4-170-534-11(1)
Table of contents
Getting started
Recording/Playback
camcorder
Saving images with an
external device
HDR-CX550/CX550V/
XR550/XR550V
Customizing your
camcorder
Additional information
Quick reference
Digital HD Video Camera Recorder
“Handycam”Handbook
2010 Sony Corporation
Do not aim at the sun. Doing so might cause
your camcorder to malfunction. Take images
of the sun only in low light conditions, such as
at dusk.
You may not be able to play back normally
images recorded on your camcorder with other
devices. Also, you may not be able to play back
images recorded on other devices with your
camcorder.
About language setting
The on-screen displays in each local language
are used for illustrating the operating
Discs recorded with HD image quality
(high definition)
procedures. Change the screen language before
using the camcorder if necessary (p. 17).
This camcorder captures high definition footage
in the AVCHD format. DVD media containing
AVCHD footage should not be used with DVD
based players or recorders, as the DVD player/
recorder may fail to eject the media and may
erase its contents without warning. DVD media
containing AVCHD footage may be played on
a compatible Blu-ray Discplayer/recorder or
other compatible device.
On recording
To ensure stable operation of the memory card,
it is recommended to initialize the memory
card with your camcorder before the first use
all the data stored on it and the data will be
irrecoverable. Save your important data on your
PC etc.
Save all your recorded image data
Before starting to record, test the recording
function to make sure the image and sound are
recorded without any problems.
Compensation for the contents of recordings
cannot be provided, even if recording or
playback is not possible due to a malfunction of
the camcorder, recording media, etc.
To prevent your image data from being lost,
save all your recorded images on external media
periodically. It is recommended that you save
the image data on a disc such as DVD-R, etc.
using your computer. Also, you can save your
image data using a VCR, or a DVD/HDD
recorder (p. 59).
TV color systems differ depending on the
country/region. To view your recordings on a
TV, you need a NTSC system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials may
be contrary to the copyright laws.
You cannot make a AVCHD disc from the
image data recorded with
(MENU)
[Show others] [ REC MODE] (under
[SHOOTING SET] category) set to [HD
FX]. Save them on a Blu-ray Disc or using an
external media (p. 57).
Notes on battery pack/AC Adaptor
Notes on playing back
Be sure to remove the battery pack or the AC
Adaptor after turning off the camcorder.
Disconnect the AC Adaptor from the
camcorder, holding both the camcorder and the
DC plug.
The camcorder is compatible with MPEG-4
AVC/H.264 High Profile for high definition
image quality (HD) recording. Therefore, you
cannot play back images recorded with high
definition image quality (HD) on the camcorder
with the following devices;
Other AVCHD format compatible devices
which are not compatible with High Profile
Devices which are not compatible with the
AVCHD format
Note on the camcorder/battery pack
temperature
When the temperature of the camcorder
or battery pack becomes extremely high or
extremely low, you may not be able to record
or play back on the camcorder, due to the
US
ꢀ
protection features of the camcorder being
activated in such situations. In this case, an
indicator appears on the LCD screen and the
viewfinder (p. 98).
CX550/CX550V) and the hard disk (HDR-
XR550/XR550V) of the camcorder and the
memory card are called “recording media.”
In this manual, the DVD disc recorded with
high definition image quality (HD) is called
AVCHD disc.
Design and specifications of your camcorder
and accessories are subject to change without
notice.
When the camcoder is connected to a
computer or accessories
Do not try to format the recording media of the
camcorder using a computer. If you do so, your
camcorder may not operate correctly.
When connecting the camcorder to another
device with communication cables, be sure to
insert the connector plug in the correct way.
Pushing the plug forcibly into the terminal
will damage the terminal and may result in a
malfunction of the camcorder.
Confirm the model name of your
camcorder
The model name is shown in this manual when
there is a difference in specification between
models. Confirm the model name on the
bottom of your camcorder.
The main differences in specification of this
series are as follows.
If you cannot record/play back images,
perform [MEDIA FORMAT]
Recording
media
Capacity
of internal
recording
media
USB
jack
If you repeat recording/deleting images for
a long time, fragmentation of data occurs on
the recording media. Images cannot be saved
or recorded. In such a case, save your images
on some type of external media first, and then
perform [MEDIA FORMAT] by touching
(MENU) [Show others]
[MEDIA FORMAT] (under [MANAGE
MEDIA] category) the desired medium
HDR-
Internal
memory +
memory
card
64 GB
Input/
output
CX550/
HDR-
CX550V*
HDR-
Internal
hard disk
+ memory
card
240 GB
XR550/
HDR-
XR550V*
[YES] [YES]
.
The model with * is equipped with GPS.
Notes on optional accessories
We recommend using genuine Sony accessories.
Genuine Sony accessories may not be available
in some countries/regions.
About this manual, illustrations and
on-screen displays
The example images used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may appear
different from images and screen indicators that
actually appear on your camcorder. And, the
illustrations of your camcorder and its screen
indication are exaggerated or simplified for
understandability.
In this manual, the internal memory (HDR-
US
4
Notes on use
Do not do any of the following. Otherwise, the
recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
ejecting the memory card when the access
removing the battery pack or AC Adaptor
from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
When using a shoulder belt (sold separately), do
not crash the camcorder against an object.
Do not use your camcorder in very loud areas
(HDR-XR550/XR550V).
On the drop sensor (HDR-XR550/
XR550V)
To protect the internal hard disk from shock
by dropping, the camcorder has a drop sensor
under a non-gravity condition, the block noise
made when this function is activated by the
camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/
playback may be stopped.
Note on using the camcorder at high
altitudes (HDR-XR550/XR550V)
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 5,000
meters (16,000 feet). Doing so may damage the
internal hard disk drive of your camcorder.
US
5
Operation flow
Getting started (p. 12)
Prepare the power source and memory card.
Recording movies and photos (p. 21)
Playing movies and photos
Saving images
Saving movies and photos with a computer
Deleting movies and photos (p. 44)
If you delete the image data that has been saved on your
computer or a disc, you can record new images on the free
media space again.
US
6
Advice for successful recording
To get good results in recording
Stabilizing your camcorder
When you hold the camcorder, keep your upper body upright,
and hold your arms close to your body.
The SteadyShot function is effective against camera-shake,
however, it is essential that you not move the camcorder.
Zooming smoothly
Zoom in and out slowly and smoothly. And, use zooming
sparingly. Excessive zooming will make movies that may make
the viewer feel tired when viewing them.
Evoking a feeling of spaciousness
Use the panning technique. Stabilize yourself, move your
camcorder horizontally as you turn your upper body slowly. Stay
still at the end of panning for a while to make the scene look
stable.
Accentuating movies with narration
Consider the sound to be recorded with your movies. Narrate
the subject, or talk to the subject during shooting.
Aim for a balanced volume of voices, since the recording person
is closer to the microphone than the recorded person.
Using accessories
Make good use of camcorder accessories.
For example, using a tripod, you can make a time-lapse
recording or record subjects in dim light, such as scenes of
fireworks, or night views. By always carrying spare batteries, you
can continue recording without worrying about battery power
shortages.
US
7
Useful recording techniques
Capturing images beautifully without
troublesome setting
Focusing on the child on the left side of
the screen
INTELLIGENT AUTO(26)
Prioritizing the subject(28)
SPOT FOCUS(73)
Capturing photos during movie
recording
Recording in a dimly-lit room
Dual Rec(30)
Smile Shutter (29)
NightShot(30)
LOW LUX(77)
Capturing fireworks, or a sunset in all
its splendor
Checking your golf swing
FIREWORKS(71)
SUNRISE&SUNSET(71)
GOLF SHOT(75)
SMTH SLW REC(75)
US
ꢁ
Table of contents
Read this first. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Notes on use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Advice for successful recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 1: Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 2: Turning the power on, and setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the language setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Step 3: Preparing the recording media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting the recording media for movies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting the recording media for photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Inserting a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Recording movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Shooting photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Useful functions for recording movies and photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Zooming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
or standard image quality (STD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Selecting the recording mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Prioritizing the subject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Capturing smiles automatically (Smile Shutter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Recording in dark places (NightShot). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Recording in mirror mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Playback on the camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Useful functions for playing movies and photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Searching for desired images by date (Date Index). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Searching for desired scene by pinpoint (Film Roll Index) . . . . . . . . . . . . . . . . . . . . . . . 36
Searching for desired scene by face (Face Index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Playing back a digest of your movies (Highlight Playback) . . . . . . . . . . . . . . . . . . . . . . 37
Using PB zoom with photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Playing back a series of photos (Slide show) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
US
9
Playing images on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connecting a TV using [TV CONNECT Guide]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using “BRAVIA”Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Deleting movies and photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Protecting recorded movies and photos (Protect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Dividing a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Capturing a photo from a movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
to memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Dubbing movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Copying photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using the Playlist of movies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Creating the Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Playing the Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Using the GPS function (HDR-CX550V/XR550V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting the GPS function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Acquiring the current location information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Displaying the coordinate information (COORDINATES) . . . . . . . . . . . . . . . . . . . . . . . . . 55
(AUTO CLOCK ADJ/AUTO AREA ADJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Saving images in external media (DIRECT COPY). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Creating a disc with a DVD writer, recorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Selecting the method for creating a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
other than DVDirect Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
with a recorder, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Operating menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Using MY MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
OPTION MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
1U0S
Menu lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
MANUAL SETTINGS (Items to adjust for scene condition) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
SHOOTING SET (Items for customized shooting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
PHOTO SETTINGS (Items for recording photos) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
PLAYBACK (Items for playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
EDIT (Items for editing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
OTHERS (Items for other settings). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
MANAGE MEDIA (Items for recording media) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
GENERAL SET (Other setup items) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Self-diagnosis display/Warning indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Recording time of movies/number of recordable photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Expected recording time of movies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Expected number of recordable photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Using your camcorder abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Maintenance and precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
About the AVCHD format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
About GPS (HDR-CX550V/XR550V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
About the “Memory Stick”media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
About the “InfoLITHIUM”battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
About x.v.Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
About handling of your camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Screen indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Parts and controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
US
11
Getting started
Step 1: Charging the battery pack
HDR-CX550/CX550V
Battery pack
/CHG (flash/charge)
lamp
DC IN jack
DC plug
Power cord (Mains lead)
AC
Adaptor
To the wall outlet (wall socket)
HDR-XR550/XR550V
Battery pack
/CHG (flash/charge)
lamp
DC IN jack
DC plug
AC
Power cord (Mains lead)
Adaptor
To the wall outlet (wall socket)
1U2S
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
Turn off your camcorder by closing the LCD screen after replacing the
viewfinder.
1
2
3
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)
lamp turns off when the battery pack is fully charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
4
Tips
When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack
NP-FV50(supplied)
NP-FV70
Charging time
155
195
390
NP-FV100
Times measured with the camcorder at 25 C (77 °F).
10 C to 30 C (50 °F to 86 °F) is recommended.
US
1ꢀ
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery
pack ().
To use a wall outlet (wall socket) as a power source
attached, the battery pack is not discharged.
Charging the battery pack abroad
You can charge the battery pack in any countries/regions using the AC Adaptor supplied with
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.
Notes
Do not use an electronic voltage transformer.
Notes on the battery pack
When you remove the battery pack or disconnect the AC Adaptor, replace the viewfinder, close the LCD
screen and make sure that the
off.
The /CHG (flash/charge) lamp flashes during charging under the following conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The temperature of the battery pack is low.
Remove the battery pack from your camcorder and put it in a warm place.
The temperature of the battery pack is high.
Remove the battery pack from your camcorder and put it in a cool place.
When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100
battery pack.
We do not recommend using an NP-FV30, which only allows short recording and playback times, with
your camcorder.
In the default setting, the power turns off automatically if you leave your camcorder without any
operation for about 5 minutes, to save battery power ([A.SHUT OFF], p. 89).
Notes on the AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
1U4S
Step 2: Turning the power on, and setting the
date and time
Open the LCD screen of your camcorder.
1
Your camcorder is turned on and the lens cover is opened.
To turn on your camcorder when the LCD screen is open, press POWER.
MODE lamp
POWER button
Select the desired geographical area with
/
, then touch [NEXT].
2
Touch the button on the
LCD screen
To set the date and time again, touch
(MENU) [Show others] [CLOCK/ LANG]
(under
/
[GENERAL SET] category) [CLOCK SET]. When an item is not on the screen, touch
until the item appears.
Set [DST SET] or [SUMMERTIME], date and time, then touch
.
3
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
US
15
Notes
The date and time does not appear during recording, but they are automatically recorded on the
recording media, and can be displayed during playback. To display the date and time, touch
(MENU) [Show others] [PLAYBACK SET] (under
CODE] [DATE/TIME]
You can turn off the operation beeps by touching
SET] (under [GENERAL SET] category) [BEEP] [OFF]
[PLAYBACK] category) [DATA
.
(MENU) [Show others] [SOUND/DISP
.
Once the clock is set, the clock time is automatically adjusted with [AUTO CLOCK ADJ] and [AUTO
depending on the country/region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and
[AUTO AREA ADJ] to [OFF] (HDR-CX550V/XR550V).
To turn off the power
Close the LCD screen. The (Movie) lamp flashes for a few seconds and the power is turned
off.
Tips
You can turn off your camcorder also by pressing POWER.
If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below.
On turning the camcorder on or off using the LCD screen or the viewfinder
The power of the camcorder is turned on or off depending on the status of the LCD screen or
the viewfinder.
Status
Viewfinder
Power of the
camcorder
LCD screen
Open
Retracted
Pulled out
Retracted
Pulled out
On
On
Off
On
Closed
Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When
you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original
position.
1U6S
Step 3: Preparing the recording media
The recording media that can be used differs depending on your camcorder. The following
icons are displayed on the screen of your camcorder.
HDR-CX550/CX550V
*
Internal
Memory
card
memory
HDR-XR550/XR550V
*
Internal hard
disk
Memory
card
* In the default setting, both movies and photos are recorded on this recording media. You can perform
recording, playback and editing operations on the selected medium.
Tips
Selecting the recording media for movies
Touch
(MENU) [Show others] [MEDIA SETTINGS] (under
[MANAGE MEDIA] category) [MOVIE MEDIA SET].
The [MOVIE MEDIA SET] screen appears.
Touch the desired recording media.
Touch [YES]
.
The recording medium is changed.
Selecting the recording media for photos
Touch
(MENU) [Show others] [MEDIA SETTINGS] (under
[MANAGE MEDIA] category) [PHOTO MEDIA SET].
The [PHOTO MEDIA SET] screen appears.
Touch the desired recording media.
1UꢁS
Touch [YES]
.
The recording medium is changed.
To check the recording media settings
In either movie recording mode or photo recording mode, the media icon of the selected
recording media is displayed at the top right corner of the screen.
Recording media icon
The icon displayed may vary depending on your model.
Inserting a memory card
Notes
Set the recording medium to [MEMORY CARD] to record movies and/or photos on a memory card.
Types of memory card you can use with your camcorder
Only “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, SD memory cards and
SDHC memory cards can be used with this camcorder. A MultiMediaCard cannot be used with this
camcorder.
In this manual, “Memory Stick PRO Duo” media and “Memory Stick PRO-HG Duo” media are called
“Memory Stick PRO Duo” media.
Memory cards of up to 32 GB have been verified to operate with your camcorder.
Types of “Memory Stick”media you can use with your camcorder
For recording movies, it is recommended that you use “Memory Stick PRO Duo” media of 1 GB or larger
marked with:
(“Memory Stick PRO Duo” media)*
(“Memory Stick PRO-HG Duo” media)
* Marked with Mark2 or not, either can be used.
“Memory Stick PRO Duo”media/“Memory Stick PRO-HG Duo”media
(This size can be used with your camcorder.)
“Memory Stick PRO Duo” media can be used only with “Memory Stick PRO” media compatible
equipment.
Do not attach a label or the like on “Memory Stick PRO Duo” media or “Memory Stick Duo” media
adaptor.
US
19
Open the cover, and insert the memory card with the nothched edge in the
direction as illustrated until it clicks.
Close the cover after inserting the memory card.
Note direction of notched corner.
Access lamp
The [Create a new Image Database File.] screen may appear if you insert a new memory
card. In that case, touch [YES]. If you record only photos on the memory card, touch
[NO].
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong
direction, the memory card, memory card slot, or image data may be damaged.
Notes
If [Failed to create a new Image Database File. It may be possible that there is not enough free space.]
is displayed, format the memory card by touching
(MENU) [Show others] [MEDIA
FORMAT] (under [MANAGE MEDIA] category) [MEMORY CARD] [YES] [YES]
.
To eject the memory card
Open the cover and lightly push the memory card in once.
Do not open the cover during recording.
When inserting or ejecting the memory card, be careful so that the memory card does not pop out and
drop.
2U0S
Recording/Playback
Recording
In the default setting, movies are recorded with high definition image quality (HD) on the
following media.
HDR-CX550/CX550V: Internal memory
HDR-XR550/XR550V: Internal hard disk
Tips
Fasten the grip belt.
1
Open the LCD screen of your camcorder.
2
Your camcorder is turned on and the lens cover is opened.
You can switch recording modes by pressing MODE. Press MODE to light up the desired recording
mode lamp.
MODE button
(Movie): When recording a movie
(Photo): When recording a photo
US
21
Recording movies
Press START/STOP to start recording.
You can start recording also by touching in the bottom left of LCD screen.
START/STOP
button
[STBY] [REC]
To stop recording, press START/STOP again.
You can stop recording also by touching in the bottom left of LCD screen.
The icons and indicators on the LCD panel will be displayed for about 3 seconds, then disappear after
turning on your camcorder or switching the recording (movie/photo)/playback modes. To display the
icons and indicators again, touch anywhere on the screen except the rec & zoom buttons on the LCD.
Rec & zoom buttons on LCD
about 3sec
after
Notes
If you close the LCD screen while recording movies, the camcorder stops recording.
The maximum continuous recordable time of movies is about 13 hours.
When a movie file exceeds 2 GB, the next movie file is created automatically.
It will take several seconds until you can start recording after you turn on the camcorder. You cannot
operate your camcorder during this time.
2U2S
The following states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
The media icon in the upper right of the LCD screen is flashing
Tips
When a face is detected, a white frame appears and the image quality around the face is optimized
automatically ([FACE DETECTION], p. 77).
In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person
during movie recording (Smile Shutter, p. 29).
You can check the recordable time, estimated remaining capacity, etc., by touching
(MENU)
[Show others] [MEDIA INFO] (under
[MANAGE MEDIA] category).
The LCD screen of your camcorder can display recording images across the entire screen (full pixel
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and
then adjust the angle ().
90 degrees (max.)
90 degrees to the
180 degrees (max.)
camcorder
When you make recording with the viewfinder only, pull out the viewfinder and close the LCD panel.
If the indicator on the viewfinder appear blurred, adjust the viewfinder lever located on the side of the
viewfinder.
[ STEADYSHOT] is set to [ACTIVE] in the default setting.
US
2ꢀ
Data code during recording
The recording date, time and condition , and coordinates (HDR-CX550V/XR550V) are
recorded automatically on the recording media. They are not displayed during recording.
However, you can check them as [DATA CODE] during playback. To display them, touch
(MENU) [Show others] [PLAYBACK SET] (under
[PLAYBACK] category)
.
[DATA CODE] a desired setting
Shooting photos
In the default setting, photos are recorded on the following recording media.
HDR-CX550/CX550V: Internal memory
HDR-XR550/XR550V: Internal hard disk
Tips
Press MODE to turn on the (Photo) lamp.
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.
Press PHOTO lightly to adjust the focus, then press it fully.
You can record photos also by touching
on the LCD screen.
Flashes Lights up
When
disappears, the photo is recorded.
2U4S
Tips
To change the image size, touch
[PHOTO SETTINGS] category) a desired setting
(MENU) [Show others] [ IMAGE SIZE] (under
.
You cannot record photos while
Your camcorder flashes automatically when there is insufficient ambient light. The flash does not work
in the movie recording mode. You can change how your camcorder flashes by (MENU) [Show
others] [FLASH MODE] (under [PHOTO SETTINGS] category) a desired setting
is displayed.
.
If you record photos using a flash with a conversion lens (sold separately), the shadow may be reflected.
If white circular spots appear on photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camcorder’s flash, they appear as white circular spots.
To reduce the white circular spots, light the room and shoot the subject without a flash.
Subject
Particles (dust,
pollen, etc.) in
the air
US
25
Useful functions for
recording movies and
photos
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 31 1/2 in.) for
telephoto.
You can magnify images up to 10 times using
optical zooming, unless [ STEADYSHOT] is
set to [ACTIVE].
Zooming
You can magnify images up to 14 times the
original size with the power zoom lever.
You can magnify images also with the
on the LCD screen.
/
Tips
want to zoom to a greater level.
Recording better images
automatically (INTELLIGENT AUTO)
By pressing
, you can record images
using the INTELLIGENT AUTO function.
When you turn the camcorder toward
the subject, the camcorder records using
the optimum combination of the three
detection modes: Face detection, Scene
detection and Camera-shake detection.
When the camcorder detects the subject,
the icons that correspond to the detected
condition are displayed.
*
**
Tips
In the default setting, INTELLIGENT AUTO
is set to ON.
Wider range of view
(Wide angle)
Close view
(Telephoto)
*
HDR-CX550/CX550V
** HDR-XR550/XR550V
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
Face detection
Notes
(Portrait), (Baby)
Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the power
zoom lever may also be recorded.
The camcorder detects faces, and adjusts
the focus, color, and exposure.
