Sirius Satellite Radio SIRIUS Tabletop Internet Radio TTR1 User Manual |
Sirius
User Guide
Table of Contents
Introduction 5 Appendix: Manual Network
Configuration 65
Features 6
Safety and Care Information 7
What’s in the Box? 9
SiriusXM TTR1 Radio Functions 10
Remote Control 12
Display Screen 13
Troubleshooting 75
Product Specifications 81
Patent Information 83
Environmental Information 83
Installation 15
Introduction 16
Step 1: Connect to a Network 17
Step 2: Enter Your SiriusXM Account
Information 23
Using Your SiriusXM TTR1
Radio 25
Navigation Basics 26
Direct Tune 30
Favorite Channels 31
Alarm Clock 32
Snooze 34
Sleep Timer 35
Parental Control 36
Audio Settings 42
Configuring Your SiriusXM TTR1
Radio 45
SiriusXM setup 46
System Setup 50
3
4
5
Introduction
Features
Thank you for purchasing the SiriusXM TTR1 Radio!
Your new SiriusXM TTR1 Radio comes with everything you need to enjoy SiriusXM
Internet Radio in your home
Use this manual to familiarize yourself with all of your SiriusXM TTR1 Radio
features and capabilities For the latest information about your SiriusXM TTR1
Radio and other SIRIUS and XM products and accessories, visit sirius com and
xmradio com
Please read the entire User Guide before using your SiriusXM TTR1
Radio!
6
Safety and Care Information
IMPORTANT! Always read and understand all the instructions to avoid
injury to yourself and/or damage to your device Sirius XM Radio Inc
disclaims all responsibility for damage from data loss due to breakdown,
repair, or other causes
• Do not expose to extreme temperatures (above 140ûF or below -4ûF, or
above 60ûC or below -20ûC)
• Do not expose to moisture Do not use device near or in water
• Do not let any foreign matter spill into device
• Do not store in dusty areas
• Do not expose to chemicals such as benzene and thinners Do not use
liquid or aerosol cleaners Clean with a soft damp cloth only
• Do not expose to direct sunlight for a prolonged period of time, and do
not expose to fire, flame, or other heat sources
• Do not try to disassemble and/or repair device yourself
• Do not drop your device or subject it to severe impact
• Do not place heavy objects on device
• Do not subject device to excessive pressure
• If the screen is damaged, do not touch the liquid crystal fluid
WARNING!
• Opening the case may result in electric shock
• Make sure that you insert the plug all the way into the outlet
• Do not touch the device with wet hands
• Do not install near any heat sources such as radiators, heat registers,
7
Introduction
stoves, or other apparatus (including amplifiers) that produce heat
• Do not defeat the safety
purpose of the polarized
or grounding type plug A
polarized plug has two blades
with one wider than the other
A grounding type plug has two
blades and a third grounding
prong The wide blade or the
third prong is provided for your
safety When the provided plug
does not fit into your outlet,
consult an electrician for
replacement of the obsolete
outlet
• Protect the power cord
from being walked on or
pinched particularly at plugs,
convenience receptacles, and
the point where they exit from
the apparatus
• This product contains
chemicals known to the State
of California to cause cancer
and birth defects or other
reproductive harm
8
What’s in the Box?
TUNE
VOL
1
2
3
4
5
6
7
8
9
0
BACK
MENU
ALARM
1
ALARM
2
SiriusXM TTR1 Radio
BACK
OK
MUTE
MENU
1
2
6
0
3
7
4
8
5
ALARM
1
ALARM
2
9
Remote Control
9
Introduction
SiriusXM TTR1 Radio Functions
Power Button (page 26)
Turn Radio On and Off
TUNE Knob (Multifunction) (page 26)
Turning the knob at the default display screen displays the
category tune screen; pressing the knob at the default display
screen displays the direct tune screen; turning the knob in a menu
or user input screen scrolls through menus and choices; pressing
the knob in a menu or user input screen selects a highlighted item;
pressing and holding displays the Parental control menu
VOL (Volume) Knob (page 26)
Increases or decreases
volume; also mutes the audio
TUNE
VOL
1
2
3
4
5
6
7
8
9
0
BACK
MENU
ALARM
1
ALARM
2
ALARM 1 / ALARM 2 Buttons
clocks On or Off; pressing and
holding displays the alarm
settings
0-9 Number Buttons
BACK Button (page 27)
MENU Button (page 27)
Press to access or exit
category and channel
tuning, advanced features,
and configuration options
channel presets or
directly enter channel
numbers
previous display
screen
10
Snooze/Sleep Timer Button (page 27)
Mutes the alarm, or sets the
sleep timer, for 5, 10, 15, 30, 45,
or 60 minutes
Wireless Antenna
Headphone Connector
Aux In Connector
Rear Compartment
Wired Ethernet Connector
Line Out Connector
11
Introduction
Remote Control
Power Button
Turn Radio On and Off
Arrow Buttons
Press to scroll through lists;
also highlight menu options
OK Button
Press to select channel
list and menu items
+/— Buttons
Press to increase or
decrease the audio volume
BACK
OK
MUTE
BACK Button
Press to return back to
the previous display
screen
MENU
1
MUTE
Press to silence the audio
MENU Button
2
6
0
3
7
4
8
Press to access or exit
advanced features and
configuration options
5
ALARM 1 / ALARM 2
Press to turn the respective
alarm clock On or Off;
pressing and holding
displays the alarm settings
ALARM
1
ALARM
2
9
0-9 Number Buttons
Set and select channel
presets or directly enter
channel numbers
12
Display Screen
When using the SiriusXM TTR1 Radio, information about songs and artists, and
Radio functions are displayed
Category or Channel
List Screen
Menu Options Screen
Main Display Screen
Current Time
SiriusXM 017
5:23PM
Channel Number
Channel Name
Jam_ON
Artist Name or
Talk Show Host
Network Connection
Type (wireless)
Phish
First Tube
Song Title or
Talk Show Schedule
Signal Strength
(wireless)
Alarm 1/2 On Indicator
1 2
P1
Alarm Audio is Preset
Network Connection
Type (wired)
Snooze
Muted Number
(Favorites)
Countdown
13
14
15
Installation
Introduction
The SiriusXM TTR1 Radio allows you to listen to all of the channels on your
Premium SiriusXM Internet Radio subscription package using either a wireless
Internet connection (Wi-Fi), or using a wired Ethernet connection
You must be subscribed to the Premium SiriusXM Internet Radio service to use
the SiriusXM TTR1 Radio You can add this service to your existing SIRIUS or XM
subscription, or subscribe only to the Premium SiriusXM Internet Radio service
IMPORTANT! If you had previously subscribed to Premium XM Radio Online, you
will need to change your password before using the SiriusXM TTR1 Radio To
the EDIT button to change your password Also, if your user name is less than 6 or
greater than 20 characters, you will need to change it to be between 6 and 20
characters
To subscribe to the SIRIUS service go to sirius com/siriusinternetradio or call
888-539-7474 to subscribe To subscribe to the XM service go to xmradio com/
getxmro or call 800-967-2346 to subscribe When subscribed, you will be provided
with your account user name and password
Once you have subscribed, verify that you are subscribed to the service by
listening online:
• For SIRIUS service go to sirius com Click on the LISTEN ONLINE link, and
then click the LAUNCH ONLINE PLAYER link Enter your user name and
password Select a channel to listen to and then click on the PREMIUM
link If you can listen in the Premium mode, then you are subscribed to the
Premium SiriusXM Internet Radio service
• For XM service go to xmradio com Click on the LISTEN ONLINE NOW link
and then enter your user name and password If you can listen, then you are
subscribed to the SiriusXM Internet Radio service
16
Close the browser window to exit the player before continuing
The SiriusXM TTR1 Radio supports a wireless Internet connection through any
standard 802 11b/g access point This includes wireless networks which are
WEP/WPA/WPA2 protected and require a password, and wireless networks
where the network name (SSID) is hidden Once you have connected to a
