En
The
Guide to Digital Photography
with the
DIGITAL CAMERA
5.6-16.8mm1:2.7-4.8
Shoot, View, and Enjoy
A Flowchart Guide to Using Your Camera
STEP 1—Ready the camera
Getting ready
First Steps
16
First Steps
Camera Setup
16
59
Camera setup
STEP 2—Take pictures
Snapshots (auto mode)
Tutorial: Taking Pictures
Getting Creative
23
36
41
Creative photography
(scene mode)
Custom shots and movies
Taking Pictures: The Details
STEP 3—Play them back…
…while shooting…
Review and Deletion
Basic Playback
31
68
…after shooting…
…and delete unwanted pictures…
…immediately
Keep or Delete
48
31
68
76
…while shooting
…during playback
Delete multiple pictures
Review and Deletion
Basic Playback
Deleting Pictures
STEP 4—Install camera software
Install software
Quick Start Guide (provided)
—
Nikon View Reference Man-
ual (provided on CD)
Get to know Nikon View
—
STEP 5—Copy pictures to your computer
Transfer pictures Quick Start Guide (provided)
—
Product Documentation
The documentation for this product
includes the manuals listed below.
Please be sure to read all instructions
thoroughly to get the most from your
camera.
Overview
Getting to Know the COOLPIX 3500
Menu Guide
Quick-Start Guide
First Steps
The Quick-Start Guide takes you
through the process of unpacking
and setting up your Nikon digital
camera, taking your first pictures, in-
stalling software, and transferring
pictures to your computer.
Taking Pictures
Review and Deletion
Getting Creative
Beyond Point-and-Shoot
Fine-Tuning Camera Settings
Camera Setup
Guide to Digital Photography
The Guide to Digital Photography
(this manual) provides complete op-
erating instructions for your camera.
Nikon View Reference Manual
The Nikon View Reference Manual
can be found in electronic format
on the reference CD provided with
your camera. For information on
viewing the Reference Manual, see
Basic Playback
The Playback Menu
Technical Notes
the Quick-Start Guide
.
Index
i
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this equip-
ment. Keep these safety instructions where all those who use the product
will read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before
using your Nikon product to prevent possible injury.
Do not disassemble
Touching the product’s internal parts
could result in injury. In the event of
WARNINGS
Turn off immediately in the event
of malfunction
a malfunction, the product should be
Should you notice smoke or an un-
repaired only by a qualified technician.
usual smell coming from the equip-
Should the product break open as the
ment or from the AC adapter (avail-
result of a fall or other accident, re-
able separately), unplug the AC
move the battery or AC adapter and
adapter or remove the battery imme-
then take the product to a Nikon-au-
diately, taking care to avoid burns.
thorized service center for inspection.
Continued operation could result in
Observe proper precautions when
handling batteries
injury. After removing the battery,
take the equipment to a Nikon-autho-
rized service center for inspection.
Batteries may leak or explode if im-
properly handled. Observe the follow-
ing precautions when handling bat-
teries for use in this product:
• Be sure the product is off before re-
placing the battery. If you are using
an AC adapter, be sure it is un-
plugged.
• Use only a rechargeable Nikon EN-EL2
lithium-ion battery (supplied).
• When inserting the battery, do not at-
tempt to insert it upside down or
backwards.
Do not use in the presence of flam-
mable gas
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
Observe caution when using the
camera strap
Caution should be exercised to pre-
vent strangulation when wearing the
camera strap around your neck. Never
place the strap around the neck of an
infant or child.
• Do not short or disassemble the bat-
tery.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to water.
• Do not transport or store with metal
objects such as necklaces or hairpins.
ii
• Batteries are prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• When the battery is not in use, attach
the terminal cover and store in a cool
place.
• Immediately after use, or when the
product is used on battery power for
an extended period, the battery may
become hot. Before removing the
battery, turn the camera off and al-
low the battery to cool.
Removing memory cards
Memory cards may become hot dur-
ing use. Observe due caution when
removing memory cards from the
camera.
CD-ROMs
The CD-ROMs on which the software
and manuals are distributed should
not be played back on audio CD
equipment. Playing CD-ROMs on an
audio CD player could cause hearing
loss or damage the equipment.
Observe caution when operating
the flash
• Discontinue use immediately should
you notice any changes in the battery,
such as discoloration or deformation.
Using the flash close to your subject’s
eyes could cause temporary visual im-
pairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
one meter (39˝) from the subject.
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the pur-
pose, to maintain compliance with
product regulations.
Avoid contact with liquid crystal
Should the monitor break, care should
be taken to avoid injury due to bro-
ken glass and to prevent liquid crystal
from the monitor touching the skin
or entering the eyes or mouth.
The lens section
• Do not insert your fingers in the gap
between the rotating lens section and
the camera body. Your fingers could
be pinched between the body and the
lens section, resulting in injury. Par-
ticular care should be observed in the
case of small children.
• To prevent your fingers, flesh, or other
objects from being pinched in the gap
between the rotating lens section and
the camera body, return the lens sec-
tion to its housing in the camera body
before transporting the camera.
Keep out of reach of children
Particular care should be taken to pre-
vent infants from putting the battery
or other small parts into their mouths.
iii
Notices
• No part of the manuals included with this • Nikon will not be held liable for any dam-
product may be reproduced, transmitted,
transcribed, stored in a retrieval system,
ages resulting from the use of this prod-
uct.
or translated into any language in any • While every effort has been made to
form, by any means, without Nikon’s
prior written permission.
• Nikon reserves the right to change the
specifications of the hardware and soft-
ware described in these manuals at any
time and without prior notice.
ensure that the information in these
manuals is accurate and complete, we
would appreciate it were you to bring
any errors or omissions to the attention
of the Nikon representative in your area
(address provided separately).
Notice for customers in the U.S.A.
FederalCommunicationsCommission(FCC)RadioFrequencyInterferenceStatement
This equipment has been tested and found
to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC
E3500
Tested To Comply
With FCC Standards
rules. These limits are designed to pro-
vide reasonable protection against harm-
ful interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equip-
ment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
FOR HOME OR OFFICE USE
CAUTIONS
Modifications
The FCC requires the user to be notified
that any changes or modifications made
to this device that are not expressly ap-
proved by Nikon Corporation may void the
user’s authority to operate the equipment.
Interface Cables
Use the interface cables sold or provided
by Nikon for your equipment. Using other
interface cables may exceed the limits of
Class B Part 15 of the FCC rules.
Nikon Inc.,
• Reorient or relocate the receiving an-
tenna.
• Increase the separation between the
equipment and receiver.
1300WaltWhitmanRoad,Melville,NewYork
11747-3064, U.S.A.
Tel.: 631-547-4200
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced ra-
dio/television technician for help.
iv
Notice for customers in Canada
CAUTION
ATTENTION
This class B digital apparatus meets all re- Cet appareil numérique de la classe B res-
quirements of the Canadian Interference pecte toutes les exigences du Règlement
Causing Equipment Regulations.
sur le matériel brouilleur du Canada.
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally copied or repro-
duced by means of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being • Cautions on certain copies and repro-
copied or reproduced
ductions
Do not copy or reproduce paper money,
coins, securities, government bonds, or
local government bonds, even if such
copies or reproductions are stamped
“Sample.”
The government has issued cautions on
copies or reproductions of securities is-
sued by private companies (shares, bills,
checks, gift certificates, etc.), commuter
passes, or coupon tickets, except when
a minimum of necessary copies are to
be provided for business use by a com-
pany. Also, do not copy or reproduce
passports issued by the government, li-
censes issued by public agencies and pri-
vate groups, ID cards, and tickets, such
as passes and meal coupons.
The copying or reproduction of paper
money, coins, or securities which are cir-
culated in a foreign country is prohib-
ited.
Unless the prior permission of the gov-
ernment has been obtained, the copy-
ing or reproduction of unused postage
stamps or post cards issued by the gov-
ernment is prohibited.
• Comply with copyright notices
The copying or reproduction of copy-
righted creative works such as books,
music, paintings, woodcut prints, maps,
drawings, movies, and photographs is
prohibited except when it is done for per-
sonal use at home or for similar restricted
and non-commercial use.
The copying or reproduction of stamps
issued by the government and of certi-
fied documents stipulated by law is pro-
hibited.
Trademark Information
Apple, the Apple logo, Macintosh, Mac OS, Power Macintosh, PowerBook, and QuickTime are registered trademarks
of Apple Computer, Inc. Finder, Power Mac, iMac, and iBook are trademarks of Apple Computer, Inc. IBM is a
registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trade-
marks of Microsoft Corporation. Internet is a trademark of Digital Equipment Corporation. CompactFlash is a
trademark of SanDisk Corporation. Lexar Media is a trademark of Lexar Media Corporation. Adobe and Acrobat are
registered trademarks of Adobe Systems Inc. Zip is a registered trademark of Iomega Corporation in the U.S. and
other countries. All other trade names mentioned in this manual or the other documentation provided with your
Nikon product are trademarks or registered trademarks of their respective holders.
v
Table of Contents
Product Documentation ..................................................................................
For Your Safety ...............................................................................................
Notices ...........................................................................................................
i
ii
iv
Introduction: Before You Begin ......................................................................
Overview: About This Manual .......................................................................
Getting to Know the COOLPIX 3500: The Parts of the Camera and Their
Functions .........................................................................................................
Where to Find It—Parts of the COOLPIX 3500 ................................................
How to Use It—Camera Controls and Displays ................................................
Menu Guide: Index to Menu Options ...........................................................
1
2
4
4
6
9
Tutorial: Getting Started ................................................................................. 15
First Steps: Getting Ready to Use Your Camera ............................................ 16
Step 1—Attach the Camera Strap ................................................................... 16
Step 2—Insert the Battery and Memory Card .................................................. 16
Step 3—Choose a Language .......................................................................... 19
Step 4—Set the Time and Date....................................................................... 21
Taking Pictures: The Basics ............................................................................. 23
Step 1—Ready the Camera ............................................................................. 23
Step 2—Choose
Mode .......................................................................... 25
Step 3—Adjust Camera Settings (Optional)..................................................... 26
Step 4—Frame the Picture .............................................................................. 26
Step 5—Focus and Shoot ............................................................................... 28
Step 6—Put the Camera Away ....................................................................... 30
Review and Deletion: Quick Review ............................................................. 31
Quick Review.................................................................................................. 32
Full-Screen Review .......................................................................................... 32
Thumbnail Review .......................................................................................... 34
Getting Creative: Scene Selection ................................................................. 36
vi
Taking Pictures: The Details ............................................................................ 41
Beyond Point-and-Shoot: Camera Controls .................................................. 42
,
, or Movie: Choosing a Shooting Mode ......................................... 42
Flash Photography: The Button .................................................................. 43
Delaying Shutter Release: Choosing a Self-Timer Mode................................... 45
Framing Pictures: Optical and Digital Zoom ..................................................... 47
Keep or Delete: Picture Review ....................................................................... 48
Fine-Tuning Camera Settings: The
-Mode Menu..................................... 49
Making Effective Use of Memory: Image Quality and Size ............................... 50
Adjusting Exposure: Exp. +/–........................................................................... 53
Keeping Colors True: White Balance ............................................................... 54
Taking Pictures in a Sequence: Continuous ...................................................... 56
Getting Sharper Pictures: BSS (Best Shot Selector) ........................................... 57
Making Edges More Distinct: Image Sharpening ............................................. 58
Camera Setup: The SET-UP Menu ................................................................... 59
Adjusting Monitor Brightness: Brightness........................................................ 62
Formatting Memory Cards: CF Card Format .................................................... 62
Setting the Time and Date: Date ..................................................................... 63
Conserving Battery Power: Auto Off ............................................................... 63
Choosing a Language: Language .................................................................... 64
Choosing a USB Protocol: USB ........................................................................ 64
Restoring Default Settings: Reset All (
Mode Only) .................................. 66
Playing Pictures Back: Playback Mode ........................................................... 67
Basic Playback: Full-Frame and Thumbnail Playback ................................... 68
The Playback Menu: Managing Pictures ....................................................... 75
Deleting Pictures: Delete ................................................................................. 76
Ordering Prints: Print Set................................................................................. 78
Safeguarding Valuable Pictures: Protect .......................................................... 80
Marking All Pictures for Transfer: Auto Transfer............................................... 81
Technical Notes: Camera Care, Options, and Resources ............................... 83
Caring for the Camera and Battery ................................................................. 84
Optional Accessories....................................................................................... 87
Web Resources ............................................................................................... 88
Troubleshooting.............................................................................................. 88
Specifications ................................................................................................. 95
Index................................................................................................................. 98
vii
viii
Overview
Introduction
2–3
Before You Begin
Getting to Know the
COOLPIX 3500
4–8
Menu Guide
This chapter is divided into the following sections:
Overview
9–14
Read this section for a description of how this
manual is organized and for an explanation of the
symbols and conventions used.
Getting to Know the COOLPIX 3500
Bookmark this section and refer to it as you read
through the manual for information on the names
and functions of camera parts.
Menu Guide
Refer to this section for instructions on using the
menus that control some aspects of camera opera-
tion. This section also contains an index of menu
options.
1
Overview
About This Manual
Thank you for your purchase of a COOLPIX 3500 digital camera. This manual
has been written to help you enjoy taking digital pictures with your COOLPIX
3500. Read this manual thoroughly before use, and keep it handy when
using the product.
Use Only Nikon Brand Electronic Accessories
Your Nikon COOLPIX digital camera is designed to the highest standards and
includes complex electronic circuitry. Only Nikon brand electronic accessories
(including battery chargers, batteries, and AC adapters) certified by Nikon
specifically for use with your Nikon digital camera are engineered and proven
to operate within the operational and safety requirements of this electronic
circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID
YOUR NIKON WARRANTY.
For more information about Nikon brand accessories, contact your local au-
thorized Nikon dealer.
2
To make it easier to find the information you need, the following symbols and
conventions are used:
This icon marks cautions, infor-
This icon marks tips, additional
mation that you should read be-
information you may find help-
fore use to prevent damage to
ful when using your camera.
your camera.
This icon marks notes, informa-
tion that you should read before
using your camera.
This icon indicates that more in-
formation is available elsewhere
in this manual.
