next key twice in order to display the following
screen:
FRI 20-APR 15:28
L1 Aastra-00164477500
01:33
MALICIOUS
RECORD
<
Press the dynamic function key shown on the left.
Your conversation recording is started; recording time is not limited.
According to the configuration of your telephone system, an intrusion
tone may periodically sound, reminding the user that the conversa-
tion is still being recorded.
You may stop the current recording and then re-start it by re-starting
the entire procedure.
Notes:
Recording a conversation without your caller’s prior
consent may be illegal, as may be sending this recording to
a third party.
The initiator must absolutely request the caller’s consent
prior to beginning the recording, at the conclusion of the
recording, and for any subsequent use of the recording.
Compliance with the law is the exclusive responsibility of
the user; any violation may be subject to legal action.
Neither the manufacturer nor the distributor may be held
responsible for any abusive use of this function by the user,
or by any other damage that may result.
This service is available for a single call in progress, as well
as a broker’s call, for which you may record each portion of
the conversation with one or all of your calling parties.
100
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
Controlling Your External Call Charges
During any type of communication, your extension systematically
displays the elapsed call time for the current call.
If your current call is an external outgoing call over the public ISDN
network, it also usually displays the cost for the current call.
According to your public telecommunications exchange, the display
of charging or Advice Of Charge (AOC) data may be received during
the course of each call – the AOC_D service – or may be received
cumulatively at the end of each call – the AOC_E service.
Whenever available, the cost of a call is displayed in Euros, as
shown on the following screen:
FRI 20-APR 15:28
L1 Aastra 00164477500
DTMF
EUR 1.15
05:33
INFO_COMM CALL_PARK
>
You may request that it be displayed in Francs. To do so:
INFO_COMM
Press the dynamic function key shown on the left.
The following screen will be temporarily displayed, and then the
previous screen will be re-displayed.
FRI 20-APR 15:28
L1 Aastra 00164477500
DTMF
FF 7.54
05:34
>
INFO_COMM CALL_PARK
You may also verify the cumulative costs for external calls imputed
to your extension. To do so, from an idle extension:
Menu
Press the Menu key.
You then access the programming of your extension
2 times >>
Press the Next key twice in order to display the following
screen:
Programming
CALL_FWD PREFIXES
VPAGING
COST
<
COST
Press the dynamic function key shown on the left.
The next screen displayed shows the cumulative amount imputed
to your extension, from the last time the cost counter was cleared
(set to zero).
101
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
This accumulation of charges is iterated in the number of charges
received from the public ISDN network, as well as the total cost,
expressed only in Euros.
420 ROUSSET Jean-Luc
CHARGES = 85
COST = 8.50 EUR
RETURN
Once you have completed your consultation:
í
Press the “C” key.
Your extension returns to idle status.
Notes:
Your system administrator or facility’s attendants have the
ability to access all charge counters. They (system admin-
istrator/attendants) are the only ones who may reset the
charge counters to zero. See the “Services Reserved for
Attendants” section.
Your extension may also be subject to call detailed records.
This usually involves your outgoing external calls, however
they may also refer to your internal and incoming calls.
These records save the details for each involved call:
number called, date and time, length, etc. These records
are generally used by your system administrator to monitor
your telephone facility’s invoicing. If necessary, contact your
system administrator for more details.
Account Codes
According to your working mode, you may wish to impute the cost
of your external calls to different accounts. Your telephone system
can do this through account codes that you simply enter when
placing outgoing external calls.
To establish an outgoing external call using an account code, after
lifting the handset or in handsfree mode:
NET. PREF.
z
First, dial the network access prefix adapted to this service.
Generally, this consists of a network access prefix that is reserved
for placing outgoing external calls that are subject to account codes.
Ask your system administrator for this prefix.
102
MD Evolution – Dialog 4223 Professional
More Features of Your Extension
ACCOUNT C.
z
z
Then, directly dial the account code to which your external
call should be imputed.
Account code formats are a fixed length. All account codes are
typically 4 digits, however they may reach up to 15 digits in length.
Generally, they end with “#”, which acts as a separator. In all cases,
account codes are defined by your system administrator.
EXT. NO
Next, dial the desired external phone number.
Your outgoing external call is then transmitted over the public net-
work, just as an external call without an account code would be.
Thus, the call detailed record will not only contain the date, time,
number called, length, and cost of the call, but also the account
code that you entered. This then can be used to invoice your
clients.
Note: The implementation of this specific service assumes
that your facility uses the Least Cost Routing (LCR) method
for external calls. It also assumes that, at the very least, these
outgoing calls are subjected to call detailed records that are
managed within an external charging server. Contact your
system administrator for more information. He/she will also
provide you with the accepted account code format.
103
MD Evolution – Dialog 4223 Professional
Programming Your Extension
Programming Your Extension
You also have options for personalising the configuration of your
Dialog 4223 Professional extension, in terms of how you intend to
use it.
By pressing the Menu key on your extension, you can:
•
Program the 4 programmable line keys on your extension with
your most frequently called internal or external numbers, or with
the services or activation sequences that are most important to
you.
•
•
•
Program the repertory keys on any satellite key panels associ-
ated to your extension, in the same way.
Program your extension’s Call-Fwd key to activate or deactivate
a preferred call forwarding by simply pressing that key.
Adjust the standard listening volume for your extension’s loud-
speaker or handset, as well as the normal ring melody and
volume.
•
Manage the unidirectional or bidirectional characteristics of the
voice pages played on your extension.
numbering plan, in order to facilitate the use of several calling
services accessed by dialling the pre-defined codes.
The Menu key also serves to activate or deactivate specific services
on your extension:
•
The call forward service that enables you to define on a case-by-
case basis, any type of variable call forward from your extension
to a third party set. See the “Call Forwarding Services” section.
•
•
The Standby service that allows you to temporarily withdraw from
your primary hunt group. See the “Group Services” section.
The locking service that enables you to prevent your extension
from being used, in your absence. See the “More Features of
Your Extension” section.
•
The Appointment reminder service that allows you to ask the
system to remind you of an appointment at a pre-defined time.
See the “More Features of Your Extension” section.
104
MD Evolution – Dialog 4223 Professional
Programming Your Extension
•
•
The Cost consultation service that allows you to verify the
cumulative costs for external calls imputed to your extension.
See the “More Features of Your Extension” section.
The General calls acceptance service, when necessary, which
allows you to assist your facility’s attendants. See the “Attendant-
Based Services” section.
Personalising your extension also includes managing your user
password, which is requested when you use certain services.
Accessing Your Extension’s Programming
Mode
When your extension is idle, to access your extension’s
programming mode:
Menu
>>
Press the Menu key.
You then access the programming of your extension.
Press the Next key until the option you wish to program is
displayed on the screen.
The collection of programming mode screens for your extension is
displayed on the next page.
XXXXX
Press the dynamic function key that corresponds to the
option you wish to program.
You may then proceed with programming the selected feature; you
will be prompted to validate at each step (see details to follow).
Programming
disabled enabled
GEN_CALL GROUP
disabled
LOCK
disabled
CALL_FWD
>
>
<
Programming
AGENDA
DIRECTORY
LINES
RING+SPKR
COST
Programming
CALL_FWD PREFIXES
VPAGING
Once you have validated one or all of your setting(s), one of the
screens shown above will be re-displayed.
Then, to exit your extension’s programming mode:
í
Press the “C” key.
Your extension returns to idle status.
105
MD Evolution – Dialog 4223 Professional
Programming Your Extension
Programming Your Extension’s Line Keys
To program internal numbers, external numbers, or service codes on
your extension’s line keys, once you have accessed the
programming mode:
Programming
AGENDA
DIRECTORY
LINES
RING+SPKR
>
LINES
Press the dynamic function key shown on the left.
Select a line key
L3
Ô
Press the line key you wish to program.
L3
Number : _
BLANK
CURSOR+
NEXT
CONFIRM
CALL NO
z
Dial the number to be saved for that line key.
This may consist of an internal or external number, beginning with the
ad-hoc network prefix number (generally 0), or perhaps a service
activation code. The number to be saved may contain up to 18 digits.
L3
Number : 00164477500
BLANK
CURSOR+
NEXT
CONFIRM
CONFIRM
Press the dynamic function key shown on the left.
This saves your setting.
Notes:
You may program line keys one after another using the
“NEXT” function, and by selecting the “CONFIRM” option
when all of the programming is completed. The “BLANK”
and “CURSOR+” functions enable you to delete or modify
the number for existing programming.
In relation to saving service codes on your extension’s line
keys, you may recall that it is useful to save the access
code to the your facility’s integrated voice mail system,
if applicable (884 by default). If you belong to any hunt
groups, saving access codes to the services used within
this context will facilitate the use of your extension within
these groups. See also the “Voice Mail Services” and
“Group Services” sections.
106
MD Evolution – Dialog 4223 Professional
Programming Your Extension
Programming a line key assigns a saved number or service
to this key. Practically speaking, this means that you may
only program 4 line keys, thus typically reserving line keys
1 and 2 for processing incoming and/or outgoing calls
simultaneously.
When programming your extension’s line keys, remember
to modify the respective labels according to your personal
phone book. See the “Installing Your Extension” section.
Programming Your Satellite Key Panel(s)’s
Repertory Keys
To program internal numbers, external numbers, or service codes
on repertory keys on the satellite key panel(s) associated with your
extension (when applicable), once you have accessed the program-
ming mode:
Programming
AGENDA
DIRECTORY
LINES
RING+SPKR
>
DIRECTORY
Press the dynamic function key shown on the left.
Select a directory key
R2
Ô
Press the repertory key you wish to program.
Integrated repertory programming
Key 2 : _
BLANK
CURSOR+ NEXT CONFIRM
CALL NO
z
Dial the number to be saved for that repertory key.
This may consist of an internal or external number, beginning with
the ad-hoc network prefix number (generally 0), or perhaps a service
activation code. The number to be saved may contain up to 18 digits.