wireless network, the Radio will remember your network settings so you will
not have to enter the information again, unless you perform a reset of the
Radio to the factory defaults
Step 1: Connect to a Network
The Network Wizard feature is the easiest way to connect to a wireless
network It searches for available wireless networks and displays a list of
wireless networks found for you to select However, if your wireless network
name (SSID) is hidden, or if your network is DHCP disabled, you’ll have to
manually enter the network settings rather than using the Network Wizard
Decide whether you will be using a wireless network connection, or a wired
network connection, and whether you can use the Network Wizard or if you’ll
need to manually configure your network settings Complete the instructions
in the appropriate section:
17
Installation
To connect to a wireless network using the Network Wizard
If the wireless network is secured, you’ll need to enter the key (password) for
the wireless network during the connection procedure If you don’t know the
password, contact your network administrator of the person who setup the
wireless network
a. If you have just turned your SiriusXM TTR1 Radio on for the first time,
the SSID screen will already be displayed Skip ahead to step e
b. Press MENU and turn the TUNE knob to highlight System Setup Press
the TUNE Knob
c. Turn the TUNE knob to highlight Network Press the TUNE Knob
d. Press the TUNE Knob to select Network Wizard
e. The Radio will scan for wireless networks
SSID
and return with a list of wireless networks
[Wired]
which were found (A sample screen is
Your_Network_Name
shown here Your actual wireless network
Other_Network_Name
[Rescan]
[Manual config]
name will appear in the list, if found ) Turn
the TUNE knob to highlight your wireless
network and press the TUNE knob If you
don’t know the network name, contact
your network administrator of the person
Connected
who set up the wireless network
Connected
f. If you choose an unsecured network, and
ꢀ
the Radio is able to connect to the wireless
network, the Connected screen will be
18
displayed and the Radio will connect to the wireless network Skip
to step h
If you choose a network that is secured, you will be prompted to
enter the key (password) If you don’t know the password, contact
your network administrator of the person who setup the wireless
network Remember that the key is
case sensitive Turn the TUNE knob to
Key:
scroll through the list of characters
and highlight each character
Press the TUNE knob to select the
highlighted character and move to the
next character If you make a mistake,
press BACK, or turn the TUNE knob to
0123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
BKSP
OK
CANCEL
highlight BKSP and press the TUNE knob to erase the character
g. When the key has been entered, turn the TUNE knob to scroll to
highlight OK and press the TUNE knob If you have entered the
correct key, and the Radio is able to
connect to your wireless network, the
Connected screen will be displayed If
Incorrect
you have entered the wrong key, the
Incorrect key screen is displayed, and
you will be prompted to enter the key
again
key
h. If you are installing your SiriusXM TTR1 Radio for the first time,
19
Installation
If you have previously entered your SIRIUS or XM user name and
password into the Radio, and had tuned to a channel, the screen will
show Connecting. When successfully connected, the Buffering... screen
will be displayed as the channel information is streamed to the Radio
When complete, you are returned to the main display screen and you
should hear the audio playing Otherwise, the Category Tune screen is
displayed
3:13PM
SiriusXM
3:14PM
SiriusXM 001
SIRIUS XM Hits 1
SIRIUS XM Hits 1
Connecting.
Buffering...
/
/
20
To connect to a wired network using the Network Wizard:
a. At the rear of the Radio, remove the compartment cover and
connect an Ethernet cable to the Ethernet connector on the inside
compartment cover
b. Connect the other end of the Ethernet cable to your home’s wired
network
c. If you have turned your SiriusXM TTR1 Radio on for the first time, the
SSID screen will already be displayed Skip ahead to step g
d. Press MENU and turn the TUNE knob to highlight System Setup
Press the TUNE Knob
SSID
[Wired]
Some_Network_Name
Other_Network_Name
[Rescan]
e. Turn the TUNE knob to highlight
Network Press the TUNE Knob
f. Press the TUNE Knob to select
Network Wizard
[Manual config]
g. The Radio will scan for networks
When the scan is complete, turn the
TUNE knob to highlight [Wired] and
press the TUNE knob
Connected
Connected
h. If the Radio is able to connect to your
network, the Connected screen will
be displayed If Waiting for Ethernet
ꢀ
21
Installation
is displayed, check the Ethernet cable
connections
Network settings
i. If you are installing your SiriusXM TTR1
Radio for the first time, continue with
Waiting for
Ethernet
If you have previously entered your SIRIUS or XM user name and
password into the Radio, and had tuned to a channel, the screen will
show Connecting. When successfully connected, the Buffering... screen
will be displayed as the channel information is streamed to the Radio
When complete, you are returned to the main display screen and you
should hear the audio playing Otherwise, the Category Tune screen is
displayed
3:14PM
3:13PM
SiriusXM 001
SiriusXM
SIRIUS XM Hits 1
SIRIUS XM Hits 1
Buffering...
Connecting.
/
/
22
Step 2: Enter Your SiriusXM Account Information
The SiriusXM TTR1 Radio needs your account user name and password to
connect to SiriusXM Internet Radio service If are not yet subscribed to the
SiriusXM Internet Radio service, go to sirius.com/siriusinternetradio or call
888-539-7474 to subscribe, or go to xmradio.com/getxmro or call 800-967-
2346 to subscribe, and get your user name and password
IMPORTANT! If you had previously subscribed to Premium XM Radio Online,
you will need to change your password before using the SiriusXM TTR1
Then click on the EDIT button to change your password Also, if your user
name is less than 6 or greater than 20 characters, you will need to change it
to be between 6 and 20 characters
To enter your account information:
a. Turn on the Radio by pressing the
SiriusXM
Power button
Category Tune
SiriusXM Setup
Audio Settings
Parental control
System Setup
>
>
b. Press MENU and turn the TUNE knob
to highlight SiriusXM Setup Press
the TUNE knob
>
c. Turn the TUNE knob to highlight User
name Press the TUNE knob
User name
d. Turn the TUNE knob to scroll through
the list of characters and highlight
each character for your user name
Press the TUNE knob to select the
highlighted character and move to the
0123456789 abcd
efghijklmnopqrs
tuvwxyzABCDEFGH
IJKLMNOPQRSTUVW
BKSP
OK
CANCEL
23
Installation
next character If you make a mistake, press BACK, or turn the TUNE
knob to highlight BKSP and press the TUNE knob to erase the character
e. When you have entered your user name, turn the TUNE knob to scroll to
highlight OK and press the TUNE knob.
f. You will then be prompted to enter your password Enter your password
in the same way as you entered your user name and then select OK
Note that the password is case sensitive
SiriusXM
g. The Radio will attempt to connect to the
SiriusXM Internet Radio service If the
user name and password you entered
is incorrect, the Login failed screen will
be displayed You’ll have to re-enter the
correct user name and password
Login failed
Go to SiriusXM setup
If you have previously connected to a network, and had tuned to a
channel, the screen will show Connecting. When successfully connected,
the Buffering... screen will be displayed as the channel information is
streamed to the Radio When complete, you are returned to the main
display screen and you should hear the audio playing Otherwise, the
Category Tune screen is displayed
3:14PM
3:13PM
SiriusXM 001
SiriusXM
SIRIUS XM Hits 1
SIRIUS XM Hits 1
Buffering...
