Philips 55PFL66X6H User Manual

www.philips.com/welcome

32PFL66x6H

37PFL66x6H

40PFL66x6H

46PFL66x6H

55PFL66x6H

32PFL66x6K

37PFL66x6K

40PFL66x6K

46PFL66x6K

55PFL66x6K

32PFL66x6T

37PFL66x6T

40PFL66x6T

46PFL66x6T

55PFL66x6T

EN User Manual

1 Get started

TV tour

Remote control

To open or close the Find menu.

In the Find menu, access the channel list.

To adjust the volume.

To open or close the Text menu.

In the Text menu, access teletext for news

and information.

To switch TV channels.

To open or close the Options menu.

Options menus offer convenient settings for

TV channels or programmes.

To open or close the Home menu.

In the Home menu, access connected

devices, picture and sound settings, and

other useful features.

To return to the previous menu page or to

exit from a TV function.

Press and hold to return to watching TV.

To open or close the Source menu.

In the Source menu, access connected

devices.

To select a red menu option, access digital

Interactive TV services*, or watch TV

demonstration clips.

*Available on certain models only.

Connect devices

To select a green menu option or to access

energy efficient settings.

To select a yellow menu option or to access

the electronic user manual.

Read more about the remote control in Use

your TV > Controls > Remote control

For the best picture and sound quality,

connect a DVD, Blu-ray disc player, or game

console through HDMI (TM).

(Page 11).

Alternatively, look at the index in Search

To watch a non EasyLink compliant device,

add it to the Home menu.

for...

Press to select the next TV tour.

1. Press > [Add your devices].

2. Follow the onscreen instructions.

Note: If you are prompted to select the TV

connection, select the connector that this

device uses. See Connect your TV >

Connect devices (Page 44) for information

on connection.

If an EasyLink or HDMI-Consumer Electronic

Control (HDMI-CEC) compliant device is

connected to the TV, it is automatically

added to the Home menu when both

devices are switched on.

To watch a connected device

1. Press

2. Select the newly added device icon.

You can learn more on device connections in Connect your TV > Connect devices.

High Definition TV

Ambilight

For high-definition (HD) picture quality,

watch HD programmes.

*Available on certain models only.

Ambilight gives a more relaxed viewing

experience. It automatically adjusts the

colour and brightness of the light to match

the TV picture.

On standard-definition (SD) programmes,

the picture quality is standard.

You can watch HD video content in these

ways and more:

Read more about network connections in

Connect your TV > Computers and the

Internet (Page 52).

Select a key and press OK to carry out its

function. Press

to hide the onscreen keys.

Select P+ and P- to scroll up and down on a

web page.

Zoom page

You also need an SD memory card to insert

into the TV SD card slot.

To zoom in and out on an Internet page,

SD memory size

press

OPTIONS and select [Zoom

Use a blank SD memory card of type SDHC

class 6, with at least 4 GB of storage

capacity.

page]. Use the slider bar to set the

enlargement.

To scroll through an Internet page, use the

Navigation buttons to jump from highlight

to highlight.

Reload page

For high-definition video, make sure that you

use an SDHC card with at least 8 GB of

storage capacity.

Note: If the write speed is insufficient for

video transfer, the TV rejects the SD card.

If a page does not load correctly, reload it.

Press

OPTIONS and select [Reload

Caution: This TV has a standard SD card slot

that can be used only for renting video.

page].

Security info

Follow the instructions described here. If you

insert the card incorrectly, you might damage

the card. All existing content on the SD card

is erased before you download rented

videos.

To view security information about a page,

press

OPTIONS and select [Security

info].

Payment

The store prompts you to log in or to open

a new account if you do not have one. The

a personal PIN code. When you are logged

in, you can select the payment method, a

credit card, or a value code in most cases.

Consult the video store website for more

information on its payment terms.



To enter a number code (PIN), use the

Numeric buttons on the remote

control.



To enter an email address, select the

text field on the page and press OK.

Select a character on the keyboard and

press OK to enter.

Download the video

Format an SD card

When you have paid, you can download the

video on to the video memory. During the

download, you can continue to watch a TV

programme until the TV notifies you that the

video is ready to play.

Before you download rented videos, your

SD card must be formatted.

1. Switch on the TV.

2. As illustrated, insert the SD memory card

into the SD card slot on the side of the TV.

The TV automatically starts formatting the

card.

3. After formatting, leave the SD card in the

slot.

If you cancel a download, you can still

download the video until the rental period

expires.

Watch video

1. Press , select [Browse Net TV].

Rent

View a video store

1. Press

2. Select [Browse Net TV] and press OK.

3. Access the App Gallery to search for

available video stores in your country.

The installed video stores are displayed.

2. Select the video store where you rented

the video, then press OK.

3. With your log-in information, enter the

online video store.

4. Select the video from the list of

downloaded videos, then press OK to play.

4. Press the Navigation buttons to select a

store, then press OK to confirm.

The icon of the video store is added to the

home page.

5. To view a store, select its icon and press

OK.

Rent a video

To rent a video, select its icon on the video

store page and press OK. In most cases you

can rent a video for one day or for a couple

of days or even just 1 hour. The way you

select and rent a video varies from store to

store.

Navigate HbbTV pages

To navigate the HbbTV pages, you can use

the navigation buttons, colour buttons,

number buttons, and the

While you watch videos within HbbTV

pages, you can use (play), (pause) and

(stop) buttons.

3 Use more of

your TV

(back) button.

Enjoy HbbTV

What you can do

Some broadcasters of digital channels offer

interactive HbbTV (Hybrid Broadcast

Broadband TV).

With HbbTV, broadcasters combine their

normal TV programme with all kinds of

information or entertainment. You can

browse this information interactively. You

can respond to a programme or vote, do

online shopping or pay for a video-on-

demand programme.

HbbTV text

Some broadcasters offer HbbTV Text, a

new version of Text. Depending on the

broadcaster, you might need an Internet

connection to view HbbTV Text.

To fully enjoy HbbTV, you need to connect

your TV to the Internet. Read more about

connecting the TV to the Internet in

Connect your TV > Computers and the

Internet (Page 52).

You can use the same remote control

buttons to navigate HbbTV Text as you did

to navigate HbbTV pages.

Note: You cannot download files to your TV

with this feature.

Block HbbTV

You can block HbbTV completely.

Access HbbTV

To block HbbTV, press

select [HbbTV on this channel] > [Off].

OPTIONS and

When you tune to a TV channel that offers

HbbTV, the interactive pages will open

automatically or, at some point, you will be

invited to open them.

Depending on the broadcaster, you might

need to press the red button or OK on the

remote control to access the page.

To exit the HbbTV pages, select the relevant

button on screen and press OK.

Smart USB recording

What you can do

With this TV, you can pause a live TV

broadcast from a digital channel. Connect a

USB hard disk to your TV and you can pause

the live broadcast.

If your TV is connected to the Internet, you

can also set a programmed recording of a

digital broadcast.

What you need

Smart USB recording and Pause TV work

only with digital TV channels (DVB broadcast

or similar).

Installation

To pause or record a digital broadcast, you

need to connect a USB hard disk. Use a USB

2.0 compatible hard disk with a minimum of

250 GB hard disk space. Ensure that the USB

hard disk supports a minimum transfer speed

of 30MBps.

To record programmes with the USB hard

disk device, ensure your TV is connected to

the Internet. Read more about connecting

the TV to the Internet in (Page 52).

Caution: Philips is not responsible if the USB

hard disk device is not supported, nor is it

responsible for damage or loss of data in the

device.

Do not overload the USB port. If you

connect an USB device that consumes more

than 500mA power, make sure that it is

connected to its own external power supply.

Once the USB hard disk device is formatted

for this TV, you cannot use the recordings

on another TV. Do not copy or change

recording files on the USB hard disk through

any PC application. This will corrupt your

recordings.

To record programmes with the USB hard

disk device, ensure your TV is connected to

the Internet. Read more about connecting

the TV to the Internet in (Page 52).

If you cannot connect to the Internet, you

can still pause live TV broadcasts. To pause

broadcasts, you need a USB hard disk with a

minimum size of 32 GB hard disk space.

Before you can pause or record a broadcast,

you must format the connected USB hard

disk device.

Connect the USB hard disk to the USB

connector on the side of the TV. If you need

extra USB connectors, use a USB hub.

1. Connect the USB hard disk to the USB

connector on the side of the TV. If you are

using a USB hub for connection, do not

connect any other USB device to the TV

when you are formatting the USB hard disk.

2. Switch on the device and the TV.

3. When the TV is tuned to a digital TV

channel, press

(pause) to start formatting.

Formatting removes all data from the

connected USB hard disk device. Follow the

instructions on screen.

When the USB hard disk is formatted, keep

the device connected permanently.

To jump back to the beginning of the TV

broadcast, press the left navigation button

repeatedly until you reach the beginning of

the broadcast storage or the maximum

timespan.

Pause live broadcast

While you watch a live TV broadcast on a

digital channel, you can pause the broadcast

and continue watching it later. You can

pause TV to answer an urgent phone call or

have a break without having to wait for the

TV commercials. Meanwhile, the broadcast is

stored on the USB hard disk.

Progress bar

To display the progress bar while you watch

TV, press (pause).

With the progress bar on screen, press

Note: You can pause a broadcast for a

maximum time span of 90 minutes.

(reverse) or press

(forward) to select

from where you want to start viewing the

stored broadcast.

Press these buttons repeatedly to change

their speed.

Start recording

If your TV is connected to the Internet, you

can record a TV programme onto the USB

hard disk. Start and manage the recordings

you make from the programme guide on the

TV.



To pause a live TV broadcast, press

(pause). A progress bar appears briefly

on screen.

To continue watching, press (play).

To switch to live TV broadcast again,

press (stop).



Press and select [Programme guide]. If

you find a TV Recording button on the

programme guide page, you can access the

programme guide to start and manage

recordings.