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product sup-
port and education, continually-updated information is available on-line at
the following sites:
•For users in the U.S.A.: http://www.nikonusa.com/
•For users in Europe: http://www.nikon-euro.com/
•For users in Asia, Oceania, the Middle East, and Africa:
http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips,
answers to frequently-asked questions (FAQs), and general advice on digital
imaging and photography. Additional information may be available from the
Nikon representative in your area. See the URL below for contact information:
http://www.nikon-image.com/eng/
3
Getting to Know the COOLPIX 3500
The Parts of the Camera and Their Functions
Take a few moments to familiarize yourself with camera controls and displays.
You may find it helpful to bookmark this section and refer to it as you read
through the rest of the manual.
Where to Find It—Parts of the COOLPIX 3500
The parts of the camera are identified below. For more information on the
function of each part, refer to the page numbers listed.
1
A
5
4
3
2
1 Shutter-release button ..... 28, 29
2 Eyelet for camera strap .......... 16
3 Built-in Speedlight ................. 43
4 Lens .......................... 23, 26, 95
5 Self-timer lamp...................... 45
8 Battery-chamber/memory card
slot cover .............................. 17
9 Cover release (for use when
connecting optional AC adapter
kit) .................................. 16, 87
10 USB connector
(under cover) ......................... 82
6 Zoom buttons ( / )
........................... 27, 47, 70, 71
11
12
/SMALL PIC. button... 31, 72
button ............... 49, 60, 75
7 Cover latch............................ 17
4
B
6
C
7
8
9
16
15 14 13
D
12 11 10
13 Tripod socket
A Mode selector ......................... 6
B Monitor................................... 6
C Multi selector .......................... 8
14
/
button.... 33–34, 43, 68, 70
15 Flash-ready lamp ................... 28
16 Non-slip grip
D
/
button ...................... 8
5
How to Use It—Camera Controls and Displays
A The Mode Selector
mode
The mode selector selects the operating mode and
turns the camera on and off. Choose
still pictures and movies ( 42),
to take
(playback
mode) to play them back ( 68). Slide the mode
selector to OFF when you have finished using the
camera.
Playback mode
B The Monitor
The monitor is where you compose pictures before shooting. In
mode,
the monitor shows the view through the camera lens, together with icons
indicating the status of camera settings.
1
2 3 4 5
6 Battery level indicator4 .......... 24
17
7 Self-timer indicator ................ 45
6
7
8 Number of exposures remaining
16
15
14
13
............................................. 24
9 Exposure compensation......... 53
10 Flash mode............................ 43
11 Image quality ........................ 51
12 Image size ............................. 52
13 Sensitivity gain indicator ........ 44
15
2048 NORMAL
12 11 10
9
8
1 Zoom indicator ...................... 47
Focus indicator1 ..................... 28
2
14 Best shot selector (BSS).......... 57
Continuous shooting mode ... 56
3 Recording indicator ............... 29
4 “Date not set” icon2 ............. 22
5 Camera shake icon3 .............. 44
15 Image sharpening.................. 58
16 White balance ....................... 54
17 Shooting mode ............... 25, 36
1 Displayed only when shutter-release button is
pressed halfway.
3 Appears only at slow shutter speeds.
4 Appears only when battery is running low.
2 Appears when clock-calendar has not been set.
6
The monitor is also used to play pictures back. When a picture is played back
full screen, information about the image is shown superimposed on the photo.
11
10
1
2
3
1 Current folder ....................... 69
2 File number and type............. 69
3 Battery level indicator* ........... 24
4 Transfer icon.............. 33, 34, 69
5 Print-order icon ..................... 78
6 Protect icon ........................... 80
4
5
6
0012/0015
2048 NORMAL
9
8
7
7 Current frame number/
total number of frames ... 32, 68
8 Image quality ........................ 51
9 Image size ............................. 52
10 Time of recording .................. 22
11 Date of recording .................. 22
* Appears only when battery is running low.
Controlling the Monitor
To hide camera settings or photo info, press the multi selector to the left.
Press the multi selector to the left a second time to view indicators again.
Indicators
displayed
Indicators
hidden
2048
NORMAL
15
7
C The Multi Selector
The multi selector is used to navigate through cam-
era menus, to page through or select pictures
during playback ( 68), and to control the dis-
play of indicators in the monitor. In
mode, the
multi selector is also used to select the shooting
mode and to turn the self-timer on and off.
Self-timer on/off ( 45)
Press up to display self-timer menu, press up or down
to highlight option. Press right to exit menu.
ON
OFF
Shooting mode se-
lection ( 42)
Press down to display
s h o o t i n g - m o d e
menu, press up or
down to highlight op-
tion. Press right to
exit menu.
Indicators on/off ( 7)
Press to left to hide or
display indicators in
monitor.
D The
(Scene Mode)/
(Transfer) Button
In
mode, the
/
(scene mode/transfer)
button is used for scene selection ( 36). When
pictures are played back in the monitor, it is used
to select images for transfer to a computer (
82). When the camera is connected to a com-
puter running Nikon View, pressing this button transfers selected pictures to a
computer (not available under Mac OS X version 10.1.2; with Mac OS X ver-
sion 10.1.3 or later, the USB option in the camera setup menu [ 64] must
be set to PTP). See the Quick Start Guide for details.
8
Menu Guide
Index to Menu Options
Changes to some camera settings are made with the help of menus that
appear in the camera monitor. The options available depend on the operat-
ing mode and, in
mode, on the shooting mode selected ( 42).
Mode Menu
Description
In
(auto) and scene modes, the SHOOT-
10,
49–
53
ING menu is used to set image quality and size,
and to adjust exposure for very bright, very dark,
or high-contrast subjects.
(manual) mode gives you full control over
SHOOTING
camera settings. In addition to the settings avail- 11,
able in auto and scene modes, the manual- 49–
mode SHOOTING menu contains four advanced 58
shooting options.
The SET-UP menu, which is accessed from the
12,
SHOOTING menu, contains options for basic
59–
SET-UP camera setup (e.g., setting the time and date,
choosing a language).
66
The PLAY BACK menu contains options for 13,
managing the pictures stored on the memory 61–
card by, for example, deleting selected images 62,
or selecting pictures for printing or for transfer 75–
PLAY
BACK
to your computer.
82
No menu is available in movie mode ( 42, 90).
9
SHOOTING MENU
The Shooting Menu
Pressing the MENU button when the mode selector is
set to displays the SHOOTING menu. In (auto)
/ Scene
and scene modes, this menu contains three basic shoot-
ing options.
MENU OFF
SELECT
SET
IMAGE QUALITY
IMAGE QUALITY
FINE
NORMAL
BASIC
Choose FINE for printing and enlarg-
ing, BASIC to reduce file size.
MENU OFF
SELECT
SET
51
IMAGE SIZE
IMAGE SIZE
2048
Choose small sizes for e-mail
1600
1024
640
or the web, large sizes for
1280
SET
printing.
52
MENU OFF
SELECT
+ –
/
EXP.
EXP. +/–
Choose from settings
between –2.0 and
+2.0 EV
Adjust exposure for bright, dark, or
high contrast subjects.
MENU OFF
SELECT
SET
53
10
SHOOTING MENU
The Shooting Menu
In
(manual) mode, the SHOOTING menu contains
four advanced shooting options in addition to the three
basic options available in auto and scene modes.
MENU OFF
SELECT
SET
IMAGE QUALITY
FINE
NORMAL
BASIC
IMAGE QUALITY
Choose FINE for printing and enlarg-
ing, BASIC to reduce file size.
FINE
NORMAL
BASIC
MENU OFF
SELECT
SET
SET
SET
SET
SET
51
IMAGE SIZE
IMAGE SIZE
2048
Choose small sizes for e-mail
1600
1024
640
or the web, large sizes for
1280
printing.
52
MENU OFF
SELECT
WHITE BALANCE
A Auto
WHITE BALANCE
Match to lighting to ensure
that colors are reproduced
Fluorescent
Cloudy
Speedlight
White Bal Preset
Fine
accurately.
MENU OFF
SELECT
Incandescent
54
+ –
/
EXP.
EXP. +/–
Choose from settings
between –2.0 and
+2.0 EV
Adjust exposure for bright, dark, or
high contrast subjects.
MENU OFF
SELECT
53
CONTINUOUS
CONTINUOUS
Take pictures in sequence or create
collages of sixteen consecutive pho-
Single
Continuous
Multi-Shot 16
Single
Continuous
Multi-Shot 16
SELECT
tographs.
MENU OFF
56
BEST SHOT SELECTOR
BEST SHOT SELECTOR
Use when photos could be blurred by On
inadvertent camera movement.
Off
On
Off
MENU OFF
SELECT
SET
57
IMAGE SHARPENING
IMAGE SHARPENING
Auto
High
Normal
Heighten or reduce the
sharpness of outlines in your
Low
Off
A
u
to
High
No
Lo
f f
r
m
al
w
O
photographs.
MENU OFF
SELECT
SET
58
11
SET-UP
The Setup Menu
/
/ Scene
Brightness
CF Card Format
Date
Auto Off
Language
USB
The SET-UP menu, which can be accessed from the
SHOOTING menu, contains options for camera setup.
Reset All
SELECT
SET
MENU OFF
BRIGHTNESS
Brightness
Adjust monitor brightness.
Maximum
(Five levels)
Minimum
MENU OFF
SELECT
SET
SET
SET
SET
SET
SET
SET
62
CF CARD FORMAT
CF Card Format
Format memory cards for use in your No
camera.
WARNING !
All images will
be deleted !
No
Format
Format
MENU OFF
SELECT
DATE
62
Date
Year, Month, Day, hour,
minute, order of dis-
play for year, month,
and day
Set the time and date.
MENU OFF
SELECT
21–22
AUTO OFF
Brightness
30 s
Auto Off
CF Card Format
Date
Auto Off
Language
USB
Specify how long the monitor will re- 1 m
main on before turning off automat-
ically to save power.
5 m
30 m
Reset All
MENU OFF
SELECT
63
LANGUAGE
Brightness
Language
Choose the language in which cam-
era messages and menus are dis-
De (German)
En (English)
Fr (French)
CF Card Format
Date
Auto Off
Language
USB
(Japanese)
Es (Spanish)
Reset All
MENU OFF
played.
SELECT
19–20
USB
USB
Brightness
CF Card Format
Date
Choose a transfer protocol for use PTP
when your camera is connected to a
computer.
Auto Off
Language
USB
PTP
Mass Storage
Mass Storage
Reset All
MENU OFF
SELECT
64
RESET ALL
Reset All (
Reset camera settings to their default No
values.
mode only)
Reset all settings
to default values
No
Reset
Reset
MENU OFF
SELECT
66
12
DELETE
The Playback Menu
Delete
Print Set
Protect
Auto Transfer
CF Card Format
Brightness
Pressing the MENU button when the mode selector is
set to
displays the PLAY BACK menu, which con-
tains options for managing the pictures on the memory
card.
SELECT
SET
MENU OFF
DELETE
Delete
Delete all or selected pictures.
Selected Images
All Images
Selected Images
All Images
MENU OFF
SELECT
SET
76–77
PRINT SET
Print Set
Select pictures for printing on a DPOF-
compatible device.
Print set
Delete print set
Print set
Delete print set
MENU OFF
SELECT
SET
78–79
PROTECT
Protect
Select pictures for pro-
tection. Protected pic-
tures are marked by a
icon.
Protect selected pictures from acci-
dental deletion.
SELECT
SET
QUICK DONE
80
AUTO TRANSFER
Auto Transfer
Mark all pictures for transfer to a com- All ON
All ON
All OFF
puter, or remove transfer marking
All OFF
from all pictures.
MENU OFF
SELECT
SET
SET
SET
81
CF CARD FORMAT
CF Card Format
This option is used to format memory No
cards for use in your camera.
WARNING !
All images will
be deleted !
No
Format
Format
MENU OFF
SELECT
62
BRIGHTNESS
Brightness
Adjust monitor brightness.
Maximum
(Five levels)
Minimum
MENU OFF
SELECT
62
13
The Scene Menu (
and
Modes)
Your Nikon digital camera offers a choice of twelve “scene” modes for com-
mon compositions. When a scene is selected from the SCENE menu, camera
settings are automatically adjusted to produce optimal results for the selected
scene, sparing you the necessity of adjusting camera settings one-by-one.
Mode
Description
Use for portraits.
37
37
38
38
38
39
39
39
39
40
40
40
Portrait
Use to capture background details or the effects
Party/Indoor of candlelight and other indoor lighting.
Use when shooting portraits against a backdrop
Night Portrait of night scenery.
Use for bright subjects such as snowfields, beach-
Beach/Snow es, and sunlight expanses of water.
Use to enhance outlines, colors, and contrast in
skyscapes, forests, and other landscape shots.
Landscape
Sunset
Use to preserve the deep hues seen in sunsets and
sunrises.
Use when taking landscape shots a night.
Night Landscape
Museum
Use where a flash is prohibited.
Use to capture the expanding burst of light from
Fireworks Show a firework.
Use to capture vivid colors in close-up shots of
flowers, insects, and other small objects.
Close Up
Copy
Use to copy text and line drawings from a white
board or from a book or other printed matter.
Use when light is coming from behind your sub-
ject, throwing their features into shadow.
Back Light
14
First Steps
Tutorial
16–22
23–30
Getting Started
Taking Pictures
Review and Deletion
This chapter is divided into the following four sec-
tions:
31–35
First Steps
This section details the steps you will take before
using your camera for the first time.
Getting Creative
Taking Pictures
Read this section for a step-by-step guide to the
basics of taking pictures with the COOLPIX 3500.
36–40
Review and Deletion
Learn how to review and delete pictures while set-
ting up your next shot.
Getting Creative
Explore the creative possibilities of scene mode.
15
First Steps
Getting Ready to Use Your Camera
Before using your camera for the first time, you will need to complete the
steps shown below.
STEP 1 Attach the Camera Strap
STEP 2 Insert the Battery and Memory Card
STEP 3 Choose a Language
16
16–18
19–20
21–22
STEP 4 Set the Time and Date
Step 1—Attach the Camera Strap
To ensure that the camera is not dropped and damaged, attach the strap as
shown and wear it around your neck while using or carrying the camera.
Adjust to length shown if
wearing around neck
Step 2—Insert the Battery and Memory Card
Your camera is powered by a rechargeable Nikon EN-EL2 lithium-ion battery,
which can be charged using the MH-60 battery charger provided with the
camera. To store pictures, your camera uses CompactFlash™ memory cards.
.1 Charge the battery
2
The EN-EL2 lithium-ion battery supplied with your camera is not fully
charged at shipment. We recommend that you charge the battery be-
fore use. Instructions for charging the battery may be found in the
instruction manual included with the battery charger.