Integrated repertory programming
Key 2 : 00164477500
BLANK
CURSOR+
NEXT
CONFIRM
CONFIRM
Press the dynamic function key shown on the left.
This saves your setting.
107
MD Evolution – Dialog 4223 Professional
Programming Your Extension
Notes:
You may program repertory keys one after another using
the “NEXT” function, and by selecting the “CONFIRM”
option when all of the programming is completed. The
“BLANK” and “CURSOR+” functions enable you to erase
or modify the existing programming.
When programming the repertory keys on a satellite key
panel, remember to modify the respective labels according
to your personal phone book. See the “Your Extension’s
Accessories” section.
Programming Your Extension’s Variable
Call-Fwd Key
To program a currently used variable call forward on your
extension’s Call-Fwd key in order to be able to activate or
deactivate the service by simply pressing this key, once you have
accessed the program-
ming mode:
Programming
CALL_FWD PREFIXES
VPAGING
COST
<
CALL_FWD
Press the dynamic function key shown on the left.
Your extension displays the following screens:
Call fwd Immediate
Number : _
IMMEDIATE NO_REPLY
BUSY
NODISTURB >
Call fwd Immediate
NREP+BUSY
<
Press the dynamic function key that corresponds to the desired
type of call forward:
IMMEDIATE
NO_REPLY
BUSY
To pre-define an immediate call forward.
To pre-define a call forward on no-answer condition.
To pre-define a call forward on busy condition.
NREP+BUSY
To pre-define a call forward on no-answer condition and busy
condition.
108
MD Evolution – Dialog 4223 Professional
Programming Your Extension
NODISTURB
To pre-define a Do not disturb call forward (after having pressed
the Next or >> button).
In the first four cases, your extension displays the type of call forward
requested, and prompts you to enter the number for the internal or
external call forward recipient. In the latter case, simply exit your
extension’s programming mode (see previously described details).
Call fwd Immediate
Number : _
BLANK
CURSOR+
CONFIRM
RETURN
FWD NO
z
Enter the internal or external number to receive your call
forwards.
This number may contain up to 18 digits, including the network
access prefix for an external number. An external number may be
one that is accessible through abbreviated dialling.
CONFIRM
Press the dynamic function key shown on the left to confirm
the number you entered.
Your extension’s Call-Fwd key has now been pre-defined. The call
forwarding that you have just programmed will only take effect when
you press the Call-Fwd key. See the “Call Forwarding Services”
section.
Note: The “BLANK” and “CURSOR+” functions enable
you to delete or modify the number for an existing call
forward. The “RETURN” function enables you to exit the
screen without modifying the content.
Adjusting Your Extension’s Ring and
Loudspeaker Volume
Your extension features a selection of 10 different ring melodies,
and 10 ring volume levels in order to better adapt to the acoustics
in your office.
In the same way, your extension also features a loudspeaker that has
11 different volume levels in order to adapt to the various conditions
that arise when communicating in handsfree or loudspeaker mode.
This listening volume level is also applied to the handset.
109
MD Evolution – Dialog 4223 Professional
Programming Your Extension
To program your extension’s melody or ring volume, or to adjust
the listening volume on the loudspeaker or handset, after accessing
the programming mode:
Programming
AGENDA
DIRECTORY
LINES
RING+SPKR
>
RING+SPKR
Press the dynamic function key shown on the left.
The screen shown below is displayed, and your extension will auto-
matically play the currently programmed ring melody and volume.
Ringing programming
Melody : 5
MELODY -
Level : 2
LEVEL -
MELODY +
LEVEL +
>
MELODY -/+
LEVEL -/+
Then press either of the dynamic function keys shown on the
left to adjust your extension’s melody or ring volume.
Your extension will play a different ring each time you press the key.
Or,
Then press either of the dynamic function keys shown on the
left to adjust your extension’s ring volume.
Your extension’s ring volume increases or decreases as you press
the keys.
You may also control the listening volume for your extension’s
handset or loudspeaker.
>>
Press the Next key.
The second screen shown below is displayed, and your extension will
automatically play the dial tone over the loudspeaker, in accordance
with the volume currently programmed.
Loudspeaker level adjustment
LS initial level : 2
LEVEL -
LEVEL +
<
LEVEL -/+
Then press either of the dynamic function keys shown on the
left to adjust your extension’s loudspeaker listening volume.
The volume of your extension’s dial tone increases or decreases as
you press the keys.
í
Press the C key on your extension once you have made all the
desired adjustments.
Your extension returns to idle status.
110
MD Evolution – Dialog 4223 Professional
Programming Your Extension
Notes:
You may also adjust your extension’s melody and ring
volume when an incoming call is presented to you.
Successively press either the + or - key to adjust the ring
volume. Press the key shown on the left as many times as
necessary in order to adjust the ring melody. These
adjustments amend any settings made through the Menu of
your extension’s programming mode, and vice versa.
ì
Â
You may also adjust the listening volume for your
extension’s handset or loudspeaker during an ongoing call.
Press either the + or - key as many times as necessary to
adjust the listening volume. This adjustment is only valid for
the current call. The listening volume defined through the
Menu key when in programming mode remains the
standard listening volume that will be used.
The type of ring that is defined is applicable for both internal
and external calls. These will, however, be distinguished by
different cadences: for example, the cadence is faster for
incoming calls.
ì
Managing the Uni/Bidirectional
Characteristics of Announcements
Received on Your Extension
When an internal calling party attempts to contact you without
success, it is possible that he/she may activate a voice page to
be played when your extension is freed.
He/she may transmit a message that you will hear over your
extension’s loudspeaker. See also the “Operations for Outgoing
Calls” section.
The automatic and simultaneous connection of your extension’s
microphone depends on your choice of services:
•
If you wish to answer a voice announcement without lifting the
handset, you may opt for bidirectional voice announcements on
your extension. The microphone will therefore be automatically
activated at the same time as your loudspeaker.
•
If you wish prevent your voice from being heard when these
announcements are played, you may opt for unidirectional voice
announcements on your extension. Doing so will prevent the
microphone from being automatically activated.
111
MD Evolution – Dialog 4223 Professional
Programming Your Extension
To set the unidirectional or bidirectional characteristic of voice
pages played on your extension, once you have accessed the
programming mode:
Programming
CALL_FWD PREFIXES
VPAGING
COST
<
VPAGING
Press the dynamic function key shown on the left.
Voice paging
STATE : Unidirectional
MODIFY
MODIFY
Press the dynamic function key shown on the left.
The character of voice pages on your extension becomes bidirec-
tional if it was previously unidirectional, and vice versa.
í
Press the C key on your extension once you have made this
adjustment.
Your extension returns to idle status.
Note: This adjustment applies to the voice announcement
you receive. The third party sets who may be the recipients
of voice announcements that you make also have these
options available to them.
Programming Your User Password
You will be prompted to enter your user password when accessing
certain services, most particularly:
•
•
•
When placing a call in substitution or with signature from your
extension or a third party set.
When activating/deactivating a call forward from your extension
or a third party set (Follow me service).
When locking your extension t prevent it from being used by
third parties when your are absent, or when unlocking it upon
your return.
•
When consulting or personalising your mailbox within your
facility’s integrated voice mail system, when applicable.
By default, your user password is “1234”. It is strongly recommended
that you change it to any other 4-digit code to ensure that use of the
aforementioned services is as secure as possible, and to preserve
the confidentiality of your mailbox, when applicable.
112
MD Evolution – Dialog 4223 Professional
Programming Your Extension
To do this, after lifting the handset or in handsfree mode:
79
z
Dial the prefix assigned to the user password management
service.
By default, the prefix is “79”, however this may have been modified.
Your extension prompts you to enter your user password.
FRI 20-APR 15:28
L1 Password _
OLD PSWD
NEW PSWD
z
z
Enter your current user password.
By default, your user password is “1234”, however you may have
modified it; if this is indeed the case, you will need to enter your
current password.
Next, enter your new user password.
It may contain any 4 digits, or the * and # characters. You will
receive confirmation that your new password has been saved.
FRI 20-APR 15:28
L1 PASSWORD REGISTERED
d
or
í
Replace the handset or press the “C” key to end the service
in handsfree mode.
Note: If you ever forget your password, you can request
that it be re-initialised, either by a facility attendant, or by the
system administrator. It will then be reset to “1234” until you
change it once again.
Consulting Your Facility’s Dialling Plan
Your extension’s screen and dynamic function keys will guide you
through the process of carrying out the many services to which you
have access.
However, certain services require that you dial an external access
prefix beforehand, which you obviously will need to remember.
If you forget the prefix, your extension’s Menu key will allow you to
consult the internal dialling plan for your facility.
113
MD Evolution – Dialog 4223 Professional
Programming Your Extension
To do this, once you have accessed programming mode:
Programming
CALL_FWD PREFIXES
VPAGING
COST
<
PREFIXES
Press the dynamic function key shown on the left.
>>
Press the Next or >> key to consult your facility’s dialling
plan:
You may then scroll through your facility’s entire dialling plan.
í
Press the “C” key to end the programming.
114
MD Evolution – Dialog 4223 Professional
Programming Your Extension
The following table lists the services that require an access prefix to
be dialled. It also provides the default values. In the “Actual” column,
you may note any prefixes that have been changed by the system
administrator for your facility, for future reference.
Default
Actual
SERVICES
0
Variable
Undefined
Undefined
9
Access to the public network or main trunk group
Access to the private network or secondary trunk group
Access to other private networks or secondary trunk group
Access to the public network with an account code
Call to attendants or automated attendants
Access to abbreviated dialling
2
75
Call in substitution from a non-IP third party set
Retrieving a parked call from any extension
Activation of “Follow me” from a non-IP third party set
Cancellation of “Follow me” from a non-IP third party set
Call deflection or call forward on a case-by-case basis
Access number for integrated voice messaging system
Access number for automated attendant
Extension standby within a primary hunt group
Extension standby within secondary hunt groups
Hunt group opening/closing
10
65
66
**
884
885
68
Undefined
Undefined
Undefined
Undefined
Undefined
Undefined
79
Broadcast to broadcast group #1
Broadcast to broadcast group #x
Broadcast to broadcast group #5
Activation – deactivation of background music
Change your user password
115
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
Attendant-Based Services
Besides the services that are accessible or that may be assigned to
a Dialog 4223 Professional extension, additional services are also
available for the system’s attendants.
