This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Click a topic
User Manual
ST65/ST67
Health and safety information
Do not use batteries for unintended purposes.
Caution—situations that could cause damage to your
camera or other equipment
This may cause a fire or electric shock.
Do not touch the flash while it fires.
Remove the batteries from your camera when storing it
for an extended period of time.
The flash is very hot when fired and may burn your skin.
When you use AC charger, turn off the camera before you
disconnect the power to the AC charger.
Installed batteries may leak or corrode over time and cause
serious damage to your camera.
Failing to do so may result in fire or electric shock.
Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries. Do not damage or heat the battery.
Disconnect chargers from power sources when not in use.
This may cause a fire or personal injuries.
Failing to do so may result in fire or electric shock.
Use only Samsung-approved batteries, chargers, cables
and accessories.
Do not use a damaged power supply cord, plug, or loose
outlet when you charge batteries.
• Unauthorized batteries, chargers, cables or accessories can
cause batteries to explode, damage your camera, or cause
injury.
This may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the
+/- terminals on the battery.
• Samsung is not responsible for damages or injuries caused by
unapproved batteries, chargers, cables or accessories.
This may cause a fire or electric shock.
2
Health and safety information
Do not force the camera’s parts or apply pressure to the
camera.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or
damages that may result from camera malfunction or improper
use.
This may cause your camera to malfunction.
Exercise caution when you connect cables or adapters
and install batteries and memory cards.
You must plug the end of the cable with the indicator light
(▲) into your camera.
If you force the connectors, improperly connect cables, or
improperly install batteries and memory cards, you can damage
ports, connectors, and accessories.
If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Keep cards with magnetic strips away from the camera
case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause
a fire.
3
Organization of the user manual
Copyright information
• Microsoft Windows and the Windows logo are registered trademarks
of the Microsoft Corporation.
• micro SD™, micro SDHC™ are registered trademarks of the SD
Association.
• Mac is a registered trademark of the Apple Corporation.
• Trademarks and trade names used in this manual are the property of
their respective owners.
• Camera specifications or contents of this manual may be
changed without prior notice due to upgrade of camera functions.
• You are not allowed to reuse or distribute any part of this manual
without prior permission.
• For Open Source License information, refer to the
“OpenSourceInfo.pdf” in the provided CD-ROM.
4
Indications used in this manual
Icons used in this manual
Shooting mode
Indication
Icon Function
Additional information
Smart Auto
Safety warnings and precautions
Program
DIS
Camera buttons; for example: [Shutter] represents the
shutter button.
[
(
]
)
Page number of related information
Scene
Movie
The order of options or menus you must select to
perform a step. For example: Select Shooting → White
Balance represents select Shooting, and then select
White Balance.
→
*
Annotation
Shooting mode icons
These icons indicate that a function is available in the
corresponding modes. The
for all scenes.
mode may not support functions
Abbreviations used in this manual
e.g.)
Abbreviation Definition
ACB
AEB
AF
Auto Contrast Balance
Auto Exposure Bracket
Auto Focus
Available in the
Program, DIS, and
Movie modes
DIS
DPOF
EV
Digital Image Stabilization
Digital Print Order Format
Exposure Value
ISO
WB
International Organization for Standardization
White Balance
5
Expressions used in this manual
Pressing the shutter
Exposure (Brightness)
• Half-press [Shutter]: Press the shutter halfway down.
• Press [Shutter]: Press the shutter all the way down.
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO speed. By altering the exposure, your
photos will be darker or lighter.
Half-press [Shutter]
Press [Shutter]
Normal exposure
Overexposure (too bright)
Subject, background, and composition
• Subject: The main object of a scene, such as a person,
animal, or still life.
• Background: The objects around the subject.
• Composition: The combination of a subject and background.
Background
Composition
Subject
6
Basic troubleshooting
You can get answers to common questions. Solve problems easily by setting shooting options.
The subject's eyes
appear red.
This is caused by a reflection from the camera flash.
• Set the flash option to
Red-eye or
Red-eye Fix. (p. 38)
• If the photo has already been taken, select
Red-eye Fix in the edit menu. (p. 65)
Photos have dust
spots.
Dust particles floating in the air may be captured in photos when using the flash.
• Turn off the flash or avoid taking photos in a dusty place.
• Set ISO speed options. (p. 39)
Photos are blurred.
This may be caused by taking photos in low light conditions or holding the camera incorrectly.
• Press [Shutter] halfway down to make sure the subject is focused. (p. 24)
• Use the
mode. (p. 31)
Photos are blurred
when shooting at
night.
As the camera tries to let in more light, the shutter speed slows.
This can make it difficult to steady the camera and may result in camera shake.
• Turn on the flash. (p. 38)
• Set ISO speed options. (p. 39)
• Use a tripod to prevent your camera from shaking.
• Select
Night in the
mode. (p. 30)
Subjects come out
When the light source is behind the subject or when there is a high contrast between
too dark because of the light and dark areas, the subject may come out shaded.
backlighting.
• Avoid shooting with the sun behind your subject.
• Select Backlight in the mode. (p. 28)
• Set the flash option to Fill in. (p. 38)
• Set the Auto Contrast Balance (ACB) option. (p. 46)
• Adjust the exposure. (p. 46)
• Set the metering option to
Spot if a bright subject is in the center of the frame. (p. 47)
7
Quick reference
Taking photos of people
Adjusting the exposure (brightness)
•
•
•
Viewing files by category in
•
•
EV (to adjust exposure)
Deleting all files on the
•
•
•
mode > Beauty Shot
ACB (to compensate for subjects against bright
backgrounds) 46
mode > Portrait
Viewing files as a slide
show 58
Red-eye, Red-eye Fix (to prevent or correct red-eye)
•
•
Metering
AEB (to take three photos of the same scene with
•
•
Viewing files on a TV
•
Face Detection
Connecting your camera to a
computer 68
Taking photos at night or in the dark
•
•
•
Adjusting sound and volume
Applying a different effect
•
•
•
•
mode > Night
Adjusting the brightness of
mode > Sunset, Dawn, Fireworks
•
•
•
Photo styles (to apply tones)
Flash options
Changing the display
language 79
Smart filter effects
ISO speed (to adjust the sensitivity to light)
Image adjustment (to adjust saturation, sharpness, or
contrast) 52
•
•
Formatting the memory
Taking action photos
card
•
Troubleshooting
Reducing camera shake
•
Continuous, Motion Capture
•
mode
Taking photos of text, insects, or
flowers
•
•
•
mode > Close Up, Text
Macro, Auto Macro (to take close-up photos)
White Balance (to change the color tone)
8
Contents
10
Unpacking
Check your product box for the following items.
Optional accessories
Camera
AC adapter/USB cable
Rechargeable battery
Camera case
Memory card/
Memory card adapter
Strap
User Manual CD-ROM
Quick Start Manual
A/V cable
Battery charger
The illustrations may differ from your actual items.
Basic functions 12
Camera layout
Before you start, familiarize yourself with your camera's parts and their functions.
Zoom button
•
Zoom in or out in Shooting mode.
•
Zoom in on part of a photo or view files as thumbnails in
Playback mode.
•
Adjust volume in Playback mode.
Shutter button
POWER button
Microphone
Flash
AF-assist light/timer lamp
Lens
Speaker
Tripod mount
Battery chamber cover
Insert a memory card and battery
Basic functions 13
Camera layout
Smart button
Set to Smart mode (
)
Status lamp
•
Blinking: When the camera is saving a
photo or video, being read by a computer
or printer, or out of focus
•
Steady: When the camera is connecting
to a computer or in focus
USB and A/V port
Accepts USB cable or
A/V cable
Display
Mode button: Open the list of shooting modes
Button
Description
Icon
Mode
Description
Access options or menus
The camera automatically selects settings based
on a the type of scene (Night, Portrait, Sunset,
etc.) it detects.
In Shooting mode
While setting
Smart Auto
Change the display option
Change the macro option
Move up
Take a photo by setting options
Program
DIS
Move down
Navigation
Change the flash option
Change the timer option
Move left
The camera activates options that reduce camera
shake.
Move right
Take a photo with options preset for a specific
scene (Landscape, Portrait, Forest, etc.).
Scene
Movie
Confirm the highlighted option or menu
Enter Playback mode
Record a video.
Playback
Function
•
•
Access options in Shooting mode
Delete files in Playback mode
Basic functions 14
Inserting the battery and memory card
Learn to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Push the card gently until
the card disengages from
the camera, and then pull it
out of the slot.
Memory card
Battery lock
Insert a memory card with
the gold-colored contacts
facing up.
Push the lock up to release
the battery.
Battery
Insert the battery with the
Samsung logo facing down.
• You can use the internal memory as a temporary storage device
when the memory card is not inserted.
• Insert a memory card in the correct direction. Inserting a memory
card in the wrong direction may damage your camera and memory
card.
Basic functions 15
Charging the battery and turning your camera on
Charging the battery
Before using the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the indicator light into your camera.
Turning on your camera
Press [POWER] to turn your camera on or off.
•
The initial setup screen appears when you turn on the camera
for the first time. (p. 17)
Turning on your camera in Playback mode
Press [ ]. The camera turns on and accesses Playback mode
immediately.
Indicator light
• Red: Charging
• Green: Fully charged
When you turn on your camera by pressing and holding [
5 seconds, the camera does not emit any camera sounds.
] for about
Basic functions 16
Performing the initial setup
The initial setup screen appears to allow you to configure the camera's basic settings.
Press [
].
Press [
] or [ ] to select Date/Time Set and press
].
Press [ ] or [ ] to select an item.
1
6
7
•
The initial setup screen appears when you turn on the camera
for the first time.
[
] or [
Press [ ] to select Language and press [ ] or [
].
2
Press [
Press [
] or [ ] to set the date and time and press [
] or [ ] to select Date Type and press
].
].
8
9
Press [
Press [
] or [ ] to select a language and press [
].
3
4
] or [ ] to scroll to Time Zone and press
].
[
] or [
[
] or [
Press [ ] or [ ] to select a time zone and press [
].
5
•
To set the daylight-saving time, press [
].
Press [
Press [
] or [ ] to select a date format and press [
] to switch to the Shooting mode.
].
10
11
Basic functions 17
Learning icons
The icons displayed will change according to the mode you select or the options you set.
