Radio Shack PLCD58MP3 User Manual

OWNER'S MANUAL  
ANTI-SHOCK CD / MP3 PLAYER  
SUPER POWER OUTPUT & AUXILIARY INPUT  
CD CHANGER CONTROL  
FACE DETACHABLE PANEL  
FM-AM FM-MPX RADIO RECEIVER  
WITH REMOTE CONTROL  
MODEL: PLCD58MP3  
P / N : 570-981853-02  
DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M  
ESP 12/ ESP 45 (timing of electronic anti-shock for CD mode) (OPTIONAL)  
BEEP OFF/ BEEP ON (not available for this model)  
SEEK1 (tuneup/downbuttonperformsfasttunefunction)/SEEK2(performsautotuningfunctionwhentuneup/downbutton  
pressedmorethan1second)  
COLOR 1 / COLOR 2 (not available for this model)  
VOL LAST / VOL ADJ (preset volume level when unit turn on)  
16/17. AUDIO LEVEL DOWN/UP CONTROL ( - Button ) / ( + Button )  
Press “SEL” button shortly and then pressing “+” or “-” button to adjust level of volume, bass, treble, balance or fader.  
• VOLUME - Press the (+) button to increase, or (-) button to decrease volume level.  
• BASS - While “BASS” is being displayed, press (+) button to increase or (-) button to decrease the bass level.  
• TREBLE - While “TREB” is being displayed, press (+) button to increase or (-) button to decrease the treble level.  
• BALANCE - While “BAL” is being displayed, press (+) or (-) button to level balance of speaker right and left.  
• FADER - While “FAD” is being displayed, press (+) or (-) button to level fader of speaker front and rear.  
18/19. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL  
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1 second can  
performs fast tuning function or auto tuning function.  
On CD/MP3/CDC mode, press this button will locate the beginning of the track being played or will locate the beginning of the  
next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific position of a CD/MP3  
track.  
20. STATION PRESET BUTTON (1-6)  
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button can  
store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was  
memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW.  
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency will be  
stored in the button pressed. After this, the memorized station can be recalled by pressing the button once.  
On CD / MP3 / CD Changer Mode  
• Preset 1 - press this button to pause the disc played.  
• Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc.  
• Preset 3 - press this button to repeat the current track of the disc.  
• Preset 4 - press this button to play disc at random order - Disc shuffle play.  
• Preset 5 - press this button to search -10 track (for MP3 Mode only).  
- press this button to search previous disc numbers (for CD Changer Mode only).  
• Preset 6 - press this button to search +10 track (for MP3 Mode only).  
- press this button to search the disc numbers ahead (for CD Changer Mode only).  
INSTRUCTION TO PLAY MP3 SONGS  
IMPORTANT NOTES  
The MP3 file recording media acceptable to this unit are CD-R and CD-RW.  
TheMP3 formatsacceptablearelimited.  
Do not attempt to play a media containing non-MP3 files or non-MP3 files with MP3 extension. Otherwise, the CD Mechanism will  
not working properly. If “ERROR” is shown, it is suggested to reset the radio by presssing the reset button.  
PLAY ON MP3 SONG  
Insert the media with MP3 song in the disc slot. The unit will start playing and checks all the files and folder on the media.  
If MP3 files and directories are recognized, the media will start playing.  
The MP3 files and directories are accessed according to the order written by the CD writer.  
TRACK SEARCH  
Press “AMS” button once and “TRK SCH” will be shown on the display.  
Press “SEL” to enter track search mode and “001” will appear on the display for you to enter track number.  
Press “+” or “-” to shift number 0 – 9 in loop rotation.  
Press “SEL” shortly to select the first digit.  
Repeatthesameproceduretoentertheotherdigitsifrequired.  
Afterthetracknumberisselected, pressSELbuttonmorethan2secondstostartplayingtheselectedtrack.  
If track number is not entered within 10 seconds, the unit will continue playing the current file.  
