3-098-549-11(1)
Digital Video Camera Recorder
Operating Guide
DCR-SR32E/SR42E/SR52E/SR62E/SR72E/SR82E/
SR190E/SR200E/SR290E/SR300E
For details on the advanced operations, please refer
to “Handycam Handbook” (PDF).
© 2007 Sony Corporation
Notes on use
• The camcorderis not dustproofed, dripproofed or
• To prevent the hard disk from being broken or
recorded images from being lost, do not do the
following when either of the respective lamps of
Note on operational temperatures
• When the temperature of the camcorder becomes
extremely high or extremely low, you may not be
able to record or play back on the camcorder, due
to the protection features of the camcorder being
activated in such situations. In this case, an
–to remove the battery pack orAC Adaptor from
the camcorder.
–to apply mechanical shock or vibration to the
camcorder.
When the camcorder is connected to a
computer
• Donottrytoformattheharddiskofthecamcorder
using a computer. If you do so, your camcorder
may not operate correctly.
On recording
• Before starting to record, test the recording
function to make sure the image and sound are
recorded without any problems.
• Compensation for the contents of recordings
cannot beprovided, even if recording or playback
is not possible due to a malfunction of the
camcorder, recording media, etc.
• TV color systems differ depending on the
countries/regions. To view your recordings on a
TV, you need a PAL system-based TV.
Note on using the camcorder at high
altitudes
• Do not turn on the camcorder in a low-pressure
area, where the altitude ismore than 3,000 meters
(9,800 feet). Doing so may damage the hard disk
drive of your camcorder.
• Televisionprograms,films,videotapes,andother
materials may be copyrighted. Unauthorized
recording of such materials may be contrary to
the copyright laws.
Note on disposal/transfer
• Ifyouperform[
FORMAT]*orformattingthe
hard disk of the camcorder, you may not delete
data from the hard disk completely. When you
transfer the camcorder, it is recommended that
Save all your recorded image data
you perform [
EMPTY]* to prevent the
• To prevent your image data from being lost, save
all your recorded images on external media. It is
recommended that you save the image data on a
disc such as DVD-R using your computer*. Also,
you can save your image data using a VCR, or a
DVD/HDD recorder*.
recovery of your data.
In addition to the above, when you dispose of the
camcorder, it is recommended that you destroy
the actual body of the camcorder.
About language setting
• It is recommended that you save your image data
periodically, after recording.
• The on-screen displays in each local language are
used for illustrating the operating procedures.
Change the screen language before using your
Do not apply shock or vibration to your
camcorder
• The hard disk of the camcorder may not be
recognized, or recording or playback may not be
possible.
About this manual
• The LCD screens and indicators shown in this
manual were taken with a digital still camera, and
may look different from what you actually see.
• Design and specificationsofrecordingmediaand
other accessories are subject to change without
notice.
• Unlessotherwisespeciallyindicated,illustrations
in this manual are based on DCR-SR300E.
On the drop sensor
• To protect the internal hard disk from the shock
by dropping, the camcorder has the drop sensor
function*. When a drop occurs, or under a non-
gravity condition, the block noise to protect the
camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/play
back may be stopped.
• The screenshots are from Windows XP. The
scenes may vary depending on the operating
system of the computer.
*
Refer to “Handycam Handbook” (PDF).
3
Table of Contents
Read this first............................................................................................2
Getting Started
Recording/Playback
Playback .................................................................................................13
HOME” and “
OPTION” .............. 24
Troubleshooting
Additional Information
Precautions.............................................................................................30
Specifications..........................................................................................31
4
Step 1: Checking supplied items
Wireless Remote Commander (1)
(except for DCR-SR32E/SR42E)
Make sure that you have the following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
A button-type lithium battery is already installed.
Rechargeable battery pack
SR52E/SR62E/SR72E/SR82E)
SR290E/SR300E)
21-pin adaptor (1)
For the models with the
bottom surfaces only.
mark printed on their
CD-ROM “Handycam Application
Software” (1) (p.22)
– Picture Motion Browser (Software)
USB cable (1) (p.23)
– Handycam Handbook (PDF)
“Operating Guide” (This manual) (1)
5
On the Remote Commander
(except for DCR-SR32E/SR42E)
Using the Remote Commander for the
first time
Remove the insulation sheet before using the
Remote Commander.
Insulation sheet
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing up.
3 Insert the battery case back into the Remote
Commander until it clicks.
Tab
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may not
function properly. In this case, replace the battery
with a Sony CR2025 lithium battery. Use of
another battery may present a risk of fire or
explosion.
6
Step 2: Charging the battery pack
POWER
switch
Battery pack
CHG
lamp
DC IN jack
DC plug
AC Adaptor
To the
wall socket
Mains lead
You can charge the “InfoLITHIUM”
battery pack (H series) after attaching
it to your camcorder.
• Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
5
Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged. Removethecamcorder fromthe
Handycam Station.
1
2
3
Attach the battery pack by sliding
it in the direction of the arrow until
it clicks.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
Turn the POWER switch in the
directionofthearrowtoOFF(CHG)
(The default setting).
BATT(battery)
release lever
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the v mark on the DC plug
is facing up.
4
Connect the mains lead to the AC
Adaptor and the wall socket.
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Movie) lamp/
7
NP-FH60:
(Unit:min.)
To charge the battery pack using only
the AC Adaptor
TurnthePOWERswitchtoOFF(CHG),then
connect the AC Adaptor directly to the DC
IN jack on the camcorder.
DCR-SR190E/ DCR-SR290E/
SR200E
SR300E
135
135
Charging time
Recording time*1
Continuous
recording time
115*2
100*2
125*3
105*3
POWER
switch
Typical
recordingtime
55*2
60*3
50*2
50*3
4
*
Playback time*2
DC plug
165
160
DC IN jack
Openthejack
cover
*1 When [REC MODE] is set to [SP].
*2 When the LCD backlight turns on.
*3When the LCD backlight turns off.
*4 Typical recording time shows the time when you
repeat recording start/stop, turning the power on/
off and zooming.
Available running time for the
supplied battery pack
On the battery pack
• Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
Charging time:
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
(Movie) lamp/
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the DC
IN jack of your camcorder or the Handycam
Station, evenwhenthemainsleadisdisconnected
from the wall socket.
Recording/Playback time:
Approximatetime(min.)availablewhenyou
use a fully charged battery pack.
On the charging/recording/playback time
NP-FH40:
(Unit:min.)
• Times measured when using the camcorder at
25°C (77°F) (10°C to 30°C (50°F to 86°F) is
recommended).
• The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
DCR-SR52E/
SR62E/
SR72E/SR82E
DCR-SR32E/
SR42E
125
125
Charging time
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Recording time*1
Continuous
recording time
90*2
105
100*3
On the AC Adaptor
• Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
Typical
recordingtime
45*2
50
50*3
4
*
120
110*2
Playback time
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
8
Step3:Turningthepoweron,andsettingthedate
and time
Touchthebuttononthe
LCD screen.