Alternative Power Sources
To power your camera continuously for extended playback or while the cam-
era is connected to a computer, we recommend the EH-60/EH-60S AC adapter
kit (available separately;
87).
16
.2 Turn the camera off
2
2
Before inserting or removing the battery or
memory card, be sure the mode selector is
in the “OFF” position.
.3 Open the battery-chamber/memory card slot cover
Slide the cover latch in the direction of the icon (A1) until the red dot
is visible (A2), indicating that the cover is unlatched. Slide the cover out
(B) and flip it open (C).
2
L
E
-
A
B
C
N
E
.4 Insert the battery and memory card
Insert a fully-charged EN-EL2 battery with
the “+” and “–” contacts oriented as shown
in the label on the underside of the battery-
chamber/memory card slot cover (A). Insert
the memory card as shown in the label at
the entrance to the memory card slot (B),
sliding it in until it is firmly in place and the
eject button pops up (the card is fully in-
serted when the top of the card is level with
the top of the eject button).
2
A
2
L
E
-
N
E
2
L
E
-
B
N
E
Read Battery Warnings
Read and follow all warnings and instructions supplied by the battery
manufacturer.
Formatting Memory Cards
The memory card supplied with your camera is formatted at shipment. Other
memory cards, however, must be formatted before first use. For information
on formatting memory cards, see “Camera Setup: CF Card Format” ( 62).
17
.5 Close the battery-chamber/memory card slot cover
2
Close the battery chamber/memory card slot cover (A, B) and slide the
latch in the direction of the
icon until the red dot is hidden, indicat-
ing that the cover is latched (C). To prevent the battery or memory card
being dislodged during operation, be sure that the cover is securely latched.
A
B
C
Removing the Battery
The battery can be removed without affecting pic-
tures on the memory card. Before removing the
battery, turn the camera off. Remove the battery
by hand, holding it between your finger and thumb
as shown at right. Do not use your fingernails.
2
L
E
-
N
E
The Clock Battery
The camera’s internal clock-calendar is powered by a separate, rechargeable
power source, which is charged as necessary when the main battery is in-
stalled. If the camera has been stored for an extended period with the main
battery removed, the clock may need to be reset. The clock power source can
provide several days of back-up power after charging for about ten hours.
Removing the Memory Card
Memory cards can be removed without loss of data
when the camera is off. When removing memory
1
2
cards, turn the camera off and open the battery
chamber/memory card slot cover (1). Press the
eject button to partially eject the card (2), and then
remove the card by hand.
18
Step 3—Choose a Language
Camera menus and messages can be displayed in your choice of German,
English, French, Japanese, and Spanish.
.1
.3
.5
.2
3
3
3
3
IMAGE QUALITY
SELECT
SET
MENU OFF
Slide mode selector to
Press MENU button to display menu
for current shooting mode
.4
3
SHOOTING MENU
SET-UP
Brightness
CF Card Format
Date
Auto Off
Language
USB
SELECT
SET
MENU OFF
SELECT
SET
MENU OFF
Highlight page tab
Highlight SET-UP menu page tab (
)
.6
3
BRIGHTNESS
Brightness
CF Card Format
Date
LANGUAGE
Brightness
CF Card Format
Date
Auto Off
Language
USB
Auto Off
Language
USB
MENU OFF
SELECT
SET
MENU OFF
SELECT
SET
Position cursor in SET-UP menu
Highlight Language
19
.7
.8
3
3
3
LANGUAGE
Brightness
CF Card Format
Date
Auto Off
Language
USB
LANGUAGE
Brightness
CF Card Format
Date
Auto Off
Language
USB
SELECT
SET
MENU OFF
SELECT
SET
MENU
OFF
Display options
Choose a language from:
De Deutsch (German)
En English
Fr Français (French)
Japanese
Es Español (Spanish)
.9
LANGUAGE
Brightness
CF Card Format
Date
Auto Off
Language
USB
MENU OFF
SELECT
SET
Return to SET-UP menu. If you have
yet to set the time and date, proceed
to Step 4.6 on the following page to
set the time and date.
20
Step 4—Set the Time and Date
Information on the time and date of recording is included with all pictures
taken with your Nikon digital camera. To set the camera’s internal clock to
the correct time and date:
.1
.3
.5
.2
4
4
4
4
IMAGE QUALITY
SELECT
SET
MENU OFF
Slide mode selector to
Press MENU button to display menu
for current shooting mode
.4
4
SHOOTING MENU
SET-UP
Brightness
CF Card Format
Date
Auto Off
Language
USB
SELECT
SET
MENU OFF
SELECT
SET
MENU OFF
Highlight page tab
Highlight SET-UP menu page tab (
)
.6
4
BRIGHTNESS
Brightness
CF Card Format
Date
DATE
Brightness
CF Card Format
Date
Auto Off
Auto Off
Language
USB
Language
USB
MENU OFF
SELECT
SET
MENU OFF
SELECT
SET
Position cursor in SET-UP menu
Highlight Date
21
.7
.8
4
4
4
DATE
DATE
SET
SELECT
SET
MENU
OFF
SELECT
MENU OFF
Display DATE menu
Highlight Year, Month, Day, hour, or
minute (selected item blinks on and
off in green)
.9
.10
4
DATE
DATE
MENU
OFF
SELECT
SET
MENU OFF
SELECT
SET
Edit selected item. Repeat steps 4.8–
4.9 until all items have been set.
Highlight Y M D
.11
4
.12
4
DATE
DATE
Brightness
CF Card Format
Date
Auto Off
Language
USB
MENU
OFF
SELECT
SET
MENU OFF
SELECT
SET
Choose order in which year, month,
and day will be displayed
Save changes to settings and
return SET-UP menu
Any pictures taken before the time and date have been set will have a time
stamp of “0000.00.00 00:00.” If the time and date have not been set, a
flashing (“Date not set”) icon will be displayed in the top right corner of
the monitor when the camera is in
mode.
22
Taking Pictures
The Basics
This section details the basic steps involved in taking pictures in
mode. In
this automatic, “point-and-shoot” mode, the majority of camera settings are
controlled by the camera in response to shooting conditions, producing the
best possible results in most situations.
STEP 1 Ready the Camera
STEP 2 Choose Mode
23–24
25
STEP 3 Adjust Settings (Optional)
STEP 4 Frame the Picture
26
26–27
28–29
30
STEP 5 Focus and Shoot
STEP 6 Put the Camera Away
Step 1—Ready the Camera
.1 Turn the lens section to shooting position
1
Rotate the lens as shown.
.2 Slide the mode selector to
1
When you slide the mode selector from OFF
to
, the flash-ready lamp under the moni-
tor will light and the monitor will display a
welcome message.
The Lens Section
When adjusting the angle of the lens, rotate the
lens section slowly; do not use excessive force.
Care should be taken to avoid catching fingers,
hair, or clothing between the lens section and the
camera body.
23
.3 Check indicators in the monitor
Before shooting, check the battery level (A)
and number of exposures remaining (B).
1
A
B
15
2048 NORMAL
Battery Level (A)
The battery level is displayed as follows:
Display
Meaning
Camera status
NO ICON
Battery fully charged Camera functions normally.
Recharge or replace battery
without delay.
Low battery
WARNING ! !
BATTERY
EXHAUSTED
No pictures can be taken until
Battery exhausted battery has been recharged or
replaced.
Number of Exposures Remaining (B)
If the number of exposures remaining is zero, a message will be dis-
played in the monitor. In this case, delete pictures ( 33–34), use a
new memory card, or choose a lower quality or image size ( 50).
24
Step 2—Choose
Mode
.1
.2
2
2
15
15
2048 NORMAL
2048
NORMAL
Press multi selector down to display
shooting-mode menu*
Select
(selected
option is highlighted in green)
.3
2
Press multi selector to right to exit menu
(if no operation is performed for about two
seconds, menu will close and original set-
ting will be restored). Current shooting
mode is shown by icon at top left corner
of monitor.
2048
NORMAL
15
*When you press the multi selector down to display the shooting-mode menu,
the current shooting mode will be highlighted. If mode is already se-
lected, press the multi selector to the right to exit the menu.
25
Step 3—Adjust Camera Settings (Optional)
The following table shows the default settings for
mode. For more infor-
mation, refer to the page numbers in the rightmost column.
Setting Default
Description
Flash
Auto
mode
Flash fires automatically when lighting is
poor.
43
Self timer
Off
Self-timer off.
45–46
Pictures compressed for balance between
NORMAL quality and file size that is ideal for snap-
shots.
Image
quality
51
Image
size
2048
Pictures are 2,048 × 1,536 pixels in size.
52
53
Exp. +/–
±0
No exposure compensation performed.
Step 4—Frame the Picture
.1 Adjust the lens angle
4
The lens section can be rotated
Forward
Back (toward monitor)
0°
130° forward from its housing
in the camera body, and 90°
back toward the monitor. To
frame a quick arms-length self-
portrait, rotate the lens to point
in the same direction as the
monitor (in this position, the
monitor will show a mirror
image of what will appear in the
final photograph).
50°
50°
90°
Range of rotation
Shooting position
130°
When the lens is obscured by the camera body, a warning will be dis-
played in the monitor and pictures can not be taken. To clear the mes-
sage from the monitor, rotate the lens section to shooting position.
26
.2 Ready the camera
4
4
Hold the camera steadily in both hands.
.3 Frame your subject
Use the zoom buttons to frame your subject against the background.
Indicator in monitor
shows amount of
zoom while either
button is pressed
Zoom out
Zoom in
2048
NORMAL
15
When the camera is zoomed all the way in, holding the
button down
for about two seconds extends the zoom range digitally (digital zoom;
47). The zoom indicator turns yellow when digital zoom is in effect.
Don’t Block the Shot
To avoid dark or partially obscured pic-
tures, keep your fingers and other ob-
jects away from the lens and flash
window.
Smear
When you frame bright subjects, vertical comet-like streaks that whiten to-
ward either end may appear in the monitor. This phenomenon, known as
“smear,” does not appear in the final photograph and does not indicate a
malfunction. Some smearing may appear in movies.
27
Step 5—Focus and Shoot
.1 Focus
5
Press the shutter-release button
halfway to set focus and expo-
sure. The camera will focus on
the subject closest to the cam-
era, and lock focus at this dis-
tance while the shutter-release
button is pressed halfway.
With the shutter-release button
pressed halfway, check the fo-
cus indicator and flash-ready
lamp.
Focus indicator
l i g h t s w h e n
shutter-release
button is pressed
halfway
15
2048
NORMAL
Flash-ready lamp
Green
Subject in focus.
Focus
indicator
Camera unable to focus. Change your
composition and try again.
Flashes red
On
Flickers
Off
Flash will fire when picture is taken.
Flash-
ready
lamp
Flash charging. Remove finger briefly from
shutter-release button, then try again.
Flash off or not required.
When Lighting Is Poor
If lighting is poor, the view through the camera lens may appear slightly
“grainy” when viewed in the monitor.
28
.2 Take the picture
5
Smoothly press the shutter-release button
the rest of the way down to take a picture.
After each shot, the picture you have just
taken will be displayed briefly in the moni-
tor before being recorded to the memory
card. If you are not satisfied with the re-
sults, you can delete the picture instantly by
pressing the ( ) button. If you need more
time to study the picture, you can pause the
display for up to ten seconds by pressing
the
( ) button. For more information,
see “Keep or Delete” ( 48).
Getting Good Results with Autofocus
Autofocus performs best when there is contrast between the subject and
background and the subject is evenly lit. It does not perform well if the sub-
ject is very dark or moving rapidly, if there are objects of sharply differing
brightness in the scene (e.g., the sun is behind your subjects and their fea-
tures are in deep shadow), or if the subject contains objects at different dis-
tances from the camera (e.g., the subject is inside a cage).
During Recording
While pictures are being recorded to the memory card, a
played in the monitor.
icon will be dis-
Pictures taken while earlier images are being recorded are stored in a tempo-
rary memory buffer. When the buffer is full, an hourglass ( ) icon will be
displayed and the shutter release will be disabled.
Do not turn the camera off, remove the memory card, or remove or discon-
nect the power source while or
is displayed.
29
Step 6—Put the Camera Away
.1 Turn the camera off
6
Turn the camera off to save battery power.
.2 Return the lens section to the closed position
6
To protect the lens, return the lens section
to its housing in the camera body.
30
Review and Deletion
Quick Review
Using the quick review function on your Nikon digital camera, you can view
the results of earlier attempts while setting up the next shot, and use what
you see to change camera settings or to choose a better angle. Once you
have the shot you want, you can delete your failures instantly to make room
for more shots on the memory card.
To use quick review, the camera must be in
mode. Press the
but-
ton once to display the most recent picture at the top left corner of the moni-
tor, twice to display pictures full screen. Pressing the button a third time
returns you to
mode.
1
2048
NORMAL
14
2048
NORMAL
14
2048
NORMAL
1/0011
Mode
Quick Review
Full-Screen Review
Pictures are displayed Pictures are displayed
in the top left corner of full screen or in menus
the monitor, allowing of four or nine “thumb-
you to view the results nail” images. You can
of previous attempts zoom in on and delete
while setting up your individual pictures.
next shot.
31
Quick Review
The following operations can be performed in
quick review:
1
2048
NORMAL
14
To
Press
Description
Press the multi selector up to view pictures
recorded before the current photo, down to
view pictures recorded after the current
photo.
View other
pictures
View current
picture full screen
Enter full-screen review (see below) with the
current picture displayed full screen.
Return to
shooting mode
Shutter To return to shooting mode, press the shut-
release ter-release button halfway.
All other camera controls function as they do in shooting mode.
Full-Screen Review
The following operations can be performed in full-
screen review:
2048
NORMAL
1/0011
To
Press
Description
Press the multi selector up to view pictures
recorded before the current photo, down to
view pictures recorded after the current pho-
to. Keep multi selector pressed to scroll rap-
idly to the desired frame number.
View other
pictures
32
To
Press
Description
Press the
(
) button to display up to
View multiple
pictures
(
) nine pictures at a time as small thumbnail pre-
views (see following page).
A confirmation dialog will be displayed. Press
multi selector up or down to highlight op-
tion, press to right to select.
•Select No to exit
without deleting
picture
DELETE
Delete current
picture
( )
•Select Yes to de-
lete picture
No
Yes
SELECT
SET
Press the
(
) button for an enlarged view
of the current photo ( 71). While the pho-
) to is zoomed in, use the multi selector to view
areas not visible in the monitor. To cancel
Zoom photo in
(
zoom, press
Pictures selected for transfer are marked with
icon. Turn this marking on or off to
select the pictures that will be transferred to
a computer at a later date ( 82).
