Sanyo NV E7000 User Manual

FILE NO.

Portable DVD Navigation

System

SERVICE MANUAL

NV-E7000

(U.S.A.)

PRODUCTCODENo.

949 005 03

INDEX

SPECIFICATIONS........................................................................................................................................................... 1

ACCESSORIES............................................................................................................................................................... 2

COMPONENT NAMES AND FUNCTIONS..................................................................................................................... 3

DISASSEMBLY ............................................................................................................................................................. 10

ADJUSTMENT PROCEDURES .................................................................................................................................... 13

EXPLANATION OF MICROCOMPUTER...................................................................................................................... 15

TROUBLE SHOOTING ................................................................................................................................................. 25

EXPLANATION OF OPERATION(DVD-ROM MECHANISM)....................................................................................... 29

EXPLANATION OF CIRCUIT........................................................................................................................................ 30

EXPLODED VIEW(DVD-ROM MECHANISM) .............................................................................................................. 33

PARTS LIST(DVD-ROM MECHANISM)........................................................................................................................ 34

EXPLODED VIEW......................................................................................................................................................... 35

PARTS LIST .................................................................................................................................................................. 36

ABOUT UPGRADES ..................................................................................................................................................... 40

CONNECTING A VIDEO DECK/VIDEO CAMERA ....................................................................................................... 41

BLOCK DIAGRAM......................................................................................................................................................... 42

SCHEMATIC DIAGRAM................................................................................................................................................ 45

WIRING DIAGRAM........................................................................................................................................................ 45

REGARDING CLEANING THE PICKUP....................................................................................................................... 90

REFERENCE No. SM590496

ACCESSORIES

Parking brake

connector cable

Self-lock connector

12V cigarette lighter

connector cable

AC/DC adapter

1 cable

2 cables

2 clips

Remote control and

holder

Velcro tape

Tapping screw (M3x8) AAA battery

2 batterys

1 pair

2 screws

Each 1

Map DVD-ROM

RCA cord (when in

AUDIO mode)

RCA cord (when in

VIDEO mode)

Core (Large)

1 disc

1 cable

1 core

GPS Exterior Antenna and

Installation Parts

Core (Small)

Kit for Installation

1 core

COMPONENT NAMES AND FUNCTIONS

DVD VIDEO/CD OPERATION

MAIN UNIT

COMPONENT NAMES AND FUNCTIONS

Liquid crystal display

Brightness sensor

Speaker

Remote control

infrared receiver

Video I/O terminal

Extension terminal

Used when connecting to a TV

image input terminal using the

included RCA cord (when in

VIDEO mode).

Audio I/O and optical digital

audio output terminal

Used when connecting the sound

input terminal of a TV or amp

using the included RCA cord

(when in AUDIO mode).

Brake terminal

Connects to the vehicle’s parking

brake signal line.

Headphone terminal

Used when connecting commercially

available headphones.

DC input 9V terminal

Connects to the included 12V

vehicle battery cigarette lighter

cable / the included

Power supply switch

AC/DC adaptor.

COMPONENT NAMES AND FUNCTIONS

DVD VIDEO/CD OPERATION

REMOTE CONTROL

COMPONENT NAMES AND FUNCTIONS

10-KEY

Flip-top opened

†button

This button displays the playback time

on the top left corner of the screen.

©button

Displays the chapter search and time

search selection screens.

Nbutton

This button displays the 10-key

numerical value input screen.

ßbutton

(only when playing back DVD

video discs)

Every time this button is pressed, the

subtitle language item is switched

from the list of languages recorded in

the disc.

Abutton

(only when playing back DVD

video discs)

Every time this button is pressed, the

angle is switched.

åbutton

(only when playing back DVD

video discs)

Every time this button is pressed, the

voice language item is switched from

the list of languages recorded in the

disc.

Ωbutton

¡For DVD video discs

Every time this button is pressed, the

screen zooms up 1.5, 2 and 4 times

magnification.

¡For JPEG imaging

Toggles between ZOOM ON and OFF.

Vbutton

(CD)

10-key button

Used when inputting numeric values.

The sound output is switched every

time this button is pressed.

Íbutton

#button

Every time this button is pressed, the

repeat mode is switched.

(only when in CD mode)

This button is to select shuffle

playback.

çbutton

Used to correct values when inputting

numbers using the 10-key buttons.

!button

Press this button to display the initial

settings screen and setup key.

COMPONENT NAMES AND FUNCTIONS

OPERATING THE NAVIGATION UNIT

MAIN UNIT

COMPONENT NAMES AND FUNCTIONS

Liquid crystal display

Brightness sensor

Remote control

infrared receiver

Speaker

S-video output terminal

Video I/O terminal

Used when connecting to a TV

image input terminal using the

included RCA cord (when in

VIDEO mode).

Extension terminal

Audio I/O and optical digital

audio output terminal

Used when connecting the sound

input terminal of a TV or amp

using the included RCA cord

(when in AUDIO mode).

Brake terminal

Connects to the vehicle’s parking

brake signal line.

GPS exterior antenna terminal

Connects to the included GPS

exterior antenna.

Headphone terminal

Used when connecting commercially

available headphones.

DC input 9V terminal

Connects to the included 12V vehicle

battery cigarette lighter cable / the

included AC/DC adaptor.

Power supply switch

COMPONENT NAMES AND FUNCTIONS

OPERATING THE NAVIGATION UNIT

REMOTE CONTROL

DISASSEMBLY

How to remove the PCB - ML,MAIN, DVD MECHANISM,MDVC07 and PCB - ML,DVD.

[Refer to figures 1,2,3]

1.Remove 4 screws A which fasten the REAR CABINET ASSY, and the Hook.

Remove FFC,28P which is connected to the PCB - ML,MAIN and PCB - W,LCD.

2.Remove 6 screws B which fasten the PCB - ML,MAIN.

Remove the LEAD WIRES placed on the PCB - ML,DVD side, and FPC.

The PCB - ML,MAIN can be removed.

3.Remove the 3 SPECIAL SCREWS C which fasten the DVD MECHANISM,MDVC07.

Remove FFC,50P which is connected to the DVD MECHANISM,MDVC07 and

PCB - ML,DVD.

The DVD MECHANISM,MDVC07 can be removed.

4.Remove 8 screws D which fasten the PCB- ML,DVD.

Remove the solder of 2 LEAD WIRES placed on the FAN,MOTOR,DC side.

The PCB - ML,DVD can be removed.

How to remove the PCB- W,LCD [Refer to figures 2]

1.Remove the 2 screws E which fasten the BRACKET, LCD.

2.Remove the solder of 2 LEAD WIRES placed on the SPEAKER side.

The PCB- W,LCD can be removed.

How to remove the PCB - W,KEY. [Refer to figures 2,4]

1.Remove the BUTTON, SCROLL.

2.Remove the 2 screws F which fasten the BRACKET, LCD.

3.Remove FFC,6P.

4.Remove the solder of 3 LEAD WIRES placed on the PCB- W,SENSOR side.

5.Remove the 5 screws G which fasten the PCB - W,KEY.

The PCB - W,KEY can be removed.

How to remove the PCB- W,SENSOR.[Refer to figure 4]

1.Remove SPECIAL SCREW H which fasten the PCB- W,SENSOR.

2.Remove the solder of 3 LEAD WIRES placed on the PCB- W,KEY side.

The PCB- W,SENSOR can be removed.

HOOK

REAR CABINET ASSY

Figure1

DISASSEMBLY

PCB-ML,MAIN

LEAD WIRE

CS051

LEAD WIRE

CS982

FPC

FFC,28P

LEAD WIRE

PCB-W,KEY

LEAD WIRES PLACED

ON SPEAKER SIDE

BRACKET,

LCD

BRACKET,

LCD

FFC,6P

PCB-W,LCD

BRACKET,

LCD

BRACKET,

LCD

Figure2

DISASSEMBLY

LEAD WIRES PLACED

ON FAN,MOTOR,DC SIDE

DVD MECHANISM,

MDVC07

FFC,50P

CS601

C796

PCB-ML,DVD

Figure3

PCB-W,

SENSOR

PCB-W,KEY

LEAD WIRE

Figure4

ADJUSTMENT PROCEDURES

1.Adjustment Conditions

Power supply voltage DC

9.0 V.

Input the suitable signal for each adjustment.

It shifts to TEST MODE by pressing in order of [OUT] [OUT][IN] [IN]

[VOLUME-] [VOLUME ] [VOLUME-] [VOLUME ] [RETURN] [POSITION].

[

]

When in TEST MODE, the items can be changed by pressing [

]

of joystick, and the values can be changed by pressing [VOLUME ] or

[VOLUME-]

2.LCD Adjustment

< Adjustment conditions >

In VIDEO MODE, input monochrome10 step signal from VIDEO IN.

Go to TEST MODE and adjust in order of the following.

Adjust each video signal value by default value (COLOR/TINT/ BLACK:

CENTER, DIMMER: MAX, AUTO DIMMER: OFF ).

1 ) ^B- B Adjustment

Observe VG(CS1, pin 8 ) by Synchro - scope.

