This product is eligible for the AVCCAM
3 Year Warranty Repair Program. For
details, see page 5 of vol.1.
Operating Instructions
Vol.2
Memory Card Camera-Recorder
Model No.
AG-AF100P
2
Volume
Note that Operation Instructions Vol.2 describes advanced
operations of the Memory Card Camera-Recorder.
For instructions on basic operations of the Memory Card Camera-
Recorder, refer to Operating Instructions Vol.1 (printed documents)
contained in the supplied CD-ROM.
Before operating this product, please read the instructions carefully and save this manual for
future use.
ENGLISH
VQT3M18A (E)
D
M1210AT0 -FJ
Printed in Japan
Charging the built-in battery/
Menu
Setting the time code ...........................25
Recharging the built-in battery ........................ 25
Setting the time code....................................... 25
Specifying the time code (TC PRESET).......... 25
Setting user information .................................. 27
Setup menu list.............................................51
SCENE FILE screen........................................ 51
SW MODE screen........................................... 53
RECORDING SETUP screen.......................... 56
TC/UB SETUP screen..................................... 57
AV IN/OUT SETUP screen.............................. 58
DISPLAY SETUP screen................................. 59
CARD FUNCTIONS screen ............................ 61
USER FILE screen.......................................... 61
META DATA screen ......................................... 62
OTHER FUNCTIONS screen.......................... 62
PLAY SETUP screen....................................... 64
THUMBNAIL screen........................................ 65
OPERATION screen........................................ 65
Playback
Basic playback operations..........................28
Thumbnail screen.........................................29
Basic thumbnail screen operations ................. 29
Adding shot marks to clips .............................. 31
Select the card slot for playback ..................... 31
Playback settings (PLAY SETUP)................32
Set playback format (PB FORMAT)................. 32
Repeat playback (REPEAT PLAY) .................. 32
Resume playback (RESUME PLAY)............... 33
Set skip method (SKIP MODE) ....................... 33
Thumbnail operations..................................34
Selecting the thumbnail display method
(THUMBNAIL) ............................................. 34
Deleting and protecting clips (OPERATION)... 35
Copying clips (COPY) ..................................... 36
Format card and check clip and
card information (CARD FUNCTIONS)....... 37
Useful playback functions...........................39
Fast forward/rewind......................................... 39
Next/previous clip............................................ 39
Frame-by-frame playback ............................... 40
Adjust volume.................................................. 40
Viewing images on a television ....................... 40
Checking the date and time............................. 40
Reference
Before calling for service.............................66
Updating the firmware
incorporated into the unit ....................70
Cleaning ........................................................71
Storage Precautions.....................................72
How to handle data recorded on
SD Memory Card...................................73
Editing
Connecting external units ...........................41
Headphones.................................................... 41
External microphone ....................................... 41
Computer (non-linear editing/file transfer)....... 42
TV/Monitor....................................................... 42
Nonlinear editing ..........................................44
Displays
Screen displays............................................45
Regular displays.............................................. 45
Main warning displays..................................... 48
Setting the DISPLAY items.............................. 50
3
Shooting in progressive mode
Selecting 1080/30P or 1080/24P in the REC
FORMAT option (Page 51) of the setting menu
SCENE FILE screen enables shooting in
progressive mode.
Note the following when shooting in
progressive mode.
• Set the shutter speed to 1/50 (OFF) for best
results.
• There may be a slight delay to the start
of recording when you use the 24P mode
because 4 frames are recorded at a time.
30P mode:
Shoot 30 frames a second in the progressive
mode.
For output and recording, the 30-frame-per-
second signal is converted to 60-field-per-second
interlace.
This mode gives you high quality images.
30 P A B C D E F G H I J
AoAeBoBeCoCeDoDeEoEe Fo FeGoGeHoHe Io Ie Jo Je
60 i
24P mode:
Shoot 24 frames a second in the progressive
mode.
The video signal will be recorded natively.
However, the external output signal is converted
to a 2:3 format, 60 fps interlaced signal.
24 P A B C D E F G H
AoAeBoBeBoCeCoDeDoDeEoEeFoFe Fo
Ge
Go
H
e
Ho
H
e
60 i
25P mode:
Shoots 25 frames a second in the progressive
mode.
For output and recording of video signal, the
25-frame-per-second image is converted to
50-field-per-second interlace signal.
This mode gives high quality images.
25 P A B C D E F G H I J
AoAeBoBeCoCeDoDeEoEe Fo FeGoGeHoHe Io Ie Jo Je
50 i
4
Shooting techniques for different targets
Self-portrait shooting
Zebra pattern
Images in the LCD monitor when it is turned 180°
for self-portrait shooting may appear unusual.
You can make them appear better by reversing
left and right. Go to the setup menus, DISPLAY
SETUP screen, SELF SHOOT, and select
MIRROR. Shooting in mirror mode has no effect on
what you actually shoot and record.
Press the ZEBRA button in the CAM mode to show
the zebra pattern or marker on the viewfinder and
the LCD monitor so you can check the brightness
of the subject.
Parts that may be whited out through over
exposure are shown as a zebra pattern.
• Very bright
• Reflecting parts
ZEBRA button
BARS
ZEBRA
OIS
EVF DTL
WFM
CH1 SEL
CH2 SEL
(
)
INT
L
INPUT1
INPUT2
INPUT1
INPUT2
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
COUNTER-RESET/TC SET
MIC POWER +48V
You can remove most overexposed parts by
adjusting the iris and shutter speed in the manual
mode to remove the areas with zebra patterns.
The display changes as follows each time you
press the ZEBRA button.
• Images played back by pressing the REC
CHECK button cannot be inverted horizontally.
• Operation status displays during self-portrait
recording
ZEBRA 1 → ZEBRA 2
No display: Cannot record (no card, etc.)
↑
↓
:
Recording in progress, during transition
to the recording pause mode
Recording paused (recording standby)
Warning display
ZEBRA OFF ← MARKER ON
:
:
In the setup menus, DISPLAY SETUP screen,
ZEBRA DETECT1 and ZEBRA DETECT2, set the
brightness for the zebra patterns. (Page 59)
If the ZEBRA DETECT2 item is set to OFF,
ZEBRA2 will not be displayed even if the ZEBRA
button is pressed.
• Only part of the screen display appears.
When [ ] is displayed, turn the LCD monitor
back in the direction of normal recording, and
check what the message says.
• To confirm screen display information on the
viewfinder, turn the LCD monitor to the normal
shooting position.
The zebra pattern you have set appears as a
percentage on the display for about 2 seconds.
The zebra pattern is displayed in the color bar
as well.
5
Shooting techniques for different targets (continued)
Marker
PRE REC
If you press the ZEBRA button while the zebra
pattern is being displayed, a marker appears in
the center of the display (if you have set the setup
menu, DISPLAY SETUP, MARKER to ON).
The brightness of the areas near the screen center
can be checked as a percentage (0% to 99%).
“99%↑” appears if the percentage is over 99.
Record video and audio from three seconds before
the time of the operation to begin recording.
Operation to start
recording
Operation to stop
recording
(Time)
Actual recording
time
PRE REC time
Image level detection area
Marker
Set the PREREC MODE item on the
RECORDING SETUP screen to ON.
PRE-REC will be displayed on the screen.
• When the TCG item on the TC/UB SETUP
screen has been set to REC RUN, the setting
will be automatically changed to FREE RUN.
1
2
99%
Image level
The normal display reappears if you press the
ZEBRA button again.
Press the START/STOP button.
Video and audio from approximately 3 seconds
previously will be recorded.
• Recording of the previous 3 seconds of video
and audio may not be possible if recording is
started immediately in the following cases.
ā Immediately after switching from PB mode
to CAM mode
Checking and displaying shooting status
MENU
EXEC
START/
STOP
PUSH-ENTER
+
2
–
AUDIO MON
MEGA
O.I.S.
ON
ā Immediately after turning power on
ā Immediately after changing to PREREC
MODE item
OFF
DISP/
FUNCTION USER
1
2
MODECHK
OFF
PO.W.ER
ON CAM
PB
MODE
CH2
FOCUS
P
U
S
H
A
U
T
O
A
M
∞
CH1
AUDIO LEVEL
IRIS GAIN WHITE BAL
USER
L
B
M
H
A
PRST
• The thumbnail for clips recorded using the
PREREC function will display the image from
when the START/STOP button was pressed.
DISP/MODE CHK button
Pressing the DISP/MODE CHK button during
recording or while recording is paused will remove
all displays from the screen except the operation
status display, frame display (such as area),
counter, marker, and safety zone display.
Relay function
When the remaining space on an SD card is
insufficient during recording, recording can be
continued using the other SD card slot.
Pressing the DISP/MODE CHK button during
recording or while recording is paused will
remove all displays from the screen except for the
operation status, frame display erea etc., counter,
marker, and safety zone display. Press the button
again to return to the normal display. (Page 50)
This setting will be maintained even if the camera’s
power is turned off by moving the POWER switch to
the OFF position or if the operating mode is changed.
Select ON in the RELAY REC item on the settings
menu RECORDING SETUP screen.
• When the remaining space on an SD card is
insufficient during recording, recording will
automatically be continued using the SD card in
the other slot.
• The relay function is not available when an SD
card that cannot be recorded to is inserted in the
SD card slot.
Pressing the DISP/MODE CHK button while the
thumbnail screen is displayed in PB mode will
display the properties of the selected clip.
(Clips can be selected by moving the cursor with
the Operation lever.)
• The longest possible recording time with this
camera is 12 hours. This cannot be extended
even if the relay function is used.
6
Variable frame rate (VFR)
This camera can perform low speed (undercrank) and high speed (overcrank) recording without the need
for a frame rate converter (the camera must be set to 1080_24p or 1080_30p).
: Valid frames
Camera
24P
24PN
24P mode:
Shoots 24 frames a second in native mode. The images (shot at 24 frames a second) are recorded into 24
frames as the video signal.
• When VFR is set, the INTERVAL REC function, relay recording function, and PRE REC function are
automatically set to OFF, and TCG is automatically set to REC RUN.
• The frame rate cannot be changed during recording.
• VFR shooting is only possible when shooting with REC FORMAT set to 1080_24p, 1080_30p or
1080_25p. VFR shooting does not work in the 720p mode.
The recording frame rate can be set to any one from the 20 frame rates given in the following table.
There is a slight a difference between the displayed recording frame rate and the actual recording frame
rate. Please refer to the table below.
When SYSTEM FREQ is set to 59.94 Hz
Indicated
recording 60 54 48 44 40 36 34 32 30 28 27 26 25 24 22 21 20 18 15 12
frame rate
Actual
recording
frame rate
59.94
53.74
47.54
43.96
39.96
35.97
33.88
31.73
29.97
27.83
27.25
25.97
24.98
23.98
21.98
20.75
19.98
17.63
14.99
11.99
When SYSTEM FREQ is set to 50 Hz
Indicated
recording 50 48 45 42 37 34 32 30 28 27 26 25 24 23 22 21 20 18 15 12
frame rate
Actual
recording
frame rate
50.00
48.08
45.45
41.67
36.76
34.09
31.82
30.00
27.78
26.79
26.04
25.00
24.00
23.08
22.06
20.83
20.00
17.86
15.00
12.50
7
Shooting techniques for different targets (continued)
Native recording
Standard recording
Select 1080/24P recording format from
the REC FORMAT option (page 51) on the
settings menu SCENE FILE screen.
Select 1080/30P recording format from
the REC FORMAT option (page 51) on the
settings menu SCENE FILE screen.
1
1
2
From the OPERATION TYPE option (page
51) on the settings menu SCENE FILE
screen, select FILM CAM, and set the
FRAME RATE (page 51) to an arbitrary
recording frame rate.
From the OPERATION TYPE option (page
51) on the settings menu SCENE FILE
screen, select FILM CAM, and set the
FRAME RATE (page 51) to an arbitrary
recording frame rate.
2
Press the START/STOP button
Start native recording in VFR mode.
Press the START/STOP button.
Start standard recording in VFR mode.
• Although the audio is not recorded, the
sound is output from the AUDIO OUT
terminal, HDMI terminal, and SDI OUT
terminal during setup and during recording.
• During the VFR mode, the camera is set to
manual focus mode.
3
3
• Although the audio is not recorded, the sound
is output from the AUDIO OUT terminal, HDMI
terminal, and SDI OUT terminal during setup and
during recording.
• During the VFR mode, the camera is set to
manual focus mode.
• 2:2 pull down recording will be applied for a
recording frame rate of 30P.
8
Overcrank shooting
Use of Variable Frame Rate (VFR)
Normal speed shooting for movie production
This is a slow motion effect that can be applied
to scenes such as car chases, action, climaxes,
etc. For example, a slow motion effect of 1/2 can
be gained if the VFR recording frame rate is set
to 60fps when recording with the 30P recording
format that specifies the playback frame rate.
1080P progressive movies produce smooth, high
quality slow motion.
When producing videos for screening, a frame
rate of 24fps as used in film projection is standard
(x1). By using the settings below, playback with the
same quality as the film projection is possible. Film
like high quality video can be produced through
1080p progressive and CINELIKE Gamma.
Recording format
(REC FORMAT)
1080P/24P
Recording frame rate
(FRAME RATE)
Recording format
(REC FORMAT)
1080/24P
Recording frame rate
(FRAME RATE)
Less than 25fps*
Less than 32fps*
Less than 26fps*
24 fps*
1080/30P
1080/25P
(native recording)
Normal speed shooting for commercial/drama
production
* The recording frame rate (FRAME RATE) can be
set to one of 20 values. (page 14)
When producing videos for display on television
screen such as HDTV/SDTV broadcast, a frame
rate of 30fps is standard (x1). By using the settings
below, playback with the same quality as broadcast
is possible. Commercials and music videos can be
recorded at film-like high quality, and at a frame
rate suitable for television broadcast.
Recording format
(REC FORMAT)
1080/30P
(2:2 Pull down)
1080/25P
Recording frame rate
(FRAME RATE)
30 fps*
25 fps*
Undercrank shooting
This is a quick motion effect that can be applied
to scenes showing the flow of clouds, people
standing in the middle of crowds, and kung fu, etc.
For example, a quick motion effect of x2 can be
gained if the VFR recording frame rate is set to
12fps when recording with the 24P recording
format that specifies the playback frame rate.
Recording format
(REC FORMAT)
1080/24P
Recording frame rate
(FRAME RATE)
Less than 22fps*
Less than 28fps*
Less than 24fps*
1080/30P
1080/25P
9
Shooting techniques for different targets (continued)
Shooting using the FUNCTION knob
Press the FUNCTION knob again.
• The white frame turns yellow.
• When the frame is yellow, the FUNCTION
knob function set via the MENU operates in
the area inside the frame.
• Pressing the FUNCTION knob once more
returns the yellow frame to the white frame.
• Switching AUTO/MANUAL for FOCUS/IRIS
is normally carried out in the same way.
• The central luminance function does not
operate when the area luminance display is
operating.
• If the FUNCTION knob is held down for more
than 2 seconds, the frame disappears and
the area function is switched off.
3
The following types of recording can be carried out
using the FUNCTION knob.
• Area auto focus function
Operates auto focus within an area frame
selected using the FUNCTION knob.
• Area auto iris function
Automatically adjusts the iris value within an area
frame selected using the FUNCTION knob. This
function cannot be set when the FACE DETECT
function has been set.
• Area luminance display
Displays an averaged luminance level within an
area frame selected using the FUNCTION knob.
Select the function from the FUNCTION
KNOB option (page 53) on the settings
menu SW MODE screen.
FOCUS: Area focus function and area focus
bar function (during MENU setting)
1
Move the FUNCTION knob up and down,
and right and left.
• The white frame changes position. Move the
frame to the area you wish to select.
4
IRIS:
Area iris function and area iris meter
function (during MENU setting)
Area luminance display
• The area function does not operate during face
detection.
YGET:
• The area function exits when the power switch
is set to OFF or when the camera is switched
to playback mode.
• Auto focus and auto iris may not be available
depending on lens used.