Connecting.
/
/
24
25
Using Your SiriusXM TTR1 Radio
Navigation Basics
Power Button
The Power button turns the SiriusXM TTR1 Radio On or Off
TUNE
Tune Knob
The TUNE knob is multifunction— you can turn it clockwise or counter-
clockwise, and press it
• Turn: Turning the TUNE knob when at the main display screen displays the
Category tune screen When in menus or user input screens, turning the
TUNE knob scrolls up or down through menus and user choices
• Press and Release: Pressing the TUNE knob at the default display screen
displays the Direct tune screen When in menus or user input screens,
pressing the TUNE knob selects a highlighted item
• Press and Hold: pressing and holding the TUNE knob displays the Parental
control menu options
VOL
VOL Knob
Turning the VOL knob clockwise or counter-clockwise increases or
decreases the volume of the audio When turned counter-clockwise it will mute the
audio when zero is reached
1
0
...
Number Buttons 0-9
The number buttons are used to store favorite channels in a button location so you
can tune a channel just by pressing the button They can also be used to enter the
channel number when at the Direct tune screen
26
BACK
BACK Button
The BACK button returns back to the previously displayed screen
MENU Button
MENU
Pressing the MENU button from the main display screen accesses the
advanced features and configuration options menu, where you can browse the
channel categories and channels, and change the Radio settings Pressing it
when in the configuration options menu returns the Radio to the main display
screen
ALARM 1
ALARM 2
ALARM 1 / ALARM 2 Buttons
Pressing the ALARM button turns the respective alarm clock function On or
Off Pressing and holding the ALARM button displays the respective alarm
setup screen where you can configure the options for each alarm
Snooze / Sleep Button
When the alarm clock is sounding, pressing the Snooze/Sleep button will silence
the alarm for 5 minutes Each additional immediate press of the Snooze/
Sleep button increases the snooze time for 10, 15, 30, 45 or 60 minutes While
snoozing, the snooze countdown time is displayed on the display screen
While the Radio is playing, pressing the Snooze/Sleep button enters the sleep
mode The first press displays Sleep OFF, and each immediate additional
press sets the sleep time for 5, 10, 15, 30, 45 or 60 minutes
While in snooze or sleep mode, the countdown time is displayed on the display
screen You can also check and change the remaining snooze/sleep time by
pressing the Snooze/Sleep button To increase the sleep or snooze time,
repeatedly press the Snooze/Sleep button until the desired sleep/snooze time
is displayed
27
Using Your SiriusXM TTR1 Radio
Listening to SiriusXM Internet Radio
Tune a Channel:
All channels
001-SIRIUS XM Hits 1
002-The Blend
003-SIRIUS XM Love
004-40s on 4
005-50s on 5
1. Press MENU
2. Press the TUNE knob to select Category
Tune
3. Press the TUNE knob to select All
Channels to browse through all the
channels, or turn the TUNE knob to highlight a category Press the
TUNE knob to select the category
4. Turn the TUNE knob browse through the channels, and highlight a
channel to tune Press the TUNE knob to tune the channel The Radio
will momentarily tune the channel
TIP! Go to sirius.com or xmradio.com for the latest SiriusXM Internet Radio
channel lineup
View a Category:
Channels are organized into categories to make it
easier for you to find the ones that suit your taste
Category Tune
All Channels
Pop
>
>
>
>
>
1. To view the categories press MENU
Rock
Dance/Electronic
Hip-Hop/R&B
2. Press the TUNE knob to select Category
28
Tune
Pop
3.
Turn the TUNE knob
to browse through and highlight a
001-SIRIUS XM Hits 1
002-The Blend
003-SIRIUS XM Love
004-40s on 4
category
4.
Press the TUNE knob to
select the category and view the
005-50s on 5
channels in the category
Returning to Main Display Screen
When in the advanced features and configuration options menu, pressing
MENU will return you to the main display screen
29
Using Your SiriusXM TTR1 Radio
Direct Tune
A channel can be tuned directly by entering the channel number
1. From the main display screen, press the
Direct Tune
TUNE button
BKSP
OK
2. Use the 0-9 number buttons on the Radio
or Remote Control to enter the channel
number If you make a mistake, press
BACK, or turn the TUNE knob to highlight
BKSP and press the TUNE knob erase the
character
CANCEL
3. When the channel number is entered, turn the TUNE knob to highlight
OK Press the TUNE knob to tune the channel
30
Favorite Channels
You can assign up to 10 of your favorite channels to a number button (0-9) so
you can easily tune them
To assign a favorite channel to a number button:
1. Tune to the channel you want as a
favorite
Preset stored
2. Press and hold a number button (0-9)
ꢀ
for one second to assign the channel as
a favorite (preset) to that button
IMPORTANT! If the button you choose already has a favorite channel
assigned to it, it will be replaced with the new favorite channel
To tune a favorite channel:
1. Press the number button 0-9 that is assigned to the favorite
channel The channel will momentarily be tuned
31
Using Your SiriusXM TTR1 Radio
Alarm Clock
Your SiriusXM TTR1 Radio has two alarm clocks which
can be configured according to your liking When the
Radio is off, and the alarm(s) are on, the times of each
alarm are displayed on the screen
4:54
AM
1
2
Before you configure the alarm clock, refer to “Clock
Setup” on page 53 and ensure that the Time Zone and
Daylight Savings Time are set correctly
To turn the alarm clocks On or Off:
SiriusXM 007
6:49PM
1. Press the ALARM 1 or ALARM 2 button
to toggle the alarms On or Off If the
SIRIUS XM Love
will
Michael Bolton
1
2
alarm(s) are On, the alarm icon(s)
be displayed in the lower left of the main
That’s What Love Is All A
display screen
1
2
To configure an alarm clock:
1. Press MENU You can also press and hold the alarm button that you want
to configure to go directly to the alarm
configuration (go to step 4)
Alarms
Alarm 1: On [6:30AM]
Alarm 2: Off [8:00AM]
2. Turn the TUNE knob to scroll to and
highlight System Setup Press the TUNE
knob
3. Turn the TUNE knob to scroll to and
highlight Alarms Press the TUNE knob
32
4. The Alarms screen summarizes each alarm clock setting To
configure an alarm, turn the TUNE knob to scroll to and highlight
Alarm 1 or Alarm 2 Press the TUNE knob
5. Each alarm has 5 configuration options which are summarized in
the following table at the beginning of this section To change an
option, turn the TUNE knob to scroll to and highlight the option
Press the TUNE knob to configure the option
Enable
Off
Daily
Once
Weekends
Weekdays
Alarm 1
Enable: Daily
Time: 6:30AM
Wake to: SiriusXM
Preset: Last listened
Volume: 5
Time
12:00 AM - 11:59 PM
Wake to SiriusXM
Buzzer
Preset
Last listened (last channel tuned)
