LG Electronics SH72PZ W User Manual

HT762PZ-A0_DCANLL_ENG_1791

http://www.lg.ca

DVD RECEIVER

OWNER’S MANUAL

MODEL: HT762PZ

HT762PZ

SH72PZ-F

SH72PZ-S

SH72PZ-C

SH72PZ-W

Before connecting, operating or adjusting this product,

please read this instruction booklet carefully and

completely.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S

MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE

REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following

procedures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and

operating instructions should be read before the

product is operated.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

2. Keep these instructions. - The safety, operating

and use instructions should be retained for future

reference.

11. Only use attachments/accessories specified by

the manufacturer.

3. Heed all warnings. - All warnings on the product

and in the operating instructions should be adhered

to.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this apparatus near water. – For

example: near a bath tub, wash bowl, kitchen sink,

laundry tub, in a wet basement; or near a swimming

pool; and other areas located near water.

6. Clean only with dry cloth. – Unplug this product

from the wall outlet before cleaning. Do not use

liquid cleaners.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over-heating. The

openings should never be blocked by placing the

product on a bed, sofa, rug or other similar surface.

This product should not be placed in a built-in

installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Introduction

Maintenance and Service

Maintenance and Service . . . . . . . . . . . . . . . . .4

Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Front Panel/Rear Panel . . . . . . . . . . . . . . . . . . .6

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .7

Refer to the information in this chapter before

contacting a service technician.

Handling the unit

Installation and Setup

TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .8

Optional Equipment Connection . . . . . . . . . . . .9

USB connection . . . . . . . . . . . . . . . . . . . . . . .9

AUX IN connection . . . . . . . . . . . . . . . . . . . . .9

OPTICAL IN connection . . . . . . . . . . . . . . . . .9

AUDIO IN connection . . . . . . . . . . . . . . . . . . .9

Antenna Connection . . . . . . . . . . . . . . . . . . . . .9

Assembling the speaker stand to the speaker 10

Speaker System Connection . . . . . . . . . . . . . .10

HDMI Connection . . . . . . . . . . . . . . . . . . . . . .11

Displaying Disc Information on-screen . . . . . .12

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .12

General Operation . . . . . . . . . . . . . . . . . . . .12-14

LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .12

DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .13

LOCK (Parental Control) . . . . . . . . . . . . . . . .14

OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

When shipping the unit

Please save the original shipping carton and packing

materials. If you need to ship the unit, for maximum

protection, re-pack the unit as it was originally packed

at the factory.

Keeping the exterior surfaces clean

ꢀ

Do not use volatile liquids such as insecticide spray

near the unit.

ꢀ

Do not leave rubber or plastic products in contact

with the unit for a long period of time. since they

leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth lightly

moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine,

or thinner, as these might damage the surface of the

unit.

Operation

General features . . . . . . . . . . . . . . . . . . . . . . .15

Additional features . . . . . . . . . . . . . . . . . . . . .16

Playing an Audio CD or MP3/WMA file . . . . . .17

Programmed Playback . . . . . . . . . . . . . . . . . .17

Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .18

Playing a DivX Movie file . . . . . . . . . . . . . . . .19

DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .20

Presetting the Radio Stations . . . . . . . . . . . . .21

Listening to the Radio . . . . . . . . . . . . . . . . . . .21

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .22

Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Selecting input source . . . . . . . . . . . . . . . . . . .22

XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .22

VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .22

Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Controlling your TV with the Suppllied

Maintaining the Unit

The DVD/CD Receiver is a high-tech, precision

device. If the optical pick-up lens and disc drive parts

are dirty or worn, the picture quality could be

diminished.

Depending on the operating environment, regular

inspection and maintenance are recommended after

every 1,000 hours of use.

For details, please contact your nearest authorized

service center.

Remote Control . . . . . . . . . . . . . . . . . . . . . . . .23

Controlling other TVs with the Supplied

Remote Control . . . . . . . . . . . . . . . . . . . . . .23-24

What is SIMPLINK?

Some functions of this unit are controlled by TV’s

remote control when this unit and LG TV with

SIMPLINK are connected through HDMI

connection.

Reference

Language Codes . . . . . . . . . . . . . . . . . . . . . . .25

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Troubleshooting . . . . . . . . . . . . . . . . . . . . .26-27

•

Controllable functions by LG TV’s remote control;

Play, Pause, Scan, Skip, Stop, Power Off, etc.

•

Refer to the TV owner’s manual for the details of

SIMPLINK function.

Specifications . . . . . . . . . . . . . . . . . . . . . . . . .28

•

LG TV with SIMPLINK function has the logo as

shown above.

Use a higher version cable than 1.2A HDMI

cable.

Introduction

Types of Playable Discs

Before use

DVD

To ensure proper use of this product, please read this

owner’s manual carefully and retain it for future

reference.

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

This manual provides information on the operation

and maintenance of your DVD/CD Receiver. Should

the unit require service, contact an authorized service

location.