.
Select current
picture for transfer
to a computer
a
(
)
Press multi selector to left to hide or display
photo info superimposed on picture in mon-
itor ( 7).
Hide or display
photo info
Shutter To end review and return to shooting mode,
release/ press the button or press the shutter-
release button halfway.
Return to
mode
33
Thumbnail Review
Pressing the
(
) button in full-screen review
displays a menu of four thumbnail images. The
following operations can be performed while
thumbnails are displayed:
To
Press
Description
Press the multi selector up, down, left, or right
to highlight thumbnails.
Highlight pictures
With four thumbnails displayed, press the
button once to view nine thumbnail images.
Change number of
pictures displayed
Press
(
) to “zoom in” from nine thumb-
(
)/
)
nails to a four-thumbnail view or, when four
thumbnails are displayed, to view highlighted
picture full size.
(
A confirmation dialog will be displayed. Press
multi selector up or down to highlight op-
tion, press to right to select.
•Select No to exit
without deleting
picture
DELETE
Delete highlighted
picture
( )
•Select Yes to de-
lete picture
No
Yes
SELECT
SET
Pictures selected for transfer are marked with
icon. Turn this marking on or off to
select the pictures that will be transferred to
a computer at a later date ( 82).
Select highlighted
picture for transfer
to a computer
a
(
)
Shutter To end review and return to shooting mode,
release/ press the button or press the shutter-
release button halfway.
Return to
mode
34
Playback Mode ( 67)
This section describes quick review, which allows you to view pictures without
leaving
mode. To learn about additional playback options available in
(playback) mode, see “Playing Pictures Back” ( 67).
35
Getting Creative
Scene Selection
Your Nikon digital camera offers a choice of “scene” modes for common
compositions, such as portraits, landscapes, and close-ups, which require special
combinations of settings that apply to any scene of the same type. When a
scene is selected from the SCENE menu, camera settings are automatically
adjusted to produce optimal results for the selected composition, sparing you
the necessity of adjusting camera settings one-by-one.
Scene selection is only available in
and
modes (for information on
choosing a shooting mode, see “Tutorial: Taking Pictures”;
a scene:
23). To choose
1
2
Portrait
SELECT
SET
SELECT
SET
Press SCENE button to display menu
of scene choices
Make selection (chosen scene takes
effect when option is highlighted;
highlighted scene shown by icon and
caption in monitor)
3
Press SCENE button to return to shooting
mode (selected scene shown by icon in
monitor)
2048
NORMAL
15
36
In scene mode, you can adjust flash ( 43) and self-timer ( 45) settings
(restrictions may apply depending on the scene selected). Pressing the MENU
button will display the SHOOTING menu ( 49). To return to
or
mode, select OFF in the SCENE menu.
The following pages describe when to use each scene mode.
Portrait
Use for portraits. Main subject stands out clearly while back-
ground details are softened, lending the composition a sense
of depth.
•Flash mode set to
be selected ( 43).
(auto with red-eye reduction); other modes can
•Degree to which background details are softened depends on the amount
of light available.
Party/Indoor
Use for shots that include details of the background be-
hind the main subject, or to capture the effects of candle-
light and other indoor background lighting.
•Flash mode set to
be selected ( 43).
(auto with red-eye reduction); other modes can
Camera Shake: ✯
Camera Shake
At slow shutter speeds, a icon appears in the monitor. Pictures taken at
these speeds may be blurred by inadvertent camera movement (“camera
shake”). While use of a tripod is recommended when this icon is displayed,
other methods that may be successful in preventing blurring at a given setting
are indicated by the number of stars in the “Camera Shake” rating:
✯
Support the camera steadily in both hands with your elbows against
your torso.
✯✯ Place the camera on a flat, level surface such as a wall or table.
37
Night Portrait
Use for shots that provide a natural balance between the
main subject and the background when shooting portraits
against a backdrop of night scenery.
•Flash mode fixed at
(auto with red-eye reduction;
43).
Camera Shake: ✯
Beach/Snow
Vividly captures the brightness of such subjects as snow-
fields, beaches, or sunlight expanses of water.
•Flash mode set to AUTO; other modes can be selected ( 43).
Landscape
Use for vivid landscape shots that enhance outlines, colors,
and contrast in such subjects as skyscapes and forests.
•Flash turns off ( ) automatically.
•Focus is fixed at infinity, allowing the camera to focus on distant scenes
through foreground objects such as a window or a screen of branches.
The focus indicator (AF✯) is not displayed.
Noise Reduction
“Noise” in the form of randomly-spaced, brightly-colored pixels tends to ap-
pear in pictures taken at slow shutter speeds. This effect is particularly notice-
able in dark areas of the picture. At settings of Night Portrait and Night
Landscape, pictures taken at slow shutter speeds are processed to reduce
noise before being saved to the memory card. As result, more time is required
to save pictures to the memory card.
38
Sunset
Preserves the deep hues seen in sunsets and sunrises. Flash
turns off ( ) automatically.
Camera Shake: ✯
Night Landscape
A slow shutter speed is used to produce stunning night
landscapes.
•Focus is fixed at infinity; the focus indicator (AF✯) is not displayed.
•Flash turns off ( ) automatically.
Camera Shake: ✯✯
Museum
Flash turns off ( ) automatically. Use indoors where flash
photography is prohibited (for example in museums and
art galleries) or in other settings in which you do not want
to use the flash.
•The Best Shot Selector (BSS;
effects of inadvertent camera movement.
•Photography may be prohibited altogether in some settings. Be sure to
57) turns on automatically, reducing the
obtain permission first.
Camera Shake: ✯
Fireworks Show
Slow shutter speeds are used to capture the expanding burst
of light from a firework. The camera responds more rapid-
ly to the shutter-release button, ensuring that you can cap-
ture the start of the burst.
•Focus is fixed at infinity; the focus indicator (AF✯) is not displayed.
•Flash turns off ( ) automatically.
•Follow the firework as it ascends and press the shutter-release button all
the way down at the start of the burst.
•Self-timer can not be used ( 45).
Camera Shake: ✯✯
39
Close Up
Camera is set to focus on objects as close as 4 cm (1.6˝)
from the lens, making it possible to capture vivid colors in
close-up shots of flowers, insects, and other small objects,
with the background artistically blurred.
•Flash mode set to AUTO; other modes can be selected ( 43).
•Camera automatically selects middle zoom position for a minimum focus
distance of 4 cm/1.6˝ (measured from lens). Minimum focus distance will
increase if camera is zoomed in or out.
•Camera focuses on subject at center of frame.
Camera Shake: ✯
Copy
Provides clear pictures of text or drawings on a white board,
business card, or in other printed matter.
•Flash mode set to
(off); other modes can be selected ( 43).
•Colored text and drawings may not show up well in the final picture.
Back Light
Use when light is coming from behind your subject, throw-
ing their features into shadow, or when your subject is in
the shade but the background is brightly lit. The flash will
fire automatically to “fill in” (illuminate) shadows.
•Flash mode fixed at (fill flash;
43).
OFF
Select this item to return to the shooting mode (
or
) in effect when scene mode was selected. The mode
last in effect will be displayed in the monitor when this
option is highlighted.
SET
SELECT
40
Beyond Point-and-
Shoot
Taking
42–48
Pictures
Fine-Tuning Camera
Settings
The Details
49–58
In “Tutorial: Taking Pictures,” you learned the basic
order of operations for taking pictures in mode.
This chapter details the options available for taking
pictures in all shooting modes. It is divided into the
following sections:
Beyond Point-and-Shoot
Read this section for advice on the most frequently-
used camera controls, including shooting-mode and
scene selection, flash mode, the self-timer, and
zoom, as well as for information on the operations
that can be performed while pictures are displayed
in the monitor after shooting.
Fine-Tuning Camera Settings
This section details the options available in the
SHOOTING menu.
41
Beyond Point-and-Shoot
Camera Controls
,
, or Movie: Choosing a Shooting Mode
In
information on choosing a shooting mode, see “Tutorial: Taking Pic-
tures”; 23):
mode, you have a choice of four basic shooting modes (for
Auto produces good results in a wide range of situations. Use
for snapshots or when you want control over image quality (
Auto 51), image size ( 52), and exposure compensation ( 53) while
leaving the camera in charge of other settings.
Choose this mode for complete control over all camera settings,
including white balance ( 54), sharpening ( 58), and BSS (
Manual 57). You can also choose to take pictures in continuous sequence
while the shutter-release button is held down ( 56).
This mode is used to record silent movies 320 × 240 pixels in size
(QVGA) at a rate of about fifteen frames per second. Recording
begins when the shutter-release button is pressed all the way
down and ends when the shutter-release button is fully pressed
a second time.
•In place of the number of exposures remaining, the exposure-
count display in monitor shows the length of the movie that
can be recorded.
•Movie ends automatically after 35 seconds or when no more
space is available on the memory card.
Movie
•Movies are stored as QuickTime movie files ending in “.MOV”.
•The flash turns off ( ) automatically.
•Menus and scene-selection are disabled in movie mode
•If the lens is rotated to point in the same direction as the mon-
itor during recording, the display in the monitor will be inverted
and the movie will be recorded upside down.
Pressing the SCENE button in
or
mode displays a menu of twelve
“scenes,” where you can choose an option suited to your subject and com-
position and let the camera adjust settings for best results. For more infor-
mation, see “Tutorial: Getting Creative” ( 36).
42
AUTO
Flash Photography: The Button
In
mode, the button controls the flash. Four flash modes are available
36):
(restrictions may apply in scene mode;
Mode
How it works
When to use it
Best choice in most circumstances.
AUTO
Auto
Flash fires when
lighting is poor.
Pre-flash fires be- Use for portraits (works best when sub-
fore main flash. jects are well within range of flash and
This causes sub- looking at pre-flash). Because a slight
jects’ pupils to con- delay occurs after the shutter-release
tract before photo button is fully pressed to allow the pre-
is taken, minimizing flash to take effect, this setting is not
“red-eye” effect recommended with erratically-moving
caused by flash re- subjects or in other situations in which
flecting from retina. you want the camera to react quickly.
Auto with
red-eye
reduction
Use when subject is outside range of
Flash will not fire flash, to capture natural lighting under
Flash Cancel even when lighting dim light, or where use of a flash is pro-
(off)
is poor.
hibited. Use of a tripod is recommend-
ed to prevent blurring.
Flash fires whenev- Use to “fill-in” (illuminate) shadows and
er picture is taken. back-lit subjects.
Anytime Flash
(fill flash)
The Flash-Ready Light
A short pause is required between exposures for the flash system to charge. If
the shutter-release button is pressed halfway while the flash is charging, the
flash-ready light under the monitor will flicker. Remove your finger briefly
from the shutter-release button and try again.
43
The flash mode can be selected with the button:
1
2
AUTO
AUTO
2048
NORMAL
15
2048 NORMAL
15
Press button to display
flash-mode menu
Press multi selector up or down until
desired mode is highlighted
3
Press multi selector to right to exit menu
(flash-mode menu will also close if no op-
eration is performed for about two sec-
onds). Current flash mode is shown by icon
at bottom of monitor.
2048
NORMAL
15
The ISO (Sensitivity Gain) and (Camera Shake) Icons
When lighting is poor and the flash is off ( ), the camera will automatically
raise its sensitivity to light for faster exposures, minimizing blur caused by
camera shake. When sensitivity is raised above the default value, an ISO icon
will appear in the monitor to warn that “noise” may appear in the final pic-
ture. If the shutter speed required for exposure is very slow, a (camera
shake) icon will appear in the monitor. Use of a tripod or support is recom-
mended.
44
ON
OFF
Delaying Shutter Release: Choosing a Self-Timer Mode
When the self-timer is on, pictures will not be taken until ten seconds after
the shutter-release button is pressed all the way down, giving you time to
position yourself in front of the camera when taking pictures in which you
want to appear yourself. When taking low-light or close-up shots with the
flash off, the self-timer can be used to prevent pictures from being blurred by
camera movement that occurs when the shutter-release button is pressed.
To use the self-timer:
Position the camera
1Mount the camera on a tripod (recommended) or rest it on a flat, stable
surface.
Turn the self-timer on
2The self-timer setting is controlled with the multi selector.
.1
.2
2
2
2
ON
ON
OFF
OFF
2048
NORMAL
15
NORMAL
15
2048
Press multi selector up or
Press multi selector up to
display self-timer menu
down to highlight ON
.3
Press multi selector right to exit menu
(if no operation is performed for about
two seconds, menu will close and origi-
nal setting will be restored). When timer
is on, self-timer icon is displayed in moni-
tor.
NORMAL
15
2048
45
Compose the picture
3Adjust camera settings and frame the picture. Remember that the camera
will focus on the closest object; compose your picture with no other ob-
jects between your subject and the camera.
Start the timer
4Press the shutter-release button all the way down to lock focus and acti-
vate the timer.
Count-down timer in monitor shows
number of seconds remaining until
picture is taken
2048
NORMAL
15
Full press
The self-timer lamp on the front of the camera
will start to blink when the shutter-release but-
ton is pressed, and continue to blink until one
second before the photo is taken. The self-
timer lamp will stay lit during the final second
to warn that the shutter is about to be released.
To stop the timer before a picture is taken, press
the shutter-release button.
I
I
I
I
5.6-16.8mm1:2.7-4.8
Restrictions on the Self-Timer
The self-timer is not available in movie mode ( 42) or when Fireworks
Show ( 39) is selected in scene mode.
Digital Zoom
The Multi-shot 16 option in the Continuous menu ( 56) is not available
when digital zoom is in effect.
46
Framing Pictures: Optical and Digital Zoom
Your Nikon digital camera offers two kinds of zoom: optical zoom, in which
the camera’s telescoping lens can be used to magnify the subject up to 3 ×,
and digital zoom, in which digital processing is used to further magnify the
image up to 4 ×.
Optical Zoom
Photos can be framed in the monitor using the zoom buttons.
Indicator in monitor displays
amount of zoom while either
button is pressed
Zoom out
Zoom in
Optical zoom is not available in movie mode, although digital zoom can be
used to magnify the subject up to about 3 ×.
Digital Zoom
At the maximum optical zoom position, holding the
button down for two
seconds triggers digital zoom.
Maximum optical zoom
position
Zoom indicator turns yellow
in digital zoom range
Hold for 2 s
The camera can be zoomed in and out in the digital zoom range by pressing
the and buttons. To restore ordinary optical zoom, press until the
zoom indicator turns white.