Adjust [RGB AMP] to become [4.0V P- P

voltage (V^B-B )

0.1V] between Black - Black

2) B - W Adjustment

Observe VG(CS1, pin 8 ) by Synchro - scope.

Adjust [BRIGHT] to become [2.9V ^P- P 0.1V] between Black - White

voltage (VB- W ).

3) Red Adjustment

Observe VR(CS1, pin 7 ) by Synchro - scope.

Adjust [SUB R] to become [2.9V P- P 0.1V] between Black - White

voltage (VB- W ).

4) Blue Adjustment

Observe VB(CS1, pin 6 ) by Synchro - scope.

Adjust [SUB B] to become [2.9V^P- P 0.1V] between Black - White

voltage (VB- W )

5) VCOM Adjustment

Observe VCOM(CS1, pin 9 ) by Synchro- scope.

Adjust [COM AMP] to become wave Form [4.0V P- P

0.1V]

The steps should be like figure 1 by the above - mentioned adjustment.

ADJUSTMENT PROCEDURES

SAME STEPS

BLACK LEVEL

WHITE LEVEL

SIGNAL

V ^{B B}

V B W

V B B

BLACK-WHITE VOLTAGE

BLACK-BLACK VOLTAGE

Figure1

3. FLICKER Adjustment

< Adjustment conditions >

Adjustment shall be done with the combination of a paired LCD module.

Adjustment in TEST MODE.

Display map in NAVI MODE.

Adjust each video signal value by default value.

(BLACK : CENTER. DIMMER : MAX.)

1) FLICKER adjustment

Give a shock to the set, and adjust the [FLICKER] to make the FLICKER

visually optimal.

4. DISPLAY POSITION ADJUSTMENT

< Adjustment conditions >

Display the following screen in NAVI MODE, and adjust the VOLUME on the

reverse side of the LCD module to make the both ends of right and left of the

screen equalize.

Check disc.

Right and left of the both ends of

the white line shall be equalized.

EXPLANATION OF MICROCOMPUTER

IC501 (M30802)1/2

Signal

Function

I/O

SDA_D

DVD_INT

DVD_RST

VOL_O

DARC_DO

DARC_DI

DARC_CLK

DRAC_CE

DRAC_RST

TV_CLK

TV_DATA

TV_LE

TV_LOCK

TV_SD

BYTE

CNVSS

AU_SW1

AU_SW2

RST

XOUT

VSS

XIN

VCC

VSYNC

DARC_INT

RMC

VD_IN

DOOR

KEY_TX

BAT_O

PARK_O

PARK_I

CDCHK

SCL

SDA

VICSTX

VCC

VICSRX

VSS

FM_SD

FM_CE

FM_DO

FM_DI

FM_CLK

VIDEO

NAVI

DVD

RAS

PWR

I/O

PWR

DARC

TV tuner

Hi input

GND

AUDIO change sw

RESET input

Main clock oscillator input

GND

Main clock oscillator output

Power supply4.2 5.5V

Vortical syncro input

DARC

Remote control sensor input

VIDEO input

RS232C output (to NAVI block)

Battery output (to NAVI block)

Parking output (to NAVI block)

Parking input (to NAVI block)

GND

I²C BUS

Power supply4.2 5.5V

GND

FM tuner SD

FM tuner

VIDEO(VIDEO:Hi,Other:Lo)

NAVI(NAVI:Hi,Other:Lo)

DVD(DVD:Hi,Other:Lo)

DRAM

POWER ON/OFF output

GND

AMP ON/OFF output

Power Supply 4.2V 5.5V

POWER

VSS

AMP

VCC

D_MENU

ILM

PWR

GND

NAVI display(Day/Night)change

DARM

EXPLANATION OF MICROCOMPUTER

IC501 (M30802)2/2

Signal

I/O

Function

CAS

LMUTE

VOL_CLK

VOL_DATA

DRAM

LINE OUT Mute

Electronic Volume

DA10R

VCC

DA9

VSS

DA8

PWR

DRAM address

Power supply 4.2V 5.5V

DRAM address

GND

PWR

DRAM address

DA0

NV_BEEP1

PWR

NAVI Beep input

Beep output

Audio mute output

Image mute output

Power supply 4.2V 5.5V

GND

NV_BEEP2

BEEP

SMUTE

DMUTE

VCC

VSS

109

110

I/O

DRAM

113

114

115

116

117

118

119

PARK_SW

DISVICS

TEST

Parking cable plug input

Test mode input

I/O

DRAM data

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

LCD_CLK

LCD_DATA

LCD_CS

DM2

LCD I/F CLOCK

PWR

LCD display mode output

OSD display output

Dimmer output

GND

Model(NV-DK700/750)change

Power supply 4.2V 5.5V

DM3

OSD_SW

DIMOUT

VSS

MODEL_SW

VCC

Temperature input

Battery input

Dimmer sensor input

TEMP

BAT_I

DIMIN

FM_SM

AVSS

VREF

AVCC

SCL_D

PWR

I/O

Analog GND

Battery reference

Analog power supply

EXPLANATION OF MICROCOMPUTER

IC861 (LC24072B)1/2

Signal

Function

I/O

PWR

LVcc

HD8

+3.3V

HD7

HD9

HD6

HD10

I/O

ATAPI data bus

HD5

HD11

HD4

HD12

HD3

HD13

GND

HD2

HD14

HD1

HD15

HD0

LVcc

HDREQ

/HRD

/HWR

/HIORDY

/HDACK

HA1

HA0

HA2

PWR

I/O

ATAPI data bus

PWR

+3.3V

ATAPI DMA transmit request

ATAPI Read strobe

ATAPI Write strobe

ATAPI Wait

ATAPI DMA transmit strobe

ATAPI Address bus

ATAPI Control Register chip select

ATAPI Command Register chip select

+3.3V

Pull-up

/HCS1

/HCS3

GND

PWR

LVcc

FM-ASIC

ASIC-FM

BEACON-ASIC

ASIC-BEACON

GYRO-ASIC

ASIC-GYRO

IRQ_FM

IRQ_BEACON

IRQ_GYRO

VCK

PWR

Clock input(7.15909MHz)

3.579545MHz output

15.7342kHz output

PC card chip select

BOOT Soft load

Serial data output(Voice Gaideance)

L/R clock(Voice Gaideance)

Clock output(Voice Gaideance)

Q2i Wait input

PLLCK

GND

/CS_CARD

/LOAD

LRCK

SCK

/WAIT_Q2

/CS_Q2UGM

Q2i UGM chip select

EXPLANATION OF MICROCOMPUTER

IC861 (LC24072B)2/2

Signal

/CS_Q2REG

ADPCM_SW

GND

/RST_3

CKIO

GND

LVcc

/FCS

/FWE

/DREQ1

/DREQ0

/DACK1

/DACK0

/WAIT

/CS6

I/O

PWR

Function

Q2i inside register chip select

ADPCM switch

Power on reset

System clock input(39.3216MHz)

+3.3V

Flash memory chip select

Flash memory write strobe

DMA request

DMA acknowledge

Wait output

/CS5

/CS4

/CS0

GND

/WE1

/WE0

/RD

SA22

Chip select input

PWR

Write strobe

Read strobe

Address bus

SA5

Address bus

SA1

GND

SD0

PWR

I/O

Data bus

SD5

GND

LVcc

SD6

PWR

+3.3V

Data bus

I/O

100

101

SD13

GND

SD14

PWR

I/O

Data bus

109

110

111

SD22

GND

SD23

PWR

I/O

Data bus

119

120

SD31

GND

PWR

EXPLANATION OF MICROCOMPUTER

IC801 (HD6417706)1/3

Signal

LLVcc

XTAL2

EXTAL2

GND

I/O

PWR

Function

+1.9V

Pull-up

PWR

SD31

I/O

Data bus

SD26

GND

SD25

LVcc

SD24

PWR

I/O

PWR

Data bus

+3.3V

Data bus

I/O

SD20

GND

SD19

LLVcc

SD18

PWR

I/O

PWR

Data bus

+1.9V

Data bus

I/O

SD16

GND

SD15

LVcc

SD14

PWR

I/O

PWR

Data bus

+3.3V

Data bus

I/O

SD6

GND

SD5

LVcc

SD4

PWR

I/O

PWR

Data bus

+3.3V

Data bus

I/O

SD0

SA0

Address bus

SA3

GND

SA4

LVcc

SA5

PWR

Address bus

+3.3V

Address bus

SA13

GND

SA14

LVcc

SA15

PWR

Address bus

+3.3V

Address bus

SA21

GND

SA22

LVcc

SA23

PWR

Address bus

+3.3V

Address bus

SA25

EXPLANATION OF MICROCOMPUTER

IC801 (HD6417706)2/3

I/O

Signal

Function

/BS

/RD

PWR

Read strobe

/WE0

/WE1

/WE2

/WE3

RD/WR

GND

/CS0

LVcc

/CS2

/CS3

D70-D0 select signal

D15-D8 select signal

D23-D16 select signal

D31-D24 select signal

Read/write select signal

Chip select

+3.3V

Chip select 3

Chip select 4

Chip select 5

/CS4

/CS5

Chip select 6

/CS6

/CE2A

GND

PWR

Input/output port D

PTD[7]