POWER switch
When using the
camcorder for the
first time, the
[CLOCK SET]
screen appears on
the LCD screen.
• The date and time does not appear during
recording, but they are automatically recorded on
the hard disc, and can be displayed during
playback.
1
While pressing the green button,
turn the POWER switch repeatedly
in the direction of the arrow until
the respective lamp lights up.
To reset the date and time
Touch
(HOME) t
(SETTINGS)t
When you record or play back an image,
turn the POWER switch in the direction
of the arrow repeatedly until the
respective lamp lights up.
[CLOCK/ LANG] t[CLOCK SET], and
set the date and time.
Changing the language setting
(Movie): To record movies
(Still): To record still images
You can change the on-screen displays to
show messages in a specified language.
• When you turn on
(Still) lamp, the screen
aspect ratio is changed to 4:3 automatically.
Touch
(HOME)t
(SETTINGS)t
[CLOCK/ LANG] t [ LANGUAGE
SET], then select the desired language.
2
3
Select the desired geographical
area with v/V, then touch [NEXT].
Set [SUMMERTIME], [Y] (year), [M]
(month), [D] (day), hour and
minute.
The clock starts.
9
Step 4: Preparing for recording
2 180 degrees (max.)
POWER
switch
1 90 degrees
to the
camcorder
2 90 degrees
(max.)
16:9 (wide)
4:3
* Except for DCR-SR32E/SR42E.
1
Adjust the LCD panel.
4
Fasten the grip belt and hold your
camcorder correctly.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
2
3
Turn the POWER switch to turn on
your camcorder.
Press WIDE SELECT repeatedly to
select the desired screen aspect
ratio (except for DCR-SR32E/
SR42E).
10
Recording
Lens cover switch
(DCR-SR32E/SR42E/
SR52E/SR62E/
SR72E/SR82E)
START/STOP A
[STBY] t [REC]
POWER switch
PHOTO
START/STOP B
Flashing t Lights up
EASY button
1
2
Slide the lens cover switchtoopen(DCR-SR32E/SR42E/SR52E/SR62E/SR72E/
SR82E).
• For DCR-SR190E/SR200E/SR290E/SR300E, the lens cover opens and closes automatically.
Turn the POWER switch until the respective lamp lights up.
Press the green button only when the POWER switch is in the OFF (CHG) position.
•
•
(Movie): To record movies
(Still): To record still images
3
Start recording.
Movies
Still Images
Press PHOTO lightly to adjust the
focus A (a beep sounds), then press
it fully B (a shutter click sounds).
Press START/STOP A (or B).
To stop recording, press START/STOP
again.
When
disappears, the image has been
recorded.
• Still images are recorded on the hard disk in the
default setting.
11
• You can check the free hard disk space by
touching (HOME) t (MANAGE
HDD/MEMORY) t [ INFO].
• If the ACCESS lamp is lit or flashing after
recording is finished, it means data is still being
written onto the hard disk or “Memory Stick
Duo.” Do not apply shock or vibration to your
camcorder, and do not remove the battery or AC
Adaptor.
• When the ACCESS lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
orknockyourcamcorder, turnthepoweroff,eject
the “Memory Stick Duo,” or remove the battery
pack. Otherwise, image data may be damaged.
• Ifyouinsert the“Memory StickDuo”into theslot
in the wrong direction, the “Memory Stick Duo,”
the “Memory Stick Duo” slot, or image data may
be damaged.
• You can capture up to 3 still images by pressing
PHOTO during movie recording (DCR-SR190E/
SR200E/SR290E/SR300E).
• The maximum continuous recordable time is
approximately 13 hours.
• The numbers of recordable still images on the
“Memory Stick Duo” (1GB)are followings (with
the default setting of the image size as shown in
( ));
DCR-SR32E/SR42E: 5,900 ([VGA (0.3M)])
• When a movie file exceeds 2 GB, the next movie
file is created automatically.
DCR-SR52E/SR62E/SR72E/SR82E: 1,800
([1.0M])
• The maximum recordable time are followings
(with recording mode [SP]);
DCR-SR190E/SR200E: 480 ([4.0M])
DCR-SR290E/SR300E: 315 ([6.1M])
DCR-SR32E/SR42E/SR52E/SR62E:
approx. 10 hours and 50 minutes
DCR-SR72E/SR82E:
• All numbers measured when using a “Memory
Stick Duo” made by Sony Corporation. The
numberofrecordableimagesvariesdependingon
the recording environment.
approx. 21 hours and 40 minutes
DCR-SR190E/SR200E/SR290E/SR300E:
approx. 14 hours and 30 minutes
• The number of recordable images varies
depending on the image quality or the image size.
For details, see “Handycam Handbook” (PDF).
To record still images on a “Memory
Stick Duo”
You can change the recording media of still
images to a “Memory Stick Duo.”
x To change the recording media of
still images
1 Touch
(OPTION) t
tab t
[STILL MEDIA].
2 Select the media in which you want to
save still images, then touch
You can use only a “Memory Stick Duo”
marked with
or
.
.
Your camcorder returns to recording
standby mode.
x Inserting/ejecting a “Memory Stick
Duo”
On Easy Handycam operation
By pressing the EASY button, nearly all
settings on the camcorder will be
automatically operated so that you can
perform recording or playing back operation
without detailed settings. During Easy
Open the LCD panel, then insert the
“Memory Stick Duo” into the Memory
Stick Duo slot in the right direction until
it clicks.
Handycam operation,
appears on the
LCD screen. To cancel Easy Handycam
operation, press EASY again.
• You cannot use some buttons/functions during
Easy Handycam operation.
ACCESS lamp
(“Memory Stick Duo”)
To eject a “Memory Stick Duo,” open the
LCD panel, lightly push the “Memory
Stick Duo” in once.
12
Playback
(VIEW IMAGES)
button B
POWER switch
(VIEW IMAGES) button A
1 Returns to the recording screen
2 Previous 6 images
6 Displays still images on the hard disk
7 Displays still images on a “Memory Stick Duo”
3 Next 6 images
8 Searches for images by date
4 Returns to the recording screen
5 Displays movies
9
(OPTION)
1
2
Turn the POWER switch to turn on your camcorder.
Press
(VIEW IMAGES) A (or B) button.
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to display
the thumbnails.)
3
Start playback.
Movies
Touch the
Still Images
tab, and the movie to
Touch the
, or
tab, and the still
be played back.
image to be played back.