Once you switch to a digital channel, the

USB hard disk starts storing the broadcast.

The stored broadcast on the USB hard disk

is cleared when:

If the TV Recording button is not present,

check if the programme guide data is set to

be updated through the network. Select

[Setup] > [TV settings] > [Preferences] >

[Programme guide] > [From network].



you switch the TV to standby.

you switch to another channel. The

USB hard disk starts storing the content

on the new channel broadcast.

you start watching a programme from a

connected device - a Blu-ray disc player

or digital receiver.

Record now

To record the programme you are

watching, press and select [Programme

guide]. With the current TV programme



highlighted, press

OPTIONS and select

While a programme is recording to the USB

hard disk, you cannot pause a live TV

broadcast.

Record programme. The USB hard disk

starts recording and stops at the end of the

programme.

Instant replay

To stop recording immediately, access the

[Programme guide] and press

OPTIONS, select Stop recording.

While you watch a live TV broadcast from a

digital channel, you can replay the broadcast

instantly.

To replay the last 10 seconds of a live TV

broadcast, press (pause) and press the left

navigation button on the remote control.

To jump back several steps of 10 seconds,

press the left navigation button repeatedly.

Record a programme

Schedule a recording

You can schedule a recording of an

upcoming programme for today or a few

days from today (maximum of 8 days away).

Set a recording for a programme on a

specific channel by entering its date and time

without selecting a programme from the

electronic programme guide.



To schedule a recording, press and

select [Programme guide].

Press and select [Programme guide].

Select Schedule and press OK. You need to

set the channel, date and time span in the

following pages.

At the programme guide page, select the

channel and programme you wish to record.

Press the right or left navigation buttons to

shift the list. You can enter the channel

number to select the channel in the list.

Remove a scheduled recording

To remove a scheduled recording, select the

red circle in front of the recording and press

OK.



To change the date, select the date at

the top of the page and press OK.

Select the date you want and press OK.

Delete a recording

You can set the schedule to record all future

episodes of a programme or set the

To remove a recording, select the recording

in the list and press

OPTIONS and select

schedule to add 10 minutes of buffer at the

end of the recording. Highlight the

Delete recording.

Programme information

programme, press

OPTIONS and select

To view more information on a programme,

select the programme in any programme

guide list and press OK. Depending on the

status of this programme, you can start

watching it, schedule its recording, play back

the recording, or delete the recording from

this page.

Record programme.

Select Schedule and press OK. The

programme is scheduled for recording.

A warning displays automatically when

overlapping recordings are scheduled.

If you plan to record a programme during

your absence, remember to switch the TV

to standby and keep the USB hard disk

switched on.

View Teletext

Manage recordings

Select a page

List of recordings

To view the list of recordings and scheduled

recordings, select the Recordings button

above the programme guide list and press

OK.

On this page with your recordings, you can:

1. Select a channel that has teletext feature,

then press TEXT.

2. Select a page in one of the following ways:



Enter the page number with the

Numeric buttons.

Press

to view the next or



select a recording to watch,

previous page.

Press the Colour buttons to select a

remove recorded programmes,

check the free disk space, or

schedule a timed recording not linked

to a specific TV programme.

colour coded item.

3. Press

to exit.

Watch a recording

To watch a recording, select the arrow in

front of the recording and press OK. The

playback of the recording starts. You can use

the (play),

(forward),

(rewind),

(pause) or (stop) keys on the remote

control to control play.

Teletext options

1. When you view teletext, press OK to

1. When you view teletext, press

OPTIONS.

highlight the first word or number.

2. Press the Navigation buttons to skip to

the word or number to search.

2. Select one of the following options:



[Freeze page] / [Unfreeze page]:

Freeze or unfreeze the current page.

[Dual screen] / [Full screen]: Enable or

disable dual screen teletext. Dual screen

splits the current channel or source to

the left of the screen, with teletext on

the right.

3. Press OK to begin the search.

4. Press until no word or number is

highlighted to exit the search.



Digital teletext

Some digital TV broadcasters offer dedicated

digital text or interactive services on their

digital TV channels, for example, BBC1.



[T.O.P. overview]: Table Of Pages

(T.O.P.) teletext broadcasts allow you

to jump from one subject to another

without using page numbers.

When in digital teletext:



Press the Navigation buttons to select



[Enlarge] / [Normal view]: Zoom in on

the page. Press the Navigation buttons

to move around the enlarged view.

[Reveal]: Hide or reveal hidden

information on a page, such as solutions

to riddles or puzzles.

or highlight items.



Press the Colour buttons to select an

option, then press OK to confirm or

activate.

Note: Digital text services are blocked when



[Cycle subpages]: If subpages are

available, each is shown automatically.

[Language]: Switch to a different

language group to display different

character sets correctly.

subtitles are broadcast and enabled on the

TV. Read Use more of your TV > View

subtitles (Page 31).

Teletext 2.5

3. Press

OPTIONS to exit.

Teletext 2.5 offers more colours and better

graphics than normal teletext. If Teletext 2.5

is broadcast by a channel, it is switched on

by default.

Teletext language

Some digital TV broadcasters provide several

teletext languages. You can set your primary

and secondary language.

To switch Teletext 2.5 on or off

1. Press

2. Select [Setup] > [TV settings] >

[Preferences].

3. Select [Text 2.5] > [On] or [Off], then

press OK.

1. Press

2. Select [Setup] > [Channel settings] or

[Satellite settings].

3. Select [Languages] > [Primary Text] or

[Secondary Text].

4. Select your preferred teletext languages,

then press OK.

Subpages

A teletext page can contain several

subpages. These subpages are shown on a

bar next to the main page number.

If subpages are available on a teletext page,

press or to select them.

Sleeptimer

Set locks and timers

Sleeptimer switches the TV to standby after

a specified time. You can switch off your TV

earlier or reset the sleeptimer during the

countdown.

Clock

You can display a clock on the TV screen.

The clock displays the time that is broadcast

by your TV service operator.

1. Press

2. Select [Setup] > [TV settings] >

[Preferences] > [Sleeptimer].

Display the TV clock

1. While you watch TV, press

2. Select [Status], then press OK.

The clock is displayed on the lower right

hand corner of the TV screen.

OPTIONS.

3. Press the Navigation buttons to set the

sleeptimer.

The sleeptimer can be set up to 180

minutes, in steps of five minutes. The

sleeptimer is switched off if it is set to zero

minutes.

Change the clock mode

The clock mode is automatically

synchronised to the Coordinated Universal

Time (UTC). If your TV cannot receive UTC

transmissions, change the clock mode to

[Manual].

4. Press OK to activate the sleep timer. The

TV switches to standby after the specified

time.

Child lock

To protect children from unsuitable TV

programmes, you can lock the TV or block

age rated programmes.

1. While you watch TV, press

2. Select [Setup] > [TV settings] >

[Preferences].

3. Select [Clock] > [Auto clock mode].

4. Select [Automatic], [Manual] or [Country

dependent], then press OK.

Set or change the child lock code

1. Press

Enable or disable daylight saving

If clock mode is set to [Country

dependent], you can enable or disable

daylight saving for your time zone.

2. Select [Setup] > [Channel settings] >

[Child lock].

3. Select [Set code], or [Change code].

4. Enter the code with the Numeric

buttons.

1. In the [Clock] menu, select [Daylight

saving] > [Daylight saving time] or

[Standard time], then press OK. Daylight

saving is enabled or disabled.

Set the clock manually

If clock mode is set to [Manual], set the date

Tip: If you forget your code, enter '8888' to

override any existing codes.

Lock or unlock channels

1. In the child lock menu, select [Channel

lock].

2. Enter the child lock code with the

Numeric buttons. The [Channel lock] menu

appears.

and time manually.

1. In the [Clock] menu, select [Date] or

[Time], then press OK.

2. Use the Navigation buttons to make your

3. Select channels to lock or unlock.

selection.

3. Select [Done], then press OK.

Parental rating

Subtitle language

Some digital broadcasters rate their

You can change the subtitle language on

some digital channels.

programmes according to age. You can set

your TV to display only programmes with

age ratings lower than your child's age.

1. Press

2. Select [Setup] > [Channel settings] or

[Satellite settings] > [Subtitle language].

3. Select [Primary subtitles] or [Secondary

subtitles] for the preferred language.

4. Press OK to confirm.

1. Press

2. Select [Setup] > [Channel settings] or

[Satellite settings].

3. Select [Child lock] > [Parental rating].

A message prompts you to enter the child

lock code.

Tip: You can also press

OPTIONS >

[Subtitle language].

4. Enter the child lock code with the

Numeric buttons.

5. Select an age rating, then press OK.

All programmes above the selected age

rating are blocked.

View Scenea

What you can do

You can display a default picture as the

wallpaper on your TV. You can also load

another picture as the wallpaper.

For information on child lock codes, see Use

more of your TV > Set locks and timers >

Child lock (Page 30).

If the sleeptimer is off, the wallpaper is

displayed for 240 minutes. Otherwise, it is

displayed for the duration of the sleeptimer.

View subtitles

Analogue channels

1. Switch the TV to an analogue TV channel.

2. Press TEXT.

What you need

To use another picture as the wallpaper, you

need a USB storage device that contains a

picture that is less than 1 MB in size.

3. Enter the three-digit page number of the

subtitles page (usually '888').

Switch on

4. Press

Subtitles display if available.

to exit teletext.

1. Press

2. Select [Scenea], then press OK.

Digital channels

The default picture is displayed.

1. Press

OPTIONS.

Note: The wallpaper is displayed for the

duration of the sleeptimer. For more

information on sleeptimer, see Use more of

your TV > Set locks and timers >

Sleeptimer (Page 30).

2. Select [Subtitles], then press OK.

3. Select [Subtitles off], [Subtitles on] or

[On during mute], then press OK.

Note:



If MHEG application is activated,

subtitles are not displayed.



If you select [On during mute], subtitles

are displayed only when you press to

mute the sound.

