Radio Shack CID 947 User Manual

43-947.fm Page 1 Thursday, May 25, 2000 11:36 AM  
CID-947 79-Memory  
Caller ID Module  
with Backlight  
43-947.fm Page 3 Thursday, May 25, 2000 11:36 AM  
WARNING: To reduce the risk of fire or  
shock hazard, do not expose this product to rain  
or moisture.  
CAUTION  
RISK OF ELECTRIC SHOCK.  
!
DO NOT OPEN.  
CAUTION: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER OR BACK. NO USER-SERVICE-  
ABLE PARTS INSIDE. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
This symbol is intended to alert  
you to the presence of uninsu-  
lated dangerous voltage within  
the product’s enclosure that might  
be of sufficient magnitude to con-  
stitute a risk of electric shock. Do  
not open the product’s case.  
This symbol is intended to inform  
you that important operating and  
maintenance instructions are  
included in the literature accom-  
panying this product.  
!
The graphical symbols with supplemental mark-  
ings are located on the bottom of the module.  
3
43-947.fm Page 4 Thursday, May 25, 2000 11:36 AM  
ˆ Features  
Your RadioShack 79-Memory Caller ID Module with Backlight is  
the latest in telephone technology. The module displays the  
caller’s telephone number (and name, if available in your area)  
and the current date and time, as provided by your local phone  
company to Caller ID service subscribers. (The date and time  
are set with your first incoming Caller ID call.) Your module in-  
cludes these features:  
Caller ID Memory  
— the module stores and displays up to 79  
multiple (name and number) Caller ID records.  
Bright Illuminator Backlight  
— the display lights when you  
press any button, making it easy to view and change informa-  
tion even in a dimly-lit area.  
Dial Back  
— lets you redial a telephone number stored in the  
Caller ID call memory and VIP record memory.  
New Call Indicator  
— flashes when you have at least one new  
call you have not reviewed.  
VIP Call List  
— lets you save up to 20 important call records so  
they will not be deleted when you delete other calls from the  
module’s memory.  
Call Summary  
— displays the number of new calls you re-  
ceived.  
Easy Installation  
— the module easily connects to your tele-  
phone line so you can quickly begin using it.  
Record Scrolling  
– lets you easily look through all call records  
in Caller ID memory.  
4
Features  
43-947.fm Page 5 Thursday, May 25, 2000 11:36 AM  
Trilingual Operation  
— lets you set the module to display mes-  
sages in English, French, or Spanish.  
Large Liquid Crystal Display  
— makes it easy to see caller in-  
formation and the current time and date.  
Contrast Control  
— lets you adjust the display contrast for the  
best readability.  
Time and Date Display  
— displays the current time and date  
as provided to Caller ID service subscribers by your local tele-  
phone company.  
Mounting Options  
— you can place the module on a desk,  
shelf, or table, or mount it on a wall.  
Note:  
Your module requires four AAA batteries (not supplied) to  
protect its memory during a power outage.  
This module has been tested and found to comply with all appli-  
cable FCC standards and is ETL listed.  
To use this module, you must be in an area where Caller ID ser-  
vice is available and you must subscribe to the service.  
Where Caller ID is offered, one or more of the following options  
are generally available:  
• caller's number only  
• caller's name only  
• caller's name and number  
Your module displays the caller's name only if that option is  
available in your area.  
5
Features  
43-947.fm Page 6 Thursday, May 25, 2000 11:36 AM  
The actual number of Caller ID records your module will store  
depends on the amount of Caller ID information sent by the  
phone company.  
FCC INFORMATION  
This module has been tested and found to comply with all appli-  
cable FCC standards.  
We have designed your module to conform to federal regula-  
tions, and you can connect it to most telephone lines. However,  
each module (and each device, such as a telephone or answer-  
ing machine) that you connect to the telephone line draws pow-  
er from the telephone line. We refer to this power draw as the  
device’s ringer equivalence number, or REN. The REN is on the  
bottom of your module.  
If you use more than one phone or other device on the line, add  
up all of the RENs. If the total is more than five (or three in rural  
areas), your telephones might not ring. If ringer operation is im-  
paired, remove a device from the line.  
Your module complies with Part 68 of FCC Rules. You must,  
upon request, provide the FCC registration number and the  
REN to your telephone company. Both numbers are on the bot-  
tom of the module.  