LVcc

PWR

+3.3V

Lower32 Mbytes address RAS

/RAS

Input/output port D

Lower32 Mbytes address CAS

PTD[1]

/CAS

PTD[3]

PTD[4]

/IOIS16

/BACK

/BREQ

/WAIT

/DACK0

/DACK1

PTE[2]

PTE[3]

PTF[0]

PTF[1]

PTF[2]

PTF[3]

PTF[4]

PTG[0]

GND

PTG[1]

LLVcc

PTG[2]

PTG[3]

PTF[5]

PTF[6]

/ASEMD0

LLVcc

CAP1

GND

I/O

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

Pull-up

Hardwave wait request

DMA acknowledge 0

DMA acknowledge 1

Input/output port E

Input/output port F

Pull-up

Input/output port F

Pull-up

PWR

Pull-up

+1.9V

Pull-up

I/O

PWR

Pull-up

+1.9V

PLL1 external capacitance pin

GND

CAP2

LLVcc

MD1

PLL2 external capacitance pin

+1.9V

Pull-up

GND

PWR

EXPLANATION OF MICROCOMPUTER

IC801 (HD6417706)3/3

Signal

I/O

Function

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

XTAL

EXTAL

STATUS0

STATUS1

PTE[6]

PTE[7]

GND

CKIO

LVcc

TxD0

SCK0

TxD2

SCPT[3]

SCPT[4]

RxD0

RxD2

IRQ5

I/O

PWR

I/O

Clock oscillator pin

External Clock/crystal oscillator pin

Processor status

ADPCM SW

Systen clock input/output(39.3216MHz)

+3.3V

SCI transmit data0

Pull-up

SC port

SCI receive data0

SCIF receive data2

Pull-up

GND

PWR

/RESETM

LLVcc

IRQ0

IRQ1

IRQ2

IRQ3

IRQ4

GND

NMI

Pull-up

+1.9V

External interrupt request(Q2)

External interrupt request(ATAPI)

External interrupt request(FM)

Pull-up

+3.3V

Pull-up

LVcc

PTG[4]

/DREQ0

/DREQ1

PTG[5]

MD0

MD2

/RESETP

MD3

MD4

MD5

GND

PTJ[0]

PTJ[1]

PTJ[2]

PTJ[3]

LVcc

DMA request

Input port G

Pull-down

Power-on reset request

Pull-up

Pull-down

Pull-up

Pull-down

GND

PWR

+3.3V

GND

EXPLANATION OF MICROCOMPUTER

IC1151 (HD64F3039TEBL18)1/3

Signal

/RST0

/RST1

SPDRVPS

I/O

Function

ATAPI controller/decoder reset

Servo/data processor reset

Spindle motor driver power save

H : Operation mode, L : Standby

H : MUTE ON / L : MUTE OFF LcH

H : MUTE ON / L : MUTE OFF RcH

Normally 5V,boot flash writing 0V

PLL output

MUTEL

MUTER

MD2

LSPEED

FLCNT

AUDIO

Flash memory output

AUDIO Disc play : H

H : Standby,L : Operation mode

GND

VSS

I/O

CPU data bus

VCC

HA0

+5V

CPU address bus

HA1

HA2

HA3

HA4

HA5

HA6

HA7

VSS

GND

LOEJKEY

EXPLANATION OF MICROCOMPUTER

IC1151 (HD64F3039TEB L18)2/3

Signal

INSIDE

I/O

Function

Inside switch input

CLOSESW

CSEL

NAVI

Cover OPEN / CLOSE SW input

IDE cable select input

NAVI,DVD change terminal(Low at NAVI)

SRVDPCS

ATACS

Chip select output

PSC

RF AMP prescaler

MD0

+5V

MD1

GND

PHI

System clock output

CPU hard ware standby terminal +5V

CPU hard reset +5V

STBY

RES

NMI

VSS

GND

EXTAL

XTAL

VCC

Crystal connection terminal

+5V

/RD

READ

/WR

WRITE

/FEW

AVSS

Flash memory output

GND

Focus error signal input

SUM signal input

KEY input terminal for TEST

Test mode input

GND

LVL

TEST0

TEST1

TEST2

TEST3

TEST CNT

EXPLANATION OF MICROCOMPUTER

IC1151 (HD64F3039TEBL18)3/3

Signal

AVCC

I/O

Function

+5V

/ATAINT

/SDINT

TXD

ATAPIcontroller/decoder interrupt input

Servo/decoder processor interrupt input

Serial data trans terminal for debug

Serial data receive terminal for debug

RXD

ENCODER

/PWR DWN1

/PWR DWN2

STBY

ENCODER pulse input

Analog+5V power down control output

Digtal+5V power down control output

PWMdriver MUTEoutput STBY : L

H : DSP output, L : DSP input

DVD-Rdisc : L Other disc : H

Laser RF output DVD : H

DIR

DVDR

RFMVON

TROUBLE SHOOTING

NO POWER

Is the DC 9.0V connected to the

Power supply socket(JK110)?

Then connect the DC 9.0V.

Yes

Is the Power supply switch(SW110)turned ON?

Yes

Then turn the Power supply switch ON.

Then check around Q572.

Confirm 5V at Q572 emitter voltage.

Yes

Then check around IC570,Q570

and Q571.

Confirm 5V at pin 1 of IC570.

Yes

Then check around IC140.

Confirm 14V at D140 cathode side.

Yes

Confirm 5.3V at DZ111 cathode side.

Yes

Then check around IC110.

Confirm 3.6V at DZ110 cathode side.

Yes

Refer to [NO IMAGE] [NO SOUND]

NO IMAGE

Then insert CS402 correctly.

Confirm CS402 is inserted correctly.

Yes

Confirm CS401and CS051 are inserted

correctly.

Then insert CS401and CS051

correctly.

Yes

Confirm the signal at pin 9,13 of IC055.

Then check around IC055.

VIDEO

NAVI

DVD

MODE?

TROUBLE SHOOTING

VIDEO

Yes

Then check around IC053.

Confirm the signal at pin 3 of IC053.

Then check around JK310.

NAVI

Then check around

IC051 and ICO54.

Confirm the signal at pin 1,9,14 of

IC051 and pin 5 of IC054.

NAVI BLOCK

DVD

Yes

Confirm the signal at pin 8,11,16 of

IC051 and pin 3 of IC054.

Then check around IC051 and ICO54.

DVD BLOCK

751,

Then check around IC

IC701,Q754,Q755 and Q756.

NO SOUND

Confirm connecti on of SP is correct.

Yes

Then connect correctly.

Then insert CS051and CS402

correctly.

Confirm CS051and CS402 are

inserted correctly.

Yes

Then check around IC270 and JK270.

Then check around IC270.

Confirm the signal at pin 13,24 of IC270.

Confirm t he signal at pin 5,8 of IC270.

Then check around IC501 and 250.

pin10 pin9 MODE

Confirm pin 9,10 of IC250 is changed

correctly by mode.

Yes

NAVI

VIDE

DVD

VIDEO

NAVI

DVD

MODE?

TROUBLE SHOOTING

VIDEO

Yes

Then check around IC250.

Then check around IC220.

Confirm the signal at pin 2,15 of IC250.

Confirm the signal at pin 2 ,6 of IC220.

Then check around IC260 and JK301.

NAVI

Yes

Then check around IC250.

Confirm the signal at pin 5,14 of IC250.

Then check NAVI BLOCK

(around IC881 and IC882).

DVD

Yes

Confirm the signal at pin 4,11 of IC250.

Then check around IC250.

Then check around IC240.

Confirm the signal at pin 3,5 of IC240.

Then check around IC791, 781 and

701 of DVD BLOCK.

TROUBLE SHOOTING

(DVD- ROM MECHANISM)

Does disc rotate?

Yes

Is laser luminescence

performed?

Check the socket between PCB and MECHANISM

(CS1101 ,CS1301, CS1302 and CS1303)

Check laser drive circuit

Yes

(Q1102 and Q1103)

Check inside SW for PICK UP

Check feed motor circuit (IC1102)

Check 3.3V power supply circuit

(IC1103, IC1104 and Q1101)

Check laser PICK UP

Check RF AMP IC(IC1101)

Check DSP IC(IC1201)

Check SPINDLE MOTOR

Check I/F socket(CS1201)

Check ATAPII/F IC(IC1250)

Check DRAM(IC1251)

Check microcomputer IC(IC1151)

Check DSP IC(IC1201)

Is a map displayed?

Yes

Check DRAM(IC1202)

Check feed motor pulse count circuit(IC1105)

Good product

EXPLANATION OF OPERATION(DVD-ROM MECHANISM)

(NAVI MODE)

[Operation flow from inserting a disc to map display]

1. Turn the power supply ON after inserting adisc

2. Check inside switch of PICK UP

3. Movement of PICK UP (inside switch ON OFF ON)

4. Focus search operation (dual layer DVD)

5. Focus servo ON

6. Start spindle motor rotation

7. TOC read

8. Movement of PICK UP is performed by command from NAVI main part, and then

read the data.