A
C. Icons on the left
Icon
Description
Icon
Description
Auto focus frame
Aperture and shutter speed
Camera shake
Zoom ratio
B
Long time shutter
Exposure value
White balance
Face tone
Current date and time
B. Icons on the right
C
Icon
Description
Face retouch
ISO speed
Photo resolution
A. Information
Video resolution
Frame rate
Icon
Description
Photo style
Selected shooting mode
Available number of photos
Available recording time
Internal memory
Image adjustment
(contrast, sharpness, saturation)
Photo quality
Metering option
Flash option
Video Stabilizer
Smart filter effect
Voice recording available when
shooting video
Memory card inserted
Timer option
•
•
•
: Fully charged
: Partially charged
: Charging needed
Auto focus option
Face detection
Burst type
Voice memo (On)
Basic functions 18
Selecting options
You can select options by pressing [
], and then using the navigation buttons ([
], [ ], [ ], [ ]).
You can also access shooting options by pressing [ ], but some options are not available.
Going back to the previous menu
In Shooting mode, press [
].
1
2
Press [
] again to go back to the previous menu.
Use the navigation buttons to scroll to an option or
menu.
Half-press [Shutter] to return to the Shooting mode.
•
To move up or down, press [
] or [ ].
•
To move left or right, press [ ] or [ ].
Press [
] to confirm the highlighted option or menu.
3
Basic functions 19
Selecting options
Example: Selecting a White Balance option in the P mode
Press [
press [ ] or [ ].
] or [ ] to scroll to White Balance, and then
5
6
In Shooting mode, press [
].
1
2
Photo Size
Press [
press [
] or [ ] to scroll to Program, and then
Quality
EV
].
ISO
Smart Auto
Program
DIS
White Balance
Face Detection
Focus Area
Exit
Back
Scene
Movie
Press [ ] or [ ] to scroll to a White Balance option.
This mode allows you to directly set various
features for shooting.
Press [
].
3
4
Daylight
Photo Size
Quality
EV
Shooting
Sound
ISO
Back
Move
Display
Settings
White Balance
Face Detection
Focus Area
Press [
].
7
Exit
Change
Press [
press [ ] or [
] or [ ] to scroll to Shooting, and then
].
Basic functions 20
Setting the display and sound
Learn how to change the basic display and sound settings.
Changing the display type
Select a display type for Shooting or Playback mode. Each type
displays different shooting or playback information.
Setting the sound
Set whether your camera emits a specified sound when you
operate your camera.
Press [
] repeatedly to change a display type.
In Shooting or Playback mode, press [
].
1
2
Select Sound → Beep Sound → an option.
Options
Off
Description
The camera does not emit any sounds.
Show all photographic
information.
The camera emits one of three sounds, depending
on the option you select.
1/2/3
Modes
Display Type Choices
• Display all information about shooting
• Hide information about shooting, except the
available number of photos (or available recording
time) and the battery icon
Shooting
• Display all information about the current photo
• Hide all information about the current file
Playback
• Display information about the current file, except the
shooting settings and captured date
Basic functions 21
Taking photos
Learn basic actions to take photos easily and quickly in the Smart Auto mode.
Half-press [Shutter] to focus.
In Shooting mode, press [
].
4
1
2
•
A green frame means the subject in focus.
Press [
press [
] or [ ] to scroll to Smart Auto, and then
•
A red frame means the subject is out of focus.
].
Smart Auto
Program
DIS
Scene
Movie
This mode recognizes the scene
automatically.
Press [Shutter] to take a photo.
5
Align your subject in the frame.
3
See page 24 for tips to get clearer photos.
Basic functions 22
Taking photos
Digital zoom
Zooming
If the zoom indicator is in the digital range, your camera is using
the digital zoom. The picture quality may deteriorate when you
use the digital zoom.
You can shoot close-up photos by adjusting the zoom. Your
camera has a 5X optical zoom and 3X digital zoom. By using
both, you can zoom in up to 15 times.
Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom]
left to zoom out.
Optical range
Zoom indicator
Digital range
• The Digital zoom is not available with the Face Detection options,
Smart Filter effect or Tracking AF option.
• It may take longer to save a photo when you are using the digital
zoom.
Zoom ratio
Zoom out
Zoom in
Basic functions 23
Tips for getting a clearer photo
Reducing camera shake
Holding your camera correctly
Make sure nothing is
blocking the lens.
Select the
digitally. (p. 31)
mode to reduce camera shake
When
is displayed
Half-pressing the shutter button
Half-press [Shutter] and adjust the
focus. The camera adjusts the focus and
exposure automatically.
Camera shake
When shooting in the dark, avoid setting the flash option to
Slow Sync or Off. The aperture remains open longer and it may be
harder to hold the camera still.
The camera sets the aperture value
and shutter speed automatically.
• Use a tripod or set the flash option to Fill in. (p. 38)
Focus frame
• Set ISO speed options. (p. 39)
• Press [Shutter] to take the photo if
the focus frame appears in green.
• Change the composition and half-
press [Shutter] again if the focus
frame appears in red.
Basic functions 24
Preventing your subject from being out of focus
• When you take photos in low light
It may be difficult to get your subject in focus when:
- there is little contrast between the subject and background
(for example, when your subject is wearing clothing that is similar in color
to the background)
Turn on the flash.
(p. 38)
- the light source behind the subject is too bright
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
• When subjects are moving fast
Use the continuous
or motion capture
function. (p. 49)
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.
Basic functions 25
Shooting modes
Take photos or record videos by selecting the best shooting mode for the conditions.
Using the Smart Auto mode
Icon
Description
In this mode, your camera automatically chooses the appropriate
camera settings based on the type of scene it defects.
Smart Auto Mode is helpful if you are not familiar with the camera
settings for various scenes.
Appears when taking photos of landscapes at night.
This is available only when the flash is off.
Appears when taking portraits at night.
Appears when taking photos of landscapes with
backlighting.
In Shooting mode, press [
Select Smart Auto.
].
1
2
3
Appears when taking portraits with backlighting.
Appears when taking portraits.
Align your subject in the frame.
Appears when taking close-up photos of objects.
Appears when taking close-up photos of text.
Appears when taking photos of sunsets.
Appears when taking photos of clear skies.
Appears when taking photos of forested areas.
•
The camera selects a scene automatically. An appropriate
scene mode icon appears at the top left of the screen. The
icons are listed below.
Appears when taking close-up photos of colorful
subjects.
Appears when the camera is stable (on a tripod, for
example) and the subject is motionless for a period
of time. This is available only when you are shooting
in the dark.
Icon
Description
Appears when taking photos of actively moving
subjects.
Appears when taking photos of landscapes.
Appears when taking photos with bright white
backgrounds.
Extended functions 27
Shooting modes
Half-press [Shutter] to focus.
4
5
Using the Scene mode
Take a photo with options preset for a specific scene.
Press [Shutter] to take the photo.
In Shooting mode, press [
].
1
2
•
If the camera does not recognize a proper scene mode,
and the camera uses default settings.
appears
Select Scene → a scene.
• Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
• The camera may not select the correct scene depending on the
shooting condtions, such as camera shake, lighting, and distance
to the subject.
Beauty Shot
Frame Guide
Night
Portrait
• Even if you use a tripod, the camera may not detect the
mode
Children
depending on the subject's movement.
Landscape
Close Up
• In
mode, the camera consumes more battery power, because
it changes settings often to select appropriate scenes.
This mode is appropriate for taking pictures
of faces.
•
•
•
•
To change the scene mode, press [
Scene → a scene.
For the Beauty Shot mode, see “Using the Beauty Shot
mode" on page 29.
For the Frame Guide mode, see “Using the frame guide" on
page 30.
For the Night mode, see “Using the Night mode” on page 30.
], and then select
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Press [Shutter] to take the photo.
Extended functions 28
Shooting modes
Select Shooting → Face Retouch → an option.
Using the Beauty Shot mode
Take a photo of a person with options to hide facial imperfections.
6
•
Select a higher setting to hide a greater number of
imperfections.
In Shooting mode, press [
].
1
2
3
Select Scene → Beauty Shot.
Level 2
To make the subject's skin tone appear lighter (face
only), press [ ], and then go to Step 4. To hide
facial imperfections, press [
5.
], and then go to Step
Back
Move
Select Shooting → Face Tone → an option.
4
Align your subject in the frame, and then half-press
[Shutter] to focus.
7
8
•
Select a higher setting to make skin tone appear lighter.
Press [Shutter] to take the photo.
Level 2
The focus distance will be set to Auto Macro.
Back
Move
To hide facial imperfections, press [
].
5
Extended functions 29
Shooting modes
Using the frame guide
Using the Night mode
Use the Night mode to take a photo with options for preset for
shooting at night. Use a tripod to prevent your camera from
shaking.
When you want another person to take a photo of you, you can
compose the scene with the frame guide feature. The frame
guide helps the other person take a photo of you by showing part
of the pre-composed scene.
In Shooting mode, press [
].
1
2
3
In Shooting mode, press [
].
1
2
3
Select Scene → Night.
Select Scene → Frame Guide.
Align your subject in the frame, and then half-press
[Shutter] to focus.
Align your subject in the frame, and then press [Shutter].
•
Transparent guides appear on the left and right of the frame.
Press [Shutter] to take the photo.
4
Adjusting the exposure in the Night mode
In Night mode, you can use a slow shutter speed to extend
the time until the shutter closes. Increase the aperture value to
prevent overexposure.
Cancel Frame: OK
In Shooting mode, press [
].
1
2
3
4
Ask another person to take a photo.
4
5
Select Scene → Night.
•
The person aligns the subject in the frame using the guides,
and then presses [Shutter] to take the photo.
Press [
].
To cancel the guides, press [
].
Select Shooting → Long Time Shutter.
Extended functions 30
Shooting modes
Select the aperture value or shutter speed.
5
Using the DIS mode
Reduce camera shake and prevent blurred photos with Digital
Image Stabilization functions.
Auto
Auto
Aperture value
Shutter speed
Aperture
Back
Move
Before correction
After correction
Select an option.
6
•
If you select Auto, the camera adjusts the aperture value or
In Shooting mode, press [
].
shutter speed automatically.
1
2
3
Select DIS.
Align your subject in the frame, and then half-press
[Shutter] to focus.
7
8
Align your subject in the frame, and then half-press
[Shutter] to focus.
Press [Shutter] to take the photo.
Press [Shutter] to take the photo.
4
Use a tripod to prevent your photos from blurring.
• The digital zoom does not work in this mode.
• If your subject is moving rapidly, the photo may be blurry.
• The DIS function may not work where the lighting is brighter than that
of a fluorescent lamp.
Extended functions 31
Shooting modes
Using the Program mode
In the Program mode, you can set various options except
the shutter speed and aperture value, which the camera sets
automatically.
Recording a video
In Movie mode, you can record high-definition videos in
1280 X 720 HQ resolution. You can record up to 2 GB
(approximately 9 minutes) at 1280 X 720 HQ resolution and the
camera saves recorded videos as MJPEG files.
In Shooting mode, press [
Select Program.
Set options.
].
1
2
3
Some memory cards may not support high definition recording. If this occurs,
set a lower resolution. (p. 36)
(For a list of options, refer to “Shooting options”.)
