Samsung SC D352 User Manual

ENGLISH  
Digital Video Camcorder  
SC-D351/D352/D353/D354/D355  
AF  
Auto Focus  
CCD Charge Coupled Device  
LCD Liquid Crystal Display  
Owner’s Instruction Book  
Before operating the unit, please read this  
Instruction Book thoroughly, and retain it for  
future reference.  
US PATENT 4415844  
ENGLISH  
Notices and Safety Instructions  
Safety Instructions  
This symbol is intended to alert the user to the presence of uninsulated  
dangerous voltage within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of fire or electric shock.  
CAUTION  
RISK OF ELECTRIC  
SHOCK  
DO NOT OPEN  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER(OR BACK). NO USER SERVICEABLE  
PARTS INSIDE, REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
This symbol is intended to alert the user to the presence of important  
operating and maintenance instructions in the literature accompanying  
this product.  
To prevent electric shock, match wide blade of plug  
to wide slot and fully insert.  
1. READ INSTRUCTIONS:  
7. WATER AND MOISTURE:  
All the safety and operating instructions should be read  
before the CAMCORDER is operated.  
Do not use this CAMCORDER near water;  
for example, near a bathtub, wash bowl, kitchen sink, laundry  
tub, in a wet basement, near a swimming pool or lake.  
2. RETAIN INSTRUCTIONS:  
The safety and operating instructions should be retained for  
future reference.  
8. ACCESSORIES:  
Do not place this CAMCORDER on an unstable cart, stand, tripod,  
bracket or table. The CAMCORDER may fall, causing serious injury  
to a child or adult, and serious damage to the unit.  
3. HEED WARNINGS:  
All warnings on the CAMCORDER and in the operating instructions  
should be adhered to.  
Use only with a cart, stand, tripod, bracket, or table recommended  
by the manufacturer or sold with the CAMCORDER. Any mounting  
of the unit should follow the manufacturer’s instructions and should  
use a mounting accessory recommended by the manufacturer.  
4. FOLLOW INSTRUCTIONS:  
All operating and maintenance instructions should be followed.  
A. An appliance and cart combination should be moved with care.  
Quick stops, excessive force and uneven surfaces may cause  
the appliance and cart combination to overturn.  
PORTABLE CART WARNING  
5. CLEANING:  
Unplug this CAMCORDER from the wall outlet before cleaning.  
Do not use liquid or aerosol cleaners.  
Use a dry cloth used for dusting cabinets.  
(Symbol provided by RETAC)  
6. ATTACHMENTS:  
Do not use attachments not recommended by the CAMCORDER  
product manufacturer as they may be hazardous.  
ENGLISH  
Notices and Safety Instructions  
9. VENTILATION:  
13. OUTDOOR ANTENNA GROUNDING:  
Slots and openings in the cabinet are provided for ventilation to  
ensure reliable operation of the CAMCORDER and to protect it  
from overheating. These openings must not be blocked or  
covered. Never place your CAMCORDER on a bed, sofa, rug,  
or other similar surface: on or near a radiator or heat register.  
This CAMCORDER should not be placed in a built-in installation  
such as a bookcase or rack unless proper ventilation is provided  
or the manufacturer’s instructions have been adhered to.  
If an outside antenna or cable system is connected to the  
CAMCORDER, be sure the antenna or cable system is grounded  
to provide some protection against voltage surges and built-up  
static charges, Section 810 of the National Electrical Code,  
ANSI/NFPA No. 70-1984, provides information with respect to  
proper grounding of the mast and supporting structure, grounding  
of the lead-in wire and supporting structure, grounding of the mast  
and supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding to conductors, location  
of antenna-discharge unit, connection to grounding electrodes  
and requirements for the grounding electrode.  
10. POWER SOURCES:  
The CAMCORDER should be operated only from the type of  
power source indicated on the label.  
See figure below.  
If you are not sure of the type of power supply at your home,  
consult your appliance dealer or local power company.  
A CAMCORDER is intended to be operated from battery power,  
or other sources, refer to the operating instructions.  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
11. GROUNDING OR POLARIZATION:  
This CAMCORDER may be equipped with either a polarized  
2-wire AC line plug (a plug having one blade wider than the other)  
or a 3-wire grounding type plug, a plug having a third (grounding)  
pin.  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
GROUNDING CONDUCTORS  
EQUIPMENT  
(NEC SECTION 810-21)  
GROUND CLAMPS  
If you are unable to insert the plug fully into the outlet, try reversing  
the plug. If the plug still fails to fit, contact your electrician to  
replace your outlet. Do not defeat the safety purpose of the  
polarized plug.  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC NATIONAL ELECTRICAL CODE  
12. POWER-CORD PROTECTION:  
Power-supply cords should be routed so that they are not likely to  
be walked on or pinched by items placed upon or against them,  
paying particular attention to cords or plugs, convenient  
receptacles, and the point where they exit from the unit.  
ENGLISH  
Notices and Safety Instructions  
14. LIGHTNING:  
19. DAMAGE REQUIRING SERVICE:  
For added protection of this CAMCORDER during a lightning  
storm or when it is left unattended and unused for long periods of  
time, unplug it from the wall outlet and disconnect the antenna or  
cable system.  
This will prevent damage to the CAMCORDER due to lightning  
and power-line surges.  
Unplug this CAMCORDER from the wall outlet and refer servicing  
to qualified service personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If any liquid has been spilled onto, or objects have fallen into  
the CAMCORDER.  
c. If the CAMCORDER has been exposed to rain or water.  
d. If the CAMCORDER does not operate normally by following the  
operating instructions, adjust only those controls that are  
covered by the operating instructions. Improper adjustment of  
other controls may result in damage and will  
15. POWER LINES:  
An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits where  
it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with them  
might be fatal.  
often require extensive work by a qualified technician to restore  
the CAMCORDER to its normal operation.  
e. If the CAMCORDER has been dropped or the cabinet has been  
damaged.  
f. When the CAMCORDER exhibits a distinct change in  
performance, this indicates a need for service.  
16. OVERLOADING:  
Do not overload wall outlets and extension cords as this can result  
in a risk of fire or electric shock.  
20. REPLACEMENT PARTS:  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer and having the same characteristics as the original  
part.  
Unauthorized substitutions may result in fire, electric shock or  
other hazards.  
17. OBJECTS AND LIQUIDS:  
Never push objects of any kind into this CAMCORDER through  
openings as they may touch dangerous voltage points or short out  
a part that could result in a fire or electric shock.  
Never spill liquids of any kind onto the CAMCORDER. Should  
spillage occur, unplug unit and have it checked by a technician  
before use.  
21. SAFETY CHECK:  
Upon completion of any service or repairs to this CAMCORDER,  
ask the service technician to perform safety checks to determine  
that the CAMCORDER is in safe operating order.  
18. SERVICING:  
Do not attempt to service this CAMCORDER yourself. Opening or  
removing covers may expose you to dangerous voltage or other  
hazards.  
Refer all servicing to qualified service personnel.  
ENGLISH  
Notices and Safety Instructions  
22. To prevent damage which may result in fire or shock hazard,  
NOTE: This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
do not expose this appliance to rain or moisture.  
23. If this power supply is used at 240V ac, a suitable plug adapter  
should be used.  
NOTE TO CATV SYSTEM INSTALLER:  
This reminder is provided to call the CATV system installer’s attention  
to Article 820-40 of the NEC that provides guidelines for proper  
grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building as close to the point  
of cable entry as practical.  
- Reorient or relocate the receiving antenna.  
USER INSTALLER CAUTION:  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help  
and for additional suggestions.  
The user may find the following booklet prepared by the Federal  
Communications Commission helpful : “How to Identify and  
Resolve Radio-TV Interference Problems.”  
This Booklet is available from the U.S. Government Printing  
Office, Washington, D.C. 20402, Stock No. 004-000-00345-4.  
Your authority to operate this FCC certified equipment could be voided  
if you make changes or modifications not expressly approved by this  
party responsible for compliance to part 15 FCC rules.  
NOTE:  
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN  
MERCURY AND MUST BE RECYCLED OR  
DISPOSED OF ACCORDING  
TO LOCAL, STATE OR FEDERAL LAWS For details  
see lamprecycle.org, eiae.org, or call 1-800-Samsung  
FCC Warning  
The user is cautioned that changes or modifications not expressly  
approved by the manufacturer could void the user’s authority to  
operate the equipment.  
FCC ID : A3L05DRAGON  
This device complies with Part 15 of FCC Rules.  
Operation is subject to the following two conditions;  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired operation.  
ENGLISH  
Contents  
Basic Recording ........................................................................................................................................................... 35  
Using the Viewfinder ..................................................................................................................................................................................................................35  
Adjusting the Focus..............................................................................................................................................................................................................35  
Inserting and Ejecting a Cassette..............................................................................................................................................................................................36  
Hints for Stable Image Recording..............................................................................................................................................................................................37  
Recording with the LCD Screen ..........................................................................................................................................................................................37  
Recording with the Viewfinder..............................................................................................................................................................................................37  
Various Recording Techniques...................................................................................................................................................................................................38  
Making your First Recording......................................................................................................................................................................................................39  
Using EASY.Q Mode (for Beginners).........................................................................................................................................................................................40  
Record Search (REC SEARCH)..........................................................................................................................................................................................41  
Setting the Zero Memory (SC-D354/D355 only) .......................................................................................................................................................................42  
Self Record using the Remote Control (SC-D354/D355 only)..................................................................................................................................................43  
Zooming In and Out ...................................................................................................................................................................................................................44  
Using the Tele Macro..................................................................................................................................................................................................................44  
Using the Fade In and Out.........................................................................................................................................................................................................45  
To Start Recording................................................................................................................................................................................................................45  
To Stop Recording (use Fade In/Fade Out) ........................................................................................................................................................................45  
Using Back Light Compensation Mode (BLC)...........................................................................................................................................................................46  
Using the Color Nite Shutter ......................................................................................................................................................................................................47  
Using the Color Nite Shutter with LED Light (SC-D352/D354/D355 only) ...............................................................................................................................48  
Nite Pix (0 lux recording) (SC-D352/D354/D355 only)..............................................................................................................................................................49  
Power Nite Pix (SC-D352/D354/D355 only)..............................................................................................................................................................................50  
Advanced Recording.................................................................................................................................................... 51  
Use of various Functions............................................................................................................................................................................................................51  
Setting Menu Items ..............................................................................................................................................................................................................51  
Function availability in each Mode.......................................................................................................................................................................................53  
Selecting the Record Mode........................................................................................................................................................................................................54  
Selecting Audio Mode.................................................................................................................................................................................................................55  
Cutting Off Wind Noise (Wind Cut)............................................................................................................................................................................................56  
Setting the Shutter Speed & Exposure......................................................................................................................................................................................57  
Recommended Shutter Speeds when Recording...............................................................................................................................................................57  
Auto Focus/Manual Focus .........................................................................................................................................................................................................58  
Auto Focusing.......................................................................................................................................................................................................................58  
Manual Focusing ..................................................................................................................................................................................................................58  
Setting the White Balance..........................................................................................................................................................................................................59  
Using Quick Menu: White Balance ......................................................................................................................................................................................60  
Setting the Digital Image Stabilizer (DIS) ..................................................................................................................................................................................61  
Using Quick Menu: Digital Image Stabilizer (DIS)...............................................................................................................................................................62  
Programmed Automatic Exposure Modes (Program AE)..........................................................................................................................................................63  
Setting the Program AE........................................................................................................................................................................................................64  
Using Quick Menu: Program AE..........................................................................................................................................................................................64  
3
ENGLISH  
Contents  
Applying Digital Effects...............................................................................................................................................................................................................65  
Selecting the Digital Effects .................................................................................................................................................................................................66  
Zooming In and Out with Digital Zoom......................................................................................................................................................................................67  
Setting the Digital Zoom.......................................................................................................................................................................................................67  
Photo Image Recording .............................................................................................................................................................................................................68  
Searching for a Photo Image ...............................................................................................................................................................................................68  
Playback ....................................................................................................................................................................... 69  
Playing Back a Tape You have recorded on the LCD Screen ..................................................................................................................................................69  
Adjusting the LCD Bright/Color during Playback.................................................................................................................................................................69  
Controlling Sound from the Speaker..........................................................................................................................................................................................70  
Tape Playback ............................................................................................................................................................................................................................71  
Playback on the LCD Screen...............................................................................................................................................................................................71  
Playback on a TV Monitor....................................................................................................................................................................................................71  
Connecting to a TV which has Audio/Video Input Jacks.....................................................................................................................................................71  
Connecting to a TV which has no Audio and Video Input Jacks ........................................................................................................................................72  
Playback ...............................................................................................................................................................................................................................72  
Various Functions while in Player Mode....................................................................................................................................................................................73  
Playback Pause....................................................................................................................................................................................................................73  
Picture Search (Forward/Reverse) ......................................................................................................................................................................................73  
Slow Playback (Forward/Reverse) (SC-D354/D355 only) ..................................................................................................................................................73  
Frame Advance (To play back frame by frame) (SC-D354/D355 only)..............................................................................................................................74  
X2 Playback (Forward/Reverse) (SC-D354/D355 only)......................................................................................................................................................74  
Reverse Playback (SC-D354/D355 only) ............................................................................................................................................................................74  
Zooming during Playback (PB ZOOM)......................................................................................................................................................................................75  
AV In/Out (SC-D355 only)..........................................................................................................................................................................................................76  
Audio Dubbing (SC-D354/D355 only)........................................................................................................................................................................................77  
Dubbing Sound.....................................................................................................................................................................................................................77  
Dubbed Audio Playback.............................................................................................................................................................................................................78  
IEEE 1394 Data Transfer.............................................................................................................................................. 79  
USB Interface (SC-D352/D353/D354/D355 only).................................................................................................... 81  
Digital Still Camera Mode (SC-D353/D354/D355 only)........................................................................................... 87  
Memory Stick (Optional Accessory)...........................................................................................................................................................................................87  
Memory Stick Functions.......................................................................................................................................................................................................87  
Inserting and Ejecting the Memory Card .............................................................................................................................................................................88  
Structure of Folders and Files on the Memory Card...........................................................................................................................................................89  
Image Format .......................................................................................................................................................................................................................89  
Selecting the Camcorder Mode .................................................................................................................................................................................................89  
Selecting the Built-in Memory (SC-D354/D355 only)................................................................................................................................................................90  
Using Quick Menu: Memory Type........................................................................................................................................................................................90  
4
ENGLISH  
Contents  
Selecting the Image Quality.......................................................................................................................................................................................................91  
Select the Image Quality......................................................................................................................................................................................................91  
Number of Images on the Memory Card.............................................................................................................................................................................91  
Using Quick Menu: Photo Quality........................................................................................................................................................................................92  
Memory File Number..................................................................................................................................................................................................................93  
Taking Photos.............................................................................................................................................................................................................................94  
Viewing Still Images ...................................................................................................................................................................................................................95  
To view a Single Image........................................................................................................................................................................................................95  
To view a Slide Show ...........................................................................................................................................................................................................95  
To view the Multi Display......................................................................................................................................................................................................96  
Protection from accidental Erasure............................................................................................................................................................................................97  
Using Quick Menu: Protect ..................................................................................................................................................................................................98  
Deleting Still Images and Moving Images .................................................................................................................................................................................99  
Using Quick Menu: Delete .................................................................................................................................................................................................100  
Formatting the Memory Card...................................................................................................................................................................................................101  
MPEG Recording .....................................................................................................................................................................................................................102  
Saving Moving Picture Files onto a Memory Card............................................................................................................................................................102  
MPEG Playback .......................................................................................................................................................................................................................103  
Using Quick Menu: M.Play Select .....................................................................................................................................................................................104  
Recording an Image from a Cassette as a Still Image ...........................................................................................................................................................105  
Copying Still Images from a Cassette to Memory Card..........................................................................................................................................................106  
Copy to (Copies Files from the Memory Card to the Built-in Memory) (SC-D354/D355 only) ..............................................................................................107  
Marking Images for Printing.....................................................................................................................................................................................................108  
Using Quick Menu: Print Mark...........................................................................................................................................................................................109  
TM  
PictBridge (SC-D353/D354/D355 only) ................................................................................................................ 110  
Maintenance .............................................................................................................................................................. 112  
After Finishing a Recording......................................................................................................................................................................................................112  
Cleaning and Maintaining the Camcorder ...............................................................................................................................................................................113  
Using Your Camcorder Abroad.................................................................................................................................................................................................114  
Troubleshooting ......................................................................................................................................................... 115  
Specifications ............................................................................................................................................................. 118  
Index........................................................................................................................................................................... 119  
Warranty(SEA users only)...........................................................................................................................................120  
5
ENGLISH  
Notes and Safety Instructions  
Notes regarding the Rotation of the LCD Screen  
Please rotate the LCD screen carefully as illustrated.  
Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder.  
1
1. LCD screen closed.  
2
3
4
5
6
2. Standard recording using the LCD screen.  
Open the LCD screen with your finger.  
LCD  
open  
knob  
3. Recording when looking at the LCD screen from the top.  
4. Recording when looking at the LCD screen from the front.  
5. Recording when looking at the LCD screen from the left.  
6. Recording with the LCD screen closed.  
6
ENGLISH  
Notes and Safety Instructions  
Notices regarding Copyright  
Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted.  
Unauthorized copying of copyrighted material may be against the law.  
All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung  
product are trademarks or registered trademarks of their respective holders.  
Notes regarding Moisture Condensation  
1. A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder.  
for example:  
When you move the Camcorder from a cold location to a warm location (e.g. from outside to inside during winter.)  
When you move the Camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.)  
2. If the  
(DEW) protection feature is activated, leave the Camcorder for at least two hours in a dry, warm room with the  
cassette compartment opened and the Battery pack removed.  
Notes regarding Camcorder  
1. Do not leave the Camcorder exposed to high temperatures (above 60°C or 140°F).  
For example, in a parked car in the sun or exposed to direct sunlight.  
2. Do not let the Camcorder get wet.  
Keep the Camcorder away from rain, sea water, and any other form of moisture.  
If the Camcorder gets wet, it may get damaged.  
Sometimes a malfunction due to exposure to liquids cannot be repaired.  
7
ENGLISH  
Notes and Safety Instructions  
Notes regarding the Battery Pack  
It is recommended to use original battery pack that is available at SAMSUNG service center.  
Make sure that the Battery pack is fully charged before starting to record.  
To preserve battery power, keep your Camcorder turned off when you are not operating it.  
If your Camcorder is in CAMERA mode, and it is left in STBY mode without being operated for more than 5 minutes with a  
tape inserted, it will automatically turn itself off to protect against unnecessary battery discharge.  
Make sure that the Battery pack is fitted firmly into place.  
Do not drop the Battery pack. Dropping the Battery pack may damage it.  
A brand new Battery pack is not charged.  
Before using the Battery pack, you need to charge it completely.  
Fully discharging a Lithium-Ion battery damages the internal cells. The Battery pack may be prone to leakage when fully  
discharged.  
When the battery reaches the end of its life, please contact your local dealer.  
The batteries have to be dealt with as chemical waste.  
Notes regarding the Video Head Cleaning  
To ensure normal recording and a clear picture, clean the video heads regularly.  
If a square block-shape distorts playback, or only a blue screen is displayed, the video heads may be dirty.  
If this happens, clean the video heads with a dry type cleaning cassette.  
Do not use a wet-type cleaning cassette. It may damage the video heads.  
8
ENGLISH  
Notes and Safety Instructions  
Note regarding the Lens  
Do not film with the camera lens pointing directly at the sun.  
Direct sunlight can damage the CCD(Charge Coupled Device).  
Notes regarding electronic Viewfinder  
1. Do not position the Camcorder such that the Viewfinder is pointing towards the sun.  
Direct sunlight can damage the inside of the Viewfinder. Be careful when placing the Camcorder under sunlight  
or near a window exposed to sunlight.  
2. Do not pick up the Camcorder by holding the Viewfinder.  
3. Applying excessive force to the Viewfinder may damage it.  
Notes regarding ‘Record’ or ‘Playback’ Using the LCD Screen  
1. The LCD screen has been manufactured using high precision  
technology. However, there may be tiny dots  
(red, blue or green in color) that appear on the LCD screen.  
These dots are normal and do not affect the recorded picture  
in any way.  
2. When you use the LCD screen under direct sunlight or outdoors,  
it maybe difficult to see the picture clearly.  
If this occurs, we recommend using the Viewfinder.  
