4-121-565-14(1)
Digital HD Video
Camera Recorder
Operating Guide
Before operating the unit, please read this manual thoroughly,
and retain it for future reference
HXR-MC1P
© 2009 Sony Corporation
• Do not apply shock or vibration to this
camcorder. This may cause a malfunction.
If you must use this camcorder where
shock or vibration is likely, use a
commercially available shock absorber,
etc.
• Do not do any of the following when the
(Movie)/
(Still) mode lamps
flashing.
Otherwise, the media may be damaged,
recorded images may be lost or other
malfunctions could occur.
– Eject the “Memory Stick PRO Duo”
media from the camcorder
Black point
White, red, blue or green point
– Remove the battery pack or AC Adaptor
from the camcorder.
• Exposing the LCD screen or the lens to
direct sunlight for long periods of time
may cause malfunctions.
• Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take images of the sun only in low light
conditions, such as at dusk.
– Apply mechanical shock or vibration to
the camcorder.
• When connecting your camcorder to
another device with a cable, be sure to
insert the connector plug in the correct
way. Pushing the plug forcibly into the
terminal will damage the terminal and
may result in a malfunction of your
camcorder.
About changing the language setting
• The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
About menu items, LCD panel and
lens
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
• The LCD screen is manufactured using
extremely high-precision technology, so
over 99.99% of the pixels are operational
for effective use. However, there may be
some tiny black points and/or bright
points (white, red, blue, or green in color)
that appear constantly on the LCD screen.
These points are normal results of the
manufacturing process and do not affect
the recording in any way.
On recording
• When you use a memory card with your
camcorder for the first time, formatting
the memory card with your camcorder
(p. 45) is recommended for stable
operation.
All data recorded on the memory card will
be deleted when it is formatted, and
cannot be recovered. Save important data
to your computer, etc., beforehand.
• Before starting to record, test the
recording function to make sure the image
and sound are recorded without any
problems.
3
• Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder, storage
media, etc.
• TV color systems differ depending on the
country/region. To view your recordings
on a TV, you need a PAL system-based
TV.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
Save all your recorded image data
• To prevent your image data from being
lost, save all your recorded images on
external media. It is recommended that
you save the image data on a disc such as
DVD-R using your computer, etc. (p. 33).
Also, you can save your image data using
• It is recommended that you save your
image data periodically, after recording.
About this manual
• The images of the LCD screen used in this
manual for illustration purposes are
captured using a digital still camera, and
therefore may appear different.
If you cannot record/play back
images, perform [MEDIA FORMAT]
• If you repeat recording/deleting images
for a long time, fragmentation of data may
occur on the “Memory Stick PRO Duo”
media. Images cannot be saved or
• Design and specifications of your
camcorder and accessories are subject to
change without notice.
recorded. In such a case, save your images
on some type of external media first, and
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens.
MTF = Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
On playing back recorded images on
other devices
• Your camcorder is compatible with
MPEG-4 AVC/H.264 High Profile for
HD (high definition) image quality
recording. Therefore, you cannot play
back images recorded with HD (high
definition) image quality on your
camcorder with the following devices;
– Other AVCHD format compatible
devices which are not compatible with
High Profile
– Devices which are not compatible with
the AVCHD format
4
Table of Contents
Zooming ............................................................................................. 20
Recording high quality still images during movie recording
Creating the Playlist ...............................................................................38
5
MENU ........................................................................................... 47
GENERAL SET ...................................................................................... 57
Troubleshooting ..................................................................................... 69
6
7
GSetttiengpSta1rte:d Checking supplied items
Controller hook (1) (p. 89)
Make sure that you have the following
items supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
Cable clamper (1) (p. 90)
Component A/V cable (1) (p. 29)
CD-ROM “Video Camera Application
Software” (1)
– PMB (Picture Motion Browser) including
PMB Guide (p. 68)
CD-ROM “Manuals for Digital HD Video
Camera Recorder” (1)
“Operating Guide” (2)
Rechargeable battery pack NP-FH60 (1)
8
Step 2: Charging the battery pack
Battery pack
CHG (charge)
lamp
DC IN jack
DC plug
Jack cover
Power cord
(Mains lead)
POWER switch
To the wall outlet
(wall socket)
AC Adaptor
You can charge the “InfoLITHIUM”
battery pack H series (p. 79) after
attaching it to your camcorder.
3
4
Slide the POWER switch to OFF
(the default setting).
b Notes
• You cannot attach any “InfoLITHIUM” battery
pack other than H series to your camcorder.
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
The CHG (charge) lamp lights up and
charging starts. When the CHG (charge)
lamp turns off, the battery pack is fully
charged.
1
2
Open the jack cover, then align
the v mark of the DC plug with
the V of the DC IN jack on the
camcorder, then connect the DC
plug to the DC IN jack on the
camcorder.
b Notes
• Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
9
To remove the battery pack
Slide the POWER switch to OFF.
Slide the BATT RELEASE lever and
remove the battery pack.
DISPLAY/BATT INFO
BATTRELEASE
lever
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISPLAY/BATT INFO again
while the information is displayed.
b Notes
• When you remove the battery pack or
disconnect the AC Adaptor, make sure that the
(Movie) lamp/
Remaining battery (approx.)
remove the battery pack or disconnect the AC
Adaptor while the power is turned on, the
setting cannot be saved.
• When you store the battery pack, fully discharge
the battery before storing it for an extended
Recording capacity (approx.)
To use a power source from a wall
outlet (wall socket)
Charging time
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack
NP-FH50
Charging time
To check the remaining battery
(Battery Info)
Slide the POWER switch to OFF, then
press DISPLAY/BATT INFO.
135
135
170
390
NP-FH60 (supplied)
NP-FH70
NP-FH100
10
On the battery pack
• When you remove the battery pack, turn off
your camcorder, and turn off the
Approximate available recording time
Approximate time (min.) available when
you use a fully charged battery pack.
“HD” stands for high definition image
quality, and “SD” stands for standard image
quality.
(Movie)
lamp/
• The CHG (charge) lamp flashes during
charging, or Battery Info (p. 10) will not be
correctly displayed under the following
conditions:
– The battery pack is not attached correctly.
– The battery pack is damaged.
Typical
recording
time*
Continuous
recording time
Battery pack
Image quality
HD
SD
HD
SD
– The battery pack is worn-out (for Battery Info
only).
NP-FH50
80
100
40
50
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord (mains lead) is disconnected from
the wall outlet (wall socket).
NP-FH60
(supplied)
110
130
55
65
NP-FH70
180
405
215
485
90
105
240
NP-FH100
200
• We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
On the charging/recording/playback time
b Notes
• All times measured under the following
conditions:
– [REC MODE]: [HD FH] or [SD HQ]
– When the LCD backlight turns on
• Times measured with the camcorder at 25°C
(77°F). 10°C to 30°C (50°F to 86°F) is
recommended.
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
Approximate playback time
Approximate time (min.) available when
you use a fully charged battery pack.
“HD” stands for high definition image
quality, and “SD” stands for standard image
quality.
On the AC Adaptor
• Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Playing back on the
Battery pack
LCD screen*
Image quality
NP-FH50
HD
125
165
270
600
SD
140
190
300
680
NP-FH60 (supplied)
NP-FH70
NP-FH100
• Even if your camcorder is turned off, AC power
source (mains) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.
* When the LCD backlight is on.
11
Step 3: Turning the power on, and setting the
date and time
Set the date and time when using this
camcorder for the first time.
If you do not set the date and time, the
[CLOCK SET] screen appears every time
you turn on your camcorder or press the
3
Touch
(HOME) t
(SETTINGS) t [CLOCK/
LANG] t [CLOCK SET].
The [CLOCK SET] screen appears.
(Movie)/
(Still) select button.
Touch the button on the
LCD screen.
4
Select the desired geographical
area with
[NEXT].
/
, then touch
5
6
Set [SUMMERTIME], then touch
[NEXT].
(Movie)/
select button
(Still)
Set [Y] (year) with
/
.
POWER switch
1
2
Turn on your camcorder.
While pressing the green button, slide
the POWER switch to ON.
7
8
Select [M] with
the month with
/
/
, then set
.
Press the
(Movie)/
(Still)
select button and turn on the
desired mode lamp.
Set [D] (day), hour and minute in
the same way, then touch [NEXT].
(Movie): To record movies
(Still): To record still images
Go to step 4 when you turn on your
camcorder for the first time.
12
Changing the language setting
9
Make sure that the clock is
correctly set, then touch
.
You can change the on-screen displays to
show messages in a specified language. To
select the screen language, touch
The clock starts.
You can set any year up to the year
2037.
(HOME) t
(SETTINGS) t [CLOCK/
LANG] t [
To turn off the LCD backlight to make
the battery last longer
Press and hold DISPLAY/BATT INFO for
a few seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold
DISPLAY/BATT INFO for a few seconds
until
disappears.
b Notes
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
• It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
z Tips
• Touch
(HOME) t
(SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
screen.
• The information is displayed or hidden (display
y no display) each time you press DISPLAY/
BATT INFO.
• The date and time does not appear during
recording, but they are automatically recorded
on the “Memory Stick PRO Duo” media, and
can be displayed during playback ([DATA
• If the buttons on the touch panel do not work
correctly, adjust the touch panel
13
Step 4: Inserting “Memory Stick PRO Duo”
media
you can use with your camcorder.
z Tips
• See following pages on the recordable time of
movies and recordable number of still images.
– Movies (p. 15)
3
Touch [YES].
1
Insert the “Memory Stick PRO
Duo” media.
To eject “Memory Stick PRO Duo”
media
Open the “Memory Stick Duo” media
cover, lightly push the “Memory Stick PRO
Duo” media in once.
1 Open the “Memory Stick Duo” media
cover.
2 Insert the “Memory Stick PRO Duo”
media all the way in until it clicks.
3 Close the “Memory Stick Duo” media
cover.
b Notes
• Do not do any of the following when the
(Movie)/
Otherwise, the media may be damaged,
recorded images may be lost or other
malfunctions could occur.
– Eject the “Memory Stick PRO Duo” media
from the camcorder
– Remove the battery pack or AC Adaptor
– Shake or knock your camcorder
• Do not open the “Memory Stick Duo” media
cover during recording.
• If you force the “Memory Stick PRO Duo”
media into the slot in the wrong direction, the
“Memory Stick PRO Duo” media, the “Memory
Stick Duo” media slot, or image data may be
damaged.
Access lamp
• If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] is displayed on step 3, format the
that formatting will delete all data recorded on
the “Memory Stick PRO Duo” media.
• When inserting or ejecting the “Memory Stick
PRO Duo” media, be careful so that the
“Memory Stick PRO Duo” media does not pop
out and drop.
2
While pressing the
green button, slide
the POWER switch
to ON to turn on the
(Movie) lamp.
When you insert new “Memory Stick
PRO Duo” media, the [Create a new
Image Database File.] screen appears.
z Tips
• You can shoot still images without creating a
management file.
14
b Notes
Expected recording time of
movies
• When using “Memory Stick PRO Duo” media
made by Sony Corporation. The recordable time
for movies varies depending on the recording
conditions, subject conditions, and the type of
“Memory Stick” media.
The recording time depends on the capacity
of “Memory Stick PRO Duo” media and
indicates the minimum recording time.
z Tips
• Figures such as 16M in the table show the
average bit rate. M stands for Mbps.
• For the number of recordable still images, see
HD (high definition) image quality
(min.)
AVC HD AVC HD AVC HD AVC HD
• You can record movies of a maximum of 3,999
scenes with HD (high definition) image quality,
and 9,999 scenes with SD (standard definition)
image quality.
• This technology causes fluctuations in the
recording time of the “Memory Stick PRO Duo”
media.
Movies containing quickly moving and complex
images are recorded at a higher bit rate, and this
reduces the overall recording time.
16M
9M
7M
5M
(FH)* (HQ)** (SP)** (LP)**
6
10
15
20
1GB
2GB
4GB
8GB
16GB
(6)
(9)
(10)
(15)
10
25
30
40
(10)
(20)
(20)
(35)
25
55
65
85
(25)
(40)
(45)
(70)
55
(55)
115
(80)
140
(100)
180
(145)
110
(110)
230
(160)
280
(200)
355
(290)
*
Movies are recorded with AVCHD 1920 ×
1080/50i format.
** Movies are recorded with AVCHD 1440 ×
1080/50i format.
SD (standard definition) image quality
(min.)
SD 9M
(HQ)
SD 6M
(SP)
SD 3M
(LP)
10
(10)
20
(10)
35
(25)
1GB
2GB
4GB
8GB
16GB
25
(25)
40
(25)
80
(50)
55
(50)
80
(50)
160
(105)
115
(100)
170
(100)
325
(215)
230
(205)
340
(205)
655
(435)
15
Recording/Playback
Using the HOME MENU
You can change the recording functions and
the operating settings for your convenience.
4
5
Touch the desired item.
Example: [EDIT]
1
While pressing the green button,
slide the POWER switch to ON.
Follow the guide on the screen for
further operation.
POWER switch
2
Touch
(HOME).
(HOME)
To hide the HOME MENU screen
Touch
.
To see the explanation of the HOME
MENU (HELP)
1 Touch
(HOME).
The HOME MENU appears.
3
Touch the desired category.
Example: (OTHERS) category
2 Touch
The bottom of the
orange.
(HELP).
(HELP) turns
16
3 Touch the item you want to learn more
about.
When you touch an item, its explanation
appears on the screen. To apply the option,
touch [YES], otherwise, touch [NO].
z Tips
• To deactivate the HELP, touch
(HELP)
again in step 2.