In digital zoom, data from the camera’s image sensor are processed digitally,
enlarging the center portion of the picture to fill the frame. Unlike optical
zoom, digital zoom does not increase the amount of detail visible in the pic-
ture. Instead, details visible at maximum optical zoom are enlarged, produc-
ing a slightly “grainy” image. While digital zoom is in effect, the camera
focuses on the subject in the center of the frame, even if objects in other
areas of the frame are closer to the camera.
47
Keep or Delete: Picture Review
After each shot, the picture you have just taken
will be displayed briefly in the monitor until being
recorded to the memory card. The following op-
erations can be performed while the picture is dis-
played:
To
Press
Description
A confirmation dialog will be displayed. Press multi
selector up or down to highlight option, press to right
to select.
•Select No to save picture and
return to shooting mode
•Select Yes to delete picture
DELETE
Delete
picture
No
Yes
SELECT
SET
Display will be paused for ten
seconds and pause icon ( ) will
change to
. During this
time, you can press
to record picture and return to
shooting mode, or press
(
)
Pause
display
to delete photo as described above. Picture will be
recorded automatically if no operations are performed
for ten seconds.
48
Fine-Tuning Camera Settings
The
-Mode Menu
In
mode, changes to some settings are made with the help of a SHOOT-
ING menu that appears when the MENU button is pressed.
To make selections from the SHOOTING menu:
1
3
5
2
4
6
IMAGE QUALITY
SELECT
SET
MENU OFF
Slide mode selector to
Press MENU button to display
menu for current mode
IMAGE QUALITY
IMAGE QUALITY
FINE
NORMAL
BASIC
MENU OFF
SELECT
SET
MENU OFF
SELECT
SET
Highlight menu item
Display options
IMAGE QUALITY
FINE
NORMAL
BASIC
IMAGE QUALITY
MENU
OFF
SELECT
SET
MENU OFF
SELECT
SET
Highlight option
Make selection
(to return to previous menu, press
multi selector to left)
To exit the menu and return to shooting mode, press the MENU button.
49
The options available in the SHOOTING menu depend on the shooting mode
selected. No menu is available in movie mode.
SHOOTING MENU
Option
IMAGE QUALITY
IMAGE SIZE
EXP. +/–
51
52
53
MENU OFF
SELECT
SET
Shooting menu
, scene)
(
SHOOTING MENU
Option
IMAGE QUALITY
IMAGE SIZE
51
52
WHITE BALANCE
EXP. +/–
54–55
53
SELECT
SET
MENU OFF
Shooting menu
CONTINUOUS
56
(
mode)
BEST SHOT SELECTOR
IMAGE SHARPENING
57
58
Making Effective Use of Memory: Image Quality and Size
Together, image quality and size determine how
much space each picture occupies on the memory
card, which in turn determines the total number
of pictures that can be stored. The current image
size and quality are shown in the monitor.
15
2048 NORMAL
50
To get an idea of how different settings for image quality and size affect the
number of pictures that can be stored, view the table below, which shows the
approximate number of pictures that can be stored on 16- and 32-megabyte
memory cards at different combinations of image quality and size.
16-MB memory card
32-MB memory card
2048 1600 1280 1024 640 2048 1600 1280 1024 640
FINE
NORMAL
BASIC
10
19
37
16
31
59
24
47
37
86
20
32
62
49
75 172
69 144 39
94 138 287
86 121 229 75 117 172 242 457
*Figures are approximate. File size of JPEG images depends on scene record-
ed, producing wide variations in number of images that can be stored.
Image Quality
To reduce the amount of memory that each shot
occupies, pictures are compressed as they are saved
to the memory card. Compression selectively re-
duces the quality of the image; the more the pic-
ture is compressed, the more noticeable this loss
of quality is likely to be (the actual effect depends
on the size of the picture when printed or dis-
IMAGE QUALITY
SELECT
SET
MENU OFF
played and on the type of subject). The image-quality menu allows you to
choose the amount of compression performed.
Compression
ratio (approx.)
Option
FINE
Description
Fine image quality, suitable for enlarge-
ments or high-quality prints.
1 : 4
Normal image quality, suited to most ap-
plications.
NORMAL
1 : 8
Basic image quality, suitable for pictures
that will be distributed by e-mail or used in
web pages.
BASIC
1 : 16
51
Image Size
Image size refers to the physical dimensions of the
image, measured in pixels. Choose an image size
according to the space available on the memory
card and the task at hand.
IMAGE SIZE
MENU OFF
SELECT
SET
Option
2048
Size (pixels)
Description
Suited to print sizes of up to A4 (roughly
2,048 × 1,536
10˝ × 8˝).
Suited to print sizes ranging from large photo
album through to A5 (roughly 8˝ × 6˝).
1600
1280
1,600 × 1,200
1,280 × 960 Suited to postcard-size prints.
Suited to printing at smaller sizes (for exam-
1024
640
1,024 × 768 ple, as an illustration in a letter or report), or
to display on monitors 17˝ or larger.
Can be displayed full screen on 13˝ monitors.
640 × 480
Suited to distribution by e-mail or the web.
Print sizes assume a printer resolution of approximately 200 dpi.
Print Size
The size of pictures when printed depends on the resolution of the printer
(the higher the resolution, the smaller the final print size).
52
Adjusting Exposure: Exp. +/–
The Exp. +/– (exposure compensation) menu al-
lows you to alter exposure from the value sug-
gested by the camera, making pictures brighter
or darker.
+ –
/
EXP.
MENU OFF
SELECT
SET
At values other than ±0, exposure compensation
is shown in the monitor.
+0.3
15
2048 NORMAL
53
Keeping Colors True: White Balance
White balance is used to preserve natural colors
under different types of lighting. At settings other
than Auto, the current white balance setting is
shown in the monitor.
2048 NORMAL
Choosing a White Balance Setting
In
mode, white balance can be chosen from
and scene modes,
WHITE BALANCE
the following options (in
white balance is adjusted automatically):
MENU OFF
SELECT
SET
Option
Description
White balance automatically adjusted to suit light-
ing conditions. Best choice in most circumstances.
A Auto
White Bal Preset
White object used as reference to set white bal-
ance under unusual lighting conditions.
Fine
White balance adjusted for direct sunlight.
For use with incandescent lighting.
Incandescent
Fluorescent
Cloudy
For use with most types of fluorescent lighting.
Use for pictures taken under cloudy skies.
White balance adjusted to match light produced
by flash.
Speedlight
54
Preset White Balance
Preset white balance is used to adjust white bal-
ance when shooting under mixed lighting or to
compensate for light sources with a strong color
cast (for example, to make pictures taken under a
lamp with a red shade look as though they had
WHITE BALANCE PRESET
Cancel
Measure
SELECT
been taken under white light). When
(White
SET
MENU OFF
Bal Preset) is selected from the white-balance
menu, the camera will zoom in and the menu
shown at right will be displayed in the monitor.
Option
Cancel
Description
Recalls the most recent setting for preset white
balance from memory and sets white balance to
this value.
To measure a new value for white balance, place a
white object, such as a piece of paper, under the
lighting that will be used in the final photograph.
Frame this object so that it fills the square in the
center of the menu shown above. Highlight Mea-
sure and press the multi selector to the right to
measure a new value for white balance (shutter will
be released and camera will return to original zoom
position, but no picture will be recorded).
Measure
55
Taking Pictures in a Sequence: Continuous
The options in the “continuous” menu are used
to take pictures in a continuous sequence. This
can be useful when, for example, you are trying
to capture a fleeting expression on a portrait sub-
ject, or photograph a subject that is moving un-
predictably. With the Multi-Shot 16 option, you
CONTINUOUS
Single
Continuous
Multi-Shot 16
SELECT
SET
OFF
can record movement in a single picture consist-
ing of sixteen consecutive frames.
Option
Single
Description
Camera takes one picture each time the shutter-re-
lease button is pressed all the way down.
While the shutter-release button is held down, pic-
tures are recorded at a rate of about three frames ev-
ery two seconds. The camera will continue to take
pictures even when the memory buffer ( 29) is full,
although the rate at which pictures are recorded will
drop.
Continuous
Each time the shutter-release button is pressed, the
camera takes sixteen consecutive “thumbnail” imag-
es 512 × 384 pixels in size and combines them into a
collage measuring 2,048 × 1,536 pixels. This option
is not available at image sizes ( 52) other than 2048,
or when digital zoom ( 47) is in effect.
Multi-Shot 16
At settings other than Single, the current “con-
tinuous” setting is indicated by an icon in the moni-
tor.
2048 NORMAL
Flash, Focus Exposure, and White Balance
At settings of Continuous and Multi-Shot 16, the flash turns off, and focus
distance, exposure, and auto white balance are determined by the first pic-
ture in each series.
56
Getting Sharper Pictures: BSS (Best Shot Selector)
The “Best Shot Selector” (BSS) is recommended for
situations in which inadvertent camera movement
can produce blurred pictures, for example when:
• the camera is zoomed in
BEST SHOT SELECTOR
• the flash can not be used although lighting is
poor
On
Off
MENU OFF
SELECT
SET
BSS may not produce the desired results with a moving subject or if you change
the composition while the shutter-release button is pressed all the way down.
Option
Description
Camera takes photos as long as the shutter-release button is
held down, to a maximum of ten. These images are then com-
pared and the sharpest photo (the image with the highest level
of detail) saved to the memory card. The flash turns off, and
focus distance, exposure, and auto white balance are determined
by the first photograph in the series.
On
Off
BSS off; camera functions normally.
When BSS is on, a BSS icon appears in the monitor.
2048
NORMAL
15
Restrictions on BSS
BSS is not available at CONTINUOUS settings other than Single. Selecting
Continuous or Multi-Shot 16 automatically cancels BSS.
57
Making Edges More Distinct: Image Sharpening
The camera automatically emphasizes the borders
between light and dark areas of each picture, mak-
ing the image seem sharper. The effects are too
subtle to be seen in the camera monitor, but are
visible when the picture is viewed on a computer
IMAGE SHARPENING
A
u
to
High
No
Lo
f f
r
m
al
w
O
monitor or printed.
mode gives you control
SET
MENU OFF
SELECT
over the amount of sharpening performed (in
and scene modes, the camera adjusts sharpening
according to the subject).
Option
Auto
Description
Camera sharpens edges for optimal results; adjustment per-
formed differs from image to image.
Image processed to increase sharpness, making edges more
distinct.
High
Camera performs same standard level of sharpening on all
images.
Normal
Low
Off
Amount of sharpening reduced below normal level.
No sharpening performed.
When taking pictures that will later be retouched, choose settings of Normal
or Low.
At settings other than Auto, an image-sharpening
icon appears in the monitor.
2048 NORMAL
58
Camera
Setup
The SET-UP Menu
This chapter details the options available in the SET-
UP menu, where you can adjust basic camera set-
tings and perform such tasks as formatting memory
cards and restoring settings to their default values.
59
The SET-UP menu contains options for basic camera setup. The SET-UP menu
is accessed from the SHOOTING menu for , or scene mode (no
menu is available in movie mode). To make a selection from the SET-UP menu:
,
1
2
IMAGE QUALITY
MENU OFF
SELECT
SET
Slide mode selector to
Press MENU button to display menu
for current shooting mode
3
4
SHOOTING MENU
SET-UP
Brightness
CF Card Format
Date
Auto Off
Language
USB
Reset All
MENU OFF
SET
SELECT
SET
MENU OFF
SELECT
Highlight page tab (selected page
tab highlighted in green)
Highlight
5
6
BRIGHTNESS
Brightness
CF Card Format
Date
AUTO OFF
Brightness
CF Card Format
Date
Auto Off
Language
USB
Auto Off
Language
USB
Reset All
Reset All
SELECT
SET
MENU OFF
SELECT
SET
MENU OFF
Display SET-UP menu
Highlight menu item
60
7
9
8
AUTO OFF
Brightness
CF Card Format
Date
Auto Off
Language
USB
AUTO OFF
Brightness
CF Card Format
Date
Auto Off
Language
USB
Reset All
MENU OFF
Reset All
MENU OFF
SELECT
SET
SELECT
SET
Display options
Highlight option
(to return to previous menu, press
multi selector to left)
To exit the menu and return to shoot-
ing mode, press the MENU button.
AUTO OFF
Brightness
CF Card Format
Date
Auto Off
Language
USB
Reset All
MENU OFF
SELECT
SET
Make selection
The SET-UP menu contains the following options:
SET-UP
Option
Brightness
CF Card Format
Brightness
Date
62
62
63
63
64
64
66
Auto Off
CF Card Format
Language
USB
Date
Reset All
SET
MENU OFF
SELECT
Auto Off
Language
USB
Reset All (
only)
SET-UP Menu Options
The Brightness and CF Card Format options can also be accessed from the
playback menu in mode ( 75).
61
Adjusting Monitor Brightness: Brightness
This option controls monitor brightness. Press the
multi selector up or down to increase or decrease
the brightness of the monitor by moving the ar-
row to the right of the display up or down.
BRIGHTNESS
MENU OFF
SELECT
SET
Formatting Memory Cards: CF Card Format
The memory card provided with your camera is
formatted at shipment. If you purchase additional
memory cards for added storage, you will how-
ever need to format the cards before first use to
ensure that they work properly in your camera.
Formatting memory cards is also an effective way
of deleting all pictures on the card.
CF CARD FORMAT
WARNING !
All images will
be deleted !
No
Format
SELECT
SET
MENU OFF
Selecting CF Card Format from the setup or playback menus displays the
confirmation dialog shown above. To format the memory card:
1
2
CF CARD FORMAT
WARNING !
All images will
be deleted !
No
F O R M A T T I N G
Format
MENU OFF
SELECT
SET
Highlight Format (to exit without
formatting card, highlight No and
press multi selector to right)
Press multi selector to right to start
formatting. Formatting begins
immediately. While formatting is in
progress, the message shown above
will be displayed.
During Formatting
Do not remove the memory card, remove the battery, or unplug the
AC adapter (available separately) while formatting is in progress.
62
Setting the Time and Date: Date
This option is used to set the camera to the cur-
rent date and time. For more information, see
“Tutorial: First Steps” ( 21).
DATE
MENU OFF
SELECT
SET
Conserving Battery Power: Auto Off
When operated on battery power, the camera will
enter sleep mode if no operations are performed
for thirty seconds (or three minutes when menus
are displayed). The time limit for sleep mode can
be chosen from thirty seconds (30 s), one minute
(1 m), five minutes (5 m), and thirty minutes (30 m)
using Auto Off.