Any favorite channel (1 - 10)
Volume
1 - 20
6. Turn the TUNE knob to scroll to and highlight a setting for each
option Press the TUNE knob to select the setting Continue until
you have configured all the options for
the alarm
7. When you are done, press Alarm 1 or
Alarm 2, or any button, to save the
alarm setting
Alarm
Saved
ꢀ
33
Using Your SiriusXM TTR1 Radio
Snooze
When the alarm sounds, pressing the Sleep/Snooze button will silence the alarm
for a period of time After the snooze time elapses, the alarm will sound again
To snooze:
1. Press the Snooze/Sleep button on the
top of the Radio The Radio will display a
snooze time of 05 minutes
Set snooze time
05 minutes
2. Each immediate subsequent press of the
Snooze/Sleep button increases the snooze
time to 10, 15, 30, 45, or 60 minutes
3. For the snoozing alarm, a countdown timer
is displayed showing how many minutes
are remaining before the alarm sounds
again The alarm icon will also blink for the
snoozing alarm
5:30
AM
1
2
4. You can also check and change the
remaining snooze time by pressing the
Snooze/Sleep button To increase the snooze time, repeatedly press the
Snooze/Sleep button until the desired snooze time is displayed
34
Sleep Timer
The sleep timer turns the Radio off after a period of time as you fall asleep
The time can be set to turn the Radio off after 5, 10, 15, 30, 45, or 60 minutes
To turn the sleep timer On:
Set sleep time
1. Press the Snooze/Sleep button on
the top of the Radio The Radio will
display a sleep time of 05 minutes
05 minutes
2. Each subsequent press of the Snooze/
Sleep button increases the sleep time
to 10, 15, 30, 45, or 60 minutes
SiriusXM 016
3:21PM
3. A countdown timer is displayed at the
bottom of the screen showing how
many minutes are remaining before
the Radio turns off
Deep Tracks
Eric Clapton & B.B. King
Key to the Highway
4. You can also check and change the
remaining sleep time by pressing the Snooze/Sleep button To
increase the sleep time, repeatedly press the Snooze/Sleep button
until the desired sleep time is displayed
Set sleep time
To turn the sleep timer Off:
1. Repeatedly press the Snooze/Sleep
button on the top of the Radio until
Off is displayed
Sleep OFF
35
Using Your SiriusXM TTR1 Radio
Parental Control
Your SiriusXM TTR1 Radio has a parental control feature which will allow you to
lock access to channels A 4-digit code controls access to the locked channel or
locked category
Lock channels
100-Howard 100
101-Howard 101
When you browse a category, the locked channel will
have an L displayed to the right of the channel name
L
L
If you attempt to tune to a locked channel, either by
using direct tune or through the category list, you’ll be 103-Blue Collar Radio
102-SIRIUS XM Stars
104-Raw Dog Comedy
L
prompted to enter your 4-digit code When the correct
code is entered, you’ll be able to tune to the channel
All locked channels become unlocked and will remain unlocked until you turn the
Radio Off, and back On
If the Radio is turned off while listening to a locked
channel, the next time you turn the Radio on, you will
be prompted to enter your lock code If you cancel, and
do not enter your lock code, the channel will display
Parental locked
SiriusXM 101
11:14AM
Howard 101
Parental locked
1
To change the parental lock code:
The SiriusXM TTR1 Radio has a default lock code of 1111 The first time you change
the lock code, you’ll need to enter this code during the procedure
1. Press MENU You can also press and hold the TUNE knob to go directly
to parental control (go to step 3)
2. Turn the TUNE knob to scroll to and highlight Parental control Press
the TUNE knob
36
3. Turn the TUNE knob to highlight Change lock code. Press the
TUNE knob
4. You will be prompted to enter the original lock code If this is the
first time you are changing the lock code, enter 1111, otherwise
enter your existing lock code Use the 0-9 number buttons on the
Radio or Remote Control to enter the
lock code If you make a mistake, turn
Enter orginal code
the TUNE knob to highlight BKSP and
BKSP
OK
press the TUNE knob to erase the
character When you have selected all
4 digits of your code, turn the TUNE
knob to highlight OK and press the
TUNE knob
CANCEL
5. You will be prompted to enter the new code Enter the new code
you desire in the same way When you have selected all 4 digits
of your code, turn the TUNE knob to highlight OK and press the
TUNE knob.
6. You will be prompted to enter the new code again Enter the new
code again in the same way When you have selected all 4 digits
of your code, turn the TUNE knob
to highlight OK and press the TUNE
Category Tune
New code saved
knob.
ꢀ
7. If you have entered your new code
correctly, New Code Saved will be
displayed
8. Press MENU to exit
37
Using Your SiriusXM TTR1 Radio
To turn Parental control Off:
1. Press and hold the TUNE knob
2. Lock/Unlock will be highlighted Press the TUNE knob
3. You will be prompted to enter your 4-digit lock code Use the 0-9
number buttons on the Radio or Remote
Control to enter the lock code If you make
Enter lock code
a mistake, turn the TUNE knob to highlight
BKSP
BKSP and press the TUNE knob to erase
the character When you have selected all
4 digits of your code, turn the TUNE knob
to highlight OK and press the TUNE knob.
OK
CANCEL
4. If you have entered the correct code, the parental lock is turned off If
you entered an incorrect code, Parental lock code mismatch message
will be displayed, and the channels will remain locked
Category Tune
SiriusXM
Parental lock code
Parental lock is off
mismatch
ꢀ
38
To lock or unlock channels:
1. Press and hold the TUNE knob
2. Turn the TUNE knob to scroll through the list and highlight Lock
channels. Press the TUNE knob
3. If parental control is On (locked), you will be prompted to enter
your 4-digit code, otherwise skip to step 4 Use the 0-9 number
buttons on the Radio or Remote
Control to enter the lock code If you
Enter lock code
make a mistake, turn the TUNE knob
to highlight BKSP and press the
TUNE knob to erase the character
When you have selected all 4 digits of
your code, turn the TUNE knob to
highlight OK and press the TUNE knob.
BKSP
OK
CANCEL
4. When you have successfully unlocked parental control, a list of all
the channels will be displayed Turn
the TUNE knob to scroll through the
list and highlight a channel that you
Lock channels
100-Howard 100
101-Howard 101
102-SIRIUS XM Stars
103-Blue Collar Radio
104-Raw Dog Comedy
L
L
wish to lock Press the TUNE knob
to lock the channel An L will be
displayed to the right of the channel
name indicating that the channel is
locked
L
39
Using Your SiriusXM TTR1 Radio
To unlock a channel, highlight a locked channel and press the TUNE
knob The L lock indicator will be removed
indicating that the channel is unlocked
Parental lock
Save parental
lock list?