17
Recording
In the default setting, the image quality is set to HD (high definition). To change the image
(HOME) A
(Movie) lamp
(Still) lamp
START/STOP B
PHOTO C
(Movie)/
(Still)
select button E
HOLD. switch D
b Notes
• If you aim the lens towards a strong light source, such as car headlights or the sun, a “ghost” caused by the
lens may appear in the picture.
• If the access lamp is lit or flashing after recording is finished, it means data is still being written onto the
“Memory Stick PRO Duo” media. Do not apply shock or vibration to your camcorder, and do not remove
the battery or AC Adaptor.
• When a movie file exceeds 2 GB, the next movie file is created automatically.
• When the HOLD. switch D is set to the right, the buttons and touch panel cannot be operated (p. 20).
z Tips
• For types of “Memory Stick” media you can use in your camcorder, see page 2.
• You can check the recordable time and the remaining capacity, etc., by touching
(HOME) A t
• The image is displayed in a smaller recording angle on the LCD screen of the main body (approx. 92%)
than when the image signal is output from A/V Remote Connector or HDMI OUT jack and viewing the
image on a monitor device.
To set the recording angle in detail, it is recommended to check the image displayed on the monitor device
before setting the recording angle.
18
Recording movies
Recording still images
1
While pressing the green button,
slide the POWER switch to ON to
1
While pressing the green button,
slide the POWER switch to ON.
turn on the
(Movie) lamp.
2
3
Press the
select button E until the
(Still) lamp lights up.
(Movie)/
(Still)
2
Press START/STOP B.
Press PHOTO C lightly to adjust
the focus A (a beep sounds),
then press it fully B (a shutter
click sounds).
[STBY] t [REC]
To stop recording, press START/STOP
B again.
Flashing bLights up
appears beside
. When
disappears, the image has been
recorded.
z Tips
• You can switch the shooting mode by touching
[PHOTO].
(HOME) A t
(CAMERA) t [MOVIE] or
19
Preventing operation errors
Zooming
If you slide the HOLD. switch to the
right, the buttons cannot function. Use this
function to prevent pressing incorrect
buttons.
You can magnify images up to 10 times the
original size with the power zoom lever.
HOLD. switch
The following operations become invalid.
– Touch panel
–
(Movie)/
Close view: (Telephoto)
– DISPLAY/BATT INFO button (p. 10)
– CAM CTRL dial (p. 22)
– Power zoom lever
– MANUAL button (p. 22)
z Tips
• The following functions are still available, when
the HOLD. switch is set to the right.
– POWER switch
– DISPLAY/BATT INFO button (p. 10)
(displays the Battery Info when the POWER
switch is set to OFF)
Wider range of view:
(Wide angle)
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
– [A.SHUT OFF] (p. 57)
b Notes
• The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
want to zoom to a level greater than 10 × when
recording movies.
20
2 Press START/STOP.
Recording high quality still
images during movie recording
(Dual Rec)
A 3-second movie (approx.) is recorded as
a 12 second-slow-motion-movie.
[Recording···] disappears, when recording
is finished.
You can record high quality still images
during movie recording by pressing
PHOTO.
Touch
to cancel the smooth slow
recording.
b Notes
To change the setting
• Do not eject the “Memory Stick PRO Duo”
media before movie recording is finished and
the still images are completely stored on the
“Memory Stick PRO Duo” media.
Touch
(OPTION) t
tab, then
select the setting you want to change.
• [TIMING]
•
may appear when the capacity of the
“Memory Stick PRO Duo” media is not enough
or when you record still images continuously.
Select the recording start point after
START/STOP is pressed. The default
setting is [3sec AFTER].
You cannot record still images while
displayed.
is
z Tips
• When the
(Movie) lamp is lit, the size of
[3sec AFTER]
still images becomes [
[1.7M] (4:3).
2.3M] (16:9 wide) or
• You can record still images during recording
standby in the same way as when the
lamp is turned on.
(Still)
[3sec BEFORE]
Recording the fast action in
• [RECORD SOUND]
slow-motion (SMTH SLW REC)
Select [ON] (
) to superimpose sounds
such as conversation on the slow motion
pictures (The default setting is [OFF]).
Your camcorder records sounds for about
12 seconds while [Recording···] is
displayed in step 2.
Fast moving subjects and actions, which
cannot be captured under the ordinary
shooting conditions, can be shot in smooth
moving slow-motion for about 3 seconds.
This is useful to shoot fast actions such as a
golf or tennis swing.
b Notes
• Sounds cannot be recorded while shooting a
3-second movie (approx.).
• Image quality of [SMTH SLW REC] is not as
good as that of normal recording.
1 Touch
t [SMTH SLW REC].
(HOME) t
(CAMERA)
21
Controlling the image settings
manually with the CAM CTRL
dial
You can assign one menu item you use
often to the CAM CTRL dial.
Since the focus adjustment is assigned to
the CAM CTRL dial in the default settings,
the operation below is described as
adjusting the focus using the dial.
2 Rotate the CAM CTRL dial and select the
item to be assigned.
3 Press MANUAL.
b Notes
• Manual settings will be retained even if you
change the assigned item of the CAM CTRL
dial. However, if you set [EXPOSURE] after
setting [AE SHIFT] manually, [EXPOSURE]
will override [AE SHIFT].
• If you select [RESET] in step 2, all the items
adjusted manually are reset to the default
settings.
z Tips
• The functions of the items that can be assigned
to the CAM CTRL dial are the same as those of
menu operation.
MANUAL
• You can also assign menu items to the CAM
CAM CTRL dial
CTRL dial by touching
(HOME) t
(SETTINGS) t [MOVIE SETTINGS]/
[PHOTO SETTINGS] t [DIAL SETTING]
1 Press MANUAL to activate the manual
adjustment mode.
Pressing MANUAL switches the setting
mode between automatic and manual.
2 Rotate the CAM CTRL dial to adjust the
focus.
Items you can assign to the CAM CTRL
dial
– [EXPOSURE] (p. 62)
– [AE SHIFT] (p. 49)
– [WB SHIFT] (p. 49)
To assign the menu items to the CAM
CTRL dial
1 Press and hold MANUAL for a few
seconds.
The [DIAL SETTING] screen appears.
22
Playback
(HOME) A
(VIEW IMAGES) B
Power zoom lever C
1
2
While pressing the green button, then slide the POWER switch to ON to turn
on your camcorder.
Touch
(VIEW IMAGES) B.
The VISUAL INDEX screen appears on the LCD screen (It may take some time to display
the thumbnails).
Appears with the image on the tab that was lastly played back/recorded
(B for the still image)
HOME MENU
Selects images by date
Previous 6 images
Next 6 images
Returns to the
recording screen
(OPTION)
23
1
2
3
4
:Displays movies with HD (high definition) image quality.*
:Displays still images.
*
appears when you select the movie with SD (standard definition) image quality in
[
/
z Tips
• The number of the images on the VISUAL INDEX screen can be changed 6 y 12 by moving the power
zoom lever C. To fix this number, touch (HOME) A t (SETTINGS) t [VIEW IMAGES
3
Start playing back.
Playing movies
Touch the or
tab, then select the desired movie to play back.
Toggles Play or Pause as you touch
Return (to the VISUAL
INDEX screen)
Beginning of the scene/
previous scene
Next scene
(OPTION)
Stop (go to the VISUAL
INDEX screen)
Reverse/Forward
z Tips
• When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
screen.
• Touch
/
during pause to play back movie slowly.
• A touch of
/
makes the reverse/fast forward approximately 5 times faster, 2 touches makes it
approximately 10 times faster, 3 touches makes it approximately 30 times faster, and 4 touches makes it
approximately 60 times faster.
To adjust the sound volume
Touch
(OPTION) t
tab t [VOLUME], then adjust the volume with
/
.
24
Viewing still images
Touch the tab, then select the desired still image to play back.
Return (to the VISUAL
INDEX screen)
Slide show (p. 28)
(OPTION)
Goes to the VISUAL INDEX
screen
Previous/Next
z Tips
• You can switch the playback mode by touching
[VISUAL INDEX].
(HOME) A t
(VIEW IMAGES) t
25
Searching for desired scene by
pinpoint (Film Roll Index)
Searching for desired scene by
face (Face Index)
Movies can be divided by a set time and the
first scene of each division is displayed on
the index screen. You can start playing back
a movie from the selected thumbnail.
The face images detected during movie
recording are displayed on the index screen.
You can play back the movie from the
selected face image.
Set [ INDEX SET] to [ON] before
recording to play back from [ INDEX]
(p. 51). Make sure that
recording, and detected face images are
stored in [Face Index].
flashes during
1
2
Turn on the camcorder, and touch
(VIEW IMAGES).
The VISUAL INDEX screen appears.
1
2
Turn on the camcorder, and touch
(VIEW IMAGES).
Touch
(Film Roll Index).
The VISUAL INDEX screen appears.
Returns to the VISUAL INDEX
screen
Touch
(Face Index).
Returns to the VISUAL INDEX
screen
Sets the interval at which to create
thumbnails of scenes in a movie.
3
4
Touch
movie.
/
to select the desired
3
4
Touch
movie.
/
/
to select the desired
, then touch the
Touch
/
to search for the
desired scene, then touch the
scene you want to play back.
Touch
desired face image to view the
scene.
Playback starts from the selected scene.
Playback starts from the beginning of
the scene with the selected face image.
z Tips
• You can display the [Film Roll Index] screen by
touching
IMAGES) t [
(HOME) t
(VIEW
INDEX].
26
b Notes
4
Touch
/
to select the date of
• Faces may not be detected depending on
recording conditions.
Example: People wearing glasses or hats, or
who do not face towards the camera.
the desired movie, then touch
.
The movies of the selected date are
displayed on the VISUAL INDEX
screen.
z Tips
• You can display the [Face Index] screen by
touching
IMAGES) t [
(HOME) t
(VIEW
INDEX].
z Tips
Searching for desired images by
date (Date Index)
• On the [Film Roll Index]/[Face Index] screen,
you can use the Date Index function by
following the steps 3 to 4.
You can search for desired movies by date
efficiently.
Using PB zoom
b Notes
You can magnify still images from about
1.1 to 5 times the original size.
Magnification can be adjusted with the
power zoom lever.
• You cannot use the Date Index function for still
images.
1
Turn on the camcorder, and touch
(VIEW IMAGES).
The VISUAL INDEX screen appears.
2
3
Touch the
or
tab.
Touch date on the screen.
The recording dates of movies are
displayed on the screen.
1 Play back the still images you want to
Returns to the VISUAL INDEX
screen
magnify.
2 Magnify the still image with T
(Telephoto).
The screen is framed.
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with T
(Telephoto)/W (Wide angle).
To cancel, touch
.
27
Playing the image on
a TV
Playing back a series of still
images (Slide show)
Connection methods and quality of the
image viewed on the TV screen differ
depending on what type of TV is connected,
and the connectors used.
Use the supplied AC Adaptor as the power
Refer also to the instruction manuals
supplied with the device to be connected.
A/V Remote
Connector
Touch
screen.
on the still image playback
The slide show begins from the selected
still image.
Touch
to stop the slide show.
To restart, touch
again.
b Notes
Open the jack cover.
• You cannot operate playback zoom during slide
show.
z Tips
• You can also play back the slide show by
touching
(OPTION) t
tab t [SLIDE
SHOW] on the VISUAL INDEX screen.
• You can set continuous slide show playback by
touching
(OPTION) t
tab t [SLIDE
SHOW SET]. The default setting is [ON]
(continuous playback).
28
Connecting to a high definition TV
Images recorded with HD (high definition) image quality are played back with HD (high
definition) image quality. Images recorded with SD (standard definition) image quality are
played back with SD (standard definition) image quality.
: Signal flow
HOME MENU setting
Type Camcorder
Cable
TV
(SETTINGS) t
[OUTPUT SETTINGS]
t [COMPONENT] t
[1080i/576i] (p. 56)
Component A/V cable
(supplied)
(Green) Y
(Blue) PB/CB
(Red) PR/CR
(White)
(Red)
• If you connect only component video, audio signals are not output. Connect the white and red plugs to
output audio signals.
29
: Signal flow
HOME MENU setting
Type Camcorder
Cable
TV
HDMI cable (sold separately)
• Use an HDMI cable with the HDMI logo.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the images.
• Some TVs may not function correctly (e.g., no sound or image) with this connection.
• Do not connect the HDMI OUT jack of your camcorder and HDMI OUT jack of the external device with
the HDMI cable. This may cause a malfunction.
• HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
Connecting to a non-high-definition 16:9 (wide) TV or 4:3 TV
Images recorded with HD (high definition) quality are converted to SD (standard definition)
and played back. Images recorded with SD (standard definition) image quality are played back
with SD (standard definition) image quality.
To set the horizontal to vertical ratio according to the connected TV (16:9/4:3)
Set [TV TYPE] to [16:9] or [4:3] according to your TV (p. 56).
b Notes
• When you play back a movie recorded with SD (standard definition) image quality on a 4:3 TV that is not
compatible with the 16:9 signal, touch
(HOME) t
(SETTINGS) t [MOVIE SETTINGS] t
30
: Signal flow
HOME MENU setting
Type Camcorder
Cable
TV
(SETTINGS) t
[OUTPUT SETTINGS]
t [COMPONENT] t
[576i] (p. 56)
Component A/V cable
(supplied)
(Green) Y
(Blue) PB/CB
(Red) PR/CR
(SETTINGS) t
[OUTPUT SETTINGS]
t [TV TYPE] t [16:9]/
(White)
(Red)
• If you connect only component video, audio signals are not output. Connect the white and red plugs to
output audio signals.
