Before attempting to operate this product, please read the
instructions carefully.
SALES NETWORK
•
•
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
STH-1000PO/STB-30PF
STH270PW/STB-496PPV
STB-350PPM/STB-330PPM
STB-340PCM
VAN 08. 05
Product Category
Product Category
STH-1000PO
STB-30PF
: “Outdoor Housing” for the Samsung Speed Dome Camera.
: It is the “Ceiling Flange” for Samsung Speed Dome cameras.
STB-350PPM
: It is the “Parapet mount” used to install the indoor/outdoor housing for Samsung Speed Dome
cameras.
STB-270PWV
: This “Wall Type Mount” is used for the installation of indoor or outdoor housing (STH-330POV
/ STH-330PIV / STH-320PO) of Samsung Speed Dome Camera.
STB-330PPM
: It is the “Paul Mount” for Samsung Speed Dome cameras.
STB-496PPV
: This “Ceiling Type Mount” is used for the installation of indoor or outdoor housing (STH-
330POV / STH-330PIV / STH-320PO) of Samsung Speed Dome Camera.
STB-340PCM
: It is the “Coner mount” for Samsung Speed Dome cameras.
4
5
SPEED DOME CAMERA ACCESSORIES
SPEED DOME CAMERA ACCESSORIES
Installation Guide
Installation Guide
4. Connect the safety cable from the housing to the internal fixture ring of the STH-270PWV wall
mount.
STH-1000PO (Outdoor Housing)
1. Using the four screws that are enclosed, fix the STH-
270PWV wall mount onto the wall on the right hand
side of where the speed dome camera is to be
installed.
Cautions
Pull the connection cable out of the wall type mount
through the hole in advance.
2. Pull the safety cable that is fixed to the housing outside of the housing.
Cautions
Check the the safety cablesafety cable connection. If the safety cable is not connected, it may cause
injury or damage to the product.
5. Insert the cable into the housing and fit the housing into the internal groove of the wall mount,
making sure that the Samsung logo is facing the front.
3. Before installing the product on the mount, open the dome cover for the housing of the
outdoor speed dome and align the direction of the arrow for the camera holder with the
housing base, then fix it using the screws enclosed.
SPEED DOME CAMERA ACCESSORIES
6
7
SPEED DOME CAMERA ACCESSORIES
Installation Guide
Installation Guide
6. Connect the AC 24V power cable to the fan heater PCB cable
terminal.
9. Assemble the speed dome by turning it in the direction of the arrow.
10. Install the dome cover for the speed dome’s outdoor
housing.
7. Connect the video cable, the controller cable, the camera
power adapter cable and the ID setting cable to the speed
dome camera.
11. Make sure that all the devices are connected correctly to
the camera and then check the functions of the camera. If
there are no problems, affix the housing onto the wall
mount using the three screws.
Cautions
Before installing the outdoor housing on the wall mount, set the camera ID, the terminating
resistance and the protocol selection switch.
Cautions
8. Install the speed dome camera on its holder in the housing,
and make sure that it is facing in the right direction. (When
installing the camera, push the cables into the empty space of
the housing to make sure that the cables are not pinched.)
Check out the input voltage of the power adapter before connecting the power.
It is necessary to tighten the screw to prevent unfastening.
If the screw to prevent unfastening is not tight, the camera installed may fall due to vibration or
shock from the environment.
Set up the Camera ID, the Termination Resistance and the Protocol Selection Switch before
installing the outdoor housing on the ceiling type mount.
SPEED DOME CAMERA ACCESSORIES
8
9
SPEED DOME CAMERA ACCESSORIES
Installation Guide
Installation Guide
STB-496PP (Ceiling Type Mount)
STB-340PCM (Coner Mount)
1. Fix the ceiling type mount STB-496PPV at the desired installation location on the ceiling using 4
screws.
1. Drill holes in the wall to insert anchor bolts with spaces between the
holes in the wall matching those in the corner mount.
2. The remaining installation methods are the same as those for indoor/outdoor housing.
2. Insert the anchor bolts into the holes using a tool. Place the
corner mount through the anchor bolts. Fix the corner mount
by fastening the 8 nuts.
3. Fix the wall type mount(STB-270PWV) with four 1/4 inch
screws.
STB-30PF (Ceiling Flange)
1. The installation method for the ceiling type flange STB-30PF is the same as for the ceiling type mount.
The use of a separate pipe and ceiling bracket is optional.
