7”Two Screen Car DVD Player
PDM-2726M
User’s Manual
20060901
Important Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Maintain well ventilated conditions around the
product, Do not put product on bed, sofa or anything that blocks ventilation. Install
in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Note: Do not touch the color TFT LCD screen by hand directly.
2
Important Safety
Instructions
Copyright Protection
This product incorporates copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the unit. Leave all
servicing to qualified service personnel.
Region code information
DVD players and discs are coded by region. If the region number described on the DVD
disc does not correspond to the region number of this product, this product cannot play
the disc. The region code of this unit is 4.
3
Features
High-quality audio and video
Excellent sound: Dolby Decoder
delivers great sound.
AV Out: Analog audio output and
video output.
Advanced Playing Functions
Compatibility: Compatible with
DVD, CD and JPEG.
On-screen Display: You can
choose English, French or Spanish
for the On-screen Display language.
Particular
Multi-speed, fast forward, fast
backward and slow forward.
Performance:
Search by Time: Search for
certain track of a disk by selected
time.
a
Last
Memory
Playback:
Special
screen aspect ratio changing,
screen saver, multi-languages
subtitle, multi-angles etc. functions.
Functions:
Supports
Memorizes the stopped playback
track and continues playing the disk
from this spot when the power is
kept to supply. (Only available for
DVD and CD disc).
4
Accessories
Accessories List
ITEM
NAME
QTY
1
Remote Control（with battery）
Car Adapter
1
1
Power Supply Cord
Strap
4
Headphone
2
2
Audio/Video Cable
Owner’s Manual
Power Adapter
1
1
NOTE
Accessories and their parts numbers are subject to modification without prior notice due
to improvements.
5
Contents
Important Safety Instructions
Features
…………………………………………..1
…………………………………………...4
…………………………………………...5
…………………………………………...7
…………………………………..……….9
…………………………………………..11
…………………………………………..12
…………………………………………..14
…………………………………………..15
…………………………………………..17
…………………………………………..18
…………………………………………..19
…………………………………………..20
Accessories
View of Front Panel
View of Side Panels
View of Main Unit Bottom
View of Remote Control
Battery Installation for RC
System Connections
Power Supply Preparation
Notes on Discs
Playback Operation
DVD Playback
CD Playback
…………………………………………..24
…………………………………………..26
…………………………………………..28
…………………………………………..32
JPEG Playback
System Setup
Use of Straps
Definitions
…………………………………………..34
…………………………………………..35
…………………………………………..37
Troubleshooting
Specifications
6
View of Front Panel
1. -/+ button
Press to adjust the value of brightness and color.
2. AUDIO button
Press to select different languages when a DVD disc which contains multiple audio
languages is played. Press to select different audio track when a CD disc is played.
3. FUNC button
Press the FUNC button to change the brightness and color level. Press and hold for
1-2 seconds to change the aspect ratio between 16:9 and 4:3.
4. SLOW button
Press to activate the slow playback function.
5.
A-B Repeat button
Press to play a certain selected segment repeatedly.
7
View of Front Panel
6.
■ (Stop) button
Press to stop playback. Then press the
button to resume playback from the
stopped spot. Press this button twice to stop playback completely.
(PLAY/PAUSE) button
7.
8.
9.
Press once to pause the playback and press it again to resume the playback.
▲/ꢀ button
Press to select different options or to search forward fast.
►/ꢁ button
Press to select different options or to skip to the next list, track or chapter.
10. ENT button
Press to access playback or confirm your selection.
11. ▼/ꢂ button
Press to select different options or to search backward fast.
12. ◄/ꢃ button
Press to select different options or to return to the previous list, track or chapter.
13. MENU button
Press to access to or exit from the menu.
14. Setup button
Press to enter the player’s system setup.
15. TITLE button
Press to access to or exit from the title menu if it exists in the disc.
16. Remote Control Sensor
17. Speaker
18. LCD Screen
8
View of Side Panels
Right Side View
1. Volume Control
Used to adjust the volume of the headphone and speaker.
2. Headphone Jack
Used to connect headphones for private listening. When the headphones are
connected to this jack, the speaker will be turned off automatically.
3. Audio Output Jack
Used to connect to an external amplifier.
4. Video Output Jack
Used to connect to an external monitor.
5. DC 9.5V Input Jack
Used to connect the car power adapter.
6.
7.
OPEN Switch
Push to open the disc tray cover.
