Register your product and get support at
BDP7700
User manual
1 Hookup and play
Before you connect this Blu-ray disc/ DVD player, read and understand all accompanying instructions.
This product incorporates proprietary technology under license fromVerance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
ofVerance Corporation. Copyright 2004-2010Verance Corporation.All rights reserved byVerance.
Reverse engineering or disassembly is prohibited.
Cinavia Notice
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-
produced film and videos and their soundtracks.When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
2
Register your
and get support at
www.pphroidliupcts.com/welcome
BDP7700
BDP7700
PC
&
Mac
EN User manual
1
(
)
HDMI
COAXIAL OPTICAL
2CH
5.1CH
7.1CH
3
OPTICAL
HDMI
COAXIAL
5.1 CH
5.1CH
7.1 CH
H
UR
UN
5.1CH
5
6
2
BD/BD 3D
1
DVD/VCD/CD
DivX Plus HD/MKV
MP3 / JPEG
3
4
USB
1
2
3
7
During play, press the following buttons to
control.
2 Use your Blu-
ray disc/ DVD
player
Congratulations on your purchase, and
welcome to Philips!To fully benefit from
the support that Philips offers (e.g. product
software upgrade), register your product at
Button
Action
Turn on the player, or switch to
standby.
Access the home menu.
Stop play.
/
Press and hold (more than 4
seconds) to open or close the
disc compartment.
Pause play.
Press repeatedly to slow forward
frame by frame.
Start or resume play.
Skip to the previous or next track,
chapter or file.
Fast backward or forward.
Press repeatedly to change the
search speed.
Basic play control
/
/
Press once, and then press
to slow forward.
AUDIO
Select an audio language or
channel.
SUBTITLE Select a subtitle language.
DISC
Access or exit the disc menu.
MENU /
POP-UP
MENU
TOP
Access the main menu of a video
MENU
disc.
Color
buttons
Select tasks or options for Blu-ray
discs.
Navigate the menus.
Press
to rotate a picture
clockwise or counter-clockwise
during slideshow.
OK
Confirm a selection or entry.
Return to a previous display menu.
Access more options during play.
10 EN
•
[Zoom]: Zoom into a video picture. Press
to select a zoom factor.
[Repeat]: Repeat a chapter or title.
[Repeat A-B]: Mark two points within a
chapter for repeat play, or turn off repeat
mode.
[2D to 3D]: Convert instantly a 2D video
to be viewed in 3D effect.
[Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
Video, audio and picture
options
•
•
More options are available for video or picture
play from a disc or USB storage device.
•
•
Video options
•
[Audio sync]: Synchronize audio with
video.
2
3
Note
• Available video options depend on the video source.
1
Picture options
Access more options during video play.
•
•
[Audio language]: Select an audio language.
[Subtitle Language]: Select a subtitle
language.
•
[Subtitle shift]: Change the subtitle
position on the screen. Press
change the subtitle position.
[Info]: Display play information.
[Character set]: Select a character set that
supports the DivX video subtitle (only for
DivX videos).
[Time search]: Skip to a specific time
via the numeric buttons on the remote
control.
[2nd audio language]: Select the second
audio language (only for Blu-ray discs that
support BonusView).
[2nd Subtitle Language]: Select the second
subtitle language (only for Blu-ray discs that
support BonusView).
[Titles]: Select a title.
[Chapters]: Select a chapter.
to
2
3
•
•
1
•
•
•
Access more options during slideshow.
•
•
•
[Rotate +90]: Rotate a picture 90 degrees
clockwise.
[Rotate -90]: Rotate a picture 90 degrees
counter-clockwise.
[Zoom]: Zoom into a picture. Press
select a zoom factor.
to
•
•
[Info]: Display picture information.
[Duration per slide]: Set a display interval
for a slideshow.
[Slide animation]: Select a transition effect
for a slideshow.
[Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
•
•
•
•
•
[Angle list]: Select a camera angle.
[Menus]: Display a disc menu.
[PIP selection]: Display a picture-in-picture
window (only for Blu-ray discs that support
BonusView).
•
•
EN 11
•
•
[Repeat]: Repeat a selected folder.
[2D to 3D]: Convert instantly a 2D picture
to be viewed in 3D effect.