5. Continue to lock or unlock channels until
you are done When complete, press MENU
You will be prompted to save the parental
lock list Turn the TUNE knob to highlight
YES
No*
YES and press the TUNE knob
Category Tune
6. A confirmation screen will be displayed
Press MENU to exit
Locked channels
saved
ꢀ
To listen to a locked channel:
When you tune to a locked channel, the channel will display Parental locked and no
audio will play until you have unlocked the channel
1. Select the locked channel which will display Parental locked
Enter lock code
2. Press the TUNE knob
3. Use the 0-9 number buttons on the Radio
or Remote Control to enter the lock code
If you make a mistake, turn the TUNE knob
to highlight BKSP and press the TUNE
BKSP
OK
CANCEL
40
knob to erase the character When you have selected all 4 digits of
your code, turn the TUNE knob to highlight OK and press the
TUNE knob
Category Tune
4. If you have entered the correct lock
code, the channel will begin playing
Parental lock is off
Once you have unlocked one channel, all locked
ꢀ
channels become unlocked and will remain
unlocked until you turn the Radio Off The next
time you turn the Radio On, all channels will be
locked
41
Using Your SiriusXM TTR1 Radio
Audio Settings
In the Audio Settings menu option, you can adjust the equalization profile of the
Radio (EQ) to adjust for room acoustics and your listening pleasure The profiles
for equalization are Flat, Loudness, Bass Boost,
Audio Settings
EQ Profiles
Bright, and Vocal Boost
>
Spatialization
Another audio settings adjustment option is
spatialization Spatialization makes the Radio sound
like it is in a three-dimensional environment By
default, spatialization is on, but can be turned off
To change the equalization profile:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight Audio Settings Press the
TUNE knob
3. Press the TUNE knob to select EQ Profiles
4. The currently selected profile will be
denoted with an asterisk Turn the
TUNE knob to scroll to and highlight the
equalization profile desired, and press the
TUNE knob The Radio will change to the
new equalization profile
Audio Settings
Flat
Loudness
Bass Boost
Bright
*
Vocal Boost
5. Press MENU to exit
42
To turn spatialization on or off:
1. Press MENU
2. Turn the TUNE knob to scroll to and
highlight Audio Settings Press the
TUNE knob
Spatialization
Spatialization
3. Turn the TUNE knob to scroll to and
highlight Spatialization Press the
TUNE knob
ON*
OFF
4. Turn the TUNE knob to highlight ON
or OFF and press the TUNE knob
5. Press MENU to exit
43
44
45
Configuring Your SiriusXM TTR1 Radio
SiriusXM setup
The SiriusXM Setup menu option allows you to configure your user name and
password for the SiriusXM Internet Radio service
You can also check the status of your connection
SiriusXM Setup
User name
Password
Status
If are not yet subscribed to the SiriusXM Internet
Radio service, go to sirius.com/siriusinternetradio
or call 888-539-7474 to subscribe, or go to
xmradio.com/getxmro or call 800-967-2346 to
subscribe, and get your user name and password
IMPORTANT! If you had previously subscribed to Premium XM Radio Online, you
will need to change your password before using the SiriusXM TTR1 Radio To
the EDIT button to change your password Also, if your user name is less than 6
or greater than 20 characters, you will need to change it to be between 6 and 20
characters
To verify that you are subscribed to the service, listen online:
• For SIRIUS service go to sirius.com, Click on the LISTEN ONLINE link, and
then click the LAUNCH ONLINE PLAYER link Enter your user name and
password Select a channel to listen to and then click on the PREMIUM
link If you can listen in the Premium mode, then you are subscribed to the
Premium SiriusXM Internet Radio service
• For XM service go to xmradio.com Click on the LISTEN ONLINE NOW link
and then enter your user name and password If you can listen, then you
are subscribed to the SiriusXM Internet Radio service
Close the browser window to exit the player before continuing
46
User name and Password
This option allows you to enter your user name and password for the
SiriusXM Internet Radio service If for any reason your user name or
password should change after you had entered the information into the
Radio, use these procedures to re-enter your user name and password
To enter your user name:
1. Press MENU
User name
2. Turn the TUNE knob to scroll to and
0123456789 abcd
efghijklmnopqrs
tuvwxyzABCDEFGH
IJKLMNOPQRSTUVW
highlight SIRIUS setup Press the
BKSP
OK
TUNE knob
3. User name will be highlighted Press
CANCEL
the TUNE knob
4. Turn the TUNE knob to scroll through the list of characters and
highlight each character for your user name Press the TUNE
knob to select the highlighted character and move to the next
character If you make a mistake, turn the TUNE knob to highlight
BKSP and press the TUNE knob erase the character
5. When you have entered your user name, turn the TUNE knob to
scroll to highlight OK and press the TUNE knob.
6. You’ll now be prompted to enter your password Continue with the
step 4 in next section, and enter your password
To enter your password:
1. Press MENU
47
Configuring Your SiriusXM TTR1 Radio
2. Turn the TUNE knob to scroll to and highlight SIRIUS setup Press the
TUNE knob
3. Turn the TUNE knob to scroll to and highlight Password Press the
TUNE knob
4. Turn the TUNE knob to scroll through the list of characters and
highlight each character for your password
The password is case sensitive Press
Password
the TUNE knob to select the highlighted
0123456789 abcd
efghijklmnopqrs
tuvwxyzABCDEFGH
IJKLMNOPQRSTUVW
BKSP
OK
character and move to the next character
If you make a mistake, turn the TUNE knob
to highlight BKSP and press the TUNE
knob erase the character
CANCEL
5. When you have entered your user name, turn the TUNE knob to scroll to
highlight OK and press the TUNE knob.
6. The Saved screen will be displayed If you have correctly entered the
information, the Radio will display the Connecting... and then the
Buffering... screens If your user name or password is incorrect, the
Login failed screen will be displayed
3:14PM
SiriusXM 001
SiriusXM
Login failed
SIRIUS XM Hits 1
Buffering...
Go to SiriusXM setup
/
48
Status
The Status screen shows the current status of your Premium SiriusXM
Internet Radio service, the user name you are using, and the bit rate of your
connection
To display the status:
1. Press MENU
Status
2. Turn the TUNE knob to scroll to and
highlight SIRIUS setup Press the
TUNE knob
Active
User name:
your_user_name
Bit rate:
HIGH
3. Turn the TUNE knob to scroll to and
highlight Status Press the TUNE
knob
4. The Status screen will be displayed Press MENU to exit
49
Configuring Your SiriusXM TTR1 Radio
System Setup
The System Setup menu option offers the following menu items:
SiriusXM
AUX in
Alarms
Alarm 1:
Alarm 2:
Brightness
Clock Setup
Set Time/Date
Auto Update
Time Zone
Daylight savings
Network
Network wizard
View settings
Manual Settings
Network profile
Factory reset
Software update
System Setup
SiriusXM
AUX in
Alarms
Brightness
Clock Setup
>
Check now
Info
Refer to the sections following for each menu option
50
SiriusXM and AUX in
These two menu options select what the Radio will play SiriusXM selects
the SiriusXM Internet Radio service to be played, and AUX in selects the
auxiliary input to be played You can connect a CD or MP3 player to the AUX
In connector, and listen to it
To select auxiliary in to be played:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup
Press the TUNE knob
3. Turn the TUNE knob to scroll to and
highlight AUX in Press the TUNE
knob
Auxiliary input
7:14PM
Audio In
4. The Auxiliary input screen will be
displayed, and the Radio will play the
input from the AUX In connector
To switch from AUX in to SiriusXM:
1. Press MENU
AUX in
EQ Profiles
System Setup
2. Turn the TUNE knob to scroll to and
highlight System Setup Press the
TUNE knob
>
3. SiriusXM will be highlighted Press
the TUNE knob
4. The Radio will switch back to SiriusXM
and connect to the SiriusXM Internet Radio service
51
Configuring Your SiriusXM TTR1 Radio
Alarms
the clock is set correctly, i e , the Time Zone and Daylight Savings Time are set
the snooze function
Brightness
Brightness has four settings to set the brightness of the display screen,
Automatic, High, Medium, and Low The Automatic setting adjusts the brightness
of the display screen according to the background light in the room, automatically
dimming the display screen the darker the room
To change the display screen brightness:
1. Press MENU
Brightness
2. Turn the TUNE knob to scroll to and
highlight System Setup Press the TUNE
Automatic
knob
3. Turn the TUNE knob to scroll to and
highlight Brightness Press the TUNE
knob
4. Turn the TUNE knob to display your desired setting, Automatic, High,
Medium, or Low Press the TUNE knob to select your setting
52
Clock Setup
Clock Setup allows you to change the clock settings:
• Set Time/Date - Change the time and/or
Clock Setup
date
Set Time/Date
Auto Update
Time Zone
• Auto Update - Synchronize the clock via
the Internet Yes or No Yes is the default
and preferred setting The Radio will
automatically update the time, keeping it
accurate
>
Daylight savings
• Time Zone - Select the time zone you are in
• Daylight savings - Turn daylight savings time On or Off
To set the time and date:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup
Press the TUNE knob
Set Time/Date
3. Turn the TUNE knob to scroll to and
highlight Clock Setup Press the
TUNE knob
07-20-2009
4. Set Time/Date will be highlighted
11:39 AM
Press the TUNE knob
5. Turn the TUNE knob to select the desired hour, and press the
TUNE knob to advance to the next field Continue doing this until
you have finished
53
Configuring Your SiriusXM TTR1 Radio
To set Auto Update:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press the
TUNE knob
3. Turn the TUNE knob to scroll to and highlight Clock Setup Press the
TUNE knob
4. Turn the TUNE knob to scroll to and
Auto Update
highlight Auto Update Press the TUNE
knob
Sync. Time
Via Internet?
