Pioneer Car Video System DVH P4390UB User Manual

Owner’s Manual

DVD RECEIVER

DVH-P4390UB

English

Section

Before you start

Operating this unit

DVD video disc region numbers

To ensure safe driving

Head unit

CAUTION

Only DVD video discs with compatible region

numbers can be played on this player. You can

find the region number of the player on the

bottom of this unit and in this manual (refer to

Specifications on page 67).

Use an optional Pioneer USB cable (CD-U50E) to

connect the USB audio player/USB memory as

any device connected directly to the unit will pro-

trude out from the unit and may be dangerous.

Do not use unauthorized products.

1 2 3

4 5

WARNING

To avoid the risk of accident and the potential

violation of applicable laws, the front DVD or

TV (sold separately) feature should never be

used while the vehicle is being driven. Also,

rear displays should not be in a location

where they are visibly distracting to the driver.

In some countries or states the viewing of

images on a display inside a vehicle even by

persons other than the driver may be illegal.

Where such regulations apply, they must be

obeyed and this unit’s DVD features should

not be used.

Note

The function of

setting of the display connection (refer to V.OUT

(display connection) on page 30).

is different depending on the

About this manual

6 7 8

Function setting operations are completed

even if the menu is cancelled before the op-

erations are confirmed.

In this manual, iPod and iPhone will be re-

ferred to as “iPod”.

Head unit (front panel open)

NEVER install the display in a location that

enables the driver to watch images while driv-

ing.

Visit our website

Visit us at the following site:

http://pioneer.jp/group/index-e.html

When you park your car in a safe place and

apply the parking brake, the picture appears

on the screen.

We offer the latest information about

Pioneer Corporation on our website.

In case of trouble

Should this unit fail to operate properly, please

contact your dealer or nearest authorized

PIONEER Service Station.

Part

S (SRC/OFF)

(list)

a/b/c/d

(clock)

1 to 6

1/S.Rtrv/DVD

2/PAUSE

3/BOOKMARK

4/iPod/AUDIO

About this unit

MULTI-CONTROL

(M.C.)

CAUTION

/SUB

Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with liquids.

Always keep the volume low enough to hear

outside sounds.

TITLE

6/ /ANGLE

AUX input jack

(3.5 mm stereo

jack)

USB port

Open button

Disc loading slot

Avoid exposure to moisture.

If the battery is disconnected or discharged,

any preset memory will be erased.

B (BAND/ESC)

h (eject)

(Back/display/

scroll)

Section

Operating this unit

Remote control

Operating this unit

Button names

DVH mode

DVD mode

Switch the operation mode between DVD and DVH modes. Normally, set to DVH.

For details, refer to Using the remote control operation mode switch on the next

page.

2 3

Remote control operation

mode switch

DIRECT

Press to select tracks (chapters) directly.

Not used.

(Only in DVD source)

PLAY/PAUSE (f)

Press to pause or resume playback.

Press to switch sequentially be-

tween playback and pause.

(Only in DVD source)

Press to perform fast reverse.

REVERSE (m)

(Only in DVD source)

Press to perform fast forward.

FORWARD (n)

(Only in DVD source)

Press to return to the previous track (chapter).

10 PREVIOUS (o)

(Only in DVD source)

Press to go to the next track (chapter).

NEXT (p)

(Only in DVD source)

STEP (r/q)

Press to move ahead one frame at a time during DVD/Video CD/DivX playback.

Press and hold for one second to activate slow playback.

(Only in DVD source)

Press to stop playback.

STOP (g)

Not used.

Press to select to a desired title

When pressing DIRECT, press 0 to 10 to

number on a DVD.

input numbers. Press CLEAR to clear the

Press to select a menu item on a

11 0 to 10, CLEAR

input numbers. Press 1 to 6 to select the

video CD featuring PBC (playback

desired preset station for the tuner.

control).

Button names

VOLUME

DVH mode

DVD mode

Press to select among three FM bands

and one AM band and to cancel control

modes of functions.

Press to switch between media file

types. (Refer to Switching the media

file type on page 12.)

12 BAND/ESC

Press to increase or decrease volume.

Press to mute. Press again to unmute.

/MUTE

Press to turn the information display on or off when the video is displayed.

Depending on the selected source, pressing this button can switch the display in-

dication.

Press to cycle through all the available sources. Press and hold to turn the source

off.

13 DISP

SRC/OFF

AUDIO

(Only in DVD source)

Press to change the audio language/audio system during DVD/DivX playback.

14 A.MENU

15 FUNC

Press to select various sound quality controls.

Press to select functions.

(Only in DVD source)

Press to change the subtitle language during DVD/DivX playback.

SUBTITLE

ANGLE

Functions are the same as a/b/c/d on

the head unit.

Use to select a menu on the DVD

Move to operate fast forward, reverse and

menu.

(Only in DVD source)

Press to change the viewing angle during DVD playback.

Move the thumb pad

track search controls. Also used for con-

trolling functions.

(Only in DVD source)

Press to turn the DVD auto-playback function on or off.

AUTO PLAY

RETURN

Click to display the track title list, folder

list or file list depending on the source.

Click to select a menu on the DVD

menu.

Click the thumb pad

(Only in DVD source)

Press to display the PBC (playback control) menu during PBC playback.

Press to display the DVD menu during DVD playback.

Press to return to the top menu during DVD playback.

(Only in DVD source)

TOP MENU

Press to turn the bookmark function

on or off. For details, refer to Resume

BOOKMARK

Not used.

playback (Bookmark) on page 15.

Section

Operating this unit

Using the remote control

operation mode switch

There are two remote control operation modes

on the remote control. If you want to operate

this unit by remote control, select DVH mode.

In this case, both the head unit’s buttons and

remote control can control this unit.

Basic Operations of this unit

Indicator

Operation

Indicator

Operation

Appears when Dolby Pro Logic II

is used. (Activated only when

Important

Tuner: band and frequency

(Dolby Pro

Main dis-

play sec-

tion

Handle gently when removing or attaching

the front panel.

Avoid subjecting the front panel to excessive

shock.

Keep the front panel out of direct sunlight and

high temperatures.

To avoid damaging the device or vehicle inter-

ior, remove any cables and devices attached

to the front panel before detaching it.

Built-in DVD player ,USB sto-

rage device and iPod: elapsed

playback time and text infor-

mation

Logic II) in- DEQ-P7650 is connected to this

dicator

unit.)

Appears when DTS audio is se-

lected. (Activated only when DEQ-

P7650 is connected to this unit.)

(dts)

indicator

The disc (track) artist name is dis-

played.

Artist search refinement of the

iPod browsing function is in use.

(artist)

(disc)

Note

DVH mode operation

When operating this unit by remote control,

the mode is normally switched to DVH.

When you set the display connection (refer to

V.OUT (display connection) on page 30) to on, the

indicators of 2 to 7 do not appear.

The disc (album) name is dis-

played.

Album search refinement of the

iPod browsing function is in use.

Removing the front panel to protect your unit from

theft

DVD mode operation

If you switch the mode to DVD, the thumb pad

and 0 to 10 operations are changed for the

DVD player.

Press the open button to open the front panel.

Grip the left side of the front panel and pull it

gently outward.

Take care not to grip it too tightly or to drop the

front panel and protect it from contact with water

or other fluids to prevent permanent damage.

Always keep the detached front panel in a protec-

tion device such as a protection case.

The track (song) name is dis-

played.

A playable file is displayed during

viewing the file name list of disc

and a USB storage device.

Song search refinement of the

iPod browsing function is in use.

(song)

When you want to operate the follow-

ing functions, switch the mode to DVD:

An upper tier of the folder or

menu exists.

When operating the DVD menu by using

the thumb pad. (Refer to Operating the DVD

menu on page 13.)

Re-attaching the front panel

Reattach the front panel by holding it upright to

the unit and clipping it securely into the mount-

ing hooks.

The list function is being oper-

ated.

(list)

When operating the PBC menu by using 0

to 10. (Refer to PBC playback on page 13.)

When specifying title or track by using 0 to

10. (Refer to Specifying title on page 13 and

Specifying track on page 14.)

A lower tier of the folder or menu

exists.

This flashes when a song/album

related to the song currently play-

ing is selected from the iPod.

When operating the DVD setup menu by

using the thumb pad. (Refer to Setting up

the DVD player on page 25.)

LOC

Local seek tuning is on.

The loudness is on.

Turning the unit on

Press S (SRC/OFF) to turn the unit on.

LOUD

(loudness)

Turning the unit off

Receiving the stereo broadcast-

ing.

5 (stereo)

Press and hold S (SRC/OFF) until the unit turns

off.

Display indication

(repeat) Track or folder repeat is on.

Selecting a source

Random play is on.

Press S (SRC/OFF) repeatedly to switch between

the following sources:

(ran-

dom)

The iPod source is selected and

the shuffle or shuffle all function

is on.

TUNER (tuner)—DVD (built-in DVD player)—USB

(USB storage device)/USB-iPod (iPod connected

using USB input)—EXTERNAL (external unit 1)—

EXTERNAL (external unit 2)—AUX1 (AUX 1)—

AUX2 (AUX 2)—BLUETOOTH (Bluetooth tele-

phone/audio)

Appears when Dolby Digital audio

is selected. (Activated only when

DEQ-P7650 is connected to this

unit.)

(Dolby

Digital)

indicator

4 6 8

3 5 7

ab c d e

Adjusting the volume

Turn M.C. to adjust the volume.

Section

Operating this unit

Tuner

Notes

Batteries (battery pack or batteries installed)

must not be exposed to excessive heat such

as sunshine, fire or the like.

LOCAL (local seek tuning)

Listening to the radio while connecting a USB

storage device to this unit may generate

noise. In this case disconnect the USB sto-

rage device.

When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when

this unit’s source is turned on. To retract the

antenna, turn the source off.

Local seek tuning lets you tune in to only those radio

stations with sufficiently strong signals for good re-

ception.

Basic operations

Selecting a band

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

FM: OFF—LEVEL 1—LEVEL 2—LEVEL 3—LEVEL

CAUTION

Press B (BAND/ESC) until the desired band (F1,

F2, F3 for FM or AM) is displayed.

Use one CR2025 (3 V) lithium battery.

Remove the battery if the remote control is not

used for a month or longer.

There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the

same or equivalent type.

Do not handle the battery with metallic tools.

Do not store the battery with metallic objects.

If the battery leaks, wipe the remote control

completely clean and install a new battery.

When disposing of used batteries, comply

with governmental regulations or environmen-

tal public institutions’ rules that apply in your

country/area.

Manual tuning (step by step)

Press c or d.

AM: OFF—LEVEL 1—LEVEL 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow the

reception of weaker stations.

Seeking

Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c

or d.

While pressing and holding c or d, you can skip

stations. Seek tuning starts as soon as you re-

lease c or d.

Press M.C. to confirm the selection.

Use and care of the remote

control

Using the remote control

Point the remote control in the direction of the

front panel to operate.

Storing and recalling stations

for each band

When using for the first time, pull out the film

protruding from the tray.

Using preset tuning buttons

Replacing the battery

Slide the tray out on the back of the remote con-

trol.

Insert the battery with the plus (+) and minus (–)

poles aligned properly.

When you find a station that you want

Menu operations identical

for function settings/audio

adjustments/initial

to store in memory, press one of the preset

tuning buttons (1 to 6) and hold until the

preset number stops flashing.

settings/lists

Press one of the preset tuning buttons

(1 to 6) to select the desired station.

You can also recall stored radio stations by

Returning to the previous display

Returning to the previous list (the folder one level

higher)

pressing a or b during the frequency display.

Press

Important

Returning to the main menu

Function settings

Press and hold

Do not store the remote control in high tem-

peratures or direct sunlight.

The remote control may not function properly

in direct sunlight.

Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

Press M.C. to display the main menu.

Returning to the ordinary display

Canceling the initial setting menu

Turn M.C. to change the menu option

Press B (BAND/ESC).

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

WARNING

BSM (best stations memory)

Keep the battery out of the reach of children.

Should the battery be swallowed, consult a

doctor immediately.

BSM (best stations memory) automatically stores the

six strongest stations in the order of their signal

strength.

Press M.C. to turn BSM on.

To cancel, press M.C. again.

Section

Operating this unit

on the next page and PBC playback on the

next page.

If the remote control is set to DVH, g does not

operate.

Playing DivX VOD content

Built-in DVD player

Basic operations

Some DivX VOD (video on demand) content may only

be playable a fixed number of times. When you load a

disc containing this type of DivX VOD content, the

number of times you have played is shown on-screen

and you then have the option of playing the disc

(thereby using up one of the remaining plays), or

stopping. If you load a disc that contains expired DivX

VOD content (for example, content that has zero re-

maining plays), EXPIRED (THIS DivX RENTAL HAS

EXPIRED.) is displayed.

When loading a CD/CD-R/RW containing only

JPEG picture files, this unit automatically

starts a slideshow from the first folder/picture

on the disc. The player displays the pictures in

each folder in alphabetical order.

If the bookmark function is on, DVD playback

resumes from the selected point. For more de-

tails, refer to Resume playback (Bookmark) on

page 15.

When you are watching a DVD and attempt to

perform an operation, it may not be performed

due to the programming on the disc. When

this happens, the unit indicates the button

on the screen.

Operating the DVD menu

Open the front panel

Press the open button.

Disc loading slot appears.

Some DVDs allow you to make a selection from the

disc contents using a menu.

Playing a disc

Insert the disc into the disc loading slot with the

label side up.

This function is available for DVD video.

You can display the menu by pressing the MENU

or TOP MENU while a disc is playing. Pressing

MENU again lets you start playback from the lo-

cation selected from the menu. For details, refer

to the instructions provided with the disc.

Ways to display the menu will differ depending on

the disc.

Ejecting a disc

Press h.

If there is no limit to the number of times the DivX

VOD content can be viewed, then you may load

the disc into your player and play the content as

often as you like, and no message will be dis-

played.

If the message is displayed after loading a disc

containing DivX VOD content, press f.

Playback of the DivX VOD content will start.

To skip to the next file, press p.

Selecting a folder

Press a or b.

You cannot select a folder that does not have a

compressed audio file, JPEG file or DivX file re-

corded in it.

Press a/b/c/d to select the desired menu op-

tion.

Press M.C.

Playback starts from the selected menu item.

Selecting a chapter/track/file

Press c or d.

Basic playback controls

The table below shows the basic controls for

playing discs. The following chapters cover

other playback features in more details.

To return to the previous file, press o.

If you do not want to play the DivX VOD content,

press g.

You can also skip back or forward to another

chapter/track/file by pressing o or p.

During PBC playback, a menu may be displayed

if you perform these operations.

PBC playback

Important

With Video CDs featuring PBC (playback control)

function, you can operate a menu.

Fast forwarding or reversing

In order to play DivX VOD content on this unit,

you first need to register the unit with your

DivX VOD content provider. About your regis-

tration code, refer to page 28.

DivX VOD content is protected by a DRM (Di-

gital Rights Management) system. This re-

stricts playback of content to specific,

registered devices.

Button What it does

This function is available for Video CD.

Press and hold c or d.

Starts playback, pauses a disc that’s play-

When PBC menu is displayed, press 0 to 10 cor-

responding to a menu number to start playback.

When the menu is two or more pages long, press

o or p to switch between displays.

When DVD, DivX or Video CD is playing, if you

press and hold c or d for five seconds, the icon

m or n is highlighted. When this happens,

fast reverse/fast forward continues even if you re-

lease c or d. To resume playback at a desired

point, press f.

ing or restarts a paused disc.

Starts the slideshow, pauses the slideshow

or restarts a paused slideshow.

Stops playback.

Stopping playback at the point set in Re-

sume playback.

Press one more time to stop playback com-

pletely.

Notes

You can display the menu by pressing

Returning to root folder

Press and hold B (BAND/ESC).

RETURN during PBC playback. For details,

refer to the instructions provided with the

disc.