Note:  
You must not connect your module to:  
• coin-operated systems  
• party-line systems  
• most electronic key telephone systems  
6
Features  
43-947.fm Page 7 Thursday, May 25, 2000 11:36 AM  
This equipment complies with the limits for a Class B digital de-  
vice as specified in Part 15 of FCC Rules. These limits provide  
reasonable protection against radio and TV interference in a  
residential area. However, your equipment might cause TV or  
radio interference even when it is operating properly. To elimi-  
nate interference, you can try one or more of the following cor-  
rective measures:  
• reorient or relocate the receiving antenna  
• increase the distance between the equipment and the radio  
or TV  
• use outlets on different electrical circuits for the equipment  
and the radio or TV  
Consult your local RadioShack store if the problem still exists.  
7
Features  
43-947.fm Page 8 Thursday, May 25, 2000 11:36 AM  
ˆ Preparation  
Your module’s display is protected by a piece of plastic film dur-  
ing shipment. Peel off this film before you use the module.  
INSTALLING BATTERIES  
Your module requires four AAA batteries (not supplied) to pro-  
tect its memory during a power failure. For the best perfor-  
mance and longest life, we recommend RadioShack alkaline  
batteries.  
Cautions:  
• Use only fresh batteries of the required size and recom-  
mended type.  
• Do not mix old and new batteries or different types of bat-  
teries (standard, alkaline, or rechargeable), or recharge-  
able batteries of different capacities.  
• When you replace the batteries, do not press any buttons  
on the module after you remove the old batteries. Doing so  
could erase all stored information.  
• When replacing the batteries, have fresh ones on hand  
before you begin. If you do not install the new batteries  
within about 2 minutes after removing the old ones, you will  
lose all the information stored in the module.  
Follow these steps to install batteries.  
1. If you are replacing batteries, unplug the module from the  
telephone line, the telephone, and AC power. Unplug both  
modular line cords from the back of the module.  
8
Preparation  
43-947.fm Page 9 Thursday, May 25, 2000 11:36 AM  
2. Use a Phillips screwdriver to remove the screw from the  
battery compartment cover.  
3. Slide the battery compartment cover in the direction of the  
arrow until it stops, then lift up the cover.  
Caution:  
The battery compartment cover is attached to the  
module. Do not try to remove it completely.  
4. Place the batteries in the compartment, as indicated by the  
polarity symbols (+ and –) marked inside.  
5. Close the cover and secure it with the screw. If you are  
replacing the batteries, reconnect the phone line, AC  
adapter, and the phone.  
BATT  
When  
(battery) appears or the display dims, replace the  
batteries.  
Warning:  
Dispose of old batteries promptly and properly. Do  
not burn or bury them.  
9
Preparation  
43-947.fm Page 10 Thursday, May 25, 2000 11:36 AM  
Caution:  
If you do not plan to use the module for a month or  
more, remove the batteries. Batteries can leak chemicals that  
can destroy electronic parts.  
CONNECTING THE AC ADAPTER  
The module uses the supplied 9V, 200-mA AC adapter for pow-  
er.  
Cautions:  
You must use a Class 2 power source that sup-  
plies 9V DC and delivers at least 200 mA. Its plug  
!
9V DC 200mA  
must fit the module's  
jack. The sup-  
plied adapter meets these specifications. Using an adapter  
that does not meet these specifications could damage the  
module or the adapter.  
• Always connect the AC adapter to the module before you  
connect it to AC power. When you finish, disconnect the  
adapter from AC power before you disconnect it from the  
module.  
• The supplied adapter was designed specifically for your  
module. Use only the supplied adapter.  
9V DC  
To power the module, plug the adapter’s barrel plug into  
200mA  
on the back of the module. Then connect the other end  
of the adapter to a standard AC outlet.  
10  
Preparation  
43-947.fm Page 11 Thursday, May 25, 2000 11:36 AM  
CONNECTING THE MODULE  
Your module connects to any modular phone jack and your  
phone. You can also connect it to an answering machine.  
Note:  
The module might not work with older phones, such as  
Western Electric phones.  
Connecting to a Single-Line Phone  
TO PHONE  
9V DC 200mA  
TO LINE  
1. Disconnect the telephone line cord from the phone and  
TO LINE  
plug it into the module’s  
jack.  
TO  
2. Plug one end of the supplied line cord into the module’s  
PHONE  
jack.  
3. Plug the other end of the cord into the phone’s jack.  
Connecting to a Two-Line Phone  
To record information about calls received on a two-line phone,  
you can connect two CID-947 modules using a triplex adapter.  
Each module only records information about calls received on  
the line to which it is connected.  
