Sharp Blu ray Player BD HP25U User Manual

MODEL

BD-HP25U

BLU-RAY DISC/DVD PLAYER

OPERATION MANUAL

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal

Additional Safety Information

injuries and property damage if improperly handled. This product has been engineered

and manufactured with the highest priority on safety. However, improper use can result

in electric shock and/or fire. In order to prevent potential danger, please observe the

following instructions when installing, operating and cleaning the product. To ensure

your safety and prolong the service life of your Blu-ray Disc/DVD Player, please read the

following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

15) Power Sources—This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the

operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating

instructions.

e) Adjust only those controls that are covered by the operating instructions as

an improper adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the product to its

normal operation,

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of

time.

14) Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

f) If the product has been dropped or damaged in any way, and

g) When the product exhibits a distinct change in performance - this indicates a

need for service.

19) Replacement Parts—When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure

to install the product according to the method recommended by the manufacturer.

22) The main AC plug is used as disconnect device and shall always remain readily

operable.

IMPORTANT SAFETY INSTRUCTIONS

• Water and Moisture—Do not use this product near

• Heat—The product should be situated away from

water - for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet basement; or

near a swimming pool; and the like.

heat sources such as radiators, heat registers, stoves,

or other products (including amplifiers) that produce

heat.

• Stand—Do not place the product on an unstable

cart, stand, tripod or table. Placing the product on an

unstable base can cause the product to fall, resulting

in serious personal injuries as well as damage to the

product. Use only a cart, stand, tripod, bracket or

table recommended by the manufacturer or sold with

the product. When mounting the product on a wall,

be sure to follow the manufacturer’s instructions. Use

only the mounting hardware recommended by the

manufacturer.

• Lightning—For added protection for this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from

the wall outlet. This will prevent damage to the

product due to lightning and power-line surges.

• To prevent fire, never place any type of candle or

flames on the top or near the product.

• To prevent fire or shock hazard, do not expose this

product to dripping or splashing.

• No objects filled with liquids, such as vases, should

be placed on the product.

• Selecting the location—Select a place with no direct

sunlight and good ventilation.

• To prevent fire or shock hazard, do not place the AC

cord under the product or other heavy items.

• Ventilation—The vents and other openings in the

cabinet are designed for ventilation. Do not cover

or block these vents and openings since insufficient

ventilation can cause overheating and/or shorten the

life of the product. Do not place the product on a bed,

sofa, rug or other similar surface, since they can block

ventilation openings. This product is not designed

for built-in installation; do not place the product in an

enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s

instructions are followed.

PRECAUTIONS

Precautions on viewing stereoscopic 3D images

Notes on using Wireless LAN

• Do not view stereoscopic 3D images if you have a history of photosensitivity, heart

disease or poor health. This may cause the symptoms to worsen.

• If you experience any health problems such as fatigue and discomfort while viewing

stereoscopic 3D images, immediately discontinue viewing. Continuing viewing after

symptoms appear may cause health risks. Take a break until the symptoms have

completely disappeared.

• When this player is connected to a wireless LAN network, transmissions between

the wireless LAN components inside this player and a wireless LAN compatible

broadband router (commercially available) are carried out.

Precautions on using Wireless LAN

• The following devices, radio stations, etc. use the same frequency bands. Do not use

wireless LAN near them.

• Ages of 5–6 or over are recommended for viewing stereoscopic 3D images.

Symptoms such as fatigue and discomfort are difficult to determine in young

children, therefore they may suddenly become ill. When viewing 3D images with

children, please watch for eye strain symptoms.

• When viewing stereoscopic 3D images, take a moderate break after watching one

title. Viewing for extended periods may cause visual strain.

Manufacturing/scientific/diagnostic equipment such as pacemakers, etc.

Specified low power radio stations (radio stations that do not require a license)

If this player is used near these devices, there is a possibility that radio wave

interference may occur. Therefore transmission may not be possible or speed may be

reduced.

• Mobile phones, radios, etc. use different radio frequency bands from wireless LAN,

so there will not be any effect on the transmissions of these devices or wireless LAN

if this player is used near them.

However, if a wireless LAN product is placed near one of these devices, audio or

video noise may occur due to the electromagnetic waves that emit from wireless LAN

products.

• Radio waves will pass through the wood, glass, etc. used in standard housing,

however they will not pass through reinforcing bars, metal, concrete, etc. Radio

waves will not pass through walls and floors if these materials are used.

Precautions when cleaning this product

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• To clean the outer cabinet, periodically wipe it with a soft cloth (cotton, flannel, etc.).

• For severe dirt, soak a soft cloth (cotton, flannel, etc.) in some neutral detergent

diluted with water, wring the cloth out thoroughly, wipe off the dirt, then wipe again

with a soft, dry cloth.

• Do not use chemicals or a chemically treated cloth for cleaning. It may damage the

cabinet finish.

DEAR SHARP CUSTOMER

Thank you for your purchase of the SHARP Blu-ray Disc/DVD Player. To ensure safety and many years of trouble-free operation of your product, please read

the Important Safety Instructions carefully before using this product.

Getting Started

Step 1: Unpacking

Step 2: Selecting equipment to connect

Make sure the following accessories are provided with the product.

Connection varies with the equipment used. Refer to Connection

(Pages 16–19).

Turn off the devices before connecting.

Remote control unit

AC cord

Enjoying BD-LIVE and video on demand services (e-Contents)

To enjoy BD-LIVE content or video on demand streaming content on your TV,

after an Internet connection is made, communication setup is required. Refer

to “Communication Setup” (Pages 46–49).

Step 3: Playing back video/picture/music content

Play back video, picture or music content from the desired media source

such as Blu-ray and DVD discs, or via the Internet.

Refer to Playback (Pages 20–39) and video on demand streaming content

(Pages 55–56).

Page 20

“AA” size battery (g2)

Step 4: Adjust settings to suit your preference

Adjust settings to enjoy various features and other functions for playing

discs/content.

Refer to Settings (Pages 40–54).

Page 20

Pages 15 and 20

Optional accessories

Wireless LAN adapter

VR-WL25

Contents

Operating a SHARP TV Using the Remote Control.................................................... 22

TV function control................................................................................................. 22

Turning Off the LCD Backlight and Indications .......................................................... 22

Using AQUOS LINK.................................................................................................... 23

Controlling the Blu-ray disc player using AQUOS LINK ........................................ 23

Using 3D..................................................................................................................... 23

Control Panel.............................................................................................................. 24

Video/Picture/Music Playback.........................................................................25

Loading a Disc............................................................................................................ 25

BD/DVD Video Playback............................................................................................. 25

Displaying the disc information.............................................................................. 26

BD/DVD Menus .......................................................................................................... 26

Start playback by selecting a title from the top menu ........................................... 26

Using the disc menu .............................................................................................. 26

Using the pop-up menu......................................................................................... 27

Enjoying BONUSVIEW or BD-LIVE............................................................................. 27

Use of Picture in Picture function (secondary audio/video playback) ................... 28

Virtual Package ...................................................................................................... 28

BD-LIVE ................................................................................................................. 28

DVD-R/-RW (VR format) / BD-RE/-R (BDAV format) Playback................................... 29

Playback by selecting a title .................................................................................. 29

Playback by selecting a chapter............................................................................ 30

Sorting the titles..................................................................................................... 30

Playback by selecting a Playlist............................................................................. 30

Playback from the beginning or resume playback................................................. 30

Audio CD Playback..................................................................................................... 31

Playback from the beginning ................................................................................. 31

Playback by selecting a track ................................................................................ 31

Operation procedure for the “Functions” menu..................................................... 31

Audio Data (MP3 File) Playback ................................................................................. 32

Displaying Still Images (JPEG files)............................................................................ 33

Accessing DLNA servers............................................................................................ 34

Playback by selecting a file list.............................................................................. 34

Playback Functions...........................................................................................35

Fast Forward/Reverse (Search) .................................................................................. 35

Skipping to the Next or the Start of the Current Chapter (Track/Title) ....................... 35

Pause/Frame Advance Playback................................................................................ 35

Slow Playback (Forward/Reverse).............................................................................. 35

Repeat Playback of a Title or Chapter (Repeat Playback) ......................................... 36

Partial Repeat Playback (Repeat Playback of a Specified Part)................................. 36

Displaying the Audio Information ............................................................................... 37

Switching Subtitles..................................................................................................... 37

Switching the Angle.................................................................................................... 37

Displaying the Angle Mark.......................................................................................... 37

Settings During Playback .................................................................................38

Function Control......................................................................................................... 38

Function control operation procedure ................................................................... 38

Functions which can be set ................................................................................... 39

Introduction

SAFETY INFORMATION ......................................................................................1

IMPORTANT SAFETY INSTRUCTIONS..............................................................2

PRECAUTIONS ....................................................................................................4

DEAR SHARP CUSTOMER .................................................................................5

Getting Started ....................................................................................................5

Contents...............................................................................................................6

What would you like to do with this Player?.....................................................8

About Media Types..............................................................................................9

Blu-ray Disc.................................................................................................................. 9

Types of Discs/Media Formats that Can Be Used with This Player ............................. 9

Discs that Cannot Be Used with This Player.............................................................. 10

About Disc Contents .................................................................................................. 11

BD Video ................................................................................................................ 11

Title, Chapter and Track......................................................................................... 11

Icons Used on BD/DVD Video Disc Cases ............................................................ 12

The Icons Used in This Operation Manual ................................................................. 12

Important Information.......................................................................................13

Disc Precautions......................................................................................................... 13

License and Copyright ............................................................................................... 13

Major Components............................................................................................14

Main Unit (Front)......................................................................................................... 14

Main Unit (Rear).......................................................................................................... 14

Remote Control Unit................................................................................................... 15

Connection

Connecting to a TV/projector...........................................................................16

Connecting to an amplifier/AV receiver ..........................................................17

HDMI connection........................................................................................................ 17

Digital audio connection............................................................................................. 17

Broadband Internet Connection ......................................................................18

Wired connection (LAN cable).................................................................................... 18

Wireless connection (wireless LAN)............................................................................ 19

Playback

Before Starting Playback..................................................................................20

Loading the Batteries in the Remote Control............................................................. 20

Approximate operating range of remote control.................................................... 20

Connecting the Power Cord....................................................................................... 20

Turning the Power On................................................................................................. 21

Turning the power on ............................................................................................. 21

Entering standby.................................................................................................... 21

Indicators on the Player ......................................................................................... 21

Language Setting ....................................................................................................... 22

Changing the on-screen display language ............................................................ 22

Contents

Settings

What to do first:

SETTINGS...........................................................................................................40

Common operations................................................................................................... 40

Basic Operation for Playback Setting ........................................................................ 41

Audio Video Settings .................................................................................................. 42

Smart Settings............................................................................................................ 43

AQUOS LINK.............................................................................................................. 43

Playback Setting......................................................................................................... 44

On Screen Language.................................................................................................. 45

Version........................................................................................................................ 45

System........................................................................................................................ 45

Communication Setup................................................................................................ 46

Sets whether “Cable” or “Wireless” is used for the network connection .............. 46

When selecting Cable ............................................................................................ 46

When selecting Wireless........................................................................................ 47

The operation procedure for inputting characters manually.................................. 49

USB Memory Management........................................................................................ 50

Software Update Settings .......................................................................................... 51

Auto Update from Network.................................................................................... 51

Manual Update from Network................................................................................ 52

Manual Update from USB memory device ............................................................ 52

Refer to “Getting Started” (p. 5) to prepare for using this

player.

Introduction (pp. 1–15)

Explains the important operation information.

Connection (pp. 16–19)

Shows the connecting options provided by this Player.

Playback (pp. 20–39)

Shows simple playback and useful functions.

Streaming content

Playing back video on demand streaming content........................................55

Instantly Watching Movies from Netflix...................................................................... 55

Playing back YouTube content ................................................................................... 55

Enjoying Movies and Internet Application with VUDU ............................................... 56

Settings (pp. 40–54)

Gives you more options to suit your circumstances.

Appendix

Troubleshooting.................................................................................................57

To Reset this Player................................................................................................ 60

On-screen Error Messages ..............................................................................61

Specifications ....................................................................................................62

Glossary .............................................................................................................63

Network Service Disclaimer.............................................................................66

About Software License....................................................................................67

LIMITED WARRANTY........................................................................................68

Streaming content (pp. 55–56)

Shows the Internet streaming services available with this

player.

Appendix (pp. 57–69)

Provides troubleshooting tips and more information.

The illustrations and on-screen displays in this operation manual

are for explanation purposes and may vary slightly from the

actual operations.

What would you like to do with this Player?

Watch high quality movies on Blu-ray discs

Enjoy BD-LIVE functions through the Internet

This Player is compatible with BD-LIVE. You can enjoy bonus content such

as movie trailers through the Internet when playing back BD-Video discs

compatible with BD-LIVE.

This Player offers full high-definition Blu-ray disc playback.

Video/Picture/Music Playback (p. 25)

Enjoying BONUSVIEW or BD-LIVE (pp. 27–28)

Enjoy stereoscopic and powerful 3D images

This player can play 3D content from 3D compatible Blu-ray discs through

an HDMI cable. To watch 3D images, connect a 3D compatible TV to this

player using an HDMI cable and play the 3D content while wearing 3D

glasses.

Enjoy video on demand streaming content with higher

image quality on your TV

This player supports video on demand streaming services using the

Internet. By connecting this player to the Internet, you can enjoy various

content streamed on your TV. Also, with this player’s “Super Picture”

function, you can enjoy video streaming images with higher image quality.

Using 3D (p. 23)

Playing back video on demand streaming content (pp. 55–56)

Super Picture (p. 43)

Enjoy different kinds of media sources

Use this player to enjoy video, picture or music content from various types

of media sources such as DVDs, USB memory devices and via the Internet.

About Media Types (pp. 9–12)

Video/Picture/Music Playback (p. 25)

Access to videos, pictures and music from home network

servers

This player can play back video, picture and music data stored on your

home network servers such as a DNLA certified PC.

Simple connection and operation through HDMI

This Player is equipped with an HDMI terminal. You can connect it to the TV

using HDMI and no other cable will be needed to enjoy movies. If your TV is

compatible with AQUOS LINK, you can control both the TV and this Player

with simple operations.

Accessing DNLA servers (p. 34)

Connecting to a TV/projector (p. 16)

About Media Types

Recording

Format

Disc

Size

Media Format

Recording Format

Contents

Blu-ray Disc

Disc Type

Contents

USB memory

device

DivX+HD

Audio + Video

(Movie)

Blu-ray Disc is the ultimate next generation optical

media format, offering the following key features:

• Largest capacity (25 GB single layer – 50 GB dual layer)

– with over 5 times the amount of content possible with

current DVDs, particularly well suited for high definition

feature films with extended levels of interactive features

• Pristine picture quality with the capability for full high

definition 1920 x 1080p resolution

• Best audio possible with uncompressed surround sound

(higher quality than even theater audio)

• Broadest industry support – ensuring more choice for

consumers in the marketplace

• Hardware products will be backward compatible with

DVDs, allowing continued enjoyment of existing DVD

libraries.