• The area luminance, FOCUS BAR, and IRIS
METER functions are available regardless of
the lens used.
FOCUS/IRIS:
Simultaneous operation of the area
focus function and area iris function,
simultaneous operation of the area
focus bar function/area iris meter
function (during MENU setting)
FOCUS/YGET:
Simultaneous operation of area
focus function and area luminance
display, simultaneous operation
of area focus bar function (during
MENU setting)
Press the FUNCTION knob.
• A white frame is displayed.
2
• There is no change in the operation of the
camera other than the display of the frame.
10
Optical Image Stabilizer
Using the USER buttons
Use the Optical Image Stabilizer (OIS) to reduce
the effects of camera shake when shooting by
hand.
You can allocate one of thirteen features to each of
the three USER buttons.
Use these buttons to change shooting settings
quickly or add effects to the images you are
shooting.
Press the OIS button to turn the function on and
off.
appears on the viewfinder and the LCD
monitor when this function is on. Turn the function
off when using a tripod for more natural images.
The following features are allocated to the buttons
at the time of shipping.
USER1: FA
BARS
ZEBRA
OIS
USER2: ATW LOCK
USER3: REC CHECK
EVF DTL
WFM
CH1 SEL
CH2 SEL
(
)
INT
L
INP
INP
INPUT1
INPUT2
For details, see the setup menus, SW MODE
screen, USER1 SW to USER3 SW. (Page 55)
If you press a USER button to which one of the
functions has been assigned, and then turn OFF
the power or change the mode during operation of
the USER button function, the effect added to the
image will not be retained.
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
COUNTER-RESET/TC SET
MIC POWER +48V
• For lenses that have an OIS button, only the lens
button is active and the button on the camera is
deactivated. Also, some lenses do not have an
OIS function.
• This function will not be as effective when the
vibration is severe or when tracking a moving
subject.
Backlight compensation
Press the USER button you have allocated to the
BACKLIGHT feature when shooting subjects lit
from the back.
Adding effects to images
BACK appears on the screen.
Backlight compensation adjusts the iris so the
subject doesn’t come out dark.
Press the same USER button to turn the feature
off. (In the manual iris mode, the iris status is
retained at the corresponding point even when
backlight compensation is canceled.)
Press the USER button you have allocated to the
BLACKFADE or WHITEFADE feature to add fading
effects to your images. The button’s function is
forcibly canceled during playback or REC CHECK
and also when thumbnails are displayed.
BLACKFADE:
Press the button to fade out to black. Audio also
fades out. Fade-in starts after fade-out, when
the button is released.
• The backlight compensation function does not
operate with lenses in which AUTO IRIS is not
functioning.
WHITEFADE:
Press the button to fade out to white. Audio also
fades out. Fade-in starts after fade-out, when
the button is released.
Color bars
Press the BARS button in the CAM mode to output
a color bar screen to a television or monitor so you
can adjust them. Press the button again to turn the
feature off.
• While the color bar is displayed, a test tone of
1 kHz will be output from the headphone terminal
or the AUDIO OUT terminal. There will be no
speaker output.
• The color bar can be recorded by pressing the
START/STOP button.
• The color bar display is canceled when the power
is turned off.
11
Shooting techniques for different targets (continued)
Wave form monitor function
Adjusting the volume while shooting
An image wave form can be displayed on the LCD
monitor by pressing the WFM button while in CAM
mode.
Adjusting the volume
AUDIO MON/ADV
Press the button again to return to the normal
display.
MENU
EXEC
START/
STOP
PUSH-ENTER
+
2
–
• Switching the wave form display, vector display,
and wave/vector display is possible from the
WFM item (page 55) in the SW MODE screen of
the settings menu.
AUDIO MON
MEGA
O.I.S.
ON
OFF
DISP/
PO.W.ER
ON CAM
PB
MODE
CH2
FOCUS
P
U
S
H
A
U
T
O
FUNCTION USER
1
2
MODECHK
OFF
A
M
∞
CH1
AUDIO LEVEL
IRIS GAIN WHITE BAL
USER
L
B
M
H
A
PRST
• Wave forms will not be displayed in the
viewfinder.
• Wave forms cannot be recorded.
• While wave forms are displayed, use the
viewfinder as well because a part of the recording
screen and screen display will be hidden by wave
forms.
If you are monitoring the sound through
headphones while shooting, you can adjust the
volume with the AUDIO MON/ADV buttons.
• To adjust the recording level. (Page 18)
• Volume adjustments will be memorized if the
power is turned off by moving the POWER switch
to the OFF position.
12
Shot mark function
LAST CLIP function
The marks attached to the thumbnails of clips
are called shot marks. On the thumbnail screen
monitor you can select only those clips with a
shot mark and display them or play them back.
During recording, when you press the USER
button to which the SHOT MARK function has
been allocated, MARK ON appears in the LCD
monitor or the viewfinder, and a shot mark is set
for the thumbnail of the clip being recorded. If you
press the button again, the shot mark is released.
You can also set or release the shot marks by
performing the thumbnail operations for clips.
(Page 31)
The most recently recorded clip can be deleted at
the touch of a button by allocating the LAST CLIP
function to any of the USER 1 - 3 buttons.
Press the USER button allocated for the LAST
CLIP function to display YES/NO on the screen.
Select YES to delete the most recently recorded
clip.
• Select NO not to delete the clip.
• If the camera has been switched to PB mode or
the recording format has been changed since
recording was completed, clips cannot be deleted
even if the button is pressed. Clips also cannot
be deleted if the power has been switched off
and back on again.
• Clips cannot be deleted even if the button is
pressed if the memory card has been removed
and reinserted since recording was completed.
However, note that you cannot set or release shot
marks during playback.
• INVALID appears when you cannot set or release
shot marks.
Index recording
CAPTURE function
This function allows you to add an index at a
certain point of a clip during the recording or
playback.
If the CAPTURE feature is assigned to any of the
USER 1 – 3 buttons, still images can be shot.
Press the USER button allocated to the INDEX
function during recording to record an index signal
at this point of the clip. (Pages 11, 55)
Indexes may also be added during playback, and it
is also possible to select only clips with indexes for
display or playback. (Pages 34, 35)
• The number of recorded pixels and quality of
the still images cannot be changed.
• This function does not operate when a movie
is being recorded, or when the PRE REC
mode is in use.
• The SD memory card used for recording is the
same as that used for video recording.
• Up to 100 indexes can be recorded for one
clip.
• When the number of indexes exceeds 100,
INVALID is displayed, and no further indexes
can be added even when the steps for adding
indexes are taken.
• When repeatedly adding indexes, leave a gap
of at least one second between adding one
index and the next. If indexes are added with
a gap of less than one second between them,
only the first operation will be valid.
13
Adjusting the shutter speed
Using the SHUTR/F.RATE dial
Setting the SYNCRO SCAN
Select SYNCRO SCAN from the SHUTTER
settings.
1
DIAL SELECT button
SHUTR/F.RATE dial
Select the SYNCRO SCAN function with the
DIAL SELECT button.
2
3
Turn the SHUTR/F.RATE dial.
• The SYNCRO SCAN shutter speed can be
set.
Press the DIAL SELECT button.
• The role of the SHUTR/F.RATE dial changes in
the following order.
SHUTTER → SYNCRO SCAN → FRAME RATE
→ DIAL LOCK → SHUTTER →
• SYNCRO SCAN can be selected when the
SHUTTER is set to SYNCRO SCAN. FRAME
RATE can be selected in the FILM CAM mode
when the REC FORMAT is 1080/24P, 30P, and
25P.
• The speed of change increases when turning
the SHUTR/F.RATE while holding it down.
• SYNCRO SCAN can also be set from the
SYNCRO SCAN item in the SCENE FILE
screen of MENU settings.
Setting format differs depending on the MENU-
SCENE FILE-OPERATION TYPE.
FILM CAM: angle display (180.0d etc.)
VIDEO CAM: speed display (1/48.0 etc.)
To prevent incorrect operation, it is
recommended that you selecting DIAL LOCK
using the DIAL SELECT button after setting.
FRAME RATE setting
Select the FRAME RATE function with the
DIAL SELECT button.
1
Setting the SHUTTER
Select the SHUTTER function with the DIAL
SELECT button.
1
Press the SHUTR/F.RATE dial.
The camera is in VFR mode.
2
• The FRAME RATE can be set by turning the
SHUTR/F.RATE dial.
Press the SHUTR/F.RATE dial.
• The shutter will turn ON/OFF.
2
• FRAME RATE can also be set from the
FRAME RATE item in the SCENE FILE
screen of MENU settings.
• The shutter speed is changed in the order
shown on the following page by turning the
SHUTR/F.RATE dial when the shutter is ON.
• Remember that the faster the shutter speed,
the lower the sensitivity.
• Focusing on the subject would take longer if
the shutter speed is reduced. It is therefore
recommended that the unit be secured to a
tripod, etc. during shooting.
• Under the lighting of electric discharge tubes
such as fluorescent lamps, horizontal bands
may appear on the screen. Adjusting the
shutter speed may improve this condition.
• A subject that quickly crosses the camera may
appear distorted when shot. This is caused due
to the signal reading system of the imaging
element (MOS sensor), and is not a defect.
• At slow shutter speeds (1/2 to 1/15), white,
red, green, or blue dots may appear on the
screen. However, this is not a defect.
• Before using the FRAME_RATE function, it
is necessary for the MENU-SCENE FILE-
OPERATION TYPE to be set to FILM CAM,
and the MENU-SCENE FILE-REC FORMAT
to be set to PH1080/24P or PH1080/30P (or
PH1080/25P).
• The FRAME RATE function cannot be set
when SDI 24PsF is set to ON in the AV IN/
OUT SETUP screen of MENU settings.
• When the FRAME RATE function is set to
ON, the camera is automatically set to manual
focus.
14
When SYSTEM FREQ = 59.94Hz /OPERATION TYPE = FILM CAM
1080/60i, 720/60P
Normal (OFF) 1/60
SYNCRO SCAN
1/2000
1/100
1/500
1/120
1/250
1/1000
1080/30P, 720/30P
Normal (OFF) 1/50
SYNCRO SCAN
1/2000
1/30
1/1000
1/60
1/500
1/120
1/250
1080/24P, 720/24P
Normal (OFF) 1/50
SYNCRO SCAN
1/2000
1/24
1/1000
1/120
1/250
1/60
1/500
SYSTEM FREQ = 50Hz /OPERATION TYPE = FILM CAM
1080/50i, 720/50P
Normal (OFF) 1/50
SYNCRO SCAN
1/2000
1/60
1/500
1/120
1/250
1/1000
1080/25P, 720/25P
Normal (OFF) 1/50
SYNCRO SCAN
1/2000
1/25
1/1000
1/120
1/250
1/60
1/500
SYSTEM FREQ = 59.94Hz /OPERATION TYPE = VIDEO CAM
1080/60i, 720/60P
Normal (OFF) 1/60
SYNCRO SCAN
1/2000
1/2
1/1000
1/4
1/500
1/8
1/250
1/15
1/30
1/120
1/100
1080/30P, 720/30P
Normal (OFF) 1/50
SYNCRO SCAN
1/2000
1/2
1/1000
1/4
1/500
1/8
1/250
1/15
1/30
1/60
1/120
1080/24P, 720/24P
Normal (OFF) 1/50
SYNCRO SCAN
1/2000
1/2
1/1000
1/3
1/500
1/6
1/250
1/12
1/24
1/60
1/120
SYSTEM FREQ = 50Hz /OPERATION TYPE = VIDEO CAM
1080/50i, 1080/25P, 720/50P, 720/25P
Normal (OFF) 1/50
SYNCRO SCAN
1/2
1/3
1/6
1/250
1/12
1/25
1/60
1/120
1/2000
1/1000
1/500
15
Adjusting the shutter speed (continued)
Synchro scan
The syncro scan shutter speed used when
shooting screens such as a TV screen or computer
monitor is set using the SHUTR/F RATE dial (page
14) or the SYNCRO SCAN option on the settings
menu SCENE FILE screen. (page 51)
• Adjust the shutter speed to match the frequency
of the television or computer monitor to minimize
the horizontal noise that appears when shooting
such subjects.
• By switching to progressive mode you can also
shoot PAL system television screens.
• If the set value of the SYNCRO SCAN item of
settings menu is displayed in gray, it cannot
be used with the current recording format. This
function will only operate for preset values for
each recording format, as listed below.
60i/60P mode:
30P mode:
1/60
1/30
You can change the progressive mode in the
setup menu with REC FORMAT in the SCENE
FILE screen. (Page 51)
16
Switching Audio Input
During shooting, you can record up to two
channels of sound. You can also switch the input
sound to be recorded on each of the channels to
the built-in microphones, external microphones or
audio equipment connected to camera.
Using the built-in microphone
Switch the CH1 SELECT switch to INT (L).
• Audio from the built-in microphone Lch is
1
recorded to audio channel 1.
Switch the CH2 SELECT switch to INT (R).
• Audio from the built-in microphone Rch is
recorded to audio channel 2.
CH1 SELECT switch
CH2 SELECT switch
2
BARS
ZEBRA
OIS
EVF DTL
WFM
CH1 SEL
CH2 SEL
(
)
INT
L
INPUT1
INPUT2
INPUT1
INPUT2
INPUT 1/2
(MIC POWER +48V)
switches
Using an external microphone and
audio equipment
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
COUNTER-RESET/TC SET
MIC POWER +48V
Connect an external microphone or audio
equipment to the INPUT 1/2 (XLR 3-pin)
terminals. (Page 41)
1
INPUT 2 switch
INPUT 1 switch
Use the INPUT 1/2 switches to switch the
audio input.
LINE: (audio equipment is connected)
Input level is 0 dBu.
MIC: (an external microphone is connected)
Input level is -50 dBu.
You can change the input level to -60 dBu
in the setup menus, RECORDING SETUP
screen MIC GAIN1 and MIC GAIN2. (Page 56)
Be aware that sensitivity will be higher if
you choose -60 dBu so you will record more
noise.
2
3
INPUT 1 terminal
INPUT 2 terminal
When using the phantom microphone
(which requires + 48V power supply),
set the INPUT 1/2 (MIC POWER +48V)
switches to ON.
ON: (When using the phantom microphone)
+48V power supply to INPUT 1/2 terminals.
OFF: (When a phantom microphone is not
connected)
No power supply for INPUT 1/2 terminals.
• The battery will discharge faster if you use a
phantom microphone.
• Set to OFF if you connect equipment not
compatible with +48V. You can damage such
equipment if you leave the setting at ON.
• When using the AG-MC200G (optional), set
the MIC GAIN item to -50 dBu.
17
Switching Audio Input (continued)
Adjusting the recording level
Use the CH1 SELECT switch to select the
input signal to be recorded to audio channel 1.
INT (L):
4
Audio from the built-in microphone Lch is
recorded to audio channel 1.
INPUT 1:
Audio from a device connected to INPUT 1
terminal is recorded to channel 1.
INPUT 2:
Audio from a device connected to INPUT 2
terminal is recorded to channel 1.
Use the CH2 SELECT switch to select the
input signal to be recorded to audio channel 2.
INT (R):
5
Audio from the built-in microphone Rch is
recorded to audio channel 2.
INPUT 2:
Audio from a device connected to INPUT 2
terminal is recorded to channel 2.
AUDIO control knobs
Use the AUDIO control knobs to adjust the
recording level of the built-in microphone or of
audio signals input through the INPUT 1/2 (XLR
3-pin) terminals.
To adjust the volume of the sound for monitoring.
(Page 12)
• When inputting the microphone signal to
channels 1 and 2, connect the microphone to
INPUT 2 and switch both CH1 SELECT and
CH2 SELECT to INPUT 2.
To adjust the recording level of the audio signals,
turn the AUDIO control knobs while referring to
the audio level meter at the bottom left of the
viewfinder and LCD monitor, regardless of the MIC
ALC option setting (Page 56) on the RECORDING
SETUP screen of the setting menu.
• Check the recording volume level prior to
shooting.