11  
Preparation  
43-947.fm Page 12 Thursday, May 25, 2000 11:36 AM  
Follow these steps to connect two CID-947 modules to a two-  
line phone.  
Triplex  
Adapter  
L1 L2  
L1+L2  
1. Disconnect the telephone line cord from the modular phone  
jack (on the wall) and plug it into L1+L2 on the triplex  
adapter.  
2. Plug the triplex adapter into the modular phone jack.  
TO LINE  
3. Plug one end of the supplied line cord into the  
on one of the modules.  
jack  
4. Plug the other end of the cord into either L1 or L2 on the tri-  
plex adapter.  
5. Repeat Steps 3 and 4 to connect another module to the  
remaining open jack (L1 or L2) on the triplex adapter.  
12  
Preparation  
43-947.fm Page 13 Thursday, May 25, 2000 11:36 AM  
Connecting to an Answering Machine  
To Phone  
TO LINE  
TO PHONE  
1. Disconnect the phone line cord that connects your answer-  
ing machine to the phone line from the answering  
TO LINE  
machine’s jack. Then plug it into the module’s  
jack.  
TO  
2. Plug one end of the supplied line cord into the module’s  
PHONE  
jack.  
3. Plug the cord’s other end into the answering machine’s  
jack.  
4. Set your answering machine to answer after two or more  
rings. This gives the module time to record the call informa-  
tion that the phone company sends between the first and  
second rings.  
MOUNTING THE MODULE  
You can place the module directly on a desk, shelf, or table by  
itself or using the stand on the supplied mounting bracket. Or,  
you can use the bracket to mount the module on a wall.  
13  
Preparation  
43-947.fm Page 14 Thursday, May 25, 2000 11:36 AM  
Attaching the Mounting Bracket  
1. Align the slots on the bottom of the module with the hooks  
on the mounting bracket.  
2. Gently push the module down on the bracket to secure it.  
If you are placing the module on a desk, shelf, or table, pull out  
the stand on the back of the bracket until it clicks.  
To remove the module from the bracket, press up from the bot-  
tom of the module until it snaps off the bracket.  
Mounting on a Wall  
To mount the module on the wall, you need two screws (not  
supplied) with heads larger than the keyhole slots on the back  
of the mounting bracket.  
1. Using the keyhole slots in the supplied mounting bracket as  
a template, mark the mounting screw locations on the wall.  
2. Drill a hole in the wall at each marked location.  
3. Thread a screw through each hole, letting the head extend  
1
8
/ -inch (3.5-mm) from the wall.  
14  
Preparation  
43-947.fm Page 15 Thursday, May 25, 2000 11:36 AM  
4. Attach the mounting bracket to the module (see “Attaching  
the Mounting Bracket” on Page 14).  
5. Route the phone line cords and AC adapter cord through  
the slots on the back of the bracket.  
6. Align the keyhole slots on the bracket with the screws in  
the wall, then slide the module down onto the screws until it  
is secure.  
ADJUSTING THE DISPLAY CONTRAST  
ERASE  
RE-  
To lighten or darken the display, hold down  
and  
appears. Repeatedly  
to increase the contrast.  
VIEW  
CONTRAST ADJUST  
until  
REVIEW  
press  
15  
Preparation  
43-947.fm Page 16 Thursday, May 25, 2000 11:36 AM  
CHOOSING A LANGUAGE  
Your module is programmed to display messages in English,  
but you can change it to display in French or Spanish.  
REVIEW  
CALL BACK  
1. Hold down  
and  
for about 3 sec-  
ENGLISH ESPANOL  
FRANCAISfor French) appears.  
onds until the current language (  
Spanish, or  
,
for  
REVIEW  
2. Repeatedly press  
until the language you want  
to set the language you  
REVIEW  
appears, then press  
selected.  
Note:  
If you do not press any button within about 10 seconds,  
the time (if set) appears.  
SETTING YOUR LOCAL AREA CODE  
REVIEW  
REVIEW  
1. Hold down  
and  
together until  
LOCALAREACODE  
appears.  
2. To change the area code’s first digit, repeatedly press  
REVIEW  
until the desired digit appears, then press  
to confirm.  
ERASE  
3. Repeat Step 2 to set the area code’s second and third digit.  
4. To set the area code, do not press any button. Or, press  
REVIEW  
to set the module to its idle mode.  
16  
Preparation  
43-947.fm Page 17 Thursday, May 25, 2000 11:36 AM  
ˆ Operation  
RECEIVING AND STORING CALLS  
Caller ID is a service provided by your telephone company.  