• Disc Durability – new breakthroughs in hard coating

technologies gives Blu-ray Discs the strongest

resistance to scratches and finger prints.

Region

Video code A/ALL

—

Audio

+ Video

(Movie)

12 cm

(5”)

Still image

(JPEG file)

JPEG^J

MP3^K

Audio

BD-RE DL

BD-R DL

BDMV/BDAV

format

• BD/DVD video players and discs have region codes,

which dictate the regions in which a disc can be played.

This Player’s region code is A for BD and 1 for DVD.

(Discs marked ALL will play in any player.)

• BD/DVD video operations and functions may be

different from the explanations in this manual and

some operations may be prohibited due to disc

manufacturer’s settings.

• If a menu screen or operating instructions are displayed

during playback of a disc, follow the operating

procedure displayed.

• The audio component of a DVD video recorded at 96

kHz (Linear PCM) will be output as 48 kHz audio during

playback.

DVD Region

Video code

1/ALL

Video format

Audio

+ Video

(Movie)

12 cm

(5”)

8 cm

(3”)

ALL

DVD+RW/DVD+R

DVD-RW/DVD-R

Video/VR/

AVCHD

DVD+R DL/DVD-R format

Audio

+ Video

(Movie)

12 cm

(5”)

8 cm

(3”)

(finalized disc

only)

DivX+HD

Types of Discs/Media Formats that

Can Be Used with This Player

Still

JPEG^J

MP3^K

NOTE

image

(JPEG

file)

• Playback for some of the discs in the left side column

tables may not be possible depending on the disc.

• “Finalize” refers to a recorder processing a recorded

disc so that it will play in other DVD players/recorders

as well as this player. Only finalized DVD discs will play

back in this player. (This player does not have a function

to finalize discs.)

• The following discs can be played back in this Player.

Do not use an 8 cm (3”) to 12 cm (5”) adapter.

• Use discs that conform to compatible standards as

indicated by the presence of official logos on the disc

label. Playback of discs not complying with these

standards is not guaranteed. In addition, the image

quality or sound quality is not guaranteed even if the

discs can be played back.

Audio

Audio CD

(CD-DA)

12 cm

(5”)

8 cm

(3”)

Audio CD^I

• Some discs cannot be played back depending on the

recording format.

CD-RW/CD-R

Audio CD

(CD-DA)

Audio

Still

JPEG^J

image

(JPEG

file)

Audio

MP3^K

DivX+HD

Audio

+ Video

(Movie)

About Media Types

^*3About the MP3 file format

The following CD-RW/R discs cannot be played.

• Discs on which data has not been recorded cannot be

played back.

• Discs recorded in a format other than an Audio CD and

JPEG/MP3 file format cannot be played back.

• Discs may not be played back depending on their

recording status or the status of the disc itself.

• Discs may not be played back depending on their

compatibility with this Player.

Discs that Cannot Be Used with

This Player

MP3 files are audio data compressed in the

MPEG1/2 Audio layer-3 file format. “MP3 files” have

“.mp3” as extensions. (Some files that have “.mp3”

extensions or files that have not been recorded in

MP3 format will produce noise or cannot be played.)

The following discs cannot be played back or will

not play back properly on this Player. If such a

disc is mistakenly played back, speaker damage

may occur. Never attempt to play back these

discs.

Playing the MP3 file format

• The MP3 files are not played in the order they were

recorded.

• It is recommended to record data at a lower speed as

data recorded at a fast speed can produce noise and

may not be able to be played.

• The more folders there are, the longer the reading time.

• Depending on the folder tree, reading MP3 files can take

time.

^*2About the JPEG file format

CDG, Video CD, Photo CD, CD-ROM, CD-TEXT,

SVCD, SACD, PD, CDV, CVD, DVD-RAM, DVD-

Audio, BD-RE with the cartridge, CD-WMA

JPEG is a type of file format for storing still-image

files (photos, illustrations, etc.). The Player lets you

play JPEG format still-image files.

File formats that are not compatible.

• Still images in formats other than JPEG (such as TIFF)

cannot be played.

• There may be some files that cannot be played even if

they are in JPEG format.

• Progressive JPEG files cannot be played.

• Moving image files as well as Motion JPEG format files

cannot be played, even though they are JPEG files.

Discs with unusual shapes cannot be played.

• Discs with unusual shapes (heart-shaped or hexagonal

discs, etc.) cannot be used. The use of such discs will

cause malfunction.

• The playing time may not be correctly displayed during

MP3 file playback.

The following files cannot be played on this

player.

• When both Audio CD [CD-DA] format and JPEG/

MP3 file formats are recorded on a disc. (The disc is

recognized to be an Audio CD [CD-DA] only tracks in

Audio CD [CD-DA] format are played back.)

• Multi-session discs cannot be played.

The following BD video discs cannot be played.

• Discs not displaying “A” or “ALL” for the region code

(discs sold outside the authorized marketing area).*

• Discs produced illegally.

• Discs recorded for commercial use.

The region code for this product is A.

Other files that cannot be played back.

• You may not be able to play some still images which

you have created, touched up, copied or otherwise

edited on your computer.

• You may not be able to play some still images you have

processed (rotated or saved by overwriting other images

you have imported from the Internet or e-mail).

The following DVD video discs cannot be played.

• Discs not displaying “1” or “ALL” for the region code

(discs sold outside the authorized marketing area).*

• Discs produced illegally.

• Discs recorded for commercial use.

You may experience one or more of the following

symptoms when playing files.

The region code for this product is 1.

The following BD-RE/R, DVD-RW/R and

DVD+RW/R discs cannot be played.

• Discs on which data has not been recorded cannot be

played back.

• It may take some time to play files depending on the

number of folders, number of files and volume of data

involved.

• EXIF information will not be displayed. EXIF stands for

Exchangeable Image File Format, and is a standard for

storing interchange information in image files, especially

those using JPEG compression. (Refer to http://exif.org

for more information.)

The following Audio CD^*1discs cannot be played.

• Discs containing a signal for the purpose of protecting

copyrights (copy control signal) may not be played back

with this Player.

• This Player has been designed on the premise of

playing back Audio CDs that comply with CD (Compact

Disc) standards.

About Media Types

About files/folders for Still images (JPEG

ABOUT DivX VIDEO

Title, Chapter and Track

• DivX^®is a digital video format created by DivX, Inc. This

is an official DivX Certified^®device that plays DivX video.

Visit www.divx.com for more information and software

tools to convert your files into DivX video.

files) and audio data (MP3 files)

You can play still images (JPEG files) /audio data

(MP3 files) with this unit by making folder(s) on discs

or USB memory devices as shown below.

• Blu-ray discs and DVDs are divided into “Titles”

and “Chapters”. If the disc has more than one

movie on it, each movie would be a separate

“Title”. “Chapters”, on the other hand, are

subdivisions of titles. (See Example 1.)

• Audio CDs are divided into “Tracks”. You can think

of a “Track” as one tune on an Audio CD. (See

Example 2.)

ABOUT DivX VIDEO-ON-DEMAND

• This DivX Certified^®device must be registered in order

to play DivX Video-on-Demand (VOD) movies. To obtain

the registration code, locate the DivX VOD section in

your device setup menu. Go to vod.divx.com for more

information on how to complete your registration.

Example of a folder structure:

Root

001.jpg/001.mp3

xxx.jpg/xxx.mp3

Example 1: Blu-ray disc or DVD

About Disc Contents

BD Video

001.jpg/001.mp3

256.jpg/256.mp3

01 Folder

Folder

Title 1

Title 2

001.jpg/001.mp3

255.jpg/255.mp3

Enjoy BD-specific functions including BONUSVIEW

(BD-ROM Profile 1 Version 1.1), such as picture-in-

picture, and BD-LIVE (page 28).

Chapter 1

Chapter 2

Chapter 3

Chapter 1

Example 2: Audio CD

xxx Folder

001.jpg/001.mp3

256.jpg/256.mp3

For the BD video discs compatible with

BONUSVIEW/BD-LIVE, you can enjoy additional

contents by copying the data from the discs or

downloading it via the Internet. For instance, this

function is capable of playing the original movie as

the primary video while playing video commentary

from the film director on a small screen as a

secondary video.

Track 1

Track 2

Track 3

Track 4

Including the root directory, the maximum number of folders

and files in each folder is limited to 256 in total.

File and folder requirements

• The discs or USB memory devices which this player

can play back (recognize) are limited to the following

properties:

Contains EXIF format files (only JPEG files)

Picture resolution: Between 32 x 32 and 7680 x 4320

pixels (only JPEG files)

NOTE

• The available functions differ depending on the disc.

Maximum number of folders and files in each folder:

256

Maximum hierarchy level of folders: 5

File size: 20 MB or less (JPEG files)

200 MB or less (MP3 files)

NOTE

• File and folder names displayed on this player may differ

from those displayed on PCs.

About Media Types

Subtitle languages

Icons Used on BD/DVD Video Disc

Cases

This indicates the kind of subtitles.

Screen aspect ratio

Movies are shot in a variety of screen modes.

The back of the case of a BD/DVD that is

commercially available usually contains various

information about the contents of the disc.

Camera angle

Recorded onto some BD/DVD discs are scenes

which have been simultaneously shot from a number

of different angles (the same scene is shot from the

front, from the left side, from the right side, etc.).

1. English

2. Chinese

1. English

2. Chinese

Region code

This indicates the region code (playable region code).

The Icons Used in This Operation

Manual

1 23

4 56

16:9 LB

.............. Indicates the functions that can be

performed for BD Video discs.

.............. Indicates the functions that can be

performed for BD-RE discs.

.............. Indicates the functions that can be

performed for BD-R discs.

DVD Video BD Video

BD VIDEO

Audio tracks and audio formats

BD-RE

BD-R

BD and DVD discs can contain up to 8 separate

tracks with a different language on each. The first in

the list is the original track.

This section also details the audio format of each

soundtrack — Dolby Digital, DTS, MPEG etc.

...........Indicates the functions that can be

DVD VIDEO

performed for DVD Video discs.

.............. Indicates the functions that can be

performed for DVD-RW discs.

.............. Indicates the functions that can be

performed for DVD-R discs.

.............. Indicates the functions that can be

performed for Audio CDs.

Dolby Digital

A sound system developed by Dolby Laboratories Inc.

that gives movie theater ambience to audio output

when the Player is connected to a Dolby Digital

processor or amplifier.

DVD-RW

DVD-R

AUDIO CD

CD-R

DTS

DTS is a digital sound system developed by DTS, Inc.

for use in cinemas.

.............. Indicates the functions that can be

performed for CD-R discs.

Linear PCM

Linear PCM is a signal recording format used for

Audio CDs and on some DVD and Blu-ray discs. The

sound on Audio CDs is recorded at 44.1 kHz with

16 bits. (Sound is recorded between 48 kHz with 16

bits and 96 kHz with 24 bits on DVD video discs and

between 48 kHz with 16 bits and 192 kHz with 24 bits

on BD video discs.)

.............. Indicates the functions that can be

performed for CD-RW discs.

.............. Indicates the functions that can be

performed for USB memory devices.

CD-RW

USB

Important Information

Cleaning the Pick Up Lens

•

is a trademark.

Disc Precautions

• Never use commercially available cleaning discs. The

use of these discs can damage the lens.

• Request the nearest service center approved by SHARP

to clean the lens.

• “BD-LIVE” logo is a trademark of Blu-ray Disc

Association.

Be Careful of Scratches and Dust

• BD, DVD and CD discs are sensitive to dust, fingerprints

and especially scratches. A scratched disc may not

be able to be played back. Handle discs with care and

store them in a safe place.

•

is a trademark of DVD Format/Logo Licensing

Corporation.

Warnings about dew formation

• Condensation may form on pick up lens or disc in the

following conditions:

− Immediately after a heater has been turned on.

− In a steamy or very humid room.

− When the Player is suddenly moved from a cold

environment to a warm one.

When condensation forms:

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

• “x.v.Color” and “x.v.Color” logo are trademarks of Sony

Corporation.

• Java and all Java-based trademarks and logos

are trademarks or registered trademarks of Sun

Microsystems, Inc. in the United States and/or other

countries.

• “BONUSVIEW” logo is a trademark of Blu-ray Disc

Association.

• “AVCHD” and the “AVCHD” logo are trademarks of

Panasonic Corporation and Sony Corporation.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of

Blu-ray Disc Association.

• Netflix and the Netflix logo are the registered trademarks

of Netflix, Inc.

Proper Disc Storage

Place the disc in the center

of the disc case and store the

case and disc upright.

• It becomes difficult for the Player to read the signals

on the disc and prevents the Player from operating

properly.

Avoid storing discs in locations

subject to direct sunlight,

close to heating appliances or

in locations of high humidity.

To remove condensation:

• Take out the disc and leave the Player with the

power off until the condensation disappears. Using

the Player when there is condensation may cause

malfunction.

Do not drop discs or subject

them to strong vibrations or

impacts.

• YouTube is a trademark of Google Inc.

• VUDU™ is a trademark of VUDU, Inc.

• DivX^®, DivX Certified^®, DivX Plus^TMHD and associated

logos are trademarks of DivX, Inc. and are used under

license.

License and Copyright

Avoid storing discs in locations

where there are large amounts

of dust or moisture.

Audio-visual material may consist of copyrighted

works which must not be recorded without the

authority of the owner of the copyright. Refer to

relevant laws in your country.

• “This item incorporates copy protection technology

that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse engineering

and disassembly are prohibited.”

Handling Precautions

• If the surface is soiled, wipe gently with a soft, damp

(water only) cloth. When wiping discs, always move the

cloth from the center hole toward the outer edge.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

ENERGY STAR^®Program Information

• Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;

6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872

& other U.S. and worldwide patents issued & pending.

DTS and the Symbol are registered trademarks, &

DTS-HD, DTS-HD Master Audio | Essential and the DTS

logos are trademarks of DTS, Inc. Product includes

• Do not use record cleaning sprays, benzene, thinner,

static electricity prevention liquids or any other solvent.

• Do not touch the surface.

• Do not stick paper or adhesive labels to the disc.

• If the playing surface of a disc is soiled or scratched,

the Player may decide that the disc is incompatible

and eject the disc tray, or it may fail to play the disc

correctly. Wipe any dirt off the playing surface with a

soft cloth.

Products that have earned

the ENERGY STAR^®are

designed to protect the

environment through

superior energy efficiency.

ENERGY STAR^®is a U.S. registered mark.

Major Components

Main Unit (Front)

Main Unit (Rear)

POWER (p. 21)

8 USB2 terminal (p. 32)

AC IN terminal (p. 20)

POWER (ON/STANDBY) indicator (p. 21) 9 Remote control sensor (p. 20)

2 ETHERNET terminal (p. 18)

3 W-LAN*/USB1 terminal (p. 19, 27)

4 HDMI OUT terminal (p. 16)

d PLAY (p. 25)

0 BD/DVD/CD mode indicator (p. 21)

Q Door flap

H STOP (p. 25)

G REV (p. 35)

J FWD (p. 35)

OPEN/CLOSE (p. 25)

W Disc tray (p. 25)

5 DIGITAL AUDIO OUT OPTICAL terminal (p. 17)

The only wireless LAN adapter which can be connected to this player is the VR-WL25

adapter (sold separately) (p. 5).