Within this context, the following services are offered:
•
Call offer or intrusion: This service allows attendants to interrupt
an ongoing call to present an urgent call.
•
Do not disturb override service: Similarly, this service allows the
attendant to override the “Do not disturb” status to present an
urgent call.
•
•
•
•
General calls acceptance: This service enables attendants to
control their active or inactive status for processing a system’s
general calls, in relation to their shifts.
Door phone service: Your facility may be equipped with a door
phone; calls from this extension are usually processed by the
attendants.
Call pick-up for a general calls that are ringing: Your facility may
be equipped with a common bell that receives general calls when
the attendants’ lines are congested, or when they are absent.
Complete third party call forward service: This service allows
attendants to define any type of call forward for a user’s
account, without restrictions.
According to the specific rights assigned to your extension, you may
also have access to these attendant-based services.
116
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
Call Offer or Intrusion
The call offer or intrusion service is usually reserved for your
facility’s attendants, enabling them to intervene during an ongoing
call, in order to present an urgent call destined for one of the calling
parties.
According to a specific right assigned to your extension, you may
also have access to the call offer service. In this case, you may also
intervene in an ongoing call to present your call or a call on-hold on
your extension to one of the parties.
When you call a party whose status is busy:
L1 SMITH Peter-405
WAIT
DTMF
>
INTRUSION
CALL_BACK
FLASH
INTRUSION
Press the dynamic function key shown on the left.
You then enter into a 3-way conference call between yourself and
the two parties involved in the ongoing call. Usually, a warning tone
is heard at a regular frequency during this conference call to remind
the parties that they are still under call intrusion status.
You may then present your call to the desired party.
By pressing the line key on which your call is presented, this party
may enter into private conversation with you, as their first call is
placed on hold. He/she may also end the first call, and would then
be re-rung by your call, in the usual manner.
If you have someone on hold on your own extension, you may then
transfer that urgent call in the usual manner.
Notes:
You may also be subjected to this service, which is most
often used by attendants.
Certain extensions (such as yours) may possibly be equipped
with permanent protection against call intrusion. If this is the
case, this service will obviously be refused.
Depending on the configuration for your facility defined by
your system administrator, these services may be used
from specific extensions that are duly authorised, without
any warning tones being emitted. This refers to the Silent
call monitoring service.
117
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
Do Not Disturb Override Service
The Do not disturb override service is usually reserved for your
facility’s attendants, enabling them to override an extension’s Do
not disturb status in order to present an urgent call.
According to a specific right assigned to your extension, you may
also have access to this service. In this case, you may also override
an extension’s Do not disturb status to present your call or a call
on-hold on your extension.
When you call a party who has programmed the Do not disturb
status on his/her extension, (see also the “Call Forwarding Services”
section):
L1 SMITH Peter-405
DO NOT DISTURB
DTMF
OVERRIDE
FLASH
>
OVERRIDE
Press the dynamic function key shown on the left.
Your call is then presented on the extension called, just as with a
normal call (whether the extension called is free or busy).
When your calling party answers, you will enter into communication
with him/her. If you have someone on hold on your own extension,
you may then transfer that urgent call in the typical fashion.
Note: You may also be subjected to this service, which is
most often used by attendants.
General Call Acceptance
The general calls acceptance service is usually used by your
facility’s attendants who are in charge of processing your system’s
general calls – most often the external calls received on your
facility’s general phone number, or external calls redirected when
the internal users do not answer or are busy.
Similar to the standby status that is available when you belong to
hunt groups, the general calls acceptance service enables attendants
to control their active or inactive status for processing a system’s
general calls, in relation to their vacation periods.
According to the rights assigned to your extension, you may also
have access to the general calls acceptance service. This is
generally the case. When necessary, this allows you to assist the
attendants by answering calls when their lines are congested or
when they are temporarily absent.
118
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
When you activate this general calls acceptance service on your
extension, not only will you receive your personal calls, but also
your facility’s general calls.
These will be presented to you in the same way as usual, with the
external calling party’s information displayed on your screen. See
the “Operations for Incoming Calls” section.
You will, however, be able to distinguish them from your personal
calls with a specific message such as:
•
•
•
I. DIRECT or I. UNUSED NUMBER for a call received on your
facility’s general number, or on non-assigned DID numbers,
I. NO ANSWER FROM <Name> for a call re-directed when an
identified internal user does not answer,
I. BUSY ON <Name> for a call re-directed when an identified
internal user’s line is busy.
You may then process each call just as you would one of your
personal calls.
L1 Aastra-00164477500
I. NO ANSWER FROM SMITH Peter-405
REDIAL CALLERS PICKUP
GC
2
NAME
>
To activate or deactivate the general calls acceptance service on
your extension, from an idle extension:
Menu
Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
Programming
disabled enabled
GEN_CALL GROUP
disabled
LOCK
disabled
CALL_FWD
>
GEN_CALL
Press the dynamic function key shown on the left.
You will receive confirmation of the activation or deactivation of this
service.
í
Press the “C” key to end the programming.
If your extension was initially inactive in relation to the general calls
acceptance service – as shown above the function key’s label –
your extension will now be active (or vice versa).
When your general calls acceptance status is active, this will also
be indicated on your idle extension by the letters “GC” displayed on
the first line of the screen.
119
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
You will hear a specific voice announcement each time you lift your
handset or attempt to place a call in handsfree mode. By default,
the message is: “Your extension is receiving external calls of the
attendants”.
FRI 20-APR 15:28
4 Callers
REDIAL
GC
2
Station 420
CALLERS
PICKUP
NAME
>
Notes:
Your rights to the general calls acceptance service depend
on your facility’s different private and public networks.
When you have the right to the service, a digit may be dis-
played at the end of the first line of your extension’s screen.
Whether or not the service is active on your extension, it will
indicate the number of calls currently being processed by
the attendants. If it is flashing, this means that at least one
call is waiting to be processed. The purpose of this digit is
to encourage you to activate the general calls acceptance
service on your extension.
Answering a Call from a Door Phone
Your telephone facility may be equipped with a door phone, the
calls from which are usually processed by the attendants, just as
the general calls are for your facility.
According to a right assigned to your extension, you may be
allowed to answer calls from a door phone. This is generally the
case.
The general calls acceptance service previously described, also
manages your ability to assist the attendants by accepting or
declining door phone calls.
A door phone call is presented exactly as any other incoming call
would be.
Notes:
The presentation of a door phone call usually lasts no more
than 30 seconds. After this timeframe, the door phone call
will be automatically disconnected. A door phone call may
not be placed on hold, nor may it be transferred.
The door phone is usually logged on by an electrical
mechanism independent from your telephone facility.
120
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
Call Pick-up for General Calls That Are
Ringing
Your telephone installation may feature a common bell that will
be heard when your facility’s general calls are not answered by
an attendant, within a specified timeframe.
Typically, this delay is 60 seconds when attendants are present,
or 1 second in night mode, when the attendants are absent.
If you wish, you may pick-up a general call on your extension.
To do so, after lifting the handset or in handsfree mode:
FRI 20-APR 15:28
4 Callers
REDIAL
Station 420
CALLERS
PICKUP
NAME
>
PICKUP
Press the dynamic function key shown on the left.
FRI 20-APR 15:28
L1 Pick up _
GENERAL
MAIN_GRP
SEC_GRP
DEFLECT
DEFLECT
Press the dynamic function key shown on the left until if you
wish to have a picked up call presented to you.
Otherwise, proceed directly to the next step.
FRI 20-APR 15:28
L1 Deflection _
GENERAL
MAIN_GRP
SEC_GRP
GENERAL
Press the dynamic function key shown on the left to pick up
a call presented on the common bell.
Depending on whether or not you requested prior presentation of
call to be picked up, you will be directly connected to the caller of
the picked up call, or the call will be presented to you through one
of your extension’s line keys, which will begin to flash.
In the second case:
L1
ÖÔ
Press the flashing line key corresponding to pick up the call.
Note: If several general calls are ringing simultaneously, the
oldest call will be automatically selected.
121
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
Complete Third Party Call Forward
Service
You have access to the Follow me or third party call forward
services that allow you to remotely program call forwarding from
the extension that will become the recipient. See also the “Call
Forwarding Services” section.
Your facility’s attendants have access to a complete third party call
forwarding service that enables them to define a call forward for
any user’s account, including yours.
This may consist of a call forward on no-answer condition, a call
forward on busy condition, a call forward on no-answer and busy
conditions, or an immediate call forward. It may also consist of a
call forward on Do not disturb condition, or a call forward on mini-
message condition.
When applicable, the number to which calls may be forwarded
could be an internal party’s individual extension, a hunt group,
another user’s personal group, or even the access number for an
integrated voice mail system that your facility may use. It may also
consist of an external number.
Programming this third party call forwarding service is carried
out similarly to the Follow me service – see the “Call Forwarding
Services” section.
First, they simply dial the extension number to call forward from,
and then designate the internal or external call forward recipient, if
applicable.
When an attendant carries out this operation, he/she does not
need to enter any user passwords – not even his/her own.
A call forward programmed in this manner is effective immediately.
In terms of the rights assigned to your extension and each targeted
recipient extension, it may be possible for you to program call for-
wards on behalf of a third party account.
Generally speaking, this assumes that you know the third party’s
user password for whom you are programming the third party call
forward.
Note: Besides attendants, there are certain users – perhaps
yourself – who may also have the privileged right to program
third party call forwards without entering any user passwords.