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene,
and Serbian
[Cyrillic]
Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian, and Ukrainian
Greek
Audio options
[Greek]
[Baltic]
Northern Europe
Note
Press
repeatedly to cycle through the
following options.
• To play DivX DRM protected files from a USB storage
device, or an online video store, connect this player to a
TV through HDMI.
• To use the subtitles, make sure that the subtitle file
has the same name as the DivX video file name. For
example, if the DivX video file is named “movie.avi",
save the subtitle file as “movie.srt”, or “movie.sub”.
• This player can play subtitle files in the following
formats: .srt, .sub, .txt, .ssa, and .smi.
•
•
•
•
Repeat the current track.
Repeat all the tracks on the disc or folder.
Play audio tracks in a random loop.
Turn off a repeat mode.
DivX videos
You can play DivX videos from a disc, a USB
storage device, or an online video store (see
"Rent online videos).
Synchronize audio with video
VOD code for DivX
You can adjust the audio delay time when video
is out of sync with audio.
•
Before you purchase DivX videos and play
them on this player, register this player on
Display the DivXVOD code: press , and
select [Setup] > [Advanced] > [DivX®
VOD Code].
1 Make sure that this player is connected to
yourTV through HDMI.
•
2 During play, press
.
» The options menu is displayed.
3 Select [Audio sync].
DivX subtitles
•
•
Press SUBTITLE to select a language.
4 Press
to select a value until audio is in
If the subtitle is not displayed correctly,
change the character set that supports the
DivX subtitle. Select a character set: press
, and select [Character set].
sync with video.
Play a musical slideshow
Character
set
[Standard]
Languages
Play music and pictures simultaneously to create
a musical slideshow.
English,Albanian, Danish,
1 From a disc or connected USB storage
Dutch, Finnish, French, Gaelic,
German, Italian, Kurdish (Latin),
Norwegian, Portuguese, Spanish,
Swedish, andTurkish
device, play a music file.
2 Press , and go to the picture folder.
12 EN
3 Select a picture from the same disc or
•
To delete the BD-Live previously
downloaded on the USB storage
device or SD card for memory
release, press , and select [Setup] >
[Advanced] > [Clear memory].
USB, and press OK to start slideshow.
4 Press to stop slideshow.
5 Press again to stop music play.
4 Play a disc that is BD-Live enabled.
5 On the disc menu, select the BD-Live icon,
BonusView on Blu-ray
and press OK.
» BD-Live starts to load.The loading
time depends on the disc and the
Internet connection.
View special content (such as commentaries) in
a small screen window.
This feature is only applicable to Blu-ray discs
compatible with BonusView (also known as
picture in picture).
6 On the BD-Live interface, select an item
to access.
1 During play, press
.
» The options menu is displayed.
Note
2 Select [PIP selection] > [PIP], and press
OK.
• BD-Live services vary from discs and countries.
• When you use BD-Live, data on the disc and this player
are accessed by the content provider
• Use a USB storage device or SD card with at least 1GB
of free space to store the download.
» PIP options [1]/[2] depend on the
video contents.
» The secondary video window is
displayed.
3 Select [2nd audio language] or [2nd
Subtitle Language], and press OK.
Play a Blu-ray 3D video
What you need
•
•
A 3D compliantTV
This player is connected to theTV through
HDMI
BD-Live on Blu-ray
Access exclusive online services, such as movie
trailers, games, ringtones, and other bonus
contents.
This feature is only applicable to Blu-ray discs
that are BD-Live enabled.
•
3D glasses compatible with theTV
1 Make sure that 3D output is turned on:
press , and select [Setup] > [Video]
>[Watch 3D video] > [Auto].
1 Prepare the Internet connection and set
2 Play a Blu-ray 3D video.
up a network (see "Set up a network").
3 Put on the 3D glasses for 3D effects.
2 Connect a USB storage device or SD card
•
To play 3D video in 2D, turn off Blu-ray
3D output (press , and select [Setup]
> [Video] > [Watch 3D video] >
[Off]).
to this player.
•
A USB storage device or SD card is
used to store the downloaded BD-Live
content.
3 Select a USB storage device or SD card
to store: press , and select [Setup] >
[Advanced] > [Local storage].