Set TV wallpaper

Hearing impaired

Tip: To verify whether a hearing impaired

You can load another picture as the

wallpaper.

audio language is available, press

OPTIONS and select [Audio language].

Languages with an ear icon support hearing

impaired audio.

To switch on hearing impaired audio and

subtitles

Note: Loading a new picture overrides the

existing picture.

1. Connect the USB storage device to the

TV.

2. Press

1. While you watch TV, press

OPTIONS.

3. Select [Browse USB], then press OK.

2. Press one of the following buttons to

select an option:

4. Select a picture, then press

OPTIONS.

5. Select [Set as Scenea], then press OK.

6. Select [Yes], then press OK.

7. Press any button to exit Scenea.



Red: Switch hearing impaired on or off.

Green: Switch on hearing impaired

audio and subtitles.

3. Press

to exit.

Set Scenea lounge light

When the TV is in standby, you can switch

on Ambilight and create a lounge light effect

with your wallpaper. Ambilight is available on

certain models only.

Visually impaired

Tip: To verify whether visually impaired

audio is available, press

select [Audio language]. Languages with an

OPTIONS and

When the TV is in standby, press

AMBILIGHT on the front of the TV.

eye icon support visually impaired audio.

To switch on visually impaired audio (if

available)

Note: It can take more than 5 seconds for

the lounge light to switch on.

1. While you watch TV, press

OPTIONS.

To select another colour for the lounge light,

see Use your TV > Ambilight > Setup (Page

19).

2. Press the green button to select [Visually

impaired].

3. Press one of the following buttons to

select an option:

Set universal access



Red - [Off]: Turn off visually impaired

audio.



Yellow - [Headphones]: Hear visually

impaired audio from headphones only.

(if applicable)

Green - [Speakers]: Hear visually

impaired audio from speakers only.

Blue - [Speakers + headphones]: Hear

visually impaired audio from speakers

and headphones.

Switch on

Some digital TV broadcasters provide special

audio and subtitle features for people who

are hearing or visually impaired.



To enable these features, turn on universal

access in the preference menu.

1. Press

2. Select [Setup] > [TV settings] >

[Preferences].

3. Select [Universal access] > [On], then

press OK.

4. Press

to exit.

Note: If the EasyLink remote control is

enabled, you cannot select the green or

yellow buttons. To disable, seeUse more of

your TV > Use EasyLink > Switch on. (Page

34)

Adjust volume for the visually impaired

1. In the [Universal access] menu, press the

yellow button to select [Mixed volume].

2. Press the Navigation buttons to move the

slider up or down, then press OK.

System audio control

If you connect an HDMI-CEC compliant

device that includes speakers, you can

choose to hear the TV from those speakers

instead of the TV speakers.

3. Press

to exit.

For more information about TV audio

output, see Use more of your TV > Use

EasyLink > Select speaker output (Page 34).

Audio feedback for the visually impaired

This feature enables audio feedback when

buttons are pressed on the remote control

or TV.

EasyLink remote control

You can control multiple HDMI-CEC

compliant devices with your TV remote

control.

1. In the [Universal access] menu, press the

blue button to select [Key beep].

2. Press the green button to turn on audio

feedback, or press the red button to turn it

off.

To switch on EasyLink Remote Control, see

Use more of your TV > Use EasyLink >

Control devices simultaneously (Page 34).

3. Press

to exit.

Retain picture quality

If your TV picture quality is affected by the

picture-processing features of other devices,

switch on Pixel Plus Link.

Use EasyLink

To switch on Pixel Plus Link, see Use more

of your TV > Use EasyLink > Retain picture

quality (Page 35).

What you can do

Get the most out of your HDMI-CEC

compliant devices with Philips EasyLink

enhanced control features. If your HDMI-

CEC compliant devices are connected

through HDMI, you can control them at the

same time with your TV remote control .

Maximize display for subtitled video

While you view subtitles in a video, you can

maximize the video display area. Some

subtitles can create a separate subtitle bar

under the video, which limits the video

display area. After you switch on auto

subtitle shift, the subtitles display on top of

the video image, which maximizes the video

display area.

Note: Other brands describe HDMI-CEC

functionality differently. Some examples are

Anynet (Samsung), Aquos Link (Sharp) or

BRAVIA Sync (Sony). Not all brands are fully

compatible with Philips EasyLink.

To switch on auto subtitle shift, see Use

more of your TV > Use EasyLink >

Maximize display for video with subtitles

(Page 35).

After you switch on Philips EasyLink, these

features are available:

One-touch play

When you play an HDMI-CEC compliant

device, the TV switches on from standby,

and switches to the correct source.

Hear another device at standby

You can hear a connected HDMI-CEC

compliant device through the TV speakers,

even when the TV is in standby.

One-touch standby

When you press on the TV remote

control, the TV and all HDMI-CEC

compliant devices switch to standby mode.

To switch on, see Use more of your TV >

Use EasyLink > Hear another device at TV

standby (Page 35).



(Previous) / (Next): Search

backwards and forwards on the

connected device.

Numeric buttons: Select a title, chapter

or track.

Play buttons: Control video or music

play.

Standby: Display the menu of the

connected device.

: Display the TV menu.

What you need

To benefit from Philips EasyLink advanced

control features, make sure that you do the

following:



Connect at least two HDMI-CEC

compliant devices through HDMI

Configure each HDMI-CEC compliant

device properly

Switch on EasyLink



(Standby): Switch the TV and the

connected device to standby.

Switch on

To switch on or off EasyLink

Other EasyLink buttons are available through

the On-Screen Remote Control (OSRC).

Note: If you do not intend to use Philips

Easylink, switch it off.

To access the OSRC

1. While you view content from a connected

device, press

2. Select [Show device keys], then press

OK.

1. Press

2. Select [Setup] > [TV settings] >

[EasyLink].

OPTIONS.

3. Select [On] or [Off], then press OK.

3. Select an onscreen button, then press OK.

Control devices simultaneously

4. Press

to exit.

If you connect multiple HDMI-CEC devices

that support this setting, all the devices

respond to the TV remote control.

Select speaker output

If the connected device is HDMI Audio

Return Channel (HDMI ARC) compliant,

you can output TV audio through an HDMI

cable. An additional audio cable is not

required. See Connect your TV > About

cables > HDMI (Page 43).

Caution: This is an advanced setting. Devices

that do not support this setting will not

respond to the TV remote control.

1. Press

2. Select [Setup] > [TV settings] >

[EasyLink].

Configure TV speakers

1. Press

3. Select [EasyLink Remote Control] >

[On] or [Off].

4. Press OK to activate.

2. Select [Setup] > [TV settings] >

[EasyLink] > [TV speakers].

3. Select one of the following options, then

Notes:

press OK:



To switch back to TV control, press

then select [Watch TV].



[Off]: Switch off TV speakers.

[On]: Switch on TV speakers.

[EasyLink]: Stream TV audio through

the connected HDMI-CEC device.

Switch the TV audio to the connected

HDMI-CEC audio device through the

adjust menu.



To control another device, press

then select the device from the Home

menu.



To exit, press

EasyLink buttons

Control HDMI-CEC compliant devices with

the following buttons on the TV remote

control.



[EasyLink autostart]: Turn off TV

speakers automatically and stream TV

audio to the connected HDMI-CEC

audio device.



OK: Start, pause or resume play on the

connected device, activate a selection,

or access the device menu.

Select speaker output with Adjust menu

If [EasyLink] or [EasyLink autostart] are

Maximize video display

Some subtitles can create a separate subtitle

bar under the video, which limits the video

display area. After you switch on auto

subtitle shift, the subtitles display over the

video image, which maximizes the video

display area.

selected, access the adjust menu to switch

the TV audio.

1. While you watch TV, press ADJUST.

2. Select [Speakers], then press OK.

3. Select one of the following, then press

OK:

Switch on auto subtitle shift



[TV]: On by default.

1. Press

Stream TV audio through the TV and

the connected HDMI-CEC audio device

until the connected device switches to

system audio control. TV audio is then

streamed through the connected

device.

2. Select [Setup] > [TV settings] >

[EasyLink] > [Auto subtitle shift].

3. Select [On], then press OK to activate.

Note: Make sure that the picture format of

the TV is set to [Auto format] or [Movie

expand 16:9].



[Amplifier]: Stream audio through the

connected HDMI-CEC device. If system

audio mode is not enabled on the

device, audio continues to stream from

the TV speakers. If [EasyLink autostart]

was enabled, the TV prompts the

connected device to switch to system

audio mode.

Hear another device at TV standby

You can hear a connected HDMI-CEC

compliant device through the TV speakers,

even when the TV is in standby.

1. Press ADJUST to receive audio from

the connected Philips EasyLink device.

If available, audio only mode is enabled.

2. Accept the prompt on the TV to turn off

the TV screen.

Retain picture quality

If your TV picture quality is affected by the

picture-processing features of other devices,

switch on Pixel Plus Link.

3. Control the audio playback with the TV

remote control.

To switch on Pixel Plus Link

1. Press

2. Select [Setup] > [TV settings] >

[EasyLink].

3. Select [Pixel Plus link] > [On], then press

OK.



[PC mode]: Allow picture settings to be

changed when a PC is connected to the

TV through HDMI.

4 Set up your TV

If enabled, you can select [Picture

format] > [Unscaled] which provides

maximum detail for display of PC

content.

[Light sensor]: Adjust settings

dynamically to match lighting conditions.

[Picture format]: Change the picture

format.

[Screen edges]: Change the picture size.

[Picture shift]: Adjust the position of

the picture. You cannot select this

setting if the selected picture format is

Auto zoom or Wide screen.

Settings assistant

Use the settings assistant to guide you

through the picture and sound settings.



1. While you watch TV, press

2. Select [Setup] > [Quick picture and

sound settings], then press OK.

3. Select [Start], then press OK.

4. Follow the onscreen instructions to

choose your preferred settings.