You cannot change the zoom speed with the
/
button on the LCD screen.
2U6S
[TELE MACRO]
Scene detection
[ STEADYSHOT]
[ STEADYSHOT]
[AUTO BACK LIGHT]
[LOW LUX]
[FACE DETECTION]
[SMILE PRIORITY]
(Backlight),
(Twilight), (Spotlight), (Low light),
(Macro)
The camcorder selects the most effective
setting automatically, depending on the
scene.
(Landscape),
Camera-shake detection
(Walk), (Tripod)
The camcorder detects whether camera-
shake occurs or not, and makes the
optimum compensation.
Notes
Above settings are reset to the default settings
when INTELLIGENT AUTO is set to ON.
Selecting high definition image
quality (HD) or standard image
quality (STD)
Notes
The camcorder may not detect the expected
scene or subject, depending on the recording
conditions.
You cannot use the flash depending on the
scenes detected.
You can select the desired image quality
from the high definition image quality
(HD) that enables you to record fine
images, or the standard definition image
quality (STD) that has more compatibility
with various playback devices. Change the
image quality according to the recording
situation or the playback device.
To cancel INTELLIGENT AUTO
Press
.
or the detection mode icons disappear,
and you can record with the preferred
settings.
Also, the INTELLIGENT AUTO setting
is canceled if you change the following
settings:
Touch
others] [
(MENU) [Show
SET] (under
/
[SHOOTING SET] category).
NightShot
[IRIS]
[SHUTTER SPEED]
[AE SHIFT]
[WB SHIFT]
Touch [
HD QUALITY] to
record high definition image
quality (HD) images, or touch
[GOLF SHOT]
[
STD QUALITY] to record
[SMTH SLW REC]
[SCENE SELECTION]
[WHITE BAL.]
standard definition image quality
(STD) images.
[SPOT MTR/FCS]
[SPOT METER]
[SPOT FOCUS]
Touch [YES]
.
Recording image quality is changed.
[EXPOSURE]
[FOCUS]
US
27
Tips
Tips
You can record, play, or edit movies in the
selected image quality only. To record, play, or
edit movies in another image quality, change
this setting.
Movies are recorded with AVCHD 1920
1080/60i format when the FX or FH mode
of the high definition image quality (HD) is
selected. And when the HQ or LP mode of the
high definition image quality (HD) is selected,
movies are recorded with AVCHD 1440
1080/60i format. Movies are recorded with
MPEG-2 format when the standard image
quality (STD) is selected.
You can select the following high definition
image quality (HD) recording mode. “24M”
of [HD FX] is the maximum bit-rate, and the
value other than of [HD FX], such as “17M,” is
an average bit-rate.
Selecting the recording mode
You can select a recording mode to record
the high definition image quality (HD)
movies from 4 levels. The recording time
of the media is changed depending on
recording mode.
[HD FX] (AVC HD 24M (FX))
[HD FH] (AVC HD 17M (FH))
[HD HQ] (AVC HD 9M (HQ)) (the default
setting)
Long time recording
High quality
recording
[HD LP] (AVC HD 5M (LP))
The recording mode of the standard image
quality (STD) is limited to the following value.
“9M” is an average bit-rate.
[STD HQ] (STD 9M (HQ))
“M,” such as in “24M,” means “Mbps.”
Touch
(MENU) [Show
others] [ REC MODE] (under
[SHOOTING SET] category).
Prioritizing the subject
Touch a desired setting.
If you want to record high quality
images with the high definition image
quality (HD), select the FX or FH
mode. If you want to record longer
movies, select the LP mode.
to [ON] (the default setting), and several
faces are detected, touch the face you want
to record as priority. Focus/color/exposure
are adjusted automatically for the selected
face. Since the face you touched has priority
also with the Smile Shutter function, your
camcorder records a photo automatically
when it detects the smiling face.
Touch
.
Notes
You cannot create an AVCHD disc from a
movie recorded with [HD FX] mode of
[
REC MODE]. Save a movie recorded with
[HD FX] mode onto Blu-ray discs or external
storage devices (p. 57).
2UꢁS
Touch the face you want to record as
priority.
Notes
Smiles may not be detected depending on
recording conditions, subject conditions, and
the setting of your camcorder.
When [ REC MODE] is set to [HD FX], you
cannot use the Smile Shutter function.
Tips
You can select the subject that has priority
for face detection and smile detection with
specify the priority subject by touching the
detection frame on the LCD screen, the face
with a double-lined frame has priority.
If a smile is not detected, set the [SMILE
SENSITIVITY] (p. 78).
The double-lined frame is displayed.
Touch the face with the double-lined frame
again to cancel.
Notes
The face you touched may not be detected,
depending on the surrounding brightness or
hairstyle of the subject. In this case, touch the
face again when you record.
Recording sound with more
presence (5.1ch surround
recording)
Tips
The double-lined frame around a face targeted
for possible smile detection shot turns orange.
If the face you touched disappears from the
LCD screen, the subject selected in [PRIORITY
touched returns to the screen, the face has
priority.
You can record Dolby Digital 5.1ch
surround sound with the built-in
microphone. Realistic sound can be enjoyed
when playing a movie on devices that
support 5.1ch surround sound.
Capturing smiles automatically
(Smile Shutter)
Built-in microphone
In the default setting, a photo is recorded
automatically when the camcorder detects
the smile of a person during movie
recording. An orange frame appears around
a face targeted for possible smile detection
shot.
Notes
If you play back 5.1ch sound on your
camcorder, 5.1ch sound is automatically
converted and output in 2ch.
US
29
To enjoy the 5.1ch surround sound of the
movies recorded with high definition image
quality (HD) in 5.1ch sound, you need an
AVCHD format device compatible with 5.1ch
surround.
When you connect your camcorder with an
HDMI cable (sold separately), the sound of high
definition image quality (HD) movies recorded
in 5.1ch sound is automatically output in 5.1ch
sound. The sound of standard definition image
quality (STD) movies is converted to 2ch.
Recording in dark places
(NightShot)
When you press NIGHTSHOT, appears,
and you can record images even in total
darkness.
Tips
You can select the recording sound from [5.1ch
SURROUND] (
) or [2ch STEREO]
(
) ([AUDIO MODE], p. 79).
You can create a disc, which contains the
movies recorded on your camcorder, on a
computer using the supplied software “PMB.” If
you play the disc on a 5.1ch surround system,
you can enjoy realistic sound.
Infrared port
Press NIGHTSHOT again to cancel the
NightShot function.
Notes
Recording high quality photos
The NightShot function uses infrared light.
Therefore, do not cover the infrared port with
your fingers or other objects.
Remove the conversion lens (sold separately).
when it is hard to focus automatically.
Do not use the NightShot function in bright
places. This may cause a malfunction.
with color images in dim light.
during movie recording (Dual Rec)
You can record photos during movie
recording by pressing PHOTO.
Notes
You cannot use the flash during Dual Rec.
may appear when the capacity of the
recording media is not enough or when you
record photos continuously. You cannot record
photos while
is displayed.
When [ REC MODE] is set to [HD FX], you
cannot use Dual Rec.
Tips
When the MODE lamp is set to
(Movie), the
size of photos becomes [
or [6.2M] (4:3).
8.3M] (16:9 wide)
You can record photos during recording
standby in the same way as when the (Photo)
lamp is turned on.
ꢀU0S
Recording in mirror mode
Press MANUAL to activate the
manual adjustment mode.
Pressing MANUAL switches the
setting mode between automatic and
manual.
Rotate the MANUAL dial to adjust
the focus.
Open the LCD panel 90 degrees to the
camcorder (), then rotate it 180 degrees
to the lens side ().
Items you can assign to the MANUAL
dial
Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
[IRIS] ... Shoots images with the IRIS priority
mode. If you adjust the IRIS, you can sharpen
the subject with its background blurred or
sharpen the whole image.
Controlling the image settings
manually with the MANUAL dial
[SHUTTER SPEED] ... Shoots images with
the SHUTTER SPEED priority mode. When
you shoot a moving subject at a higher shutter
speed, it appears as if frozen on the image. At
a lower shutter speed, the subject appears as if
it flowing.
You can assign 1 menu item you use often
to the MANUAL dial.
Since the focus adjustment is assigned to
the MANUAL dial in the default settings,
the operation below is described as
adjusting the focus using the dial.
MANUAL button
To assign the menu item to the
MANUAL dial
Press and hold MANUAL down for a
few seconds.
MANUAL dial
Rotate the MANUAL dial and select the
item to be assigned.
Press MANUAL.
US
ꢀ1
Notes
Manual settings will be retained even if you
change the assigned item of the MANUAL dial.
However, if you set [EXPOSURE] after setting
[AE SHIFT] manually, [EXPOSURE] will
override [AE SHIFT].
If you set either one of [EXPOSURE], [IRIS],
or [SHUTTER SPEED], the settings of other 2
items are canceled.
If you select [RESET] in step , all the items
adjusted manually are reset to the default
settings.
Tips
You can also assign menu items to the
MANUAL dial by touching
(MENU)
[Show others] [OTHER REC SET] (under
[SHOOTING SET] category) [DIAL
SETTING].
Even if you open the IRIS wider (a smaller
F-stop) than F3.4 when you set the zoom lever
to the W (Wide angle) side, the IRIS is reset
to F3.4 as you move the zoom lever to the T
(Telephoto) side.
If you adjust the IRIS, the in-focus range in
front of and behind the focused subject is
changed. When you open the IRIS wider (a
smaller F-stop), the in-focus range becomes
narrower, and when you close the IRIS
narrower (a larger F-stop), the in-focus range
becomes wider. You can set the IRIS to a
preferred value depending on the shooting
scenes.
When you record images under a fluorescent
lamp, sodium lamp, or mercury lamp,
horizontal stripes may appear, flicker may
occur, or color may change. In this case, change
the shutter speed according to the power supply
frequency in your region.
ꢀU2S
Playback
on the camcorder
In the default setting, movies and photos that are recorded on the following recording media
are played.
HDR-CX550/CX550V: Internal memory
HDR-XR550/XR550V: Internal hard disk
Tips
Open the LCD screen of your camcorder.
1
Your camcorder is turned on and the lens cover is opened.
Press
(VIEW IMAGES).
2
The VISUAL INDEX screen appears after some seconds.
You can display the VISUAL INDEX screen also by touching
screen.
(VIEW IMAGES) on the LCD
Touch
or
() a desired movie () to playback a movie.
3
Touch the (Photo) () a desired photo () to view a photo.
Movies are displayed and sorted by recording date.
Switches operating button display.
To MENU screen
Displays the screen to select the index type ([DATE INDEX]/[ MAP] (HDR-
US
ꢀꢀ
/
/
: Displays movies recorded on the previous/next date.*
: Displays the previous/next movie.
Returns to the recording screen.
* is displayed when is touched.
appears when the standard definition image quality (STD) movie is selected with [
SET] (p. 27).
/
You can scroll the display by touching and dragging or .
appears with the movie or photo that was most recently played or recorded. If you touch the
movie or photo with , you can continue playback from the previous time. (appears on the
photo recorded on the memory card.)
Playing movies
Your camcorder starts playing the selected movie.
Volume adjustment
Previous
Next
OPTION
To stop
To fast-forward
To pause/play
To fast-reverse
Notes
You may not be able to play back the images with other devices than camcorder.
Tips
When playback from the selected movie reaches the last movie, the screen returns to the INDEX screen.
Touch during pause to play back movies slowly.
As you repeat touching during playback, movies are played as fast as about 5 times
/
/
about 10 times about 30 times about 60 times.
You can also display the VISUAL INDEX by touching
(MENU) [Show others] [VISUAL
INDEX] (under
[PLAYBACK] category).
The recording date, time, and shooting conditions , and coordinates (HDR-CX550V/XR550V) are
recorded automatically during recording. This information is not displayed during recording, but you can
display it during playback by touching
(MENU) [Show others] [PLAYBACK SET] (under
[PLAYBACK] category) [DATA CODE] a desired setting
.
In the default setting, a protected demonstration movie is pre-recorded.
ꢀU4S
To adjust the sound volume of movies
While playing back movies, touch
adjust with
/
.
You can also adjust the sound volume by using
/
in the OPTION MENU.
Viewing photos
Your camcorder displays the selected photo.
To start/stop slide
show
Previous
Next
OPTION MENU
To the VISUAL INDEX
screen
Tips
When viewing photos recorded on the memory card,
(playback folder) appears on the screen.
US
ꢀ5
Useful functions for
playing movies and
photos
Tips
You can also display Date Index by touching
(MENU) [Show others] [VIEW
IMAGES] (under
[DATE INDEX].
On the Film Roll Index/Face Index screen, you
can display the Date Index by touching the date
in the upper right corner of the screen.
[PLAYBACK] category)
Searching for desired images by
date (Date Index)
You can search for desired images by date
efficiently.
Notes
Searching for desired scene by
pinpoint (Film Roll Index)
You cannot use the Date Index function for
photos on the memory card.
Movies can be divided by a set time and the
first scene of each division is displayed on
the INDEX screen. You can start playing
back a movie from the selected thumbnail.
Press
(VIEW IMAGES).
The VISUAL INDEX screen appears.
Touch
[DATE INDEX].
Press
(VIEW IMAGES).
Returns to the VISUAL INDEX screen
The VISUAL INDEX screen appears.
Touch
[ FILM ROLL].
Returns to the VISUAL INDEX screen
Touch
/
to select the date
of the desired image, then touch
.
Sets the interval at which to create
thumbnails of scenes in a movie.
Touch
desired movie.
/
to select the
The images of the selected date are
displayed on the VISUAL INDEX
screen.
Touch
/
to search for the
desired scene, then touch the
scene you want to play back.
Playback starts from the selected
scene.
ꢀU6S
Tips
Notes
You can also display the Film Roll Index by
Faces may not be detected depending on
recording conditions.
Example: People wearing glasses or hats, or who
do not face towards the camera.
touching
[VIEW IMAGES] (under
(MENU) [Show others]
[PLAYBACK]
category) [ FILM ROLL].
Make sure that you set [FACE DETECTION]
recording, to search movies on the Face Index.
Searching for desired scene by face
(Face Index)
Tips
The face images detected or touched during
movie recording are displayed on the
INDEX screen.
You can play back the movie from the
selected face image.
You can also display the Face Index by touching
(MENU) [Show others] [VIEW
IMAGES] (under
[PLAYBACK] category)
[ FACE].
Playing back a digest of your
movies (Highlight Playback)
Press
(VIEW IMAGES).
Your camcorder selects Highlight Playback
scenes at random, puts them together, and
plays them back as a digest of your high
definition image quality (HD) movies
with music and visual effects. Scenes
for Highlight Playback differ each time
Highlight Playback is selected. You can save
the desired Highlight Playback scenario.
The VISUAL INDEX screen appears.
Touch
[ FACE].
Returns to the VISUAL INDEX screen
Touch
(MENU) [Show
others] [ HIGHLIGHT] (under
[PLAYBACK] category).
Touch
desired movie.
/
to select the
The settings for Highlight Playback appear.
The Highlight Playback starts after several
seconds.
Touch
/
to search for the
Returns to the VISUAL INDEX screen
desired face image, then touch
the desired face image to view
the scene.
Playback starts from the beginning of
the scene with the selected face image.
US
ꢀ7
If you change the settings for Highlight
Playback, Highlight Playback scenes are
re-selected.
If you change [MUSIC] after you select
[THEME], the music will be selected
automatically for the theme from next time.
To stop Highlight Playback
To pause, touch
To stop, touch
.
or
.
To change the settings for Highlight
Playback
After touching [ HIGHLIGHT], touch
[HIGHLIGHT SET] before the Highlight
To save a scenario for Highlight
Playback
Playback starts. You can set following items.
Touch
(OPTION) [ SCENARIO
[PLAYBACK RANGE]
SAVE] [YES] during Highlight
Playback.
Set the range of movies to be played by selecting
the from and to date, then touch
.
If no range is set, your camcorder plays the
movies starting from those of the date displayed
on the VISUAL INDEX screen until the most
recently recorded movie.
[THEME]
Select one of the following: [SIMPLE],
[NOSTALGIC], [STYLISH], [ACTIVE] (the
default setting)
The music category is selected automatically
according to the theme.
You can save a maximum of 8 scenarios.
If 8 scenarios have already been saved,
[HIGHLIGHT SCENARIO full. HIGHLIGHT
SCENARIOS may be erased when the
SCENARIO ERASE button is pressed.]
appears on the LCD screen. Touch
[MUSIC]
From the music category, you can add one or
more of the following: [MUSIC1] - [MUSIC4]
(the default setting), [MUSIC5] - [MUSIC8]
(the desired music*).
[
SCENARIO ERASE] to delete unwanted
scenarios.
To play back a saved Highlight Playback
scenario
[AUDIO MIX]
The original sound is played back with the
music.
Touch
(MENU) [Show others]
[
SCENARIO] (under
[PLAYBACK]
Touch
/
to adjust the balance between
category) and select a scenario you want to
the original sound and the music.
[SHUFFLE]
play back with
/
and touch
.
To play back movies in random order, select
[ON].
Notes
If movies included in the Highlight Playback
scenario you are going to play are deleted or
divided, the scenario is played back with those
movies skipped.
Notes
The [PLAYBACK RANGE] setting is cleared
when the Highlight Playback stops.
To erase the saved Highlight Playback
scenario
Tips
You can change the settings for Highlight
Playback during Highlight Playback by
touching
Touch
(MENU) [Show others]
(OPTION).
[
SCENARIO ERASE] (under
[EDIT]
ꢀUꢁS
category) [ERASE] and select a scenario
Using PB zoom with photos
you want to erase with
/
, then touch
You can magnify photos from about 1.1 to 5
times the original size.
[YES]
To erase all scenarios, touch
.
(MENU)
[Show others] [ SCENARIO ERASE]
(under [EDIT] category) [ERASE ALL]
Magnification can be adjusted with the
power zoom lever.
[YES] [YES]
.
HDR-CX550/
HDR-XR550/
XR550V
You can erase also by touching
(OPTION) during Highlight Scenario Playback
or on the scenario selection screen.
CX550V
To change music files
You can transfer music files from audio CDs
or MP3 files to your camcorder, and play them
with Highlight Playback. To transfer music files,
you need to install the supplied software “PMB”
on your computer. Turn on your camcorder and
computer, connect them with the supplied USB
cable, then touch [DOWNLOAD MUSIC] on
the camcorder screen. (If the [USB SELECT]
screen does not appear, touch
(MENU)
[Show others] [MUSIC TOOL] (under
[OTHERS] category) [DOWNLOAD
MUSIC]).
After the music file is transferred to the
camcorder, if you cannot play the music,
the music file may be damaged. Delete the
Play back the photo you want to
magnify.
music file by touching
(MENU)
Magnify the photo with T
(Telephoto).
[Show others] [MUSIC TOOL] (under
[OTHERS] category) [EMPTY MUSIC],
then transfer the music file again. If you delete
music files using [EMPTY MUSIC], the music
data recorded on your camcorder at the factory
will be deleted too. In this case, you can restore
them using Music Transfer, a software installed
together with “PMB.” To start Music Transfer,
click [Start] [All Programs] [PMB]
[PMB Launcher] [Export] [Music
Transfer]. For operating instructions, see
[Music Transfer] help.
The screen is framed.
Touch the screen at the point you
want to display in the center of
the displayed frame.
The point where you touched on the
screen is moved to the center of the
display frame.
US
ꢀ9
Adjust the magnification with W
(Wide angle)/T (Telephoto).
To cancel, touch
.
Playing back a series of photos
(Slide show)
Touch
on the photo playback
screen.
The slide show begins from the selected
photo.
To stop the slide show
Touch
.
To restart the slide show
Touch
again.
Notes
You cannot operate playback zoom during slide
show.
Tips
You can set continuous slide show playback
by selecting
(OPTION)
tab
[SLIDE SHOW SET] while playing photos. The
default setting is [ON] (continuous playback).
4U0S
Playing images on a TV
If you touch [HINT], you can see tips for
the connection or change the settings of
your camcorder.
Connection methods and the image
quality (high definition (HD) or standard
definition (STD)) viewed on the TV screen
differ depending on what type of TV is
connected, and the connectors used.
Connecting a TV using [TV
CONNECT Guide]
Input connectors
on the TV
Connectors on your
camcorder
You can connect your camcorder to the TV
easily following the instructions displayed
on the LCD screen, [TV CONNECT
Guide].
Connect your camcorder to the
TV.
HDMI OUT jack
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the TV.
Turn on your camcorder, and
touch
(MENU) [Show
others] [TV CONNECT Guide]
(under [OTHERS] category) on
the LCD screen.
Use the supplied AC Adaptor as the power
source (p. 14).
A/V Remote
Connector
Touch [High Definition TV].
Touch
[YES].
When the A/V connecting cable is used
to output movies, movies are output with
standard definition image quality (STD).
Touch
/
to select the input
Play back movies and photos on
your camcorder (p. 33).
jack of your TV, then touch
.
The connection medhod is displayed.
US
41
Types of connection cables between
your camcorder and TV
Connecting to a high definition TV
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE (VIDEO
1, VIDEO 2, etc.).
Component A/V Cable (supplied)
To set the aspect ratio according to the
connected TV (16:9/4:3)
Set [TV TYPE] to [16:9] or [4:3] according to
(Green) Y
(Blue)PB/CB
(Red)PR/CR
your TV (p. 87).
(White)
(Red)
When your TV is monaural (When your
TV has only one audio input jack)
HDMI Cable (sold separately)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white (left channel) or red (right channel) plug
to the audio input jack of your TV or VCR.