122
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Services Reserved for Attendants
You may be an attendant for your MD Evolution system. If so, your
Dialog 4223 Professional extension will be your attendant position,
in a system that can be composed of up to 4 attendant positions.
Your role, then, is to process general calls made to your telephone
facility.
In fulfilling this role, you have access to all of the services offered to
system users, such as the refer back call, any type of call transfer,
voice page on a free extension, etc.
You also have attendant-based services, such as call offer and
the Do not disturb extension override service. See the “Attendant-
Based Services” section.
You position also offers telephone services that are reserved for
attendants, including:
•
The option of managing a general call forward for your facility,
through which all incoming ISDN network calls are systematically
forwarded to a pre-set external number.
•
The management of the common bell service, which – when it
is available – allows general calls that have not been answered
by the attendants to be answered by users who have activated
this service.
You also have access to several basic management services for
your facility, including:
•
•
•
•
User password re-initialisation.
Time and date updating for the telephone system.
Abbreviated dialling management.
Consultation of the quality of external correspondents’ greeting.
123
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Operations for General Calls in Day Mode
As an attendant, your role is to process your facility’s general calls
during your shift.
When we refer to “Day mode”, we are referring to the mode that is
automatically activated when you assume your duties (or when the
first attendant does so), and remains applicable as long as your
status (or at least one attendant’s status) remains in active general
calls acceptance mode (see details to follow).
Your facility’s general calls are, firstly, all of the external calls
received on your facility’s general number – not those that are
initially routed to a specific user.
Secondly, they are the calls that are directly addressed to joint DID
(Direct Inward Dialling) users that are automatically re-directed to
you, as a result of a no-answer or busy condition for the said users,
and usually within a timeframe of 30 seconds.
These general calls are presented simultaneously to all active attend-
ants, with a specific message that enables you to distinguish them:
•
•
•
I. DIRECT or I. UNUSED NUMBER for a call received on your
facility’s general number, or on a non-assigned DID numbers,
I. NO ANSWER FROM <Name> for a call re-directed when an
identified internal user does not answer,
I. BUSY ON <Name> for a call re-directed when an identified
internal user’s line is busy.
The letter “I”, which stands for “Instance” indicates that this consists
extensions.
L1 Aastra-00164477500
I. NO ANSWER FROM SMITH Peter-405
REDIAL CALLERS PICKUP
AT
2
NAME
>
You may then process each call just as you would one of your
personal calls; typically, you will transfer the call to another user
within your telephone facility.
The call transfer may be made after you have conversed with the
requested party, but it may also be transferred directly on his/her
extension’s ringing or busy conditions. See also the “Operations
during a Call” section.
If the calling party is an external caller, you retain supervision of the
transferred call until the requested internal user has answered.
Lx
ÖÔ
The LED associated with the line key on which this call is processed
continues to flash.
124
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
At any time, you may then return to this camped-on call by pressing
the associated line key. The call to the requested internal user is then
cancelled.
You may also elect not to supervise the external calls that you transfer
when the requested internal user does not answer or is busy.
The system will automatically present them to you once again, if the
call is not processed by the requested party within a typical timeframe
of 30 seconds.
It is also possible that external calls processed by you or another
user are returned to you, for example, on a no-answer condition for
a second transfer.
These calls will be accompanied by the following messages:
•
R. NO ANSWER FROM <Name> for a call re-directed to you
when an identified internal user does not answer.
•
R. BUSY ON <Name> for a call re-directed to you when an
identified internal user’s line is busy.
The letter “R” stands for “Return”, and replaces the letter “I” for
“Instance”, which indicates, then, that the call has already been
processed.
L1 Aastra-00164477500
R. NO ANSWER FROM WESSON Paul-407
AT
2
>
REDIAL
CALLERS
PICKUP
NAME
During a period of brief overload, or following a temporary absence,
able to answer a general call within a typical timeframe of 60 seconds.
The general call is then redirected to:
•
Designated day overflow extensions. Facilities may have up to
•
A possible common bell that may be part of your telephone
facility.
The preferred call overflow plan depends on your facility’s settings,
just as with the day overflow extensions.
In the second case, your facility’s users are generally allowed to
pick up a general call presented with the common bell. See the
“Attendant-Based Services” section.
Users who have activated general calls acceptance on their exten-
sions may also assist the attendants, especially during brief overload
periods. These users are then presented with the general calls at
the same time as the active attendants. See the “Attendant-Based
Services” section.
125
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Notes:
As an attendant, you may also receive personal calls dialled
to your own extension number. You also process the auto-
mated attendant calls that are usually dialled by internal users
who use the “9” prefix.
You may also be the recipient of call transfers or call forwards
from internal users. The message “TRANSF FROM” <Name>
or “FOR” <Name> enables you to distinguish the reason for
these calls (transfer or forward), as well as their origin.
Operations for General Calls in
Night Mode
As an attendant, you may also control your ability to answer general
calls, in terms of your work shifts (see details to follow).
When there are no longer any active attendants, the system auto-
matically switches to night mode.
In night mode, general calls are usually directed immediately to:
•
Designated night extensions. A facility may be composed of up
to 10 night extensions, which, when in night mode, have access
to the same services attendants have in day mode.
•
A possible common bell that may be part of your telephone
facility.
The designation of these night extensions depends on how your
facility is programmed.
night call forward recipient that is programmable on a daily basis,
either by you or another attendant when your position is deactivated.
The recipient of this programmable night call forward may be an
internal or external number.
In the case where general calls were routed to the common bell, your
facility’s users are generally allowed to pick up a general call pre-
sented with the common bell. See the “Attendant-Based Services”
section.
Users who have activated general calls acceptance on their exten-
sions may also answer general calls in night mode. These users are
then presented with the general calls at the same time as the pre-
viously mentioned extensions. See the “Attendant-Based Services”
section.
126
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Notes:
Your facility may also be equipped with an automated
attendant that is usually a complement to an integrated
voice mail system. This automated attendant may be active
in day and/or night mode. In the first case, it allows you to
relieve call congestion. In the second case, it allows general
calls to be directed typically to a common mailbox that is
reserved for all of your facility’s attendants. See also the
“Voice Mail Services” section.
precedence over the use of an automated attendant as
described above.
Activating Day and Night Services
As an attendant, you may also control your ability to answer
general calls, in terms of your work shifts.
This is carried out within the framework of the management of the
general calls acceptance service accessible to various users within
your facility. See the “Attendant-Based Services” section.
To activate your attendant position at the beginning of your shift,
from an idle extension:
Menu
Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
Programming
disabled
LOCK
disabled
disabled
disabled
GEN_CALL GROUP
CALL_FWD
>
GEN_CALL
Press the dynamic function key shown on the left.
You will receive confirmation for the activation.
í
Press the “C” key to end this service.
Your position becomes active to process the facility’s general
calls, which is indicated by the “Active” status above the previous
“GEN_CALL” function key.
127
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
When your position’s general calls acceptance status is active, this
will also be indicated on your idle extension by the word “enabled”
displayed on the second line of the screen.
FRI 20-APR 15:28
4 Callers
REDIAL
AT
2
AT 420
CALLERS
enabled
PICKUP
NAME
>
If you are the first (or only) attendant who has signed on, the
system automatically changes from night mode to day mode.
On the other hand, to deactivate your attendant position at the end
of your shift, from an idle extension:
Menu
Press the Menu key.
Programming
enabled disabled
GEN_CALL GROUP
disabled
LOCK
disabled
CALL_FWD
>
2
GEN_CALL
Press the dynamic function key shown on the left.
Your extension prompts you to enter a number for the night call
forward, when applicable.
FRI 20-APR 03:29:00 PM
ADD A NS ? _
AT
NONIGHTST
NIGHT ST NO
z
Dial the desired extension number for the night call forward.
This night call forward number may be an internal number. It may
also be an external number containing no more than 18 digits, must
begin with the ad-hoc network access prefix, and end with “#”.
Or,
NONIGHTST
Press the dynamic function key shown on the left if you do
not want to define a night call forward.
In either case, a system message will confirm whether or not
programming was carried out.
í
Press the “C” key to end this service.
Your position no longer accepts the facility’s general calls, which is
indicated by the “Inactive” status above the previous “GEN_CALL”
function key.
128
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
When your position’s general calls acceptance status is inactive,
this will also be indicated on your idle extension by the word
“disabled” displayed on the second line of the screen.
FRI 20-APR 15:28
4 Callers
REDIAL
2
AT 420
CALLERS
disabled
PICKUP
NAME
>
If you are the last (or only) attendant to sign off, the system auto-
matically changes from day mode to night mode.
Notes:
You are free to deactivate your position as attendant at any
time, even if it is not advisable when general calls are currently
being processed.
If a night call forward number is already defined, you may
save it by simply selecting the “CONFIRM” option. You may
modify or cancel it using the “MODIFY” or “NONIGHTST”
option.
When an attendant’s position is active, he/she will hear the
standard dial tone upon lifting the handset. The attendant
does not hear a voice message indicating the general calls
acceptance status, since this, obviously, would be too
annoying.
A digit may be displayed at the end of the first line of your
attendant position’s screen. Whether or not the service is
active, it will indicate the number of general calls currently
being processed. If it is flashing, this means that at least one
call is waiting to be processed. The purpose of this number
is to encourage you to activate your position, as the case
may dictate.
System General Call Forward
In relation to your facility’s connection to the ISDN network, your
specific rights as an attendant include the ability to program a
system general call forward.
This call forward is an immediate call forward that is directly
managed at the ISDN network level.
It is applicable to all incoming calls for your facility, which will system-
atically be directed to the external number that was defined. This
then includes both general calls as well as those received through
DID (Direct Inward Dialling), destined for internal users who now
may not be contacted at all.
129
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
In comparison, the previously described night call forward, to which
your facility switches when it transitions to night mode, only routes
your facility’s general calls, but does not affect the internal users’
ability to be contacted through their DID numbers.
