Tatung TLM 1506 User Manual

OPERATING INSTRUCTIONS  
TLM-1506 / TLM-1706 / TLM-1906  
FCC INFORMATION  
This equipment has been tested and found to comply with the limits for a class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
Shielded interface cables and A.C. power cord, if any, must be used in order to comply  
with emission limits.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.  
CE INFORMATION  
The product must be installed according to the currently valid installation regulations for  
EMC to guarantee the designed use and to prevent EMC problems.  
The device supplied with this manual is according to the EC, EMC Directive,  
89/336/EEC & LVD 73/23/EEC  
Standard used for showing compliance with the essential requirements of the device:  
EN 55022  
EN 61000-3-2  
EN 61000-3-3  
EN 50130-4  
EN 55024  
LVD: EN60950-1  
SAFETY PRECAUTIONS  
1. Do not modify the three-prong grounding type monitor power plug in any way.  
2. Operate this unit only from the type of power source indicated on the label.  
3. Do not block or cover ventilation openings on the back or bottom of the monitor  
cabinet.  
3
4. Do not place this monitor near a radiator or heating vent.  
5. Do not push objects of any kind through cabinet openings. This may result in fire or  
electrical shock.  
6. Before adding attachments always ask a service technician to perform routine safety  
tests to determine that equipment is in safe operating condition. Ground potential tests  
should be part of the routine safety check made by the service technician.  
7. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure  
personnel or damage equipment.  
8. Route power cords so that they cannot be walked upon or tripped over. Do not allow  
anything to rest on the power cord.  
9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not  
spill liquid of any kind on the unit.  
10.Unplug the power cord from the unit before cleaning the display. Use only a damp cloth.  
Do not use alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO  
CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION MUST BE PERFORMED BY  
THE SERVICE TECHNICIAN AS REQUIRED DURING NORMAL MAINTENANCE.  
11.Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY  
UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO DANGEROUS  
VOLTAGES OR OTHER HAZARDS.  
12.Unplug the unit immediately and notify the service technician.  
A. If liquid has been spilled into the display or the display has been exposed to rain or  
water.  
B. If the unit has been dropped or the cabinet damaged.  
C. If fuses continue to blow.  
D. If the power cord is damaged or frayed.  
E. If a distinct change from normal operation is apparent.  
When replacement parts are required, be sure that the service technician uses  
components specified by the manufacturer which have the same characteristics as the  
original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL  
SHOCK OR OTHER HAZARDS.  
Upon completion of any service or repairs, ask the technician to perform safety checks to  
determine that the equipment is in safe operating condition.  
WARNING: SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF THIS  
MONITOR. DO NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES,  
THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE  
4
1. Scope  
This specification is used to define the performance of TLM-1506 / TLM-1706 / TLM-1906  
color TFT LCD monitor. This system supports both video input and PC VGA input. In video  
input mode, the system can automatically detect the NTSC signal and PAL signal. In PC  
mode, TLM-1506 can support up to 1024x768 VESA standards. TLM-1706 and TLM-1906  
can support up to 1280x1024 VESA standards.  
2. Unpacking  
After you unpack your LCD monitor, make sure the following items are included in the box  
and in good condition:  
z 15”, 17” or 19” LCD monitor.  
z Monitor to PC analog signal cable (15 pin).  
z Power cord, US type, 6-ft long, black.  
z Operating Instructions.  