NOTE

• When you insert or remove a USB memory device, be sure to turn the main power off.

Also, be sure to set “Quick Start” to “No” (See page 43) before inserting or removing

the device. If you insert or remove the device with the player or Quick Start on, the data

may become damaged.

Major Components

POWER (p. 21)

m OPEN/CLOSE (p. 25)

Remote Control Unit

3 AUDIO (p. 37), SUBTITLE (p. 37)

4 Number buttons (p. 39)

5 VUDU (p. 56)

T SKIP/k (pp. 29, 35)

U SKIP/l (pp. 29, 35)

F PAUSE (pp. 32, 35)

d PLAY (p. 25)

0 TOP MENU/TITLE LIST (pp. 26, 29)

Q Cursor buttons (a/b/c/d), ENTER (pp. 22, 40)

W EXIT (p. 40)

E A (Red), B (Green), C (Blue), D (Yellow)

(pp. 29, 30, 32, 49)

(Lock) (See below.)

T3D (p. 23)

Y DISPLAY (pp. 26, 36)

UTV control buttons (p. 22)

I FUNCTION (pp. 36, 38)

O V FWD (p. 35)

PS REV (p. 35)

A H STOP (p. 25)

SPOP-UP MENU (p. 27)

Dn RETURN (pp. 31, 36)

FPinP (p. 28)

GHOME (pp. 22, 40)

Keylock function

You can set the keylock to prevent accidental operations.

This function allows TVs compatible with AQUOS LINK to also perform a Key Lock on the player.

Press and hold

(Lock) for more than 2 seconds.

• Each time you perform this operation, the function is activated or deactivated.

• If you try to operate the Player while the keylock function is set, “Hold” blinks on the front display panel

to indicate that the keylock function is set.

Connection

Connecting to a TV/projector

You can enjoy high quality digital picture and sound using an HDMI cable. (Only

TVs/projectors with an HDMI terminal can be connected to this player.)

When you use AQUOS LINK, make sure to use a certified HDMI cable.

NOTE

• In this player, “HDMI Video Out” is set to “Auto” as a default (See page 42). (Normally

set to “Auto”.) If you don’t get a stable image with “HDMI Video Out” set to “Auto”,

select the output resolution which corresponds to the connected equipment.

• To enjoy 3D images, connection to a 3D compatible TV is needed.

1 Be sure to turn off this Player and the TV/projector before making any

connections.

• For connection to a TV/projector, refer to the TV/projector’s operation manual.

2 Firmly connect an HDMI cable (commercially available) to the HDMI OUT

terminal on the player (1) and the HDMI IN terminal of the TV/projector (2).

After connecting

• If desired, connect audio equipment. (Page 17)

• If necessary, perform the Audio Video Settings. (Pages 42–43)

• Refer to AQUOS LINK function. (Pages 23 and 43)

• Prepare the desired disc or content and start playback. (Pages 25–34)

HDMI cable

(commercially available)

Projector

Connecting to an amplifier/AV receiver

You can connect this player to an amplifier/AV receiver to enjoy digital surround

sound. With this player, the audio connection can be made using either one of

the following methods depending on the capabilities of the amplifier/AV receiver

you connect.

Digital audio connection

You can connect an amplifier/AV receiver using an optical digital audio cable

(commercially available).

• HDMI connection

• Digital audio connection

NOTE

• Be sure to turn off this Player and the equipment before making any connections.

• For details on output of next generation audio formats, see page 54.

HDMI connection

Optical digital cable

Amplifier/AV receiver

Commercially available

HDMI cable

NOTE

• When using OPTICAL DIGITAL AUDIO OUT, 5.1ch Digital Output is available. (7.1ch

Digital Output is not available.)

After connecting

• If necessary, perform the Audio Video Settings. (Pages 42–43)

• Prepare the desired disc or content and start playback. (Pages 25–34)

Amplifier/

AV receiver

HDMI cable

Commercially available

NOTE

• When using an HDMI output, 7.1 ch Digital Output is available.

• Audio transmitted in DTS-HD High Resolution Audio and DTS-HD Master Audio

formats is output from the HDMI terminal as Bitstream. Connect an amplifier with a

built-in decoder to enjoy the fine sound quality.

Broadband Internet Connection

By connecting this player to the Internet, you can enjoy a variety of content

on your TV using BD-LIVE functions, video on-demand services (e-Contents),

home networks and also perform software updates. In this player, the Internet

connection can be made using either one of the following methods.

• Wired connection (LAN cable)

Wired connection (LAN cable)

Connect a LAN cable (commercially available) to the ETHERNET terminal of this

player (1) and the LAN port of the broadband router (2).

• Wireless connection (wireless LAN) (See page 19.)

NOTE

• Be sure to turn off this Player and the equipment before making any connections.

• When an Internet connection is made, wired and wireless connections cannot be used

at the same time. Use only one of the connection types (See page 46).

CAUTION

• When using a broadband Internet connection, a contract with an Internet service

provider is required. For more details, contact your nearest Internet service provider.

• Refer to the operation manual of the equipment you have as the connected equipment

and connection method may differ depending on your Internet environment.

LAN cable

LAN

Internet

Modem

Broadband

router

Commercially available

NOTE

• Use a LAN cable/router supporting 10BASE-T/100BASE-TX.

• SHARP cannot guarantee that all brands’ hubs will operate with this player.

After connecting

• Perform the communication settings. (Pages 46–49)

• When enjoying BD-LIVE functions, see pages 28 and 44.

• When enjoying video on-demand services (e-Contents), see pages 55–56.

• To play back files via the Home Network, see page 34.

• To update the software via the Internet, perform Software Update Settings.

(Pages 51–52)

Broadband Internet Connection

NOTE

Wireless connection (wireless LAN)

• When you insert or remove a wireless LAN adapter, be sure to turn the main power off

and make sure that “Quick Start” is set to “No” (See page 43).

• You must use a wireless router/access point that supports IEEE802.11 b/g/n. (n is

recommended for stable operation of the wireless network.)

• Wireless LAN, in its nature, may cause interference, depending on the usage conditions

(access point performance, distance, obstacles, interference by other radio devices,

etc.).

Insert a wireless LAN adapter (sold separately, Model number VR-WL25) into the

W-LAN/USB1 terminal on the rear of the player.

• Set the wireless router/access point to Infrastructure mode. Ad-hoc mode is not

supported.

• SHARP cannot guarantee that wireless LAN adapters other than the VR-WL25 adapter

will operate with this player.

• SHARP cannot guarantee that all brands’ wireless routers will operate with this player.

After connecting

• Perform the communication settings. (Pages 46–49)

• When enjoying BD-LIVE functions, see pages 28 and 44.

• When enjoying video on-demand services (e-Contents), see pages 55–56.

• To play back files via the Home Network, see page 34.

• To update the software via the Internet, perform Software Update Settings.

(Pages 51–52)

Wireless LAN

adapter*

Wireless

router

Modem

Internet

When a wireless connection is made, it is necessary to enter the MAC address

shown on the wireless LAN adapter for the wireless router. We recommend writing

down the MAC address in this operation manual. (See page 48.)

Optional accessories*

Wireless LAN adapter

VR-WL25

Playback

Before Starting Playback

NOTE

Loading the Batteries in the Remote

Control

Connecting the Power Cord

• Do not subject the remote control unit to shock, water

or excessive humidity.

• The remote control unit may not function if the Player’s

remote sensor is in direct sunlight or any other strong

light.

Plug the supplied AC cord into the AC IN terminal on

the rear of the Player (1). Then plug into AC outlet

(2).

1 Hold in the tab on the battery cover and pull the

cover towards the direction of the arrow.

• Incorrect use of batteries may cause them to leak or

burst. Read the battery warnings and use the batteries

properly.

• Do not mix old and new batteries, or mix different

brands.

• Remove the batteries if you will not use the remote

control unit for an extended period of time.

2 Load the two “AA” size batteries (R-06 size,

UM/SUM-3). Place batteries with their terminals

corresponding to the m and n indications in

battery compartment.

Approximate operating range of

remote control

Remote control sensor

NOTE

• Place the Player close to the AC outlet, and keep the

power plug within reach.

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH THE UN-INSULATED PARTS OF ANY CABLES

WHILE THE AC CORD IS CONNECTED.

• The POWER (ON/STANDBY) indicator blinks while the

Player is preparing for starting up. You cannot turn the

Player on until the POWER (ON/STANDBY) indicator

stops blinking.

• If you are not going to use this Player for a long period

of time, be sure to remove the AC cord from the AC

outlet.

3 Insert the smaller tab of the battery cover into

the opening 1, and press down on the cover

until it clicks in place 2.

15º

*Approx. 22 feet (7m)

30º

15º

WARNING

Remote control unit

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a

heater.

This can cause batteries to leak, overheat, explode or

catch fire.

It can also reduce the life or performance of batteries.

Before Starting Playback

Turning the Power On

Turning the power on

Indicators on the Player

Press POWER on the remote control or on the

Player to turn on the power of the Player.

POWER (ON/STANDBY) indicator

Green on

Red blinks

Red on

Power on

Preparing for standby

Standby

NOTE

BD/DVD/CD mode indicator

• When you turn on this player for the first time after

purchase or when you turn on this player after you

perform “System Reset” (see page 45), the language

setting screen will be displayed, so please perform the

language setting (see step 4 of page 22).

Blue on

Playing back

Loading a disc

Blue blinks

Entering standby

Press POWER on the remote control or on the

Player to enter standby.

1 POWER button

2 POWER (ON/STANDBY) indicator

3 BD/DVD/CD mode indicator

• If you press POWER again immediately after entering

standby, the Player may not turn on. If this happens,

wait for 10 seconds or more and then turn on the power

again.

NOTE

• When the POWER (ON/STANDBY) indicator is blinking

(may take some time), the Player cannot be turned on.

Before Starting Playback

Language Setting

Operating a SHARP TV Using the

Remote Control

Turning Off the LCD Backlight and

Indications

The Universal Remote Control may operate the

basic functions of the SHARP TV.

If you feel that the indicators on the player’s front

display are too bright when watching movies, you

can turn them off except for the POWER (ON/

STANDBY) indicator.

TV function control

• TV Power: POWER

• TV-AV Selector: INPUT

• TV Volume up/down: VOL e/f

• TV Channel up/down: CH r/s

Changing the on-screen display

language

1 Press a/b to select “Settings”, then press d or

ENTER.

2 Press a/b to select “On Screen Language”,

1 Press a/b to select “Settings”, then press d or

then press d or ENTER.

ENTER.

2 Press a/b to select “Smart Settings”, then

Audio Video Settings

Smart Settings

AQUOS LINK

Playback Setting

On Screen Language

Communication Setup

Version

USB Memory Management

Video

press d or ENTER.

Music

3 Press a/b to select “Front Display/LED”, then

press d or ENTER.

Picture

4 Press a/b to select “On” or “Off”, then press

e-Contents

ENTER.

Software Update Settings

Settings

System

5 Press HOME or EXIT to exit.

3 Press a/b to select the language you want to

display on the screen, then press ENTER.

NOTE

• To select the DVD disc language, such as subtitle

language, etc., see page 26.

Before Starting Playback

Using AQUOS LINK

AQUOS PURE MODE

NOTE

When you connect this player to an AQUOS LCD

TV compatible with AQUOS LINK and set “AQUOS

LINK” to “Yes” (page 43), images automatically

adjusted to the most suitable image quality for the

AQUOS TV are output from the HDMI OUT terminal

of this player.

• The 3D mode can be switched only when playback is

stopped.

• Depending on the connected TV, the images during

playback may switch to 2D images due to changes in

the resolution, etc. Make sure the 3D image setting is

performed on the TV.

• The 3D images may not be output as set in “HDMI

Video Out”.

• When performing Fast Forward/Reverse, images are

shown in 2D.

Controlling the Blu-ray disc player

using AQUOS LINK

What is AQUOS LINK?

NOTE

Using the HDMI CEC (Consumer Electronics

Control), with AQUOS LINK you can interactively

operate this player with your SHARP AQUOS TV.

• In order to make AQUOS LINK available, connect an

LCD TV to this player using an HDMI terminal. Set

“AQUOS LINK” to “Yes” (See page 43).

Refer to the Operation Manual of the TV for details

regarding setup.

What you can do with AQUOS LINK

CAUTION

When you connect this player to the LCD TV

compatible with AQUOS LINK using an HDMI cable,

you can perform the functions listed below. (See

page 16 for connecting to the HDMI terminal).

• When viewing 3D images, viewing for a long period

of time or lying on your back may cause eye strain

and discomfort. In addition, 3D images may affect the

eyesight of young children/infants, so keep them from

viewing the images.

Using 3D

Automatic input select function

This sets output of 3D images.

To view 3D images, playback of 3D content (3D BD

video) is necessary with a 3D compatible TV and 3D

glasses in addition to this player.

When you start playback of this player, the input

selector of the LCD TV will automatically switch to

the LCD TV input terminal connected to the player

and the playback image will appear on the screen,

even if you are watching a TV program.

Automatic power off function

Press 3D to change to the 3D mode.

• Each time the button is pressed, the mode switches

between “Auto(3D)” and “2D”.

• The status of the selected mode will be displayed on the

TV screen.

If you turn off the LCD TV when this player is in stop

mode, the power of this player will be turned off

automatically. (However, when playing back a disc

or other content using this player, the power does

not turn off.)

Auto: Video signals are output as 3D when 3D content (3D

BD video) is played or as 2D when 2D content is played.

2D: Even if 3D content (3D BD video) is played, video

signals are output as 2D at all times.

Automatic power on function

When you switch to the LCD TV input terminal

connected to this player, the power of this player will

be turned on automatically.

• This setting (Auto(3D)/2D) can also be performed using

the menu screen (See page 44).

Before Starting Playback

Control Panel

Major functions of each button icon

This function allows you to operate this player using

the TV remote control by displaying the control

panel on the TV screen.

• Display the pop-up menu screen for BD

video and the menu screen for DVD video.

POP-UP

TOP MENU

TITLE LIST

FUNC.

• To operate this function, connect this player to a TV

compatible with HDMI CEC (Consumer Electronics

Control) using an HDMI cable (See page 16). Make

sure that “Control Panel” is set to “Yes” (See page 43).

When the settings are completed, perform the following

operations.

• Display the top menu screen for BD video

and DVD video.

TOP MENU

TITLE LIST

• Display the Function Control screen for BD

video, DVD video, etc.

FUNC.

NOTE

• The control panel may not be displayed depending on

the TV. Also, it may not be available depending on the

content.

• When operating using the remote control of the player,

the control panel does not appear.

• Fast reverse (search).

• Play.

INSTANT

REPLAY

SKIP

• When playing video on demand streaming content

available with this player, the control panel cannot be

displayed.