To program a general call forward for your facility, when your attendant
position is idle, and your general calls acceptance status is active:
Menu
Press the Menu key.
You then are granted access to your position’s programming
mode.
Programming
disabled
LOCK
enabled
disabled
disabled
GEN_CALL GROUP
CALL_FWD
>
CALL_FWD
>>
Press the dynamic function key shown on the left.
You may program your position’s call forwarding service, and as
the case may dictate, a system general call forward.
Press the Next key to display the following screen:
Call fwd
NODISTURB NREP+BUSY
REMOTE_FWD SYSTEM
>
SYSTEM
Press the dynamic function key shown on the left that corre-
sponds to your system general call forward service.
Your position displays the type of call forward requested, and prompts
you to enter the number for the external call forward recipient.
System call forward
Number : _
BLANK
CURSOR+
CONFIRM
RETURN
FWD NO
z
Dial the external number for the recipient of your system
general call forward.
This number may contain up to 18 digits. It should be dialled without
the “0” public network access prefix, since the system will automat-
ically take it into account.
CONFIRM
Press the dynamic function key shown on the left to confirm
the external number you entered.
Your position then displays a message confirming the programming
of your system general call forward.
í
Press the C key on your position to exit the programming mode.
The system general call forward that you have just defined is effective
immediately.
130
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
This change in status will be indicated on your idle attendant position
screen with the letters “SF” on the first line.
A special dial tone is also heard each time you attempt to place a
call, whether in handset or handsfree mode.
This is also true for all of your facility’s extensions.
FRI 20-APR 15:28
4 Callers
REDIAL
SF
Station 420
CALLERS
PICKUP
NAME
>
On the other hand, to cancel a system general call forward, when
your attendant position is idle, and your general calls acceptance
status is active:
Menu
CALL_FWD
2 times >>
Press the Menu key.
Press the dynamic function key shown on the left.
Press the Next key twice in order to display the following
screen:
Call fwd
CANCEL
CANC_SYST
<
CANC_SYST
Press the dynamic function key shown on the left to cancel
the system general call forward.
Your position then displays a message confirming that the system
general call forward cancellation has been accepted.
í
Press the C key on your position to exit the programming mode.
The letters “SF” disappear, and you will then hear a standard dial
tone when you attempt to place a call.
This is also true for all other extensions in your facility.
Note: The programming and cancellation of the system
general call forward may only be executed when your at-
tendant position is idle, and your general calls acceptance
status is active.
131
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Managing the Use of the Common Bell
Service
Your telephone facility may feature a common bell service to which
your facility’s general calls will be directed when they are not
answered by an attendant, or any other user who could possibly
assist.
This applies in day mode, after a typical timeframe of 60 seconds,
and immediately in night mode (see also the processing of general
calls previously mentioned).
In relation to the previous contexts, your specific rights as an attend-
ant also include the ability to manage the common bell service for
your facility.
To activate or deactivate the use of a possible common bell service,
from an idle attendant position, and when your general calls accept-
ance status is active:
Menu
Press the Menu key.
You then access the programming of your position.
3 times >>
Press the Next key 3 times in order to display the following
screen:
Programming
disabled
ALERT
GEN_RING
SYSTEM
<
GEN_RING
Press the dynamic function key shown on the left.
If use of the common bell service is not valid – as is the case when
the status “disabled” is displayed above the function key – it becomes
valid, and the status changes to “enabled”, and vice versa.
í
Press the C key on your position to exit the programming mode.
Note: The use of a possible common bell service for your
facility may only be managed when your general calls accept-
ance status is active.
132
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Accessing the General Programming
Services
As an attendant, you have access to several basic management
services for your telephone facility, including:
•
•
•
•
•
User password re-initialisation.
Time and date updating for the telephone system.
Abbreviated dialling management.
Consultation of the quality of external correspondents’ greeting.
The consultation of the charges counters assigned to each user
within your facility.
These system programming services may be accessed as follows,
from an idle position, and when your general calls acceptance status
is active:
Menu
Press the Menu key.
3 times >>
Press the Next key 3 times in order to display the following
screen:
Programming
disabled
ALERT
GEN_RING
SYSTEM
<
SYSTEM
Press the dynamic function key shown on the left.
Your position prompts you to enter your user password. By default, as
with any other extension, your user password is “1234”, however you
may have modified it. See also the “Programming Your Extension”
section.
Administration
Password _
RETURN
PASSWORD
z
Enter your user password.
You are then granted access to system programming, for which the
screens are illustrated on the next page.
Administration
I. CHARGE E. CHARGE
Administration
PASSWORD INC_CALLS
TIME
ABBR_NB
>
<
133
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
XXXXX
Next, press the dynamic function key that corresponds to
the desired system programming option (it may be necessary
to press the Next key). You may then proceed with the selected
system programming; you will be prompted to validate at each
step.
Once you have validated one or all of your setting(s), one of the
screens shown above will be re-displayed.
Then, to exit the system programming mode:
í
Press the “C” key.
Your position returns to idle status.
Note: Access to system programming services is only
granted when your attendant position is in active general
calls acceptance mode.
Reinitialising an Extension’s User
Password
Each extension, as well as your attendant’s position, is assigned a
user password that controls access to certain telephone services.
Each user has the option of managing his/her password. If a pass-
word is forgotten, the only option available is to contact an attendant
(or the system administrator) to have it reinitialised (see also the
“Programming Your Extension” section).
To reinitialise the user password assigned to an extension, from the
system programming mode:
Administration
PASSWORD INC_CALLS
<
PASSWORD
Press the dynamic function key shown on the left.
Your extension prompts you to enter the extension number for which
the user password is to be reinitialised.
Resetting of user password (1234)
Station number _
RETURN
STATION NO
z
Dial the number for the involved extension.
CONFIRM
Press the dynamic function key shown on the left.
The password associated with the identified extension is reset to
“1234”; the user may then modify it once again.
134
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
Managing the System’s Date and Time
Your telephone system’s date and time are automatically
maintained for all of the extensions within the facility.
It is possible however, that there could be a slight discrepancy in
the time displayed on your attendant’s position. It is also possible
that at times the date displayed is not correct – more particularly
on February 29th in leap years.
In this case, to correct the date and/or time, from the system
programming mode:
Administration
I. CHARGE E. CHARGE
TIME
ABBR_NB
>
TIME
Press the dynamic function key shown on the left.
Your position displays the current system date and time, as in the
following screen:
Modification of the date
TIME = 08:57
DAY/MONTH/YEAR = 31/05/05
CONFIRM RETURN
CURSOR+
TIME/DATE
z
Use the keyboard to modify the date and/or time information
displayed, as needed.
For this purpose, you use the CURSOR+ to navigate to the digit you
wish to modify.
CONFIRM
Press the dynamic function key shown on the left.
The system date and/or time that you have just modified is/are up-
dated on each extension in your facility, as well as all other equipment
that features a date and time stamp.
Managing Abbreviated Dialling
Your telephone installation may process up to 800 abbreviated
numbers, which is managed by your system administrator or from
any attendant position – see also the “Operations for Outgoing
Calls” section.
These abbreviated numbers are broken down into:
•
A general abbreviated list, identified as list “00”. This is normally
accessible from any extension within the facility.
135
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
•
According to the system’s programming, there may be from 0
to 36 personal abbreviated lists, identified from “01” to “36”.
These lists are shared between groups of extensions. A personal
abbre-
viated list, for example, may be reserved for attendants.
Each personal list may include up to 20 abbreviated numbers taking
on a value between “00” and “19”.
The size of the general list depends on the number of personal lists
that are used, with abbreviated numbers that generally have the
values of “200” to “xxx”. Contact your system administrator as
needed.
To manage an abbreviated number (create, modify or delete), from
the system programming mode:
Administration
I. CHARGE E. CHARGE
TIME
ABBR_NB
>
ABBR_NB
Press the dynamic function key shown on the left.
Your position then prompts you to identify the abbreviated number
to manage, through its general or personal list number, and then its
own number within the selected list.
LIST= _
ABBNB=
RETURN
ABBR. LIST
ABBR. NO
z
z
Dial the number for the involved list.
Next, dial the specific number that corresponds to the abbre-
viated number.
You extension then prompts you to define the number for the
selected abbreviated number, or if it is already defined, it displays
the abbreviated number, which you may subsequently modify or
erase, as necessary.
LIST= 00
NN = _
BLANK
ABBNB= 205
NAME=
TKGR= 1
NEXT
COMPL= Y
CONFIRM
CURSOR+
COMPLETE NO
z
Dial the external number associated with the selected abbre-
viated number.
It may contain up to 18 digits; the number entered should not contain
an external network access prefix. Generally speaking, it should be
entered comprehensively.
CURSOR+
Press the dynamic function key shown on the left until the
cursor is in the NAME field.
136
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
ABBR. NAME
z
Using the keypad, enter the name identifying the abbreviated
number.
This name, from 1 to 15 characters, will allow users to clearly
identify an abbreviated number. It will then also be included in your
company’s directory; as a result, a call by name may be placed to
any external party included in the abbreviated dialling list. See also
the “Directory, and Call List Services” section.
CONFIRM
Press the dynamic function key shown on the left.
The abbreviated number that you have just set is saved.
Notes:
You may program abbreviated numbers one after another
using the “NEXT” function, and by only selecting the
“CONFIRM” option when you have entered all the numbers.
The “BLANK” and “CURSOR+” functions enable you to
delete or modify all or part of the existent programming.
The “CURSOR+” function enables you to advance the
cursor one character at a time in any given field.
For the “NAME” entry, you may recall that letters are obtained
by successively pressing corresponding keypad numbers
once, twice or three times.
The “TKGR” field corresponds to the (outgoing) trunks group
used to place a call that was dialled using abbreviated
dialling. Generally, the value “1” corresponds to the public
network trunk, and does not need to be modified. Once
the cursor is properly positioned within the field using the
“CURSOR+” function, you may then modify the value from
“2” to “8” using the “MODIFY” function. Contact your system
administrator for more information.