9. Data transmission to NAVI main part

10.Map display

(DVD MODE)

[Operation flow from inserting a disc to DVD video display]

1. Turn the power supply ON after inserting a disc

2. Check inside switch of PICK UP

3. Movement of PICK UP (inside switch ON OFF ON)

4. Laser ON

5. Disc distinction operation (focus search)

6. Disc distinction (single layer DVD or dual layer DVD or CD)

7. Focus search operation

8. Focus servo ON

9. Start spindle motor rotation

10. TOC read

11. Start the DVD video opening display (when auto play is ON)

Since map disc is limited to dual layer DVD disc, focus search is directly

performed as dual layer disc without disc distinction.

In DVD mode, disc distinction is performed.

EXPLANATION OF CIRCUIT

1.NAVI BLOCK

In NAVI MODE, the power supply is supplied to NAVI BLOCK and SERVO PCB.

The NAVI signal from the microcomputer is Hi, and 3.3V and 5V are supplied to

NAVI BLOCK from Q168 and 108.

5V is supplied to SERVO PCB from Q120.

a. CPU(IC801)

IC801 controls ASIC, MEMORY, and GRAPHIC CONTROLER etc. in MAIN CPU.

Taking in the key signal from GPS data and microcomputer are also performed

by CPU.

And CPU detects the state of BEEP output, Parking brake, and Disc cover etc.

b. ASIC(IC861)

ASIC performs output of the control signal at the time of memory access of CPU,

and communicates with DVD drive.

Voice guidance is outputted through IC881(DAC)and IC82(LPF/AMP)by ASIC.

c. MEMORY(IC841,842,843)

IC841 and 842 are used for memory of Map data and calculation of NAVI

microcomputer by SDRAM.

IC843 is used for memory of program software, font data, bit map data, and

back up data of course and initial setting by FLASH.

d. GRAPHIC CONTROLER(IC901)

The data sent from NAVI microcomputer or MEMORY is changed into the data for

display.

IC931 is used as work memory by DRAM.

Graphic data is inputted by 6- bit RGB data synchronizing with DCLK.

IC 941 is inputted to pin 3 and pin14 by PLL.

15.7KHz is compared and DCLK is outputted from pin 4.

e. VIDEO DAC(IC951)

Digital RGB outputted from IC901 is synchronizes with DCLK and changed into

ANALOG, and RGB signal and Composite video signal are outputted.

f. GPS

GPS tuner and MAIN PCB are connected by CS971 and wire.

Pin 8 is power supply for tuner, pin 9 is power supply for antenna, and pin 2 is

power supply for backup.

Pin 6 receives data from NAVI microcomputer, and data is transmitted to NAVI

Microcomputer from pin 7.

From GPS tuner, position/time data is outputted for every seconds, and it is

inputted into pin 145 of NAVI microcomputer.

EXPLANATION OF CIRCUIT

2.VIDEO BLOCK

a. Microcomputer part

Microcomputer manages the whole set, such as power supply management,

change mode, change image/audio , sensor input processing of remote control

or dimmer.

Communication with parking brake input and NAVI BLOCK are also performed.

b. Image part

There are 3 kinds of images displayed by this set. NAVI image, DVD image, and

VIDEO IN image.

Their signals are switched by VIDEO SW (IC053, IC054) and outputted to LCD

interface IC(IC055).

However, since NAVI image is outputted from NAVI BLOCK and DVD image is

outputted from DVD BLOCK by RGB signal, so DVD image and NAVI image are

switched by RGB SW(IC051) , and RGB signal of OSD is switched by RGB SW

(IC052), and then they are outputted to LCD interface IC(IC055).

Gamma correction and bright adjustment of the image signal inputted to LCD

interface are performed, and then the image signal is out putted to LCD side as

RGB signal.

c. Audio part

There are 3 kinds of audio outputted by this set. NAVI GUIDANCE, DVD AUDIO,

and VIDEO IN AUDIO.

NAVI GUIDANCE outputted from NAVI BLOCK is directly inputted to SW(IC250).

The audio outputted from DVD BLOCK is outputted to IC250 via GRAND

ISOLATOR(IC240).

VIDEO IN AUDIO is switched (input/output)by IC260 and AMP is performed at

IC220 and inputted to IC250.

The audio signal outputted from SW is inputted to HEADPHONE SPAMP

(IC270)with electronic volume, and volume is adjusted based on the data from

the microcomputer and outputted to SPEAKER.

3. POWER SUPPLY BLOCK

When the power supply SW is turned ON, 5V will be supplied to microcomputer

by regulator(Q572).

If the power supply signal from microcomputer is “Hi”, the IC for DC - DC(IC110,

140) will operate and 5V, 3V, 3V, 6V, and 14V will be outputted.

Furthermore, 8V will be outputted by regulator( Q101).

These power supplies are supplied to block required in each mode.

4. LCD PCB

LCD PCB has POWER SUPPLY BLOCK for LCD and INVERTER

a. POWER SUPPLY BLOCK for LCD

BLOCK.

By DC- DC IC(IC601), 16/- 16V power supply for LCD is outputted from

5V supplied from MAIN PCB, and supplied to LCD PANEL.

b. INVERTER BLOCK

The high pressure for LCD back light is generated based on 14v supplied

from MAIN PCB. (T431, 432)

Light adjustment is also performed by DIMOUT signal from microcomputer.

EXPLANATION OF CIRCUIT

5. KEY PCB

KEY PCB has various keys and remote control dimmer sensor port.

a. 3V is supplied to IC503 by IC540, key SW is taken in, and assignment of

remote control and the data of main part key are performed.

6. DVD PCB

In DVD MODE, the power supply is supplied to DVD BLOCK and SERVO PCB.

The DVD signal from the microcomputer is Hi, and 3.3V and 5V are supplied to

5V is supplied to SERVO PCB from Q120.

DVD BLOCK from Q611 and Q613.

a. DVD DECODER

IC701 communicates with microcomputer, and playbacks DVD by DVD DECODER.

b. VIDEO DAC

IC751 outputs DVDRGB, Y/C signal and VIDEO signal by DVD VIDEO DAC

c. AUDIO DAC

IC781 outputs DVD audio through BUFFER(IC791) by DVD AUDIO DAC.

(SERVO PCB)

1. RF AMP PART(IC1101)

For the signal read by PICKUP, AMP is performed, and equalizing of playback RF

signal and error signal required for each SERVO are generated.

2. DSP PART(IC1201)

Digital signal processing of the signal from RF AMP is performed, and control

signals of PICK UP, SPINDLE MOTOR, and FEED MOTOR etc are outputted.

Recovery and correction of R

F signal are also performed.

3. ATAPII/F PART(IC1250)

It communicates by ASIC and ATAPII/F in NAVI PCB.

4. MICROCOMPUTER PART(IC1151)

When in NAVI MODE, 5V power supply is supplied, and operation of DVD BLOCK

is controlled .

EXPLODED VIEW(DVD-ROM MECHANISM)

PCB

1RA4U20A36300

MDVC07

PARTS LIST(DVD-ROM MECHANISM)

Ref. No.

PART No.

DESCRIPTION

Q'ty

Ref. No.

IC1153

IC1154

IC1104

IC1104 OR

Q1101

Q1101 OR

Q1151

D1102

PART No.

DESCRIPTION

IC IC-PST597EN

IC TC7WU04FU

TR HAT1025R

TR NTMD6P02R2

TR 2SB1424-R

TR 2SB1424-Q

TR DTA114YU

DIODE DAP202U

DIODE DAN202U

RESONATOR,CERAM,16.000MHZ

RESISTOR,2X1K

RESISTOR,4X47K

IC TC94A03F

IC MSM511666C-50TS-K-DR1

IC TC74VHC245FT-(EL)

IC TC7S66FU

Q'ty

409 424 7709

409 323 8708

405 164 2202

405 173 7106

405 124 2402

405 124 2303

405 083 6206

407 130 4500

407 130 4401

632 815 2773

632 754 3268

632 746 7144

409 504 3607

410 318 2908

410 328 9607

409 320 9401

632 843 4602

632 721 2218

632 754 3268

632 754 3442

632 754 3572

632 746 6970

410 377 9702

410 318 2809

632 833 4513

632 746 5966

DVD-ROM MECHANISM

661 035 1884

ASSY,CHASSIS,DVD,

NO SERVICE PART

BASE

661 030 2503

632 889 9166

412 056 0208

411 166 2607

PLATE,BOTTOM

SPECIAL SCREW,MECHANISM

SCR S-TPG PAN PCS 2X3

SERVO PCB

FFC,45P 30MM

MECHA-SERVO PCB

POLY COVER,200X250

D1105

X1151

661 025 2419

632 864 9211

RA1151

RA1152

RA1154

RA1155

RA1157

IC1201

IC1202

IC1203

IC1204

IC1205

IC1206

X1201

SVR120

RA1202

RA1201

RA1205

RA1203

IC1250

IC1251

X1250

SERVO P.C.B.ASSEMBLY

PCB1

CS1101

661 031 4179

661 022 4669

PCB-ML ASSY,SERVO

SOCKET,45P

SOCKET,50P

CS1101 OR 632 855 3945

CS1201 661 022 4652

CS1201 OR 632 818 9397

IC1101 409 438 7603

IC1101 OR 410 347 0906

IC TC7S66FU

IC TA1293F

IC TA1293F(DRY,C)

IC BA5918FP-Y

IC TC75S51F

DIODE DAP202U

TR 2SA1338-5

RESONATOR,CERAM,22.579MHZ

POTENTIOMETER,4.7K

RESISTOR,2X1K

RESISTOR,2X10K

RESISTOR,2X47K

RESISTOR,4X10K

IC TC9469BF(BS,DRY,CA)

IC MSM514265C-50TS-K-DR1

RESONATOR,CERAM,50.000MHZ

RESISTOR,4X47

IC1102

IC1105

D1101

Q1102

Q1103

Q1152

Q1104

Q1105

RA1162

RA1103

RA1102

IC1151

IC1103

IC1152

409 430 6208

409 353 4404

407 130 4500

405 030 7300

405 131 2501

632 754 3268

632 754 3442

632 754 3572

410 497 4304

409 371 1102

409 375 7001

TR 2SA1338-5

TR DTC114TUA

RESISTOR,2X1K

RESISTOR,2X10K

RESISTOR,2X47K

IC HD64F3039TEBL18/7531AB

IC RN5RG33AA

IC TC7ST08FU

RA1250

RA1251

RA1252

RA1253

RA1256

RA1257

RESISTOR,4X47

NOTES: 1. Part orders must contain Model Number, Part Number and Description.