PANEL

OFF

Select

Enter

• Fast forward (search).

• Skip to the beginning of a chapter.

• Pause.

1 Switch the TV input to the input source to which

• When there is no operation for approximately

10 seconds, the control panel disappears

automatically.

To display the control panel, press the PLAY button

on the TV remote control.

this player is connected (HDMI input).

2 Press the PLAY button on the TV remote control.

• The control panel appears on the TV screen.

3 Press a/b/c/d on the TV remote control

to select the desired button icon, then press

ENTER.

• The function of the selected button icon is available.

• Skip to the next chapter.

• Jump backward (approx. 10 seconds).

(This function is used when you want to re-

watch a scene that has just been shown.)

INSTANT

REPLAY

• Stop.

SKIP

• Jump ahead (approx. 30 seconds).

• Turn off the control panel.

PANEL

OFF

Video/Picture/Music Playback

NOTE

Loading a Disc

BD/DVD Video Playback

• The disc load time may vary depending on the disc.

BD VIDEO

BD-RE

BD-R

Regarding playback of BD video discs

• Some of the newly released BD video discs cannot be

played back unless you update the player software

to the latest version. Therefore, it may be required to

update the software of the player.

• Refer to pages 51–54 for more information regarding

software updates for the player.

DVD VIDEO

DVD-R DVD-RW

This section explains playback of commercially

available BD Video and DVD Video discs (like

movies) and recorded DVD-RW/R discs.

• This player supports DVD upscaling during DVD

playback.

POWER

OPEN/CLOSE

• For a description of other playback functions, refer to

“Playback Functions” on pages 35–37.

To stop playback

Press c.

Resume playback function

• If you press a next, playback will resume from

the point where the Player was previously stopped. To

playback from the beginning, cancel resume mode by

pressing c, then press a. (This may not

work depending on the type of disc. In this case, open

the disc tray or enter standby.)

1 Press POWER to turn on the power.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc on the disc tray.

• Insert the disc with the label face up.

• In case of disc recorded on both sides, face down

the side to play back.

NOTE

• Resume playback may not function depending on the

disc.

• The resume playback function for discs will be cancelled

if video on demand streaming content is viewed

after disc playback. Disc playback will start from the

beginning after viewing streaming content.

1 Load a disc.

• Playback may begin automatically, depending on

the disc.

• Playback begins from the first title.

• The menu may be displayed first, depending on the

disc. Perform playback operation by following the

directions on the screen.

4 Press OPEN/CLOSE to close the disc tray.

• When loading a disc containing 3D content (3D BD

video) with “Yes” selected in the “3D Notice” setting

(page 45), playback will be stopped and the 3D

notice will be displayed on the TV screen. In such

cases, press ENTER for confirmation, and then

playback will start.

2 Press a if playback does not begin

automatically or playback is stopped.

Video/Picture/Music Playback

NOTE

Displaying the disc information

BD/DVD Menus

• The procedure explained on this page is the basic

operation procedure. Procedures vary depending on

the BD/DVD video disc, so you may need to follow the

instructions in the BD/DVD video disc manual or the

instructions displayed on the screen.

• This section explains how to play back a BD/DVD

video disc with a top menu, disc menu or pop-up

menu.

• The titles listed in the top menu and a disc guide

(for options like subtitles and audio languages) are

given in the disc menu.

Top menu

• With some BD/DVD discs, the top menu may be

referred to as the “Title Menu”. Use TOP MENU/TITLE

LIST on the remote control when the instructions refer

to “Title Menu”.

Press DISPLAY during playback.

• Each time you press DISPLAY, the display switches

as follows.

• If no top menu is available, the TOP MENU/TITLE LIST

button will have no effect.

BD-VIDEO

Disc Information

screen A

Using the disc menu

1/1

1/101

00:00:12

/03:12:28

DVD VIDEO

Example: Select “SUBTITLE LANGUAGE”.

Start playback by selecting a title

from the top menu

1 Press TOP MENU/TITLE LIST.

• The disc menu screen is displayed if present on the

DVD video disc.

00:00:12

/03:12:28

Disc Information

screen B

BD VIDEO DVD VIDEO

2 Press a/b to select “SUBTITLE LANGUAGE”,

then press ENTER.

1 Press TOP MENU/TITLE LIST.

• The top menu screen is displayed if present on the

BD/DVD video disc.

No Display

• The screen for selecting the subtitle language is

displayed.

1 Type of disc

Example

2 Title number being played / Total number of

Example

Titles

3 Chapter number being played / Total number

of Chapters

4 Elapsed playback time / Total playback time

for the Title

T O P M E N U

AUDIO LANGUAGE

SUBTITLE LANGUAGE

AUDIO

Jazz

Latin

Classic

Rock

NOTE

• Disc Information Screen A disappears after about 1

minute elapses without performing any operations.

• For some commercially-released BD VIDEO discs, the

total playback time display for the Chapter/Title may not

appear.

2 Press a/b/c/d to select the title, then press

ENTER.

3 Press a/b to select the subtitle language, then

press ENTER.

• The selected title is played back.

4 Press TOP MENU/TITLE LIST to exit.

Video/Picture/Music Playback

Rear

Using the pop-up menu

Enjoying BONUSVIEW or BD-LIVE

BD VIDEO

This Player is compatible with additional functions of

BD-Video, BONUSVIEW (BD-ROM Profile 1 Version

1.1) and BD-LIVE.

For BD-Video discs compatible with BONUSVIEW,

the functions of Picture in Picture and Virtual

Package are available. For BD-LIVE compatible

discs, you can enjoy a variety of functions via the

Internet in addition to the BONUSVIEW functions.

1 Press POP-UP MENU during playback.

• The pop up menu screen is displayed.

• The menu contents displayed vary depending on

the disc. For details on how to see and operate the

pop-up menu, refer to the manual for the disc.

USB memory device

• If there is insufficient storage space, the data will not

be copied/downloaded. Delete unneeded data or use a

new USB memory device.

• If a USB memory device containing other data

(previously recorded) is used, the video and audio may

not play back properly.

• If the USB memory device is disconnected from this

player during playback of Virtual Package/BD-LIVE data,

playback of the disc will stop.

• Some time may be required for the data to load (read/

write).

Example

Pop-up menu

Virtual Package/BD-LIVE data is saved in Local

Storage (USB memory device connected to this

Player). To enjoy these functions, connect a USB

memory device (2GB or greater) supporting USB

2.0 High Speed (480Mbit/s) to the USB1 or USB2

terminal on this player.

2 Press a/b/c/d to select the desired item,

then press ENTER.

• Refer to “USB Memory Management” on page 50 for

erasing the Virtual Package data and the BD-LIVE data

in the USB memory device.

3 Press POP-UP MENU to exit.

• The pop-up menu will automatically disappear for

some discs.

When the wireless LAN adapter is not inserted into the

USB1 terminal on the rear of the player, it is recommended

that the USB memory device be connected to the USB1

terminal. (When you insert or remove a USB memory

device, be sure to turn the main power off and make sure

that “Quick Start” is set to “No” (See page 43).)

NOTE

• SHARP cannot guarantee that all brands’ USB memory

devices will operate with this player.

• Only USB memory devices formatted with FAT 32/16 are

compatible.

When formatting a USB memory device using a PC,

perform the following settings.

− Format File System: FAT32

− Allocation Unit Size: Default Allocation Size

• Do not use a USB extension cable when connecting a

USB memory device to the USB terminal of the player.

− Using a USB extension cable may prevent the player

from performing correctly.

NOTE

• A USB memory device can be used with either the

USB1 or USB2 terminal. When two USB memory

devices are connected to both terminals at the same

time, in certain situations the USB1 terminal may give

priority to Local Storage and the USB2 terminal cannot

be used for Local Storage.

Video/Picture/Music Playback

NOTE

Use of Picture in Picture function

(secondary audio/video playback)

Virtual Package

• Regarding playback method of BD-LIVE contents,

etc., perform the operations in accordance with the

instructions in the BD disc manual.

• To enjoy BD-LIVE functions, perform the broadband

Internet connection (pages 18–19) and communication

settings (pages 46–49).

• Before using this function, please read “Network Service

Disclaimer” (page 69).

• Refer to page 44 regarding the setup to restrict access

to BD-LIVE contents.

For BD-Video discs compatible with Virtual

Package, data is copied from the discs or Internet to

local storage. It is automatically copied to the local

storage prior to playback. You can enjoy a variety

of additional functions including secondary video,

secondary audio, subtitles, movie trailers, etc.

• The playback methods vary depending on the disc. For

details, refer to the disc manual.

BD-Video that includes secondary audio and

video compatible with Picture in Picture can be

played back with secondary audio and video

simultaneously as a small video in the corner.

• If the BD-LIVE screen does not appear for a while after

you select the BD-LIVE function in the BD disc menu,

the USB memory device may not have enough free

space. In such cases, eject the disc from the player, and

then erase the data in the USB memory device in the

“USB Memory Management” menu on page 50.

BD-LIVE

In this Player, a variety of contents with interactive

functions are available through BD-LIVE compatible

Blu-ray discs by connecting to the Internet. You

can enjoy the download of bonus features such as

latest movie trailers to the USB memory device,

communication compatible BD-J interactive games,

etc.

1 Press PinP during playback to show the

2-picture screen.

• The available functions differ depending on the disc.

Primary audio/

video

Secondary audio/

video

2 To remove the secondary video, press PinP

again.

NOTE

• To listen to secondary audio, make sure that “Secondary

Audio” is set to “On”. (See page 42.)

• The secondary audio and video for Picture In Picture

may automatically play back and be removed

depending on the content. Also, playable areas may be

restricted.

Video/Picture/Music Playback

About Title List

DVD-R/-RW (VR format) / BD-RE/-R

(BDAV format) Playback

Playback by selecting a title

• The Title List can be displayed in two types,

Thumbnail and Title Name.

1 Load a recorded disc.

• Each time you press A (Red), the screen changes

between Thumbnail and Title Name.

DVD-R DVD-RW

BD-RE

BD-R

• The Title List screen is displayed.

Example: Thumbnail screen

You can play back a recorded disc (DVD: VR format

finalized disc only / BD: BDAV format disc only).

• For a description of other playback functions, refer to

”Playback Functions” on pages 35–36.

Thumbnail

Program 1

5/21 Fri 9:30 AM 110 Min.

Program

㪜㪯㪠㪫

Select

Title Name

Enter

By Chapter

Return

Playlist

Exit

Functions

㪜㪯㪠㪫

Select

Title Name

Enter

By Chapter

Return

Playlist

Exit

Functions

• If the Title List screen is not displayed, press TOP

MENU/TITLE LIST.

• When loading a BD disc with usage restrictions

placed by a BD recorder, the password input screen

appears. Then, input your password.

If you input a wrong password three times, the disc

tray will open. Close the disc tray, and then input a

correct password.

Title Name

Program 1

5/21 Fri 9:30 AM 110 Min.

1 Program 1

Program

5/21 Fri 110 Min.

6/15 Fri 110 Min.

7/3 Mon 56 Min.

9/18 Thu 40 Min.

9/20 Sat 20 Min.

9/25 Thu 60 Min.

2 Program 2

3 Program 3

4 Program 4

5 Program 5

6 Program 6

[From Old]

2 Press a/b/c/d to select the desired title, then

NOTE

press ENTER to start playback.

• “Finalize” refers to a recorder processing a recorded

disc so that it will play in other DVD players/recorders

as well as this player. Only finalized DVD discs will play

back in this player. (This player does not have a function

to finalize discs.)

• Some discs cannot be played back depending on the

audio format.

• BD-RE/-R discs recorded from a BD recorder comply

with AACS copyright protection technology. As this

player is not intended to be compliant with AACS, such

discs cannot be played back.

• If you want to select additional titles, switch pages

by pressing f or g.

• You can playback by pressing a instead of

pressing ENTER.

1/All 8 Titles

㪜㪯㪠㪫

Select

Thumbnail

Enter

Return

Playlist

Exit

Functions

Sorting

3 Press c to stop playback.

1 Information of selected title

2 Title Name

Recording Date

Recording Duration

3 Button Guide

NOTE

• The Title List screen also can be displayed by pressing

TOP MENU/TITLE LIST when playback is stopped.

(AACS: Advanced Access Content System)

Video/Picture/Music Playback

Playback by selecting a chapter

Playback by selecting a Playlist

Playback from the beginning or

resume playback

1 Press B (Green) while the Thumbnail screen is

displayed.

1 Press C (Blue) while the Title List screen is

displayed.

When you play back the title from the Title List after

you stopped playback, you can select playback

from the beginning or from the point where it was

last stopped.

• The chapter screen is displayed.

• The Playlist screen is displayed.

Example: Thumbnail screen

Chapter

Program 1

1 Press D (Yellow) when the desired title is

5/21 Fri 9:30 AM 110 Min.

selected while the Title List screen is displayed.

Chapter

Program

2 Press a/b to select the type of Playback, then

press ENTER to start playback.

• The type of Playback may be selected from “From

Beginning” or “From Continued”.

• If you want to select additional chapters,

switch pages by pressing f or

Program

3 Press c to stop playback.

㪜㪯㪠㪫

Select

Title Name

• To return to the Thumbnail screen, press B (Green).

Enter

By Chapter

Return

Original

Exit

Functions

2 Press a/b/c/d to select the desired chapter,

then press ENTER to start playback.

• You can playback by pressing a instead of

pressing ENTER.

2 Press a/b/c/d to select the desired title, then

press ENTER to start playback.

3 Press c to stop playback.

Sorting the titles

Each time you press B (Green) while the Title Name

screen is displayed, the Title Name display changes

between displaying the newest title first and the

oldest title first.

Video/Picture/Music Playback

2 Press a if playback does not begin

Audio CD Playback

Operation procedure for the

“Functions” menu

automatically or playback is stopped.

AUDIO CD

3 To pause the playback at any time, press

1 Press D (Yellow) (Functions) when the CD screen

is displayed.

• Press b or a to return to playback.

This Player can play back audio CDs.

• For a description of other playback functions, refer to

“Playback Functions” on pages 35–36.

4 Press c to stop playback.

• The “Functions” menu is activated.

Playback by selecting a track

1 Press a/b to select the track, then press

ENTER during playback or when playback is

stopped.

• Playback of the selected track will begin.

2 Press a/b to select the desired setting, then

press ENTER.

• When playback is stopped, only “Track” can be

selected.

• For a description of each setting, see “Functions

which can be set” (Page 39).

3 Press a/b/c/d to set, then press ENTER.

• Operations vary depending on the setting. Follow

the operation instructions on the screen.

2 Press c to stop playback.

Playback from the beginning

4 Press j or D (Yellow) to exit the

1 Load an audio CD.

• The CD screen is displayed.

“Functions” menu.

(The CD screen is displayed only when a compact

disc recorded in the CD-DA format is inserted.)

• Playback may begin automatically, depending on

the disc.

NOTE

• The displayed items vary depending on the disc.

Video/Picture/Music Playback

1 Load a disc or insert a USB memory device

containing audio data (MP3 files).