PBC playback of a Video CD cannot be can-

celed.

During playback of Video CDs featuring PBC

(Playback Control), the following operations

are not available:

— Search and time search functions

— Selection of a range for repeat play

Switching the media file type

Specifying title

Press and hold to perform fast reverse.

Press and hold to perform fast forward.

Press B (BAND/ESC) to switch between media file

types.

This function is available for DVD video.

To perform this function, set the remote control to

DVD mode.

Press 0 to 10 corresponding to a desired title

number when the disc is stopped.

In case of DVD-R/RW/ROM, this unit does not

allow playback of audio data (CD-DA) and JPEG

file.

Skips to the start of the current track, chap-

ter or file, then to previous tracks/chapters/

files.

Displays the previous picture.

Notes

Title number is displayed for eight seconds and play-

back starts from the selected title.

Skips to the next track, chapter or file.

Displays the next picture.

When the automatic playback function is on,

this unit will cancel the DVD menu and auto-

matically start playback from the first chapter

of the first title. Refer to Automatic playback of

DVDs on page 14.

To select 3, press 3.

To select 10, press 10 and 0 in that order.

To select 23, press 10, 10 and 3 in that order.

Notes

You may find with some DVD or Video CD

discs that some playback controls do not work

in certain parts of the disc. This is not a mal-

function.

If you are playing a DVD or Video CD, a menu

may appear. Refer to Operating the DVD menu

Section

Operating this unit

Specifying track

Operating this unit

Slow motion playback

Displaying text information

Advanced operations using

special buttons

You can use the search function to specify a track to

search for a desired track.

This lets you slow down playback speed.

Selecting the desired text information

This function is available for DVD video, DivX and

Video CD.

This function is available for CDs and com-

pressed audio files.

Operating the DVD menu

This function is available for Video CD.

This function cannot be operated during Video

CD playback featuring PBC (playback control).

To perform this function, set the remote control to

DVD mode.

Press r and hold during playback.

The icon is displayed, forward slow motion

playback begins.

Press

Some DVDs allow you to make a selection from the

disc contents using a menu.

Scrolling the text information to the left

This function is available for DVD video.

You can display the menu by pressing the 1/S.

Rtrv/DVD MENU while a disc is playing. Pressing

1/S.Rtrv/DVD MENU again lets you start play-

back from the location selected from the menu.

For details, refer to the instructions provided with

the disc.

This function is available for CDs and com-

pressed audio files.

Press q or r to adjust playback speed during

slow motion playback.

For the numbers to press, please refer to Specifying

title on the previous page.

Press and hold

Each time you press q or r it changes the

speed in four steps in the following order:

1/16—1/8—1/4—1/2

To return to normal playback, press f.

You cannot operate this step during DivX play-

back.

Notes

Text information items that can be changed

depend on the media.

Depending on the version of iTunes used to

write MP3 files to a disc or media file types, in-

compatible text stored within an audio file

may be displayed incorrectly.

When ever scroll is set to on at the initial set-

ting, text information scrolls continuously in

the display. Refer to SCROLL (ever scroll) on

page 30.

Searching for the part you

want to play

Press a/b/c/d to select the desired menu op-

tion.

Press M.C.

Notes

You can use the search function to find the part you

want to play.

Playback starts from the selected menu item.

There is no sound during slow motion play-

back.

Images during slow motion playback may be

unclear for some discs.

Reverse slow motion playback is not available.

Note

Chapter search and track search are not possible

when disc playback has been stopped.

This function cannot be operated during Video

CD playback featuring PBC (playback control).

To perform this function, set the remote control to

DVH mode.

You can also perform this operation by pressing

MENU or TOP MENU on the remote control.

Resume playback (Bookmark)

Press DIRECT.

Press 0 to 9 to input the desired number.

To cancel the inputted numbers, press CLEAR.

Press DIRECT.

Return to the specified scene

By using the Bookmark function, you can resume

playback from a selected scene the next time the disc

is loaded.

Selecting and playing files/tracks

from the file name/track title list

You can return to the specified scene where the DVD

you are currently playing has been preprogrammed

to return.

This starts playback from the selected part.

This function is available for DVD video.

During playback, press 3/BOOKMARK at the

point you want to resume playback next time.

The selected scene will be bookmarked so that

playback resumes from that point next time. You

can bookmark up to five discs. After that, the old-

est bookmark is replaced by the new one.

To clear the bookmark on a disc, press and hold

3/BOOKMARK during playback.

Press

mode.

to switch to the file name/track title list

Note

This function is available for DVD video.

Press RETURN to return to the specified scene.

This function cannot be used if a specified scene

has not been preprogrammed on the DVD disc.

With discs featuring a menu, you can also press

MENU or TOP MENU and then make selections

from the displayed menu.

Use M.C. to select the desired file name (or folder

name).

Changing title, file or folder name

Turn M.C.

Playing

Frame-by-frame playback

Automatic playback of DVDs

When a file or track is selected, press M.C.

Notes

This lets you move ahead one frame at a time during

playback.

When a DVD disc with a DVD menu is inserted, this

unit will cancel the menu automatically and start

playback from the first chapter of the first title.

Viewing a list of the files (or folders) in the selected

folder

You can also perform this operation by press-

ing BOOKMARK on the remote control.

To perform this function, set the remote con-

trol to DVD mode.

This function is available for DVD video, DivX and

Video CD.

When a folder is selected, press M.C.

This function is available for DVD video.

Some DVDs may not operate properly. If this func-

tion is not fully operated, turn this function off

and start playback.

Playing a song in the selected folder

Press r during playback.

When a folder is selected, press and hold M.C.

Each time you press r, you move ahead one

frame.

To return to normal playback, press f.

Images during frame-by-frame playback may be

unclear for some discs.

You can also bookmark a disc by pressing and

holding h (eject) at the point you want to

bookmark. Next time you load the disc, play-

back will resume from the bookmarked point.

Note that you can only bookmark one disc

using this method. To clear the bookmark on a

disc, press h (eject).

Notes

Press AUTO PLAY to turn automatic playback on.

A PLAY:ON is displayed.

This function is available for JPEG files, CD

To turn automatic playback off, press AUTO PLAY

again.

TEXT, compressed audio files and DivX.

When the separately sold display is connected

to this unit, the listed information will appear

on it.

Section

Operating this unit

Notes

Changing audio language during

playback (Multi-audio)

Changing the subtitle language

during playback (Multi-subtitle)

Function settings

You can also perform this operation by press-

ing ANGLE on the remote control.

Press M.C. to display the main menu.

With DVDs that provides audio playback in different

languages and different audio systems (Dolby Digital,

DTS, etc.), you can switch between languages/audio

systems during playback.

With DVDs featuring multi-subtitle recordings, you

can switch between subtitle languages during play-

back.

Performing this operation during fast forward/

fast reverse, pause or slow motion playback

returns you to normal playback, but the view-

ing angle does not change.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

This function is available for DVD video and DivX.

Press 5/ /SUB TITLE during playback.

This function is available for DVD video, DivX and

Video CD.

After selecting, perform the following proce-

dures to set the function.

The subtitle selection icon

eight seconds.

is displayed for

Press 4/iPod/AUDIO during playback.

The audio selection icon is displayed for eight

seconds.

Selecting a repeat play range

Press 5/

/SUB TITLE while the subtitle selec-

REPEAT (repeat play)

tion icon is displayed.

Press 4/iPod/AUDIO while the audio selection

icon is displayed.

The subtitle language changes each time you

This function is available for JPEG files, CDs and

compressed audio files.

During PBC (Playback Control) playback, you can-

not select REPEAT.

press 5/

/SUB TITLE.

The audio changes each time you press 4/iPod/

AUDIO.

Press 6/ /ANGLE to select the repeat range.

Notes

Press M.C. to display the setting mode.

Turn M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on

this page.

TITLE – Repeat the current title

CHAPTER – Repeat the current chapter

TRACK – Repeat the current track/file

FOLDER – Repeat the current folder

DISC – Play through the current disc

During playback of Video CDs featuring PBC

(Playback Control), this function cannot be

operated.

You can also perform this operation by press-

ing SUBTITLE on the remote control.

With some DVDs and DivX, switching between

subtitle languages may only be possible using

a menu display.

Notes

You can also perform this operation by press-

ing AUDIO on the remote control.

Press M.C. to confirm the selection.

With some DVDs and DivX, switching between

languages/audio systems may only be possi-

ble using a menu display.

You can also switch between languages/audio

systems using DVD setup menu. For details,

refer to Setting the audio language on page 25.

Only digital output of DTS audio is possible. If

the unit’s optical digital outputs are not con-

nected, select an audio setting other than

DTS.

Display indications such as Dolby D and Mch

indicate the audio system recorded on the

DVD and DivX. Depending on the setting, play-

back may not be with the same audio system

as that indicated.

Performing this operation during fast forward/

fast reverse, pause or slow motion playback

returns you to normal playback.

RANDOM (random play)

You can also switch between subtitle lan-

guages using DVD setup menu. For details,

refer to Setting the subtitle language on page

25.

Performing this operation during fast forward/

fast reverse, pause or slow motion playback

returns you to normal playback.

This function is available for JPEG files, CDs and

compressed audio files.

Press M.C. to turn random play on or off.

Playing tracks in random order

LR SELECT (audio output)

Tracks in a selected repeat range are played in ran-

dom order.

When playing DVD video discs recorded with LPCM

audio, you can switch the audio output.

When playing Video CD discs, you can switch be-

tween stereo and monaural audio output.

This function is available for JPEG files, CDs and

compressed audio files.

Press 5/

/SUB TITLE to turn random play on or

This function is available for DVD video and Video

CD.

This function is not available when disc playback

is stopped.

You may not be able to select or use this function

depending on the disc and the playback location.

If you select Linear PCM, you can operate this

function when playing a disc recorded on a dual

mono mode. (Refer to Setting for digital output on

page 28.)

Changing the viewing angle during

playback (Multi-angle)

off.

With DVDs featuring multi-angle (scenes shot from

multiple angles) recordings, you can switch among

viewing angles during playback.

Pausing playback

This function is available for DVD video.

During playback of a scene shot from multiple an-

gles, the angle icon

Press 2/PAUSE to pause or resume.

is displayed. Turn angle

icon display on or off using the DVD setup menu.

For details, refer to Setting the angle icon display

on page 26.

Enhancing compressed audio and

restoring rich sound (advanced

sound retriever)

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

L+R – left and right

L – left

R – right

Press 6/ /ANGLE during playback of a scene

shot from multiple angles.

The angle icon

and angle number are dis-

This function is available for CDs and com-

pressed audio files.

Press 1/S.Rtrv/DVD MENU to cycle between:

OFF (off)—1—2

1 is effective for low compression rates, and 2 is

effective for high compression rates.

MIX – mixing left and right

played for eight seconds.

Press M.C. to confirm the selection.

Press 6/ /ANGLE while the angle icon and

angle number are displayed.

The angle changes each time you press 6/

/ANGLE.

ROTATION (picture rotation)

Section

Operating this unit

USB portable audio player/

USB memory

You can play compressed audio files, DivX and

JPEG image files stored in a USB storage de-

vice.

This function is available for JPEG files.

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

Press

to switch the information display.

DVD video: Information display 1—Information

display 2—Normal playback display

Video CDs: Information display—Normal play-

back display

JPEG files and DivX: Information display—

Folder name display—File name display—Normal

playback display

CD TEXT discs and compressed audio files:

Information display—Title display

Title display shows the text information of the cur-

rently playing disc.

CD TEXT discs: Disc Title (disc title), Disc Ar-

tist (disc artist name), Track Title (track title),

Track Artist (track artist name)

Compressed audio files: Folder Name (folder

name), File Name (file name), Track Title (track

title), Artist Name (artist name), Album Title

(album title), Comment (comment), Bit Rate (bit

rate)

0 – Cancel the rotation

90 – Rotate 90 degrees

180 – Rotate 180 degrees

–90 – Rotate –90 degrees

For details about compatibility, refer to

Compressed audio and DivX compatibility

(disc, USB) on page 62.

Press M.C. to confirm the selection.

PAUSE (pause)

Press M.C. to pause or resume.

In the following instructions, USB mem-

ories and USB audio players are collectively

referred to as “USB storage device”.

Title display

S.RTRV (advanced sound retriever)

1 Disc icon

Automatically enhances compressed audio and re-

stores rich sound.

When playing a disc containing various

data format, MIXED appear on it.

Basic operations

This function is available for CDs and compressed

audio files.

2 Media indicator

3 Title/Folder number indicator

DVD: shows the title currently playing.

Compressed audio, JPEG files and DivX:

shows the folder currently playing.

4 Chapter/track/file number indicator

DVD: shows the chapter currently playing.

Video CD and CD: shows the track currently

playing.

Playing files on a USB storage device

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

Refer to Enhancing compressed audio and restor-

ing rich sound (advanced sound retriever) on the

previous page.

Open the USB port cover and plug in the USB

storage device using a USB cable.

Stopping playback of files on a USB storage device

Notes

You may disconnect the USB storage device at

any time.

Press M.C. to confirm the selection.

Text information on the Title display does not

scroll.

Selecting a folder

Press a or b.

When a Video CD featuring the PBC (playback

control) function starts playing, PLAYBACK

CONTROL ON will be displayed instead of

track number indicator and play time in-

dicator.

Switching the information display

Compressed audio, JPEG files and DivX:

shows the file currently playing.

5 Play time indicator

Fast forwarding or reversing

Press and hold c or d.

When the video output is set to on in the initial

setting menu (refer to V.OUT (display connec-

tion) on page 30) and a separately sold display

is connected to this unit, the text information

appears on the display.

Selecting a file

Press c or d.

JPEG files: not available.

6 Variable message area

Returning to root folder

Press and hold B (BAND/ESC).

DVD video: shows the audio language, subti-

tle language, viewing angle, repeat range and

speaker output channel.

Switching the media file type

Press B (BAND/ESC) to switch between media file

types.

Video CD: shows the repeat range and audio

output channel.

JPEG files: not available.

DivX: shows the audio system, subtitle setting

and repeat range.

Pause or resume playback

Press f.

CD, compressed audio: shows the repeat

range and random setting.

Selecting a file directly in the

current folder

Information display

The operation is the same as that of the built-in DVD

player.

Refer to Searching for the part you want to play on

page 14.

Section

Operating this unit

iPod

Incompatible text saved on the iPod will not

be displayed by the unit.

Displaying text information

Function settings

Press M.C. to display the main menu.

Basic operations

The operation is the same as that of the compressed

audio on the built-in DVD player.

Refer to Displaying text information on page 15.

Press

to switch to the top menu of

Turn M.C. to select the function.

Playing songs on an iPod

list search.

After selecting, perform the following proce-

dures to set the function.

Open the USB port cover.

Plug an iPod into the USB port/USB port and

AUX input.

Use M.C. to select a category/song.

Selecting files from the file

name list

REPEAT (repeat play)

When playing songs on an iPod, plug an iPod

into the USB port using the iPod Dock Con-

nector to USB Cable.

Changing the name of the song or category

Turn M.C.

Refer to REPEAT (repeat play) on page 17.

However, the repeat play ranges you can select are

different from that of the built-in DVD player. The re-

peat play ranges of the USB portable audio player/

USB memory are:

When browsing for a song

Playlists—artists—albums—songs—podcasts—

genres—composers—audiobooks

When browsing for a video

Depending on your iPod, categories shown on the

display differ.

The operation is the same as that of the built-in DVD

player.

Refer to Selecting and playing files/tracks from the file

name/track title list on page 15.

When playing videos on an iPod with video

capabilities, plug an iPod into the USB port

and AUX input using an interface cable (e.g.,

CD-IU50V).

TRACK – Repeat just the current file

FOLDER – Repeat the current folder

ALL – Repeat all files

For details on the position of the USB port and

AUX input, refer to Head unit on page 5.

Press S (SRC/OFF) to select USB-iPod as a

source.

