Nokia Bluetooth Speakers MD-5W
2
3 4 5
6
7
8
8
10 11
9
12
14
13
Issue1
Introduction
Congratulations on your purchase.
With Nokia Bluetooth Speakers
MD-5W you can listen to music
from your compatible phone or
music device and enjoy the high-
quality audio. You can also use the
speakers as a speakerphone thanks
to the integrated microphone.
Bluetooth wireless
technology
Bluetooth wireless technology
allows you to connect compatible
devices without cables. A Bluetooth
connection does not require that
the speakers and the other device
be in line of sight, but both devices
should be within 10 meters (30
feet) of each other. Connections
may be subject to interference from
obstructions, such as walls, or other
electronic devices.
You can connect the speakers to a
compatible device using Bluetooth
wireless technology or the supplied
cable.
Read this user guide carefully
before using the speakers. Also read
the user guide for your phone,
which provides important safety
and maintenance information, or
the user guide for the compatible
music device. Keep all accessories
and enhancements out of the reach
of small children.
The speakers comply with the
Bluetooth Specification 1.2 that
supports Advanced Audio
Distribution Profile (A2DP) 1.0,
Headset Profile 1.1, Hands-Free
Profile 1.0, and Audio/Video
Remote Control Profile (AVRCP) 1.0.
Check with the manufacturers of
other devices to determine their
compatibility with this device.
3
There may be restrictions on using locations. Check with your local
Bluetooth technology in some
authorities or service provider.
Getting started
Parts
Chargers
Check the model number of any
charger before use with this device.
The speakers are intended for use with
the supplied AC-4 charger.
The speakers contain the parts
shown on the title page: indicator
light (1), rewind key (2), power key
(3), play/pause key (4), answer/end
key (5), fast forward key (6),
microphone (7), speakers (8),
volume down key (9), stereo
widening key (10), volume up key
(11), power connector (12), battery
compartment (13), and audio input
(14).
Parts of the speakers are magnetic.
Metallic materials may be attracted to
the speakers. Do not place credit cards
or other magnetic storage media near
the speakers, because information
stored on them may be erased.
Warning: Use only
chargers approved by
Nokia for use with this
particular device. The use of any other
types may invalidate any approval or
warranty and may be dangerous.
When you disconnect the power cord
of any enhancement, grasp and pull
the plug, not the cord.
Connect to power
The speakers can be powered by
four AA batteries or the supplied
charger.
4
Install AA batteries
If rechargeable batteries are placed
in the battery compartment, they
are not charged by the charger.
When you use batteries, alkaline
batteries are recommended. To
install the batteries, ensure that the
speakers are off, and open the cover
of the battery compartment by
pushing the lower part of the cover
and pulling the cover up.
Switch the speakers on or off
To switch on, press and hold the
power key until the blue indicator
light is displayed.
To switch off, press and hold the
power key until the red indicator
light is displayed.
Place the batteries as indicated in
the compartment, and push the
cover until it snaps into place.
Connect the speakers
During long periods where the
speakers are not used, remove the
batteries to prevent damage from
battery leakage.
You can connect the speakers to a
compatible device (such as a
mobile phone or music player)
using Bluetooth wireless
When battery power falls low, the
red indicator light starts to flash
and the speakers beep once a
minute.
technology or the supplied cable.
Pair and connect using Bluetooth
wireless technology
The following instructions apply for
a mobile phone but the procedure is
the same for a music player, except
that you may not need to give the
Bluetooth passcode.
Connect to wall outlet
To use the speakers with the
charger, connect the charger to a
wall outlet, and plug the charger
cable to the power connector.
5
1. Ensure that the speakers are off If the pairing is successful, the blue
and that the phone is on.
indicator light flashes five times,
and the speakers appear in the
phone menu where you can view
the paired Bluetooth devices.
2. Press and hold the power key
until the blue and red indicator
lights start to alternate.
3. Activate the Bluetooth feature
on the phone, and set it to
search for Bluetooth devices.
Connect using a cable
You can connect the speakers to a
compatible device with the
supplied CA-63U cable.
4. Select the speakers from the list
of found devices.
To connect the speakers to a device
that has a 3.5-mm audio connector,
plug the cable into the audio input
on the speakers and the audio
connector on the device.
5. Enter the Bluetooth passcode
0000 to pair and connect the
speakers to the phone. In some
phones you may need to make
the connection separately after
pairing.
Basic use
battery power, change the
batteries.
Adjust the volume
To set the volume of the speakers,
press either volume key. If the
sound level of the speakers
Listen to music
To listen to music, connect the
speakers to a compatible music
becomes too low when using
6
player such as a mobile phone with To select the next track, press the
a music player feature or other
music player device.
fast forward key. To select the
previous track, press the rewind
key.
To use the music functions, connect
the compatible device to the
To pause or resume playing, press
speakers using Bluetooth wireless the play/pause key. To stop playing,
technology. The compatible music
player should support the A2DP
Bluetooth profile. If you use a cable
connection, you can only adjust the
volume of the speakers; to control
music, use the keys on your music
player.
press and hold the play/pause key.
To widen the stereo image of the
sound, check that this feature is off
in your music player, and press the
stereo widening key.
Call handling
The speakers can be used for call
handling if connected to a
compatible phone using Bluetooth
wireless technology.
If you answer or make a call while
listening to music, playing is
paused until the call ends.
Warning: Listen to music
at a moderate level.
Continuous exposure to
high volume may damage your
hearing.
To make a call, use your phone in
the normal way when the speakers
are connected to your phone. Speak
toward the microphone on the
speakers.
To play music, select a track on your
music player, and press the play/
pause key.
If your phone supports last number
redialing with the speakers, press
the answer/end key twice when no
call is in progress.
7
If your phone supports voice dialing
with the speakers, press the
answer/end key when no call in
progress, and proceed as described
in the user guide of your phone.
Clear settings or reset
To clear the settings, switch off the
speakers. Press and hold the volume
down and power keys until the
purple indicator light is displayed.
Press and hold the volume down
key until the blue indicator light is
displayed.
To answer or end a call, press the
answer/end key. If you do not want
to answer the call, press and hold
either volume key.
To reset the speakers if they do not
work, remove the batteries and
unplug the speakers from the
charger.
To switch an ongoing call from the
speakers to a compatible phone,
press and hold either volume key. To
switch the call back to the
speakers, press the power key.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should
be treated with care. The following
suggestions will help you protect your
warranty coverage.
your device does get wet, allow it
to dry completely.
•
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
•
Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If
Do not store the device in hot
areas. High temperatures can
shorten the life of electronic
8
devices, damage batteries, and
warp or melt certain plastics.
•
•
Do not store the device in cold
areas. When the device returns to
its normal temperature, moisture
can form inside the device and
damage electronic circuit boards.
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
•
•
Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
If the product is not working properly,
take it to the nearest authorized
service facility for service.
9
|