An abbreviated number is generally complete. The
“COMPL” field displays the “Y” for “Yes”. An abbreviated
number may possibly be incomplete, in which case those
who use it must complete it manually, each time it is used.
This may, for example, allow access to a series of external
numbers using just one abbreviated number. Once the
cursor is properly positioned within the “COMPL” field using
the “CURSOR+” function, you may then modify the value to
“N” for “No” using the “MODIFY” function.
137
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
The number of incoming calls received from the external network
identified by its trunk number is displayed in 5-digit format; if the
number exceeds those place values, it will be followed by asterisks (*).
The percentage of calls lost varies between 0 and 99%.
QS
SINCE
13% LOST CALLS WITH 8320 IN. CALLS
RETURN
15/03/05
18:30
No = 01
QS
30/03/05
11% LOST CALLS WITH 2115 IN. CALLS
RETURN
08:30
21/04/05 18:30
No = 01
Note: If no selective period was pre-defined, a request for
statistics over this period will prompt the following message:
“0% LOST CALLS WITH 0 IN. CALLS”.
Consulting Charge Counters for Your
Facility’s Extensions
Your attendant’s position also enables you to consult, print and
reset the charge counters assigned to each extension in the facility,
including the counter assigned to your own position.
This obviously is only applicable if your telephone facility is connected
to the ISDN network, and if the latter re-transmits the charge infor-
mation for public calls emitted from your facility.
To consult or manage the charge counter assigned to an extension,
from the system programming mode:
Administration
I. CHARGE E. CHARGE
TIME
ABBR_NB
>
I. CHARGE
Press the dynamic function key shown on the left.
Your position prompts you to identify the involved extension number.
Charges management
Station number _
BLANK
PRINT
RETURN
STATION NO
z
Dial the internal extension number you wish to contact.
The screen then shows the cumulative amount imputed to the
selected extension, from the last time the cost counter was reset.
139
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
This accumulation of charges here is iterated in the number of
charges received from the public ISDN network, as well as the
total cost, exclusively expressed in Euros.
420 ROUSSET Jean-Luc
CHARGES = 85
COST = 8.50 EUR
RETURN
BLANK
PRINT
You may then:
BLANK
PRINT
Press the dynamic function key shown on the left.
You are prompted to confirm, and then the charge counter assigned
to this extension is reset to zero.
Or,
Press the dynamic function key shown on the left.
The report for the charge counter assigned to the extension is printed
on a system printer connected to your telephone facility. As illus-
trated below, the printout provides the costs for the calls that are
imputed to the involved extension, in two currencies – French Francs
and Euros.
15 May – 5:35 p.m.
Printout of users’ charge counters.
DN
TS
CHARGES
COST1
COST2
420 TELEPHONY 85
55.76 FF
8.50 EUR
Note: The “E. CHARGE” service enables you to manage,
in a similar manner, the charge counters that are processed
in terms of public network access, instead of your facility’s
extensions.
Major System Alarm Message Indication
On your attendant’s position, you may also receive an indication
that there is a major alarm within your telephone system.
140
MD Evolution – Dialog 4223 Professional
Services Reserved for Attendants
From an idle position with an active general calls acceptance mode,
you are notified by the letters “AL AT” on the first line of your
position’s screen, when a major alarm is detected with the
telephone system.
FRI 20-APR 15:28
4 Callers
REDIAL
AL AT 2
AT 400
CALLERS
enabled
PICKUP
NAME
>
From this point, you may consult the corresponding alarm. To do so:
Menu
Press the Menu key.
3 times >>
Press the Next key 3 times in order to display the following
screen:
Programming
disabled
ALERT
GEN_RING
SYSTEM
<
ALERT
Press the dynamic function key shown on the left.
Your position then displays the message explaining the major alarm
perceived within your telephone system. Two examples are given
below; however numerous different messages may be displayed,
according to the cause of the alarm.
Card xx out of service (err :xxx)
RETURN
Software protection (err :123)
RETURN
Inform your system administrator as to the content of this message.
Obviously, the sooner, the better.
141
MD Evolution – Dialog 4223 Professional
QSIG-MD Private Network Services
QSIG-MD Private Network Services
Depending on the configuration of your telephone system, this
may be integrated within a QSIG-MD private network, which
groups various MD Evolution systems within your company.
These systems may be connected by:
•
Digital tie lines to a telecommunications operator. These digital tie
lines are therefore reserved for private calls within your company’s
network.
•
Your company’s Intranet network, local area network (LAN), or
wide area network (WAN). In this case private telephone calls
between network calls are transmitted over the IP network, at the
same time as data that is exchanged between your company’s
various sites.
In the second case, there are two possible techniques:
•
The first, called IP-Trunking, uses proprietary messages that
are exchanged over the IP network. This applies when up to
7 MD Evolution systems are networked.
•
The second technique, called IP-Networking, uses standardised
IP H.323 messages that are exchanged over the IP network.
This applies for a wide area network, which may include more
than 100 MD Evolution systems.
No matter the case and regardless of the private call supports used
within your company’s private network, the majority of the
telephone services available locally between two of your facility’s
internal users become available to the private users connected
through remote nodes.
Moreover, if IP-Trunking networking occurs over an IP network,
a non-IP hand-over service is also available for occasions where
there may be a downgrade in the voice transmission over the IP
network.
142
MD Evolution – Dialog 4223 Professional
QSIG-MD Private Network Services
Available QSIG-MD Private Network
Services
If your MD Evolution telephone system is integrated within a QSIG-
MD private network that combines other MD Evolution systems
within your company, the majority of telephone services available
locally between two internal users of your telephone facility are also
available between private users connected through remote nodes.
The tables below establish the general list of different services
available within the network, listed in the order in which they
appear in this guide.
These services are used on the network in the same way as they
are within your facility.
When necessary, you may simply dial the private network number for
the party you wish to contact, rather than dial the internal extension
number.
In the case where a network generally uses a homogenous dialling
plan, a private network number typically follows this format:
<LC><DN>, where <LC> is a local code identifying each system or
network node (1 to 3 digits, depending on the size of the network),
while <DN> is simply the internal number for the involved party,
within his/her own system or node.
Whenever necessary, ask your system administrator for more
information concerning the local codes applicable within your
private company network.
Operations for Incoming Private Calls
Reception of private calls
Identification of private callers by their name and number
Consulting new incoming private calls
Call pick-up on a networked extension (without deflection)
Operations for Outgoing Private Calls
Placing private calls through manual dialling
Placing private calls using a line or repertory key
Last external private number redial
Identification of private called parties by their name and number
Viewing the free, busy, etc. status for private called parties
Automatic camp-on on a busy networked extension
Automatic call-back to a busy networked extension
Automatic call-back to a networked extension that did not answer
Private call with temporary protection
DTMF end-to-end dialling for private calls
Discrimination and Least Cost Routing (LCR) of external private calls
143
MD Evolution – Dialog 4223 Professional
QSIG-MD Private Network Services
Operations during a private call
Enquiry call during a private call conversation
Refer back call between private calling parties
Call transfer between two private parties – all types
Conference call with private calling parties
Placing private calls on hold
Call parking and (local) parked call retrieving
Directory, and Call List Services
Private call list and automatic call-back
Call forwarding services
Fixed call forward to private recipients – all types
Variable call forwards to private recipients – all types
Networked Follow me service – Activating and cancelling
Deflection of private calls
Information concerning private call forwards
Message Services
Networked call forward on mini-message or absence
Voice Mail Services
Voice mail from private calling parties
External voice mail notification at a private number
Consulting voice mail from the private network
Automatic call-back to the private party who left a message
Networked personal assistant services
Personalising your mailbox on the private network
Remote access to a common mailbox for a mailing list
Group Services
Status supervision for all network extensions – all statuses
Other Services
Secret of identity for private calls
Conversation recording for private calls
Re-transmission of the cost for public calls through the private
network
Attendant-Based Services
General calls acceptance for private calls
Networked third party call forward – Activating and cancelling
Services Reserved for Attendants
Operations for networked calls – all types
144
MD Evolution – Dialog 4223 Professional
QSIG-MD Private Network Services
Notes:
The voice message services are available only if an integrated
voice mail system is available for each private network within
a company.
Within the framework of a company’s private network, the
attendants may be decentralised on each network node, or
centralised on a systems subset. From an attendant’s per-
spective, private calls between nodes may be processed
like external calls, or considered to be calls local to a node.
Certain services are only available to a network depending
on the specific rights assigned to your extension. This is
applicable for the following services: supervision of network
extension statuses, secret of identity for private calls, and
general calls acceptance for private calls.
Non-IP Hand-Over Service
If your telephone system is integrated within a QSIG-MD private
network, and your calls are routed over your company’s Intranet
network, which managed according to the IP-Trunking technique,
you may also have access to a non-IP hand-over service.
The quality of communications established over the Internet network
is generally good, mostly thanks to the implementation of a system
that gives voice calls priority over data transmitted on the IP network.
However, occasions may arise where the quality of the voice trans-
mission of calls over the IP network is reduced. The non-IP hand-
over service allows you to request that your current call be switched
to a possible private digital tie line, or the public network (depending
on availability).
To activate this service during an ongoing call established over your
company’s IP network:
FRI 20-APR 15:28
L1 SMITH Peter-405
HAND OVER
01:33
>
MSG+DISC
FLASH
HAND OVER
Press the dynamic function key shown on the left.
Your call on the IP network is switched over to the non-IP network
immediately, without interrupting your call.
Note: The “HAND OVER” function is only available,
obviously, when your call has been established on the IP
network. The non-IP hand-over service is not available for
QSIG-MD private networks using an Intranet network
managed according to the IP-Networking technique.
145
MD Evolution – Dialog 4223 Professional
Installing Your Extension
Installing Your Extension
Your Dialog 4223 Professional is usually installed by your system
administrator.
However, this section provides you with all of the instructions for
installing your extension yourself and for maintaining it.
