QUICK START GUIDE
HDD Music
Player
m:robe
MR-100
Thank you for purchasing this OLYMPUS HDD Music Player-m:robe MR-100. This
Quick Start Guide contains instructions for setup prior to use of this product.
You can start using this product immediately after reading this guide. For more details
on operations and settings, refer to the supplied “USER’S MANUAL.”
User registration
To stay informed of important updates and news regarding your Olympus
product, be sure to register your purchase online.
Use the supplied CD-ROM to install the Music/Photo Organization
Software “m:trip“, on your PC. After installing, click [
registration screen to register your purchase.
]
the
OK on
Checking the contents
• m:robe
• Headphones
• Cradle
• Dedicated
USB cable
• AC adapter
• AC cord
• Remote
(not included
:RM13)
• Extension cable
• CD-ROM
• USER’S MANUAL
• QUICK START
GUIDE (this guide)
• Warranty card
Setting up your m:trip
Installing the supplied Music/Photo Organization
Software “m:trip“
Turn on your PC and insert the supplied CD-ROM into
the CD-ROM drive.
A
The screen below appears.
Click the [m:trip] button.
After the Install Wizard screen appears, follow the on-screen
instructions.
B
C
Click [Finish] when the InstallShield Wizard Complete
screen appears.
Installation of m:trip is complete.
If you are prompted to reboot your PC after installation, reboot your PC.
To run m:trip
Double-click the m:trip icon on the desktop to start
A
the software.
You will need to register your m:robe in the user registration
screen when using “m:trip“ for the first time.
For details on operations and instructions for “m:trip“, refer to the online
Help. To browse the online Help, click [Help] at the top of the m:trip
screen.
Importing music to m:trip
You can import music from audio CDs.
Insert an audio CD into your PC.
A
m:trip runs automatically and the screen below appears.
Click the [Import from audio CD] button on your PC
screen.
B
Importing of the audio CD starts.
Transferring music to your m:robe
Turning on your m:robe
Press POWER.
A
PO
WE
R
MENU
(See other side)
Connecting to your PC
Connect your m:robe to your PC.
Connect the dedicated USB cable to your PC.
Connect the dedicated USB cable to the cradle, or
connect the cable directly to your m:robe.
A
B
Place your m:robe in its cradle.
C
Cradle
(supplied)
To USB jack
C
B
PC
A
To USB jack
B
To PC connecting jack
Starting transfer
After you connect your m:robe to your PC, m:trip automatically runs.
Click [Start] in the screen, which is displayed by clicking [Sync.] in the
bottom right of your PC’s screen, to start transferring.
During transfer, the CONNECT display
appears on your m:robe.
CONNECT
When the transfer is complete, the transfer
indicator stops on the screen.
DO NOT DISCONNECT!
Click the [Remove m:robe] button on the
m:trip screen, and then remove the dedicated
USB cable from the cradle or your m:robe.
Listening music from your m:robe
Checking the battery
MAIN MENU
You can check the battery indicator on the display.
Indicator is in the lower left corner of the display.
MUSIC LIST
BROWSE
The battery indicator
MUSIC SETTINGS
DEVICE SETTINGS
: Battery is fully charged
/
: Low battery
01:15
02:30
: Charge the battery
Using the Touch Pad
This m:robe has a touch pad system. Check the keys on the m:robe.
MENU
play/pause
right
Scroll Key
Connecting the headphones
Connect the supplied headphones to the extension
cable.
Connect the extension cable to your m:robe.
A
B
R
E
W
O
P
To the extension
cable
B
A
MENU
To the remote/headphones jack
Play music
MAIN MENU
Press and hold
MENU display appears.
until MAIN
A
B
C
D
MUSIC LIST
BROWSE
MUSIC SETTINGS
DEVICE SETTINGS
01:15
02:30
MAIN MENU
In the MAIN MENU, select
MUSIC LIST
BROWSE
“BROWSE” using the Scroll Key,
MUSIC SETTINGS
DEVICE SETTINGS
then press
.
00:00
02:30
BROWSE
Select “ALL”, and then press
If a list of music is displayed, the music
was successfully transferred.
.
ALL
ARTISTS
ALBUMS
GENRES
COMPOSERS
00:00
02:30
ALL
Using the Scroll Key to select
the music, and then press
ALL track 1
ALL track 2
ALL track 3
ALL track 4
ALL track 5
.
00:00
02:30
1/12
PLAYBACK
Music playback starts, and the
PLAYBACK display appears.
Track Title1
Artist Name
00:08
02:32
02:30
Useful settings
Specify the DATE&TIME and LANGUAGE
In the MAIN MENU, select “DEVICE SETTINGS” and
A
press
.
DEVICE SETTINGS
DATE&TIME
Select “DATE&TIME” or
B
“LANGUAGE” using the Scroll
LANGUAGE
BEEP
Key, and then press
.
LCD CONTRAST
BACKLIGHT
00:00
02:30
Select the item and value that you want to change
C
using the Scroll Key, then press
.
The value is set, and the display returns to the DEVICE
SETTINGS.
When you need to change other settings, repeat step
and
B
.
C
For further details on operations and functions, refer to the supplied USER‘S
MANUAL.
Trademarks
• m:robe and m:trip are trademarks of OLYMPUS CORPORATION.
• Windows is a registered trademark of Microsoft Corporation.
• All other company and product names are registered trademarks and/or
trademarks of their respective owners.
• The screen fonts used by this product belong to Ricoh corporation.
Printed in CHINA
U1-NG0626-01
YC0410
|