AUTO OFF
Brightness
CF Card Format
Date
Auto Off
Language
USB
Reset All
MENU OFF
SELECT
SET
Before Formatting
Formatting memory cards permanently deletes all data they contain, includ-
ing protected pictures and any other data that may be on the card. Before
formatting, be sure to transfer to a computer any pictures you would like to
keep.
Sleep Mode (Auto Off)
In sleep mode, the camera itself is effectively off, consuming almost no power.
The camera can be reactivated by pressing the shutter-release button or slid-
ing the mode selector to a new position.
When powered by an AC adapter kit (available separately;
87), the camera
will remain on for thirty minutes if no operations are performed, regardless of
the setting in the Auto Off menu.
63
Choosing a Language: Language
This option is used to choose the language in which
camera menus and messages are displayed. For
more information, see “Tutorial: First Steps”
LANGUAGE
Brightness
CF Card Format
Date
Auto Off
Language
USB
(
19).
Reset All
MENU OFF
SELECT
SET
Choosing a USB Protocol: USB
Before pictures can be copied to a computer via
direct USB connection ( 82), you will need to
select a USB transfer protocol that matches that
used by your computer’s operating system. The
default setting is Mass Storage.
USB
Brightness
CF Card Format
Date
Auto Off
Language
USB
Reset All
MENU OFF
PTP
Mass Storage
SELECT
SET
Operating system
USB protocol
Windows XP Home Edition
Windows XP Professional
Choose either PTP or Mass Storage.
Mac OS X (version 10.1.2 or later)
Choose PTP.
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Mac OS 9 (9.0, 9.1, 9.2)
Choose Mass Storage.
Mac OS X
Pictures can not be transferred using the camera
(
) button in Mac OS
X 10.1.2. Use the button in Nikon View to transfer pictures. See the
Nikon View 5 Reference Manual (on CD) for details. The camera
(
)
button can be used to transfer images in Mac OS X 10.1.3 or later.
64
Windows 2000 Professional, Windows Millennium Edition (Me),
Windows 98 Second Edition (SE), Mac OS 9 (9.0, 9.1, 9.2)
Do not select PTP when connecting the COOLPIX 3500 to a computer run-
ning one of the above operating systems (there is no need to change the USB
setting when using the camera for the first time, as Mass Storage is selected
at shipment).
If you have already changed the USB setting to PTP, be sure to select Mass
Storage before connecting the camera to your computer.
If you have connected the camera to a computer running one of the above
operating systems with PTP selected in the USB menu, disconnect the cam-
era as described below. Be sure to select Mass Storage in the USB menu
before reconnecting the camera.
Windows 2000 Professional
A dialog will be displayed welcoming you to the Found New Hardware Wiz-
ard. Click Cancel to close the dialog, and then disconnect the camera.
Windows Millennium Edition (Me)
After displaying a message stating that the hardware information database is
being updated, the computer will start the Add New Hardware Wizard. Click
Cancel to exit the wizard, and then disconnect the camera.
Windows 98 Second Edition (SE)
The Add New Hardware Wizard will be displayed. Click Cancel to exit the
wizard, and then disconnect the camera.
Mac OS 9 (9.0, 9.1, 9.2)
A dialog will be displayed stating that the computer is unable to use the driver
needed for the “Nikon Digital Camera E3500_PTP” USB device. Click Cancel
to close the dialog, and then disconnect the camera.
65
Restoring Default Settings: Reset All (
Reset All is used to reset settings to their default
values. This option is only available in the SET-UP
Mode Only)
RESET ALL
Reset all settings
to default values
menu for
modes.
mode, but resets settings for all
No
Reset
MENU OFF
SELECT
SET
Option
Description
No
Exit menu, leaving settings unchanged.
Restore settings to default values.
Reset
Choosing Reset restores the settings listed below to their default values.
Setting
White balance
Default
Auto
±0
Setting
Image sharpening
Monitor brightness
Auto off
Default
Auto
3
Exposure compensation
Continuous
Single
Off
30 s
Best Shot Selector
Choosing Reset also clears the current file number ( 69) from memory.
Numbering will continue from the lowest number available on the memory
card. All other settings are unaffected.
Resetting File Numbering to 0001
To reset file numbering ( 69) to 0001, select Reset All after either deleting
all pictures ( 77) or formatting the memory card ( 62).
66
Basic Playback
Playing
68–74
The Playback Menu
Pictures Back
Playback Mode
75–82
This section details the operations that can be per-
formed when the mode selector is set to . It is
divided into the following two sections:
Basic Playback
This section covers playback operations that can be
performed using the buttons on the back of the
camera and the multi selector.
The Playback Menu
Read this section for a description of the operations
that can be performed in the playback menu.
67
Basic Playback
Full-Frame and Thumbnail Playback
When the mode selector is set to , the camera
enters playback mode with the most recent pic-
ture displayed in the monitor.
1/0011
2048 NORMAL
The following operations can be performed in playback mode:
To
Press
Description
Press the multi selector up to view pictures record-
ed before the current photo, down to view pictures
recorded after the current photo. Keep multi se-
lector pressed to scroll rapidly to the desired frame
number.
View other
pictures
View
multiple
pictures
Press the
(
) button to display up to nine pic-
(
)
tures at a time as small thumbnail previews ( 70).
A confirmation dialog will be displayed. Press multi
selector up or down to highlight option, press to
right to select.
•Select No to exit without
deleting picture
•Select Yes to delete
Delete
current
picture
DELETE
( )
picture
No
Yes
SELECT
SET
68
To
Press
Description
Zoom
photo in
Press the
current photo ( 71).
(
) button for an enlarged view of the
(
)
Select
current
picture for
transfer to a
computer
Pictures selected for transfer are marked with a
icon. Turn this marking on or off to select the pic-
tures that will be transferred to a computer at a
later date ( 82).
(
)
Create small
copy of
SMALL If the current picture is a photograph, pressing the
PIC. button will create a small copy (320 × 240)
) for electronic distribution ( 72).
current
picture
(
If the current picture is marked with a
show that it is a movie, pressing the
starts and pauses movie playback ( 74).
icon to
button
Play movie
back
Hide or
display
photo info
Press multi selector to left to hide or display photo
info superimposed on picture in monitor ( 7).
Display
playback
menu
Press the MENU button to display or hide the play-
back menu ( 75).
MENU
Image File and Folder Names
Pictures taken with the COOLPIX 3500 are identified by file names that begin
with “DSCN” or, in the case of images created with the small picture function
(
72), “SSCN,” followed by a four-digit file number assigned automatically
by the camera (e.g., “DSCN0001”). Each file name ends in a three-letter
“extension” that identifies the type of picture: “.JPG” for photographs and
“.MOV” for movies. Picture files are stored in folders created automatically
by the camera and named with a three-digit folder number followed by
“NIKON” (e.g., “100NIKON”). The folder name and file number can be viewed
in full-screen review and full-frame playback, when they are displayed in the
top right corner of the monitor ( 7).
69
Thumbnail Review
Pressing the
(
) button in full-screen review
displays a menu of four thumbnail images. The
following operations can be performed while
thumbnails are displayed:
To
Press
Description
Highlight
pictures
Press the multi selector up, down, left, or right to
highlight thumbnails.
With four thumbnails displayed, press the
ton once to view nine thumbnail images. Press
but-
Change
number of
pictures
(
(
)/
)
(
) to “zoom in” from nine thumbnails to a four-
thumbnail view or, when four thumbnails are dis-
played, to view highlighted picture full size.
displayed
A confirmation dialog will be displayed. Press multi
selector up or down to highlight option, press to
right to select.
•Select No to exit with-
out deleting picture
•Select Yes to delete
Delete
highlighted
picture
DELETE
( )
picture
No
Yes
SELECT
SET
Select high-
lighted picture
for transfer to
a computer
Pictures selected for transfer are marked with a
icon. Turn this marking on or off to select
the pictures that will be transferred to a comput-
er at a later date ( 82).
(
)
Create small SMALL If the current picture is a photograph, pressing
copy of high-
PIC. the
button will create a small copy for elec-
lighted picture (
) tronic distribution ( 72).
70
Taking a Closer Look: Playback Zoom
Use the
(
) button to zoom in on photos dis-
X2.0
played in single-image playback (playback zoom
can not be used with movies or copies created
with the small picture function).
SCROLL
ZOOM
To
Press
Description
Zoom increases each time button is pressed,
to a maximum of 6.0 ×. While image is
zoomed in, icon and zoom ratio are dis-
played in upper left corner of monitor.
Zoom photo in
(
)
View other
areas of image
Press the multi selector to scroll to areas of the
image not visible in the monitor.
Cancel zoom
Press
to cancel zoom.
Playback Tips
In single-image playback, pictures are displayed briefly at low resolution while
being read from the memory card. This makes it possible to scroll rapidly
through the pictures in memory without waiting for each image to be dis-
played at full resolution.
To scroll quickly to a particular frame number without viewing the intervening
pictures, press and hold the multi selector. The picture displayed will not
change, but the frame number displayed at the bottom right corner of the
monitor will increase or decrease rapidly. Release the multi selector when the
desired frame number is reached.
The first and last pictures in memory are linked. Pressing the multi selector up
when the first picture in memory is displayed will take you to the last picture.
Pressing the multi selector down when the last picture is displayed takes you
to the first picture.
71
Creating a Small Copy of a Picture: Small Picture
Pressing the SMALL PIC. (
) button in full-frame or thumbnail playback
creates a small copy of the current picture. Copies are 320 × 240 pixels in size
and have an image quality of BASIC, making them ideal for distribution by e-
mail or for use in web pages.
To create a small copy of the picture currently displayed in full-frame play-
back, or the picture highlighted in thumbnail playback:
1
2
Small Pic
Small Pic
Creating small
Picture file ?
Creating small
Picture file ?
Yes
No
Yes
No
SELECT
SET
SELECT
SET
Press SMALL PIC. (
) button to
Highlight Yes (to exit without creat-
ing copy, highlight No and press
multi selector to right)
display confirmation dialog
3
4
2048
NORMAL
1/0011
2/0012
Create small copy and return to
playback mode with original picture
displayed
To view copy, press multi selector
down. Copy will have same time and
date of creation as original.
72
Once created, copies are independent of the original: deleting a copy has no
effect on the original, deleting the original no effect on the copy. Copies are
stored on the memory card as independent files with names of the form
“SSCNnnnn.JPG,” where “nnnn” is a four-digit number assigned automati-
cally by the camera. Copies will have the same transfer marking as the origi-
nals; print and protect attributes, however, must be set separately.
When displayed in full-frame playback and full-screen review, copies will oc-
cupy roughly one-quarter of the monitor and are surrounded by a gray frame.
In thumbnail playback and review, copies are indicated by a gray border. Copies
can not be viewed using playback zoom ( 71); pressing the
when a copy is displayed has no effect.
(
) button
Restrictions on Small Picture
The small picture function described in this section can not be used in quick
review.
Copies can not be created from movies. Additional copies of an image can
not be created from a small picture file; pressing the SMALL PIC. (
)
button when a copy is displayed will have no effect. Pressing the SMALL PIC.
button will also have no effect if there is not enough space for the copy on
the memory card.
The COOLPIX 3500 may not be able to create small copies from images taken
with another make of camera.
Viewing Small Picture Files on Other Cameras
Copies created with the small picture function may not display correctly when
viewed on other models of Nikon digital camera. You may also not be able to
transfer copies from other models of Nikon digital camera to a computer.
73
Movie Playback
Movies are indicated by a
icon. In full-frame
playback, movies can be viewed using the
button. Movies can not be played back when
thumbnails are displayed.
START
9/0019
To
Press
Description
When movie ends, final frame is displayed for
one second, followed by a still image of the
first frame.
Start playback
Pressing the
in progress pauses display. To resume play-
back, press the button again.
button while playback is
Pause/resume
playback
Rewind movie
one frame
When movie is paused, pressing the multi se-
lector up rewinds the movie one frame.
When movie is paused, pressing the multi se-
lector down advances the movie one frame.
If the last frame of the movie is displayed,
pressing the multi selector down ends movie
playback and displays the first frame of the
movie.
Advance
movie one
frame
Inverted Playback
Movies recorded with the lens pointing in the same direction as the monitor
will be played back upside down.
74
The Playback Menu
Managing Pictures
The playback menu contains options for deleting pictures and protecting im-
ages from deletion. You can also create a digital “print order” for printing
photographs on any device compatible with the Digital Print Order Format
(DPOF), and select images for transfer to a computer.
To view the playback menu:
1
2
DELETE
Delete
Print Set
Protect
Auto Transfer
CF Card Format
Brightness
MENU OFF
SELECT
SET
Select
Press MENU button to display
playback menu
The playback menu contains the following options:
DELETE
Option
Delete
Print Set
Delete
Protect
76–77
Auto Transfer
Print Set
CF Card Format
78–79
80
Brightness
Protect
SELECT
SET
MENU OFF
Auto Transfer
CF Card Format
Brightness
81
62
62
Memory Card Format/Brightness
The CF Card Format and Brightness options can also be accessed from the
SET-UP menu for
59).
mode. These options are described in “Camera Setup”
(
75
Deleting Pictures: Delete
The Delete menu contains the following options:
DELETE
Option
Description
Selected Images
All Images
Delete selected photo-
graphs and movies.
Selected Images
All Images
SET
MENU OFF
SELECT
Delete all pictures.
Deleting Selected Photographs and Movies
To delete selected photographs and movies:
1
2
DELETE
ERASE SELECTED IMAGES
Selected Images
All Images
MENU OFF
SELECT
SET
SELECT
SET
QUICK DONE
Highlight Selected Images
Display menu of thumbnail images
3
4
ERASE SELECTED IMAGES
ERASE SELECTED IMAGES
SELECT
SET
QUICK DONE
SELECT
SET
QUICK DONE
Highlight picture
Press multi selector up or down to se-
lect picture for deletion. Selected pic-
tures are marked by
icon. Repeat
steps 3 and 4 to select additional pic-
tures for deletion. To deselect picture,
highlight and press multi selector up
or down. To exit without deleting pic-
tures, press MENU button.