EN 13
View 2D video/picure in 3D
effect
PC (DLNA)
You can convert 2D videos or pictures to be
viewed in 3D effect.
What you need
•
•
A 3D compliantTV
This player is connected to theTV through
HDMI
•
3D glasses compatible with theTV
1 Play 2D video or pictures on this player.
•
This player has a built-in Wi-Fi for a
wireless connection.
2 Press
.
» The options menu is displayed.
3 Select [2D to 3D] > [On].
» 2D video or pictures are converted to
3D effect.
PC (DLNA)
4 Put on the 3D glasses for 3D effects.
Set up a network
Connect this player to a computer network and
the Internet to access the services:
•
Browse PC (DLNA): play photos, music,
and video files streamed from your
computer.
2 Perform the network installation.
1) Press
2) Select [Setup], and press OK.
3) Select [Network] > [Network
installation], and press OK.
•
•
•
Browse SmartTV: access online services,
such as pictures, music and video stores.
Update software: update the software of
this player via the Internet.
BD-Live: access online bonus features
(applicable to Blu-ray discs that are BD-
Live enabled).
.
4) Follow the instructions on theTV screen to
complete the installation.
1 Connect this player to a computer
network and the Internet, through wired
(Ethernet) or wireless connection.
Caution
• Before you connect to a network, familiarize yourself
with the network router, media server software for
DLNA, and networking principles. If necessary, read
documentation accompanying network components.
Philips is not responsible for lost, damaged, or corrupt
data.
•
For wired connection, connect a
network cable (not supplied) to the
LAN port on the back panel of this
player.
14 EN
•
To access the remote control, return
to the previous smartphone screen,
and then tap the Remote (Remote)
tab. Only the relevant control buttons
are enabled.
Smartphone control
Use a smartphone to browse, control and play
media files from this player.
6 Tap the control buttons on the
What you need
smartphone to control play.
•
An iPhone (iOS 3.1.3 and above) or
Android based device (Android 2.1 and
above)
•
To access more control buttons, swipe
the screen to the left or right.
•
To exit the application, press the home
button on the smartphone.
•
On your smartphone, download Philips
MyRemote application
•
For iPhone, search for the application
in App Store
•
For Android based device, search for
the application in Android Market
Browse PC through DLNA
Through this player, you can stream and play
video, music and photo from a computer on
yourTV.
Before you start
•
Connect this player to a home network
(see "Set up a network").
•
Connect your smartphone to the same
home network (see the user manual of the
smartphone for details).
Before you start
•
On your PC, install a DLNA-compliant
media server application (such as Windows
Media Player 11 or higher)
•
Turn on this player
•
On your PC, enable media sharing and file
sharing (see the "Help" document in the
media server application)
Control your player
Use a smartphone to browse, control and play
media files from this player.
1 Connect this player and your PC in the
same home network (see "Set up a
network").
1 Insert a data disc or USB storage device
into this player.
•
For better video quality, use wired
network connection whenever
possible.
2 On your smartphone, tap the MyRemote
icon from the home screen.
» The name of this player is displayed on
the smartphone.
2 Press
.
» The home menu is displayed on the
TV screen.
3 Select this player from the smartphone
screen.
3 Select [browse PC], and press OK.
» The smartphone used as a virtual
remote control is enabled.
» A content browser is displayed.
4 Select a file, and press OK to play.
4 On the smartphone, tap the Media
(Media) tab, and then select the disc or
USB source.
•
Use the remote control to control play.
» The folders in the data disc or USB
storage device are displayed.
Browse SmartTV
5 Open a folder, and select a file to play.
You can access variety of Internet applications
and specially adapted Internet websites.
EN 15
•
•
An HDMI connection between this player
and theTV.
An SD memory card of type SDHC Class
6, with at least 8 GB memory.
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by SmartTV service
providers.
Note
1 Connect this player to the Internet (see
• Use a blank SD card. Formatting a SD card erases any
content on the SD card.
"Set up a network").
2 Press
.
• This service is country dependent.
» The home menu is displayed on the
TV screen.
1 Connect this player to the Internet (see
3 Select [SmartTV], and press OK.
"Set up a network").