3. Direct sunlight can damage the LCD screen.  
Notes regarding the Hand Strap  
To ensure a steady picture while filming, check that the hand strap is properly adjusted.  
Do not force your hand into the hand strap as you could damage it.  
9
ENGLISH  
Notes and Safety Instructions  
Precaution regarding the Lithium Battery  
1. The Lithium battery maintains the clock function and user settings; even if the Battery pack or AC adapter is removed.  
2. The Lithium battery for the Camcorder lasts about 6 months under normal operation from time of installation.  
3. When the Lithium battery becomes weak or dead, the date/time indicator will display 12:00 AM JAN.1,2005 when you set  
the Date/Time to on.  
When this occurs, replace the Lithium battery with a new one(type CR2025).  
4. There is a danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
Warning: Keep the Lithium battery out of reach of children. Should a battery be swallowed, consult a doctor  
immediately.  
Servicing  
Do not attempt to service this Camcorder yourself.  
Opening or removing covers may expose you to dangerous voltage or other hazards.  
Refer all servicing to qualified service personnel.  
Replacement Parts  
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer  
and having the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
10  
ENGLISH  
Getting to Know Your Camcorder  
Features  
Multi OSD Language  
You can select the desired OSD language among English, French, Spanish, German, Italian, Portuguese, Polish and Dutch.  
Digital Data Transfer Function with IEEE1394  
By incorporating the IEEE 1394 (i.LINK™: i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV  
data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit  
various images.  
USB Interface for Digital Image Data Transfer (SC-D352/D353/D354/D355 only)  
You can transfer images to a PC using the USB interface without an add-on card.  
PHOTO  
The photo function lets you capture an object as a still along with sound, while in camera mode.  
900x Digital Zoom  
Allows you to magnify an image up to 900 times its original size.  
Color TFT LCD  
A high-resolution color TFT LCD gives you clean, sharp images as well as the ability to review your recordings immediately.  
Digital Image Stabilizer (DIS)  
The DIS compensates for any handshake, reducing unstable images particularly at high magnification.  
Various Digital Effects  
The digital effects allows you to give your films a special look by adding various special effects.  
Back Light Compensation (BLC)  
The BLC function compensates for the bright background behind a subject you're recording.  
Program AE  
The program AE enables you to alter the shutter speed and aperture to suit the type of scene/action to be filmed.  
NITE PIX (SC-D352/D354/D355 only)  
The NITE PIX function enables you to record a subject in a dark place.  
Digital Still Camera Function (SC-D353/D354/D355 only)  
-
-
Using Memory card, you can easily record and playback standard still images.  
You can transfer standard still images on the Memory card to your PC using the USB interface.  
MPEG Recording (SC-D353/D354/D355 only)  
MPEG recording makes it possible to record video onto a Memory card.  
Multi Memory Card Slot (SC-D355 only)  
Multi Memory card slot is able to use Memory Stick, Memory Stick PRO, MMC and SD.  
Built-in Memory (SC-D354/D355 only)  
You can use digital still camera functions without a separate external Memory card, using the built-in memory installed in your  
Camcorder. (SC-D354: 32MB/SC-D355: 64MB)  
11  
ENGLISH  
Getting to Know Your Camcorder  
Accessories Supplied with Camcorder  
Make sure that the following basic accessories are supplied with your digital video camera.  
Basic Accessories  
1. Lithium Ion Battery Pack  
2. AC Power Adapter  
(AA-E8 TYPE)  
3. AC Cord  
1. Lithium Ion Battery Pack  
2. AC Power Adapter  
(AA-E8 TYPE)  
3. AC Cord  
AD43-00136A  
AD44-00090A  
AD39-00076A  
4. Audio/Video Cable  
5. Instruction Book  
4. Audio/Video Cable  
5. Instruction Book  
6. Lithium Battery  
(CR2025)  
6. Lithium Battery for  
Remote Control (SC-D354/D355 only) or Clock.  
(TYPE: CR2025)  
AD39-00001A  
AD43-10130H  
9.Software CD  
7. Remote Control  
(SC-D354/D355 only)  
7. Remote Control  
8. USB Cable  
8. USB Cable (SC-D352/D353/D354/D355 only)  
9. Software CD (SC-D352/D353/D354/D355 only)  
10. Lens Cover  
AD59-00085A  
10. Lens Cover  
AD39-00073A  
11. Lens Cover Strap  
11. Lens Cover Strap  
Optional Accessories  
12. S-Video Cable  
AD97-07354B  
AD72-00049A  
13. Memory Stick (SC-D353/D354/D355 only)  
12. S-Video Cable  
13. Memory Stick  
AC39-42001Z  
1109-001221  
12  
ENGLISH  
Getting to Know Your Camcorder  
Front & Left View  
6. EASY.Q button  
7. Function buttons  
1. Lens  
2. LED light  
(SC-D352/D354/D355 only)  
8. TFT LCD screen  
3. Remote sensor  
(SC-D354/D355 only)  
4. S-Video jack  
9. IR(Infrared) light  
(SC-D352/D354/D355 only)  
5. Internal MIC  
1. Lens  
6. EASY.Q button  
8. TFT LCD screen  
(see page 40)  
2. LED light (see page 48)  
(SC-D352/D354/D355 only)  
9. IR(Infrared) light  
7. Function buttons  
(SC-D352/D354/D355 only)  
PLAYER  
-
CAMERA  
EASY.Q  
M.Player (SC-D353/D354/D355 only)  
3. Remote sensor  
(SC-D354/D355 only)  
-
4. S-Video jack  
5. Internal MIC  
: REW  
: FF  
REC SEARCH –  
REC SEARCH +  
FADE  
REV  
FWD  
: PLAY/STILL  
: STOP  
S.SHOW(SLIDE SHOW)  
MULTI DISP.  
BLC  
13  
ENGLISH  
Getting to Know Your Camcorder  
Left Side View  
5. Focus adjustment knob  
6. Viewfinder  
1. DISPLAY  
7. COLOR NITE  
2. MACRO/PB ZOOM  
3. Speaker  
SHUTTER  
(SC-D351/D353  
only)  
4. Mode switch  
7. COLOR NITE/  
(SC-D353/D354/D355 only)  
LED LIGHT  
(SC-D352/D354/  
D355 only)  
1. DISPLAY (see page 25)  
2. MACRO/PB ZOOM (see page 44/see page 75)  
3. Speaker  
6. Viewfinder  
7. COLOR NITE SHUTTER (see page 47)  
(SC-D351/D353 only)  
7. COLOR NITE/LED LIGHT (see page 48)  
(SC-D352/D354/D355 only)  
4. Mode switch (MEMORY CARD/TAPE)  
(SC-D353/D354/D355 only)  
5. Focus adjustment knob  
14  
ENGLISH  
Getting to Know Your Camcorder  
Right & Top View  
1. NITE PIX switch  
(SC-D352/D354/D355 only)  
DV  
7. TAPE EJECT  
DV  
IEEE1394  
2. Menu selector (VOL/MF)  
3. MENU button  
8. Zoom lever  
USB  
9. PHOTO button  
USB  
USB  
AV  
(SC-D352/D353  
D354/ D355  
only)  
10. Jacks  
MIC  
11. Hand strap hook  
4. Start/Stop button  
5. Power switch  
AV  
AV  
12. Jack cover  
MIC  
13. Cassette door  
External  
MIC  
6. DC jack  
1. NITE PIX switch  
8. Zoom lever  
(SC-D352/D354/D355 only)  
9. PHOTO button  
(see page 68)  
2. Menu selector (VOL/MF)  
3. MENU button  
10. Jacks  
4. Start/Stop button  
5. Power switch (CAMERA or PLAYER)  
6. DC jack  
11. Hand strap hook  
12. Jack cover  
13. Cassette door  
7. TAPE EJECT  
15  
ENGLISH  
Getting to Know Your Camcorder  
Rear & Bottom View  
3. Memory card slot  
(SC-D353/D354/D355  
only)  
4. Battery release  
1. Lithium battery cover  
2. Charging indicator  
5. Tripod receptacle  
1. Lithium battery cover  
2. Charging indicator  
Memory Card Slot (Usable Memory Card)  
SC-D353/D354 only  
SC-D355 only  
3. Memory card slot (SC-D353/D354/D355 only)  
4. Battery release  
Memory Stick  
Memory Stick PRO  
Memory Stick  
Memory Stick PRO  
5. Tripod receptacle  
SD/MMC  
16  
ENGLISH  
Getting to Know Your Camcorder  
Remote Control (SC-D354/D355 only)  
18. DISPLAY  
17. Zoom  
1. PHOTO  
2. START/STOP  
3. SELF TIMER  
4. ZERO MEMORY  
5. PHOTO SEARCH  
6. A.DUB  
16. X2  
15. DATE/TIME  
7.  
(FF)  
14.  
(SLOW)  
8.  
9.  
(REW)  
(PLAY)  
13.  
12.  
(STILL)  
(STOP)  
11. F. ADV  
10. Direction  
1. PHOTO (see page 68)  
10. Direction (  
/
) (see page 73)  
2. START/STOP  
11. F. ADV (see page 74)  
3. SELF TIMER (see page 43)  
4. ZERO MEMORY (see page 42)  
5. PHOTO SEARCH  
12.  
13.  
14.  
(STOP)  
(STILL)  
(SLOW)  
6. A.DUB (see page 77)  
15. DATE/TIME  
16. X2 (see page 74)  
17. Zoom  
7.  
8.  
9.  
(FF)  
(REW)  
(PLAY)  
18. DISPLAY  
17  
ENGLISH  
Preparation  
Adjusting the Hand Strap  
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.  
The Hand strap enables you to:  
- Hold the Camcorder in a stable, comfortable position.  
- Press the ZOOM and Start/Stop button without having to change the position of your hand.  
Hand Strap  
1
2
3
1. Insert the Hand strap into the  
Hand strap hook on the front side  
of the Camcorder and pull its end  
through the hook.  
2. Insert your hand into the hand  
strap and adjust its length for  
your convenience.  
3. Close the Hand strap.  
When You carry Your Camcorder  
1
2
3
1. Pull and open the Hand strap  
cover to release the Hand strap.  
2. Remove it from the ring and  
adjust its length.  
3. Put your hand through the Hand  
Strap and close the cover of  
Hand Strap.  
Attaching the Lens Cover  
1
2
3
1. Hook up the Lens cover with the  
Lens cover strap as illustrated.  
2. Hook up the Lens cover strap to  
the Hand strap, and adjust it  
following the steps as described  
for the Hand strap  
3. Close the Hand strap.  
18  
ENGLISH  
Preparation  
Lithium Battery Installation  
Battery Installation for the Internal Clock  
The Lithium battery maintains the clock function and preset contents of the memory; even if the Battery pack or AC Power  
adapter is removed.  
The Lithium battery for the Camcorder lasts about 6 months under normal operation from the time of installation.  
When the Lithium battery becomes weak or dead, the date/time indicator will display  
12:00 AM JAN.1,2005 when you set the Date/Time to on.  
When this occurs, replace the Lithium battery with CR2025 type.  
1. Remove the Lithium-ion battery from the rear of the Camcorder.  
2. Open the Lithium battery cover on the rear of the Camcorder.  
3. Position the Lithium battery in the Lithium battery holder, with the positive (  
terminal face up.  
)
4. Close the Lithium battery cover.  
Battery Installation for the Remote Control (SC-D354/D355 only)  
You need to insert or replace the Lithium battery when:  
- You purchase the Camcorder.  
- The remote control doesn’t work.  
Position the Lithium battery in the Lithium battery holder, with the positive (  
terminal face up.  
Be careful not to reverse the polarity of the battery.  
)
[ Note ]  
The Lithium battery must be inserted in the correct direction.  
Warning: Keep the Lithium battery out of the reach of the children.  
Should any battery be swallowed, consult a doctor immediately.  
19  
ENGLISH  
Preparation  
Connecting a Power Source  
There are two types of power source that can be connected to your Camcorder.  
- The AC Power adapter and AC Cord: used for indoor recording.  
- The Battery pack: used for outdoor recording.  
To use the AC Power Adapter and DC Cable  
1. Connect the AC Power adapter to the AC Cord.  
2. Connect the AC Cord to a wall socket.  
[ Notes ]  
You must use an AA-E8 TYPE AC Power adapter.  
The plug and wall socket type may differ according to  
your resident country.  
Power Switch  
3. Connect the DC cable to the DC jack socket of the  
Camcorder.  
4. Set the Camcorder to each mode by holding down the tab  
on the Power switch and turning it to the CAMERA or  
PLAYER mode.  
To Select the Camcorder Mode (SC-D353/D354/D355 only)  
If you want to use this unit as a Camcorder, set the Mode  
switch to TAPE.  
<CAMERA mode>  
<PLAYER mode>  
If you want to use this unit as a DSC (Digital Still Camera),  
Set the Mode switch to MEMORY CARD.  
20  
ENGLISH  
Preparation  
Using the Lithium Ion Battery Pack  
The amount of continuous recording time available depends on  
- The type and capacity of the Battery pack you are using.  
- How often the zoom function is used.  
It is recommended that you have several batteries available.  
Charging the Lithium Ion Battery Pack  
1. Attach the Battery pack to the Camcorder.  
2. Connect the AC Power adapter to an AC Cord and connect the AC Cord to  
a wall socket.  
3. Connect the DC cable to the DC jack socket on the Camcorder.  
4. Turn the Power switch to Off, and the charging indicator will start to flash,  
showing that the battery is charging.  
Power Switch  
Blinking time  
Charging rate  
Less than 50%  
Once per second  
Twice per second  
50% ~ 75%  
75% ~ 90%  
90% ~ 100%  
4
Three times per second  
Blinking stops and stays on  
On for a second and  
off for a second  
Error - Reset the Battery pack and  
the DC cable  
5. When the battery is fully charged, disconnect the Battery pack and the AC Power adapter from  
the Camcorder.  
<Charging indicator>  
Even with the Power switched Off, the Battery pack will still discharge.  
[ Notes ]  
The Battery pack may be charged a little at the time of purchase.  
To prevent reduction in the life and capacity of the Battery pack, always remove it from the Camcorder after it is fully charged.  
The amount of continuous recording time available depends on:  
- The type and capacity of the Battery pack you are using.  
- How often the zoom is used.  
- Type of use (Camcorder/Camera/With LCD screen etc.).  
- Ambient temperature.  
It is recommended to have additional battery packs available.  
Even when the Power switched Off, the Battery pack will still discharge if it is left attached to the device.  
21  
ENGLISH  
Preparation  
Table of continuous Recording Time based on Model and Battery Type.  
If you close the LCD screen, it switches off and the Viewfinder switches on automatically.  
The continuous recording times given in the table below are approximations.  
Actual recording time depends on usage.  
Time  
Continuous recording time  
Charging  
time  
Battery  
LCD ON  
VIEWFINDER ON  
Approx.  
Approx.  
Approx.  
SB-LSM80  
1hr 20min  
1hr 20min  
1hr 30min  
Approx.  
3hr  
Approx.  
Approx.  
3hr  
SB-LSM160  
(AD43-00148A)  
2hr 40min  
[ Notes ]  
The Battery pack should be recharged in an environment between 32 °F (0 °C)and 104 °F (40 °C).  
The Battery pack should never be charged in a room with a temperature that is below 32 °F (0 °C).  
The life and capacity of the Battery pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in temperatures  
above 104 °F (40 °C)for a long period of time, even when it is fully recharged.  
Do not put the Battery pack near any heat source (i.e.fire or a heater).  
Do not disassemble, apply pressure to or heat the Battery pack.  
Do not allow the + and terminals of the Battery pack to be short-circuited.  
It may cause leakage, heat generation, induce overheating or fire.  
Use SB-LSM80 or SB-LSM160 Battery pack only.  
It is recommended to use original battery pack that is available at SAMSUNG service center.  
22  
ENGLISH  
Preparation  
Battery Level Display  
The battery level display indicates the amount of power remaining in the Battery pack.  
a. Fully charged  
b. 20~40% used  
c. 40~80% used  
d. 80~95% used  
e. Completely used (Blinking)  
(The Camcorder will turn off soon, change the battery as soon as possible)  
(Blinking)  
[ Notes ]  
Please refer to the Table on page 22 for approximate continuous recording time.  
The recording time is affected by temperature and environmental conditions.  
The recording time shortens dramatically in a cold environment.  
The continuous recording times in the operating instructions are measured using a fully charged Battery pack at 77 °F (25 °C).  
As the environmental temperature and conditions vary. The remaining battery time may differ from the approximate continuous  
recording times given in the instructions.  
23  
ENGLISH  
Preparation  
OSD (On Screen Display in Camera/Player Modes)  
1. Battery level (see page 23)  
2. Digital effects mode  
(see page 65)  
3. EASY.Q (see page 40)  
4. DIS (see page 61)  
5. Program AE (see page 63)  
6. White balance mode  
(see page 59)  
7. Shutter speed (see page 57)  
8. Exposure (see page 57)  
9. Manual focus (see page 58)  
10. Date/Time (see page 33)  
11. Zoom position (see page 44)  
12. NITE PIX (see page 49)  
(SC-D352/D354/D355 only)  
13. Color Nite (see page 47)  
14. USB  
21. Tape counter  
22. Zero memory  
OSD in Camera Mode  
(SC-D354/D355 only)  
(see page 42)  
23. Record speed mode  
24. Operating mode  
25. Self timer (SC-D354/D355 only)  
26. Photo image  
27. Tele MACRO (see page 44)  
28. Audio playback  
29. Volume control (see page 70)  
30. DV IN (DV data transfer mode)  
(see page 80)  
26 25  
27  
24 23 22  
1
2
3
4
SP  
21  
0:00:11  
14min  
16BIt  
STBY  
10Sec  
Art  
20  
19  
5
6
7
8
9
18  
No Tape !  
Nite Pix  
17  
16  
15  
14  
S. 1/50  
[29]  
12:00 AM JAN.1,2005  
13  
Color N.1/25  
10  
W
T
11  
7
12  
S. 1/50  
[29]  
31. AV IN (SC-D355 only)  
32. Audio dubbing  
8
(SC-D354/D355 only)  
(see page 77)  
OSD in Player Mode  
(SC-D352/D353/D354/D355 only)  
15. Remote (see page 28)  
(SC-D354/D355 only)  
16. Wind cut (see page 56)  
17. BLC (Back Light Compensation)  
(see page 46)  
33. DEW (see page 7)  
34. Warning Indicator (see page 115)  
35. Message line (see page 115)  
32  
SP  
0:00:00:10  
28  
33  
Sound[2]  
14min  
16BIt  
34  
35  
No Tape !  
18. LED LIGHT  
31  
30  
AV In  
(SC-D352/D354/D355 only)  
(see page 48)  
12:00 AM JAN.1,2005  
19. Audio recording mode  
(see page 55)  
[10]  
29  
20. Remaining tape  
(measured in minutes)  
24  
ENGLISH  
Preparation  
OSD (On Screen Display in M.Cam/M.Player Modes) (SC-D353/D354/D355 only)  
1. Photo quality  
OSD in M.Cam Mode  
2. CARD (Memory Card) indicator  
4
3
3. Image counter  
Total number of recordable still images.  
4. Image recording and loading indicator  
46  
2
3 min  
5. Erase protection indicator (see page 97)  
6. Print mark (see page 108)  
7. Folder number-file number (see page 89)  
8. JPEG image size  
No Memory Card !  
Nite Pix  
1
[29]  
12:00 AM JAN.1,2005  
W
T
9. Slide show  
[29]  
Turning the OSD (On Screen Display) On/Off  
Turning OSD on/off  
OSD in M.Player Mode  
9
Press the DISPLAY button on the left side control panel.  
- Each press of the button toggles the OSD function on and off.  
- When you turn the OSD off,  
2/46  
800X600  
Slide  
8
In CAMERA Mode: The STBY, REC modes are always displayed on the OSD, even  
when the OSD is turned off and the key input is displayed for 3 seconds  
then turned off.  
In PLAYER Mode: When you press any function button, the function is displayed  
on the OSD for 3 seconds before it turns off.  
No Memory Card !  
5
6
001  
12:00 AM JAN.1,2005  
7
100-0002  
Turning the Date/Time on/off  
To turn the Date/Time on or off, access the menu and change the Date/Time mode.  
(see page 33)  
25  
ENGLISH  
System Menu Setting  
Selecting the OSD Language  
The Language function works in Camera/Player/M.Cam/M.Player modes.  