2. Ordering quantity of screws and resistors must be multiple of 10 pcs.

3. Regular type resistor and capacitor are omitted. Check the schematic diagram for these values.

EXPLODED VIEW

PARTS LIST

PRODUCT SAFETY NOTICE

Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol

in the parts list and the schematic

diagram designate components in whitch safety can be of special significance. When replacing a component identified with

use only the replacement

parts designated, or parts with the same ratings of resistance, wattage or voltage that are designated in the parts list in this manual.

Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before

returning the product to the customer.

Ref. No.

PART No.

DESCRIPTION

Q'ty

Ref. No.

PART No.

DESCRIPTION

SPECIAL SCREW

BUTTON,ENTER

BUTTON,VOL

BUTTON,MENU

BUTTON,MODE

LUG

SPECIAL SCREW

BUTTON,SCROLL

ILLUMINANT

REAR CABINET ASSY

LID ASSY,CD

KNOB,OPEN

SCR S-TPG BIN 2.6X8

KNOB,SLIDE,POWER

RATING LABEL

LABEL,LICENSE,DTS

CAP,SOCKET

Q'ty

412 063 2806

661 049 4192

661 049 4208

661 049 4215

661 049 4222

632 835 5693

412 063 2806

661 043 3900

661 043 3924

661 049 4260

661 059 0429

661 030 2718

411 102 8205

632 887 7720

661 049 7278

661 049 7261

632 814 3146

661 050 3900

661 052 2321

(2)

(1)

INDIVIDUAL

661 049 4161

661 031 5794

661 043 5430

661 042 9859

661 031 2410

INNER CARTON

SHEET

POLY COVER,230X300

PAD,PARTITION

REMOTE CONTROL

SHEET,REMOTE CONTROL

PAD,PLAIN

661 031 2427

661 031 2397

661 035 4847

SHEET

ACCESSORY

661 050 0282

661 049 4123

661 049 4130

661 049 4147

661 042 9859

661 052 8200

INSTRUCTION MANUAL

NOTICE

FIXER

CAUTION LABEL

POLY COVER,230X300

AC ADAPTOR,NVP-AC7E

AC/DC ADAPTER

ASSY,DC-DC CONVERTER

12V CIGARETTE LIGHTER

CONNECTOR CABLE

CHASSIS

661 052 3748

661 030 2442

412 056 9904

661 030 2435

661 030 6839

411 025 9006

661 030 2466

661 043 4341

411 025 4209

STOPPER,LID,CD

SPECIAL SCREW

FIXER

423 009 4006

661 059 0405

FUSE

125V 3A

DC-DC CONVERTER

ASSY,ANTENNA,GPS

GPS EXTERIOR ANTENNA AND

INSTALLATION PARTS

ANTENNA,GPS

COIL SPRING

SCR S-TPG PAN 2X4

BRACKET,SOCKET

BRACKET,LCD

SCR S-TPG BIN 2X6

BRACKET,LCD-CABINET

SCR S-TPG BIN 2X6

SW PCB-CABINET

INSULATOR

SHEET,LCD-PCB

CAUTION LABEL

LABEL,IDENTIFICATION

SPECIAL SCREW,FAN

SCR S-TPG BIN 2X5,SPEAKE

SPECIAL SCREW, 3X8,STAND

WASHER SPR 3,STAND

SPECIAL SCREW

SCR S-TPG BIN 2X6

SHEET

661 031 8849

661 031 4483

632 763 3549

632 785 2292

(1)

PLATE,EARTH

CORD,1500MM

411 025 4209

CORD,PARKING BRAKE CABLE

PARKING BRAKE CONNCTOR CABLE

CONNECTOR,U ELEMENT

SELF-LOCK CONNECTOR

CORD ASSY

(1)

661 033 4436

661 043 7540

661 049 7285

632 717 5827

412 061 7704

411 025 3905

632 866 3545

411 086 3609

412 056 9805

411 025 4209

632 644 5518

632 870 1391

661 025 6486

632 635 1116

(1)

661 040 8755

661 040 8397

(1)

CORD,RCA

WHEN IN AUDIO MODE

CORD,RCA

WHEN IN VIDEO MODE

DVD-ROM,NVP-KS01U

MAP DVD-ROM

REMOCON,NVP-R7000

REMOTE CONTROL AND HOLDER

TARESIVE SHEET

VELCRO TAPE

TARESIVE SHEET

VELCRO TAPE

SCR TPG PAN 3X8

TAPPING SCREW(M3X8)

BATTERY,LR03

AAA BATTERY

POLY COVER,100X100

ASSY,STAND

661 040 8403

661 050 4464

661 050 6451

632 871 1765

632 871 1772

411 073 2400

661 050 6130

(1)

DAMPER

SHIELD PLATE

MECHANISM(68X52)

SPECIAL SCREW

PLATE SPRING

SPECIAL SCREW

LABEL,COLOR,FAN

SPACER

PAD

INSULATOR,LCD

VEIL

412 061 6806

661 032 1092

412 063 2806

632 824 7561

661 034 5333

632 559 9656

661 044 2377

661 037 2810

661 045 8019

632 666 4674

661 052 1218

632 835 5723

632 891 7280

KIT ROR INSTALLATION

CUSHION

POLY COVER,120X175

SCR TPG PAN 3X8

CORD BUSHING

661 052 2338

661 025 6721

411 073 2400

632 807 1807

632 835 5723

661 052 9085

SHELTER

SHEET

SHIELD SHEET,LCD

POLY COVER,100X100

CORE

CHASSIS ELECTRICAL

LCD1

SP1

STAND1

661 031 0348

661 031 3127

661 049 7292

661 029 7465

661 041 3049

661 032 0668

661 034 9447

DISPLAY MODULE

SPEAKER,8 OHM

STAND ASSY

DVD MECHANISM,MDVC07

FAN,MOTOR,DC

FPC,MAIN PCB-DVD PCB

WIRE,50P-64MM

MAIN PCB-DVD PCB

FFC,50P 92MM

CORE(LARGE)

CORE

CORE(SMALL)

661 052 9078

CABINET

661 049 4253

661 049 4246

661 043 2521

661 043 2453

661 059 0412

CABINET ASSY

CABINET

RING

FILTER

RING ASSY

(1)

661 057 1251

661 046 0173

DVD PCB-MECHANISM

WIRE,6P-72MM

NOTES: 1. Part orders must contain Model Number, Part Number and Description.

2. Ordering quantity of screws and resistors must be multiple of 10 pcs.

3. Regular type resistor and capacitor are omitted. Check the schematic diagram for these values.

PARTS LIST(CONTINUED)

Ref. No.

PART No.

DESCRIPTION

Q'ty

Ref. No.

L861

L862

L871

L881

L882

L901

L902

L921

L931

L951

L952

L971

L941

L953

PART No.