When you connect with component
A/V cable
If you connect only component video plugs,
audio signals are not output. Connect the white
and red plugs to output audio signals.
Connecting to a non-high-definition 16:9 (wide) or 4:ꢀ
TV
Component A/V Cable (supplied)
When you connect with HDMI cable
(Green) Y
(Blue)PB/CB
(Red)PR/CR
Use an HDMI cable with the HDMI logo.
Use an HDMI mini connector on one end
(for the camcorder), and a plug suitable for
connecting your TV on the other end.
Copyright-protected images are not output
from the HDMI OUT jack of your camcorder.
Some TVs may not function correctly (e.g., no
sound or image) with this connection.
Do not connect the camcorder HDMI OUT
jack to an external device HDMI OUT jack, as
malfunction may result.
(White)
(Red)
A/V connecting cable with S VIDEO (sold
separately)
(White)
(Red)
When the connected device is compatible
with 5.1ch surround sound, high definition
image quality (HD) movies are output in
5.1ch surround sound automatically. Standard
definition image quality (STD) movies are
converted to 2ch sound.
(Yellow)
A/V connecting cable (supplied)
(Yellow)
(White)
(Red)
4U2S
down/left/right/enter buttons of the remote
commander of your TV.
When you connect with A/V
connecting cable with S VIDEO
When the S VIDEO plug (S VIDEO channel)
is connected, audio signals are not output. To
output audio signals, connect the white and red
plugs to the audio input jack of your TV.
This connection produces higher resolution
images compared with the A/V connecting
cable.
Notes
There may be some operations you cannot do
with the remote commander.
To set your camcorder, touch
[Show others] [OTHER SETTINGS]
(under [GENERAL SET] category)
[CTRL FOR HDMI] [ON] (the default
setting)
(MENU)
.
Notes
Also set your TV. Refer to the instruction
manual of the TV for details.
The operation of “BRAVIA” Sync differs
according to each model of BRAVIA. Refer to
the instruction manual of your TV for details.
When you play back standard definition image
quality (STD) movies on a 4:3 TV that is not
compatible with the 16:9 signal, record movies
with 4:3 aspect ratio. Touch
(MENU)
[Show others] [OTHER REC SET]
(under
[SHOOTING SET] category)
Tips
[
WIDE SELECT] [4:3]
If you turn off the TV, your camcorder is turned
off simultaneously.
(p. 80).
Tips
If you connect your camcorder to the TV using
more than one type of cable to output images,
the order of priority of the TV input jacks is as
follows:
HDMI component S VIDEO video
HDMI (High Definition Multimedia Interface)
is an interface to send both video/audio signals.
The HDMI OUT jack outputs high quality
images and digital audio.
Using “BRAVIA”Sync
You can operate your camcorder with
the remote commander of your TV by
connecting your camcorder to a “BRAVIA”
Sync compatible TV launched in 2008 or
later with the HDMI cable.
You can operate the menu of your
camcorder by pressing the SYNC MENU
button of the remote commander of your
TV. You can display index screens such
as VISUAL INDEX, play selected movies
or display selected photos by pressing up/
US
4ꢀ
Making good use of your camcorder
Deleting movies and
photos
You can free media space by deleting
3
4
Touch and display the mark
on the movies or photos to be
deleted.
movies and photos from recording media.
Notes
You cannot restore images once they are
deleted. Save important movies and photos in
advance.
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting
the images. It may damage the recording media.
Do not eject memory card while deleting
images from the memory card.
You cannot delete protected movies and photos.
Undo the protection of the movies and photos
to delete them, before you try to delete them
(p. 45).
The demonstration movie on your camcorder
is protected.
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
Touch
[YES]
.
If the deleted movie is included in the Playlist
deleted also from the Playlist.
If the deleted movie is included in the saved
is also deleted from the scenario.
To delete all movies/photos at one time
In step 2, touch [ DELETE]
[
DELETE ALL]/[
DELETE ALL]
[YES] [YES]
.
To delete all photos at one time, touch
DELETE] [ DELETE ALL] [YES]
[YES]
Tips
[
You can delete an image on the playback screen
.
from
OPTION MENU.
To delete all images recorded in the recording
media, and recover all the recordable space of
the media, format the media (p. 85).
Reduced-size images which enable you to view
many images at the same time on an index
screen are called “thumbnails.”
To delete all the movies/photos
recorded on the same day at one time
Notes
You cannot delete photos on memory card by
recording date.
In step 2, touch [ DELETE]
[
DELETE by date]/[
DELETE
1
2
Touch
(MENU) [Show
by date].
others] [DELETE] (under
[EDIT] category).
To delete all photos on the same day at one
time, touch [ DELETE] [ DELETE
by date].
To delete movies, touch
[
[
DELETE] [
DELETE].
DELETE] or
To delete photos, touch [ DELETE]
DELETE].
[
4U4S
Protecting recorded
movies and photos
(Protect)
Touch
date of the desired movies/photos, then
touch
/
to select the recording
Protect movies and photos to avoid deleting
them by mistake.
.
Touch the image on the LCD screen to
Tips
confirm the image. Touch
to the previous screen.
to return
You can protect movies and photos on the
playback screen from
OPTION MENU.
Touch [YES]
.
1
Touch
(MENU) [Show
others] [PROTECT] (under
[EDIT] category).
2
3
To protect movies, touch
[
[
PROTECT]
PROTECT]/[
PROTECT].
To protect photos, touch [ PROTECT]
[ PROTECT].
Touch the movies and photos to
be protected.
is displayed on the selected images.
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
4
Touch
[YES]
.
To undo the protection of movies and
photos
Touch the movie or photo marked with
in step 3.
disappears.
US
45
Dividing a movie
To protect all the movies and photos
recorded on the same day at one time
1
Touch
(MENU) [Show
others] [ DIVIDE] (under
[EDIT] category).
Notes
You cannot select [ PRT. by date] for still
images recorded on the memory card.
In step 2, touch [ PROTECT]
2
3
Touch the movie to be divided.
[
PRT. by date]/[
PRT. by date].
The selected movie starts playback.
To protect all photos on the same day at
one time, touch [ PROTECT]
[
PRT. by date].
Touch
at the point where
you want to divide the movie into
scenes.
The movie pauses. Play and pause
toggles as you press
.
Touch
date of the desired movies/photos, then
touch
/
to select the recording
Adjusts the dividing point with more
precision after you selected the dividing
.
point with
.
Touch the image on the LCD screen to
confirm the image. Touch
to the previous screen.
to return
Touch [PROTECT]
.
To undo the protection of movies and
photos recorded on the same day at
one time
Returns to the beginning of the selected
movie
In step above, select the recording date
of the desired movies/photos, then touch
[UNPROTECT]
4
Touch
[YES]
.
.
Notes
You cannot restore movies once they are
divided.
You cannot divide protected movie. Undo the
protection of the movie to divide it, before you
try to divide it (p. 45).
4U6S
Capturing a photo
from a movie
Do not remove the battery pack or the AC
Adaptor from your camcorder while dividing
the movie. It may damage the recording media.
Also, do not eject the memory card while
dividing movies on the memory card.
1
Touch
others] [PHOTO CAPTURE]
(under [EDIT] category).
(MENU) [Show
A slight difference may occur from the point
The [PHOTO CAPTURE] screen
appears.
where you touch
and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
If you divide the original movie, the movie
added to the Playlist will also be divided.
If the divided movie is included in the saved
is deleted from the scenario.
Only simple editing is available on the
camcorder. Use the supplied software “PMB”
for more advanced editing.
2
3
Touch the movie to be captured.
The selected movie starts playback.
Touch
at the point where
you want to capture.
The movie pauses. Play and pause
toggles as you press
.
Tips
You can divide a movie on the playback screen
from
OPTION MENU.
Adjust the capturing point with more
precision after you selected the point with
.
Returns to the beginning of the selected
movie
4
Touch
.
When capturing is finished, the screen
returns to pause.
The captured photo is saved on the
recording media selected in [PHOTO
MEDIA SET] (p. 18).
To continue capturing, touch
repeat steps from step 3.
, then
To capture a photo from another movie,
touch , then repeat steps from step 2.
US
47
Dubbing/copying
movies and photos
from the internal
recording media to
memory card
5
Touch
.
Notes
Dubbing movies
The image size is fixed depending on the image
quality of the movie:
You can dub movies recorded on the
internal recording media of your camcorder
to memory card.
[
(HD)
[
2.1M] with high definition image quality
0.2M] in 16:9 (wide) with standard
Insert memory card into your camcorder
before the operation.
definition image quality (STD)
[VGA(0.3M)] in 4:3 with standard definition
image quality (STD)
The recording medium where you want to save
photos should have enough free space.
The recording date and time of captured photos
is the same as the recording date and time of
the movies.
If the movie you are capturing from has no data
code, the recording date and time of the photo
will be the date and time you captured from
the movie.
Notes
When you record a movie on the memory card
for the first time, create the image database file
by touching
[REPAIR IMG.DB F.] (under
(MENU) [Show others]
[MANAGE
MEDIA] category) [MEMORY CARD].
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC Adaptor to
prevent your camcorder from running out of
power during dubbing.
Tips
The original movie will not be deleted after
dubbing.
All included images in a Playlist will be dubbed.
The images recorded by this camcorder and
stored onto the recording media are called
“original.”
Touch
(MENU) [Show
others] [MOVIE DUB] (under
[EDIT] category).
The [MOVIE DUB] screen appears.
4UꢁS
Touch the type of dubbing.
Touch
[YES]
.
[DUB by select]: To select movies and
dub
[DUB by date]: To dub all movies of a
specified date
Tips
[
DUB ALL]: To dub the high
definition image quality (HD) Playlist
DUB ALL]: To dub the standard
To check the dubbed movies after dubbing is
finished, select [MEMORY CARD] on [MOVIE
MEDIA SET] and play them back (p. 18).
[
definition image quality (STD) Playlist
When you select the Playlist as the
source of dubbing, follow the on-screen
instructions to dub the Playlist.
Copying photos
You can copy photos from the internal
recording media of the camcorder to
memory card.
Select the movie to be dubbed.
Insert a memory card into your camcorder
before the operation.
[DUB by select]: Touch the movie to be
dubbed, and mark it with . You can
select multiple movies.
Notes
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC Adaptor to
prevent your camcorder from running out of
power during copying.
Touch
(MENU) [Show
others] [PHOTO COPY] (under
Remaining capacity of the
memory card
[EDIT] category).
The [PHOTO COPY] screen appears.
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
[DUB by date]: Select the recording
date of the movie to be dubbed, then
touch
dates.
. You cannot select multiple
Touch the type of copying.
[COPY by select]: To copy selected
photos
[COPY by date]: To copy all photos of
a specified date
US
49
Using the Playlist of
movies
The Playlist is a list showing thumbnails of
the movies that you have selected.
The original movies are not changed even
if you edit or erase the movies added to the
Playlist.
Select the photo to be copied.
[COPY by select]: Touch the photo to
be copied, and mark with . You can
select multiple photos.
Creating the Playlist
Notes
High definition image quality (HD) movies and
standard definition image quality (STD) movies
are added to an individual Playlist.
Press and hold the image down on the
screen to confirm the image. Touch
to return to the previous screen.
Touch
(MENU) [Show
[COPY by date]: Select the recording
date of the photo to be copied, then
others] [PLAYLIST EDIT]
(under
Touch [
[EDIT] category).
ADD] or [ ADD].
touch
dates.
. You cannot select multiple
Touch the movie to be added to
the Playlist.
Touch
[YES]
.
The selected movie is marked with
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
.
Tips
To check the copied photos after copying
is finished, select [MEMORY CARD] on
[PHOTO MEDIA SET] and play them back
(p. 18).
Touch
[YES]
.
5U0S
To add all the movies recorded on the
same day at one time
Playing the Playlist
Touch (MENU) [Show
In step 2, touch [
ADD by date].
ADD by date]/
[
others] [PLAYLIST] (under
[PLAYBACK] category).
The recording dates of movies are
displayed on the screen.
Movies added to the Playlist appear.
Touch
/
to select the recording
date of the desired movie, then touch
.
Touch the movie you want to
play back.
Touch the image on the LCD screen to
confirm the image. Touch
to the previous screen.
Touch [YES]
to return
The Playlist is played back from the
selected movie to the end, then the
screen returns to the Playlist screen.
.
Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while adding
movies to the Playlist. It may damage the
recording media. Also, do not eject the memory
card while editing movies on the memory card.
You cannot add photos to the Playlist.
You cannot create a Playlist which contains
both high definition image quality (HD) movies
and standard definition image quality (STD)
movies.
To erase unnecessary movies from the
Playlist
Touch
[PLAYLIST EDIT] (under
[EDIT] category).
Touch [ ERASE]/[
To erase all the movies from the Playlist,
touch [ ERASE ALL]/[ ERASE
(MENU) [Show others]
ERASE].
ALL] [YES] [YES]
Tips
.
You can add a maximum of 999 high definition
image quality (HD) movies, or 99 standard
definition image quality (STD) movies to the
Playlist.
Select the movie to be erased from the
list.
You can add a movie on the playback screen
or the Playlist screen by touching
(OPTION).
The selected movie is marked with
Press and hold the image down on the
.
LCD screen to confirm the image. Touch
to return to the previous screen.
US
51
Using the GPS function
(HDR-CX550V/XR550V)
What is GPS?
Touch
[YES]
.
The GPS (Global Positioning System) is a
system that calculates geographical location
from highly accurate US space satellites.
This system allows you to pinpoint your
exact location on the earth.
The following function is available if you
use the GPS function.
Your location
You can display the current location on
a map.
Tips
Even if you erase a movie from a Playlist, the
original movie is not deleted.
To change the order within the Playlist
Touch
[PLAYLIST EDIT] (under
[EDIT] category).
Touch [ MOVE]/[
(MENU) [Show others]
MOVE].
Select the movie to be moved.
Map Index
You can find a movie or photo on a map
by its recording location.
COORDINATES
You can display the coordinate
information during playback.
AUTO CLOCK ADJ/AUTO AREA ADJ
Your camcorder adjusts the clock
and the time difference on each area
automatically.
The selected movie is marked with
Touch the image on the LCD screen to
.
confirm the image. Touch
to the previous screen.
to return
Touch
.
Select the destination with
/
.
When you conduct the following operations
for the first time, a message appears to
confirm whether you assent with the license
agreement of the map data.
Touch
(
YOUR LOCATION) on
the recording screen.
Touch [ MAP] on the playback
screen.
Destination bar
Touch
[YES]
You can use the map data by touching
[YES] on the screen after assenting to the
supplied license agreement.
You cannot use the map data when you
touch [NO]. However, when you conduct
the above operations for the second time,
the same message will appear on the screen,
and you can use the map data by touching
[YES].
.
Tips
When you select multiple movies, the movies
are moved following the order appearing in the
Playlist.
5U2S
The GPS switch is set to ON in the default
setting. Movies and photos will be recorded
with location information. When your
camcorder cannot acquire the location
information, the last acquired location
information is recorded. If you do not want to
record location information, set the GPS switch
to OFF.
If the camcorder cannot track a satellite even
after waiting for several minutes, you are in
a difficult place to receive a GPS signal. Start
recording in the current state or move to a place
that is easier receive radio signals.
Setting the GPS function
Set the GPS switch to ON (
appears on
the LCD screen). Your camcorder starts
trying to triangulate. When your camcorder
triangulates successfully, it will record the
location information at the time movies
and photos were recorded.
Notes
Use the GPS function in outdoors. The
camcorder may not be able to receive radio
signals in places where radio signals are
blocked or reflected, such as indoors or a place
surrounded by buildings or trees.
The indicator changes according to the strength
of GPS signal reception.
Even if the camcorder is turned off, the GPS
function is working as long as the GPS switch
is set to ON. Make sure that the GPS switch
is set to OFF during takeoff and landing of an
airplane.
The dots in the lower right of
show GPS
GPS
indicators
Triangulating status
GPS reception status
signal quantity. When fewer than 3 dots are
displayed, the GPS signal is not stable enough
to triangulate in the current environment. Move
to an open area first, and turn the GPS switch to
OFF and ON again, or turn the power of your
camcorder off and on.
The GPS switch is
set to OFF, or the
GPS receiver is not
functioning normally.
No
indicator
Function off
Your camcorder
When search of satellite signal is unsuccessful
after a few minutes of searching, your
cannot find a GPS
signal, therefore, it
cannot triangulate.
Move to an open area
and turn on the GPS
switch again.
Your camcorder is
searching for a GPS
satellite signal. It may
take several minutes
to complete the
triangulation.
Your camcorder
is receiving a GPS
signal, and can acquire
location information.
Unable to
triangulate
camcorder quits searching for a satellite signal.
If your camcorder continues to display
(triangulation process not started) even after
moved to an open area, turn the GPS switch to
OFF and ON again, or turn the power of your
camcorder off and on.
Processing time can be shortened by entering
GPS assist data in the “GPS Support Tool” that
is installed together with the supplied software
“PMB”.
To start “GPS Support Tool” Click [Start]
[All Programs] [PMB] [PMB Launcher]
[GPS] [GPS Support Tool]. See the “GPS
Support Tool” help on the operation.
Processing
Triangulating
Triangulating
Your camcorder is
receiving a strong GPS
signal, and can acquire
location information.
US
5ꢀ
shows the default setting location or a location
acquired previously.
If you hold a certain point, the map keeps
scrolling.
Acquiring the current location
information
You can display the current location on a
map. Set the GPS switch to ON so that your
camcorder can acquire the current location
information.
You can also display the current location by
touching
(MENU) [Show others]
[
YOUR LOCATION] (under [OTHERS]
category).
Searching for a desired scene by
recording location (Map Index)
Touch
the recording screen.
(
YOUR LOCATION) on
Where movies and photos were recorded is
marked on a map. You can select a movie or
photo by recording location.
You can use the Map Index only with movies
and photos having location information that
was recorded with the GPS switch set to ON.
You cannot use the Map Index with photos
recorded on memory card.
The current location is displayed and
marked at the center of the LCD screen. If
you touch a certain point on the screen, the
map shows the area with that point at the
center.
Press
(VIEW IMAGES).
The VISUAL INDEX screen appears.
Touch
(your location) at the bottom
left of the LCD screen to move the current
location back to the center.
Touch [ MAP].
Returns to the VISUAL INDEX screen
Scale
To close the map screen
Touch
.
Previous
Next
Notes
The map always displays the north at the top.
Tips
You can change the scale using the zoom lever
(W: larger, T: smaller).
Image marker
Your camcorder acquires the current location
information every 10 seconds. The displays
of the center marker, etc., appear differently
according to the status of the current inquiry.
To display the current location on a map, touch
Displays photos
You can change the scale using the zoom lever
(W: larger, T: smaller).
The point you touch on the map scrolls to the
center automatically. If you hold a certain point,
the map keeps scrolling.
the
on the screen during triangulation.
When triangulation is unsuccessful, the map
will appear at the upper right corner of
5U4S
the thumbnail of the movie or photo without
location information.
Tips
You can also display the Map Index by touching
(MENU) [Show others] [VIEW
IMAGES] (under
[ MAP].
You can also search for the thumbnail of
the movie or photo you want to play by
[PLAYBACK] category)
Touch the image marker where
you recorded the movies and
photos to be played back.
touching
/
in step 3. The recording
location of the movie or photo will be
displayed at the center of the map.
Displaying the coordinate
information (COORDINATES)
During playback, your camcorder can
display the coordinates information
recorded on movies and photos.
The image marker turns red. The
movies or photos recorded at that
location are displayed on the left of the
screen.
Touch
(MENU) [Show
others] [DATA CODE] (under
[PLAYBACK] category)
[COORDINATES]
.
Touch the desired movie or
photo.
Latitude
Longitude
Playback starts from the selected scene.
Notes
The map always displays the north at the top.
When you record several movies and photos at
the same location, the movie or photo recorded
most recently will be displayed on the LCD
screen.
US
55
Adjusting the clock and the area
automatically (AUTO CLOCK ADJ/
AUTO AREA ADJ)
Your camcorder can maintain accurate
time and compensate for time difference
automatically, by acquiring time and
location information from GPS.
Touch
(MENU) [Show
others] [CLOCK/ LANG]
(under [GENERAL SET]
category) [AUTO CLOCK
ADJ]/[AUTO AREA ADJ].
Touch a desired setting
.
Notes
You must set the date and time on your
camcorder before using your camcorder (p. 15).
There may be discrepancies of a few seconds
even if [AUTO CLOCK ADJ] is activated.
The clock is adjusted automatically by
[AUTO CLOCK ADJ] when you turn off your
camcorder if the camcorder is receiving a GPS
signal while it is being used. The clock is not
adjusted until the camcorder is turned off. Also,
the clock is not adjusted unless the camcorder
is receiving a GPS signal, even if the GPS switch
is set to ON.
The [AUTO AREA ADJ] function automatically
compensates for a time difference when it
detects a time differences with the current area.
The clock may not be adjusted to the correct
time automatically, depending on the country/
region selected for your camcorder. In this case,
set [AUTO CLOCK ADJ] and [AUTO AREA
ADJ] to [OFF].
5U6S
Saving images with an external device
Saving images in
external media
(DIRECT COPY)
2
If the external media has the AC
power cable, connect it to the
wall outlet (wall socket).
You can save movies and photos on external
media (USB storage device), such as an
external hard disk drive. You can also play
back images on the camcorder or another
playback device.
3
4
Connect the USB Adaptor Cable
to the external media.
Notes
For this operation, you need the USB Adaptor
Cable VMC-UAM1 (sold separately).