3. Functional Specifications  
Power Supply  
The power supply spec is listed below,  
AC INPUT  
*AC power input range: 100 – 240 VAC, 60/50Hz, 1.5Arms (Max)  
* Power consumption: TLM-1506 and TLM-1706: 32W (Max)  
TLM-1906: 40W (Max)  
LCD Panel:  
TLM-1506  
TLM-1706  
TLM-1906  
Type  
Screen Size  
Viewable Picture Area  
Pixel Pitch  
Resolution  
Aspect Ratio  
Display Colors  
Response Time  
Back Light Life Time  
15” TFT LCD  
17” TFT LCD  
337.9(H) x 270.3(V) mm2  
431.8mm (17 in) diagonal 482.6mm (19 in) diagonal  
19” TFT LCD  
304.1(H) x 228.1(V) mm2  
381mm (15 in) diagonal  
0.297(H) x 0.297(V)mm  
1024 x 768 pixels  
4:3  
396.0(H) x324.0(V) mm2  
0.264(H) x 0.264(V)mm  
1280 x 1024 pixels  
0.294(H) x 0.294(V)mm  
1280 x 1024 pixels  
5:4  
16.7M  
5ms  
5:4  
16.7M  
5ms  
16.2M  
8ms  
50,000  
50,000  
50,000  
5
Optical Characteristics:  
TLM-1506  
TLM-1706  
TLM1906  
Luminance  
450 cd/m2  
300 cd/m2  
1000:1  
300 cd/m2  
1000:1  
Contrast Ratio 500:1  
Viewing Angle 140o Horizontal,125o Vertical 160o Horizontal,160o Vertical 160o Horizontal,160o Vertical  
Video Characteristics:  
Composite Video (CVBS): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75  
unbalanced termination to Hi-Z with loop-through operation.  
Y/C (S-video): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 unbalanced  
termination to Hi-Z with loop-through operation.  
VGA Input:  
Analog RGB: 0.707 Vrms.  
VGA Timing Modes  
MODEL  
TLM-1506  
TLM-1706  
TLM-1906  
RESOLUTION  
640 x 480  
60/75Hz  
60/75Hz  
60/75Hz  
N/A  
60/75Hz  
60/75Hz  
60/75Hz  
60/75Hz  
60/75Hz  
60/75Hz  
60/75Hz  
60/75Hz  
800 x 600  
1024 x 768  
1280 x 1024  
Audio Input:  
Signal Level: 1.0 Vrms  
Audio Output:  
Speaker 2W x 2  
Controls: Front panel push buttons  
CH : Select Video, S-Video(Y/C), VGA  
MENU : Enter On-Screen Display (OSD) menu  
: Decrease the volume  
: Increase the volume  
+
POWER : Power On/Off  
6
Indicators:  
LED: Power-on (Green), Power Off (Red)  
Connectors:  
Power inlet: AC power socket.  
Video : Two (2) BNC, one in, one loop thru out.  
S-Video (Y/C) : One (1) Mini-DIN, 4-pin, one in  
VGA : One (1) 15-pin D-sub  
Audio : Two (2) RCA, one in; one out  
Environmental:  
Temperature:  
Operating: 0oC to +40oC  
Storage: -20oC to +60oC  
Humidity:  
Operating: 10% to 85% (non-condensing)  
Storage: 10% to + 95% (non-condensing)  
7
4. Controls and Indicators  
Press this button to turn ON / OFF the monitor  
MENU  
1. Press this button to enter OSD menu  
2. Press this button to confirm and exit the selected parameter  
+
1. Press the buttons to adjust volume  
2. Under the main OSD menu, Press the buttons to move the cursor to  
desired selection in OSD menu  
3. Press the buttons to adjust the value of selected parameter in sub OSD  
menu  
CH  
Press this button to switch VIDEO, S-VIDEO and VGA channels  
8
5. OSD Menu  
5.1 Video Mode  
Main Menu  
VIDEO IN  
MAIN MENU  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
DISPLAY ADJUST  
COLOR TEMPERATURE  
LANGUAGE  
OSD ADJUST  
AUDIO CONTROL  
INPUT SELECT  
RESET  
EXIT  
VIDEO MODE : NTSC  
H.SYNC : 31.5KHz  
V.SYNC : 60.0Hz  
MODEL : TLM-1906  
Press <+> or <–> key to move cursor to desired selection and push <MENU> key  
to select it.  
To leave OSD, simply move cursor to Exit and hit <MENU> key.  
5.1.1 Brightness/ Contrast/ Color/ TINT/ Sharpness  
BRIGHTNESS  
72  
Press <+> or <–> key to adjust the value of Brightness (0~100), Contrast (0~100),  
Color (0~100), TINT (0~100) or Sharpness (0~3). After that, hit <MENU> key to  
confirm the selected parameter and return to main menu.  