When you subscribe to this service, the telephone company  
sends the caller’s telephone number (and name, if available)  
and the call’s date and time between the first and second rings.  
The module receives and displays this information for each call  
and updates the display with the current date and time. Your  
module saves up to 79 call records, then replaces the oldest  
call record with each new one.  
During an incoming call, the new call indicator on the right side  
of the module flashes, the display lights, and NEWand the total  
number of calls appear. During an incoming VIP call, the new  
call indicator flashes continuously.  
REVIEWING CALL RECORDS  
Each time you receive a call, the module saves a call record in  
memory that you can see while you are on the phone or review  
later.  
Each call record includes the time and date of the call, the call  
number (the order in which the call is received), the caller’s tele-  
phone number, and the caller’s name (if available).  
To scroll through the call records, repeatedly press (or hold  
REVIEW  
REVIEW  
down)  
or  
.
Notes:  
NOCALL  
• If no call information is stored,  
appears when you  
17  
REVIEW  
REVIEW  
press  
or  
.
Operation  
43-947.fm Page 18 Thursday, May 25, 2000 11:36 AM  
• If you do not press a button within about 10 seconds, the  
module automatically returns to the time and date display.  
• After you review all calls, ENDOFLISTappears. Simply  
REVIEW  
REVIEW  
press  
or  
to view again.  
Displayed Call Information  
The module can display the following information.  
Display (English,  
Description  
French, Spanish)  
Appears with a number if you have  
received a call from the same phone  
number more than once (between 2  
and 9 times).  
REPT  
Appears along with LDC(long dis-  
tance call) if your phone company  
sends information indicating that the  
incoming call is long distance.  
LONG DISTANCE  
LONGUE DISTANCE  
LARGA DISTANCIA  
The incoming call is from a area that  
does not send Caller ID name informa-  
tion.  
–UNKNOWN NAME–  
–NOM INCONNU–  
NOM DESCONOCIDO  
The incoming call is from an area that  
does not send Caller ID number infor-  
mation.  
UNKNOWN NUMBER  
NUMERO INCONNU  
NUM DESCONOCIDO  
The incoming call is from an area that  
does not send any Caller ID informa-  
tion.  
UNKNOWN CALLER  
APPELER INCONNU  
DESCONOCIDO  
18  
Operation  
43-947.fm Page 19 Thursday, May 25, 2000 11:36 AM  
Display (English,  
French, Spanish)  
Description  
Appears when you received a call for  
the first time.  
CALL 1  
The caller has blocked the Caller ID  
name information from being sent.  
–BLOCKED NAME–  
–NOM BLOQUE–  
NOMBRE PRIVADO  
The caller has blocked the Caller ID  
number information from being sent.  
BLOCKED NUMBER  
–NUMERO BLOQUE–  
NUMERO PRIVADO  
The caller has blocked any Caller ID  
information from being sent.  
BLOCKEDCALL  
APPEL BLOQUE  
LLAMADA PRIVADA  
Call information was distorted before  
reaching the module. Normal static on  
the telephone can cause this message.  
If it happens often, contact your phone  
company.  
–SERVICEERROR–  
ERREUR DE LIGNE  
ERROR EN LINEA  
Appears when battery level is low.  
BATT  
No call information is stored in the  
module.  
–NO CALL–  
–PAS D APPEL–  
–NO LLAMADA–  
The module has received incoming  
calls that have not been reviewed.  
NEW  
NOUV  
NUEVO  
The total number of received calls  
which have not been reviewed.  
#NEW  
19  
Operation  
43-947.fm Page 20 Thursday, May 25, 2000 11:36 AM  
Display (English,  
French, Spanish)  
Description  
The total number of incoming calls (not  
including VIP calls).  
TOTAL  
TOT.  
TOTAL  
The caller ID record is stored in VIP  
memory.  
–RECORD STORED–  
–MEMORISE–  
–MEMORIZADO–  
VIP memory is active.  
VIP  
Appears when the VIP number mem-  
ory is full.  
–VIP MEMO FULL–  
–VIP PLEIN–  
–VIP LLENO–  
Delete all Caller ID records from mem-  
ory except VIP records.  
DELETE ALL?  
EFFACER TOUT?  
BORRAR TODO?  
Call information was not sent by the  
phone company.  
–NO DATA SENT–  
PAS DE DONNEES  
–NO ENVIADO–  
Appears when you have message  
waiting.  
