3-810-309-11 (2)
FM/AM
Cassette Car
Stereo
EN
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. XR-C400 Serial No.
For installation and connections, see the supplied installation/connections
manual.
XR-C400
1996 by Sony Corporation
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Table of contents
This Unit Only
With Optional Equipment
Getting Started
Resetting the unit ................................................ 4
Detaching the front panel .................................. 4
Setting the clock .................................................. 5
CD changer
Playing a CD ........................................................ 8
Scanning the tracks
— Intro scan .................................................... 9
Playing tracks repeatedly
— Repeat play ................................................ 9
Playing tracks in random order
— Shuffle play ................................................ 9
Labelling a CD
Cassette player
Listening to the tape ........................................... 5
Playing the tape in various modes ................... 6
— Disc memo ................................................. 9
Selecting the specific tracks for playback ...... 10
Radio
Memorizing stations automatically
— Best Tuning Memory (BTM) ................... 7
Memorizing only the desired stations ............. 7
Receiving the memorized stations.................... 7
Additional Information
Precautions ......................................................... 11
Maintenance ....................................................... 12
Dismounting the unit ....................................... 12
The rotary remote labels .................................. 12
Location of controls .......................................... 13
Specifications ..................................................... 14
Troubleshooting guide ..................................... 15
Index ................................................................... 17
Other Functions
Adjusting the sound characteristics ................. 8
Muting the sound................................................ 8
Changing the sound and display settings ....... 8
EN
3
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Attaching the front panel
Attach part A of the front panel to part B of
the unit as illustrated and push until it clicks.
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ball-point pen.
A
B
Notes
• Make sure that the front panel is the right way up when
attaching it to the unit as it cannot be attached upside
down.
• Do not press the front panel hard against the unit when
attaching it to the unit. It can easily be attached by
pressing it lightly against the unit.
• When you carry the front panel with you, put it in the
supplied front panel case.
Reset button
Note
Pressing the reset button will erase all the memorized
stations.
EN
• Do not press hard or give excessive pressure to the
display windows of the front panel.
• Do not expose the front panel to direct sunlight, heat
sources such as hot air ducts or leave it in a humid place.
Never leave it on the dashboard etc. of a car parked in
direct sunlight where there may be a considerable rise in
temperature inside the car.
Detaching the front panel
The front panel of this unit can be detached in
order to prevent the unit from being stolen.
Caution alarm
1 Press (OFF).
If you turn the ignition key to the OFF position
without removing the front panel, the caution
alarm will beep for a few seconds (only when
the POWER SELECT switch is set to the A
position).
2 Press (RELEASE) to open up the front
panel, and detach the panel by pulling it
towards you.
(RELEASE)
Notes
• Be sure not to drop the panel when detaching it from the
unit.
• If you press (RELEASE) to detach the panel while the
unit is still turned on, the power will be automatically
turned off in order to protect the speakers from being
damaged.
4
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Setting the clock
The clock has a 12-hour digital indication.
For example, setting it to 10:08
Cassette Player
1 Press (OFF) or (DSPL) during operation.
Listening to the tape
2 Press (DSPL) for two seconds.
Insert the cassette.
100
The hour digit blinks.
1 Set the hour digits.
to go forward
to go back
Playback will start automatically.
If the cassette is already inserted, press (TAPE)
to start playback.
1000
FWD
2 Press (SEL) momentarily.
EN
The side facing up is being played.
1000
The minute digit blinks.
REV
3 Set the minute digits.
to go forward
The side facing down is being played.
Tip
to go back
To change the tape transport direction, press (TAPE)
during tape playback.
1008
To
Press
(OFF)
6
Stop playback
Eject the cassette
3 Press (DSPL) momentarily.
Fast-winding the tape
1008
The clock activates.
During playback, press either side of
(PRESET/DISC).
PRESET
DISC
Note
FF
REW
If the POWER SELECT switch on the bottom of the unit is
set to the B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio.
Rewind
Fast-forward
To start playback during fast-forwarding or
rewinding, press (TAPE) .
5
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Locating the beginning of the
tracks — Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
Switching to the radio during fast-
winding the tape
— Automatic Tuner Activation (ATA)
Press (5) during playback.
“ATA” appears on the display.
During playback, press either side of
(SEEK/AMS) momentarily.
When fast-forwarding or rewinding with
(PRESET/DISC), the tuner will turn on
automatically.