• The recording level of this camera is set
approximately 8 dB higher than Panasonic
broadcasting camera recorders (AJ series
products).
18
Using scene files
The settings according to the variety of shooting
circumstances are stored SCENE FILE MENU.
They are selected via the SCENE SELECT on the
settings menu SCENE FILE screen.
Changing scene file settings
The setting value of the scene file can be changed.
Also you can save the changed scene file to each
position of the SCENE FILE dial.
When the camera-recorder is shipped from the
factory, the following files are stored.
Example: Change the name of the scene file.
Set the POWER switch to ON.
1
2
F1:
File suitable for normal shooting.
F2: FLUO.
File suitable for shooting under fluorescent
lights, ie. indoors.
Select the scene file to be changed in the
SCENE FILE MENU.
In the setup menus, select the SCENE FILE
screen.
3
F3: SPARK
File suitable for shooting with fuller variations
of resolution, coloring and contrast.
F4: B-STR
File for broadening the contrast of dark parts,
such as when shooting sunsets.
F5: CINE V
• For menu operation (Page 44 of Vol.1)
• Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control) ”. (Page 23 of Vol.1)
File suitable for shooting movie-like scenes
where the contrast is to be emphasized. (The
recording format remains unchanged even
when the scene file is changed. It must be set
using the REC FORMAT item on the SCENE
FILE screen. (Page 51))
Tilt the Operation lever in the
and select the NAME EDIT item.
directions
4
5
Push the Operation lever (or tilt in the
direction), tilt in the direction to select
YES, and push the Operation lever again.
F6: CINE D
File suitable for shooting movie-like
scenes where the dynamic range is to be
emphasized. (The recording format remains
unchanged even when the scene file is
changed. It must be set using the REC
FORMAT item on the SCENE FILE screen.
(Page 51))
19
Using scene files (continued)
Set a 6-character filename with the
Operation lever when the following screen
is displayed.
6
Set the same as user information. (Page 27)
• Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ ] ^_-./
If the RESET/TC SET button is pressed
when the filename has been set, the
characters are cleared.
After you finish setting the filename, push
the Operation lever.
7
Select YES on the confirmation screen.
• Selecting YES will close the NAME EDIT
screen and confirm all changes.
8
• Once confirmed, all changed names and
values will be saved even if the power is
switched off or the scene dial is moved.
20
Saving scene files and other settings on SD Memory Cards
You can save up to four scene file settings or other
Push the Operation lever again, select YES
4
settings as files on an SD Memory Card, and you
when the following screen is displayed, and
can also load them from the card.
push the Operation lever.
• In the case of the scene files, the current settings
• In the following example, SCENE-01 is the
are automatically saved in the unit, and the
TITLE name. To change the TITLE name,
saved data is written on an SD Memory Card.
see the description below.
When data has been read from an SD Memory
Card, the current settings are rewritten at the
same time as the data saved inside the unit.
• The data in all the scene files, F1 to F6, is
rewritten.
If you have saved a scene file
Set the unit’s POWER switch to ON.
1
Select the slot number for the SD memory
card onto which you wish to save from
the CARD WRITE option on the settings
2
Press the MENU button to exit the menu
mode.
5
menu SCENE FILE screen, and press the
To read files
OPERATION lever.
1) Select READ in step 2 and push the Operation
For all other settings, select USER FILE.
lever.
• For menu operations (Page 44 of Vol.1)
2) Select the file number and push the Operation
• Operations may also be performed using buttons
lever.
on the remote control that correspond to those
3) Select YES on the confirmation screen.
on the camera. For details, see “Description of
READ COMPLETED will be displayed when
parts (Remote control)”. (Page 23 of Vol.1)
reading is complete.
To add titles to files
1) Go through steps 1 - 3.
2) Tilt the Operation lever in the
directions to
select characters, and tilt in the direction to
move to the next character.
The following characters may be inputted.
(Space), A-Z, 0-9, : ; < = > ? @ [ ] ^ _ - . /
3) Push the Operation lever when all characters
have been inputted.
Tilt the Operation lever in the
directions, select the file number (1 - 4), and
push the Operation lever.
3
4) Select YES on the confirmation screen.
• If WRITE PROTECT appears, release the
protected status of the SD Memory Card.
• If WRITE NG CANNOT ACCESS appears, quit
all other operations (such as playback) before
proceeding.
21
Clip metadata
You can add the video and audio systems, name
of the videographer, shooting location, text memos
and other information to the video data you have
recorded on the SD Memory Card. This data is
called the clip metadata.
LOCATION:
This indicates ALTITUDE, LONGITUDE,
LATITUDE, and SOURCE (altitude, longitude,
latitude, information source). Not recorded in
this camera-recorder.
∗2
SCENARIO:
(Display method: Page 38)
This indicates the PROGRAM NAME, SCENE
NO. and TAKE NO.
NEWS 1:
This indicates the REPORTER (name of the
reporter) and PURPOSE (purpose of data
collection).
There are two kinds of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload file created on the SD
Memory Card which is loaded in the unit.
(Loading method: Next page)
NEWS 2:
This indicates the OBJECT (target of data
collection).
∗3
MEMO:
What the clip metadata consists of
This indicates the PERSON (name of the
person who recorded the text memo) and TEXT
(contents of memo).
You can set the items underlined below by loading
the metadata upload file on the SD Memory
Card. All other items are set automatically during
shooting.
∗1
If there is no information in the metadata upload
file, consecutive five-digit numbers will be
applied to the clips in the order that they were
recorded, with the first clip to be recorded being
given the number 0. The USER CLIP NAME
recording method is selectable. Please refer to
the page 23.
GLOBAL CLIP ID:
This indicates the global clip ID that shows the
shooting status of the clip.
USER CLIP NAME :
This indicates the name of the clip that the user
∗1
has set.
∗2
∗3
When SCENARIO is to be input, you must input
the PROGRAM NAME. You cannot input the
SCENE NO. and TAKE NO. only.
VIDEO & AUDIO:
This indicates the recorded image’s FRAME
RATE, RESOLUTION, PULL DOWN system and
AUDIO.
When MEMO is to be input, you must input
TEXT. You cannot input PERSON only.
LENS:
This indicates the MAKER, MODEL, and
SERIAL No. of your lens.
ACCESS:
• Only printable ASCII characters can be
displayed by this unit.
This indicates the CREATOR (name of the
person recording), CREATION DATE (recording
date), LAST UPDATE DATE (date on which
the data was last updated) and LAST UPDATE
PERSON (the person who last updated the
data).
• Due to the limitations imposed by this unit
on the number of characters which can be
displayed, not all the data can be displayed.
(This does not mean that the data which is not
displayed has been deleted.) Use an AVCCAM
viewer or other program to check all the data.
• Metadata can be produced with AVCCAM
Viewer. (Page 73)
DEVICE:
This indicates the MANUFACTURER
(manufacturer of the equipment), SERIAL NO.
(serial number of the equipment) and MODEL
NAME (Equipment model name: AG-AF100 for
this camera-recorder).
SHOOT:
This indicates the SHOOTER (name of the
videographer) and the PLACE NAME (name of
location).
22
ā Up to 10 items of metadata on the SD
Memory Card can be displayed, starting
from the most recent date of production.
ā If characters other than single-byte
alphanumeric characters are used in the
metadata file name to be loaded, they are
Uploading the metadata (META DATA)
You can perform any of the following operations.
If necessary, make preparations prior to
undertaking the operations.
displayed as “ ”.
∗
Loading the metadata
RECORD:
• Insert the SD Memory Card on which the
metadata is recorded into the unit. (For details
on contents of the metadata, see the previous
page.)
Selecting whether to record the metadata on
the SD Memory Card
Select this to set whether to record the
metadata to be loaded into the unit
simultaneously on the SD Memory Card. Select
ON to record the metadata or OFF to cancel
the recording, and push the Operation lever.
The factory setting for this mode is OFF.
USER CLIP NAME:
Initializing the metadata inside the unit
Displaying the metadata inside the unit
The USER CLIP NAME recording method is
selectable. Please refer to the next column
below.
Press the mode button and select CAM
mode.
1
META DATA PROP:
Select this to display the metadata which has
been recorded in the unit.
Press the MENU button.
Menu operation (Page 44 of Vol.1)
2
CLIP COUNT RESET:
Reset the counter value to 1.
Select whether or not to reset (YES/NO), and
push the Operation lever.
Tilt the lever in the
META DATA, and push the Operation lever
(or tilt in the direction).
directions to select
3
META INIT SET:
Select this to initialize the metadata which
has been recorded in the unit.
Select YES to initialize the metadata or NO
to cancel the initialization, and push the
Operation lever.
Press the MENU button to release the menu
mode.
5
Tilt the Operation lever in the
to select item, and push the Operation lever.
directions
4
Selecting the USER CLIP NAME
recording method
Press the MENU button and select META DATA →
USER CLIP NAME to select the recording method.
Two options are available: TYPE1 and TYPE2.
USER CLIP NAME to be recorded
TYPE1
TYPE2
Uploaded data
+ COUNT
If clip metadata has Uploaded
been read in
data
∗
value
CARD READ:
If no clip metadata
has been read in
or if the setting
for recording clip
metadata has been recording
turned off
Read metadata set to the SD Memory Card
with the camera.
Move to LOAD, push the Operation lever,
select whether or not to read the metadata
(YES/NO), and push the Operation lever
again.
Sequential 5- Sequential 5-
digit number,
in order of
digit number,
in order of
recording
23
Clip metadata (continued)
∗
The COUNT value is indicated as a four-digit
number. The COUNT value is incremented each
time a new clip is captured if clip metadata has
been read in and TYPE2 has been selected as
the recording method.
The COUNT value can be reset using the
following procedure.
Press the MENU button, select META DATA→
CLIP COUNT RESET→YES, and push the
Operation lever to reset the counter value to 1.
Using the Counter
Counter display
Connect the TC PRESET IN/OUT terminals
(VIDEO OUT terminals) on the two devices
with a pin cable, and turn on the power.
1
You can display a counter that indicates how much
time has elapsed during shooting or playback.
■MASTER settings
Press the COUNTER button.
1
Each time you press the button, the display
changes as follows. (Page 45)
0 : 00. 00 (CAM mode only)
Counter value
Displayed when TOTAL is selected from
the REC COUNTER item in the DISPLAY
SETUP screen of MENU settings.
CLIP 0 : 00 . 00
Displayed when CLIP is selected in the
REC COUNTER item on the settings menu
DISPLAY SETUP screen.
Values are automatically reset when
recording is started, and counter values are
displayed for each individual clip.
TC 12 : 34 : 56 . 01
Check that the MASTER camera is set to the
2
CAM mode, and set the EXT TC LINK item
on the setting menu TC/UB SETUP screen to
MASTER.
OUTPUTTING LTC SIGNAL is displayed on
the screen, and the time code is output from
the TC PRESET IN/OUT terminal (VIDEO OUT
terminal).
• Select the same REC FORMAT setting for
both the MASTER and SLAVE cameras,
and set the TCG item on the TC/UB SETUP
screen to FREE RUN.
• To cancel the time code output, press the
MENU button.
Time code value (Display time code frame
digits in 24 frames when 24P is set, and in
30 frames when any other format is set.)
UB 12 34 56 78
■SLAVE settings
Set the EXT TC LINK item on the setting
3
menu TC/UB SETUP screen to SLAVE.
User information
No display:
Data is not displayed.
Press the COUNTER - RESET/TC SET
4
button. TCG values will be reset to the TC
values inputted from the MASTER.
• TC LINK OK will be displayed for
approximately 2 seconds when the menu
screen is closed.
• If the TC values cannot be set correctly, LINK
NG will be displayed.
• If the SLAVE device is set to 24P, please set
the TC MODE item on the MASTER device
to NDF.
TC preset mode
When shooting using a multi-camera, you can
synchronously set the initial values of time code.
The camera used for synchronization is the
MASTER and the camera being synchronized is
the SLAVE.
• To cancel the SLAVE mode, press the MENU
button.
24
Charging the built-in battery/Setting the time code
Recharging the built-in battery
Specifying the time code
(TC PRESET)
The camera’s internal battery saves the date and
time.
Set TC PRESET so you can record a value of your
choice as the initial setting for the time code to be
used at the start of recording.
When LOW INTERNAL BATTERY (indicating that
the internal battery has no remaining charge) is
displayed even when the date and time are set,
it means that the charge of the internal battery is
depleted. Do the following to recharge it.
Reset the date and time when fully recharged.
Set the POWER switch to ON.
1
Select the TC PRESET item in the settings
menu TC/UB SETUP screen.
2
• For menu operation (Page 44 of Vol.1)
• Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control)”. (Page 23 of Vol.1)
Connect the AC adaptor. (Page 25 of Vol.1)
• Leave the POWER switch at OFF.
1
Leave the camera-recorder like this for
about 4 hours.
• The internal battery charges during this time.
• Check the time code and menu operations
after recharging.
2
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.
3
If the date and time are not memorized after
recharging, the internal battery requires changing.
Please consult the place of purchase.
Setting the time code
In the setup menus, TC/UB SETUP screen, set the
following time code related items. (Page 57)
• TC MODE
• TCG
• TC PRESET
25
Charging the built-in battery/Setting the time code (continued)
With this unit, the time code value is adjusted in
When the screen below appears, set the
time code value.
4
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording.
Tilt the Operation lever in the
and select time code value.
directions
Adjustments are made in 4-frame increments when
the recording format is 24P.
Time code
Recording format
adjustment
1080/24P
720/24P
Adjustable in
4-frame increments
Tilt in the direction to move to the next digit,
and tilt in the
value.
directions again to select
You can reset the time code to zero by pressing
RESET/TC SET button.
BARS
ZEBRA
OIS
EVF DTL
WFM
CH1 SEL
CH2 SEL
(
)
INT
L
INPUT1
INPUT2
INPUT1
INPUT2
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
COUNTER-RESET/TC SET
MIC POWER +48V
Camera
Push the Operation lever when you have
finished setting the time code.
5
6
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.
26
Setting user information
You can reset the user information to nothing by
pressing RESET/TC SET button.
Setting user information allows you to store 8-digit
information in the hexadecimal format.
BARS
ZEBRA
OIS
User information is automatically saved in the
memory and retained after you turn off the power.
EVF DTL
WFM
CH1 SEL
CH2 SEL
(
)
INT
L
INPUT1
INPUT2
INPUT1
INPUT2
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
Set the POWER switch to ON.
COUNTER-RESET/TC SET
1
MIC POWER +48V
In the setup menus, TC/UB SETUP screen,
select UB PRESET.
2
Camera
• For menu operation (Page 44 of Vol.1)
• Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control)”. (Page 23 of Vol.1)
Push the Operation lever when you have
finished setting the user information.
5
6
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.
Tilt the Operation lever in the direction to
3
move to YES, and push the Operation lever.
Set the user information.
Tilt the Operation lever in the
4
directions
and select user information characters.
• You can use numbers from 0 to 9 and letters
from A to F.
Tilt in the direction to move to the next digit,
and tilt in the
character.
directions again to select
27
Basic playback operations
MODE button
Turn the POWER switch to ON.
1
2
PO.W.ER
ON
Press the mode button so the PB lamp turns
on.
OFF
CAM MODE
PB
The camera is now in the PB mode.
• Each time you press the button, the mode
changes as below.
POWER switch
PB
CAM
For details on playing back clips using thumbnails, see page 29.
Operations using the Operation lever
Remote control
Play (
)
SEARCH
STILL ADV
SKIP
PLAY
PAUSE
STOP
SEARCH
SLL DV
Press to play the clip currently indicated by the cursor.
Fast forward (
)
SEARCH
PLAY
SEARCH
Press during playback to scroll quickly through the clip at
approximately 10 times the speed.
STILL ADV
SKIP
PAUSE
STOP
STILL ADV
SKIP
Repeat the operation to scroll quickly at approximately 20 times the
speed.
Press while paused to move to the next clip.