5 Press ENTER to play back the selected file.

Audio Data (MP3 File) Playback

• Playback of the selected file will begin.

• When the wireless LAN adapter is not inserted

into the USB1 terminal on the rear of the player, it

is recommended that the USB memory device be

connected to the USB2 terminal.

CD-R

CD-RW

DVD-R DVD-RW

USB

This Player can play back audio data (MP3 files)

recorded on CD-R/RW discs, DVD-R/RW discs and

USB memory devices or via a home network.

• For details on the audio data that you can play using

this player, refer to page 11.

NOTE

• A USB memory device can be used with either the

USB1 or USB2 terminal. When two USB memory

devices are connected to both terminals at the same

time, in certain situations the USB1 terminal may give

priority to Local Storage and MP3 files cannot be played

back using this terminal.

• When MP3 files are played, the “Functions” menu is

not available.

2 Press a/b to select “Music”, then press d or

List of available buttons during playback

ENTER.

3 Press a/b to select “DVD/CD ”, “USB Memory

Buttons

a/b

Description

Select a desired audio file.

Play back audio file.

Device” or “Home Network”, then press d or

ENTER.

Display name varies depending on the type of

media inserted.

ENTER

Pause audio file playback.

• Return to playback when

paused.

• If only a “DVD/CD” or a USB memory device is

inserted, the “DVD/CD” or “USB Memory Device”

selection screen does not appear. In such cases,

after step 2, proceed to step 4.

Skip backward.

Skip forward.

Stop playback.

4 Press a/b to select a folder or file.

• When you select a folder, press ENTER to open it,

and then press a/b to select a file in the folder.

NOTE

• When you insert or remove a USB memory device, be

sure to turn the main power off and make sure that

“Quick Start” is set to “No” (See page 43).

Folder 1

NOTE

• The Fast Forward/Reverse function does not work.

• The Repeat function does not work.

• When data in the USB memory device is played back,

playback from the USB memory device will stop when

OPEN/CLOSE on the remote control or the player is

pressed or when a disc is inserted into the player.

1 Folder 1

2 Folder 2

3 Folder 3

4 Folder 4

5 Track 01.mp3

6 Track 02.mp3

1/All 14 files and folders

Video/Picture/Music Playback

1 Load a disc or insert a USB memory device

containing Still Images (JPEG files).

5 Press ENTER to display the selected file.

Displaying Still Images (JPEG files)

• The selected still image appears on the screen.

• When the wireless LAN adapter is not inserted

into the USB1 terminal on the rear of the player, it

is recommended that the USB memory device be

connected to the USB2 terminal.

CD-R

CD-RW

DVD-R DVD-RW

USB

1/77

This Player can display still images (JPEG files)

recorded on CD-R/RW discs, DVD-R/RW discs and

USB memory devices or via a home network.

• For details on the still images that you can display using

this player, refer to page 11.

• Still images are played one by one while during “Slide

show”, they are automatically replaced one after

another.

NOTE

• A USB memory device can be used with either the

USB1 or USB2 terminal. When two USB memory

devices are connected to both terminals at the same

time, in certain situations the USB1 terminal may give

priority to Local Storage and JPEG files cannot be

played back using this terminal.

Operational buttons during still image

display

2 Press a/b to select “Picture”, then press d or

ENTER.

Buttons

Description

3 Press a/b to select “DVD/CD ”, “USB Memory

Go to the previous/next picture in

the same directory.

Device” or “Home Network”, then press d or

ENTER.

Display name varies depending on the type of

media inserted.

• If only a “DVD/CD” or a USB memory device is

inserted, the “DVD/CD” or “USB Memory Device”

selection screen does not appear. In such cases,

after step 2, proceed to step 4.

Return to the selection screen.

A (red)

Rotate the picture by 90 degrees

to the left.

4 Press a/b to select a folder or file.

• When you select a folder, press ENTER to open it,

and then press a/b to select a file in the folder.

B (green)

Rotate the picture by 90 degrees

to the right.

Play back Slide Show.

• Return to slide show playback

when paused.

Folder 1

NOTE

• When you insert or remove a USB memory device, be

sure to turn the main power off and make sure that

“Quick Start” is set to “No” (See page 43).

Pause slide show playback.

1 Folder 1

2 Folder 2

3 Folder 3

4 Folder 4

5 Image 01.jpg

6 Image 02.jpg

Stop still image display/slide show

playback.

NOTE

1/All 14 files and folders

• Thumbnail data will be displayed when JPEG files from

a digital camera contain thumbnail data.

• An icon will be displayed for JPEG files which do not

contain thumbnail data.

• To set slide show speed/repeat playback, press D

(Yellow) (Slide Show Menu).

• When data in the USB memory device is played back,

playback from the USB memory device will stop when

OPEN/CLOSE on the remote control or the player is

pressed or when a disc is inserted into the player.

Video/Picture/Music Playback

Accessing DLNA servers

4 Press a/b to select a DLNA server which you

want to access, then press ENTER or d.

• The folder list or file list of the DLNA server which

you accessed is displayed.

NOTE

• Some files may not be playable depending on the file.

For details, refer to pages 10–11.

The player can browse and play movies, music and

photos stored on your DLNA Certified media servers

connected within your home network.

• To enjoy this function, make a broadband Internet

connection to both your PC and this player (See pages

18–19), and then set communication settings (See

pages 46–49), then perform the following operation.

• To use this function, we recommend setting “Auto

Power Off” to “No”. (See page 43.)

• The previous screen appears when j

is pressed.

5 Press a/b to select the folder or file which you

want to access, then press ENTER.

• When you select a folder, the file list of the folder is

displayed. Press a/b to select the file which you

want to play, then press ENTER.

About a home network

This Player can display and play movies, photos

and music content from your DLNA-compatible

digital media servers (such as a PC and consumer

electronics).

• Before using this function, please read “Network Service

Disclaimer” (page 69).

• Playback starts.

Root

Playback by selecting a file list

Before accessing DLNA servers:

• DLNA servers and this player must be connected to the

same local area network. Specify the settings required

for connecting this player to the local area network.

• DLNA servers must be turned on.

• When a PC running DLNA server software or other

DLNA-compatible devices are connected to this player,

some setting changes of software or other devices may

be required.

1 Press a/b to select Video/Music/Picture, then

Folder1

Folder2

press d or ENTER.

2 Press a/b to select “Home Network” in the sub

Video01.divx

Video02.divx

Video03.divx

Video04.divx

1/ALL 40 files and folders

window.

Video

BD-Video

USB-1

• Please refer to the operating instructions for the

software or devices for more information.

Music

• For operation during playback, refer to pages

35–36.

Picture

e-Contents

Settings

Home Network

6 Press c to stop playback.

• The file list reappears.

• The previous screen appears when j

is pressed.

Sub Window

7 Press EXIT or HOME to exit playback.

• The HOME screen reappears.

3 Press ENTER or d.

• The player automatically scans and displays DLNA

servers within your local network.

Video

BD-Video

USB-1

Music

Picture

e-Contents

Settings

Home Network

Select server

1. xxxxxxxxxxxxx

2. yyyyyyyyyyyyy

3. zzzzzzzzzzzzzz

4. aaaaaaaaaaaa

Types of playable files

Video

DivX Plus HD (avi/divx/mkv)

Music

Picture

mp3

jpg

Playback Functions

Fast Forward/Reverse (Search)

Pause/Frame Advance Playback

BD VIDEO

DVD VIDEO

AUDIO CD

BD-R

BD-RE

BD VIDEO

BD-R

BD-RE

DVD-R DVD-RW

DVD VIDEO

DVD-R DVD-RW

The Pause function is enabled when b is

pressed during playback. (If you are playing back

an audio CD, audio data [MP3 files] or still images

[JPEG files], these will also pause.)

The Fast Forward/Reverse function is enabled when

d or e is pressed during playback.

Example: When e is pressed

• The search speed will change each time you press the

button.

The Frame Advance Playback function is enabled

when g is pressed during pause.

• Frame Advance Playback may not function properly

with discs other than DVD-RW/R (VR format).

When playing back a DVD

• You cannot perform Fast Forward/Fast Reverse from

one title and continue to another title (except when

playing audio CDs). At the end or beginning of the title,

Fast Forward/Fast Reverse will be cancelled and normal

playback will automatically resume.

NOTE

• Some BD/DVD Video discs are not compatible with

Pause/Frame Advance Playback.

• Frame Advance/Reverse Playback can be performed

for DVD discs by pressing g or

f during pause.

NOTE

• Subtitles are not played back with BD/DVD video discs

during Fast Forward and Fast Reverse.

Slow Playback (Forward/Reverse)

Skipping to the Next or the Start of

the Current Chapter (Track/Title)

BD VIDEO

BD-R

BD-RE

DVD VIDEO

DVD-R DVD-RW

BD VIDEO

DVD VIDEO

AUDIO CD

BD-R

DVD-R DVD-RW

CD-R CD-RW

BD-RE

NOTE

• Some operations in the following playback functions

cannot be performed depending on the specifications of

the disc.

The Slow Playback (Forward/Reverse) function is

enabled when g or f is

pressed for more than 2 seconds during pause.

Press a to return to normal playback.

USB

The Skipping (to the beginning of a chapter, track

or title) function is enabled when f or

g is pressed during playback.

NOTE

• This doesn’t work for audio CDs.

• You cannot perform Slow Playback between titles. At

the end of the title, Slow Playback will be cancelled and

normal playback will automatically resume.

• Reverse Slow Playback cannot be performed for BD

video and DVD discs in AVCHD format.

Playback Functions

5 Press ENTER.

4 Press ENTER at the scene where you want to

set the start point.

Repeat Playback of a Title or

Chapter (Repeat Playback)

Example: Repeat playback of a title (TITLE)

• “Set End Point” displays.

BD-VIDEO

5 Press ENTER at the scene where you want to

BD VIDEO

DVD VIDEO

AUDIO CD

BD-R

BD-RE

set the end point.

1/3

5/25

00:20:30

2 English

DVD-R DVD-RW

• You can press e to fast forward to the

scene where you want to set the end point. When

you reach the desired scene, simply press a

and then ENTER to set the end point.

1 DTS

On Title Repeat

1 Play back the title or chapter you want to repeat.

NOTE

2 Press FUNCTION.

• Press g, the Repeat Playback is

cancelled and the next chapter being play back.

• Press f once, the Repeat Playback is

cancelled and the player returns to the start of current

chapter (track).

• If you press f again (within about 5

seconds) the player will skip to the beginning of the

previous chapter (track).

• For Partial Repeat Playback, set the start and end

points within the same title.

• Repeat Playback may be forbidden depending on the

disc.

• The Function Control screen is displayed on the TV.

3 Press a/b to select the Repeat column, then

press ENTER.

On Title Repeat

4 Press a/b to select the type of Repeat

Playback.

• Playback Title: Repeats the title currently being

played back.

6 Press j or FUNCTION to close the

Function Control screen.

• Playback Chapter: Repeats the chapter currently

being played back.

• Scene Selection: Repeats the specified scene of

title or chapter.

NOTE

• “Scene Selection” operation is not available for BD

video.

• Partial Repeat Playback may not work in multi-angle

scenes.

• If you press DISPLAY, you can confirm the Repeat

Playback status.

NOTE

• Press j to cancel without setting the type

of Repeat Playback.

• For Audio CD, you can select “Playing Disc”, “Playing

Track” and “Specify The Part” as Repeat Playback

options.

Partial Repeat Playback (Repeat

Playback of a Specified Part)

DVD VIDEO

DVD-R DVD-RW

AUDIO CD

1 Press FUNCTION during playback.

• The Function Control screen is displayed on the TV.

2 Press a/b to select the Repeat column, then

press ENTER.

3 Press a/b to select “Scene Selection”, then

press ENTER.

• “Set Start Point” displays.

Playback Functions

2 Press a/b to select the Angle Number column,

Displaying the Audio Information

Switching Subtitles

then press ENTER.

BD VIDEO DVD VIDEO

You can display the audio information on the disc

currently being played back by pressing AUDIO.

The displayed contents vary depending on the disc.

BD-VIDEO

If subtitles are provided in multiple languages, you

can switch between them.

1/3

5/25

00:20:30

2 English

1 DTS

Off

BD VIDEO DVD VIDEO

Press SUBTITLE during playback.

The audio channel currently being played back will

be displayed.

If multiple audio channels are recorded, you can

switch the audio channel by pressing AUDIO.

• The display indicates the subtitle number currently

being played back, and the subtitles appear.

Each time SUBTITLE is pressed, the subtitles change.

• “–” is displayed if a disc has no subtitles.

• You can also select “Off”.

3 Press a/b to select the desired Angle Number,

then press ENTER.

DVD-RW DVD-R

4 Press j or FUNCTION to close the

NOTE

Function Control screen.

When a recorded broadcast with stereo or

monaural audio is played back:

“Stereo” is displayed. (Audio cannot be switched.)

• Settings for subtitles can also be changed in the

Function Control screen (Page 38).

• The operation of subtitles differs according to each disc.

You may need to refer to the operation manual of the

disc.

• The display for subtitle information automatically

disappears after 5 seconds.

NOTE

• The displayed items vary depending on the disc.

• If you access the Function Control screen during

playback of a BD/DVD video, it may be impossible to

operate the BD/DVD video playback. In cases like this,

close the Function Control screen.

• The operation of angles differs according to each disc.

You may need to refer to the operation manual of the

disc.

NOTE

• When you play a program recorded in stereo or

monaural, and if you are listening to the Bitstream

sound via the digital output jack, you cannot select the

audio channel. Set “Audio Out” to “PCM” (page 42).

• Settings for audio can also be changed in the Function

Control screen (Page 38).

• The operation of audio differs according to each disc.

You may need to refer to the operation manual of the

disc.

Switching the Angle

• The display for angle information automatically

disappears after 5 seconds.

BD VIDEO DVD VIDEO

If multiple angles are recorded, you can switch

between them.

• The display for audio information automatically

disappears after 5 seconds.

Displaying the Angle Mark

1 Press FUNCTION during playback.

BD VIDEO DVD VIDEO

• The Function Control screen is displayed on the TV.

You can change settings so that Angle Mark appears

in the right bottom part of the screen when multiple

angles are recorded. The settings can be changed

in “Settings” – “Playback Setting” – “Angle Mark

Display” (Page 44).

Settings During Playback

3 Operation guide display

Provides help on remote control button operations.

3 Press a/b/c/d to set, then press ENTER.

• Operations vary depending on the setting. Follow

the operation instructions on the screen.

Function Control

BD VIDEO

DVD VIDEO

AUDIO CD

BD-R

BD-RE

4 Press j or FUNCTION to close the

Function control operation

procedure

DVD-R DVD-RW

Function Control screen.

NOTE

• If “– –” is displayed for an option like title number or

subtitles, the disc has no titles or subtitles which can be

selected.

• The displayed items vary depending on the disc.

• If you access the Function Control screen during

playback of a BD/DVD video, it may be impossible to

operate the BD/DVD video playback. In cases like this,

close the Function Control screen.