In Shooting mode, press [
].
1
2
3
4
Select Movie.
Press [
].
Select Movie → Frame Rate → a frame rate (the
number of frames per second).
•
As the frame rate increases, action appears more natural, but
the file size also increases.
Align your subject in the frame, and then half-press
[Shutter] to focus.
• 60 FPS is available only when you set the video resolution to
320 X 240.
• The zoom ratio and angle of view might decrease when
shooting video.
• 24 FPS is available only when you set the video resolution to
1280 X 720 HQ.
4
5
Press [Shutter] to take the photo.
Extended functions 32
Shooting modes
To pause recording
Press [
].
5
6
The camera allows you to pause a video temporarily while
recording. With this function, you can record several scenes as a
single video.
Select Movie → Voice → a sound option.
Option Description
Press [
] to pause while recording. Press it again to resume.
On: Record a video with sound.
Off: Record a video without sound.
Zoom Mute: The camera stops recording sound
temporarily when you use the zoom.
Press [
].
7
8
Select Movie → Stabilizer → a stabilizer option.
Stop
Pause
Option Description
Off: Record a video with the image stabilization function
turned off.
On: Record a video with the image stabilization function
turned on to prevent your video from blurring.
Set other options as desired.
(For options, refer to “Shooting options”.)
9
Press [Shutter] to start recording.
10
11
Press [Shutter] again to stop recording.
Extended functions 33
Recording voice memos
Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of
shooting conditions.
You will get the best sound quality when recording 16 inches (40 cm.) away from the camera.
Recording a voice memo
Adding a voice memo to a photo
In Shooting mode, press [
].
In Shooting mode, press [
].
1
1
2
3
Select Shooting → Voice → Record.
Select Shooting → Voice → Memo.
2
3
Press [Shutter] to record.
Align your subject in the frame, and then take a photo.
•
You can record voice memos of up to 10 hours in length.
•
Begin recording the voice memo right after taking the photo.
•
Press [
] to pause or resume recording.
Record a short voice memo (10 seconds maximum).
4
•
Press [Shutter] to stop recording a voice memo before the
10 seconds are up.
You cannot add voice memos to photos if you set Continuous, Motion
Capture, or AEB options.
Stop
Pause
Press [Shutter] to stop.
4
5
•
Press [Shutter] again to record a new voice memo.
Press [ ] to switch to Shooting mode.
Extended functions 34
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
When recording a video
Selecting a resolution
As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size also
increases.
In the
mode, press [
].
1
2
Select Movie → Movie Size → an option.
Option Description
1280 X 720 HQ: For high-quality play back on an HDTV.
When taking a photo
640 X 480: For play back on a standard, analog TV.
In Shooting mode, press [
].
1
2
320 X 240: To post on a web page.
Select Shooting → Photo Size → an option.
Option Description
4320 X 3240: Print on A1 paper (23" x 34").
Selecting image quality
The camera compresses and saves the photos you take in JPEG
format. Higher quality images result in larger file sizes.
4224 X 2816: Print on A1 paper (23" x 34") in wide ratio
(3:2).
4000 X 3000: Print on A1 paper (22" x 34").
4224 X 2376: Print on A2 paper (17" x 22") in panorama
ratio (16:9) or play back on an HDTV.
In Shooting mode, press [
].
1
2
Select Shooting → Quality → an option.
Option Description
3264 X 2448: Print on A3 paper (17" x 11").
2592 X 1944: Print on A4 paper (8 1/2" x 11").
Super Fine: Capture photos in super high quality.
1920 X 1080: Print on A5 paper in panorama ratio (16:9)
or play back on an HDTV (5 3/4" x 8 1/2").
Fine: Capture photos in high quality.
1024 X 768: Attach to email.
Normal: Capture photos in normal quality.
The paper sizes in inches are approximate.
The options may differ depending on the shooting mode.
Shooting options 36
Using the timer
Learn how to set the timer to delay shooting.
In Shooting mode, press [ ].
Press [Shutter] to start the timer.
1
3
•
The AF-assist light/timer lamp blinks. The camera
automatically takes a photo at the specified time.
• Press [ ] to cancel the timer.
Off
• Depending on the face detection option you have selected, the timer
function or some timer options may not be available.
• When you set burst options, you cannot use the timer function.
Select an option.
2
Option Description
Off: The timer is not active.
10 Sec: Takes a photo in 10 seconds.
2 Sec: Takes a photo in 2 seconds.
Double: Takes a photo in 10 seconds, and then takes
another 2 seconds later.
The options may differ depending on the shooting mode.
Shooting options 37
Shooting in the dark
Learn how to take photos at night or in low light conditions.
Preventing red-eye
Using the flash
If the flash fires when you take a photo of a person in the dark,
a red glow may appear in the person's eyes. To prevent this,
select Red-eye or Red-eye Fix. Refer to flash options in
"Using the flash."
Use the flash when taking photos in the dark or when you need
more light in your photos.
In Shooting mode, press [ ].
1
Auto
Select an option.
2
Option Description
Off:
• The flash does not fire.
• The camera displays the camera shake warning (
)
when you are shooting in low light.
Auto: The camera selects a proper flash setting for the
scene it detects in the mode.
Shooting options 38
Shooting in the dark
Option Description
•
Flash options are not available if you set Continuous, Motion Capture,
AEB options or select Self-Portrait or Blink Detection.
• Make sure that your subjects are within the recommended distance
from the flash. (p. 95)
• If light from the flash is relected or there is a large amount of dust in
the air, tiny spots may appear in your photo.
Red-eye Fix*:
• The flash fires twice when the subject or background
is dark. The subject should not move until the flash
fires a second time.
• The camera corrects red-eyes through its advanced
software analysis.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to
capture ambient light to reveal more details in the
background.
Adjusting the ISO speed
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning ( ) when
you are shooting in low light.
Fill in:
• The flash always fires.
In Shooting mode, press [
].
1
2
• The camera adjusts light intensity automatically.
Red-eye*:
Select Shooting → ISO → an option.
• The flash fires when the subject or background is
dark.
•
Select to use an appropriate ISO speed based on the
brightness of the subject and lighting.
• The camera reduces red-eyes.
Auto: The flash fires automatically when the subject or
background is dark.
• The higher ISO speed you select, the more image noise you may get.
• When you select Motion Capture, the camera sets the ISO speed
to Auto.
The options may differ depending on the shooting mode.
• When the
is selected, the image size is fixed to under 5M.
Shooting options 39
Changing the camera’s focus
Learn how to adjust the camera's focus.
Using macro
Use macro to take close-up photos of subjects, such as flowers
or insects. Refer to macro options in “Using auto focus”.
Using auto focus
To take sharp photos, select the appropriate focus according to
your distance from the subject.
In Shooting mode, press [ ].
1
Normal (AF)
Select an option.
2
Option Description
Normal (AF): Focus on a subject farther than 32 in. (80 cm)
from the camera. Farther than 39 in. (100 cm) when using
the zoom.
• Try to hold the camera very still to prevent blurry photos.
• Turn off the flash if the distance to the subject is less than 16 in.
(40 cm.)
Macro: Focus on a subject 2 to 32 in. (5 - 80 cm ) from
the camera. 39 in. to 59 in. (100 cm - 150 cm) when
using the zoom.
Auto Macro: Focus on a subject farther than 2 in. (5 cm).
Farther than 39 in. (100 cm) when using the zoom.
The options may differ depending on the shooting mode.
Shooting options 40
Changing the camera’s focus
Using tracking auto focus
• If you do not touch any area on the screen, the focus frame will
appear in the center of the screen.
• Tracking a subject may fail when:
Tracking AF allows you to track and auto focus on your subject,
even when you are moving.
-
-
-
the subject is too small or the subject moves excessively
the subject is backlit or you are shooting in a dark place
colors or patterns on the subject and the background are the
same
In Shooting mode, press [
].
1
2
3
Select Shooting → Focus Area → Tracking AF.
-
the camera shakes excessively
In these cases, the focus frame appears as a white, single-line frame (
).
Focus on the subject you want to track, and then press [
].
• If the camera fails to track the subject, you must reselect the subject
to track.
• If the camera fails to fix the focus, the focus frame changes to a red,
•
A focus frame appears on the subject and follows the subject
as you move the camera.
single-line frame (
).
• If you use this function, you cannot set self timer options, Face
Detection options, Photo Style options and Smart Filter options.
•
•
The white frame means that your camera is tracking the
subject.
The green frame means that your subject is in focus when you
half-press [Shutter].
Shooting options 41
Changing the camera’s focus
Adjusting the focus area
You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.
In Shooting mode, press [
].
1
2
Select Shooting → Focus Area → an option.
Option Description
Center AF: Focus on the center. Suitable when subjects
are located in the center.
Multi AF: Focus on one or more of 9 possible areas.
Tracking AF: Focus on and track the subject. (p. 41)
The options may differ depending on the shooting mode.
Shooting options 42
Using face detection
If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to
capture a smiling face.
Detecting faces
• In some scene modes, face detection is unavailable.
• Face detection may not be effective when:
Your camera automatically detects human faces (up to 10 faces
-
the subject is far from the camera (The focus frame will appear
orange for Smile Shot and Blink Detection.)
it is too bright or too dark
in one scene).
-
-
-
-
-
the subject is not facing the camera
the subject is wearing sunglasses or a mask
the subject is in backlit or the lighting condition is unstable
the subject’s facial expression changes remarkably
• Face detection is not available when using a photo style, smart filter
effect, or image adjustment option or when used with Tracking AF.
• Face detection is not available when you are using the digital zoom.
• Depending on the face detection option you selected, the timer or
some timer options are not available.
• Depending on the face detection option you selected, some burst
options are not available.
In Shooting mode, press [
].
1
2
Select Shooting → Face Detection → Normal.
•
The nearest face appears in a white focus frame and the rest
of the faces appear in gray focus frames.
The closer you are to the subject, the quicker your camera detects faces.
Shooting options 43
Using face detection
Taking a self-portrait shot
Take photos of yourself. The camera automatically sets the photo
distance to close-up and emits a beep when ready.
Taking a smile shot
The camera automatically releases the shutter when it detects a
smiling face.
In Shooting mode, press [
].
1
2
When faces are located in the
center, the camera beeps rapidly.
Select Shooting → Face Detection → Smile Shot.
•
When your subject smiles broadly, your camera can detect
the smile more easily.
In Shooting mode, press [
].
1
2
3
Select Shooting → Face Detection → Self-Portrait.
When you hear a beep, press [Shutter].
If you turn Volume off in the sound settings, the camera will not emit a beep. (p. 78)
Shooting options 44
Using face detection
Detecting eye blinking
If your camera detects closed eyes, it automatically takes two
photos in succession.