4 Follow the onscreen instructions to
2 Insert a blank SD card into the SD CARD
connector located on the rear panel of this
player.
confirm the onscreen message.
5 Use the remote control to navigate and
select an Internet application.
3 Press
.
4 Select [SmartTV]> Video stores.
Button
Action
Navigate and select an a
service or item.
Confirm a selection.
Return to a previous page, or
delete input text.
Access options related to a
current activity.
5 Select a video store, and follow the
onscreen instructions to rent and watch a
video.
OK
» The video is downloaded to the SD
card.You can watch it now or at any
time within the rental period.
» For the downloaded video on the SD
card, you can watch it only on this
player.
Alphanumeric Input text (such as an email
buttons
address, web URL and
password).
6 Use the remote control to play and
control the video.
TOP MENU
Return to the SmartTV home
screen.
To remove the passwords and cookies from
this player, see the section: Change settings >
Network (installation, SmartTV...).
Skype
Use Skype to make video calls or voice calls
with your friends over the Internet.
What you need
Rent online videos
•
A high-speed Internet connection to this
player.
Rent videos from online stores through this
player.
•
A dedicated Skype camera (not supplied):
me/philips.
What you need
1 Connect this player to the Internet (see
•
A high-speed Internet connection to this
player.
“Set up a network”).
16 EN
2 Connect the Skype camera to the USB
Use a USB keyboard or
mouse
connector at the rear panel of this player.
•
If your connect more peripheral USB
devices, connect a USB hub to this
player to make multiple USB ports
available.
For convenience of Internet usage, you can
connect a USB keyboard and/or mouse to type
text and navigate pages on the Internet.
3 Press
.
» The home menu is displayed on the
1 Connect a USB keyboard or mouse to the
USB connector at the rear panel of this
player.
TV screen.
4 Select [Video call], and press OK.
•
If you connect more peripheral USB
devices, connect a USB hub to this
player to make multiple USB ports
available.
5 Log in your Skype account.
•
If you do not have a Skype account,
follow the onscreen instructions to
create it.
•
You also can connect a wireless USB
keyboard or mouse (see the user
manual of the wireless device for
details).
•
To enter your Skype name and
password, follow the onscreen
instructions.
6 Use the remote control to select onscreen
2 Use the keyboard to type text, or the
options (such as an audio or video call).
mouse to navigate web pages.
•
To change a language for the keyboard,
press , and select [Setup] >
[Preference] > [Keyboard layout].
Button Action
Navigate and select an a service or
item.
OK
Confirm a selection.
Delete input text, or return to a
previous page.
Access options related to a current
activity.
Note
• If a USB hub is used with this player, do not overload
the USB hub with many USB devices to avoid
insufficient USB power.
Note
• No emergency calls with Skype. Skype is not a
replacement for your telephone and cannot be used for
emergency calling.
• Use of a wireless network connection may cause
degradation of image and audio quality.
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol.You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1 Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on theTV and other
connected devices (see the user manual of
theTV or other devices for details).
EN 17
2 Press
.
3 Select [Setup]> [EasyLink].
4 Select [On] under the options: [EasyLink],
[OneTouch Play] and [OneTouch
Standby].
» EasyLink function is turned on.
OneTouch Play
When you play a disc on this player, theTV
automatically switches to the correct video
input source.
OneTouch Standby
When a connected device (for exampleTV)
is put to standby with its own remote control,
this player is put to standby automatically.
Stream media from an
Android device
With Philips SimplyShare, through this player
you can stream media files from an Android
based device on yourTV. For details, visit www.
philips.com/support
18 EN
•
•
[User]: Select a personalized picture
setting.This option is activated only
when [User] under [Picture settings]
is selected.
[Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
3 Change settings
This section helps you change the settings of
this player.
1
2
Note
• If you change a setting, make sure that theTV supports
the new setting.
• For settings related to HDMI, theTV must be
connected through HDMI.
• For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
3
Sound
Note
1 Press
.
• You cannot change a menu option that is grayed out.
2 Select [Setup] > [Audio] to access the
• To return to the previous menu, press .To exit the
menu, press
.
audio setup options.
•
[Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Picture
•
•
•
[Neo 6]: Enable or disable a surround
sound effect which is converted from
2.0 channel audio.