Select the appropriate OSD Language among English, French, Spanish, German, Italian, Portuguese, Polish and Dutch.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/355 only)  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
4
6
Camera Mode  
System  
5. Move the Menu selector to the left or right to select Language, then press the Menu selector.  
Clock Set  
The available language options are listed.  
Beep Sound  
Language  
On  
English  
On  
Demonstration  
6. Move the Menu selector to the left or right to select desired OSD language,  
then press the Menu selector.  
MENU  
Move  
Select  
Exit  
The OSD language is refreshed in selected language.  
7. To exit, press the MENU button.  
Camera Mode  
Back  
English  
Français  
Español  
Deutsch  
Italiano  
Clock Set  
Beep Sound  
Language  
[ Note ]  
Demonstration  
Português  
The word “Language” in the menu is always indicated in English.  
MENU  
Move  
Select  
Exit  
26  
ENGLISH  
System Menu Setting  
Setting the Clock  
Clock setup works in Camera/Player/M.Cam/M.Player modes.  
The Date/Time is automatically recorded onto a tape.  
Before recording, please set the Date/Time.  
4
5
8
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
Camera Mode  
System  
Clock Set  
Beep Sound  
Language  
On  
English  
On  
Demonstration  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
Camera Mode  
Back  
5. Move the Menu selector to the left or right to select Clock Set, then press the Menu selector.  
Clock Set  
JAN  
1
2005  
The year will highlight first.  
Beep Sound  
Language  
12 : 00 AM  
Demonstration  
6. Move the Menu selector to the left or right to set current Year, then press the Menu selector.  
The month will be highlighted.  
MENU  
Move  
Select  
Exit  
7. You can set the month, day, hour and minute following the same procedure for setting  
the year.  
Camera Mode  
Back  
Clock Set  
JAN  
1
2005  
8. Press the Menu selector after setting the minutes.  
Beep Sound  
Language  
12 : 00 AM  
Complete!  
The message Complete! will be displayed.  
To adjust the clock, select the Year, Month, Day, Hour or Min by pressing the Menu selector,  
Demonstration  
then move the Menu selector to the left or right to set respective values.  
MENU  
Move  
Select  
Exit  
9. To exit, press the MENU button.  
[ Notes ]  
After the Lithium battery loses its charge (after about 6 months), the date/time appears on the screen as 12:00 AM JAN.1,2005.  
You can set the year up to 2037.  
If the Lithium battery is not installed, any input data will not be backed up.  
27  
ENGLISH  
System Menu Setting  
Setting the Wireless Remote Control Acceptance (Remote) (SC-D354/D355 only)  
The Remote function works in Camera/Player/M.Cam/M.Player modes.  
The Remote option allows you to enable or disable the remote control for use with the Camcorder.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD.  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Remote, then press the Menu selector.  
6. Move the Menu selector to the left or right to select On or Off, then press the Menu selector.  
7. To exit, press the MENU button.  
4
6
Camera Mode  
System  
Clock Set  
Remote  
On  
Beep Sound  
Language  
On  
English  
On  
Demonstration  
MENU  
Move  
Select  
Exit  
Camera Mode  
Back  
[ Note ]  
Clock Set  
Remote  
If you set the Remote to Off in the menu and try to use it, the remote control icon(  
will blink for 3 seconds on the LCD screen and then disappear.  
)
Off  
On  
Beep Sound  
Language  
Demonstration  
MENU  
Move  
Select  
Exit  
28  
ENGLISH  
System Menu Setting  
Setting the Beep Sound  
The Beep Sound function works in Camera/Player/M.Cam/M.Player modes.  
You can turn the Beep Sound on or off, when on, each press of a button sounds a beep.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
4
6
Camera Mode  
System  
5. Move the Menu selector to the left or right to select Beep Sound, then press the  
Clock Set  
Menu selector.  
Beep Sound  
Language  
On  
English  
On  
Demonstration  
6. Move the Menu selector to the left or right to select On or Off, then press the  
Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
Camera Mode  
Back  
Clock Set  
Beep Sound  
Language  
Off  
On  
Demonstration  
MENU  
Move  
Select  
Exit  
29  
ENGLISH  
System Menu Setting  
Setting the Shutter Sound (SC-D353/D354/D355 only)  
The Shutter Sound function works in both Player and M.Cam modes.  
You can turn the Shutter Sound on or off, when on, with each press of the PHOTO button the Shutter will Sound.  
1. Set the Power switch to CAMERA or PLAYER.  
1
2. If the Power switch is set to CAMERA mode, set the MODE switch to MEMORY CARD.  
If the Power switch is set to PLAYER mode, set the MODE switch to TAPE.  
3. Press the MENU button.  
The menu list will appear.  
4
6
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
Player Mode  
System  
Clock Set  
5. Move the Menu selector to the left or right to select Shutter Sound, then press the  
Beep Sound  
Shutter Sound  
USB Version  
Language  
On  
On  
Menu selector.  
USB 2.0  
English  
6. Move the Menu selector to the left or right to select On or Off, then press the Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
Player Mode  
Back  
Clock Set  
Beep Sound  
Shutter Sound  
USB Version  
Language  
Off  
On  
MENU  
Move  
Select  
Exit  
30  
ENGLISH  
System Menu Setting  
Viewing the Demonstration  
Before you begin: Make Sure that there is no tape inserted in the Camcorder. (see page 36)  
Demonstration automatically shows you the major functions that are included with your  
Camcorder so that you may use them more easily.  
1
The Demonstration function may only be used in the Camera mode without a tape inserted in  
the Camcorder.  
The Demonstration operates repeatedly until the Demonstration mode switched Off.  
1. Set the Power switch to CAMERA.  
4
6
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
Camera Mode  
System  
Clock Set  
Beep Sound  
Language  
On  
English  
On  
The menu list will appear.  
Demonstration  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
MENU  
Move  
Select  
Exit  
5. Move the Menu selector to the left or right to select Demonstration, then press the  
Camera Mode  
Back  
Menu selector.  
Clock Set  
Beep Sound  
Language  
6. Move the Menu selector to the left or right to select On, then press the MENU button.  
Demonstration  
Off  
On  
The Demonstration will begin.  
MENU  
Move  
Select  
Exit  
7. To quit the Demonstration, press the MENU button.  
Samsung Camcorder is...  
[ Notes ]  
The Demonstration mode is automatically activated when the Camcorder is left idle for more than  
10 minutes after switching to the Camera mode (no tape is inserted in the Camcorder).  
If you press other buttons (FADE, BLC, PHOTO, EASY.Q) during the Demonstration mode,  
the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other  
functions.  
While setting the NITE PIX to ON, the Demonstration function does not work.  
[Digital Camcorder]  
Demonstration  
(SC-D352/D354/D355 only)  
31  
ENGLISH  
Display Menu Setting  
Adjusting the LCD Screen  
This function works in Camera/Player/M.Cam/M.Player modes.  
Your Camcorder is equipped with a 2.36 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you  
are recording or playing back directly.  
Depending on the conditions under which you are using the Camcorder (indoors or outdoors for example), you can adjust;  
- LCD Bright  
- LCD Color  
1
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
The menu list will appear.  
4. Move the Menu selector to the left or right to select Display, then press the Menu selector.  
4
6
Camera Mode  
Display  
LCD Bright  
LCD Color  
Date/Time  
5. Move the Menu selector to the left or right to select the item you want to adjust  
(LCD Bright or LCD Color), then press the Menu selector.  
Off  
TV Display  
On  
6. Move the Menu selector to the left or right to adjust the value of the selected item  
MENU  
Move  
Select  
Exit  
(LCD Bright or LCD Color), then press the Menu selector.  
You can set values for LCD Bright and LCD Color between 0~35.  
Camera Mode  
Back  
7. To exit, press the MENU button.  
[18]  
LCD Bright  
LCD Color  
Date/Time  
TV Display  
LCD Bright & LCD Color functions do not affect the brightness and color of the image  
to be recorded.  
MENU  
Move  
Select  
Exit  
32  
ENGLISH  
Display Menu Setting  
Displaying the Date/Time  
The Date/Time function works in Camera/Player/M.Cam/M.Player modes.  
The date and time are automatically recorded on a special data area of the tape.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select Display, then press the Menu selector.  
4
6
Camera Mode  
Display  
5. Move the Menu selector to the left or right to select Date/Time, then press the Menu selector.  
LCD Bright  
LCD Color  
Date/Time  
TV Display  
Off  
6. Move the Menu selector to the left or right to select the display type of the Date/Time,  
On  
then press the Menu selector.  
Display type of the Date/Time: Off, Date, Time, Date&Time.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
Camera Mode  
Back  
LCD Bright  
LCD Color  
Date/Time  
TV Display  
[ Notes ]  
Off  
The Date/Time will read 12:00 AM JAN.1,2005 in the following conditions.  
Date  
Time  
- During playback of a blank section of a tape.  
Date&Time  
- If the tape was recorded before setting the Date/Time in the Camcorder.  
- When the Lithium battery becomes weak or dead.  
MENU  
Move  
Select  
Exit  
Before you use the Date/Time function, you must set the clock. See Setting the Clock on page 27.  
33  
ENGLISH  
Display Menu Setting  
Setting the TV Display  
The TV Display function works in Camera/Player/M.Cam/M.Player modes.  
You can select the output path of the OSD (On Screen Display).  
- Off: The OSD appears in the LCD screen and Viewfinder only.  
- On: The OSD appears in the LCD screen, Viewfinder and TV.  
- Use the DISPLAY button located at the left side of the Camcorder to turn the OSD on/off on the LCD screen  
/Viewfinder/TV.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select Display, then press the Menu selector.  
4
Camera Mode  
Display  
5. Move the Menu selector to the left or right to select TV Display, then press the Menu selector.  
LCD Bright  
LCD Color  
Date/Time  
Off  
6. To activate TV Display function, move the Menu selector to the left or right to select On or Off,  
TV Display  
On  
then press the Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
6
Camera Mode  
Back  
LCD Bright  
LCD Color  
Date/Time  
TV Display  
Off  
On  
MENU  
Move  
Select  
Exit  
34  
ENGLISH  
Basic Recording  
Using the Viewfinder  
In the PLAYER mode, the Viewfinder will work when the LCD screen is closed.  
In the CAMERA mode, the Viewfinder will work when the LCD screen is closed or rotated counterclockwise 180°.  
Adjusting the Focus  
The focus adjustment knob of the Viewfinder enables individuals with vision problems to see clearer  
images.  
1. Close the LCD screen and pull out the Viewfinder.  
2. Use the focus adjustment knob of the Viewfinder to focus the picture.  
[ Notes ]  
Viewing the sun or any strong light source through the Viewfinder for a prolonged period may be harmful, or cause temporary  
impairment.  
The Viewfinder will work either in PLAYER mode with LCD screen closed or in CAMERA mode with LCD screen closed or facing  
the front.  
35  
ENGLISH  
Basic Recording  
Inserting and Ejecting a Cassette  
When inserting a tape or closing the cassette compartment, do not apply excessive force.  
As it may cause a malfunction.  
Do not use any tape other than Mini DV cassettes.  
1
2
1. Connect a power source and slide the TAPE EJECT switch.  
The cassette door opens automatically.  
2. Insert a tape into the cassette compartment with the tape window facing  
outward and the protection tab toward the top. (Inserting a Cassette)  
Remove the cassette tape, which is automatically ejected by pulling the  
cassette out. (Ejecting a Cassette)  
3-1  
3-2  
PUSH  
3. Press the area marked PUSH on the cassette door until it clicks into place.  
Be careful to keep the hand strap away from the cassette door when closing  
it. Closing the cassette door with the hand strap inside may cause a damage  
to the set.  
The cassette is loaded automatically.  
a
b
SAVE  
[ Note ]  
When you have recorded something that you wish to keep, you can protect it so that it will not be accidentally  
erased.  
a. Protecting a tape:  
Push the safety tab on the cassette so that the hole is uncovered.  
b. Removing the tape protection:  
REC  
If you no longer wish to keep the recording on the cassette, push the safety tab back so that it covers  
the hole.  
How to store a tape  
a. Avoid places with magnets or magnetic interference.  
b. Avoid humidity and dust prone places.  
c. Keep the tape in an upright position and avoid storing it in direct sunlight.  
d. Avoid dropping or knocking your tapes.  
36  
ENGLISH  
Basic Recording  
Hints for Stable Image Recording  
While recording, it is very important to hold the Camcorder correctly.  
Fix the lens cover firmly by clipping it to the hand strap. (see page 18)  
Recording with the LCD Screen  
1. Hold the Camcorder firmly using the hand strap.  
2. Place your right elbow against your side.  
3. Place your left hand under or beside the LCD screen to support and adjust it.  
Do not touch the built-in microphone.  
4. Choose a comfortable, stable position for the shots that you are taking.  
You can lean against a wall or on a table for greater stability.  
Do not forget to breathe gently.  
5. Use the LCD frame as a guide to determine the horizontal plane.  
6. Whenever possible, use a tripod.  
Recording with the Viewfinder  
1. Hold the Camcorder firmly using the hand strap.  
2. Place your right elbow against your side.  
3. Place your left hand under the Camcorder to support it.  
Be sure not to touch the built-in microphone.  
4. Choose a comfortable, stable position for the shots that you are taking.  
You can lean against a wall or on a table for greater stability.  
5. To view an object through the Viewfinder, pull it out until you hear the click sound.  
Excessive force may cause damage to the Viewfinder.  
6. Place your eye firmly against the Viewfinder eyecup.  
7. Use the Viewfinder frame as a guide to determine the horizontal plane.  
8. Whenever possible, use a tripod.  
37  
ENGLISH  
Basic Recording  
Various Recording Techniques  
In some situations different recording techniques may be required for more dramatic results.  
1. General recording.  
1
2
4
2. Downward recording.  
Making a recording with a top view of the LCD screen.  
3. Upward recording.  
Making a recording viewing the LCD screen from below.  
3
5
4. Self recording.  
Making a recording viewing the LCD screen from the front.  
5. Recording with the Viewfinder.  
In circumstances where it is difficult to use the LCD screen,  
the Viewfinder can be used as a convenient alternative.  
[ Note ]  
Please rotate the LCD screen carefully as excessive rotation may cause damage to  
the inside of the hinge that connects the LCD screen to the Camcorder.  
38  
ENGLISH  
Basic Recording  
Making your First Recording  
1. Connect a power source to the Camcorder. (see page 20)  
(A Battery pack or a AC Power adapter)  
1
4
2
Insert a cassette. (see page 36)  
2. Remove the Lens cover.  
3. Set the Power switch to CAMERA.  
Open the LCD screen.  
Set the Mode switch to TAPE.  
3
(SC-D353/D354/D355 only)  
Make sure that STBY is displayed.  
If the write protection tab of the cassette is open(set to save),  
STOP and Protection! will be displayed.  
Release the write protection tab to record.  
Make sure the image you want to record appears on the LCD screen or Viewfinder.  
Make sure the battery level indicates that there is enough remaining power for your expected recording time.  
4. To start recording, press the Start/Stop button.  
REC is displayed on the LCD screen.  
To stop recording, press the Start/Stop button again.  
STBY is displayed on the LCD screen.  
[ Note ]  
Detach the Battery pack when you are finished recording to prevent unnecessary battery power consumption.  
39  
ENGLISH  
Basic Recording  
Using EASY.Q Mode (for Beginners)  
The EASY.Q mode works only in Camera mode.  
The EASY.Q mode allows a beginner to easily make good recordings.  
1. Set the Power switch to CAMERA.  
1
3
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. By pressing the EASY.Q button, all functions on the Camcorder will be set to off and the recording  
settings will be set to the following basic modes:  
Battery level, recording mode, counter, date/time, and DIS ( ) will be displayed.  
The word EASY.Q will appear on the LCD screen at the same time.  
However, the Date/Time will only be seen if it has been previously set. (see page 33)  
4. Press the Start/Stop button to start recording.  
Recording will begin using the basic automatic settings.  
5. Press the EASY.Q button again in the STBY mode and then turn the EASY.Q mode off.  
The EASY.Q function will not turn off while you are recording.  
The camcorder will return to the settings that were set prior to activating EASY.Q mode.  
SP  
0:00:10  
60min  
STBY  
[ Notes ]  
In EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.  
If you want to use these functions, you must first turn the EASY.Q mode off.  
The EASY.Q mode settings are deleted when the Battery pack is removed from the Camcorder and  
must be reset when the Battery pack is replaced.  
EASY.Q mode will not turn off during a recording.  
Taking a photo image using the PHOTO button while EASY.Q is set releases DIS function.  
Digital Zoom, COLOR NITE SHUTTER or Digital Effect is not available in the EASY.Q mode.  
40  
ENGLISH  
Basic Recording  
When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used,  
it will switch off automatically.  
To use it again, press the Start/Stop button or set the Power switch to Off and then back to CAMERA.  
This auto power off feature is designed to save battery power.  
Record Search (REC SEARCH)  
You can view a recording using the REC SEARCH +, - function in STBY mode.  
REC SEARCH - enables you to play the recording backwards and  
REC SEARCH + enables you to play it forwards, for as long as you keep each button pressed  
down.  
If you press the REC SEARCH - button in STBY mode, your Camcorder will play  
in reverse for 3 seconds and return to the original position automatically.  
[ Note ]  
Mosaic shaped distortion may appear on the screen while in Record Search mode.  
41  
ENGLISH  
Basic Recording  
Setting the Zero Memory (SC-D354/D355 only)  
The ZERO MEMORY function works in both Camera and Player modes.  
You can mark a point on a tape that you want to return to following playback.  
1. Set the Power switch to CAMERA or PLAYER.  
1
2. Set the Mode switch to TAPE.  
3. Press the ZERO MEMORY button on the remote control before the recording or during playback  
at the point where you wish to return.  
The time code is changed to a tape counter that is set to ZERO MEMORY with the  
0:00:00 (ZERO MEMORY indicator).  
If you want to cancel the ZERO MEMORY function, press the ZERO MEMORY button again.  
4. Finding the zero position.  
When you have finished playback, fast forward or rewind the tape in stop mode.  
The tape stops automatically when it reaches the zero position.  
When you have finished recording, set the Power switch to PLAYER and press  
œ
the  
(REW) button.  
The tape stops automatically when it reaches the zero position.  
5. The tape counter with the  
(ZERO MEMORY indicator) disappears from the display and the  
tape counter is changed to the time code.  
[ Notes ]  
In the following situations, ZERO MEMORY mode may be canceled automatically:  
- At the end of the section marked with the ZERO MEMORY function.  
- When the tape is ejected.  
- When you remove the Battery pack or power supply.  
The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.  
42  
ENGLISH  
Basic Recording  
Self Record using the Remote Control (SC-D354/D355 only)  
The SELF TIMER function works only in Camera mode.  
When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds.  
1. Set the Power switch to CAMERA.  
1
3
4
2. Set the Mode switch to TAPE.  
3. Press the SELF TIMER button until the appropriate indicator is displayed in the LCD screen.  
4. Press the Start/Stop button to start the timer.  
- Self Timer starts counting down from 10 with a beep sound.  
- In the last one second of the countdown, the beep sound gets faster, then recording starts  
automatically.  
- If you want to cancel the Self Timer function before recording, press the SELF TIMER button.  
5. Press the Start/Stop button again when you wish to stop recording.  
œ
[ Notes ]  
Do not obstruct the remote control sensor by putting obstacles between the remote control and  
Camcorder.  
The remote control range is 4 ~5m (13 ~17 ft).  
The effective remote control angle is up to 30 degrees left /right from the center line.  
Using a tripod is recommended for delayed recording.  
œ
43  
ENGLISH  
Basic Recording  
Zooming In and Out  
The Zoom function works in both Camera and M.Cam modes.  
Zooming is a recording technique that lets you change the size of the subject in a scene.  
You can zoom using variable zoom speeds.  
Use these features for different shots. Please note that over-use of the Zoom feature can lead to unprofessional looking  
results and a reduction of battery usage time.  
1. Move the Zoom lever slightly for a gradual zoom, move it further  
for a high-speed zoom.  
TELE  
Your zooming is monitored on the OSD.  
2. T(Telephoto) side: Subject appears closer.  
3. W(Wide angle) side: Subject appears farther away.  
WIDE  
W
T
You can record a subject that is about 10mm (about 0.5 inch)  
away from the lens surface in the Wide position.  
Using the Tele Macro  
Tele Macro Function works in both Camera and M.Cam mode.  
Effective focal distance in tele macro mode is 50 Cm (19.7 inches) ~ 100 Cm (39.4 inches).  
