BT110 Bluetooth®
Headset
What the LED colors mean
QUICKSTART
GUIDE
Charge the battery.
1. Plug the power adapter
into the top of the
headset.
Color
State
Meaning
The headset is currently charging.
When the battery is fully charged, the
LED turns off.
Steady
Red
Flashing
Flashing
The battery is low.
The headset is turned on.
Slow flash
(every 3
2. Charge battery for 8
hours or until the red LED
turns off.
Blue
The headset is paired to a Bluetooth
device.
seconds)
The headset is in Pairing mode (refer
to Pair the headset to your Bluetooth
phone).
Red &
blue
Alternating
flash
Pair the headset.
1. Power off the headset.
2. Press and hold Power until
the LED flashes red and
blue.
3. Search for Bluetooth
headsets or handsfree
devices from your phone.
Setting Up Your Headset
Charge the battery
Before using your headset, charge the battery for at least
8 hours. Charging the battery completely (and keeping it
charged) will help you get the longest possible talk and
standby time out of the battery.
USER’S
GUIDE
4. If prompted for a PIN/
Also in this package:
password, enter 0000.
2 extra ear cushions
Use ONLY the power adapter supplied with the headset! Using any
other adapter could damage your headset, create a fire hazard, or
cause a risk of electric shock.
Use your headset.
To answer a call - press Power.
To hang up - press Power.
AC (indoor)
Connect the adapter to the power connector on the top of
the headset, then plug it into a standard 120 volt AC (regular
indoor) power outlet.
power adapter
To make a call - make the
call from your mobile phone;
your phone should send
the call to the headset. If it
doesn’t, press Power on the
headset.
Questions? Problems?
Get help on the web at
Pair the headset to your Bluetooth phone
Pairing is like “introducing”two Bluetooth devices and giving
them permission to connect to each other. If you want to use
the headset with more than one phone, you need to pair it
with each phone separately. Once a phone and the headset
are paired, they can connect automatically whenever they
detect each other.
or call our Customer Service line at
800-292-2294.
1. Make sure the headset is powered off and the power
adapter is not connected (you can’t use the headset while
it’s charging).
2. Press and hold Power until the LED flashes alternating red
and blue. The headset is in pairing mode and should be
visible to other Bluetooth devices.
3. On your phone, start a search for Bluetooth headsets or
handsfree devices. (This process may take several seconds,
and it will be different for each phone; see your phone’s
manual for detailed instructions.)
Getting to Know the Headset
CAUTION! Using the headset at high volume can cause
permanent hearing loss. To reduce the risk of hearing
damage, use the minimum volume level necessary (see
Avoid Hearing Damage section).
Power
button
Power
connecter
4. Your phone should discover a device called a BT110.
When your phone asks if you want to pair with this device,
answer yes.
LED
Ear
Ear hook
cushion
Speake
Volume
Down
button
5. If your phone prompts you for a PIN code or password to
pair with the BT110, enter 0000.
6. When the headset is paired, the LED turns blue and flashes
every 2 seconds. Your phone might display a confirmation
message, also.
Volume Up
button
Microphone
7. Your phone might ask if you want to change the headset’s
name; generally, you should only change the name if you
have more than one BT110 headset that you use with this
phone.
What the buttons do
Release the button to activate the function.
Press and hold it for two
seconds to
In standby: Turn the headset on
or off.
During an incoming call: Reject
the call.
Button
Power
Press it to
Connecting to your phone
Most phones connect to the headset as soon as you pair it; if
yours won’t, turn the headset off and back on. If the headset
still won’t connect, check your phone’s owner’s manual for
additional Bluetooth information.
Once the headset is paired:
• Whenever you turn the headset on, it will automatically try
to connect to whatever device it was connected to last.
During an incoming
call: Answers call.
During a call: Hangs up.
During a call: Increase
the call volume.
Volume Up
NA
During a call: Decrease Redial the most recently dialed
the call volume. number.
Volume Down
• If the headset loses the connection (e.g., if your phone is
out of range), it reconnects automatically. To manually
reconnect, press Power.
• If the headset goes more than 1 hour with no connection,
it automatically turns off.
criteria. For body worn operation, the FCC RF exposure guidelines were also met
when used with the Uniden accessories supplied or designed for this product. Use
of other accessories may not ensure compliance with FCC RF exposure guidelines
and should be avoided.