The USB Adaptor Cable VMC-UAM1 may not
be available in some countries/regions.
You cannot use the following devices as an
external media.
media with a capacity exceeding 2 TB
ordinary disc drive such as CD or DVD drive
media connected via USB hub
Connect the USB Adaptor Cable
to the (USB) jack of your
camcorder.
When the [Create a new Image
Database File.] screen appears, touch
[YES].
media with built-in USB hub
card reader
You may not be able to use external media with
a code function.
FAT file system is available for your camcorder.
If the external media was formatted to NTFS
file system, etc., format the external media on
your camcorder before use. The format screen
appears when the external media is connected
to your camcorder.
USB Adaptor
Cable(sold
separately)
Operation is not assured with every device
satisfying requirements for operating.
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC adaptor (p. 14).
Refer to the instruction manual supplied with
the external media.
5
Touch [Copy.] on the camcorder
screen.
For details on available external media, go to the
Sony support website in your country/region.
Movies and photos in the internal
recording media of the camcorder that
have not yet been saved on to external
1
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder and
the wall outlet (wall socket).
media can be saved.
This screen will appear only when there
are newly recorded images.
US
57
To save desired movies and photos
6
After the operation is completed,
Notes
touch
on the camcorder
You cannot copy or search photos by date which
are recorded on the memory card.
screen.
Touch [Play without copying.] in step 5
above.
Notes
The VISUAL INDEX screen of the
external media is displayed.
The number of scenes you can save on the
external media are as follows. However, even if
the external media has free space, you cannot
save scenes exceeding the following number.
High definition image quality (HD) movies:
Max. 3,999
Standard definition image quality (STD)
movies: 9,999
Photos: 9,999 frames × 899 folders
The number of scenes may be smaller
depending on the type of images recorded.
Touch
(MENU) [Show others]
[MOVIE DUB] (when selecting
movies)/[PHOTO COPY] (when
selecting photos).
Follow the on-screen instructions to
select the recording media and image
selection methods.
When you selected [DUB by select],
touch the image to be saved.
When connecting an external media
appears.
The images saved in the external media
are displayed on the LCD screen. The
movie display and photo display buttons
on the VISUAL INDEX screen change as
illustrated below.
When you selected [DUB by date], select
the date of the images to be dubbed with
/
, then touch
and go
to step .
Remaining external media capacity
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
By touching date, you can search for
images by date.
You can make menu settings of the external
media such as deleting images. Touch
(MENU) [Show others] on the VISUAL
INDEX screen.
Touch
[YES]
on the
camcorder screen.
5UꢁS
Creating a disc with a
DVD writer, recorder
To play back images in the external
media on the camcorder
Touch [Play without copying.] in step 5
above.
Selecting the method for creating
a disc
Several methods for creating an AVCHD
disc or a standard definition image quality
(STD) disc from high definition image
quality (HD) movies or photos recorded on
your camcorder are described here. Select
the method that suits your disc player.
The VISUAL INDEX screen of the
external media is displayed.
You can also view images on a TV
connected to your camcorder (p. 41).
You can play back the high definition
image quality (HD) movies on your
computer using [Player for AVCHD]. Start
[Player for AVCHD], and select the drive
where the external media is connected
with [Settings].
Notes
Prepare a DVD disc such as a DVD-R, for
creating a disc.
media.
AVCHD format compatible device
Notes
The Date Index and Map Index (HDR-
CX550V/XR550V) of photos cannot be
displayed.
If your camcorder does not recognize the
external media, try the following operations.
Reconnect the USB Adaptor Cable to your
camcorder
Player
Sony Blu-ray disc player
PlayStation3, etc.
If the external media has the AC power cable,
connect it to the wall outlet (wall socket)
Creating device
To finish the external media connection
DVD writer, etc., other than DVDirect
Express (p. 63)
Touch
screen of the external media.
Disconnect the USB Adaptor Cable.
on the VISUAL INDEX
Disc type
AVCHD disc (high definition image quality
(HD))
US
59
Ordinary DVD device
Creating a disc with the dedicated
DVD writer, DVDirect Express
Player
DVD player
Computer that can play DVDs, etc.
You can create a disc or play back the
images on a created disc by using the
dedicated DVD writer, DVDirect Express
(sold separately).
Refer also to the instruction manual
supplied with the DVD writer.
Notes
Creating device
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 14).
Only unused discs of the following types can
be used:
12cm DVD-R
12cm DVD+R
DVD writer, other than DVDirect Express
(p. 63)
Disc type
Standard definition image quality (STD) disc
The device does not support two-layered discs.
DVDirect Express is referred to as “DVD
writer” in this section.
Notes
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder
and the wall outlet (wall socket)
(p. 14).
Always maintain your PlayStation3 to use
the latest version of the PlayStation3 system
software.
The PlayStation3 may not be available in some
countries/regions.
Delete the demonstration movie when dubbing
or creating discs. If it is not deleted, the
camcorder may not operate correctly. However,
you cannot recover the demonstration movie
once you delete it.
The AVCHD disc can be played back only on
AVCHD format compatible devices.
The AVCHD disc should not be used in DVD
players/recorders. Because DVD players/
recorders are not compatible with the AVCHD
format, DVD players/recorders may fail to eject
the disc.
Turn on your camcorder, and
connect the DVD writer to the
(USB) jack of your camcorder
with the USB cable of the DVD
writer.
You cannot create an AVCHD disc from a
movie recorded with [HD FX] mode of
[
REC MODE]. Save a movie recorded with
[HD FX] mode onto Blu-ray discs or external
storage devices (p. 57).
6U0S
To customize a disc with DISC BURN
OPTION
Perform this operation in the following
Insert an unused disc into the
DVD writer, and close the disc
tray.
cases:
When dubbing a desired image
When creating multiple copies of the same
disc
The [DISC BURN] screen appears on
the camcorder screen.
When converting high definition (HD)
movies to standard definition (STD) movies,
and creating a disc
Press
(DISC BURN) on the DVD
writer.
When dubbing images in the memory card
Touch [DISC BURN OPTION] in step 4.
Select the recording media containing
the movie(s) you want to save.
Movies recorded on the internal
recording media that have not been
saved on any discs will be recorded
When you select movies with high
definition image quality (HD), the
screen to select the image quality of the
disc to be created appears on the LCD
screen. Select the desired image quality,
onto the disc.
When there are unsaved high definition
(HD) and standard definition (STD)
image quality movies, they will be saved
on individual discs according to the image
quality.
and touch
.
The image quality of the disc depends on
the recording time of the selected movies
when you create a disc converting them
from high definition image quality (HD)
to standard definition image quality
(STD).
Repeat steps 3 and 4 when the
total memory size of movies to
be burnt exceeds that of the disc.
Touch the movie you want to burn on
the disc.
appears.
Touch
[END] [EJECT
DISC] on the camcorder screen.
Remove the disc after the operation is
completed.
Touch
USB cable.
, then disconnect the
Remaining Disc capacity
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
By touching date, you can search for
images by date.
US
61
To play back a disc on the DVD writer
Touch
[YES] on the camcorder
screen.
To create another disc of the same
contents, insert a new disc and touch
[CREATE SAME DISC].
After the operation is completed, touch
[EXIT] [END] on the camcorder
screen.
Disconnect the USB cable from your
camcorder.
Connect the AC Adaptor and the power
cord (mains lead) to the DC IN jack of
your camcorder and the wall outlet (wall
socket) (p. 14).
Turn on your camcorder, and connect
the DVD writer to the (USB) jack of
your camcorder with the USB cable of
Notes
Do not do any of the following when creating
a disc.
Turn off the camcorder
Disconnect the USB cable or the AC adaptor
Subject the camcorder to mechanical shock
or vibration
Eject the memory card from the camcorder
Play the created disc to make sure dubbing was
performed correctly before deleting the movies
on your camcorder.
If [Failed.] or [DISC BURN failed.] appears on
the screen, insert another disc into the DVD
writer and perform the DISC BURN operation
again.
the DVD writer.
You can play back movies on the TV
screen by connecting the camcorder to a
TV (p. 41).
Insert a created disc into the DVD
writer.
The movies on the disc appear as
VISUAL INDEX on the camcorder
screen.
Tips
Press the play button on the DVD writer.
You can also operate by the camcorder
screen.
Touch [END] [EJECT DISC] on the
camcorder screen and remove the disc
after the operation is completed.
If the total memory size of movies to be burnt
by the DISC BURN operation exceeds that of
the disc, disc creation stops when the limit is
reached. The last movie on the disc may be
cut off.
Disc creation time to dub movies to the limit
of the disc is about 20 to 60 minutes. It may
take more time depending on the recording
mode or the number of scenes. Also, if high
definition image quality (HD) is converted to
standard definition image quality (STD), image
quality conversion takes longer than the actual
recording.
Touch
and disconnect the USB
cable.
6U2S
To play back a disc on the ordinary DVD
player
Select the standard image quality (STD) on
the screen to select the image quality of the
disc to be created in step 2 of “To customize
a disc with DISC BURN OPTION.”
Turn on your camcorder, and
connect a DVD writer, etc. to the
(USB) jack of your camcorder
with the USB cable (supplied).
Tips
If you cannot play back created standard
definition (STD) image quality discs on any
DVD player, connect the camcorder to the
DVD writer, and then play back.
Creating a high definition image
quality (HD) disc with a DVD writer,
etc., other than DVDirect Express
Use USB cable to connect your camcorder
to a disc creation device, which is
compatible with high definition image
quality (HD) movies, such as a Sony DVD
writer. Refer also to the instruction manuals
supplied with the device to be connected.
The [USB SELECT] screen appears on
the camcorder screen.
If the [USB SELECT] screen does not
appear, touch
(MENU) [Show
others] [USB CONNECT] (under
[OTHERS] category).
Notes
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 14).
Sony DVD writer may not be available in some
countries/regions.
Always maintain the firmware of the Sony
DVDirect (DVD writer) to its latest version.
For details, see the following website.
http://sony.storagesupport.com/
Touch the recording media that
contains the images on the
camcorder screen.
[
USB CONNECT]: Internal
memory
[
USB CONNECT]: Internal hard
disk
[
USB CONNECT]: Memory card
The displayed recording media differ
depending on the model.
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder
and the wall outlet (wall socket)
(p. 14).
Record movies on the connected
device.
For details, refer to the instruction
manuals supplied with the device to be
connected.
US
6ꢀ
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
After the operation is completed,
touch [END] [YES] on the
camcorder screen.
Disconnect the USB cable.
A/V Remote Connector
Creating a standard definition
image quality (STD) disc with a
recorder, etc.
You can dub images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer, etc., other
than DVDirect Express, with the A/V
connecting cable. Connect the device in
either way of or . Refer also to the
instruction manuals supplied with the
devices to be connected.
Input
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
Notes
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 14).
(Red)
(Yellow)
Sony DVD writer may not be available in some
countries/regions.
High definition image quality (HD) movies
will be dubbed with standard definition image
quality (STD).
Signal flow
Insert the recording media in the
recording device.
If your recording device has an input
A/V connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
A/V connecting cable with S VIDEO
selector, set it to the input mode.
(sold separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
6U4S
When the screen size of display devices (TV,
etc.) is 4:3, touch (MENU) [Show
others] [OUTPUT SETTINGS] (under
cable (supplied) or an A/V
connecting cable with S VIDEO
(sold separately).
Connect your camcorder to the input jacks
of the recording device.
[GENERAL SET] category) [TV TYPE]
[4:3]
.
When you connect a monaural device, connect
the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.
Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied
with your recording device for details.
When dubbing is finished, stop
the recording device, and then
your camcorder.
Notes
Since dubbing is performed via analog data
transfer, the image quality may deteriorate.
You cannot dub images to recorders connected
with an HDMI cable.
To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, touch
(MENU) [Show
others] [OUTPUT SETTINGS] (under
[GENERAL SET] category) [DISP
OUTPUT] [LCD PANEL] (the default
setting)
.
To record the date/time, coordinates (HDR-
CX550V/XR550V), or camera settings data,
touch
[PLAYBACK SET] (under
category) [DATA CODE] a desired
(MENU) [Show others]
[PLAYBACK]
setting
addition, touch
. In
(MENU) [Show
others] [OUTPUT SETTINGS] (under
[GENERAL SET] category) [DISP
OUTPUT] [V-OUT/PANEL]
.
US
65
Customizing your camcorder
Using menus
Using the menus, you can perform useful functions and change various settings. If you make
good use of menu operations, you can enjoy using your camcorder.
The camcorder has various menu items under each of eight menu categories.
Operating menus
/
/
: The menu list moves from category to category.
: The menu list moves through 4 items at once.
You can touch buttons and drag the screen to scroll the list of the menu.
The selected category icon is displayed in orange.
When you touch
, the screen returns to the MY MENU screen.
Touch
(MENU).
Touch [Show others] on the MY MENU screen.
See the next page for details on MY MENU.
Touch the central part of the left side of screen to change the display.
Touch the menu item to be changed.
After changing the setting, touch
.
To finish setting the menu, touch
.
To return to the previous menu screen, touch
.
may not be displayed depending on the menu item.
6U6S
Notes
You may not be able to set some menu items, depending on the recording or playback conditions.
Grayed out menu items or settings are not available.
Tips
Depending on the menu items being changed, your camcorder switches between playback mode and
recording mode (movie/photo).
Using MY MENU
You can use the menu items more easily by registering the menu items you use most often on
MY MENU. You can register 6 menu items on each MY MENU of the MOVIE, PHOTO, and
PLAYBACK.
Example: deleting [SPOT MTR/FCS] and registering [ FADER]
Touch
(MENU).
Touch [MY MENU SETTING].
Touch [MOVIE].
Touch [SPOT MTR/FCS].
Touch
Touch [ FADER] (under
When MY MENU is displayed, touch
.
[MANUAL SETTINGS] category).
.
Repeat the same steps above to register menu items on MY MENU, and enjoy using your
“Handycam.”
Tips
When an external storage device is connected, the exclusive MY MENU appears.
US
67
Using the OPTION MENU
The OPTION MENU appears just like the pop-up window that appears when you right-click
the mouse on a computer. When
the OPTION MENU. You touch
appear.
is displayed at bottom-right of the screen, you can use
, and the menu items you can change in the context
Menu item
Tab
Touch
(OPTION).
Touch the desired tab the item to change the setting.
After completing the setting, touch
.
Notes
Grayed out menu items or settings are not available.
When the item you want is not on the screen, touch another tab. (There may be no tab.)
The tabs and items that appear on the screen depend on the recording/playback status of your camcorder
at the time.
6UꢁS
Menu lists
(MANUAL SETTINGS) category
SCENE SELECTION
FADER
(PHOTO SETTINGS) category
SELF-TIMER
IMAGE SIZE
STEADYSHOT
FLASH MODE
FLASH LEVEL
REDEYE REDUC
FILE NO.
WHITE BAL.
SPOT MTR/FCS
SPOT METER
SPOT FOCUS
EXPOSURE
FOCUS
TELE MACRO
AE SHIFT
WB SHIFT
(PLAYBACK) category
VISUAL INDEX
VIEW IMAGES
DATE INDEX
MAP*1
GOLF SHOT
SMTH SLW REC
FILM ROLL
(SHOOTING SET) category
FACE
/
SET
PLAYLIST
HIGHLIGHT
SCENARIO
REC MODE
GUIDEFRAME
STEADYSHOT
CONVERSION LENS
LOW LUX
FACE DETECTION
PRIORITY SETTING
SMILE DETECTION
SMILE SENSITIVITY
AUDIO REC SET
BLT-IN ZOOM MIC
MICREF LEVEL
AUDIO MODE
PLAYBACK SET
/
SET
DATA CODE
(EDIT) category
DELETE
DELETE
DELETE
SCENARIO ERASE
ERASE
ERASE ALL
PROTECT
OTHER REC SET
DIGITAL ZOOM
AUTO BACK LIGHT
DIAL SETTING
PROTECT
PROTECT
DIVIDE
NIGHTSHOT LIGHT
X.V.COLOR
PHOTO CAPTURE
MOVIE DUB
DUB by select
DUB by date
DUB ALL/
WIDE SELECT
DUB ALL
US
69
PHOTO COPY
COPY by select
COPY by date
PLAYLIST EDIT
ADD/
ADD by date/
REPAIR IMG.DB F.
INT. MEMORY*2
HDD*3
MEMORY CARD
ADD
ERASE 51
(GENERAL SET) category
SOUND/DISP SET
VOLUME
ERASE/
ERASE ALL/
ERASE ALL
BEEP
MOVE/
MOVE
LCD BRIGHT
LCD BL LEVEL
LCD COLOR
(OTHERS) category
YOUR LOCATION*1
USB CONNECT
DISPLAY SET
USB CONNECT*2
USB CONNECT*3
USB CONNECT
OUTPUT SETTINGS
TV TYPE
Operating Guide
COMPONENT
HDMI RESOLUTION
DISP OUTPUT
CLOCK/ LANG
CLOCK SET
DISC BURN
TV CONNECT Guide
MUSIC TOOL
EMPTY MUSIC
DOWNLOAD MUSIC
BATTERY INFO
AREA SET
AUTO CLOCK ADJ*1
AUTO AREA ADJ*1
DST SET/SUMMERTIME
LANGUAGE SET
POWER SETTINGS
A.SHUT OFF
(MANAGE MEDIA) category
MEDIA SETTINGS
MOVIE MEDIA SET
PHOTO MEDIA SET
MEDIA INFO
OTHER SETTINGS
DEMO MODE
CALIBRATION
CTRL FOR HDMI
DROP SENSOR*3
REC LAMP
MEDIA FORMAT
INT. MEMORY*2
HDD*3
MEMORY CARD
REMOTE CTRL
*1 HDR-CX550V/XR550V
*2 HDR-CX550/CX550V
*3 HDR-XR550/XR550V
7U0S
MANUAL
SETTINGS
(Items to adjust for scene
condition)
PORTRAIT (Soft portrait)
(
)
Brings out the subject such
as people or flowers while
creating a soft background.
The default settings are marked with .
SPOTLIGHT**(
)
Prevents people’s faces from
appearing excessively white
when subjects are lit by
strong light.
SCENE SELECTION
You can record images effectively in various
situations.
AUTO
BEACH** (
Takes the vivid blue of the
ocean or a lake.
)
Records images in average image quality
without the [SCENE SELECTION] function.
TWILIGHT* (
)
SNOW** (
Takes bright pictures of a
white landscape.
)
Maintains the darkening
atmosphere of the distant
surroundings in twilight
scenes.
*
Adjusted to focus on subjects farther away
only.
** Adjusted not to focus on subjects a short
TWILIGHT PORT. (
)
Enables to take photos of
people and background
using a flash.
distance away.
Notes
Even if you set [TWILIGHT PORT.], the setting
changes to [AUTO] in movie recording mode.
If you set [SCENE SELECTION], [WHITE
BAL.] setting is canceled.
SUNRISE&SUNSET* (
Reproduces the atmosphere
of scenes such as sunsets or
sunrises.
)
FIREWORKS* (
Takes spectacular shots of
fireworks.
)
FADER
You can record a transition with the
following effects adding to the interval
between scenes.
Select the desired effect in [STBY] (to
fading in) or [REC] (to fading out) mode.
LANDSCAPE*(
)
Shoots distant subjects
clearly. This setting also
prevents your camcorder
from focusing on glass or
metal mesh in windows
between the camcorder and
the subject.
OFF
Does not use an effect.
US
71
WHITE FADER
Fades in/out with the white effect.
Out
INDOOR ()
The white balance is appropriately adjusted
for the following recording conditions:
In
In
Indoors
At party scenes or studios where the
lighting conditions change quickly
Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
BLACK FADER
Fades in/out with the black effect.
Out
ONE PUSH (
)
The white balance will be adjusted
according to the ambient light.
Touch [ONE PUSH].
Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will shoot the
subject.
To cancel the fader before starting the
operation, touch [OFF].
Tips
Touch [
].
When you press START/STOP, the setting is
cleared.
A movie recorded using [BLACK FADER] may
be difficult to see in the VISUAL INDEX screen.
flashes quickly. When the white
balance has been adjusted and stored in the
memory, the indicator stops flashing.
Notes
WHITE BAL. (White balance)
Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool
white fluorescent lamps.
You can adjust the color balance to the
brightness of the recording environment.
When you select [ONE PUSH], keep framing
white objects while
flashes slowly if [ONE PUSH] could not
be set.
When [ONE PUSH] was selected, if
is flashing quickly.
keeps
, set [WHITE
flashing after touching
BAL.] to [AUTO].
If you set [WHITE BAL.], [SCENE
SELECTION] is set to [AUTO].
AUTO
The white balance is adjusted automatically.
Tips
OUTDOOR (
The white balance is appropriately adjusted
for the following recording conditions:
)
If you have changed the battery pack while
[AUTO] was selected, or taken your camcorder
outdoors after inside use (or vice versa), aim
your camcorder at a nearby white object for
about 10 seconds for better color balance
adjustment.
When the white balance has been set with
[ONE PUSH], if the lighting conditions
changed by bringing your camcorder outdoors
Outdoors
Night views, neon signs and fireworks
Sunrise or sunset
Under daylight fluorescent lamps
7U2S
from inside the house, or vice versa, you need
to redo the [ONE PUSH] procedure to readjust
the white balance.
touch [AUTO].
Notes
[EXPOSURE] is automatically set to
[MANUAL].
SPOT MTR/FCS (Spot meter/
focus)
SPOT FOCUS
You can adjust the brightness and focus
for the selected subject simultaneously.