SEEK
AMS
To locate the
previous tracks
To locate the
succeeding the tracks
Skipping blanks during tape
playback — Blank skip
Note
The AMS function may not work when :
• the blanks between tracks are shorter than 4 seconds
• there are noises
Press (6) during playback.
“BL.SKIP” appears on the display.
• there are long sections of low volume or quiet sections.
Blanks longer than eight seconds will be
Changing the displayed items
automatically skipped during tape playback.
Each time you press (DSPL) momentarily
during tape playback, the displayed item
changes as follows:
Playing a tape recorded in the
Dolby B NR system
z Tape playback
z Clock
z Frequency*
EN
Press the (3) when you want to listen to
a tape recorded in the Dolby* B NR
system.
* While the ATA function is activated.
“a” appears on the display.
* Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.
Playing the tape in
various modes
Searching the desired track
— Intro scan
Playing a CrO2 or metal tape
Press (1) during playback.
“INTRO” appears on the display.
Press (4) when you want to listen to a
CrO2 (TYPE II) or metal (TYPE IV) tape.
“MTL” appears on the display.
The first 10 seconds of all the tracks are played.
To cancel this function, press (4).
When you find the desired track, press again.
The unit returns to the normal playback mode.
Playing tracks repeatedly
— Repeat play
Press (2) during playback.
“REP” appears on the display.
When the currently played track is over, it will
be played again from the beginning.
To cancel this mode, press again.
6
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
2 Press (SEEK/AMS) to search for the
station which you wish to store on the
preset number button.
Radio
3 Press the desired preset number button
((1) to (6)) for two seconds until a beep
sounds.
Memorizing stations
The number of the pressed preset number
button appears on the display.
automatically
— Best Tuning Memory (BTM)
This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
Receiving the memorized
stations
PREVENTING ACCIDENTS!
1 Press (TUNER) repeatedly, and select the
When tuning in during driving, use the
automatic tuning and the memory preset
search function instead of the manual tuning.
band.
2 Press the preset number button ((1) to
(6)) momentarily on which the desired
station is stored.
1 Press (TUNER) repeatedly and select the
band.
EN
Each time you press (TUNER), the band
changes as follows:
FM1 n FM2 n FM3 n AM1 n AM2
Tip
Press either side of (PRESET/DISC) momentarily to
receive in order the stations stored in the memory (Preset
Search Function).
2 Press (BTM) for two seconds.
If FM stereo reception is poor
— Monaural mode
Notes
• The unit will not store stations with weak band
frequencies on the preset number buttons. If there are
only a few stations received, some preset number buttons
will remain empty.
• When there is a preset number indicated on the display,
the unit will store stations on all preset number buttons
from the one currently displayed.
Press (SENS) momentarily until “MONO”
lights up on the display.
The sound will improve, but it will become
monaural. (The “ST” indication will
disappear.)
Changing the displayed items
Each time you press (DSPL), the display item
changes as follows:
Frequency ˜ Clock
Memorizing only the
desired Stations
Up to 6 stations on each band (FM1, FM2,
FM3, AM1 and AM2) can be stored on the
preset number buttons in order of your choice.
Therefore, 18 stations can be memorized on
FM.
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
The scanning stops when a station is received.
Press either side of the button repeatedly until
the desired station is received.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
Note
If the automatic tuning stops too frequently, press
(SENS) momentarily until “LCL” lights up on the display
(local seek mode). Only the stations with relatively strong
signals can be tuned in.
1 Press (TUNER) repeatedly, and select the
band.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).
7
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
With the Optional Equipment
Other Functions
CD Changer
Playing a CD
Adjusting the sound
characteristics
Press (CD) and select the changer.
CD playback starts.
1 Select the item you want to adjust by
When a CD changer is connected, all the tracks
play from the beginning.
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
Each time you press (DSPL) momentarily
during CD playback, the displayed item
changes as follows:
2 Adjust the selected item by pressing
either (+) or (–).
Elapsed playback time ˜ Clock
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as volume control button.)
Locating a specific track
— Automatic Music Sensor (AMS)
EN
During playback, press either side of
(SEEK/AMS) the number of times you
wish to skip the tracks.
Muting the sound
SEEK
AMS
Press (MUTE).
The “MUTE” indication flashes.
To locate the
previous tracks
To locate the
succeeding tracks
To restore the previous volume level, press
again.
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired part.
Changing the sound and
display settings
SEEK
AMS
Enjoying bass and treble even at
Low Volume — Loudness
To reverse
To forward
Bass and treble will be reinforced.
Switching to other discs
Press (LOUD).