Playing

Advanced operations using

special buttons

RANDOM (random play)

When a song or video is selected, press M.C.

Playback will start.

Refer to RANDOM (random play) on page 17.

ROTATION (picture rotation)

Viewing a list of songs/videos in the selected cate-

gory

Selecting a track (chapter)

Press c or d.

Changing audio language during playback (Multi-

audio)

Refer to Changing audio language during playback

(Multi-audio) on page 16.

When a category is selected, press M.C.

This function is available for JPEG files.

Playing a song in the selected category

Fast forwarding or reversing

Press and hold c or d.

Refer to ROTATION (picture rotation) on page 17.

When a category is selected, press and hold M.C.

You cannot perform this operation by pressing

the button of the same name on the remote con-

trol.

PAUSE (pause)

Searching the list by alphabet

Notes

When a list for the selected category is displayed,

press

to switch to alphabet search mode.

Turn M.C. to select a letter.

Press M.C. to display the alphabetical list.

If alphabet search fails, NOT FOUND is dis-

played.

Refer to PAUSE (pause) on page 18.

S.RTRV (advanced sound retriever)

The iPod cannot be turned on or off when the

Changing the subtitle language during playback

(Multi-subtitle)

Refer to Changing the subtitle language during play-

back (Multi-subtitle) on page 16.

control mode is set to CTRL AUDIO.

Disconnect headphones from the iPod before

connecting it to this unit.

The iPod will turn off about two minutes after

the ignition switch is set to OFF.

Read the precautions for iPod in the following

section. Refer to page 61.

If an error message is displayed, refer to Error

messages on page 57.

This function is available for compressed audio

files.

Refer to S.RTRV (advanced sound retriever) on page

18.

You cannot perform this operation by pressing

the button of the same name on the remote con-

trol.

Displaying text information

Selecting a repeat play range

When the video output is set to off in the initial

setting menu (refer to Switching the informa-

tion display on page 18), the text information

of the currently playing song will appear on

this unit. You can switch the text information.

Refer to Selecting a repeat play range on page 17.

However, the repeat play ranges you can select are

different from that of the built-in DVD player. The re-

peat play ranges of the USB portable audio player/

USB memory are:

Switching the information display

The operation is the same as that of the built-

in DVD player.

Refer to Switching the information display on

page 18.

Browsing for a song/video

TRACK – Repeat the current file

FOLDER – Repeat the current folder

ALL – Repeat all files

When the video output is set to on in the in-

itial setting menu and an separately sold

display is connected to this unit, the text in-

formation appears on the display (refer to

V.OUT (display connection) on page 30).

The elapsed playing time is displayed on

this unit and you cannot switch the text in-

formation.

Operations to control an iPod with this unit is

designed to be as close to the iPod as possible

to make operation and song/video search

easy.

Playing tracks in random order

Refer to Playing tracks in random order on page 17.

When the separately sold display is con-

nected to this unit and the video output is

set to on in the initial setting menu (refer to

V.OUT (display connection) on page 30), the

listed information of videos will appear on

the display.

Pausing playback

Refer to Pausing playback on page 17.

Enhancing compressed audio and restoring rich

sound (advanced sound retriever)

Refer to Enhancing compressed audio and restoring

rich sound (advanced sound retriever) on page 17.

Section

Operating this unit

S.RTRV (advanced sound retriever)

Selecting the desired text information

Operating this unit’s iPod function from your iPod

This function is not compatible with the following

iPod models.

Press M.C. to display the setting mode.

Turn M.C. to select your favorite setting.

Press

Automatically enhances compressed audio and re-

stores rich sound.

SONGS – Play back songs in the selected list

in random order.

ALBUMS – Play back songs from a randomly

selected album in order.

Scrolling the text information to the left

iPod nano 1st generation

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

For details, refer to Enhancing compressed audio

and restoring rich sound (advanced sound retriever)

on the previous page.

Press and hold

iPod 5th generation

Press 4/iPod/AUDIO to switch the control mode.

CTRL IPOD – This unit’s iPod function can be

operated from the connected iPod.

CTRL AUDIO – This unit’s iPod function can

be operated from this unit.

OFF – Cancel random play.

Advanced operations using

special buttons

Press M.C. to confirm the selection.

SHUFFLEALL (shuffle all)

When you select CTRL IPOD, operate the con-

Selecting a repeat play range

nected iPod to select a song/video and play.

This function is available only for songs.

Press M.C. to turn shuffle all on.

To turn off, set SHUFFLE in the FUNCTION menu

to off.

Press 6/ /ANGLE to cycle between the follow-

Switching the control mode to CTRL IPOD

pauses song/video playback. Operate the iPod

to start playback.

Information display

ing:

When the video output is set to on in the initial

setting menu (refer to V.OUT (display connec-

tion) on page 30) and a separately sold display

is connected to this unit, the text information

appears on the display.

ONE – Repeat the current song

ALL – Repeat all songs in the selected list

The following functions are still accessible

from the unit even if the control mode is set

to CTRL IPOD.

LINK PLAY (link play)

Playing songs in a random order (shuffle)

Press 5/

/SUB TITLE to turn shuffle all on.

This function is available only for songs.

Press M.C. to display the setting mode.

Turn M.C. to change the mode; press to select.

For details about the settings, refer to Playing

songs related to the currently playing song on the

previous page.

Fast forward/reverse

Track up/down

Switching the text information

To turn off, set SHUFFLE in the FUNCTION menu

to off.

This function is available only for songs.

Pausing playback

Press 2/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich

sound (advanced sound retriever)

Playing songs related to the currently playing song

You can play songs from the following lists.

• Album list of the currently playing artist

• Song list of the currently playing album

• Album list of the currently playing genre

Press 1/S.Rtrv/DVD MENU to cycle between:

OFF (off)—1—2

1 is effective for low compression rates, and 2 is

effective for high compression rates.

CTRL (control mode)

Press M.C. to select your favorite setting.

For details, refer to Operating this unit’s iPod func-

tion from your iPod on the previous page.

Press and hold

to switch to link play mode.

Turn M.C. to change the mode; press to select.

PAUSE (pause)

Function settings

ARTIST – Plays an album of the artist cur-

rently being played.

ALBUM – Plays a song from the album cur-

rently being played.

GENRE – Plays an album from the genre cur-

rently being played.

Information display

Press M.C. to pause or resume.

Press M.C. to display the main menu.

AUDIO BOOK (changing of audiobook speed)

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

This function is available only for songs.

Press M.C. to display the setting mode.

Turn M.C. to select your favorite setting.

SEARCHING flashes while searching the list and

then the playback of the list starts.

FASTER – Playback at a speed faster than nor-

After selecting, perform the following proce-

dures to set the function.

mal

NORMAL – Playback at normal speed

SLOWER – Playback at a speed slower than

normal

REPEAT (repeat play)

Press M.C. to confirm the selection.

Title display

Press M.C. to display the setting mode.

Turn M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on

this page.

WIDE (changing the screen mode)

1 Source icon

2 Power indicator

This function is available only for video.

Press M.C. to switch the screen mode.

Appears when the power is supplied to the

iPod.

Press M.C. to confirm the selection.

WIDE :ON – Wide screen (16:9)

WIDE :OFF – Standard screen (4:3)

SHUFFLE (shuffle)

3 Song number indicator

4 Repeat indicator

5 Play time indicator

6 Shuffle indicator

Section

Operating this unit

play.

Press

to switch the information dis-

Setting the subtitle language

Setting up the DVD player

Introduction of DVD setup

adjustments

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

When selecting FM as the source, you cannot switch

to SLA.

You can set a desired subtitle language. When avail-

able, the subtitles will be displayed in the selected

language.

Information display—Title display

PHOTO is displayed.

If an album art data is not included in a song,

Move the thumb pad up or down to select SUBTI-

TLE LANG. in LANG.

Click the thumb pad.

A subtitle language menu is displayed.

Move the thumb pad up, down, left or right to se-

lect the desired language.

You can use this menu to change audio, subtitle, par-

ental lock and other DVD settings.

Settings are based on the FM volume level, which

remains unchanged.

The AM volume level can also be adjusted with

this function.

Video CD, CD, compressed audio and DivX are

automatically set to the same source level adjust-

ment volume.

To perform this function, set the remote control to

DVD mode.

Audio Adjustments

Select DVD as the source and then press g.

Press MENU when the disc is stopped.

The DVD setup menu is displayed.

Press M.C. to display the main menu.

Click the thumb pad.

The subtitle language is set.

Turn M.C. to change the menu option

Move the thumb pad left or right to switch the

DVD setup menu categories.

and press to select AUDIO.

Turn M.C. to select the audio function.

Bluetooth, external unit 1 and external unit 2 are

automatically set to the same source level adjust-

ment volume.

iPod and USB storage device are automatically

set to the same source level adjustment volume.

Press M.C. to display the setting mode.

Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

Notes

LANG. (language)—PICT. (picture)—GEN. (gener-

al)

If the selected language is not available, the

language specified on the disc is displayed.

You can also switch the subtitle language by

pressing SUBTITLE during playback. (Refer to

Changing the subtitle language during play-

back (Multi-subtitle) on page 16.)

After selecting, perform the following proce-

dures to set the audio function.

Move the thumb pad up or down to select the

DVD setup function names.

For LANG.: SUBTITLE LANG. (subtitle language

settings)—AUDIO LANG. (audio language set-

tings)—MENU LANG. (menu language settings)

—OSD LANGUAGE (on screen display language

setting)—CHARACTER SET (character set set-

ting)

For PICT.: ANGLE ICON DISPLAY (angle icon)—

TV ASPECT (TV aspect)—SLIDESHOW TIME (sli-

deshow interval time setting)

For GEN.: PARENTAL (parental lock)—DivX SUB-

TITLE (DivX subtitle)—IEC DIGITAL OUTPUT (di-

gital output setting)—DivX VOD (DivX VOD)—

SAMPLING OUTPUT (down sampling output set-

ting)

If you press MENU during display of a DVD setup

menu, the DVD setup menu is canceled and the

unit returns to the previous display.

FAD/BAL (fader/balance adjustment)

Press M.C. to display the setting mode.

Press M.C. to cycle between fader (front/rear) and

balance (left/right).

Press M.C. to confirm the selection.

The setting made here will not be affected

even if the subtitle language is switched dur-

ing playback using SUBTITLE.

Turn M.C. to adjust speaker balance.

EQUALIZER (equalizer recall)

When you select OTHERS

Press M.C. to display the setting mode.

Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM—

FLAT—POWERFUL

A language code input display is shown when

OTHERS is selected. Refer to Language code chart for

DVD on page 66.

Press M.C. to confirm the selection.

Pressing CLEAR cancels the input numbers.

TONE CTRL (equalizer adjustment)

Adjusted equalizer curve settings are stored in

CUSTOM.

Setting the audio language

Press M.C. to display the setting mode.

Press M.C. to select BASS (bass)/MID (mid)/TRE-

BLE (treble).

Turn M.C. to adjust the level.

Adjustment range: +6 to –6

Menu operations identical for

DVD setup adjustments

Move the thumb pad up or down to select AUDIO

LANG. in LANG.

Click the thumb pad.

An audio language menu is displayed.

Move the thumb pad up, down, left or right to se-

lect the desired audio language.

Click the thumb pad.

Returning to the previous display

Press RETURN.

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

The audio language is set.

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

OFF (off)—LOW(low)—HIGH (high)

Press M.C. to confirm the selection.

Notes

If the selected language is not available, the

language specified on the disc is used.

Section

Operating this unit

You can also switch the audio language by

pressing AUDIO during playback. (Refer to

Changing audio language during playback

(Multi-audio) on page 16.)

The setting made here will not be affected

even if the audio language is switched during

playback using AUDIO.

Notes

Setting the character set

Setting parental lock

When playing discs that do not specify

PANSCAN, the disc is played back in

LETTER BOX display even if you select the

PANSCAN setting. Confirm whether the disc

16 : 9 LB

You can set the preferred character set for DivX subti-

tle file, information display and list display.

Some DVD video discs let you use parental lock to re-

strict children from viewing violent and adult-oriented

scenes. You can set parental lock to the desired level.

Move the thumb pad up or down to select CHAR-

ACTER SET in LANG.

Click the thumb pad.

A character set setting menu is displayed.

Move the thumb pad up or down to select the de-

sired character set.

When you have a parental lock level set and play

a disc featuring parental lock, code number input

indications may be displayed. In such cases, play-

back will begin when the correct code number is

entered.

package bears the

mark.

The TV aspect ratio cannot be changed for

some discs. For details, refer to the disc’s in-

structions.

If you have selected OTHERS, refer to When

you select OTHERS on the previous page.

Click the thumb pad.

Setting the code number and level

A code number must be registered in order to play

back discs with parental lock.

The character set is set.

Setting the menu language

Setting the slide show interval

Move the thumb pad up or down to select PAR-

ENTAL in GEN.

JPEG files can be viewed as a slide show on this unit.

In this setting, the interval between each image can

be set.

Setting the angle icon display

Move the thumb pad up or down to select MENU

LANG. in LANG.

Click the thumb pad.

A menu language menu is displayed.

Move the thumb pad up, down, left or right to se-

lect the desired menu language.

Click the thumb pad

Click the thumb pad.

Parental lock setting menu is displayed.

Press 0 to 9 to input a four digit code number.

Move the thumb pad left or right to move the cur-

sor to the previous or next position.

Click the thumb pad after entering the four digit

code number.

The angle icon can be set so it appears on scenes

where the angle can be switched.

Move the thumb pad up or down to select SLIDE-

SHOW TIME in PICT.

Click the thumb pad.

A slide show interval time menu is displayed.

Move the thumb pad up or down to select the de-

sired TV aspect.

Move the thumb pad up or down to select ANGLE

ICON DISPLAY in PICT.

Click the thumb pad to select on or off.

A character set setting menu is displayed.

The menu language is set.

The code number is set, and the level can now be

set.

Manual – JPEG images can be switched

Notes

manually

Move the thumb pad left or right to select the de-

sired level.

If the selected language is not available, the

5sec – JPEG images switch at intervals of 5

Setting the aspect ratio

language specified on the disc is displayed.

If you have selected OTHERS, refer to When

you select OTHERS on the previous page.

seconds

LEVEL8 – Playback of the entire disc is possi-

ble (initial setting)

10sec – JPEG images switch at intervals of 10

There are two kinds of display: a wide screen display

that has a width-to-height ratio (TV aspect ratio) of

16:9, and regular display that has a TV aspect of 4:3.

Be sure to select the correct TV aspect for the display

connected to V OUT.

seconds

LEVEL7 to LEVEL2 – Playback of discs for

children and non-adult-oriented discs is pos-

sible

15sec – JPEG images switch at intervals of 15

seconds

Click the thumb pad.

LEVEL1 – Playback of discs for children only

is possible

Setting the on screen display

language

When using regular display, select either LETTER

BOX or PANSCAN. Selecting 16:9 may result in

an unnatural picture.

The slideshow interval time is set.

Click the thumb pad.

The parental lock level is set.

You can set the preferred language for information

display, DVD setup menu and list display etc.

If you select the TV aspect ratio, the unit’s display

will change to the same setting.

Move the thumb pad up or down to select TV AS-

PECT in PICT.

Click the thumb pad.

TV aspect menu is displayed.

Notes

Move the thumb pad up or down to select OSD

LANGUAGE in LANG.

Click the thumb pad.

An on screen display language menu is dis-

played.

Move the thumb pad up or down to select the de-

sired on screen display language.

Click the thumb pad.

We recommend to keep a record of your code

number in case you forget it.

The parental lock level is stored on the disc.

Look for the level indication written on the

disc package, included literature or on the

disc itself. Parental lock of this unit is not pos-

sible if a parental lock level is not stored on

the disc.

Move the thumb pad up or down to select the de-

sired TV aspect.

16:9 – Wide screen picture (16:9) is displayed

as is (initial setting)

The on screen display language is set.