In Shooting mode, press [
].
1
2
Select Shooting → Face Detection → Blink
Detection.
• Hold your camera still while “Capturing” is displayed on the screen.
• When blink detection fails, the “Picture taken with eyes closed.”
message appears. Take another photo.
Shooting options 45
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually
(EV)
Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.
Compensating for backlighting (ACB)
When the light source is behind your subject or there is high
contrast between your subject and the background, your subject
is likely to appear dark in the photo. If this occurs, turn the Auto
Contrast Balance (ACB) option on.
Darker (-)
Neutral (0)
Brighter (+)
Without ACB
With ACB
In Shooting mode, press [
].
1
2
3
In Shooting mode, press [
].
1
2
Select Shooting or Movie → EV.
Select Shooting → ACB → an option.
Select a value to adjust the exposure.
Option Description
• Once you adjust the exposure, the setting will remain the same. You
may need to change the exposure value later to avoid overexposure
or underexposure.
Off: ACB is off.
On: ACB is on.
• If you cannot decide on an appropriate exposure, select AEB (Auto
Exposure Bracket). The camera takes three photos, each with a
different exposure: normal, underexposed, and overexposed. (p. 49)
The ACB feature is not available when you set Continuous, Motion
Capture, AEB options.
Shooting options 46
Adjusting brightness and color
Changing the metering option
The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.
Selecting a light source
(White balance)
The color of your photo depends on the type and quality of
the light source. If you want the color of your photo to be
realistic, select a white balance setting that matches the lighting
conditions, such as Daylight, Cloudy, or Tungsten.
In Shooting mode, press [
].
1
2
Select Shooting or Movie → Metering → an option.
Option Description
Multi:
• Your camera divides the scene into several areas, and
then measures the light intensity of each area.
• Suitable for general photos.
(Auto WB)
(Daylight)
Spot:
• Your camera measures only the light intensity of the
very center of the frame.
• If a subject is not in the center of the scene, your
photo may be improperly exposed.
• Suitable for a subject with backlighting.
Center-weighted:
• Your camera averages the meter reading of the entire
frame with emphasis placed on the center.
(Cloudy)
(Tungsten)
• Suitable for photos with subjects in the center of the
frame.
Shooting options 47
Adjusting brightness and color
Defining your own white balance
In Shooting mode, press [
].
1
In Shooting mode, press [
].
Select Shooting or Movie → White Balance → an option.
1
2
Icon
Description
Select Shooting or Movie → White Balance →
Custom Set.
2
Auto WB: Automatically sets the white balance based
on the lighting conditions.
Aim the lens at a piece of white paper.
3
Daylight: Select when taking outdoor photos on a
sunny day.
Cloudy: Select when taking outdoor photos on a cloudy
day or in shadows.
Fluorescent_H: Select when shooting under a daylight
fluorescent or three-way fluorescent light.
Fluorescent_L: Select when shooting under white
fluorescent light.
Tungsten: Select when taking indoor photos under
incandescent bulbs or halogen lamps.
Press [Shutter].
4
Custom Set: Use white balance settings you defined.
(See procedure at right.)
Shooting options 48
Using burst modes
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes to take multiple pictures rapidly.
• You can use the flash, timer, ACB, and Smart Filter only when
you select Single.
• When you select Motion Capture, the resolution is set to VGA
and the ISO speed is set to Auto.
• Depending on the face detection option you selected, some
burst options are not available.
In Shooting mode, press [
].
1
2
Select Shooting → Drive → an option.
Option Description
Single: Take a single photo.
Continuous:
• While you are pressing [Shutter], the camera takes
photos continuously.
• Maximum of 3 photos
Motion Capture:
• While you are pressing [Shutter], the camera takes
VGA photos (6 photos per second; maximum of 30
photos).
AEB:
• Take 3 photos with different exposures: normal,
underexposed, and overexposed.
• Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.
Shooting options 49
Improving your photos
Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments.
Defining your own RGB tone
Applying photo styles
Apply a different photo style to your photos, such as Soft, Vivid,
In Shooting mode, press [
].
1
2
or Forest.
Select Shooting or Movie → Photo Style Selector →
Custom RGB.
Select a color (R: Red, G: Green, B: Blue).
3
Soft
Vivid
Forest
In Shooting mode, press [
].
1
2
Select Shooting or Movie → Photo Style Selector →
an option.
Back
Move
•
Select Custom RGB to define your own RGB tone.
Adjust the amount of the selected color.
(-: less or +: more)
4
If you apply photo styles, you cannot set face detection, smart filter, or image
adjustment.
Shooting options 50
Improving your photos
Applying smart filter effects
Apply various filter effects to your photos to create unique images.
Option Description
Normal: No effect.
Miniature: Apply a tilt-shift effect to make the subject
appear in miniature.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Fish-eye: Distort close objects to imitate the visual effect
of a fisheye lens.
Miniature
Vignetting
Sketch: Apply a pen sketch effect.
Defog: Make a photo clearer.
• If you select Miniature when you are recording a video, the camera
will not record sound.
• When you apply a smart filter effect while you are recording a video,
Fish-eye
Sketch
the recording speed will be set to
be set to less than
• If you set Smart Filter effects, you cannot use the Face Detection
options, photo style options, ACB, burst options, Image Adjustment
options or Tracking AF.
and the recording resolution will
.
In Shooting mode, press [
].
1
2
3
Select Shooting or Movie → Smart Filter.
Select an effect.
Shooting options 51
Improving your photos
Adjusting your photos
Saturation option Description
Adjust the contrast, sharpness, and saturation of your photos.
-
Decrease the saturation.
Increase the saturation.
+
In Shooting mode, press [
].
1
2
3
Select Shooting → Image Adjust.
• Select 0 if you do not want to apply any effects (suitable for printing).
• If you use this function, you cannot set the photo style and smart
filter effects.
Select an adjustment option.
•
•
•
Contrast
Sharpness
Saturation
Select a value to adjust the selected item.
4
Contrast option
Description
-
Decrease the color and brightness.
Increase the color and brightness.
+
Sharpness option Description
Soften the edges on your photos. Suitable
for editing the photos on your computer.
-
Sharpen the edges to improve the clarity
of your photos. This may also increase the
noise on your photos.
+
Shooting options 52
Playing back
Learn how to play back photos, videos, or voice memos, and manage files.
Display in Playback mode
Starting Playback mode
View photos or play videos and voice memos stored in your
camera.
Press [ ].
1
•
•
The most recent file will be displayed.
If the camera is off, it will turn on and display the most recent
file.
Information
Press [ ] or [ ] to scroll through files.
2
•
Press and hold to scroll through files quickly.
Icon
Description
• If you want to view files stored in the internal memory, remove your
memory card.
• The camera will not properly play back files that are too large or those
taken with cameras from other manufacturers.
Photo includes a voice memo
Video file
Print order has been set (DPOF)
Protected file
Folder name – File name
To display file information on the screen, press [
].
Playback/Editing 54
Playing back
Viewing files by category in Smart Album
Press [ ] or [ ] to scroll through files.
4
5
•
Press and hold to scroll through files quickly.
View and manage files by categories, such as date, file type, or
week.
Press [ ] to return to the normal view.
In Playback mode, rotate [Zoom] left.
1
Press [
].
2
3
Select a category.
Type
Date
Color
Week
Back
Set
Option
Type
Description
View files by file type.
Date
View files by the date they were saved.
View files by the dominant color of the image.
View files by the weekday they were saved.
Color
Week
• When selecting Color, Etc is shown if color is not extracted.
• It may take some time for the camera to open Smart Album or to
change the category and recognize files.
Playback/Editing 55
Playing back
Viewing files as thumbnails
Protecting files
Scan thumbnails of files.
Protect your files from accidental deletion.
In Playback mode, press [
].
1
2
3
4
In Playback mode, rotate [Zoom] left to display 9
or 20 thumbnails. Rotate [Zoom] right to return to
the previous mode.
Select File Options → Protect → Select.
To protect all files, select All → Lock.
To protect a single file, select the file you want to protect,
and then press [
].
•
Press [
] again to cancel your selection.
Protected file
Filter
To
Do this
Scroll through files
Delete files
Select
Set
Press [
], [ ], [ ] or [ ].
Press [ ], and then select Yes.
Repeat Step 4 to protect additional files individually.
5
6
Press [
].
You cannot delete or rotate a protected file.
Playback/Editing 56
Playing back
Deleting files
Copying files to the memory card
Delete single files or all files at once. You cannot delete protected
files.
You can copy files from the internal memory to a memory card.
In Playback mode, press [
].
1
2
3
To delete a single file,
Select File Options → Copy to Card.
In Playback mode, select a file, and then press [
].
Select Yes to copy files.
1
2
Select Yes to delete the file.
To delete multiple files,
In Playback mode, press [
].
1
Select Multiple Delete.
2
Select the files you want to delete, and then press [
].
3
•
Press [
] again to cancel your selection.
Press [
].
Select Yes.
4
5
To delete all files,
In Playback mode, press [
].
1
Select File Options → Delete → All → Yes.
2
Playback/Editing 57
Playing back
Starting a slide show
Viewing photos
Zoom in on part of a photo or view photos in a slide show.
You can apply effects and add audio to your slide show.
In Playback mode, press [
Select Multi Slide Show.
].
1
2
3
Enlarging a photo
In Playback mode, rotate [Zoom] right to
enlarge a photo. Rotate [Zoom] left to shrink
a photo.
Select a slide show effect option.
•
Skip to step 5 to start a slide show with no effects.
Option
Description
Set whether or not to repeat the slide show.
(Play, Repeat)
Start
The enlarged area and zoom ratio are indicated on the top of the
screen. The maximum zoom ratio may vary depending on the
resolution.
Select the photos you want to view as a slide show.
• All: View all photos in a slide show.
Images
• Date: View photos captured on a specific date in
a slide show.
• Select: View selected photos in a slide show.
• Set the interval between photos.
Interval
• This is available when you select Off in the Effect
option. See below.
Music
Effect
Select a background audio.
Trim
• Select a transition effect.
• Select Off for no effects.
To
Do this
Press [
Press [
Move the enlarged area
], [ ], [ ] or [ ].
]. The trimmed photo is saved
Trim the enlarged photo
as a new file.
Playback/Editing 58
Playing back
Set the slide show effect.
4
5
Playing a video
You can play a video, capture an image from a video, or crop a
video.
Select Start → Play.
•
To loop the slide show, select Repeat.
•
Press [ ] to pause or resume the slide show.
In Playback mode, select a video, and then press [
].
1
To stop the slide show and switch to Playback mode, press [
] or [ ].
], and then
[
Pause
Use the following buttons to control playback.
2
Press
To
Scan backward.