Disc tray cover
When the disc is loaded gently, press the cover to close it.
9
View of Side Panels
Left Side View
1. Headphone Jack
Used to connect headphones for private listening. When the headphones are
connected to this jack, the speaker will be turned off automatically.
Power Switch
2.
Used to turn the power on or off.
10
View of Main Unit Bottom
1. Rechargeable Battery Contacts
For connecting the rechargeable battery pack.
11
View of Remote Control
1. MUTE button
Press to turn off or on the speaker output.
2. INFO button
Press repeatedly to display or conceal the detailed information of the disc during
playback.
3. TITLE button
Press to access to or exit from the title menu if it exists in the disc.
4. Direction button
Press to select different options.
5. ENTER button
Press to access playback or confirm your selection.
6. SETUP button
Press to enter the player’s setup menu.
7. 0-9 number buttons
Press to select number.
12
View of Remote Control
8. ꢁ NEXT button
Press to skip to the next list, track or chapter.
9. ꢃ PREV button
Press to return to the previous list, track or chapter.
10. SUBT button
When playing a DVD coded with multi-subtitles, press to select a subtitle language
or to turn subtitles off.
11. ANGLE button
Press to access various camera angles if the DVD disc contains multiple camera
angles.
12. A-B button
Press to play a section of the disc from point A to point B. Press once to select the
starting point A, press again to select the end point B. During A-B repeat playback,
press this button to stop the repeat.
13. ZOOM button
Press to realize various zoom functions.
14. REP button
Press to repeat a chapter, title, the entire disc or close this function.
15. MENU button
Press to access to or exit from the menu during playback.
16. PAUSE button
Press to pause playback. Press the PLAY button to resume normal playback.
17. STOP button
Press to stop playback. Then press the PLAY button to resume playback from the
stopped spot. Press this button twice to stop playback completely.
18. PLAY button
Press to start playback.
19. +10 button
Press this button first and then the additional number buttons as needed to select
number greater than 9.
20. GOTO button
Press to select the desired title, chapter or playback start time.
21. ꢂ REV SCAN button
Press to search backward fast during playback.
22. ꢀ FWD SCAN button
Press to search forward fast during playback.
23. SLOW button
Press to activate slow playback function.
24. AUDIO button
Press to select different languages when a DVD disc with multiple audio languages
is played. Press to select different audio track when a CD disc is played.
13
Battery Installation for
Remote Control
Installation Steps
Follow the steps below to install the battery.
Step1: Pull the battery holder out from the remote
control in the direction of the arrow.
Step 2: Load a new battery properly with
the (+) side up.
Step3: Insert the battery holder back into
the remote control.
Battery Property
Battery Type: CR2025 3V
Battery Life: Approximately 1 year under normal use (at room temperature).
Caution
1.
Improper use of the battery may cause overheating, explosion or ignition, which
can result in an injury or fire. Battery leakage may damage the remote control.
2. Do not expose the remote control unit to direct sunlight.
3. Do not recharge, disassemble, deform or heat the battery.
4. Do not put the battery in fire or water.
5.
Immediately replace the exhausted battery.
14
System Connections
z
z
Always ensure that the DVD player, TV and any other electrical equipment to be
connected with are switched off and unplugged from the power supply.
Ensure that you observe the color coding when connecting audio and video
cables.
Connecting to TV
Audio/Video connections
Follow the drawings below to connect the DVD player to TV's Audio/Video inputs with
Audio/Video cables.
15
System Connections
Connecting to Amplifier
Refer to your Audio equipment's manual before connection.
Follow the drawings below to connect the DVD player to AV amplifier.
Connecting to Headphones
Connect the headphones to the right side of the player for private listening.
When headphone is connected, the speakers will automatically turn off.
16
Power Supply Preparation
Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery.
1. Connect AC adapter to the right side
of the DVD player in the jack marked
DC 9.5V IN, as shown on the right.
2. Plug the other end of the power cord
into the wall AC outlet.
NOTE: Turn player's power off before unplugging.
Using of Car Adapter
The player is supplied with a Car Adapter for powering the unit while in a vehicle.
Connect the Car Adapter Power Plug to
the unit’s power jack and plug the other
end to the vehicle’s cigarette socket, as
shown right.
Attention
¾
¾
¾
Do not operate the unit or view video software while driving a vehicle.
Place the unit in a proper position for viewing.
Disconnect the player from the Car Adapter when starting the vehicle.