DESCRIPTION

INDUCTOR,FERRITE

Q'ty

661 046 0166

661 015 0333

661 059 7701

661 035 1372

661 046 6847

WIRE,28P-92MM

632 883 2132

632 889 9449

661 048 5800

661 012 0138

632 754 3053

632 754 3114

632 754 3268

632 754 3442

632 746 5942

632 746 5966

632 746 6048

632 746 6062

632 746 6970

632 637 5211

632 696 1124

632 889 2105

632 891 4128

661 030 1070

((1))

WIRE,24P-82MM,LCD PCB-LC

WIRE HANESS,9P-60MM

CORE,MAIN PCB-DVD PCB

CORE,FERRITE

MAIN PCB-LCD PCB

CORE,FERRITE

INDUCTOR,FERRITE

INDUCTOR,56UH J

FILTER,EMI

661 025 9586

DVD PCB-MECHANISM

MAIN & GPS P.C.B. ASSEMBLY

PCB1

661 059 4953

661 059 0436

410 448 1604

410 359 8709

409 368 5809

410 415 7509

409 395 5902

409 532 0302

410 369 9505

409 468 2302

409 506 5807

409 375 7001

410 459 3604

410 402 8106

410 441 0000

410 449 3300

410 450 2309

410 451 6306

410 433 7000

410 500 9401

410 509 5008

410 444 8805

409 323 8708

409 301 5101

409 391 5005

409 228 9206

409 429 7100

409 511 1207

409 435 9501

409 330 2508

410 403 9706

410 371 6004

409 459 9303

661 040 2074

632 807 3719

661 032 5212

632 870 6884

632 789 6951

661 032 8084

632 892 1157

661 000 4773

632 806 8784

405 183 8704

405 183 9008

405 102 5609

405 111 2408

405 014 4509

407 216 8101

407 008 5707

407 056 5506

632 883 2132

PCB-ML ASSY,MAIN & GPS

PCB-ML ASSY,MAIN

IC HD6417706F133

IC SN74AHC1G08HDCK-R

IC TC7SH08FU

IC SN74AHC1G00HDCKR

IC TC7SH00FU

IC R3112Q271A

IC SN74AHC2G14HDC-TR

IC TC7WH14FU

IC NC7ST08P5

IC TC7ST08FU

IC V54C365164VCT-7

IC HY57V641620HGT-P

IC K4S641632F-TC75

IC MT48LC4M16A2TG-75

IC M12L64164A-7T

IC NT5SV4M16DT-7K

IC HY57V641620HGT-K

IC TC58FVT321FT-10/7560AA

IC TC58FVM5T2ATG65/7560AA

IC LC24072B-WC8-E

IC TC7WU04FU

(1)

IC801

IC802

IC834

((1))

NF951

RA817

RA819

RA820

RA870

RA868

RA869

RA823

RA825

RA881

RA901

RA872

RA801

RA802

RA803

RA804

RA805

RA806

RA807

RA808

RA809

RA810

RA811

RA812

RA813

RA814

RA815

RA816

RA818

RA861

RA862

RA863

RA864

RA865

RA866

RA871

RA902

RA903

RA904

RA905

RA906

RA907

RA908

RA909

RA954

RA867

RA951

RA821

RA822

RA824

RA910

RA931

RA932

RA933

RA934

RA981

RA991

RA992

RA993

RA994

RA995

RA996

JK110

JK270

JK301

JK310

JK560

RESISTOR,2X33

RESISTOR,2X100

RESISTOR,2X1K

RESISTOR,2X10K

RESISTOR,4X33

RESISTOR,4X47

RESISTOR,4X100

RESISTOR,4X150

RESISTOR,4X10K

SOCKET, DC JACK

JACK,HEAD PHONE

JACK,LINE IN/OUT

JACK,VIDEO IN/OUT

JACK,PARK

IC802 OR

IC834 OR

IC831

IC831 OR

IC832

IC833

IC833 OR

IC835

IC835 OR

IC841

IC842

IC841 OR

IC842 OR

IC841 OR

IC842 OR

IC841 OR

IC842 OR

IC841 OR

IC842 OR

IC841 OR

IC842 OR

IC841 OR

IC842 OR

IC843

IC843 OR

IC861

IC871

IC872

IC881

IC882

IC901

IC921

IC923

IC923 OR

IC931

IC941

IC951

X801

X871

X921

CS971

CS981

IC TC7W04FU

IC UPD6379ALGR

IC NJM2100M

IC HD64412F

IC XC2151A510M

IC NC7S04P5

IC TC7SH04FU

IC MSM5118165F-60TS-K

IC CD74HC4046AM-96

IC CXA2106R

RESONATOR,XTAL,14.7456MHZ

RESONATOR,XTAL,7.15909MHZ

RESONATOR,XTAL,32.000MHZ

PLUG,9P

SOCKET,50P

SOCKET,34P

SOCKET,GPS

RETAINER,SOCKET,GPS

BATTERY

TR RT1N141M

TR RT1N441M

TR 2SD1819A-R

TR 2SD601A-R

TR 2SC2412K-R

DIODE MA721WK

DIODE MA152K

ZENER DIODE RD4.3MB1

INDUCTOR,FERRITE

CS991

CS982

Z971

Q801

Q802

Q804

Q805

Q806

Q807

Q803

Q951

Q952

Q971

Q971 OR

D971

D972

DZ941

L801

L802

L841

L842

NOTES: 1. Part orders must contain Model Number, Part Number and Description.

2. Ordering quantity of screws and resistors must be multiple of 10 pcs.

3. Regular type resistor and capacitor are omitted. Check the schematic diagram for these values.

PARTS LIST(CONTINUED)

Ref. No.

PART No.

DESCRIPTION

Q'ty

Ref. No.

D160

D270

TH501

TH570

L110

L111

L112

L141

L113

L114

L140

L142

L160

L161

L163

L260

L261

PART No.

DESCRIPTION

DIODE EP10QY03

Q'ty

SW110

CS051

X051

632 815 1585

632 889 2068

632 659 7989

661 015 6786

409 494 4905

409 476 7009

409 508 4808

409 535 2709

409 520 7108

409 531 2109

409 182 1209

409 262 4205

409 485 0107

409 537 8709

410 359 8709

409 368 5809

409 482 0407

410 496 9607

410 350 7800

409 531 9207

409 530 4401

409 506 5906

405 182 5605

405 165 8401

405 092 4101

405 022 6304

405 124 2402

405 153 4903

405 030 7102

405 144 1508

405 083 5209

405 102 5609

405 183 8605

405 167 4104

405 158 5509

405 140 9409

405 161 4506

405 145 0104

407 057 3709

407 055 7402

407 207 7700

407 207 9209

407 058 0400

407 057 1101

407 058 0509

407 228 3507

407 224 5109

407 108 4006

407 149 0807

407 217 4904

SWITCH,SLIDE,POWER

SOCKET,28P

((1))

407 217 4904

407 211 3101

408 049 2205

661 010 5951

632 868 7732

632 869 5652

632 889 3317

661 000 7187

632 883 2132

661 001 2518

632 754 3114

632 754 3268

632 754 3411

632 754 3442

632 754 3619

632 746 6048

632 746 6178

632 746 7229

402 083 4300

402 083 4508

661 036 0008

661 056 1368

661 056 1375

661 056 1382

632 848 0975

661 059 4946

661 052 1980

632 870 8178

661 058 5081

((1))

((2))

(1)

DIODE EP10QY03

RESONATOR,XTAL3.579545MHZ

OSC,XTAL,12.000MHZ

IC MM1234XFBE

IC BA7652AF

THERMISTOR SC20-3U104K

TH NCP18XH103F03RB

CHOKE COIL

X501

IC051

IC052

IC053

IC054

IC055

IC110

IC140

IC160

IC201

IC220

IC240

IC250

IC260

IC270

IC301

IC301 OR

IC310

IC501

IC530

IC540

IC550

IC570

Q572

Q109

Q121

Q141

Q161

Q261

Q051

Q101

Q108

Q160

Q120

Q140

Q201

Q260

Q570

Q202

Q203

Q270

Q310

Q271

Q571

Q301

Q110

Q111

Q110 OR

Q111 OR

Q142

Q560

Q112

DZ571

DZ052

DZ110

DZ111

DZ260

DZ570

DZ101

D051

D053

D055

D056

D115

D201

D202

D310

D110

D111

D112

D203

D204

D301

D311

D560

D113

D114

D140

INDUCTOR,FERRITE

INDUCTOR

22UH M

IC BA7652AF

IC RB5P0060M

INDUCTOR 8.2UH M

INDUCTOR,FERRITE

RESISTOR,2X100

RESISTOR,2X1K

RESISTOR,2X6.8K

RESISTOR,2X10K

RESISTOR,2X100K

RESISTOR,4X100

RESISTOR,4X1K

IC LTC3707EGN

IC XC9101D09AK

IC XC6203E192F

IC NJM4565M-B

IC BA3121F

IC CD4052BC

IC BH7884EFV

IC SN74AHC1G08HDCK-R

IC TC7SH08FU

L310

L501

L530

L540

L541

L550

IC MM1228XF

IC M30802FCGP/7548AA

IC MSM5117805D-60TS-K

IC M35075-050FP

IC BR24C02FV-W

IC XC61CC4202M

TR 2SC4132

TR RT1N144M

TR 2SC4081-R

TR 2SD1621-T

TR 2SB1424-R

TR 2SA2016

TR 2SB1203-T

BR503

BR508

BR514

BR250

BR270

BR509

BR251

BR501

BR517

BR541

BR051

R122

R123

R114

R150

RESISTOR,4X100K

MT-GLAZE 0.024 JA 1/2W

MT-GLAZE 0.047 JA 1/2W

SHIELD,SHEET

SHIELD SHEET

SHEET

TR DTA143XUA

TR DTC343TK

PCB-W ASSY,GPS

GPS RECEIVING UNIT

SOCKET,9P(PLUG)

BRACKET

TR DTC343TK

((1))

