Content
Operation Instructions...................................................................................................................................................1
Safety Precautions...........................................................................................................................................................2
First Setup...........................................................................................................................................................................3
Front View of the Product.............................................................................................................................................4
Rear View of the Product...............................................................................................................................................5
Quick Installation .............................................................................................................................................................6
Basic Operation.................................................................................................................................................................7
Advanced Operation—OSD Menu............................................................................................................................9
Supporting Timing Modes ........................................................................................................................................ 12
Technical Information ................................................................................................................................................. 13
Wall-mount instruction............................................................................................................................................... 14
Care and Maintenance................................................................................................................................................ 15
Troubleshooting............................................................................................................................................................ 15
Planar Support............................................................................................................................................................... 15
Operation Instructions
Thank you for purchasing this edge-lit LED LCD monitor, a high-resolution multi-scan color LED
LCD monitor.Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This
has been tested and found compliant with the limits for a Class B digital
LED LCD monitor
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This
LED LCD monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this
LED LCD monitor
does cause serious interference to radio or television reception, resetting the
LED LCD monitor
may determine it. Moreover, users are encouraged to correct interference by doing one or more
of the following:
Reorient or relocate the receiving antenna.
Move the
and the receiver further away from each other.
LED LCD monitor
Connect the
into an outlet on a circuit different from that to which the
LED LCD monitor
receiver is connected.
Consult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this
device.
would void the user‘s authority to operate this
LED LCD monitor
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this LED LCD monitor can't be handled as normal trash in Europe
when it is out of usage. Please refer to the recycle information from our website to handle it.
1
Safety Precautions
This
is manufactured and tested on a ground principle that a user’s safety
LED LCD monitor
comes first. However, improper use or installation may result danger to the LED LCD monitor as
well as to the user. Carefully go over the following WARNINGS before installation and keep this
guide handy.
WARNINGS:
This LED LCD monitor should be operated only at the correct power sources indicated on
the label on the rear end of the LED LCD monitor. If you’re unsure of the power supply in
your residence, consult your local dealer or power company.
Do not try to repair the LED LCD monitor yourself as it contains no user-serviceable parts.
The LED LCD monitor should only be repaired by a qualified technician.
Do not remove the LED LCD monitor cabinet. There is high-voltage parts inside that may
cause electric shock to human bodies, even when the power cord is disconnected .
Stop using the LED LCD monitor if the cabinet is damaged. Have it checked by a service
technician.
Put your LED LCD monitor only in a clean, dry environment. Unplug the LED LCD monitor
immediately if gets wet and consult your service technician.
Always unplug the LED LCD monitor before cleaning it. Clean the cabinet with a clean, dry
cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
Keep the LED LCD monitor away from magnetic objects, motors, TV sets, and transformer.
Do not place heavy objects on the cable or power cord.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall
be easily accessible.
Due to safety concerns, if the VESA mounting kit is purchased separately please make sure
the mounting kit is UL-Listed, and replaceable only by service personnel.
2
First Setup
Congratulations on your purchase of this high performance edge lit LED LCD monitor.
This LED LCD monitor comes with the following accessories :
LED LCD monitor
User’s Guide
Power Cable
VGA Cable
Installing the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Disconnecting the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Press the 2 tenons inwardly and pull the stand base to remove.
3
Front View of the Product
OSD Menu On/Off
Contrast/Brightness /Scroll Down/Adjust Decrease
Preset Mode/Scroll Up/ Adjust Increase
Confirm Select/ Auto adjust
Power ON/OFF
LED Indicator
4
Rear View of the Product
Power input (AC input)
VGA input (D-Sub 15 pin)
5
Quick Installation
1. Connect the VGA video cable from the monitor to the computer. Make sure both monitor
and computer are powered OFF.
2. Connect the power cord to a properly grounded AC outlet, then to the monitor.
3.
Power-ON computer and then POWER-ON the monitor.
Set the timing mode on your computer. Recommended resolution and refresh rate is
1366 x 768 @ 60 Hz.
Example:
PC
Power cable
VGA cable
6
Basic Operation
Before using the LED LCD monitor:
Connect external equipments properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LED LCD monitor on/off:
Press POWER button on the front of LED LCD monitor. The power LED indicator lights green
when the LED LCD monitor is on.
Using the OSD Menu
You are able to use OSD menus to adjust various settings by using menu button on the front of
the LED LCD monitor.
Display main menu
1
Exit from OSD menu
Auto adjust the image when not in OSD menu.
2
Confirm the selection
Select the desired item when in OSD menu
▼
When not in OSD menu, directly enters Contrast/Brightness Setting menu.
Select the desired item when in OSD menu
▲
When not in OSD menu, directly enters Preset Mode
▼ + ▲ Recall both of Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
LED LCD monitor
When
is in normal display, you can enable the“OSD Lock Out” function.
Option 1: OSD lock – all 4 buttons are locked except the“POWER”button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
LED LCD monitor
The
will show an“OSD Lock Out”message for 5~10 seconds and the message
will disappear automatically.
Repeat this step to unlock.
7
Option 2: OSD & Power button lock – all 5 buttons including the“POWER”button are locked.
Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons.
LED LCD monitor
The
will show an“Lock Out”message for 5~10 seconds and the message will
disappear automatically.
Repeat this step to unlock.
8
Advanced Operation—OSD Menu
LED LCD monitor
You can use the OSD menu to adjust various settings for your
.
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
Contrast: To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
Brightness: To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
ECO : Allows the user to turn the ECO On or Off. Contrast and Brightness adjustment
disabled when ECO is active.