(SETTINGS) t
A/V connecting cable with
S VIDEO (sold separately)
[OUTPUT SETTINGS]
t [TV TYPE] t [16:9]/
(White)
(Red)
(Yellow)
• When the S VIDEO plug (S VIDEO channel) is connected, audio signals are not output. To output audio
signals, connect the white and red plugs to the audio input jack of your TV.
• This connection produces higher resolution images compared with the A/V connecting cable (Type
).
(SETTINGS) t
A/V connecting cable
(supplied)
[OUTPUT SETTINGS]
(Yellow)
(White)
(Red)
t [TV TYPE] t [16:9]/
* Set [TV TYPE] according to your TV.
31
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
You need the 21-pin adaptor (sold
separately) to connect your camcorder to a
TV for viewing recorded images (for
models with the
mark printed on the
bottom surface only). This adaptor is
designed for output use only.
b Notes
• When the A/V connecting cable is used to
output images, images are output with SD
(standard definition) image quality.
z Tips
• If you connect your camcorder to the TV using
more than one type of cable to output images,
the order of priority of the TV input jacks is as
follows:
HDMI t component t S VIDEO t video.
32
Saving images
Recorded images are stored on the “Memory Stick PRO Duo” media. Due to the limited
capacity of the “Memory Stick PRO Duo” media, make sure that you save the image data to
some type of external media such as a DVD-R or a computer.
You can save the images recorded on the camcorder as described below.
Saving images using a computer
By using “PMB” on the supplied CD-ROM, you can save the images recorded on the
“Memory Stick PRO Duo” media.
You can rewrite movies with HD (high definition) image quality from the computer to your
camcorder, if necessary. For details, see “PMB Guide.”
Creating a disc with One Touch (One Touch Disc Burn)
You can save images recorded on the camcorder directly to a disc
with ease.
Saving images on a computer
You can save images recorded on the camcorder on the hard disk of a
computer.
Creating a disc with selected images
You can save images copied to your computer on a disc. You can also
edit those images.
Saving images by connecting your camcorder to other devices
Connecting with the A/V connecting cable
You can dub movies with SD (standard definition) image quality.
Connecting with the USB cable
You can dub movies with HD (high definition) image quality or SD
(standard definition) image quality.
33
Editing (OTHERS) category Deleting images
This category enables you to edit the
images on the “Memory Stick PRO Duo”
media. Also, you can enjoy your camcorder
by connecting to other devices.
You can delete images recorded on the
“Memory Stick PRO Duo” media using
your camcorder.
b Notes
• You cannot restore images once they are deleted.
• Do not remove the battery pack or the AC
Adaptor, or eject “Memory Stick PRO Duo”
media from your camcorder while deleting the
images. It may damage the media.
• When write-protection is set to the images in the
“Memory Stick PRO Duo” media by another
device, you cannot delete the images.
(OTHERS) category
• Important data should besaved on external media
• Donottrytodeletethefilesonthe“MemoryStick
PRO Duo” media in your camcorder using a
computer.
Item list
DELETE
You can delete images on the “Memory
Stick PRO Duo” media (p. 34).
z Tips
• You can select up to 100 images at one time.
• You can delete an image on the playback screen
PHOTO CAPTURE
You can save a selected frame from a
from
(OPTION) MENU.
• To delete all images recorded in the “Memory
Stick PRO Duo” media, and recover all the
EDIT
Deleting movies
PLAYLIST EDIT
You can create and edit a Playlist (p. 38).
You can increase the free space on the
“MemoryStickPRODuo”mediabydeleting
image data.
You can check the free space on the
“Memory Stick PRO Duo” media using
[MEDIA INFO] (p. 45).
PRINT
You can print still images on a connected
Select the image quality of the movie you
want to delete before the operation (p. 44).
USB CONNECT
You can connect the camcorder to a
computer etc., via the USB cable.
1
Touch
(OTHERS) t [DELETE].
(HOME) t
2
3
Touch [
Touch [
DELETE].
DELETE] or
[
DELETE].
34
b Notes
4
5
Touch the movie to be deleted.
• If the deleted movie is included in the Playlist
deleted also from the Playlist.
Deleting still images
1
Touch
(OTHERS) t [DELETE].
(HOME) t
The selected movie is marked with
Press and hold the movie on the LCD
screen to confirm the movie.
.
Touch
to return to the previous
2
3
4
Touch [
Touch [
DELETE].
DELETE].
screen.
Touch
t [YES] t
.
Touch the still image to be
deleted.
To delete all movies at one time
In step 3, touch [
DELETE ALL]/
[
t
DELETE ALL] t [YES] t [YES]
.
To delete all the movies recorded on
the same day at one time
1 In step 3, touch [
DELETE by
The selected still image is marked with
.
date]/[
DELETE by date].
Press and hold the still image on the
LCD screen to confirm the still image.
Touch
screen.
to return to the previous
2 Touch
/
to select the recording
5
Touch
t [YES] t
.
date of the desired movie, then touch
.
The movies recorded on the selected
date are displayed on the screen.
Touch the movie on the LCD screen to
To delete all still images at one time
In step 3, touch [
DELETE ALL] t
confirm the movie. Touch
to the previous screen.
to return
[YES] t [YES] t
.
3 Touch
t [YES] t
.
35
Capturing a still image from a movie
You can save a selected frame from a
recorded movie as a still image. Select the
image quality of the movies to be captured
before the operation (p. 44).
To continue capturing
Touch
, then follow the steps 3 to 4.
To capture a still image from another
movie, touch
then follow the steps 2 to
4.
1
Touch
(HOME) t
To finish capturing
(OTHERS) t [PHOTO CAPTURE].
The [PHOTO CAPTURE] screen
appears.
Touch
t
.
b Notes
• The image size is fixed depending on the image
quality of the movie:
– [
quality
– [
2.1M] with HD (high definition) image
2
3
Touch the movie to be captured.
The selected movie starts playback.
0.2M] in 16:9 (wide) with SD (standard
definition) image quality
– [VGA (0.3M)] in 4:3 with SD (standard
definition) image quality
• The “Memory Stick PRO Duo” media should
have enough free space.
• The recording date and time of captured still
images is the same as the recording date and
time of the movies.
Touch
at the point where
you want to capture.
The movie pauses.
Adjusts the capturing point with more
precision after the capturing point has
• If the movie you are capturing from has no data
code, the recording date and time of the still
image will be the date and time you captured
from the movie.
been selected with
.
Returns to the beginning of the
selected movie.
Play and pause toggles as you touch
.
4
Touch
.
When capturing is finished, the screen
returns to pause.
36
Dividing a movie
• Do not remove the battery pack or the AC
Adaptor, or eject the “Memory Stick PRO Duo”
media from your camcorder while dividing the
movie. It may damage the “Memory Stick PRO
Duo” media.
Select the image quality of the movie you
z Tips
• The images recorded on your camcorder are
called “original.”
• If you divide the original movie, the movie
added to the Playlist will also be divided.
• A slight difference may occur from the point
where you touch
point, as your camcorder selects the dividing
point based on about half-second increments.
and the actual dividing
1
Touch
(OTHERS) t [EDIT].
(HOME) t
2
3
Touch [DIVIDE].
Touch the movie to be divided.
The selected movie starts playback.
4
Touch
at the point where you
want to divide the movie into
scenes.
The movie pauses.
Adjusts the dividing point with more
precision after the dividing point has
been selected with
.
Returns to the beginning of the
selected movie.
Play and pause toggles as you touch
.
5
Touch
t [YES] t
.
b Notes
• You cannot restore movies once they are
divided.
37
Creating the Playlist
The Playlist is a list showing thumbnails of
the movies that you have selected.
The original movies are not changed even if
you edit or delete the movies added to the
Playlist.
Select the image quality of the movie you
want to create, play, or edit a Playlist before
the operation (p. 44).
To add all the movies recorded on the
same day at one time
1 In step 2, touch [
ADD by date].
ADD by date]/
[
The recording dates of movies are
displayed on the screen.
b Notes
• Images with HD (high definition) image quality
and SD (standard definition) image quality are
added to an individual Playlist.
2 Touch
/
to select the recording
1
Touch
(HOME) t
date of the desired movie.
(OTHERS) t [PLAYLIST EDIT].
3 Touch while the selected recording
date is highlighted.
The movies recorded on the selected
date are displayed on the screen.
Touch the image on the LCD screen to
2
3
Touch [
ADD] or [
ADD].
confirm the movie. Touch
to the previous screen.
to return
Touch the movie to be added to
the Playlist.
4 Touch
t [YES] t
.
b Notes
• Do not remove the battery pack or the AC
Adaptor, or eject the “Memory Stick PRO Duo”
media from your camcorder while editing the
Playlist. It may damage the “Memory Stick
PRO Duo” media.
• You cannot add still images to a Playlist.
The selected movie is marked with
Press and hold the movie on the LCD
screen to confirm the movie.
.
• You cannot create a Playlist which contains
both HD (high definition) image quality and SD
(standard definition) image quality.
Touch
to return to the previous
z Tips
screen.
• You can add a movie on the playback screen or
the INDEX screen by touching
(OPTION).
• You can copy the Playlist to a disc as it is, by
using the supplied software.
• You can add a maximum of 999 movies with
HD (high definition) image quality, or 99
movies with SD (standard definition) image
quality to the Playlist.
4
Touch
t [YES] t
.
38
Press and hold the movie on the LCD
screen to confirm the movie.
Playing the Playlist
Touch
screen.
to return to the previous
Select the image quality of the movie you
want to create, play, or edit a Playlist before
the operation (p. 44).
4 Touch
t [YES] t
.
z Tips
• The original movies are not changed even if you
erase the movies from the Playlist.
1
Touch
IMAGES) t [PLAYLIST].
(HOME) t
(VIEW
The Playlist screen appears.
To change the order within the Playlist
1 Touch
(HOME) t
(OTHERS)
t [PLAYLIST EDIT].
2 Touch [ MOVE]/[
MOVE].
3 Select the movie to be moved.
2
Touch the movie you want to play
back.
The Playlist is played back from the
selected movie to the end, then the
screen returns to the Playlist screen.
The selected movie is marked with
.
Press and hold the movie on the LCD
screen to confirm the movie.
Touch
screen.
to return to the previous
To erase unnecessary movies from
the Playlist
4 Touch
.
1 Touch
(HOME) t
(OTHERS)
5 Select the destination with
/
.
t [PLAYLIST EDIT].
2 Touch [ ERASE]/[
ERASE].
To erase all the images from the
Playlist, touch [ ERASE ALL]/
ERASE ALL] t [YES] t
[YES] t
[
.
3 Select the movie to be erased from the
Destination bar
Playlist.
6 Touch
t [YES] t
.
z Tips
• When you select multiple movies, the movies
are moved following the order appearing in the
Playlist.
The selected movie is marked with
.
39
Dubbing to other devices
Connecting with the A/V connecting cable
You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
connected.
b Notes
• Movies recorded with HD (high definition) image quality will be dubbed with SD (standard
definition) image quality.
• To copy a movie recorded with HD (high definition) image quality, install the application software
(supplied) on your computer, and copy the images to a disc in the computer.
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
(Yellow)
IN
IN
(White)
(Red)
(Yellow) (White) (Red)
S VIDEO
VIDEO
AUDIO
VIDEO
AUDIO
Devices with an S VIDEO jack
: Video/Signal flow
Devices without an
S VIDEO jack
VCRs or DVD/
HDD recorders
A A/V connecting cable (supplied)
B A/V connecting cable with S
VIDEO (sold separately)
Connect to input jacks of other devices.
When connecting to another device via
the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (sold separately), higher quality
images can be produced than with an A/
V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable (sold separately). The yellow plug
connection is not necessary. S VIDEO
connection only will not output audio.
40
b Notes
5
When dubbing is finished, stop
the recording device, and then
your camcorder.
• You cannot dub to recorders connected with an
HDMI cable.
• To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, touch
(HOME) t
(SETTINGS) t [OUTPUT SETTINGS] t
[DISP OUTPUT] t [LCD PANEL] (the
To record the date/time and camera settings
• When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
Connecting with the USB cable
Connect your camcorder to a DVD writer,
etc., compatible with movie dubbing via
USB connection, to dub without image
degradation.
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC
manuals supplied with the device to be
connected.
1
2
3
Turn on your camcorder, and
touch (VIEW IMAGES).
Set [TV TYPE] according to the display
device (p. 56).
Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
1
2
Turn on your camcorder.
connecting cable (supplied) 1 or
an A/V connecting cable with S
VIDEO (sold separately) 2.
Connect the (USB) jack and a
DVD writer, etc., with the supplied
USB cable (p. 87).
Connect your camcorder to the input
jacks of the recording device.
[USB SELECT] appears on the screen.
4
Start the playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals
supplied with your recording device for
details.
41
Printing recorded
images
(PictBridge compliant
printer)
You can print out still images using a
PictBridge compliant printer, without
connecting the camcorder to a computer.
3
4
Touch [
USB CONNECT].
Operate the device to be
connected, and start recording.
For details, refer to the instruction
manuals supplied with the device to be
connected.
Connect your camcorder to the AC Adaptor
to obtain power from the wall outlet (wall
Insert the “Memory Stick PRO Duo” media
containing the still images you want to print
into your camcorder.
5
After dubbing is complete, touch
[END] t [YES], then disconnect
the USB cable.
1
2
Turn on your camcorder.
Attention
This camcorder captures high definition
footage in the AVCHD format. Using the
enclosed PC software, high definition
footage can be copied onto DVD media.
However, DVD media containing AVCHD
footage should not be used with DVD based
players or recorders, as the DVD player/
recorder may fail to eject the media and
may erase its contents without warning.