[HDMI Audio]: Set an HDMI audio
format when this player is connected
through HDMI.
[Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (COAXIAL or OPTICAL).
[PCM Downsampling]: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (COAXIAL or
OPTICAL).
1 Press
.
2 Select [Setup] > [Video] to access the
video setup options.
•
•
•
[TV display]: Select a picture display
format to fit theTV screen.
[HDMI video]: Select an HDMI video
resolution.
[HDMI Deep Color]: Display colors
with more shades and hues when the
video content is recorded in Deep
Color and theTV supports this feature.
[Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
•
•
EN 19
•
•
[Channels]: Select 7.1 channel sound,
or 2 channel / 5.1 channel sound
according to multichannel connection.
[Speaker setup]: Set the volume level
and distance of each speaker to obtain
the best possible surround sound.
•
•
•
•
•
[Keyboard layout]: Select a language
for a connected keyboard.
[Audio]: Select an audio language for
video.
[Subtitle]: Select a subtitle language for
video.
[Disc menu]: Select a menu language
for a video disc.
[Parental control]: Restrict access to
discs that are encoded with ratings.
Input "0000" to access the restriction
options.To play all discs irrespective of
the rating, select level "8".
Note
• For settings related to HDMI, theTV must be
connected through HDMI.
• Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
•
•
•
[Screen saver]: Enable or disable
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
[Auto subtitle shift]: Enable or disable
subtitle shift. If enabled, the subtitle
position is changed automatically to fit
theTV screen (this feature works with
some PhilipsTVs only).
[Change password]: Set or change
a password to play a restricted disc.
Input "0000" if you do not have a
password or if you have forgotten your
password.
[Display panel]: Change the brightness
of the display panel of the player.
[Auto standby]: Enable or disable
auto standby. If enabled, the player
switches to standby after 30 minutes
of inactivity (for example, in pause or
stop mode).
Network (installation, Smart
TV...)
1 Press
.
2 Select [Setup] > [Network] to access the
network setup options.
•
[Network installation]: Start a wired
or wireless installation to make the
network work.
•
•
•
[View network settings]: Display the
current network status.
[View wireless settings]: Display the
current Wi-Fi status.
[Clear SmartTV Memory]: Clear the
history of SmartTV browser (such as
cookies).
•
•
•
[Name your Product:]: Re-name this
player for identification in a home
network.
•
•
[Fast wake up]: Enable or disable the
player to wake up faster from standby.
If fast wakeup is turned off, less power
is consumed during standby.
[VCD PBC]: Display or skip the
content menu forVCD and SVCD.
Preference (languages,
parental control...)
1 Press
.
2 Select [Setup] > [Preference] to access
the preference setup options.
•
[Menu language]: Select an onscreen
display menu language.
20 EN
Note
Note
• If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
• If you select a language which is not available on a disc,
this player uses the default language of the disc.
• You cannot restrict Internet access on commercial
Blu-ray discs.
• Before you purchase DivX videos and play them on this
DivXVOD code.
Advanced options (clear
memory...)
1 Press
.
2 Select [Setup] > [Advanced] to access the
advanced setup options.
•
[BD-Live security]: Restrict or allow
access to BD-Live (only for non-
commercial, user-created BD-Live
discs).
•
•
[Downmix mode]: Control 2-channel
stereo audio output.
[Software update]: Select to update
software from a network or from USB
storage device.
•
[Clear memory]: Delete the previous
BD-Live download on the USB storage
device or SD card.A "BUDA" folder is
automatically created to store the BD-
Live download.
•
•
[Local storage]: Select a USB storage
device or SD card to store the
downloaded BD-Live files.
[DivX® VOD Code]: Display the
DivX® registration code or the
deregistration code for this player.
[Version information]: Display the
software version of this player.
[Restore default settings]: Reset this
player to the default settings made at
the factory, except for password and
parental control level.
•
•
EN 21
3 Connect the USB storage device to the
4 Update software
(USB) connector on this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]>
Before you update the software of this player,
check the current software version:
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
•
Press , and then select [Setup] >
[Advanced] > [Version information], and
press OK.