Rewind (
)
SEARCH
STILL ADV
SKIP
PLAY
PAUSE
SEARCH
STILL ADV
KIP
Press during playback to scroll quickly backwards through the clip at
approximately 10 times the speed.
Repeat the operation to scroll quickly backwards at approximately 20
times the speed.
Press while paused to move to the previous clip.
Stop (
)
SEARCH
PLAY
SEARCH
STILL ADV
SKIP
STILL ADV
SKIP
PAUSE
STOP
Pause (
)
SEARCH
STILL ADV
SKIP
PLAY
PAUSE
STOP
SEARCH
STILL ADV
SKIP
Press during playback to pause the clip.
Press again to return to normal playback.
28
Thumbnail screen
Video data created in one shooting session is called a clip. When the PB mode has been established,
the clips will be displayed on the LCD monitor and the viewfinder as thumbnails. (When there is a large
number of clips, it will take some time for them to be displayed on the screen.)
You can perform the following operations using the thumbnail screen.
• Play and delete clips
• Format SD Memory Card
• Add or delete index
• Add or delete shot mark
Basic thumbnail screen operations
To select thumbnail:
MENU
EXEC
Tilt the Operation lever in the
(Orange frame moves).
directions to select thumbnail
PUSH-ENTER
To play back clips:
–
+
Select the thumbnail, and push the Operation lever.
(For details on playback, see page 28.)
To change the slot for playback:
AUDIO MON
Press the SLOT SELECT button to select the slot.
To play back still images:
Press the SLOT SELECT button to select the slot.
1
2
3
4
11
10
12
5
6
7
8
9
29
Thumbnail screen (continued)
1
Thumbnail display status (Page 34)
The types of clips displayed as thumbnails
appear in this area.
2
3
4
5
6
Repeat playback indicator (Page 32)
Displayed during repeat playback.
Card status display
Displays status of SD Memory Card.
Battery remaining display (Page 24 of Vol.1)
Displays remaining battery capacity.
Cursor (Orange frame)
Displayed on currently selected thumbnail.
Recording mode display
Displays recording mode if clip currently
highlighted by cursor has been recorded in PH
mode.
7
Recording format display
Displays recording format of currently selected
clip.
8
9
Duration display
Displays duration of currently selected clip.
Time display (Page 34)
Displays time code at start of clip recording/
user information at start of clip recording/time
of recording/date of recording/date and time of
recording – according to settings.
10 Clip number
Displayed in order of recording (up to 1000
clips). Numbers of clips that cannot be played
back (e.g. clips of different recording formats)
are displayed in red. To play clips displayed
in red, set the PB format in the settings menu
PLAY SETUP screen to the appropriate
recording format (Page 64).
11
: Clip protect display
Displayed on protected clips.
12 Indicators
: Shot mark
M
This indicates that a clip has a shot mark.
(Next page)
I : Index
Displayed when indexes have been attached
(Page 35).
: Resume playback display
Displayed on clips on which resume playback
setting has been applied.
30
Adding shot marks to clips
Select the card slot for playback
Adding shot marks ( M ) will make it easier to find
the clips you are looking for.
You can switch the SD memory card slot for
playback.
Tilt the Operation lever in the
directions to move the yellow frame to the
clip for which a shot mark is to be added.
Press the SLOT SELECT button when the
THUMBNAIL screen is displayed in the PB
mode.
1
1
Press the USER button to which the shot
2
mark function has been allocated. (Page 55)
To release a shot mark, repeat the above steps.
• It is not possible to add shot marks to clips
recorded using a consumer camcorder model.
Tilt the OPERATION lever in the up, down,
2
left, and right directions to select the SD
memory card slot for playback. You can play
back still images as well.
VIDEO:
Movie playback
PICTURE:
Still picture playback
Push the OPERATION lever.
3
31
Playback settings (PLAY SETUP)
Make settings for playback format and method.
Repeat playback (REPEAT PLAY)
Use this setting to repeatedly play back all
available clips.
Set playback format (PB FORMAT)
Set format for playback.
Press the MENU button.
Menu operation (Page 44 of Vol.1)
1
Press the MENU button.
Menu operation (Page 44 of Vol.1)
1
Set the REPEAT PLAY item in the PLAY
SETUP screen to ON.
2
Select the PB FORMAT item in the PLAY
SETUP screen, and push the Operation
lever (or tilt in the direction).
2
Press the MENU button to return to the
thumbnail screen.
3
The repeat playback indicator will be displayed.
When the playback operation is performed, the
playable clips are played back repeatedly.
• Repeat playback will continue until playback
is paused.
• To turn the repeat playback setting off, select
OFF in step 2.
Tilt the Operation lever in the
to select the format for playback, and push
the Operation lever.
directions
3
• The setting for the REC FORMAT item on
the setting menu SCENE FILE screen is
reflected as the initial setting.
• Clip numbers will be displayed in black
where playback is possible, and in red where
playback is not possible.
• Even if the playback format is changed, the
format set in the REC FORMAT item on the
settings menu SCENE FILE screen will be
restored when the camera is switched to CAM
mode.
• If the playback format does not conform to the
clips created at the relay destination using the
relay recording function, thumbnail images
will not be displayed (! will be displayed).
Thumbnail images will be displayed when the
playback format is matched to the clips.
32
Resume playback (RESUME PLAY)
Set skip method (SKIP MODE)
Use this setting to play back from where clip had
previously been paused.
Select which skip (cue) operation is to be
performed when playback is paused.
Press the MENU button.
Menu operation (Page 44 of Vol.1)
Press the MENU button.
Menu operation (Page 44 of Vol.1)
1
1
Set the RESUME PLAY item in the PLAY
SETUP screen to ON.
Select the SKIP MODE item in the PLAY
SETUP screen.
2
2
Press the MENU button to return to the
thumbnail screen.
Select skip method.
CLIP:
3
3
Move to the beginning of the previous or next
clip by tilting the Operation lever in the or
direction while playback is paused.
CLIP & INDEX:
Move to the beginning of the previous or
next clip, or to the previous or next INDEX
position, by tilting the Operation lever in the
or direction while playback is paused.
Select a clip for playback.
4
If playback has previously been paused, the
resume playback indicator will be displayed on
the clip thumbnail, and the remainder of the clip
will be played next time the clip is selected for
playback.
• To turn the resume playback setting off,
select OFF in step 2.
Press the MENU button to return to the
thumbnail screen.
4
33
Thumbnail operations
Selecting the thumbnail display method (THUMBNAIL)
You can display the kind of clips you want to see
as thumbnails.
You can also set more precisely how you want the
thumbnails to appear on the screen.
INDICATOR:
Set whether or not to display indicator (ON/
OFF). (Factory default setting is ON.)
Clip protect display and resume playback
display will still appear even if this setting is
set to OFF.
Press the MENU button.
Menu operation (Page 44 of Vol.1)
1
DATA DISPLAY:
Select format of clip time display – time code
(TC)/user information (UB)/recording time
(TIME)/recording date (DATE)/ recording
date and time (DATE & TIME). If recording
time (TIME) is selected, the display will be in
the format “Month-Day Time”.
Select the THUMBNAIL screen, and push the
Operation lever (or tilt in the direction).
2
Tilt the Operation lever in the
directions
3
to select item, and push the Operation lever.
DATE FORMAT:
Select display order for recording date - year-
month-date (Y-M-D)/month-date-year (M-D-
Y)/date-month-year (D-M-Y).
This setting will not be reflected in CLIP
PROPERTY.
Press the MENU button to return to the
thumbnail screen.
4
THUMBNAIL MODE:
Select the clips to be displayed.
ALL:
Display all clips.
SAME FORMAT:
Display all clips of the same format as the
current PB format.
MARKER:
Display all clips with shot marks.
INDEX:
Display all clips with indexes.
34
Deleting and protecting clips (OPERATION)
Clips may be deleted or protected.
• Protected clips cannot be deleted.
• If selecting ALL CLIPS to delete all clips from
the memory, this operation may take some
time to complete, depending on the volume of
clips to be deleted.
Press the MENU button.
Menu operation (Page 44 of Vol.1)
1
Select the OPERATION screen, and push the
Operation lever (or tilt in the direction).
2
• Deletion cannot be performed via the remote
control.
• To abort deletion, press the CANCEL button.
The already deleted clips cannot be restored
even if the deletion process is aborted.
INDEX:
YES:
Attach indexes to selected clips.
1) Select clip to play, and push the
Operation lever at the point for an index
to be added.
Tilt the Operation lever in the
to select item, and push the Operation lever.
directions
3
2) Select YES on the confirmation screen
to attach index.
DELETE:
ALL CLIPS:
• The point in the clip at which the index
will actually be attached will be accurate
to within an error of 0.5 seconds.
• To delete index, select INDEX→YES in
step 3 before performing the following.
1) Select clip to play, tilt the Operation lever
in the direction, and pause the clip.
2) Tilt the Operation lever in the
directions to move the pointer
between the points where indexes
are attached. Move the pointer to the
index to be deleted, and push the
Operation lever.
Delete all clips.
Select whether or not to delete (YES/NO),
and push the Operation lever.
SELECT:
Delete selected clips.
Select clips with the Operation lever. If
clips are selected with the OPERATION
lever, the selected clips appear within a
red frame. (Repeat this operation to select
multiple clips.)
Press the EXEC button to confirm, tilt the
Operation lever in the
select whether or not to delete (YES/NO),
and push the Operation lever.
NO:
Return to the previous screen.
directions to
3) Select YES on the confirmation
screen.
NO:
Return to the previous screen.
• It is not possible to add indexes to clips
recorded using a consumer camcorder model.
• It is not possible to adjust the volume during
index playback.
35
Thumbnail operations (continued)
CLIP PROTECT:
YES:
Press the MENU button to return to the
thumbnail screen.
4
Protect selected clips.
(
mark will be displayed.)
• Cancel protection when the protected
clip is selected.
(
mark will disappear.)
Executing a format of the memory card
(see below) will delete all clips even if they
are protected.
NO:
Return to the previous screen.
Copying clips (COPY)
Clips recorded onto SD cards can be copied onto
other SD cards.
Copying PICTURE
ALL SCENES:
All scenes
Insert the SD card containing the clip you
wish to copy into one of the SD card slots.
SELECT CLIPS:
Select scenes.
1
Insert the card you wish to copy the clip
onto into the other SD card slot.
• Clips cannot be copied if there is not enough
space available on the target card.
Select start copy.
2
6
Do not open the SD card slot covers or switch
the camera off during copy operations.
• The copy function will not operate if the
remaining battery capacity is insufficient.
Exchange the battery for a charged one, or
use the AC adaptor.
Select COPY from OPERATION of the PB
MENU.
3
Select the type of data to be copied.
4
VIDEO&PICTURE:
Video images and photograph data
VIDEO:
Clips recorded with AG-3DA1 cannot be
selected for copying in this camera. Clips that
cannot be played back in this camera cannot be
selected as well. However, pictures that cannot
be played back in this camera can be selected
and copied.
Video images only
PICTURE:
Photograph data only
Select copy method.
Copying VIDEO
ALL CLIPS:
5
All scenes
SELECT CLIPS:
Select scenes.
SAME FORMAT:
Scenes of the same format as the current PB
format
INDEX:
Scenes with INDEX input
MARK:
Scenes with scene MARK input
36
Format card and check clip and card information (CARD FUNCTIONS)
SD Memory Cards can be formatted, and clip and
SD Memory Card information can be checked.
Tilt the Operation lever in the
to select item, and push the Operation lever.
directions
3
Press the MENU button.
Menu operation (Page 44 of Vol.1)
1
2
Select CARD FUNCTIONS, and push the
Operation lever (or tilt in the direction).
CARD FORMAT:
• Insert card to be formatted into the camera.
• SD Memory Card will be formatted.
Proceeding will delete the entire data,
including videos and picture data, from the
card.
Select whether or not to format (YES/NO),
and push the Operation lever.
CARD STATUS:
Display SD Memory Card information.
(Next page)
CLIP PROPERTY:
Display information of selected clip.
(Next page)
• Tilt the Operation lever in the
directions
to display information from previous or
subsequent clips.
Press the MENU button to return to the
thumbnail screen.
4
37
Thumbnail operations (continued)
SD Memory Card information screen
Clip information screen
1
2
1
2
3
1 USED SPACE :
Used space
2 FREE SPACE :
Available space
1 Clip number
2 Thumbnail (Thumbnail screen: Page 29)
3 Clip information
Displays data attached to the clip.
START TC:
Time code value at start of
recording
START UB:
User information value at
start of recording
DATE/TIME: Date of recording at time at
start of recording
TIME ZONE: Displays time zone.
DURATION: Clip length
FORMAT:
Recording format
• Clip meta data
Press the EXEC button while the clip
information screen is being displayed to
display more detailed information, including
video and audio formats, and information
about the videographer, etc.
Tilt the Operation lever in the
directions
to verify the desired information. (Please
see page 22 for more information on clip
metadata.)
38
Useful playback functions
Fast forward/rewind
Next/previous clip
Tilt the Operation lever in the
(rewind) or
Tilt the Operation lever in the direction
during playback to pause the clip (or press
the PAUSE button on the remote control).
1
1
(fast forward) direction during playback
(or press the SEARCH buttons on the
remote control).
Tilt the Operation lever in the
(rewind) or
Clip will play forwards/backwards at
approximately 10 times the normal speed.
Repeat the operation to play the clip forwards/
backwards at approximately 20 times the
normal speed.
2
(fast forward) direction during playback
(or press the SKIP buttons on the remote
control).
SEARCH
STILL ADV
SKIP
PLAY
PAUSE
STOP
SEARCH
STILL ADV
SKIP
SEARCH
STILL AD
SKIP
PLAY
PAUSE
P
SEARCH
STILL A
SKIP
Camera
or
Remote control
Camera
or
Remote control
To return to normal playback, tilt the Operation
lever in the direction (play) (or press the PLAY
button on the remote control).
• The screen will return to the thumbnail display
after the playback of the last clip is completed
during fast forward playback.
• The screen will pause at the first clip after the
fast rewind playback of the first clip is completed.
• No audio will be played during fast forward or
rewind playback.
39
Useful playback functions (continued)
Frame-by-frame playback
Viewing images on a television
Tilt the Operation lever in the direction
during playback to pause the clip (or press
the PAUSE button on the remote control).
You can view the images on a television if you
connect the unit to a television set using an AV
cable (not included) or HDMI cable (not included).
1
Press the AUDIO MON/ADV buttons (or
press the STILL ADV buttons on the remote
control).
Connect the camera-recorder to the TV set.
(Page 42)
2
1
• Hold down to continuously advance frame by
frame until the button is released.
• Hold down the STILL ADV button on the
remote control to continuously advance
frame by frame. Press the PAUSE button to
cancel.
Start playback.
2
• To show the information that appears on the
viewfinder and LCD on a television, press
the EXT. DISPLAY button on the remote
control.
Press the EXT. DISPLAY button again to
clear the display.
SEARCH
STILL ADV
SKIP
PLAY
PAUSE
STOP
SEARCH
STILL ADV
SKI
START/
PUSH-ENTER
PHOTO
SHOT
EXT
STOP
DISPLAY
–
+
DATE
TIME
ZOOM
DIO MON
VOL
Camera
or
Remote control
When the + button is pressed, the images are
advanced in the forward direction, and when the
- button is pressed, they are advanced in the
reverse direction at half-second intervals.
To return to normal playback, tilt the Operation
lever in the direction (play) (or press the PLAY
button on the remote control).
Checking the date and time
Press the DATE/TIME button on the remote
control to show the date and time of shooting on
the viewfinder and the LCD monitor. The display
changes as follows each time you press the button.
Time
START/
PHOTO
SHOT
EXT
STOP
Adjust volume
DISPLAY
Date
DATE/
TIME
ZOOM
The volume of audio output from the
1
Time and Date
No display
internal speaker and headphone jack can be
adjusted with the AUDIO MON/ADV buttons
during playback.
VOL
Press the ZOOM/VOL buttons if using the
remote control.