DVD media containing AVCHD footage
may be played on a compatible Blu-ray
Disc™ player/recorder or other compatible
device.
Connect the (USB) jack to the
printer using the USB cable
[USB SELECT] appears on the screen
automatically.
3
Touch [PRINT].
When connection is complete,
(PictBridge connecting) appears on
the screen.
z Tips
• If the [USB SELECT] screen does not appear,
touch
[USB CONNECT].
(HOME) t
(OTHERS) t
You can select a still image on the
screen.
42
• Refer also to the instruction manual of the
printer to be used.
• Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
4
Touch the still image to be
printed.
– Slide the POWER switch to OFF
– Press the
button
(Movie)/
(Still) select
– Disconnect the USB cable from your
camcorder or the printer
• If the printer stops working, disconnect the USB
cable, turn the printer off and on again, and
restart the operation from the beginning.
• You can select only the paper sizes that the
printer can print.
• On some printer models, the top, bottom, right,
and left edges of images may be trimmed. If you
print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.
The selected still image is marked with
.
Press and hold the still image on the
LCD screen to confirm the still image.
Touch
to return to the previous
screen.
• Some printer models may not support the date
printing function. Refer to your printer’s
instruction manual for details.
• The still images described below may not be
printed out:
– The still image edited by a computer
– The still image recorded by other devices
– The still image file exceeding 4 MB
– The still image file larger than 3,680 × 2,760
pixels
5
6
Touch
(OPTION), set the
following options, then touch
.
[COPIES]: Set the number of copies of
a still image to be printed. You can set
up to 20 copies.
[DATE/TIME]: Select [DATE],
[DAY&TIME], or [OFF] (no date/time
printed).
[SIZE]: Select the paper size.
z Tips
If you do not change the setting, go to
step 6.
• PictBridge is an industry standard established
by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.
Touch [EXEC] t [YES] t
The image selection screen appears
again.
.
• You can print a still image on the still image
playback screen from
(OPTION) MENU.
To finish printing
In step 3, touch
on the image selection
screen.
b Notes
• We can guarantee the operation of only models
that are PictBridge compatible.
43
Utilizing Media
(MANAGE MEDIA)
Setting the image
quality
You can select the image quality for
recording/playback/editing on your
camcorder.
category
This category enables you to use the
“Memory Stick PRO Duo” media for
various purposes.
In the default setting, the image quality is
set to HD (high definition).
z Tips
• You can perform recording/playback/editing
operations for the selected image quality. When
you want to change the image quality, select the
image quality again.
(MANAGE MEDIA) category
Item list
1
Touch
(MANAGE MEDIA) t [
SET].
(HOME) t
/
/
SET
You can select the image quality for movies
(p. 44).
The image quality setting screen
appears.
MEDIA INFO
You can display the “Memory Stick PRO
Duo” media information such as the
2
3
Touch the desired image quality.
indicates HD (high definition)
image quality, and
indicates SD
MEDIA FORMAT
You can format the “Memory Stick PRO
Duo” media and recover the recordable free
(standard definition) image quality.
Touch [YES] t
.
The image quality is changed.
REPAIR IMG.DB F.
You can repair the management
information on the “Memory Stick PRO
Duo” media (p. 46).
44
Checking the
“Memory Stick PRO
Duo” media
Deleting all images
(Formatting)
Formatting deletes all the images to recover
recordable free space.
information
To avoid the loss of important images, you
should save them before formatting.
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC
You can check the remaining recordable
approximate free and used space of the
“Memory Stick PRO Duo” media.
1
Insert the “Memory Stick PRO
Duo” media to be formatted into
your camcorder.
1
2
Turn the
(Movie) lamp on.
Touch
(HOME) t
(MANAGE MEDIA) t [MEDIA
INFO].
2
3
Slide the POWER switch to ON to
turn on the camcorder.
The remaining recordable time for each
recording mode is displayed.
Touch
(HOME) t
z Tips
(MANAGE MEDIA) t [MEDIA
FORMAT].
• You can check the recordable free space,
etc. by touching
the screen.
at the lower right on
To turn off the display
Touch
.
b Notes
• The calculation for space available on “Memory
Stick PRO Duo” media is 1MB = 1,048,576
bytes. The fractions less than 1 MB are
discarded when the “Memory Stick PRO Duo”
media space is displayed. Therefore, the
displayed size of the total space available on
“Memory Stick PRO Duo” media, both free and
used, will be slightly smaller than the advertized
size of the “Memory Stick PRO Duo” media.
4
5
Touch [YES] t [YES].
When [Completed.] appears,
touch
.
• Since there is a management file area, the used
space is not displayed as 0 MB even if you
b Notes
• While the access lamp is lit, do not eject the
“Memory Stick PRO Duo” media from your
camcorder.
• Even the still images protected with another
device against accidental deletion are also
deleted.
45
Repairing the image
database file
• Do not attempt the following operations when
[Executing...] is on the screen:
– Operate the POWER switch or buttons
– Eject the “Memory Stick PRO Duo” media
• While [MEDIA FORMAT] is activated, do not
disconnect the AC Adaptor.
This function checks the management
information and the consistency of movies/
still images in the “Memory Stick PRO
Duo” media, and repairs any
inconsistencies found.
1
Touch
(HOME) t
(MANAGE MEDIA) t [REPAIR
IMG.DB F.].
2
Touch [YES].
Your camcorder will check the
management file.
If no inconsistency was found, touch
to finish the operation.
3
4
Touch [YES].
After [Completed.] appears, touch
.
b Notes
• Do not apply mechanical shock or vibration to
your camcorder, and do not remove the AC
Adaptor or the battery pack, or eject “Memory
Stick PRO Duo” media from your camcorder
during the operation.
46
Customizing Your Camcorder
What you can do with the
(SETTINGS)
category of the
HOME MENU
Using the HOME MENU
3
4
5
Touch the desired setup item.
If the item is not on the screen, touch
/
to change the page.
1
Turn on your camcorder, then
touch
(HOME).
(HOME)
Touch the desired item.
If the item is not on the screen, touch
/
to change the page.
Change the setting, then touch
.
(SETTINGS) category
2
Touch
(SETTINGS).
47
List of the
(SETTINGS)
Items
Page
category items
VOLUME
BEEP
Items
Page
LCD BRIGHT
LCD BL LEVEL
LCD COLOR
REC MODE
AE SHIFT
WB SHIFT
WIDE SELECT
DIGITAL ZOOM
AUTO SLW SHUTTR
X.V.COLOR
GUIDEFRAME
ZEBRA
Items
Page
TV TYPE
DISP OUTPUT
COMPONENT
REMAINING SET
SUB-T DATE
DIAL SETTING
INDEX SET
Items
Page
CLOCK SET
AREA SET
SUMMERTIME
LANGUAGE SET
Items
Page
IMAGE SIZE
FILE NO.
GENERAL SET (p. 57)
Items
Page
AE SHIFT
WB SHIFT
GUIDEFRAME
ZEBRA
REC LAMP
CALIBRATION
A.SHUT OFF
CTRL FOR HDMI
DIAL SETTING
Items
Page
DATA CODE
DISPLAY
48
MOVIE SETTINGS
(Items for recording movies)
SD SP (
)
Records in standard quality mode.
(SD 6M (SP)).
SD LP (
)
Increases the recording time (Long Play).
(SD 3M (LP))
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
b Notes
/
• If you record in the LP mode, the quality of
movies may be degraded, or scenes with quick
movements may appear with block noise when
you play back the image.
How to set
z Tips
each recording mode.
The default settings are marked with B.
AE SHIFT
REC MODE (Recording
mode)
Select [ON] to adjust the exposure using
(dark)/
(bright).
You can select a recording quality to record
a movie.
and the setting value appear on the
screen (The default setting is [OFF]).
x For HD (high definition) image
z Tips
• Touch
quality:
if the subject is white or the
BHD FH (
Records in the highest quality mode.
)
backlight is bright, or touch
is black or the light is dim.
if the subject
• You can adjust the automatic exposure level to
brighter or darker when [EXPOSURE] is set to
[AUTO].
(AVC HD 16M (FH))
HD HQ (
)
• You can also adjust the setting manually using
Records in high quality mode.
(AVC HD 9M (HQ))
HD SP (
)
WB SHIFT (White
Balance Shift)
Records in standard quality mode.
(AVC HD 7M (SP))
Select [ON] to adjust the white balance to
HD LP (
)
the desired setting using
/
.
Increases the recording time (Long Play).
(AVC HD 5M (LP))
and the setting value appear on the
screen (The default setting is [OFF]).
x For SD (standard definition) image
z Tips
quality:
• When the white balance is set to a lower value,
images appear bluish, and when set to a higher
value, images appear reddish.
• You can also adjust the setting manually using
BSD HQ (
)
Records in high quality mode.
(SD 9M (HQ)).
49
WIDE SELECT
AUTO SLW SHUTTR
(Auto Slow Shutter)
When recording with SD (standard
definition) image quality, you can select the
horizontal to vertical ratio according to the
TV connected. Refer also to the instruction
manuals supplied with your TV.
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second by setting [AUTO SLW SHUTTR]
to [ON] (The default setting is [OFF]).
B16:9 WIDE
Records images to the full screen on a 16:9
(wide) TV screen.
X.V.COLOR
When recording, set to [ON] to capture
wider range of colors. Various colors such
as the brilliant color of flowers and
turquoise blue of the sea can be more
faithfully reproduced (The default setting is
[OFF]).
4:3 (
)
Records images to the full screen on a 4:3
TV screen.
b Notes
• You cannot set this item when no “Memory
Stick PRO Duo” media is inserted.
b Notes
• Set [TV TYPE] correctly according to the TV
• Set [X.V.COLOR] to [ON] when the recorded
content will be played back on an x.v.Color-
compliant TV.
• If the movie recorded with this function [ON] is
played back on an non-x.v.Color-compliant TV,
the color may not be reproduced correctly.
• [X.V.COLOR] cannot be set to [ON]:
– While recording with SD (standard definition)
image quality
DIGITAL ZOOM
You can select the maximum zoom level in case
you want to zoom to a level greater than 10 ×
during recording. Note that the image quality
decreases when you use the digital zoom.
– While recording a movie
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISPLAY/
BATT INFO to make the frame disappear
(The default setting is [OFF]).
The right side of the bar shows the digital
zooming factor. The zooming zone appears
when you select the zooming level.
BOFF
z Tips
Up to 10 × zoom is performed optically.
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
ZEBRA
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
120 ×
Up to 10 × zoom is performed optically,
and after that, up to 120 × zoom is
performed digitally.
50
setting,
is not recorded.
is displayed. The zebra pattern
SUB-T DATE (Subtitle
date)
BOFF
When you set to [ON] (the default setting),
you can display the recording date and time
while playing back the images recorded on
your camcorder, on devices compatible
with the subtitle display function. Refer
also to the instruction manual of the display
device.
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
• The images recorded with HD (high definition)
image quality can be played back only on
AVCHD format compatible devices.
• [SUB-T DATE] cannot be set for SD (standard
definition) image quality.
b Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
DIAL SETTING
• IRE represents the unit of images brightness
amplitude.
You can select an item you want to set to
the CAM CTRL dial. For details, see page
REMAINING SET
BON
INDEX SET
Always displays the remaining “Memory
Stick PRO Duo” media indicator.
This setting allows you to search for faces
automatically and to display the [Face
[OFF]).
AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
– When your camcorder recognizes the
remaining “Memory Stick PRO Duo”
media capacity while the
lamp lights up
– When you press DISPLAY/BATT INFO
to switch the indicator from off to on
while the
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing
when the face is recorded in the [Face
Index].
:This icon appears when faces cannot
be recorded in the [Face Index].*
(Movie)
(Movie) lamp lights up
– When you select the movie recording
mode on the HOME MENU.
* The number of faces that can be detected is
b Notes
limited.
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
51
PHOTO SETTINGS
(Items for recording still images)
Capacity of the “Memory Stick PRO
Duo” media and the number of
recordable images (Unit: number of
images)*
When the
(Still) lamp lights up:
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
4.0M
2304 × 1728
/
1GB
2GB
4GB
8GB
16GB
475
970
How to set
1900
3850
7700
The default settings are marked with B.
* The number of recordable still images shown is
for the maximum image size of your camcorder.
The actual number of recordable still images is
displayed on the LCD screen during recording
IMAGE SIZE
B4.0M (
)
Records still images clearly (2,304 ×
1,728).
b Notes
3.0M (
)
• When using “Memory Stick PRO Duo” media
made by Sony Corporation. The number of
recordable still images varies depending on the
recording conditions or type of “Memory Stick”
media.
Records still images clearly in the 16:9
(wide) ratio (2,304 × 1,296).
1.9M (
)
Allows you to record more still images in
relatively clear quality (1,600 × 1,200).
• The unique pixel array of Sony’s ClearVid and
the image processing system allow still image
resolution equivalent to the sizes described.
VGA (0.3M) (
)
z Tips
Allows the maximum number of still
images to be recorded (640 × 480).
• You can also use “Memory Stick Duo” media
with a capacity of under 1 GB for recording still
images.
b Notes
• The set image size is effective during the
(Still) lamp turning on.
FILE NO. (File number)
BSERIES
Assigns file numbers in sequence even if
the “Memory Stick PRO Duo” media is
replaced with another one. The file number
is reset when a new folder is created or the
recording folder is replaced with another.
52
VIEW IMAGES SET
(Items to customize the display)
RESET
Assigns file numbers in sequence,
following the largest file number existing
on the current recording “Memory Stick
PRO Duo” media.
AE SHIFT
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
WB SHIFT (White
Balance Shift)
How to set
The default settings are marked with B.