Toggles Play
orPauseasyou
touch
Beginning of the
scene/previous
scene
Slide show button
Next
scene
Go to the VISUAL
INDEX screen
Previous/
Next
Stop(gototheVISUAL
INDEX screen)
Reverse/Forward
13
To adjust the sound volume of movies
When playing back a movie, touch
(OPTION)t
tabt[VOLUME],then
adjust the volume with
/
.
• When playback from the selected movie reaches
the last movie, the screen returns to the VISUAL
INDEX screen.
• Touch
/
during pause to play back
movie slowly.
• One touch of
/
makes the reverse/fast
forward approximately 5 times faster, 2 touches
makes it approximately 10 times faster, 3 touches
makes it approximately 30 times faster, and 4
touches makes it approximately 60 times faster.
• iappears with the image on each of the tab that
was lastly played back/recorded (B for the still
image)lasttime.Whenyoutouchamoviemarked
with i, you can play it back from the point you
have stopped previously.
14
Parts and functions used for the camcorder
DCR-SR32E/SR42E/SR52E/
SR62E/SR72E/SR82E
DCR-SR190E/SR200E/
SR290E/SR300E
DCR-SR32E/SR42E/SR52E/
SR62E/SR72E/SR82E
DCR-SR190E/SR200E/
SR290E/SR300E
Handycam
Station
1
2 NIGHTSHOT PLUS switch*
To record in dark places, set the
Recording
NIGHTSHOT PLUS switch to ON. (
appears.)
1 Power zoom lever
To use zoom, move the power zoom lever.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
6 Built-in microphone
Records sound.
Sound picked up by the built-in microphone
is converted to 5.1ch surround sound and
2
recorded.*
15
3
7 Remote sensor*
qk Tripod receptacle (Bottom surface)
Receive the signal from the Remote
Commander.
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm (7/32 in.)) to
the tripod receptacle using a tripod screw.
2
8 Flash*
ql RESET button
Flashes when using the flash.
To initialize the settings (Reset), press
RESETtoinitialize allthesettings,including
settings for date and time.
9 LCD screen
To record in mirror mode, open the LCD
screen90degreestothecamcorder(1),then
rotate it 180 degrees to the lens side (2).
Playback
1 Power zoom lever
q; Zoom buttons
You can magnify still images from about 1.1
to 5 times the original size (Playback zoom).
• When you touch the screen during playback
zoom, the point you touched will be displayed in
the center of the displayed frame.
q; Zoom buttons
Press for zooming in/out.
qd EASY button
4
qa BACK LIGHT button*
qj Speaker
Sound comes out from the speaker while
playing back.
To adjust the exposure for backlit subjects,
press BACK LIGHT to display .. To cancel
the back light function, press BACK LIGHT
again.
Connecting to other devices
qs DISP/BATT INFO button
You can switch the screen display when you
press while the power is set to on.
WhenyoupresswhilethepowerissettoOFF
(CHG), you can check the remaining battery.
3 A/V OUT jack
Connect with the A/V connecting cable.
3
4 REMOTE jack*
Connect other optional accessories.
qd EASY button
3
5 Active Interface Shoe
*
2
The Active Interface Shoe supplies power to
optional accessories such as a video light, a
flash, or a microphone. The accessory can be
turned on or off as you operate the POWER
switch on your camcorder.
qf (flash) button*
You can select the settings for the flash.
qg Shoulder belt hook
Attach the shoulder belt (optional).
w; DC IN jack
2
qh NIGHTSHOT switch*
To record in dark places, set the
NIGHTSHOT switch to ON. (
wa Interface connector
appears.)
16
ws DISC BURN button
Create a DVD by connecting the camcorder
to a computer. For details, see “Handycam
Handbook” (PDF).
5
wd (USB) jack*
Connect with the USB cable.
*1 DCR-SR32E/SR42E/SR52E/SR62E/SR72E/
SR82E
*2 DCR-SR190E/SR200E/SR290E/SR300E
*3 Except for DCR-SR32E/SR42E
*4 For DCR-SR32E/SR42E, the position of the
buttons differ from the illustration.
*5 For DCR-SR32E/SR52E/SR72E/SR190E/
SR290E: output only.
17
Indicators displayed during recording/playback
Recording movies
Recording still images
Viewing movies
Viewing still images
1 Recording mode (HQ / SP / LP)
2 HOME button
qd Recording folder
Displaysonlyduringtherecordingmedia
of still images is a “Memory Stick Duo.”
3 Remaining battery (approx.)
qf Return button
4 Recording status ([STBY] (standby) or
qg Playback mode
[REC] (recording))
5 Counter (hour/minute/second)
qh Current movie number/Number of total
movies
6 OPTION button
qj Previous/Next button
qk Video operation buttons
ql Data file name
7 Dual Rec (DCR-SR190E/SR200E/
SR290E/SR300E)
8 VIEW IMAGES button
9 5.1ch surround recording (DCR-
w; Current still image number/Number of
SR190E/SR200E/SR290E/SR300E)
recorded still images
q; Quality ([FINE] / [STD])
wa Slide show button
ws Previous/Next button
wd Data file name
qa Image size
qs Appears while a still image is being
saved.
wf VISUAL INDEX button
18
Indicator
Meaning
Indicators when you made
changes
PictBridge connecting
E
Warning
Following indicators appear during
recording/playbacktoindicatethesettingsof
your camcorder.
Bottom
Upper left
Upper right
Indicator
Meaning
Picture effect
Digital effect
Manual focus
9
SCENE SELECTION
Bottom
Center
.
Backlight
Upper left
n
White balance
SteadyShot off
Indicator
Meaning
EXPOSURE/
SPOT METER
5.1ch surround recording/
playback*
1
TELE MACRO
Self-timer recording
1
ZEBRA*
Flash
*1 DCR-SR190E/SR200E/SR290E/SR300E
*
2 DCR-SR32E/SR42E
MICREF LEVEL low
*3 DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
2
WIDE SELECT*
SR200E/SR290E/SR300E
*4 DCR-SR32E/SR42E/SR52E/SR62E/SR72E/
3
WIDE SELECT*
SR82E
Upper right
• The recording date and time is recorded
automatically on the hard disk and “Memory
Stick Duo.” They are not displayed while
recording. However, you can check them as
[DATA CODE] during playback.
Indicator
Meaning
FADER
LCD backlight off
Drop sensor off
Drop sensor activated
Center
Indicator
Meaning
Slide show set
4
NightShot plus*
1
NightShot*
4
Super NightShot plus*
Super NightShot*
1
Color Slow Shutter
19
Saving images
Deleting images
Recorded images are stored on the internal
hard disk of your camcorder. Due to the
limited capacity of the internal hard disk,
make sure that you save the image data to
some type of external media such as a
DVD-R or a computer.
Deleting the images on the hard
disk
1
On the
(HOME MENU), touch
(OTHERS) t [DELETE].
You can save the images recorded on the
camcorder as described below.