DATE/
ZOOM
TIME
PUSH-ENTER
VOL
–
+
DIO MON
Camera
or
Remote control
40
Connecting external units
Headphones
3.5-mm stereo mini jack
• Sound is no longer heard from the speaker when the headphones (optional) are connected.
External microphone
Microphone (optional)
Microphone holder
AG-MC200G
Microphone
holder adaptor
12 mm
NPUT1 or
INPUT2
6 mm
• When attaching an external microphone to the microphone shoe, use the supplied microphone holder
and microphone holder adaptor.
• When attaching the microphone holder and the microphone holder adaptor, be sure to tighten the screws
firmly even though you might hear a squeaking sound.
• The microphone holder mounting position is provided at two locations, namely in the handle and on
top of the INPUT 1 and INPUT 2 terminals. If the microphone holder is mounted on the handle, the
microphone may be captured if a wide-angle lens is used. Select the mounting location after checking
the images.
• When wiring the microphone cable, use either the cable clamper of the microphone holder adaptor, or
the included cable clamper.
4 mm
Cable clamper
41
Connecting external units (continued)
Computer (non-linear editing/file transfer)
USB connection cable
(optional)
Computer
Mini-B
USB 2.0
• For details on the computer’s conditions and other factors, see page 44.
• Use a double-shielded USB connection cable with a maximum length of three meters.
TV/Monitor
Only the output signals from the camera are shown.
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
TV/Monitor
HDMI cable
(optional)
Connect these
cables to the
terminals on
the television.
Video cable
(optional)
BNC cable (optional)
42
■When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
• Use a double-shielded HDMI cable (not included).
• It is recommended that you use Panasonic’s HDMI cable.
• This product is not compatible with VIERA Link.
■Limitations of image output
• When using SDIOUT output, side LCD and EVF cannot be operated simultaneously. In order to perform
simultaneous operation, set the SDI OUT on the settings menu AV IN/OUT SETUP to OFF. When the
EVF MODE on the settings menu DISPLAY SETUP is set to AUTO, EVF disappears upon opening/
closing of the LCD.
• No HDMI output is performed when REC FORMAT is set to 1080/24p and SDI 24Ps is set to ON.
• When SDI&HDMI OUT SEL is set to DOWNCONV, SIDE CROP is disabled in the DOWNCON MODE
settings, and SQUEEZE is enabled automatically.
• Some displays, such as time code display and audio level meter display may not be visible on the videos
output from the VIDEO OUT terminal.
43
Nonlinear editing
Non-linear editing of video data on SD Memory
Cards can be performed by connecting the camera
via the USB connection cable to a computer for
editing. (As for connection, refer to page 42)
Use a sufficiently charged battery or the AC
adaptor.
• When copying files from the camera to a
computer, be careful to ensure that files are
not accidentally overwritten.
• For more details, please refer to your
computer editing software’s operating
instructions.
• When changing cards, always ensure that
the access lamp is not flashing and that the
card is not currently being accessed.
• Camera functions cannot be used when the
camera is connected to a computer.
• Always perform “safe hardware removal”
when disconnecting the cable.
• The data on the SD Memory Card cannot be
accessed when the SD Memory Card slot
cover is open.
The following conditions are necessary for USB
connection.
• PC with Windows XP, Windows Vista, or
Windows 7; or Macintosh with Intel CPU (Intel
Mac)
• USB 2.0 (High Speed, Mass Storage Class)
compatibility (not compatible with USB 1.1)
• Only connect to one computer at a time.
• Camera cannot be operated if a hub or other
device is connected between the camera and
computer.
Turn the camera’s power off.
5
• If the camera cannot be correctly recognized
by the computer, this may be able to be
remedied by one of the following methods.
ā Turn the power of the camera and the
computer off and back on again.
ā Remove the SD Memory Card from the
camera and reinsert it.
ā Connect to a different USB terminal on the
computer.
• If you are using an SDXC memory card,
some personal computers may not recognize
the data. Make sure your personal computer
supports SDXC cards.
Insert the SD Memory Card, and move the
POWER switch to ON.
1
Connect the camera to the computer with
2
the USB connection cable.
Turn the computer’s power on before
connecting.
Select ‘PC’
Dubbing can be performed to a Blu-ray Disc
Recorder, etc. by selecting ‘RECORDER’.
3
Perform non-linear editing on the computer.
4
The contents of the SD Memory Card will
appear as a removable disk icon within My
Computer or the desktop on the computer
screen. (Page 73)
(Example) Windows
Removable disk (E:)
(Example) Macintosh
NO NAME
44
Screen displays
Regular displays
3
19
5
1
24 23
26
22
2
20
21
27
4
7
18
17
16
8
15
14
30
9
6
28
25
29
11
31
10
12 13
1
Time code display
:
Card is write-protected
Each time you press the COUNTER button, the
display switches over to the following data (or
no indication).
COUNTER:
Counter value
Displayed when TOTAL is selected from
the REC COUNTER item in the DISPLAY
SETUP screen of MENU settings.
CLIP:
CLIP counter value for respective clip
Displayed when REC COUNTER item on
settings menu DISPLAY SETUP screen is
set to CLIP.
: Recording not possible
: Card is full
ā Recording may be possible in some cases
even when this icon is displayed.
ā Depending on the memory size and
type of the SD Memory Card used, the
icon may not be displayed even when
the card’s memory becomes full during
shooting, and the shooting is stopped.
: Playback-only
SD Memory Cards already containing 1,000
or more clips may be used for playback
only.
ā During playback, the time code display
is automatically set to CLIP, and the time
code is counted from a value of 0:00:00
for each clip.
: Accessing card
: No card inserted
ā Flashes red.
3
Media capacity display
TC:
Displays remaining capacity for recording
frame rate set in the REC FORMAT item on the
settings menu SCENE FILE screen.
Not displayed during PB mode.
• Time displayed is a guideline only.
• The remaining capacity of the slot 2 is also
displayed here.
Time code value.
When the time code value could not be read
correctly from the SD Memory Card, [TC∗] is
displayed.
UB:
User information
When user information could not be read
correctly from the SD Memory Card, [UB∗] is
displayed.
4
5
Recording format display (Page 51)
Information display
Following information is displayed depending
on the situation.
• Performance of the auto white balance or the
auto black balance
• Warning (Page 48)
2
Media information display
Displays basic information about inserted SD
memory cards. Information regarding slot 1 is
displayed above, and information regarding slot
2 is displayed below.
: Recording possible (White)
ā Displayed in green if used for recording.
• The ND filter recommended under the
prevailing shooting conditions is displayed.
45
Screen displays (continued)
• The AWB error message (LOW LIGHT /
LEVEL OVER) is displayed. (Page 42 of
Vol.1)
• The functions allocated to the USER buttons
are displayed while you hold down the DISP/
MODE CHK button.
15 Focus control information display
Displays the focus control information with 99 - 00.
In the auto focus mode, AF appears. In the manual
focus mode, MF appears.
The units can be switched between feet and
m in the ZOOM & FOCUS item of the setting
menu DISPLAY SETUP screen.
The focus position display does not move
linearly.
6
7
Microphone level automatic control display
Appears when in the setup menus,
RECORDING SETUP screen, MIC ALC, you
have selected “ON”.
16 ND filter display
ND filter selected is displayed.
Marker luminance display
When markers are displayed, the brightness
level around the center of the screen is
indicated as 0% to 99%. “99%↑” appears if the
percentage is over 99.
17 Gain display
Displays the gain value of the image amplifier
configured. (During the auto mode, AGC is
displayed.)
• When the AREA Y-GET function is operating,
the brightness level around the center of the
AREA frame is displayed.
18 AWB information display
Displays the information of white balance.
ATW:
When ATW is set
P3.2K/P5.6K/VAR: In the case of preset
8
Date and time display
Month
Ach/Bch:
LOCK:
In the case of A/B
When ATW is locked
Day of the month
19 Marker display
Year:
2001 - 2039
Hours
During shooting, pressing the ZEBRA button
once or twice will display the marker.
20 Optical Image Stabilizer
display
Minutes
Seconds
Displayed when Optical Image Stabilizer is ON.
21 Scene filename display (Page 19)
22 Remaining battery capacity display
When using Panasonic-manufactured batteries
compatible with this product, the remaining
battery capacity is displayed in minutes.
Time remaining will be displayed after a brief
pause.
mmm dd yyyy hh:mm:ss
9
Frame rate display
Displays recording frame rate.
Not displayed when set to 1080/60i.
10 Shutter speed display
• The battery display will change
The shutter speed is displayed here.
→
→
→
→
11 Audio level meter display (Page 18)
as battery capacity decreases.
will be
12 Auto iris control display
STD: Standard auto-iris control
SPOT: Auto iris control for spotlight
BACK: Auto iris control for backlight
compensation
displayed in red when less than 3 minutes
are remaining, and
battery is empty.
will flash when the
13 Iris display
Displays F value. The STEP of the display
value differs depending on the lens.
14 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
The unit can be switched to mm in the ZOOM
& FOCUS item of the setting menu DISPLAY
SETUP screen.
The focus position display does not move
linearly.
(Continued on the next page)
46
• Remaining battery capacity may not be
displayed correctly when using in high or
low temperatures, or when the battery has
not been used for a long period of time.
To ensure that remaining battery capacity
is displayed correctly, use the battery
completely from a fully-charged state, and
charge the battery again. (Remaining battery
capacity may still not be displayed correctly if
the battery has been used for long periods in
high or low temperatures, or if the battery has
been recharged a large number of times.)
• The remaining battery capacity display is
a guideline and may change according to
usage conditions.
26 Safety zone
The range of the zone is indicated by the
SAFETY ZONE item (Page 59) on the
DISPLAY SETUP screen.
90%:
Range that can be displayed on an
ordinary home-use TV set.
Range cropped to 4:3
4:3:
14:9:
Range in between 16:9 and 4:3
2.35:1: Cinema scope range
2:1 : 2:1: Scope range
1.85:1: American visa range
GRID:
27 Metadata recording information
When metadata recording is ON
Horizontal/vertical grid lines
:
META
No display: When metadata recording is OFF
• The remaining battery capacity display will
momentarily disappear when switching
between modes, when conducting REC
CHECK operations or when changing the LCD
brightness since the capacity is recalculated at
these times.
28 Recording audio type display
LPCM
:
:
When audio LPCM recording
When audio AC3 recording
AC3
29 FOCUS_BAR display
• Not displayed when using AC adaptor.
23 Operation status display
(Red) : Recording
Displays the above items in the bottom left of
the LCD/EVF. Digitizes and displays high-
frequency component volumes for videos.
White bar: focus bar display
(Green): Playback paused
:
Playback
(White): Playback paused
Green line: peak display
INDEX [
]:
Playback paused at INDEX
position
30 IRIS METER display
(
):Frame-by-frame playback
(Frame-by-frame reverse
playback)
Displays the above items in the bottom right of
the LCD/EVF.
Center: Indicates the normal light intensity.
(
(
): Skip (reverse skip)
): Fast forward/fast playback
(Rewind/fast reverse playback)
Paused in final scene (paused in
initial scene)
Right:
Left:
Indicates high-light intensity.
Indicates low-light intensity.
(
):
Green dots on display:
Indicate the compensation amount
during AUTO IRIS.
31 AREA frame display
Displays the range of the AREA function.
Self-portrait recording display
No display: Cannot record (no card, etc.)
:
Recording in progress, during transition to
the recording pause mode
: Recording paused (recording standby)
:
Warning display
24 Recording function display
:When pre-rec mode is ON
PRE-REC
:In interval REC mode
25 Monitor audio level meter
When you press the AUDIO MON/ADV button,
the sound volume output from the built-in
speaker and headphone jack is displayed.
47
Screen displays (continued)
Main warning displays
The main warning displays appearing on the LCD monitor or viewfinder are listed below. If a warning
display is not listed, check carefully the message displayed.
■C
CHECK CARD.
CANNOT BE USED DUE TO INCOMPATIBLE
Please check the card.
DATA.
If an SD memory card that has been used before
in another device or personal computer is used
for the first time in this camera-recorder, CHECK
CARD is displayed, and all operations may be
disabled. In such a case, perform the following:
No use is possible because the standard for the
data is different.
CANNOT DELETE.
Clip cannot be deleted.
1 Remove the SD memory card from the unit
and insert it again. (Page 38 of Vol.1)
The unit recognizes the SD memory card and
cancels the CHECK CARD display.
2 If the CHECK CARD display is not canceled
even after removing and inserting the SD
memory card several times, check the
contents of the card on a personal computer,
and erase the entire data.
CANNOT DELETE WITH THIS BUTTON
Clip cannot be deleted.
CANNOT PLAY.
No playback is possible.
CANNOT PLAY WITH THIS BUTTON
No playback is possible.
CANNOT RECORD PH MODE AND HA MODE
INTO THIS CARD.
This card cannot be recorded to in PH mode or
HA mode.
3 Format the SD memory card in the unit. (Page
36 of Vol.1)
If the data on the card cannot be either read or
erased on a personal computer, the SD memory
card may be corrupted. Use another SD
memory card.
CANNOT RECORD.
THE NUMBER OF CLIPS HAS EXCEEDED
THE MAXIMUM LIMIT.
The maximum number of clips has been reached
and no further clips can be recorded.
CHECK USB CABLE.
Please connect the camera-recorder to a PC.
CANNOT SET
THE NUMBER OF INDEXES HAS EXCEEDED
THE MAXIMUM LIMIT.
No further indexes can be set because the
number of indexes will exceed the maximum
limit.
CONTROL DATA ERROR HAS BEEN
DETECTED.
An error has been detected in the control
information.
■D
CANNOT SET PRE-REC,
CARD CAPACITY TOO LOW.
PRE-REC cannot be set as the remaining card
capacity is low.
DISCONNECT USB CABLE.
When switching from one mode to another,
disconnect the USB connection cable.
■I
CARD DOOR OPENED.
INCOMPATIBLE CARD.
PLEASE CHECK CARD.
The card door is open.
This card may have been formatted in a format
with different system frequency. Check the card.
CARD ERROR.
PLEASE REFORMAT.
Formatting has failed. The card needs to be
reformatted.
CARD FULL.
(Continued on the next page)
The card is full.
48
■N
■W
NO CARD
WRITE PROTECT
No card is inserted.
The card is write-protected.
NOW ACCESSING.
Error displays
PLEASE DO NOT REMOVE CARD.
Card is currently being accessed. Please do not
remove the card.
The following messages are displayed when
an error has occurred in the camera or the SD
Memory Card. If the problem is not solved by
switching the power off and back on again,
either change the card in accordance with the
instructions displayed, or consult the place of
purchase.
■R
REC STOPPED.
NOW WRITING.
Video recording has been stopped. Data is now
being written to the card.
■C
REPAIR CLIP?
CANNOT RECORD
Do you wish to repair clips now?
Displayed when an error has occurred during
recording.
■S
SD CARD FORMAT?
YES NO
■R
REC WARNING
Do you wish to format the SD Memory Card
now? Yes/No
Displayed when an error has occurred during
recording. Start the recording again. If the
message appears again, please consult the
place of purchase.
SET DATE AND TIME
Set the date and time.
• Please switch the power off if the message
continues to appear.
■T
• Please try inserting a different card if the
message appears again after restarting
recording.
THE CLIP IS PROTECTED.
PLEASE CANCEL PROTECTION.
The clip is protected. Please cancel the
protection.
■S
THE RECORDING IS STOPPED
(OVER THE LIMITATION)
Recording will stop. (Continuous recording for 12
hours)
SYSTEM ERROR
TURN POWER OFF
Displayed when an error has occurred in the
system. Switch the power off and back on again.
• If this error is displayed when accessing the
SD Memory Card, such as when deleting a
clip, the SD Memory Card may be damaged.
Please replace it with a new SD Memory Card.
• If this error is displayed when repairing the
SD Memory Card, please use the AVCCAM
Restorer content repair software (Page 38
of Vol.1).
THE TC MODE IS CHANGED TO "NDF"
NDF is selected as the TC MODE setting.
THIS BATTERY CANNOT BE USED.