LETTER BOX – The picture is the shape of a

letterbox with black bands on the top and bot-

tom of the screen

With some discs, the parental lock may be ac-

tive only for certain levels of scenes. The play-

back of those scenes will be skipped. For

details, refer to the instruction manual that

came with the disc.

PANSCAN – The picture is cut short on the

right and left sides of the screen

Click the thumb pad.

Section

Operating this unit

Up to 126 characters can be displayed on one

screen. If more than 126 characters are set,

the excess characters will not be displayed.

Changing the level

Displaying the deregistration code

CLOCK SET (setting the clock)

You can change the set parental lock level.

If your device is already activated, deregister it by en-

tering the deregistration code.

Press M.C. to display the setting mode.

Press M.C. to select the segment of the clock dis-

play you wish to set.

Move the thumb pad up or down to select PAR-

ENTAL in GEN.

Move the thumb pad up or down to select DivX

VOD in GEN.

Click the thumb pad.

Each time you press M.C., one segment of the

clock display is selected.

Hour—Minute

Setting for digital output

Click the thumb pad.

Move the thumb pad up or down to select DE-

REGISTRATION CODE.

Parental lock setting menu is displayed.

Press 0 to 9 to input the registered code number.

Move the thumb pad left or right to move the cur-

sor to the previous or next position.

Click the thumb pad after entering the four digit

code number.

Audio which is outputted from digital output of this

unit can be selected. Normally, set to STREAM. If this

unit’s digital output is not used, there is no need to

change settings.

Turn M.C. to adjust the clock.

Click the thumb pad.

Move the thumb pad up or down to select OK.

FM STEP (FM tuning step)

To cancel deregistration, select CANCEL.

Selecting Linear PCM enables you to switch the

output channel if playing dual mono mode DVD

video discs.

Move the thumb pad up or down to select IEC DI-

GITAL OUTPUT in GEN.

The FM tuning step employed by seek tuning can be

switched between 100 kHz, the preset step,

and 50 kHz.

Click the thumb pad.

This sets the code number, and the level can now

be changed.

The deregistration is complete.

If you input an incorrect code number, the

icon

is displayed. Input the correct code

If seek tuning is performed in 50 kHz steps, sta-

tions may be tuned in imprecisely. Tune in the sta-

tions with manual tuning or use seek tuning

again.

number.

Click the thumb pad to select the desired digital

output setting.

Setting the down sampling output

If you forget your code number, refer to If you

forget your code number on this page.

STREAM – The Dolby Digital/DTS signal is

output as it is (initial setting)

The tuning step remains at 50 kHz during manual

tuning.

If the sampling frequency of the audio is more than

96 kHz, the audio outputted from the digital output of

this unit can be reduced to 48 kHz. Normally, set the

down sampling output to on. If this unit’s digital out-

put is not used, there is no need to change settings.

Move the thumb pad left or right to select the de-

sired level.

Click the thumb pad.

Linear PCM – The Dolby Digital/DTS signal is

converted to and output as a linear PCM sig-

nal

Press M.C. to display the setting mode.

Turn M.C. to select the FM tuning step.

50KHZ (50 kHz)—100KHZ (100 kHz)

Press M.C. to confirm the selection.

The parental lock level is set.

Move the thumb pad up or down to select SAM-

PLING OUTPUT in GEN.

AM STEP (AM tuning step)

If you forget your code number

Click the thumb pad.

Displaying the DivX VOD

registration code

Each time you click the thumb pad the selected

setting switches on or off.

Press M.C. to display the setting mode.

Turn M.C. to select the AM tuning step.

10KHZ (10 kHz)—9KHZ (9 kHz)

Please see the following section, and press CLEAR 10

times in the parental lock setting menu. Refer to

Changing the level on this page. The registered code

number is canceled, letting you register a new one.

In order to play DivX VOD (video on demand) con-

tents on this unit, the unit must first be registered

with a DivX VOD contents provider. For registration,

generate a DivX VOD registration code and submit it

to your provider.

Press M.C. to confirm the selection.

AUX1 (front AUX input setting)

Activate this setting when using an auxiliary device

connected to this unit.

Initial Settings

Setting the DivX subtitle file

Keep a record of the code as you will need it

when you register your unit to the DivX VOD provi-

der.

Move the thumb pad up or down to select DivX

VOD in GEN.

Click the thumb pad.

Move the thumb pad up or down to select REGIS-

TRATION CODE.

Press and hold S (SRC/OFF) until the

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

AUDIO (auxiliary device connected with stereo

mini plug cable) – VIDEO (auxiliary video device

connected with a 4-pole mini plug cable) – OFF

(No auxiliary device)

You can select whether or not to display DivX external

subtitles.

unit turns off.

The DivX subtitles will be displayed even when

CUSTOM is selected if no DivX external subtitle

files exist.

Press M.C. and hold until the initial set-

ting menu appears in the display.

Move the thumb pad up or down to select DivX

SUBTITLE in GEN.

Click the thumb pad to select whether to display

DivX external subtitles or not.

Press M.C. to confirm the selection.

Turn M.C. to select one of the initial set-

Click the thumb pad.

Your registration code is displayed.

tings.

AUX2 (rear RCA input setting)

After selecting, perform the following proce-

dures to set the initial setting.

Press M.C. to turn AUX2 on or off.

ORIGINAL – Display the DivX subtitles

CUSTOM – Display the DivX external subtitles

VIDEO IN (Setting AV input)

Notes

Up to 42 characters can be displayed on one

line. If more than 42 characters are set, the

line breaks and the characters are displayed

on the next line.

Section

Operating this unit

When the display connection is set to

on, the files of the currently playing

folder are displayed.

When the display connection is set to

off, the file of the root folder is dis-

played.

Use the rear RCA input to connect an

You can connect AV components to the AV input with

an RCA cable.

Switch the AV input setting according to the con-

nected AV component.

You can minimize distortion that may be caused by

the equalizer curve settings.

Setting an equalizer level high can cause distortion. If

high sound is crippled or distorted, try switching to

LOW. Normally, leave the setting at HIGH to ensure

quality sound.

auxiliary device featuring RCA output.

For more details, refer to the installation man-

ual.

This auxiliary device is automatically set to

AUX2.

For more details, refer to the installation manual.

Select EXT-VIDEO to watch video of a connected

video unit as EXTERNAL source.

Select AUX to watch video of an auxiliary device

as AUX2 source.

This function is available only when the multi-

channel processor (DEQ-P7650) is connected to

this unit.

— Playing a compressed audio file and press-

This type of connection can only be made if

ing

in the file name list

the auxiliary device has RCA outputs.

Press M.C. to display the setting mode.

Turn M.C. to switch the digital attenuator setting.

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

OFF (off)—EXT-VIDEO (external video unit)—AUX

(auxiliary device)

When the display connection is set to

on, the name of the currently playing

file is selected.

When the display connection is set to

off, you can return to the previous list

(the folder one level higher).

Press S (SRC/OFF) to select AUX2 as the

HIGH – High quality sound

LOW – Minimize distortion sound

source.

Press M.C. to confirm the selection.

To watch video of AUX source, set auxiliary 2 set-

ting on. For details, refer to AUX2 (rear RCA input

setting) on the previous page.

RESET (Resetting the audio functions)

Switching between digital

and analog

When this unit is connected to the DEQ-

P7650, you can switch to the AUX mode to

analog or digital. However, when you use

AUX2 as the source, make sure the AUX

mode is set to analog.

This function is available only when the multi-

channel processor (DEQ-P7650) is connected to

this unit.

SCROLL (ever scroll)

Using AUX1 and AUX2 source

About AUX1 and AUX2

There are two methods to connect auxiliary de-

vices to this unit.

When ever scroll is set to EVER, recorded text infor-

mation scrolls continuously in the display. Set to off if

you prefer the information to scroll just once.

You can reset audio functions other than the following

settings.

Volume setting (refer to Adjusting the volume on

page 9)

Listening position setting (refer to Using the posi-

tion selector on page 34)

Fader/balance setting (refer to Using fader/balance

adjustment on page 34)

SLA (source level adjustment) setting (refer to Ad-

justing source levels on page 36)

Dynamic range control (refer to Using dynamic

range control on page 36)

Press M.C. to display the setting mode.

Turn M.C. to select the desired setting.

EVER (ever)—OFF (off)

Press S (SRC/OFF) to select AUX2 as the

Press M.C. to confirm the selection.

source.

AUX1 source

When connecting auxiliary device using the

front AUX input.

COLOR SYS (DVD output signal setting)

Press S (SRC/OFF) until AUX2 appears in the

display.

cannot be selected. For more details, refer to

AUX2 (rear RCA input setting) on page 29.

When this unit is connected to a display, you need to

adjust the DVD output signal suitable to DVD and

your display signal setting.

If the auxiliary setting is not turned on, AUX2

You need to activate the AUX setting in the

initial setting menu. Refer to AUX1 (front

AUX input setting) on page 29.

Press M.C. to display the setting mode.

Turn M.C. to select an appropriate DVD output

signal.

Direct control setting (refer to Using direct control

on page 36)

Down-mix setting (refer to Using the down-mix

function on page 36)

Press B (BAND/ESC) to switch the

NTSC—PAL

Insert the mini plug into the AUX input

jack on this unit.

For more details, refer to Head unit on page 5.

This auxiliary device is automatically set to

AUX1.

Press M.C. to confirm the selection.

modes.

Press M.C. to display the setting mode.

Turn M.C. to display YES.

Press M.C.

ANALOG (analog) — DIGITAL (digital)

V.OUT (display connection)

You can use this unit with or without the display.

When using this unit connected to the display, you

can turn the display connection setting on or off. If

you turn this function on, the detailed text information

of the DVD, USB and USB-iPod source appears on

the display.

REALLY? appears in the display.

Press M.C. to reset audio functions.

COMPLETE appears in the display.

Displaying the clock

Press S (SRC/OFF) to select AUX1 as the

source.

Press

to turn the clock display on or

Notes

off.

Press M.C. to turn display connection on or off.

When V.OUT is set to ON, you cannot switch

Note

to SCROLL.

DIGITALATT (Correcting distorted sound)

AUX2 source

When connecting auxiliary device using the

rear RCA input.

The clock display disappears temporarily when

you perform other operations, but the clock dis-

play appears again after 25 seconds.

According to the setting of V.OUT, the opera-

tion of this unit differs. The examples are as

follows:

You need to activate the AUX setting in the

initial setting menu. Refer to AUX2 (rear

RCA input setting) on page 29.

— Playing a compressed audio file and dis-

playing the file name list mode

Section

Operating this unit

Available accessories

Bluetooth adapter

Advanced operations

Using an external unit

Digital Signal Processor

Press M.C. to display the main menu.

An external unit refers to a Pioneer product,

such as those which will be available in the fu-

ture. Although incompatible as a source, the

basic functions of up to two external units can

be controlled with this unit. When two external

units are connected, the external units are

automatically allocated to external unit 1 or ex-

ternal unit 2.

The basic operations of the external unit are

explained below. The allocated functions will

differ depending on the connected external

unit. For details concerning these functions,

refer to the owner’s manual for the external

unit.

You can use this unit to control a Bluetooth

adapter, which is sold separately.

You can use this unit to control a DEQ-P7650

multi-channel processor (sold separately).

By carrying out the following settings/adjust-

ments in the order shown, you can effortlessly

create a finely-tuned sound field.

Use M.C. to select FUNCTION.

For details concerning operation, refer to the

Bluetooth adapter’s manuals. This section

provides information on Bluetooth telephone/

audio operations with this unit which differs

from that described in the Bluetooth adapter’s

manual.

Turn to change the menu option. Press to se-

lect.

Setting the speaker setting

Using the position selector

Auto TA and EQ (auto-time alignment and auto-

equalizing)

Turn M.C. to select the function.

FUNCTION 1 (function 1)—FUNCTION 2

(function 2)—FUNCTION 3 (function 3)—

FUNCTION 4 (function 4)—AUTO/MANU

(auto/manual)

In some countries, CD-BTB100 is not sold

on the market.

Adjusting time alignment

Adjusting the speaker output levels using a

test tone

This unit is a head unit group 1 unit.

— But the selecting a function operation is

the same as that of the head unit group

You can also select the function by pressing

FUNC on the remote control.

Selecting a cross-over frequency

Adjusting the speaker output levels

Adjusting the 3-band parametric equalizer

— When a phone call ends, the system re-

turns to the previous source.

Selecting the external unit as

the source

— When a call comes in during sources

other than Bluetooth telephone/audio

source and the call is being carried on,

you cannot use B (BAND/ESC) to switch

Bluetooth telephone and Bluetooth

audio.

Introduction of DSP adjustments

Press M.C. to display the main menu.

Press S (SRC/OFF) to select EXTERNAL as

the source.

Use M.C. to select AUDIO.

Turn to change the menu option. Press to se-

lect.

Basic operations

The functions allocated to the following opera-

tions will differ depending on the connected

external unit. For details concerning these

functions, refer to the owner’s manual for the

connected external unit.

Turn M.C. to select the audio function.

FADER (balance adjustment)—POSI (position

selector)—PLII (Dolby Pro Logic II)—PANO

(music mode adjust)—OFF (sound field con-

trol)—Lo/Ro (down mix)—DRC (dynamic

range control)—DIRECT (direct)—SLA (source

level adjustment)—AUTO EQ (auto-equalizer

on/off)—FRONT (speaker setting)—HPF

(cross-over frequency)—FRONT-L (speaker

output level)—TEST TONE (test tone)—

Press B (BAND/ESC).

Press and hold B (BAND/ESC).

Press c or d.

INITIAL (time alignment mode)—FL (time

alignment adjustment)—POWERFUL (equali-

zer recall)—PEQ (3-band parametric equalizer)

Press and hold c or d.

Press a or b.

You can also use A.MENU on the remote con-

trol to select an audio menu.

You can switch to PLII when the speaker set-

ting for either center or rear speakers is set to on.

When direct control is on, you can select PLII,

PANO and DIRECT in the audio function menu.

When you select MUSIC in the PLII, you can

select adjusting music mode.

Using the functions allocated

to 1 to 6 keys

Press any of 1 to 6.

Section

Available accessories

DRC is only effective for Dolby Digital sound.

When selecting FM as the source, you cannot

delay time to match the number and position

of the occupied seats. When used in conjunc-

tion with the SFC, this feature will make the

sound image more natural and offer a panora-

mic sound that envelops you.

Press c or d to select the desired

front left and right speakers over a range 0 to

3 is the default and it’s recommended for

most recordings. 0 places all center sound in

the center speaker. 7 places all center sound

equally in the left/right speakers.

mode.

switch to SLA.

When you select TA :OFF in INITIAL, you can-

not select FL.

MOVIE – Suitable for movie playback

MUSIC – Suitable for music playback

MATRIX – Suitable when FM radio recep-

tion is weak

You cannot select AUTO EQ if auto TA and EQ

When adjustments are made to the listen-

ing position, the speaker outputs are auto-

matically set to the appropriate levels. To

tailor the levels more precisely, refer to Ad-

justing the speaker output levels using a

test tone on page 38 or Adjusting the speak-

er output levels on page 38.

has not been carried out. SET A-EQ is displayed.

OFF – Turn Dolby Pro Logic II off

To return to the display of each source, press

B (BAND/ESC).

If you do not operate the DSP function except

Using sound field control

The SFC function creates the sensation of a

live performance.

Adjusting the music mode

You can adjust the music mode with the fol-

lowing three controls.

for TEST TONE, FL and PEQ within about 30 sec-

onds, the display is automatically returned to the

source display.

The acoustics of performance spaces differ

depending on the extent and contour of

space through which sound waves can

move and on how the created sounds

bounce off the stage, walls, floors and ceil-

ings. At a live performance you hear music

in three stages: direct sound, early reflec-

tions, and late reflections, or reverbera-

tions. These factors are programmed into

the SFC circuitry to recreate the acoustics

of various performance settings.