2
3
Touch [
DELETE].
Saving images using a computer
By using the software on the supplied
CD-ROM, you can save images on a DVD or
the hard disk of a computer. For details, see
“Handycam Handbook” (PDF).
Touch [
DELETE] (movies) or
[
DELETE] (still images),
according to the type of image you
want to delete, then touch the
image to be deleted.
Creating a DVD with One Touch
(One Touch Disc Burn)
You can save images recorded on the
camcorder directly to a DVD with ease.
The selected image is marked with
.
4
Touch
t [YES] t
.
Saving images on a computer
You can save images recorded on the
camcorder on the hard disk of a computer.
To delete all movies or still images at
one time
Creating a DVD with selected images
You can save images imported to your
computer on a DVD. You can also edit those
images.
In step 3, touch [
DELETE ALL] or [
DELETEALL]t[YES] t[YES]t
.
To delete the still images in the
“Memory Stick Duo”
Saving images by connecting
your camcorder to other devices
1 In step 2, touch [
DELETE].
2 Touch [ DELETE], then touch thestill
image to be deleted.
The selected still image is marked with
.
You can dub images to VCR or DVD/HDD
devices. For details, see “Handycam
Handbook” (PDF).
3 Touch
t [YES] t
.
• To delete all still images on the “Memory Stick
Duo,” in step 2, touch [
[YES] t [YES] t
DELETE ALL] t
.
20
Playing the image on a
TV
Connect your camcorder to the input jack of
TV or VCR using A/V connecting cable 1
(supplied) or A/V connecting cable with S
VIDEO 2 (optional). For details, see
“Handycam Handbook” (PDF).
A/V OUT jack
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
(Red)
(Yellow)
IN
: Signal flow
VCR or TVs
• You can dub the images recorded on the
camcorder to VCR or DVD/HDD recorders. For
details, see “Handycam Handbook” (PDF).
21
Performing with a computer
In the supplied CD-ROM, “Handycam
Handbook” (PDF) and “Picture Motion
Browser” (Software) are contained.
is completed, the short-cut icon of
“Handycam Handbook” appears on the
desktop of your computer.
On the advanced use of your camcorder or
how to use connecting to your computer, see
• ThemodelnameofyourHandycam isprinted
on its bottom surface.
“Handycam Handbook” (PDF).
By using “Picture Motion Browser,” you can
enjoy the following operations:
– Creating a DVD with One Touch
– Importing images to a computer
– Editing the imported images
5 Click [Exit] t [Exit], then remove the CD-
ROM from the disc drive of your computer.
x For Macintosh user
1 Turn on the computer.
2 Place the CD-ROM (supplied) in the disc
drive of your computer.
– Creating a DVD
3 Open the [Handbook] folder in the CD-
ROM, double-clickthe [GB] folder and then
drag-and-drop the “Handbook.pdf” on the
computer.
Install the above on a computer by following
the steps below.
Viewing
“Handycam Handbook” (PDF)
After having the software installed, double-
click “Handbook.pdf”, you can view the
handbook.
To view “Handycam Handbook,” you need
to install Adobe Reader on your computer.
Installing the supplied software
x For Windows user
1 Turn on the computer.
• The supplied software is not compatible with
Macintosh.
2 Place the CD-ROM (supplied) in the disc
drive of your computer.
The select screen for installation appears.
x System requirements
When using the supplied software, you need
the following system requirements below.
OS: Microsoft Windows 2000 Professional,
Windows XP Home Edition, Windows
XP Professional, or Windows XP Media
Center Edition
Standard installation is required.
Operation is not assured if the above OS
has been upgraded or in a multi-boot
environment.
3 Click [Handycam Handbook].
The installation screen for “Handycam
Handbook” appears.
CPU: Intel Pentium III 1 GHz or faster
Application: DirectX 9.0c or later (This
product is based on DirectX technology.
It is necessary to have DirectX installed.)
Sound system: Direct Sound compatible
sound card
4 Select desired language and select the
model name of your Handycam, then
click [Handycam Handbook (PDF)].
Installation starts. When the installation
Memory: 256 MB or more
22
Hard disk: Available free hard disk space
for installation required: Approximately
600 MB (for creating a DVD, 5 GB or
more may be required)
3 Place the supplied CD-ROM in the disc
drive of your computer.
The installation screen appears.
Display: DirectX 7 or later-compatible
video card, Minimum 1024 × 768 dots,
High Color (16 bit color)
Others: USB port (this must be provided
as standard), Disc drive that can burn
DVDs (CD-ROM drive required for
software installation)
• Even in a computer environment where the
operations are guaranteed, frames may be
dropped from movies, resulting in uneven
playback. However, imported images and images
on a DVD created subsequently will not be
affected.
• Operationsarenotguaranteed,evenoncomputers
fulfilling the above system requirements.
• Picture Motion Browser does not support 5.1ch
surround sound reproduction. The sound is
reproduced in 2ch sound.
If the screen does not appear
1Click [Start], then click [My Computer].
(For Windows 2000, double-click [My
Computer].)
2Double-click [SONYPICTUTIL (E:)] (CD-
ROM) (disc drive).*
* Drive names (such as (E:)) may vary
depending on the computer.
4 Click [Install].
5 Select the language for the application to
be installed, then click [Next].
• If you use a Notebook computer, connect it to the
AC Adaptor as the power source. Otherwise, the
software will not work properly due to the power
saving function of the computer.
6 Checkyourareaandcountry/region, then
click [Next].
• The software is set up for your selected
country/region.
x Installing software
7 Read [License Agreement], select [I
acceptthetermsofthelicenseagreement]
when you agree, then click [Next].
You need to install the software to your
Windows computer before connecting
your camcorder to the computer. The
installation is required only for the first time.
Provide the camcorder and the Handycam
Station, and a USB cable beforehand.
Contents to be installed and procedures may
differ depending on your OS.
8 Set the camcorder onto the Handycam
Station, then turn the POWER switch to
turn on.
9 Connect the Handycam Station to your
computer using the supplied USB cable,
then click [Next] on the connection
confirmation screen.
1 Confirm that your camcorder is not
connected to the computer.
2 Turn on the computer.
• Log on as Administrators for installation.
• Close all applications running on the
computer before installing the software.
Even if a screen prompting you to restart
your computer appears, you do not need to
restart it at this time. Restart your computer
after completing the installation.
23
Performing various
functions-“ HOME”
and “ OPTION”
q; Follow the on-screen instructions to
install the software.
Depending on the computer, you may
need to install third party software
(shown below). If the installation screen
appears, follow the instructions to install
the required software.
(HOME) B
– Windows Media Format 9 Series Runtime
(Windows 2000 only)
Software required to create a DVD
– Microsoft DirectX 9.0c
Software required to handle movies
Restart the computer if required to
complete the installation.