TR 2SD1819A-R

TR RT1P136C

TR FY5ACJ-03F

TR FDS8936A

LCD P.C.B. ASSEMBLY

PCB2

CS401

CS402

CS402 OR

CS431

CS404

IC441

Q431

Q432

Q433

Q434

Q441

D441

D442

T431

T432

L431

L432

L441

L461

661 051 2872

PCB-W ASSY,LCD

SOCKET,24P

SOCKET,28P

PLUG,2P

SOCKET,6P

IC XC6367B103M

TR 2SC4132

TR 2SB1424-R

632 798 5822

632 891 4449

632 860 8300

632 775 2707

661 044 6931

409 509 2001

405 182 5605

405 124 2402

405 165 8609

405 182 5605

407 218 1803

407 149 0807

661 015 6076

661 000 7187

661 009 4651

661 009 2916

632 755 3571

TR FDS8936A

TR IRF7201

TR RT1P141C

TR 2SA1586-GR

ZENER DIODE RD6.2MB2

ZENER DIODE RD3.3MB2

ZENER DIODE PTZ3.9B

ZENER DIODE PTZ6.2B

ZENER DIODE RD9.1MB1

ZENER DIODE RD5.6MB2

ZENER DIODE RD9.1MB2

DIODE UMN1N

TR RT1N144C

TR 2SC4132

DIODE RB706D-40

DIODE 1SS355

INVERTER TRANSFORMER

INDUCTOR,FERRITE

INDUCTOR 100UH K

INDUCTOR 100UH M

CORE

DIODE UMN1N

DIODE MC2848-T11

DIODE DSM10C

DIODE 1SS355

DIODE EP10QY03

KEY P.C.B. ASSEMBLY

PCB3

IC541

IC503

IC540

Q550

Q560

Q561

X501

661 059 0443

PCB-W ASSY,KEY

IC TC7WT241FU

IC M34282M2-338GP

IC S-812C33AUA-C2N-T2

TR 2SD1819A-R

RESONATOR,CERAM,4.000MHZ

409 410 7805

410 483 7104

410 464 4009

405 102 5609

661 046 5345

NOTES: 1. Part orders must contain Model Number, Part Number and Description.

2. Ordering quantity of screws and resistors must be multiple of 10 pcs.

3. Regular type resistor and capacitor are omitted. Check the schematic diagram for these values.

PARTS LIST(CONTINUED)

Ref. No.

PART No.

DESCRIPTION

Q'ty

Ref. No.

L751

PART No.

DESCRIPTION

INDUCTOR,FERRITE

Q'ty

S540

632 868 0221

632 668 1442

407 231 2306

661 044 6931

407 213 2102

661 033 7475

661 045 8026

661 053 6472

SWITCH,TACT

632 883 2132

632 559 5733

661 012 0138

661 012 0145

405 145 0104

405 165 8401

405 124 2402

405 118 7901

407 092 9506

407 056 5506

407 227 4802

632 754 3053

661 011 7077

632 754 3114

632 754 3237

632 754 3367

632 754 3442

632 746 5942

632 746 5966

632 746 5980

632 746 6062

661 012 9674

632 746 6901

632 746 7229

661 052 1171

661 036 0978

661 055 8573

661 056 1351

S511

S512

S513

S515

S516

S517

S519

S521

S528

S531

D501

D502

D503

D504

D505

D506

D507

D508

D509

D510

D511

D513

D514

D515

CS501

REM501

SWITCH,TACT

LED CL-191B1-X

SOCKET,6P

L781

L782

L791

L611

L612

L752

L753

L754

NF751

NF641

Q751

Q752

Q753

Q754

Q755

Q756

Q612

INDUCTOR,FERRITE

INDUCTOR 8.2UH K

FILTER,EMI

TR 2SA1586-GR

TR RT1N144M

TR 2SB1424-R

Q614

Q671

Q701

Q613

Q611

D611

TR 2SB709A-R

DIODE SB07-03C

ZENER DIODE RD4.3MB1

ZENER DIODE RSA6.1EN

RESISTOR,2X33

RESISTOR,2X75

RESISTOR,2X100

RESISTOR,2X560

RESISTOR,2X4.7K

RESISTOR,2X10K

RESISTOR,4X33

RESISTOR,4X47

RESISTOR,4X56

RESISTOR,4X150

RESISTOR,4X300

RESISTOR,4X4.7K

RESISTOR,4X100K

SHIELD SHEET

DZ601

DZ641

RA723

RA730

RA734

RA758

RA705

RA707

RA641

RA642

RA791

RA735

RA651

RA701

RA702

RA703

RA704

RA708

RA709

RA710

RA711

RA712

RA713

RA714

RA715

RA716

RA717

RA718

RA719

RA720

RA721

RA722

RA725

RA726

RA727

RA728

RA729

RA753

RA755

RA754

RA751

RA752

RA706

RA792

SENSOR RPM6938-V4

SPACER

SHEET

CUSHION

SENSOR P.C.B. ASSEMBLY

PCB4

PH601

661 051 2889

407 232 1506

PCB-W ASSY,SENSOR

PHOTO DIODE RPM-075PT

DVD P.C.B. ASSEMBLY

PCB5

IC701

IC731

IC731 OR

IC733

IC734

IC734 OR

IC735

IC737

IC741

661 059 0450

PCB-ML ASSY,DVD

IC ES4408FD

IC S-24C02BFJ

IC HN58X2402FPI-Z

IC W29C040T-90/7549AA

IC SN74AHC1G08HDCK-R

IC TC7SH08FU

409 513 8709

409 487 9108

410 382 0107

410 496 9706

410 359 8709

409 368 5809

409 323 8708

410 416 3401

409 525 3204

410 390 2209

409 521 5707

409 507 1600

409 480 3806

409 435 9501

409 330 2508

409 039 7804

409 533 1407

409 533 1506

661 036 8356

632 801 7270

661 015 1255

632 761 9833

632 869 1371

632 789 6951

632 775 2844

632 883 2132

IC TC7WU04FU

IC SN74AHC174PW-R

IC A43L0616AV-6

IC LC3816161ET-70-MPB

IC T431616A-7S

IC CS4955-CQ

IC PCM1720E

IC NC7S04P5

IC742

IC741 OR

IC742 OR

IC741 OR

IC742 OR

IC751

IC781

IC782

IC782 OR

IC791

IC601

IC671

IC672

IC673

X731

CS601

CS631

CS641

CS651

CS661

SW661

L701

IC TC7SH04FU

IC NJM4558M

IC NC7WB3306K8

IC FST16210MTD

RESONATOR,XTAL,27.000MHZ

SOCKET,34P

SOCKET,4P

SOCKET

SOCKET,50P

SWITCH,MICRO

INDUCTOR,FERRITE

SHIELD,SHEET

SHIELD

SHIELD SHEET

L702

L734

NOTES: 1. Part orders must contain Model Number, Part Number and Description.

2. Ordering quantity of screws and resistors must be multiple of 10 pcs.

3. Regular type resistor and capacitor are omitted. Check the schematic diagram for these values.

ABOUT UPGRADES

CONNECTING A VIDEO DECK/VIDEO CAMERA

Use the AUDIO and VIDEO RCA cords included with this unit to enable the playback of

images from your video deck or video camera.

Connect your video deck/video camera to the unit.

* Prior to connecting, cut off the power supply to the video deck/video camera.

Turn the power supply ON for the video deck/video camera

”VIDEO” will be displayed on the screen for roughly 10 seconds.

*If the unit is in another mode, press the button to return the unit to the VIDEO mode.

Start playback on the video deck/video camera.

* Refer to the video deck/video camera instruction manual for their respective operation

method.

When connecting the unit to the video deck/video camera, press the MODE button to

Hint

switch modes in the following order:

“VIDEO”

“NAVI”

“DVD”

Video deck/video camera operation is enabled only after having put the unit in VIDEO

mode.

BLOCK DIAGRAM

VIDEO SW

(IC310)

JK310

RGB SW

IC051

VIDEO BLOCK

DVD BLOCK

NAVI BLOCK

VIDEO IN

(VIDEO)

VIDEO

IC053

VIDEO SW

(IC054)

NAVI COMPOSITE

DRAM

(IC530)

DVD COMPOSITE

LCD I/F

(IC055)

RGB SW

(IC052)

R/G/B

OSD

I²C

(IC540)

HSYNC/VSYNC

TV MICOM

(IC501)

E²PROM

(IC550)

REM IN

DIM IN

DIM OUT

CLK/DATA

HEAD PHONE

SELECT SW

IC541

JK270

AMP

(Q004)

REM501

VOLUME,

HEAD PHONE AMP,

PWR AMP

AUDIO SW

(IC250)

AMP

(IC220)

VIDEO IN

(AUDIO)

IC503

KEY SW

(IC270)

NAVI

GUIDE

JK301

CS641

IMAGE SIGNAL

AUDIO SIGNAL

AMP

(IC201)

DVD

AUDIO

NAVI BLOCK

DVD

BLOCK

CARD I/F

(CS991)

SDRAM

(IC841,842)

GPS TUNER

BUS SW

(IC671,

672,673)

FLASH

(IC843)

DVD-ROM DRIVE

(CS981)

CPU

(IC801)

CONTROL

ADDRESS

DATA

ASIC

(IC861)

BEACON / GYRO

GUIDE DAC

(IC881)

VIDEO

DAC

(IC951)

GRAPHIC

CONTROLLER

(IC901)

DRAM

(IC931)

