FNP2414
FNP2514
FNP2614U
FNP2614
Installation
& Operation
COMPONENT SYSTEMS
Páginas de Referencia para la Instalación
Schéma d’Installation
Installations Beiblatt
Istruzioni di Installation
TABLE OF CONTENTS
Introduction ..............................................................................................1
Package Contents......................................................................................1
Installation Considerations ........................................................................2
Mounting Location....................................................................................3
Installation ................................................................................................4
Troubleshooting ........................................................................................7
Specifications............................................................................................8
Warranty Information................................................................................9
International Information ........................................................................10
GETTING STARTED
Welcome to Rockford Fosgate! This manual is designed to provide
information for the owner, salesperson and installer. For those of you
who want quick information on how to install this product, please turn
to the Installation Section of this manual or refer to the icons listed
below. Other information can be located by using the Table of
Contents. We, at Rockford Fosgate, have worked very hard to make
sure all the information in this manual is current. But, as we are con-
stantly finding new ways to improve our product, this information is
subject to change without notice.
I
TROUBLE-
S
H
O
O
T
I
N
G
N
S
T
A
L
L
A
T
I
O
N
+-
Sections marked
INSTALLATION
Sections marked
TROUBLESHOOTING
include “slam dunk”
wiring connections
include recommendations for
curing installation problems
Visit our website for the latest information on all Rockford products.
– ii –
INTRODUCTION
This manual provides information on the features and installation of the
fanaticP System. We suggest you save this manual for future reference. We
strongly recommend you have your Authorized Rockford Fosgate Dealer
install the fanaticP System. If you do choose to install the system yourself,
please be sure to read the entire manual before beginning.
PACKAGE CONTENTS
FNP2414
4" fanaticP Component System
(2) FNP2401 Tweeters: includes 3/4" [20mm]
mylar dome tweeter, flush mount housing,
surface mount housing, wedge mount housing
(2) Tweeter Mounting Brackets
(2) .110 Male Fast-on Connectors
(2) FNP2404 4" Midrange Speakers
(2) 4" Speaker Grilles
(2) 4" Speaker Grille Rings
(2) FNP242x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20') 18 Gauge Speaker Wire
(4) #8-32 x .500 Screws
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
FNP2514
5-1/4" fanaticP Component System
(2) FNP2401 Tweeters: includes 3/4" [20mm]
mylar dome tweeter, flush mount housing,
surface mount housing, wedge mount housing
(2) Tweeter Mounting Brackets
(2) .110 Male Fast-on Connectors
(2) FNP2405 5-1⁄4" Midrange Speakers
(2) 5-1⁄4" Speaker Grilles
(2) 5-1⁄4" Speaker Grille Rings
(2) FNP242x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20') 18 Gauge Speaker Wire
(4) #8-32 x .500 Screws
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
FNP2614U
6" fanaticP Component System
(2) FNP2401 Tweeters: includes 3/4" [20mm]
mylar dome tweeter, flush mount housing,
surface mount housing, wedge mount housing
(2) Tweeter Mounting Brackets
(2) .110 Male Fast-on Connectors
(2) FNP2406U 6" Midrange Speakers
(2) 6" Speaker Grilles
(2) 6" Speaker Grille Rings
(4) #8-32 x .500 Screws
(2) FNP242x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20') 18 Gauge Speaker Wire
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
FNP2614
6-1/2" fanaticP Component System
(2) FNP2401 Tweeters: includes 3/4" [20mm]
mylar dome tweeter, flush mount housing,
surface mount housing, wedge mount housing
(2) Tweeter Mounting Brackets
(2) .110 Male Fast-on Connectors
(2) FNP2406 6-1⁄2" Midrange Speakers
(2) 6-1⁄2" Speaker Grilles
(2) 6-1⁄2" Speaker Grille Rings
(2) FNP242x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20') 18 Gauge Speaker Wire
(4) #8-32 x .500 Screws
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
– 1 –
I
N
S
T
A
L
L
A
T
I
O
N
INSTALLATION CONSIDERATIONS
+-
Tools Needed
The following is a list of some of the tools necessary for the installation of
your speakers:
• Power Drill with assorted bits
• #2 Phillips Screwdriver
• Tape Measure
• Voltmeter
General
1. For safety, disconnect the negative lead from the battery prior to beginning
the installation.