6 Follow the instructions on theTV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Update software via the
Internet
Caution
1 Connect the player to the Internet (see
"Set up a network").
• Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
2 Press , and select [Setup].
3 Select [Advanced] > [Software update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4 Follow the instructions on theTV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1 Check the latest software version on www.
philips.com/support.
•
Search for your model and click on
"Software and drivers".
2 Download the software into a USB storage
device.
a Unzip the download, and make sure
that the unzipped folder is named
"UPG_ALL".
b Put the "UPG_ALL" folder in the root
directory.
22 EN
•
Audio Surrond L + R : 2Vrms (> 1
kohm)
Audio Center : 2Vrms (> 1 kohm)
Audio Subwoofer : 1.15Vrms (> 1
kohm)
5 Specifications
•
•
Note
•
Audio Rear L + R: 2Vrms (> 1 kohm)
• Specifications are subject to change without notice
•
Digital output: 0.5Vp-p (75 ohm)
Optical, Coaxial
•
Region code
This player can play discs with the following
region codes.
•
•
HDMI output
Sampling frequency:
•
•
Constant bit rate:
•
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
DVD
Blu-ray
Countries
Europe,
United
•
MP3: 112 kbps - 320 kpbs
WMA: 48 kpbs - 192 kpbs
B
Kingdom
USB
•
•
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
File system: FAT16, FAT32
USB port: 5V , 500mA (for each port)
Support HDD (a portable hard disc drive):
an external power source may be needed.
Playable media
•
•
BD-Video, BD 3D
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
VCD/SVCD
Audio CD, CD-R/CD-RW, MP3 media,
WMA media, JPEG files
•
•
•
Main unit
•
•
•
Power supply rating:AC 220-240V~, 50 Hz
•
•
DivX (Ultra)/DivX Plus HD media, MKV
media
USB storage device
Power consumption: 20 W
Power consumption in standby mode (fast
wakeup disabled): < 0.15 W
Dimensions (w x h x d): 435 x 42 x 230
(mm)
File container
•
•
•
Video: .avi, .divx, .mp4/m4v, .mkv, .asf/wmv,
.mpg/mpeg, .m2ts
Net Weight: 1.51 kg
•
•
Audio: .aac/m4a, .mp3, .wma, .mka
Picture: .jpg, .gif, .png
Accessories supplied
•
•
•
•
Remote control and batteries
AC power cable
User manual
CD-ROM built in multi-lingual user manual
(Continental Europe only)
Video
•
•
•
Signal system: PAL / NTSC
Composite video output: 1Vp-p (75 ohm)
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p/24Hz
Laser Specification
Audio
•
•
•
LaserType (Diode):AlGaInN (BD),AlGaInP
(DVD/CD)
Wave length: 398 ~ 412nm (BD), 650 ~
664nm (DVD), 784 ~ 796nm (CD)
Output power (Max ratings): 20mW (BD),
7mW (DVD), 7mW (CD)
•
2 Channel analog output
•
Audio Front L + R : 2Vrms (> 1
kohm)
•
7.1 Channel analog output
•
Audio Front L + R : 2Vrms (> 1
kohm)
EN 23
picture display. Or wait for 10 seconds for
auto recovery.
If this player is connected to an
unauthorized display device with an HDMI
cable, the audio and video signals may not
be output.
6 Troubleshooting
•
Warning
The disc does not play high-definition video.
• Risk of electric shock. Never remove the casing of the
player.
•
Make sure that the disc contains high-
definition video.
•
Make sure that theTV supports high-
definition video.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
If you contact Philips, you will be asked for the
model and serial number of this player.The
model number and serial number are on the
back of this player.Write the numbers here:
Model No. _____________________________
Serial No. ______________________________
Sound
No audio output from theTV.
•
Make sure that the audio cables are
connected to the audio input of theTV.
Make sure that theTV is switched to the
correct source input for this player.
•
No audio output from the loudspeakers of
the external audio device (home theater or
amplifier).
•
Make sure that the audio cables are
connected to the audio input of the audio
device.
Switch the external audio device to the
correct audio source input.
Main unit
The buttons on this player do not work.
•
Disconnect this player from the power
supply for a few minutes, and then
reconnect.