FILES SEARCH  
Press “AMS” button twice and “FILE SCH” will be shown on the display  
PressSELtoenterfilesearchmode.  
Press “+” or “-” to view the directories.  
After the selected directory is selected, press “+” or “-” to view the files.  
PressSELtoplaytheselectedfile.  
Ifdirectoriesorfilesnameisnotenteredwithin10seconds, theunitwillcontinueplayingthecurrentfile.  
CHARACTER SEARCH (OPTIONAL)  
• Press “AMS” button 3 times and “CHAR SCH” will be shown on the display.  
• Press “SEL” to enter into character search mode and “A” will appear on the display for you to enter first character.  
• Enter whole name of files (maximum 8 characters) by pressing “+” or “-” to shift “A-Z”, “0-9” & “ ” (space) in loop rotation.  
• Press “SEL” shortly to select the first character.  
• Repeatthesameproceduretoentertheothercharactersifrequired.  
• Afterthewholenameoffileisentered, pressSELbuttonmorethan2secondstostartplayingtheselectedtrack.  
Remark :  
1) The media must contain directories or files name written by the CD writer in order to use in searching.  
2) If only partial letters are entered for searching either in directories or files name, you may not get it correctly.  
EXAMPLE OF FOUNDING THE FILE NAME OF “HIT 3”  
• “H” - press “+” button 7 times until “H” show on the display, then pressing “SEL” button for inputting the following character.  
• “I-press+button8timesuntil “Ishowonthedisplay, thenpressingSELbuttonforinputtingthefollowingcharacter.  
• “T-press-buttoncontinuouslyuntilTshowonthedisplay, thenpressingSELbuttonforinputtingthefollowingcharacter.  
• space-press-buttonuntil showonthedisplay, thenpressingSELbuttonforinputtingthefollowingcharacter.  
• “3-press-buttonuntil3showonthedisplay, thenpressingSELbuttonforinputtingthecharacter.  
Page. 3  
P / N : 570-981853-02  
WIRE CONNECTION  
RESET FUNCTION  
The RESET button is located at the back of the panel. It is  
recessed in order to prevent accidental engagement, and  
can be activated with the tip of a ball-point pen or any  
similar pointed object. This reset circuitry is provided in  
order to protect the unit's microprocessor, and should only  
be activated under the following conditions :  
a) Initial installation after all wiring is completed.  
b) Abnormal operation is encountered such as numerical  
indication on display is erratic.  
CAUTION : Do not connect the speaker wires to  
chassis or car body. Each speaker wire cannot be  
soldered together with other wires. Otherwise, the  
unit will be damaged and no sound will come out  
anymore.  
c) Whenever the reset button is activated, all preset  
memory content will be erased and must be  
reprogrammed.  
REMOTE CONTROL  
INSTALLATION  
CAUTION : DO NOT PLACE THE UNIT OVER THE  
MAXIMUM INSTALLATION ANGLE OF 30°.  
OTHERWISE, THE UNIT MAY NOT WORK  
PROPERLY.  
WARNING!!  
Due to protection of CD Mechanism, two small screws on the top  
of the unit must be released before operate the unit. Otherwise, the  
CD Mechanism can not be working properly.  
UNIT REMOVAL  
1. Remove Front Control Panel.  
2. Slightly insert the key into the slot and  
gently to release.  
3. Separate the sleeve from the unit. Keep  
release key in a safe place as you may  
need for future removal of unit.  
P / N : 570-981853-02  
Page. 4  
P / N : 570-981853-02  

Philips LCD MONITOR 220VW8 User Manual
Peavey Electronics Car Speaker SP 118 User Manual
Panasonic P2HD AG HPG20 User Manual
Panasonic Blu ray Player DMP BDT321 User Manual
Oster 2607 User Manual
Magic Bullet magic Magic10 User Manual
Kenwood KDC 6090R User Manual
Kenwood Car Stereo System TH 31BT User Manual
KATA KT A66N User Manual
JVC KS R600 User Manual