This function enables you to use [SPOT
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
Touch the subject in the frame of which you
want to adjust the focus.
To adjust the focus automatically, touch
[AUTO].
Touch the subject in the frame of which you
want to adjust the brightness and focus.
To adjust the brightness and focus
automatically, touch [AUTO].
Notes
[FOCUS] is automatically set to [MANUAL].
Notes
[EXPOSURE] and [FOCUS] are automatically
set to [MANUAL].
EXPOSURE
You can fix the brightness of a picture
manually. Adjust the brightness when the
subject is too bright or too dark.
SPOT METER (Flexible spot
meter)
You can adjust and fix the exposure
to the subject, so that it is recorded in
suitable brightness even when there is
strong contrast between the subject and
the background, such as subjects in the
spotlight on stage.
Touch
/
to adjust the brightness.
To adjust the exposure automatically, touch
[AUTO].
Tips
You can also adjust manually by using the
MANUAL dial (p. 31).
Touch the subject in the frame of which you
want to adjust the exposure.
To return the setting to automatic exposure,
US
7ꢀ
FOCUS
TELE MACRO
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
This is useful to shoot small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
OFF
Cancels TELE MACRO. (TELE MACRO is
also canceled when you move the zoom lever
to the W side.)
Touch
(nearby subject)/
(distant
ON (
)
subject) to adjust the focus.
(telephoto) side automatically and allows
recording subjects at a close distance down to
about 32 cm (12 5/8 in.).
To adjust the focus automatically, touch
[AUTO].
Notes
When you set [FOCUS] to [MANUAL],
appears.
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 31 1/2 in.) for
telephoto.
Notes
Tips
When recording a distant subject, focusing may
be difficult and can take some time.
when it is hard to focus automatically.
appears when the focus cannot be adjusted
any closer, and appears when the focus
cannot be adjusted farther away.
It is easier to focus on the subject by moving
the power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle)
to adjust the zoom for recording. When you
want to record a subject at close range, move
the power zoom lever to W (wide angle), then
adjust the focus.
AE SHIFT
You can adjust the exposure manually.
OFF
Adjusts the exposure automatically.
The focal distance information (distance at
which the subject is focused on; used as a guide
if it is dark and focus adjustment is difficult)
appears for a few seconds in the following cases.
(This information will not display correctly if a
conversion lens (sold separately) is being used.)
When the focus mode is switched from
automatic to manual
ON ( and the adjustment value)
Adjusts the exposure manually.
Tips
You can adjust the automatic exposure level to
brighter or darker when [EXPOSURE] is set to
[AUTO].
Touch
backlight is bright, or touch
is black or the light is dim.
if the subject is white or the
When you set focus manually
You can also adjust manually by using the
MANUAL dial (p. 31).
if the subject
7U4S
You can also adjust manually by using the
MANUAL dial (p. 31).
Notes
The size of photos becomes 1,920 1,080.
You cannot record sound.
Image quality is not as good as that of normal
recording.
WB SHIFT (White Balance Shift)
You cannot use [GOLF SHOT] when you set
the image quality to standard definition image
quality (STD).
You can adjust the white balance manually.
OFF
Adjusts the white balance automatically.
Tips
ON ( and the adjustment value)
You can set the self-timer by touching
(OPTION). With [SELF-TIMER] set to [ON],
press START/STOP to start countdown of the
timer. The point when countdown reaches 0 is
assumed as the moment of impact and motion
before and after 0 is recorded.
If camera shake is excessive, or there are moving
objects in the background during recording,
image analysis will not be performed effectively,
and images may contain noise as a result. It is
recommended that you record images under
stable conditions (for example, using a tripod).
Impact sound may be detected by the internal
microphone even when an external microphone
is attached.
Adjusts the white balance manually.
Tips
When the white balance is set to a lower value,
images appear bluish, and when set to a higher
value, images appear reddish.
You can also adjust manually by using the
MANUAL dial (p. 31).
GOLF SHOT
Divides 2 seconds of fast movement into
frames which are then recorded as a
movie and photos. You can view a series
of movement when playing back, which is
convenient in cases such as checking golf
swing or tennis form.
SMTH SLW REC (Smooth slow
rec)
Fast moving subjects and actions, which
cannot be captured under the ordinary
shooting conditions, can be shot in smooth
moving slow-motion for about 3 seconds.
Press START/STOP on the [SMTH SLW
REC] screen.
An about-3-second movie is recorded
as a 12-second-slow-motion movie.
[Recording…] disappears, when recording
is finished.
On the [GOLF SHOT] screen, frame the
subject in the white guide frame in the
center of the screen, then press START/
STOP. The 0.5 second point before START/
STOP is pressed is assumed as the moment
of impact, and the period of 1.5 seconds
before and 0.5 second after it (2 seconds
total) is recorded. When impact sound
is detected, the recording time period is
automatically adjusted according to that
moment.
Touch
to cancel the smooth slow
recording.
US
75
SHOOTING SET
(Items for customized
To change the setting
shooting)
Touch
(OPTION), then select the
The default settings are marked with .
setting you want to change.
[TIMING]
Select the recording start point after
START/STOP is pressed. The default
setting is [3sec AFTER].
/
SET
See page 27.
The point when START/STOP is pressed.
REC MODE (Recording
mode)
See page 28.
[3sec AFTER]
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical.
The frame is not recorded.
[3sec BEFORE]
Notes
You cannot record sound.
Image quality is not as good as that of normal
recording.
OFF
Does not display the guide frame.
ON
Displays the guide frame.
Tips
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
The outer frame of [GUIDEFRAME] shows the
display area of a TV which is not compatible
with full pixel display.
When recording with the viewfinder, the outer
frame of [GUIDEFRAME] is not displayed.
7U6S
[OFF], you cannot also set [FLASH MODE]
(p. 81).
STEADYSHOT
You can compensate for camera shake.
Set [ STEADYSHOT] to [OFF] (
LOW LUX
)
when using a tripod (sold separately), then
the image becomes natural.
You can record bright color images, even in
dim light.
ACTIVE
OFF
Provides a more powerful SteadyShot effect.
The LOW LUX function is not used.
STANDARD
Provides the SteadyShot effect under relatively
stable recording conditions.
ON ( )
The LOW LUX function is used.
OFF (
)
FACE DETECTION
The SteadyShot function is not used.
Detects the faces of your subjects
and adjusts the focus/color/exposure
automatically. Also, it adjusts the image
quality of face parts more finely, in the case
of the high definition image quality (HD)
movies.
Notes
If you change the setting of
[
STEADYSHOT], the imaging field will also
change accordingly.
You can magnify images up to 10 times using
optical zooming, unless [ STEADYSHOT] is
set to [ACTIVE].
ON
Detects faces.
CONVERSION LENS
OFF (
)
When using a conversion lens (sold
separately), use this function to record
using the optimum compensation for
camera shake and focus for the lens.
Does not detect faces.
Notes
Faces may not be detected depending on
recording conditions, subject conditions, and
the setting of your camcorder.
[FACE DETECTION] may not function
properly depending on recording conditions.
Set [FACE DETECTION] to [OFF] in this case.
OFF
Select this when you do not use a conversion
lens.
WIDE CONVERSION (
)
Select this when you use a wide-conversion
lens.
Tips
For better face detection performance, shoot the
subject(s) under the following conditions:
Shoot in a sufficiently bright place
The subject(s) does not wear glasses, a hat
or mask
TELE CONVERSION (
)
Select this when you use a tele-conversion
lens.
The subject(s) faces directly towards the
camera
The detected faces are recorded in Face Index,
however, some faces may not be. Also, there
Note
The built-in flash is not flashed when
[CONVERSION LENS] is set to other than
US
77
is a limit to the number of faces that can be
recorded in Face Index. To play back from the
Face Index, see page 37.
the setting of your camcorder.
When [DUAL CAPTURE] is selected,
appears on the screen in movie recording
standby, and changes into
recording starts.
when movie
PRIORITY SETTING
Selects the priority subject for the face
detection or the smile shutter.
Adjusts focus/color/exposure automatically
for the selected faces.
SMILE SENSITIVITY
Sets the smile detection sensitivity using the
Smile Shutter function.
HIGH
AUTO
Detects even a slight smile.
Detects faces automatically.
MEDIUM
Detects a normal smile.
CHILD PRIORITY
Detects with priority on a child’s face.
LOW
Detects a big smile.
ADULT PRIORITY
Detects with priority on an adult’s face.
Tips
AUDIO REC SET
When you specify the priority subject by
touching the detection frame on the LCD
screen, the face with a double-lined frame has
priority (p. 28).
BLT-IN ZOOM MIC (Built-in zoom
microphone)
You can record a movie with vivid sound
appropriate to the zoom position.
SMILE DETECTION
OFF
The shutter is released when the camcorder
detects a smile (Smile Shutter).
The microphone does not record sound
following zooming in or out.
DUAL CAPTURE (
)
ON (
)
Only during movie recording, the shutter is
released automatically, when the camcorder
detects a smile.
The microphone records sound following
zooming in or out.
ALWAYS ON (
)
MICREF LEVEL (Microphone
The shutter is released when the camcorder
detects a smile whenever the camcorder is in
recording mode.
reference level)
You can select the microphone level for
recording sound.
OFF
NORMAL
Smiles are not detected, so photos are not
recorded automatically.
Records various ambient sounds, converting
them into the appropriate level.
Notes
Smiles may not be detected depending on
recording conditions, subject conditions, and
7UꢁS
AUTO BACK LIGHT
Your camcorder adjusts the exposure for
backlit subjects automatically.
LOW (
)
Records ambient sound faithfully. Select
[LOW] when you want to record an exciting
and powerful sound in a concert hall, etc.
(This setting is not suitable for recording
conversations.)
ON
Adjusts the exposure for backlit subjects
automatically.
AUDIO MODE
You can change the recording sound
format.
OFF
Does not adjust the exposure for backlit
subjects.
5.1ch SURROUND (
Records sound in 5.1ch surround.
)
DIAL SETTING
You can select an item you want to set to
the MANUAL dial. For details, see page 31.
2ch STEREO (
Records sound in 2ch stereo.
)
NIGHTSHOT LIGHT
you can record clearer images by activating
[NIGHTSHOT LIGHT], which emits
infrared light (invisible).
OTHER REC SET
DIGITAL ZOOM
You can select the maximum zoom level.
Note that the image quality decreases when
you use the digital zoom.
ON
Emits infrared light.
OFF
Does not emit infrared light.
Notes
your fingers or other objects.
Remove the conversion lens (sold separately).
The maximum shooting distance using
[NIGHTSHOT LIGHT] is about 3 m (10 feet).
The zooming zone appears when you select
[120×].
OFF
X.V.COLOR
Up to 14× zoom is performed.
You can capture wider range of colors.
Various colors such as the brilliant color of
flowers and turquoise blue of the sea can
be more faithfully reproduced. Refer to the
instruction manuals of the TV.
120×
Up to 120× zoom is performed digitally.
Note
When [ STEADYSHOT] is set to other
than [ACTIVE], up to 10× zoom is performed
optically.
OFF
Records in ordinary color range.
US
79
PHOTO SETTINGS
(Items for recording photos)
ON (
Records in x.v.Color.
)
The default settings are marked with .
Notes
SELF-TIMER
Set [ X.V.COLOR] to [ON] when the
recorded movie will be played back on an
x.v.Color-compliant TV.
If the movie recorded with this function [ON] is
played back on a non-x.v.Color-compliant TV,
the color may not be reproduced correctly.
[ X.V.COLOR] cannot be set to [ON]:
When recording standard definition image
quality (STD) movies
Press PHOTO to start the count down. A
photo is recorded after about 10 seconds.
OFF
Cancels the self-timer.
ON (
)
Starts the self-timer recording. To cancel the
recording, touch [RESET].
While recording a movie
WIDE SELECT
Tips
You can also operate by pressing PHOTO on
the Wireless Remote Commander (p. 123).
When recording standard definition image
quality (STD) movies, you can select the
horizontal to vertical ratio according to the
TV connected. Refer also to the instruction
manuals supplied with your TV.
IMAGE SIZE
You can select a photo size to be shot.
16:9 WIDE
Records movies to the full screen on a 16:9
(wide) TV screen.
12.0M (
)
Records photos in the highest quality (4,000
× 3,000).
4:3 (
)
9.0M (
)
Records movies to the full screen on a 4:3
TV screen.
Records photos in the high quality in the 16:9
(wide) ratio (4,000 × 2,250).
6.2M (
)
Notes
Records photos clearly (2,880 × 2,160).
Set [TV TYPE] correctly according to the TV
connected for playback (p. 87).
1.9M (
)
Allows you to record more photos in
relatively clear quality (1,600 × 1,200).
VGA(0.3M) (
)
Allows the maximum number of photos to be
recorded (640 × 480).
Notes
The selected image size is effective when the
(Photo) lamp is lit.
photos.
ꢁU0S
than [OFF], you cannot also set [FLASH
MODE].
STEADYSHOT
The built-in flash is not flashed in movie
recording mode.
You can compensate for camera shake.
Set [ STEADYSHOT] to [OFF] (
)
when using a tripod (sold separately), then
the image becomes natural.
FLASH LEVEL
You can set this function when you
record photos using the built-in flash, or
an external flash (sold separately) that is
compatible with your camcorder.
ON
The SteadyShot function is used.
OFF (
)
The SteadyShot function is not used.
HIGH (
)
Makes the flash level higher.
FLASH MODE
NORMAL ( )
You can select the flash setting when you
record photos using the built-in flash, or
an external flash (sold separately) that is
compatible with your camcorder.
LOW (
Makes the flash level lower.
)
REDEYE REDUC (Redeye
reduction)
AUTO
Automatically flashes when there is
insufficient ambient light.
You can set this function when you
ON ( )
record photos using the built-in flash, or
an external flash (sold separately) that is
compatible with your camcorder.
Always uses the flash regardless of the
surrounding brightness.
When you set [REDEYE REDUC] to [ON],
then set [FLASH MODE] to [AUTO] or
OFF (
Records without flash.
)
[ON],
appears. You can prevent redeye
Notes
by activating the pre-flash before the flash
flashes.
The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
1.5 m (11 7/8 to 59 1/8 in.).
Remove any dust from the surface of the flash
before using it. Flash effect may be impaired if
heat discoloration or dust obscures the lamp.
while charging the flash, and remains lit when
the battery charge is complete.
If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
The built-in flash is not flashed when
OFF
Does not prevent redeye.
ON (
Prevents redeye.
)
Notes
The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
The redeye function does not work with
automatic recording by [SMILE DETECTION].
US
ꢁ1
PLAYBACK
(Items for playback)
FILE NO. (File number)
You can select the way to assign file number
of photos.
VISUAL INDEX
See page 33.
SERIES
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
VIEW IMAGES
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
DATE INDEX
See page 36.
RESET
MAP (HDR-CX550V/XR550V)
Assigns file numbers in sequence, following
the largest file number existing on the
recording medium.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
See page 52.
FILM ROLL
See page 36.
FACE
See page 37.
PLAYLIST
See page 50.
HIGHLIGHT
See page 37.
SCENARIO
See page 38.
PLAYBACK SET
/
SET
See page 27.
DATA CODE
During playback, your camcorder displays
the information (Date/time, Camera data,
Coordinates) recorded automatically at the
time of recording.
ꢁU2S
Aperture value
Exposure
Flash
OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
COORDINATES (HDR-CX550V/XR550V)
See page 55.
CAMERA DATA
Displays camera setting data.
Tips
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE
on the Wireless Remote Commander:
[DATE/TIME] [CAMERA DATA]
[COORDINATES](HDR-CX550V/XR550V)
[OFF] (no indication).
COORDINATES*
Displays coordinates.
* HDR-CX550V/XR550V
DATE/TIME
Depending on the recording media condition,
bars [--:--:--] appear.
Date
Time
CAMERA DATA
Movie
Photo
SteadyShot off
Brightness
White balance
Gain
Shutter speed
US
ꢁꢀ
OTHERS
(Items for other settings)
EDIT
(Items for editing)
The default settings are marked with .
DELETE
YOUR LOCATION (HDR-
CX550V/XR550V)
See page 44.
SCENARIO ERASE
See page 52.
See page 38.
USB CONNECT
PROTECT
See page 63.
See page 45.
TV CONNECT Guide
See page 41.
DIVIDE
See page 46.
MUSIC TOOL
See page 39.
PHOTO CAPTURE
See page 47.
BATTERY INFO
You can check the estimated remaining
capacity of the battery.
MOVIE DUB
See page 48.
PHOTO COPY
See page 49.
PLAYLIST EDIT
To close the battery information screen
See page 50.
Touch
.
ꢁU4S
MANAGE MEDIA
(Items for recording media)
the memory card from your camcorder (The
access lamp is lit or flashing while formatting
memory card.).
MEDIA SETTINGS
To prevent data on the internal
recording media from being recovered
See page 18.
[EMPTY] allows you to write unintelligible
data onto the internal recording media of
the camcorder. In this way it may become
more difficult to recover any original
data. When you dispose of or transfer the
camcorder, it is recommended that you
perform [EMPTY].
MEDIA INFO
You can check the remaining recordable
time for each recording mode of the
recording media for movies and the
approximate free and used media space of
the recording media.
When the internal recording media is
selected on the [MEDIA FORMAT] screen,
touch [EMPTY].
To turn off the display
Touch
.
Notes
Since there is a management file area, the
used space is not displayed as 0 % even if you
perform [MEDIA FORMAT] (p. 85).
Tips
Only the information of the medium selected
Change the medium setting if necessary.
Notes
Connect the AC Adaptor to the wall outlet (wall
socket). You cannot perform [EMPTY] unless
you connect the AC Adaptor to the wall outlet
(wall socket).
MEDIA FORMAT
To avoid the loss of important images, they
should be saved on a computer or other devices
before performing [EMPTY].
Disconnect all cables except the AC Adaptor.
Do not disconnect the AC Adaptor during the
operation.
While deleting data, do not apply any vibrations
or shocks to your camcorder.
The actual performing time for deleting data is
as follows;
HDR-CX550/CX550V: about 6 minutes
HDR-XR550/XR550V: about 120 minutes
If you stop performing [EMPTY] while
[Executing…] appears, be sure to complete the
operation by performing [MEDIA FORMAT]
or [EMPTY] when you use the camcorder next
time.
Formatting deletes all the movies and
photos to recover recordable free space.
Select the recording media to be formatted,
touch [YES] [YES]
.
Notes
Connect your camcorder to the wall outlet (wall
socket) using AC Adaptor supplied for this
operation (p. 14).
To avoid the loss of important images, you
should save them before formatting the
recording media.
Protected movies and photos will also be
deleted.
While [Executing…] is displayed, do not close
the LCD screen, operate the buttons on the
camcorder, disconnect the AC Adaptor, or eject
US
ꢁ5
GENERAL SET
(Other setup items)
REPAIR IMG.DB F.
The default settings are marked with .
See page 96, 101.
SOUND/DISP SET
VOLUME
You can adjust the volume of playback
sound by touching
/
.
BEEP
ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
LCD BRIGHT
You can adjust the brightness of the LCD
screen by touching
/
.
Tips
This adjustment does not affect the recorded
images in any way.
LCD BL LEVEL (LCD backlight level)
You can select the brightness of the LCD
screen’s backlight.
NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
Notes
When you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor, [BRIGHT] is automatically selected
for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel
ꢁU6S
to the camcorder body, the setting becomes
[NORMAL] automatically.
OUTPUT SETTINGS
Tips
TV TYPE
This adjustment does not affect the recorded
images in any way.
You need to convert the signal depending
on the TV connected when playing back
movies and photos. The recorded movies
and photos are played back as following
illustrations.
LCD COLOR
You can adjust the color of the LCD screen
by touching
/
.
16:9
Tips
Select this to view your movies on a 16:9
(wide) TV. The recorded movies and photos
are played back as shown below.
This adjustment does not affect the recorded
images in any way.
DISPLAY SET
You can set the duration of displaying the
icons or indicators on the LCD screen.
Movies and photos Movies and photos
recorded in 16:9 recorded in 4:3 mode
(wide) mode
AUTO1
Displays for about 3 seconds. The rec & zoom
buttons on the LCD is displayed.
AUTO2
4:3
Displays for about 3 seconds. The rec & zoom
buttons on the LCD is not displayed.
Select this to view your movies and photos on
a 4:3 standard TV. The recorded movies and
photos are played back as shown below.
ON
Always displays. The rec & zoom buttons on
the LCD is not displayed.
Movies and photos Movies and photos
recorded in 16:9 recorded in 4:3 mode
(wide) mode
Tips
The icons or indicators are displayed in the
following cases.
When you turn on your camcorder.
The LCD screen is touched (Except rec &
zoom buttons on LCD).
When you switch your camcorder to the
movie recording, photo recording, or
playback modes.
Notes
Horizontal to vertical ratio of high definition
image quality (HD) movies is 16:9.
When you connect your camcorder to a TV
compatible with the ID-1/ID-2 system, set [TV
TYPE] to [16:9]. The TV switches to full mode
automatically. Refer also to the instruction
manuals supplied with your TV.
US
ꢁ7
STD CONTENTS
Set the output image resolution recorded with
standard definition image quality (STD).
COMPONENT
Select [COMPONENT] when connecting
your camcorder to a TV with the
component input jack.
AUTO
Normal setting (outputs the signal according
to the TV automatically).
480i
Select this when connecting your
camcorder to a TV with the component
input jack.
480p
Outputs the 480p signal.
480i
1080i/480i
Outputs the 480i signal.
Select this when connecting your
camcorder to a TV that has the component
input jack and is capable of displaying the
1080i signal.