1. Press the MACRO button.  
Tele Macro Icon ( ) will be displayed.  
2. If you want to cancel the Tele Macro function, press the MACRO button again.  
[ Notes ]  
When recording in Tele Macro mode, the focus speed may be slow.  
STBY  
SP  
When you operate the Zoom function in the Tele Macro mode, the recording subject  
0:39:40  
25min  
may be out of focus.  
Use a tripod to prevent hand shake in the Tele Macro mode.  
Avoid shadows when recording in the Tele Macro mode.  
As the distance to the subject decreases, focusing area narrows.  
When you can not get proper focus, use the Zoom lever.  
44  
ENGLISH  
Basic Recording  
Using the Fade In and Out  
The FADE function works only in Camera mode.  
You can give your recording a professional look by using special effects  
such as fade in at the beginning of a sequence or fade out at the end of  
a sequence.  
3
4
5
6
SP  
0:00:05  
60min  
STBY  
To Start Recording  
SP  
0:00:20  
60min  
REC  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Before recording, hold down the FADE button.  
The picture and sound gradually disappear (fade out).  
4. Press the Start/Stop button and at the same time  
release the FADE button.  
SP  
0:00:25  
REC  
60min  
Recording starts and the picture and sound gradually  
appear (fade in).  
To Stop Recording (use Fade In/Fade Out)  
SP  
0:00:30  
60min  
STBY  
5. When you wish to stop recording, hold down the  
FADE button.  
The picture and sound gradually disappear (fade out).  
6. When the picture has disappeared,  
press the Start/Stop button to stop recording.  
Hold down the FADE button  
a. Fade Out  
Gradual disappearance  
a. Fade Out  
(Approx. 4 seconds)  
b. Fade In  
(Approx. 4 seconds)  
Gradual appearance  
b. Fade In  
Release the FADE button  
45  
ENGLISH  
Basic Recording  
Using Back Light Compensation Mode (BLC)  
BLC works in both Camera and M.Cam modes.  
Back lighting exists when the subject is darker than the background:  
- The subject is in front of a window.  
- The person to be recorded is wearing white or shiny clothes and  
is placed against a bright background; the person’s face is too dark to  
distinguish his/her features.  
- The subject is outdoors and the background is overcast.  
- The light sources are too bright.  
- The subject is against a snowy background.  
<BLC off>  
<BLC on>  
3
4
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the BLC button.  
BLC icon ( ) will be displayed.  
4. To exit BLC mode, press the BLC button again.  
SP  
0:00:10  
60min  
STBY  
Each press of the BLC button toggles: Normal BLC Normal.  
[ Notes ]  
When NITE PIX to set to ON, the BLC function does not work. (SC-D352/D354/D355 only)  
The BLC function will not operate in EASY.Q mode.  
46  
ENGLISH  
Basic Recording  
Using the Color Nite Shutter  
COLOR NITE SHUTTER function works only in Camera mode.  
Shutter speed can be controlled, allowing you to record slow moving objects.  
COLOR NITE SHUTTER function may produce a brighter image.  
1
3
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the COLOR NITE SHUTTER button.  
4. Each time you press the COLOR NITE SHUTTER button, shutter speed is changed to;  
Color N. 1/30, Color N. 1/15 and off. (SC-D351/D353 only)  
Color N. 1/30, Color N. 1/15, Color N. 1/15( ) and off. (SC-D352/D354/D355 only)  
[ Notes ]  
The COLOR NITE SHUTTER will not turn ON or OFF while you are recording.  
When using COLOR NITE SHUTTER the image takes on a slow motion like effect.  
When using the COLOR NITE SHUTTER function, the focus adjusts slowly and the  
white dots may appear on the screen, this is not a defect.  
4
SP  
0:00:10  
60min  
STBY  
COLOR NITE SHUTTER is not available while DIS, Photo image recording or EASY.Q is in use.  
Digital Zoom, Photo image recording,16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic is not  
available in the COLOR NITE SHUTTER mode.  
If DIS or EASY.Q is set, COLOR NITE SHUTTER mode will be released.  
Color N.1/30  
47  
ENGLISH  
Basic Recording  
Using the Color Nite Shutter with LED Light (SC-D352/D354/D355 only)  
COLOR NITE SHUTTER function works only in Camera mode.  
The LED light enables you to record a subject in dark places without sacrificing color.  
The LED light can be used with COLOR NITE SHUTTER function only.  
1
3
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE.  
3. Press the COLOR NITE/LED LIGHT button until Color N. 1/15 ( ) appears on the display.  
[ Notes ]  
The COLOR NITE/LED LIGHT will not turn ON or OFF while you are recording.  
The range of the LED light is limited. (up to 6.6ft (2m))  
Danger  
The LED light can become extremely hot.  
Do not touch it while in operation or soon after turning it off, otherwise serious injury may result.  
Do not place the Camcorder into the carrying case immediately after using the LED light,  
SP  
0:00:10  
60min  
STBY  
since it remains extremely hot for some time.  
Do not use near flammable or explosive materials.  
Color N. 1/15  
48  
ENGLISH  
Basic Recording  
Nite Pix (0 lux recording) (SC-D352/D354/D355 only)  
The Nite Pix function works in both Camera and M.Cam modes.  
The Nite Pix function enables you to record a subject in darkness.  
1. Set the Power switch to CAMERA.  
1
3
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D354/D355 only)  
3. Slide the NITE PIX switch to ON.  
Nite Pix indicator ( ) appears on the LCD screen.  
The infrared light is turned on automatically.  
4. To cancel the Nite Pix function, slide the NITE PIX switch to OFF.  
[ Notes ]  
The maximum recording distance using the infrared light is about 3 m (about 10 feet).  
If you use the Nite Pix function in normal recording situations (ex. outdoors by day),  
the recorded picture may be tinted green.  
Nite Pix is not available while taking a photo image.  
In the Nite Pix mode, certain functions are not available, such as Exposure, White Balance,  
SP  
0:00:10  
60min  
STBY  
Program AE, Digital Effect and BLC.  
If focusing is difficult in the auto focus mode when using the Nite Pix function, focus manually.  
Do not cover the Infrared Light with your hand.  
Nite Pix  
Do not set the NITE PIX to ON in bright lighting. It might damage the CCD (Charge Coupled Device).  
49  
ENGLISH  
Basic Recording  
Power Nite Pix (SC-D352/D354/D355 only)  
The Power Nite Pix function works only in Camera mode.  
The Power Nite Pix function can record a subject more brightly in darkness than the Nite Pix function.  
When you work in Power Nite Pix mode, the Power Nite Pix icon remains on the LCD screen.  
Power Nite Pix is not available while taking a photo image or with EASY.Q is in use.  
1. Set the Power switch to CAMERA.  
1
3
2. Set the Mode switch to TAPE. (SC-D354/D355 only)  
3. Turn on the NITE PIX switch, and then press the COLOR NITE/LED LIGHT button.  
4. Press the COLOR NITE/LED LIGHT button to set shutter speed.  
When using Power Nite Pix, the image takes on a slow motion like effect.  
The slow shutter function enables you to record a subject more brightly.  
5. Each time you press the COLOR NITE/LED LIGHT button, the shutter speed changes to  
Color N. 1/30, Color N. 1/15, Color N. 1/15 ( ) and off in order.  
6. To cancel the Power Nite Pix function, press the COLOR NITE/LED LIGHT button to  
set to off and then turn off the NITE PIX switch.  
4
STBY  
SP  
0:00:10  
60min  
[ Notes ]  
The Power Nite Pix function will not turn ON or OFF while you are recording.  
The maximum recording distance using the infrared light is about 3 m (about 10 feet).  
If you use the Power Nite Pix function in normal recording situations (ex. outdoors by day),  
Power Nite Pix  
the recorded picture may contain unnatural colors.  
In the Power Nite Pix mode, certain functions are not available, such as Exposure, White Balance,  
Color N.1/15  
Program AE, Digital Effect, BLC, Digital Zoom and Manual Focus.  
50  
ENGLISH  
Advanced Recording  
Use of various Functions  
Setting menu items  
Available mode  
.
Main Menu  
Sub Menu  
Functions  
Page  
.
Player  
M Player  
Camera  
M Cam  
!
!
Camera  
Program AE  
Selecting the Program AE Function  
Setting White Balance  
63, 64  
59  
White Balance  
Digital Effect  
DIS  
Setting the Digital special effect  
Selecting the Digital Image Stabilizing  
Selecting Digital Zoom  
65, 66  
61  
Digital Zoom  
Photo Search  
Photo Copy  
Audio Select  
Rec Mode  
Audio Mode  
Wind Cut  
67  
Tape  
Searching pictures recorded in Tape  
Copying still images from a cassette to Memory card  
Selecting the Audio playback channel  
Selecting the recording speed  
Selecting Sound Quality for recording  
Minimizing wind noise  
68  
105  
78  
Record  
54  
55  
56  
AV In/Out  
@
Selecting the AV input/output  
Selecting the memory type  
76  
Memory  
Memory Type  
Photo Quality  
M.Play Select  
Delete  
#
90  
!
Selecting Image Quality  
91, 92  
103, 104  
99, 100  
99  
Selecting Storage Media (Photo, Movie) to playback  
Deleting Files  
Delete All  
Deleting All files  
Protect  
Preventing Accidental Erasure  
Print images recorded on a Memory Card  
Copying the image of Memory card to int. memory  
Formatting the Memory Card  
File Naming Options  
97, 98  
108, 109  
107  
Print Mark  
Copy To  
Format  
File No.  
#
101  
93  
(!): SC-D353/D354/D355 only  
(@): SC-D355 only  
(#): SC-D354/D355 only  
51  
ENGLISH  
Advanced Recording  
Available mode  
.
Main Menu  
Sub Menu  
Functions  
Page  
.
Player  
M Player  
Camera  
M Cam  
!
!
Display  
LCD Bright  
Setting the Brightness tone of the LCD screen  
Setting the Color tones of the LCD screen  
Setting the Date and Time  
Selecting OSD on/off of TV  
Setting the time  
32  
32  
33  
34  
27  
28  
29  
30  
83  
82  
26  
31  
LCD Color  
Date/Time  
TV Display  
Clock Set  
System  
Remote  
#
Using the remote control  
Beep Sound  
Shutter Sound  
USB Version  
USB Connect  
Language  
Setting the Beep sound  
!
Setting the Shutter sound  
Setting the USB Version  
Setting the USB  
$
$
Selecting the OSD language  
Demonstration  
Demonstration  
(!): SC-D353/D354/D355 only  
(#): SC-D354/D355 only  
($): SC-D352/D353/D354/D355 only  
52  
ENGLISH  
Advanced Recording  
Function availability in each Mode  
Requested  
Mode  
Digital Effects  
Digital functions  
Nite Pix  
!
Operating  
Mode  
the other  
Digital Effect  
PHOTO  
Color Nite  
Shutter  
16:9  
Wide  
Emboss2, Pastel2  
Mirror, Mosaic  
DIS  
Digital Zoom  
(TAPE)  
O
O
O
O
O
O
DIS  
Digital Zoom  
PHOTO(TAPE)  
Color Nite Shutter  
16:9 Wide  
Emboss2  
Pastel2  
Mirror  
Digital  
Effects  
O
Mosaic  
the other  
O
O
O
O
O
O
O
O
Digital Effect  
Nite Pix  
!
O : The requested mode will work in this operating mode.  
: You can not change the requested mode.  
: The requested mode will work.  
: The requested mode will work.  
(operating mode data will be backed up.)  
: This Function works on models SC-D352/D354/D355 only.  
!
[ Note ]  
When you select an item that cannot be changed, an error message will be displayed.  
53  
ENGLISH  
Advanced Recording  
Selecting the Record Mode  
The Record Mode function works in both Camera and Player (DV IN) modes.  
This Camcorder records and plays back in SP (standard play) mode and in LP (long play) mode.  
- SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.  
- LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
4
Camera Mode  
Record  
Rec Mode  
SP  
Audio Mode  
Wind Cut  
12Bit  
Off  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select Record, then press the Menu selector.  
6
Camera Mode  
Back  
5. Move the Menu selector to the left or right to select Rec Mode, then press the Menu  
Rec Mode  
Audio Mode  
Wind Cut  
SP  
LP  
selector.  
6. Move the Menu selector to the left or right to select desired record mode(SP or LP),  
then press the Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
7
STBY  
SP  
0:00:10  
60min  
The selected icon will be displayed.  
[ Notes ]  
We recommend that you use this Camcorder to play back any tapes recorded on this Camcorder.  
Playing back a tape recorded in other equipment may produce mosaic shaped distortion.  
When you record a tape in SP and LP modes, or LP mode only, the playback picture may be distorted  
or the time code may not be written properly if there is a gap between scenes.  
Record using SP mode for best picture and sound quality.  
54  
ENGLISH  
Advanced Recording  
Selecting Audio Mode  
The Audio Mode function works in both Camera and Player modes.  
This Camcorder records sound in two ways. (12Bit, 16Bit)  
- 12Bit: You can record two 12Bit stereo sound tracks.  
The original stereo sound can be recorded onto the Main (Sound1) track.  
Additional stereo sound can be dubbed onto the Sub (Sound2) track.  
- 16Bit: You can record one high quality stereo sound using the 16Bit recording mode.  
Audio dubbing is not possible when using this mode.  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
4
6
7
Camera Mode  
Record  
Rec Mode  
Audio Mode  
Wind Cut  
SP  
12Bit  
Off  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select Record, then press the Menu selector.  
Camera Mode  
Back  
5. Move the Menu selector to the left or right to select Audio Mode, then press  
Rec Mode  
Audio Mode  
Wind Cut  
12Bit  
16Bit  
the Menu selector.  
6. Move the Menu selector to the left or right to select desired audio mode(12Bit or 16Bit),  
then press the Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
SP  
0:00:10  
60min  
16Bit  
STBY  
[ Note ]  
When 12Bit is selected, no 12Bit indication will be displayed on the screen.  
55  
ENGLISH  
Advanced Recording  
Cutting Off Wind Noise (Wind Cut)  
The Wind Cut function works in both Camera and Player (Audio dubbing) modes.  
Use the Wind Cut when recording in windy places such as the beach or near buildings.  
The Wind Cut function minimizes wind noise or other noise while recording.  
- When the wind cut is on, some low pitched tones are eliminated along with the sound of the wind.  
1. Set the Power switch to CAMERA or PLAYER.  
4
Camera Mode  
Record  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
Rec Mode  
SP  
Audio Mode  
Wind Cut  
12Bit  
Off  
4. Move the Menu selector to the left or right to select Record, then press the Menu selector.  
MENU  
Move  
Select  
Exit  
5. Move the Menu selector to the left or right to select Wind Cut, then press the Menu  
6
Camera Mode  
Back  
selector.  
Rec Mode  
Audio Mode  
Wind Cut  
Off  
On  
6. To activate the Wind Cut function, move the Menu selector to the left or right to select On,  
then press the Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
Wind Cut (  
) icon will be displayed on the LCD screen when you turn the Wind Cut On.  
7
STBY  
SP  
0:00:10  
60min  
[ Note ]  
Make sure Wind Cut is set to off when you want the microphone to be as sensitive as possible.  
56  
ENGLISH  
Advanced Recording  
Setting the Shutter Speed & Exposure  
You can set Shutter Speed only in Camera mode.  
The Exposure function works in both Camera and M.Cam modes.  
Quick menu is used to access Camcorder functions by simply using the Menu selector.  
3
SP  
0:00:10  
60min  
STBY  
1. Set the Power switch to CAMERA.  
DIS  
Off  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the Menu selector.  
Quick menu list will appear.  
4. Move the Menu selector to the left or right to select Shutter or Exposure, then press the  
Menu selector.  
Program AE  
White Balance  
Shutter  
Exposure  
Manual Focus  
MENU  
Exit  
5. Move the Menu selector to the left or right to select Manual, then press the Menu selector.  
6. Move the Menu selector to the left or right to select desired shutter speed or exposure,  
then press the Menu selector.  
SP  
0:00:10  
60min  
STBY  
5
6
DIS  
Program AE  
White Balance  
Shutter  
Shutter speed can be set to 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000 or 1/10000.  
Exposure value can be set between 00 and 29.  
Manual  
Exposure  
Manual Focus  
7. To exit, press the MENU button.  
MENU  
Selected settings are displayed on the screen.  
Exit  
Recommended Shutter Speeds when Recording  
Outdoor sports such as golf or tennis: 1/2000 or 1/4000  
Moving cars or trains or other rapidly moving vehicles such as roller coasters: 1/1000, 1/500 or  
S. 1/60  
1/250  
Indoor sports such as basketball: 1/100  
[29]  
[ Notes ]  
If you manually change the Shutter Speed and the Exposure value when Program AE option is selected, manual changes are  
applied first.  
The image may not seem as smooth when a high Shutter Speed is set.  
The Camcorder returns to the auto shutter and auto exposure settings when you set the NITE PIX to ON,  
or change to the EASY.Q mode. (SC-D352/D354/D355 only)  
When recording with a Shutter Speed of 1/1000 or higher, make sure the sun is not shining into the lens.  
57  
ENGLISH  
Advanced Recording  
Auto Focus/Manual Focus  
The Auto Focus/Manual Focus function works in both Camera and M.Cam modes.  
In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side  
of your recording.  
Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable.  
Manual Focus can be set in the Quick Menu.  
a
b
Auto Focusing  
If you are inexperienced in the use of Camcorders, we recommend that you make use  
of Auto Focus.  
Manual Focusing  
c
d
In the following situations, you may obtain better results by adjusting the focus manually.  
a. A picture containing several objects, some close to the Camcorder,  
others further away.  
b. A person enveloped in fog or surrounded by snow.  
c. Very shiny or glossy surfaces like a car.  
4
5
SP  
0:00:10  
60min  
STBY  
DIS  
Program AE  
White Balance  
Shutter  
d. People or objects moving constantly or quickly like an athlete or a crowd.  
Exposure  
Manual Focus  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
3. Press the Menu selector.  
4. Move the Menu selector to the left or right to select Manual Focus, then press the Menu  
selector.  
On  
MENU  
Exit  
SP  
0:00:10  
60min  
STBY  
5. Move the Menu selector to the left or right to select On, then press the Menu selector.  
M.Focus(  
) icon will blink.  
6. Move the Menu selector to the left or right until the object is in focus.  
[ Note ]  
Manual Focus is not available in the EASY.Q mode.  
58  
ENGLISH  
Advanced Recording  
Setting the White Balance  
The White Balance function works in both Camera and M.Cam modes.  
The White Balance is a recording function that preserves the unique image color of the object in any recording condition.  
You may select the appropriate White Balance mode to obtain good quality image color.  
A
Auto ( ): This mode is generally used to control the White Balance automatically.  
Hold ( ):This holds the current White Balance value.  
Indoor ( ): This controls the White Balance according to the indoor ambience.  
- Under halogen or studio/video lighting  
- Subject is of one dominant color  
- Close up  
4
Camera Mode  
Camera  
Program AE  
White Balance  
Digital Effect  
DIS  
Auto  
Auto  
Off  
Outdoor ( ): This controls the White Balance according to the outdoor ambience.  
- In daylight, especially for close up and where the subject is of one dominant color.  
Off  
Digital Zoom  
Off  
1. Set the Power switch to CAMERA.  
MENU  
Move  
Select  
Exit  
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)  
6
7
Camera Mode  
Back  
3. Press the MENU button.  
Program AE  
White Balance  
Digital Effect  
DIS  
Auto  
A
The menu list will appear.  
Hold  
Indoor  
Outdoor  
Digital Zoom  
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.  
MENU  
Move  
Select  
Exit  
5. Move the Menu selector to the left or right to select White Balance, then press the  
Menu selector.  
SP  
0:00:10  
60min  
STBY  
6. Move the Menu selector to the left or right to select desired mode(Auto, Hold, Indoor or  
Outdoor), then press the Menu selector.  
7. To exit, press the MENU button.  
When the Auto mode is selected, no icon will be displayed on the screen.  
<When the Outdoor option was selected>  
59  
ENGLISH  
Advanced Recording  
Using Quick Menu: White Balance  
Quick menu is used to access Camcorder functions by using the Menu selector.  
Quick menu provides easier access to frequently used menus without using the MENU button.  
1. Press the Menu selector.  
1
3
4
SP  
0:00:10  
60min  
STBY  
2. Move the Menu selector to the left or right to select White Balance, then press the  
DIS  
Off  
Program AE  
White Balance  
Shutter  
Menu selector.  