Panorama (PANO) extends the front stereo

image to include the surround speakers for

an exciting “wraparound” effect.

Dimension (DIME) gradually adjusts the

sound field either towards the front or rear.

Center width control (CENTER) positions

center-channel sounds between the center,

left and right speakers. It improves the left-

center-right stage presentation for both the

driver and front passenger.

Use M.C. to select POSI in the audio

function menu.

Refer to Introduction of DSP adjustments on

the previous page.

Using fader/balance adjustment

You can change the fader/balance setting to

provide an ideal listening environment for all

of the occupied seats.

Press c/d/a/b to select a listening po-

sition.

Use M.C. to select FADER in the audio

Direction Display Position

function menu.

Refer to Introduction of DSP adjustments on

the previous page.

F/L

Left front seat

Right front seat

Front seats

Use M.C. to select PANO (adjusting

Use M.C. to select OFF (sound field con-

F/R

FRT

ALL

music mode) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

If the balance setting has been previously ad-

trol) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

justed, BALANCE will be displayed.

All seats

You can adjust the music mode only when

Press a or b to adjust front/rear speak-

MUSIC has been selected in PLII (Dolby Pro Logic

II).

er balance.

Press c or d to select the desired SFC

To cancel the selected listening position,

FADER :F25 to FADER :R25 is displayed as the

front/rear speaker balance moves from front to

rear.

mode.

press the same button again.

MUSICAL (musical)—DRAMA (drama)—

ACTION (action)—JAZZ (jazz)—HALL (hall)—

CLUB (club)—OFF (off)

Press c or d to select controls.

PANO (panorama)—DIME (dimension)—

CENTER (center width)

Using Dolby Pro Logic II

Dolby Pro Logic II creates five full-bandwidth

output channels from two-channel sources to

achieve high-purity matrix surround sound.

FADER : 0 is the proper setting when only two

speakers are used.

Note

Press d to select PANO and then press

Press c or d to adjust the left/right

If the source is a 2-channel LPCM or Dolby Digital

audio source, we recommend turning Dolby Pro

Logic II on when selecting SFC effects that are

most suitable for 5.1-channel audio sources

(such as MUSICAL, DRAMA or ACTION).

On the other hand, when selecting SFC effects

that are suitable for 2-channel audio sources

(such as JAZZ, HALL or CLUB), we recommend

turning Dolby Pro Logic II off.

a to turn the panorama control on.

speaker balance.

If both the center and the rear speakers are

set to OFF, you cannot use this function.

Dolby Pro Logic II supports stereo sources

with a sampling rate of up to 48 kHz and

has no effect on other types of sources.

To turn the panorama control off, press b.

BALANCE:L25 to BALANCE:R25 is displayed

as the left/right speaker balance moves from

left to right.

Press d to select DIME and then a or b

to adjust front/rear speaker balance.

+3 to –3 is displayed as the front/rear speaker

balance moves from front to surrounds.

Using the position selector

Use M.C. to select PLII in the audio func-

One way to assure a more natural sound is to

optimize the stereo image and place you right

in the center of the sound field. With the posi-

tion selector function, you can automatically

adjust the speaker output levels and insert a

tion menu.

Refer to Introduction of DSP adjustments on

the previous page.

Press d to select CENTER and then a or

b to adjust the center image.

Each time a or b is pressed it gradually

spreads the center channel sound into the

Section

Available accessories

You can switch REV (reverse phase) or NOR

Press a and b to turn the direct control

Use M.C. to select AUTO EQ in the

Using the down-mix function

Multi-channel audio can be played back in 2-

channels with the down-mix function.

(normal phase) when PHASE (subwoofer setting)

has been selected.

on or off.

audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

Adjusting source levels

If auto TA and EQ have not been carried out,

Use M.C. to select Lo/Ro (down mix) in

Correcting the subwoofer’s phase

With SLA (source level adjustment), the vo-

lume levels of each source can be adjusted to

prevent significant differences between

sources.

SET A-EQ is displayed instead of AUTO EQ.

the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

If boosting the bass output from the subwoo-

fer is not effective or you feel that the bass is

becoming less clear, the subwoofer output

and bass content emitted from the other

speakers may be canceling each other out.

Press a to turn the auto-equalizer on.

ON appears in the display.

To turn auto-equalizer off, press b.

Press c or d to switch the down mix

Settings are based on the FM volume level,

which remains unchanged.

settings.

Lt/Rt – Down mixing so that the surround

sound components can be restored (de-

coded).

Lo/Ro – Stereo mixing the original audio

data that does not contain channel modes

such as surround sound components.

Use M.C. to select FRONT (speaker set-

Setting the speaker setting

Compare the FM volume level with the

ting) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

level of the source you wish to adjust.

Be sure to adjust the speaker settings, such

as size (bass capacity), according to the

speakers installed. Set the size to LRG (large)

if the speaker is capable of reproducing

sounds of about 100 Hz and below. Otherwise,

select SML (small).

Use M.C. to select SLA in the audio

function menu.

Refer to Introduction of DSP adjustments on

page 33.

Press c or d to select SUB.W.

Refer to Setting the speaker setting on this

page.

Using dynamic range control

Low frequency sound is not emitted if the

subwoofer is set to OFF and the front and

rear speakers are set to SML or OFF.

It is imperative that speakers that are not

installed be set to OFF.

Set the front or rear speaker to LRG if the

speaker is capable of reproducing bass

content, or if no subwoofer is installed.

Press a or b to adjust the source vo-

on.

Press a to turn the subwoofer output

The dynamic range refers to the difference be-

tween the smallest and largest sounds

emitted. Dynamic range control compresses

this difference so that the sounds can be

heard clearly even at low volume levels.

lume.

Each time M.C. is pushed up or down, source

volume increases or decreases.

+4 to –4 is displayed as the source volume is

increased or decreased.

Press d to select PHASE (subwoofer

setting).

The dynamic range control is only effective

for Dolby Digital sound.

Press a or b to select the phase of sub-

Notes

woofer output.

Press a to select NOR (normal phase). Press

b to select REV (reverse phase).

The AM volume level can also be adjusted

with this function.

Video CD, CD, compressed audio and DivX

are automatically set to the same source level

adjustment volume.

External unit 1 and external unit 2 are automa-

tically set to the same source level adjustment

volume.

iPod and USB storage device are automati-

cally set to the same source level adjustment

volume.

Use M.C. to select FRONT (speaker set-

Use M.C. to select DRC in the audio

ting) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

function menu.

Refer to Introduction of DSP adjustments on

page 33.

Note

When playing a 2-channel mono source with

Dolby Pro Logic II turned on:

Press c or d to select the speaker to be

Press a and b to turn the dynamic

No sound is emitted if the center speaker set-

ting is SML or LRG and no center speaker is

installed.

adjusted.

range control on and off.

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)—SUB.W

(subwoofer)—PHASE (subwoofer setting)

Using direct control

You can override the audio settings to check

their effectiveness.

You can only switch to PHASE when the sub-

Selecting a cross-over frequency

woofer has been set to ON.

The frequency under which sounds are repro-

duced through a subwoofer can be selected.

For example, if the size of one of the installed

speakers is set to SML, you can select the fre-

quency under which sounds will be repro-

duced through a speaker set to LRG or a

subwoofer.

When direct control is on, all audio func-

tions except VOLUME and PLII are locked.

Using the auto-equalizer

Press a or b to select the correct size

The auto-equalizer is the equalizer curve cre-

ated by auto TA and EQ (refer to Auto TA and

EQ (auto-time alignment and auto-equalizing)

on page 41).

for the selected speaker.

OFF (off)—SML (small)—LRG (large)

Use M.C. to select DIRECT in the audio

function menu.

Refer to Introduction of DSP adjustments on

page 33.

You cannot select OFF when FRONT (front

speakers) has been selected.

You can select ON or OFF when SUB.W (sub-

woofer) has been selected.

You can turn the auto-equalizer on or off.

Section

Available accessories

Use M.C. to select HPF in the audio

Press a or b to adjust the speaker out-

Press B (BAND/ESC) to return to the or-

Use M.C. to select FL (time alignment

function menu.

Refer to Introduction of DSP adjustments on

page 33.

put level.

dinary display.

adjustment) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

+10 to –10 is displayed as the level is in-

creased or decreased.

Notes

If necessary, select speakers and adjust their

‘absolute’ output levels. (Refer to Adjusting

the speaker output levels on the previous

page.)

You will get the same results whether you ad-

just the speaker output levels with this mode

or with FRONT-L.

When you select TA :OFF in INITIAL, you can-

Press c or d to select the speaker to be

Note

not select FL.

CHECK POSI is displayed. To set the position,

refer to Using the position selector on page 34.

adjusted.

You will get the same results whether you adjust

the speaker output levels with this mode or with

TEST TONE.

If a position other than F/L or F/R is selected,

F (front speakers)—C (center speaker)—R

(rear speakers)—SW (subwoofer)

Press a or b to select cross-over fre-

Press c or d to select the speaker to be

Adjusting the speaker output levels

using a test tone

You can easily get the right overall balance

among the speakers with this function.

quency for the selected speaker.

63—80—100—125—160—200 (Hz)

adjusted.

FL (front speaker left)—C (center speaker)—FR

(front speaker right)—RR (rear speaker right)

— RL (rear speaker left)— SW (subwoofer)

Using time alignment

The distance between the listening position

and each speaker can be adjusted with this

function.

Note

When you select a cross-over frequency, you are

setting the cross-over frequency for the subwoo-

fer’s L.P.F. (low-pass filter) and the SML speaker’s

H.P.F. (high-pass filter). The cross-over frequency

setting has no effect if the subwoofer is set to

OFF and other speakers are set to LRG or OFF.

Speakers with the size set to OFF cannot be

Use M.C. to select TEST TONE in the

selected. (Refer to Setting the speaker setting on

page 37.)

audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

Use M.C. to select INITIAL (time align-

ment mode) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

Press a or b to adjust the distance be-

tween the selected speaker and the listen-

ing position.

0.0 (cm) to 500.0 (cm) is displayed as the dis-

tance is increased or decreased.

Press d to start the test tone output.

The test tone is emitted from each speaker in

the following sequence at intervals of about

two seconds. The current settings for the

speaker emitting the test tone will be shown

on the display.

FRONT-L (left front speaker)—CENTER (center

speaker)—FRONT-R (right front speaker)—

REAR-R (right rear speaker)—REAR-L (left rear

speaker)—SUB.W (subwoofer)

Adjusting the speaker output

levels

Fine adjustments of the speaker output level

can be made by listening to audio output.

First, use the test tone to adjust the speaker to

an approximate level, and then use this func-

tion to make fine adjustments.

Press c or d to select the time align-

ment.

INITIAL – Initial time alignment (factory set-

ting)

AUTO TA – Time alignment created by auto

TA and EQ. (Refer to Auto TA and EQ (auto-

time alignment and auto-equalizing) on

page 41.)

Press B (BAND/ESC) to return to the or-

dinary display.

Using the equalizer

You can adjust the equalization to match the

car’s interior acoustic characteristics as de-

sired.

Check each speaker output level. If no adjust-

CUSTOM – Adjusted time alignment that

you can create

TA :OFF – Turns Time Alignment off

Adjusting the speaker output levels

ments are necessary, perform step 4 to stop the

test tone.

Use M.C. to select FRONT-L (speaker

The settings for speakers with the size set to

output level) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

If auto TA and EQ have not been carried out,

OFF will not be displayed. (Refer to Setting the

speaker setting on the previous page.)

you cannot select AUTO TA. In this case,

SET A-TA is displayed.

Press a or b to adjust the speaker out-

Press c or d to select the speaker to be

Adjusting time alignment

The distance between the selected position

and each speaker can be adjusted.

put level.

adjusted.

+10 to –10 is displayed as the level is in-

creased or decreased.

speaker after about two seconds after the last op-

eration.

FRONT-L (left front speaker)—CENTER (center

speaker)—FRONT-R (right front speaker)—

REAR-R (right rear speaker)—REAR-L (left rear

speaker)—SUB.W (subwoofer)

The test tone will be emitted from the next

The adjusted time alignment is stored in

CUSTOM.

Speakers with the size set to OFF cannot be

selected. (Refer to Setting the speaker setting on

the previous page.)

Press c to stop the test tone output.

Section

Available accessories

Press c or d to select the desired item.

Be sure to perform auto TA and EQ using

the optional microphone. Using another

microphone may prevent measurement, or

result in incorrect measurement of the

car’s interior acoustic characteristics.

In order to perform auto TA and EQ, the

front speaker must be connected.

When this unit is connected to a power

amp with input level control, auto TA and

EQ may not be possible if the power amp’s

input level is set below the standard level.

When this unit is connected to a power

amp with an LPF, turn this LPF off before

performing auto TA and EQ. Also set the

cut-off frequency for the built-in LPF of an

active subwoofer to the highest frequency.

The time alignment value resulting from

auto TA and EQ has been calculated by a

computer and is the optimum delay time

that will give accurate results. Be sure to

use the resulting value although it may dif-

fer from the actual distance when:

— The reflected sound within the car is

strong and delays occur.

— The LPF on active subwoofers or exter-

nal amps delay the lower sounds.

Auto TA and EQ changes the audio settings

as follows:

— The fader/balance settings return to the

center position. (Refer to Using fader/

balance adjustment on page 34.)

— The equalizer curve switches to FLAT.

(Refer to Recalling equalizer curves on

the previous page.)

Recalling equalizer curves

Auto TA and EQ (auto-time

alignment and auto-equalizing)

PEQ FRONT (speakers)—FRONT:LOW

(bands)—F LOW : 80 (center frequency)—

F LOW : 0 (equalizer level)—LOW 0 :WIDE (Q

factor)

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Auto-time alignment automatically adjusts the

time alignment according to the distance be-

tween the listening position and each speaker.

The auto-equalizer automatically measures

the car’s interior acoustic characteristics, and

then creates an auto-equalizer curve based on

that information.

The equalizer curves for CUSTOM1 and

CUSTOM2 can be adjusted.

Press d to select the speakers setting

When FLAT, no changes are made to the

sound. You can check the effects of the

equalizer curves by switching alternatively

between FLAT and another equalizer curve.

and then a or b to select the speaker to be

adjusted.

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)

To perform this function, dedicated micro-

phone (e.g. CD-MC20) is required.

Speakers with the size set to OFF cannot be

Use M.C. to select POWERFUL (equali-

selected. (Refer to Setting the speaker setting on

page 37.)

zer recall) in the audio function menu.

Refer to Introduction of DSP adjustments on

page 33.

WARNING

As a loud tone (noise) may be emitted from the

speakers when measuring the car’s interior

acoustic characteristics, never perform auto TA

or auto EQ while driving.

Press d to select the band setting and

then press a or b to select the equalizer

band to be adjusted.

LOW (low)—MID (mid)—HI (high)

Press c or d to select the equalizer.

POWERFUL—NATURAL—VOCAL—FLAT—

CUSTOM1—CUSTOM2—SUPER-BASS

Press d to select the center frequency

CAUTION

setting and then press a or b to select the

center frequency of selected band.

40—50—63—80—100—125—160—200—

250—315—400—500—630—800—1K—

1.2K—1.6KHZ—2K—2.5K—3.1K—4K—5K

—6.3K—8K—10K—12K (Hz)

Adjusting the 3-band parametric

equalizer

For CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the front, rear and cen-

ter equalizer curves separately by selecting a

center frequency, an equalizer level and a Q

factor for each band.

Thoroughly check the conditions before per-

forming auto TA and EQ as the speakers may

be damaged if these functions are performed

when:

— The speakers are incorrectly connected.

(For example, when a rear speaker is con-

nected as a subwoofer output.)

— A speaker is connected to a power amp de-

livering output higher than the speaker’s

maximum input power capability.

Press d to select the equalizer level set-

A separate CUSTOM1 curve can be cre-

ated for each source.