STB-330PPM (Paul Mount)
1. Fix the paul mount by using wires.
2. Fix the wall type mount(STB-270PWV) with four 1/4 inch screws.
10
11
SPEED DOME CAMERA ACCESSORIES
SPEED DOME CAMERA ACCESSORIES
Installation Guide
Component Name
STB-350PPM (Parapet Mount)
Wall Mounting
1. Drill holes in the wall to insert anchor bolts with spaces
between the holes in the wall matching those in the
corner mount.
2. Insert the anchor bolts into the holes using a tool.
Place the corner mount through the anchor bolts. Fix
the corner mount by fastening the 8 nuts.
3. Insert the cables into the pipe through the opposite
end of the pipe.
4. Place the pipe on the parapet mount.
5. Arrange the cables as shown in the picture and adjust
the pipe cover with the screw.
6. Adjust the direction of the pipe and then fix it with
screws.
7. Install the product.
12
13
SPEED DOME CAMERA ACCESSORIES
SPEED DOME CAMERA ACCESSORIES
External Dimensions
Component Name
Ceiling Mounting
Wall Mounting
14
15
SPEED DOME CAMERA ACCESSORIES
SPEED DOME CAMERA ACCESSORIES
External Dimensions
Specification
Model
Ceiling Mounting
STH-1000PO
STB-270PWV
-20 C ~ 50 C
STB-496PPV
-20 C ~ 50 C
Item
Operating
-20 C ~ 50 C
-20 C ~ 70 C
0 to 90%RH
Temperature Range
Storage
-20 C ~ 70 C
-20 C ~ 70 C
Temperature Range
1 to 90%RH (non-condensing)
1 to 90%RH (non-condensing)
Humidity
Materials
Housing Outdoor
AL
Ceiling Flange
Ceiling Pipe
ALDC 12
SPPS 32A/Sch 40
E.G.I 2.0t
Wall Type Mount
Ceiling Bracket
ALDC 12
E.G.I 2.0t
Ring Decoration
Dome Cover
ALDC 12
Ceiling Bracket
Ceiling Plate
POLY
CARBONATE
SPCC
Self Drilling
Screw
#8 X L38(FZY)
Self Drilling
Screw
#8 X L38(FZY)
SCREW
(4EA)
SCREW
(4EA)
BH MS
M4 X L6
SCREW
(4EA)
Accessories
(mm)
SCREW
(3EA)
PH MS
M4 X 14
SCREW
(3EA)
PH MS
M4 X 14
DC 24V 0.06A
OperatingTemp.:
more than
Fan
45˚C
Others
DC 24V 0.8A
OperatingTemp.:
more less
Heater
10˚C
Antivibration/Waterproof
Weight (Net)
IP66
-
-
2,218g
3,160g
1,130g
1,320g
1,750g
1,970g
Weight (Gross)
Dimensions
Ø242 x 284.5
270 x 175 x 140
150 x 496
16
17
SPEED DOME CAMERA ACCESSORIES
SPEED DOME CAMERA ACCESSORIES
Specification
Model
STB-30PF
-20 C ~ 50 C
-20 C ~ 70 C
STB-350PPM
-20 C ~ 50 C
STB-340PCM
STB-330PPM
-20 C ~ 50 C
Item
Operating
-10 C ~ 50 C
Temperature Range
Storage
-20 C ~ 70 C
-20 C ~ 70 C
-20 C ~ 70 C
Temperature Range
0 to 90%RH
1 to 90%RH (non-condensing)
(non-condensing)
Coner
(non-condensing)
Humidity
Materials
PF 11/4
(32A)
Paul Bracket
Parapet Pipe
SPCC
SPCC
1/4´´
Ceiling Flange
ALDC 12
E.G.I 2.0t
Bracket
Parapet Plate
Pipe Cover
SUS
SUS
Ceiling Pipe
PH MS
M4 X 14
SUS
Set Anchor -6
(8EA)
SCREW
(3EA)
SCREW
1/4´´
SCREW
(4EA)
1/4´´
(4EA)
Accessories
(mm)
SCREW
(2EA)
M16 X20
(SUS)
Set Anchor -6
1/4´´
(8EA)
PH MS
M3 X10
(SUS)
SCREW
(2EA)
Others
Antivibration/Waterproof
Weight (Net)
-
-
-
-
366g
8,000g
1,308g
584g
Weight (Gross)
Dimensions
126 X 66
680 X 920 X 63
306 X 194 X 185
185 X 155 X 48
18
SPEED DOME CAMERA ACCESSORIES
|