2. Never run wires underneath the vehicle. Running the wires inside the vehi-
cle provides the best protection.
3. Avoid running wires over or through sharp edges. Use rubber or plastic
grommets to protect any wires routed through metal.
4. Mount the speakers/crossovers away from electrical sources (other than the
amplifier) i.e., power cables, electronic fuel pumps, vehicle computers, and
other potential noise sources.
5. Mount the speakers/crossovers away from areas of extreme heat or moisture.
Speakers
1. Make sure there is an area large enough of the speaker to mount.
Warning! Failure to do this can cause damage to the speaker if the
speaker frame is bent during installation.
2. Check to see that the location is deep enough for the speaker(s) and the
location does not interfere with the normal operation of the vehicle.
3. When mounting the speaker(s) in the door of a vehicle, make sure the
speaker(s) do not interfere with either the door or window operation.
4. When mounting the speaker(s) on the rear deck of the vehicle, check the
operation of the rear hatch or trunk lid. Make sure the torsion bars and
other moving parts are not obstructed by the speaker(s) installation.
• Please refer to the Specifications section of this manual for proper
mounting diameter and depth of the speaker(s).
Crossovers
1. Make sure there is a flat area large enough for the crossover to mount.
2. For best results, mount the crossover(s) next to the amplifier for a deco-
rative finish to the installation and provide an easy upgrade (no new
wires to run) for a bi-amp Rockford Fosgate system in the future.
– 2 –
MOUNTING LOCATION
A solid front stage with a good image is one of the most difficult tasks to
achieve in a vehicle. No car has the optimum listening environment. This
makes proper sound staging very difficult to accomplish. Most speakers
tend to be placed where they will fit easily, as opposed to where they can
perform the best. The mounting location of your speakers will have a great
effect on the sound quality of your stereo system. The special care taken to
place the speakers will yield many hours of listening enjoyment in return.
Several important recommendations should be followed.
• Place the speakers where they have a direct path to the listening area.
• For the best integration between the midrange and tweeter, the tweeter
should be placed less than 2" from the midrange (Figure 1).
• If you cannot place the tweeter less than 2"
from the midrange, then place the tweeter
more than 7" from the midrange. Placing the
2" or less
tweeter 2"-7" from the midrange can cause
destructive interference (frequency response
problems) which will affect the speaker's abil-
ity to reproduce the frequency range around
the crossover frequency of the system.
• Whenever possible, place the tweeter direct-
ly above or below the midrange as this max-
imizes the imaging (point source) capability
of the speakers (Figure 2).
Figure 1
Figure 2-B
Figure 2-A
• Sound radiated from a “point source” provides the best stereo imaging
because the separation of the acoustical centers between the midrange
and tweeter for each channel is at the optimum distance. In a closed en-
vironment such as an automobile, horizontal speaker alignment (Figure
2-A) can cause severe amplitude and phase differences which will
degrade not only the imaging, but also the frequency response. This is
due to the path length differences between the midrange and tweeter.
With a vertical alignment (Figure 2-B), the path length difference
– 3 –
between the midrange and tweeter are reduced to a minimum. The result
is a negligible difference in path lengths between the midrange and
tweeter regardless of the proximity of the listener to the speakers.
Mounting the speaker with minimum path length difference will ensure
the best staging and imaging possible from your audio system.
I
N
INSTALLATION
S
T
A
L
L
A
T
I
O
N
+-
Mounting the Midrange
1. Cut the proper size hole for the midrange/woofer.
• For the 4” speaker, cut a 90mm (39⁄ ") diameter hole
16
• For the 5-1/4” speaker, cut a 114mm (415⁄ ") diameter hole
32
• For the 6” speaker, cut a 129mm (51⁄ ") diameter hole
• For the 6-1/2” speaker, cut a 139mm1(651⁄ ") diameter hole
2
2. Place the mounting ring over the mounting hole and mark the location
of the screw mounting holes.