M MESSAGE  
WAITING  
or  
M MESSAGE  
or  
M MENSAJE  
or  
End of the list of stored Caller ID  
records.  
–END OF LIST–  
–FIN DE LISTE–  
–FIN DE LISTA–  
20  
Operation  
43-947.fm Page 21 Thursday, May 25, 2000 11:36 AM  
Display (English,  
French, Spanish)  
Description  
The module is dialing a stored Caller  
ID record.  
DIALING  
COMPOSER  
MARCAR  
Appears when you set the area code.  
LOCAL AREA CODE  
INDICATIF  
PREFIJO  
REDIALING FROM CALL RECORD MEMORY  
You can redial a telephone number stored in the Caller ID’s  
memory.  
REVIEW  
REVIEW  
1. Press  
record.  
or  
to view the desired call  
2. Lift your phone’s handset and check for a dial tone.  
CALL BACK  
3. Press  
to redial the telephone number. If the  
number to be redialed is out of your area code, dial 1 on  
CALL BACK  
your phone before pressing  
DELETING CALLS  
.
Deleting a Single Call  
REVIEW  
1. Repeatedly press (or hold down)  
or  
REVIEW  
until you see the call record you want to  
delete.  
ERASE  
2. Press  
. The module deletes that record and auto-  
matically renumbers the remaining call records. After 10  
seconds, the time and date reappear.  
21  
Operation  
43-947.fm Page 22 Thursday, May 25, 2000 11:36 AM  
Deleting All Calls  
1. While the module displays the time and date, press  
REVIEW  
REVIEW  
or  
.
ERASE  
DELETEALL?  
appears.  
2. Hold down  
until  
DELETE ALL? appears, press ERASE again. NO  
appears. Or, to cancel the deletion, do not press any  
While  
CALL  
button. After about 5 seconds, DELETEALL?disappears.  
VIP CALL LIST  
Your system lets you save up to 20 call records in its VIP call list  
so they will not be deleted if you delete all calls from the sys-  
tem’s memory. This lets you save a list of important callers.  
Follow these steps to store call records in the VIP call list.  
REVIEW  
REVIEW  
1. Repeatedly press  
or  
until you  
see the call record you want to store as a VIP call.  
VIP MEM  
2. Hold down  
until VIP flashes and RECORD  
STOREDappears. The system stores the call record as a  
VIP call record.  
22  
Operation  
43-947.fm Page 23 Thursday, May 25, 2000 11:36 AM  
Notes:  
• If the system’s memory is full (20 VIP call records are  
already stored), VIP MEMO FULL appears when you  
VIP MEM  
press  
. To store another VIP call record, you  
must first delete an existing one.  
• If you save a call record as a VIP call record, the total  
number of call records decreases by 1.  
VIP MEM  
To review VIP call records, press  
, then repeatedly  
REVIEW  
REVIEW  
press  
or  
.
VIP MEM  
To delete a VIP call record, press  
record you want to delete, then press  
, select the call  
ERASE  
.
VIP MEM  
To delete all entries from the VIP call list, press  
, then  
ERASE  
ERASE  
hold down  
. DELETE ALL? appears. Press  
again to confirm. Or, to cancel deletion, do not press any but-  
ton. After about 5 seconds, DELETEALL?disappears.  
23  
Operation  
43-947.fm Page 24 Thursday, May 25, 2000 11:36 AM  
ˆ Troubleshooting  
If your system is not working as it should, these suggestions  
might help you eliminate the problem.  
Problem  
Solution  
Blank screen  
The module is not receiving power.  
Make sure the batteries are installed  
and the AC adapter is plugged in.  
Adjust the contrast as described in  
“Adjusting the Display Contrast” on  
Page 15.  
You have an incoming  
call, but do not receive  
any Caller ID information.  
You answered the call before the  
module received the call information.  
Wait until your phone rings at least 2  
times before answering a call.  
No dial tone on the phone  
attached to the module.  
Check all wires and cables to make  
sure that all connections are secure.  
Check your phone line by discon-  
necting the module then reconnect-  
ing the phone and checking for a dial  
tone.  
If you see a message that you do not understand, see “Dis-  
played Call Information” on Page 18.  
24  
Troubleshooting  
43-947.fm Page 25 Thursday, May 25, 2000 11:36 AM  
ˆ Care and Maintenance  
Your  
RadioShack 79-Memory Caller ID Module with Backlight  
is an example of superior design and craftsmanship. The fol-  
lowing suggestions will help you care for your module so you  
can enjoy it for years.  