76
5
Press
to display a confirmation dia-
DELETE
log. Press multi selector up or down to
highlight option, press to right to put
choice into effect:
• Select No to return to playback menu
without deleting pictures
No
Yes
SET
MENU OFF
SELECT
• Select Yes to delete all selected pictures
Deleting All Photographs and Movies
To delete all pictures on the memory card:
1
2
ERASE ALL IMAGES
Erasing All Images
DELETE
(
)
Selected Images
All Images
Exclude
No
Yes
MENU OFF
SELECT
SET
MENU OFF
SELECT
SET
Highlight All Images
Confirmation dialog displayed. Press
multi selector up or down to highlight
option, press to right to put choice into
effect:
• Select No to return to playback menu
without deleting pictures
• Select Yes to delete all pictures on
memory card (protected pictures will
not be deleted)
Before Deletion
Once deleted, pictures can not be recovered. Be sure that any pictures you
would like to keep have been transferred to your computer.
Protected Pictures
Pictures marked with a
deletion.
icon are protected and can not be selected for
77
Ordering Prints: Print Set
Selecting Print Set from the playback menu dis-
plays the menu shown at right. Using the Print
set option, you can specify the pictures to be
printed, the number of prints, and the informa-
tion to be included on each print. This informa-
tion is stored on the memory card in Digital Print
Order Format (DPOF). Once a print order has been
created, the memory card can be removed from
PRINT SET
Print set
Delete print set
SET
MENU OFF
SELECT
the camera and inserted in any DPOF-compatible device—be it your personal
photo printer or a photofinisher’s print system—and pictures printed directly
from the card.
Option
Description
Create or modify print order.
Print set
Delete print set Cancel the current print order.
Selecting Pictures for Printing
To create a print order, or to modify the existing
print order, highlight Print set in the print set
menu and press the multi selector to the right.
The menu shown at right will be displayed. To
select pictures for printing:
PRINT
SELECT
SET
QUICK DONE
1
2
PRINT
PRINT
SELECT
SET
QUICK DONE
SELECT
SET
QUICK DONE
Highlight pictures
Press multi selector up to select
picture. Selected pictures are
marked by
icon.
78
3
4
Use multi selector to specify number of
prints. Press up to increase (maximum 9),
down to decrease. To deselect picture,
press multi selector down when number
of prints is 1. Repeat steps 1–3 to select
additional pictures. To exit without alter-
ing print order, press MENU button.
PRINT
SELECT
SET
QUICK DONE
Press
to complete operation and
PRINT SET
Done
display menu of print options. To high-
light option, press multi selector up or
down.
• To print shutter speed and aperture on
all selected photographs, highlight Info
and press multi selector to right. Check
will appear in box next to item.
Info
Date
SELECT
SET
MENU OFF
• To print date of recording on all selected
photographs, highlight Date and press
multi selector to right. Check will ap-
pear in box next to item.
• To deselect a checked item, highlight
and press multi selector to right.
• To complete print order and return to
playback, highlight Done and press multi
selector to right. To exit without alter-
ing print order, press MENU button.
“Date”
The Date option functions in much the same way
as the date imprint option in many film cameras.
For the date printed on your pictures to be cor-
rect, the clock calendar ( 21–22) must be set
correctly when the picture is taken. The date will
not appear on your pictures if the print system
used does not support the DPOF date function.
79
Safeguarding Valuable Pictures: Protect
Selecting Protect from the playback menu displays
the menu shown at right, where you can select
pictures to protect from accidental deletion.
PROTECT
SELECT
SET
QUICK DONE
1
3
2
PROTECT
PROTECT
SELECT
SET
QUICK DONE
SELECT
SET
QUICK DONE
Highlight picture
Press multi selector up or down to se-
lect picture. Selected pictures are
marked by
and 2 to select additional pictures. To
deselect picture, highlight and press
multi selector up or down.
icon. Repeat steps 1
Press
to complete operation. To
exit Protect menu without changing pro-
tected status of pictures, press MENU but-
ton.
DONE
Protected Pictures
Protected files can not be deleted in review, single-image playback, or from
the Delete sub-menu. Note, however, that protected pictures will be deleted
when the memory card is formatted.
80
Marking All Pictures for Transfer: Auto Transfer
To turn transfer marking ( 82) on or off for all
pictures simultaneously, select Auto Transfer from
the playback menu. The following options will be
displayed:
AUTO TRANSFER
All ON
All OFF
MENU OFF
SELECT
SET
Option
Description
All ON Mark all pictures on the memory card for transfer to a computer.
All OFF Remove transfer marking from all pictures on the memory card.
Transferring More than 999 Pictures
No more than 999 pictures can be transferred at one time using the
(
) button ( 82). To copy more pictures, use Nikon View. See the Nikon
View Reference Manual (on CD) for details.
Marking Pictures for Transfer with Other Cameras
Pictures selected for transfer with another model of Nikon digital camera can
not be transferred when the memory card is inserted in the COOLPIX 3500.
Use the COOLPIX 3500 to reselect the images.
81
Selecting Pictures for Transfer
Pictures selected for transfer to a computer are marked with a
icon. You
can turn transfer marking for selected pictures on or off by pressing the
) button while the pictures are displayed in playback mode ( 69, 70) or
in full-screen or thumbnail review ( 33, 34).
(
2048
NORMAL
1/0011
(
)
Full-screen review/
single-image playback
Thumbnail review/
thumbnail playback
button
Pictures are automatically marked for transfer as they are taken. If the se-
lected picture is already marked with a icon, pressing the ) but-
ton will turn transfer marking off. If the picture is not marked with a
icon, pressing the ) button will turn transfer marking on. If the
camera is connected to a computer as described below, pressing the
(
(
(
) button will transfer pictures marked with a
icon to the computer.
Transferring Pictures to a Computer
Once you have installed the Nikon View software provided with your camera,
you can connect the camera via the UC-E3 cable provided and copy (transfer)
selected pictures to your computer at the touch of a button.
Use UC-E3 cable to connect
camera directly to computer
as shown. Do not connect
camera via USB hub or key-
board.
Pictures can be transferred to the computer by pressing the
on the camera body or by clicking the button in Nikon View. For infor-
mation on installing Nikon View and transferring pictures using the
(
) button
(
)
button, see the Quick Start Guide. More information on using Nikon View
may be found in the Nikon View Reference Manual (on CD).
82
Technical
Notes
Camera Care, Options, and Resources
This chapter provides tips on cleaning and storing
your camera, a list of optional accessories available
for the COOLPIX 3500, information on where to
get help on line, troubleshooting advice, and cam-
era specifications.
83
Caring for the Camera and Battery
To ensure continued enjoyment of your Nikon product, observe the following
precautions when using or storing the device.
Keep dry
The device will be damaged if immersed in water or subjected to high
levels of moisture.
Handle the lens and all moving parts with care
Do not apply force to the lens or to the battery, card, and connector
covers. These parts are especially susceptible to damage.
Turn the product off before removing or disconnecting the power source
Do not unplug the product or remove the battery while the product is on,
or while images are being recorded or deleted. Forcibly cutting power to
the product in these circumstances could result in loss of data or in damage
to product memory or internal circuitry. To prevent an accidental
interruption of power, avoid carrying the product from one location to
another while the AC adapter is connected.
Do not drop
The product may malfunction if subjected to strong shocks or vibration.
Keep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment that generates
strong electromagnetic radiation or magnetic fields. Strong static charges
or the magnetic fields produced by equipment such as radio transmitters
could interfere with the monitor, damage data stored on the memory
card, or affect the product’s internal circuitry.
Avoid sudden changes in temperature
Sudden changes in temperature, such as occur when entering or leaving
a heated building on a cold day, can cause condensation inside the device.
To prevent condensation, place the device in a carrying case or a plastic
bag before exposing it to sudden changes in temperature.
84
Cleaning
Lens
One key to cleaning the lens is to not touch it with your fingers. Use a blower
(typically a small device with a rubber bulb attached to one end that you
pump to produce a stream of air out the other) to remove dust or lint. To
remove fingerprints or other stains that can not be removed with a blower,
wipe the lens with a soft cloth, using a spiral motion that starts in the center
of the lens and works out to the edges.
Monitor
Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Body
Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth.
After using the camera at the beach or seaside, wipe off any sand or salt with
a cloth lightly dampened with fresh water, then dry thoroughly.
Do not use alcohol, thinner, or other volatile chemicals
Avoid Contact with Liquid Crystal
Should the monitor break, care should be taken to avoid injury due to broken
glass and to prevent the liquid crystal from the monitor touching the skin or
entering the eyes or mouth.
Notes on the Monitor
•The monitor may contain a few pixels that are always lit or that do not light.
This is a characteristic common to all TFT LCD monitors and does not indi-
cate a malfunction. Images recorded with the product will not be affected.
•Images in the monitor may be difficult to see in a bright light.
•The monitor is lit by an LED backlight. Should the monitor begin to dim or
flicker, contact your Nikon service representative.
85
Storage
When the camera is not in use, turn the camera off and return the lens sec-
tion to its housing in the camera body. To prevent mold or mildew, store the
camera in a dry, well-ventilated area. If you will not be using the product for
long periods, remove the battery to prevent leakage and store the camera in
a plastic bag containing a desiccant. Do not, however, store the camera case
in a plastic bag, as this may cause the material to deteriorate. Note that
desiccant gradually loses its capacity to absorb moisture and should be re-
placed at regular intervals. Do not store your camera with naphtha or cam-
phor moth balls or in locations that:
• are poorly ventilated or damp
• are next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• are exposed to temperatures above 50 °C (122 °F) or below –10 °C (14 °F),
for example near a space heater or in a closed vehicle on a hot day
• are subject to humidities of over 60%
To prevent mold or mildew, take the camera out of storage at least once a
month. Turn the camera on and release the shutter a few times before put-
ting the camera away again.
Store the battery in a cool, dry place.
Batteries
•When you turn the device on, check the battery-level displayed in the moni-
tor to determine whether the battery needs to be replaced. A warning will
be displayed when the battery needs to be replaced.
•Ready a spare battery and keep it fully charged when taking pictures on
important occasions. Depending on your location, you may find it difficult
to purchase replacement batteries on short notice.
•On cold days, the capacity of batteries tends to decrease. Be sure the bat-
tery is fully charged before taking pictures outside in cold weather. Keep a
spare battery in a warm place and exchange the two as necessary. Once
warmed, a cold battery may recover some of its charge.
•Should the battery terminals become dirty, wipe them off with a clean, dry
cloth before use.
86
Optional Accessories
At the time of writing, the following optional accessories were available for the
COOLPIX 3500. Contact your local retailer or Nikon representative for details.
Rechargeable battery
Additional EN-EL2 Li-ion batteries are available
from your retailer or local Nikon representative
AC adapter EH-60/EH-60S AC adapter kit*
Carrying case CS-E2500 soft case
CompactFlash™ memory
EC-AD1 PC-card adapter
card adapters
Monitor (LCD) hood HL-E2500 LCD hood
*EH-60S available only in USA.
Memory Cards
Turn the power off before inserting or removing memory cards. Inserting or
removing cards with the power on could render them unusable.
Insert memory cards as shown in the illustration
at right. Inserting cards upside down or backwards
could damage the camera or the card.
Approved Memory Cards
In addition to the card provided with your camera, the following memory
cards have been tested and approved for use in the COOLPIX 3500:
All capacities
SanDisk SDCFB series 16 MB, 32 MB, 48 MB, 64 MB, 96 MB, 128 MB
Nikon
EC-CF series
4× USB series
8× USB series
10× USB series
8 MB, 16 MB, 32 MB, 48 MB, 64 MB, 80 MB
8 MB, 16 MB, 32 MB, 48 MB, 64 MB, 80 MB
128 MB, 160 MB
Lexar
Media
Operation is not guaranteed with other makes of memory card. For more
details on the above cards, please contact the manufacturer.
87
Web Resources
At the time of writing, the following on-line resources were available for users
of Nikon digital imaging equipment:
For Product Information and Tips
• For users in the USA: http://www.nikonusa.com/
• For users in Europe: http://www.nikon-euro.com/
• For users in Asia, Oceania, the Middle East, and Africa:
http://www.nikon-asia.com/
For Contact Information
Contact information for the Nikon representative in your area may be found at:
http://www.nikon-image.com/eng/
Troubleshooting
If your camera fails to function as expected, check the list of common prob-
lems below before consulting your retailer or Nikon representative. Refer to
the page numbers listed in the rightmost column for information on solving
the problems listed here.
Problem
Possible cause
•Camera is off.
6
•Battery is not correctly inserted.
•Battery is exhausted.
17
24
•AC adapter kit (available separately) is not 87
properly connected.
Monitor is blank
•Camera is in sleep mode. Press shutter-release 63
button halfway.
•USB cable is connected.
Camera turns off •Battery is low.
immediately •Battery is cold.
No indicators appear •Indicators are hidden. Press multi selector to
in monitor left until indicators are displayed.
—
24
86
7
88
Problem
Possible cause
•Ambient lighting is too bright: move to a dark- 87
er location or use HL-E2500 LCD hood (avail-
able separately).
Monitor is hard
to read
•Monitor is dirty.
85
62
•Monitor brightness requires adjustment.
•Camera is in playback mode.
•Battery is exhausted.
6
24
•Message “Please turn the lens to the shoot- 26
ing position” appears in monitor: lens is
blocked by camera body. Rotate lens section
until message is no longer displayed.
•Message “OUT OF MEMORY” appears in mon- 93
itor: insufficient memory to record pictures at
current settings.
No photo is taken
when shutter-release
button is fully
•Focus indicator flashes red: camera unable to 28
focus.
pressed
•Flash-ready lamp flickers: flash is charging.
28
•Message “CARD IS NOT FORMATTED” ap- 92
pears in monitor: memory card is not format-
ted for use in COOLPIX 3500.
•Message “NO CARD PRESENT” appears in 92
monitor: no memory card in camera.
•Flash is off.
Photos are too dark •Flash window is blocked.
43
27
96
53
(underexposed)
•Subject is outside range of flash.
•Exposure compensation is too low.
Photos are too bright
(overexposed)
•Exposure compensation is too high.
53
Photos are out of
focus
•
Focus indicator flashes red: camera unable to 28
focus.
89
Problem
Possible cause
•Camera shook during shot. Blurring caused
by camera shake can be reduced by:
–Using the flash
–Using the Best-Shot Selector (BSS)
–Using the self-timer
43
57
45
—
Photos are blurred
–Using a tripod
•Shutter speed too slow. Use the flash.
43
Randomly-spaced •Noise reduction, which helps reduce noise at 38,
bright pixels
(“noise”) appear in
image
slow shutter speeds, is available in the follow- 39
ing scenes: Night Portrait and Night Land-
scape. Using these scenes when appropriate
can reduce noise.