17
Notes on Discs
Compatible Disc Formats
PLAYBACK TIME/
DISC LOGO
DIAMETER
PLAYABLE SIDES
133 min (SS-SL)
242 min (SS-DL)
266 min (DS-SL)
484 min (DS-DL)
41 min (SS-SL)
75 min (SS-DL)
82 min (DS-SL)
150 min (DS-DL)
12cm
8cm
DVD
12cm
8cm
74 min
20 min
CD
JPEG
12cm
Operation methods of some DVD discs are specified by the software manufacturer.
Please follow the instructions of those discs.
Care of Discs
Holding Discs
When loading or removing discs, do not touch their playing surfaces as
the right figure.
Cleaning
Fingerprints or stain on the disc may affect the quality of sound and
picture. To clean your discs, use a soft clean cloth to wipe them. If
necessary, moisten a soft cloth with diluted neutral detergent to remove
heave dirt or fingerprints.
Do not wipe in a circular direction as the figure in the right middle
(concentric scratches on the disc groove tend to cause noise). Gently
wipe from the center of the disc to the outer edge as the right figure.
18
Playback Operation
READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD
PLAYER FOR THE FIRST TIME.
WARNING: Do not play poor-quality discs to avoid damaging the lens.
Pre-operation
1. Connect the unit to power supply through the provided DC adaptor.
2. Switch “POWER ON/OFF” to “ON” on the left panel to turn on the DVD player.
3. Press OPEN button on the unit to open the disc tray cover, put a disc in the disc tray
with printed side facing up. Close the disc cover. (See below)
4. The player will read the disc automatically.
5. Adjust the volume with the VOLUME control on the right panel to the desired level.
6. To turn the player off, switch the “POWER ON/OFF” on the left panel to “OFF”.
Using of General Button
Press the FUNC button to change the brightness and
color level. Adjust these values with + and - buttons on
the front panel. Press and hold the FUNC button for
FUNC button
about 1 or 2 seconds to change the aspect ratio
between 16:9 and 4:3. See the below for details.
19
Playback Operation
DVD Playback
Buttons Operation
Press the ENTER/ENT button to start playback; press
the ꢄꢅꢆꢇ direction buttons to select a title/chapter to
play or use 0-9 buttons to select directly.
ENTER/ENT
button
Press the PAUSE/
step frame by frame playback, and press the PLAY/
button to resume normal playback.
button to pause playback or start
PAUSE/
button
During playback, press the Stop/ꢈ button once to stop
playing, then press the PLAY/ button to resume normal
playback from the stopped point. Press the STOP/ꢈ
button twice repeatedly to stop playback completely.
Then press the PLAY/ button and the player will play
from the beginning.
STOP/ꢈ
button
Press the ZOOM button repeatedly to shift among 1X,
2X, 3X zooming effects and normal playback.
ZOOM button
A-B Button
Press the A-B button once to set the starting point A,
press it again to set the end point B. Then the player will
play the segment between A and B continuously. Press
this button a third time to stop the A-B repeat.
20
Playback Operation
DVD Playback (continued)
Press the TITLE button during playback. The title menu
will appear on the screen.
Press the ꢄꢅꢆꢇ direction buttons to select the
title/chapter to play, and press the ENTER/ENT button to
confirm your selection. Or press the 0-9 buttons to select
directly.
TITLE button
Press the MENU button during playback. The root menu
will appear on the screen.
Press the ꢄꢅꢆꢇ direction buttons to select the
title/chapter to play, and press the ENTER/ENT button to
confirm your selection. Or press the 0-9 buttons to select
directly.
MENU button
Press the ꢃ button to go to the previous chapter.
Press the ꢁ button to play the next chapter.
ꢃ&ꢁ buttons
Press the ꢀ button to start fast forward playback. Press it
repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X
and normal playback in sequence. Press the ꢂ button to
fast backward. Press it repeatedly to fast backward at the
speed of 2X, 4X, 8X, 16X and normal playback in
sequence.
ꢀ&ꢂ buttons
Press the PLAY/ button to resume normal playback.
21
Playback Operation
DVD Playback (continued)
Press the SLOW button repeatedly, and the slow
playback will be undergoing at the speed of 1/2, 1/4,
1/6, 1/8 and normal playback in sequence. Press the
PLAY/ button to resume normal playback during slow
playback.
SLOW button
Press the INFO button to display or conceal the detailed
information.
INFO button
DVD discs can contain up to 8 audio bit streams. For
example: English, French etc.
