Leading Innovation
USER'S MANUAL
Color LCD Monitor
Owner’s Record
The model number and serial number are on the
back of your monitor. Record these numbers in the
spaces below Refer to these numbers whenever you
communicate with your Toshiba dealer about this
monitor.
P 1 7 1 0 A
Model Number:
Serial Number:
P 1 9 1 0 A
TOSHIBA CORPORATION
Part Number:
V.2.0
Important Information
For information on our latest products and peripheral devices, refer to the following Website:
If the URL changes, refer to the Toshiba website (http://www.toshiba.com/).
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Table of Contents
Important Information
Dear Customer,
2
3
Important Safeguards
Disclaimer
3
WARNING
RISK OF ELECTRIC
6
SHOCK DO NOT OPEN
Usage Limitation
6
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Notes on Use and Installation
Monitor Installation
1.Desktop intstallation
6
7
7
2.Wall Mount Installation
7
3.Rack mount installation
8
AC Adapter
9
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
LCD panel
10
10
10
11
12
12
13
13
13
13
14
16
19
Components
External View and Physical Description
Input and Output connectors
Setup for Monitor
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
1.Front control panel
2.Selection of input signal
3. Adjustment of contrast and Brightness
4.Lock a switch and unlock
5.Menu function
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
6.VGA / DVI Menu and definition of functions
7.Composite Video OSD Menu and definition of functions
P1710A / P1910A Specification
FIELD INSTALLATION MARKING:
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM
TO ALL LOCAL CODES.
LIMITED WARRANTY
1
2
4. Follow Instructions
USA - FCC Statement
Follow all operating and use instructions.
FCC Declaration of Conformity Statement
Product name: Color LCD Monitor
5. Cleaning
Disconnect this monitor from the power supply before cleaning.
Model number: P1710A P1910A
6. Attachments
The Toshiba Color LCD Monitor complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The party responsible for compliance to these rules is:
Do not use attachments not recommended by the monitor manufacturer as they may pose safety risks.
7. Water and Moisture
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
9740 IRVINE BLVD., IRVINE, CA 92618-1697
Do not use this monitor near water. Some examples are: near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool.
TEL: (949) 583-3000
8. Accessories
NOTE:
Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing
serious injury to a person, or serious damage to the product. Use only with stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the monitor. Any mounting of the product should follow the
manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
9. Ventilation
This monitor should never be placed near or over a radiator or heat register. If this product is placed in a
built in installation verify that there is proper ventilation so that the monitor temperature operates within the
recommended temperature range.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
10. Power Sources
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This monitor should be operated only from the type of power source indicated on the information label. If you
are not sure of the type of power supply at your location, consult your product dealer.
11. Power-Cord Protection
CAUTION:
Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at plugs, screws and the point where they exit the product.
Changes or modifications to this equipment not expressly approved by Toshiba America Information Systems,
Inc. could void the user’s authority to operate this equipment.
12. Installation
Install this monitor on a secure part of the ceiling or wall. If installed on an unsecured location, the monitor
could fall causing injury and damage.
Dear Customer,
Thank you for purchasing the Color LCD Monitor. Before using the monitor, read this User's Manual carefully to
ensure correct usage. Once you have finished reading this User's Manual, keep it in a convenient place for future
reference.
13. Lightning
For additional protection on this monitor during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This
will prevent damage to the monitor due to lightning and powerline surges. If lightning occurs, do not touch the
unit or any connected cables in order to avoid electric shock.
The design, specifications, software, and User's Manual contents are subject to change without prior notice.
14. Overloading
Do not overload the power supply or extension cords as this can result in a risk of fire or electric shock.
Important Safeguards
15. Object and Liquid Entry
1. Read Instructions
Never push objects of any kind into this monitor through openings as they may touch dangerous electrical
points or short-out parts that could result in a fire or electrical shock. Never intentionally spill liquid of any kind
on the monitor.
Read all the safety and operating instructions before operating the product.
2. Retain Instructions
Retain the safety instructions and user's manual for future reference.
16. Heat
Keep the product away from direct sunlight, fire or a heat source such as a heater, radiators, or other
products (including amplifiers) that produce heat. This may reduce the product lifetime or result in fire.
3. Warnings
Comply with all warnings on the product and in the user's manual.