Installing Your Extension’s Telephone
Cords
Your extension is connected to your facility’s telephone facility
through a line cable that connects into the RJ12 female jack
labelled LINE, located on the underside of your extension.
The handset cord is connected to the RJ12 female connector
labelled HANDSET located, once again, on the underside of your
extension. This may be installed so that it comes out of either the
left or right side of your extension. In the first case, the handset
cord should be inserted in the slot made for this purpose, as
illustrated in the diagrams below.
When it is necessary to disconnect a cord, it is recommended that
you use a screwdriver to depress the release tab on the RJ12 male
connector.
MD Evolution – Dialog 4223 Professional
147
Installing Your Extension
Installing Your Extension’s Support Feet,
and Adjusting the Angle
Your extension is equipped with two support feet that have two
possible installation angles, depending on the angle you prefer for
your extension.
To install the support feet, push them into the underside of your
extension to the desired angle, then push in the tab to hold their
position.
If you wish to remove the support feet, pull on the tab to release
them before removing the feet from the extension.
148
MD Evolution – Dialog 4223 Professional
Installing Your Extension
Adjusting the Screen Angle
Your extension’s screen is also adjustable, allowing you to choose
the best possible viewing angle.
To adjust the screen angle, simply push or pull the screen as
illustrated below.
Installing Your Extension’s Label
Your extension also comes with a label that identifies each fixed
function key’s use. You may also indicate what functions have
been programmed on your extension’s various line keys (see the
“Programming Your Extension” section.)
This label is protected by a plastic cover.
To insert or remove the label, lift the protective cover as illustrated
below.
Note: If you need a new label, contact your system
administrator.
MD Evolution – Dialog 4223 Professional
149
Installing Your Extension
Miscellaneous Tips for Installing and
Maintaining Your Extension
Most often, your extension will be installed on your desk. Here are
a few additional tips:
•
Never place your extension on fragile surfaces. To prevent it
from scratching your desk, place an anti-skid mat underneath
your extension.
•
•
Never place your telephone near any source of extreme heat,
for example – next to a radiator.
Make sure that the line cable is never crimped.
Use a soft, slightly damp (not wet) or anti-static cloth to clean your
extension. Never use any abrasive solvents, liquids or cloths to
clean your extension.
Aastra cannot be held responsible for any damage to your tele-
phone caused by any non-compliance with the above instructions.
Installing Your Extension on a Wall
Your extension may also be installed on a wall support, without any
particular accessories.
To do so, you must first rotate the hanging clip on the extension,
thus ensuring that your extension’s handset will be secure. It is
made of flexible plastic.
According to the instructions illustrated on the next page:
•
•
•
Begin by removing the hanging clip with a screwdriver.
Flip the clip over.
Re-insert it into your extension.
150
MD Evolution – Dialog 4223 Professional
Installing Your Extension
Using a screwdriver, remove the plastic covers from the two holes
located on the underside of your extension. These holes are pre-
cut, and indicate where the screw heads will be inserted to mount
the extension on the wall.
Next, drill two holes that will hold your extension’s wall mounting
screws. These screws should be in compliance with the diagrams
below, with a vertical distance of 100 mm between them.
9,5 mm
9—10 mm
max 5,5 mm
Now, simply insert the two wall mount screws into the holes on the
underside of your extension.
MD Evolution – Dialog 4223 Professional
151
Your Extension’s Accessories
Your Extension’s Accessories
You may also add the following optional accessories to your exten-
sion:
•
One or several DBY 419 01 satellite(s) or add-on key panel(s).
From one (1) to four (4) satellite(s), each one offering 17 repertory
keys that may be programmed with your most often used internal
or external telephone numbers or telephone service codes.
•
A DBY 420 01 add-on interface module.
As the case may dictate, this module may enable you to connect,
for example, an external ring device, or an external device visually
indicating your extension’s free, ringing, or busy status.
A headset.
•
This can allow you to process your calls using a headset, rather
than in handsfree or handset mode.
This is especially useful for ICD group agents who process
phone calls all day long.
This section provides you with all of the instructions necessary for
installing these accessories. It also includes the instructions for using
a headset.
For the programming and use of the add-on key panels’ or satellites’
repertory keys, see the “Programming Your Extension”,
“Operations for Outgoing Calls” and “Group Services” sections.
Note: You may add up to 4 satellites on your extension
without requiring any additional power supply units. All of
the satellites are powered from your extension, which is
powered through the telephone system.
152
MD Evolution – Dialog 4223 Professional
Your Extension’s Accessories
Installing Add-on Key Panels
You can install your add-on key panel without any particular tools
or accessories.
These panels are connected using a rigid connector designed to
attach the first satellite to the underside of your extension, and
each subsequent satellite to the underside of the previous one.
These modules are held in place by a tulip-shaped pin that is inserted
in the appropriate hole on the underside of your extension or the
previous satellite, as well as the plastic slots located along the edge
of your extension or satellite.
So, to install any satellite, simply follow the directions illustrated in
the following diagram:
•
With your extension upside down, position the new satellite
along the edge of your extension or previous satellite.
•
Press firmly on the bottom of the satellite in order to correctly
insert it onto your extension or the previous satellite.
When removing a satellite, press firmly on the top in order to
disconnect the plastic connector and the tulip-shaped pin.
Just as with your extension, each satellite has a support foot that
can be installed and adjusted to one of two positions, according to
the angle you have set for your extension.
MD Evolution – Dialog 4223 Professional
153
Your Extension’s Accessories
Depending on the number of satellites connected to your extension,
it is suggested that you position the support feet according to the
diagrams illustrated below.
As you did with your extension, to install the support feet, push
them into the underside of your extension to the desired angle,
then push in the tab to secure their position.
If you wish to remove the support feet, pull on the tab to release
them before removing the feet from the extension.
Inserting the Labels for the Add-on
Key Panels
Each satellite is designed to have a label.
It is designed so you may indicate what functions have been
programmed on the various satellite repertory keys (see the
“Programming Your Extension” section.)
This label is protected by a plastic cover.
154
MD Evolution – Dialog 4223 Professional
Your Extension’s Accessories
To insert or remove the label, lift the protective cover as illustrated
below.
Note: If you need a new label, contact your system
administrator.
Installation and Cables for an Add-on
Interface Module
An add-on interface module would be located on the underside of
your extension, in the rectangular opening on the underside of your
extension, designed for this purpose.
It is connected to your extension with a connector that features a
rigid extender attached with three torx-type screws that require an
adapted screwdriver.
External ring devices (both audible and visual) are directly connected
to the module using an RJ12 connector.
MD Evolution – Dialog 4223 Professional
155
Your Extension’s Accessories
Connecting a Headset
A headset is connected with a cord inserted into the RJ12 female
connector labelled HEADSET located on the underside of your
extension.
This cord may be installed so that it comes out of either the left or
right side of your extension, as illustrated below.
When it is necessary to disconnect a headset cord, it is recom-
mended that you use a screwdriver to depress the release tab on
the RJ12 male connector.
Validating a Headset Connection
Once a headset is connected to your extension, you need to
validate that it is indeed properly connected. To do so:
í
+
*
L3
+ 1
z
Simultaneously press and hold the C, * and 1 keys on your
extension’s keypad for 1 second.
Your extension’s L3 line key should light. If this is not the case:
Ô
Press the L3 line key on your extension.
# z
Next, press the # key.
This will then validate that the headset is indeed properly connected.
156
MD Evolution – Dialog 4223 Professional
Your Extension’s Accessories
Operation in Headset Mode
Once the headset connection has been validated, you may then,
at your leisure, operate your extension either in headset or handset
mode.
To deactivate the headset mode:
Í
Simply press the Headset key shown on the left.
When the headset mode is activated, the LED associated with the
Headset key will be on.
When the headset mode is activated, your calls are processed
similarly to calls in handsfree mode. Therefore, to hear the dial
tone before placing an outgoing call on your extension:
Lx
Lx
Ô
ÖÔ
Press a free line key.
Or, to answer a new incoming call presented on your extension:
Press the flashing line key on which the call is presented.
Or, to disconnect a call:
í
Press the “C” key on your extension.
A new call is presented on your idle extension in the standard manner
through an audible, single, discreet signal emitted over the headset,
rather than your extension’s usual ring, which is automatically de-
activated.
However, according to the programming for your facility, this signal
heard in the headset may be accompanied by a repetitive signal
also heard on your extension’s loudspeaker. This signal is repeated
every 5 seconds until you answer the call that is presented to you
on your idle extension.
You will be notified of a new call presented on your extension with a
single ring heard over your extension’s headset. This is also true for
any call that is on hold.
Note: The programming of your facility as described above
is valid for all extensions using a headset.