Pause or resume playback.
Scan forward.
[
]
[
[
]
]
[Zoom] left or right
Adjust the volume level.
Playback/Editing 59
Playing back
Trimming a video during playback
Playing voice memos
Press [
] at the point where you want the new video
1
Playing a voice memo
to begin, and then rotate [Zoom] right.
In Playback mode, select a voice memo, and then press
1
Press [
Press [
] to resume playback.
2
3
[
].
] at the point where you want the new video
Use the following buttons to control playback.
2
to end, and then rotate [Zoom] right.
Press
To
Select Yes.
4
Scan backward.
Pause or resume playback.
Scan forward.
[
]
• The original video must be at least 10 seconds long.
• The camera saves the edited video as a new file.
[
[
[
]
]
Stop playback.
Adjust the volume level.
]
[Zoom] left or right
Capturing an image during playback
Press [
image.
] at the point where you want to save a still
1
2
Press [ ].
A captured image has the same resolution as the original video file and is
saved as a new file.
Playback/Editing 60
Playing back
Adding a voice memo to a photo
In Playback mode, select a photo, and then press
1
[
].
Select File Options → Voice memo → On.
2
3
Press [Shutter] to record a short voice memo
(10 seconds maximum).
•
Press [Shutter] to stop recording a voice memo.
You cannot add a voice memo to protected files.
Playing a voice memo added to a photo
In Playback mode, select a photo that includes a voice
memo, and then press [
].
•
Press [ ] to pause or resume playback.
Playback/Editing 61
Editing a photo
Perform photo editing tasks, such as resizing, rotating, eliminating red-eyes, and adjusting brightness, contrast, or saturation.
• The camera saves edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted
to a lower resolution.
Resizing photos
Rotating a photo
In Playback mode, select a photo, and then press
In Playback mode, select a photo, and then press
1
1
[
].
[
].
Select Edit → Resize → an option.
Select Edit → Rotate → an option.
2
2
•
Select
to save the photo as a start image. (p. 78)
Right 90˚
1984 X 1488
Back
Move
Back
Move
The rotated photo will be saved as the same file, not a new file.
Available options differ depending on the size of the selected photo.
Playback/Editing 62
Editing a photo
Defining your own RGB tone
Applying photo styles
Apply a different photo style to the photo, such as Soft, Vivid, or
Forest.
In Playback mode, select a photo, and then press
1
[
].
Select Edit → Photo Style Selector → Custom RGB.
2
3
Select a color (R: Red, G: Green, B: Blue).
Soft
Vivid
Forest
In Playback mode, select a photo, and then press
1
[
].
Back
Move
Select Edit → Photo Style Selector → an option.
2
•
Select Custom RGB to define your own RGB tone.
Adjust the amount of the selected color.
(-: less or +: more)
4
Soft
Back
Move
Playback/Editing 63
Editing a photo
Select a level.
Correcting exposure problems
Adjust ACB (Auto Contrast Balance), brightness, contrast, or
saturation; remove red-eye; hide facial imperfections; or add
noise to the photo.
3
•
As the number increases, the face becomes clearer.
Adjusting brightness/contrast/saturation
In Playback mode, select a photo, and then press
1
Adjusting ACB (Auto Contrast Balance)
[
].
In Playback mode, select a photo, and then press
1
Select Edit → Image Adjust.
2
3
[
].
Select an adjustment option.
Select Edit → Image Adjust → ACB.
2
•
•
•
: Brightness
: Contrast
: Saturation
Removing red-eye
Select a value to adjust the selected item.
(-: less or +: more)
4
In Playback mode, select a photo, and then press
1
2
[
].
Select Edit → Image Adjust → Red-eye Fix.
Adding noise to the photo
In Playback mode, select a photo, and then press
1
2
Hiding facial imperfections
[
].
In Playback mode, select a photo, and then press
Select Edit → Image Adjust → Add Noise.
1
2
[
].
Select Edit → Image Adjust → Face Retouch.
Playback/Editing 65
Editing a photo
Press [
].
Creating a print order (DPOF)
4
5
Select photos to be printed and set options, such as the number
of copies or paper size.
Select File Options → DPOF → Size → an option.
Option
Select
All
Description
• You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
Specify the print size for the selected photo.
Specify the print size for all photos.
Reset to the default settings.
Reset
• Wide photos may print with the left and right edges cut off, so be
aware of the dimensions of your photos.
• You cannot set the DPOF for the photos stored in the internal
memory.
If you select Select, scroll to a photo, and then rotate
[Zoom] left or right to select the print size. Repeat for the
6
photos you want to print, and then press [
If you select All, press [ ] or [ ] to select the print size,
and then press [ ].
].
•
In Playback mode, press [
].
1
2
Select File Options → DPOF → Standard → an option.
Option
Select
All
Description
Printing photos as thumbnails
Print photos as thumbnails to check all the photos at once.
Print the selected photos.
Print all photos.
Reset
Reset to the default settings.
In Playback mode, press [
].
1
2
Select File Options → DPOF → Index → Yes.
If you select Select, scroll to a photo, and then rotate
[Zoom] left or right to select the number of copies.
Repeat for the photos you want to print, and then press
3
If you specify the print size, you can print photos only with DPOF
1.1-compatible printers.
[
•
].
If you select All, press [
copies, and then press [
] or [ ] to select the number of
].
Playback/Editing 66
Viewing files on a TV
Play back photos or videos by connecting your camera to a TV using the A/V cable.
In Shooting or Playback mode, press [
].
1
2
3
• On some TVs, digital noise may occur or part of an image may not
appear.
• Images may not appear centered on the TV screen depending on
your TV settings.
• You can capture photos or videos while the camera is connected
to a TV.
Select Settings → Video Out.
Select a video signal output according to your country
or region.
Turn off your camera and TV.
4
5
Connect your camera to your TV using the A/V cable.
Audio
Video
Turn on your TV, and then select the video output mode
using the TV remote control.
6
Turn on your camera, and then press [ ].
7
8
View photos or play videos using the buttons on your
camera.
Playback/Editing 67
Transferring files to your Windows computer
Transfer files by connecting your camera to your Windows PC.
Requirements for Intelli-studio
• Intelli-studio may not perform correctly on some computers, even
when the computer meets the requirements.
Item
CPU
Requirements
• If your computer does not meet the requirements, videos may not
play correctly or it may take longer to edit videos.
• Install DirectX 9.0c or above before you use the program.
• Your computer must have Windows XP/Vista/7 or Mac OS 10.4 or
later for you to connect the camera to the computer as a removable
disk.
Intel Pentium 4, 3.2 GHz or higher/
AMD Athlon™ FX 2.6 GHz or higher
Minimum 512 MB RAM
(1 GB and above recommended)
RAM
OS
Windows XP SP2/Vista/7
Hard disk
capacity
250 MB or more (1 GB or more recommended)
• CD-ROM drive
Using a self-assembled PC or a PC and OS that are not supported may void
your warranty.
• nVIDIA Geforce 7600GT or higher/ATI X1600 series
or higher
Others
• 1024 x 768 pixels, 16-bit color display compatible
monitor (1280 x 1024 pixels, 32-bit color display
recommended)
• USB 2.0 port, Microsoft DirectX 9.0c or later
* The programs may not work properly on 64-bit Edition of Windows XP,
Windows Vista and Windows 7.
Playback/Editing 68
Transferring files to your Windows computer
Installing Intelli-studio
Insert the installation CD in a compatible CD-ROM drive.
1
When the setup screen is appears, click Samsung
Digital Camera Installer to start installation.
2
Select the programs to install, and then follow the
onscreen instructions.
3
Click Exit to complete the installation, and then restart
your computer.
4
Playback/Editing 69
Transferring files to your Windows computer
Run Intelli-studio on your computer.
Turn on the camera.
Transferring files using Intelli-studio
You can easily transfer files on your camera to your computer by
using Intelli-studio.
3
4
•
The computer recognizes the camera automatically.
Turn off the camera.
If the camera fails to connect, a pop-up window will appear.
Select Computer.
1
Connect the camera to your computer with the USB
cable.
2
Select a folder on your computer to save new files to.
5
6
You must plug the end of the cable with the indicator light (▲) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
•
If your camera has no new files, the pop-up window for saving
new files will not appear.
Select Yes.
New files are transferred to the computer.
•
The battery charges while the camera is connected to a computer with
the USB cable.
Playback/Editing 70
Transferring files to your Windows computer
Using Intelli-studio
The Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For details, select
Help → Help in the program.
• To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support → Update Intelli-studio →
Start Update from the program toolbar.
• You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
• Intelli-studio supports the following formats:
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
Photos: JPG, GIF, BMP, PNG, TIFF
1
2
3
4
5
6
7
15
14
13
8
9
12
10
11
Playback/Editing 71
Transferring files to your Windows computer
Transferring files by connecting the camera
as a removable disk
Icon
Description
1
Open menus
Connect the camera to your computer as a removable disk.
2
3
4
Display files in the selected folder
Change to the Photo edit mode
Change to the Video edit mode
Turn off the camera.
1
Connect the camera to your computer with the USB
cable.
2
Change to the Sharing mode (You can send files by email
or upload files to websites, such as Flickr or YouTube.)
5
6
7
Enlarge or reduce the thumbnails in the list
Select a file type
You must plug the end of the cable with the indicator light (▲) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
8
View files of the selected folder on your computer
Show or hide files of the connected camera
View files of the selected folder on the camera
View files as thumbnails or on a map
Browse folders in the connected device
Browse folders in your computer
9
10
11
12
13
14
Move to the previous or next folder
Print files, view files on a map, store files in My Folder, or
register faces
15
Playback/Editing 72
Transferring files to your Windows computer
Turn on the camera.
3
Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista/7 is
similar.
•
The computer recognizes the camera automatically.
If the camera fails to connect, a pop-up window will appear.
Select Computer.
If the status lamp on your camera is blinking, wait until
it stops.
1
On your computer, select My Computer → Removable
Disk → DCIM → 100PHOTO.
4
5
Click
screen.
on the tool bar at the bottom right of your PC
2
Select the files you want and drag or save them to your
computer.
Click the pop-up message.
3
4
5
Click the message box indicating safely removed.
Remove the USB cable.
The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.
Playback/Editing 73
Transferring files to your Mac computer
When you connect the camera to a Macintosh computer, the computer recognizes the camera automatically.
You can transfer files directly from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
Turn off the camera.
Turn on the camera.
1
2
3
•
The computer recognizes the camera automatically and
Connect your camera to a Macintosh computer with the
USB cable.
displays a removable disk icon.
If the camera fails to connect, a pop-up window will appear.
You must plug the end of the cable with the indicator light (▲) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Select Computer.
Double-click the removable disk icon.