3. Remove the ring. Drill the holes for the screws using a 1/8" drill bit.
4. Route the wire through the hole.
5. Attach the wires and be sure to observe the proper speaker polarity.
6. Place the mounting ring over the speaker.
7. Place the speaker into the hole and screw the speaker into place. Be
careful not to bend the speaker frame during this step.
8. Press the speaker grille into the mounting ring.
– 4 –
Flush Mount Tweeter
Trim
Ring
Back
Plate
Tweeter
Flush
Housing
Surface Mount Tweeter
Surface
Housing
Tweeter Trim
Ring
Back
Plate
Wedge Mount Tweeter
Tweeter
Wedge
Housing
– 5 –
Crossover Connections
High-Passing the Midrange
The fanaticP Component Systems are optimized for full range music repro-
duction. In cases where a subwoofer is used, the midrange can be high-
passed in order to prevent overlapping frequncies from the midrange into
the subwoofer.
1. Determine the frequency range that the subwoofer will play (i.e.: 20Hz-
80Hz).
2. Use the low-pass crossover frequency of the subwoofer system (i.e.:
80Hz) as the high-pass crossover frequency for the midrange.
3. Select the appropriate capacitor value (i.e.: 500µF) to properly high-pass
the midrange.
4. Place the capacitor in series with the "+" terminal of the speaker.
Frequency
(Hertz)
Speaker
(4 ohms)
C1
80Hz
100Hz
130Hz
200Hz
260Hz
400Hz
500µF
400µF
300µF
200µF
150µF
100µF
– 6 –
TROUBLE-S
H
O
O
T
I
N
G
TROUBLESHOOTING
Symptom
Diagnosis
Remedy
Wires between amplifier,
crossover, or speakers not
connected properly
Check wiring, and repair or
replace as needed
No sound from
speakers
Amplifier has no output
Check system with known
working amplifier and repair
or replace as needed
Speaker wires are shorted
to each other or to the
chassis of the vehicle
Check for shorts in the wiring
with a volt/ohm meter, and
repair or replace wires as
needed
Speakers are blown
Check system with known
working speaker, and repair or
replace as needed
Incorrect wiring between
crossover and speakers
Check wiring, and repair or
replace as needed
Distorted sound
from speakers
Excessive power from
amplifier
Tweeters “burn
up” easily
Check gain settings on ampli-
fier and readjust as necessary
Equalizer in system (if avail-
able) has excessive boost in
the high frequency range
Check settings on equalizer
and readjust as necessary
Engine noise
from one or
more speakers
Speaker wires shorted to
chassis of vehicle
Check for shorts in the wiring
with a volt/ohm meter, and
repair or replace wires as
needed
Speaker wires are routed
near radiated noise source
(power cables, vehicle com-
puters, etc.)
Re-route speaker wiring away
from noise sources (refer to
the Installation Considerations
section of this manual)
Crossover is mounted near
radiated noise source
(power cables, vehicle com-
puters, etc.)