To select the audio bit stream you prefer, press the
AUDIO button during playback. The DVD player will play
the next audio bit stream if exists every time you press
the AUDIO button in succession.
AUDIO button
NOTE: This function is available for DVD discs recorded
multi-audio languages.
When a DVD disc is playing, press the SUBT button to
select a subtitle language or to turn the subtitle off. A DVD
disc can be recorded with up to 32 subtitles.
Press the SUBT button repeatedly, the mode of subtitles
will recycle as follows:
SUBTITLE 1/N: Subtitle 1 appears on the screen.
SUBTITLE 2/N: Subtitle 2 appears on the screen.
SUBTITLE */N: Subtitle * appears on the screen
SUBTITLE OFF: No subtitle.
SUBT button
“N” refers to the total number of subtitles that the current
disc contains.
NOTE: This function is available for DVD discs recorded
with multi-subtitles
22
Playback Operation
DVD Playback (continued)
Press the REP button to repeat a Chapter, Title or
cancel the repeat in sequence.
REP button
Press the ANGLE button to play the disc in multi-angle.
Multi-angle means that a scene is shot from different
angle so that audience can watch from any angle, like the
drawings below:
ANGLE button
If there are multiple angles in a scene, you can use the
ANGLE button to select the angle you like to enjoy. Press
the ANGLE button repeatedly to view from different
angle.
NOTE: This function is only available for the DVD disc
that coded with multi-angles.
Press the GOTO button to select desired disc title,
chapter or time.
Use the ꢆꢇ direction buttons to highlight Title, Chapter
or Time.
GOTO button
Use the 0-9 number buttons to input numbers of the
desired title, chapter or time and press the ENTER/ENT
button to confirm. Then the player will begin playing from
the selected title, chapter or time.
Press the button again to cancel the item.
23
Playback Operation
CD Playback
When a CD disc is loaded, the player will read the disc. Then a playback menu will
appear on the screen and the player will play the disc automatically by the default
sequence of the disc. You can use the ꢃ ꢁ buttons to select the desired track. Or press
the number buttons to input the number of the desired track first and then press the
ENTER/ENT button to confirm to play.
Buttons Operation
Press the PAUSE/
and press the PLAY/
playback.
button to pause during playback,
button to resume normal
PAUSE/
button
During playback, press the Stop/ꢈ button once to stop
playing and press the PLAY/ button to resume normal
playback from the stopped point. Press the STOP/ꢈ
button twice repeatedly to stop playback completely.
Then press the PLAY/ button and the player will play
from the beginning.
STOP/ꢈ
button
Press the ꢀ button to start fast forward playback. Press it
repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X
and normal playback in sequence. Press the ꢂ button to
fast backward. Press it repeatedly to fast backward at the
speed of 2X, 4X, 8X, 16X and normal playback in
sequence.
ꢀ&ꢂ buttons
Press the PLAY/ button to resume normal playback
during fast playback.
Press the ꢃ button to go to the previous chapter.
Press the ꢁ button to play the next chapter.
ꢃ&ꢁ buttons
24
Playback Operation
CD Playback (continued)
Press the REP button to repeat signal, folder or cancel
the repeat in sequence.
REP button
A-B Button
Press the A-B button once to set the starting point A,
press it again to set the end point B. Then the player will
play the segment between A and B continuously. Press
this button a third time to stop the A-B repeat.
Press the GOTO button to select desired track, track time
or disc time.
Use the ꢆꢇ direction buttons to highlight Track, Time or
Disc Time.
GOTO button
Use the 0-9 number buttons to input the desired numbers
of track or time. And press the ENTER/ENT button to
confirm. Then the player will begin playing from the
selected track or time.
Press it repeatedly to cancel the item.
Press the AUDIO button to select desired sound effect.
Press it repeatedly, the display will be as follows:
Left Right Mix Stereo
AUDIO button
25
Playback Operation
JPEG Playback
Pre-operation
1.
2.
Load a JPEG in the disc tray, the player will read the disc automatically.
The screen displays the root folder with several subdirectories/subfolders. Press
the ENTER/ENT button to enter. Use the ꢆꢇ buttons to select a desired folder
and press the ENTER/ENT button to confirm your selection.
3.
4.
The screen enters the selected subfolder with several pictures. Press the ꢆꢇ
buttons to select the desired picture and press the ENTER/ENT button to enter the
playback.