Picture and sound

More sound settings

1. Press

More picture settings

2. Select [Setup] > [TV settings] > [Sound],

then press OK.

1. Press

2. Select [Setup] > [TV settings] >

[Picture], then press OK.

3. Select a setting to adjust:



[Smart sound]: Access predefined

3. Select a setting to adjust:

smart sound settings.



[Smart picture]: Access predefined



[Reset]: Reset to factory default

settings.

smart picture settings.



[Reset]: Reset to default settings.

[Contrast]: Adjust the intensity of the

bright areas, keeping dark areas

unchanged.



[Bass]: Adjust the bass level.

[Treble]: Adjust the treble level.

[Surround]: Enable spatial sound.

[Headphones volume]: Adjust

headphone volume.



[Brightness]: Adjust the intensity and

details of the dark areas.



[Auto volume leveling]: Automatically

reduce sudden volume changes, for

example when switching channels.

[Balance]: Adjust the balance of the left

and right speakers.



[Colour]: Adjust colour saturation.

[Hue]: Compensate colour variations in

NTSC encoded transmissions.

[Sharpness]: Adjust sharpness in the

image.

[Noise reduction]: Filter and reduce

noise in the image.

[Tint]: Adjust the colour balance in the

image.



[Custom tint]: Customise tint setting.

[Pixel Plus HD] / [Pixel Precise HD]:

Access advanced settings, including [HD

Natural Motion], [100 Hz Clear LCD],

[Advanced sharpness], [Dynamic

contrast], [Dynamic backlight], [MPEG

artefact reduction], [Colour

enhancement], [Gamma].

Audio settings

Select audio language

Channels

If the TV channel has multiple or dual sound

broadcast, you can select the preferred

audio language.

Reorder and rename

Reorder channels

While you watch TV, press

OPTIONS.

After the channels are installed, you can

reorder the channel list to your preference.

1. While you watch TV, press FIND. The

channel list is displayed.

2. Select the channel to reorder and press

OPTIONS.

3. Select [Reorder], then press OK.



[Audio language]: Select the audio

language for digital channels.

[Dual I-II]: Select the audio language for

analogue channels.



Digital TV channels can stream several audio

languages. If multiple languages are available,

select the preferred language.

4. Press the Navigation buttons to move the

highlighted channel to another location, then

1. Press

press OK.

2. Select [Setup] > [Channel settings] or

5. Select one of the following options, then

press OK.

[Satellite settings] > [Language].

3. Select one of the following settings, then

press OK:



[Insert]: Insert the channel into the

desired location.



[Primary audio] / [Secondary audio]:

Select the available audio language.

Set a secondary language in the same

menu. If the primary language is

unavailable, the TV receives this

language.



[Swap]: Swap location with another

channel.

6. Once complete, press

OPTIONS and

select [Exit].

Rename channels



[Preferred audio format]: Select to

receive standard audio format (MPEG)

or advanced audio formats (AAC, EAC-

3 or AC-3 if available).

[Mono/Stereo]: Select mono or stereo

audio if stereo broadcasting is available.

After the channels are installed, you can

rename them to your preference.

1. While you watch TV, press FIND. The

channel list is displayed.

2. Select the channel to rename and press

OPTIONS.

4. Press

to exit.

3. Select [Rename], then press OK.

4. In the entry screen, press the Navigation

buttons or Numeric buttons to edit the

name, then press OK.

Reset to factory settings

You can restore default picture and sound

settings, while the channel installation settings

remain the same.

Tip: You can press OK in the entry screen

to enable the Onscreen Keyboard.

1. While you watch TV, press

2. Select [Setup] > [TV settings] > [Factory

settings], then press OK.

5. Once complete, press the Navigation

buttons to select [Done].



To clear the entry, select [Clear].

To cancel, select [Cancel].

TV settings are reset to default.

6. Press OK to confirm.

7. Press to exit.

To disable automatic updates

Hide or unhide

Hide channels

To prevent unauthorised access to channels,

hide them from the channel list.

In the [Channel installation] menu, select

[Automatic channel update] > [Off].

Automatic install

1. While you watch TV, press FIND.

2. Select the channel to rename and press

OPTIONS.

3. Select [Hide channel], then press OK.

The channel is hidden.

When the TV was switched on for the first

time, a full installation of channels was

performed. You can run this full installation

again to set your language, country and install

all available TV channels.

Unhide channels

1. While you watch TV, press FIND.

Select network

To install cable or antenna channels, you

need to switch to the respective network.

2. Press

OPTIONS.

3. Select [Show hidden channels], then press

OK.

Hidden channels appear in the channel list,

but the channel information is not displayed.

1. While you watch TV, press

2. Select [Setup] > [Channel settings].

3. Select [Channel installation] > [Antenna

or Cable DVB].

4. Select a hidden channel, then press

OPTIONS.

4. Select one of the following settings:



[Antenna (DVB-T)]: Access free-to-air

antenna or digital DVB-T channels.

[Cable]: Access cable or digital DVB-C

channels.

5. Select [Unhide all], then press OK. All

hidden channels are displayed.



Update channel list

5. Press OK to confirm.

6. Press to exit.

Start installation

1. Press

When the TV was switched on for the first

time, a full installation of channels was

performed.

You can automatically add or remove digital

channels or manually update channels.

2. Select [Setup] > [Search for channels],

then press OK.

Note: If you are prompted to enter a code,

3. Follow the onscreen instructions to

complete the channel installation.

4. Once complete, select [Finish], then press

OK.

enter '8888'.

Automatic update

To automatically add or remove digital

channels, leave the TV in standby mode. The

TV updates channels and stores new

channels everyday. Empty channels are

removed from the channel list.

Tip: Press FIND to see the channel list.

Notes:



During installation, leave settings

unchanged unless your digital provider

gives you the specific values to enter.

When digital TV channels are found, the

list of installed channels may display

empty channel numbers. You can

rename, reorder or uninstall these

channels.

If a channel update is performed, a message

appears at startup.

If you do not want this message to appear



1. Press

2. Select [Setup] > [Channel settings] or

[Satellite settings].

3. Select [Channel installation] > [Channel

update message].

4. Select [Off], then press OK.

Notes



Install analogue channels

You can search and store analogue TV

channels manually.

Step 1: Select your system

Note: Skip this step if your system settings

are correct.

If the reception is poor, reposition your

antenna and repeat the procedure.

If you receive the channel with DVB-C,

select [Automatic] in [Symbol rate

mode] unless your cable provider



supplies you with a specific symbol rate

value.

1. While you watch TV, press

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual installation] >

[System], then press OK.

4. Select the system for your country or

region, then press OK.

Install satellite channels

Note: Available on certain models only.

[Search for satellite] is only available if the

TV supports DVB-S.

If your satellite receiver is connected to the

SAT connector, you can receive satellite

channels.

Step 2: Search and store new TV channels

1. In the [Analogue: Manual installation]

menu, select [Find channel], then press OK.

1. While you watch TV, press

2. Select [Setup] > [Search for satellite] >

[Reinstall channels].

3. Follow the onscreen instructions to

complete the installation.

4. Once complete, select [Finish], and then

press OK.

2. Select one of the following options:



Press the Navigation buttons or

Numeric buttons to manually enter the

channel frequency.



Select [Search] then press OK to

search for the next channel

automatically.

View satellite channels

To watch satellite channels, press

[Watch satellite].

3. When the correct channel frequency is

entered, select [Done], then press OK.

4. Select [Store as new channel], then press

OK to store the new TV channel.

Fine-tune channels

If the reception of an analogue TV channel is

poor, fine-tune the TV channel.

Install digital and satellite channels

Install digital channels

1. Press

2. Select [Setup] > [Channel settings] >

[Channel installation].

To improve TV reception, reposition the

antenna. You need to know the correct

frequency to tune. For best results, contact

the service provider or get a professional

installer.

3. Select [Analogue: Manual installation] >

[Fine tune], and then press OK.

4. Press or to fine-tune the channel.

5. When you have selected the correct

channel frequency, select [Done], and then

press OK.

6. Select one of the following options, then

press OK.

1. Press

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Digital: Reception test] >

[Search], then press OK.

4. Press the Numeric buttons to enter the

channel frequency.

5. Select [Search], then press OK.



[Store current channel]: Store the

channel as the current channel number.

[Store as new channel]: Store the

channel as a new channel number.



6. When the correct channel is located,

select [Store], then press OK.

7. Press

to exit.

2. Connect the USB storage device

containing the channel list to the TV.

Reinstall channels

ATTENTION: This feature is intended for

dealers and service personnel.

3. Press

4. Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] >

[Copy to TV], then press OK.The channel

list is copied to the TV.

You can copy channel lists from one Philips

TV to another through a USB storage

device. You do not need to search for

channels or install them again on the second

TV. The channel list file is small enough to fit

on any USB storage device.

5. Unplug the USB storage device.

Copy channel list to TV with no channels

installed

What you need

The two Philips TVs must have:

1. Switch on the TV on which you want to

copy the channel list.



the same country setting,

the same year range,

the same DVB type, as indicated by the

suffix (H, K, T, or D/00) in the model

name,

2. Press

3. Select [Setup] > [Search for channels] >

[Reinstall channels], then press OK.

You will be prompted to select the country

where the TV was installed. Make a note of



the same settings for satellite channels,

including the number of LNB satellites

the same hardware type, as indicated by

the sticker on the back of the TV, (for

example Qxxx.xx.Lx), and

the current setting and press

[Cancel] to exit.

followed by

4. If the country setting on the TV is different

from that of the TV whose channel list you

want to copy, reinstall the TV and select the

country setting to match the first TV. See Set

up your TV > Reinstall the TV (Page 42 ).

5. Connect the USB storage device

containing the channel list to the TV where

you want to copy the channel list.



compatible software versions.

An onscreen message will notify you if the

channel list cannot be copied to the second

TV.

Note: If you are prompted to enter a code,

enter '8888'.