9
5.1.2 Display Adjust  
VIDEO IN  
DISPLAY ADJUST  
PHASE  
100  
100  
50  
CLOCK  
H-POSITION  
V-POSITION  
H-SIZE  
50  
50  
50  
V-SIZE  
ASPECT RATIO  
AUTO ADJUST  
RESET  
EXIT  
MODEL : TLM-1906  
Press <+> or <–> key to move cursor to desired selection and push <MENU> key  
to select it.  
5.1.2.1 H-Position/ V-Position/ H-Size/ V-Size  
After move the curser to desired parameter and hit <MENU> key, the curser  
bar will turn into Light Blue, and then apply <+> or <–> key to adjust the value of  
H-Position (0~100), V-Position (0~100), H-Size (0~100) or V-Size (0~100). After  
that, hit <MENU> key to confirm the selected parameter and return to menu.  
Note: H-Position allows user to adjust horizontal position of the image.  
V-Position allows user to adjust vertical position of the image.  
H-Size allows user to adjust horizontal size of the image.  
V-Size allows user to adjust vertical size of the image.  
5.1.2.2 Aspect Ratio  
VIDEO IN  
ASPECT RATIO  
NORMAL  
UNDERSCAN  
OVERSCAN  
EXIT  
MODEL : TLM-1906  
Aspect Ratio allows user to change the scan type of the image.  
10  
5.1.2.3 Reset  
Reset allows user to recover the default setting of H-Position, V-Position, H-Size, and  
V-Size. But it won’t affect the Aspect Ratio.  
5.1.3 Color Temperature  
VIDEO IN  
COLOR TEMPERATURE  
9300K  
7500K  
6500K  
USER PRESET  
RESET  
EXIT  
MODEL : TLM-1906  
Color Temperature allows user change the color temperature of the monitor. Reset allows  
LCD monitor to return default setting.  
Note: User Preset allows user to adjust the color of the LCD panel.  
VIDEO IN  
USER PRESET  
GAINR  
GAING  
GAINB  
128  
128  
128  
128  
128  
128  
OFFSETR  
OFFSETG  
OFFSETB  
RESET  
EXIT  
MODEL : TLM-1906  
5.1.4 Language  
VIDEO IN  
LANGUAGE  
ENGLISH  
SPANISH  
EXIT  
MODEL : TLM-1906  
Language allows user to switch between English and Spanish.  
11  
5.1.5 OSD Adjust  
VIDEO IN  
OSD ADJUST  
H-POSITION  
V-POSITION  
TIME OUT  
TRANSPARENCY  
RESET  
50  
50  
30  
0
EXIT  
MODEL : TLM-1906  
5.1.5.1 H-Position/ V-Position/ Time Out/ Transparency  
After move the curser to desired parameter and hit <MENU> key, the curser  
bar will turn into Light Blue, and then press <+> or <–> key to adjust the value of  
H-Position (0~100), V-Position (0~100), Time Out (0~30) or Transparency (0~3).  
After that, hit <MENU> key to confirm the selected parameter and return to menu.  
Note: H-Position allows user to move OSD in horizontal direction.  
V-Position allows user to move OSD in vertical direction.  
Time Out allows user to adjust the period of time that OSD shows on the screen.  
Transparency allows user to see the image under the OSD.  
5.1.5.2 Reset  
Reset allows user to recover the default setting of OSD H-Position, OSD V-Position, Time  
Out and Transparency.  
5.1.6 Audio Control  
VIDEO IN  
AUDIO CONTROL  
MUTE  
VOLUME  
RESET  
EXIT  
OFF  
50  
MODEL : TLM-1906  
Audio Control allows user to adjust the sound of the monitor.  
5.1.6.1 Mute  
Mute allows user to turn on/off the sound.  
12  
5.1.6.2 Volume  
After move the curser to Volume and hit <MENU> key, the curser bar will turn  
into Light Blue, and then press <+> or <–> key to adjust the value of  
Volume (0~100). After that, hit <MENU> key to confirm the value of Volume and  
return to menu.  
5.1.6.3 Reset  
Reset allows user to recover the default setting of Mute and Volume.  
5.1.7 Input Select  
VIDEO IN  
INPUT SELECT  
VGA IN  
VIDEO IN  
S-VIDEO IN  
EXIT  
MODEL : TLM-1906  
Input Select allows user to switch the VGA, Video and S-Video Channel.  