3
4
17. Connecting
When you connect this product to other equipment, turn off the power and unplug all of the equipment from
Disclaimer
the wall outlet. Failure to do so could cause damage to this product. Read the owner’s manual of the other
equipment carefully and follow the instructions when making any connections.
We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any
of the following cases:
18. LCD panel
1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or
accidental; use under extreme operating conditions.
Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may
occur. Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause
poisoning. If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes
have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.
2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not
limited to loss of expected income and suspension of business activities.
3. Incorrect use not in compliance with instructions in this user's manual.
19. Servicing
4. Malfunctions resulting from misconnection to other equipment.
Do not attempt to service this monitor yourself as opening or removing covers may expose you to dangerous
5. Repairs or modifications made by the user or caused to be made by the user and carried out by an
electrical or other hazards. Refer all servicing to qualified service personnel.
unauthorized third party.
6. Notwithstanding the foregoing, Toshiba's liabilities shall not, in any circumstances, exceed the purchase
price of the product.
20. Damage Requiring Service
Disconnect this monitor from the power supply and refer servicing to qualified service personnel under the
following conditions.
Usage Limitation
The product is not designed for any "critical applications." "Critical applications" means life support systems,
exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications,
military applications, homeland security applications, nuclear facilities or systems or any other applications where
product failure could lead to injury to persons or loss of life or catastrophic property damage.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the monitor.
c. If the monitor has been submerged in water.
d. If the monitor does not operate normally by following the operating instructions in the user's manual.
Adjust only those controls that are covered by the user's manual as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the monitor to its normal operation.
Accordingly, Toshiba/TAIS disclaims any and all liability arising out of the use of the product in any critical
applications.
e. If the monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibiting a distinct change in performance which indicates a need for service.
g. Other trouble.
Notes on Use and Installation
Treat the monitor with care
Dropping or subjecting the monitor to intense vibration may cause it to malfunction.
21. Replacement Parts
When replacing parts be sure the service technician uses parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other
hazards.
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products
touching the unit for a long time. They will leave marks on the finish. Do not use a chemically saturated cloth.
22. Safety Check
Upon completion of any service or repairs to this monitor, ask the service technician to perform safety checks
to determine that the monitor is in proper operating condition.
Never touch internal parts
Do not touch the internal parts of the monitor other than the parts specified.
Keep the monitor installation away from video noise
If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event relocate
cables or reinstall equipment.
The cold cathode fluorescent lamp contains a small amount of mercury. When the monitor reached the end
of its useful life, dispose of the used monitor by the approved method in your area, or ask a qualified service
technician to properly dispose of the monitor.
Check the ambient temperature and humidity
Avoid using the monitor where the temperature is hotter or colder than the specified operating range. Doing
so could affect the internal parts or cause the image quality to deteriorate. Special care is required to use the
monitor at high temperature and humidity.
NOTE:
Should you notice any trouble
The lamp(s) inside this product contain mercury. Disposal may be regulated due to
environmental considerations. For disposal or recycling information, contact your local
authorized dealer or the Electronics Industries Alliance at
If any trouble occurs while you are using the monitor, turn off the power and contact your dealer. If you continue
to use the monitor when there is something wrong with it, the trouble may get worse and an unpredictable
problem may occur.
5
6
(5) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the monitor.
Monitor Installation
1.Desktop intstallation
Observe the following safety precautions:
(1) Read and Follow the pedestal assembly instructions.
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned
surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the
pedestal mentioned below.
① Extreme care should always be used when attaching the
pedestal stand to avoid damage to the LCD panel.
Insert the back stand to the pedestal until it clicks.
Check that the back stand and pedestal are firmly attached
3.Rack mount installation
and that the back stand is firmly attached to the LCD monitor.
If you decide to the Rack mount your LCD monitor, always use a dedicated rack mount bracket below.
P1710A: ERK-17
P1910A: ERK-19
(2) Place the LCD monitor on a sturdy, level surface that can support the weight of the monitor.
Note: Rack mount bracket is not included. It is sold separately.
Viewing Angle:
1) CAUTION: Two people are required for installation.
For the user’s convenience, the LCD screen may be tilted according to their viewing requirements. The
monitor can be tilted forward up to 25 degrees or backward up to 5 degrees.
2) Unplug and remove any cables and/or other component connectors from the monitor.
3) Remove the screws and back stand. Remove the rivets on the side of monitor.