“LOUD” will appear on the display.
During playback, press either side of
(PRESET/DISC).
To cancel, press again.
PRESET
FF
REW
DISC
To return to the
previous disc
To advance to the
next disc
Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons once more.
8
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
To play the tracks in the current
changer in a random order
Scanning the tracks
— Intro scan
Press (3) repeatedly during CD playback
until “SHUF 2” is displayed.
The first 10 seconds of all the tracks on the
currently selected disc are played in order.
After the first disc is over, the next disc is
played.
To play all the tracks in a random
order
Press (3) repeatedly during CD playback
until “SHUF 3” is displayed.
Press (1) during playback.
“INTRO” appears on the display.
Each time you press (3) the display changes as
follows:
When you find the desired track, press again .
The unit returns to the normal CD playback
mode.
SHUF 2
(Changer shuffle)
SHUF 1
(Disc shuffle)
Cancel (Normal CD
playback mode)
SHUF 3
(All shuffle)
Playing tracks repeatedly
— Repeat play
If you press (1) during shuffle play, the first 10
seconds of all tracks will be played in random
order.
To repeat a track
EN
Press (2) repeatedly during CD playback
until “REP 1” is displayed.
To repeat a disc
Labelling a CD
Press (2) repeatedly during CD playback
until “REP 2” is displayed.
— Disc memo (CD changer with custom file
function)
To repeat all the discs in the
current changer
You can label each disc with a personalized
title. You can enter up to eight characters per
disc. If you label a CD, you can select the
specific tracks for playback (page 10).
Press (2) repeatedly during CD playback
until “REP 3” is displayed.
Each time you press (2) the display changes as
follows:
1 Play the CD and press (LIST) for two
seconds.
REP 2
(Disc repeat)
REP 1
(Track repeat)
CD1
2 Select the characters.
Cancel (Normal CD
playback mode)
REP 3 (Changer
repeat)
1 Press (+) to select the desired
characters.
(A n B n C n ... Z n 0 n 1 n 2 n
... n 9 n + n – n * n / n \ n >
n < n . n _ )
Playing tracks in random
order — Shuffle play
To play the tracks on the current
disc in a random order
CD1
If you press (–), the characters are
displayed in reverse order. If you want
to put a blank space after a character,
select “_” (under-bar).
Press (3) repeatedly during CD playback
until “SHUF 1” is displayed.
continue to next page n
9
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
Selecting the specific
tracks for playback — Bank
(CD changer with custom file function)
CD1
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
3 Repeat steps 1 and 2 to enter the
entire title.
1 Start playing the disc and press (LIST)
for two seconds. Then press (LIST)
momentarily.
3 To return to the normal CD playback
mode, press (LIST) for two seconds.
DISC
TRACK
CD1
To erase a title
You can erase a title by selecting eight “_”s
(under-bar).
Note
If you do not label the disc, you cannot use this
function. For more information on “Labelling a CD”,
refer to page 10.
Displaying the disc memo
Press (DSPL) during CD playback.
CD1
2 Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (SEL).
SCHUBERT
Each time you press (DSPL) during CD
playback, the displayed items changes as
follows:
EN
DISC
TRACK
CD1
The indication changes from “PLAY” to
“SKIP”. If you want to return to “PLAY”,
press (SEL) again.
z
Elapsed playback time
Clock
z
Disc title
Z
3 Repeat step 2 to set the “PLAY” to
“SKIP” mode on all the tracks.
Erasing the disc memo
1 Play the CD and press (LIST) for two
4 Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
seconds.
2 Press (5) while pressing (SEL).
Notes
• You can set the “SKIP” mode on up to 24 track.
• You cannot set the “SKIP” mode on all the tracks.
3 Press (+) or (–) to select the title that
you want to erase.
4 Press (SEL) for two seconds.
The title is erased.
Repeat step 3 and 4 if you want erase other
titles.
5 Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
10
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Playing the specific tracks only
Additional
Information
You can select:
•BANK ON to play the tracks with “PLAY”
setting.
•BANK INV to play the tracks with “SKIP”
setting.
Precautions
• If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before switching on.
• If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
1 During playback, press (4).
“BANK” appears on the display.
BANK
CD1
BANK ON
2 Press (4) to select the desired mode.
Each time you press (4) , the display
changes as follows:
• If no sound comes from the speakers of a
2-speaker system, set the fader control to the
center position.
z
BANK ON
z
BANK INV
BANK OFF
Z
Playback starts from the track following the
current one.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
To go back to the normal playing mode, select
“BANK OFF” in step 2.