DISP OUTPUT (Display output)
You can set where the screen displays are to
be output.
HDMI RESOLUTION
LCD PANEL
Shows displays such as the time code on the
LCD screen or viewfinder.
Select the output image resolution when
connecting your camcorder to a TV with an
HDMI cable (sold separately).
V-OUT/PANEL
Shows displays such as the time code on
the LCD screen or viewfinder, and on the
TV screen.
HD CONTENTS
Set the output image resolution recorded with
high definition image quality (HD).
AUTO
Normal setting (outputs the signal according
to the TV automatically).
CLOCK/ LANG
1080p
Outputs the 1080p signal.
CLOCK SET
See page 15.
1080i
Outputs the 1080i signal.
AREA SET
You can adjust a time difference without
stopping the clock. Set your local area when
using your camcorder in other time zones.
Refer to the world time difference on page
720p
Outputs the 720p signal.
480p
Outputs the 480p signal.
AUTO CLOCK ADJ (Auto clock
adjustment) (HDR-CX550V/XR550V)
See page 56.
ꢁUꢁS
AUTO AREA ADJ (Auto area
adjustment) (HDR-CX550V/XR550V)
OTHER SETTINGS
See page 56.
DEMO MODE
When your camcorder is connected to a
wall outlet (wall socket), a demonstration
movie appear about 10 minutes after you
turn on the (Movie) lamp by pressing
MODE.
DST SET/SUMMERTIME
You can change this setting without
stopping the clock. Set to [ON] to move the
time forward 1 hour.
OFF
ON
Does not set the DST SET.
The demonstration appears.
ON
OFF
Sets the DST SET.
The demonstration does not appear.
LANGUAGE SET
Notes
You can select the language to be used on
the LCD screen.
In the default setting, the demonstration movie
is in the VISUAL INDEX. If you delete the
demonstration movie, you cannot recover it.
A movie you have recorded will be registered as
the demonstration movie if it satisfies all of the
following conditions.
Tips
Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot find
your native tongue among the options.
The movie is protected
The movie is the first one displayed on the
VISUAL INDEX screen
POWER SETTINGS
The movie is saved on the internal recording
media
The movie is recorded with high definition
image quality (HD)
A.SHUT OFF (Auto shut off)
You can set your camcorder to turn off
automatically when you do not operate
your camcorder for more than about 5
minutes.
Tips
When you set this item to [ON] and touch
, the demonstration starts playing.
The demonstration will be suspended:
When you press START/STOP or PHOTO
When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes)
5min
The camcorder turns off automatically.
NEVER
The camcorder does not turn off
automatically.
When you turn on the
(Photo) lamp
When you press
(VIEW IMAGES)
Notes
CALIBRATION
See page 115.
When you connect your camcorder to a
wall outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
US
ꢁ9
DROP SENSOR (HDR-XR550/XR550V)
REC LAMP (Recording lamp)
Your camcorder detects that it is dropping,
and protects the internal hard disk.
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
ON
Activates the drop sensor. When it is detected
that the camcorder is dropping, you may
not be able to record or play back images
correctly, to protect the internal hard disk.
ON
The camera recording lamp lights up.
OFF
The camera recording lamp does not light up.
When dropping is detected,
appears.
OFF (
)
REMOTE CTRL (Remote control)
Deactivates the drop sensor.
ON
Notes
Select this when you use the supplied Wireless
Remote Commander (p. 123).
Set the drop sensor to [ON] when you use
the camcorder. Otherwise, if you drop the
camcorder, you may damage the internal hard
disk.
In a non-gravity situation, the drop sensor
activates. When you record images during an
activity such as roller-coasting or skydiving, you
can set [DROP SENSOR] to [OFF] so as not to
activate the drop sensor.
OFF
Select this when you do not use supplied
Wireless Remote Commander.
Tips
Select [OFF] when you want to prevent your
camcorder from responding to a command sent
by another remote control unit.
CTRL FOR HDMI (Control for HDMI)
When connecting your camcorder to a
“BRAVIA” Sync compatible TV with the
HDMI cable (sold separately), you can play
back movies on your camcorder by aiming
the TV’s Remote Commander at the TV
(p. 43).
ON
Operates your camcorder using the TV’s
Remote Commander.
OFF
Does not operate your camcorder using the
TV’s Remote Commander.
9U0S
Additional information
Troubleshooting
If you run into any problems using your
camcorder, follow the steps below.
Examples of functions that cannot be used
inspect your camcorder.
Disconnect the power source, attach
the power source again after about 1
minute, and turn the camcorder on.
Overall operations/Wireless
Remote Commander
object, and turn the camcorder on.
If you press RESET, all settings,
The power does not turn on.
Attach a charged battery pack to the
camcorder (p. 12).
The plug of the AC Adaptor has been
disconnected from the wall outlet (wall
socket). Connect it to the wall outlet (wall
socket) (p. 12).
including the clock setting, are reset.
Contact your Sony dealer or local
authorized Sony service facility.
The camcorder does not operate even
when the power is set to on.
Your camcorder may be required to initialize or
change the current internal recording media of
your camcorder, depending on the problem. In
the event of this, the data stored on the internal
recording media will be deleted. Be sure to
save the data on the internal recording media
on other media (backup) before sending your
camcorder for repair. We will not compensate
you for any loss of internal recording media
data.
During repair, we may check a minimum
amount of data stored on the internal recording
media in order to investigate the problem.
However, your Sony dealer will neither copy
nor retain your data.
It takes a few seconds for your camcorder to
be ready to shoot after the power is turned on.
This is not a malfunction.
Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
If the functions still do not work, press RESET
RESET, all settings, including the clock setting,
are reset.)
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Leave your camcorder with the
power of your camcorder on. Turn off your
camcorder and take it to a warm place. Leave
the camcorder there for a while, then turn on
your camcorder.
Overall operations/Wireless Remote
Playing back images stored on memory card on
US
91
The menu settings have changed
automatically.
Another DVD device malfunctions when
you use the supplied Wireless Remote
Commander.
The following menu items return to the
default settings in more than 12 hours after
you close the LCD screen.
[SCENE SELECTION]
[WHITE BAL.]
Select a commander mode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
[SPOT MTR/FCS]
[SPOT METER]
[SPOT FOCUS]
[EXPOSURE]
[FOCUS]
[LOW LUX]
[BLT-IN ZOOM MIC]
[MICREF LEVEL]
[AUTO BACK LIGHT]
[IRIS]
Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.
In the default setting, when about 5 minutes
have elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the setting
power again.
[SHUTTER SPEED]
[DROP SENSOR] (HDR-XR550/XR550V)
The following menu items return to the
default settings when you switch between
movie recording and photo recording and
playback modes.
The /CHG (flash/charge) lamp does
not light while the battery pack is being
charged.
[ FADER]
[TELE MACRO]
[ SELF-TIMER]
Attach the battery pack to the camcorder
correctly (p. 12).
Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
Your camcorder gets warm.
Your camcorder may become warm during
operation. This is not a malfunction.
The /CHG (flash/charge) lamp flashes
while the battery pack is being charged.
The supplied Wireless Remote
Commander does not function.
If the temperature of the battery pack is too
high or too low, you may not be able to charge
it (p. 112).
Attach the battery pack to the camcorder
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
Insert a battery into the battery holder with
the +/– polarities correctly matching the
+/– marks (p. 124).
Remove any obstructions between the
Wireless Remote Commander and the remote
sensor.
Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
9U2S
The remaining battery time indicator does
not indicate the correct time.
The image in the viewfinder is not clear.
Move the viewfinder lens adjustment lever
The ambient temperature is too high or too
low. This is not a malfunction.
until the image appears clearly (p. 23).
The battery pack has not been charged
enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a new one (p. 113).
The indicated time may not be correct
depending on the environment of use.
The image in the viewfinder has
disappeared.
Close the LCD panel. Even if the viewfinder
is pulled out, no image is displayed in the
viewfinder when the LCD panel is open
(p. 16).
The battery pack is quickly discharged.
Memory card
The ambient temperature is too high or low.
This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a new one (p. 113).
Operations using the memory card
cannot be performed.
If you use the memory card formatted on a
computer, format it again on your camcorder
(p. 85).
LCD screen/viewfinder
Images stored on the memory card
cannot be deleted.
Menu items are grayed out.
The maximum number of images that you can
delete on the index screen at one time is 100.
You cannot delete the protected images.
You cannot select grayed items in the current
recording/playback situation.
There are some functions you cannot activate
simultaneously (p. 98).
The data file name is not indicated
correctly or flashes.
The buttons do not appear on the touch
panel.
The file is damaged.
The file format is not supported by your
camcorder (p. 112).
Touch the LCD screen lightly.
Press DISPLAY on the Wireless Remote
Commander (p. 123).
Recording
The buttons on the touch panel do not
work correctly or do not work at all.
Refer also to “Memory card” (p. 93).
Adjust the touch panel ([CALIBRATION])
(p. 115).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
The buttons on the touch panel quickly
disappear.
to turn on the
(p. 21).
(Movie) or (Photo) lamp
Your camcorder is recording the image you
have just shot on the recording media. You
US
9ꢀ
cannot make new recording during this
period.
The recording media is full. Delete
unnecessary images (p. 44).
Even if auto flash or
(Auto redeye
reduction) is selected, you cannot use the
flash with:
NightShot
Total number of movie scenes or photos
exceeds the recordable capacity of your
images (p. 44).
you may not record images. (HDR-XR550/
XR550V)
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
[IRIS] or [SHUTTER SPEED] that is assigned
to the MANUAL dial
[SPOT MTR/FCS]
[SPOT METER]
[MANUAL] in [EXPOSURE]
[TWILIGHT], [SUNRISE&SUNSET],
[FIREWORKS], [LANDSCAPE],
[SPOTLIGHT], [BEACH] or [SNOW] in
[SCENE SELECTION]
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter, for
example when recording a fast moving object,
etc. (p. 104).
Photos cannot be recorded.
You cannot record photos together with:
[ FADER]
[GOLF SHOT]
The camcorder stops operating.
[SMTH SLW REC]
When [ REC MODE] is set to [HD FX], you
cannot record photos while recording movies.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the memory card.
The imaging field looks different.
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.
The flash does not work.
You cannot record with the built-in flash
while:
the
(movie) lamp is on
[CONVERSION LENS] is set to other than
[OFF]
9U4S
The horizontal to vertical ratio of the
movie (16:9 (wide)/4:3) cannot be
changed.
Horizontal stripes appear on the images.
This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
The horizontal to vertical ratio of high
definition image quality (HD) movies is 16:9
(wide).
Black bands appear when you record a TV
screen or computer screen.
The auto focus does not function.
Set [ STEADYSHOT] to an option except
for [ACTIVE] (p. 77).
The recording conditions are not suitable for
auto focus. Adjust the focus manually (p. 74).
[LCD BL LEVEL] cannot be adjusted.
You cannot adjust [LCD BL LEVEL] when:
The LCD panel is closed on your camcorder
with the LCD screen facing out.
SteadyShot does not function.
Set [ STEADYSHOT] to [ACTIVE] or
[STANDARD], [ STEADYSHOT] to [ON]
(p. 77, 81).
The power is supplied from the AC Adaptor.
Even if [ STEADYSHOT] is set to
[ACTIVE] or [STANDARD],
Magnification changes when the
recording mode is switched.
[
STEADYSHOT] to [ON], your camcorder
You cannot use digital zoom when your
camcorder is in the photo recording mode.
may not be able to compensate for excessive
vibrations.
Sound is not recorded correctly.
The subjects passing by the screen very
fast appear crooked.
If you disconnect an external microphone, etc.
during recording movies, sound may not be
recorded correctly.
Connect the microphone again in the same
way as when you start recording movies.
This is called the focal plane phenomenon.
This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
image signals, the subjects passing by the lens
rapidly might appear crooked depending on
the recording conditions.
Playback
The color of the image is not correctly
displayed.
Images cannot be played back.
Select the type of recording media you want to
play back (p. 18).
Select the image quality of the movie you want
to play back (p. 27).
Images recorded on other devices may not be
played back. This is not a malfunction.
Press NIGHTSHOT to cancel the NightShot
function (p. 30).
The screen image is bright, and the
subject does not appear on the screen.
Press NIGHTSHOT to cancel the NightShot
function (p. 30).
US
95
Change the sound to 2ch when creating a disc
using the supplied software “PMB.”
Photos cannot be played back.
Photos cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
Record sound with [AUDIO MODE] set to
[2ch STEREO] (p. 79).
is indicated on an image on the
VISUAL INDEX screen.
The demonstration movies cannot be
played.
This may appear on an image recorded on
other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery
pack while the recording media icon at the top
right corner of the screen flashes, or before
the access lamp is turned off after recording.
Select the internal recording media for the
recording media, and the high definition
image quality (HD).
The demonstration movie is deleted.
This may damage your image data and
displayed.
is
A movie is played back automatically.
Movies play automatically as a demonstration
movie when the filmed movie fulfills a certain
not a malfunction.
is indicated on an image on the
VISUAL INDEX screen.
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Show others] [REPAIR
Playing back images stored on
memory card on other devices
IMG.DB F.] (under
category) the recording medium. If it still
[MANAGE MEDIA]
Images cannot be played back or the
memory card is not recognized.
No sound or only a quiet sound is heard
during playback.
The playback device does not support playing
back memory cards (p. 3).
Sound is quiet when the LCD screen is closed
facing out. Open the LCD screen.
When you record sound with [MICREF
sound may be difficult to hear.
Editing movies/photos on your
camcorder
Sounds cannot be recorded while shooting
with [SMTH SLW REC] or [GOLF SHOT].
Unable to edit.
Unable to edit because of the condition of the
image.
Left and right sound will be heard
unbalanced when playing back movies on
computers or other devices.
Movies cannot be added in the Playlist.
There is no free space in the recording media.
You can add no more than 999 high definition
image quality (HD) movies, or 99 standard
definition image quality (STD) movies, to a
Change the sound conversion type (downmix
type) when playing back on 2ch stereo devices.
Refer to the instruction manual supplied with
your playback device for details.
9U6S
Playlist. Erase unnecessary movies from the
Playlist (p. 51).
You cannot add photos in the Playlist.
The image appears distorted on the 4:3
TV.
This happens when viewing an image
recorded in the 16:9 (wide) mode on a 4:3 TV.
the image.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.
Black bands appear at the top and bottom
of the screen of the 4:3 TV.
A photo cannot be captured from a
movie.
This happens when viewing an image recorded
in the 16:9 (wide) mode on a 4:3 TV. This is
not a malfunction.
The recording media where you want to save
photos is full.
Playback on the TV
Dubbing/Connecting to other
devices
Neither image nor sound is played on the
connected TV.
Images are not dubbed correctly.
When you are using the component A/V
cable, set [COMPONENT] according to the
requirements of the connected device (p. 88).
When you are using the component video
plug, make sure the red and white plugs of the
A/V connecting cable are connected (p. 42).
Images are not output from the HDMI OUT
jack, if copyright protection signals are
recorded in the images.
You cannot dub images using the HDMI cable
(sold separately).
The A/V connecting cable is not connected
properly. Make sure to connect the cable to the
input jack of another device (p. 64).
GPS (HDR-CX550V/XR550V)
When you are using the S VIDEO plug,
make sure the red and white plugs of the A/V
connecting cable are connected (p. 43).
The camcorder is not receiving a GPS
signal.
Your camcorder may not be able to receive
radio signals from GPS satellites because of
obstructions. Bring your camcorder to an
open area, and set the GPS switch to ON
situations where radio signals may not reach.
The top, bottom, right, and left edges
of images are trimmed slightly on a
connected TV.
The LCD screen of your camcorder can
display recording images across the entire
screen (full pixel display). However, this may
cause slight trimming of the top, bottom, right,
and left edges of images when played back on
a TV which is not compatible with full pixel
display.
It is recommended you record images using
the outer frame of [GUIDEFRAME] (p. 76)
as a guide.
The current location on the map of the
camcorder is different from the actual
current location.
The margin of error of the radio signal from
GPS satellites is large. The margin of error can
be as wide as several-hundred meters at the
maximum.
US
97
Cannot use
Because of following settings
Connecting to a Computer
“PMB”cannot be installed.
[FACE
DETECTION]
NightShot, [GOLF SHOT],
[SMTH SLW REC],
[
DIGITAL ZOOM],
[SPOT MTR/FCS],
Check the computer environment or
installation procedure required to install
“PMB”.
[SPOT METER], [SPOT
FOCUS], [EXPOSURE],
[FOCUS], [TWILIGHT],
[SUNRISE&SUNSET],
[FIREWORKS],
“PMB”does not work correctly.
[LANDSCAPE],
Quit “PMB” and restart your computer.
[SPOTLIGHT], [BEACH],
[SNOW], [WHITE BAL.],
The camcorder is not recognized by the
computer.
[
FADER], [ SELF-
TIMER]
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in the correct order.
[PRIORITY
SETTING]/
[SMILE
NightShot, [GOLF SHOT],
[SMTH SLW REC],
[
DIGITAL ZOOM],
DETECTION]/
[SMILE
[SPOT MTR/FCS],
[SPOT METER], [SPOT
FOCUS], [EXPOSURE],
[FOCUS], [TWILIGHT],
[SUNRISE&SUNSET],
[FIREWORKS],
SENSITIVITY]
[LANDSCAPE],
Examples of functions that cannot
be used simultaneously
[SPOTLIGHT], [BEACH],
[SNOW], [WHITE BAL.],
[
FADER], [ SELF-
The following list shows examples of
unworkable combinations of functions and
menu items.
TIMER]
[SCENE
SELECTION]
NightShot, [GOLF SHOT],
[SMTH SLW REC], [LOW
LUX], [ FADER], [TELE
MACRO]
Cannot use
Because of following settings
[IRIS] and
[SHUTTER
SPEED] in the
MANUAL dial
items
NightShot
Self-diagnosis display/Warning
indicators
INTELLIGENT
AUTO
[GOLF SHOT], [SMTH SLW
REC]
If indicators appear on the LCD screen or
viewfinder, check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
9UꢁS
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
C:(or E:) :(Self-diagnosis display)
C:04:
The battery pack is not an “InfoLITHIUM”
battery pack (V series). Use an
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
“InfoLITHIUM” battery pack (V series)
(p. 112).
(Low temperature warning)
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 12).
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder warm.
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(Warning indicator pertaining to
memory card)
C:13:
/ C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 19.
E:
:
(Warning on the internal hard disk of
the camcorder)
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
format the memory card (p. 85).
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Show others] [REPAIR
Fast flashing
The internal hard disk of the camcorder is full.
An error may have occurred with the internal
hard disk of the camcorder.
(Battery level warning)
IMG.DB F.] (under
[MANAGE MEDIA]
Slow flashing
category) the recording medium.
The battery pack is nearly used up.
Depending on the operating environment or
The memory card is damaged.
battery conditions,
are about 20 minutes remaining.
may flash, even if there
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 85).
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
US
99
When [ REC MODE] is set to [HD FX], you
cannot record photos while recording movies.
(Warning indicator pertaining to
incompatible memory card)
(Warning indicator pertaining to smile
shutter)
(Warning indicator pertaining to
the write-protect of the memory card)
The smile shutter cannot be used with the
current setting of the camcorder.
Access to the memory card was restricted on
another device.
Tips
(Warning indicator pertaining to the
flash)
You may hear a melody when some warning
indicators appear on the screen.
Fast flashing
There is something wrong with the flash.
Description of warning messages
If messages appear on the screen, follow the
instructions.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
Recording media
Internal memory format error.
HDD format error.
The internal recording media of the
camcorder is set differently from the default
format. Performing [MEDIA FORMAT]
This will delete all data in the internal
recording media.
(Warning indicator pertaining to drop
sensor)
and has detected that the camcorder has
been dropped. Therefore, the camcorder is
taking steps to protect the internal hard disk.
Recording/playback may be disabled as a
result.
The drop sensor function does not guarantee
the protection of the internal hard disk under
all possible situations. Use the camcorder
under stable conditions.
Data error.
An error occurred during reading or writing
the internal recording media of the camcorder.
If the message is preceded by a GPS indicator,
there may be some trouble with the GPS
receiver. Turn on your camcorder again.
(HDR-CX550V/XR550V)
This may occur when you keep applying shock
on the camcorder.
Movies recorded on other devices may not be
played back.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
10U0S
The Image Database File is damaged. Do
you want to create a new file?
HD movie management information is
damaged. Create new information?
Buffer overflow
You cannot record because the drop sensor
senses a drop of the camcorder repeatedly.
If you are at risk of dropping the camcorder
constantly, set [DROP SENSOR] to [OFF],
and you may be able to record the image again
(p. 90).
The management file is damaged. When
you touch [YES], a new management file
is created. The old recorded images on the
media cannot be played back (Image files are
not damaged). If you execute [REPAIR IMG.
DB F.] after creating new information, playing
back the old recorded images may become
possible. If it does not work, copy the image
using the supplied software.
Recovering data.
Your camcorder tries to recover data
automatically if the data writing was not
performed properly.
Cannot recover data.
There is no HD movie management
information. Create new information?
Writing data onto the media of the camcorder
has failed. Attempts were made to recover the
data, but they were unsuccessful.
You cannot record or play back movies
because no high definition image quality (HD)
movie management information exists. If you
touch [YES], new management information
is created and you can record or play back
movies with high definition image quality
(HD).
Reinsert the memory card.
Reinsert the memory card a few times. If even
then the indicator flashes, the memory card
could be damaged. Try with another memory
card.
You can record standard definition image
quality (STD) movies or photos.
This memory card is not formatted
correctly.