4
5
Transfer photos or videos to the computer.
Playback/Editing 74
Printing photos with a PictBridge photo printer
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
Configuring print settings
In Shooting or Playback mode, press [
Select Settings → USB.
Select Printer.
].
1
2
3
4
Images
Size
: One Photo
: Auto
Layout
Type
: Auto
With the printer on, connect your camera to the printer
with the USB cable.
: Auto
Quality
: Auto
Exit
Print
Option Description
Images: Select whether to print the current photo or all
photos.
Size: Specify the size of the print.
Layout: Create thumbnail prints.
Type: Select the type of paper.
Quality: Set the printing quality.
Date: Set to print the date.
Turn on your camera.
5
6
•
The printer recognizes the camera automatically.
Press [ ] or [ ] to select a photo.
•
Press [ ] to set printing options.
See “Configuring print settings”.
File Name: Set to print the name of the file.
Press [ ] to print.
7
Reset: Reset the print options.
•
Printing starts. Press [ ] to cancel printing.
Some options are not supported by some printers.
Playback/Editing 75
Camera settings menu
Learn about various options to configure your camera's settings.
Select an option and save your settings.
Accessing the settings menu
3
4
Volume
Off
In Shooting or Playback mode, press [
].
1
2
Start Sound
Low
Shutter Sound
Medium
Select a menu.
Beep Sound
High
Volume
AF Sound
Start Sound
Shutter Sound
Beep Sound
AF Sound
Shooting
Sound
Back
Set
Display
Settings
Press [
] to return to the previous screen.
Exit
Change
Menu
Description
Sound: Set various camera sounds and the volume.
(p. 78)
Display: Customize the display settings, such as start
image and brightness. (p. 78)
Settings: Change the settings for the camera system,
such as memory format, default file name, and USB
mode. (p. 79)
Settings 77
Camera settings menu
Sound
Display
* Default
* Default
Item
Description
Item
Description
Display a brief description of an option or menu.
(Off, On*)
Function
Description
Adjust the volume of any sound.
(Off, Low, Medium*, High)
Volume
Set a start image to display when the camera turns
on.
• Off*: Display no start image.
Select the sound the camera emits when you turn
it on. (Off*, 1, 2, 3)
Start Sound
Shutter Sound
Beep Sound
AF Sound
Select the sound the camera emits when you
press the shutter button. (Off, 1*, 2, 3)
• Logo: Display a default image stored in the internal
memory.
Select the sound the camera emits when you
press buttons or switch modes. (Off, 1*, 2, 3)
• User Image: Display the image you want. (p. 62)
Start Image
• Only one user image will be saved in the
memory.
• If you select a new photo as a user image or
reset your camera, the current image will be
deleted.
Select the sound the camera emits when you
half-press the shutter button. (Off, On*)
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
Display
Brightness
Normal is fixed in Playback mode even if you have
selected Auto.
Set the duration for reviewing a captured image before
returning to the Shooting mode.
Quick View
(Off, 0.5 sec*, 1 sec, 3 sec)
Settings 78
Camera settings menu
* Default
Settings
Item
Description
If you perform no operations for 30 seconds, the
* Default
Item
Description
camera automatically switches to Power save mode
(press any button to deactivate the Power save
mode). (Off*, On)
Format the internal memory and the memory card.
Format deletes all files, including protected files.
(Yes, No)
Power Save
If the Power save mode is deactivated, the main
display will dim to save battery life when you perform no
operations for about 30 seconds.
Format
Reset
If you use a memory card used with cameras from
different manufacturers or a memory card reader, or
one formatted on a computer, your camera may read
the card incorrectly. Format the card before using it.
Reset menus and shooting options. Date and time,
language, and video output settings are not reset.
(Yes, No)
Language
Time Zone
Select a language for the display text.
Select a region and set the daylight-saving time (DST).
Date/Time
Set
Set the date and time.
Select a date format.
(YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, Off*)
Date Type
Settings 79
Camera settings menu
* Default
* Default
Item
Description
Specify how to name files.
Item
Description
Select whether to display the date and time on your
• Reset: Set the file number to start from 0001
when inserting a new memory card, formatting a
memory card, or deleting all files.
photos when printing. (Off*, Date, Date & Time)
• The date and time is displayed on the bottom-
right corner of the photo in yellow.
• Some printer models may not print the date
and time.
Imprint
• Series*: Set the file number to follow the previous
file number when inserting a new memory card,
formatting a memory card, or deleting all files.
• If you select Text in
mode, the camera will
not display the date and time.
• The default name of the first folder is 100PHOTO
and the default name of the first file is
SAM_0001.
• The file number increases one at a time from
SAM_0001 to SAM_9999.
Set the camera to turn off automatically when you are
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
File No.
• Your settings will not change after replacing
the battery.
• The camera will not automatically turn off when:
Auto Power
Off
• The folder number increases one at a time from
100PHOTO to 999PHOTO.
-
-
-
it is connected to a computer or printer
you are playing a slide show or videos
you are recording a voice memo
• The maximum number of files that can be stored
in one folder is 9999.
• The camera defines file names according to
the Digital rule for Camera File system (DCF)
standard. If you change the names of files
intentionally, the camera may not play back
the files.
Turn on an assistant light to help you focus in dark
places. (Off, On*)
AF Lamp
Video Out
Set the video signal output according to your region.
• NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico.
• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, Finland, Germany,
England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.
Settings 80
Camera settings menu
* Default
Item
USB
Description
Select the function to use when you connect the
camera to a computer or printer using a USB cable.
• Auto*: Set your camera to select a USB mode
automatically.
• Computer: Connect your camera to a computer
for transferring files.
• Printer: Connect your camera to a printer for
printing files.
Settings 81
Error messages
When the following error messages appear, try these remedies.
Error message
Card Error
Suggested remedies
• Turn off your camera, and then turn it on
again.
• Remove your memory card, and insert it
again.
• Format your memory card. (p. 79)
The inserted memory card is not compatible
with your camera. Insert a microSD, microSDHC
memory card.
Card not
supported.
File names do not match the DCF standard.
Transfer the files on the memory card to your
computer, and then format the card. (p. 79)
DCF Full Error
Delete the damaged file or contact a Samsung
service center.
File Error
Low Battery
Memory Full
Insert a charged battery or recharge the battery.
Delete unnecessary files or insert a new memory
card.
Take photos or insert a memory card that has
some photos.
No Image File
Appendixes 83
Camera maintenance
Camera body
Cleaning your camera
Wipe gently with a soft, dry cloth.
Camera lens and display
Use a blower brush to remove dust, and then wipe the lens
gently with a soft cloth. If any dust remains, apply lens cleaning
liquid to a piece of lens cleaning paper, and then wipe gently.
• Never use benzene, thinners, or alcohol to clean the device. These
solutions can damage the camera or cause it to malfunction.
• Do not press on the lens cover or use a blower brush on the lens
cover.
Appendixes 84
Camera maintenance
Using on beaches or shores
Using or storing the camera
• Protect your camera from sand and dirt when you use it on beaches
or in other similar areas.
Inappropriate places to use or store the camera
• Your camera is not waterproof. Do not handle the battery, adapter, or
memory card with wet hands. Operating the camera with wet hands
may cause damage to your camera.
• Avoid exposing the camera to very cold or very hot temperatures.
• Avoid using your camera in areas with extremly high humidity, or
where the humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in hot,
poorly-ventilated areas, such as in a car during summer time.
Storing for extended period of time
• Protect your camera and the display from impact, rough handling,
and excessive vibration to avoid serious damage.
• When you store the camera for an extended period, place it in a
sealed container with an absorbent material, such as silica gel.
• Avoid using or storing your camera in dusty, dirty, humid, or poorly-
ventilated areas to prevent damage to moving parts and internal
components.
• Remove the batteries from your camera when storing it for an
extended period. Installed batteries may leak or corrode over time
and cause serious damage to your camera.
• Do not use your camera near fuels, combustibles, or flammable
chemicals. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the camera or its
accessories.
• Over time, unused batteries will discharge and must be recharged
before use.
• Do not store the camera where there are mothballs.
Use the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm
one, condensation can form on the lens or internal components of
the camera. In this situation, turn off the camera and wait for at least 1
hour. If condensation forms on the memory card, remove the memory
card from the camera and wait until all moisture has evaporated before
reinserting it.
Appendixes 85
Camera maintenance
• Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to improper
use may not be covered by your warranty.
Other cautions
• Do not swing your camera by the strap. This may cause injury to
yourself or others or damage to your camera.
• Do not allow unqualified personnel to service the camera or attempt
to service the camera yourself. Any damage that results from
unqualified service is not covered by your warranty.
• Do not paint your camera, as paint can clog moving parts and
prevent proper operation.
• Turn off the camera while not in use.
• Your camera consists of delicate parts. Avoid impacts to the camera.
• Protect the display from external force by keeping it in the case when
not in use. Protect the camera from scratches by keeping it away
from sand, sharp implements, or loose change.
About memory cards
• Do not expose the lens to direct sunlight, as this may discolor the
image sensor or cause it to malfunction.
Supported memory cards
• Protect your lens from fingerprints and scratches. Clean your lens
with a soft, clean, debris-free lens cloth.
Your camera supports microSD (Secure Digital) or microSDHC (Secure
Digital High Capacity) memory cards.
• The camera may turn off if impacted from the outside. This is to
protect the memory card. Turn on the camera to use it again.
To read data with a PC or memory card reader, insert
the memory card into a memory card adapter.
• While you use the camera, it may heat up. This is normal and should
not affect your camera’s lifespan or performance.
• When you use the camera in low temperatures, it may take some
time to turn on, the color may be changed temporarily, or after-
images may appear. These conditions are not malfunctions and
they will correct themselves when the camera is returned to normal
temperatures.
• Paint or metal on the outside of the camera may cause allergies,
itchy skin, eczema, or swelling for people with sensitive skin. If
you experience any of these symptoms, stop using the camera
immediately and consult a doctor.
Appendixes 86
Camera maintenance
Cautions when using memory cards
Memory card capacity
• Insert a memory card in the correct direction. Inserting a memory
card in the wrong direction may damage your camera and memory
card.
The memory capacity may differ depending on the scenes you
shoot or the shooting conditions. These capacities are based on
a 1 GB microSD card:
• Do not use memory cards that have been formatted by other
cameras or by a computer. Reformat the memory card with your
camera.
Super
Fine
Size
Fine Normal 60 FPS 30 FPS 24 FPS 15 FPS
• Turn off the camera when you insert or remove the memory card.
138
272
315
318
374
465
714
401
464
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
• Do not remove the memory card or turn off your camera while the
lamp is blinking, as this may damage your data.