This allows you to adjust various settings at once,

like subtitles, angle settings and the title selection

for Direct Playback. You can adjust the video and

audio to suit your preferences. The operations are

the same for BD and DVD.

Function Control screen

BD-VIDEO

1/3

5/25

00:20:30

2 English

1 DTS

Off

1 Press FUNCTION during playback.

• The Function Control screen is displayed on the TV.

ENTER

Select

Exit

Enter

Return

2 Press a/b to select the desired setting, then

㪜㪯㪠㪫

press ENTER.

• For a description of each setting, see “Functions

which can be set” (Page 39).

1 Playback status display

Shows the operation status and the disc type.

BD-VIDEO

1/3

2 Setting items

Selects a title (or track) or chapter for playback, or

performs video/audio settings.

5/25

00:20:30

2 English

1 DTS

Off

• Title/Track Number (Direct Title/Track Skip)

• Chapter Number (Direct Chapter Skip)

• Playback Elapsed Time (Direct Time Skip)

• Subtitle Language

• Angle Number

• Audio

• Repeat

Settings During Playback

Subtitle Language

Functions which can be set

• Shows the currently selected subtitle language. If

subtitles are provided in other languages, you can

switch to your preferred language.

Title/Track Number (Direct Title/Track Skip)

• Shows the title number being played back (or track

number when playing back an audio CD). You can skip

to the start of the title (or track).

• To skip to the start of a selected title (or track), press

the Number buttons to enter the title (or track) number

when this option is highlighted.

Angle Number

• Shows the currently selected angle number. If the video

is recorded with multiple angles, you can switch the

angle.

Audio

Chapter Number (Direct Chapter Skip)

• Shows the currently selected type of audio. You can

select the desired type of audio.

• Shows the chapter number being played back. You can

skip to the start of the chapter.

• To skip to the start of a selected chapter, press the

Number buttons to enter the chapter number when this

option is highlighted.

Repeat

• The current Title (or Chapter) or partial segments can be

repeatedly played back.

Playback Elapsed Time (Direct Time Skip)

NOTE

• Shows the time elapsed from the beginning of the

current disc title (or track). This lets you skip to a

specific time.

• These functions may not work with all discs.

• Press c/d to select the Hour, Minute or Second, then

press a/b or the Number buttons to set the time.

Press ENTER to start playback at the set time.

Settings

SETTINGS

Common operations

The “menu” enables various audio/visual settings

and adjustments on the functions using the remote

control unit. You need to call up the On Screen

Display to perform settings for this player. The

following is the explanation for the basic operations

of the “menu”.

Home screen display

Press a/b to select “Settings”, then press d or ENTER.

HOME

Audio Video Settings

Smart Settings

AQUOS LINK

Playback Setting

On Screen Language

Communication Setup

Version

USB Memory Management

Software Update Settings

System

Video

Music

Picture

e-Contents

Settings

Example: Setting “AQUOS LINK”

Select

ENTER

EXIT

Enter

Return

Exit

Select a menu item

Press a/b to select “AQUOS LINK”, then press d or ENTER.

HOME

Audio Video Settings

Smart Settings

Video

AQUOS LINK

Music

Playback Setting

On Screen Language

Communication Setup

Version

USB Memory Management

Software Update Settings

System

Picture

e-Contents

Settings

Select

ENTER

EXIT

Enter

Return

Exit

Select the next item

Press a/b to select the desired item, then press ENTER.

Press j to return to the previous “menu” page.

Exit the menu screen

Press HOME or EXIT to exit.

SETTINGS

5 Press c/d to select the parental control level

for DVD VIDEO, BD-ROM, and then select the

country code. Press ENTER after making each

selection.

Basic Operation for Playback

Setting

Example: Setting “Parental Control” under “Playback

Setting”

Parental Control

Disc Language

Angle Mark Display

Password Setting

BD Internet Access

3D Mode

1 Press a/b to select “Settings”, then press d or

ENTER.

2 Press a/b to select “Playback Setting”, then

press d or ENTER.

Level 3

3D Notice

3 Press a/b to select “Parental Control”, then

press d or ENTER.

• When you operate this Player for the first time,

the password setting screen will be displayed.

See “When setting the password for the first time”

below.

USA

6 Press HOME or EXIT to exit.

4 Enter your 4-digit password.

• You cannot move to the next setting screen until

you can input the correct password.

When setting the password for the first time.

1 To set the password for the first time, press

a/b to select “Yes” to enter the password

setting menu, then press d or ENTER.

2 Enter a 4-digit number for the password, then

the same 4-digit number for confirmation.

3 Press ENTER to complete the password setting

procedure and move to the next setting screen.

SETTINGS

2 This sets the audio output mode for DIGITAL

AUDIO OUT (OPTICAL terminal) when selecting

“Digital Output”.

Audio Out

Audio Video Settings

You can set the audio output when connecting to

SURROUND equipment.

HDMI Video Out

Item

1 This sets the audio output connected to

Bitstream:

This sets the resolution of the video output for the

HDMI terminal of this player.

SURROUND equipment.

• Select this when connecting to SURROUND

equipment with a built-in decoder for DOLBY

DIGITAL, etc.

• Setting to Bitstream will output each audio signal by

Bitstream.

Normally set to “Auto” (factory preset value).

Item

HDMI Output: Select this when you connect using

HDMI OUT terminal.

Digital Output: Select this when you connect using

DIGITAL AUDIO OUT terminal (OPTICAL).

Auto, 1080p, 1080i, 720p, 480p

PCM:

• Select this when connecting to 2 channel stereo audio

equipment.

• Setting to PCM will output by converting each audio

signal into PCM 2 channel audio signal.

NOTE

• When the BD player is connected to a 1080p 24Hz

compatible TV and the “HDMI Video Out” is set to

“Auto”, 1080p 24Hz will automatically be displayed

when compatible discs are played back.

2 You can set the audio output mode for each

output terminal.

NOTE

1 This sets the audio output mode for HDMI OUT

• See page 54 for information on output of next

generation audio formats.

terminal when selecting “HDMI Output”.

Secondary Audio

NOTE

This toggles the clicking sound on the menu and

audio with secondary video in picture in picture

mode for BD-Video.

• Select “Off” when enjoying the high quality sounds of

BD-Video.

• When the secondary audio is set to “On”, PCM is

automatically selected as the audio output mode.

Item

Bitstream:

Item

• Select this when connecting to HDMI equipment with

a built-in decoder for DOLBY DIGITAL, etc.

• Setting to Bitstream will output each audio signal by

Bitstream.

On, Off

PCM (Surround):

• Select this when connecting to multi-channel HDMI

equipment.

• Setting to PCM (Surround) will output by LINEAR

PCM by decoding audio signals recorded in each

audio output mode such as DOLBY DIGITAL, DTS.

(Continued on the next page)

SETTINGS

Dynamic Range Control

Control Panel

Smart Settings

This lets you adjust the range between the loudest

and softest sounds (dynamic range) for playback

at average volume. Use this when it is hard to hear

dialog.

This lets you set display of the control panel on the

TV screen to on or off.

Quick Start

This turns the Quick Start function on and off.

When the Quick Start function is on:

• The startup time of the Player is reduced.

• However, power consumption will increase.

When the Quick Start function is off:

• The player will enter the low power consumption mode

when in standby condition.

Item

Yes, No

Item

Normal: The same audio output range is played as the

original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the

dynamic range of the audio is adjusted so that the

dialog portion can be heard easily. (If the audio

sounds abnormal, set to “Normal”.)

AQUOS LINK

This lets you set the Player to receive the control

signal from the AQUOS LINK remote control via the

HDMI cable.

Item

Yes, No

Auto: When you play back audio in the Dolby TrueHD

format, the dynamic range is automatically adjusted.

Item

Yes, No

NOTE

Lower the audio volume before setting. If you do not do

so, the speakers may emit a loud sound or excessive

output may be applied to the speakers.

• When “Quick Start” is set to “Yes”, the Player requires

some time to turn off.

NOTE

• For details, refer to the operation manual of TV.

Super Picture

Auto Power Off

This enhances the quality of video streaming images

with pixel by pixel processing technology.

This sets the Player so that power is automatically

shut off if playback is stopped and you do not

perform any operations for about 10 minutes.

Item

On, Off

Yes, No

Front Display/LED

If you feel that the indicators on the player’s front

display are too bright when watching movies, you

can turn them off except for the POWER (ON/

STANDBY) indicator.

Item

On, Off

SETTINGS

Disc Language (Disc Priority Language)

Password Setting

Playback Setting

This lets you select the language for subtitles, audio

and menus displayed on the screen.

This sets the password for setting or changing the

Parental Control Level.

Parental Control

This lets you set the Parental Control depending

on the disc content. The available Parental Control

Levels are shown below.

Item (Subtitle)

Item

Select the subtitle language you want to display.

Yes: Enter the 4-digit number.

The 4-digit password number needs to be entered

before the Parental Control Levels and the Country

Code are set. The Parental Control Levels and the

Country Code cannot be set if a password has not

been created or the password is not entered.

• Select the rating level appropriate for the age of the

user.

Item (Audio)

NOTE

Select the audio language you want to hear.

• When you forget the password, you can reset the

current password using “System Reset” under

“Settings”. (See page 45.)

Item (Menu)

Select the menu language you want to display.

• You can also set the new password if desired.

NOTE

Item (Parental control level for DVD-video)

BD Internet Access

• When “Auto” is selected, the priority language of the

disc will be played back.

8 and Off: All DVD-video can be played.

1–7: Prohibits play of DVD-video with corresponding

ratings recorded on them.

This allows you to set access restriction to BD-LIVE

contents.

Angle Mark Display

Item

Item (Parental control level for BD-video)

This lets you turn the Angle Mark Display on or off

when BD/DVD video recorded with multiple angles

is played back. (The Angle Mark is displayed in the

lower right screen.)

Permit: Allows all BD-LIVE discs.

Limit: Allows only discs with owner certification.

Prohibit: Prohibits all BD-LIVE discs.

No Limit: All BD-video can be played.

0–99 year(s): Prohibits play of BD-video with

corresponding ratings recorded on them.

NOTE

Item (Country code)

Item

• The available functions differ depending on the disc.

• Regarding playback method of BD-LIVE contents,

etc., perform the operations in accordance with the

instructions in the BD disc manual.

• To enjoy BD-LIVE functions, perform the broadband

Internet connection (pages 18–19) and communication

settings (pages 46–49).

Select the country code.

The ratings differ according to the country.

Yes, No

NOTE

• Refer to “Basic Operation for Playback Setting” on page

41 for details.

(Continued on the next page)

SETTINGS

3D mode

DivX Deregistration

Version

This sets output of 3D images.

You can deactivate your DivX information on the

player.

When you select “Version”, the system software

version and Netflix ESN are displayed.

To view 3D images, playback of 3D content (3D BD

video) is necessary with a 3D compatible TV and 3D

glasses in addition to this player.

Item

System

Yes, No

Item

System Reset

NOTE

Auto: Video signals are output as 3D when 3D content

(3D BD video) is played or as 2D when 2D content is

played.

• To learn more, visit www.divx.com/vod.

You can reset all settings to the factory presets.

2D: Even if 3D content (3D BD video) is played, video

signals are output as 2D at all times.

Item

VUDU Deactivate

Reset, Not Reset

You can deactivate your VUDU information on the

player.

CAUTION

Netflix Deactivate

• When viewing 3D images, viewing for a long period

of time or lying on your back may cause eye strain

and discomfort. In addition, 3D images may affect the

eyesight of young children/infants, so keep them from

viewing the images.

Item

You can deactivate your Netflix information on the

player.

Yes, No

Item

Yes, No

3D Notice

DivX Registration

This sets whether or not a notice is displayed (“Yes”

or “No”) on the connected TV every time 3D content

(3D BD video) is played.

The DivX registration code is displayed.

Item

Yes, No

NOTE

On Screen Language

• To learn more, visit www.divx.com/vod.

You can set the language you want to display on the

screen.

Item

English, Español, Français

SETTINGS

4 Press a/b to select “Change”, then press

Communication Setup

Sets whether “Cable” or “Wireless”

is used for the network connection

ENTER.

This allows you to perform and/or change the

communication settings and select the type of

Internet connection from Cable or Wireless. This

setting is required to use BD-LIVE functions, video

on-demand services (e-Contents), home networks

and software updates that connect to the Internet.

Current Ethernet setup info.

1 Press a/b to select “Settings”, then press d or

IP Address : Auto Setup

Netmask : Auto Setup

ENTER.

2 Press a/b to select “Communication Setup”,

Gateway

DNS

: Auto Setup

then press d or ENTER.

3 Press a/b to select “Cable/Wireless Select”,

NOTE

Change

Initialize

then press d or ENTER.

• Make sure that the LAN cable or the wireless LAN

adapter is connected to this player and make sure that

the wireless router/access point is connected to the

Internet if using the wireless LAN adapter. (See pages

18–19.)

• For manually performing the setting, the following

information of the connected router or modem is

required. Confirm the information prior to the setting.

− IP address, netmask, gateway, DNS address

4 Press a/b to select “Cable” or “Wireless”, then

press ENTER.

• For initializing the current setting, select “Initialize”,

• If selecting “Cable”, follow the [When selecting

Cable] directions on this page, then go to step 3.

• If selecting “Wireless”, follow the [When selecting

Wireless] directions on the next page, then go to

step 3.

then press ENTER.

5 For setting the IP address, press c/d to select

“Yes” or “No”, then press ENTER.

Do you obtain the IP address

automatically?

NOTE

• When selecting “Wireless” when the wireless LAN

adapter is not inserted, “Wireless LAN adapter is not

inserted” appears on the screen.

Yes

IP Address

Netmask

Gateway

When selecting Cable

1 Press a/b to select “Settings”, then press d or

• If selecting “Yes”: The IP address is automatically

obtained.

• If selecting “No”: The IP address, netmask and

gateway are manually entered using the screen for

inputting characters. (See page 49.)

Regarding each of the setup values, confirm the

specifications of your broadband router.

ENTER.

2 Press a/b to select “Communication Setup”,

then press d or ENTER.

3 Press a/b to select “Ethernet Setup (Cable)”,

then press d or ENTER.

(Continued on the next page)

SETTINGS

6 Select “Next”, then press ENTER.

5 The player scans all of the available access

points and displays the points with the “Other

Network” selection bar on the screen.

When selecting Wireless

• If selecting “Yes” in the step 5, go to the step 8.

7 Enter your DNS address.

CAUTION

• During searching access point(s), “Accessing...”

appears on the screen.

Enter your DNS address.

• We recommend writing down the MAC address of

the connected wireless LAN adapter in this operation

manual (page 48) and keeping it in a safe place. The

MAC address is labeled on the adapter or displayed on

the “Current Ethernet setup info.” screen (See step 5

below).

• When performing the wireless communication setup,

security information for the wireless router/access

point (WEP, WPA or WPA2 key) is required. Check your

wireless router/access point’s information prior to setup.

• Up to 6 items (5 access points and the “Other

Network” selection bar) are displayed on the screen.