4) Always use the screws supplied by the rack mount bracket, and secure the bracket to the monitor.
2.Wall Mount Installation
If you decide to wall mount your LCD monitor, always use VESA wall bracket appropriate for the size and
weight of the LCD monitor.
5) Follow the instructions provided with your rack. And secure the monitor to the rack by appropriate
screws.
VESA Mounting Pattern:
Hole Pattern (HxV): 100x100 mm
Screw Size: M4
(1) CAUTION: Two people are required for installation.
(2) Unplug and remove any cables and/or other component
connectors from the monitor.
(3) Remove the screws and back stand shown.
(4) Always use the screws supplied or recommended by
the wall mount manufacturer.
Note: Use appropriate screws up to 12mm long with
flat washer and spring washer.
7
8
AC Adapter
LCD panel
The following symptoms are technical limitations of LCD Display technology and are not an indication of
malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.
Precautions for Use
Be sure to use only the supplied AC adapter. Using a different AC adapter may cause the
monitor to malfunction, heat up, or catch fire. Before using the AC adapter, carefully read and
observe the Important Safeguards ( → page 3) and the notes below.
An afterimage (ghost) may appear on the screen if a fixed, nonmoving image is displayed for a long period
of time. The afterimage is not permanent and will disappear in a short period of time.
Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-240V AC outlet, it may
The LCD panel contained in this Monitor is manufactured using an extremely high level of precision
technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does
not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of
malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed
from a normal viewing distance.
result in electric shock or fire hazard.
Do not repair, modify or disassemble the AC adapter. It may result in electric shock or fire hazard.
Keep the Plug free from any dust or dirt. Neglecting to do so may cause a fire due to deterioration of the
insulation. Pull out the power plug from the outlet before cleaning.
The fluorescent tube which illuminates the panel from the inside will deteriorate with use. When the LCD
Do not cover or wrap the AC adapter with a cloth or place it near heating devices. It may cause fire or
becomes dim, flickers, or does not illuminate, contact your dealer for replacement.
malfunction of the unit.
The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to
Protect the power cord from being:
obtain the best viewing.
• damaged, modified for extension, or subjected to extreme heat.
• pulled, located under heavy objects, or pinched.
• bent, twisted, or bundled.
Components
Neglecting to do so may cause electric shock or fire hazard.
Color LCD Monitor x1
Do not expose this AC adapter to water.
Accessories
Install the AC adapter properly on a wall or ceiling after plugging in the AC adapter. Avoid dropping the AC
adapter, failing to do so may cause serious personal injury or death.
• AC adapter x 1
• Power cord x 1
• VGA Cable x 1
• Pedestal x 1
Do not allow the connectors on the AC adapter to come into contact with any other metal object as this may
result in short circuit.
To connect the AC adapter, firmly insert the plug end of the cable into the AC adapter jack.
• User’s Manual x 1
Do not insert the plug into other jacks as this may cause a malfunction.
When removing the connection cable, disconnect the cable by holding its plug. Do not disconnect the cable
by pulling on the cable.
External View and Physical Description
Do not drop the AC adapter or subject it to strong impact.
Do not use the AC adapter in hot and humid places.
Do not use the supplied AC adapter with devices other than this monitor.
P1710A
Temperature increasing on the surface of the adapter is normal. Before moving the adapter to another
15.193 (385.89)
13.425 (341)
location, unplug it from the wall outlet, and wait until its temperature decreases.
Buzzing noises may come from inside. This does not indicate malfunction.
Using the AC adapter near a radio, TV, cell phone, or any wireless devices/equipment may cause
interference. Use the adapter at sufficient distances from these devices.
Input and output connectors
Threaded
hole for
rack mount
bracket
P1710A
Be sure to use the supplied AC adapter. Using different AC adapter may cause fire hazard or the monitor to
LCD Panel
malfunction.
Threaded hole for VESA
wall bracket
Specifications
Model: EA10521E-120 ( This is for P1710A and P1910A )
Power source: 100-240V AC 1.8A, 50/60 Hz
Rated output: 12V DC 3.5A
3.031
(77)
2.165
(55)
Back stand
inch(mm)
Pedestal
7.874 (200)
9.449 (240)
Ambient temperature guaranteed for performance: 0° C to 40° C (32° F to 104° F)
Storage temperature: -20° C to 85° C (-4° F to 185° F)
Maximum external dimensions (Length x width x height): 120 x 60 x 35 mm (4.72 x 2.36 x 1.38 inches)
DC cord length: 1500 mm (59 inches)
Mono Speaker
Front control panel
9
10
P1910A
BNC 2 IN: Input connector of Video. (BNC connector)
Type
Composite video (NTSC or PAL)
75Ω
Input impedance
16.7 (424.19)
14.933 (379.3)
Note: This video channel is shown as “AV1” on the screen.