GUIDEFRAME
DATA CODE
During playback, displays the information
(data code) recorded automatically at the
time of recording.
ZEBRA
BOFF
Data code is not displayed.
DIAL SETTING
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
DATE/TIME
ADate
BTime
53
CAMERA DATA
6IMAGES
Displays thumbnails of 6 images.
Movie
12IMAGES
Displays thumbnails of 12 images.
Still image
CSteadyShot off
DBrightness
EWhite balance
FGain
GShutter speed
HAperture value
IExposure
z Tips
• The data code is displayed on the TV screen if
you connect your camcorder to a TV.
• Depending on the “Memory Stick PRO Duo”
media condition, bars [--:--:--] appear.
•
appears on all images recorded with the
camcorder.
•
appears on all images recorded using a flash
with other device.
b Notes
• This camcorder is not equipped with the
camera-shake reduction (SteadyShot) function.
DISPLAY
You can select the number of thumbnails
that appear on the VISUAL INDEX screen.
BZOOM LINK
Change the number of thumbnails (6 or 12)
with the power zoom lever on your
camcorder.
54
SOUND/DISP SET
(Items to adjust the sound and the screen)
LCD BL LEVEL (LCD
backlight level)
You can adjust the brightness of the LCD
screen’s backlight.
BNORMAL
Standard brightness.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
BRIGHT
Brightens the LCD screen.
How to set
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
The default settings are marked with B.
VOLUME
z Tips
• This adjustment does not affect the recorded
images in any way.
Touch
/
to adjust the volume
LCD COLOR
BEEP
You can adjust the color of the LCD screen
BON
with
/
.
A melody sounds when you start/stop
recording, or operate the touch panel.
Low intensity
z Tips
High intensity
OFF
Cancels the melody.
• This adjustment does not affect the recorded
images in any way.
LCD BRIGHT
You can adjust the brightness of the LCD
screen with
/
.
1 Adjust the brightness with
/
.
2 Touch
.
z Tips
• This adjustment does not affect the recorded
images in any way.
55
OUTPUT SETTINGS
(Items for when connecting other devices)
DISP OUTPUT
BLCD PANEL
Shows displays such as the time code on
the LCD screen.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen and the LCD screen.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
b Notes
• The setting of [DISP OUTPUT] may be
changed according to the setting of [CTRL FOR
How to set
COMPONENT
The default settings are marked with B.
Select [COMPONENT] when connecting
your camcorder to a TV with the
component input jack.
TV TYPE
You need to convert the signal depending
on the TV connected when playing back the
image. The recorded images are played
back as following illustrations.
576i
Select when connecting your camcorder to
a TV with the component input jack.
B1080i/576i
B16:9
Select when connecting your camcorder to
a TV that has the component input jack
and is capable of displaying the 1080i
signal.
Select this to view your images on a 16:9
(wide) TV.
16:9 (wide)
images
4:3 images
4:3
Select this to view your images on a 4:3
standard TV.
16:9 (wide)
images
4:3 images
b Notes
• Horizontal to vertical ratio of the image
recorded with HD (high definition) image
quality is 16:9.
56
CLOCK/ LANG
GENERAL SET
(Items to set clock and language)
(Other setup items)
Touch 1, then 2.
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
/
If the item is not on the screen, touch
to change the page.
/
How to set
How to set
The default settings are marked with B.
CLOCK SET
REC LAMP (Recording
lamp)
AREA SET
The camera recording lamp on the front of
your camcorder lights up, as the default
setting is [ON].
You can adjust a time difference without
stopping the clock.
Set your local area using
/
when using
your camcorder in other time zones.
CALIBRATION
SUMMERTIME
You can change this setting without
stopping the clock.
Set to [ON] to move the time forward
1 hour.
A.SHUT OFF (Auto shut
off)
5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
LANGUAGE SET
You can select the language to be used on
the LCD screen.
BNEVER
The camcorder is not automatically turned
off.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot find
your native tongue among the options.
b Notes
• If you change this setting, turn off your
camcorder and turn it on again.
• When you connect your camcorder to a wall
outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
57
CTRL FOR HDMI
(Control for HDMI)
The default setting is [ON], allowing you to
do the playback operation with the remote
commander of your TV by connecting your
camcorder to a “BRAVIA” Sync
compatible TV with the HDMI cable.
z Tips
• If you turn off the TV, your camcorder is turned
off simultaneously.
58
Activating functions using the OPTION MENU
The
OPTION MENU appears just like
the pop-up window that appears when you
right-click the mouse on a computer.
Various available functions are displayed.
3
Change the setting, then touch
.
Using the OPTION MENU
b Notes
• The tabs and items that appear on the screen
depend on the recording/playback status of your
camcorder at the time.
1
While using your camcorder,
touch
(OPTION) on the screen.
• Some items appear without a tab.
(OPTION)
Tab
2
Touch the desired item.
If you cannot find the desired item,
touch another tab to change the page.
If you cannot find the item anywhere,
the function does not work under the
current situation.
59
Recording items on the OPTION
MENU
Viewing items on the OPTION
MENU
Items
*
Page
Items
tab
*
Page
tab
–
61
61
61
62
62
62
63
64
a
a
a
FOCUS
DELETE
–
SPOT FOCUS
TELE MACRO
EXPOSURE
DELETE by date
DELETE ALL
–
–
–
SPOT METER
AE SHIFT
tab
DIVIDE
a
–
a
a
a
SCENE SELECTION
WHITE BAL.
WB SHIFT
ERASE ALL
MOVE
–
a
–
COLOR SLOW SHTR
-- (The tab depends on the situation/No
tab)
a
a
a
a
a
–
28
28
43
43
43
ADD**
tab
ADD**
–
–
–
64
64
64
FADER
ADD by date**
ADD by date**
D.EFFECT
PICT.EFFECT
PRINT
SLIDE SHOW
VOLUME
DATA CODE
SLIDE SHOW SET
ADD
tab
a
a
–
a
–
65
65
65
21
21
REC MODE
BLT-IN ZOOM MIC
MICREF LEVEL
IMAGE SIZE
SELF-TIMER
TIMING
–
a
a
a
a
–
a
–
ADD
ADD by date
ADD by date
COPIES
–
–
RECORD SOUND
*
Items that are included also in the HOME
MENU.
–
DATE/TIME
SIZE
–
a
ERASE
*
Items that are included also in the HOME
MENU.
** Items that are included in the HOME MENU
by a different name.
60
Functions set in the OPTION MENU
• You can also adjust the focus manually using
Items you can set only on the
MENU will be described below.
OPTION
The default settings are marked with B.
SPOT FOCUS
FOCUS
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
1 Touch [MANUAL].
9 appears.
2 Touch
1 Touch the subject on the screen.
9 appears.
2 Touch [END].
(focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus.
appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
To adjust the focus automatically, touch
[AUTO] t [END] in step 1.
b Notes
3 Touch
.
• If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
To adjust the focus automatically, touch
[AUTO] t
in step 1.
TELE MACRO
b Notes
• The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
This is useful to shoot small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
When you set [TELE MACRO] to [ON]
z Tips
(
• It is easier to focus on the subject by moving the
power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle) to
adjust the zoom for recording. When you want
to record a subject at close range, move the
power zoom lever to W (wide angle), then
adjust the focus.
the T (telephoto) side automatically and
allows recording subjects at a close distance
as down to about 36 cm (14 1/4 in.).
• The focal distance information (distance at
which the subject is focused on, if it is dark and
focus adjustment is difficult) appears for a few
seconds in the following cases (This
To cancel, touch [OFF], or zoom to wide-
angle (W side).
information will not display correctly if an
optional conversion lens is being used).
b Notes
• When recording a distant subject, focusing may
be difficult and can take some time.
– when the focus mode is switched from
automatic to manual
• Adjust the focus manually ([FOCUS], p. 61)
when it is hard to focus automatically.
– when you set focus manually
61
b Notes
EXPOSURE
• If you set [SPOT METER], [EXPOSURE] is
automatically set to [MANUAL].
You can fix the brightness of a picture
manually. Adjust the brightness when the
subject is too bright or too dark.
SCENE SELECTION
You can record images effectively in
various situations.
BAUTO
Select to automatically record images
effectively without the [SCENE
SELECTION] function.
1 Touch [MANUAL].
appears.
TWILIGHT* (
)
2 Adjust the exposure by touching
/
Select to maintain the darkening
atmosphere of the distant surroundings in
twilight scenes.
.
3 Touch
.
To return the setting to automatic exposure,
touch [AUTO] t
in step 1.
z Tips
CANDLE ( )
Select to maintain the dim atmosphere of a
candlelit scene.
• You can also adjust the setting manually using
SPOT METER (Flexible
spot meter)
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong
contrast between the subject and the
background, such as subjects in the
spotlight on stage.
SUNRISE&SUNSET* (
Select to reproduce the atmosphere of
scenes such as sunsets or sunrises.
)
FIREWORKS* (
)
Select to take spectacular shots of
fireworks.
1 Touch the point where you want to fix and
adjust the exposure on the screen.
appears.
2 Touch [END].
To return the setting to automatic exposure,
touch [AUTO] t [END] in step 1.
62
LANDSCAPE*(
)
WHITE BAL. (White
balance)
Select to shoot distant subjects clearly.
This setting also prevents your camcorder
from focusing on glass or metal mesh in
windows that comes in between the
camcorder and the subject.
You can adjust the color balance to the
recording environment.
BAUTO
The white balance is adjusted
automatically.
OUTDOOR (
)
PORTRAIT (Soft portrait) (
)
The white balance is adjusted to be
appropriate for the following recording
conditions:
Select to bring out the subject such as
people or flowers while creating a soft
background.
– Outdoors
– Night views, neon signs and fireworks
– Sunrise or sunset
– Under daylight fluorescent lamps
SPOTLIGHT**(
)
INDOOR (n)
Select to prevent people’s faces from
appearing excessively white when subjects
are lit by strong light.
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Indoors
– At party scenes or studios where the lighting
conditions change quickly
BEACH** (
Select to take the vivid blue of the ocean or
a lake.
)
– Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONE PUSH (
)
The white balance will be adjusted
according to the ambient light.
SNOW** (
)
1 Touch [ONE PUSH].
2 Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will shoot
the subject.
Select to take bright pictures of a white
landscape.
3 Touch [
].
flashes quickly. When the white
balance has been adjusted and stored in
the memory, the indicator stops
flashing.
* Adjusted to focus on subjects farther away
only.
**Adjusted not to focus on subjects a short
distance away.
b Notes
b Notes
• If you set [SCENE SELECTION], [WHITE
BAL.] setting is canceled.
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
• When you select [ONE PUSH], keep framing
white objects while
is flashing quickly.
63
•
flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
flashing after touching
to [AUTO].
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
keeps
, set [WHITE BAL.]
• If you set [WHITE BAL.], [SCENE
SELECTION] is set to [AUTO].
STBY
REC
Fading out
Fading in
z Tips
WHITE FADER
BLACK FADER
• If you have changed the battery pack while
[AUTO] was selected, or bring your camcorder
outdoors from inside the house, or vice versa,
select [AUTO] and aim your camcorder at a
nearby white object for about 10 seconds for
better color balance adjustment.
• When the white balance has been set with [ONE
PUSH], if you change the [SCENE
SELECTION] settings, or bring your camcorder
outdoors from inside the house, or vice versa,
you need to redo the [ONE PUSH] procedure to
readjust the white balance.
D.EFFECT (Digital effect)
When you select [OLD MOVIE],
appears and you can add an old movie
effect to images.
COLOR SLOW SHTR
(Color Slow Shutter)
To cancel [D.EFFECT], touch [OFF].
When you set [COLOR SLOW SHTR] to
[ON],
appears, and you can record an
PICT.EFFECT (Picture
effect)
image brighter in color even in dark places.
To cancel, touch [OFF].
You can add special effects to an image
b Notes
during recording.
appears.
• Adjust the focus manually ([FOCUS], p. 61)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
BOFF
Does not use [PICT.EFFECT] setting.
SEPIA
Images appear in sepia.
FADER
B&W (Black and white)
Images appear in black and white.
You can record a transition with the
following effects added to the interval
between scenes.
PASTEL
1 Select the desired effect in [STBY] (to
fading in) or [REC] (to fading out) mode,
then touch
.
Images appear as a pale pastel drawing.
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
64
BLT-IN ZOOM MIC (Built-
in zoom microphone)
When you set [BLT-IN ZOOM MIC] to
[ON] (
), you can record a movie with
directional sound as you move the power
zoom lever (The default setting is [OFF]).
MICREF LEVEL (Microphone
reference level)
You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.
BNORMAL
Records surrounding sounds, converting
them into the appropriate level.
LOW (
)
Records surrounding sounds faithfully.
This setting is not suitable for recording
conversations.
SELF-TIMER
appears when [SELF-TIMER] is set to
[ON].
Press PHOTO to start the count down. A
still image is recorded after about 10
seconds.
To cancel the recording, touch [RESET].
To cancel the self-timer, select [OFF].
65
Enjoying with a computer
Performing with a computer
Application: DirectX 9.0c or later (This
Software to be installed
product is based on DirectX technology.
It is necessary to have DirectX
installed.)
x “PMB” (only for Windows users)
“PMB” is the supplied software. You can
enjoy the following operations.
– Creating a disc with one touch operation
– Importing images to a computer
– Editing imported images
Memory: For Windows XP: 512 MB or
more (1 GB or more is recommended.)