• When there are six or more items retrieved, display

the next screen by selecting “Next”, then pressing

ENTER. (The “Other Network” selection bar is

always displayed last.) When no available access

points are retrieved, only the “Other Network”

selection bar is displayed on the screen.

Primary

Secondary

• The primary and secondary DNS addresses are

entered using the screen for inputting characters.

(See page 49.)

Regarding each of the setup values, confirm the

specifications of your broadband router.

6 Press a/b to select “desired access point” or

“Other Network”, then press ENTER.

• For access points which are set to hide the SSID

using the wireless router, select “Other Network” to

set the access point.

NOTE

• Wireless communication setup cannot be performed

when the wireless LAN adapter is not inserted.

• Before this player can access the Internet wirelessly,

setup of a wireless router/access point is required.

8 Select “Next”, then press ENTER.

9 For testing the connection to the Internet, after

confirming the settings, press a/b to select

“Test”, then press ENTER.

Select the access point.

1 Press a/b to select “Settings”, then press d or

• “Test” is available only when setting to obtain the IP

address automatically. “Test” cannot be selected if

the IP address has not been obtained automatically.

XXXXXXXXXXXX

YYYYYYYYYYYY

Other Network

ENTER.

2 Press a/b to select “Communication Setup”,

then press d or ENTER.

Confirm the current setting.

3 Press a/b to select “Ethernet Setup

• If selecting “desired access point”, go to step 9.

• If selecting “Other Network”, go to the next step.

IP Address : xxx xxx xxx xxx

(Wireless)”, then press d or ENTER.

Netmask

Gateway

: xxx xxx xxx xxx

4 Press a/b to select “Change”, then press

ENTER.

DNS Address : xxx xxx xxx xxx

xxx xxx xxx xxx

MAC Address : xx xx xx xx xx xx

Current Ethernet setup info.

Test

MAC Address : xx xx xx xx xx xx

Access Point : Not Selected

IP Address : Auto Setup

Complete

Netmask

Gateway

DNS

: Auto Setup

• As a result of the test, if the Internet connection

fails, enter the setup values manually.

10 Press a/b to select “Complete”, then press

ENTER.

Change

Initialize

• For initializing the current setting, select “Initialize”,

then press ENTER.

(Continued on the next page)

SETTINGS

7 Press ENTER, then enter the access point

name.

11 Select “Next”, then press ENTER.

Information on MAC addresses

12 For testing after confirming the settings, select

• The access point name is manually entered using

the screen for inputting characters. (See page 49.)

“Test”, then press ENTER.

A MAC address is a unique ID number for

network equipment. A MAC address is necessary

for MAC address filtering on the wireless router/

access point.

• If the test has failed, an error message appears.

Retry to perform the settings after checking that the

connection (page 19) is performed properly.

Enter the access point name.

Confirm your setting.

Access Point:

Before the wireless communication setup is

performed, we recommend writing down the MAC

address of the connected wireless LAN adapter

and keeping it in a safe place. The MAC address

is labeled on the adapter. (The MAC address is

displayed on the “Current Ethernet setup info.”

screen when wireless communication is set (See

step 4 of page 47).)

Access Point: XXXXXXXXXXXX

Security key: XXXXXXXXXXXX

Test

8 Select “Next”, then press ENTER.

9 Press a/b to select your appropriate security

13 Follow steps 5–10 of “When selecting Cable”

on page 46 to complete the network connection

settings.

key, then press ENTER.

• When selecting WPA/WPA2, selectable security

keys are PSK/TKIP and PSK/AES.

MAC address

Select the security key.

OPEN

WEP

WPA-PSK(AES)

WPA-PSK(TKIP)

WPA2-PSK(AES)

WPA2-PSK(TKIP)

10 Press ENTER, then enter the security key code.

• Enter the exact same security key which has been

set in the wireless router.

• The security key code is manually entered using the

screen for inputting characters. (See page 49.)

Enter the security key.

Security key:

SETTINGS

4 Repeat the step 3 to display all of the desired

5 Press D (Yellow) (Complete) to fix the numbers

The operation procedure for

inputting characters manually

characters/numbers in the input field.

which have been input.

Example: The screen for inputting numeric characters

IP Address

Netmask

Gateway

123

NOTE

123

Numeric

Edit

• Numeric characters such as IP address can be entered

on the input screen either by selecting each of the

characters in the “Numeric” mode or using the Number

buttons on the remote control.

6 Repeat step 1 to 5 to finish inputting all the

required characters.

NOTE

• Press j (Del.Char.) to delete a number/

character you have input.

• To change a number/character you have input, press B

(Green) (Left) or C (Blue) (Right) to select the number/

character you want to change, and press j

(Del.Char.). Then, press c/d to select a new number/

character you want to input, and press ENTER.

IP Address

Netmask

Gateway

123

1 Press ENTER at the boxes in which characters

are to be entered, and the input screen will

appear.

Input character list

Numeric

Edit

1ABC (Alphabet/

numeric character)

Num.

ABC

DEF

GHI

JKL

MNO

PQRS

DEF

TUV

WXYZ

Spc.

Num. 1 2 3 4 5 6 7 8 9 0 ABC

A B C a b c

J K L j k l

D E F d e f

Selected by pressing Selected by pressing

a/b c/d

GHI

G H I g h i

JKL

TUV

MNO M N O m n o

PQRS P Q R S p q r s

T U V t u v

WXYZ W X Y Z w x y z

2 Press a/b to select the desired input mode.

Spc.

(space)

3 Press c/d to select a number/character, then

press ENTER.

Numeric

Sign

1 2 3 4 5 6 7 8 9 0

@ . , :

; _ - \

$ % ! ? & # + *

= / | ˜

“ ‘ ˆ `

( ) < >

[ ]{ }

Spc.

@ . , :

; _ - \

= / | ˜

; _ - \

= / | ˜

$ % ! ? $ % ! ?

& # + * & # + *

( ) < > ) <

“ ‘ ˆ `

Spc.

“ ‘ ˆ `

(space)

(

[ ]{ }

[

]

{

}

Edit

Cancel

Left

Right

Complete

Del.Char.

The same operation as the colored buttons and j can be performed by selecting

each of the items and pressing ENTER.

“Del.Char.” stands for deleting characters.

SETTINGS

When you insert or remove a USB memory device,

be sure to turn the main power off and make sure

that “Quick Start” is set to “No” (See page 43).

4 Press a/b to select “Erase” or “Format”, then

Before using the USB memory device

press ENTER.

CAUTION:

Erase: Deletes only BD-VIDEO data written on the

USB memory device such as BD-LIVE data.

• Do not remove the USB memory device or unplug

the AC cord while the operations for “USB Memory

Management” or “Software Update (Manual Update

from USB memory device)” are being performed.

• Do not use a USB extension cable when connecting

a USB memory device to the USB1 or USB2 terminal

on the player.

1 Insert the USB memory device into the USB

terminal on this player.

Format: Be aware that all data including BD-VIDEO

data and software update data will be deleted.

• When the wireless LAN adapter is not inserted

into the USB1 terminal on the rear of the player, it

is recommended that the USB memory device be

connected to the USB1 terminal.

• If you want to delete only the unneeded software

update data after the software is updated, delete

the data on the USB memory device using a PC.

− Using a USB extension cable may prevent the

player from performing correctly.

NOTE

• A USB memory device can be used with either the

USB1 or USB2 terminal. When two USB memory

devices are connected to both terminals at the same

time, in certain situations the USB1 terminal may give

priority to Local Storage and “Erase” and “Format” are

not available for the USB memory device connected to

the USB2 terminal.

NOTE:

• SHARP cannot guarantee that all brands’ USB

memory devices will operate with this player.

• Only USB memory devices formatted with FAT 32/16

are compatible.

Erase

Erases BD-VIDEO data on USB memory.

Format

Erase all contents on USB memory

including protected contents.

When formatting a USB memory device using a PC,

perform the following settings.

Format File System: FAT32

Allocation Unit Size: Default Allocation Size

Rear

5 Press a/b to select “Yes”, then press ENTER.

• A confirmation message is displayed. Check that

the correct USB memory device is displayed, and

then continue.

USB Memory Management

6 Start the process.

The following instructions explain how to delete data

such as the Virtual Package data and the BD-LIVE

data in a USB memory device.

• The screen for the current operation will display.

USB memory device

2 Press a/b to select “Settings”, then press d or

Complete

ENTER.

3 Press a/b to select “USB Memory

Management”, then press d or ENTER.

• The “USB Memory Management” screen is

displayed.

7 Press ENTER.

• “No USB Memory” appears when no USB memory

is inserted.

NOTE

• Data which has been saved to the player’s internal

memory (game score, etc.) will also be deleted.

SETTINGS

Update process

Software Update Settings

1 When this player is turned on, the Internet

connection starts automatically.

In this player, the software version can be updated

using either one of the following methods.

• Auto Update from Network

• “Accessing...” blinks on the screen.

• Manual Update from Network

• Manual Update from USB memory device

• The current version of this unit software and the

latest version of the update file on the network are

displayed when latest version of firmware has been

found.

Auto Update from Network

This function allows you to perform the update by

accessing an Internet connection automatically to

check if there is a new firmware version every time

the player is turned on.

When using this function, it is required to perform

the following settings in advance.

To update this player software with update file,

select “Yes”, and go to step 2.

Latest version of firmware has been found.

Firmware update is available.

Proceed with update?

Setup

1 Press a/b to select “Settings”, then press d or

Current Version :

Latest Version :

xxxxxxxxxx

yyyyyyyyyy

ENTER.

NOTE

If “Yes” will be selected, version update will start.

2 Press a/b to select “Software Update

• Make sure that the LAN cable or the wireless LAN

adapter is connected to this player and make sure that

the wireless router/access point is connected to the

Internet if using the wireless LAN adapter. (See pages

18–19.)

• Make sure to perform the communication settings. (See

pages 46–49.)

Settings”, then press d or ENTER.

Yes

3 Press a/b to select “Auto Update Setting”,

then press d or ENTER.

• If the latest firmware version has been already

updated, nothing is displayed on the screen.

4 Press a/b to select “Yes”, then press ENTER.

• After this, an Internet connection will be made

automatically every time this player is turned on.

2 Press ENTER to start updating.

• It may take time to access and download the update

depending on the Internet connection and other factors.

Downloading latest firmware…

Version : yyyyyyyyyy

CAUTION

• Do not remove the LAN cable or the wireless LAN

adapter or unplug the AC cord while downloading or

updating software.

30%

3 When the software is successfully updated, a

screen is displayed indicating that the update

process is completed.

• If the update has failed, an error message appears.

Retry the update after checking if the broadband

Internet connection (pages 18–19) and

communication settings (pages 46–49) are

performed properly.

4 Press POWER to turn off the player before using

again.

SETTINGS

6 Press ENTER to start updating.

1 Press a/b to select “Settings”, then press d or

Manual Update from Network

ENTER.

Downloading latest firmware…

Version : yyyyyyyyyy

2 Press a/b to select “Software Update

This function allows you to perform the update

operation by accessing an Internet connection

manually to check if there is a new firmware version.

Settings”, then press d or ENTER.

3 Press a/b to select “Manual Update”, then

press d or ENTER.

30%

NOTE

4 Press a/b to select “Network”, then press

• Make sure that the LAN cable or the wireless LAN

adapter is connected to this player and make sure that

the wireless router/access point is connected to the

Internet if using the wireless LAN adapter. (See pages

18–19.)

• Make sure to perform the communication settings. (See

pages 46–49.)

ENTER.

7 When the software is successfully updated, a

screen is displayed indicating that the update

process is completed.

5 During access to the network and checking the

latest version of firmware, “Accessing” blinks.

• The current version of this unit software and the

latest version of the update file on the network are

displayed when latest version of firmware has been

found.

• If the update has failed, an error message appears.

Retry the update after checking if the broadband

Internet connection (pages 18–19) and

communication settings (pages 46–49) are

performed properly.

• It may take time to access and download the update

depending on the Internet connection and other factors.

To update this player software with update file,

select “Yes”, and go to step 6.

8 Press POWER to turn off the player.

CAUTION

Latest version of firmware has been found.

Firmware update is available.

Proceed with update?

• Do not remove the LAN cable or the wireless LAN

adapter or unplug the AC cord while downloading or

updating software.

Manual Update from USB memory

device

Current Version :

Latest Version :

xxxxxxxxxx

yyyyyyyyyy

This function allows software updates by inserting

a USB memory device with the update file into the

USB1 or USB2 terminal on this player.

• When a software update is performed, the software

update data must be written onto the USB memory

device in advance using a PC.

• The USB memory device must be clear of all files

except software update data to allow new software

uploading.

If “Yes” will be selected, version update will start.

Yes

• If the Internet connection has failed, an error

message appears.

Retry the update after checking if the broadband

Internet connection (pages 18–19) and

communication settings (pages 46–49) are

performed properly.

To check for the availability of a software update,

visit www.sharpusa.com/products/support/. If

you have any questions, please call 1-800-BE-

SHARP (800-237-4277).

• When software update data is released, copy the data

onto a USB memory device after downloading it to a

PC.

• For methods such as downloading and copying to a

USB memory device, carefully read the description

shown on the website before performing the operation.

(Continued on the next page)

SETTINGS

1 Insert the USB memory device with the update

file into the USB1 or USB2 terminal on this

player.

6 Enter the 4-digit number using 0–9.

NOTE

• Only USB memory devices formatted with FAT 32/16 are

compatible.

When formatting a USB memory device using a PC,

perform the following settings.

Enter 4-digit password

• It is recommended that the USB memory

device be connected to the USB2 terminal on

the front of the player.

Format File System: FAT32

Allocation Unit Size: Default Allocation Size

• Do not extract the firmware update file to any folders

other than the root directory on the USB memory

device. The firmware update file must be only one file

directly in the root directory.

NOTE

7 Press ENTER to start checking data in the USB

• A USB memory device can be used with either the

USB1 or USB2 terminal. When two USB memory

devices are connected to both terminals at the same

time, in certain situations the USB1 terminal may give

priority to Local Storage and the USB1 terminal cannot

be used for Software Update.

memory device.

Insert USB memory device containing

the software update file.

8 During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Checking

Front

USB memory device

2 Press a/b to select “Settings”, then press d or

• The current version of this unit software and the

version of the update file on the USB memory

device are displayed. To update this player software

with update file, select “Yes”, and press ENTER.

ENTER.

3 Press a/b to select “Software Update

CAUTION

Settings”, then press d or ENTER.

• Do not remove the USB memory device or unplug the

AC cord while the software is being updated.

Software update file is detected in the USB memory device.

Start update?

4 Press a/b to select “Manual Update”, then

press d or ENTER.

5 Press a/b to select “USB Memory”, then press

When you insert or remove a USB memory device,

be sure to turn the main power off and make sure

that “Quick Start” is set to “No” (See page 43).

Current Ver. :

Update Ver. :

xxxxxxxxxx

yyyyyyyyyy

ENTER.

• If you have not yet set the password, go to step 7.