EN
Notes on Cassettes
Cassette care
• Do not touch the tape surface of a cassette, as
any dirt or dust will contaminate the heads.
• Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
• Do not expose cassettes to direct sunlight,
extremely cold temperatures or moisture.
• When the tape is played back for a long
period, the cassette shell may become warm
because of the built-in power amplifier.
However, this is not a sign of a malfunction.
Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tapes used for these cassettes are
very thin and tend to be stretched easily.
Frequent playing and stopping of these tapes
may cause them to be pulled into the cassette
deck mechanism.
11
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Maintenance
Dismounting the unit
Fuse Replacement
When replacement the fuse, be sure to use one
with the correct amperage which is started on
the fuse case. Never use a fuse whose
amperage rating exceeds the one supplied to
the unit as this could cause a malfunction of
the unit.
1
Release key (supplied)
2
3
4
Warning
Use a fuse with the specified amperage.
Use of a fuse with higher amperage may cause
serious damage.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing (RELEASE),
then detach it and clean with a cotton swab
dipped in alcohol. Do not apply too much
force. Otherwise, the connector may get
damaged.
EN
The rotary commander
labels
Main unit
You can control this unit with the optional
rotary remote (RM-X2S).
Some labels are supplied with the rotary
remote. Attach that label which matches the
functions of the master unit and the mounting
position of the rotary remote.
Back of the front panel
When you mount the rotary remote, attach the
label in the illustration below.
LIST
MODE
SEL
SEL
MODE
LIST
12
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Location of controls
BTM
SEEK
AMS
INTRO
REP
ATA
1
2
5
3 SHUF
B
DSPL
a
PRESET
DISC
BL.
4 BANK
6
D
REW
FF
MTL
SKIP
LOUD
MUTE
SENS
LIST
TUNER
TAPE
SEL
CD
RELEASE
OFF
Refer to the pages for further details.
EN
1 LOUD (loudness) button 8
!¡ SEL (control mode select) button
5, 8, 10
2 During radio reception:
Preset number buttons 7
!™ Reset button (located on the front side
of the unit hidden by the front panel)
Press this button when you use this unit
for the first time, when you have changed
the car battery, or when the buttons of this
unit do not function properly.
During tape/CD playback:
(1) INTRO button 6, 9
(2) REPEAT button 6, 9
(3) SHUF/a (Dolby B NR) button 6, 9
(4) BANK/MTL button 6, 11
(5) ATA (Automatic Tuner
Activation) button 6
!£ (+)(–) (volume/bass/treble/balance/
fader control) button 5, 8, 9
(6) BL.SKIP button 6
!¢ Display window
3 BTM (Best tuning memory function)
!∞ TUNER (radio on/band select) button 7
button 7
!§ POWER SELECT switch (located on the
bottom of the unit)
4 DSPL (display mode change/time set)
button 5, 6, 7, 8, 10
See “POWER SELECT Switch” in the
installation/Connections manual.
5 6 (eject) button 5
6 SEEK/AMS button 6, 7, 8, 10
7 PRESET/DISC button 5, 6, 7, 8
8 SENS (sensitivity adjust) button 7, 9
9 MUTE button 8
!¶ CD (disc play/CD changer select) button
8
!• TAPE/* (playback/transport direction
change) button 5
!ª OFF button 4, 5
0 RELEASE (front panel release) button
@º LIST (custom file mode select • set)
4, 12
button 9, 10
13
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
8 watts per channel minimum continuous average power into
4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than
1% total harmonic distortion.
Other Specifications
Cassette player section
General
Outputs
Tape track
4-track 2-channel stereo
Line out (1)
Wow and flutter
Frequency response
Signal-to-noise ratio
0.08 % (WRMS)
30 – 18,000 Hz
Power antenna relay
control lead
Power amplifier control
lead
Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
12 V DC car battery
(negative ground)
Approx. 188 × 58 × 174.5
mm (7 1/2 × 2 3/8 × 6 7/8 in.)
(w/h/d)
Approx. 182 × 53 × 153.5
mm (7 1/4 × 2 1/8 × 6 1/8 in.)
(w/h/d)
Approx. 1.2 kg (2 lb. 10 oz.)