For processing SD (standard definition)
image quality content only, 256 MB of
memory or more is necessary. For
Windows Vista: 1 GB or more
– Creating a disc
b Notes
Hard disk: Disk volume required for
installation: Approximately 500 MB (10
GB or more may be necessary when
creating AVCHD format discs. 50 GB
maximum may be necessary when
creating Blu-ray discs.)
• The supplied software “PMB” is not
supported by Macintosh computers. To use a
Macintosh computer connected to your
camcorder, see the following website for
details.
Display: Minimum 1,024 × 768 dots
Installing “PMB”
Others: USB port (this must be provided
as standard, Hi-Speed USB (USB 2.0
compatible) is recommended), Blu-ray
disc/DVD burner (CD-ROM drive is
necessary for installation)
x System requirements
OS: Microsoft Windows XP SP3*1/
Windows Vista SP1*2
*164-bit editions and Starter (Edition) are
not supported.
Either NTFS or exFAT file system is
recommended as the hard disk file
system.
*2Starter (Edition) is not supported.
Standard installation is required.
Operation is not assured if the above OS has
been upgraded or in a multi-boot
environment.
Attention
This camcorder captures high definition
footage in the AVCHD format. Using the
enclosed PC software, high definition
footage can be copied onto DVD media.
However, DVD media containing AVCHD
footage should not be used with DVD based
players or recorders, as the DVD player/
recorder may fail to eject the media and
may erase its contents without warning.
DVD media containing AVCHD footage
may be played on a compatible Blu-ray
Disc™ player/recorder or other compatible
device.
CPU: Intel Pentium 4 2.8 GHz or faster
(Intel Pentium 4 3.6 GHz or faster, Intel
Pentium D 2.8 GHz or faster, Intel Core
Duo 1.66 GHz or faster, or Intel Core 2
Duo 1.66 GHz or faster is
recommended.)
• Intel Pentium III 1 GHz or faster enables the
following operations:
– Importing the contents to the computer
– One Touch Disc Burn
– Creating a Blu-ray disc/AVCHD format
disc/DVD-video (Intel Pentium 4, 2.8
GHz or faster, is required when creating a
DVD video by converting high definition
image quality (HD) to standard definition
image quality (SD).)
b Notes
• Operation is not assured on all types of
computer environment.
– Copying a disc
66
• You can read images recorded on “Memory
Stick PRO Duo” media in “Memory Stick”
media slot of a computer. However, in the
following cases, do not use the “Memory Stick”
media slot of the computer, but connect your
camcorder to the computer with the USB cable:
– The computer is not compatible with
“Memory Stick PRO Duo” media.
– “Memory Stick Duo” media adaptor is
required.
5 Select the language for the application to
be installed, then click [Next].
6 As the screen to confirm the connection
appears, connect your camcorder to the
computer following the steps below.
1 Connect the AC Adaptor to your
camcorder and a wall outlet (wall
socket).
2 Turn on your camcorder.
3 Connect the (USB) jack of your
camcorder to the computer using the
supplied USB cable.
The [USB SELECT] screen appears on
your camcorder automatically.
– “Memory Stick PRO Duo” media cannot be
read in the “Memory Stick” media slot.
– Reading data from the “Memory Stick” media
slot is slow.
x Installation procedure
If the [USB SELECT] screen does not
You need to install the software to your
Windows computer before connecting
your camcorder to the computer. The
installation is required only for the first
time.
appear, touch
(OTHERS) t [USB CONNECT].
(HOME) t
4 Touch [
USB CONNECT] on the
[USB SELECT] screen of your
camcorder.
Contents to be installed and procedures
may differ depending on your OS.
1 Confirm that your camcorder is not
connected to the computer.
2 Turn on the computer.
b Notes
• Log on as an Administrator for installation.
• Close all applications running on the
computer before installing the software.
7 Click [Continue].
8 Read [License Agreement], and if you
agree, change to then click [Next].
9 Confirm the installation settings, then click
[Install].
3 Place the supplied CD-ROM in the disc
drive of your computer.
The installation screen appears.
0 Follow the on-screen instructions to install
the software.
Depending on the computer, you may need
to install third party software. If the
installation screen appears, follow the
instructions to install the required software.
qa Restart the computer if required to
complete the installation.
If the screen does not appear
1 Click [Start], then click [My
qs Remove the CD-ROM from the disc drive
of your computer.
Computer].
2 Double-click [SONYPICTUTIL (E:)]
(CD-ROM) (disc drive).*
* Drive names (such as (E:)) may vary
depending on the computer.
4 Click [Install].
67
For customers with writable Blu-ray
Disc Drive
You can create a Blu-ray disc. Click [BD
Add-on Software] on the installation screen
and follow the on-screen instructions to
install the update.
b Notes
• You need to install “PMB” beforehand using the
supplied CD-ROM.
To disconnect the USB cable
1 Click the
icon t [Safely remove
USB Mass Storage Device] on the task tray
on the bottom right of the desktop of your
computer.
2 Touch [END] t [YES] on the screen of
your camcorder.
3 Disconnect the USB cable.
To operate “PMB”
To start “PMB,” click [Start] t [All
Programs] t [Sony Picture Utility] t
[PMB].
To see “PMB Guide”
To find out how to use “PMB,” see “PMB
Guide.”
To display “PMB Guide,” click [Start] t
[All Programs] t [Sony Picture Utility]
t [Help] t [PMB Guide].
68
Troubleshooting
Troubleshooting
If you run into any problems using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.
Buttons do not work.
• When the HOLD. switch is set to the
right, be sure to slide the HOLD.
The menu settings have changed
automatically.
• If you remove the battery pack or
disconnect the AC Adaptor while the power
is turned on, the setting cannot be saved.
Your camcorder gets warm.
• Your camcorder may become warm during
operation. This is not a malfunction.
Batteries/Power sources
The power abruptly turns off.
Overall operations
The CHG (charge) lamp does not
light while the battery pack is being
charged.
The power does not turn on.
• Attach a charged battery pack to the
• Attach the battery pack to the camcorder
• Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
• The plug of the AC Adaptor has been
disconnected from the wall outlet (wall
socket). Connect it to the wall outlet (wall
The camcorder does not operate
even when the power is set to on.
The CHG (charge) lamp flashes while
the battery pack is being charged.
• It takes a few seconds for your camcorder
to be ready to shoot after the power is
turned on. This is not a malfunction.
• Attach the battery pack to the camcorder
disconnect the power source and contact
your Sony dealer. The battery pack may be
damaged.
• Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
If the functions still do not work, press the
object (If you press the RESET button, all
settings, including the clock setting, are
reset).
The remaining battery time indicator
does not indicate the correct time.
• The ambient temperature is too high or too
low. This is not a malfunction.
69
• The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
You cannot delete images stored on
or format the “Memory Stick PRO
Duo” media.
• The indicated time may not be correct
depending on the environment of use.
• The maximum number of images that you
can delete at one time is 100.
• You cannot delete the images protected on
another device.
The battery pack is quickly
discharged.
The data file name is not indicated
correctly or flashes.
• The ambient temperature is too high or low.
This is not a malfunction.
• Fully charge the battery again. If the
problem persists, replace the battery pack
• The file is damaged.
• The file format is not supported by your
LCD screen
Recording
Menu items are grayed out.
Refer also to “Memory Stick PRO Duo”
media (p. 70).
• You cannot select grayed items in the
current recording/playback situation.
• There are some functions you cannot
Pressing START/STOP or PHOTO
does not record images.
• The playback screen is displayed. Press the
The buttons do not appear on the
touch panel.
(Movie)/
turn on the
(Still) select button to
(Movie) lamp or (Still)
• Touch the LCD screen lightly.
• Your camcorder is recording the image you
have just shot on the “Memory Stick PRO
Duo” media. You cannot make new
recording during this period.
• The “Memory Stick PRO Duo” media is
full. Use new “Memory Stick PRO Duo”
media or format the “Memory Stick PRO
The buttons on the touch panel do
not work correctly or do not work at
all.
• Adjust the touch panel ([CALIBRATION],
• When the HOLD. switch is set to the
right, be sure to slide the HOLD.
• Total number of movie scenes or still
images exceeds the recordable capacity of
• Moisture condensation has occurred. Turn
off your camcorder and leave it for about 1
• When the HOLD. switch is set to the
right, be sure to slide the HOLD.
“Memory Stick PRO Duo” media
You cannot operate functions using
the “Memory Stick PRO Duo” media.
• If you use “Memory Stick PRO Duo”
media formatted on a computer, format it
70
You cannot record a still image.
The auto focus does not function.
• You cannot record a still image together
with:
– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
• Set [FOCUS] to [AUTO] (p. 61).
• The recording conditions are not suitable
for auto focus. Adjust the focus manually
– [PICT.EFFECT]
The subjects passing by the lens
very fast appear crooked.
The access lamp remains lit or
flashing even when you stop
recording.
• This is called the focal plane phenomenon.
This is not a malfunction. Because of the
way the image device (CMOS sensor) reads
out image signals, the subjects passing by
the lens rapidly might appear crooked
depending on the recording conditions.
• Your camcorder is recording the scene you
have just shot on the “Memory Stick PRO
Duo” media.
The recording angle looks different.
Tiny spots in white, red, blue, or
green appear on the screen.
• The recording angle may look different
depending on the condition of your
camcorder. This is not a malfunction.
• The spots appear when you are recording
with [COLOR SLOW SHTR]. This is not a
malfunction.
The actual recording time for movie
is less than the expected
approximate recording time of the
“Memory Stick PRO Duo” media.
The screen image is dark, and the
subject does not appear on the
screen.
• Depending on the recording conditions, the
time available for recording may be shorter,
for example when recording a fast moving
• Press and hold DISPLAY/BATT INFO for
a few seconds to turn on the backlight
Horizontal stripes appear on the
images.
There is a time difference between
the point where you press START/
STOP and the point that the
• This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
recorded movie starts/stops.
• On your camcorder, there may be a slight
time difference between the point where
you press START/STOP and the actual
point that recording movie starts/stops.
This is not a malfunction.
[COLOR SLOW SHTR] does not
operate correctly.
• [COLOR SLOW SHTR] may not operate
correctly in total darkness.
The horizontal to vertical ratio (16:9
(wide)/4:3) cannot be changed.
You cannot adjust [LCD BL LEVEL].
• You cannot adjust [LCD BL LEVEL] when
the power is supplied from the AC Adaptor.
• The horizontal to vertical ratio of the movie
recorded with HD (high definition) image
quality is 16:9 (wide).
71
Playing back images
Editing images on your
camcorder
An image cannot be found for
playback.
Unable to edit.
• Select the image quality of a movie you
want to play back by touching
• Unable to edit because of the condition of
the image.
(HOME) t
(MANAGE MEDIA) t
[
/
Images cannot be added in the
Playlist.
Images cannot be played back.
• There is no free space in the “Memory
Stick PRO Duo” media.
• Images cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes
in the case of still images.) This is not a
• Images recorded on other devices may not
be played back. This is not a malfunction
• You can add no more than 999 images with
HD (high definition) image quality, or 99
images with SD (standard definition) image
quality, to a Playlist. Erase unnecessary
• You cannot add still images in the Playlist.
A movie cannot be divided.
“
” is indicated on an image in the
• A movie that is too short cannot be divided.
• A movie protected on another device
cannot be divided.
VISUAL INDEX screen.
• This may appear on still images recorded
on other devices, edited on a computer, etc.
• You removed the AC Adaptor or the
battery pack before the access lamp is
turned off after recording. This may
Still images cannot be captured from
a movie.
damage your image data and
displayed.
is
• There is no space on the “Memory Stick
PRO Duo” media to record a still image.
“
” is indicated on an image in the
Viewing on the TV
VISUAL INDEX screen.
You cannot view the image or hear
the sound on the TV.
still appears, delete the image marked with
• When you are using the component A/V
cable, set [COMPONENT] according to the
requirements of the connected device
(p. 56).
• When you are using the component video
plug, make sure the red and white plugs of
the A/V connecting cable are connected
No sound or only a quiet sound is
heard during playback.
• When you record sound with [MICREF
sound may be difficult to hear.
• When using [SMTH SLW REC], set
[RECORD SOUND] to [ON] (p. 21).
• Images are not output from the HDMI OUT
jack, if copyright protection signals are
recorded in the images.
72
• When you are using the S VIDEO plug,
make sure the red and white plugs of the
A/V connecting cable are connected
(p. 31).
“PMB” does not work correctly.
• Quit “PMB” and restart your computer.
Functions that cannot be used
simultaneously
The image appears distorted on the
4:3 TV.
The following list shows examples of
unworkable combinations of functions and
menu items.
• This happens when viewing an image
recorded in the 16:9 (wide) mode on a 4:3
play back the image.
Because of following
Cannot use
settings
Black bands appear at the top and
bottom of the screen of the 4:3 TV.
[SCENE
SELECTION]
[COLOR SLOW
SHTR], [FADER],
[OLD MOVIE], [TELE
MACRO]
• This happens when viewing an image
recorded in the 16:9 (wide) mode on a 4:3
TV. This is not a malfunction.
[ONE PUSH] in
[WHITE BAL.]
[SMTH SLW REC]
Playing the “Memory Stick PRO
Duo” media on other devices
[SPOT FOCUS]
[SCENE SELECTION]
[COLOR SLOW [FADER],
SHTR]
[D.EFFECT], [SCENE
SELECTION]
The device does not play or read the
“Memory Stick PRO Duo” media.
[FADER]
[COLOR SLOW
SHTR], [D.EFFECT],
[CANDLE],
• You can play back the images with HD
(high definition) image quality only on
devices that comply with AVCHD-format.
[FIREWORKS]
[D.EFFECT]
[COLOR SLOW
Dubbing/Connecting to other
devices
SHTR], [FADER],
[SCENESELECTION],
[PICT.EFFECT]
You cannot dub correctly.