Yes

(Continued on the next page)

SETTINGS

• If the USB memory device is not properly installed

9 Press ENTER to start updating.

• The screen becomes dark for a while until the

update screen can be displayed. Please wait for

the update screen to appear. Do not unplug the AC

cord.

10 When the software is successfully updated, a

screen is displayed indicating that the update

process is completed.

or the correct update file cannot be found on

the USB memory device, an error message is

displayed.

Check the file on the USB memory device, and then

reinsert the USB memory device correctly.

• If the update has failed, check the file in the USB

device and try Software Update again.

11 Press POWER to turn off the player.

• Delete unneeded software update data using a PC

after the software update process is completed.

The picture will temporarily go dark until

the software update display appears.

Wait several minutes and do not unplug the AC cord.

Software update file is not detected in the USB memory device.

Confirm that you have transferred the file

to the USB memory device and retry software update.

Confirm that you have inserted the USB memory device

into the correct device.

12 Remove the USB memory device.

There is more than one software file

in the USB memory device.

Confirm that only the software update file is

in the USB memory device.

Now updating

Do not unplug AC cord.

Update Version

yyyyyyyyyy

30%

About Output of Next Generation Audio Formats

HDMI

DIGITAL OUT

Next generation

audio formats

Maximum number of

channels

PCM

Bitstream

PCM

2ch *²

Bitstream

5.1ch *^1/*³

—

Dolby TrueHD

7.1ch (48kHz/96kHz)

5.1ch (192kHz)

7.1ch *³

5.1ch *³

7.1ch *³

5.1ch *^3/*⁵

7.1ch *³

5.1ch *³

7.1ch *⁴

5.1ch *⁴

7.1ch *⁴

5.1ch *⁴

7.1ch *⁴

—

Dolby Digital PLUS

7.1ch (48kHz)

DTS-HD Master Audio

7.1ch (48kHz/96kHz)

5.1ch (192kHz)

DTS-HD High Resolution Audio

LPCM

7.1ch (48kHz/96kHz)

5.1ch (192kHz)

—

Core only

Down mixed

When “Secondary Audio” is set to “On”, the audio is output as 48kHz.

When “Secondary Audio” is set to “On”, the audio is output as PCM.

When 5.1ch (192kHz), the audio output is downsampled to 96kHz.

When 2ch, the audio is output as 192kHz.

Streaming content

Playing back video on demand streaming content

In this player, you can enjoy a variety of video on

demand streaming content by connecting to the

Internet.

3 Follow the instruction on the screen.

4 To exit the screen;

Playing back YouTube content

This player can play back YouTube video content

streaming through the Internet.

• For more information about YouTube, see the YouTube

website using a PC (http://www.youtube.com).

Netflix: Press EXIT.

VOD content

VUDU: Press HOME.

YouTube: Press EXIT.

Video

NOTE

Instantly Watching Movies from

Netflix

Music

• Some video content may not be played back with this

player.

• The actual functions which can be operated may differ

from the descriptions shown.

Picture

e-Contents

Settings

Please check that the most current software

is loaded on this player by using the software

update function (See pages 51–54) or by visiting

http://www.sharpusa.com/products/support/ to

check for a download of the newest software

version.

Operational buttons for playback control

Item

VOD content

Netflix

• Instantly Watching Movies

Pause the video content. To resume

playing paused content, press

the playback controls.

This function allows you to enjoy Netflix through the

Internet.

Netflix is an online DVD and Blu-ray Disc rental

service, offering rental-by mail and streaming

instantly to Netflix unlimited members.

VUDU

Skip to the previous video content on

the video list.

• Enjoying Movies and Internet Application

YouTube

Skip to the next video content on the

video list.

• Playing back YouTube video content streaming

NOTE

Play back all the video content on the

video list repeatedly.

• To enjoy this function, make a broadband Internet

connection to both your PC and this player (See pages

18–19), and then set communication settings (See

pages 46–49), then perform the following operation.

• To use this function, we recommend setting “Auto

Power Off” to “No” before starting the registration. (See

page 43.)

• Disc playback and this function cannot be used at the

same time.

• As the registration process takes time, we recommend

setting “Auto Power Off” to “No” before starting the

registration. (See page 43.)

• The streaming quality (SD or HD) depends on the

network speed and original bit rate of the title.

• For more information on the Netflix visit http://www.

netflix.com/help or login to your Netflix account and

click “Help” at the top of the page.

Switch the video quality to high

resolution.

Toggle the playback screen between

normal and full screen.

• Before using this function, please read “Network Service

Disclaimer” (page 69).

Determine the point where you want to

play back a video content by pressing

c/d on the progress bar.

Progress bar

• Netflix is only available in the US.

Playing back

NOTE

1 Press a/b to select “e-Contents”, then press

• To turn the playback controls on during full screen

display, press POP-UP MENU.

• To return to the main page screen, press TOP MENU/

TITLE LIST.

The buttons which can be used :

a/b/c/d / ENTER / a / b /

c / d / e / j /

EXIT

d or ENTER.

2 Press a/b to select the desired steaming

content, then press d or ENTER.

• The screen of the streaming content which you

select is displayed.

Playing back streaming content

VUDU Customer Care: When you need to talk live

with someone, contact VUDU Customer Care at

1-888-554-VUDU (8838) 7 a.m. to 8 p.m. Pacific, 7

days a week (except holidays).

NOTE

Enjoying Movies and Internet

Application with VUDU

• Your Internet connection is vital to your VUDU

experience. Please refer to the chart below for minimum

bandwidth requirements:

SD (DVD quality): 480p 1 Mbps to 2 Mbps

HD (HDTV quality): 720p 2.25 Mbps to 4.5 Mbps

HDX (BD quality): 1080p 4.5 Mbps to 9 Mbps

• VUDU Movies is only available in the U.S.

• For more information on VUDU, visit http://www.VUDU.

com.

You can enjoy moves and Internet applications with

VUDU.

VUDU Movies is the leading HD on-demand video

service. VUDU Movies is built into your BD Player

and utilizes your existing Internet connection

to deliver the highest quality on-demand video

available today.

Operational buttons during playback

Buttons

Description

Hold down to go in reverse.

Starts playback.

• Disc playback and this function cannot be used at the

same time.

Hold down to fast forward.

Playback stops.

Example

Troubleshooting - VUDU

Sets pauses and still pictures.

Pressing quickly once takes you to the

start of the chapter currently playing.

Each time you press it, you move back

to the start of the previous chapter.

VUDU cannot be accessed.

• If you are not able to access other network service (e.g.

BD-LIVE) from your device, but are not able to access

VUDU, please contact VUDU Customer Care at 1-888-

554-VUDU (8838).

Pressing quickly once takes you to the

start of the next chapter. Each time you

press it, you move ahead to the start of

the next chapter.

• If you are not able to access any network service (e.g.

BD-LIVE) from your device, please contact your device

manufacture for assistance.

VUDU Movies features:

The activation e-mail was not obtained.

• Check your junk or spam e-mail folders. If you are

unable to find the activation e-mail in the folders,

reconfirm the e-mail address you have entered, and

then try your account settings again.

• True 1080p HD, the only service to offer 1080p quality

video on-demand

• Over 16,000 titles available on-demand

• Over 3,000 titles available in HD, more than are available

anywhere else

• 5.1 surround sound, delivered through state-of-the-art

Dolby Digital Plus

• The latest Hollywood hits available the same day as

DVD

If you encounter any other issues during activation,

refer to the following online resources:

Detailed VUDU Manual: Available at

http://www.VUDU.com/Docs. This introduces you

to all aspects of the revolutionary VUDU service

with easy-to-follow instructions.i

• No subscription fees required

VUDU FAQ: To learn more about VUDU, visit the

Frequently Asked Questions at

http://www.vudu.com/support.

Appendix

Troubleshooting

The following problems do not always suggest a defect or malfunction of this Player.

Refer to the problems and lists of possible solutions below before calling for service.

Power

Problem

Possible causes and solutions

The Player power cannot be turned on.

• Is the power cord firmly plugged into the AC outlet? (Page 20)

• When the power cord is plugged into an AC outlet, press and hold POWER on the Player until “

front panel display. Then, after the POWER indicator is lit, turn on the power. (Page 60)

” appears on the

• Press POWER after the POWER indicator turns on. (Page 21)

The Player power is turned off.

• Is “Auto Power Off” set to “Yes”? When “Auto Power Off” is set to “Yes”, the power will be automatically turned off after

10 continuous minutes of inactivity (no playback). (Page 43)

Basic Operation

Problem

Possible causes and solutions

The remote control does not work.

• Use the remote control within its operating range. (Page 20)

• Replace the batteries. (Page 20)

• Reset the remote control.

− Press and hold 1 (the number button) first and then POWER on the remote control together for more than 5 seconds.

Cannot operate the Player.

• Are you operating the Player within the specified operating temperature range? (Page 64)

Playback

Problem

Possible causes and solutions

The Player cannot play a disc.

• Take out the disc and clean it. (Page 13)

• Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (Page 25)

• Make sure that region code on the disc matches that of this Player. (Page 9)

• Allow any condensation in or near the Player to dry. (Page 13)

• Check that the disc is recorded in the compatible TV system (PAL or NTSC).

• The Player cannot play back video which was not recorded normally. (Page 10)

• Proper playback may be impossible due to the state of the disc recording, a scratched, warped or dirty disc, the state of

the pick-up, or compatibility issues between this Player and the disc being used. (Pages 10, 13)

• When the recorded time of a disc is unusually short, playback may not be possible.

• BD-RE/R discs recorded in a format other than BDMV/BDAV cannot be played back. (Page 9)

The disc is automatically ejected after closing the disc

tray.

• Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (Page 25)

• Take out the disc and clean it. (Page 13)

• Make sure that the disc is playable. (Page 9)

(Continued on the next page)

Troubleshooting

Playback (Continued)

Problem

Possible causes and solutions

Video stops.

• Has the Player been subjected to shock or impact? Are you using it in an unstable location? The Player will stop if it

senses shock or vibration.

The Player makes a snapping sound when starting

playback or loading a disc.

• The player may sometimes make a snapping sound when starting playback if it has not been operated in a while. These

sounds are not malfunctions of the player but are normal operating conditions.

Picture

Problem

Possible causes and solutions

No picture.

• Make sure that the cable is connected correctly. (Page 16)

• Make sure that the connected TV or the AV receiver is set to the correct input. (Pages 16–17)

• Take out the disc and clean it. (Page 13)

• Make sure that region code on the disc matches that of this Player. (Page 9)

• There is no picture from the HDMI output.

− Are the settings performed correctly? Please check the settings. (Page 42)

Screen freezes and operation buttons do not work.

Square noise (mosaic) appears on the screen.

• Turn off the power and turn on the power again.

• If the power is not turned off, perform a reset. (Page 62)

• Is the disc damaged or dirty? Check the condition of the disc. (Page 13)

• Blocks in images may be visible in scenes with rapid movement due to the characteristics of digital image compression

technology.

Audio is not output, or images are not played back

properly.

• The audio may not be output or the images may not be played back properly for some discs in which copyright-

protected contents are recorded.

3D images cannot be output to a TV.

• Is an HDMI cable used?

• Are a 3D compatible TV and 3D glasses used?

• Is a proper connection made between the HDMI OUT terminal of the player and the HDMI input terminal of the 3D

compatible TV?

• Is the 3D setting on this player correct? (Pages 23, 44)

• Is the 3D setting on the TV correct?

• Is a 3D compatible BD disc being played back?

Noise appears on the screen.

• When you watch TV broadcasts with the power of this player turned on, noise may appear on the TV screen. In such

cases, turn off the power to this player or keep this player away from the TV.

Troubleshooting

Sound

Problem

Possible causes and solutions

No sound, or sound is distorted.

• If the volume of the TV or amplifier is set to minimum, turn the volume up.

• There is no sound during still mode, slow motion playback, fast forward and fast reverse. (Page 35)

• DVD audio recorded in DTS is only output from the DIGITAL AUDIO OUT terminal. Connect a DTS compatible digital

amplifier or decoder to the DIGITAL AUDIO OUT OPTICAL terminal on this Player. (Page 17)

• Check that the audio cable is connected correctly. (Page 17)

• Check that the cable plugs are clean.

• Take out the disc and clean it. (Page 13)

• Audio may not be output depending on the audio recording status, such as when audio other than an audio signal or

non-standard audio is recorded for the audio content of the disc. (Page 10)

Audio is not output, or images are not played back

properly.

• The audio may not be output or the images may not be played back properly for some discs in which copyright-

protected contents are recorded.

Network

Problem

Possible causes and solutions

Cannot connect to the Internet.

When the wired Internet connection is made

• Is the LAN cable connected properly?

• Is the wrong cable such as a modular cable used? Connect a LAN cable to the ETHERNET terminal. (Page 18)

• Is the power for the connected equipment, such as a broadband router or modem turned on?

• Is the broadband router and/or modem properly connected?

• Is the proper value(s) set in the network setting? Check “Communication Setup”. (Pages 46–49)

When the wireless Internet connection is made

• Is the wireless LAN adapter connected properly?

• Is the power for the connected equipment, such as a wireless router or access point turned on?

• Is the wireless router or access point properly connected?

• Are there any obstacles, such as physical structures (brick and concrete walls, etc.) and electronics (microwave, etc.)

between the wireless router/access point and the player? As this may cause interference with the wireless signal, make

sure to keep obstacles away.

• Is the proper value(s) set in the network setting? Check “Communication Setup”. (Pages 46–49)

Cannot download BD-LIVE contents.

• Is the LAN cable or the wireless LAN adapter connected properly?

• Is the USB memory device properly connected? Check that the USB memory device is connected to the USB1 or USB2

terminal of this Player.

• Check if the BD disc supports BD-LIVE.

• Check the setting for “BD Internet Access”. (Page 44)

(Continued on the next page)

Troubleshooting

Other

Problem

Possible causes and solutions

The TV operates incorrectly.

• Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this Player.

Use such TVs away from this Player.

The Player heats up during use.

• When using this Player, the console cabinet may heat up depending on the usage environment. This is not a malfunction.

POWER (ON/STANDBY) indicator will remain lit.

• When the AC cord is removed from the outlet, the POWER (ON/STANDBY) indicator will remain lit for a short period. This

is normal and is not a malfunction.

POWER

To Reset this Player

• If this Player receives strong interference from a source such as excessive static electricity, strong external noise, malfunction of power supply, or

voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not accepting an operation may occur.

Press and hold POWER on the Player until “

” appears on the front panel display when the Player does not operate properly even after

the power has been turned off. Then, after the POWER indicator is lit, turn on the power.

• When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take a few moments for the system processing to finish before

the Player is ready for use. During the system processing, the BD/DVD/CD mode indicator on the front panel display of the player will blink. Once the system processing has finished,

the indicator will finish blinking and then light up normally. You can operate the Player when the BD/DVD/CD mode indicator is lit.

• Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must be set again.

• When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the problem, contact the nearest service center approved by

SHARP.

On-screen Error Messages

The following messages appear on the TV screen in case of an error during operation.

Error message

Possible Error