Exposure  
Manual Focus  
3. Move the Menu selector to the left or right to select desired mode(Auto, Hold, Indoor or  
MENU  
Outdoor), then press the Menu selector.  
Exit  
4. To exit, press the MENU button.  
SP  
0:00:10  
60min  
STBY  
DIS  
Program AE  
White Balance  
Shutter  
[ Notes ]  
Auto  
A
When NITE PIX is set to ON, the White Balance function does not work. (SC-D352/D354/D355 only)  
Exposure  
Manual Focus  
The White Balance function will not operate in EASY.Q mode.  
MENU  
Exit  
Turn the Digital Zoom off (if necessary) to set a more accurate white balance.  
Reset the white balance if lighting conditions change.  
During normal outdoor recording, setting to Auto may provide better results.  
SP  
0:00:10  
60min  
STBY  
<When the Outdoor option was selected>  
60  
ENGLISH  
Advanced Recording  
Setting the Digital Image Stabilizer (DIS)  
The DIS function works only in Camera mode.  
DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the  
Camcorder (within reasonable limits).  
It provides more stable pictures when:  
- Recording with the zoom (DIS is not available in Digital Zoom mode.)  
- Recording a small object close-up  
- Recording and walking at the same time  
- Recording through the window of a vehicle  
4
Camera Mode  
Camera  
Program AE  
White Balance  
Auto  
Auto  
Off  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
Digital Effect  
DIS  
Off  
Digital Zoom  
Off  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.  
5. Move the Menu selector to the left or right to select DIS, then press the Menu selector.  
6. To activate the DIS function, move the Menu selector to the left or right to select On,  
then press the Menu selector.  
6
7
Camera Mode  
Back  
Program AE  
White Balance  
Digital Effect  
DIS  
If you do not want to use the DIS function, set the DIS menu to Off.  
Off  
On  
7. To exit, press the MENU button.  
Digital Zoom  
DIS(  
) icon is displayed on the LCD screen.  
MENU  
Move  
Select  
Exit  
[ Notes ]  
SP  
0:00:10  
60min  
STBY  
Digital Zoom, COLOR NITE SHUTTER, 16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic is  
not available in the DIS mode.  
When you press the PHOTO button while the DIS function is enabled, the DIS will be released  
shortly and resume automatically after the photo recording.  
61  
ENGLISH  
Advanced Recording  
Using Quick Menu: Digital Image Stabilizer(DIS)  
Quick menu is used to access Camcorder functions by simply using the Menu selector.  
Quick menu provides easier access to the frequently used menus without using the MENU button.  
1. Press the Menu selector twice.  
1
SP  
0:00:10  
60min  
STBY  
DIS  
Off  
2. Move the Menu selector to the left or right to select On or Off, then press the Menu selector.  
3. To exit, press the MENU button.  
Program AE  
White Balance  
Shutter  
Exposure  
Manual Focus  
MENU  
Exit  
[ Notes ]  
It is recommended that you deactivate the DIS function when using a tripod.  
If you use the DIS function, the picture quality may deteriorate.  
EASY.Q mode automatically sets the DIS to On.  
2
SP  
0:00:10  
60min  
STBY  
On  
DIS  
Program AE  
White Balance  
Shutter  
Exposure  
Manual Focus  
MENU  
Exit  
SP  
0:00:10  
60min  
STBY  
62  
ENGLISH  
Advanced Recording  
Programmed Automatic Exposure Modes (Program AE)  
The Program AE function works only in Camera mode.  
The Program AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions.  
They give you creative control over the depth of field.  
A
Auto mode (  
)
SP  
0:00:10  
60min  
STBY  
- Auto balance between the subject and the background.  
- To be used in normal conditions.  
- The shutter speed automatically varies from 1/60 to 1/250 per second, depending on the scene.  
Sports mode (  
For recording people or objects moving quickly.  
)
Portrait mode (  
)
- For focusing on the background of the subject, when the background is out of focus.  
- The Portrait mode is most effective when used outdoors.  
- The shutter speed automatically varies from 1/60 to 1/1000 per second.  
Spotlight mode (  
)
For recording correctly when there is only light on the subject and not the rest of the picture.  
Sand/Snow mode (  
)
For recording when people or objects are darker than the background because of reflected light from sand or snow.  
High Speed(High Shutter Speed) mode (  
)
For recording fast-moving subjects such as players in golf or tennis games.  
[ Notes ]  
While setting the NITE PIX to ON, the Program AE function does not work. (SC-D352/D354/D355 only)  
The Program AE function will not operate in EASY.Q mode.  
63  
ENGLISH  
Advanced Recording  
Setting the Program AE  
1. Set the Power switch to CAMERA.  
4
6
Camera Mode  
Camera  
Program AE  
White Balance  
Digital Effect  
DIS  
Auto  
Auto  
Off  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
Off  
3. Press the MENU button.  
Digital Zoom  
Off  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.  
Camera Mode  
Back  
5. Move the Menu selector to the left or right to select Program AE, then press the Menu selector.  
Program AE  
White Balance  
Digital Effect  
DIS  
Auto  
A
Sports  
Portrait  
Spotlight  
The available options are listed.  
Digital Zoom  
Sand/Snow  
High Speed  
6. Move the Menu selector to the left or right to select desired program AE option, then press the  
Menu selector.  
MENU  
Move  
Select  
Exit  
7. To exit, press the MENU button.  
1
3
The icon of the selected mode will be displayed on the LCD screen.  
When the Auto mode is selected, no icon will be displayed on the screen.  
SP  
0:00:10  
60min  
STBY  
DIS  
Off  
Program AE  
White Balance  
Shutter  
Using Quick Menu: Program AE  
Exposure  
Manual Focus  
1. Press the Menu selector.  
MENU  
Exit  
2. Move the Menu selector to the left or right to select Program AE, then press  
SP  
0:00:10  
60min  
STBY  
the Menu selector.  
DIS  
Program AE  
White Balance  
Shutter  
Auto  
A
3. Move the Menu selector to the left or right to select desired program AE option,  
then press the Menu selector.  
Exposure  
Manual Focus  
MENU  
Exit  
4. To exit, press the MENU button.  
64  
ENGLISH  
Advanced Recording  
Applying Digital Effects  
The Digital Effect function works only in Camera mode.  
The Digital Effects enable you to give a creative look to your recording.  
Select the appropriate Digital Effect for the type of picture that you wish to record and the effect you wish to create.  
There are 11 Digital Effect modes.  
1
2
1. ART mode  
This mode gives the images a coarse effect.  
2. Mosaic mode  
This mode gives the images a mosaic effect.  
3
4
3. Sepia mode  
This mode gives the images a reddish-brown pigment.  
4. Negative mode  
This mode reverses the colors, creating a negative image.  
5
7
6
8
5. Mirror mode  
This mode cuts the picture in half, using a mirror effect.  
6. BLK & WHT mode  
This mode changes the images to black and white.  
7. Emboss1 mode  
This mode creates a 3D effect (embossing).  
8. Emboss2 mode  
This mode creates a 3D effect (embossing) on surrounding area of an image.  
9. Pastel1 mode  
9
10  
This mode applies a pale pastel drawing effect to an image.  
10. Pastel2 mode  
This mode applies a pale pastel drawing effect to surrounding area of an image.  
11. 16:9 Wide mode  
11  
Select to record a picture to be played back on a 16:9 Wide TV.  
65  
ENGLISH  
Advanced Recording  
Selecting the Digital Effects  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Digital Effect, then press the  
Menu selector.  
6. Move the Menu selector to the left or right to select the desired Digital Effect mode,  
then press the Menu selector.  
The display mode is set to the selected mode.  
7. To exit, press the MENU button.  
4
6
Camera Mode  
Camera  
Program AE  
White Balance  
Digital Effect  
DIS  
Auto  
Auto  
Off  
Off  
[ Notes ]  
Digital Zoom  
Off  
The Pastel2, Emboss2, 16:9 Wide, Mirror or Mosaic modes are not available while DIS or  
MENU  
Move  
Select  
Exit  
COLOR NITE SHUTTER is in use.  
Digital Effect modes are not available while EASY.Q or NITE PIX is in use.  
Once DIS, EASY.Q or COLOR NITE SHUTTER is set, 16:9 Wide, Emboss2, Pastel2, Mirror or  
Camera Mode  
Back  
Mosaic modes will be released.  
Digital Zoom is not available in the 16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic modes.  
Program AE  
White Balance  
Digital Effect  
DIS  
Off  
Art  
Mosaic  
Sepia  
Negative  
Digital Effect modes other than 16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic are available while  
DIS is in use.  
Digital Zoom  
Mirror  
Setting the NITE PIX while Digital Effect is in use releases the Digital Effect, and releasing the  
MENU  
Move  
Select  
Exit  
NITE PIX will set the Digital Effect to Off mode.  
Photo image recording is not available in the 16:9 Wide mode.  
66  
ENGLISH  
Advanced Recording  
Zooming In and Out with Digital Zoom  
Zoom works only in Camera mode.  
Selecting the Digital Zoom  
Zooming more than 20x is achieved digitally, up to 900x when combined with optical zoom.  
The picture quality may deteriorate depending on how much you zoom in on the subject.  
We recommend that you use the DIS feature with Digital Zoom for picture stability. (see page 61)  
1
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
The menu list will appear.  
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Digital Zoom, then press the Menu  
selector.  
6. Move the Menu selector to the left or right to select desired zoom mode(Off, 100x, 200x,  
400x or 900x), then press the Menu selector.  
4
6
Camera Mode  
Camera  
Program AE  
White Balance  
Digital Effect  
DIS  
Auto  
Auto  
Off  
7. To exit, press the MENU button.  
Off  
Digital Zoom  
Off  
[ Notes ]  
MENU  
Maximum zooming may result in lower picture quality.  
Move  
Select  
Exit  
Digital Zoom is not available while DIS, EASY.Q, taking a photo image, COLOR NITE SHUTTER,  
16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic is in use.  
Once taking a photo image, COLOR NITE SHUTTER, 16:9 Wide, Emboss2, Pastel2, Mirror or  
Camera Mode  
Back  
Program AE  
White Balance  
Digital Effect  
DIS  
Mosaic is set, Digital Zoom mode will be released. (The Digital Zoom mode will be backed up.)  
Once DIS or EASY.Q is set, Digital Zoom mode will be released.  
Off  
100x  
200x  
400x  
900x  
Digital Zoom  
MENU  
Move  
Select  
Exit  
67  
ENGLISH  
Advanced Recording  
Photo Image Recording  
Photo image recording works only in Camera mode.  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the PHOTO button.  
The still picture is recorded for about 6~7 seconds.  
4. After the PHOTO has been recorded, the Camcorder returns to its previous mode.  
Searching for a Photo Image  
The Photo Search works only in Player mode.  
4
6
Player Mode  
Tape  
Photo Search  
Photo Copy  
Audio Select  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the MENU button.  
Sound[1]  
The menu list will appear.  
4. Move the Menu selector to the left or right to select Tape, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Photo Search, then press the Menu  
selector.  
MENU  
Move  
Select  
SP  
Exit  
0:41:56:10  
25min  
6. Press the  
/
(REW/FF) buttons to select the photo.  
Photo Search  
The photo search process appears on LCD screen while you are searching.  
After completing the search, the Camcorder displays the still image.  
7. To exit, press the (STOP) or MENU button.  
[ Notes ]  
œœ /√√  
MENU  
Search  
Cancel  
SP  
Exit  
Pressing the PHOTO button while recording, stops the recording and saves the still image captured  
at that moment. It takes approx. 6 ~7 seconds to save the image and then recording resumes.  
You can use the remote control to take a photo by using the PHOTO button on the remote control.  
0:44:38:03  
25min  
Photo Search  
Pressing the PHOTO button on the remote control records the still image at once with automatic  
focusing. (SC-D354/D355 only)  
When there are no still images recorded on the tape, it will be fully rewound or forwarded.  
Taking a photo image is not available while COLOR NITE SHUTTER or 16:9 Wide is in use.  
DIS, Digital Zoom, COLOR NITE SHUTTER, Digital Effect and Nite Pix are not available,  
Photo searching...  
when take a photo image.  
Taking a photo image while EASY.Q, DIS or Digital Zoom mode is in use will the mode.  
œœ /√√  
MENU  
Search  
Cancel  
Exit  
(After a photo image is taken, the mode will return automatically.)  
68  
ENGLISH  
Playback  
Playing Back a Tape You have recorded on the LCD Screen  
The playback function works only in Player mode.  
You can monitor the playback picture on the LCD screen.  
1. Set the Power switch to PLAYER.  
1
3
5
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Insert the tape you wish to view. (see page 36)  
4. Open the LCD screen.  
Adjust the angle of the LCD screen and set the brightness or color if necessary.  
5. Press the  
(REW) button to rewind the tape to the starting point.  
(STOP) button.  
The Camcorder stops automatically after rewinding is complete.  
To stop rewinding, press the  
6. Press the  
(PLAY/STILL) button to start playback.  
You can view the picture you recorded on the LCD screen.  
To stop the play operation, press the  
(STOP) button.  
Adjusting the LCD Bright/Color during Playback  
You can adjust the LCD Bright/Color during playback.  
The adjustment method is the same procedure as used in Camera mode. (see page 32)  
[ Notes ]  
You can also view the picture on a TV screen, after connecting the Camcorder to a TV or VCR. (see page 71~72)  
Various functions are available in Player mode. (see page 73)  
For searching and viewing still images recorded onto tape. (see page 68)  
69  
ENGLISH  
Playback  
Controlling Sound from the Speaker  
The Speaker works only in Player mode.  
When you use the LCD screen for playback, you can hear recorded sound from the built-in Speaker.  
- Take the following steps to lower the volume or mute the sound while playing a tape  
on the Camcorder.  
3
4
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the  
(PLAY/STILL) to play the tape.  
4. When you hear sounds once the tape is in play, use the Menu selector to adjust the volume.  
A volume level display will appear on the LCD screen.  
Levels may be adjusted from anywhere between 00 to 19 and you will not hear any sound  
when the volume is set on 00.  
If you close the LCD screen while playing, you will not hear sound from the speaker.  
[ Notes ]  
When the AV cable is connected to the Camcorder, you cannot hear sound from the Built-In Speaker  
SP  
0:46:00:11  
60min  
and cannot adjust the volume.  
The sound will return when you remove the connected AV cable from the jack of your Camcorder.  
[05]  
70  
ENGLISH  
Playback  
Tape Playback  
The playback function works only in Player mode.  
Playback on the LCD Screen  
It is practical to view a tape using the LCD screen when in a car or outdoors.  
Playback on a TV Monitor  
To play back a tape, the television must be NTSC compatible.(see page 114)  
We recommend that you use the AC Power adapter as the power source for the Camcorder.  
Connecting to a TV which has Audio/Video Input Jacks  
1. Connect the Camcorder to your TV with the Audio/Video cable.  
S-Video input  
Video input-Yellow  
Audio input  
(left)-White  
Camcorder  
The yellow jack: Video  
The white jack: Audio(L)-mono  
TV  
Audio input  
(right)-Red  
The red jack: Audio(R)  
If you connect to a monaural TV, connect the yellow jack (Video)  
to the video input of the TV and the white jack (Audio L) to the audio input  
of the TV.  
Audio/Video  
S-Video  
2. Set the Power switch to PLAYER.  
3. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
4. Turn on the TV and set the TV/VIDEO selector on the TV to Video.  
Refer to the TV user’s manual.  
5. Play the tape.  
[ Notes ]  
You may use an S-Video (optional) cable to obtain better quality pictures if you have a S-Video connector on your TV.  
Even if you use an S-Video (optional) cable, you need to connect an audio cable.  
If you connect the cable to the Audio/Video jack, you will not hear sound from the Camcorder's speakers.  
If only a mono audio input is available on the TV set, use the audio cable with the white jack(Audio L).  
71  
ENGLISH  
Playback  
Connecting to a TV which has no Audio and Video Input Jacks  
You can connect your Camcorder to a TV through a VCR.  
Video input-Yellow  
Audio input  
(left)-White  
1. Connect the Camcorder to your VCR with the Audio/Video cable.  
S-Video input  
VCR  
The yellow jack: Video  
The white jack: Audio(L) - Mono  
Audio input  
(right)-Red  
Camcorder  
The red jack: Audio(R)  
2. Connect a TV to the VCR.  
TV  
3. Set the Power switch to PLAYER.  
4. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
5. Turn on both the TV and VCR.  
Audio/Video  
Antenna  
S-Video  
Set the input selector on the VCR to Line.  
Select the channel reserved for your VCR on the TV set.  
6. Play the tape.  
Playback  
You can play the recorded tape in Player mode.  
1. Connect a power source and set the Power switch to PLAYER.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Insert the tape you wish to play back.  
4. Using the  
5. Press the  
/
(REW/FF) buttons, find the first position you wish to play back.  
(PLAY/STILL) button.  
The images you recorded will appear on the TV after a few seconds.  
If a tape reaches its end while being played back, the tape will rewind automatically.  
[ Notes ]  
The playback mode (SP/LP) is selected automatically.  
If the VCR has an S-Video input terminal, you may use S-Video for better quality.  
The S-Video terminal transmits video only. Connect audio cables for sound.  
If only a mono audio input is available on the TV set, use the audio cable with the white jack(Audio L).  
72  
ENGLISH  
Playback  
Various Functions while in Player Mode  
This function works only in Player mode.  
The PLAY, STILL, STOP, FF, REW buttons are located on the Camcorder and the remote control. (SC-D354/D355 only)  
The F.ADV(Frame advance), X2, SLOW buttons are located on the remote control only. (SC-D354/D355 only)  
To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow modes for more than  
3 minutes.  
Playback Pause  
Press the  
(PLAY/STILL) button during playback.  
To resume playback, press the (PLAY/STILL) button.  
Picture Search (Forward/Reverse)  
Press the  
To resume normal playback, press the  
Keep pressing (REW/FF) buttons during playback or still mode.  
To resume normal playback, release the button.  
/
(REW/FF) buttons during playback or still mode.  
(PLAY/STILL) button.  
œ
/
Slow Playback (Forward/Reverse) (SC-D354/D355 only)  
Forward Slow playback  
- Press the SLOW button on the remote control during playback.  
œ
œ
- To resume normal playback, press the  
Reverse Slow Playback  
(PLAY/STILL) button.  
<SC-D354/D355 only>  
- Press the  
(-) button during forward slow play back.  
- To resume forward slow playback, press the  
- To resume normal playback, press the  
(+) button.  
(PLAY/STILL) button.  
73  
ENGLISH  
Playback  
Frame Advance (To play back frame by frame) (SC-D354/D355 only)  
Press the F.ADV button on the remote control while in still mode.  
- Video sequence advances frame by frame each time you press the F.ADV button.  
- The F.ADV function works in still mode only.  
To resume normal playback, press the  
- Forward frame advance  
(PLAY/STILL) button.  
œ
Press the F.ADV button on the remote control in still mode.  
- Reverse frame advance  
Press the  
(-) button on the remote control to change the direction in F.ADV mode.  
Press the F.ADV button on the remote control.  
œ
X2 Playback (Forward/Reverse) (SC-D354/D355 only)  
Forward X2 playback  
<SC-D354/D355 only>  
- Press the X2 button on the remote control during playback.  
- To resume normal playback, press the  
Reverse X2 playback  
(PLAY/STILL) button.  
- Press the  
(-) button during forward X2 playback.  
- To resume normal playback, press the  
(PLAY/STILL) button.  
Reverse Playback (SC-D354/D355 only)  
To playback in reverse at normal speed, press the  
(-) button during normal forward playback.  
Press the (PLAY/STILL) or (+) button to return to normal forward playback.  
[ Notes ]  
Mosaic shaped distortion may appear on the screen while in some of the various playback modes.  
Mosaic shaped distortion or noise may be experienced when you play back tapes recorded in LP which contain various playback  
functions.  
Sound will only be heard during normal SP or LP playback.  
74  
ENGLISH  
Playback  
Zooming during Playback (PB ZOOM)  
The Playback Zoom function works in Player mode.  
The Playback Zoom function enables you to magnify the playback or still image.  
1. Set the Power switch to PLAYER.  
3
5
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Press the PB ZOOM button in playback mode or in still mode.  
4. The image is magnified starting from the center of image.  
5. You can zoom in from 1.2x to 8.0x by moving the Zoom lever.  
Zoom ratio is not displayed on the screen.  