•Flash is off. Note that flash turns off auto- 43
matically when:
–Landscape, Sunset, Night Landscape, 38,
Museum, or Fireworks Show is selected 39
in scene mode
Flash does not fire
–Camera is in movie mode
–Continuous or Multi-Shot 16 is selected in 56
the CONTINUOUS menu ( mode only)
–BSS is on ( mode only)
•Battery level is low.
42
57
24
Colors are unnatural •White balance does not match light source. 54
No menu is displayed
when MENU button •Camera is in movie mode.
42
is pressed
90
Problem
Possible cause
—
Picture can not be •Picture has been overwritten or renamed by a
played back
Pressing
computer or other make of camera.
•Picture is displayed in full-screen review. Small 72
pictures can only be created in playback mode.
button when picture •Picture is a movie. Small pictures can only be 72
is displayed full
screen does not
created from photos.
•Picture is already a small picture.
73
create small picture •There is not enough free space on the memo- 73
ry card for a small picture.
Can not zoom in on
•Picture is a movie.
picture during play-
back or review
71
•Picture was created using small picture option.
•Camera is off.
6
•AC adapter kit (available separately) is not 87
properly connected, or battery is dead.
•USB cable not correctly connected, or card not —
properly inserted in card reader, card adapter,
or card slot.
•USB item in setup menu set to PTP when 64
camera connected to computer running Win-
dows 2000 Professional, Windows Millenni-
um Edition (Me), Windows 98 Second Edition
(SE), or Mac OS 9
Nikon View does not
start when camera
connected or memory
card inserted in card
reader or card slot
•Camera is not registered in Device Manager —
(Windows only).
See Nikon View Reference Manual (on CD) for
further information on troubleshooting Nikon
View.
91
Error Messages
The following table lists the error messages and other warnings that appear
in the monitor and how to deal with them.
Display
Problem
Solution
Clock calendar not Set clock calendar to cur- 21–
(Flashes)
set.
rent date and time.
22
WARNING ! !
Turn camera off and re- 16–
Battery exhausted.
BATTERY
EXHAUSTED
place battery.
18
28
Use focus lock to focus on
another subject at same
distance, then recompose
photograph.
AF●
(● flashes red)
Cameracannotfocus.
Use flash, or steady camera
by mounting on tripod,
placing on level surface, or
holding in both hands with
elbows against torso.
Slow shutter speed.
Photosmaybeblurred.
37,
43
Lens is blocked by Rotate lens until message
Please turn the lens to
the shooting position
26
camera body.
is no longer displayed.
Attempt made to
turn camera off or
view pictures during
recording.
Message clears from dis-
play automatically when 29
recording is complete.
WARNING ! !
Please wait for camera
to finish recording
Turn camera off and con-
Camera can not de-
tect memory card.
16–
firm that memory card is
18
NO CARD PRESENT
correctly inserted.
Press multi selector up to
CARD IS NOT
FORMATTED
Memory card has not highlight FORMAT and
been formatted for press to right to format
useinCOOLPIX 3500. card, or turn camera off
and replace card.
16–
18
FORMAT
NO
92
Display
Problem
Solution
•Use approved card.
87
THIS CARD
•Check that connectors —
are clean. If card is dam-
aged, contact retailer or
Nikon representative.
CANNOT BE USED
Error accessing mem-
ory card.
WARNING ! !
This CF card cannot
be read
Camera in
mode: •Reduce image quality or 51,
Insufficient memory size.
to record pictures at •Delete photographs.
52
76
current settings.
•Insert new memory card. 16
Error occurs when
you try to transfer
images to computer: Disconnect camera, delete
Not enough space unwanted photographs 76
on memory card to and try again.
record information
OUT OF MEMORY
needed for transfer.
•Memory card has •Reformat memory card. 62
not been formatted
for use in camera,
or error occurred
while saving photo.
•Camera has run out •Insert new memory card 16,
of file numbers.
IMAGE CANNOT
BE SAVED
or delete pictures.
76
•Camera can not •Small pictures can not be 72–
create small pic- created from small pic- 73
ture.
tures or movies.
•Camera in review mode: 33
half-press shutter button
No pictures on mem-
ory card.
CARD CONTAINS
NO IMAGES
to return to
•Camera in
mode.
mode: se-
6
lect
mode.
93
Display
Problem
Solution
USB cable discon- If error appears in comput-
nected or memory er monitor, click OK to exit
card removed while Nikon View. Turn camera 16–
pictures are being off, reconnect cable or re- 18
transferred to com- place memory card, then
puter.
turn camera on.
COMMUNICATIONS
ERROR
Protocol selected in Turn camera off and dis-
USB menu does not connect USB cable, then
match that used by change USB selection in
computer operating camera setup menu and
system, causing error reconnect camera. If error
64
when
(
) but- reoccurs, use Nikon View
ton is pressed to
transfer pictures.
button to transfer
pictures.
File created by com-
puter or different
make of camera.
Delete file or reformat 76,
FILE CONTAINS
NO IMAGE DATA
memory card.
62
No pictures marked
for transfer when
Disconnect camera and
mark at least one picture
for transfer before con-
necting camera again.
33,
69,
81
NO IMAGES ARE
MARKED FOR
TRANSFER
(
) button
pressed to copy pic-
tures to computer.
Error occurred when Check that the camera is
pictures were trans- properly connected and 24
ferred to computer. battery fully charged.
TRANSFER
ERROR
Turn camera off, unplug
optional AC adapter kit (if
Error has occurred in using) or remove and re-in-
camera’s internal cir- sert battery, and turn cam-
16–
18
SYSTEM ERROR
cuitry.
era on. If error persists,
contact retailer or Nikon
representative.
94
Specifications
Type
E3500 digital camera
Effective pixels
3.2 million
1
CCD
2.7˝ high-density CCD; total pixels: 3.34 million
/
Image size (pixels)
• 2048 × 1536 (2048)
• 1024 × 768 (1024)
• 640 × 480 (640)
• 1600 × 1200 (1600)
• 1280 × 960 (1280)
Lens
3 × Zoom Nikkor
Focal length
F = 5.6 – 16.8 mm (35-mm [135] camera format equiv-
alent: 37 – 111 mm)
f/-number
f/2.7 – f/4.8
Construction
Digital zoom
Seven elements in six groups
4.0 ×
Autofocus (AF)
Focus range
Contrast-detect through-the-lens (TTL) AF
30 cm (1´) – ∞; 4 cm (1.6˝) – ∞ in Close Up mode
Five-area multi AF with auto AF-area selection
Focus-area selection
Monitor
1.5˝, 110,000-dot, low temperature polysilicon TFT LCD
with brightness adjustment
Frame coverage (
mode) Approximately 97% vertical and 97% horizontal
A Note on Electronically-Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor
and the camera may stop functioning. In most cases, this phenomenon is
caused by a strong external static charge. Turn the camera off, remove and
replace the battery, and turn the camera on again, or, if you are using an AC
adapter (available separately), disconnect and reconnect the adapter and turn
the camera on again. In the event of continued malfunction, contact your
retailer or Nikon representative. Note that disconnecting the power source as
described above may result in loss of any data not recorded to the memory
card at the time the problem occurred. Data already recorded to the memory
card will not be affected.
95
Storage
Media
Type I CompactFlash™ (CF) cards
File system
Compliant with Design rule for Camera File systems
(DCF), Exif 2.2, and Digital Print Order Format (DPOF)
File formats
Compressed: JPEG-baseline-compliant
Movies: QuickTime
Exposure
Metering
256-segment matrix metering
Exposure control
Programmed auto exposure with exposure compensa-
tion (–2.0 – +2.0 EV in steps of 1/3 EV)
Range
W: 1.9 – 16.9 EV
T: 3.5 – 18.6 EV
Shutter
Speed
Mechanical and charge-coupled electronic shutter
2 – 1/3000
s
Aperture
Range
Electronically-controlled preset aperture
Two steps (f/2.7 and f/4.5 [W])
Sensitivity
Approximately equivalent to ISO 50 (auto gain to ISO
200 equivalent)
Self-timer
Ten-second duration
Built-in Speedlight
Range (approx.)
0.4 – 3.0 m (1´4˝ – 9´10˝) (W)
0.4 – 1.7 m (1´4˝ – 5´7˝) (T)
Flash control
Interface
Sensor flash system
USB
Design Rule for Camera File Systems (DCF)
Your camera names pictures according to the Design Rule for Camera File
Systems (DCF), a standard widely used in the digital camera industry to ensure
compatibility among different makes of camera.
96
Power sources
• One rechargeable Nikon EN-EL2 lithium-ion battery
(supplied)
• EH-60/EH-60S AC adapter kit (available separately)*
*EH-60S available only in USA.
Battery life (EN-EL2)
Approximately 80 minutes with fully-charged battery
(measured at room temperature [20 °C/68 °F] under
standard Nikon test conditions: zoom adjusted with
each shot, flash used in approximately one third of pho-
tographs, image size set to 2048, image quality set to
NORMAL)
Dimensions (W × H × D)
114 × 59.5 × 31.5 mm (4.5˝ × 2.3˝ × 1.2˝)
Weight
Approximately 175 g (6.2 oz) without battery or mem-
ory card
Operating Environment
Temperature
0 – 40 °C (32 – 104 °F)
Humidity
Less than 85% (no condensation)
97
Index
Design rule for Camera File sys-
tems, 69, 96
Symbols
B
2048, 1600, 1280, 1024, 640, Back Light, 40
Digital Print Order Format, 78
DISP. See monitor, indicators;
photo information
52
BASIC, 51
(shooting) mode, 6
(playback) mode, 6
button, 4, 33, 34, 68, 70
button, 4, 33, 69, 71
button, 5, 43
Battery, 16–18, 24
life, 86, 97
DPOF. See digital Print Order
Format
storing, 86
Beach/Snow, 38
BEST SHOT SELECTOR, 57
Brightness, 62
E
button, 5, 33, 34, 68, 70
Error messages, 92–94
EXP +/–, 53
button, 5, 33, 34, 69, 70, BSS. See BEST SHOT SELECTOR
82
Exposure compensation, 6, 53
C
. See shooting mode; mov-
Camera strap, 16
ies
F
CF card. See memory card
CF Card Format, 62
Clock-calendar, 18, 21–22
Close Up, 40
, See self timer
, 6, 24
FINE, 51
Fireworks Show, 39
Flash, 43
, 6, 22
, 6, 37, 44
Flash mode, 43
CompactFlash™ card. See
,
,
,
,
,
,
,
,
Flash-ready lamp, 28, 43
Focus. See autofocus
Focus indicator, 6, 28
Formatting. See memory card
memory card
,
,
,
,
,
, 37–
Compression. See image qual-
ity
40
AUTO,
, 6, 53
,
, 43
Computer. See Nikon View;
transfer
I
A,
,
,
,
,
, 54
, 58
CONTINUOUS, 56
Copy, 40
,
,
, 56
,
Image quality, 6, 51
Image size, 6, 52
,
,
,
Copying images. See transfer
,
,
, 78, 80, 81
IMAGE SHARPENING, 58
ISO. See sensitivity
D
A
Date, 21–22
J
.
See shooting mode,
imprinting, 79
auto
JPEG. See image quality
DCF. See Design rule for Cam-
era File systems
Accessories. See optional ac-
cessories
L
Delete, 76–77
Landscape, 38
AF●. See focus indicator
Autofocus, 28
Deleting images
Language, 19–20, 64
from playback menu, 76–77
in full-frame playback, 68
in quick review, 33
in thumbnail review, 34, 70
Auto Off, 63
Auto Transfer, 81
98
Self-timer, 45
M
P
Sensitivity, 6, 44
.
See shooting mode, Party/Indoor, 37
SET-UP menu, 59
Sharpening. See IMAGE
SHARPENING
manual
Photo information, 7, 33, 69
Picture Transfer Protocol. See
USB.
Mass storage. See USB.
Memory card, 87
approved cards, 87
capacity of, 51
Shooting mode, 6, 42
(auto), 42
Playback, 68. See also quick re-
view
(manual), 42
formatting, 62
full frame, 68
movie, 42
insertion and removal of, 16–
18
movie, 74
Shutter-release button, 28–29
Shutter release delay. See self-
timer
thumbnail, 70
MENU button, 4, 49, 60, 75
Menus, 9–14
zoom, 71
PLAY BACK menu, 75
Portrait, 37
Size. See image size
SMALL PIC. button, 4, 72
Small picture, 72
Smear, 27
Mode selector, 5, 6
Monitor, 5, 6–7
Print Set, 78–79
Protect, 80
PTP. See USB.
brightness, 62
indicators, 6–7
Specifications, 95–97
Speedlight. See flash
Strap. See camera strap
Sunset, 39
framing photographs in, 27
MOV. See movies
Movies, 42
Q
Quality. See image quality
button, 4, 31
playing back, 74
recording, 42
Quick review, 32
full screen, 32
T
Multi selector, 5, 8
Museum, 39
T. See zoom, indicator
. See zoom, buttons
Telephoto. See zoom
Thumbnail display, 34, 70
Time and date. See Date
Timer. See self-timer
Transfer, 8, 82
thumbnail, 34
QuickTime. See movies
QVGA. See movies
N
Night Landscape, 39
Night Portrait, 38
Nikon View, i, 82
Noise, 38, 44
R
Red-eye reduction. See flash
mode
Reset All, 66
marking images for, 33, 34,
69, 70, 81, 82
Noise reduction, 38
NORMAL, 51
S
Troubleshooting, 88–94, 95
Number of exposures remain-
ing, 6, 24
Scene, 36
U
mode, 37–40
selection, 36
USB, 64
O
SCENE button, 5
Self-portrait. See monitor; self-
timer
On/off. See mode selector
Optional accessories, 87
99
W
W. See zoom, indicator
. See zoom, buttons
Web resources, 88
White balance, 54
preset, 55
Wide angle. See zoom
Z
Zoom
buttons, 4, 27, 47, 70, 71
digital, 47
indicator, 6, 27, 47
optical, 47
100
|
ProMaster MyMuvi Movie Machine MyMuvi Movie Machine User Manual
Pioneer Car Video System AVH P5100DVD User Manual
Phoenix Gold Car Speaker 12D2 User Manual
PHL Audio 1660 User Manual
Panasonic Lumix Mirrorless Camera DMC GF3XK User Manual
Nikon AF S VR Zoom Nikkor 70300mmf4556GEDIFAFS User Manual
MB QUART FSB213 User Manual
Makita DP4003 User Manual
Lenovo THINKPAD T40 User Manual
Lenmar Enterprises Lenmar N Verter NVC450D User Manual