[PICT.EFFECT] [OLD MOVIE]
• You cannot dub images using an HDMI
cable.
[TELE MACRO] [SCENE SELECTION]
[AUTO SLW
SHUTTR]
[SMTH SLW REC],
[D.EFFECT], [SCENE
SELECTION],
• The A/V connecting cable is not connected
properly. Make sure to connect to the input
[COLOR SLOW
SHTR], [FADER]
PMB
[WIDE SELECT] [OLD MOVIE]
You cannot install “PMB.”
[MICREF
LEVEL]
[BLT-IN ZOOM MIC]
• Check the computer environment required
to install “PMB.”
[DISP OUTPUT] [CTRL FOR HDMI]
73
Warning indicators and messages
Self-diagnosis display/Warning
indicators
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating
environment or battery conditions, E
may flash, even if there are
If indicators appear on the LCD screen,
check the following.
You can fix some symptoms by yourself. If
the problem persists even after you have
tried to fix a couple of times, contact your
Sony dealer or local authorized Sony
service facility.
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
C:04:00
Fast flashing*
• The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
C:(or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
• Rec stop.
Do not use the main body of your
camcorder under direct sunlight, such
as on the dashboard of a car, etc. Use
your camcorder where the temperature
does not get high.
“InfoLITHIUM” battery pack (H
series). Use an “InfoLITHIUM” battery
• Connect the DC plug of the AC
Adaptor to the DC IN jack of your
(Warning indicator pertaining to
“Memory Stick PRO Duo” media)
C:13:ss / C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
Slow flashing
• Free space for recording images are
running out. For the type of “Memory
Stick” media you can use with your
• No “Memory Stick PRO Duo” media is
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
• A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E”.
Fast flashing
• There are not enough free space for
recording images. Delete unnecessary
images, or format the “Memory Stick
PRO Duo” media after storing the
101-0001 (Warning indicator
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
• The Image Database File is damaged
74
Description of warning
messages
(Warning indicators pertaining to
“Memory Stick PRO Duo” media
formatting)*
If messages appear on the screen, follow the
instructions.
• The “Memory Stick PRO Duo” media
is damaged.
• The “Memory Stick PRO Duo” media
x “Memory Stick PRO Duo” media
Reinsert the Memory Stick.
(Warning indicator pertaining to
incompatible “Memory Stick PRO
Duo” media)*
• Reinsert the “Memory Stick PRO Duo”
media a few times. If even then the
indicator flashes, the “Memory Stick
PRO Duo” media could be damaged.
Try with another “Memory Stick PRO
Duo” media.
• An incompatible “Memory Stick PRO
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick PRO Duo” media)*
This Memory Stick is not
formatted correctly.
• Access to the “Memory Stick PRO
Duo” media was restricted on another
device.
• Check the format, then format the
“Memory Stick PRO Duo” media with
(Warning indicator pertaining to
camera-shake warning)
Memory Stick folders are full.
• You cannot create folders exceeding
999MSDCF. You cannot create or
delete folders using your camcorder.
• Format the “Memory Stick PRO Duo”
folders using your computer.
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the
camcorder steady and record the image.
However, note that the camera-shake
warning indicator does not disappear.
(Warning indicator pertaining to
still image recording)
This Memory Stick may not be able
to record or play movies.
• The “Memory Stick PRO Duo” media
is full.
• Still images cannot be recorded during
processing. Wait for a while, then
record.
• Use the recommended “Memory Stick”
This Memory Stick may not be able
to record or play images correctly.
• Use the recommended “Memory Stick”
* You hear a melody when the warning indicators
• Contact your Sony dealer or local
authorized Sony service facility.
75
Do not eject the Memory Stick during
writing. Data may be damaged.
Cannot recover data.
• Because data writing onto the
“Memory Stick PRO Duo” media
failed, your camcorder tried to recover
the data, but could not recover data.
You may not be able to record or edit
data on the “Memory Stick PRO Duo”
media.
• Insert the “Memory Stick PRO Duo”
media again, and follow the
instructions on the screen.
The Image Database File is
damaged. Do you want to create a
new file?
x PictBridge compliant printer
HD movie management information
is damaged. Create new
information?
Not connected to PictBridge
compatible printer.
• The image management file is
• Turn off the printer and on again, then
remove the USB cable (supplied) and
reconnect it.
damaged. When you touch [YES], a
new image management file is created.
The old recorded images on the
“Memory Stick PRO Duo” media
cannot be played back (Image files are
not damaged). If you perform [REPAIR
information, playing back the old
recorded images may become possible.
If it does not work, copy the image to a
computer using the supplied software.
Cannot print. Check the printer.
• Turn off the printer and on again, then
remove the USB cable (supplied) and
reconnect it.
x Other
No further selection is possible.
Inconsistencies found in Image
Database File. Do you want to repair
the Image Database File?
• You can select only 100 images at one
time for:
– deleting images
The Image Database File is
damaged. Do you want to repair the
Image Database File?
– editing the playlist of HD (high
definition) movies
– printing still images
Inconsistencies found in Image
Database File. Cannot record or play
HD movies. Do you want to repair the
Image Database File?
Data protected.
• You tried to delete data protected on
another device. Release the protection
of the data on the device used to protect
the data.
• The Image Database File is damaged,
and you cannot record movies. Touch
[YES] to repair.
• You can record still images on
“Memory Stick PRO Duo” media.
Recovering data
• Your camcorder tries to recover data
automatically if the data writing was
not performed properly.
76
AFdidiltieonsal/Ifnfoormldatieonr structure on the “Memory Stick
PRO Duo” media
The file/folder structure is shown below. You do not usually need to acknowledge the file/
folder structure, when recording/playing back images on the camcorder. To enjoy still images
or movies by connecting to a computer, see “PMB Guide” on the supplied CD-ROM, then use
the supplied application.
A Image management files
When you delete the files, you cannot
record/play back the images correctly.
The files are defaulted as hidden files
and not usually displayed.
the capacity of a file number exceeds
9999, another folder is created to store
new image files.
The folder name goes up: [101MSDCF]
t [102MSDCF]
B HD movie management
information folder
• By selecting
t [USB CONNECT] t [
(HOME) t
(OTHERS)
USB
This folder contains recording data of
movies with HD (high definition) image
quality. Do not try to open this folder or
access the contents of this folder from a
computer. Doing so might damage
image files, or prevent image files from
being played back.
CONNECT], you can access “Memory Stick
PRO Duo” media in the camcorder from a
computer through USB connection.
• Do not modify the files or folders on “Memory
Stick PRO Duo” media in the camcorder from a
computer. The image files may be destroyed or
may not be played back.
• We (Sony) will not be responsible for the results
of operating the data on “Memory Stick PRO
Duo” media in the camcorder from a computer.
• When you delete image files, follow the steps on
page 34. Do not delete the image files on
“Memory Stick PRO Duo” media in the
camcorder directly from a computer.
• Do not format “Memory Stick PRO Duo” media
in the camcorder using a computer. The
camcorder may not operate correctly.
• Do not copy the files on “Memory Stick PRO
Duo” media in the camcorder from a computer.
We (Sony) will not be responsible for the results
of this kind of operation.
C SD movie files (MPEG2 files)
The extension of the files is “.MPG”.
The maximum size is 2 GB. When the
capacity of a file exceeds 2 GB, the file
becomes divided.
The file numbers go up automatically.
When the capacity of a file number
exceeds 9999, another folder is created
to record new movie files.
The folder name goes up: [101PNV01]
t [102PNV01]
D Still image files (JPEG files)
The extension of the files is “.JPG”. The
file numbers go up automatically. When
77
Maintenance and precautions
*2: 720p specification
About the AVCHD format
What is the AVCHD format?
A high definition specification which utilizes 720
effective scanning lines and the progressive
system.
*3: Data recorded in AVCHD format other than
the above mentioned cannot be played on your
camcorder.
The AVCHD format is a high definition
digital video camera format used to record
an HD (high definition) signal of either the
1080i specification*1 or the 720p
specification*2, using efficient data
compression coding technology. The
MPEG-4 AVC/H.264 format is adopted to
compress video data, and the Dolby Digital
or Linear PCM system is used to compress
audio data.
About the “Memory Stick”
media
“Memory Stick” media is a compact,
portable IC recording medium with a large
data capacity.
You can use only “Memory Stick Duo”
media, which is about the half size of
standard “Memory Stick” media, with your
camcorder.
However, we do not guarantee the
operation of all types of “Memory Stick
Duo” media on your camcorder.
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format. The MPEG-4 AVC/
H.264 format enables a high definition
video signal shot on a digital video camera
recorder to be recorded on 8 cm DVD discs,
internal hard disk drive, flash memory,
“Memory Stick PRO Duo” media, etc.
Recording/
Types of “Memory Stick” media
Playback
“Memory Stick Duo” media
(with “MagicGate”)
—
Recording and playback on your
camcorder
Based on the AVCHD format, your
camcorder records with the HD (high
definition) image quality mentioned below.
In addition to HD (high definition) image
quality, your camcorder is capable of
recording an SD (standard definition) signal
in the conventional MPEG2 format.
“Memory Stick PRO Duo”
(Mark2) media
a
“Memory Stick PRO-HG Duo”
media
a*
* This product does not support 8-bit parallel data
transfer but it supports 4-bit parallel data
transfer the same as with “Memory Stick PRO
Duo” media.
• This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
• “Memory Stick PRO Duo” media formatted by
a computer (Windows OS/Mac OS) does not
have guaranteed compatibility with your
camcorder.
• Data read/write speed may vary depending on
the combination of the “Memory Stick PRO
Duo” media and the “Memory Stick PRO Duo”
media compliant product you use.
Video signal*3:
MPEG-4 AVC/H.264 1920 × 1080/50i,
1440 × 1080/50i
Audio signal:
Dolby Digital 2 ch
Recording media:
“Memory Stick PRO Duo” media
*1: 1080i specification
A high definition specification which utilizes
1,080 effective scanning lines and the interlace
system.
78
• Damaged or lost data may occur in the
following cases (the data will not be
compensated for):
– If you eject the “Memory Stick PRO Duo”
media, or turn off your camcorder while your
camcorder is reading or writing image files on
the “Memory Stick PRO Duo” media (while
the access lamp is lit or flashing).
– If you use the “Memory Stick PRO Duo”
media near magnets or magnetic fields.
• It is recommended you make a back-up of
important data on the hard disk of a computer.
• Be careful not to apply excessive force when
writing on a memo area on “Memory Stick PRO
Duo” media.
• Do not attach a label or the like on “Memory
Stick PRO Duo” media or “Memory Stick Duo”
media adaptor.
is inserted facing in the correct direction, then
insert it all the way in. Note that improper use
may cause a malfunction. Also, if you force the
“Memory Stick PRO Duo” media into the
“Memory Stick Duo” media adaptor in the
wrong direction, it may be damaged.
• Do not insert “Memory Stick Duo” media
adaptor without “Memory Stick PRO Duo”
media attached into “Memory Stick” media
compliant device. Doing so may result in
malfunctions of the device.
x On “Memory Stick PRO Duo” media
• The maximum memory capacity of “Memory
Stick PRO Duo” media that can be used with
your camcorder is 16 GB.
On image data compatibility
• Image data files recorded on “Memory Stick
PRO Duo” media by your camcorder conform
to the “Design rule for Camera File system”
universal standard established by the JEITA
(Japan Electronics and Information Technology
Industries Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• When you carry or store “Memory Stick PRO
Duo” media, put it in its case.
• Do not touch, or allow metallic objects to come
into contact with the terminals.
• Do not bend, drop or apply strong force to the
“Memory Stick PRO Duo” media.
• Do not disassemble or modify the “Memory
Stick PRO Duo” media.
• Do not let the “Memory Stick PRO Duo” media
get wet.
• Keep “Memory Stick PRO Duo” media out of
the reach of small children. There is danger that
a child might swallow it.
• Do not insert anything other than “Memory
Stick PRO Duo” media into the “Memory Stick
Duo” media slot. Doing so may cause a
malfunction.
• If you cannot use “Memory Stick PRO Duo”
media that has been used with another device,
formatting erases all information on the
“Memory Stick PRO Duo” media.
• You may not be able to play back images with
your camcorder:
• Do not use or keep the “Memory Stick PRO
Duo” media in the following locations:
– When playing back image data modified on
your computer.
– Places subject to extremely high temperature,
such as a car parked outside in the summer
– Places under direct sunlight
– When playing back image data recorded with
other devices.
– Places with extremely high humidity or
subject to corrosive gases
About the “InfoLITHIUM”
battery pack
x On the “Memory Stick Duo” media
adaptor
• When using “Memory Stick PRO Duo” media
with “Memory Stick” media compliant device,
be sure to insert the “Memory Stick PRO Duo”
media into “Memory Stick Duo” media adaptor.
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
“InfoLITHIUM” H series battery packs
have the
mark.
• When inserting “Memory Stick PRO Duo”
media into “Memory Stick Duo” media adaptor,
make sure the “Memory Stick PRO Duo” media
79
• Do not expose the battery pack to water. The
battery pack is not water resistant.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an optional AC Adaptor/
charger.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
About the remaining battery time
indicator
• When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the CHG (charge) lamp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.
• The E mark that indicates low battery flashes
even if there are still approximately 20 minutes
of battery time remaining, depending on the
operating conditions or ambient temperature.
About storage of the battery pack
• If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
To use the battery pack effectively
• Battery pack performance decreases when the
ambient temperature is 10 °C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one of the
following to use the battery pack for a longer
time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-FH70/
FH100 (sold separately).
• Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
• To discharge the battery pack on your
camcorder completely, touch
(HOME) t
(SETTINGS) t [GENERAL SET] t
[A.SHUT OFF] t [NEVER] (the default
setting) and leave your camcorder in recording
About battery life
• Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
• Each battery’s life is governed by storage,
operating and environmental conditions.
We recommend using a large capacity battery
pack: NP-FH70/FH100 (sold separately).
• Be sure to turn off your camcorder when not
recording or playing back on your camcorder.
The battery pack is also consumed when your
camcorder is in recording standby or playback
pause.
• Have spare battery packs ready for 2 or 3 times
the expected recording time, and make trial
recordings before making the actual recording.
About handling of your
camcorder
On use and care
• Do not use or store the camcorder and
accessories in the following locations:
80
– Anywhere extremely hot, cold or humid.
Never leave them exposed to temperatures
above 60 °C (140 °F), such as under direct
sunlight, near heaters or in a car parked in the
sun. They may malfunction or become
deformed.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– wash off any liquid that may have contacted
your skin.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
x When not using your camcorder for a
long time
• Periodically turn it on and let it run such as by
playing back or recording images for about 3
minutes.
– Near AM receivers and video equipment.
Noise may occur.
• Use up the battery pack completely before
storing it.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen or the lens may be exposed to direct
sunlight. This damages inside the LCD
screen.
Notes on splash-proof performance
Only this camera conforms to IEC60529
IPX2. Never use the camcorder in the
water. The camcorder main body is not
designed for splash-proof performance, and
do not wet the camcorder main body.
• Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
x Care of this unit
• If this unit is splashed by water or other liquid,
wipe it completely with a dry soft cloth.
Although the camera is splash-proof, leaving the
unit wet may cause it to malfunction.
Clean the unit body with a cloth lightly
moistened with water, and then wipe the
moisture with a dry soft cloth. Do not wash the
unit in running water. Water may seep inside of
the unit due to the water pressure, and it may
damage the unit.
x Usage life of the rubber casings
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
• Keep your camcorder turned off when you are
not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
• When disconnecting the power cord (mains
lead), pull it by the plug and not the cord (lead).
• Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
• Do not use a deformed or damaged battery pack.
• Keep metal contacts clean.
• If the battery electrolytic liquid has leaked:
– consult your local authorized Sony service
facility.
• Rubber casings are used on the camera of this
unit for splash-proof protection. The usage life
of these rubber casings vary depending on
usage. We recommend replacing these rubber
casings once a year to maintain the splash-proof
protection.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder. This may
cause a malfunction to your camcorder.
x If moisture condensation has occurred
Leave your camcorder for about 1 hour
without turning it on.
81
x Note on moisture condensation
Moisture may condense when you bring
your camcorder from a cold place into a
warm place (or vice versa) or when you use
your camcorder in a humid place as
follows:
x On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly. If this happens, follow the
procedure below. It is recommended that
you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor during the operation.
• You bring your camcorder from a ski slope into
a place warmed up by a heating device.
• You bring your camcorder from an air
conditioned car or room into a hot place outside.
• You use your camcorder after a squall or a
shower.
• You use your camcorder in a hot and humid
place.
1 Turn on your camcorder.
2 Touch
t [GENERAL SET] t
(HOME) t
(SETTINGS)
[CALIBRATION].
x How to prevent moisture condensation
When you bring your camcorder from a
cold place into a warm place, put your
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the ambient temperature (after
about 1 hour).
3 Touch “×” displayed on the screen with the
corner of the “Memory Stick PRO Duo”
media or the like 3 times.
Touch [CANCEL] to cancel.
LCD screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
If you did not press the right spot, try the
calibration again.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• While using your camcorder, the LCD screen
and the parts nearby may heat up. This is not a
malfunction.
b Notes
• Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
On handling the casing
To clean the LCD screen
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
• Avoid the following to avoid damage to the
finish:
• The surface of the LCD screen is coated. If
youscratch the surface, the coating may be come
off. Mind the following points when cleaning
and handling it.
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
– Handling the camcorder with above
substances on your hands.
– Use a soft cloth (a cloth for glasses, etc.)
gently to clean the dirt.
– Remove the dust or sand with a blower, etc.
before wiping the dirt.
– The coating may be scratched if you wipe the
screen with a tissue paper, etc.
– If hand grease or hand cream remains on the
screen, the coating comes off more easily.
Wipe it early.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
82
Specifications
About care and storage of the lens
System
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
Video compression format: AVCHD (HD)/
MPEG2 (SD)/JPEG (Still images)
Audio compression format: Dolby Digital 2ch
Dolby Digital Stereo Creator
Video signal: PAL color, CCIR standards
1080/50i specification
Recording format: HD: AVCHD 1080/50i
SD: MPEG2-PS
Still image: Exif Ver.2.2*1
Image device: 3.6 mm (1/5 type) CMOS sensor
Recording pixels (still image, 4:3):
Max. 4.0 mega (2 304 × 1 728) pixels*2
Gross: Approx. 2 360 000 pixels
Effective (movie, 16:9): Approx.
1 430 000 pixels
Effective (still image, 16:9): Approx.
1 490 000 pixels
Effective (still image, 4:3): Approx.
1 990 000 pixels
On charging the pre-installed
rechargeable battery
Lens: Carl Zeiss Vario-Tessar
10 × (Optical), 20 ×, 120 × (Digital)
Filter diameter: 30 mm (1 3/16 in.)
Focal length: F1.8 ~ 2.3
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when your
camcorder turned off. The pre-installed
rechargeable battery is always charged
while your camcorder is connected to the
wall outlet (wall socket) via the AC
Adaptor or while the battery pack is
attached. The rechargeable battery will be
fully discharged in about 3 months if you
do not use your camcorder at all. Use your
camcorder after charging the pre-installed
rechargeable battery.
f=3.2 ~ 32.0 mm (5/32 ~ 1 5/16 in.)
When converted to a 35 mm still camera
For movies*3: 43 ~ 507 mm (1 3/4 ~ 20 in.)
(16:9)
For still images: 38 ~ 380 mm (1 1/2 ~ 15 in.)
(4:3)
Color temperature: [AUTO], [ONE PUSH],
[INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
Minimum illumination: 5 lx (lux) ([AUTO SLW
SHUTTR] [ON], Shutter speed 1/25 sec)
*1 “Exif” is a file format for still images,
established by the JEITA (Japan
Electronics and Information Technology
Industries Association). Files in this
format can have additional information
such as your camcorder’s setting
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
information at the time of recording.
Connect your camcorder to a wall outlet
(wall socket) using the supplied AC
Adaptor, and leave it with the POWER
switch set to OFF for more than 24 hours.
*2 The unique pixel array of Sony’s ClearVid
and the image processing system allow
still image resolution equivalent to the
sizes described.
*3 The focal length figures are actual figures
resulting from wide angle pixel readout.
Input/Output connectors
A/V Remote Connector: Component/video and
audio output jack
HDMI OUT jack: HDMI Connector
USB jack: mini-B
83
LCD screen
Rechargeable battery pack NP-FH60
Image: 6.7 cm (2.7 type, aspect ratio 16:9)
Total dot number: 211 200 (960 × 220)
Maximum output voltage: DC 8.4 V
Output voltage: DC 7.2 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.12 A
Capacity: 7.2 Wh (1 000 mAh)
Type: Li-ion
General
Power requirements: DC 6.8 V/7.2 V (battery
pack)
DC 8.4 V (AC Adaptor)
Design and specifications are subject to change
without notice.
• Manufactured under license from Dolby
Laboratories.
Average power consumption: During camera
recording using the LCD with normal
brightness:
HD: 3.8 W
SD: 3.2 W
Operating temperature: 1 °C to 40 °C (33.8 °F to
104 °F)
Storage temperature: -20 °C to + 60 °C (-4 °F to
+ 140 °F)
Dimensions (approx.): Main body:
81 × 107 × 42 mm
(3 1/4 × 4 1/4 × 1 11/16 in.) (w/h/d) including
the projecting parts, excluding the cable bush
81 × 122 × 47 mm
(3 1/4 × 4 7/8 × 1 7/8 in.) (w/h/d) including
the projecting parts, excluding the cable bush,
and the supplied rechargeable battery pack
and controller hook attached
Camera: 37 × 42.5 × 86.5 mm
(1 1/2 × 1 11/16 × 3 1/2 in.) (w/h/d) including
the projecting parts
Cable length: 2.8 m (9.18 feet)
Mass (approx.): 500 g (1 lb 1 oz) main unit only
580 g (1 lb 4 oz) including the supplied
rechargeable battery pack, controller hook,
and “Memory Stick PRO Duo” media
AC Adaptor
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104 °F)
Storage temperature: -20 °C to + 60 °C (-4 °F to
+ 140 °F)
Dimensions (approx.): 48 × 29 × 81 mm
(1 15/16 × 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
84
On trademarks
Notes on the License
• “AVCHD” and “AVCHD” logotype are
trademarks of Panasonic Corporation and Sony
Corporation.
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
• “Memory Stick,” “
Duo,” “
PRO Duo,” “
,” “Memory Stick
,” “Memory Stick
,”
“Memory Stick PRO-HG Duo,”
“
“
,” “MagicGate,”
,” “MagicGate Memory
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
Stick” and “MagicGate Memory Stick Duo” are
trademarks or registered trademarks of Sony
Corporation.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
• “x.v.Colour” is a trademark of Sony
Corporation.
• “BRAVIA” is a trademark of Sony Corporation.
• “Blu-ray Disc” and the logo are trademarks.
• Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND /
OR
(ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
• HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• Microsoft, Windows, Windows Media,
Windows Vista, and DirectX are either
registered trademarks or trademarks of
Microsoft Corporation in the United States and/
or other countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
SEE <HTTP://MPEGLA.COM>
• Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
• Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United
States and/or other countries.
“C Library,” “Expat,” “zlib,” and “libjpeg”
software are provided in your camcorder. We
provide this software based on license agreements
with their owners of copyright. Based on requests
by the owners of copyright of these software
applications, we have an obligation to inform you
of the following. Please read the following
sections.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®”
are not mentioned in each case in this manual.
Read “license1.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“C Library,” “Expat,” “zlib,” and “libjpeg”
software.
85
On GNU GPL/LGPL applied software
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. Use the
following URL to download it. When
downloading the source code, select DCR-
DVD810 as the model for your camcorder.
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“GPL,” and “LGPL” software.
To view the PDF, Adobe Reader is needed. If it is
not installed on your computer, you can download
it from the Adobe Systems web page:
86
QIduicek Rnetfeirefnyceing parts and controls
The numbers in ( ) are reference pages.
Main body
D
G Speaker
Playback sounds come out from the
speaker. For how to adjust the volume,
see page 24.
87
A RESET button
To remove the controller hook
Raise the edge of the controller hook, then
slide it in the direction of the arrow to
remove the controller hook.
Initializes all the settings, including the
setting of the date and time.
E Controller hook attachment/Tripod
receptacle
You cannot use a tripod when you
attach the controller hook.
To attach the controller hook
Slide the controller hook in the direction of
the arrow until it clicks.
Controller hook
89
Camera
A Built-in microphone
C Tripod receptacle
Attach the tripod (sold separately) to the
tripod receptacle using a tripod screw
(sold separately: the length of the screw
must be less than 5.5 mm (7/32 in.)).
To adhere the cable clamper
Raise the one-touch tape, then wind the
cable around the hook to adhere the one-
touch tape.
One-touch tape
90
Indicators displayed during recording/playback
Recording movies
C Recording status ([STBY] (standby) or
[REC] (recording))
recording mode (FH/HQ/SP/LP) (49)
E Media
F Counter (hour/minute/second)
G Recording remaining time
Recording still images
K Approximate number of recordable still
images and media/During still image
recording
L Recording folder
M Return button
N Playback mode
Viewing movies
O Currently playing movie number/
Number of total recorded movies
R Currently playing still image number/
Number of total recorded still images
S Playback folder
U Data file name
Viewing still images
91
Upper right
Indicators when you made
changes
Indicator
Meaning
Fader (64)
Following indicators appear during
recording/playback to indicate the settings
of your camcorder.
LCD backlight off (13)
Bottom
Upper left
Upper right
Center
Indicator
Meaning
Digital effect (64)
Manual focus (61)
9
SCENE SELECTION
(62)
Bottom
Upper left
n
SPOT METER (62)/
Indicator
Meaning
AE SHIFT (49)
MICREF LEVEL low
(65)
WIDE SELECT (50)
BLT-IN ZOOM MIC
(65)
X.V.COLOR (50)
Face Index (51)
Center
z Tips
Indicator
Meaning
• Indicators and their positions are approximate
and differ from what you actually see.
IMAGE SIZE (52)
• If you play back the image recorded with other
device supporting 5.1ch surround sound,
appears on the upper-left corner of the screen.
Continuous slide show
(28)
Data code during recording
PictBridge connecting
(42)
The recording date and time is recorded
automatically on the “Memory Stick PRO
Duo” media. They are not displayed while
recording. However, you can check them as
E
Warning (74)
92
LCD BL LEVEL
S
P
SD (standard definition) image
M
MANAGE MEDIA category
PMB (Picture Motion Browser)
Pre-installed rechargeable
battery .................................. 83
SPOT METER (Flexible spot
Preventing operation errors
............................................. 20
SUB-T DATE (Subtitle date)
..............................................51
R
REC LAMP
N
Number of recordable pictures
REC MODE
T
O
Operation confirmation beep
REMAINING SET (movie)
............................................. 51
94
U
V
VCR or DVD/HDD recorders
W
WB SHIFT
X
Z
95
|