160
162
191
239
373
851
468
P
h
o
t
• When the lifespan of a memory card has expired, you cannot store
any more photos on the card. Use a new memory card.
549
678
• Do not bend, drop, or subject memory cards with heavy impact or
pressure.
o
s
1,025
• Avoid using or storing memory cards near strong magnetic fields.
1,539 2,108
• Avoid using or keeping memory cards in areas with high
temperature, high humidity, or corrosive substances.
1,913 3,091 3,889
Approx. Approx.
05’ 32’’ 08’ 49’’
• Prevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a soft
cloth before you insert the memory card in your camera.
-
-
-
-
-
-
-
-
-
-
-
-
*
V
i
Approx.
13’ 10’’
Approx.
25’ 52’’
d
e
o
s
-
• Do not allow liquids, dirt, or foreign substances to come in contact
with memory cards or the memory card slot. Doing so may cause
memory cards or the camera to malfunction.
Approx. Approx.
13’ 50’’ 27’ 10’’
Approx.
52’ 20’’
-
• When you carry a memory card, use a case to protect the card from
* Available recording time may vary if you use the zoom.
electrostatic discharges.
Several videos were recorded in succession to determine the total
recording time.
Appendixes 87
Camera maintenance
• Transfer important data to other media, such as a hard disk, CD, or
DVD.
Battery life
Average shooting time /
Number of photos
Shooting conditions
(when the battery was fully charged)
• When you use the camera for an extended period, the memory
card may become warm. This is normal and does not indicate a
malfunction.
The battery life was measured under the
following conditions: in the
mode,
14M resolution, and Fine quality.
The manufacturer is not responsible for any loss of data.
Test Procedure:
1. Set the flash option to Off, take a
single shot, and zoom in or out.
Approximately
90 min /
Approximately
180
Photos
2. Set the flash option to Fill in, take a
single shot, and zoom in or out.
About the battery
Use only Samsung-approved batteries.
3. Perform steps 1 and 2 for 30
seconds and repeat for 5 minutes.
Then turn off the camera for
1 minute.
Battery specifications
Specification
Model
Description
4. Repeat steps 1 to 3.
BP70A
Approximately
Videos
Record videos at 1280 X 720 HQ
resolution and 24 FPS.
Type
Lithium-ion battery
740 mAh (Minimum 700 mAh)
3.7 V
60 min
Cell capacity
Voltage
• The figures above are based on Samsung’s standards. Your results may differ
depending on your actual usage.
• Several videos were recorded in succession to determine the total recording
time.
Charging time*
(when the camera is switched off)
Approximately 150 min
*
Charging the battery by connecting it to a computer may take longer.
Appendixes 88
Camera maintenance
Low battery message
Cautions about using the battery
When the battery charge has fully discharged, the battery icon will turn
red and the ‘Low Battery’ message will appear.
Protect batteries, chargers, and memory cards from damage
Prevent batteries from making contact with metal objects, as this can
create a connection between the + and – terminals of your battery and
lead to temporary or permanent battery damage and may cause a fire
or electric shock.
Notes about using the battery
• Avoid exposing batteries or memory cards to very cold or very hot
temperatures (below 0º C/32º F or above 40º C/104º F). Extreme
temperatures can reduce the charging capacity of your batteries and
can cause memory cards to malfunction.
Notes about charging the battery
• If the indicator light is off, make sure that the battery is inserted
correctly.
• When you use the camera for an extended period, the area around
the battery chamber may become warm. This does not affect the
normal use of the camera.
• If the camera is on while charging, the battery may not fully charge.
Turn off the camera before charging the battery.
• Do not pull the power supply cord to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.
• Do not use your camera when you charge the battery. This may
cause a fire or electric shock.
• In temperatures below 0 ºC, battery capacity and battery life may
decrease.
• Do not pull the power supply cord to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.
• Battery capacity may decrease in low temperatures but will return to
normal in milder temperatures.
• Wait to turn on the camera until after the battery has charged for at
least 10 minutes.
• If you connect the camera to an external power source while the
battery is depleted, using some high energy-consuming functions will
cause the camera to turn off. To use the camera normally, recharge
the battery.
• The battery cannot be recharged when the temperature is below
0 ºC or above 40 ºC.
Appendixes 89
Camera maintenance
• Using the flash or recording videos depletes the battery quickly.
Charge the battery until the indicator light turns green.
Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations when
you dispose of used batteries.
• If the indicator light blinks in orange or does not illuminate, reconnect
the cable, or remove the battery and insert it again.
• Never place batteries or cameras on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may explode when
they are overheated.
• If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange. Charging
will start when the battery cools down.
• Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so may
damage the cable.
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your
computer
- the USB port of your computer does not support the power output
standard (5V, 500mA)
Appendixes 90
Camera maintenance
• Do not disassemble or puncture the battery with any
sharp object.
Personal injury or death can occur if the battery is
handled carelessly or improperly. For your safety,
follow these instructions for proper battery handling:
• The battery can ignite or explode if not handled
properly. If you notice any deformities, cracks, or other
abnormalities in the battery, immediately discontinue use
of the battery and contact a service center.
• Avoid exposing the battery to high pressure or crushing
forces.
• Avoid exposing the battery to major impacts, such as
dropping it from high places.
• Do not expose the battery to temperatures of 60 °C
• Use only authentic, manufacturer-recommend battery
chargers and adapters and charge the battery only by
the methods described in this user manual.
(140° F) or above.
• Do not allow the battery to come in contact with moisture
or liquids.
• Do not place the battery near heating devices or expose
it to excessively warm environments, such as the inside
of an enclosed car in the summertime.
• Do not expose the battery to direct sunlight, fire, or any
other source of excessive heat.
• Do not place the battery in a microwave oven.
Disposal guidelines
• Avoid storing or using the battery in hot, humid places,
• Dispose of the battery with care.
such as spas or shower enclosures.
• Do not dispose of the battery in a fire.
• Do not rest the device on flammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged
period.
• Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and
federal regulations.
• When the device is switched on, do not leave it in any
confined space for a prolonged period.
Guidelines for charging the battery
Charge the battery only by the method described in this
user manual. The battery can ignite or explode if not
charged properly.
• Do not allow the battery terminals to come in contact
with metallic objects, such as necklaces, coins, keys,
or watches.
• Use only authentic, manufacturer-recommended,
Lithium-ion replacement batteries.
Appendixes 91
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted
the troubleshooting solution and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation
Suggested remedies
Situation
Suggested remedies
• There is no space on the memory card.
Delete unnecessary files or insert a new
card.
• Make sure that the battery is inserted.
Cannot turn on the
camera
• Make sure that the battery is inserted
correctly.
• Format the memory card. (p. 79)
• Charge the battery.
• The memory card is defective. Get a
new memory card.
• Charge the battery.
Cannot take photos
• Your camera may be in Power save
mode. (p. 79)
• Make sure that the camera is switched
on.
The power turns off
suddenly
• The camera may turn off to prevent the
memory card from being damaged due
to an impact. Turn on your camera again.
• Charge the battery.
• Make sure that the battery is inserted
correctly.
• The battery may lose power more quickly
in low temperatures (below 0° C). Keep
the battery warm by putting it into your
pocket.
The camera freezes
The camera heats up
Remove the battery and insert it again.
While you use the camera, it may heat up.
This is normal and should not affect your
camera’s lifespan or performance.
The camera is losing
battery power quickly
• Using the flash or recording videos
depletes the battery quickly. Recharge
if needed.
• The flash option may be set to Off.
(p. 38)
The flash does not work
• Batteries are consumable parts that must
be replaced over time. Get a new battery
if the battery life is diminishing quickly.
• You cannot use the flash in some
modes.
The flash fires
unexpectedly
The flash may fire due to static electricity.
This is not a malfunction.
Appendixes 92
Before contacting a service center
Situation
Suggested remedies
Situation
Suggested remedies
The date and time are
incorrect
Set the date and time in the display settings
menu. (p. 79)
An incorrect white balance can create
unrealistic color. Select the proper white
balance option to suit the light source.
(p. 47)
The colors in the photo
do not match the actual
scene
The display or buttons
do not work
Remove the battery and insert it again.
• Turn off the flash. (p. 38)
If you use your camera at low temperatures,
it can cause the camera screen to
malfunction or discolor.
For better performance of your camera
screen, use your camera at normal
temperatures.
The photo is too bright
The photo is too dark
• Your photo is overexposed. Adjust the
exposure value. (p. 46)
The camera screen
works poorly
Your photo is underexposed.
• Turn on the flash. (p. 38)
• Adjust the ISO speed. (p. 39)
The memory card has
an error
The memory card has not been reset.
Format the card. (p. 79)
• Adjust the exposure value. (p. 46)
• Make sure that the camera is correctly
If you change the name of a file, your
camera may not play the file. (Note: File
names should meet the DCF standard.) If
you encounter this situation, play back the
files on your computer.
connected to the TV with the A/V cable.
The TV does not
display your photos
• Make sure that your memory card
contains photos.
Cannot play back files
• Make sure that the USB cable is
connected correctly.
• Make sure that the focus option you set
is suitable for close-up shots. (p. 40)
Your computer does
not recognize your
camera
• Make sure that your camera is switched
on.
• Make sure that the lens is clean. If not,
clean the lens. (p. 84)
The photo is blurry
• Make sure that you are using a
supported operating system. (p. 68, 74)
• Make sure that the subject is within
range of the flash. (p. 95)
The file transmission may be interrupted by
static electricity. Disconnect the USB cable
and connect it again.
Your computer
disconnects the camera
while transferring files
Appendixes 93
Before contacting a service center
Situation
Suggested remedies
• Depending on the video player programs
installed on your PC, video files captured
by your camera may not play. To ensure
the video files play on your computer,
install and use the Intelli-studio. (p. 71)
Your computer cannot
play videos
• Make sure that the USB cable is
connected correctly.
• End Intelli-studio and restart the program.
• You cannot use Intelli-studio on
Macintosh computers.
•
Depending on your computer's
specification and environments, the
program may not launch automatically.
In this case, click Start → My Computer
→ Intelli-studio → iStudio.exe on your
computer.
Intelli-studio is not
functioning properly
Appendixes 94
Camera specifications
Image sensor
Shutter speed
Type
1/2.3" (Approx. 7.76 mm) CCD
Approx. 14.22 mega-pixels
Approx. 14.54 mega-pixels
•
•
•
•
Smart Auto: 1/8 - 1/2,000 sec.
Program: 1 - 1/2,000 sec.
Night: 8 - 1/2,000 sec.
Fireworks: 2 sec.