This battery cannot be used.
THIS CARD CANNOT RECORD IN VIDEO
MODE.
The card cannot be used for video recording.
■W
WARNING
THUMBNAIL DATA ERROR IS DETECTED.
An error has been detected in the thumbnail
information.
Displayed when an error has occurred with the
camera itself. Start the recording again.
FOCUS NG (error with focus operation)
PSD NG (error with jitter detection)
■U
UNABLE TO FORMAT.
The card cannot be formatted.
49
Screen displays (continued)
Setting the DISPLAY items
Display the following items on the viewfinder and LCD monitor by pressing the DISP/MODE CHK
button or by configuring OTHER DISPLAY of the DISPLAY SETUP screen of the setup menus. (Page 60)
MODE CHK
OTHER DISPLAY settings
Displays
(Hold down DISP/ DISPLAY
MODE CHK button)
ALL
PARTIAL
OFF
1
2
3
4
5
6
Time code display
—
—
—
—
—
—
—
x
—
—
—
x
Media information display
Media capacity display
Recording format display
Information display
—
—
—
—
—
Microphone level automatic control
display
x
x
∗4
7
8
9
Date and time display
Frame rate display
—
—
x
—
x
∗1
Shutter speed display
x
10 Audio level meter display
11 Auto iris control display
12 Iris display
—
—
—
x
x
13 Zoom position display
14 Focus control information display
15 ND filter display
—
—
—
—
x
—
—
x
∗2
∗3
—
16 Gain display
x
17 AWB information display
18 Marker display
x
—
—
—
—
—
—
x
19 Optical Image Stabilizer display
20 Scene filename display
21 Remaining battery capacity display
22 Monitor audio level display
x
x
—
—
—
—
—
—
:
Displayed
x: Not displayed
—: Displayed depending on other settings
The item in in the MODE CHECK space appears when you press and hold the DISP/MODE CHK
button.
The item in in the DISPLAY space disappears when you press the DISP/MODE CHK button.
∗1
∗2
∗3
∗4
Not displayed when frame rate is set to 60i/50i.
0 dB is not displayed.
Only preset 3.2K, 5.6K and VAR are displayed.
If the date and time display appear simultaneously, they may not be removed even by pressing the
DISP/MODE CHK button.
50
Setup menu list
SCENE FILE screen
Display
mode
Item
Description of settings
SCENE
(Camera) Selects the settings (SCENE FILES) according to the variety of shooting
SELECT
circumstances.
You can read, save, and initialize these settings from MENU - SCENE FILE -
LOAD / SAVE / INIT.
F1, F2, F3, F4, F5, F6
OPERATION
TYPE
(Camera) Switches the shutter and frame rate operation to video type or film type.
FILM CAM: VFR operation is enabled. SLOW shutter speeds are disabled.
SYNCHROSCAN is displayed as an angle. Gain is displayed as ISO.
VIDEO CAM: VFR operation is disabled. SLOW shutter speeds are enabled.
SYNCROSCAN is displayed as 1/n. Gain is displayed as dB.
REC FORMAT
(Camera) Selects the recording format.
When SYSTEM FREQ = 59.94 Hz
PH 1080/24P and PH 720/24P represent native recording.
PH 1080/60i, PH 1080/30P, PH 1080/24P, PH 720/60P, PH 720/30P, PH 720/24P,
HA 1080/60i, HE 1080/60i
When SYSTEM FREQ = 50 Hz
PH 1080/50i, PH 1080/25P, PH 720/50P, PH 720/25P, HA 1080/50i, HE 1080/50i
VFR MODE
(Camera) ON:
OFF
Enables the VFR (Variable Frame Rate) mode.
Disables the VFR mode.
:
Functions only when REC FORMAT is set to 1080/24P, 1080/30P, or 1080/25P.
Functions only when OPERATION TYPE = FILM CAM
Does not function when SDI 24PsF is set to ON.
Audio cannot be recorded when VFR MODE = ON.
FRAME RATE
(Camera) Sets the FRAME RATE.
Operates only when OPERATION TYPE = FILM CAM.
You can make the settings from SHUTR/F.RATE on the rear side of the camera
also.
When SYSTEM FREQ = 59.94 Hz
12/15/18/20/21/22/24/25/26/27/28/30/32/34/36/40/44/48/54/60
When SYSTEM FREQ = 50 Hz
12/15/18/20/21/22/23/24/25/26/27/28/30/32/34/37/42/45/48/50
SYNCRO
SCAN
(Camera) Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the OPERATION lever toward the or will cause the values to change
at a faster rate.
When OPERATION TYPE = VIDEO CAM and SYSTEM FREQ = 59.94 Hz
• 60P/60i:
1/60.0…1/250.6
• 30P:
1/30.0…1/48.0…1/250.6
• 24P:
1/24.0…1/48.0…1/250.6
When OPERATION TYPE = VIDEO CAM and SYSTEM FREQ = 59.94 Hz
• 50P/50i:
1/50.0…1/250.0
• 25P:
1/25.0…1/48.0…1/250.0
When OPERATION TYPE = FILM CAM, “deg (angle)” Display
10.0d…172.8d…180.0d…360.0d (0.5d/div)
indicates the factory setting.
51
Setup menu list (continued)
SCENE FILE screen (continued)
Display
mode
Item
Description of settings
(Camera)
(Camera)
(Camera)
DETAIL LEVEL
Adjusts the level of the image outline correction (in the horizontal and vertical directions).
-7…0…+7
V DETAIL
LEVEL
Adjusts the level of outline correction in the vertical direction.
-7…0…+7
DETAIL
CORING
Adjusts the level of noise reduction of the detail signal.
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
-7…0…+7
(Camera)
(Camera)
(Camera)
(Camera)
(Camera)
(Camera)
(Camera)
CHROMA
LEVEL
Adjusts the chroma level.
-7…0…+7
CHROMA
PHASE
Adjusts the chroma level.
-7…0…+7
COLOR TEMP
Ach
Make fine adjustments to the color temperature (after white balance Ach adjustment).
-7…0…+7
COLOR TEMP
Bch
Make fine adjustments to the color temperature (after white balance Bch adjustment).
-7…0…+7
MASTER PED
A.IRIS LEVEL
DRS
Adjusts the master pedestal (black level of the image) as the basis for images.
-15…0…+15
Sets the desired AUTO IRIS level.
-6…0…+6
Selects the DRS (Dynamic Range Stretcher) function. It enables the dynamic
range to be expanded by compressing the level of the video signals in the high-
brightness areas where overexposure results during normal shooting.
OFF, 1, 2, 3
• The higher the number of the setting, the higher the compression level of the
high-brightness areas.
• The higher the number of the setting, the greater the interference in darker areas.
(Camera)
GAMMA
Selects the gamma curves.
HD NORM: This gamma setting is suitable for HD shooting.
LOW:
Makes a mellow image using the gamma curve that has a gentle
incline in low-brightness curve. The contrast sharpens.
SD NORM: This is the normal video setting carried over from the DVX100 series.
HIGH:
Expands the tone of dark parts and makes a brighter image using the
gamma curve that has a sharp incline in low-brightness curve. The
contrast softens.
B.PRESS: Makes the contrast sharper than LOW.
CINE-LIKE D: Uses a gamma curve designed to create cinema-like images.
CINE-LIKE V: Uses a gamma curve designed to create cinema-like images with
emphasized contrast.
• When you select CINE-LIKE gamma, we recommend setting the lens aperture
lower than normal image level (approximately 1/2) for optimal results.
(Camera)
KNEE
To avoid overexposure, select the compression level (knee point) of the high
intensity video signals received through the image pickup device.
AUTO: Sets the level automatically according to the received signals.
LOW: Low setting (Compression starts at approx. 80%)
MID:
Medium setting (Compression starts at approx. 90%)
HIGH: High setting (Compression starts at approx. 100%)
• Not available when a DRS value is set, or when GAMMA is set to CINE-LIKE.
indicates the factory setting.
52
SCENE FILE screen (continued)
Display
mode
Item
Description of settings
(Camera)
MATRIX
Selects the MATRIX table suitable for the desired color expression during shooting.
NORM1:
NORM2:
FLUO:
Suitable for shooting in the open air or under a halogen lamp.
Suitable for brighter colors than the NORM1 mode.
Suitable for shooting under fluorescent lights indoors.
CINE-LIKE: Suitable for cinema-like images.
(Camera)
(Camera)
SKIN TONE
DTL
Switches skin tone details ON or OFF. Select ON to reduce the skin tone details
and soften the skin tone.
ON, OFF
B/W MODE
Selects the black and white shooting function.
All recorded and output video signals are converted to black and white.
Color temperature adjustment modes, such as AWB, operate even when the B/W
MODE is ON and affect the black and white images.
It is recommended that you set the B/W MODE to ON after adjusting and
checking the white balance when the B/W MODE is OFF.
ON, OFF
(Camera)
(Camera)
CARD READ
CARD WRITE
Reads scene files from the SD Memory Card.
Slot1: Reads scene files (all scenes from F1 to F6) saved on the SD Memory
Card of Slot 1 after selecting the setting values.
Slot2: Reads scene files (all scenes from F1 to F6) saved on the SD Memory
Card of Slot 2 after selecting the setting values.
NO:
Returns to the previous screen.
Saves scene files on the SD Memory Card.
Slot1: Saves the setting values of scene files (all scenes from F1 to F6) on the
SD Memory Card of Slot 1.
Slot2: Saves the setting values of scene files (all scenes from F1 to F6) on the
SD Memory Card of Slot 2.
NO:
Returns to the previous screen.
(Camera)
(Camera)
LOAD/SAVE/
INIT
LOAD: Loads the scene file settings saved by this camera.
SAVE: Saves the updated scene file settings.
INITIALIZE: Returns the settings of the scene file selected from the SCENE
FILE item to factory settings.
NO:
Returns to the previous screen.
NAME EDIT
Edits the name of the scene file selected from the MENU/SCENE FILE/SCENE SELECT.
YES, NO
indicates the factory setting.
SW MODE screen
Display
mode
Item
Description of settings
(Camera)
FUNCTION
KNOB
Sets the function assigned to the AREA operation of the FUNCTION KNOB.
INH:
No function is assigned.
FOCUS:
IRIS:
YGET:
AUTO FOCUS / FOCUS BAR function
AUTO IRIS / IRIS METER function
YGET (Luminance measurement) function
FOCUS/IRIS:Simultaneous operation of FOCUS and IRIS described above
FOCUS/YGET: Simultaneous operation of FOCUS and YGET described above
indicates the factory setting.
53
Setup menu list (continued)
SW MODE screen (continued)
Display
mode
Item
Description of settings
(Camera)
(Camera)
(Camera)
(Camera)
LOW GAIN
MID GAIN
HIGH GAIN
ATW
Sets the gain value assigned to the L position of the GAIN switch.
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, ISO400, ISO500, ISO640, ISO800, ISO1000,
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
Sets the gain value assigned to the M position of the GAIN switch.
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, ISO400, ISO500, ISO640, ISO800, ISO1000,
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
Sets the gain value assigned to the H position of the GAIN switch.
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, ISO400, ISO500, ISO640, ISO800, ISO1000,
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
Sets the operation of the ATW (Auto Tracking White) function assigned to the
WHITE BAL switch. When the ATW function is allocated to the USER button, the
operation remains effective.
Ach:
Bch:
Activates the ATW function when the WHITE BAL switch is set to A.
Activates the ATW function when the WHITE BAL switch is set to B.
PRST: Activates the ATW function when the WHITE BAL switch is set to PRST.
OFF: Deactivates the ATW function.
(Camera)
(PB)
IRIS DIAL
Sets the rotation direction and aperture control of the IRIS dial. (In MANUAL IRIS
mode)
DOWN OPEN: The aperture opens when the IRIS dial is turned downward.
UP OPEN: The aperture opens when the IRIS dial is turned upward.
indicates the factory setting.
54
SW MODE screen (continued)
Display
mode
Item
Description of settings
(Camera)
(PB)
USER1 SW
Sets the function assigned to the USER1 button.
INH:
No function is assigned
REC CHECK
:
Performs recording check.
FACE DETECT
:
This is the face detection function. Performs the AUTO IRIS /
AUTO FOCUS operation centering around the detected face.
Enabled when both focus control and iris control are set to
auto.
FA:
Displays the edges in red. (Only for LCD/EVF) During
operation, the LCD/EVF borders are displayed in red.
Records still images. Does not operate during movie recording
and when the PRE REC function is in use.
Switches the ATW function ON or OFF.
CAPTURE:
ATW:
ATW LOCK:
Fixes the white balance value when the button is pressed
during ATW. Press again to perform ATW.
SHOT MARK:
Shot mark recording. (Page 13) Takes effect during recording,
thumbnail display, and clip display.
INDEX:
LAST CLIP:
Index recording (Page 13) Takes effect during recording.
Deletes the last recorded clip. (Page 13)
• After recording, clips cannot be deleted by switching to PB or PC mode, by
changing the recording format, or by turning off the camera.
BACKLIGHT
SPOTLIGHT
:
:
Auto iris control for the backlight compensation.
Switches auto iris control ON or OFF for the spotlight.
BLACKFADE: Blackfade (Page 11)
WHITEFADE: Whitefade (Page 11)
(Camera)
(PB)
USER2 SW
USER3 SW
WFM
Assign a function to the USER2 button.
The setting contents are the same as USER1.
ATW LOCK
(Camera)
(PB)
Assign a function to the USER3 button.
The setting contents are the same as USER1.
REC CHECK
(Camera)
Switches the waveform display that appears when the WFM button is pressed.
WAVE:
VECTER:
Displays as a waveform.
Displays as a vector.
WAVE/VECTOR: Each time the button is pressed, the setting changes in the
following order: OFF → WAVE → VECTOR → OFF.
(Camera)
(Camera)
S/S SW INH
1: Disables the START/STOP1 SW.
2: Disables the START/STOP2 SW.
NO: Does not disable any switch. Use to prevent erroneous operation of the
unnecessary START/STOP SW.
FACE
FRAMING
Frames the faces detected during operation of the FACE DETECT function with
the USER SW.
The maximum number of detected frames is 15, and faces bigger and closer to
the center of the screen are given priority.
OFF:
PRIMARY: Only the high-priority frames are displayed.
ALL: Cannot be set when you are using INTERVAL REC.
indicates the factory setting.
Frames are not displayed.
55
Setup menu list (continued)
RECORDING SETUP screen
Display
mode
Item
Description of settings
Sets PRE RECORDING to ON or OFF.
(Camera)
PREREC
MODE
ON:
Enables PRE REC function.
Disables PRE REC function.
OFF:
• TCG is set to FREE RUN.
• Cannot be set when you are using INTERVAL REC.
(Camera)
INTERVAL REC
Scenes moving slowly over a long period of time are recorded as short movies
by providing a recording interval. One frame is recorded in each recording time
period that has been set, and 24 frames (PAL 25 frames) form a one-second
video. When you set INTERVAL REC, the following items are set automatically:
PH Mode
1080/24P (When SYSTEM FREQ = 59.94)
1080/25P (When SYSTEM FREQ = 50)
• TC RECRUN
Fixed to NDF
• Audio recording is not performed.
OFF, 1SECOND, 10SECONDS, 30SECONDS, 1MINUTE, 2MINUTES
(Camera)
(Camera)
RELAY REC
ON:
Relay recording performed. When the SD card used for recording has
no remaining space, recording continues in another SD card if an SD
card that can be used for recording is inserted in another SD card slot.
Relay recording not performed. Recording stops when the target SD
card has no remaining space.
OFF:
PH AUDIO
MODE
Selects the format of audio recording when REC FORMAT = PH.
LPCM: Recording is performed in uncompressed LPCM.
AC3:
Recording is performed in Dolby AC3 format.
• Fixed to AC3 for other than the PH mode.
• If LPCM is set, playback is not possible in our previous models, such as AG-
HMR10.
(Camera)
MIC ALC
ON:
OFF:
Enables mic level auto control.
Disables mic level auto control.