Safety and Handling Information
For maximum product life, do not drop, throw, or crush the
headset. Do not expose it to humidity, dust, or temperatures
above 125˚ F.
Industry Canada Statement
Cleaning the headset
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• If necessary, remove the ear cushion and earhook.
Dampen a lint-free cloth with water or a cleaner
specifically designed for electronics, and gently wipe the
headset clean.
• Do not expose this product to liquid (water, alcohol, etc.)
or submerse in liquid for any reason.
IMPORTANT NOTE: Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance with
IC RF exposure compliance requirements, please follow operation instruction as
documented in this manual.
Avoiding hearing damage
Using any headset or earbud at too high a volume can cause
permanent hearing damage. To reduce the risk of hearing
damage:
• Set the volume at the minimum level needed to hear in
the current environment. If possible, use your headset
in quiet surroundings or try to move to an area with less
background noise before adjusting the volume.
• Start with the volume at its lowest setting, then gradually
increase it until you can hear.
• Turn the volume down before powering off the headset
and readjust the volume each time you turn it on.
• If someone next to you can hear the other end of the call
through your headset or if your ears hurt or ring when you
hang up, the volume is too high.
• The longer your ears are exposed to noise, the greater
the risk of damage. Limit calls at higher volumes (or other
exposure to loud noise).
• For more information on protecting your hearing, visit the
consult an audiologist.
Lithium-polymer battery information
This device contains a lithium-polymer battery. The headset and battery must be
recycled or disposed of properly. Contact your local waste management office for
information on battery recycling or disposal.
Two-Year Limited Warranty
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for two years, to the original retail
owner, this Uniden Product to be free from defects in materials and craftsmanship
with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be
of no further effect 24 months after the date of original retail sale. The warranty is
invalid if the Product is a) damaged or not maintained as reasonable or necessary,
b) modified, altered, or used as part of any conversion kits, subassemblies, or
any configurations not sold by Uniden, c) improperly installed, d) serviced or
repaired by someone other than an authorized Uniden service center for a defect or
malfunction covered by this warranty, e) used in any conjunction with equipment
or parts or as part of any system not manufactured by Uniden, or f) installed or
programmed by anyone other than as detailed by the owner’s manual for this
product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will either, at its
option, repair or replace the defective unit and return it to you without charge
for parts, service, or any other cost (except shipping and handling) incurred
by warrantor or its representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit with a new or refurbished
unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR
ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow
this exclusion or limitation of incidental or consequential damages so the above
limitation or exclusion may not apply to you.
Important Safety Instructions
Uniden America Corporation DOES NOT represent this product to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the product, DO NOT expose this product to rain or moisture.
When using the headset, always follow basic safety
precautions to reduce the risk of fire, electric shock and injury
to persons, including the following:
• Do not use this product near water, for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
• Use only the power cord and batteries indicated in this
manual. Do not expose the battery (or the device) to
flames or dispose of it in a fire: the battery may explode.
Check with local authorities for possible battery disposal
instructions.
• Do not disassemble, modify, or attempt to repair any
component of this product.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. This warranty is void outside the
United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the
instructions in the owner’s manual you are certain that the Product is defective,
pack the Product carefully (preferably in its original packaging). The Product should
include all parts and accessories originally packaged with the Product. Include
evidence of original purchase and a note describing the defect that has caused you
to return it. The Product should be shipped freight prepaid, by traceable means, to
warrantor at:
• Check the laws and regulations on the use of mobile
phones and hands-free equipment in the areas where you
drive. Always give full attention to driving and pull off the
road and park before making or answering a call if driving
conditions require.
• Do not allow children to play with your headset since it
contains small parts that could become detached and
create a choking hazard.
• Turn off your headset when pumping gas, handling
flammable materials, or in any area with a risk of explosion.
In rare occurrences, this product could generate sparks
which can cause an explosion or fire. Follow all warning
notices in your immediate area!
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
SAVE THESE INSTRUCTIONS!
FCC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation. Privacy of communications may not be ensured
when using this product.
To insure the safety of users, the FCC has established criteria for the amount of
radio frequency energy various products may produce depending on their intended
usage. This product has been tested and found to comply with the FCC’s exposure
|