(HOME) A
(OPTION)
Theshort-cuticons,suchas[ ](Picture
Motion Browser), appear on the desktop.
qa RemovetheCD-ROMfromthediscdrive
of your computer.
Using the HOME MENU
You can change the recording functions and
the operating settings for your convenience.
For details, see “Handycam Handbook”
(PDF).
• For disconnecting the USB cable, see
“Handycam Handbook” (PDF).
After you install the software,
a shortcut icon for the
customersregistrationwebsite
is created on the desktop.
• Once you register on the website, you can get
secure and useful customer support.
1
Turn on your camcorder, then
press (HOME) A (or B).
2
3
Touch the desired setup item.
• For the information about Picture Motion
Browser, visit the following URL:
Follow the guide on the screen for
further operation.
• If the item is not on the screen, touch v/V to
change the page.
• To hide the HOME MENU screen, touch
.
• You cannot select or activate simultaneously the
grayed items in the current recording/playback
situation.
To see the explanation of the function
ofeachitemontheHOMEMENU(HELP)
1 Press
(HOME).
24
2 Touch
The bottom of the
orange.
(HELP).
Items of the HOME MENU
(HELP) button turns
(CAMERA) category
MOVIE
PHOTO
1
SMTH SLW REC*
(VIEW IMAGES) category
VISUAL INDEX
3 Touchthe itemyouwanttoknow thecontent.
When you touch an item, its explanation
appears on the screen.
PLAYLIST
To apply the option, touch [YES].
(OTHERS) category
DELETE
Using the OPTION MENU
The OPTION MENU appears just like the
pop-up window that appears when you right-
click the mouse on a computer. Various
functions are displayed in the context of the
operation. For details, see “Handycam
Handbook” (PDF).
[
EDIT
[
DELETE], [
DELETE]
DELETE], [
DELETE],
[DIVIDE], [COPY]
PLAYLIST EDIT
ERASE], [ ERASE ALL], [
[
1
Whileusingyourcamcorder,touch
(OPTION) on the screen.
MOVE], [
date]
ADD], [
ADD by
PRINT
[
PRINT], [
COMPUTER
COMPUTER], [
PRINT]
2
3
Touch the desired item.
[
Change the setting, then touch
.
COMPUTER], [DISC BURN]
(MANAGE HDD/MEMORY)
category
• Whentheitemyouwantisnotonthescreen,touch
another tab. If you cannot find the item anywhere,
the function does not work under the situation.
• The tabs and items that appear on the screen
depend on the recording/playback status of your
camcorder at the time.
FORMAT
FORMAT
INFO
• Some items appear without a tab.
• The OPTION MENU cannot beused duringEasy
25
(SETTINGS) category
MOVIE SETTINGS
Items of the OPTION MENU
Items you can set only on the OPTION
MENU will be described below.
[REC MODE], [NIGHTSHOT
2
LIGHT], [WIDE SELECT]* ,
tab
[DIGITAL ZOOM],
[STEADYSHOT], [AUTO SLW
[FOCUS], [SPOT FOCUS], [TELE
MACRO], [EXPOSURE], [SPOT
METER], [SCENE SELECTION],
[WHITE BAL.], [COLOR SLOW SHTR],
[S. NIGHTSHOT PLS]* , [SUPER
NIGHTSHOT]*
1
SHUTTR], [GUIDEFRAME]* ,
1
[ZEBRA]* , [
REMAINING],
1
[FLASH LEVEL]* , [REDEYE
1
REDUC]*
1
2
PHOTO SETTINGS
3 4
[
IMAGE SIZE]* * , [
QUALITY], [FILE NO.],
[NIGHTSHOT LIGHT],
tab
5
[STEADYSHOT]* ,
[FADER], [D.EFFECT], [PICT.EFFECT]
1
1
[GUIDEFRAME]* , [ZEBRA]* ,
3
[FLASH LEVEL]* , [REDEYE
3
4
tab
REDUC]* , [STILL MEDIA]*
[MICREF LEVEL], [SELF-TIMER],
VIEW IMAGES SET
3
2
[FLASH MODE]* , [TIMING]* ,
[DATA CODE], [
DISPLAY]
2
[RECORD SOUND]*
6
SOUND/DISP SET*
4
4
[VOLUME]* , [BEEP]* , [LCD
BRIGHT], [LCD BL LEVEL], [LCD
COLOR]
– (A tab depends on the situation)
[SLIDE SHOW], [SLIDE SHOW SET]
OUTPUT SETTINGS
[TV TYPE], [DISP OUTPUT]
CLOCK/ LANG
– (No tab)
[COPIES], [DATE/TIME], [SIZE]
4
*1 DCR-SR32E/SR42E/SR52E/SR62E/SR72E/
[CLOCK SET]* , [AREA SET],
[SUMMERTIME], [ LANGUAGE
SR82E
4
*2 DCR-SR190E/SR200E/SR290E/SR300E
SET]*
*3 DCR-SR52E/SR62E/SR72E/SR82E
GENERAL SET
[DEMO MODE], [CALIBRATION],
3
[A.SHUT OFF], [REMOTE CTRL]* ,
[DROP SENSOR]
*1 DCR-SR190E/SR200E/SR290E/SR300E
*
2 DCR-SR32E/SR42E
*3 DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E
*4 You can set the item during Easy Handycam
*
5 DCR-SR290E/SR300E
*6 [SOUND SETTINGS] (during Easy Handycam
26
Troubleshooting
and take it to a warm place. Leave the
camcorder there for a while, then turn on
the camcorder.
If you run into any problems using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.
Buttons do not work.
• During Easy Handycam operation,
available buttons/functions are limited.
Cancel Easy Handycam operation. For
details on Easy Handycam operation,
refer to “Handycam Handbook” (PDF).
Notes before sending your camcorder
for repair
• Your camcorder may be required to initialize or
change the current hard disk of the camcorder,
depending on the problem. In the event of this,
the data stored on the hard disk will be deleted.
Be sure to save the data on the internal hard disk
(see “Handycam Handbook” (PDF)) on other
media (backup) before sending your camcorder
for repair. We will not compensate you for any
loss of hard disk data.
Your camcorder gets warm.
• This is because the power has been
turned on for a long time. This is not a
malfunction.
The power abruptly turns off.
• During repair, we may check a minimum amount
of data stored on the hard disk in order to
investigate the problem. However, your Sony
dealer will neither copy nor retain your data.
• When approximately 5 minutes have
elapsed while you do not operate your
camcorder, the camcorder is
automatically turned off (A.SHUT
OFF). Change the setting of [A.SHUT
OFF], or turn on the power again, or use
the AC Adaptor.
The power does not turn on.
• Attach a charged battery pack to the
• Connect the plug of the AC Adaptor to
Pressing START/STOP or PHOTO
does not record images.