Audio distortion can be reduced at high input levels. To adjust the recording level
of audio signals (regardless of this setting), use the AUDIO control knobs.
(Camera)
(Camera)
MIC GAIN1
MIC GAIN2
Sets the input level of the external microphone connected to the INPUT 1
terminal.
-50dB, -60dB
Sets the input level of the external microphone connected to the INPUT 2
terminal.
-50dB, -60dB
indicates the factory setting.
56
TC/UB SETUP screen
Display
mode
Item
Description of settings
(Camera)
TC MODE
Selects the correction mode of the internal time code when the time code of the
internal time code generator is recorded.
DF:
Uses the drop frame mode.
NDF:
Uses the non-drop frame mode.
• TC MODE is automatically set to NDF when you set recording frame rate of
recording format to 24P.
• Takes effect only when SYSTEM FREQ = 59.94 Hz. PH 1080/24P and PH
720/24P represent native recording.
(Camera)
(Camera)
TCG
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode. A
slight time error may occur when switching to PB mode if the frame
rate is set to 24P.
REC RUN: The time code is advanced only when recording.
TC PRESET
Sets the initial time code.
Set the frame value to 0 or a multiple of 4 when you set recording frame rate
of recording format to 24P. If any other value is set, the recorded time code will
mismatch.
YES, NO
(Camera)
(Camera)
UB PRESET
EXT TC LINK
Sets the user information.
YES, NO
Synchronizes the initial time code value during multi-camera shooting. (SLAVE
camera time codes are synchronized to the master internal TCG value.
MASTER:
SLAVE:
Sets the mode to master mode.
Sets the mode to slave mode. When the COUNTER RESET/TC
SET button is pressed, input time codes are synchronized to the
internal TCG.
NO:
Returns to the previous screen.
• MASTER and SLAVE mode settings are in effect only when this menu is open.
When the menu is closed, EXT TC LINK is automatically canceled.
indicates the factory setting.
57
Setup menu list (continued)
AV IN/OUT SETUP screen
Display
mode
Item
Description of settings
(Camera)
(PB)
SDI & HDMI
OUT SEL
Sets the output video format of the SDI&HDMI OUT terminal.
1080i/720P: Output at the resolution set in REC FORMAT.
DOWNCONV:
SDI is output at 480i, while HDMI is output at 480p. (When
SYSTEM FREQ = 59.94) SDI is output at 576i, while HDMI is
output at 576p. (When SYSTEM FREQ = 50)
(Camera)
(PB)
SDI OUT
Sets the video output from the SDI terminal.
ON:
Video is output from SDI OUT. At this point, simultaneous LCD display
and EVF display is not supported. Close the LCD monitor when using
EVF.
OFF:
No video is output from SDI OUT.
(Camera)
(PB)
SDI 24PsF
Sets the video format output from SDI OUT to 24PsF.
ON:
Operates only when REC FORMAT = 1080 24p. Does not operate
during VFR operation (when the recording format is other than 24p).
The HDMI output stops during 24Psf output.
OFF:
SDI output is in the 1080 60i format.
• This item is not available when SYSTEM FREQ = 50Hz.
(Camera)
(PB)
SDI EDH
Sets superimposition of EDH on to the SDI output during SD SDI output.
ON:
Superimposes EDH.
OFF:
Does not superimpose EDH.
(Camera)
(PB)
DOWNCON
MODE
Switches down-conversion output mode.
Side-crop mode (Crops the left and right edges.) Images may
SIDE CROP:
extend beyond the boundaries of the screen and be partially unable
to be seen when outputting from the +H227A/V terminal or SDI
OUT terminal (during DOWNCONV), or the HDMI terminal (during
DOWNCONV).
LETTER BOX: Letterbox mode (Adds black bands at the top and bottom of the
image.
SQUEEZE: Squeeze mode (Squeezes images horizontally.
(Camera)
(Camera)
HP MODE
Selects the sound heard from the headphones.
LIVE: The sound input from the microphone is output as is. This setting is
selected when delays in the sound are annoying.
RECORDING:
The sound in the status to be recorded (the sound synchronized with the
images) is output.
TEST TONE
Sets test tone output to channels 1, 2, 3, and 4 when BARS setting is ON.
ON:
Outputs the test tone.
OFF:
Does not output the test tone.
(Camera)
(PB)
VIDEO SETUP
Sets the setup level of video signals.
0%: VIDEO OUT terminal output and recording setup levels will both be set
to 0%.
7.5%A: VIDEO OUT terminal output setup level will be set to 7.5%, while
recording setup level will be set to 0%.
• This item is not available when SYSTEM FREQ = 50Hz.
(Camera)
(PB)
AUDIO OUT
Sets the audio signals to output from the AUDIO OUT terminal (A/V OUT).
CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals
CH1:
CH2:
CH1 terminal = CH1 signals, CH2 terminal = CH1 signals
CH1 terminal = CH2 signals, CH2 terminal = CH2 signals
• When an SD Memory Card containing 5.1 channel content recorded on another
equipment is played back on the camera, it is down-mixed to 2 channels when
output through the AUDIO OUT and headphone terminals.
indicates the factory setting.
58
DISPLAY SETUP screen
Display
mode
Item
Description of settings
(Camera)
(Camera)
(Camera)
ZEBRA
DETECT 1
Selects the brightness level of the right-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
ZEBRA
DETECT 2
Selects the brightness level of the left-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
Y GET
Sets the display of the marker used for displaying the luminance level to ON or
MARKER
OFF.
Select ON to display the marker by pressing the ZEBRA button.
ON, OFF
(Camera)
SAFETY ZONE
Sets the SAFETY ZONE.
90%:
4:3:
14:9:
90% display at 16:9
100% display at 4:3
100% display at 14:9
1.85:1: 100% display t 1.85:1
2:1: 100% display at 2:1
2.35:1: 2.35:1 cinemascope display
GRID: 16:9 angular field of view with nine grid lines
OFF:
The SAFETY ZONE is not displayed.
(Camera)
(Camera)
CENTER
MARKER
Sets the CENTER MARKER. Select ON to display the CENTER MARKER.
ON, OFF
FOCUS BAR
Sets the FOCUS ASSIST bar display to ON or OFF. Select ON to display the
FOCUS ASSIST bar.
ON, OFF
(Camera)
REC COUNTER
Selects counter operation during recording.
TOTAL: The count continues to increase until the COUNTER RESET button is
pressed to reset it.
CLIP: Resets the counter at start of recording and counts the time of each
recording session.
• In the PB mode, the operation is always in CLIP mode.
(Camera)
(PB)
VIDEO OUT
OSD
Select ON to output the information displayed on the screen together with the
signals from the VIDEO OUT jack.
ON, OFF
• Some items are not output from the A/V terminal.
(Camera)
IRIS METER
Sets the display of the IRIS METER.
ON:
As regards the brightness of the image, displays the difference with
respect to the optimum value judged by the camera. The bar appears
on the right: The image is too bright. The bar appears on the left:: The
image is too dark.
OFF:
The IRIS METER is not displayed.
(Camera)
(PB)
DATE/TIME
Sets whether to display the date and time on the screen and whether to output
from the VIDEO OUT jack.
OFF:
The date and time are not displayed.
TIME: The time is displayed.
DATE: The date is displayed.
TIME & DATE:
The date and time are displayed.
(Camera)
(PB)
DATE FORMAT
Changes the style of displaying the year, month, and day.
Y-M-D: Year/Month/Day
M-D-Y: Month/Day/Year
D-M-Y: Day/Month/Year
indicates the factory setting.
59
Setup menu list (continued)
DISPLAY SETUP screen (continued)
Display
mode
Item
Description of settings
Select ON to display the audio level meter.
(Camera)
(PB)
LEVEL METER
ON, OFF
(Camera)
ZOOM &
FOCUS
Selects the unit of zoom and focus values.
OFF, NUMBER, mm/m, mm/feet
• Use the mm/feet or mm/m display only as a general guideline because it is not
entirely accurate.
• When you are using a lens that has no communication connection between
the camera and lens through the use of a mount adaptor, the zoom and focus
values are not displayed.
(Camera)
(PB)
CARD &
BATTERY
Select ON to display the remaining SD Memory Card recording capacity and
remaining battery charge.
ON, OFF
(Camera)
OTHER
Select how much information to display on the viewfinder and LCD monitor.
DISPLAY
OFF, PARTIAL, ALL
(Camera)
(PB)
LCD
BACKLIGHT
Adjusts the backlight of the LCD monitor.
+1, 0, - 1, - 2, - 3
+1:The backlight becomes brighter.
- 3:The backlight becomes the darkest.
(Camera)
(PB)
LCD SET
Adjusts the display level of images on the LCD monitor.
BRIGHTNESS
COLOR
CONTRAST
(Camera)
(PB)
EVF SET
Adjusts the display level of images on the viewfinder.
BRIGHTNESS
COLOR
CONTRAST
(Camera)
SELF SHOOT
EVF MODE
Selects the LCD mirror mode for self-portrait shooting.
Selecting MIRROR displays the left and right side of the LCD monitor image
inverted during self-portrait shooting.
NORMAL, MIRROR
(Camera)
(PB)
Switches the screen display of images.
AUTO: If you open the LCD monitor, images on the viewfinder disappear.
ON:
Images are always displayed on the viewfinder.
• When SDI OUT = ON, regardless of this item, AUTO settings are operated
forcibly.
(Camera)
EVF COLOR
EVF COLOR (Camera) Switches viewfinder images to color or black and white.
ON:
Color
OFF:
Black and white
indicates the factory setting.
60
CARD FUNCTIONS screen
Display
mode
Item
Description of settings
Formats the SD Memory Card.
(Camera)
(PB)
CARD
FORMAT
Slot1: Formats the SD Card inserted in Slot 1.
Slot2: Formats the SD Card inserted in Slot 2.
NO:
Returns to the previous screen.
(Camera)
(PB)
CARD STATUS
Displays the SD Memory Card status.
Slot1: Displays the information about the SD Card inserted in Slot 1.
Slot2: Displays the information about the SD Card inserted in Slot 2.
NO:
Returns to the previous screen.
(PB)
CLIP
Displays information about the selected clip.
PROPERTY
YES:
NO:
Displays clip information.
Returns to the previous screen.
USER FILE screen
Display
Item
Description of settings
mode
(Camera)
(PB)
CARD READ
Reads the user files saved on the SD Memory Card.
Slot1: Reads the user files from the SD Card inserted in Slot 1.
Slot2: Reads the user files from the SD Card inserted in Slot 2.
NO:
Returns to the previous screen.
(Camera)
(PB)
CARD WRITE
Saves the user files on the SD Memory Card. You can also add a title to the
saved files.
Slot1: Saves the user files on the SD Card inserted in Slot 1.
Slot2: Saves the user files on the SD Card inserted in Slot 2.
NO:
Returns to the previous screen.
(Camera)
(PB)
LOAD/SAVE/
INIT
LOAD: Loads the settings in a previously stored user file.
SAVE: Saves the updated user file settings.
INIT:
NO:
Returns the settings in the user file to factory settings.
Returns to the previous screen.
• After a LOAD or INITIALIZE operation, turn OFF the POWER switch of the
camera and then turn it ON again to make the new settings available.
• The INITIALIZE operation does not change the TIME ZONE settings (Page 63).
indicates the factory setting.
61
Setup menu list (continued)
META DATA screen
Display
mode
Item
Description of settings
(Camera)
CARD READ
Loads the metadata recorded on the SD Memory Card on to the unit.
SLOT1, SLOT2, NO
• “NO FILE’ is displayed when no metadata is recorded on the SD Memory Card.
(Camera)
RECORD
Sets whether to record the metadata to be loaded on the unit simultaneously on
a SD Memory Card.
ON:
Records simultaneously
OFF:
Does not record simultaneously
(Camera)
USER CLIP
NAME
Selects the method of recording the USER CLIP NAME.
TYPE1: The user clip name is the same as the CLIP NAME if no uploaded
metadata or data exists.
TYPE2: The user clip name is the same as the CLIP NAME if no combination of
data and COUNT value is uploaded, or if no uploaded data exists.
(Camera)
(Camera)
(Camera)
META DATA
PROP
Displays the metadata recorded in the unit.
YES, NO
CLIP
COUNTER RST
Resets the COUNT value to 1.
YES, NO
META INT SET
Initializes the metadata recorded in the unit.
All settings, including the ON or OFF setting for RECORD are now cleared.
YES, NO
OTHER FUNCTIONS screen
Display
mode
Item
Description of settings
(Camera)
LENS CHECK
ON:
Checks the communication status with the lens. Video shooting is not
performed if checking is not proper.
OFF:
Does not check the communication status with the lens.
• It is recommended to set LENS CHECK to ON when you are using lenses
conforming to the Micro Four Thirds and Four Thirds standard.
• When you are using a lens that has no communication connection between the
camera and lens through the use of a mount adaptor, video shooting is enabled
when you set this item to OFF.
(Camera)
(PB)
IR REMOTE
Sets the operations of the supplied remote control unit.
ON:
Accepts commands from the remote control.
• Note that if the same type of remote control is used near the
unit, the unit may receive commands from the other remote
control, during shooting for example, and suddenly operate in an
unexpected manner.
OFF:
Does not accept commands from the remote control.
(Camera)
TALLY LAMP
CLOCK SET
Sets lighting of the tally lamp.
FRONT: The front tally lamp (microphone side) lights.
REAR: The rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF:
No tally lamp lights.
(Camera)
(PB)
Sets the built-in calendar of the camera.
indicates the factory setting.
62
OTHER FUNCTIONS screen (continued)
Display
mode
Item
Description of settings
TIME ZONE
(Camera) Adds to or deducts from GMT the time value of -12:00 to +13:00 in 30-minute
(PB)
steps. (Refer to the table below.)
+00:00
Time
difference
Time
difference
Area
Area
+ 00:00
– 01:00
– 02:00
– 03:00
– 04:00
– 05:00
– 06:00
– 07:00
– 08:00
– 09:00
– 10:00
– 11:00
– 12:00
+ 13:00
+ 12:00
+ 11:00
+ 10:00
+ 09:00
+ 08:00
+ 07:00
+ 06:00
+ 05:00
+ 04:00
+ 03:00
+ 02:00
+ 01:00
Greenwich
Azores Islands
Mid-Atlantic
Buenos Aires
Halifax
– 00:30
– 01:30
– 02:30
– 03:30
– 04:30
– 05:30
– 06:30
– 07:30
– 08:30
– 09:30
– 10:30
– 11:30
+ 12:30
+ 11:30
+ 10:30
+ 09:30
+ 08:30
+ 07:30
+ 06:30
+ 05:30
+ 04:30
+ 03:30
+ 02:30
+ 01:30
+ 00:30
Newfoundland Island
New York
Chicago
Denver
Los Angeles
Alaska
Marquesas Islands
Hawaii
Midway Island
Kwajalein
Norfolk Island
Lord Howe Island
Darwin
New Zealand
Solomon Islands
Guam
Tokyo
Beijing
Yangon
Mumbai
Kabul
Bangkok
Dacca
Islamabad
Abu Dhabi
Moscow
Tehran
Eastern Europe
Central Europe
POWER SAVE (Camera) Selects the power-saving mode when no operation is performed from the
Operation lever, MENU button, AUDIO MON/ADV button, USER button, or
START/STOP button for about five minutes when an SD Memory Card has been
inserted in the CAM mode.
ON:
OFF:
Power supply to the camera is turned OFF.
Power supply to the camera is not turned OFF.
• Even when POWER SAVE has been set to ON, the power supply does not
turn OFF when an SD Memory Card has not been inserted, when the camera-
recorder is in the PB or PC mode, or when the AC adaptor is connected.
(Camera)
(PB)
LANGUAGE
Sets the Menu language.
ENGLISH, Français, Español
(Camera)
(PB)
SYSTEM FREQ
Sets the system frequency
59.94Hz:
50Hz:
NTSC region
PAL region
(Camera)
SYSTEM INFO
LENS INFO
Displays the version of the system in this camera.