•
No 7.1 (or 5.1) channel audio from the
loudspeaker of the audio system.
Picture
•
According to multi-channel connection,
select correct sound output: press , and
select [Setup] > [Audio] > [Channels].
Make sure that the disc contains 7.1 (or
5.1) channel audio.
No picture.
•
Make sure that theTV is switched to the
•
•
•
correct source input for this player.
For the composite connection (via the
VIDEO connector) to theTV, on this player
select a video resolution of 480i/576i or
480p/576p to enable video output (press
, and select [Setup] > [Video] > [HDMI
video]) .
•
Make sure that the audio device supports
7.1 (or 5.1) channel audio.
Make sure that the audio format is
supported by the disc and the connected
audio device (amplifier/receiver).
For play of video files with DTS multi-
channel audio from USB or DLNA, only 2
channel audio can be heard from multi-
channel connection.
•
No picture on HDMI connection.
•
Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.
•
On the remote control, press and then
press “731” (numeric buttons) to recover
24 EN
No sound on HDMI connection.
•
For a USB HDD (a portable hard disc
drive), an external power source may be
needed.
•
You may not hear any sound from the
HDMI output if the connected device
is non-HDCP compliant or only DVI-
compatible.
'No entry' or 'x' sign is displayed on theTV.
The operation is not possible.
•
No secondary audio output for Picture-in-
Picture feature.
EasyLink feature does not work.
•
Make sure that this player is connected
to the Philips brand EasyLinkTV, and the
EasyLink option is turned on (see "Use
your Blu-ray disc/ DVD player" > "Use
Philips EasyLink").
•
When [Bitstream] under the [HDMI
Audio] or [Digital Audio] menu is selected,
interactive sound like secondary sound for
Picture-in-Picture feature is muted. De-
select [Bitstream].
Cannot access BD-Live features.
•
Make sure that this player is connected to
the network (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
Make sure that the Blu-ray disc supports
BD-Live features.
Clear memory storage (see "Change
settings" > "Advanced options (BD-Live
security, clear memory...)").
Play
Cannot play a disc.
•
•
•
Clean the disc.
•
Make sure that the disc is correctly loaded.
Make sure that this player supports the
disc. See "Specifications".
•
•
•
•
Make sure that this player supports the
region code of the DVD or BD.
For DVD±RW or DVD±R, make sure that
the disc is finalized.
Cannot play DivX video files.
Cannot download video from an online video
store.
•
•
•
Make sure that the DivX video file is
complete.
Make sure that the video file name
extension is correct.
To play DivX DRM protected files from a
USB storage device or a network, connect
this player to aTV through HDMI.
•
Make sure that this player is connected to
the network (see “Use your Blu-ray disc/
DVD player” > “Set up a network”).
Make sure that this player is connected to
theTV through an HDMI cable.
Make sure that the SD card is formatted,
has enough memory to download the
video, and is of type SDHC Class 6.
Make sure that you have paid for the video,
and it is within the rental period.
•
•
DivX subtitles do not display correctly.
•
Make sure that the subtitle file has the
same name as the DivX video file.
Make sure that the subtitle file has an
extension name supported by this player
(.srt, .sub, .txt, .ssa, or .smi).
•
•
Network
Cannot read the contents of a connected USB
storage.
Wireless network is not found or distorted.
•
Make sure that the network is correctly
connected (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
•
Make sure that the format of the USB
storage device is compatible with this
player.
•
•
Make sure that the file system on the USB
storage device is supported by this player.
EN 25
•
•
Make sure that the wireless network is
not disturbed by microwave ovens, DECT
phones, or other neighboring Wi-Fi devices.
If the wireless network does not work
properly, try a wired network installation
(see "Use your Blu-ray disc/ DVD player" >
"Set up a network").
SmartTV does not work.
•
•
•
Make sure that the network is correctly
connected (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
Check the router connection (refer to the
user manual for the router).
Browse PC and SmartTV work slowly.
•
Look in your wireless router’s user manual
for information on indoor range, transfer
rate, and other factors of signal quality.
You need a high speed Internet connection
for your router.
•
3D videos
Cannot see 3D effects
•
Make sure that 3D output is turned on(see
"Use your Blu-ray disc/ DVD player" >
"Play a Blu-ray 3D video").