• Set the camcorder onto the Handycam
• The playback screen is displayed. Set
your camcorder to recording standby
• Your camcorder is recording the image
you have just shot on the hard disk. You
cannot make new recording during this
period.
• The hard disk of the camcorder is full.
• Total number of movies or still images
exceeds the recordable capacity of your
camcorder. Delete unnecessary images
The camcorderdoesnot operateeven
when the power is set to on.
• Ittakesafewsecondsforyourcamcorder
to be ready to shoot after the power is
turned on. This is not a malfunction.
• Disconnect the AC Adaptor from the
wall socket or remove the battery pack,
then reconnect it after about 1 minute. If
the functions still do not work, press the
pointed object. (If you press the RESET
button, all settings, including the clock
setting, are reset.)
• The temperature of your camcorder is
extremelyhigh.Turnoffyourcamcorder
and leave it for a while in a cool place.
• The temperature of your camcorder is
extremely low. Turn off the camcorder
The recording stops.
• The temperature of your camcorder is
extremely high/low. Turn off your
camcorder and leave it for a while in a
cool/warm place.
27
Warning indicators
Self-diagnosis display/Warning
indicators
Menu items are grayed out.
• There are some functions you cannot
activate simultaneously. For details, see
“Handycam Handbook” (PDF).
IfindicatorsappearontheLCDscreen,check
the following.
Some symptoms you can fix by yourself. If
the problempersists even after you have tried
a couple of times, contact your Sony dealer
or local authorized Sony service facility.
Lights appear on the screen even if
the lens cover is closed (DCR-SR32E/
SR42E/SR52E/SR62E/SR72E/
SR82E).
• When you turn on your camcorder while
the lens cover is closed, lights through
gaps of the lens cover may appear on the
screen. This is not a malfunction.
C:04:00
C:(or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
• Connect the DC plug of the AC Adaptor
to the DC IN jack of the Handycam
C:13:ss / C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
• Turn on your camcorder again.
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
• A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service facility.
Inform them of the 5-digit code, which
starts from “E.”
101-0001 (Warning indicator
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
28
(Warning on the hard disk of the
camcorder)*
(Warning indicators pertaining to
“Memory Stick Duo” formatting)*
• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not
formatted correctly.
Fast flashing
• Anerrormayhaveoccurredwiththehard
disk drive in your camcorder.
(Warning indicator pertaining to
incompatible “Memory Stick Duo”)*
(Warning on the hard disk of the
camcorder)*
• An incompatible “Memory Stick Duo”
is inserted.
Fast flashing
• The hard disk of the camcorder is fully
recorded.
• Anerrormayhaveoccurredwiththehard
disk drive in your camcorder.
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)*
• The write-protect tab on the “Memory
Stick Duo” is set to lock.
• Access to the “Memory Stick Duo” was
restricted on another device.
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating
environment or battery conditions, E
may flash, even if there are
(Warningindicatorpertainingtothe
flash)
approximately 20 minutes remaining.
Fast flashing
• There is something wrong with the flash.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
(Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient, so
camera-shake easily occurs. Use the
flash.
Fast flashing*
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the camcorder
steady with both hands and record the
image. However, note that the camera-
shake warning indicator does not
disappear.
• The temperature of your camcorder is
extremelyhigh.Turnoffyourcamcorder
and leave it for a while in a cool place.
(Low temperature warning)*
Fast flashing
• The temperature of your camcorder is
extremely low. Make the camcorder
warm.
*
You hear a melody when the warning indicators
appear on the screen.
(Warning indicator pertaining to
“Memory Stick Duo”)
• No “Memory Stick Duo” is inserted
29
Precautions
• Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult a doctor
immediately (DCR-SR52E/SR62E/SR72E/
SR82E/SR190E/SR200E/SR290E/SR300E).
• If the battery electrolytic liquid has leaked:
– consult your local authorized Sony service
facility.
– wash off any liquid that may have contacted
your skin.
– ifany liquid getsin youreyes, wash with plenty
of water and consult a doctor.
On use and care
• Do not useor store thecamcorder and accessories
in the following locations:
– Anywhereextremely hot, cold orhumid. Never
leavethemexposedtotemperaturesabove60°C
(140°F), such as under direct sunlight, near
heaters or in a car parked in the sun. They may
malfunction or become deformed.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– NearAMreceiversandvideoequipment.Noise
may occur.
– On a sandy beach or anywhere dusty. If sand or
dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
x Whennotusingyourcamcorderforalong
time
• Periodically turn it on and let it run such as by
playing back or recording images for about 3
minutes.
• Useup thebatterypackcompletelybeforestoring
it.
– Near windows or outdoors, where the LCD
screen or the lens may be exposed to direct
sunlight. This damages the inside of the LCD
screen.
LCD screen
• Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
fromrainorseawater. Ifyourcamcordergetswet,
it may malfunction. Sometimes this malfunction
cannot be repaired.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• Whileusing yourcamcorder, theback of theLCD
screen may heat up. This is not a malfunction.
x To clean the LCD screen
• If any solid object or liquid gets inside the casing,
unplug your camcorder and have it checked by a
Sony dealer before operating it any further.
• Avoidroughhandling,disassembling,modifying,
physical shock, or impact such as hammering,
dropping or stepping on the product. Be
particularly careful of the lens.
• Keep the POWER switch setting to OFF (CHG)
when you are not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft cloth
to clean it. When you use the LCD Cleaning
Kit (optional), do not apply the cleaning
liquid directly to the LCD screen. Use
cleaning paper moistened with the liquid.
On handling the casing
• If the casing is soiled, clean the camcorder body
withasoft clothlightly moistenedwithwater, and
then wipe the casing with a dry soft cloth.
• When disconnecting the mains lead, pull it by the
plug and not the cord.
• Do not damage the mains lead such as by placing
anything heavy on it.
• Avoid the following to avoid damage to the finish:
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
– Handling thecamcorder with above substances
on your hands.
• Keep metal contacts clean.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
30
Specifications
About care and storage of the lens
System
• Wipe the surface of the lensclean with asoft cloth
in the following instances:
Video compression format
MPEG2/JPEG (Still images)
– When there are fingerprints on the lens surface.
– In hot or humid locations
– When the lens is exposed to salty air such as at
the seaside.
• Store in a well-ventilated location subject to little
dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
Audio compression format
DCR-SR32E/SR42E/SR52E/SR62E/
SR72E/SR82E
Dolby Digital 2ch
Dolby Digital Stereo Creator
DCR-SR190E/SR200E/SR290E/SR300E
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Video signal
PAL color, CCIR standards
Hard Disk
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
DCR-SR32E/SR42E/SR52E/SR62E
30 GB
DCR-SR72E/SR82E
60 GB
rechargeable battery to retain the date, time,
and other settings even when the POWER
switchissettoOFF(CHG).Thepre-installed
rechargeable battery is always charged while
your camcorder is connected to the wall
socket via the AC Adaptor or while the
battery pack is attached. The rechargeable
battery will be fully discharged in about 3
months if you do not use your camcorder
at all. Use your camcorder after charging the
pre-installed rechargeable battery.