Move crossovers away from
noise sources (refer to the
Installation Considerations
section of this manual)
– 7 –
SPECIFICATIONS
System Model Number FNP2414
FNP2514
FNP2614U
FNP2614
Midrange Model Number
FNP2404
4"
FNP2405
FNP2406U
6"
FNP2406
1
1
Nominal Diameter
5 ⁄ "
4
6 ⁄ "
2
Nominal Impedance
4Ω
4Ω
60Hz-6kHz
60Hz
4Ω
4Ω
55Hz-5kHz
55Hz
Frequency Response
100Hz-8kHz
100Hz
.907
61Hz-6kHz
61Hz
Fs (Hz)
Qes
.705
.701
.926
Qms
Qts
3.372
2.896
2.58
3.558
.715
.567
.551
.733
3
Vas (ft /liter)
.078/2.2
.09/2.4
84.9dB
50 Watts
90.48mm
.29/8.1
.11/2.9
86.4dB
50 Watts
.335/9.5
.11/2.9
86.8dB
50 Watts
129mm
.59/16.7
.11/2.9
87.1dB
50 Watts
139.06mm
Xmax (in/mm)
Sensitivity
RMS Power Handling
Mounting Diameter
113.50mm
15
9
1
1
(3 ⁄ ")
(4
⁄
")
(5 ⁄ ")
16
(5 ⁄ ")
2
16
32
3
3
3
45mm (1 ⁄ ")
4
1
63mm (2 ⁄ ")
2
Mounting Depth
45mm (1 ⁄4")
60mm (2 ⁄ ")
8
Model
FNP2401
Nominal Diameter
Nominal Impedance
Frequency Response
Fs
3/4" (20mm)
4Ω
2.8kHz-20kHz
2.8kHz
Sensitivity
91dB
RMS Power Handling
Mounting Diameter
Mounting Depth
50 Watts*
See drawings
See drawings
* Power Ratings (PE) is established with recom-
mended filter network
Model
FNP242x
2-Way
Crossover Type
Crossover Frequency
Crossover Slope
6.3kHz @ 4Ω
18dB/octave High-Pass
Full-Range Low-Pass
0.707 (Butterworth)
Optical Compression
See drawings
Filter Q
Tweeter Protection
Dimensions
(Specifications are subject to change without notice)
– 8 –
LIMITED WARRANTY INFORMATION
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
•
Length of Warranty
1 year on speakers
30 days on speaker B-stock (receipt required)
90 days on electronic B-stock (receipt required)
3 years on electronics
1 year on source units
•
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford
Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers
from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s
Distributor and not by Rockford Corporation.
•
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized
Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide
Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and
date of purchase.
•
Products found to be defective during the warranty period will be repaired or replaced (with a product
deemed to be equivalent) at Rockford's discretion.
•
What is Not Covered
1. Damage caused by accident, abuse, improper operations, water, theft
2. Any cost or expense related to the removal or reinstallation of product
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center
4. Any product which has had the serial number defaced, altered, or removed
5. Subsequent damage to other components
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer
•
•
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in dura-
tion to the period of the express warranty set forth above. Some states do not allow limitations on the
length of an implied warranty, so this limitation may not apply. No person is authorized to assume for
Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return
Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of
product to Rockford. Always include Proof of Purchase. Mark RA# on outside of shipping carton.
Ship to: Electronics
Ship to: Speakers
Rockford Corporation
Warranty Repair Department
2055 E. 5th Street
Rockford Acoustic Design
(Receiving-speakers)
609 Myrtle N.W.
Tempe, AZ 85281
RA#:_________________
Grand Rapids, MI 49504
RA#:_________________
– 9 –
LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTA-
LACIÓN DEL PRODUCTO.
INTRODUCCIÓN — ESPAÑOL
Este manual contiene información sobre la construcción, installación y fun-
cionamiento de los sistemas fanaticP. Le recomendamos que conserve el
manual para futuras consultas.
Es preferible que la instalación de sistema fanaticP sea realizada por un dis-
tribuidor autorizado Rockford Fosgate. Si prefiere realizar la instalación usted
mismo, asegurese de leer el manual en su totalidad antes de comenzar.
MONTAJE
Le mejor interacción entre tweeter y medio se
consigue si no están separados entre si más
no superior a 5cm
de 5 cenimetros (Figura 1).
Figura 1
I
N
S
T
A
L
L
A
T
I
O
N
INSTALACIÓN
+-
Montaje del altavoz de medios
– 10 –
1. Corte el agujero para el medio/woofer.
• Par el 102mm, corte un circulo de 90mm de diámetro
• Par el 133mm, corte un circulo de 114mm de diámetro
• Par el 152mm, corte un circulo de 129mm de diámetro
• Par el 165mm, corte un circulo de 139mm de diámetro
2. Use los anillos de montaje de plástico como plantilla. Marque la posi-
ción de los tornills de anclaje.
3. Quite el anillo y perfore los agujeros con una broca de 3mm.
4. Pase el cable de altavoz a través del agujero.
5. Conecte los cables observando la polaridad. Mantenga los cables aleja-
dos pe partes móviles o cortantes.