5.1.8 Reset  
Reset allows user to recover all default setting of the monitor except for Aspect Ratio and  
Language.  
5.1.9 Exit  
Exit allows user to leave OSD menu.  
5.2 S-Video Mode  
The feature and function of the S-Video are same as Video. Please refer to 5.1 Video mode.  
13  
5.3 VGA Mode  
Main Menu  
VGA IN  
MAIN MENU  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
DISPLAY ADJUST  
COLOR TEMPERATURE  
LANGUAGE  
OSD ADJUST  
AUDIO CONTROL  
INPUT SELECT  
RESET  
EXIT  
RESOLUTION : 1280 x 1024  
H. SYNC : + 64.0 KHz  
V. SYNC : + 60.0 Hz  
MODEL : TLM-1906  
5.3.1 Brightness/ Contrast  
The function is same as Video mode. Please refer to 5.1.1.  
5.3.2 Display Adjust  
VGA IN  
DISPLAY ADJUST  
PHASE  
50  
50  
50  
50  
50  
50  
CLOCK  
H-POSITION  
V-POSITION  
H-SIZE  
V-SIZE  
ASPECT RATIO  
AUTO ADJUST  
RESET  
EXIT  
MODEL : TLM-1906  
5.3.2.1 Phase/ Clock/ H-Position/ V-Position  
After move the curser to desired selection and hit <MENU> key, the curser bar  
will turn into Light Blue, and then press <+> or <–> key to adjust the value of  
Phase (0~100), Clock (0~100), H-Position (0~100) or V-Position (0~100). After that,  
hit <MENU> key to confirm the selected parameter and return to menu.  
14  
Note: Phase allows user to adjust phase of the image.  
Clock allows user to adjust clock of the image.  
H-Position allows user to adjust horizontal position of the image.  
V-Position allows user to adjust vertical position of the image.  
5.3.2.2 Auto Adjust  
AUTO ADJUST  
Move the curser to AUTO ADJUST and hit the <MENU> key.  
Note: Auto Adjust allows user to adjust the image automatically.  
5.3.2.3 Reset  
Reset allows user to recover the default setting of Phase, Clock, V-Position and H-Position.  
5.3.3 Color Temperature  
The function is same as Video mode. Please refer to 5.1.3.  
5.3.4 Language  
The function is same as Video mode. Please refer to 5.1.4.  
5.3.5 OSD Adjust  
The function is same as Video mode. Please refer to 5.1.5.  
5.3.6 Audio Control  
The function is same as Video mode. Please refer to 5.1.6.  
5.3.7 Input Select  
The function is same as Video mode. Please refer to 5.1.7.  
5.3.8 Reset  
The function is same as Video mode. Please refer to 5.1.8.  
5.3.9 Exit  
The function is same as Video mode. Please refer to 5.1.9.  
15  
6. Regulatory Agency  
6.1 Safety Approvals  
This series design shall meet the standards of the following domestic and foreign  
agencies:  
UL listed: UL60950-2000 listing (Information Processing and Business Equipment)  
CUL Certified: CAN/CSA C22.2 No. 950-95 (Information Technology Equipment)  
CE LVD: IEC 60950: 1999 3rd edition  
CB: IEC 60950: 1999 3rd edition  
6.2 EMI/EMS Emission Approvals  
This series design shall meet following EMI/EMS specifications:  
FCC Compliance: FCC Rules and Regulations, Part 15, subpart B, Class B.  
CE COMPLIANCE: EN55022:1998 class B, EN55024:1998, EN50130-4:1998  
EN 61000-3-2:2000, EN 61000-3-3:1995.  