RGB / COMPOSITE

LPF/AMP

(IC882)

NV_HSYNC

NAVI GUIDE

PLL

(IC941)

PLL CK

BLOCK DIAGRAM

LCD PCB BLOCK

HSYNC/VSYNC

R/G/B

+5.3V

DC-DC

(+16V,-16V)

(IC441)

LCD

+14V

BACKLIGHT

INVERTER

DIM OUT

DIM IN

DIMMER

SENSOR

REM IN

REMCON

SENSOR

SP+

SP-

POWER SUPPLY BLOCK

MICROCOMPUTER

BLOCK

(MICOM/DRAM)

REG. (+5V)

(Q572)

+5.3V

+3.6V

DC-DC

(IC110)

DC IN

(JK110)

NAVI BLOCK

DVD BLOCK

REG. (+1.9V)

(IC160)

BACKLIGHT

INVERTER

DC-DC (+14V)

(IC140)

REG. (+8V)

(Q101)

TV TUNER

FM TUNER

BLOCK DIAGRAM

SCHEMATIC DIAGRAM

DVD BLOCK

/DVD_RST

DVD_R,DVD_G

DVD_B,DVD_CV

GPS

IC751

VIDEO

SCL,SDA

ENCODER

IC701

DACL,DACR,SGND,P_MUTE

IC781

IC731

EEPROM

DVD DECODER

DVD DAC

Control

Address

Data

DVD_INT

IC741,742

SDRAM

MAIN 4/7 CS971

IC733

FLASH

BUS SW

EXTENSION TERMINAL

AUDIO

BUFFER

(Q204)

EXT_L/R

( AUDIO SW OUTPUT )

GYRO

( NAVI ASIC )

WIRING DIAGRAM

BEACON

GPS P.C.B.

DVD-ROM MECHANISM

DISC

SPINDLE

MOTOR

O.P.U.

SERVO PCB

SLED MOTOR

SPINDLE

MOTOR

DRIVER

AN8472SA

ENCODER

IC1101

TA1293F

PRE-AMPLIFIER

IC1201

TC94A03F

CD/DVD-DPS

DVD DATA

PROCESSOR

IC1202

1M-DRAM

IC1151

HD64F3039

MICRO

PHOTO INTERRUPTER

SPI-236-17

PROCESSOR

IC1102

BA5918F

ACTUATOR/

SLED MOTOR

DRIVER

IC1250

TC9469BF

DECODER

IC1251

4M-DRAM

NAVI PCB

WIRING DIAGRAM

MAIN P.C.B.

DVD P.C.B. 2

LCD P.C.B. CS402

DVD P.C.B. CS601

DVD P.C.B. 1

WIRING DIAGRAM

MAIN P.C.B.

VIDEO,I/O

TERMINAL

AUDIO I/O

AND OPTICAL

DIGITAL AND

IO OUTPUT

TERMINAL

BRAKE

TERMINAL

HEADPHONE

TERMINAL

SW110

POWER

SUPPLY

SWITCH

DC INPUT

9V TERMINAL

GPS P.C.B. CN999

SCHEMATIC DIAGRAM

GND ISOLATOR

MAIN 1/7

IMAGE SIGNAL

AUDIO SIGNAL

BA3121F

5V SW

HEADPHONE

MUTE

MC2848

HEADPHONE

SP AMP

RT1N144M

CD4052BC

3.3V SW

1.9V REG

LINE IN

AMP

RT1N144M

LINE IN/OUT SW

RT1N144M

LINE IN

AMP

DRIVER

LINE OUT

AMP

OPEN

MC2848

LINE OUT

MUTE

CD4052BC

MUTE

DRIVER

LINE OUT

AMP

LINE OUT

MUTE

AND

BUFFER

SN74AHC1G

08HDCK

RT1P136C

FY5ACJ-03F

5.3V DRIVER

3.6V DRIVER

DRIVER

EGN

DC-DC CONVERTER

POWER SW

XC9101D09AK

MC2848

IN/OUT SEL.SW

RT1N144M

2SA1586

POWER SW

SCHEMATIC DIAGRAM

INVERTER

SN74AHC2G14HDC

MAIN 2/7

BUFFER

NC7ST08P5

RT1N141M

RESET

SN74AHC1G08HDCK-R

AND BUFFER

BUFFER

SN74AHC1G08HDCK

BUFFER

SN74AHC1G00HDCKR

RT1N141M

HD6417706F133

NAVI

MICRO COMPUTER

RT1N141M

RT1N441M

RT1N141M

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

MAIN 3/7

音声信

号

uPD6379ALGR

AUDIO GAID DAC

L.P.F.

LC24072B-WC8-E

ASIC

INVERTER

TC7WU04FU

SCHEMATIC DIAGRAM

MAIN 4/7

REG.

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

2SD601A

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

MAIN 5/7

SD-RAM

FLASHMEMORY

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

OPEN

MAIN 6/7

OPEN

120K

82K

OPEN

MC2848

OPEN

MC2848

5V SW

8V REG

OPEN

RT1N144M

OPEN

M30802FCGP/7548AA

5V REG

2SC4132

MAIN MICRO COMPUTER

RESET SW

OPEN

RESET SW

RD6.2M

PARKING

SCHEMATIC DIAGRAM

MAIN 7/7

IMAGE SIGNAL

NC7S04P5

IMAGE DAC

REG.

VIDEO

BUFFER

NAVI IMAGE IC

CD74HC4046AM-96

PLL

XC2151A510M

CLOCK

GENERATOR

MSM5118165F-60TS-K

D-RAM

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

LCD

CS501

2SC4132

DC-DC

CONVERTER

INVERTER

DRIVER

14V

DRIVER

DIMMER

DRIVER

LCD

INVERTER

DRIVER

2SC4132

RT1N144C

DIMMER

DRIVER

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

WIRING DIAGRAM

LCD P.C.B.

SENSOR P.C.B.

KEY P.C.B.

BROWN

BLACK

RED

BLACK

RED

BROWN

VOL.

SENSOR P.C.B.

JOYSTICK

VIEW

ENTER

OUT

REMCOM

SCHEMATIC DIAGRAM

KEY

TO LCD CS404

SENSOR

LIGHT

REGULATOR 3.3V

SENSOR

SEL. SW

D501-511,513-515

CL-191B1

ENTER

JOYSTICK

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

DVD 1/2

SERVO 3/3 CS1201

CS651

2SB709A

+5V SW

+3.6V SW

RT1N144M

NAVI/DVD

3.6V

CHANGE

RSA6.1EN

MAIN 4/7 CS981

SCHEMATIC DIAGRAM

IMAGE SIGNAL

AUDIO SIGNAL

DVD 2/2

W29C040T-90

RT1N144M

DVD FLASH

INVERTER

RESET

BUFFER

S-24C02BFJ

OPEN

SN74AHC1G08HDCK

DVD EEPROM

DVD DAC MODE

CONTROL

OPEN

VIDEO

ENCODER

FILTER

OPEN

DVD DECODER

BUFFER

2SA1586

BUFFER

2SA1586

NC7S04P5

BUFFER

2SA1586

BUFFER

2SA1586

OPEN

BUFFER

OPEN

2SA1586

BUFFER

2SA1586

DVD SDRAM

OPEN

CLOCK

INVERTER

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

TC7WU04FU

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

WIRING DIAGRAM

DVD P.C.B.

MAIN P.C.B. 1

MAIN P.C.B. CS981

MAIN P.C.B. 2

SERVO P.C.B. CS1201

MAIN P.C.B. 3

MAIN P.C.B. CS982

WIRING DIAGRAM

DVD P.C.B.

WIRING DIAGRAM

DVD P.C.B. CS651

SERVO P.C.B.

DVD MECHANISM

WIRING DIAGRAM

SERVO P.C.B.

SCHEMATIC DIAGRAM

SERVO 1/3

HD64F3039TEBL18

POWER

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

SERVO 2/3

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

SERVO 3/3

NOTES

1. RESISTOR VALUES IN OHMS.(k=1000)

RESISTOR ARE 1/6W,1/8W,1/10W&1/16W 5%

UNLESS MARKED OTHERWISE.

2. CAPACITOR VALUES IN MICRO FARADS. (p=uuF)

3. MODIFICATION MAY BE DONE WITHOUT ANY NOTICE.

4. THE MENTIONED FIGURE OF UNIT ON THE IC ARE VOLTS.

SCHEMATIC DIAGRAM

SPINDLE MOTOR

REGARDING CLEANING THE PICKUP

For CANADA only

For U.S.A. only

Sanyo Canada Inc.

1-300 Applewood Cres.

Concord, Ont. L4K 5C7

For parts or service contact

Sanyo Fisher Service Company

21605 Plummer Street

Chatsworth, CA 91311

Nov./'03/45 Printed in Japan.

Vinotemp VT BD User Manual
Transition Networks SSDTF1015 100 User Manual
Tokina MONOFOCAL LENS TC2814NI User Manual
Sunbeam 4816 8 User Manual
Sony XR CA660X User Manual
Sony XM ZR604 User Manual
Sony DSCQX30B User Manual
Samsung SMX K44LN User Manual
Samsung HDR CX7E User Manual
Samsung Camcorder 2 User Manual