A CUSTOM2 curve that is common for all

sources can be created.

The center speaker largely determines the

sound image and getting the balance right

is not easy. We recommend that you first

adjust the balance among all of the speak-

ers except the center speaker, by playing 2-

channel audio (a CD, for example). Then,

play 5.1-channel audio (Dolby Digital or

DTS) and adjust the center speaker output

to match the balance already created

among the other speakers.

ting and then press a or b to adjust the

equalizer level.

+6 to –6 is displayed as the level is increased

or decreased.

If the microphone is placed in an unsuitable

position the measurement tone may become

loud and measurement may take a long time,

resulting in battery drainage. Be sure to place

the microphone in the specified location.

Press d to select the Q factor setting

and then press a or b to select the desired

Q factor.

WID (wide)—NAR (narrow)

— When a subwoofer is connected to this

unit, it will be adjusted automatically to

both subwoofer output and high pass fil-

ter setting for rear speaker.

Previous settings for auto TA and EQ will be

overwritten.

Adjust the parameters of each band for the

other speakers in the same way.

Before operating the auto TA and EQ

function

Press B (BAND/ESC) to return to the or-

Perform auto TA and EQ in a quiet place,

with both the car engine and air condition-

ing switched off. Also turn off any car

phones or portable telephones in the car, or

remove them from the car. Sounds other

than the measurement tone (such as sur-

rounding sounds, engine sound, tele-

phones ringing) may prevent correct

measurement of the car’s interior acoustic

characteristics.

dinary display.

Note

Performing auto TA and EQ

Stop the car in a place that is quiet,

Use M.C. to select PEQ (3-band para-

A center frequency can be selected for each

band and can be changed in 1/3-octave steps.

However, the interval between the selected center

frequencies cannot be shorter than 1 octave.

metric equalizer) in the audio function

menu.

close all the doors, windows and sun roof,

and then turn the engine off.

If the engine is left running, the noise from the

engine may cause incorrect auto TA and EQ.

Refer to Introduction of DSP adjustments on

page 33.

Adjusted PEQ settings are memorized in

CUSTOM1 in the audio function menu.

Section

Available accessories

Connections

Secure all wiring with cable clamps or electri-

cal tape. Do not allow any bare wiring to re-

main exposed.

Fix the optional microphone in the cen-

Plug the microphone into the micro-

WARNING

ter of the headrest of the driver’s seat, fa-

cing forward.

The auto TA and EQ may differ depending on

where you place the microphone. If desired,

place the microphone on the front passenger

seat to perform auto TA and EQ.

phone input jack on the multi-channel pro-

cessor.

To avoid the risk of accident and the potential

violation of applicable laws, the front DVD or

TV (sold separately) feature should never be

used while the vehicle is being driven. Also,

rear displays should not be in a location

where they are visibly distracting to the driver.

In some countries or states the viewing of

images on a display inside a vehicle even by

persons other than the driver may be illegal.

Where such regulations apply, they must be

obeyed and this unit’s DVD features should

not be used.

Do not drill a hole into the engine compart-

ment to connect the yellow cable of the dis-

play unit to the vehicle battery. Engine

vibration may eventually cause the insulation

to fail at the point where the wire passes from

the passenger compartment into the engine

compartment. Take extra care in securing the

wire at this point.

It is extremely dangerous to allow the display

lead to become wound around the steering

column or gearshift. Be sure to install the dis-

play in such a way that it will not obstruct driv-

ing.

Make sure that wires will not interfere with

moving parts of the vehicle, such as the gear-

shift, parking brake or seat sliding mechan-

ism.

Do not shorten any cables. If you do, the pro-

tection circuit may fail to work properly.

Use speakers over 50 W (output value) and be-

tween 4 W to 8 W (impedance value). Do not

use 1 W to 3 W speakers for this unit.

Press M.C. to start the auto TA and EQ.

When the 10-second countdown starts,

The black cable is ground. When installing

this unit or power amp (sold separately), make

sure to connect the ground wire first. Ensure

that the ground wire is properly connected to

metal parts of the car’s body. The ground wire

of the power amp and the one of this unit or

any other device must be connected to the car

separately with different screws. If the screw

for the ground wire loosens or falls out, it

could result in fire, generation of smoke or

malfunction.

Turn the ignition switch to ON or ACC.

get out of the car and close the door within

10 seconds.

If the air conditioner or heater is turned on,

turn it off. The noise from the fan may cause

incorrect auto TA and EQ.

The measurement tone (noise) is outputted

from the speakers, and auto TA and EQ be-

gins.

Press S (SRC/OFF) to turn the source on if this

Notes

unit is turned off.

When all speakers are connected, auto TA

This unit cannot be installed in a vehicle with-

out ACC (accessory) position on the ignition

switch.

and EQ is completed in about nine minutes.

Select the position for the seat on

To stop auto TA and EQ, press any keys.

To cancel auto TA and EQ part way through,

which the microphone is placed.

Refer to Using the position selector on page

34.

press B (BAND/ESC).

POWER AMP

Ground wire

If no position is selected before auto TA and

10 When auto TA and EQ is completed,

COMPLETE is displayed.

EQ is started, F/L is automatically selected.

When the car’s interior acoustic characteris-

tics cannot be measured correctly, an error

message will be displayed. (Refer to Auto TA

and EQ error messages on page 59.)

Press and hold S (SRC/OFF) until the

ACC position

No ACC position

unit turns off.

Use this unit with a 12-volt battery and nega-

tive grounding only. Failure to do so may result

in a fire or malfunction.

To prevent a short-circuit, overheating or mal-

function, be sure to follow the directions

below.

— Disconnect the negative terminal of the

battery before installation.

— Secure the wiring with cable clamps or ad-

hesive tape. Wrap adhesive tape around

wiring that comes into contact with metal

parts to protect the wiring.

Press and hold 1/S.Rtrv to enter the

auto TA and EQ measurement mode.

11 Press B (BAND/ESC) to cancel the auto

TA and EQ mode.

Other devices

(Another electronic

device in the car)

Metal parts of car’s body

You can also perform this operation by press-

ing and holding A.MENU on the remote control.

12 Store the microphone carefully in the

glove compartment or another safe place.

If the microphone is subjected to direct sun-

light for an extended period, high tempera-

tures may cause distortion, color change or

malfunction.

CAUTION

PIONEER does not recommend that you in-

stall or service your display unit yourself. In-

stalling or servicing the product may expose

you to risk of electric shock or other hazards.

Refer all installation and servicing of your dis-

play unit to authorized Pioneer service person-

nel.

— Place all cables away from moving parts,

such as the gear shift and seat rails.

— Place all cables away from hot places,

such as near the heater outlet.

Section

Connections

— Do not connect the yellow cable to the bat-

tery by passing it through the hole to the

engine compartment.

— Cover any disconnected cable connectors

with insulating tape.

— Do not shorten any cables.

— Never cut the insulation of the power cable

of this unit in order to share the power

with other devices. The current capacity of

the cable is limited.

— Use a fuse of the rating prescribed.

— Never wire the negative speaker cable di-

rectly to ground.

— Never band together negative cables of

multiple speakers.

When this unit is on, control signals are sent

through the blue/white cable. Connect this

cable to the system remote control of an exter-

nal power amp or the vehicle’s auto-antenna

relay control terminal (max. 300 mA 12 V DC).

If the vehicle is equipped with a glass anten-

na, connect it to the antenna booster power

supply terminal.

Never connect the blue/white cable to the

power terminal of an external power amp.

Also, never connect it to the power terminal of

the auto antenna. Doing so may result in bat-

tery drain or a malfunction.

IP-BUS connectors are color-coded. Be sure

to connect connectors of the same color.

Section

Connections

Power cable connection

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

This product

IP-BUS input (Blue)

Antenna jack

IP-BUS cable

(sold separately)

When you connect the separately sold

multi-channel processor (DEQ-P7650) to this

unit, do not connect anything to the speaker

leads and system remote control (blue/white).

Pioneer IP-BUS

accessories

(sold separately)

Black (chassis ground)

Connect to a clean, paint-free metal location.

Blue/white

With a 2 speaker system, do not connect

anything to the speaker leads that are not

connected to speakers.

Connect to system control terminal of the

power amp or auto-antenna relay control

terminal (max. 300 mA 12 V DC).

Fuse (10 A)

Yellow

White

Gray

Connect to the constant 12 V supply terminal.



Front speaker





Front speaker



Fuse resistor

White/black

Green

Gray/black

Violet

Left

Right

Red

Connect to terminal controlled by ignition switch (12 V DC).









Rear speaker

Green/black

Violet/black

Section

Connections

When connecting to separately sold power amp

Connect with RCA cables

(sold separately)

Power amp (sold

separately)

Power amp (sold

separately)

Front output

Rear output

This product

Blue/white

Connect to system control terminal of the power

amp or auto-antenna relay control terminal

(max. 300 mA 12 V DC).

System remote control

Left

Right





Front speaker



When you connect separately sold multi-channel

processor (e.g. DEQ-P7650) to this unit, do not

connect anything to the speaker leads and system

remote control (blue/white).









Rear speaker

Note:

When you connect multi-channel processor to

this unit, separately sold power amp must be

connected to multi-channel processor.

Perform these connections when

using the optional amplifier.

Section

Connections

Connect the optical cable to the optical

When connecting with a multi-channel processor

Connecting and installing the

optical cable connection box

cable connection box.

AV system display

(sold separately)

WARNING

RCA cable

(sold separately)

To video input

Avoid installing the optical cable connection

box in locations where the operation of safety

devices such as airbags is prevented by this

unit. Otherwise, there is a danger of a fatal ac-

cident.

1 Optical cable

Avoid installing the optical cable connection

box in locations where the operation of the

brake may be prevented. Otherwise, it may re-

sult in a traffic accident.

Fix the optical cable connection box securely

with the hook and loop fastener or lock tie. If

the unit is loose, it disturbs driving stability,

which may result in a traffic accident.

Video output

(VIDEO OUTPUT)

Installing the optical cable

connection box

15 cm

This product

When installing the optical cable con-

nection box with the hook and loop fasten-

er.

Black

Install the optical cable connection box using

the hook and loop fastener in the ample space

of the console box.

CAUTION

Blue

DEQ output

Install this unit using only the parts supplied

with this unit. If other parts are used, this unit

may be damaged or could dismount itself,

which leads to an accident or other problems.

Do not install this unit near the doors where

rainwater is likely to be spilled on the unit. In-

cursion of water into the unit may cause

smoke or fire.

Black

Blue

Optical cable connection

box (CD-DD25)

(sold separately)

RCA cable

(supplied with multi-

channel processor)

Optical cable

(supplied with multi-

channel processor)

IP-BUS cable

1 Hook fastener

(supplied with multi-channel

processor)

Connecting the optical cable

2 Loop fastener

Blue

Connect the optical cable and ground

When installing the optical cable con-

nection box with the lock tie.

Wrap the optical cable and connection box

with the protection tape and fasten with the

power code using the lock tie.

lead to the main unit.

Connect the optical cable so that it does not

protrude from the main unit, as shown in the

illustration. Fasten the ground lead to the pro-

trusion on the back of the main unit.

Multi-channel processor

(DEQ-P7650)

(sold separately)

Blue

Black

Pioneer IP-BUS

accessories

(sold separately)

IP-BUS cable

1 Wrap with the protection tape

1 Screw

2 Fasten with the lock tie

Section

Connections

Installation

Important

Secure the mounting sleeve by using a

When using a display

connected to video outputs

When connecting the

external video component

It is necessary to set VIDEO IN to AUX in initi-

al settings when connecting the external video

component.

screwdriver to bend the metal tabs (90°)

into place.

Check all connections and systems before

final installation.

Do not use unauthorized parts as this may

cause malfunctions.

Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

Do not install this unit where:

— it may interfere with operation of the vehi-

cle.

WARNING

Never install the display in a location where it is

visible to the driver while driving.

External video component

(sold separately)

Display with

RCA input jacks

(sold separately)

— it may cause injury to a passenger as a re-

sult of a sudden stop.

1 Dashboard

2 Mounting sleeve

To video input

To video

output

To audio

output

The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

Optimum performance is obtained when the

unit is installed at an angle of less than 30°.

Install the unit as illustrated.

Use commercially available parts when instal-

ling.

RCA cable

(sold

separately)

RCA cable

(sold

separately)

RCA cable

(sold separately)

Video input

(VIDEO INPUT)

Video output

(VIDEO OUTPUT)

To ensure proper heat dispersal when using

this unit, make sure you leave ample space

behind the rear panel and wrap any loose

cables so they are not blocking the vents

when installing the unit.

15 cm

This product

1 Nut

2 Firewall or metal support

3 Metal strap

4 Screw

5 Screw (M4 × 8)

Make sure that the unit is installed securely in

15 cm

This product

DIN front/rear mount

This unit can be properly installed using either

front-mount or rear-mount installation.

Audio input

place. An unstable installation may cause skip-

ping or other malfunctions.

DIN Front-mount

Insert the mounting sleeve into the

dashboard.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough

space, use the mounting sleeve that came

with the vehicle.

Section

Appendix

Installation

Additional Information

Pull the unit out of the dashboard.

DIN Rear-mount

Troubleshooting

Determine the appropriate position

Common

where the holes on the bracket and the

side of the unit match.

Symptom

Cause

Action (Reference page)

The power will not turn on.

The unit will not operate.

Leads and connectors are incor-

rectly connected.

Confirm once more that all connections are

correct.

The fuse is blown.

Rectify the cause and then replace the fuse.

Be sure to install a fuse with the same rating.

Noise and/or other factors are caus- Turn the unit off and then on. (Page 9)

ing the built-in microprocessor to

operate incorrectly.

Removing and re-attaching the

front panel

You can remove the front panel to protect your

unit from theft.

For details, refer to Removing the front panel to

protect your unit from theft and Re-attaching

the front panel on page 9.

Tighten two screws on each side.

Operation with the remote con- The remote control operation mode Switch to the correct remote control mode.

trol is not possible.

is incorrect.

(Page 8)

The unit does not operate cor-

rectly even when the appropriate

remote control buttons are

pressed.

Battery power is low.

Load a new battery.

Try operating with another disc.

Some operations are prohibited

with certain discs.

Playback is not possible.

The disc is dirty.

Clean the disc. (Page 60)

Check the disc type.

The type of disc loaded cannot be

played on this unit.

1 Truss screw (5 mm × 8 mm)

2 Mounting bracket

3 Dashboard or console

The disc loaded is not compatible

with this video system.

Change the disc to one that is compatible

with your video system.

There is no sound.

Cables are not connected correctly. Connect the cables correctly.

The volume level will not rise.

The unit is performing still, slow mo- There is no sound during still, slow motion or

Removing the unit

tion or frame-by-frame playback.

frame-by-frame playback.

Remove the trim ring.

The icon is displayed, and op- The operation is prohibited for the

This operation is not possible.

eration is not possible.

disc.

The operation is not compatible

with the configuration of the disc.

This operation is not possible.

The image displayed stops

The data could no longer be read

Stop playback once, and start playback again.

(pauses) and the unit cannot be during playback.

operated.

There is no sound.

The volume level is low.

Adjust the volume level.

Turn the attenuator off.

Firmly secure the unit.

The attenuator is on.

1 Trim ring

2 Notched tab

The sound and video skip.

The unit is not firmly secured.

Releasing the front panel allows easier ac-

cess to the trim ring.

File size and transmission rate are

above recommended rates.

Create a DivX file that is within the recom-

mended size and transmission rate.

When reattaching the trim ring, point the

side with the notched tab down.

The aspect ratio is incorrect and The aspect ratio setting is incorrect Select the appropriate setting for your display.

the image is stretched.

for the display.

(Page 26)

The motor sounds when the

ignition switch is turned ON (or not a disc is loaded.

is turned to ACC).