DCR-SR190E/SR200E/SR290E/SR300E
40 GB
When measuring media capacity, 1GB equals
1 billion bytes, a portion of which is used for
data management.
Recording format
Movie
MPEG2-PS
Still image
Exif *1 Ver.2.2
Recording time
However, even if the pre-installed
DCR-SR32E/SR42E/SR52E/SR62E
HQ:Approx. 440 min
SP: Approx. 650 min
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
LP: Approx. 1 250 min
DCR-SR72E/SR82E
HQ:Approx. 880 min
SP: Approx. 1 300 min
LP: Approx. 2 510 min
DCR-SR190E/SR200E/SR290E/SR300E
HQ:Approx. 570 min
x Procedures
Connect your camcorder to a wall socket
using the supplied AC Adaptor, and leave it
with the POWER switch set to OFF (CHG)
for more than 24 hours.
SP: Approx. 870 min
LP: Approx. 1 680 min
Recordable images/cuts
Movie: 9 999
Still image: 9 999
Image device
DCR-SR32E/SR42E
3.0 mm (1/6 type) CCD (Charge Coupled
Device)
Gross:
Approx. 800 000 pixels
Effective (Movie):
Approx. 400 000 pixels
31
Effective (Still):
Approx. 400 000 pixels
DCR-SR52E/SR62E/SR72E/SR82E
3.0 mm (1/6 type) CCD (Charge Coupled
Device)
DCR-SR290E/SR300E
Carl Zeiss Vario-Sonnar T
Optical:10 ×, Digital:20 ×
Filter diameter: 37 mm (1 1/2 in.)
Focal length
Gross:
DCR-SR32E/SR42E
F=1.8 - 4.1
f=1.9 - 76.0 mm (3/32 - 3 in.)
When converted to a 35 mm still camera
For movies:
36 - 1 440 mm (1 7/16 - 56 3/4 in.)
For still images:
Approx. 1 070 000 pixels
Effective (Movie, 16:9)
Approx. 670 000 pixels
Effective (Movie, 4:3)
Approx. 690 000 pixels
Effective (Still, 4:3)
Approx. 1 000 000 pixels
Effective (Still, 16:9)
Approx. 750 000 pixels
36 - 1 440 mm (1 7/16 - 56 3/4 in.)
DCR-SR52E/SR62E/SR72E/SR82E
F=1.8 - 3.2
f=2.5 - 62.5 mm (1/8 - 2 1/2 in.)
When converted to a 35 mm still camera
For movies:
41 - 1 189 mm (1 5/8 - 46 7/8 in.) (16:9)*
43 - 1 075 mm (1 3/4 - 42 3/8 in.) (4:3)
For still images:
36 - 900 mm (1 7/16 - 35 1/2 in.) (4:3)
39 - 975 mm (1 9/16 - 38 1/2 in.) (16:9)
DCR-SR190E/SR200E
5.9 mm (1/3 type) CMOS sensor
Recording pixels (still image, 4:3):
Max. 4.0 mega (2 304 × 1 728) pixels*
Gross:
Approx. 2 100 000 pixels
Effective (Movie, 16:9)
Approx. 1 430 000 pixels
Effective (Movie, 4:3)
Approx. 1 080 000 pixels
Effective (Still, 4:3)
Approx. 1 990 000 pixels
Effective (Still, 16:9)
Approx. 1 490 000 pixels
DCR-SR290E/SR300E
6.3 mm (1/2.9 type) CMOS sensor
Recording pixels (still image, 4:3):
Max. 6.1 mega (2 848 × 2 136) pixels*
Gross:
Approx. 3 200 000 pixels
Effective (Movie, 16:9)
Approx. 2 280 000 pixels
Effective (Movie, 4:3)
Approx. 1 710 000 pixels
Effective (Still, 4:3)
Approx. 3 040 000 pixels
Effective (Still, 16:9)
Approx. 2 280 000 pixels
2
3
DCR-SR190E/SR200E
F=1.8 - 2.9
f=5.1 - 51 mm (7/32 - 2 1/8 in.)
When converted to a 35 mm still camera
3
For movies* :
41.3 - 485 mm (1 11/16 - 19 1/8 in.) (16:9)
50.5 - 594 mm (2 - 23 1/2 in.) (4:3)
For still images:
37 - 370 mm (1 1/2 - 14 5/8 in.) (4:3)
40.4 - 404 mm (1 5/8 - 16 in.) (16:9)
DCR-SR290E/SR300E
F=1.8 - 2.9
f=5.4 - 54 mm (7/32 - 2 1/8 in.)
When converted to a 35 mm still camera
For movies:
40 - 400 mm (1 5/8 - 15 3/4 in.) (16:9)
49 - 490 mm (1 15/16 - 19 3/8 in.) (4:3)
For still images:
2
37 - 370 mm (1 1/2 - 14 5/8 in.) (4:3)
40 - 400 mm (1 5/8 - 15 3/4 in.) (16:9)
Lens
Color temperature
DCR-SR32E/SR42E
Carl Zeiss Vario-Tessar
Optical:40 ×, Digital:80 ×, 2 000 ×
Filter diameter: 30 mm (1 3/16 in.)
[AUTO], [ONE PUSH], [INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
Minimum illumination
DCR-SR32E/SR42E
DCR-SR52E/SR62E/SR72E/SR82E
Carl Zeiss Vario-Tessar
Optical:25 ×, Digital:50 ×, 2 000 ×
Filter diameter: 30 mm (1 3/16 in.)
3 lx (lux) (when [AUTO SLW SHUTTR] is set
to [ON], Shutter speed 1/25 second)
0 lx (lux) (during NightShot plus function)
DCR-SR52E/SR62E/SR72E/SR82E
4 lx (lux) (when [AUTO SLW SHUTTR] is set
to [ON], Shutter speed 1/25 second)
DCR-SR190E/SR200E
Carl Zeiss Vario-Sonnar T
Optical:10 ×, Digital:20 ×, 80 ×
Filter diameter: 37 mm (1 1/2 in.)
0 lx (lux) (during NightShot plus function)
32
DCR-SR190E/SR200E/SR290E/SR300E
1.5 lx (lux) (when [AUTO SLW SHUTTR] is
set to [ON], Shutter speed 1/25 second)
0 lx (lux) (during NightShot function)
General
Power requirements
6.8 V/7.2 V (battery pack)
8.4 V (AC Adaptor)
*1 “Exif”isafileformatforstillimages,established
bytheJEITA(JapanElectronicsandInformation
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
Average power consumption
During camera recording with normal
brightness.