6. Monte el anillo de montaje sobre el medio/woofer.
7. Asegure el altavoz en la abertura con los tornillos. Tenga la precaución
de no doblar el marco del altavoz en este proceso.
8. Presione la rejilla en el anillo de montaje.
Positivo
de Mediorango
+
Negativo
cable Negro)
Negativo
de Mediorango
Positivo
de Agudo
Positivo
(cable Negro con
raya Blanca)
(Un canal del
amplificador)
Negativo
Tweeter
tweeter
– 11 –
VEUILLEZ LIRE LES INSTRUCITONS SUIVANTES POUR L'INSTALLA-
TION DE CES PRODUITS.
INTRODUCTION — FRANÇAIS
Ce manuel contient des informations sur les caractéristiques et l'installation
des systèmes fanaticP. Nous vous proposons de garder ce manuel pour
toute référence future.
Nous vous recommandons vivement de faire installaer votre système
punch fanaticP par un dealer agréé Rockford Fosgate. Si vous choisissez
d'installer le système vous même, assurez-vous de lire ce manuel entière-
ment avant de commencer.
EMPLACEMENT DE MONTAGE
Pour bénéficier d'une harmonie maximum
entre le médium et l'aigu l'éloignement entre
moins de 5cm
ces deux haut-parleurs devrait être de moins
de 5 cm entre les 2 chassis (Figure 1).
Figure 1
I
N
S
INSTALLATION
Montage du haut-parleur médium
T
A
L
L
A
T
I
O
N
+-
– 12 –
1. Découper un trou adapté au haut-parleur médium/woofer.
• Pour le 102mm, le diamètre du trou est de 90mm
• Pour le 133mm, le diamètre du trou est de 114mm
• Pour le 152mm, le diamètre du trou est de 129mm
• Pour le 165mm, le diamètre du trou est de 139mm
2. Placer l'anneau de montage sur le trou et repérer l'emplacement des
trous des vis.
3. Retirer l'anneau. Percer les trous des vis en utilisant une mèche de 3mm.
4. Faire passer les fils dans le médium/woofer.
5. Connecter les fils au haut-parleur en respectant les polarités. Eloigner les
fils de toute partie tranchante ou mobile du véhicule.
6. Placer l'anneau de montage au-dessus du trou central.
7. Placer le haut-parleur au-dussus du trou central. Visser le haut-parleur
dans son emplacement. Faire attention à ne pas tordre le chassis du
haut-parleur durant cette étape de montage.
8. Mettre la grille dans l'anneau de montage.
Positif
du médium
+
Négatif
âble noire)
Négatif
du médium
Positif
de l aigu
Positif
(c ble noire
rayé de blanc)
al
de l amplificateur)
Négatif
de l aigu
tweeter
– 13 –
DIE FOLGENDE BEDIENUNGSANLEITUNG SOLL IHNEN BEIM EINBAU
EINE HILFESTELLUNG GEBEN.
ENLEITUNG — DEUTSCH
Diese Bedienungsanleitung enthält Informationen für den Gebrauch und
Einbau des fanaticP Systems. Wir empfehlen, diese auch für Fragen in der
Zukunft sorgfältig aufzubewahren.
Es ist empfehlenswert, sich das fanaticP System von einem Autorisierten
Rockford Fosgate Fachhändler einbauen zu lassen. Sollten Sie den Einbau
jedoch selber vornehmen wollen, so empfehlen wir Ihnen, die
Bedienungsanleitung sorgfälitg zu lesen.
EINBAUORT
Für das optimale Zusammenspiel von Mittel-
Abstand max. 5cm
und Hochtöner, sollte der Hochtöner
niemals weiter als 5cm vorn Mitteltöner ent-
fernt montiert werden (Abb. 1).
Abb. 1
I
N
S
T
A
L
L
A
T
I
O
N
EINBAU
+-
Montage des Mitteltöners
– 14 –
1. Schneiden Sie die richtige Lochgröbe für den Mitteltöner oder Midbab
aus.