5. Turn the TUNE knob to select either YES
or NO, and press the TUNE knob
YES*
NO
6. Press MENU to exit
To set your time zone:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press the
TUNE knob
3. Turn the TUNE knob to scroll to and highlight Clock Setup Press the
TUNE knob
4. Turn the TUNE knob to scroll to and highlight Time Zone Press the
TUNE knob
54
5. Turn the TUNE knob to scroll to and highlight the time zone you
are in Press the TUNE knob
Time Zone
Eastern
Central
Mountain
Pacific
Alaska
>
6. Press MENU to exit
To set daylight savings time:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup
Press the TUNE knob
3. Turn the TUNE knob to scroll to and highlight Clock Setup Press
the TUNE knob
4. Turn the TUNE knob to scroll to and
Daylight savings
highlight Daylight savings Press the
TUNE knob
Daylight savings
5. Turn the TUNE knob to select either
ON or OFF, and press the TUNE knob
ON
OFF*
6. Press MENU to exit
55
Configuring Your SiriusXM TTR1 Radio
Network
Network allows you to view and change the network settings:
• Network wizard - Helps you to easily connect
to a network
Network settings
Network wizard
View settings
Manual Settings
Network profile
• View settings - Displays information about
your network connection
>
• Manual Settings - Allows you to manually
setup your connection to a network
• Network profile - Displays the wireless network connections saved in the
Radio
Each Network menu option is discussed in the sections which follow
Network Wizard:
IMPORTANT! To connect to a wireless network which restricts access by MAC
address, the MAC address of the SiriusXM TTR1 Radio must be added to the
allowed list of MAC addresses in the access point before connecting You can find
the MAC address of your Radio by pressing MENU, then turning and pressing the
TUNE knob to highlight and select: System Setup
Network
View settings
The MAC address of the SiriusXM TTR1 Radio will be displayed
Refer to one the following sections for detailed instructions on using the Network
Wizard to connect to a network:
56
View settings:
View settings displays information about your network connection, including
the type of connection, the status, the Radio’s MAC address, and other
network connection details such as IP addresses
To view the network settings:
1. Press MENU
View settings
Active connection:
WLAN is active
MAC address:
00:00:00:00:00:00
Wlan region:
2. Turn the TUNE knob to scroll to and
highlight System Setup Press the
TUNE knob
3. Turn the TUNE knob to scroll to and
highlight Network Press the TUNE
knob
4. Turn the TUNE knob to scroll to and highlight View settings
Press the TUNE knob
5. Turn the TUNE knob to scroll through the network settings
6. Press MENU to exit
57
Configuring Your SiriusXM TTR1 Radio
Manual Settings:
Refer to one the following sections for detailed instructions on using the Manual
Settings to connect to a network:
Network profile:
Network profile
Network profile displays the wireless network
Your_Network_Name
*
connections which are stored in the Radio when you
Some_Other_Network
connect to a wireless network The currently active
profile is denoted with a “ “ You can delete the
*
profiles if desired
To view and delete the network profiles:
Note that you cannot delete the active wireless network profile
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press the
TUNE knob
58
3. Turn the TUNE knob to scroll to and highlight Network Press the
TUNE knob
4. Turn the TUNE knob to scroll to and highlight Network profile
Press the TUNE knob
5. The saved wireless network names will be displayed If you wish to
delete a profile, turn the TUNE knob
to scroll to and highlight a profile
name Press the TUNE knob
Confirm delete
Confirm delete
6. Confirm that you really want to delete
the profile Turn the TUNE knob to
highlight YES or NO and press the
TUNE knob
YES
NO*
7. Press MENU to exit
59
Configuring Your SiriusXM TTR1 Radio
Factory reset
Factory reset restores the SiriusXM TTR1 Radio to the factory settings It will
erase all the stored network settings, account user name and password, favorite
channels, alarm clock settings, lock code, and set all other options back to the
factory settings
To restore the Radio to the factory settings:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press the
TUNE knob
3. Turn the TUNE knob to scroll to and highlight Factory reset Press the
TUNE knob
Factory reset
4. Confirm that you really want to proceed
with the factory reset Turn the TUNE
Proceed?
knob to highlight YES or NO and press the
TUNE knob
YES
NO*
5. The screen will display Restarting and the
Radio turn off
60
Software update
Software update allows you to set the Radio to automatically check for any
available software updates, and also to manually
Software update
force the Radio to check if an update is available
Auto-check setting
SIRIUS occasionally updates the software for
Check now
their Radios Check sirius.com or xmradio.com
for any updated documentation associated with
a software update
By default, the SiriusXM TTR1 Radio is set
to automatically check for updates If it finds a software update, you’ll be
prompted that a new software is available You can change this setting so the
Radio will not automatically check for updates
To change automatic software updates:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press
the TUNE knob
3. Turn the TUNE knob to scroll to and
highlight Software Update Press the
Software update
TUNE knob
Check periodically for
new versions?
4. Turn the TUNE knob to scroll to and
highlight Auto-check setting Press
the TUNE knob
YES*
NO
61
Configuring Your SiriusXM TTR1 Radio
5. Select whether you periodically want the Radio to check for software
updates Turn the TUNE knob to highlight YES or NO and press the
TUNE knob
6. Press MENU to exit
To force the Radio to check for a software update:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press the
TUNE knob
Software update
3. Turn the TUNE knob to scroll to and
highlight Software Update Press the
Checking for
new versions.../
TUNE knob
4. Turn the TUNE knob to scroll to and
highlight Check now Press the TUNE
knob
Software update
5. The Radio will check for a software update
If an update is available, the Radio will
download and install the update If no
update is available, Software up to date
will be displayed If a software update is
available, Software update is displayed
Software up to
date
ꢀ
6. Press MENU to exit
62
Updating the software:
Software update
If you manually force the Radio to check for a
software update, or the Radio automatically
finds a software update, and you want to update
the software, follow these steps
New version available.
Update Software?
YES
NO*
1. The Software update screen is
displayed Turn the TUNE knob to
highlight YES and press the TUNE
knob
Software update
1.5.6.21635-1A17
Downloading
2. The Radio will download the software
/
update Allow the download to finish
3. When the download is complete, you
will be prompted to proceed with the
installation of the software The
default answer is YES Press the
TUNE knob to proceed
Software update
Proceed?
YES*
Software update
NO*
4. You will be warned not to power
off the Radio, and the Radio will be
updated with the new software
5. When the update is complete, you’ll be
prompted to Press OK/Tune to start
Press the TUNE knob
1.5.6.21635-1A17
Updating...