BNC 2 OUT: Output connector of Video.(BNC connector)
Type
Output impedance
Composite video (NTSC or PAL)
75Ω
Input and output connectors
Threaded
hole for
P1910A
rack mount
bracket
LCD Panel
Threaded hole for VESA
wall bracket
AUDIO IN: Input connector of Audio. (RCA Jack)
Input
0.5Vrms @1KHz (Mono)
AUDIO OUT: Output connector of Audio. (RCA Jack)
Back stand
2.913
(74)
2.283
(58)
Output
Maximum 0.85Vrms @1KHz (Mono)
Pedestal
inch(mm)
7.874 (200)
9.449 (240)
Note: Audio output signal is controlled by the volume in the OSD.
Mono Speaker
Front control panel
Input and Output connectors
Setup for Monitor
DC 12V IN: Input connector of power. Connect to the output cable of AC adapter.
DVI IN: Input connector of DVI-D format RGB.
Type
TDMS Digital RGB.
Input impedance
100Ω (differential)
Note:
• DVI-D doesn’t support audio signal. Connect audio cable separately.
1.Front control panel
Power Switch: Push to switch power on/off.
①
• DVI-D doesn’t support analog RGB and digital component signals. If you convert this connector to HDMI,
it is able to support digital RGB only.
LED Indicator: Power light indicator.
②
• This monitor doesn’t support HDCP(High-bandwidth Digital Content Protection) signal. Don’t connect to
: This switch has multi-function mentioned below.
[+ Mode]
③
④
⑤
the HDMI connector of DVD player.
(1) Push to change input Source. (VGA, DVI, AV, AV1)
(2) Push to select Picture, Setup or PC in Menu.
(3) Push to increase the value of Menu selected.
VGA IN: Input connector of analog RGB.
Type
Analog RGB (VGA)
Input impedance
75Ω
: This switch has multi-function mentioned below.
[− Auto]
BNC 1 IN: Input connector of Video. (BNC connector)
(1) VGA signal auto adjustment.
Type
Input impedance
Composite video (NTSC or PAL)
75Ω
(2) Push to select Picture, Setup or PC in OSD Menu.
(3) Push to decrease the value of Menu selected.
Note: This video channel is shown as “AV” on the screen.
[
]
: This switch has multi-function mentioned below.
(1) Select Menu upwards.
BNC 1 OUT: Output connector of Video.(BNC connector)
(2) Push this switch to adjust contrast directly,
Type
Composite video (NTSC or PAL)
and push [+ Mode] or [− Auto] to change the value of contrast.
Output impedance
75Ω
11
12
[
]
6.VGA / DVI Menu and definition of functions
: This switch has multi-function mentioned below.
⑥
⑦
(1) Select Menu downwards.
(2) Push this switch to adjust brightness directly,
(1) VGA / DVI – Picture tab
and push [+ Mode] or [− Auto] to change the value of brightness.
[ Menu ]
: Call or close the Menu. Push to return to the previous item
2.Selection of input signal
Brightness
<
50
50
0
>
>
>
>
>
>
>
>
Contrast
<
<
Source
VGA
DVI
(1) Push the [+ Mode] switch.
Sharpness
[
]
[
]
(2) The following OSD is shown. Push the
switch to select input signal.
or
Hue
Color
50
50
<
<
(3) Push the [+ Mode] switch again.
(4) Push the [ Menu ] switch to clear.
AV
Full
Display Mode
Color Temp
<
<
<
AV1
User
Color Temp R
50
Picture
Setup
PC
3. Adjustment of contrast and Brightness
* Above items and value are subject to change without notice *
[
]
[
]
(1) Push the
or
switch.
(2) The adjustment window is shown. Push the [+ Mode] or [− Auto] switch to adjust to the appropriate
value.
(3) Push the [ Menu ] switch to clear this window. (Or, adjustment window will disappear within 10 seconds
Menu
Value
0~100
Definition of functions
Adjust the luminance level of the
screen image
automatically.)