Color Adjust: To select the color for improving brightness and color saturation
between 9300K, 6500K, 5400K,and User Color.
9300K: Adds blue to screen image for cooler white.
6500K: Adds red to screen image for warmer white and richer red.
9
5400K: Adds green to screen image for a darker color.
User Color: Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼ or ▲ button to adjust selected color.
Information: To display the information, regarding the current input signal coming
from the graphic card in your computer.
Note: See your graphic card user guide for more information about changing the
resolution and refresh rate.
Manual Image Adjust: To manually adjust the Horizontal Size, H. /V. position, Fine Tune,
Sharpness, Video Mode adjust and Preset Mode.
Horizontal Size: To adjust the width of the screen image.
▼: decrease the width of screen image, ▲: increase the width of screen image.
H./V. Position: To adjust the horizontal and vertical position of the video.
H. Position: ▲: move screen to the right, ▼: move screen to the left.
V. Position: ▲: move screen up, ▼: move screen down.
Fine Tune: To adjust the delay time of data and clock.
Press ▼ or ▲ to adjust to your preference.
Sharpness: To adjust the clarity of a non- WXGA(1366x768) signal with ▼ or ▲ button.
Video Mode adjust: To select the video mode from Full Screen or Aspect Ratio.
Full Screen: To select full-screen size image.
Aspect Ratio: To select input timing image size.
Preset Mode: Provides an optimum display environment depending on the contents
displayed. It contains 5 user-selectable presets.
Standard is for general windows environment and monitor default setting.
Game optimized for PC game environment.
Cinema optimized for movie and video environment.
Scenery optimized for displaying outdoor scenery images.
Text optimized for text editing and viewing in a word processing environment.
Setup Menu: To set up Language Select, OSD Position, OSD Time Out and OSD
Background.
Language Select: To allow users to choose from available languages.
OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD
Position adjustment.
10
H. Position: To horizontally adjust the OSD position.
▲: move OSD to the right, ▼: move OSD to the left.
V. Position: To vertically adjust the OSD position.
▲: move OSD up, ▼: move OSD down.
OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period
of time.
OSD Background: Allows the user to turn the OSD background On or Off.
Memory Recall: To recall factory settings for Video controls.
Press button 2 to select the Memory Recall menu option.
11
Supporting Timing Modes
STANDARD
VGA
RESOLUTION
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1024 X 768 @72Hz
1152 x 870 @ 75Hz
1152 X 864 @75Hz
1280 x 720 @ 60Hz
1280 x 768 @ 60Hz
1280 x 800 @ 60Hz
1366 x 768 @ 60Hz
VGA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
Note: Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.
Similar PC Timing on list below:
720 x 400 @ 70Hz / 640 x 400 @ 70Hz
640 x 480 @ 60Hz / 720 x 480 @ 60Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your monitor.
12
Technical Information
Technical Specification
Panel
18.5” TFT (with LED backlight)
On: 18 Watts (typical), 25 Watts (maximum)
Standby Mode: < 0.5 Watt
Off: < 0.5 Watt
Power Management
Displayable Resolution
Pixel Dimension
Display Color
WXGA 1366 x 768 max. Vertical Frequency 60Hz max.
0.3 x 0.3 mm
16.7M
Tilt
0°~ 20°
Active Display Area
Temperature
409.8 mm x 230.4 mm
Operating: 0°C ~ + 40°C
Storage: -20°C ~ + 60°C
Compliance
Power
FCC, CE, UL/cUL , WEEE，
Input Voltage AC100-240 V
13
Wall-mount instruction
Preparing To Install The Optional Wall Mount Arm (not included)
This LED LCD monitor can be attached to a wall mounting arm you can purchase separately.
Turn the power OFF then disconnect the cables from the LED LCD monitor before performing
the procedure below.
1. Lay the LED LCD monitor face down on a soft surface.
2. Remove the hinge cover.
3. Remove the one screw holding the stand to the hinge.
4. Remove the stand.
100mm x 100mm Screw
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
Mounting Options
1. Place the wall mounting arm onto the back of the LED LCD
monitor. Line up the holes of the arm with the holes in the
back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User’s Guide that came
with the optional wall mounting arm for instructions on
attaching it to the wall.
4mm, 0.7 pitch
threaded holes x 4
NOTE
100mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm
screw mounting kit not included.
14
Care and Maintenance
Care
Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your
LED LCD monitor away from the sun to reduce glare.
Put your LED LCD monitor in a well ventilated area.
Do not place any heavy things on top of your LED LCD monitor.
Make certain your LED LCD monitor is installed in a clean and moisture-free area.
Keep your LED LCD monitor away from magnets, motors, transformers, speakers, and TV sets.
Note
Move the LED out of the package and take off the plastic bag and Polystyrene Foam.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel within 0 degree leaning forward and 20 degree leaning backward.
Safety Tips
If smoke, abnormal noise or odor came out from your LED LCD monitor, caution you should
remove the power cord immediately and call your service center.
Never remove the rear cover of your LED LCD monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
LED LCD monitor
Never try to repair your yourself. Always call your service center or a
qualified technician to fix it.
Troubleshooting
No power
Make sure A/C power cord is securely connected to the power adapter and the power supply
LED LCD monitor
is firmly connected to the
.
Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
Make sure all signal cables are installed.
Power on but no screen image
LED LCD monitor
Make sure the video cable supplied with the is tightly secured to the video
output port on back of the computer. If not, tightly secure it.
Adjust brightness.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
LED LCD monitor
Connect the
to another computer.
Planar Support
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
15
|