Tiffen Pro T User Manual

Brackets for Cameras with Built-in  
Pro-T  
or Accessory Grips  
Pro-T and  
SLIM, LIGHT  
Press-T  
AND FAST  
Our lightest, fastest,  
professional brackets.  
The Pro-T and Press-T are flash-  
rotating brackets. Both are light,  
compact and fast-handling. The flash  
arm swings to keep the flash  
centered over the lens for both  
horizontal and vertical compositions.  
These brackets do not require the use  
of a cable release.  
Brackets shown with  
optional flash mount  
(Shoe Mount 300-SHO)  
Unlike conventional brackets,  
the Pro-T is designed for you to  
hold the camera rather than the  
bracket, providing a more natural  
way of shooting. It allows you to  
switch between horizontal and  
vertical compositions instantly.  
The Press-T is a slightly  
shorter and even more compact  
version of the Pro-T. It is popular  
with photojournalists and other  
shooters who work out of a  
camera bag.  
EVEN MORE  
COMPACT  
*Note: When using Pro-T or Press-T  
model brackets with heavier flash  
units, we consider the use of a Camera  
Anti-Twist Plate mandatory  
(the Pro-T/m has this feature built in).  
Pro-T/m  
Features:  
Pivoting, machined flash arm  
keeps the flash centered above the  
lens for both horizontal and vertical  
compositions.  
Solid, machined aluminum  
components combine to provide  
lightweight, superior rigidity and  
extraordinary balance.  
• Integral QR (Quick-Release) Plate  
mates to optional QR Receiver,  
allowing the bracket and tripod to be  
attached or detached instantly.  
Pro-T incorporates 3° downward  
flash tilt for both horizontal and  
vertical compositions. This improves  
lighting coverage for typical flash  
shooting distances.  
Press-T Specifications  
Pro-T and Pro-T/m  
Specifications  
Net Weight: 14 oz.  
Bracket Height: 9.25"  
Nominal Lens-to-Flash Distance: 12"  
Includes: 1/4"-20 camera mounting  
screw & flash mounting knob, cork  
base pad, flash arm adjustment  
wrench  
Suggested Accessories: Camera  
Anti-Twist Plates (not required for  
Pro-T/m), Flash Mounts, Camera  
and Flash Quick Releases  
Net Weight: 11 oz.  
Bracket Height: 7.0"  
Nominal Lens-to-Flash Distance: 10"  
Includes: 1/4"-20 camera mounting  
screw & flash mounting knob, cork  
base pad, flash arm adjustment  
wrench  
Suggested Accessories: Camera  
Anti-Twist Plates, Flash Mounts,  
Camera and Flash Quick Releases  
For Mamiya  
We also offer the Pro-T/m, a model  
made specifically for the Mamiya 6,  
6MF and 7 rangefinder cameras.  
The base is configured to allow full  
access to all Mamiya baseplate  
controls. You can load film and  
change lenses easily without  
removing the camera from the  
bracket! This bracket also has a  
built-in camera anti-twist system.  
Catalog Number: 310-810  
Catalog Number: 310-800 (Pro-T)  
Catalog Number: 310-807 (Pro-T/m)  
Fully compatible with cameras  
with accessory battery packs or  
motor drives.  
Accepts all Stroboframe flash  
mounts, Camera Anti-Twist Plates*  
and Quick-Release (QR) accessories.  
Stroboframe • Stroboframe  

Winegard Car Satellite TV System MM 3084 User Manual
Toshiba MA 120 Series User Manual
Sony XVM F65 User Manual
Sony VCT 550RM User Manual
Sony SAL 55300 User Manual
Sony Car Stereo System DSR 80 User Manual
Sharp UP 820N User Manual
Sharp Calculator EL 509V User Manual
Samsung Camcorder HMX F90 User Manual
Rolls Car Speaker PM52 User Manual