Copy channel list to USB

6. Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] >

[Copy to TV], then press OK. The channel

list is copied to the TV storage device.

7. Unplug the USB storage device.

1. Connect a USB storage device to the TV

with the channels installed on it.

2. Press

3. Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] >

[Copy to USB], then press OK. The channel

list is copied to the USB storage device.

4. Unplug the USB storage device.

Menu language

1. While you watch TV, press

2. Select [Setup] > [TV settings] >

[Preferences] > [Menu language].

3. Select a menu language from the list, then

press OK.

Copy channel list to TV with no channels

installed

1. Switch on the TV with no channels

installed on it to start the initial installation.

Select the language and country. The

country setting must be the same as that of

the TV whose channel list you want to copy.

Skip the search for channels.



Access to a computer with a USB port

and internet access.

Other settings

Note: Do not use a USB hard drive.

TV demo

1. Press

2. Select [Setup] > [Update software], then

press OK.

Start a demo to find out more about your

TV's features.

The update assistant starts.

3. Follow the onscreen instructions to start

the update.

Note: Demos are not supported on MHEG

channels.

1. While you watch TV, press

Note: The update assistant directs you to

the Philips support website. Refer to the

installation instructions on the website to

complete the update.

2. Select [Setup] > [Watch demos], then

press OK.

3. Select a demo, then press OK.

4. Press

to exit.

Update from the Internet

To update the TV software directly from the

Internet, connect the TV to the Internet

through a router with a high-speed

connection.

Update software

TV software

Check software version

1. Press > [Setup] > [Update software],

then press OK.

2. Select [Internet], then press OK.

3. Follow the onscreen instructions to start

the update.

1. Press

2. Select [Setup] > [Software settings] >

[Current software info], then press OK.

The version of the current software is

displayed.

When the update is complete, the TV

switches off and back on again automatically.

Wait for the TV to switch back on. Do not

use the power switch on the TV or the

remote control.

Caution: Do not install a lower version of

software than the current version installed

on your product. Philips cannot be held

liable or be made responsible for problems

caused by a software downgrade.

Note: If the TV is connected to the Internet,

the TV displays the availability of new

Update the software through one of these

options:

software at startup.

NonPublish

Update from digital broadcast



update with USB flash drive

update from digital broadcast

update from the Internet

When available, your TV can receive

software updates through digital broadcasts.

A message appears prompting you to update

the software. We strongly recommend that

you update the software when prompted.

For more information, see the following

pages.

Follow the instructions on screen.

Update with USB

Note: If you choose to update the software

at a later time, select > [Setup] >

[Software settings] > [Local updates].

Before performing this procedure, make sure

that you have the following:



Spare time to complete the entire

update.



A USB flash drive that has at least

256MB of storage space, is FAT or

DOS formatted, and has its write

protection disabled.

Update [Help]

Onscreen Help

What you need



Do not switch off the TV or remove

the USB storage device during the

update.

Before you update the onscreen [Help],

make sure that you have the following:



If a power failure occurs during the

update, do not remove the USB storage

device from the TV. The TV continues

to update as soon as power is restored.

If an error occurs during the update,

retry the procedure. If the error

reoccurs, contact Philips Consumer

Care.



A USB storage device that is FAT or

DOS-formatted.



A PC with Internet access.

An archive utility that supports the ZIP

file format (for example, WinZip for

Microsoft Windows or Stufflt for

Macintosh).



Note: Do not use a USB hard drive.

1. Switch on the TV.

2. Disconnect all other USB devices from the

TV.

3. Connect the USB storage device

containing the *.upg file to the USB

connector on the TV.

Download the latest file

1. Insert a USB storage device into the USB

connector on your PC.

2. Create a folder named ‘upgrades’ in the

root directory of the USB storage device.

4. Press

3. In your web browser, navigate to

www.philips.com/support .

4. At the Philips Support site, find your

product and locate the [Help] file for your

TV. The file (a *.upg file) is compressed into

a *.zip archive.

5. Select [Setup] > [Software settings] >

[Local updates] .

The updates screen appears.

6. Select the '*.upg' file and press OK.

A message displays the update status.

7. Follow the onscreen instructions to

complete the update and restart your TV.

5. If the [Help] file is a later version than the

file in your TV, click it.

6. Save it to your PC.

7. Using an archive utility, extract the *.upg

file from the *.zip file.

Reinstall the TV

Reinstall your TV to reset all picture and

sound settings and reinstall all TV channels.

8. Save the *.upg file to the ‘upgrades’ folder

in the USB storage device.

9. Disconnect the USB storage device from

the PC.

1. Press

2. Select [Setup] > [TV settings] >

[Reinstall TV], then press OK.

3. Follow the onscreen instructions.

5 Connect your

About cables

Cable quality

Overview

Before you connect devices to the TV, check

the available connectors on the device.

Connect the device to the TV with the

highest quality connection available. Good

quality cables ensure a good transfer of

picture and sound.

Y Pb Pr

The connections shown in this user manual

are recommendations only. Other solutions

are possible.

Use the Component Video (Y Pb Pr)

connection together with an Audio Left and

Right connection for sound.

Tip: If your device only has composite or

RCA connectors, use a SCART-cinch

adapter to connect the device to a SCART

connector on the TV.

Y Pb Pr can handle high-definition (HD) TV

signals.

Match the Y Pb Pr connector colours to the

cable plugs.

HDMI

An HDMI connection has the best picture

and sound quality.



An HDMI cable combines video and

audio signals. Use HDMI for high-

definition (HD) TV signals, and to

enable EasyLink.

An HDMI Audio Return Channel

(ARC) connector allows output of TV

audio to an HDMI ARC compliant

device.

Do not use an HDMI cable longer than

5 meters / 16.4 feet.

SCART

VGA

A SCART cable combines video and audio

signals.

Use this connection to display PC content

on the TV.

SCART connectors can handle RGB video

signals but cannot handle high-definition

(HD) TV signals.

For video and sound, use the VGA and

AUDIO IN connectors.

Connect devices

Overview

You can connect your devices to the TV with any of the following options. After connection, press

> [Add your devices].

Blu-ray or DVD disc player

Connect the disc player with an HDMI cable to the TV.

Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV.

TV receiver

Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on

certain models only.)

Connect the satellite or digital TV receiver with an HDMI cable to the TV.

Connect the satellite or digital TV receiver with a SCART cable to the TV.

Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R

cable to the TV.

Recorder

Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.)

Connect the recorder with a SCART cable to the TV.

Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.

For the best gaming experience, set the TV

to game mode.

Game console

The most practical connectors for a game

console are on the side of the TV. However,

you can also use the connectors at the back

of the TV.

1. Press ADJUST.

2. Select [Smart picture] > [Game], then

press OK.

3. To exit, press

Connect the game console with an HDMI cable to the TV.

Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV.

Home theatre system

Connect the home theatre with an HDMI cable and an optical or coaxial audio cable to the TV.

(Optical audio output is available on certain models only.)

Connect the home theatre with a SCART cable to the TV.

Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV.

Digital camera

Connect the digital camera with a USB cable to the TV.

Digital camcorder

Connect the digital camera with an HDMI cable to the TV.

Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.

Connect more devices

External hard disk

Connect the external hard disk with a USB cable to the TV.

Computer

Connect the computer with an HDMI cable to the TV.

Connect the computer with a DVI-HDMI cable to the TV.

Connect the computer with a VGA cable and an audio cable to the TV.

What you need

Warning: This TV complies with the EMC

directive only when you use a shielded

Cat5 ethernet cable.

Computers and the

Internet

What you can do

Network benefits

To connect your TV to computers, the

Internet, or both, you need:



An ethernet cable that is shorter than 3

metres.

If you connect your TV to a computer

network with storage devices such as

computers, you can play the photos, music

and videos on your devices. See Use your

TV > Browse PC through DLNA (Page 19).



A computer network that includes:

a) A universal plug-and-play (UPnP)

router and

b) A computer with one of these

operating systems: Microsoft Windows

XP, Microsoft Windows Vista, Mac

OSX, or Linux.

If you connect your TV to a computer

network with Internet access, you can access

Net TV content. For more information

about Net TV, see Use your TV > Browse

Net TV (Page 21).



To connect your TV to computers, you

also need media server software that is

set to share files with your TV. See Use

your TV > Browse PC through DLNA

Note: If the apparatus does not recover in

DLNA mode due to external electrical

disturbances (e.g. electrostatic discharge),

user intervention is required.

(Page 19).

To connect your TV to the Internet,

you also need a high-speed connection

to the Internet.

Note: This DLNA1.5 network feature

supports these computer operating systems:

Microsoft Windows XP or Vista, Intel Mac

OSX or Linux.



You should turn off any unused

network equipment in the home

network as this increases network

traffic.

Connect

Reception quality is dependent on the

location of the wireless router, as well

as the quality of services provided by

the local Internet Service Provider.

When playing video over your wireless

home network, we recommend that

you use an IEEE 802.11 N router. The

connection speed may differ according

to the operating environment of your

wireless home network.

1. Switch on the router and switch on its

DHCP setting.

2. With the ethernet cable, connect the

router to the TV.

Alternatively, you can also connect the

router to the TV wirelessly, through a

wireless USB adaptor (not included). See

Connect your TV > Computers and the

Internet > Wireless LAN ready (Page 53).

Make your TV wireless

1. Switch on your wireless network router.

2. Insert the USB adapter PTA01 into the

USB connection at the side of the TV. The

wireless installation starts automatically.

3. Follow the on screen instructions.

3. Press , select [Setup] > [Connect to

network], then press OK.

4. Follow the onscreen instructions to install

the network.

WPS - Wi-Fi Protected Setup

If your router supports WPS (Wi-Fi

Protected Setup), press the WPS button on

the router. Return to the TV in 2 minutes,

select [WPS] and press OK. The TV

connects to your network. This takes about

2 minutes. Complete the installation.

5. Wait for the TV to find the network

connection.