/
63
Configuring Your SiriusXM TTR1 Radio
6. The Radio will start with the new software
Software update
Update
Completed
ꢀ
Press OK/Select
Info
Info displays the software version number, and the Radio ID number
To display the information:
1. Press MENU
2. Turn the TUNE knob to scroll to and highlight System Setup Press the
TUNE knob
Info
SW version:
v1.5.6.21635-1B2
3. Turn the TUNE knob to scroll to and
highlight Info Press the TUNE knob
Radio ID:
0013E09BD61E
4. The software version number, and the
Radio ID number will be displayed
5. Press MENU to exit
64
65
Appendix: Manual Network Configuration
Connecting to a network using the Manual settings requires some knowledge of
your network You’ll need to manually configure your network connection using the
Manual Settings or [Manual config] option if your wireless network name (SSID) is
hidden, or if your network is DHCP disabled
following section
Connect to a Wireless Network Using Manual Settings
In order to connect to a wireless network, you will need to have the following
information to enter during the procedure:
Is DHCP enabled or disabled?
If disabled, the IP address to use for the Radio?
If disabled, the Subnet Mask?
If disabled, the Gateway IP address?
If disabled, the Primary DNS IP address?
If disabled, the Secondary IP address?
The name of your wireless network (SSID)?
Is the wireless network password protected?
If so, the type of authentication?
If Pre-Shared Key, whether WEP is enabled?
If WPA or WPA2, whether it’s TKIP or AES?
The wireless network key (password)?
66
a. If you have just turned your SiriusXM TTR1 Radio on for the first
time, the SSID screen will already be displayed Skip ahead to step d
b. Press MENU and turn the TUNE knob to highlight System Setup
Press the TUNE Knob
c. Turn the TUNE knob to highlight Network Press the TUNE Knob
d. Turn the TUNE Knob to highlight Manual Settings or [Manual
config] Press the TUNE Knob
Connection type
Wired
Wireless
e. Turn the TUNE Knob to highlight
>
>
Wireless Press the TUNE Knob
f. Will you be using DHCP? Turn the
TUNE Knob to highlight DHCP enable
or DHCP disable and press the TUNE
Knob
g. If you have selected DHCP disable, enter the following information
Otherwise, continue with step h
For each entry, Turn the TUNE knob to select the numbers, and
press the TUNE knob to confirm and move to the next number
Press BACK if you entered an incorrect number
TIP! You can use the Remote Control to increment the numbers (
), and
move forward or backward through the number fields ( + and —)
i Enter the IP address to use for the Radio
ii Enter the Subnet Mask for the network
67
Appendix: Manual Network Configuration
IP settings
iii Enter the Gateway IP address for the
IP address
network
.
.
.
.
0
0
0
0
0
iv Enter the Primary DNS IP address for
the network
Subnet mask
.
.
255 255 255
v Enter the Secondary DNS IP address
for the network, or leave blank if there
is none
h. Enter your wireless network name (SSID) Note that the SSID is case
sensitive Turn the TUNE knob to scroll through the list of characters
and highlight each character Press the
SSID
TUNE knob to select the highlighted
character and move to the next character
0123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
BKSP
OK
If you make a mistake, turn the TUNE knob
to highlight BKSP and press the TUNE
knob to erase the character When done,
turn the TUNE knob to highlight OK and
press the TUNE knob.
CANCEL
Authentication
Open
Pre-Shared Key
i. Select the authentication type, Open (no
key (password)), Pre-Shared key, WPA, or
>
WPA2 Turn the TUNE Knob to highlight your WPA
WPA2
selection and press the TUNE knob. If you
have selected Open, skip ahead to step k
j. Depending upon your selection, complete these additional steps:
• Pre-Shared Key:
i Select whether the Pre-Shared Key has WEP encryption disabled or
68
disabled Turn the TUNE Knob to highlight your selection and
press the TUNE knob.
ii Enter your key (password) Turn the TUNE knob to scroll through
the list of characters and highlight
Key:
each character Press the TUNE
knob to select the highlighted
character and move to the next
character If you make a mistake,
turn the TUNE knob to highlight
BKSP and press the TUNE knob
erase the character
0123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
BKSP
OK
CANCEL
• WPA or WPA2:
i Select whether WPA or WPA2 has TKIP or AES encryption
Turn the TUNE Knob to highlight your selection and press the
TUNE knob.
ii Enter your key (password) Remember that the key is case
sensitive Turn the TUNE knob to scroll through the list of
characters and highlight each character Press the TUNE
knob to select the highlighted character and move to the
next character If you make a mistake, turn the TUNE knob
to highlight BKSP and press the TUNE knob to erase the
character When done, turn the TUNE knob to highlight OK and
press the TUNE knob.
k. If you have entered the correct information, and the Radio is able
to connect to your wireless network, the Connected screen will be
displayed If not, the Failed to connect screen is displayed This
69
Appendix: Manual Network Configuration
means that one or more of the settings you entered is incorrect
Connected
Failed
to connect
Connected
ꢀ
l. If you are installing your SiriusXM TTR1 Radio for the first time,
If you have previously entered your SiriusXM user name and password
into the Radio, and had tuned to a channel, the screen will show
Connecting. When successfully connected, the Buffering... screen
will be displayed as the channel information is streamed to the Radio
When complete, you are returned to the main display screen and you
should hear the audio playing Otherwise, the Category Tune screen is
displayed
3:13PM
3:14PM
SiriusXM
SiriusXM 001
SIRIUS XM Hits 1
SIRIUS XM Hits 1
Connecting.
Buffering...
/
/
70
Connect to a Wired Network Using Manual Settings
In order to connect to a wired network, you will need to have the following
information to enter during the procedure:
Is DHCP enabled or disabled?
If disabled, the IP address to use for the Radio?
If disabled, the Subnet Mask IP address?
If disabled, the Gateway IP address?
If disabled, the Primary DNS IP address?
If disabled, the Secondary DNS IP address?
a. At the rear of the Radio, remove the compartment cover and
connect an Ethernet cable to the Ethernet connector on the inside
compartment cover
b. Connect the other end of the Ethernet cable to your home’s wired
network
c. If you have just turned your SiriusXM TTR1 Radio on for the first
time, the SSID screen will already be displayed Skip ahead to step f
d. Press MENU and turn the TUNE knob to highlight System Setup
Press the TUNE Knob
e. Turn the TUNE knob to highlight Network Press the TUNE Knob
f. Turn the TUNE Knob to highlight Manual Settings [Manual config]
Press the TUNE Knob
71
Appendix: Manual Network Configuration
g. Turn the TUNE Knob to highlight Wired
Connection type 1/9
Press the TUNE Knob
Wired
Wireless
>
>
h. Will you be using DHCP? Turn the TUNE
Knob to highlight DHCP enable or DHCP
disable and press the TUNE Knob
i. If you have selected DHCP disable, enter
the following information Otherwise, continue with step j
For each entry, Turn the TUNE knob to select the numbers, and press
the TUNE knob to confirm and move to the next number Press BACK if
you entered an incorrect number
TIP! You can use the Remote Control to increment the numbers (
), and move
forward or backward through the number fields ( + and —)
i Enter the IP address to use for the Radio
ii Enter the Subnet Mask IP address for the network
iii Enter the Gateway IP address for the
network
IP settings
IP address
iv Enter the Primary DNS IP address for
the network
.
.
.
0
0
0
0
0
Subnet mask
v Enter the Secondary DNS IP address
for the network, or leave blank if there
is none
.
.
.
255 255 255
j. If you have entered the correct information, and the Radio is able to
connect to your network, the Connected screen will be displayed If
not, the Failed to connect screen is displayed This means that one or
72
more of the settings you entered is
incorrect If Waiting for Ethernet is
displayed, check the Ethernet cable
connections
Connected
Connected
ꢀ
k. If you are installing your SiriusXM
TTR1 Radio for the first time, continue
Network settings
If you have previously entered your
SiriusXM user name and password into
the Radio, and had tuned to a channel,
the screen will show Connecting.