• Für den 102mm, schneiden Sie ein 90mm Ø Loch
• Für den 133mm, schneiden Sie ein 114mm Ø Loch
• Für den 152mm, schneiden Sie ein 129mm Ø Loch
• Für den 165mm, schneiden Sie ein 139mm Ø Loch
2. Setzen Sie den Montagering auf das Loch und markieren Sie die Löcher
für die Schrauben.
3. Nehmen Sie den Ring wieder ab und bohren Sie dann, mit einem
passenden Bohrer, die Schraubenlöcher vor.
4. Führen Sie das Kabel durch das Loch.
5. Schlieben Sie die Lautsprecherkabel an. Kontrollieren Sie, ob die
Polarität stimmt. Stellen Sie sicher, dab das Lautsprecherkabel an keinen
scharfen oder sich bewegenden Teilen anliegt.
6. Plazieren sie den Montagering über dem mitteltöners.
7. Plazieren Sie den Lautsprecher im Loch und befestigen Sie diesen. Seien
Sie dabei sehr vorsichtig, so dab sich der Lautsprecherkorb nicht
verzieht.
8. Drücken Sie das Lautsprechergitter im Montagering fest.
Mitteltöner
Plus
+
Minus
(Schwarzes Kabel)
Mitteltöner
Minus
Hochtöner
Plus
Plus
(Schwarz/Weiβ
gestreiftes Kabel)
(Ein Kanal
des Verstärkers)
Hochtö er
Minus
tweeter
– 15 –
LEGGERE LE ISTRUZIONI SEGUENTI PRIMA DELL'INSTALLAZIONE DEL
PRODOTTO.
INTRODUZIONE — ITALIANO
Questo manuale fornisce informazioni sulle caratteristiche e sul instal-
lazione dei sistemi fanaticP. Vi suggeriamo di conservare questo manuale
come riferimento futuro.
Raccomandiamo fortemente che is sistema sia installato dal vostro rivendi-
tore Rockford Fosgate. Se scegliete di procedere con l'installazione da soli,
leggete attentamente tutto il manuale prima di proseguire.
POSIZIONAMENTO
Per ottenere la miglior integrazione tra tweet-
meno di 5 cm
er e midrange, vi suggeriamo di posizionare
i due componenti a meno di 5 cm tra loro
(Figura 1).
Figura 1
I
N
S
T
A
L
L
A
T
I
O
N
INSTALLAZIONE
+-
Installazione del Midrange
– 16 –
1. Practicate un foro del diametro corretto per il midrange/woofer
• 102mm per 90mm
• 133mm per 114mm
• 152mm per 129mm
• 165mm per 139mm
2. Posizionate l'anello della griglia sul foro e segnate la posizione delle viti.
3. Togliete l'anello e forate il pannello con una puna da 3mm.
4. Passate i cavi attraverso il foro.
5. Collegate i cave assicurandovi di osservare la corretta polarità.
Assicuratevi di mantenere i cavi lontano da parti in movimento o strut-
ture taglienti.
6. L'anello della griglia sopra il foro dell midrange.
7. Posizionate l'altoparlante nel foro ed avvitatelo. Assicuratevi di non pie-
gare il cestello dell'altoparlante.
8. Incastrate la griglia sull'anello di fissaggio.
Positivo
Midrange
+
Negativo
Negativo
Midrange
Positivo
Tweeter
Positivo
cavo nero/
bianco)
Negativo
Tweeter
dell’amplificatore)
tweeter
– 17 –
– Notes –
– 18 –
– Notes –
– 19 –
– Notes –
– 20 –
MADE IN USA
This product is designed, developed and assembled in the USA by a
dedicated group of American workers. The majority of the components
used in the construction of this product are produced by American
companies. However, due to the global nature of their manufacturing
facilities and the loudspeaker parts industry in general, some parts may
be manufactured in other countries.
Rockford Corporation
546 South Rockford Drive
Tempe, Arizona 85281 U.S.A.
In U.S.A., (480) 967-3565
In Europe, Fax (49) 8503-934014
In Japan, Fax (81) 559-79-1265
2/01 B.M.
LIT11112A
|