6. If you are prompted, agree to the End

User License Agreement.

Wireless LAN ready

Most new wireless routers have the WPS

system and carry the WPS logo. The WPS

system uses WPA security encryption and

cannot be combined with devices on your

network that use the WEP security

encryption. If you still need this WEP device

in your network, install with [Scan] >

[Custom].

This TV is Wireless LAN ready. With the

Wireless LAN adapter PTA01 accessory

(sold separately), you can connect the TV to

your home network wirelessly. You can

enjoy the best of the web from Net TV

services, and sharing of content between

your devices connected to the home

network using Wi-Fi MediaConnect or

DLNA, seamlessly and hassle free.

Scan for routers

If you have several routers in your network,

you can select the network you need. To

select a specific network router, press

[Scan]on the first page of the installation.

Note:



The wireless network operates in the

same 2.4GHz frequency spectrum as

common household devices, such as

Dect phones, microwave ovens or

Bluetooth devices, which can cause Wi-

Fi interferences. Move these devices

away from the TV with the connected

Wireless USB adapter.

The routers with WPS and the strongest

signal are shown first in the list on screen.

Select the router you need. If you are

connecting a WPS router, select [WPS] on

the TV.



If you have set the PIN code in your

router software, select [WPS pincode:]

and enter the code.

What you need

To use Wi-Fi MediaConnect, you need the



To enter the encryption key manually,

select [Custom] and enter the key.

following:

PIN code



Connect the TV to your home network

A wireless router

A wireless USB adapter (only for TVs

which are not Wi-Fi integrated).

To set the secured connection with a PIN

code, select the PIN code and press OK.

Write down the 8 digit PIN code shown on

the TV and enter it in the router software

on your PC. See the router manual for

where to enter the PIN code.

For the availability of the wireless USB

adapter, check with your local retailers or

buy online at www.philips.com/tv .

Custom

Install Wi-Fi MediaConnect

To enter the encryption key (the security

key) manually, select [Custom] and press

OK. If you have WPA security on your

1. Insert the Wi-Fi MediaConnect CD-ROM

in your PC.

2. Your PC starts your Internet browser and

opens the Wi-Fi MediaConnect download

page - www.philips.com/wifimediaconnect .

On the website, you can check the

necessary PC system requirements.

router, enter the passphrase with the

remote control.

To access the on-screen keyboard, select the

text entry field and press OK. If you have

WEP security encryption, the TV asks for the

WEP encryption key in hexadecimal

numbers.

3. Enter the code printed on the CD-ROM

envelope.

4. Click the 'Download now' button to

download the free Wi-Fi MediaConnect

software.

5. Once downloaded, start the file 'Wi-Fi

MediaConnect_setup.exe'. Follow the

instructions on your PC.

Find this hexadecimal key in the router

software on your PC. Write down the first

key of the WEP keys list and enter it on the

TV with the remote control. If the security

key is accepted, the TV is connected with

the wireless router.

TV network name

If asked, agree to the End User License

Agreement.

If you have more than one TV in your home

network, you can rename this TV. To

If you are using the Wireless USB adapter,

keep it connected to the USB connector on

the TV.

rename this TV in the network, press

[Setup] > [Network settings] and select the

TV network name.

To enter the name, press OK to open the

on-screen keyboard or use the remote

control keypad.

Wi-Fi MediaConnect

What you can do

With Wi-Fi MediaConnect, you can project

your PC screen on the TV wirelessly. With

the *Wi-Fi MediaConnect CD-ROM, you

can download the software for free. Wi-Fi

MediaConnect is only available for PC.

Start projecting

To start projecting the PC screen on the TV,

click on the small TV-like icon in the taskbar

at the bottom right of the PC screen. Your

PC screen appears on your TV screen.

*The Wi-Fi MediaConnect CD-ROM is

supplied with the Wireless USB adapter,

PTA01.

For Wi-Fi integrated models, the CD-ROM

is supplied with the TV.

Stop projecting

To stop projecting, click on the TV icon

again.

Project your PC: Help

To read the Wi-Fi MediaConnect Help,

right-click the program icon in the

notification tray of the PC and select Help.

Specifics

What you need

Caution: To protect the CAM from damage,

insert the CAM according to these

instructions.

You can project high-definition (HD) or

standard-definition (SD) video, depending on

the processing power of your PC.



Due to output content protection,

certain commercial DVD or Blu-ray

discs may not be projected.

The TV shows PC media files with a

small delay.

Notes:



This TV supports CI as well as CI+. CI+

allows service providers to offer

premium HD digital programmes with a

high level of copy protection.



Wi-Fi MediaConnect is available for PC

only.



Refer to the documentation from your

service operator on how to insert a

smart card into the Conditional Access

Module.

Project your PC: PC requirements

Minimum specifications



Windows XP, Vista, Windows 7 (PC

only)



Intel Pentium Core 2 Duo 1.8 GHz

512 MB RAM

200 MB free hard disk space

Wi-Fi 802.11g

Internet connection

Project your PC: PC requirements

Recommended specifications



Windows XP, Vista, Windows 7 (PC

only)



Intel Pentium Core 2 Duo 2.1 GHz

1 GB RAM

200 MB free hard disk space

Wi-Fi 802.11n

Internet connection

1. Switch off the TV.

2. Follow the directions printed on the CAM

and insert the CAM into the Common

Interface at the side of the TV.

3. Push the CAM in as far as it will go, then

wait for the CAM to be activated. This takes

a few minutes.

To prevent digital services from being

deactivated, do not remove the CAM from

the slot when it is in use.

Common interface

What you can do

To watch some digital TV programmes, you

need a Conditional Access Module (CAM).

If a CAM is inserted and subscription fees

are paid, you can watch the channel. The

applications, functions, the content and the

onscreen messages vary for each CAM

service.

Watch CAM services

1. After inserting and activating the CAM,

press

OPTIONS.

2. Select [Common interface], then press

OK.

3. Select the CAM provider and press OK.

The TV menu is in the wrong language:

Change the TV menu to your preferred

language.

For more information, see Set up your TV >

Menu language (Page 40).

6 Troubleshooting

Contact Philips

When you are turning the TV on, off or to

standby, you hear a creaking sound from

the TV chassis:

No action is required. The creaking sound is

due to the normal expansion and

Warning: Do not attempt to repair the TV

yourself. This may cause severe injury,

irreparable damage to your TV or void

your warranty.

contraction of the TV as it cools and warms

up. This does not affect performance.

When the TV is in standby, a startup splash

screen is displayed, then returns to standby

mode:

This is normal behavior. When the TV is

disconnected and reconnected to the power

supply, the startup screen is displayed at the

next startup.

To switch on the TV from standby, press

on the remote control or press any key on

the front of the TV.

If you cannot resolve your problem, refer to

the frequently asked questions (FAQs) for

this TV at www.philips.com/support .

You can also contact Philips Consumer Care

in your country for support. You can find the

contact number in the leaflet that

accompanies the TV.

Take a note of your TV model and serial

number before you contact Philips. These

numbers are printed on the back of the TV

and on the packaging.

General TV

TV channel

The TV does not switch on:

Previously installed channels do not appear

in the channel list:

Make sure that the correct channel list is

selected.

No digital channels were found during the

installation:



Disconnect the power cable from the

power outlet. Wait for one minute then

reconnect it.



Make sure that the power cable is

securely connected.

Make sure that the power switch at the



Make sure that the TV supports DVB-T,

DVB-C or DVB-S in your country.

Make sure that the antenna is properly

connected and the correct network is

selected.

base or back of the TV is switched on.

The TV does not respond to remote

control or front controls when switched

The TV requires some time to start up.

During this time, the TV does not respond

to the remote control or front controls. This

is normal behavior.



The standby light on the TV blinks red:

Disconnect the power cable from the power

outlet. Wait until the TV cools down before

you reconnect the power cable. If the

blinking reoccurs, contact Philips Consumer

Care.

You forgot the code to unlock the child

lock feature:

Enter ‘8888’.

An "e-sticker" banner displaying

information appears on the TV display:

The TV is in [Shop] mode. To remove the

e-sticker, set the TV to [Home] mode, then

restart the TV. Position the TV > Location

(Page 9).

Picture

The TV is on, but there is no picture or the

picture is distorted:



Make sure that the antenna is properly

connected to the TV.

Make sure that the correct device is

selected as the display source.

Make sure that the external device or

source is properly connected.

The computer display on the TV is not

stable:



Make sure that your PC uses the

supported resolution and refresh rate.

See Product specifications > Display

resolutions (Page 59).

There is sound but no picture:

Make sure that the picture settings are set

correctly.



Set the TV picture format to

[Unscaled].

There is poor TV reception from an

antenna connection:

Sound



Make sure that the antenna is properly

connected to the TV.

There is a picture but sound quality is

poor:

If no audio signal is detected, the TV

automatically switches the audio output off

— this does not indicate malfunction.



Loud speakers, unearthed audio devices,

neon lights, high buildings and other

large objects can influence reception

quality. If possible, try to improve the

reception quality by changing the

antenna direction or moving devices

away from the TV.



Make sure that all cables are properly

connected.

Make sure that the volume is not muted

or set to zero.

Make sure that the TV speakers setting

is selected. Press ADJUST, select

[Speakers], and then select TV.



If reception on only one channel is

poor, fine-tune this channel.

There is poor picture quality from

connected devices:



Make sure that the devices are

connected properly.

Make sure that the picture settings are

set correctly.



Make sure that the TV audio output is

connected to the audio input on the

HDMI-CEC enabled or EasyLink

compliant home theatre device. Sound

should be heard from the home theatre

speakers.



The TV did not save your picture settings:

Make sure that the TV location is set to

Home. You can change and save settings in

this mode.

The picture does not fit the screen; it is

too big or too small:

There is a picture but the sound quality is

poor:

Make sure that the sound settings are

correctly set.

Try a different picture format.