Inconsistencies found in Image Database
File. Do you want to repair the Image
Database File?
The Image Database File is damaged. Do
you want to repair the Image Database
File?
Inconsistencies found in Image Database
File. Cannot record or play HD movies. Do
you want to repair the Image Database
File?
you format the memory card, all the recorded
movies and photos are deleted.
Still picture folder is full. Cannot record
still pictures.
You cannot create folders exceeding
999MSDCF. You cannot create or delete
created folders using your camcorder.
folders using your computer.
The management file is damaged, and you
cannot record movies or photos. Touch [YES]
to repair.
You can record photos on a memory card.
This memory card may not be able to
record or play movies.
Use a memory card recommended for your
camcorder (p. 19).
US
101
This memory card may not be able to
record or play images correctly.
Use a memory card recommended for your
camcorder (p. 19).
Do not eject the memory card during
writing. Data may be damaged.
Reinsert the memory card, and follow the
instructions on the LCD screen.
Other
No further selection is possible.
You can select only 100 images at one time for:
Deleting movies/photos
Protecting movies/photos, or releasing the
protection
Dubbing movies
Copying photos
Editing the Playlist of high definition image
quality (HD) movies
Data protected.
You tried to delete protected data. Release the
protection of the data.
10U2S
Recording time of
movies/number of
recordable photos
“HD” stands for high definition image
quality, and “STD” stands for standard
image quality.
Typical recording time shows the time when
you repeat recording start/stop, switching the
MODE lamp, and zooming.
Times measured when using the camcorder at
25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is
recommended.
The recording and playback time will be
shorter when you use your camcorder in low
temperatures.
Expected time of recording and
playback with each battery pack
The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
Recording time
Approximate time available when you use a
fully charged battery pack.
Playing time
Approximate time available when you use a
fully charged battery pack.
HDR-CX550/CX550V
(unit: minute)
Battery pack
Continuous
recording time
Typical recording
time
HDR-CX550/CX550V
(unit: minute)
Image quality
HD STD
HD STD
NP-FV50
(supplied)
NP-FV70
100
110
215
230
430
455
140
150
290
315
580
625
50
55
105
115
215
225
70
75
145
155
290
310
Battery pack
Image quality
NP-FV50
(supplied)
HD
190
215
395
440
STD
240
280
490
565
NP-FV100
NP-FV70
NP-FV100
785
870
980
1120
HDR-XR550/XR550V
(unit: minute)
Battery pack
Continuous
recording time
Typical recording
time
HDR-XR550/XR550V
(unit: minute)
STD
Image quality
NP-FV50
(supplied)
HD STD
HD STD
Battery pack
90
95
125
135
45
45
60
65
Image quality
NP-FV50
(supplied)
HD
155
170
325
355
650
710
200
225
415
465
830
925
NP-FV70
190
205
260
280
95
100
130
140
NP-FV70
NP-FV100
385
405
515
555
190
200
255
275
NP-FV100
Top: When the LCD screen is opened
Bottom: When recording with the viewfinder
without opening the LCD screen
Each recording time is measured when the
Top: When the LCD screen is opened
Bottom: When playing with the viewfinder
without opening the LCD screen
[
REC MODE] is set to HQ.
US
10ꢀ
Standard definition image quality (STD) in h (hour) and
m (minute)
Expected recording time of movies
Recording mode
Recording time
Internal memory
HDR-CX550/CX550V
HDR-XR550 HDR-XR550V
59 h 40 m 59 h 20 m
[STD HQ]
(5.1ch)*
[STD HQ]
(2ch)*
High definition image quality (HD) in h (hour) and m
(minute)
61 h 20 m 61 h 10 m
Recording mode
Recording time
HDR-CX550 HDR-CX550V
* You can change the recording sound format with
[AUDIO MODE] (p. 79).
[HD FX]
[HD FH]
[HD HQ]
[HD LP]
(5.1ch)*
6 h 5 m
6 h
7 h 45 m 7 h 40 m
15 h 50 m 15 h 35 m
25 h 35 m 25 h 15 m
Tips
You can record movies of a maximum of 3,999
scenes with high definition image quality (HD),
and 9,999 scenes with standard definition image
quality (STD).
The maximum continuous recording time of
movies is approximately 13 hours.
[HD LP]
(2ch)*
26 h 55 m 26 h 35 m
If you want to record up to the maximum
recording time indicated in the table, you need
to delete the demonstration movie on your
camcorder.
Your camcorder uses the VBR (Variable Bit
Rate) format to automatically adjust image
quality to suit the recording scene. This
technology causes fluctuations in the recording
time of the media. Movies containing quickly
moving and complex images are recorded at
a higher bit-rate, and this reduces the overall
recording time.
Standard definition image quality (STD) in h (hour) and
m (minute)
Recording mode
Recording time
HDR-CX550 HDR-CX550V
15 h 50 m 15 h 35 m
[STD HQ]
(5.1ch)*
[STD HQ]
(2ch)*
16 h 15 m 16 h 5 m
Internal hard disk
HDR-XR550/XR550V
High definition image quality (HD) in h (hour) and m
(minute)
Recording mode
Recording time
HDR-XR550 HDR-XR550V
23 h 22 h 50 m
29 h 20 m 29 h 10 m
59 h 30 m 59 h 20 m
96 h 30 m 96 h 10 m
[HD FX]
[HD FH]
[HD HQ]
[HD LP]
(5.1ch)*
[HD LP]
(2ch)*
101 h 20 m
101 h
10U4S
Memory card
Expected number of recordable
photos
High definition image quality (HD)
(unit: minute)
AVC HD AVC HD AVC HD AVC HD AVC HD
Internal recording media
You can record the maximum 9,999 photos.
24M
(FX)
17M 9M (HQ) 5M (LP) 5M (LP)
(FH)
5.1ch* 2ch*
20 20
(15) (15)
45 45
Memory card
1GB
2GB
4GB
8GB
16GB
5
(5)
10
6
(6)
10
(9)
12.0M
10
25
(10) (10) (15) (35) (35)
1GB
2GB
4GB
8GB
16GB
32GB
165
335
670
20
(20) (25) (40) (70) (75)
40 55 115 185 195
(40) (55) (80) (150) (155)
85 110 230 375 395
(85) (110) (160) (300) (315)
25
55
90
95
1350
2750
5500
32GB 175 225 465 750 790
(175) (225) (325) (605) (630)
The selected image size is effective when the
(Photo) lamp is lit.
The number of recordable photos of memory
card shown is for the maximum image size
of your camcorder. The actual number of
recordable photos is displayed on the LCD
screen during recording (p. 119).
The number of recordable photos of memory
card may vary depending on the recording
conditions.
Standard definition image quality (STD)
(unit: minute)
STD 9M (HQ) 5.1ch*
STD 9M (HQ) 2ch*
1GB
2GB
4GB
8GB
16GB
32GB
10
10
(10)
(10)
25
(25)
55
(50)
115
(100)
230
(205)
25
(25)
55
(50)
115
(105)
235
(210)
Notes
The unique pixel array of Sony’s ClearVid and
the image processing system (BIONZ) allow
still image resolution equivalent to the sizes
described.
Tips
You can also use memory card with a capacity
of under 1 GB for recording photos.
The following list shows the bit-rate, pixels and
aspect ratio of each recording mode (movie +
audio, etc.).
465
(415)
475
(425)
* You can change the recording sound format with
[AUDIO MODE] (p. 79).
High definition image quality (HD):
FX: Max. 24Mbps 1,920 1,080 pixels/16:9
FH: Approx. 17Mbps (average) 1,920 1,080
pixels/16:9
HQ: Approx. 9Mbps (average) 1,440 1,080
pixels/16:9
Notes
The recordable time may vary depending on the
recording and subject conditions and [ REC
MODE] (p. 28).
The number in ( ) is the minimum recordable
time.
US
105
LP: Approx. 5Mbps (average) 1,440 1,080
pixels/16:9
Standard definition image quality (STD):
HQ: Approx. 9Mbps (average) 720 480
pixels/16:9, 4:3
The photo recording pixels and the aspect ratio.
Photo recording mode:
4,000 3,000 dots/4:3
4,000 2,250 dots/16:9
2,880 2,160 dots/4:3
1,600 1,200 dots/4:3
640 480 dots/4:3
Dual recording:
3,840 2,160 dots/16:9
2,880 2,160 dots/4:3
Capturing a photo from a movie:
1,920 1,080 dots/16:9
640 360 dots/16:9
640 480 dots/4:3
10U6S
Using your camcorder
abroad
Power supply
On TV color systems
You can use your camcorder in any
Your camcorder is a NTSC-system-based
camcorder. If you want to view the playback
image on a TV, it must be a NTSC-system-
based TV with an AUDIO/VIDEO input
jack.
countries/regions using the AC Adaptor
supplied with your camcorder within the
AC 100 V to 240 V, 50 Hz/60 Hz range.
Viewing high definition image quality
(HD) movies
System
Used in
NTSC
Bahama Islands, Bolivia,
Canada, Central America,
Chile, Colombia, Ecuador,
Guyana, Jamaica, Japan,
Korea, Mexico, Peru, Surinam,
Taiwan, the Philippines, the
USA, Venezuela, etc.
In countries/regions where 1080/60i is
supported, you can view the movies with
the same high definition image quality
(HD) as that of the recorded movies.
You need an NTSC-system-based and
1080/60i compatible TV (or monitor) with
component and AUDIO/VIDEO input
jacks. A component A/V cable or an HDMI
cable (sold separately) must be connected.
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia, New
Zealand, Norway, Poland,
Portugal, Singapore, Slovak
Republic, Spain, Sweden,
Switzerland, Thailand, United
Kingdom, etc.
Viewing standard definition image
quality (STD) movies
To view standard definition image quality
(STD) movies, you need a NTSC-system-
based TV with AUDIO/VIDEO input
jacks. An A/V connecting cable must be
connected.
PAL-M
PAL-N
SECAM
Brazil
Argentina, Paraguay, Uruguay
Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
US
107
Setting to the local time
You can easily set the clock to the local time by setting a time difference when using your
camcorder abroad. Touch
(MENU) [Show others] [CLOCK/ LANG] (under
HDR-CX550V/XR550V
When [AUTO CLOCK ADJ] and [AUTO AREA ADJ] are set to [ON], the clock is set to the
local time automatically by the GPS function (p. 88).
World time difference
Time-zone
differences
Area setting
Time-zone
differences
Area setting
+10:00
+11:00
+12:00
Melbourne, Sydney
Solomon Is
Fiji, Wellington, Eniwetok,
Kwajalein
Samoa
Hawaii
GMT
Lisbon, London
Berlin, Paris
Helsinki, Cairo, Istanbul
Moscow, Nairobi
Tehran
Abu Dhabi, Baku
Kabul
Karachi, Islamabad
Calcutta, New Delhi
Almaty, Dhaka
Yangon
Bangkok, Jakarta
Hong Kong, Singapore,
Beijing
Seoul, Tokyo
Adelaide, Darwin
+01:00
+02:00
+03:00
+03:30
+04:00
+04:30
+05:00
+05:30
+06:00
+06:30
+07:00
+08:00
–11:00
–10:00
–09:00
–08:00
–07:00
–06:00
–05:00
–04:00
–03:30
–03:00
–02:00
–01:00
Alaska
Los Angeles, Tijuana
Denver, Arizona
Chicago, Mexico City
New York, Bogota
Santiago
St.John’s
Brasilia, Montevideo
Fernando de Noronha
Azores, Cape Verde Is.
+09:00
+09:30
10UꢁS
Maintenance and
precautions
1
2
3
*
*
*
1080i specification
A high definition specification which utilizes
1,080 effective scanning lines and the interlace
system.
About the AVCHD format
What is the AVCHD format?
720p specification
The AVCHD format is a high definition
digital video camera format used to
record a high definition (HD) signal of
either the 1080i specification*1 or the
720p specification*2 using efficient data
compression coding technology. The
MPEG-4 AVC/H.264 format is adopted to
compress video data, and the Dolby Digital
or Linear PCM system is used to compress
audio data.
A high definition specification which utilizes
720 effective scanning lines and the progressive
system.
Data recorded in AVCHD format other than
the above mentioned cannot be played on your
camcorder.
About GPS (HDR-CX550V/XR550V)
The GPS (Global Positioning System) is a
system that calculates geographical location
from highly accurate US space satellites.
This system allows you to pinpoint your
exact location on the earth. The GPS
satellites are located in 6 orbits, 20,000 km
above the earth. The GPS system consists of
24 or more GPS satellites. A GPS receiver
receives radio signals from the satellites,
and calculates the current location of the
receiver based on the orbital information
(almanac data) and travel time of the
signals, etc.
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format. The MPEG-4 AVC/
H.264 format enables a high definition
video signal shot on a digital video camera
recorder to be recorded on 8 cm DVD
discs, hard disk drive, flash memory,
memory card, etc.
Recording and playback on your
camcorder
Determining a location is called
Based on the AVCHD format, your
“triangulating.” A GPS receiver can
determine the location’s latitude and
longitude by receiving signals from 3 or
camcorder records with the high definition
image quality (HD) mentioned below.
In addition to high definition image
quality (HD), your camcorder is capable
of recording a standard definition (STD)
signal in the conventional MPEG-2 format.
more satellites.
As the positions of GPS satellites vary
constantly, it may take longer to determine
the location or the receiver may not be able to
determine the location at all, depending on the
location and time you use the camcorder.
“GPS” is a system for determining geographic
location by triangulating radio signals from
GPS satellites. Avoid using the camcorder
in places where radio signals are blocked or
reflected, such as a shadowy place surrounded
by buildings or trees, etc. Use the camcorder in
open sky environments.
Video signal*3: MPEG-4 AVC/H.264 1920
1080/60i, 1440 1080/60i
Audio signal: Dolby Digital 2ch/5.1ch
Recording media:
HDR-CX550/CX550V: Internal memory,
memory card
HDR-XR550/XR550V: Internal hard disk,
memory card
US
109
You may not be able to record location
information at locations or in situations where
radio signals from the GPS satellites do not
reach the camcorder as follows.
In tunnels, indoors or under the shade of
buildings.
Between tall buildings or at narrow streets
surrounded by buildings.
In underground locations, locations
surrounded by dense trees, under an elevated
bridge, or in locations where magnetic fields
are generated, such as near high voltage
cables.
On the restriction of use of GPS on an
airplane
During take off and landing of an airplane,
set the GPS switch to OFF and turn off the
camcorder, as you will be instructed to do by
the on-board announcement. In other cases, use
GPS in accordance with the regulations of the
place or situation.
On the map data
The camcorder contains map data for the
following countries/regions. Europe, Japan,
North America, Oceania, etc.
Built-in map is powered by companies as
follows; Map of Japan by Zenrin Co., Ltd., other
areas by NAVTEQ.
Near devices that generate radio signals of the
same frequency band as the camcorder: near
1.5 GHz band mobile telephones, etc.
The map data included is as of the date of
production of this manual.
GPS maps will appear in 2-dimensional
graphics except for certain landmarks in Japan,
which will appear in 3D.
The map always displays the north at the top.
You cannot change the language on the map.
You cannot update the map data
On triangulating errors
If you move to another location right after
setting the GPS switch to ON, it may take
a longer time for the camcorder to start
trianguating, compared to when you stay in the
same place.
Error caused by the position of GPS satellites
The camcorder automatically triangulates your
current location when the camcorder receives
radio signals from 3 or more GPS satellites. The
triangulating error allowed by the GPS satellites
is about 30 m (98 feet). Depending on the
environment of the location, the triangulating
error can be greater. In this case, your actual
location may not match the location on the map
based on the GPS information. Meanwhile,
the GPS satellites are controlled by the United
States Department of Defense, and the degree of
accuracy may be changed intentionally.
Error during the triangulating process
The camcorder acquires location information
every 10 seconds during triangulating. There
is a slight time difference between when the
location information is acquired and when the
location information is recorded on an image,
therefore, the actual recording location may not
match exactly the location on the map based on
the GPS information.
The scale of the map is 100 feet to 6,000 miles.
On the geographic coordinate system
The “WGS-84” geographic coordinate system
is used.
On copyright
The map data of the camcorder is copyrighted.
Unauthorized copying or other usage of the
map data may be contrary to the copyright laws.
On the navigation function
The camcorder does not have a navigation
function that uses GPS.
Australia
Copyright. Based on data provided under
license from PSMA Australia Limited (www.
psma.com.au).
Austria
© Bundesamt für Eich- und Vermessungswesen
11U0S
Croatia, Estonia, Latvia, Lithuania, Poland and
Slovenia
About the “Memory Stick”media
© EuroGeographics
France
source: Géoroute® IGN France & BD Carto®
IGN France
“Memory Stick” media are a compact,
portable IC recording medium with a large
data capacity.
You can use only “Memory Stick Duo”
media, which are about the half size of
standard “Memory Stick” media, with your
camcorder.
However, we do not guarantee the
operation of all types of “Memory Stick
Duo” media on your camcorder.
Germany
Die Grundlagendaten wurden mit
Genehmigung der zustaendigen Behoerden
entnommen.
Great Britain
Based upon Crown Copyright material.
Greece
© EuroGeographics; Copyright Geomatics Ltd.
Hungary
Copyright © 2003; Top-Map Ltd.
Italy
La Banca Dati Italiana è stata prodotta usando
quale riferimento anche cartografia numerica
ed al tratto prodotta e fornita dalla Regione
Toscana.
Types of“Memory Stick”media
Recording/Playback
“Memory Stick Duo”
media (with MagicGate)
“Memory Stick PRO
Duo” media
“Memory Stick PRO-HG
Duo” media
*
Japan
* This product does not support 8-bit parallel
data transfer but it supports 4-bit parallel data
transfer the same as with “Memory Stick PRO
Duo” media.
This product cannot record or play data that
uses “MagicGate” technology. “MagicGate” is
a copyright protection technology that records
and transfers the contents in an encrypted
format.
“Memory Stick PRO Duo” media formatted by a
computer (Windows OS/Mac OS) does not have
guaranteed compatibility with your camcorder.
Data read/write speed may vary depending on
the combination of the “Memory Stick PRO
Duo” media and “Memory Stick PRO Duo”
media compliant product you use.
Damaged or lost data may occur in the
following cases (the data will not be
compensated for):
If you eject the “Memory Stick PRO Duo”
media, or turn off your camcorder while your
camcorder is reading or writing image files on
the “Memory Stick PRO Duo” media (while
the access lamp is lit or flashing)
Norway
Copyright © 2000; Norwegian Mapping
Authority
Portugal
Source: IgeoE – Portugal
Spain
Información geográfica propiedad del CNIG
Sweden
Based upon electronic data © National Land
Survey Sweden.
Switzerland
Topografische Grundlage: © Bundesamt für
Landestopographie.
If you use the “Memory Stick PRO Duo”
US
111
media near magnets or magnetic fields
It is recommended that you make a back-up of
important data on the hard disk of a computer.
Do not attach a label or the like on “Memory
Stick PRO Duo” media or “Memory Stick Duo”
media adaptor.
Do not touch, or allow metallic objects to come
into contact with the terminals.
Do not bend, drop or apply strong force to the
“Memory Stick PRO Duo” media.
Do not disassemble or modify the “Memory
Stick PRO Duo” media.
Do not let the “Memory Stick PRO Duo” media
get wet.
Keep the “Memory Stick PRO Duo” media out
of the reach of small children. There is danger
that a child might swallow it.
Do not insert anything other than “Memory
Stick PRO Duo” media into the “Memory
Stick Duo” media slot. Doing so may cause a
malfunction.
in the correct direction. If inserted in the wrong
direction, the device may be damaged.
Do not insert “Memory Stick Duo” media
adaptor without “Memory Stick PRO Duo”
media attached into “Memory Stick” media
compliant device. Doing so may result in
malfunctions of the device.
On image data compatibility
Image data files recorded on “Memory Stick
PRO Duo” media by your camcorder conform
to the “Design rule for Camera File system”
universal standard established by the JEITA
(Japan Electronics and Information Technology
Industries Association).
On your camcorder, you cannot play back
photos recorded on other devices (DCR-
TRV900 or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
If you cannot use “Memory Stick PRO Duo”
media that have been used with another device,
that formatting erases all information on the
“Memory Stick PRO Duo” media.
Do not use or keep the “Memory Stick PRO
Duo” media in the following locations:
Places subject to extremely high temperature,
such as a car parked outside in the summer
Places under direct sunlight
Places with extremely high humidity or
subject to corrosive gases
You may not be able to play back images with
your camcorder:
When playing back image data modified on
your computer
When playing back image data recorded with
other devices
On the “Memory Stick Duo”media
adaptor
When using “Memory Stick PRO Duo” media
with “Memory Stick” media compliant device,
be sure to insert the “Memory Stick PRO Duo”
media into “Memory Stick Duo” media adaptor.
When using “Memory Stick PRO Duo” media
with “Memory Stick” media compliant device
inserting “Memory Stick PRO Duo” media
into “Memory Stick Duo” media adaptor, make
sure the “Memory Stick PRO Duo” media are
inserted facing in the correct direction. Note
that improper use may cause a malfunction.
When using “Memory Stick PRO Duo” media
inserted into “Memory Stick Duo” media
About the “InfoLITHIUM”battery
pack
Your camcorder operates only with an
“InfoLITHIUM” V series battery packs.
“InfoLITHIUM” V series battery packs
have the
mark.