The unit is confirming whether or

This is a normal operation.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

No xxxx appears when a dis-

There is no embedded text informa- Switch the display or play another track/file.

play is changed (No Title, for ex- tion.

ample).

Appendix

Additional Information

iPod

Symptom

Cause

Action (Reference page)

Cause

Action

The repeat range changes auto- Another folder was selected during Select the repeat range again.

matically.

repeat play.

The iPod does not operate cor-

rectly.

The cables are incorrectly con-

nected.

Disconnect the cable from the iPod. Once the

iPod’s main menu is displayed, reconnect the

iPod and reset it.

Track search or fast forward/reverse Select the repeat range again.

was performed during file repeat

play.

The iPod version is old.

Update the iPod version.

DVD

Multi-channel processor

Symptom

Cause

Action (Reference page)

Cause

Action (Reference page)

Playback is not possible.

The loaded disc has a different re-

gion number from this unit.

Replace the disc with one featuring the same

region number as this unit.

There is no sound.

The volume level will not rise.

The optical cables are not con-

nected correctly.

Connect the cables correctly.

A parental lock message is dis- Parental lock is activated.

played and playback is not pos-

sible.

Turn parental lock off or change the level.

(Page 27)

Audio output is 2-channel audio The digital output setting is set to

Normally, set the digital output setting to

STREAM. (Page 28)

even though multi-channel

audio is selected.

Linear PCM.

Parental lock cannot be can-

celed.

The code number is incorrect.

Enter the correct code number. (Page 27)

You have forgotten your code num- Press CLEAR 10 times to cancel the code

ber. number. (Page 28)

Dialog language (and subtitle

language) cannot be switched. ture multiple language recordings. not recorded on the disc.

The DVD being played does not fea- The language cannot be switched if they are

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error

message.

You can only switch between items Switch the language using the disc menu.

indicated in the disc menu.

No subtitles are displayed.

The DVD being played does not fea- Subtitles are not displayed if they are not re-

ture subtitles. corded on the disc.

DVD

You can only switch between items Switch the language using the disc menu.

indicated in the disc menu.

Message

Cause

The disc does not have the same re- Replace the DVD with one bearing the correct

gion number as this unit. region number.

Action

REGION ERR (DIFFERENT RE-

GION DISC)

Playback is not performed with The DVD being played does not fea- The language cannot be switched if the se-

the audio language and subtitle ture dialog or subtitles in the se- lected language is not recorded on the disc.

FRMT READ (FORMAT READ) Sometimes there is a delay between Wait until the message disappears and you

the start of playback and when you hear sound.

language settings selected in

SETUP.

lected language.

start to hear any sound.

The viewing angle cannot be

switched.

The DVD being played does not fea- The viewing angle cannot be switched if the

ture scenes shot from multiple an- DVD does not feature scenes recorded from

ERROR-02-XX

The disc is dirty.

Clean the disc.

The disc is scratched.

The disc is loaded upside down.

Replace the disc.

gles.

multiple angles.

Check that the disc is loaded correctly.

You are trying to switch to multi-

Switch between multiple angles when watch-

angle viewing for a scene that was ing scenes recorded from multiple angles.

not recorded from multiple angles.

PROTECT (PROTECTED DISC)

SKIPPED (FILE SKIPPED)

All the files on the inserted disc are Replace the disc.

embedded with DRM.

The image is extremely unclear/ Some discs feature a signal to pro- Since this unit is compatible with the analog

The inserted disc contains DRM

protected files.

Select the playable file.

distorted and dark during play- hibit copying.

back.

copy generation management system, when

playing a disc that has a signal prohibiting

copying, horizontal stripes or other imperfec-

tions may appear when viewed on some dis-

plays. This is not a malfunction.

HEAT (THERMAL PROTECTION The temperature of the unit is out-

IN MOTION)

Wait until the unit returns to a temperature

within the normal operating limits.

side the normal operating range.

EXPIRED (THIS DivX RENTAL

HAS EXPIRED.)

The inserted disc contains expired

DivX VOD content.

Select the playable file.

Video CD

WRITE FAIL (CAN NOT SAVE

DATA)

This unit’s flash memory used as

the temporary storage area is full.

Select the playable file.

Symptom

Cause

Action

ERROR (YOUR DEVICE IS NOT This unit’s DivX registration code

AUTHORIZED TO PLAY THIS

DivX PROTECTED VIDEO)

The PBC (playback control)

menu cannot be called up.

The Video CD being played does not This operation is not available for Video CDs

feature PBC. that do not feature PBC.

has not been authorized by the DivX provider.

VOD contents provider.

Repeat play and track/time

search are not possible.

The Video CD being played features This operation is not available for Video CDs

PBC. that feature PBC.

Appendix

Additional Information

Message

Cause

Action

Message

Cause

Action

NON-PLAY (UNPLAYABLE

DISC)

This type of disc cannot be played

on this unit.

Replace the disc with one that can be played

on this unit.

WRITE FAIL (CAN NOT SAVE

DATA)

This unit’s flash memory used as

the temporary storage area is full.

Select a file that can be played.

The inserted disc does not contain Replace the disc.

any playable files.

ERROR (YOUR DEVICE IS NOT This unit’s DivX registration code

AUTHORIZED TO PLAY THIS

DivX PROTECTED VIDEO)

has not been authorized by the DivX provider.

VOD contents provider.

NON-PLAY (VIDEO RESOLU-

TION NOT SUPPORTED)

The inserted disc contains a high

definition DivX file.

Select a file that can be played.

NON-PLAY (UNPLAYABLE FILE) This type of file cannot be played on Select the playable file.

this unit.

NON-PLAY (UNPLAYABLE FILE) This type of file cannot be played on Select a file that can be played.

this unit.

There are no songs.

Transfer the audio files to the USB portable

audio player/USB memory and connect.

NON-PLAY (VIDEO FRAME-

RATE NOT SUPPORTED)

DivX file’s frame rate is more than

30 fps.

Select a file that can be played.

Security for the connected USB

memory is enabled.

Follow the USB memory instructions to dis-

able security.

NO AUDIO (AUDIO FORMAT

NOT SUPPORTED)

This type of file is not supported on Select a file that can be played.

this unit.

NON-PLAY (VIDEO RESOLU-

TION NOT SUPPORTED)

The inserted external storage device Select a file that can be played.

contains a high definition DivX file.

NON-PLAY (VIDEO FRAME-

RATE NOT SUPPORTED)

DivX file’s frame rate is more than

30 fps.

Select a file that can be played.

USB audio player/USB memory

Message Cause

Action

NO AUDIO (AUDIO FORMAT

NOT SUPPORTED)

This type of file is not supported on Select a file that can be played.

this unit.

FRMT READ (FORMAT READ) Sometimes there is a delay between Wait until the message disappears and you

the start of playback and when you hear sound.

start to hear any sound.

iPod

SKIPPED (FILE SKIPPED)

The connected USB portable audio Play an audio file not embedded with

player/USB memory contains WMA Windows Media DRM 9/10.

files that are protected by Windows

Message

Cause

Action

FRMT READ (FORMAT READ)/ Sometimes there is a delay between Wait until the message disappears and you

Ready

Mediaä DRM 9/10.

the start of playback and when you hear sound.

start to hear any sound.

PROTECT (NO ACCESSIBLE

DATA AVAILABLE)

All the files on the connected USB Transfer audio files not protected by Windows

portable audio player/USB memory Media DRM 9/10 to the USB portable audio

are protected by Windows Media

DRM 9/10.

ERROR-02-6X

Communication failed.

Disconnect the cable from the iPod. Once the

iPod’s main menu is displayed, reconnect the

iPod and reset it.

player/USB memory and connect.

N/A USB (INCOMPATIBLE DE- The USB device connected to is not Connect a USB portable audio player or USB

iPod failure.

Reset the iPod.

VICE)

supported by this unit.

memory that is USB Mass Storage Class

compliant.

ERROR-02-67

The iPod firmware version is old.

Update the iPod version.

N/A USB (INCOMPATIBLE DE- Non-compatible iPod

VICE)

Disconnect your device and replace it with a

compatible iPod.

The USB device is not formatted

with FAT16 or FAT32.

The connected USB device should be for-

matted with FAT16 or FAT32.

STOP

There are no songs.

Transfer songs to the iPod.

CHECK USB

The USB connector or USB cable

has short-circuited.

Check that the USB connector or USB cable

is not caught in something or damaged.

There are no songs in the current

list.

Select a list that contains songs.

The connected USB portable audio Disconnect the USB portable audio player/

player/USB memory consumes USB memory and do not use it. Turn the igni-

more than 500 mA (maximum allow- tion switch to OFF, then to ACC or ON and

NOT FOUND

No related songs.

Transfer songs to the iPod.

able current).

then connect a compliant USB portable

audio player/USB memory.

ERROR-02-DX

Communication failed.

Perform one of the following operations.

–Turn the ignition switch OFF and back ON.

–Disconnect the USB portable audio player/

USB memory.

Auto TA and EQ error messages

When correct measurement of car’s interior acoustic characteristics is not possible using auto TA

and EQ, an error message may appear on the display. In such cases, refer to the table below to

see what the problem is and how it may be corrected. After checking, try again.

–Change to a different source.

Then, return to the USB portable audio

player/USB memory.

EXPIRED (THIS DivX RENTAL

HAS EXPIRED.)

The inserted external storage device Select a file that can be played.

contains expired DivX VOD content.

Appendix

Additional Information

USB storage device

About iPod settings

Message

Cause

Action

When an iPod is connected, this unit changes the

EQ (equalizer) setting of the iPod to off in order to

optimize the acoustics. When you disconnect the

iPod, the EQ returns to the original setting.

You cannot set Repeat to off on the iPod when

using this unit. Repeat is automatically changed

to All when the iPod is connected to this unit.

ERROR-MIC

The microphone is not connected.

Plug the optional microphone securely into

the jack.

Depending on the external storage device (USB), the

following problems may occur.

Operations may vary.

The storage device may not be recognized.

Files may not be played back properly.

ERROR-FSP, ERROR-FLSP,

ERROR-FRSP, ERROR-CSP,

ERROR-RSP, ERROR-RLSP,

ERROR-RRSP, ERROR-SW

The microphone cannot pick up the ! Confirm that the speakers are connected

measuring tone of a speaker.

correctly.

! Correct the input level setting of the power

amp connected to the speakers.

! Set the microphone correctly.

USB storage device

Incompatible text saved on the iPod will not be dis-

played by the unit.

ERROR-NOIS

The surrounding noise level is too

high.

! Stop your car in a place that is quiet, and

switch off the engine, air conditioner and hea-

ter.

Connections via USB hub are not supported.

Do not connect anything other than a USB storage

device.

! Set the microphone correctly.

DVD-R/DVD-RW discs

Unfinalized DVD-R/-RW discs which have been re-

corded in the Video format (video mode) cannot be

played back.

Playback of DVD-R/DVD-RW discs may not be possi-

ble, due to disc characteristics, scratches or dirt on

the disc, or dirt, condensation, etc. on the lens of this

unit.

Firmly secure the USB storage device when driving.

Do not let the USB storage device fall onto the floor,

where it may become jammed under the brake or ac-

celerator pedal.

Handling guidelines

Discs and player

Store discs in their cases when not in use.

Depending on the USB storage device, the device

may cause noise to occur in the radio.

Do not attach labels, write on or apply chemicals to

the surface of the discs.

Depending on the application settings and the envir-

onment, playback of discs recorded on a personal

computer may not be possible. (For details, contact

the manufacturer of the application.)

Use only discs featuring any of following logos.

devices cannot be played back.

To clean a disc, wipe the disc with a soft cloth out-

ward from the center.

You cannot connect a USB portable audio player/USB

memory to this unit via USB hub.

Condensation may temporarily impair the player’s

performance. Let it rest for about one hour to adjust

to a warmer temperature. Also, wipe any damp discs

off with a soft cloth.

CD-R/CD-RW discs

Partitioned USB memory is not compatible with this

unit.

When CD-R/CD-RW discs are used, playback is possi-

ble only for discs which have been finalized.

Playback of CD-R/CD-RW discs recorded on a music

CD recorder or a personal computer may not be pos-

sible due to disc characteristics, scratches or dirt on

the disc, or dirt, condensation, etc., on the lens of this

unit.

Depending on the application settings and the envir-

onment, playback of discs recorded on a personal

computer may not be possible. (For details, contact

the manufacturer of the application.)

Playback of CD-R/CD-RW discs may become impossi-

ble in case of direct exposure to sunlight, high tem-

peratures, or the storage conditions in the vehicle.

Titles and other text information recorded on a CD-R/

CD-RW disc may not be displayed by this unit (in the

case of audio data (CD-DA)).

Depending on the kind of USB portable audio player/

USB memory you use, the device may not be recog-

nized or audio files may not be played back properly.

Playback of discs may not be possible because of

disc characteristics, disc format, recorded applica-

tion, playback environment, storage conditions, and

so on.

Do not leave the USB portable audio player/USB

memory in direct sunlight for extended amounts of

time. Doing so may cause the device to malfunction

from the extreme rise in temperature.

Road shocks may interrupt disc playback.

Read the precautions for discs before using them.

Use 12-cm discs. Do not use 8-cm discs or an adapter

for 8-cm discs.

Certain functions may not be available for some DVD

video discs.

iPod

Use only conventional, fully circular discs. Do not use

shaped discs.

It may not be possible to play back some DVD video

discs.

To ensure proper operation, connect the dock connec-

tor cable from the iPod directly to this unit.

It is not possible to play back DVD-RAM discs.

Firmly secure the iPod when driving. Do not let the

iPod fall onto the floor, where it may become jammed

under the brake or accelerator pedal.

This unit is not compatible with discs recorded in

AVCHD (Advanced Video Codec High Definition) for-

mat. Do not insert AVCHD discs as you may not be

able to eject the disc.

DualDiscs

Do not insert anything other than a DVD (-R/-RW) or

CD (-R/-RW) into the disc loading slot.

DualDiscs are two-sided discs that have a recordable

CD for audio on one side and a recordable DVD for

video on the other.

Do not use cracked, chipped, warped, or otherwise

damaged discs as they may damage the player.

Playback of the DVD side is possible with this unit.

However, since the CD side of DualDiscs is not physi-

cally compatible with the general CD standard, it may

not be possible to play the CD side with this unit.

Unfinalized CD-R/CD-RW discs cannot be played

back.

Do not touch the recorded surface of the discs.

Appendix

Additional Information

Frequent loading and ejecting of a DualDisc may re-

sult in scratches on the disc. Serious scratches can

lead to playback problems on this unit. In some

cases, a DualDisc may become stuck in the disc load-

ing slot and will not eject. To prevent this, we recom-

mend you refrain from using DualDisc with this unit.

Please refer to the information from the disc manu-

facturer for more detailed information about

DualDiscs.

Important

DivX compatibility

USB storage device

When naming a JPEG image file, add the cor-

responding filename extension (.jpg, .jpeg, .

jpe or .jfif).

This unit plays back files with these filename

extensions (.jpg, .jpeg, .jpe or .jfif) as a JPEG

image file. To prevent malfunctions, do not

use these extensions for files other than JPEG

image files.

Compatible format: DivX video format implemented in

relation to DivX standards

Playable folder hierarchy: up to eight tiers (A practical

hierarchy is less than two tiers).

File extensions: .avi or .divx

Playable folders: up to 6 000 (up to 700 for DivX)

Playable files: up to 65 535

DivX Ultra format: Not compatible

DivX HD format: Not compatible

Playback of copyright-protected files: Not compatible

DivX files without video data: Not compatible

Compatible audio codec: MP2, MP3, Dolby Digital

LPCM: Not compatible

Partitioned external storage device (USB): Only the

first playable partition can be played.

JPEG picture files

JPEG is short for Joint Photographic Experts Group

and refers to a still image compression technology

standard.