There is a picture but sound comes from

one speaker only:

Make sure that sound balance is set to the

centre.

The picture position is incorrect:

Picture signals from some devices may not fit

the screen correctly. Check the signal output

of the device.

The picture from broadcasts is scrambled:

You may need a Conditional Access Module

to access content. Check with your service

operator.

HDMI

USB

There are problems with HDMI devices:

USB device content is not displayed:



Note that HDCP (High-bandwidth

Digital Content Protection) support can

delay the time taken for a TV to display

content from a HDMI device.

If the TV does not recognise the HDMI

device and no picture is displayed,

switch the source from one device to

another and back again.

If there are intermittent sound

disruptions, make sure that output

settings from the HDMI device are

correct.

If you use an HDMI-to-DVI adapter or

HDMI to DVI cable, make sure that an

additional audio cable is connected to

AUDIO L/R or AUDIO IN (mini-jack

only).



Make sure that the USB storage device

is set to Mass Storage Class compliant,

as described in the storage device's

documentation.

Make sure that the USB storage device

is compatible with the TV.

Make sure that the audio and picture

file formats are supported by the TV.



Audio and picture files do not play or

display smoothly:

The transfer performance of the USB

storage device may limit the data transfer

rate to the TV which causes poor playback.

Network

Net TV does not work

You cannot use EasyLink features:

Make sure that your HDMI devices are

HDMI-CEC compatible. EasyLink features

only work with devices that are HDMI-CEC

compatible.

If the connection to the router is properly

set up, check the router connection to the

Internet.

Browse PC or Net TV access is slow.

Refer to your router's user manual for

information on transfer rate and other

factors of signal quality.

You need a high-speed Internet connection

for your router.

If an HDMI-CEC compliant audio device is

connected to the TV and the TV does not

display any mute or volume icon when the

volume is muted, increased or decreased.

This behaviour is normal when an HDMI-

CEC audio device is connected.

Wireless network is distorted or not

found.



Make sure that the wireless network is

not disturbed by microwave ovens,

DECT phones or other neighbouring

Wi-Fi devices.



If the wireless network is not working,

try a wired network connection.

For DLNA connection, click on How

does sharing change firewall settings in

the Media Sharing window for the Help

file.

Sound

7 Product

specifications



Output power (RMS) @ 30% THD:

- For 32 to 40-inch models: 24 W

- For 46 to 55-inch models: 28 W

Incredible Surround



Clear Sound

Power and reception

Dynamic Bass Enhancement

Mono / Stereo / NICAM

Power



Mains power: AC 220-240 V~, 50-60

Standby power: < 0.15 W

Ambient temperature: 5 to 40 degree

Celsius

Display resolutions



Computer formats - HDMI

(Resolution - refresh rate)

640 x 480 - 60 Hz

800 x 600 - 60 Hz

1024 x 768 - 60 Hz

1280 x 1024 - 60 Hz

1360 x 768 - 60 Hz

1600 x 1200 - 60 Hz

1920 x 1080 - 60 Hz



For power consumption, see the

product specifications at

www.philips.com/support .

Reception



Antenna input: 75 ohm coaxial (IEC75)

TV system: DVB COFDM 2K/8 K,

Video playback: NTSC, PAL, SECAM

Digital TV: MPEG-4, DVB-T

(Terrestrial), *DVB-T2, DVB-C (Cable),

*DVB-S/S2 (Satellite).

Computer formats - VGA

(Resolution - refresh rate)

640 x 480 - 60 Hz

800 x 600 - 60 Hz

1024 x 768 - 60 Hz

1280 x 1024 - 60 Hz

1360 x 768 - 60 Hz

1600 x 1200 - 60 Hz

1920 x 1080 - 60 Hz



Tuner bands: VHF, UHF, S-Channel,

Hyperband

Available on certain models only.

Display and sound

Video formats

(Resolution - refresh rate)

Picture/Display



Display type: LCD Full HD W-UXGA

Diagonal size:

- 81 cm/32 inch

480i - 60 Hz

480p - 60 Hz

576i - 50 Hz

- 94 cm/37 inch

576p - 50 Hz

- 102 cm/40 inch

- 117 cm/46 inch

- 140 cm / 55 inch

720p - 50Hz, 60 Hz

1080i - 50Hz, 60 Hz

1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz



Aspect ratio: Widescreen 16:9

Panel resolution: 1920 x 1080 p, 100



Pixel Plus HD picture enhancement

1080 p 24 / 25 / 30 / 50 / 60 Hz

processing



100 Hz LCD



Ethernet UTP5

Multimedia

Supported image files



JPEG (*.jpg)

Supported multimedia connections



USB (FAT or DOS-formatted; Mass

Storage Class compliant with 500mA

only)



SD card slot

Supported audio/video files

Multimedia file names must not exceed 128 characters.

Supported audio/video files

Multimedia file names must not exceed 128 characters.



DiXiM (for Microsoft Windows XP)

Macrovision Network Media Server (for

Microsoft Windows)

Fuppes (for Linux)

uShare (for Linux)

Supported DLNA-compliant media server

software



Windows Media Player (for Microsoft

Windows)

Twonky Media (for Microsoft Windows

and Mac OS X)

Sony Vaio Media Server (for Microsoft

Windows)



TVersity (for Microsoft Windows)

Nero MediaHome

Bottom (PFL66x6T)

Connectivity



Network: Ethernet

DIGITAL AUDIO OUT: Optical

HDMI 2: HDMI

HDMI 1 ARC: HDMI Audio Return

Channel

Rear (PFL66x6H and PFL66x6K)



EXT 1 (RGB/CVBS): SCART

EXT 2: Component video (Y Pb Pr),

Audio (L/R)



AUDIO IN: DVI/VGA stereo 3.5-mm

mini-jack



SERV.U: Service port

AUDIO IN: DVI/VGA stereo 3.5-mm

mini-jack



Antenna: 75 ohm coaxial

VGA: PC input



SAT (DVB-S): Available on certain

models only

Side (PFL66x6H and PFL66x6K)

Rear (PFL66x6T)



CI: Common Interface

SD card

USB

Headphones: Stereo 3.5-mm mini-jack

HDMI



EXT 1 (RGB/CVBS): SCART

EXT 2: Component video (Y Pb Pr),

Audio (L/R)



SERV U: Service port

Headphones: Stereo 3.5-mm mini-jack

Side (PFL66x6T)



CI: Common Interface

SD card

USB

Bottom (PFL66x6H and PFL66x6K)



Network: Ethernet

DIGITAL AUDIO OUT: Coaxial

HDMI 2: HDMI

HDMI 1 ARC: HDMI Audio Return

Channel

HDMI

Dimensions



Antenna: 75 ohm coaxial

VGA: PC input

Note: Dimensions and weights are

approximate values only. Design and

specifications are subject to change without

notice.

Legend for TV dimensions

The legends used to indicate the TV

dimensions are as follows:

( ) : 81 cm / 32 inch TV

{ } : 94-cm/37-inch TV

[ ] : 102 cm / 40 inch TV

(( )) : 117-cm/46-inch TV

{{ }} : 140 cm / 55 inch TV

Take a note of the legend that corresponds

to your TV. Then, go to the next page to

view the dimensions.

Use your TV legend to note the weight of the TV without the stand.

Use your TV legend to note the weight of the TV with stand.

Use your TV legend to note the dimensions of your TV (with and without the stand).

Use your TV legend to note the thickness of your TV (with and without the stand).

Help version

UMv 3139 137 04122 - 20110325

8 Index

demo - 41

devices, add - 17

devices, watch - 17

digital channels - 39

digital channels, subtitles - 31

digital radio - 15

dimensions - 61

display - 59

age rating - 31

analogue channels, fine-tune - 39

analogue channels, subtitles - 31

audio language - 37

CAM, enable - 55

display resolution - 59

DLNA - 19

CAM, insert - 55

CAM, see Conditional Access Module - 55

care - 7

EasyLink, controls - 34

channel list - 15

EasyLink, enable - 34

channels, favourites - 15

channels, fine-tune (analogue) - 39

channels, hide or unhide - 38

channels, install (automatic) - 38

channels, install (manual) - 39

channels, reinstall - 40

channels, rename - 37

channels, reorder - 37

channels, switch - 15

channels, update - 38

child lock - 30

EasyLink, features - 33

EasyLink, RC key forward - 34

EasyLink, TV speakers - 34

Electronic Programme Guide - 15

end of use - 8

environment efforts - 7

environment, recycle - 8

EPG, Electronic Programme Guide - 15

EPG, menu - 15

clock - 30

factory settings - 37

common interface - 55

computer, play files - 21

computer, see PC - 52

Conditional Access Module - 55

connect device - 44

favourites list, add - 15

HbbTV - 25

HbbTV, block reception - 25

HDMI - 43

connect, PC - 51

connect, USB - 17

HDMI ARC - 43

connectors - 4

hearing impaired - 32

help, onscreen - 10

high-definition (HD), content - 5

contact information, on Internet - 10

contact Philips - 10

controls - 11

home menu - 3

home mode - 9

recording, USB - 27

recycle - 7

reinstall TV - 42

install channels - 38

install channels (automatic) - 38

install channels (manual) - 39

remote control - 11

remote control, batteries - 12

remote control, onscreen - 34

remote control, overview - 11

rename channels - 37

reorder channels - 37

kensington lock - 9

language, menu - 40

location, home or shop - 9

safety - 6

Scenea, enable - 31

Scenea, see screen saver - 32

screen saver - 31

media server software (Mac) - 20

media server software (PC) - 20

multimedia - 60

SD card, format - 23

SD card, memory size - 23

settings, assistant - 36

settings, picture - 36

settings, sound - 36

shop mode - 9

multimedia, play files - 17

mute TV speakers - 34

Net TV, browse - 21

sleeptimer - 30

smart picture - 16

online video, rent - 23

smart sound - 36

Smart USB - 26

software, digital update - 41

software, Internet update - 41

software, version - 41

sound settings - 36

subtitle, analogue - 31

subtitle, digital - 31

subtitle, language - 31

switch TV on, off - 14

Pause live broadcast - 27

PC, connect - 51

PC, display resolutions - 59

picture format - 36

picture settings - 36

Pixel Plus link - 35

placement, stand or wall mount - 8

position the TV - 8

power - 59

teletext 2.5 - 29

teletext, digital text - 29

teletext, dual screen - 29

teletext, enlarge - 29

teletext, language - 29

teletext, search - 29

teletext, subpages - 29

universal access, enable - 32

universal access, hearing impaired - 32

universal access, visually impaired - 32

USB recording - 27

visually impaired - 32

volume - 11

wall mount - 9

wallpaper - 32

Wi-Fi MediaConnect - 54

Wireless LAN ready - 53

Pixel characteristics

Notice

This LCD product has a high number of

colour pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly

on the screen.This is a structural property of

the display (within common industry standards)

and is not a malfunction.

rights reserved.