6. To cancel the playback Zoom function, press the PB ZOOM or (STOP) button.  
[ Notes ]  
The PB ZOOM function enlarges the center of the screen only.  
You cannot apply the Playback Zoom function to pictures which are being input from  
an external video source.  
The Playback Zoom image cannot be imported to your PC from the Camcorder’s DV jack.  
The PB ZOOM images cannot be exported to a PC.  
OSD will not be displayed on the LCD screen while the PB ZOOM function is being operated.  
To display OSD, press the PB ZOOM button once to stop operating PB ZOOM function, or press the (STOP) button to stop  
playback.  
75  
ENGLISH  
Playback  
AV In/Out (SC-D355 only)  
AV In/Out function works only in Player mode.  
AV in/out setting enables you to record signal from external sources and display it on LCD screen.  
Also, you can direct your video or image to external devices to record or play back.  
1. Connect the Camcorder to your VCR or TV with the Audio/Video cable. (See pages 71~72)  
2. Set the Mode switch to TAPE.  
1
3. Set the Power switch to PLAYER.  
4. Turn on the VCR or TV.  
5. Insert the blank tape with protection tab closed into the Camcorder.  
If you want to record from a connected VCR, insert a recorded VHS tape into the VCR.  
6. Press the MENU button.  
The menu list will appear.  
7. Move the Menu selector to the left or right to select Record, then press the Menu selector.  
8. Move the Menu selector to the left or right to select AV In/Out, then press the  
Menu selector.  
7
9
Player Mode  
Record  
Rec Mode  
Audio Mode  
Wind Cut  
SP  
9. Move the Menu selector to the left or right to select In, then press the Menu selector.  
12Bit  
Off  
If you want to see the Camcorder picture with a TV, set AV In/Out menu to Out.  
AV In/Out  
Out  
10. To exit, press the MENU button.  
11. Press the Start/Stop button to set the Camcorder to REC PAUSE mode.  
MENU  
Move  
Select  
Exit  
PAUSE appears on the LCD screen.  
12. Select the TV program or playback the VHS tape.  
13. Press the Start/Stop button to start recording.  
Player Mode  
Back  
If you want to pause recording for a while, press the Start/Stop button again.  
Rec Mode  
Audio Mode  
Wind Cut  
AV In/Out  
14. To stop recording, press the  
(STOP) button.  
Out  
In  
[ Note ]  
MENU  
Move  
Select  
Exit  
When you record the images being played back on an analog VCR, if they are not being played back  
at normal speed, (for example, more than double speed or slow playback), only a gray image appears on  
the Camcorder.  
76  
ENGLISH  
Playback  
Audio Dubbing (SC-D354/D355 only)  
The Audio Dubbing function works only in Player Mode.  
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.  
You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.  
Use the internal or an external microphone(not supplied) or other audio equipment.  
The original sound will not be erased.  
Dubbing Sound  
1. Set the Power switch to PLAYER.  
1
If you want to use an external microphone, connect the microphone to  
DV  
USB  
the external MIC input jack on the Camcorder.  
AV  
MIC  
2. Set the Mode switch to TAPE.  
3. Press the  
be dubbed.  
(PLAY/STILL) button and find the time frame of the scene to  
4. Press the  
(PLAY/STILL) button to pause the scene.  
3
4
5
5. Press the A.DUB button on the remote control.  
Audio Dubbing icon ( ) will be displayed on the LCD screen.  
The Camcorder is ready for dubbing.  
6. Press the  
(PLAY/STILL) button to start dubbing.  
Press the (STOP) button to stop the dubbing.  
[ Notes ]  
You can not use the Audio Dubbing function while playing a write protected video tape.  
To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable to connect  
external sound source input.  
To dub an external sound source, set the AV In/Out function to AV In (SC-D355 only). (see page 76).  
77  
ENGLISH  
Playback  
Dubbed Audio Playback  
1. Set the Power switch to PLAYER.  
4
6
7
Player Mode  
Tape  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
Photo Search  
Photo Copy  
Audio Select  
Sound[1]  
3. Insert the dubbed tape and press the MENU button.  
4. Move the Menu selector to the left or right to select Tape, then press the Menu selector.  
MENU  
Move  
Select  
Exit  
5. Move the Menu selector to the left or right to select Audio Select, then press the Menu  
Player Mode  
Back  
selector.  
Photo Search  
Photo Copy  
Audio Select  
6. Move the Menu selector to the left or right to select the audio playback channel, then press  
Sound[1]  
Sound[2]  
MIX[1+2]  
the Menu selector.  
Sound[1]: play the original sound.  
Sound[2]: play the dubbed sound.  
MIX[1+2]: play back sound1 and 2 equality mixed.  
MENU  
Move  
Select  
SP  
Exit  
0:01:53:10  
20min  
Sound[2]  
7. To exit, press the MENU button.  
8. Press the  
(PLAY/STILL) button to playback the dubbed tape.  
[ Note ]  
When you playback added sound (Sound 2 or MIX mode), you may experience a loss of sound quality.  
78  
ENGLISH  
IEEE 1394 Data Transfer  
Transferring IEEE1394 (i.LINK)-DV Standard Data Connections  
Connecting to a DV Device (DVD Recorder, Camcorder, etc.)  
Connecting to other DV standard products.  
A standard DV connection is quite simple.  
If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable.  
!!! Please be careful since there are two types of DV ports, (4pin, 6pin). This Camcorder has a 4pin terminal.  
With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images  
to be transferred.  
Connecting to a PC  
If you want to transmit data to a PC, you must install an IEEE 1394 add-on card into the PC. (not supplied)  
The frame rate for video capture is dependent on the capacity of the PC.  
[ Notes ]  
When you transmit data from the Camcorder to another DV device, some functions may not work.  
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.  
When you transmit data from the Camcorder to PC, PC function button is not available in M.Player mode.  
Do not use the Camcorder and IEEE1394 together as this will cause IEEE1394 to shut off.  
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.  
Operation is not guaranteed for all computer environments recommended above.  
The IEEE1394 cable (DV cable)is sold separately.  
Video Capture software is commercially available.  
Most DV enabled PCs have a 6 pin socket. In this case, a 6pin/4pin cable is required for the connection.  
Most DV enabled Notebooks and Laptops have a 4 pin socket. Use a 4pin/4pin cable for the connection.  
DIS and COLOR NITE SHUTTER are not available when in DV (IEEE1394) mode.  
If DV(IEEE1394) mode is set, DIS and COLOR NITE SHUTTER modes will be released.  
79  
ENGLISH  
IEEE 1394 Data Transfer  
System Requirements  
CPU: faster Intel® Pentium III™ 450MHz compatible.  
Operating system: Windows® 98SE, ME, XP, Mac OS (9.1~10.2)  
Main memory: more than 64 MB RAM  
IEEE1394 add-on card or built in IEEE1394 card  
Recording with a DV Connection Cable  
1. Set the Power switch to PLAYER.  
DV  
DV  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder  
USB  
USB  
A
V
MIC  
AV  
to the DV jack of the other DV device.  
MIC  
Make sure that  
is displayed on the LCD screen.  
4. Press the Start/Stop button to begin REC PAUSE mode.  
PAUSE is displayed on the LCD screen.  
5. Start playback on the other DV device while you monitor the picture.  
6. Press the Start/Stop button to start recording.  
If you want to pause recording momentarily, press the Start/Stop button again.  
7. To stop recording, press the (STOP) button.  
[ Notes ]  
When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,  
however recorded pictures will not be affected.  
Operation is not guaranteed for all the recommended computer environments mentioned above.  
80  
ENGLISH  
USB Interface (SC-D352/D353/D354/D355 only)  
Transferring a Digital Image through a USB Connection  
The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)  
You can easily transfer a image from a Memory card to a PC without additional add-on cards via a USB connection.  
You can transfer a recorded file in memory card to a PC via a USB connection. (SC-D353/D354/D355 only)  
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec , DirectX 9.0) supplied with the  
Camcorder.  
USB Connection speed depending on the System  
High speed USB connection is supported by Microsoft (Windows) device drivers only.  
Windows 98SE/ME - Full Speed USB  
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.  
Windows XP - High speed USB on a system with Service Pack 1 or later installed.  
System Requirements  
Windows System  
Minimum  
Recommended  
CPU  
Intel® Pentium III™, 600MHz  
Windows® 98SE/ME  
128MB  
Intel® Pentium 4™ , 2GHz  
Windows® 2000/XP  
512MB  
OS(Operating System)  
Memory  
HDD capacity  
Resolution  
1GB or more  
2GB or more  
1024 x 768 dots  
24bit Color  
1024 x 768 dots  
24bit Color  
USB  
USB1.1  
USB2.0 High Speed  
It is not available for Macintosh systems.  
[ Notes ]  
USB 2.0 works only for removable disk functions.  
On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.  
On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.  
Intel® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.  
Windows® is a registered trademark of the Microsoft® Corporation.  
All other brands and names are property of their respective owners.  
Operations are not guaranteed for all of the recommended computer environments mentioned above.  
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.  
In M.Cam or M.Player mode, be sure that the Memory card is inserted into Camcorder before connecting USB cable.  
If no Memory card or an unformatted Memory card is inserted, PC will not recognize your Camcorder as a removable disk.  
(SC-D353/D354/D355 only)  
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.  
If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.  
If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly.  
If this occurs, remove all other USB devices and try the connection again.  
81  
ENGLISH  
USB Interface (SC-D352/D353/D354/D355 only)  
Selecting the USB Device (SC-D353/D354/D355 only)  
USB Select function works only in M.Player mode.  
Using the USB cable, you can connect your Camcorder to a computer to copy your movies and images from the Memory  
card (or built-in memory;SC-D354/D355), or to a printer to print your images.  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
1
The menu list will appear.  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
4
5
M.Player Mode  
System  
5. Move the Menu selector to the left or right to select USB Connect, then press the  
Clock Set  
Remote  
On  
Menu selector.  
Beep Sound  
USB Version  
USB Connect  
Language  
On  
USB 1.1  
Computer  
English  
6. Move the Menu selector to the left or right to select Computer or Printer, then press the  
Menu selector.  
MENU  
Move  
Select  
Exit  
You can select Computer to use the Camcorder as a PC Camera, USB Stream or  
removable disk.  
M.Player Mode  
Back  
You can select Printer to use the Pictbridge feature (see page 110).  
Clock Set  
Remote  
Beep Sound  
USB Version  
USB Connect  
Language  
7. To exit, press the MENU button.  
Computer  
Printer  
MENU  
Move  
Select  
Exit  
82  
ENGLISH  
USB Interface (SC-D352/D353/D354/D355 only)  
Setting the USB Communication Speed (SC-D353/D354/D355 only)  
To ensure proper communication between the camcorder and a PC, please set the USB Version before connecting  
the camcorder to a PC.  
It is available only in M.Cam and M.Player modes.  
1
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
The menu list will appear.  
4
5
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
M.Player Mode  
System  
Clock Set  
5. Move the Menu selector to the left or right to select USB Version, then press the  
Remote  
On  
Beep Sound  
USB Version  
USB Connect  
Language  
On  
Menu selector.  
USB 1.1  
Computer  
English  
Set the USB Version to USB 2.0 when it is supported by both PC and its  
OS (Operating System).  
If either the PC or OS does not support USB 2.0, set the USB Version to USB 1.1.  
MENU  
Move  
Select  
Exit  
M.Player Mode  
Back  
6. To exit, press the MENU button.  
Clock Set  
Remote  
Beep Sound  
USB Version  
USB Connect  
Language  
[ Notes ]  
USB 1.1  
USB 2.0  
When the USB Version is not set properly, the USB connection may not be established.  
USB 2.0 may not be supported by certain PCs depending on their specifications.  
MENU  
Move  
Select  
Exit  
In this case, choose the USB 1.1 for USB connection.  
When selected USB 2.0 is not supported by the PC, the USB 1.1 will be used for the USB connection  
automatically.  
83  
ENGLISH  
USB Interface (SC-D352/D353/D354/D355 only)  
Installing DV Media PRO 1.0 Program  
To play back MPEG moving pictures recorded by the camcorder or streaming data transferred through the USB connection  
on a PC, the Video Codec program should be installed.  
Do not connect the Camcorder to PC before installing the program.  
If another Camcorder or scanner is connected, please disconnect it in advance.  
This explanation is based on Windows® 98SE OS.  
DV Media Pro User's Manual is included on the accompanying CD(D:\help\) in  
Adobe's Portable Document Format(PDF) The user's manual can be viewed using  
Acrobat Reader software, which is also included on the CD  
( D:\Support\AcrobatReader\AcroReader51_ENU_full.exe).  
3
(The Acrobat Reader is a freeware product of AdobeSystems,Inc.)  
DV Media Pro User’s Manual is in English.  
Program Installation  
1. Insert the software CD into the CD-ROM drive of your computer.  
Installation selection screen appears on the monitor.  
2. If the installation selection screen does not appear after inserting the CD, click “Run”  
in the Windows “Start” menu and execute Autorun.exe file to begin installation.  
When CD-ROM drive is set to “D:drive”, type “D:\autorun.exe” and press Enter.  
3. Click the icons listed below to install the selected software.  
DV Driver Click  
- USB removable Disk Driver (Windows® 98SE only)  
- USB PC CAMERA & STREAMING Driver (CAPTURE DRIVER)  
- Connect a Camcorder to your PC to complete the DV Driver installation.  
1) Set the camcorder Power switch to CAMERA.  
2) Set the camcorder Mode switch to TAPE. (SC-D353/D354/D355 only)  
3) Connect the camcorder to the PC using the USB cable.  
4) The SAMSUNG A/V Capture driver installation begins on the PC.  
DirectX 9.0 Click  
Video Codec Click  
The Video Codec needs to be installed in order to playback the MPEG4 Movies (stored in the Memory Card) on a PC or  
to use the USB Streaming/PC Camera functions.  
84  
ENGLISH  
USB Interface (SC-D352/D353/D354/D355 only)  
Using the PC Camera Function  
To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.  
You can use this Camcorder as a PC CAMERA.  
When you connect to a Web site that provides video chatting functions, you can use your Camcorder for such functions.  
When using this camcorder for video conferencing (such as NetMeeting), voice communication may not be supported  
depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the PC to  
enable voice communication.  
Using the Camcorder with PC Net-meeting program installed, you can participate in video conference.  
The PC CAMERA's screen size (Transferred video frame rate for the PC Camera function is max 15 fps.)  
If PC is connected with the USB to the Camcorder, only the Power, Mode, Zoom and NITE PIX switches can be operated.  
(SC-D352/D354/D355 only)  
1. Set the Power switch to CAMERA.  
1
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to  
the USB connector on your computer.  
2
85  
ENGLISH  
USB Interface (SC-D352/D353/D354/D355 only)  
Using the USB Streaming Function  
To use USB streaming, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.  
You can view Camcorder video on your PC using USB streaming.  
You can also store it as a moving picture in the "avi" file format, or as a still image in the "jpg" file format on a PC.  
1. Set the Mode switch to TAPE(SC-D353/D354/D355 only), set the Power switch to CAMERA or PLAYER.  
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB port on your computer.  
3. Setup and execute Windows Movie Maker or the Ulead VIDEO Studio Software application provided on the CD.  
- For detailed instructions for Ulead VIDEO Studio use, refer to the program’s Help function.  
- Windows Movie Maker is used for WINDOWS ME and XP users. (C:\program files\Movie maker\moviemk.exe)  
Using the removable Disk Function (SC-D353/D354/D355 only)  
You can easily transfer data from a Memory card to a PC without additional add-on cards via a USB connection.  
1. Set the Mode switch to MEMORY CARD, set the Power switch to CAMERA or PLAYER.  
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB port on your computer.  
3. To verify whether the removable disk has been properly recognized, open Windows Explorer and locate the removable disk.  
Connecting to a PC  
1. Connect a USB cable to the USB port on the PC.  
If a USB cable is connected to the Camcorder's USB port, nothing is displayed on a TV.  
2. Connect the other end of the USB cable into the USB jack on the Camcorder. (USB jack)  
If a PC is connected to the Camcorder with a USB cable only, Zoom switch and  
NITE PIX (SC-D352/D354/D355 only) operate.  
USB Cable  
DV  
DV  
Disconnecting the USB Cable  
USB  
USB  
A
V
MIC  
After completing the data transmission, you must disconnect the cable in the  
following way:  
AV  
MIC  
1. Select the removable disc icon and click the right mouse button to select [Eject].  
2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen  
appears.  
[ Notes ]  
If you disconnect the USB cable from the PC or the Camcorder while transferring, the data transmission will stop and the data may  
be damaged.  
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the  
USB cable along with other USB devices, the Camcorder may not work properly.  
If this occurs, remove all USB devices from the PC and reconnect the Camcorder.  
86  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Memory Stick (Optional Accessory)  
The Memory Stick stores and manages images recorded by the Camcorder.  
Memory STICK Functions  
Recording still images and MPEG4 movies  
Viewing still images and MPEG4 movies  
- Single  
Terminal  
Protection tab  
- Slide show (Still images only)  
- Multi display (Still images only)  
Protecting images against accidental erasure  
Deleting images recorded on a Memory Stick  
Print marking still images  
Formatting a Memory Stick  
[ Notes ]  
You can use most of the Camcorder’s functions when recording to the Memory Stick.  
appears on the screen while recording to the Memory Stick.  
While recording or loading an image, do not eject or insert the Memory Stick.  
Inserting or ejecting a Memory Stick while recording or loading an image can cause data damage.  
If you want to save all images on the Memory Stick, set the write protect tab on the Memory Stick to LOCK.  
TM  
“Memory Stick” and  
are trademarks of Sony Corporation.  
All other product names mentioned herein may be the trademarks or registered trademarks of their respective  
companies.  
Furthermore, “™” and “®” are not mentioned in each case in this manual.  
87  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Inserting and Ejecting the Memory Card  
Inserting the Memory card  
1. Set the Power switch to Off.  
2. Open the Memory card cover.  
3. Insert the Memory card in the direction of the arrow into the Memory card slot  
located on the bottom of the Camcorder.  
SC-D353/D354 only  
Ejecting the Memory card  
1. Set the Power switch to Off.  
2. Open the Memory card cover.  
Memory Stick  
Memory Stick PRO  
3. Push the Memory card, then it comes out of the Camcorder automatically.  
4. Pull out the Memory card.  
SC-D355 only  
Memory Stick  
Do not attempt to pull the Memory card out without first pushing it in.  
Memory Stick PRO  
[ Notes ]  
Memory Stick Duo type or RS-MMC (SC-D355 only) should be inserted by using  
SD/MMC  
the Adaptor (not supplied).  
If you set the Camcorder to M.Player mode, the last recorded still image appears.  
If there are no recorded images on the Memory card, No image! will display on the  
(Usable Memory card)  
screen.  
While recording, loading, erasing or formatting, do not turn off the power or change the mode.  
Please turn the power off before you insert or eject the Memory card.  
You could lose data on the Memory card.  
Do not allow metal substances to come in contact with the terminals of the Memory card.  
Do not bend, drop or apply strong shock to Memory card.  
After pulling the Memory card out from the Camcorder, please keep the Memory card in a soft case to prevent static shock.  
The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair.  
Save important images separately.  
Samsung is not responsible for data loss due to misuse.  
88  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Structure of Folders and Files on the Memory Card  
The still images that you recorded are saved in JPEG file format on the Memory card.  
The moving images that you recorded are saved in MPEG4 file format on the Memory card.  
Each file has a file number and all files are assigned to a folder.  
- A file number from DCAM0001 is sequentially assigned to each recorded image.  
- Each folder is numbered from 100SSDVC and recorded on the Memory card.  
DCIM  
100 SSDVC  
DCAM 0001  
DCAM 0002  
.
.
.
.
101SSDVC  
Image Format  
Still Image  
<Still image>  
Images are compressed in JPEG (Joint Photographic Experts Group) format.  
The picture size is 800x600 (Tape Capture 640x480).  
MSAMSUNG  
SSMOV  
Moving Image  
Images are compressed in MPEG 4(Moving Picture Experts Group) format.  
100SSMOV  
The picture size is 720x480.  
<Moving image>  
Selecting the Camcorder Mode  
You can use this Camcorder as a Digital Still Camera (DSC).  
You have to set the Mode switch to Memory card to use this Camcorder as Digital Still  
Camera.  
000-0000  
File number  
Folder number  
M.Cam mode (Memory record mode)  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to MEMORY CARD.  