Compressed audio and DivX

compatibility (disc, USB)

WMA

CAUTION

Bit rate: 8 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz

Compatible external subtitle file extension: .srt

DivX plus HD format: Not compatible

Pioneer accepts no responsibility for data lost

on the USB memory/USB portable audio

player even if that data is lost while using this

unit.

Do not leave the discs/external storage device

(USB) or iPod in places with high

temperatures.

Files are compatible with Baseline JPEG and EXIF 2.1

still images up to a resolution of 8 192 × 7 680. (EXIF

format is used most commonly with digital still cam-

eras.)

File extension: .wma

Playback of EXIF format files that were processed by a

personal computer may not be possible.

Bit rate: 5 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz

Supplemental information

There is no progressive JPEG compatibility.

Only the first 32 characters can be displayed as a file

name (including the file extension) or a folder name.

Windows Media Audio Professional, Lossless, Voice/

DRM Stream/Stream with video: Not compatible

DivX video files

This unit may not operate correctly depending on the

application used to encode WMA files.

iPod compatibility

Depending on the composition of the file information,

such as the number of audio streams or file size,

there may be a slight delay when playing back discs.

MP3

This unit supports only the following iPod models.

Supported iPod software versions are shown below.

Older versions may not be supported.

There may be a slight delay at the start of playback of

audio files embedded with image data or audio files

stored on a USB storage device that has numerous

folder hierarchies.

File extension: .mp3

Some special operations may be prohibited due to

the composition of the DivX files.

Bit rate: 8 kbps to 320 kbps (CBR), VBR

iPhone 4 (software version 4.0.1)

iPhone 3GS (software version 4.0.1)

iPhone 3G (software version 4.0.1)

Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz,

48 kHz for emphasis)

Only DivX files downloaded from a DivX partner site

are guarantee for proper operation. Unauthorized

DivX files may not operate properly.

iPod nano 6th generation (software version 1.0)

iPod nano 5th generation (software version 1.0.1)

iPod nano 4th generation (software version 1.0.4)

iPod nano 3rd generation (software version 1.1.3)

iPod nano 2nd generation (software version 1.1.3)

iPod nano 1st generation (software version 1.3.1)

iPod touch 4th generation (software version 4.1)

iPod touch 3rd generation (software version 3.1.2)

iPod touch 2nd generation (software version 3.1.3)

iPod touch 1st generation (software version 2.2.1)

iPod classic 160GB (software version 2.0.4)

iPod classic 120GB (software version 2.0.1)

iPod classic (software version 1.1.2)

Disc

Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3 (ID3 tag

Version 2.x is given priority than Version 1.x.)

Playable folder hierarchy: up to eight tiers (A practical

hierarchy is less than two tiers).

DRM rental files cannot be operated until playback is

started.

M3u playlist: Not compatible

Playable folders: up to 700

MP3i (MP3 interactive), mp3 PRO: Not compatible

This unit corresponds to a DivX file display of up to

1 590 minutes 43 seconds. Search operation beyond

this time limit is prohibited.

Playable files: up to 999 for CD-R/CD-RW

Playable files: up to 3 500 for DVD-R/DVD-RW

AAC

File system: ISO 9660 Level 1 and 2, Romeo, Joliet,

UDF 1.02, 1.50, 2.00, 2.01, 2.50 (CD-R/DVD-R)

Recommended file size: 2 Mbps or less with a trans-

mission rate of 2 GB or less.

Compatible format: AAC encoded by iTunes

File extension: .m4a

Multi-session playback: Compatible

The ID code of this unit must be registered to a DivX

VOD provider in order to playback DivX VOD files. For

information on ID codes, refer to Displaying the DivX^â

VOD registration code on page 28.

Packet write data transfer: Not compatible

Sampling frequency: 8 kHz to 44.1 kHz

Bit rate: 8 kbps to 320 kbps

iPod 5th generation (software version 1.3)

Regardless of the length of blank sections between

the songs from the original recording, compressed

audio discs play with a short pause between songs.

Depending on the generation or version of the iPod,

some functions may not be available.

For more details about DivX, visit the following site:

http://www.divx.com/

Apple Lossless: Not compatible

Operations may vary depending on the software ver-

sion of iPod.

AAC file bought from the iTunes Store (.m4p file ex-

tension): Not compatible

Appendix

Additional Information

3 Save the folder containing files on the USB

storage device.

However, depending on the system environ-

ment, you may not be able to specify the play-

back sequence.

This product includes technology owned by

Microsoft Corporation and cannot be used or

distributed without a license from Microsoft

Licensing, Inc.

When using an iPod, an iPod Dock Connector to USB

Cable is required.

When you use Pioneer CD-IU50/CD-IU50V interface

cable, consult your dealer for details.

About the file/format compatibility, refer to the iPod

manuals.

iPod & iPhone

For USB portable audio players, the sequence

is different and depends on the player.

iPhone, iPod, iPod classic, iPod nano, and

iPod touch are trademarks of Apple Inc., regis-

tered in the U.S. and other countries.

“Made for iPod” and “Made for iPhone” mean

that an electronic accessory has been de-

signed to connect specifically to iPod or

iPhone, respectively, and has been certified by

the developer to meet Apple performance

standards.

Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

Please note that the use of this accessory with

iPod or iPhone may affect wireless perfor-

mance.

Audio Book, Podcast: Compatible

CAUTION

Pioneer accepts no responsibility for data lost on

the iPod, even if that data is lost while this unit is

used.

This item incorporates copy protection tech-

nology that is protected by U.S. patents and

other intellectual property rights of Rovi

Corporation. Reverse engineering and disas-

sembly are prohibited.

Sequence of audio files

The user cannot assign folder numbers and

specify playback sequences with this unit.

DVD video

is a trademark of DVD Format/Logo

Licensing Corporation.

Example of a hierarchy

iTunes

ꢀ

ꢁ

Apple and iTunes are trademarks of Apple

Inc., registered in the U.S. and other coun-

tries.

Dolby Pro Logic II

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and the

double-D symbol are trademarks of Dolby

Laboratories.

: Folder

: Compressed

audio file

MP3

ꢂ

ꢃ

Supply of this product only conveys a license

for private, non-commercial use and does not

convey a license nor imply any right to use

this product in any commercial (i.e. revenue-

generating) real time broadcasting (terrestrial,

satellite, cable and/or any other media), broad-

casting/streaming via internet, intranets and/

or other networks or in other electronic con-

tent distribution systems, such as pay-audio or

audio-on-demand applications. An indepen-

dent license for such use is required. For de-

tails, please visit

ꢄ

ꢅ

01 to 05: Folder

number

DivX

DivX^â, DivX Certified^âand associated logos

are trademarks of DivX, Inc. and are used

under license.

1 to 6: Playback

sequence

Level 1 Level 2 Level 3 Level 4

ABOUT DIVX VIDEO: DivX^âis a digital

video format created by DivX, Inc. This is an of-

ficial DivX Certified^âdevice that plays DivX

video. Visit divx.com for more information and

software tools to convert your files into DivX

video.

Disc

Folder selection sequence or other operation

may differ depending on the encoding or writ-

ing software.

USB storage device

Playback sequence is the same as recorded

sequence in the USB storage device.

To specify the playback sequence, the follow-

ing method is recommended.

1 Create a file name that includes numbers that

specify the playback sequence (e.g., 001xxx.

mp3 and 009yyy.mp3).

ABOUT DIVX VIDEO-ON-DEMAND: This

DivX Certified^âdevice must be registered in

order to play purchased DivX Video-on-De-

mand (VOD) movies. To obtain your registra-

tion code, locate the DivX VOD section in

Displaying the DivX^âVOD registration code. Go

to vod.divx.com for more information on how

to complete your registration.

http://www.mp3licensing.com.

WMA

Windows Media is either a registered trade-

mark or trademark of Microsoft Corporation in

the United States and/or other countries.

2 Put those files into a folder.

Appendix

Additional Information

Specifications

WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12

(2 ch audio)

Language code chart for DVD

(Windows Media Player)

AAC decoding format ............ MPEG-4 AAC (iTunes en-

coded only) (.m4a)

(Ver. 9.0.3 and earlier)

DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,

6 (.avi, .divx)

General

Language (code), input code

Rated power source ............... 14.4 V DC

(allowable voltage range:

12.0 V to 14.4 V DC)

Japanese (ja), 1001

English (en), 0514

French (fr), 0618

Spanish (es), 0519

German (de), 0405

Italian (it), 0920

Chinese (zh), 2608

Dutch, Flemish (nl), 1412

Portuguese (pt), 1620

Swedish (sv), 1922

Russian (ru), 1821

Korean (ko), 1115

Greek (el), 0512

Dzongkha (dz), 0426

Ewe (ee), 0505

Kurdish (ku), 1121

Komi (kv), 1122

Cornish (kw), 1123

Kirghiz, Kyrgyz (ky), 1125

Latin (la), 1201

Luxembourgish (lb), 1202

Ganda (lg), 1207

Limburgan (li), 1209

Lingala (ln), 1214

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sardinian (sc), 1903

Sindhi (sd), 1904

Northern Sami (se), 1905

Sangho (sg), 1907

Sinhala (si), 1909

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Somali (so), 1915

Albanian (sq), 1917

Serbian (sr), 1918

Swati (ss), 1919

Esperanto (eo), 0515

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Fulah (ff), 0606

Finnish (fi), 0609

Fijian (fj), 0610

Faroese (fo), 0615

Western Frisian (fy), 0625

Irish (ga), 0701

Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Manx (gv), 0722

Hausa (ha), 0801

Hebrew (he), 0805

Hindi (hi), 0809

Hiri Motu (ho), 0815

Croatian (hr), 0818

Haitian (ht), 0820

Hungarian (hu), 0821

Armenian (hy), 0825

Herero (hz), 0826

Interlingua (ia), 0901

Indonesian (id), 0904

Interlingue (ie), 0905

Igbo (ig), 0907

Grounding system ................... Negative type

Maximum current consumption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

USB

USB standard specification

..................................................... USB 2.0 full speed

Maximum current supply .... 500 mA

USB Class ................................... MSC (Mass Storage Class)

File system .................................. FAT16, FAT32

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12

(2 ch audio)

(Windows Media Player)

AAC decoding format ............ MPEG-4 AAC (iTunes en-

coded only) (.m4a)

Chassis ..................... 178 mm × 50 mm ×

163 mm

Nose ........................... 188 mm × 58 mm × 23 mm

Lao (lo), 1215

Lithuanian (lt), 1220

Luba-Katanga (lu), 1221

Latvian (lv), 1222

Malagasy (mg), 1307

Marshallese (mh), 1308

Maori (mi), 1309

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Marathi (mr), 1318

Malay (ms), 1319

Maltese (mt), 1320

Burmese (my), 1325

Nauru (na), 1401

Bokmal (nb), 1402

Ndebele, North (nd), 1404

Nepali (ne), 1405

Ndonga (ng), 1407

Nynorsk (nn), 1414

Norwegian (no), 1415

Ndebele, South (nr), 1418

Chassis ..................... 178 mm × 50 mm ×

163 mm

Nose ........................... 170 mm × 46 mm × 23 mm

Weight .......................................... 1.4 kg

Afar (aa), 0101

Abkhazian (ab), 0102

Avestan (ae), 0105

Afrikaans (af), 0106

Akan (ak), 0111

Amharic (am), 0113

Aragonese (an), 0114

Arabic (ar), 0118

Sotho, Southern (st), 1920

Sundanese (su), 1921

Swahili (sw), 1923

Tamil (ta), 2001

Telugu (te), 2005

Tajik (tg), 2007

Audio

(Ver. 9.0.3 and earlier)

DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,

6 (.avi, .divx)

Maximum power output ....... 50 W × 4

Continuous power output ... 22 W × 4 (50 Hz to

15 000 Hz, 5 % THD,

4 W load, both channels dri-

ven)

Assamese (as), 0119

Avaric (av), 0122

Thai (th), 2008

FM tuner

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Tswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Frequency range ...................... 87.5 MHz to 108.0 MHz

Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,

S/N: 30 dB)

Load impedance ...................... 4 W (4 W to 8 W allowable)

Preout maximum output level

..................................................... 2.0 V

Tone controls:

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Belarusian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Bislama (bi), 0209

Bambara (bm), 0213

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Signal-to-noise ratio ............... 72 dB (IEC-A network)

Bass

AM tuner

Frequency ................ 100 Hz

Gain ............................ 12 dB

Mid

Frequency ................ 1 kHz

Gain ............................ 12 dB

Treble

Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)

530 kHz to 1 640 kHz

Sichuan Yi (ii), 0909

Inupiaq (ik), 0911

Ido (io), 0915

Icelandic (is), 0919

Inuktitut (iu), 0921

Javanese (jv), 1022

Georgian (ka), 1101

Kongo (kg), 1107

Twi (tw), 2023

(10 kHz)

Navajo, Navaho (nv), 1422 Tahitian (ty), 2025

Usable sensitivity ..................... 25 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 62 dB (IEC-A network)

Chichewa (ny), 1425

Occitan (oc), 1503

Ojibwa (oj), 1510

Oromo (om), 1513

Oriya (or), 1518

Ossetian (os), 1519

Panjabi, Punjabi (pa),

1601

Uighur, Uyghur (ug), 2107

Ukrainian (uk), 2111

Urdu (ur), 2118

Uzbek (uz), 2126

Venda (ve), 2205

Vietnamese (vi), 2209

Bosnian (bs), 0219

Catalan (ca), 0301

Chechen (ce), 0305

Chamorro (ch), 0308

Frequency ................ 10 kHz

Gain ............................ 12 dB

Note

Specifications and the design are subject to mod-

ifications without notice.

DVD Player

System .......................................... DVD video, Video CD, CD,

WMA, MP3, AAC, DivX,

Corsican (co), 0315

Kikuyu, Gikuyu (ki), 1109

Volapük (vo), 2215

Cree (cr), 0318

Czech (cs), 0319

Church Slavic (cu), 0321

Chuvash (cv), 0322

Welsh (cy), 0325

Kuanyama (kj), 1110

Kazakh (kk), 1111

Kalaallisut (kl), 1112

Central Khmer (km), 1113

Kannada (kn), 1114

Pali (pi), 1609

Walloon (wa), 2301

Wolof (wo), 2315

Xhosa (xh), 2408

Yiddish (yi), 2509

Yoruba (yo), 2515

Zhuang, Chuang (za),

2601

JPEG system

Region number ........................ 5

Usable discs .............................. DVD video, Video CD, CD,

CD-R/RW, DVD-R/RW/R DL

Frequency response ............... 5 Hz to 44 000 Hz (with DVD,

at sampling frequency

Polish (pl), 1612

Pashto, Pushto (ps), 1619

Quechua (qu), 1721

Romansh (rm), 1813

Danish (da), 0401

Kanuri (kr), 1118

Rundi (rn), 1814

96 kHz)

Divehi (dv), 0422

Kashmiri (ks), 1119

Romanian (ro), 1815

Zulu (zu), 2621

Signal-to-noise ratio ............... 96 dB (1 kHz) (IEC-A net-

work) (RCA level)

Number of channels .............. 2 (stereo)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,

Kanagawa 212-0031, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

5 Arco Lane, Heatherton, Victoria, 3202 Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada

TEL: 1-877-283-5901

TEL: 905-479-4411

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

先鋒股份有限公司

台北市內湖區瑞光路407號8樓

電話： (02) 2657-3588

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心

9樓901-6室

Published by Pioneer Corporation.

電話： (0852) 2848-6488

Printed in Thailand

<QRB3172-A/N> ID

Philips BDP2985 User Manual
Panasonic AJ HPX2700 User Manual
Motorola MOTOROKR S7 HD User Manual
Milwaukee 9560 User Manual
Miller Camera Support Projib 711 User Manual
Lowepro QC 5340 User Manual
Lanzar Car Audio HERITAGE HTG 434 User Manual
Konica Minolta MAXXUM 5D User Manual
Kenwood TS 570S TS 570D User Manual
JVC Model KD S580J User Manual