What is an “InfoLITHIUM”battery pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your camcorder
and an AC Adaptor/charger (sold separately).
adaptor on “Memory Stick” media compliant
device, make sure the “Memory Stick PRO
Duo” media adaptor is inserted into the device
11U2S
The “InfoLITHIUM” battery pack calculates the
power consumption according to the operating
conditions of your camcorder, and displays the
remaining battery time in minutes.
The battery pack NP-FV50 is compatible with
“ActiFORCE.”
recordings before making the actual recording.
Do not expose the battery pack to water. The
battery pack is not water resistant.
About the remaining battery time
indicator
“ActiFORCE” is a new generation power
system. Battery capacity, boost charge, and
the speed and accuracy of battery time
remaining calculations have been improved
when compared with current “InfoLITHIUM”
P-series battery.
When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for
a long time, or if left in a fully charged state,
or when the battery pack is frequently used.
Use the remaining battery time indication as a
rough guide only.
To charge the battery pack
Be sure to charge the battery pack before you
start using your camcorder.
We recommend charging the battery pack in an
ambient temperature of between 10 C to 30 C
(50 °F to 86 °F) until the /CHG (flash/charge)
lamp turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
The mark that indicates low battery flashes
even if there are still 20 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
To use the battery pack effectively
If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
Battery pack performance decreases when the
ambient temperature is 10 C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one
of the following to use the battery pack for a
longer time.
To discharge the battery pack on your
Put the battery pack in a pocket to warm it
up, and install it on your camcorder right
before you start taking shots.
Use a large capacity battery pack: NP-FV70/
NP-FV100 (sold separately).
Frequent use of the LCD screen or a frequent
playback, fast forward or reverse operation
wears out the battery pack faster. We
recommend using a large capacity battery pack:
NP-FV70/NP-FV100 (sold separately).
Be sure to close the LCD screen when not
recording or playing back on your camcorder.
The battery pack is also consumed when your
camcorder is in recording standby or playback
pause.
camcorder completely, touch
[Show others] [POWER SETTINGS]
(under [GENERAL SET] category)
[A.SHUT OFF] [NEVER], and leave your
camcorder in recording standby until the power
goes off (p. 89).
(MENU)
About battery life
Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
Each battery’s life is governed by storage,
operating and environmental conditions.
Have spare battery packs ready for 2 or 3 times
the expected recording time, and make trial
US
11ꢀ
Avoid rough handling, disassembling,
modifying, physical shock, or impact such
as hammering, dropping or stepping on the
product. Be particularly careful of the lens.
Keep the LCD screen closed when you are not
using your camcorder.
Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
About x.v.Color
x.v.Color is a more familiar term for the xvYCC
standard proposed by Sony, and is a trademark
of Sony.
xvYCC is an international standard for color
space in video. This standard can express a
wider color range than the currently used
broadcast standard.
When disconnecting the power cord (mains
lead), pull it by the plug and not the cord.
Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
Do not use a deformed or damaged battery
pack.
About handling of your camcorder
On use and care
Do not use or store the camcorder and
accessories in the following locations:
Anywhere extremely hot, cold or humid.
Never leave them exposed to temperatures
above 60 C (140 °F), such as under direct
sunlight, near heaters or in a car parked in
the sun. They may malfunction or become
deformed.
Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The
camcorder may not be able to record properly.
Near AM receivers and video equipment.
Noise may occur.
Keep metal contacts clean.
If the battery electrolytic liquid has leaked:
Consult your local authorized Sony service
facility.
Wash off any liquid that may have contacted
your skin.
If any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
When not using your camcorder for a
long time
To keep your camcorder in optimum state for a
long time, turn it on and let it run by recording
and playing back images about once a month.
Use up the battery pack completely before
storing it.
On a sandy beach or anywhere dusty. If
sand or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
Near windows or outdoors, where the LCD
screen, the viewfinder or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories
recommended in these operating instructions.
Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder
gets wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
Moisture condensation
If your camcorder is brought directly from a cold
place to a warm place, moisture may condense
inside your camcorder. This may cause a
malfunction to your camcorder.
If moisture condensation has occurred
Leave your camcorder for about 1 hour without
turning it on.
Note on moisture condensation
Moisture may condense when you bring your
camcorder from a cold place into a warm place
(or vice versa) or when you use your camcorder
in a humid place as follows:
You bring your camcorder from a ski slope
into a place warmed up by a heating device.
If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
11U4S
You bring your camcorder from an air
conditioned car or room into a hot place
outside.
You use your camcorder after a squall or a
shower.
You use your camcorder in a hot and humid
place.
Touch “” displayed on the screen with the
corner of memory card or the like 3 times.
Touch [CANCEL] to cancel calibration.
How to prevent moisture condensation
When you bring your camcorder from a cold
place into a warm place, put your camcorder in
a plastic bag and seal it tightly. Remove the bag
when the air temperature inside the plastic bag
has reached the surrounding temperature (after
about 1 hour).
Notes
If you did not press the right spot, try the
calibration again.
Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
You cannot calibrate the LCD screen if it is
rotated, or closed with the screen facing out.
LCD screen
Do not exert excessive pressure on the LCD
screen, as it may cause uneven color and other
damage.
If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
While using your camcorder, the back of
the LCD screen may heat up. This is not a
malfunction.
On handling the casing
If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the
finish:
Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen
Handling the camcorder with above
substances on your hands
To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, it is recommended that you use a soft
cloth to clean it.
When you use the LCD Cleaning Kit (sold
separately), do not apply the cleaning liquid
directly to the LCD screen. Use cleaning paper
moistened with the liquid.
Leaving the casing in contact with rubber or
vinyl objects for a long period of time
About care and storage of the lens
Wipe the surface of the lens clean with a soft
cloth in the following instances:
When there are fingerprints on the lens
surface
In hot or humid locations
When the lens is exposed to salty air such as
at the seaside
Store in a well-ventilated location subject to
little dirt or dust.
To prevent mold, periodically clean the lens as
described above.
On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not work
correctly. If this happens, follow the procedure
below. It is recommended that you connect your
camcorder to the wall outlet (wall socket) using
the supplied AC Adaptor during the operation.
(MENU) [Show others]
[OTHER SETTINGS] (under
[GENERAL
SET] category) [CALIBRATION].
US
115
On charging the pre-installed
rechargeable battery
On trademarks
“Handycam” and
are
registered trademarks of Sony Corporation.
“AVCHD” and “AVCHD” logotype are
trademarks of Panasonic Corporation and Sony
Corporation.
Your camcorder has a pre-installed rechargeable
battery to retain the date, time, and other settings
even when the LCD screen is closed. The pre-
installed rechargeable battery is always charged
while your camcorder is connected to the wall
outlet (wall socket) via the AC Adaptor or while
the battery pack is attached. The rechargeable
battery will be fully discharged in about 3 months
if you do not use your camcorder at all. Use
your camcorder after charging the pre-installed
rechargeable battery.
“Memory Stick,” “
,” “Memory Stick Duo,”
,” “Memory Stick PRO
,” “Memory
“
Duo,” “
Stick PRO-HG Duo,”
“
“
,” “MagicGate,”
,” “MagicGate Memory
Stick” and “MagicGate Memory Stick Duo” are
trademarks or registered trademarks of Sony
Corporation.
However, even if the pre-installed rechargeable
battery is not charged, the camcorder operation
will not be affected as long as you are not
recording the date.
“InfoLITHIUM” is a trademark of Sony
Corporation.
“x.v.Color” is a trademark of Sony Corporation.
“BIONZ” is a trademark of Sony Corporation.
“BRAVIA” is a trademark of Sony Corporation.
“DVDirect” is a trademark of Sony
Corporation.
“Blu-ray Disc” and the logo are trademarks.
Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licencing LLC.
Microsoft, Windows, Windows Vista, and
DirectX are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
Intel, Intel Core, and Pentium are trademarks
or registered trademarks of Intel Corporation
or its subsidiaries in the United States and other
countries.
“PlayStation” is a registered trademark of Sony
Computer Entertainment Inc..
How to charge the pre-installed
rechargeable battery
Connect your camcorder to a wall outlet (wall
socket) using the supplied AC Adaptor, and leave
it with the LCD screen closed for more than 24
hours.
Note on disposal/transfer
Even if you delete all movies and still images, or
internal recording media may not be completely
erased. When you transfer the camcorder, it is
recommended that you perform [EMPTY] (p. 85)
to prevent the recovery of your data. Also, when
you dispose of the camcorder, it is recommended
that you destroy the actual body of the camcorder.
Note on disposal/transfer of the
memory card
Even if you delete data in the memory card or
format the memory card on your camcorder or
a computer, you may not delete data from the
memory card completely. When you give the
memory card to somebody, it is recommended
that you delete date completely using data
deletion software on a computer. Also, when you
dispose of the memory card, it is recommended
that you destroy the actual body of the memory
card.
Adobe, the Adobe logo, and Adobe Acrobat
are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United
States and/or other countries.
NAVTEQ and the NAVTEQ Maps logo are
trademarks of NAVTEQ in the US and other
countries.
11U6S
SDHC logo is a trademark.
Notes on the License
ANY USE OF THIS PRODUCT OTHER
THAN CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING VIDEO
INFORMATION FOR PACKAGED MEDIA
IS EXPRESSLY PROHIBITED WITHOUT A
LICENSE UNDER APPLICABLE PATENTS IN
THE MPEG-2 PATENT PORTFOLIO, WHICH
LICENSE IS AVAILABLE FROM MPEG LA,
L.L.C., 250 STEELE STREET, SUITE 300,
DENVER, COLORADO 80206.
MultiMediaCard is a trademark of
MultiMediaCard Association.
All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore,
and are not mentioned in each case in this
Handbook.
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE
OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE
WITH THE AVC STANDARD (“AVC VIDEO”)
AND/OR
(ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE <HTTP://MPEGLA.COM>
“C Library,” “Expat,” “zlib,” “libjpeg,” “dtoa,” and
“pcre” software are provided in your camcorder.
We provide this software based on license
agreements with their owners of copyright. Based
on requests by the owners of copyright of these
software applications, we have an obligation
to inform you of the following. Please read the
following sections.
Read “license1.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“C Library,” “Expat,” “zlib,” “libjpeg,” “dtoa,” and
“pcre” software.
US
117
On GNU GPL/LGPL applied software
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. Use
the following URL to download it. When
downloading the source code, select DCR-SX43
as the model for your camcorder.
http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“GPL,” and “LGPL” software.
To view the PDF, Adobe Reader is needed. If
it is not installed on your computer, you can
download it from the Adobe Systems web page:
http://www.adobe.com/
11UꢁS
Quick reference
Screen indicators
Upper right
Upper left
Center
Upper right
Indicator
Meaning
Recording image quality
(HD/STD) and recording
mode (FX/FH/HQ/LP)
Recording/playback/
editing media (18)
Counter (hour:minute:
second) (34)
Estimated recording
remaining time (22)
0:00:00
Bottom
[00min]
Upper left
Indicator
Meaning
FADER (71)
MENU button (66)
Approximate number of
recordable photos and
recording media (24)
9999
9999
9999
AUDIO MODE (79)
Self-timer recording (80)
GPS tracking status (53)
Flash (81)/
REDEYE REDUC (81)
MICREF LEVEL low (78)
WIDE SELECT (80)
BLT-IN ZOOM MIC (78)
Remaining battery
Recording folder
Return button (66)
Playback folder (35)
Current playing movie or
photo/Number of total
recorded movies or photos
100/112
Bottom
Indicator
Meaning
60 min
[FACE DETECTION] set
to [OFF] (77)
SMILE DETECTION (78)
LOW LUX (77)
Center
Indicator
Manual focus (74)
Meaning
[STBY]/[REC]
Recording status (22)
SCENE SELECTION (71)
Photo size (80)
White balance (72)
SteadyShot off (77)
SPOT METER (73)/
EXPOSURE (73)
AE SHIFT (74)
WB SHIFT (75)
TELE MACRO (74)
SHUTTER SPEED (31)
Slide show set (40)
NightShot (30)
Warning (98)
Playback mode (34)
Drop sensor off (90)
Drop sensor activated (90)
US
119
Parts and controls
Figures in ( ) are reference pages.
Indicator
Meaning
CONVERSION LENS (77)
HDR-CX550/CX550V
INTELLIGENT AUTO
OPTION button (68)
VIEW IMAGES button
Slide show button (40)
YOUR
LOCATION button (54)
Data file name (35)
Protected image (45)
Index button (35)
101-0005
Indicators and their positions are approximate
and may differ from what you actually see.
Some indicators may not appear, depending on
your camcorder model.
HDR-XR550/XR550V
Active Interface Shoe
The Active Interface Shoe supplies power to
accessories such as a video light, a flash, or a
microphone (sold separately). The accessory
can be turned on or off as you open or close
the LCD screen of your camcorder. Refer to
12U0S
the operating instructions supplied with your
accessory for details.
The Active Interface Shoe has a safety device
for fixing the installed accessory securely. To
connect an accessory, press down and push
it to the end, and then tighten the screw. To
remove an accessory, loosen the screw, and
then press down and pull out the accessory.
When you open or close the shoe cover,
slide it as indicated by the arrow.
When you are recording movies with an
external flash (sold separately) connected
to the accessory shoe, turn off the power of
the external flash to prevent charging noise
being recorded.
You cannot use an external flash (sold
separately) and the built-in flash at the same
time.
LCD screen/Touch panel (15, 31)
If you rotate the LCD panel 180 degrees, you
can close the LCD panel with the LCD screen
facing out. This is convenient during playback
operations.
When an external microphone (sold
separately) is connected, it takes precedence
over the built-in microphone (p. 29).
HDR-CX550/CX550V
Built-in microphone (29)
Flash
Lens (G lens)
MIC (PLUG IN POWER) jack
(headphones) jack
Remote sensor/Infrared port
Point the Wireless Remote Commander
your camcorder.
HDR-XR550/XR550V
Camera recording lamp (90)
The camera recording lamp lights up in red
during recording. The lamp flashes when the
remaining recording media capacity or battery
power is low.
MANUAL button (31)
MANUAL dial (31)
(VIEW IMAGES) button (33)
(DISC BURN) button (see Operating
Guide)
NIGHTSHOT button (30)
US
121
HDR-XR550/XR550V
(INTELLIGENT AUTO) button (26)
POWER button (15)
RESET button
Press RESET using a pointed object.
Press RESET to initialize all the settings
including the clock setting.
GPS switch (HDR-CX550V/XR550V) (53)
Speaker
MODE button (21)
(Movie)/ (Photo) lamps (21)
HDR-CX550/CX550V
Eyecup
Viewfinder lens adjustment lever (23)
Battery pack (12)
A/V Remote Connector (41)
PHOTO button (24)
Power zoom lever (26, 39)
/CHG (flash/charge) lamp (12)
START/STOP button (22)
Hook for a shoulder belt
Tripod receptacle
Attach a tripod (sold separately) to the
tripod receptacle using a tripod screw (sold
separately: the length of the screw must be less
than 5.5 mm (7/32 in.)).
Memory card slot (20)
Memory card Access lamp (20)
While the lamp is lit or flashing, the
camcorder is reading or writing data.
BATT (battery) release lever (14)
12U2S
////ENTER buttons
When you press any of these buttons, the
orange frame appears on the LCD screen.
Select a desired button or an item with
///, then press ENTER to enter.
Wireless Remote Commander
Notes
Remove the insulation sheet before using the
Wireless Remote Commander.
Insulation sheet
Point the Wireless Remote Commander
towards the remote sensor to operate your
camcorder (p. 121).
When no commands have been sent from the
Wireless Remote Commander within a certain
period, the orange frame disappears. When
you press any of ///, or ENTER again,
the frame appears at the position where it was
displayed last.
DATA CODE button (82)
Displays the date and time, camera setting
data, or coordinates (HDR-CX550V/XR550V)
of the recorded images when you press this
button during playback.
You cannot select some buttons on the LCD
screen using ///.
PHOTO button (24)
The on-screen image when you press this
button will be recorded as a still image.
SCAN/SLOW buttons (34)
PLAY button
STOP button
DISPLAY button (22)
Transmitter
START/STOP button (22)
Power zoom buttons
PAUSE button
VISUAL INDEX button (34)
Displays a VISUAL INDEX screen during
playback.
US
12ꢀ
To change the battery of the Wireless
Remote Commander
While pressing on the tab, inset your fingernail
into the slit to pull out the battery case.
Place a new battery with the + side facing up.
Insert the battery case back into the Wireless
Remote Commander until it clicks.
Tab
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
When the lithium battery becomes weak, the
operating distance of the Wireless Remote
Commander may shorten, or the Wireless
Remote Commander may not function
properly. In this case, replace the battery with
a Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
12U4S
Index
Creating a disc ............................59
CTRL FOR HDMI......................90
Symbols
G
16:9 ...............................................87
4:3 .................................................87
5.1ch surround recording..........29
GENERAL SET...........................86
GOLF SHOT ...............................75
GPS...............................................52
GUIDEFRAME...........................76
D
DATA CODE ..............................16
DATE/TIME................................16
Date Index ...................................36
DELETE.......................................44
DIAL SETTING..........................31
DIGITAL ZOOM .......................79
Disc recorder...............................64
DISPLAY SET .............................87
DISP OUTPUT...........................88
DIVIDE........................................46
DOWNLOAD MUSIC ..............39
DROP SENSOR ..........................90
Dual Rec ......................................30
DVDirect Express.......................60
DVD writer............................60, 63
H
A
HD/STD SET ..............................27
HIGHLIGHT ..............................37
A.SHUT OFF ..............................89
A/V connecting cable...........42, 64
Abroad .......................................107
AUDIO MODE...........................79
AUDIO REC SET .......................78
AUTO AREA ADJ......................56
AUTO BACK LIGHT ................79
AUTO CLOCK ADJ...................56
AVCHD format.........................109
I
Image quality...............................27
INDOOR .....................................72
“InfoLITHIUM” battery
pack ............................................112
INTELLIGENT AUTO........26, 98
B
L
BATTERY INFO.........................84
Battery of the Wireless Remote
Battery pack.................................12
BEACH ........................................71
BEEP.............................................86
BLACK FADER ..........................72
BLT-IN ZOOM MIC..................78
LANDSCAPE..............................71
LCD BL LEVEL ..........................86
LCD BRIGHT .............................86
LCD COLOR...............................87
LOW LUX....................................77
LP..................................................28
E
EMPTY MUSIC..........................39
External media............................57
F
FACE DETECTION.............77, 98
Face Index....................................37
FH.................................................28
FILE NO.......................................82
Film Roll Index ...........................36
FIREWORKS ..............................71
FLASH LEVEL............................81
FLASH MODE............................81
FOCUS.........................................74
Format..........................................85
Fully charged...............................12
FX .................................................28
M
Maintenance..............................109
MANUAL dial.............................31
Map Index....................................54
MEDIA INFO .............................85
MEDIA SETTINGS....................18
Memory card...............................19
“Memory Stick” media...... 19, 111
C
CAMERA DATA ........................83
Capturing a photo from
a movie.........................................47
Charging the battery pack
abroad ................................. 14, 107
CLOCK/LANG...........................88
CLOCK SET................................15
CONVERSION LENS................77
COORDINATES.........................55
“Memory Stick PRO-HG Duo”
media................................... 19, 111
“Memory Stick PRO Duo”
media................................... 19, 111
US
125
Menus.....................................66, 69
Mirror mode ...............................31
Moisture condensation ............114
MOVIE DUB ..............................48
MOVIE MEDIA SET .................18
Movies....................................22, 34
MUSIC TOOL ......................39, 84
R
T
REC LAMP..................................90
REC MODE.................................28
Recording ....................................21
Recording and playback
time.............................................103
Recording media.........................18
Recording time of movies/
number of recordable photos..103
REDEYE REDUC.......................81
REMOTE CTRL .........................90
Repair...........................................91
TELE MACRO............................74
Tripod.........................................122
Troubleshooting..........................91
TV.................................................41
N
NightShot.....................................30
NIGHTSHOT LIGHT ...............79
NTSC..........................................107
U
S
USB cable...............................60, 63
USB CONNECT.........................63
O
Saving images in external
media............................................57
ONE PUSH .................................72
Operation flow..............................6
OPTION MENU ........................68
Original........................................48
OTHER REC SET.......................79
OTHERS......................................84
OUTDOOR.................................72
SCENARIO..................................38
SCENARIO ERASE....................38
SCENE SELECTION ...........71, 98
Screen indicators ......................119
Self-diagnosis display/Warning
V
VBR ............................................104
VIEW IMAGES ..........................36
VISUAL INDEX .........................33
SELF-TIMER...............................80
Setting the date and time...........15
SHOOTING SET........................76
SMILE DETECTION...........78, 98
SMILE SENSITIVITY..........78, 98
SNOW..........................................71
SOUND/DISP SET.....................86
SPOT FOCUS .............................73
SPOT METER.............................73
STEADYSHOT .....................77, 81
SUMMERTIME..........................89
SUNRISE&SUNSET...................71
Supplied items...............................2
W
WB SHIFT...................................75
WHITE BAL. ..............................72
WHITE FADER..........................72
Wide angle...................................26
P
PB zoom.......................................39
PHOTO COPY ...........................49
PHOTO MEDIA SET ................18
Photos ....................................24, 35
PHOTO SETTINGS...................80
PLAYBACK SET.........................82
Playing..........................................33
Playlist..........................................50
PLAYLIST EDIT.........................50
PORTRAIT..................................71
POWER SETTINGS ..................89
PROTECT ...................................45
X
x.v.Color.............................. 79, 114
Y
YOUR LOCATION....................54
Z
Zoom......................................26, 39
12U6S
Additional information on this product and
answers to frequently asked questions can
be found at our Customer Support Website.
http://www.sony.net/
|