Keep the module dry. If it gets wet, wipe it dry im-  
mediately. Liquids might contain minerals that can  
corrode the electronic circuits.  
Use and store the module only in normal tempera-  
ture environments. Temperature extremes can  
shorten the life of electronic devices, damage bat-  
teries, and distort or melt plastic parts.  
Keep the module away from dust and dirt, which  
can cause premature wear of parts.  
Handle the module gently and carefully. Dropping it  
can damage circuit boards and cases and can  
cause the module to work improperly.  
Use only fresh batteries of the required size and  
recommended type. Batteries can leak chemicals  
that damage your module’s electronic parts.  
Wipe the module with a damp cloth occasionally to  
keep it looking new. Do not use harsh chemicals,  
cleaning solvents, or strong detergents to clean the  
module.  
25  
Care and Maintenance  
43-947.fm Page 26 Thursday, May 25, 2000 11:36 AM  
Modifying or tampering with the module’s internal components  
can cause a malfunction and might invalidate its warranty and  
void your FCC authorization to operate it. If your module is not  
performing as it should, take it to your local RadioShack store  
for assistance. If the trouble is affecting the telephone lines, the  
phone company can ask you to disconnect your module until  
you have resolved the problem.  
THE FCC WANTS YOU TO KNOW  
In the unlikely event that your module causes problems on the  
phone line, the phone company can temporarily discontinue  
your service. If this happens, the phone company attempts to  
notify you in advance. If advance notice is not practical, the  
phone company notifies you as soon as possible and advises  
you of your right to file a complaint with the FCC.  
Also, the phone company can make changes to its lines, equip-  
ment, operations, or procedures that could affect the operation  
of this module. The telephone company notifies you of these  
changes in advance, so you can take the necessary steps to  
prevent interruption of your telephone service.  
LIGHTNING  
Your module has built-in protection circuits to reduce the risk of  
damage from surges in telephone line and power line current.  
These protection circuits meet or exceed the FCC require-  
ments. However, lightning striking the telephone or power lines  
can damage your module.  
Lightning damage is not common. Nevertheless, if you live in an  
area that has severe electrical storms, we suggest that you un-  
plug your module when storms approach to reduce the possibil-  
ity of damage.  
26  
Care and Maintenance  
43-947.fm Page 27 Thursday, May 25, 2000 11:36 AM  
ˆ Notes  
27  
Notes  
43-947.fm Page 28 Thursday, May 25, 2000 11:36 AM  
Limited One-Year Warranty  
This product is warranted by RadioShack against manufacturing defects in material  
and workmanship under normal use for one (1) year from the date of purchase from  
RadioShack company-owned stores and authorized RadioShack franchisees and  
dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS  
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED  
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES  
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL  
HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER  
PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE  
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE  
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUD-  
ING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-  
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY  
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF  
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow limitations on how long an implied warranty lasts or the  
exclusion or limitation of incidental or consequential damages, so the above limita-  
tions or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the  
RadioShack sales receipt as proof of purchase date to any RadioShack store. Ra-  
dioShack will, at its option, unless otherwise provided by law: (a) correct the defect  
by product repair without charge for parts and labor; (b) replace the product with  
one of the same or similar design; or (c) refund the purchase price. All replaced  
parts and products, and products on which a refund is made, become the property  
of RadioShack. New or reconditioned parts and products may be used in the perfor-  
mance of warranty service. Repaired or replaced parts and products are warranted  
for the remainder of the original warranty period. You will be charged for repair or  
replacement of the product made after the expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to  
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow  
instructions, improper installation or maintenance, alteration, lightning or other inci-  
dence of excess voltage or current; (b) any repairs other than those provided by a  
RadioShack Authorized Service Facility; (c) consumables such as fuses or batter-  
ies; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f)  
costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor,  
Fort Worth, TX 76102  
We Service What We Sell  
12/99  
RadioShack — A Division of  
Tandy Corporation  
Fort Worth, Texas 76102  
43-947  
04A00  
Printed in China  

Panasonic CQ DF203U User Manual
Orion Car Audio 275XTR User Manual
Optimus 12 1717 User Manual
Nixon Camcorder D3s User Manual
Nikon SB 11 User Manual
MTX Audio TA3404 User Manual
Middleby Marshall PS360 User Manual
Lochinvar PB 1002(M9) User Manual
Kenwood KDC 4051UG User Manual
JVC KD G615 User Manual