Press the ꢆꢇ buttons to highlight
, then press the ENTER/ENT button to
return to the last folder or directory.
NOTE: Many discs have other items besides pictures.
Filter and Repeat setup
Under the folder mode, press the direction buttons to highlight “Filter” and you can
change its settings according to the steps below:
1.
2.
3.
4.
Press the ENTER/ENT button to enter the setup menu.
Press the ꢆꢇ button to select the item you want to set.
Press the ENTER/ENT button to select or cancel.
Press the ꢄ button to exit.
Under the folder mode, press the direction buttons to highlight “Reapat” and press
ENTER/ENT button repeatedly to change its setting. You can also press the REP button
on the remote control to change its setting.
Button Operation
Press the Stop/ꢈ button to return to the folder during
STOP/ꢈ
playback. Press the PLAY/ button to return to normal
button
playback.
Press the PAUSE/
and then press the PLAY/ button to resume normal
playback.
button to pause during playback,
PAUSE/
button
26
Playback Operation
JPEG Playback (continued)
During playback, press the ꢃ button to go to the
previous picture; press the ꢁ button to go to the next
ꢃ&ꢁ buttons
picture.
Press the REP button to repeat single, folder or cancel
the repeat in sequence.
REP button
Picture Rotate
During browsing a picture, you can use the direction buttons to rotate the current
picture.
f
Press the ꢅ button to rotate the current picture 90° clockwise, as shown below:
Press the ꢇ button to rotate the current picture 180° clockwise, as shown below:
Press the ꢄ button to rotate the current picture 270° clockwise, as shown below:
27
System Setup
You can change the default settings of this unit to customize its performance to your own
preference. Read this section to learn how to set up the system.
Follow the steps below to set up your system:
1.
2.
Press the SETUP button and the setup menu will appear on the screen.
Press the ꢆ ꢇ buttons to select a sub-menu that you want to set up and press the
ꢅ button to enter the menu.
3. Press the ꢄ button to return to the previous menu. Or press the SETUP button
again at any time during the setting to exit from the setup menu.
Language setup
Press the SETUP button and press the ꢆ ꢇ
buttons to select Language. The screen will
display as shown left.
1. OSD language
This item is used to set the OSD (on-screen
display) language.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
There are several languages for you to choose.
Press the ꢆ ꢇ buttons to choose the proper
one. Press the ENTER/ENT button to confirm
your selection and return.
28
System Setup
Language setup (continued)
2. Subtitle
This item is used to set the subtitle language.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
There are several items for you to choose.
Press the ꢆ ꢇ buttons to choose the proper
one. Press the ENTER/ENT button to confirm
your selection and return.
3. Audio
This item is used to set the audio output
language.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
There are several languages for you to choose.
Press the ꢆ ꢇ buttons to choose the proper
one. Press the ENTER/ENT button to confirm
your selection and return.
4. DVD menu
This item is used to set the disc menu language.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
There are several languages for you to choose.
Press the ꢆ ꢇ buttons to choose the proper
one. Press the ENTER/ENT button to confirm
your selection and return.
29
System Setup
Video setup
Press the SETUP button and press the ꢆ ꢇ
buttons to select Video. The screen will display
as shown left.
1. Aspect Ratio
This item is used to set aspect ratio.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
Press the ꢆ ꢇ buttons to choose 4:3 or 16:9.
Press the ENTER/ENT button to confirm your
selection and return.
NOTE: Select 4:3 when a 4:3 TV is connected.
Select 16:9 when a 16:9 wide screen TV is
connected.
2. View Mode
This item is used to set the video mode of the
unit screen display.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
There are several items for you to choose.
Press the ꢆ ꢇ buttons to choose the proper
one. Press the ENTER/ENT button to confirm
your selection and return.
30
System Setup
Misc setup
Press the SETUP button and press the ꢆ ꢇ
buttons to select Misc. The screen will display as
shown left.
1. Use Default Settings
This item is used to reset the unit to the default.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
Use the ꢄꢅ buttons to choose Yes or No and
press the ENTER/ENT button to confirm
Choose Yes, all the setting of the unit will return
to the default status; choose No, it will return.
2. Screen saver
This item is used to set screen saver On or Off.
Press the ꢆ ꢇ buttons to highlight this item.
Press the ENTER/ENT or ꢅ button to enter the
setup of this item.
Press the ꢆ ꢇ buttons to choose On or Off.
Press the ENTER/ENT button to confirm your
selection and return.