MD Evolution – Dialog 4223 Professional
157
Your Extension’s Accessories
158
MD Evolution – Dialog 4223 Professional
Index
Index
A
Automatic Call-Back on Busy Condition 26
Automatic Call-Back on No-Answer
Abbreviated Dialling
Abbreviated Dialling – Management 136
Abbreviated Dialling Turned off 22
Account Codes 103
Automatic Camp-on on a Busy Extension 25
Additional Satellites 152
Add-on interface module 152
Add-on Key Panels 152
Alarm – Attendant’s Messages 141
Amplified Listening over Loudspeaker
Adjusting Listening Volume 36
Amplified Listening 34
Background Music Service 97
Distributing a Message to a Common
Answering a Call 17
Answering a Second Call 17
Answering an Incoming Call 16
Appointment Reminder 96
Attendant-Based Services
Call Forward for a Hunt Group 88, 89
Call Offer or Intrusion 117
Call Pick-Up on Common Bell 117
Do Not Disturb Override 119
Door Phone 117
Third Party Call Forwards 117
Attendants (Services Reserved for)
Alarm Message Indication 141
Common Bell 133
Call Log File Information 46
Calling from the Call Log File 46
Consulting a Caller’s Message 46
Call Offer or Intrusion 118
Call Parking
Consulting the Greeting Quality 139
Day Mode – Processing Calls 125
Day/Night Modes – Switching between 128
Night Mode – Processing Calls 127
Processing the Charges Counters 140
System General Call Forward 130
System Management – Abbreviated
Dialling 136
Call Parking 42
Retrieving a Parked Call 42
Call Pick-Up
Call Pick-Up 19
Call Pick-Up + Presentation 19
Call Pick-Up on Common Bell 126
Call Pick-Up within a Hunt Group 85
Call Transfer between Two Parties
Call Transfer during a Conversation 39
Call Transfer on Busy Condition 40
System Management – Access 134
System Management – Date and Time 136
System Management – Passwords 135
Automatic Call-Back
MD Evolution – Dialog 4223 Professional
159
Index
Caller Identification
Adjusting the Volume 36
Presentation of an External Call 16
Presentation of Internal Call 16
Calling Party Callback
Amplified Listening over Loudspeaker 34
Call Hold 42
During a Call – Enquiry Call 37
Callback from the Call Log File 46
Callback to Person Who Left a Voice
Message 73
Charges Counter
General Consultation – Attendants 140
Individual Consultation – User 102
Charges for External Calls
Account Codes 103
Call Detailed Record 104
Consulting the Charges Counter 102
Display of Call Charges 102
Processing the Charges Counters 140
Common Bell
Call Pick-Up on Common Bell 122
Consulting a New Call 18
E
Ending a Call 17, 32
Enquiry Call during a Conversation 37
Adjusting the Extension’s Angle 148
Adjusting the Screen Angle 149
Consulting Voice Messages
Erasing Voice Mail 72
Listening to Voice Mail 71
Local Consultation 68
Remote Consultation 69
Internal and External Rings 14
Conversation Recording 101
D
Date and Time
Day and Night – Attendants’ Modes
Processing Calls in Day Mode 125
Processing Calls in Night Mode 127
Switching between Day/Night Modes 128
Detection of Malicious Calls 100
Dialling Plan – Consultation 115
Directory, and Call Log File Services
Call Log File 46
Integrated Directory and Call by Name 44
Discrimination for Outgoing Calls 33
Do Not Disturb
Do Not Disturb Call Forward 48
Do Not Disturb Override 119
Do Not Disturb Override 119
Door Phone 121
Groups (Services for)
Broadcast Group – Announcement 90
Extension Supervision 83
Groups – Group Call Forward 88
Groups – Opening/Closing 88
Hunt Groups 83
Hunt Groups – Call Pick-Up 85
Hunt Groups – Standby 86
Mobile Extension Service 93
Personal Groups 91
Viewing ICD Calls on Hold 89
H
DTMF End-to-End Dialling 31
Handsfree and Handset Modes
160
MD Evolution – Dialog 4223 Professional
Amplified Listening over Loudspeaker 34
Loudspeaker Listening Volume –
Adjusting 36
Loudspeaker Listening Volume –
Programming 111
Muting during a Conversation 36
Switching from Handset to Handsfree
Mode 35
Switching from Handsfree to Handset
Mode 35
Message 48
Definition – Call Forward on No Answer and
Busy Conditions 48
Definition – Fixed Call Forward 48
Definition – Predefined Variable Call
Forward 48
Forward 48
Follow-Me Service 54
Headset
Connecting a Headset 156
Operation in Headset Mode 157
Validating a Headset Connection 156
Hot Line Call to Attendants 98
http
//www.aastra.com 5
Hunt Groups
Caller Identification 12
Inserting Your Extension’s Label 149
Installing the Support Feet 148
Integrated Directory and Call by Name
Call Forward for a Hunt Group 89
Call Pick-Up within a Hunt Group 85
Definition of Hunt Groups 83
Standby within a Hunt Group 86
Viewing ICD Calls on Hold 89
I
Incoming Calls (Operations for)
Answering a Second Call 17
Call Pick-Up 19
Call Pick-Up + Presentation 19
Consulting New Calls 18
Ending a Call 17
Integrated Directory – Consulting 44
Dialog 4223 Extension Features 8
External Call – Presentation 16
Internal Call – Presentation 16
Internal/External Call – Answering 17
Silent Ringing Function 20
Individual Call Forward (Services of)
Call Deflection Service – What Happens
Next 56
Extension LEDs 11
Information on Your Extension’s Screen 12
Tones, Rings and Voice
Announcements 14
Intrusion or Call Offer 118
Call Forward – Cancelling 52
Call Forward Using the Call-Fwd Key –
Activating 53
L
Call Forward Using the Call-Fwd Key –
Cancelling 53
Call Forwarding Information 58
Definition – “Do Not Disturb” Call
Forward 48
Definition – Call Forward on Busy
Condition 48
Labels
Add-on Key Panel Label 154
Your Extension’s Label 149
Last External Number Redial 24
Least Cost Routing (LCR) of Outgoing Calls 33
Locking Your Extension 94
MD Evolution – Dialog 4223 Professional
161
Index
M
(LCR) 33
Internal Calls – Call Follow-up 25
Last External Number Redial 24
Substitution or Signature – Call in 30
Malicious Calls – Tracing 100
Mini-Message in Call Log File 46
Mobile Extension 93
More Features of Your Extension
Appointment Reminder 96
Background Music Service 97
Charging – Account Codes 103
Charging – External Calls 102
Conversation Recording 101
Detection of Malicious Calls 100
Hot Line Call to Attendants 98
Protection from Ringback to Attendants 99
Secret of Identity 100
P
Permanent Protection
Permanent Phonic Protection 29
Protection against Call Pick-Up 19
Protection against Mini-Messaging
Muting during a Conversation 36
N
Protection against Voice Paging 28
Protection from Ringback to Attendants 99
Personal Assistant Voice Mail
Personal Groups 91
New Incoming Call
Answering a Second Call 17
Consulting a New Call 18
Night and Day – Attendant’s Modes
Processing Calls in Day Mode 125
Night and Day – Attendants’ Modes
Processing Calls in Night Mode 127
Switching between Day/Night Modes 128
Non-IP Hand-Over 146
Managing External Notifications 74
Managing Your Greeting Message 74
Notification of Voice Mail
External Notification 68
External Notification – Programming 74
Internal Notification 67
O
New Call – Consulting 18
Opening/Closing a Hunt Group 88
Outgoing Calls (Operations for)
Call by Name 24
Programmable Call-Fwd Key
Call Forwarding through the Call-Fwd
Key 53
Programming the Call-Fwd Key 109
Programmable Line Keys
Calling a Busy Extension – Automatic Call-
Back 26
Calling a Busy Extension – Automatic
Camp-on 25
Calling a Free Extension – Automatic Call-
Back 27
Calling a Free Extension – Voice Page 28
Calling with Abbreviated Dialling 22
Calling with Line Keys 23
Calling with Manuall Dialling 21
Calling with Repertory Keys 23
Calling with the Call Log File 24
DTMF End-to-End Dialling 31
Calling with Line Keys 23
Extension Label Information 149
Programming Line Keys 107
Supervising with Line Keys 83
Programmable Repertory Keys
Accessing the Programming Mode 106
Calling with Repertory Keys 23
Consulting the Dialling Plan 115
162
MD Evolution – Dialog 4223 Professional
Index
Directory Label Information 154
Programming a Variable Call Forward 50
Programming Line Keys 107
Sending a Mini-Message 60
Programming the Loudspeaker Listening
Volume 111
U
Unified Messaging 80
User Password
Supervising with Repertory Keys 83
Voice Page – Programming 112
V
Q
QSIG-MD Private Network Services
Call Forwarding to Voice Mail 65
Message 73
Private Network – Non-IP Hand-Over 146
Private Network – Services Available 144
VoIP and QSIG-MD Private Networks 143
Quality of Greeting – Consulting 139
Consulting Voice Messages Locally 68
Hunt Group Common Mailbox 76
Internal Notification of Messages 67
Personal Assistant – Services 73
R
Retrieving a Parked Call 42
S
Secret of Identity 100
Silent Call Monitoring 118
Standby within a Hunt Group 86
Substitution or Signature on Call 30
System General Call Forward 130
System Programming by Attendants
Accessing the System Programming
Mode 134
Consulting the Greeting Quality 139
Management – System Date and Time 136
Management of Abbreviated Dialling 136
Password Re-initialisation 135
Processing the Charges Counters 140
Viewing an Alarm Message 141
System Switching from Day to Night 128
Voice Paging – Programming 112
Voice Paging a Broadcast Group 90
Voice Paging a Free Extension 28
Y
Your Extension’s Accessories
Additional Repertory Keys – Installation 152
Additional Repertory Keys – Labels 154
Add-on Interface Module 155
Headset – Connection 156
Headset – Use 157
T
Temporary Protection – Calling with 29
Text Messages (Services of)
Call Forward on Mini-Message –
Absence 62
Headset – Validating the Connection 156
Receiving a Mini-Message 61
MD Evolution – Dialog 4223 Professional
163
Quick Reference Guide
Quick Reference Guide
This Quick Reference Guide for your Dialog 4223 Professional
extension briefly describes all of the services that your extension
offers you, as well as the detailed procedures for each case.
It also provides the instructions on how to install and maintain your
extension and its different potential accessories.
Your Dialog 4223 Professional extension is also the subject of a
two-sided Quick Reference Guide.
This summarises the main operating procedures for the services
offered by your extension.
If you would like a copy, contact your system administrator to
obtain a copy.
As with this present guide, you may download the latest version
from the following address:
http://www.aastra.com
164
MD Evolution – Dialog 4223 Professional
Quick Reference Guide
Notes
MD Evolution – Dialog 4223 Professional
165
Subject to alteration without prior notice.
For questions regarding the product,
please contact your Aastra Certified Sales Partner.
Also visit us on http://www.aastra.com
© Aastra Telecom Sweden AB 2008. All rights reserved.
EN/LZTBS 102 1950 R81A
|