Brightness
Adjust the contrast level of the
screen image
Adjust the sharpness of the screen
image
Adjust the saturation of color of the
screen image
Contrast
0~100
0~100
0~100
4.Lock a switch and unlock
[ Menu ]
[
]
(1) Push the
and
switch at once.
Sharpness(*)
Color(*)
(2) “LOCK” is shown on the screen. And all switches are suspended.
[ Menu ]
[
]
(3) Push the
and
switch at once again.
Push [+] or [−] switch to choose the
(4) “UNLOCK” is shown on the screen and released.
User (individual setting)
color temperature (If you set “User”,
Color Temp.
sRGB(6500K)/7500k/9300K the following settings become
effective.)
5.Menu function
Adjust color value of Red of the
screen image
Adjust color value of Green of the
screen image
Adjust color value of Blue of the
screen image
Color Temp R
Color Temp G
Color Temp B
0~100
(1) Push the [ Menu ] switch.
(2) The Menu is divided into three tabs, Picture, Setup and PC.
They will appear under selected source signal.
• VGA: Picture, Setup and PC tab will be shown.
• DVI, AV, and AV1: Picture and Setup tab will be shown.
0~100
0~100
[
]
[
]
(3) Push the
or
switch to select menu item.
(*) DVI input only.
(4) Push the [+ Mode] or [− Auto] switch to change the value of selected item.
(5) Push the Menu switch to accept and return to the previous item.
13
14
(2)VGA / DVI - Setup tab
(3) VGA – PC tab (VGA input only)
Image H Position
Image V Position
Phase
50
50
0
<
<
<
<
>
>
>
>
>
OSD H Position
50
82
60
50
<
<
<
<
<
<
<
>
>
>
>
>
>
>
OSD V Position
OSD Time out
Volume
Clock
40
Auto Adjust
Language
Back Light
N.R.
English
High
Middle
PIP Set
>
Picture
Setup
PC
Picture
Setup
PC
* Above items and value are subject to change without notice *
* Above items and value are subject to change without notice *
Menu
Value
Definition of functions
Image H Position 0~100
Image V Position 0~100
Adjust the horizontal position of the screen image
Adjust the vertical position of the screen image
Adjust the phase right to display clear image on the screen
Adjust the clock right to display clear image on the screen
Push [+] or [−] to set automatic adjustment of monitor setting
Menu
Value
Definition of functions
Adjust the horizontal position of
Menu on the screen
Adjust the vertical position of Menu
on the screen
Phase
Clock
0~63
0~90
OSD H-Position 0~100
OSD V-Position 0~100
Auto Adjust
Note: These adjustments work for VGA input only.
Adjust the time-out period from
Menu mode
Push [+] or [−] switch to control the
speaker volume
OSD Time Out
Volume
5~60
0~100
7.Composite Video OSD Menu and definition of functions
English, a couple of Chinese,
German, French, Spanish, Italian
Language
Backlight
Select your language of OSD
(1) AV, AV1 (Video) – Picture tab
Push [+] or [−] switch to adjust the
back light of LCD
High, Middle, Low
Push [+] or [−] switch to adjust the
level of noise reduction of the screen
image
N.R.
0~100
Push [+] switch to enter the sub-
menu
Push [+] switch to reset to the
default value
PIP Set
Reset
0~100
Brightness
Contrast
50
50
50
50
50
<
<
<
<
<
<
<
>
>
>
>
>
>
>
>
Off, High, Middle, Low
Sharpness
Hue
Color
Full
Display Mode
Color Temp
Color Temp R
User
51
<
Picture
Setup
* Above items and value are subject to change without notice *
15
16
(3) PIP mode Setup
Menu
Brightness
Contrast
Value
0~100
0~100
0~100
Definition of functions
Adjust luminance level of the screen image
Adjust contrast level of the screen image
Adjust the sharpness of the screen image
Adjust the hue of color of the screen image
(NTSC video only)
Sharpness(*)
Hue
0~100
0~100
Color(*)
Adjust the saturation of color of the screen image
VGA
Small
Source
Display Mode
Full, 4:3, 16:9, Over, Under, 1:1 Adjust the display scan mode
<
<
<
>
>
>
>
Push [+] or [−] button to choose the color
temperature
Color Temp.