31
Usage of straps
Follow the steps below to fix the DVD Player onto the of a car seat headrest.
1. Place the DVD player on a soft and smooth surface with the bottom facing up.
2. Loose the strap and remove the buckle from the strap.
3. Insert the strap through the holes as the Fig.1. Make sure the inside of the strap
faces up.
4. Thread the strap into the buckle as Fig.2 and Fig.3. After threading, make sure the
outside of the buckle faces up.
32
Usage of straps
5. Repeat these steps for the other strap.
6. Adjust the length of the strap according to the backrest of the seat.
7. Fasten the straps on the headrest of the seat as in Fig.4. Make sure the two straps
are between the headrest support rods (if your car has them).
NOTE: The drawings show the outside and the inside of the buckle and the strap.
33
Definitions
Letterbox screen
This refers to a screen on which the playback picture of wide-screen DVDs appears with black
bands running along the top and bottom.
Pan & Scan screen
This refers to a screen on which the playback picture of wide-screen DVDs is cut off at
the left and right sides.
Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or some small sections (chapters). Each
section is numbered: these numbers are called "Title number" or "Chapter number".
Title 1
Title 2
Chapter 1
Chapter1
Chapter2
……
……
Track (CD)
CDs are divided into some sections (tracks). Each section is numbered; these numbers are
called "Track number".
Track 1
Track 2
Track 3
……
JPEG
JPEG is a common picture format that has
small file size and low quality loss rate of
picture. Hundreds of pictures can be stored
in a disc in this format. In order to utilize real
digital album, use film to make a "PICTURE CD"
in JPEG format.
34
Troubleshooting
Take steps described in the tables below to solve simple problems before contacting
after-sales service.
If You Suspect Something Wrong, immediately turn the power off.
Disconnect the power connector and check that there is neither smoke nor heat from the unit
before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do
so.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Close the disc cover.
The disc cover may not be
closed.
There may not be any discs Put a disc in to the DVD drive.
in the DVD drive.
The disc may not be put in Put the disc in with the label
with the right way.
side up.
The player cannot
play.
The disc may be dirty or Clean or change the disc.
warped.
Make sure the player's
The player's region code
region code is the same as
may not as the same as the
the region code of DVD
region code of DVD disc.
disc.
There may be water on the Remove the disc and keep
lens.
the player being powered off
for at least two hours.
The system connection may
be not correct.
Connect
correctly.
the
system
The speaker may not be
turned on.
Turn on the speaker.
There is no sound
Setup the sound of the DVD
correctly.
The sound setup of the DVD
disc may be not correct.
The disc may be dirty or
warped.
Clean or change the disc.
35
Troubleshooting
PROBLEM
POSSIBLE SOLUTION
POSSIBLE CAUSE
The LCD may be off or not
be in correct video mode.
Turn on the LCD and choose
the correct video mode.
The system connection may
be not correct.
Connect
correctly.
the
system
There is no picture.
The unit may be not in AV
out mode.
Switch AV tab on the bottom
of the unit to out.
The disc may be dirty or
warped.
Clean or change the disc.
Poor AV performance.
There may be some
obstructions between the
remote control and the
player.
Remove the obstruction
between the remote control
and the player.
The remote control may not
be pointed at the player.
Point the remote control at
the player directly.
The remote control
does not work
Make sure the polarity of
each battery is correct.
The batteries of remote
control may not be inserted
correctly.
Replace the batteries.
The batteries of remote
control may be out of power
or weak.
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, unplug the power-supply cord and then plug it into the outlet again to
reset the player. If the problems still exist, cut off the power supply and consult your service
center or the qualified technician.
36
Specifications
TFT screen size
Laser Wavelength
7 inches
780/650 nm
NTSC
Video System
Frequency Response
Audio Signal-to-noise Rate
Audio distortion+noise
Channel Separation
Dynamic Range
20Hz～20kHz
±2.5dB
≥85dB
≤－70dB (1kHz)
≥70dB (1kHz)
≥80dB (1kHz)
Output Level: 1.5V±01..02 , Load: 10KΩ
Analog Audio
Audio Out
Video Out
Out
Output Level:1VP-P±0.2, Load: 75Ω
Video Out
Unbalanced Negative
Power
Power Consumption
Dimensions
DC 9.5V
< 25W
230mmX154mmX40mm (L*W*D)
About 0.85kg
Weight
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.
All rights reserved.
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham,
MA, USA.
37
|