M.Player mode (Memory playback mode)  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
89  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Selecting the Built-in Memory (SC-D354/D355 only)  
Built-in memory setting is available in the Player/M.Cam/M.Player modes. (SC-D354: 32MB/SC-D355: 64MB)  
Images can be stored and played back using the built-in memory.  
Hence, set the memory type before storing and playing back images.  
4
M.Cam Mode  
Memory  
1. Set the Power switch to CAMERA or PLAYER.  
2. Set the Mode switch to TAPE or MEMORY CARD.  
3. Press the MENU button.  
Memory Type  
Photo Quality  
File No.  
Int. Memory  
Fine  
Series  
MENU  
Move  
Select  
Exit  
The menu list will appear.  
6
M.Cam Mode  
Back  
4. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
Memory Type  
Photo Quality  
File No.  
Int. Memory  
Memory card  
5. Move the Menu selector to the left or right to select Memory Type, then press the  
Menu selector.  
6. Move the Menu selector to the left or right to select Int. Memory or Memory card,  
MENU  
Move  
Select  
Exit  
then press the Menu selector.  
7. To exit, press the MENU button.  
Using Quick Menu: Memory Type  
1. Press the Menu selector.  
46  
2min  
2. Move the Menu selector to left or right to select Memory Type, then press the Menu selector.  
Memory Type  
White Balance  
Photo Quality  
Exposure  
Int. Memory  
On  
3. Move the Menu selector to the left or right to select Int. Memory or Memory card,  
then press the Menu selector.  
Manual Focus  
MENU  
Exit  
4. To exit, press the MENU button.  
90  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Selecting the Image Quality  
You can select the quality of a still images to be recorded.  
Select the Image Quality  
1. Set the Power switch to CAMERA.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
2
The menu list will appear.  
4. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Photo Quality, then press the Menu  
selector.  
6. Move the Menu selector to the left or right to select desired image quality(Super Fine, Fine,  
Normal), then press the Menu selector.  
7. To exit, press the MENU button.  
4
5
M.Cam Mode  
Memory  
Photo Quality  
File No.  
Super Fine  
The selected icon will be displayed  
Series  
Number of Images on the Memory Card  
MENU  
Move  
Select  
Exit  
QUALITY  
Super Fine  
Fine  
8MB  
16MB  
Approx. 34  
Approx. 45  
Approx. 74  
Approx. 68  
Approx. 90  
Approx. 148  
M.Cam Mode  
Back  
Super Fine  
Fine  
Photo Quality  
File No.  
Normal  
Normal  
The actual number of images that you can record varies depending on the nature of  
the subject to be recorded.  
MENU  
Move  
Select  
Exit  
[ Notes ]  
The above approximation is based on a 8MB Memory Stick under normal recording conditions.  
The number of pictures that can be stored on a memory card depends on various conditions.  
91  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Using Quick Menu: Photo Quality  
Quick menu is used to access Camcorder functions by using the Menu selector.  
Quick menu provides easier access to frequently used menus without using the MENU button.  
1. Press the Menu selector.  
1
3
46  
1min  
2. Move the Menu selector to left or right to select Photo Quality, then press the Menu selector.  
White Balance  
Photo Quality  
Exposure  
Auto  
A
3. Move the Menu selector to the left or right to select desired image quality(Super Fine, Fine,  
Normal), then press the Menu selector.  
Manual Focus  
MENU  
Exit  
4. To exit, press the MENU button.  
46  
1min  
White Balance  
Photo Quality  
Exposure  
Super Fine  
Manual Focus  
MENU  
Exit  
92  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Memory File Number  
File number setting works only in M.Cam mode.  
File numbers are given to images in the order they were recorded when they are stored on the Memory card.  
Memory file numbers may be set as follows:  
Series: When there are existing files, the new image will be named as the next number in the sequence.  
Reset: When there are no files stored on the Memory card, the file numbering starts from 0001.  
1. Set the Power switch to the CAMERA.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
4
6
M.Cam Mode  
Memory  
Photo Quality  
File No.  
Fine  
Series  
The menu list will appear.  
MENU  
4. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
Move  
Select  
Exit  
5. Move the Menu selector to the left or right to select File No., then press the Menu selector.  
M.Cam Mode  
Back  
Photo Quality  
File No.  
6. Move the Menu selector to the left or right to select desired option(Series or Reset),  
Series  
Reset  
then press the Menu selector.  
7. To exit, press the MENU button.  
MENU  
Move  
Select  
Exit  
93  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Taking Photos  
You may take still images while in M.Cam mode and store the images on the Memory card.  
This function is useful when you want to take a snapshot of a subject while you are using the Camcorder.  
You can take photos using the remote control.(SC-D354/D355 only)  
Audio will not be recorded with a Still image on to the Memory Card.  
1. Set the Power switch to CAMERA.  
1
2. Set the Mode switch to MEMORY CARD.  
3. After framing your object to record, fully press the PHOTO button to take the picture.  
The picture is taken and saved into the Memory card within a few seconds.  
Taking another picture within this interval is not possible.  
The  
indicator appears LCD screen during the time it takes to save the image.  
3
[ Notes ]  
Still images are saved in the Memory card in an 800x600 format.  
The number of still images that can be stored depends on the quality of the image.  
46  
1min  
94  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Viewing Still Images  
This function works only in M.Player mode.  
You can playback and view still images recorded on the Memory card.  
Be sure that the M.Play Select is set to Photo in the Menu.  
There are 3 ways to view recorded images.  
- Single: To view an image frame by frame.  
- Slide show: To view all images automatically and in consecutive order.  
- Multi display: To view 6 images at once.  
To view a Single Image  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
The last recorded image appears.  
If there are no recorded images on the Memory card, No image! will display on  
REV  
FWD  
S.SHOW MULTI DISP.  
the screen.  
3. Using the  
/
(REV/FWD) buttons, search for the desired still image.  
To view the next image: press the  
To view the previous image: press the  
(FWD) button.  
(REV) button.  
Pressing  
(FWD) when you are on the last image will take you to the first  
image and pressing  
(REV) when you are on the first image will take you to the last image.  
Keep pressing  
(FWD) or (REV) to search for an image quickly.  
3
Slide  
2/46  
800x600  
To view a Slide Show  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
The last recorded image appears.  
3. Press the  
(S.SHOW) button.  
100-0002  
All images will be played back consecutively for 2~3 seconds each.  
The “Slide” will be display on the LCD screen.  
4. To stop the slide show, press the  
(S.SHOW) button again.  
[ Notes ]  
Loading time may vary depending on the image size.  
The Slide Show will start from the current picture.  
Any large sized image taken with another device will be displayed as a thumbnail image.  
95  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
To view the Multi Display  
1. Set the Power switch to PLAYER.  
100-0007  
7/25  
2. Set the Mode switch to MEMORY CARD.  
œ
The last recorded image appears.  
œœ  
√√  
3. To view six stored images on single screen, press the (MULTI DISP.) button.  
A selection mark (  
) appears under the image.  
Press (REV/FWD) button to select an image.  
/
4. To return to single playback mode, press the (MULTI DISP.) button again.  
Selected picture is displayed in full screen mode.  
REV  
FWD  
S.SHOW MULTI DISP.  
[ Notes ]  
To display the previous six images, press and hold the  
(REV) button for about 3 seconds.  
To display the next six images, press the  
In order to use Delete, Protect or Print Mark functions in Multi Display view mode,  
use the Quick Menu by pressing the Menu Selector.  
(FWD) button for about 3 seconds.  
96  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Protection from accidental Erasure  
The protection function works only in M.Player mode.  
You can protect important images from accidental erasure.  
If you execute format, all images including protected images will be erased.  
5
7
8
M.Player Mode  
1. Set the Power switch to PLAYER.  
Memory  
M.Play Select  
Delete  
Photo  
2. Set the Mode switch to MEMORY CARD.  
Delete All  
Protect  
The last recorded image appears.  
If there are no recorded images on the Memory card, No image! will display on the screen.  
Off  
Print Mark  
Format  
MENU  
Move  
Select  
Exit  
3. Using the  
/
(REV/FWD) buttons, search for the still image that you want to protect.  
M.Player Mode  
Back  
4. Press the MENU button.  
M.Play Select  
Delete  
The menu list will appear.  
Delete All  
Protect  
Off  
On  
5. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
6. Move the Menu selector to the left or right to select Protect, then press the Menu selector.  
7. Move the Menu selector to the left or right to select On, then press the Menu selector.  
8. To exit, press the MENU button.  
Print Mark  
Format  
MENU  
Move  
Select  
Exit  
2/46  
800x600  
The protection ( ) icon will be displayed.  
[ Notes ]  
Protected pictures will show the ( ) mark when they are displayed.  
100-0002  
If the write protection tab on the Memory card is set to LOCK, you cannot set image protection.  
97  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Using Quick Menu: Protect  
Quick menu is used to access Camcorder functions by simply using the Menu selector.  
Quick menu provides easier access to the frequently used menus without using the MENU button.  
1. Press the Menu selector.  
1
2/46  
800x600  
2. Move the Menu selector to left or right to select Protect, then press the Menu selector.  
3. Move the Menu selector to the left or right to select Off or On, then press the Menu selector.  
4. To exit, press the MENU button.  
M.Play Select  
Delete  
Photo  
Protect  
Print Mark  
MENU  
Exit  
100-0002  
3
2/46  
800x600  
M.Play Select  
Delete  
On  
Protect  
Print Mark  
MENU  
100-0002  
Exit  
2/46  
800x600  
100-0002  
98  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Deleting Still Images and Moving Images  
The Delete function works only in M.Player mode.  
You can erase the still images and moving images recorded on the Memory card.  
If you want to delete protected images, you must first deactivate the image protection.  
An image which has been deleted cannot be recovered.  
5
6
7
M.Player Mode  
1. Set the Power switch to PLAYER.  
Memory  
M.Play Select  
Delete  
Photo  
2. Set the Mode switch to MEMORY CARD.  
Delete All  
Protect  
Off  
Print Mark  
Format  
3. Using the  
/
(REV/FWD) buttons, search for the still image that you want to delete.  
MENU  
Move  
Select  
Exit  
4. Press the MENU button.  
The menu list will appear.  
M.Player Mode  
Back  
M.Play Select  
Delete  
5. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
Delete All  
Protect  
6. Move the Menu selector to the left or right to select Delete, then press the Menu selector.  
Print Mark  
Format  
A message Do you want to delete? appears.  
MENU  
Move  
Select  
Exit  
7. Move the Menu selector to the left or right to select Yes or No, then press the  
2/46  
Menu selector.  
800x600  
8. To exit, press the MENU button.  
Do you want to delete?  
Yes No  
Deleting All images at once  
Previous  
Next  
100-0002  
Move the Menu selector to the left or right to select Delete All,  
then press the Menu selector. A message Do you want to delete all? appears.  
99  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Using Quick Menu: Delete  
Quick menu is used to access Camcorder functions by simply using the Menu selector.  
Quick menu provides easier access to the frequently used menus without using the MENU button.  
1. Press the Menu selector.  
1
2/46  
800x600  
2. Move the Menu selector to left or right to select Delete, then press the Menu selector.  
M.Play Select  
Delete  
3. Move the Menu selector to the left or right to select Cancel or Delete, then press the  
Protect  
Menu selector.  
Print Mark  
100-0002  
MENU  
Exit  
4. To exit, press the MENU button.  
3
2/46  
800x600  
[ Notes ]  
When there is no stored picture on the Memory card, the message No image! will be displayed.  
M.Play Select  
Delete  
If an erroneous image file is found on the Memory card, the message Memory card error! will be  
displayed.  
Delete  
Protect  
Print Mark  
It may be caused by copying images from different digital devices.  
Formatting the Memory card will delete all the stored images. (see page 101)  
100-0002  
MENU  
Exit  
To protect important pictures from accidental deletion, activate the image protection (refer to page 97).  
Deleting all files using the Delete All menu may take a while.  
To delete all files much faster, format the memory card after backing up the files into other storage device.  
100  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Formatting the Memory Card  
The Format function works only in M.Player mode.  
You can use the memory format functions to completely delete all images and options on the Memory card,  
including protected images.  
The format function restores the Memory card to its initial state.  
The Memory card supplied with this Camcorder has been formatted already.  
Attention  
If you execute the memory format function, all images will be erased completely and erased  
images cannot be recovered.  
4
5
7
M.Player Mode  
Memory  
M.Play Select  
Delete  
Photo  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
Delete All  
Protect  
Off  
Print Mark  
Format  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Format, then press the Menu selector.  
6. Move the Menu selector to the left or right to select desired option(Int. Memory or Memory  
card), then press the Menu selector. (SC-D354/D355 only)  
M.Player Mode  
Memory  
M.Play Select  
Delete  
If you select Int. Memory or Memory card, a message All files are deleted! Do you  
Delete All  
Protect  
want to format? appears.  
7. Move the Menu selector to the left or right to select Yes, then press the Menu selector.  
Print Mark  
Format  
Complete! appears when the format is completed.  
MENU  
Move  
Select  
Exit  
8. To exit, press the MENU button.  
[ Notes ]  
2/46  
If you execute the Format function,all still images/motion clips will be erased completely and  
erased still images/motion clips cannot be recovered.  
Formatting the Memory card using a different device will cause Memory card read errors.  
Formatting the Memory card deletes all the stored data in the Memory card.  
Do not turn the power off in the middle of the formatting.  
A Memory Stick with the protection tab set to save will not be formatted. (see page 87)  
Do not format the Memory Card on a PC.  
800x600  
All files are deleted !  
Do you want to format?  
Yes No  
100-0002  
“Not Formatted” message may appear if a Memory Card formatted on a PC was inserted.  
101  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
MPEG Recording  
You can record moving picture images with audio on the Memory card.  
The screen format of the moving picture to be recorded is 720x480.  
Saving Moving Picture Files onto a Memory Card  
2
3
4
1. Check whether Memory card is inserted into the Camcorder.  
If it is not in the Camcorder, insert it into the slot.  
2. Set the Power switch to CAMERA.  
3. Set the Mode switch to MEMORY CARD.  
4. Press the Start/Stop button, the images are recorded on the Memory card in MPEG4.  
You can record a Camcorder still image on Memory card by pressing the PHOTO button  
instead of the Start/Stop button.  
5. Press the Start/Stop button to stop the recording.  
[ Notes ]  
MENU button and Menu selector are not available while MPEG recording.  
To use MENU button and Menu selector, stop recording.  
MPEG recording is not available when a menu or Quick menu is displayed on the screen.  
To start recording, press the MENU button to make it disappear.  
Before using the MPEG REC function, check whether the Memory card is inserted into the Camcorder.  
Moving images that you recorded are saved in *.avi(avi 1.0) file format on the Memory card.  
The files that you recorded are saved in a following folder. (see illustration low right hand corner)  
The moving picture images on a Memory card are a smaller size and lower definition  
than images on tape.  
The sound is recorded in mono.  
The following functions are not allowed in M.Cam Mode.  
MSAMSUNG  
SSMOV  
100SSMOV  
DIS (Digital Image Stabilizer), Digital Zoom, Fade, Program AE, Digital Effect, Slow Shutter.  
While recording on a Memory card, don’t insert or eject the tape as it may record noise.  
<Moving image>  
While a Memory card, don’t eject the card or it may break the data on the Memory card or Memory card itself.  
Turning the power off while accessing the memory card may damage the data stored on the memory card.  
102  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
MPEG Playback  
The MPEG Playback function works only in M. Player mode.  
You can play the moving picture images on the Memory card.  
Stereo audio is played back at the same time.  
2
Playing back on a PC shows better quality than on a TV.  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
The menu list will appear.  
4. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
5. Move the Menu selector to the left or right to select M.Play Select, then press the Menu  
selector.  
6. Move the Menu selector to the left or right to select Movie, then press the Menu selector.  
7. To exit the menu, push the MENU button.  
4
6
M.Player Mode  
Memory  
M.Play Select  
Delete  
Photo  
Delete All  
Protect  
Off  
Print Mark  
Format  
8. Using the  
9. Press the  
/
(REV/FWD) buttons, search for the moving picture that you want to playback.  
(PLAY/STILL) button.  
MENU  
Move  
Select  
Exit  
The moving pictures recorded on the Memory card will playback.  
You can control playback using the  
buttons.  
(PLAY/STILL)  
/
(REW/FF)/ (STOP)  
M.Player Mode  
Back  
Photo  
Movie  
M.Play Select  
Delete  
[ Notes ]  
Delete All  
Protect  
MENU button and Menu selector are not available while MPEG playback.  
To use MENU button and Menu selector, stop playback.  
Print Mark  
Format  
MPEG playback is not available when a menu or Quick menu is displayed on the screen.  
To start playback, press the MENU button to make it disappear.  
There may be broken or mosaic pictures while playing the MPEG4 moving picture images,  
but it is not malfunction.  
The moving picture images that you recorded on the Memory card may not play on other manufacturer’s.  
The MPEG4 file recorded by another Camcorder may not play on by this Camcorder.  
MENU  
Move  
Select  
Exit  
To playback MPEG4 moving pictures on a PC, the Video Codec (in the CD provided with the camcorder) should be installed.  
- You need Microsoft Windows Media Player Version 9 or higher version in order to play MPEG4 file on the Memory card on your  
PC.  
- You can download the Microsoft Windows Media Player applied each languages on Microsoft Website,  
“http://www.microsoft.com/windows/windowsmedia/download/default.asp”.  
Memory Stick PRO provides better image quality than Memory Stick.  
103  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Using Quick Menu: M.Play Select  
Quick menu is used to access Camcorder functions by simply using the Menu selector.  
Quick menu provides easier access to the frequently used menus without using the MENU button.  
1. Press the Menu selector.  
1
2/46  
800x600  
2. Move the Menu selector to the left or right to select M.Play Select, then press  
the Menu selector.  
M.Play Select  
Delete  
Photo  
Protect  
3. Move the Menu selector to the left or right to select Photo or Movie, then press  
Print Mark  
the Menu selector.  
100-0002  
MENU  
Exit  
4. To exit, press the MENU button.  
3
2/46  
800x600  
M.Play Select  
Delete  
Movie  
Protect  
Print Mark  
100-0002  
MENU  
Exit  
104  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Recording an Image from a Cassette as a Still Image  
This function works only in Player mode.  
You can record still images from a cassette on a Memory card.  
If you want to move recorded multiple still images from a cassette to a Memory card, use the  
COPY function.  
1
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to TAPE.  
3. Playback the cassette.  
2
4
4. Press the PHOTO button.  
The still image is recorded on the Memory card.  
During the time it takes to save an image, the play back screen is paused and the OSD is  
displayed as illustrated in the lower right hand corner.  
[ Notes ]  
Still images copied from the cassette to the memory card are saved in a 640x480 format.  
Number of images you can save varies depending on the image resolution.  
2/46  
25min  
Now copying...  
105  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Copying Still Images from a Cassette to Memory Card  
The photo copy function works only in Player mode.  
You can copy still images recorded with photo function on a cassette onto a Memory card.  
Rewind the tape to the point which you wants.  
4
5
Player Mode  
Tape  
Photo Search  
Photo Copy  
Audio Select  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to TAPE.  
3. Press the MENU button.  
Sound[1]  
MENU  
Move  
Select  
Exit  
The menu list will appear.  
Player Mode  
Back  
Photo Search  
Photo Copy  
Audio Select  
4. Move the Menu selector to the left or right to select Tape, then press the Menu selector.  
5. Move the Menu selector to the left or right to select Photo Copy, then press the Menu selector.  
All still images that recorded on a cassette will be copied into a Memory card.  
MENU  
Move  
Select  
SP  
Exit  
6. The Camcorder automatically performs the photo search to find still images and copy starts.  
6
0:44:38:03  
25min  
Photo Copy  
7. Press the (STOP) button to stop copying.  
Copy stops when the cassette is finished or Memory card is full.  
Photo searching...  
[ Note ]  
MENU  
Back  
Exit  
Still images copied from the cassette to the memory card are saved in 640x480 format.  
2/46  
25min  
Photo Copy  
Now copying...  
MENU  
Back  
Exit  
106  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Copy to (Copies Files from the Memory Card to the Built-in Memory) (SC-D354/D355 only)  
The Copy To function works only in M.Player mode.  
You can copy selected or all images stored in the Memory card to the built-in memory.  
1
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
The menu list will appear.  
4
6
M.Player Mode  
Memory  
Memory Type  
M.Play Select  
Delete  
4. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
Int. Memory  
Photo  
5. Move the Menu selector to the left or right to select Copy to, then press the Menu selector.  
Delete All  
Protect  
Off  
Print Mark  
6. Move the Menu selector to the left or right to select options(Back, This File or All Files),  
MENU  
Move  
Select  
Exit  
then press Menu selector.  