When successfully connected, the
Buffering... screen will be displayed as
the channel information is streamed
to the Radio When complete, you are
returned to the main display screen
and you should hear the audio playing
Otherwise, the Category Tune screen
is displayed
Waiting for
Ethernet
Failed
to connect
3:14PM
3:13PM
SiriusXM 001
SiriusXM
SIRIUS XM Hits 1
SIRIUS XM Hits 1
Buffering...
Connecting.
/
/
73
74
75
Troubleshooting
Your SiriusXM TTR1 Radio has been designed and built to be trouble-free but if
you experience a problem, here’s some troubleshooting hints
You can also call SIRIUS Customer Care at 800-869-5964 or XM Customer Care
at 800-967-2346
If you see this on the screen: Try this:
Connecting
• The Radio is attempting to connect to the SiriusXM
Internet Radio service If this message is displayed
more than one minute, make sure your network is
connected to the Internet
To verify that you have an Internet connection,
you get the message Software up to date, or New
version available, then the Radio is connected to the
Internet If you get the message, Login failed, then
you don’t have an Internet connection Check with
your network administrator for Internet connectivity
on your network
• Turn your Radio Off and On again
Buffering
Updating
• The Radio is loading the channel information If this
message is displayed for more than one minute,
make sure your connection to the Internet has
not been interrupted See Connecting (previous
troubleshooting item) and verify your Internet
connection
• Turn your Radio Off and On again
• Your Radio is installing a software update Do
not turn the Radio off Allow the software update
complete
76
If you see this on the screen: Try this:
Waiting for Ethernet
• The Radio is expecting a wired Ethernet
connection Plug an Ethernet wire into your
home/office network, then plug the other
end into the Ethernet connection inside the
compartment at the rear of the Radio (Refer to
• Change to a wireless network connection if a
wired Ethernet connection is not available
Failed to connect
• The network information you entered is
incorrect Verify and re-enter the information
for a wired network )
• You have entered an incorrect password for a
secure wireless network Verify and re-enter the
• If you have manually configured a network
connection, you have entered one or more
incorrect settings Verify and re-enter the
Stream Closed
• Your account user name and password has
been used at another location to connect to
the Premium SiriusXM Internet Radio service,
and your Radio has been disconnected from the
service Turn your Radio Off and On again
• The Radio may have timed out due to lack of
activity Turn your Radio Off and On again
To prevent a time-out, periodically adjust the
volume, change the channel, or enter a menu, etc
77
Troubleshooting
If you see this on the screen: Try this:
Login failed
There are several possible reasons:
• Your SIRIUS or XM user name and/or password was
entered incorrectly
• You don’t have a subscription to the Premium
SiriusXM Internet Radio service
• Your subscription is no longer valid
• For XM only, you will need to update your password
to use the SiriusXM TTR1 Radio See IMPORTANT
To verify that you are subscribed to the service,
listen online:
• For SIRIUS service go to sirius.com, Click on the
LISTEN ONLINE link, and then click the LAUNCH
ONLINE PLAYER link Enter your user name and
password Select a channel to listen to and then
click on the PREMIUM link If you can listen in the
Premium mode, then you are subscribed to the
Premium SiriusXM Internet Radio service
• For XM service go to xmradio.com Click on the
LISTEN ONLINE NOW link and then enter your
user name and password If you can listen, then
you are subscribed to the SiriusXM Internet Radio
service
Close the browser window to exit the player before
continuing
If you don’t have a Premium SiriusXM Internet Radio
subscription, go to sirius.com/siriusinternetradio or
call 888-539-7474 to subscribe For XM service go
78
If this happens:
Try this:
Login failed (continued)
to xmradio.com/getxmro or call 800-967-2346 to
subscribe and get your user name and password
You can add this service to your SIRIUS or XM
subscription, or subscribe only to the Premium
SiriusXM Internet Radio service
You do not receive the same
SIRIUS or XM channels you
receive on your Satellite Radio
• The SiriusXM Internet Radio service does not
have all of the same channels as the SIRIUS or
XM satellite service
Check sirius.com or xmradio.com for the latest
Internet Radio channel lineup
The Network Wizard fails before
the Radio connects to your
network
• Your network has DHCP disabled You’ll have to
manually configure your network connection
for a wired network )
The Network Wizard does not find
your wireless network
• Your wireless network has a hidden name (SSID)
If so, you will have to manually configure your
• The wireless signal from your access point is too
low Try moving the Radio closer to your access
point and see if the Network Wizard finds your
wireless network
79
80
81
Product Specifications
Dimensions
SiriusXM TTR1 Radio
283 mm (W) x 185 mm (H) x 95 mm (D)
11 in (W) X 7 25 in (H) X 3 75 in (D)
Remote
52 mm (W) x 85 mm (H) x 5 mm (D)
2 in (W) x 3 3 in (H) x 25 in (D)
Weight
SiriusXM TTR1 Radio
2 85 kg (6 3 lbs)
Audio Outputs
Headphone
Line Out
3 5 mm diameter mini stereo jack
3 5 mm diameter mini stereo jack
Audio Input
Aux In
3 5 mm diameter mini stereo jack
82
Patent and Environmental Information
Patent Information
It is prohibited to, and you agree that you will not, copy, decompile,
disassemble, reverse engineer, hack, manipulate, or otherwise access and/
or make available any technology incorporated in this product Furthermore,
the AMBE® voice compression software included in this product is protected
by intellectual property rights including patent rights, copyrights, and trade
secrets of Digital Voice Systems, Inc The software is licensed solely for use
within this product The music, talk, news, entertainment, data, and other
content on the Services are protected by copyright and other intellectual
property laws and all ownership rights remain with the respective content
and data service providers You are prohibited from any export of the content
and/or data (or derivative thereof ) except in compliance with applicable
export laws, rules and regulations The user of this or any other software
contained in a SiriusXM Radio is explicitly prohibited from attempting to copy,
decompile, reverse engineer, hack, manipulate or disassemble the object
code, or in any other way convert the object code into human-readable form
Environmental Information
Follow local guidelines for waste disposal when discarding packaging and
electronic appliances
Your Radio is packaged with cardboard, polyethylene, etc , and does not
contain any unnecessary materials
83
FCC Statement
The user is cautioned that changes or modifications not expressly approved by Sirius XM Radio
Inc can void the user’s authority to operate this device
This device complies with Part 15 of the FCC Rules:
1 This device may not cause harmful interference
2 This device must accept any interference received, including interference that may
cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable
protection against harmful interference in a residential installation This equipment generates,
uses and can radiate Radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to Radio communications However, there
is no guarantee that interference will not occur in a particular installation If this equipment
does cause harmful interference to Radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons
• This device must not be co-located or operating in conjunction with any other antenna
or transmitter
84
Copyrights and Trademarks
©2011 Sirius XM Radio Inc SIRIUS, XM and all related marks and logos are trademarks
of Sirius XM Radio Inc and its subsidiaries All other marks and logos are the property
of their respective owners All rights reserved Hardware, subscription and activation
fee required Other fees and taxes will apply Month-to-month subscriptions must
be activated via telephone Hardware and subscription sold separately Subscription
governed by SIRIUS Terms & Conditions available at sirius com/serviceterms Prices and
programming are subject to change SIRIUS Radio U.S. service only available in the 48
contiguous United States and the District of Columbia.
85
86
SIRIUS Customer Care
800 869 5364
XM Customer Care
800 967 2346
sirius com
xmradio com
Sirius XM Radio Inc
1221 Avenue of the Americas
New York, NY 10020
© 2011 Sirius XM Radio Inc
TTR1 UG 012111a
|