Parts for installation and
connections (1 set)
Front panel case (1)
Bus cable (supplied with
an RCA pin cord)
RC-61 (1 m), RC-62 (2 m)
RCA pin cord
Cassette type
TYPE II, IV
TYPE I
Dolby B NR
Dolby NR off
Tone controls
67 dB
64 dB
61 dB
58 dB
Power requirements
Dimensions
EN
Tuner section
FM
Mounting dimension
Tuning range
Antenna terminal
87.5 – 107.9 MHz
External antenna connector
Intermediate frequency 10.7 MHz
Mass
Supplied accessories
Usable sensitivity
Selectivity
Signal-to-noise ratio
8 dBf
75 dB at 400 kHz
65 dB (stereo),
68 dB (mono)
Optional accessories
Harmonic distortion at 1 kHz
0.5 % (stereo),
0.3 % (mono)
35 dB at 1 kHz
30 – 15,000 Hz
2 dB
Separation
Frequency response
Capture ratio
RC-63 (1 m), RC-64 (2 m),
RC-65 (5 m)
Rotary commander
RM-X2S
Source selector XA-U20
Optional equipment
AM
Tuning range
Antenna terminal
530 – 1,710 kHz
External antenna connector
Intermediate frequency 10.71 MHz/450 kHz
Sensitivity 30 µV
Design and specifications are subject to change without
notice.
Power amplifier section
Outputs
Speaker outputs
(sure seal connectors)
4 – 8 ohms
Speaker impedance
Maximum power output 30 W × 4 (at 4 ohms)
14
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Troubleshooting guide
The following check will assist in the correction of most problems which you may encounter with
your unit.
Before going through the check list below, refer to the operating procedures.
General
Problem
Cause/Solution
No sound
• Adjust the volume with (+).
• Set the fader control to the center position on the 2-speaker
system.
Indications do not appear on
the display window.
Remove the front panel and clean the connectors. See “Cleaning
the Connectors” of “Maintenance” for details.
Tape playback
Problem
Cause/Solution
Playback sound is distorted.
Contamination of the tape head. n Clean the head.
The AMS does not operate
correctly.
• There is a noise in the space between tracks.
• A blank space is too short (less than four seconds).
• + on (SEEK/AMS) is pressed immediately before the
following track.
EN
• = on (SEEK/AMS) is pressed immediately after the track
starts.
• A long pause, or a passage of low frequencies or very low
sound level is treated as a blank space.
Radio reception
Problem
Cause/Solution
Preset tuning is not possible.
• Memorize the correct frequency.
• The broadcast is too weak.
Automatic tuning is not possible. The broadcast is too weak. n Use the manual tuning.
The “ST” indication flashes.
• Tune in precisely.
• The broadcast is too weak. n Press (SENS) to enter the
MONO mode.
Disc play
Problem
Cause/Solution
Playback sound skips.
A dusty or defective disc.
15
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Error displays (with the optional CD changer(s) connected)
The following indications will flash for about five seconds and an alarm sound will be heard.
Display
Cause
Solution
A disc magazine is not inserted in the Insert a disc magazine with discs into
E-01
CD changer.
the CD changer.
No disc is inserted in the disc
magazine.
Take out the magazine and insert the
discs.
E-02
E-04
The disc is dirty.
Clean the disc.
The disc is inserted upside down.
Insert the disc correctly.
Press the reset button on the unit.
The CD changer cannot be operated
because of some problem.
E-99
TEMP
The ambient temperature is more than Wait until the temperature goes down
50°C. below 50°C.
If the above-mentioned solutions do not help to improve the situation, consult your nearest Sony
dealer.
EN
16
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Index
A
R
Automatic Music Sensor (AMS) 6, 8
Automatic tuning
Automatic Tuner Activation (ATA)
Radio
Repeat play 6, 9
Reset
Rewind
Rotary commander 12
7
7
6
4
5
B
Bass
8
S
Balance
8
Bank 10
Shuffle play
9
Best Tuning Memory (BTM)
7
Blank skip
6
T, U, V, W, X, Y, Z
Tape playback
Treble
5
C
8
Caution alarm
CD playback
Clock
4
8
5
D, E
EN
Disc memo 9, 10
Display 5, 6, 8, 10
Dolby
6
F, G, H
Fader
8
Fast-forward
Front panel
Fuse 12
5
4
I, J, K
Intro scan 6, 9
L
Local seek mode (LCL)
Loudness
7
8
M, N, O, P, Q
Manual search
Manual tuning
8
7
Metal tape
Mute
6
8
17
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
Sony Corporation Printed in Japan
Actual total number:
Sony XR-C400 (E) 3-810-309-11 (2)
|