To go back to the previous mode, select Back.  
If This File or All Files is selected, Now copying… is displayed on the screen and copying  
M.Player Mode  
Back  
starts.  
Back  
Copy to  
Format  
This File  
All Files  
7. To exit, press the MENU button.  
MENU  
Move  
Select  
Exit  
107  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Marking Images for Printing  
This Camcorder supports the DPOF (Digital Print Order Format) print format.  
You can automatically print images recorded on a Memory card with a printer supporting DPOF.  
There are 2 ways to make a Print Mark.  
- This File: You can set a print mark on the photo image displayed on the LCD screen. It can be set up to 999.  
- All Files: To print 1 copy each of all of the stored images.  
1. Set the Power switch to PLAYER.  
5
M.Player Mode  
Memory  
M.Play Select  
Delete  
2. Set the Mode switch to MEMORY CARD.  
Photo  
The last recorded image appears.  
Delete All  
Protect  
Off  
Print Mark  
Format  
3. Using the  
/
(REV/FWD) buttons, search for the still image that you want to mark.  
MENU  
Move  
Select  
Exit  
4. Press the MENU button.  
The menu list will appear.  
7
M.Player Mode  
Back  
M.Play Select  
Delete  
5. Move the Menu selector to the left or right to select Memory, then press the Menu selector.  
Delete All  
Protect  
All Off  
This File  
All Files  
6. Move the Menu selector to the left or right to select Print Mark, then press the Menu selector.  
Print Mark  
Format  
7. Move the Menu selector to the left or right to select desired option(All Off, This File or All Files),  
Previous  
Next  
then press the Menu selector.  
9
2/46  
8. If you select This File, move the Menu selector to the left or right to select the quantity,  
800x600  
then press the Menu selector.  
9. To exit, press the MENU button.  
002  
Removing the Print Mark  
100-0002  
To remove all Print Marks select All Off, to remove individual file’s Print Mark, select the file and set  
This File to 000.  
108  
ENGLISH  
Digital Still Camera Mode (SC-D353/D354/D355 only)  
Using Quick Menu: Print Mark  
Quick menu is used to access Camcorder functions by simply using the Menu selector.  
Quick menu provides easier access to the frequently used menus without using the MENU button.  
It can be set on the selected file only.  
1
2/46  
1. Press the Menu selector.  
800x600  
2. Move the Menu selector to left or right to select Print Mark, then press the Menu selector.  
3. Move the Menu selector to the left or right to select the quantity, then press the Menu selector.  
4. To exit, press the MENU button.  
M.Play Select  
Delete  
Photo  
Protect  
Print Mark  
100-0002  
MENU  
Exit  
3
2/46  
800x600  
[ Notes ]  
If the Print Mark is set to This File, you can set the number of copies from 0 to 999.  
M.Play Select  
Delete  
If the Print Mark is set to All Files, you can set the number of copies to 0 or 1.  
The All Files option may require extended operation time depending on the number of stored images.  
DPOF supporting printers are commercially available.  
Protect  
002  
Print Mark  
MENU  
Exit  
100-0002  
Use the USB cable provided with the Camcorder.  
2/46  
800x600  
002  
100-0002  
109  
ENGLISH  
PictBridgeTM (SC-D353/D354/D355 only)  
TM  
Printing Your Pictures – Using the PictBridge  
PictBridgeTM function works only in M.Player mode.  
By connecting the Camcorder to printers with PictBridge support (sold separately), you can send images from the Memory  
card directly to the printer with a few simple operations.  
With the PictBridge Support, you can control the printer directly through your Camcorder in order to print out stored pictures.  
For direct printing of your stored pictures using the PictBridge function, you must connect your Camcorder to a PictBridge  
printer using a USB cable.  
4
Connecting To a Printer  
M.Player Mode  
System  
1. Turn your printer power off.  
Clock Set  
Remote  
On  
Turn your Camcorder on by setting the Power switch to PLAYER.  
2. Set the Mode switch to MEMORY CARD.  
3. Press the MENU button.  
Beep Sound  
USB Version  
USB Connect  
Language  
On  
USB 1.1  
Computer  
English  
The menu list will appear.  
MENU  
Move  
Select  
Exit  
4. Move the Menu selector to the left or right to select System, then press the Menu selector.  
5. Move the Menu selector to the left or right to select USB Connect, then press the  
Menu selector.  
6
M.Player Mode  
Back  
6. Move the Menu selector to the left or right to select Printer, then press the Menu selector.  
Clock Set  
Remote  
Computer: Connect to a computer.  
Printer: Connect to a printer. (To use the PictBridge function, connect to a printer.)  
Beep Sound  
USB Version  
USB Connect  
Language  
Computer  
Printer  
7. Connect your Camcorder to the printer using the provided USB cable.  
8. Turn your printer power on.  
MENU  
Move  
Select  
Exit  
The PictBridge menu screen appears automatically after a short period.  
The cursor highlights Printer.  
Selecting Images  
M.Player Mode  
Back  
1. In the PictBridge settings menu, press the  
/
(REV/FWD) buttons to select an image to print.  
Print  
Copies  
Num.  
002  
Setting the Number of Prints  
Date/Time  
2. Move the Menu selector to the left or right to select Copies, then press the Menu selector.  
3. Move the Menu selector to the left or right to set the number of prints, then press the Menu  
selector.  
100-0002  
Previous  
Next  
110  
ENGLISH  
PictBridgeTM (SC-D353/D354/D355 only)  
Setting the Date/Time Imprint Option  
4. Move the Menu selector to the left or right to select Date/Time, then press the  
Menu selector.  
5. Move the Menu selector to the left or right to select the Date/Time display type,  
then press the Menu selector.  
5
M.Player Mode  
Back  
Print  
Copies  
Date/Time  
Off  
Date  
Date/Time display type: Off, Date, Time, Date&Time  
Time  
Date&Time  
Printing Images  
100-0002  
Previous  
Next  
Move the Menu selector to the left or right to select Print, then press the Menu selector,  
and selected image files will be printed.  
M.Player Mode  
Back  
Print  
Copies  
[ Notes ]  
Date/Time  
The Date/Time Imprint Option may not supported by all printers. Check with your printer manufacturer.  
The DATE/TIME Menu cannot be setup if the printer does not support this option.  
The PictBridgeTM is a registered trademark of CIPA(Camera & Imaging Products Association), an image  
transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.  
PictBridge supporting printers are commercially available.  
100-0002  
Previous  
Next  
Use the USB cable provided with the Camcorder.  
Use the AC power adapter for your Camcorder during PictBridge Direct Printing.  
Turning your Camcorder off during the printing might damage data on the Memory card.  
Printing still images is supported. Motion clips are not available for printing.  
You can set various printing options depending on the printer.  
Please refer to the user’s manual of the printer.  
111  
ENGLISH  
Maintenance  
After Finishing a Recording  
At the end of a recording you must remove the power source.  
When recording with a Lithium ion Battery pack, leaving the pack on the Camcorder can reduce the life span of the battery.  
The Battery pack should be release after recording is completed.  
1
1. Slide the TAPE EJECT switch in the direction of the arrow.  
Opening the cassette door ejects the tape automatically.  
Please wait while the tape is completely ejected.  
2. After removing the tape, close the door and store the Camcorder in a dust free environment.  
Dust and other foreign materials can cause square-shaped noise or jerky images.  
2
3
4
3. Set the Power switch to the Off.  
4. Disconnect the power source or remove the lithium ion Battery pack.  
Press the BATTERY RELEASE button located on the bottom of the Camcorder  
and slide the Battery pack in the direction of the arrow.  
112  
ENGLISH  
Maintenance  
Cleaning and Maintaining the Camcorder  
Cleaning the Video Heads  
To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped  
noise or distortion, or a blue screen appears.  
(blue screen)  
1. Set the Power switch to PLAYER.  
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)  
3. Insert the cleaning tape.  
4. Press the  
(PLAY/STILL) button.  
5. Press the (STOP) button after 10 seconds.  
[ Notes ]  
Check the quality of the picture using a videocassette.  
- If the picture quality has not improved, repeat the operation.  
Clean the video heads with a dry type cassette cleaner.  
Some cleaning cassette products stop automatically. Refer to the cleaning cassette’s instructions for detailed information.  
If the problem continues after the cleaning, consult your nearest Samsung dealer or Authorized Service Center.  
113  
ENGLISH  
Maintenance  
Using Your Camcorder Abroad  
Each country or region has its own electric and color systems.  
Before using your Camcorder abroad, check the following items.  
Power sources  
You can use your Camcorder in any country or area with the supplied AC Power adapter within 100V to 240V, 50/60 Hz.  
Use a commercially available AC jack adapter, if necessary, depending on the design of the local wall outlet.  
Color system  
You can view your recording in the Viewfinder.  
However, to view it on a television or copy it to a videocassette recorder, the television or VCR must be NTSC-compatible and  
have the appropriate audio/video jacks.  
Otherwise, you may need to use a transcoder.  
PAL-compatible Countries/Regions  
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece,  
Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania,  
Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.  
NTSC-compatible Countries/Regions  
Bahamas, Canada, Central America, Japan, Korea, Mexico, Philippines, Taiwan, United States of America, etc.  
[ Note ]  
You can make recordings with your Camcorder and view pictures on the LCD screen from anywhere in the world.  
114  
ENGLISH  
Troubleshooting  
Troubleshooting  
Before contacting a Samsung authorized service center, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Self Diagnosis Display  
Display Blinking  
slow  
Informs that...  
Action  
the Battery pack is almost discharged. Change to a charged one.  
When the remaining time on the tape  
Tape end! slow  
Prepare a new one.  
is about 2 minutes.  
Tape end!  
no  
Change to a new one.  
Insert a tape.  
the tape reached its end.  
No Tape!  
there is no tape in Camcorder.  
slow  
If you want to record, release  
the protection.  
Protection! slow  
the tape is protected from recording.  
slow the Camcorder has some mechanical  
fault.  
1. Eject the tape.  
2. Set to OFF.  
3. Detach the battery.  
4. Reattach the battery.  
* If unresolved contact your local  
samsung service center.  
....D  
L
C
R
moisture condensation has formed in  
the Camcorder.  
slow  
see below.  
Moisture Condensation  
If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder,  
on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit  
may not operate correctly.  
To prevent possible damage under these circumstances, the Camcorder is fitted with a moisture sensor.  
If there is moisture inside the Camcorder,  
ejection will work.  
(DEW) is displayed. If this happens, none of the functions except cassette  
Open the cassette compartment and remove the battery.  
Leave the Camcorder for at least two hours in a dry warm room.  
115  
ENGLISH  
Troubleshooting  
Self Diagnosis Display in M.Cam/M.Player Modes (SC-D353/D354/D355 only)  
Display  
Blinking  
slow  
Informs that...  
Action  
There is no Memory card in  
the Camcorder.  
No Memory Card!  
Insert a Memory card.  
There is not enough memory Change to a new Memory  
Memory Full!  
No image!  
slow  
slow  
to record.  
card. Erase recorded image.  
There are no images recorded  
on the Memory card.  
Record new images.  
The Memory card is record  
protected.  
Release the write protect tab  
on the Memory card.  
Write protect!  
Protect!  
slow  
slow  
When you try to delete to  
protected image.  
Cancel the protection of  
image.  
Format a Memory card or  
insert Memory card recorded  
on this Camcorder.  
The Camcorder can not  
playback.  
Read error!  
slow  
Format a Memory card or  
change to a new Memory card.  
Write error!  
slow The Camcorder can not record.  
The Memory card needs to  
format.  
Format a Memory card.  
(see page 101)  
Not Formatted!  
Now deleted...  
slow  
Wait until delete has been  
finished.  
slow When progressing file delete.  
Eject and re-insert the  
memory card  
Memory Card  
error!  
If inserted Memory Card is not  
slow  
recognized by the Camcorder.  
Try another Memory Card  
116  
ENGLISH  
Troubleshooting  
If these instructions do not solve your problem, contact your nearest Samsung authorized service center.  
Symptom  
Explanation/Solution  
You cannot switch the  
Camcorder on.  
Check the Battery pack or the AC Power adapter.  
Check the Power switch is set to CAMERA.  
You have reached the end of the cassette.  
Check the record protection tab on the cassette.  
Start/Stop button  
does not operate  
while recording.  
You have left the Camcorder set to STBY for more  
than 5 minutes without using it.  
The Battery pack is fully exhausted.  
The Camcorder shuts  
off automatically.  
The atmospheric temperature is too low.  
The Battery pack has not been charged fully.  
The Battery pack is completely dead, and cannot be  
recharged, Use another Battery pack.  
Charge runs out  
quickly.  
When you see a blue  
screen during  
playback.  
The video heads may be dirty.  
Clean the head with a cleaning tape.  
The contrast between the subject and the background  
is too great for the Camcorder to operate normally.  
Make the background bright to reduce the contrast or  
use the BLC function while you are recording in bright  
Surroundings.  
A vertical strip appears  
on the screen when  
recording a dark  
background.  
The Viewfinder lens has not been adjusted.  
Adjust the Viewfinder control lever until the indicators  
displayed on the Viewfinder come into sharp focus.  
The image in the  
Viewfinder is blurred.  
Auto focus does not  
work.  
Check the Manual Focus menu.  
Auto focus does not work in the Manual Focus mode.  
Play, FF or REW  
button does not work.  
Check the Power switch. Set the Power switch to PLAYER.  
You have reached the beginning or end of the cassette.  
This is normal operation and it is not a failure or  
defect.  
When you see a  
mosaic pattern  
The tape may be damaged. Replace the tape.  
Cleaning the video heads (see page 113).  
during playback  
search.  
117  
ENGLISH  
Specifications  
Model Name: SC-D351/D352/D353/D354/D355  
System  
Video signal  
NTSC  
Video recording system  
Audio recording system  
Usable cassette  
Tape speed  
Tape recording time  
FF/REW time  
Image device  
Lens  
Filter diameter  
2 rotary heads, Helical scanning system  
Rotary heads, PCM system  
Digital video tape (6.35mm width): Mini DV cassette  
SP: approx. 18.81mm/s LP: approx. 12.56mm/s  
SP: 60 minutes (when using DVM 60), LP: 90 minutes (when using DVM 60)  
Approx. 150 sec. (using DVM60 tape)  
CCD (Charge Coupled Device) (680k pixels)  
F1.6 20x(Optical), 900x(Digital) Electronic zoom lens  
Ø30  
LCD screen/Viewfinder  
Size/dot number  
LCD screen Method  
Viewfinder  
2.36inchs 112k  
TFT LCD  
B/W LCD (SC-D351/D352/D353/D354 only), Color LCD (SC-D355 only)  
Connectors  
Video output  
S-video output  
Audio output  
DV input/output  
USB output  
1Vp-p (75terminated)  
Y: 1Vp-p, 75, C: 0. 286Vp-p, 75Ω  
-7.5dBs (600terminated)  
4pin special in/out connector  
Mini-B type connector  
External mic  
Ø3.5 stereo  
General  
Power source  
DC 8.4V, Lithium Ion Battery Pack 7.4V  
Power source type  
Power consumption  
(Recording)  
Lithium Ion Battery Pack, Power supply (100V~240V) 50/60Hz  
4.3W(LCD), 4.0W(Viewfinder)  
Operating temperature  
Storage temperature  
External dimension  
Weight  
0˚~40˚C (32˚F~104˚F)  
-20˚C ~ 60˚C (-4˚F ~ 140˚F)  
Height 3.62inches(92mm), Length 4.63inches(117.5mm), Width 2.52inches(64mm)  
0.904lb (410g, 14.46oz) (Except for Lithium Ion Battery Pack and tape)  
Omni-directional stereo microphone  
Internal MIC  
Remote control  
(SC-D354/D355 only)  
Indoors: greater than 49ft(15m) (straight line), Outdoors: about 16.4ft(5m) (straight line)  
- These technical specifications and design may be changed without notice.  
118  
ENGLISH  
Index  
- A -  
- O -  
OSD .................................................................................................... 24, 25  
Accessories ................................................................................................12  
AF/MF ....................................................................................................... 58  
Audio Dubbing .......................................................................................... 77  
Audio Mode................................................................................................ 55  
- P -  
Photo Copy ............................................................................................. 106  
Photo Quality ............................................................................................ 91  
Photo Search ............................................................................................. 68  
Program AE ........................................................................................ 63, 64  
Protection .................................................................................................. 97  
- B -  
Battery Pack .............................................................................................. 21  
BLC ........................................................................................................... 46  
- C -  
- R -  
Cassette .................................................................................................... 36  
Cleaning .................................................................................................. 113  
Clock Set.................................................................................................... 27  
Connecting ................................................................................................ 71  
Rec Mode .................................................................................................. 54  
Rec Search ............................................................................................... 41  
Remote ...................................................................................................... 28  
Remote control ................................................................................... 17, 43  
- D -  
- S -  
Shutter Speed ........................................................................................... 57  
Date/Time .................................................................................................. 33  
DC Cable .................................................................................................. 20  
Deleting ..................................................................................................... 99  
Demonstration............................................................................................ 31  
DIS ............................................................................................................. 61  
Digital Effect .............................................................................................. 65  
DV ........................................................................................................ 79, 80  
Sound ........................................................................................................ 70  
Speaker ..................................................................................................... 70  
Still images ................................................................................................ 95  
- T -  
Tele MACRO ............................................................................................. 44  
- E -  
TV Display.................................................................................................. 34  
EASY.Q Mode ........................................................................................... 40  
Exposure ................................................................................................... 57  
- F -  
- U -  
USB ..................................................................................................... 81~86  
Fade .......................................................................................................... 45  
Formatting ............................................................................................... 101  
Frame advance ......................................................................................... 74  
Function buttons ....................................................................................... 13  
- V -  
Viewfinder ..................................................................................................35  
- W -  
White Balance............................................................................................ 59  
Wind Cut .................................................................................................... 56  
- H -  
Hand Strap ................................................................................................ 18  
- I -  
IEEE1394 .................................................................................................. 79  
- L -  
- Z -  
ZERO MEMORY ....................................................................................... 42  
Zoom ......................................................................................................... 44  
LCD ........................................................................................................... 32  
- M -  
Memory card ............................................................................................. 88  
Memory Stick ............................................................................................ 87  
MPEG Recording..................................................................................... 102  
119  
ENGLISH  
Warranty (SEA users only)  
SAMSUNG  
LIMITED WARRANTY  
SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship.  
SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due  
to improper workmanship or defective material, SEA will repair or replace the product at it’s option.  
All warranty repairs must be performed by a SEA authorized service center. The name and address of the location  
nearest you can be obtained by calling toll free: 1-800 SAMSUNG (1-800-726-7864).  
Labor  
90 days carry-in  
Parts  
1 year  
On carry-in models, transportation to and from the service center is the customer’s responsibility.  
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase.  
It must be presented to the authorized service center.  
EXCLUSIONS (WHAT IS NOT COVERED)  
This warranty does not cover damage due to accident, fire, flood and/or other acts of God; misuse, incorrect line  
voltage, improper installation, improper or unauthorized repairs, commercial use, or damage that occurs in shipping.  
Exterior and interior finish, lamps, and glass are not covered under this warranty.  
Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty.  
This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is  
valid only on products purchased in the United States and Puerto Rico.  
Some States do not allow the exclusions or limitations of incidental or consequential damages, or allow limitations on  
how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.  
120  
ENGLISH  
Memo  
121  
ENGLISH  
Memo  
122  
ENGLISH  
Memo  
123  
ENGLISH  
THIS CAMCORDER IS MANUFACTURED BY:  
SERVICE DIVISION  
400 Valley Road, Suite 201, Mt. Arlington N.J. 07856  
Tel: 1-800-SAMSUNG  
(1-800-726-7864)  
*Samsung Electronics’ Internet Home Page  
http://www.samsung.com  
AD68-00839B  

Weil McLain CGa User Manual
Sony XR CA670X User Manual
Sony DSR 400PK User Manual
Sony DIGITAL BETACAM DVW 970 User Manual
Sony Cyber shot DSC HX100V User Manual
Sony BLU RAY DISC BDP S570 User Manual
Sharp XEA 201 User Manual
Sanyo Camcorder VPC WH1GX User Manual
Rosen Entertainment Systems AV CY0801 G42 User Manual
Rosen Entertainment Systems 10.2 User Manual