•
•
Make sure that the disc title being played is
Blu-ray 3D compliant.
Make sure that theTV is 3D and HDMI
compliant, and theTV is set to 3D mode
(refer to theTV's user manual).
•
Make sure that the 3D glasses are activated
(refer to theTV’s user manual).
26
ABOUT DIVXVIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation.This is an official DivX
Certified® device that plays DivX video.Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVXVIDEO-ON-DEMAND:This
DivX Certified® device must be registered
in order to play purchased DivXVideo-on-
Demand (VOD) movies.To obtain your
registration code, locate the DivXVOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
‘Blu-rayTM’,‘Blu-ray DiscTM’,‘Blu-ray DiscTM’ logo,
‘Blu-ray 3DTM’ and ‘Blu-ray 3DTM’ logo are the
trademarks of Blu-ray Disc Association.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
DivX Certified® to play DivX® and DivX Plus®
HD (H.264/MKV) video up to 1080p HD
DLNA® , the DLNA Logo and DLNA
CERTIFIED® are trademarks, service marks,
or certification marks of the Digital Living
Network Alliance.
including premium content.
DivX®, DivX Certified®, DivX Plus® HD and
associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
BONUSVIEW™
‘BD LIVETM’ and ‘BONUSVIEWTM’ are
trademarks of Blu-ray Disc Association.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD and
the Symbol together are registered trademarks
& DTS-HD Master Audio is a trademark of
DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
‘DVDVideo’ is a trademark of DVD Format/
Logo Licensing Corporation.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
27
Philips Consumer Lifestyle
SGP-1209-CE-BDP7700/12
..............................................................
(Report No. / Numéro du Rapport)
CE2012
........................................................................................
(Year in which the CE mark is affixed / Année au cours
de laquelle le marquage CE a été apposé)
EC DECLARATION OF CONFORMITY
(DECLARATION DE CONFORMITE CE)
We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
(Name / Nom de l’entreprise)
TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS
(address / adresse)
Declare under our responsibility that the electrical product(s):
(Déclarons sous notre propre responsabilité que le(s) produit(s) électrique(s):)
PHILIPS
BDP7700/12
.......................................................................
...........................................................
(brand name, nom de la marque)
(Type version or model, référence ou modèle)
Blu-ray Disc / DVD Player
..............................................................................................
(product description, description du produit)
To which this declaration relates is in confirmity with the following harmonized standards:
(Auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes)
(title, number and date of issue of the standard / titre, numéro et date de parution de la norme)
EN60065:2002, A1:2006, A11:2008, A2:2010
EN55013:2001, A1:2003, A2:2006
EN55020:2007
EN55022:2006, A1:2007
EN55024:1998, A1:2001, A2:2003
EN61000-3-2:2006, A1:2009, A2:2009
EN61000-3-3:2008
EN62311:2008
IEC62087:2008
IEC62301:2005
EN300 328-1 V1.7.1:2006
EN301 489-1 V1.8.1:2008
EN301 489-17 V2.1.1:2009
Following the provisions of :
(Conformément aux exigences essentielles et autres dispositions pertinentes de:)
2006/95/EC (Low Voltage Directive / Directive Basse Tension 2006/95/CE)
2004/108/EC (EMC Directive / Directive EMC 2004/108/CE)
1999/5/EC (R&TTE Directive / Directive R&TTE 1999/5/CE)
2009/125/EC (ErP Directive / Directive ErP 2009/125/CE)
EC1275/2008 (Regulation for ErP Directive / Reglement pour les ErP Directive)
And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC
Permanent Documents
(Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC)
Safety : SG ITS-4689
EMC
EMF
: NEI-EMC-1-1111C215; NEI-EMC-2-1111C215
: NEI-EMF-1-1111C215
RTTE : NEI-ETSP-1-1111C215; NEI-ETSE-1-1111C215
Remarks:
(Remarques:)
Drachten, Netherlands, February 29, 2012
A. Speelman, CL Compliance Manager
...........................................................
(place,date / lieu, date)
.....................................................................................................
(signature, name and function / signature, nom et fonction)
28
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
Ё᭛
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
29
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
BDP7700_12_UM_V2.0
|