(Camera)
(PB)
Displays the version of the Micro Four Thirds and Four Thirds lenses that have
been installed.
(Camera)
MENU INIT
Returns the menu settings (scene files and user files) to factory default settings.
• The TIME ZONE settings do not return to factory default settings.
indicates the factory setting.
63
Setup menu list (continued)
OTHER FUNCTIONS screen (continued)
Display
mode
Item
Description of settings
Displays the power-on time (a 5-digit figure).
(Camera)
(PB)
OPERATION
TIME
(Camera)
UPDATE
Updates the system.
For details on the update information, see our home page
(Camera)
LENS UPDATE
Updates the lens firmware.
For details about the update information, see the home page of each lens
manufacturer.
indicates the factory setting.
PLAY SETUP screen
Display
mode
Item
Description of settings
PB FORMAT
(PB)
Sets the playback format.
When SYSTEM FREQ = 59.94 Hz
1080/60i (30P), 1080/24P, 720/60P(30P), 720/24P
When SYSTEM FREQ = 50 Hz
1080/50i(25P), 720/50P(25P)
• The REC FORMAT setting in the CAM mode prior to migrating to the PB mode
becomes the default value of the PB FORMAT.
REPEAT PLAY (PB)
RESUME PLAY (PB)
ON, OFF
When ON is selected, supported clips are played repeatedly.
ON, OFF
When ON is selected, playback resumes from the video position where clip
playback had stopped.
SKIP MODE
(PB)
Selects the starting position for cued playback after pausing.
CLIP: Stops playback at the beginning of the previous clip.
CLIP & INDEX:
Stops at the beginning of the clip and the INDEX.
indicates the factory setting.
64
THUMBNAIL screen
Display
mode
Item
Description of settings
(PB)
THUMBNAIL
MODE
Selects the thumbnail display method.
ALL: Displays all clips.
SAME FORMAT: Displays clips in the same recording format.
MARKER:
INDEX:
Displays clips with shot marks.
Displays clips with an INDEX.
(PB)
(PB)
INDICATOR
Sets whether or not to display the indicator.
ON:
Displays the indicator
OFF:
Does not display the indicator
DATA DISPLAY
Selects the information to be displayed in the time display area of the clips.
TC:
Time code
UB:
TIME:
DATE:
User information
Shooting time
Shooting date
DATE & TIME: Shooting date and time
(PB)
DATE FORMAT
Selects the order for displaying the recording date/time when DATA DISPLAY is
set to either DATE or DATE & TIME.
Y-M-D: Year/Month/Day
M-D-Y: Month/Day/Year
D-M-Y: Day/Month/Year
indicates the factory setting.
OPERATION screen
Display
mode
Item
Description of settings
(PB)
DELETE
Deletes clips.
ALL CLIPS: Deletes all clips.
SELECT:
NO:
Deletes only the selected clips.
Returns to the previous screen.
• Clips for which CLIP PROTECT is specified are not deleted.
(PB)
(PB)
INDEX
Adds an INDEX to a clip, or deletes the INDEX.
YES:
NO:
Displays the INDEX
Does not display the INDEX
CLIP PROTECT
Protects clips to prevent accidental deletion.
YES:
NO:
Enables clip protection or cancels protection.
Returns to the previous screen.
• Formatting the memory card will delete all clips even if they are protected.
(PB)
COPY
Copies clips (Page 36).
indicates the factory setting.
65
Before calling for service
Power supply
There’s no power.
• Make sure the battery and AC adaptor are connected properly.
Check the connections again.
P25 of
Vol.1
Power shuts off for no
apparent reason.
• To prevent the battery from running down needlessly, the camera-
recorder automatically turns off when the camera-recorder has
been left in the recording pause mode for more than 5 minutes.
Check the settings in the OTHER FUNCTIONS screen, POWER
SAVE.
P63
Power goes off as soon as
it is turned on.
• The battery may have run out.
If the remaining battery charge display is blinking or
appears, the battery has run out.
P24 of
Vol.1
Either recharge the battery or replace the discharged battery with a
fully charged one.
Battery
The battery runs down
quickly.
• Make sure the battery is fully charged.
Keep charging until the AC adaptor’s CHARGE lamp goes out.
• Are you using the battery in a cold place?
P23 of
Vol.1
The battery is affected by the ambient temperature. Its operating
time is reduced in low-temperatures.
• The battery may have reached the end of its service life. The
battery will become unchargeable. The battery has a certain
service life which varies depending on how the battery is used. If
the battery operates only for a short period even when it is charged
adequately, it has reached the end of its service life.
The battery cannot be
charged.
• The battery cannot be charged if the DC cord is connected.
Disconnect it.
P23 of
Vol.1
The remaining battery
capacity is not displayed
correctly.
• The remaining battery capacity display is merely a guideline. To
ensure that remaining battery capacity is displayed correctly, use
the battery completely from a fully-charged state, and charge
the battery again. (Remaining battery capacity may still not be
displayed correctly if the battery has been used for long periods in
high or low temperatures, or if the battery has been recharged a
large number of times.)
—
Shooting
Cannot start shooting.
• Make sure the POWER switch is ON.
P27 of
Vol.1
Cannot focus automatically. • Make sure the camera is in manual focus mode. You can focus
automatically when the auto focus mode is selected.
• Auto focus is not available when using the VFR function.
• Auto focus is not available at slow shutter speed settings.
• Depending on the lens, the auto focus function may not be
available.
P39 of
Vol.1
• You may be shooting a scene where it is difficult to bring the subject
into focus in the auto focus mode.
If this is the case, focus in the manual focus mode.
It may be hard to bring the subject into focus when
ā both close and distant objects are to be shot
ā shooting through a dirty window
ā shooting in a dark place
ā there are sparkling or shiny objects around the subject
ā the subject is moving fast
ā shooting a scene with minimal contrast
66
Recording
Cannot record even
through the SD Memory
Card is inserted correctly.
• Is the write-protect switch on the SD Memory Card in the “LOCK”
position? The card cannot be recorded to if the switch is in the
“LOCK” position.
P38 of
Vol.1
• Is the remaining memory available on the SD Memory Card
extremely low? Please save contents onto different media and
delete unneeded data from the card, or use a new card instead.
• Has the SD Memory Card been correctly formatted? Alternatively, is P36 of
the card of a format that is incompatible with this camera? Reformat
the card with the camera.
Vol.1
• 8 MB to 16 MB SD Memory Cards cannot be used for shooting
movies.
P13 of
Vol.1
Recording stops by itself.
• Is your SD Memory Card compatible with use for video recording?
Always use an SD Memory Card compatible with use for video
recording.
P12 of
Vol.1
Editing
Cannot read the data on the • Make sure the SD Memory Card is formatted correctly.
P36 of
Vol.1
SD Memory Card.
If it is not, format the card in the unit.
Cannot perform nonlinear
editing.
• Check the specifications of your computer and connecting cable.
P42
Cannot dub onto an
external device.
• Make sure the external device is connected correctly.
P42
Displays
Something is wrong with
the time code display.
• The time code display may not register a regular count if a clip is
played in the reverse slow mode. This is normal.
—
Playback
Cannot play even when I
press the play button.
• Make sure the PB lamp is on (press the mode button).
No kind of playback operation can be performed unless this lamp
is on.
P28
—
Mosaic-like noise appears
when I cue or review a clip.
• This noise is inherent to digital video technology. This is normal.
Images do not appear on
the television even though
I have connected the
• Make sure the input selector on your television is set to video input.
Read the television’s instructions carefully and select the correct
video input connector for the camera-recorder.
—
camera-recorder properly.
Cannot hear any sound
from the camera-recorder’s
speaker.
• You may have turned down the camera-recorder’s volume control
too far.
Adjust the volume level using the AUDIO MON/ADV button +.
P40
(Continued on the next page)
67
Before calling for service (continued)
PC connection
Computer does not
recognize camera when
USB connection cable is
connected.
• Check the operating environment.
• If your computer has multiple USB terminals, please try connecting
the camera to a different USB terminal.
• Switch the camera’s power off and back on again, and reconnect
the USB connection cable.
P42
—
An error message appears
on the computer when the
USB connection cable is
disconnected.
• To disconnect the USB connection cable safely, double-click the
icon in the task tray, and follow the instructions on the screen.
Other
The remote control does
not work.
• The battery in the remote control may have run out.
If the remote control fails to work even if it is operated close to the
remote control sensor of the camera-recorder, it means that the
battery has run out. Replace it with new one.
P23 of
Vol.1
• Is the IR REMOTE item on the setting menu OTHER FUNCTIONS
screen set to OFF?
There is a rattling sound
when the camera-recorder
is tilted back and forth.
• This is the sound of the lens moving. This is not a fault. No sound
should be heard when the camera’s power is switched on.
—
—
A clicking sound is heard
when the power is turned
on or when the PB mode is
switched to the CAM mode.
• This initialization operation is performed when the camera starts up.
It occurs due to the construction of the camera and is not indicative
of any trouble.
The SD Memory Card
screen appears strange.
• The data on the card could be corrupted. Data can be corrupted by
static electricity and electromagnetic waves. Please always save
important data to a computer or other storage media.
—
—
The SD Memory Card
cannot be used even after
formatting.
• There could be a fault with the camera or with the SD Memory
Card. Please consult the place of purchase. Always use only SD
Memory Cards of 512 MB - 32 GB with this camera.
The camera does not
recognize the SD Memory
Card even though it is
inserted correctly.
• Was the inserted SD Memory Card originally formatted with a
computer? Always use this camera to format SD Memory Cards.
Please be aware that, when an SD Memory Card is formatted, all
data recorded on the card will be erased and will not be restorable.
P36 of
Vol.1
The SD Memory Card is not • Please check that the device is compatible with the capacity or type
P12 of
Vol.1
recognized when inserted
into other devices.
(SD Memory Card/SDHC Memory Card/SDXC Memory Card) of
the SD Memory Card that you are using.
For details, please consult the device’s own operating instructions.
68
The changeover between clips may not always be smooth when playing back multiple clips in succession.
Video may momentarily pause when playing back multiple clips in succession in circumstances such as those
detailed below.
■Mixture of different recording formats
Recording mode = PH mode
Playback format = 1080/60i(30P)
Recording format
PH 1080/60i
Recording format
PH 1080/60i
Recording format
PH 720/60P
Recording format
PH 1080/60i
Playback is smooth.
Not played back as clip is
of different format.
Video pauses
momentarily during clip
changeover.
■Mixture of different recording modes
Recording format = 1080/60i
Playback format = 1080/60i(30P)
Recording format
PH 1080/60i
Recording format
HA 1080/60i
Recording format
HE 1080/60i
Recording format
HA 1080/60i
Video pauses momentarily during clip changeover.
■Some clips have been recorded using PRE REC function or VFR function
PRE REC recording
VFR shooting
PRE REC recording
VFR shooting
Normal recording
Normal recording
Video pauses momentarily during clip changeover.
Playback is smooth when changing
from PRE REC-recorded clip to
normally-recorded clip.
■Some clips have a recording time of less than 3 seconds
Recording time is
Recording time is
Recording time is
more than 3 seconds
less than 3 seconds
more than 3 seconds
Playback is smooth.
Video pauses momentarily during clip changeover.
69
Updating the firmware incorporated into the unit
The firmware can be updated using either of the following two methods.
Checking the current version of firmware and performing the update using the dedicated tool
(P2_Status_Logger)
1
PASS (P2 Asset Support System) is only available to customers who have completed customer
registration with Panasonic.
Log in to PASS and use the dedicated tool (P2_Status_Logger) to check the version information of the
firmware on the unit and download links to pages containing the necessary firmware.
For further information about downloading and using P2_Status_Logger, log in to PASS and refer to the
relevant pages.
Besides access to PASS, completing customer registration has a number of other benefits. For further
details, refer to the PASS (P2 Asset Support System) website (http://panasonic.biz/sav/pass_e/).
Checking the current version of the firmware using the unit and performing the update
2
From the OTHER FUNCTIONS menu page, check the current version of firmware on the unit using
the SYSTEN INFO screen. Then, access the website listed below for the latest firmware-related
information and download firmware as required.
• The update is completed by loading the downloaded file onto the unit via an SD memory card. For
further details about the updating methods, refer to the following website.
• Be sure to use a compatible SD memory card. The unit is compatible with SD memory cards based on
the SD, SDHC and SDXC standards. Also, be sure to format the memory card using the unit before
use.
70
Cleaning
When cleaning, do not use benzene or thinner.
• Using benzine or paint thinners may deform the
camera-recorder and/or cause the surface finish
to peel off.
• Before proceeding with maintenance, remove the
battery or disconnect the AC cord from the power
outlet.
Eye cup holder
Eye cup
• Use a soft, clean cloth to wipe the camera-
recorder. To remove stubborn dirt, wipe the
camera-recorder with a cloth moistened with
kitchen detergent that has been diluted with
water and then use a dry cloth to take up the
remaining moisture.
Projections
Cleaning the Viewfinder
If there is dust inside the viewfinder, remove the
eye cup holder and get rid of the dust.
• The interior of the eye cup holder is specially
finished, so do not ever wipe it. If there is dust on
it, blow it off with an air blower.
• Remove the eye cup holder with the eye cup
attached by rotating it counterclockwise. (It will
be tightly screwed on.) When you do this, tilt the
viewfinder slightly upward.
• To mount the eye cup holder, align the ridges
and grooves of the eye cup holder and camera-
recorder, and turn clockwise until the holder
clicks into place.
71
Storage Precautions
Before storing the camera-recorder, remove both
the SD Memory Card and battery.
Store all of these items in a place with low humidity
and relatively constant temperature.
[Recommended temperature range: 15°C to 25°C]
[Recommended relative humidity: 40% to 60%]
SD Memory Cards
• After ejecting an SD Memory Card from the unit,
be absolutely sure to stow it in its own case.
• Do not leave SD Memory Cards in areas where
corrosive gases, etc. are present.
• Do not leave the cards inside vehicles, in places
exposed to direct sunlight or in other places
where the temperature is high.
Camera-recorder
• Wrap the camera-recorder in a soft cloth to keep
the dust off.
• Do not leave the cards where the humidity level
is high or where there are high concentrations
of dust.
Battery
• The battery life is shortened in places with
extreme temperatures.
• Storing the battery in a location with oily vapors
or high dust concentrations may corrode the
terminals or cause other damage, leading to
malfunction.
• Keep metal objects (such as necklaces and
hairpins) away from the terminals.
Short-circuiting may occur across the
terminals, causing the battery to heat up, and
you may seriously burn yourself if you touch
the battery in this state.
72
How to handle data recorded on SD Memory Card
Data recorded in AVCHD format offers excellent
compatibility with computers due to the file type,
Drive: \
PRIVATE
but since this format includes not only video
and audio data, but also a variety of important
information, the folder structure will consist of file
associations as illustrated in the diagram on the
right. If even part of this information is modified or
deleted, the data may no longer be recognized as
AVCHD data, or the memory card may not longer
be able to be used with AVCHD devices.
AVCHD
AVCHDTN
BDMV
CLIPINF
PLAYLIST
STREAM
To prevent the loss of any part of the information
when transferring data on the SD Memory Card
to a computer or when copying data stored on a
computer back onto the SD Memory Card, be sure to use the dedicated AVCCAM Viewer.
The AVCCAM Viewer can also be downloaded from the following website.
(Compatible OS: Windows XP/Windows Vista/Windows 7 or Mac OS 10.4 or later/Mac OS 10.5/Mac OS
10.6)
■Concerning the handling of the camera’s metadata
A special manufacturer area in the control file area under the AVCHD standard is employed for the
metadata which is supported by this camera.
If files are deleted or copied, if clip protection is added or removed or if other such editing operations
have been performed using editing software or a camera recorder which does not support this camera’s
metadata, the special area for the metadata will be erased, and the shot marks and indexes added by
the camera as well as the PH mode information and other information will be lost. Therefore, before
proceeding with these kinds of editing operations, check whether the camera’s metadata is supported.
73
2010
P
|