DCR-SR32E/SR42E
2.6 W
*2 The unique pixel array of Sony’s ClearVid
CMOS Sensor and image processing system
(new Enhanced Imaging Processor) allows still
image resolution equivalent to the sizes
described.
DCR-SR52E/SR62E/SR72E/SR82E
3.0 W
DCR-SR190E/SR200E
3.6 W
DCR-SR290E/SR300E
4.2 W
*3 In 16:9 mode, the focal length figures are actual
figures resulting from wide angle pixel readout.
• Manufactured under license from Dolby
Laboratories.
Operating temperature
0°C to + 40°C (32°F to 104°F)
Storage temperature
-20°C to + 60°C (-4°F to + 140°F)
Input/Output connectors
Dimensions (Approx.)
Audio/Video output
DCR-SR32E/SR42E/SR52E/SR62E/
SR72E/SR82E
10-pin connector
Video signal: 1 Vp-p, 75 Ω (ohms)
Luminance signal: 1 Vp-p, 75 Ω (ohms)
Chrominance signal: 0.3 Vp-p, 75 Ω (ohms)
Audio signal: 327 mV (at load impedance
47 kΩ (kilohms)), Output impedance less than
2.2 kΩ (kilohms)
73 × 72 × 109 mm (2 7/8 × 2 7/8 × 4 3/8 in.)
(w×h×d) including the projecting parts
73 × 72 × 115 mm (2 7/8 × 2 7/8 × 4 5/8 in.)
(w×h×d) including the projecting parts with
supplied battery pack NP-FH40 attached
DCR-SR190E/SR200E/SR290E/SR300E
76 × 78 × 128 mm (3 × 3 1/8 × 5 1/8 in.)
(w×h×d) including the projecting parts
76 × 78 × 149 mm (3 × 3 1/8 × 5 7/8 in.)
(w×h×d) including the projecting parts with
supplied battery pack NP-FH60 attached
REMOTE jack (except for DCR-SR32E/SR42E)
Stereo mini-minijack (Ø 2.5 mm)
LCD screen
Picture
Mass (Approx.)
DCR-SR32E/SR42E
6.2 cm (2.5 type)
DCR-SR52E/SR62E/SR72E/SR82E/
SR190E/SR200E/SR290E/SR300E
6.9 cm (2.7 type, aspect ratio 16:9)
DCR-SR32E/SR42E
335 g (11 oz) main unit only
380 g (13 oz) including the NP-FH40
rechargeable battery pack
DCR-SR52E/SR62E
Total number of pixels
350 g (12 oz) main unit only
395 g (14 oz) including the NP-FH40
rechargeable battery pack
DCR-SR32E/SR42E/SR52E/SR62E/
SR72E/SR82E
123 200 (560 × 220)
DCR-SR72E/SR82E
360 g (12 oz) main unit only
405 g (14 oz) including the NP-FH40
rechargeable battery pack
DCR-SR190E/SR200E/SR290E/SR300E
211 200 (960 × 220)
DCR-SR190E/SR200E
455 g (1 lb) main unit only
535 g (1 lb 2 oz) including the NP-FH60
rechargeable battery pack
33
DCR-SR290E/SR300E
Rechargeable battery pack
NP-FH40 (DCR-SR32E/SR42E/SR52E/
SR62E/SR72E/SR82E)
480 g (1 lb 1 oz) main unit only
560 g (1 lb 3 oz) including the NP-FH60
rechargeable battery pack
Supplied accessories
Maximum output voltage
DC 8.4 V
Output voltage
Handycam Station DCRA-C171
Input/Output connectors
DC 7.2 V
Capacity
Audio/Video output
4.9 wh (680 mAh)
10 pin connector
Dimensions (Approx.)
Video signal: 1 Vp-p, 75 Ω (ohms)
Luminance signal: 1 Vp-p, 75 Ω (ohms)
Chrominance signal: 0.3 Vp-p, 75 Ω (ohms)
Audio signal: 327 mV (at load impedance
47 kΩ (kilohms)), Output impedance less than
2.2 kΩ (kilohms)
31.8 × 18.5 × 45.0 mm
(1 5/16 × 3/4 × 1 13/16 in.)(w×h×d)
Mass (Approx.)
45 g (1.6 oz)
Operating temperature
0°C to + 40°C (32°F to 104°F)
USB jack
mini-B
Type
(DCR-SR32E/SR52E/SR72E/SR190E/
SR290E: output only)
Li-ion
NP-FH60 (DCR-SR190E/SR200E/
SR290E/SR300E)
AC Adaptor AC-L200/L200B
Power requirements
Maximum output voltage
AC 100 - 240 V, 50/60 Hz
DC 8.4 V
Current consumption
Output voltage
0.35 - 0.18 A
DC 7.2 V
Power consumption
Capacity
18 W
7.2 wh (1 000 mAh)
Output voltage
Dimensions (Approx.)
DC 8.4 V*
31.8 × 33.3 × 45.0 mm
(1 5/16 × 1 5/16 × 1 13/16 in.)(w×h×d)
Operating temperature
0°C to + 40°C (32°F to 104°F)
Mass (Approx.)
80 g (2.9 oz)
Storage temperature
-20°C to + 60°C (-4°F to + 140°F)
Operating temperature
0°C to + 40°C (32°F to 104°F)
Dimensions (Approx.)
48 × 29 × 81 mm (1 15/16 × 1 3/16 × 3 1/4
in.)(w×h×d) excluding the projecting parts
Type
Li-ion
Mass (Approx.)
Design and specifications are subject to change
without notice.
170 g (6.0 oz) excluding the mains lead
*
See at the label of AC Adaptor for other
specifications.
34
On trademarks
• “Handycam” and
are registered trademarks of Sony Corporation.
• “Memory Stick,” “
Duo,” “
,” “Memory Stick
,” “Memory Stick
PRO Duo,” “
“MagicGate,” “
,”
,”
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks of Sony
Corporation.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
• DVD-R, DVD+R DL, DVD-RW, and DVD+RW
logo are trademarks.
• Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
• Dolby Digital 5.1 Creatorisa trademark of Dolby
Laboratories.
• Microsoft, Windows, and Windows Media are
trademarks or registered trademarks of U.S.
Microsoft Corporation in the U.S. and other
countries.
• Macintosh and Mac OS are registered trademarks
of Apple Computer, Inc. in the U.S. and other
countries.
• Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
• Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States
and/or other countries.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®” are
not mentioned in each case in this manual.
35
Additional information on this product and
answers to frequently asked questions can be
found at our Customer Support Website.
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)-
free vegetable oil based ink.
Printed in Japan
|