7. Mechanical  
7.1 Weight  
Model  
TLM1-1506  
TLM-1706  
TLM-1906  
Net weight  
Gross weight  
4.1 KG/ 9.0 lb  
5.8 KG/ 13.0 lb  
5.0 KG/ 11.0 lb  
6.8 KG/ 15.0 lb  
6.4 KG/ 14.5 lb  
8.6 KG/ 19.0 lb  
7.2 Dimensions:  
Model  
Physical dimension  
TLM-1506  
TLM-1706  
TLM-1906  
356(W) x 387(H) x 200(D)mm  
14.0(W) x 15.2(H) x 7.9(D)inch  
432(W) x 470(H) x 203(D)mm  
17.0(W) x 18.5(H) x 8.0(D)inch  
387(W) x 402(H) x 200(D)mm  
15.2(W) x 15.8(H) x 7.9(D)inch  
450(W) x 470(H) x 203(D)mm  
17.7(W) x 18.5(H) x 8.0(D)inch  
458(W) x 416(H) x 215(D)mm  
18.0(W) x 16.4(H) x 8.5(D)inch  
546(W) x 521 (H)x 220(D)mm  
21.5(W) x 20.5(H) x 8.7(D)inch  
Packing dimension  
7.3 Wall mount:  
Optional wall mount (VESA standard 100mmX100mm)  
8. Reliability  
Mean Time Between Failures (MTBF):  
MTBF shall be 50,000 hours minimum at 90% confidence level and 100% duty cycle  
continuous operation at 25oC. The calculation shall not include LCD panel.  
16  
9. Appendix  
REAR PANEL COMPONENTS AND CONTROL  
VIDEO :  
S-VHS :  
AUDIO :  
Video input / Looping output  
S-Video input  
Audio input / output  
VGA input  
VGA  
:
AC IN :  
AC power input  
17  
10. LCD Video Monitor Specification  
MODEL  
TLM-1506  
TLM-1706  
TLM-1906  
DESCRIPTION  
Panel type  
15” TFT color LCD  
15” (381mm) diagonal  
304.1x228.1mm  
0.297x0.297mm  
140o/125o  
17” TFT color LCD  
17” (432mm) diagonal  
337.9x270.3mm  
0.264x0.264mm  
160o/160o  
19” TFT color LCD  
19” (483mm) diagonal  
376.3 x301.0mm  
0.294 x 0.294mm  
160o/160o  
Screen size  
Viewable size  
Dot pitch  
Viewing angle (H/V)  
Contrast ratio  
Brightness  
500:1  
1000:1  
1000:1  
450 cd/m²  
300 cd/m²  
300 cd/m²  
Resolution  
1024x768  
1280 x1024  
16.7M  
1280 x1024  
16.7M  
Display color  
Response time  
Power input  
16.2M  
8ms  
5ms  
5ms  
AC 100-240 V  
32W  
Power consumption  
Dimension (Physical)  
WxHxD mm  
40W  
356x387x200mm (with base)  
387x402x200mm (with base)  
458x416x215mm (with base)  
356x300x67mm (without base) 387x338x67mm (without base) 458x373x77mm (without base)  
Weight (Physical)  
Wall mount  
4.1 Kg (with base)  
5.0 Kg (with base)  
6.4 Kg (with base)  
VESA standard 100mmX100mm  
Connector: 15-pin D-sub  
PC  
Input signal  
SVGA/XGA  
SVGA /XGA/ SXGA  
SVGA /XGA/ SXGA  
NTSC/PAL composite video, Connector: 2 BNC for Video I/O,  
1 mini-din 4pin for S-video Input Level: 1.0Vp-p / 75 ohm  
Video  
Input  
System : NTSC / PAL BGHI  
1 x Stereo Audio I/O (RCA x 2)  
Audio  
Speaker 2W x 2  
N/A  
DC output  
User’s control  
Remote control  
Rack Mount Kit (Optional)  
Regulation  
CH, MENU, , +, Power  
N/A  
TRK-1506  
TRK-1706  
TRK-1906  
UL, CUL, FCC-B, CE  
Specification subjects to change without notice.  
18  
TATUNG COMPANY OF AMERICA  
2850 El Presidio Street  
Long Beach, CA 90810  
(800) 827-2850  
19  

Weil McLain VHE Series 3 User Manual
Specialized AFR S120 User Manual
Sony Xplod WX 4500X User Manual
Sony Handycam DCR VX2100 User Manual
Sony DCR DVD803 User Manual
Sony CCD TR720E User Manual
Sony BLU RAY DISCTM BDP S480 User Manual
Sony 3 280 847 1100000000#User Manual
Samsung SyncMaster 400TSn User Manual
Samsung HMX U100UN User Manual