Speciﬁcations are subject to change without

notice.Trademarks are the property of

Koninklijke Philips Electronics N.V or their

respective owners. Philips reserves the right

to change products at any time without being

obliged to adjust earlier supplies accordingly.

The material in this manual is believed

adequate for the intended use of the system.

If the product, or its individual modules or

procedures, are used for purposes other than

those speciﬁed herein, conﬁrmation of their

validity and suitability must be obtained. Philips

warrants that the material itself does not

infringe any United States patents. No further

warranty is expressed or implied.

Philips cannot be held responsible either for any

errors in the content of this document or for

any problems as a result of the content in this

document. Errors reported to Philips will be

corrected and published on the Philips support

website as soon as possible.

Open source software

Philips Electronics Singapore Pte Ltd hereby

offers to deliver, upon request, a copy of the

complete corresponding source code for the

copyrighted open source software packages

used in this product for which such offer is

requested by the respective licences.This offer

is valid up to three years after product purchase

to anyone in receipt of this information.To

obtain the source code, please contact open.

source@philips.com. If you prefer not to use

email or if you do not receive a conﬁrmation

receipt within a week after mailing to this

email address, please write in English to “Open

Source Team, Philips Intellectual Property &

Standards, P.O. Box 220, 5600 AE Eindhoven,

The Netherlands”. If you do not receive timely

conﬁrmation of your letter, please send an

email to the email address above.The texts

of the licences and acknowledgements for

open source software used in this product are

included on a separate leaﬂet.

Terms of warranty

•

Risk of injury, damage to TV or void of

warranty! Never attempt to repair the

TV yourself.

•

Use the TV and accessories only as

intended by the manufacturer.

The caution sign printed on the back of

the TV indicates risk of electric shock.

Never remove the TV cover. Always

contact Philips Customer Support for

service or repairs.

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures

and sells many products targeted at consumers

which, like any electronic apparatus, in

general have the ability to emit and receive

electromagnetic signals.

One of Philips’ leading Business Principles is to

take all necessary health and safety measures for

our products, to comply with all applicable legal

requirements and to stay well within the Electro

Magnetic Field (EMF) standards applicable at the

time of producing the products.

Philips is committed to develop, produce and

market products that cause no adverse health

effects. Philips conﬁrms that if its products are

handled properly for their intended use, they

are safe to use according to scientiﬁc evidence

available today.

•

Any operation expressly prohibited in

this manual, or any adjustments and

assembly procedures not recommended

or authorised in this manual shall void the

warranty.

Philips plays an active role in the development

of international EMF and safety standards,

enabling Philips to anticipate further

developments in standardisation for early

integration in its products.

DLNA , the DLNA Logo and DLNA

CERTIFIED are trademarks, service marks

or certiﬁcation marks of the Digital Living

Network Alliance.

EMC regulation

•

In order to maintain conformity to the

Electro Magnetic Compatibility (EMC)

directive (2004/108/EC), the mains plug

on this product must not be detached

from the mains cord.

HDMI, the HDMI logo and High-Deﬁnition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC

in the United States and other countries.

•

If the apparatus does not recover in

DLNA/Net TV mode, user intervention

is required.

Mains fuse (UK only)

ThisTV is ﬁtted with an approved moulded

plug. Should it become necessary to replace

the mains fuse, this must be replaced with a

fuse of the same value as indicated on the plug

(example 10A).

Kensington and Micro Saver are registered

US trademarks of ACCO World corporation

with issued registrations and pending

applications in other countries throughout the

world.

All other registered and unregistered

trademarks are the property of their

respective owners.

Remove fuse cover and fuse.

The replacement fuse must comply with

BS 1362 and have the ASTA approval

mark. If the fuse is lost, contact your

dealer in order to verify the correct type.

Reﬁt the fuse cover.

SDHC Logo is a trademark of SD-3C, LLC.

Declaration of Conformity

Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or other

countries.

Hereby, Philips Innovative Applications N.V.

declares that this television is in compliance

with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

A copy of the Declaration of Conformity is

available at: http://www.philips.com/suppo r t

Manufactured under licence from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

Info for UK only.

Information about how to

re-tune your TV during the

digital TV switchover.

^{Television in the UK is going digital, bringing us}How the switchover affects

all more choice and new services. Starting in

late 2007 and ending in 2012, television

your TV equipment:

services in the UK will go completely digital, TV

region by TV region.

Your new TV has a digital tuner built in, which

means it is ready to receive the Freeview signal

by simply plugging it into your aerial socket

(check if you can get digital TV through your

aerial now, or whether you’ll have to wait until

switchover, at www.digitaluk.co.uk).

Please see the next page to find out when your

area switches to digital.

Digital UK is the independent, non-profit

organisation leading the process of digital TV

switchover in the UK. Digital UK provides im-

partial information on what people need to do

to prepare for the move to digital, and when

they need to do it.

When the TV switchover happens in your area,

there are at least two occasions when you will

need to re-tune your TV in order to continue

receiving your existing TV channels, and also to

pick up new ones.

Digital UK, the body leading the digital TV

switchover, will advise you when you need to

re-tune during the switchover.

How to re-tune:

1. Press h on the remote control.

2. Select Setup and press OK.

If you do not re-tune your channels when

advised to do so by Digital UK, you may lose

some or all of your channels until you do

re-tune. You should re-tune your TV every

few months to check for any new channels.

If you choose to connect your TV to satellite or

cable with a digital box then it will not be

affected by switchover, and you won’t need to

re-tune.

3. Select Search for channels and press OK.

4. Select Reinstall channels and press OK.

5. Select your country (UK) and press OK.

6. Select Antenna DVB-T and press OK.

7. Select Start and press OK.

The installation can take several minutes.

When the installation is complete, press OK.

Your TV is now retuned.

If you have any questions, please contact your

equipment supplier or call Digital UK on …

0845 6 50 50 50 or visit www.digitaluk.co.uk

If you are missing any channels, it may be

that they are not available in your area, or

that your aerial needs upgrading.

When does switchover happen?

Copeland switches on October 17, 2007

The exact date you switch

depends on the transmitter

you are served by. To check

when you switch, go to

Digital UK’s postcode

checker on

www.digitaluk.co.uk

Check your ITV news service

or look at Teletext page 106

to see what TV region you’re

in.

Visit us at digitaluk.co.uk

Call us on 0845 6 50 50 50^†

Calls charged at BT rate of 3p per minute daytime and

1p per minute evenings and weekends. Rates may vary

for calls from non-BT lines.

20100422

Contact information

België/ Belgique

0800 80 190 Gratis/Gratuit

chat www.philips.com/support

Latvia

80002794 local

Sverige

08 5792 9100 Lokalsamtal

Lithuania

880030483 local

Suisse/Schweiz/Svizzera

0800 002 050

България

Schweizer Festnetztarif/Tarif réseau

fixe France

00800 11 544 24

Luxemburg/Luxembourg

080026550

Česká republika

Suomi

Ortsgespräch/Appel local

800 142 840 Bezplatný hovor

09 2311 3415 paikallispuhelu

Magyarország

Danmark

Türkiye

06 80 018 189 Ingyenes hívás

3525 8759 Lokalt opkald

0800 261 3302 Şehiriçi arama

chat www.philips.com/support

Nederland

United Kingdom

0800 023 0076 Gratis nummer

Deutschland

0870 911 0036 toll free

0800 000 7520 (kostenfrei)

Norge

chat www.philips.com/support

Українська

22 70 81 11 Lokalsamtale

0-800-500-697

Ελλάδα

0 0800 3122 1280

Κλήση χωρίς χρέωση

Österreich

0800 180 016

Polska

España

00800 3111 318

900 800 655Teléfono local gratuito

solamente para clientes en España

Portugal

chat www.philips.com/support

0800 780 902 Chamada Grátis

Estonia

Россия

8000100288 kohalik kõne tariifi

(495) 961 1111

8800 200 0880

France

(бесплатный звонок по России)

0805 025 510 numéro sans frais

chat www.philips.com/support

România

0800-894910 Apel gratuit

0318107125 Apel local

Hrvatska

0800 222778 free

Србија

Ireland

+381 114 440 841 Lokalni poziv

South: 1 800 7445477

North: 0 800 331 6015

Slovensko

0800 004537 Bezplatný hovor

Italia

800 088774 NumeroVerde

Slovenija

080080254 lokalni klic

Қазақстан

+7 727 250 66 17 local

This information is correct at the time of print. For updated information, see www.philips.com/support.

Document order number 313913704122

PYLE Audio PLDCS400 User Manual
Philips VKR 6880 User Manual
Philips AQ 6688 User Manual
Panasonic HC V100 User Manual
Panasonic Camcorder DMC TZ6 User Manual
Olympus Zuiko Digital ED150mm f20 User Manual
Nikon Monarch X 25 10x44 SF IL User Manual
Kodak D 45 User Manual
JVC PICSIO GC FM1 User Manual
JVC KD SH1000J User Manual