Warm/Cool/User
Multi Picture
PIP Position
PIP Swap
Color Temp R
Color Temp G
Color Temp B
0~100
0~100
0~100
Adjust color value of Red of the screen image
Adjust color value of Green of the screen image
Adjust color value of Blue of the screen image
PIP Position 1
Setup / PIP Set
(2) AV, AV1 – Setup
* Above items and value are subject to change without notice *
Menu
Value
(1)
Definition of functions
Push [+] or [−] switch to select the source on sub
screen
Source
None, Small, Middle, Large, POP Push [+] or [−] to select the PIP mode and size of
OSD H Position
OSD V Position
OSD Time out
Volume
50
>
<
<
<
<
<
<
<
>
Multi picture
PIP Position
PIP Swap
(2)
PIP screen
82
>
Push [+] or [−] to select the position of PIP
screen
PIP Position 1, 2, 3, 4, and 5 (3)
60
>
Under PIP mode, push [+] to swap main screen
for PIP screen
50
>
Language
Back Light
N.R.
English
>
High
>
Middle
>
(1) For this selection, there will be a difference in the source value you selected on the main screen.
PIP Set
Note: If you select composite video on the main screen, you cannot select other composite video on the
PIP screen.
Picture
Setup
*
Above items and value are subject to change without notice *
(2) None: PIP mode OFF
Small: Full width at fifth maximum
Middle: Full width at fourth maximum
Large: Full width at third maximum
POP: Split screen
Note: This setup is the same as VGA / DVI - Setup tab on page 15.
(3) Position 1: Upper left
Position 2: Lower left
Position 3: Middle
Position 4: Upper right
Position 5: Lower right
Note: When PIP window is shown, if you select VGA input, the auto adjust doesn’t work.
17
18
P1710A / P1910A Specification
MEMO
Model Number
Panel Size
P1710A
17.0”
P1910A
19.0”
Aspect Ratio
5:4
5:4
640 x 480 @ 60/73/75
800 x 600 @ 56/60/72/75
1024 x 768 @ 60/70/75
1280 x 1024 @ 60/75
380cd/m2 (Typ.) (1)
1000:1(Typ.) (1)
170° / 170°(Typ.) (1)
5ms(Typ.)(1)
640 x 480 @ 60/73/75
800 x 600 @ 56/60/72/75
1024 x 768 @ 60/70/75
1280 x 1024 @ 60/75
250cd/m2 (Typ.) (1)
1000:1(Typ.) (1)
170° / 170°(Typ.) (1)
5ms(Typ.) (1)
16.7M
Resolution / Scan
Brightness
Contrast
Panel Viewing Angle(H/V)
Response Time
Display color
16.7M
Sync. Format
NTSC / PAL
Frequency (Horizontal)
Frequency (Vertical)
Video Interface
VGA/DVI: 31.5K - 80KHz, Video: 15750 / 15625Hz (NTSC/ PAL) (2)
VGA/DVI: 56Hz -75Hz, Video: 50 / 60Hz (2)
Video Input x 2 (BNC), Video Output x 2 (BNC)
75 ohm (Auto Termination)
Termination
Graphic Interface
Interfaces
Analog RGB Input x 1(D-Sub 15), Digital RGB (DVI-D) Input x 1
Audio Input x 1, Audio Output(volume engaged) x 1
1W x 1
Audio Interface
Built-in Speakers
PIP
YES
English, Traditional Chinese, Simplified Chinese, French, German,
Spanish, Italian
OSD Language
VESA Mounting
Weight (NET)
VESA 100
10.2lb (4.6kg)
10.9lb (4.8kg)
15.2x16.0x9.4 inch
(386x407x240 mm)
16.7x17.2x9.4 inch
(424x437x240 mm)
External Dimensions (WxHxD)
Safety & EMI
AC adapter : UL, CUL, FCC/B
Monitor : FCC/B
Power supply
12V DC ± 10 %
Current Consumption (max.)
Temp (Oper.)
Humidity
12V DC / 3A
12V DC / 2A
32°F – 104°F (0°C-40°C)
20% ~ 80%
Accessories
Pedestal, AC Adapter, Power cord, VGA cable, User’s Manual
Design and Specifications are subject to change without notice.
(1) These values of specification are from panel spec.
(2) It is not guaranteed for all the specified range.
19
20
MEMO
MEMO
21
22
|