Effective pixels
Total pixels
Lens
Exposure
Control
Samsung 5X Zoom Lens f = 4.9 - 24.5 mm
(35 mm film equivalent: 27 - 135 mm)
Program AE
Focal length
F-stop range
Digital zoom
Metering
Multi, Spot, Center-weighted, Face Detection AE
±2EV (1/3EV steps)
F3.5 (W) - F5.9 (T)
Compensation
•
•
Still image mode: 1.0X - 3.0X
Auto, 80, 100, 200, 400, 800, 1600,
3200(Up to 5M Size)
Play mode: 1.0X - 13.5X (depending on image size)
ISO equivalent
Display
Type
Flash
TFT LCD
Mode
Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix
Feature
Focusing
2.7" (6.9 cm), 230 K
•
•
WIDE: 0.4 m - 3.5 m (ISO Auto)
TELE: 0.5 m - 2.0 m (ISO Auto)
Range
TTL auto focus (Multi AF, Center AF, Face Detection AF,
Object Tracking AF)
Recharging time
Approx. 4 sec. (depending on battery condition)
Type
Shake reduction
Tele (T)
Wide (W)
Digital Image Stabilization (DIS)
Normal
Macro
100 cm - infinity
100 cm - 150 cm
100 cm - infinity
80 cm - infinity
5 cm - 80 cm
5 cm - infinity
Range
Auto Macro
Appendixes 95
Camera specifications
Effect
•
•
Format: AVI (MJPEG)
Size: 1280 X 720 HQ (Per one file: Max. 2GB),
640 X 480, 320 X 240
•
Photo Style Selector: Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Custom RGB
•
Frame Rate: 60fps (320 X 240 Only), 30 fps,
24 fps (1280 X 720 HQ Only), 15 fps
Shooting mode
•
•
Smart Filter: Normal, Miniature, Vignetting, Fish Eye,
Sketch, Defog
Videos
•
•
Voice: On/Off/Zoom Mute
Image Adjust: Sharpness, Contrast, Saturation
Video editing (embedded):
Movie Stabilization, Pause during recording,
Still image capture, Time trimming
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom Set
Playback
Type
Date Imprinting
Off, Date, Date & Time
Shooting
Single image, Thumbnails, Multi Slide Show with
Music and Effect, Movie clip, Smart Album*
* Smart Album category: Type, Date, Color, Week
Edit
Resize, Rotate, Photo Style Selector, Image Adjust
•
Modes: Smart Auto (White, Macro Color, Portrait,
Night Portrait, Backlight Portrait, Backlight,
Landscape, Action, Tripod, Night, Macro, Macro
Text, Blue Sky, Sunset, Natural Green), Program,
DIS, Scene (Beauty Shot, Frame Guide, Night,
Portrait, Children, Landscape, Close Up, Text,
Sunset, Dawn, Backlight, Fireworks, Beach &
Snow)
•
•
•
Photo Style Selector: Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Custom RGB
Smart Filter: Normal, Miniature, Vignetting, Fish Eye,
Sketch, Defog
Effect
Photos
Image Adjust: ACB, Red-eye Fix, Face Retouch,
Brightness, Contrast, Saturation, Add Noise
•
•
Drive: Single, Continuous, Motion Capture, AEB
Timer: Off, 10 Sec, 2 Sec, Double
Appendixes 96
Camera specifications
Voice recording
For 1GB microSD
•
•
Voice Recording (Max 10 hours)
Super Fine
138
Fine
272
315
318
Normal
401
Voice Memo in a photo (Max. 10 sec.)
4320 X 3240
4224 X 2816
4000 X 3000
4224 X 2376
3264 X 2448
2592 X 1944
1920 X 1080
Storage
160
464
•
•
Internal memory: Approx. 19 MB
External memory (Optional):
162
468
191
239
373
851
374
465
549
678
- microSD card (up to 2 GB guaranteed)
- microSDHC card (up to 8 GB guaranteed)
Internal memory capacity may not match these
specifications.
Media
Image size
714
1,025
2,108
1,539
•
Photo: JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
1024 X 768
1,913
3,091
3,889
File format
•
•
Video: AVI (MJPEG)
Audio: PCM
These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Interface
Digital output
connector
USB 2.0
Audio output
Video output
Mono (Internal speaker), Mono (Microphone)
NTSC, PAL (selectable)
DC power input
connector
4.2 V
Appendixes 97
Camera specifications
Power source
Rechargeable
battery
Lithium-ion battery (BP70A)
(740 mAh, Minimum 700 mAh)
Connector Type
20 pin (USB/AV out)
The power source may differ depending on your region.
Dimensions (W x H x D)
92.4 × 55.6 × 17.0 mm (excluding protrusions)
Weight
110 g (without battery and memory card)
Operating temperature
0 - 40˚C
Operating humidity
5 - 85 %
Software
Intelli-studio
Specifications are subject to change without prior notice.
Appendixes 98
Glossary
ACB (Auto Contrast Balance)
DCF (Design rule for Camera File system)
This feature automatically improves the contrast of your images when
the subject is backlit or when there is a high contrast between your
subject and the background.
A specification to define a file format and file system for digital cameras
created by the Japan Electronics and Information Technology Industries
Association (JEITA).
AEB (Auto Exposure Bracket)
Depth of field
This feature automatically captures several images at different
exposures to help you capture a properly-exposed image.
The distance between the nearest and farthest points that can be
acceptably focused in a photograph. Depth of field varies with lens
aperture, focal length, and distance from the camera to the subject.
Selecting a smaller aperture, for example, will increase the depth of field
and blur the background of a composition.
AF (Auto Focus)
A system that automatically focuses the camera lens on the subject.
Your camera uses the contrast to focus automatically.
Digital zoom
A feature that artificially increases the amount of zoom available with
zoom lens (optical zoom). When using the digital zoom, the image
quality will deteriorate as the magnification increases.
Aperture
The aperture controls the amount of light that reaches the camera’s
sensor.
DPOF (Digital Print Order Format)
Camera shake (Blur)
A format for writing printing information, such as selected images
and number of prints, on a memory card. DPOF-compatible printers,
sometimes available at photo shops, can read the information from the
card for convenient printing.
If the camera is moved while the shutter is open, the entire image may
appear blurred. This occurs more often when the shutter speed is slow.
Prevent camera shake by raising the sensitivity, using the flash, or using
a faster shutter speed. Alternately, use a tripod, the DIS function to
stabilize the camera.
EV (Exposure Value)
All the combinations of the camera’s shutter speed and lens aperture
that result in the same exposure.
Composition
Composition in photography means arranging objects in a photo.
Usually, abiding by the rule of thirds leads to a good composition.
Appendixes 99
Glossary
EV Compensation
Image sensor
This feature allows you to quickly adjust the exposure value measured
by the camera, in limited increments, to improve the exposure of your
photos. Set the EV compensation to -1.0 EV to adjust the value one
step darker and 1.0 EV to one step brighter.
The physical part of a digital camera that contains a photosite for each
pixel in the image. Each photosite records the brightness of the light
that strikes it during an exposure. Common sensor types are CCD
(Charge-coupled Device) and CMOS (Complementary Metal Oxide
Semiconductor).
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras created
by the Japan Electronic Industries Development Association (JEIDA).
ISO sensitivity
The sensitivity of the camera to light, based on the equivalent film
speed used in a film camera. At higher ISO sensitivity settings, the
camera uses a higher shutter speed, which can reduce blur caused by
camera shake and low light. However, images with high sensitivity are
more susceptible to noise.
Exposure
The amount of light allowed to reach the camera’s sensor. Exposure is
controlled by a combination of the shutter speed, the aperture value,
and ISO sensitivity.
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images are
compressed to reduce their overall file size with minimal deterioration of
the image resolution.
Flash
A speed light that helps to create adequate exposure in low-light
conditions.
LCD (Liquid Crystal Display)
Focal length
A visual display commonly used in consumer electronics. This display
needs a separate backlight, such as CCFL or LED, to reproduce
colors.
The distance from the middle of the lens to its focal point (in
millimeters). Longer focal lengths result in narrower angles of view and
the subject is magnified. Shorter focal lengths result in wider angles of
view.
Macro
This feature allows you to capture close-up photos of very small
objects. When using the macro feature, the camera can maintain a
sharp focus on small objects at a near life-size ratio (1:1).
Appendixes 100
Glossary
Metering
Shutter speed
The metering refers to the way in which the camera measures the
quantity of light to set the exposure.
Shutter speed refers to the amount of time it takes to open and close
the shutter, and it is an important factor in the brightness of a photo, as
it controls the amount of light which pass through the aperture before it
reaches the image sensor. A fast shutter speed allows less time to let
light in and the photo becomes darker and more easily freezes subjects
in motion.
MJPEG (Motion JPEG)
A video format which is compressed as a JPEG image.
Noise
Vignetting
Misinterpreted pixels in a digital image that may appear as misplaced
or random, bright pixels. Noise usually occurs when photos are shot
with a high sensitivity or when a sensitivity is automatically set in a dark
place.
A reduction of an image’s brightness or saturation at the periphery
(outer edges) compared to the center of the image. Vignetting can draw
interest to subjects positioned in the center of an image.
White balance (color balance)
Optical zoom
An adjustment of the intensities of colors (typically the primary colors
red, green, and blue), in an image. The goal of adjusting the white
balance, or color balance, is to correctly render the colors in an image.
This is a general zoom which can enlarge images with a lens and does
not deteriorate quality of images.
Quality
An expression of the rate of compression used in a digital image.
Higher quality images have a lower rate of compression, which usually
results in a larger file size.
Resolution
The number of pixels present in a digital image. High resolution images
contain more pixels and typically show more detail than low resolution
images.
Appendixes 101
Correct Disposal of This Product
Correct disposal of batteries in this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate battery return systems)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should
not be mixed with other commercial wastes for disposal.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
This Class [B] digital apparatus complies with Canadian
ICES-003.
PlanetFirst represents Samsung Electronics’
commitment to the sustainable development and
social responsibility through eco-driven business and
management activities.
Appendixes 102
FCC notice
• Declaration of Conformity
• NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Trade Name
Model No.
: Samsung Electronics America, Inc.
: Samsung ST65
Responsible Party
Address
: Samsung Electronics America, Inc.
: 85 Challenger Road, Ridgefield Park,
NJ 07660
Telephone No.
: 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for
help.
• CAUTION:
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Appendixes 103
Index
G
L
Q
Glossary 99
Light source (White balance)
N
H
R
Half-pressing 6
Recording
M
Macro 40
Maintenance 84
I
P
Red-eye
Icons 18
Memory card
Image adjust
Photo styles
Reset 79
Resizing 62
Pictbridge 75
Resolution
Metering
Center-weighted 47
RGB tone
Imprint 80
Intelli-studio 71
Muting
Rotating 62
Appendixes 105
Please refer to the warranty that came with your product or visit our
website http://www.samsung.com/ for after-sales service or inquiries.
|