Audio CD

(8 cm / 12 cm disc)

In addition, this unit can play a DVD R, DVD RW,

SVCD and CD-R or CD-RW that contains audio titles,

MP3, WMA, JPEG or DivX files.

About the

Symbol Display

“

” may appear on your TV display during

Notes:

operation and indicates that the function explained in

this owner’s manual is not available on that specific

DVD video disc.

ꢀ

Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD-RW,

DVD+RW) disc itself, some CD-R/RW (or DVD-RW,

DVD+RW) discs may not be played on the unit.

Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal). It may result in malfunctions.

ꢀ

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Regional Code

Indicates tips and hints for making the task easier.

This unit has a regional code printed on the rear of the

unit. This unit can play only DVD discs labelled as the

same as the rear of the unit or “ALL”.

A section whose title has one of the following symbols

is applicable only to the disc represented by the

symbol.

Notes on Regional Codes

ꢀ

Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your DVD player’s regional

code or the disc cannot play.

DVD

VCD

Video CDs

ACD

Audio CDs

ꢀ

If you try to play a DVD with a different regional

code from your player, the message “Check

Regional Code” appears on the TV screen.

MP3

MP3 files

WMA

WMA files

JPEG

DivX

JPEG files

DivX files

Remote Control Operation Range

Point the remote control at the remote sensor and press the

buttons.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories. Confidential Unpublished

reserved.

ꢀ Distance: About 23 ft (7 m) from the front of the remote

sensor

ꢀ Angle: About 30° in each direction in front of the remote

sensor

Remote control battery installation

Manufactured under license from Digital Theater Systems,

Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;

5,978,762; 6,226,616; 6,487,535 and other U.S. and world-

wide patents issued and pending. "DTS" and "DTS Digital

Surround” are registered trademarks of Digital Theater

Remove the battery cover on the rear of

the remote control, and insert two R06

(size AA) batteries with

aligned correctly.

and

Front Panel/Rear Panel

POWER

OPEN/CLOSE button

DISPLAY Window

DISC Tray

VOLUME controller

TUNING(-/+)/SKIP/

SEARCH(./>)

AUDIO IN connector

STOP (x)

PAUSE ( )/

MONO/STEREO (ST.)

USB port

Connect to a USB port of a memory

device (USB memory etc.)

FUNC.(-)/PLAY(B)

Press and hold down this button

about 3 seconds, then press

repeatedly to select other function.

Remote sensor

Power Cord

SPEAKER connectors

FM Antenna connector

AUX AUDIO Input

(L/R) connector

Cooling fan

INPUT

AUX

MONITOR

HDMI OUT

COMPONENT VIDEO (PROGRESSIVE SCAN)

OUT PUT

OPTICAL IN connector

AM Loop Antenna connectors

MONITOR OUT connector

COMPONENT VIDEO OUT terminals

Connect to a TV with Y P^BPR inputs.

HDMI OUT

HDMI output providing a high quality interface for digital audio and video.

ꢀ Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause

permanent damage to the unit.

ꢀ Wireless transmitter receiver kit not supplied. We urge you to purchase such a kit to avoid

cumbersome wires running front to back on the floor.

Remote Control

OPEN/CLOSE (Z)

POWER

TUNER

Opens and closes the disc tray.

DVD

Selects the output source (CD/DVD).

Selects the System’s tuner (FM, AM

bands).

TUNER

AUX

OPEN/CLOSE

POWER

DIMMER

PROG./MEMO.

DVD

AUX

Accesses or removes Program menu.

Enter a radio station’s frequency into

the tuner.

Selects input source.

USB

PROG./MEMO.

USB

AUDIO

SOUND

S-TITLE

CLEAR

Plays the multimedia files.

S-TITLE

Selects a subtitle language (DVD).

DIMMER

Changes brightness of the display

window on the front panel during in

power-on status.

REPEAT

REPEAT A-B

MARKER

CLEAR

Removes a track number on the

program menu or a mark on the

MARKER SEARCH menu.

SCAN

TITLE

SKIP

SCAN +

PAUSE/STEP

AUDIO

Selects an audio language (DVD) or an

audio channel (CD).

STOP

PLAY

MARKER

Marks a point during playback.

ZOOM

DISPLAY

RETURN

SOUND

Selects the sound mode.

Displays MARKER SEARCH menu.

SETUP

REPEAT

Repeats chapter, track, title, all.

SCAN/SLOW(bb/BB)

Searches backward or forward.

Reverse/Forward slow playback.

REPEAT A-B

ENTER

Repeats sequence.

SKIP (./>)

Moves to the previous or next chapter

or track.

Accesses the menu on a DVD disc.

ZOOM

Enlargres video image.

TITLE

Displays the disc’s Title menu, if

available.

SLEEP

MUTE

VOL

SETUP

STOP (x), PLAY (B)

PAUSE/STEP (X)

VSM

Accesses or removes setup menu.

DISPLAY

Accesses On-Screen display.

RETURN

Removes the menu.

XTS pro

Supplies more natural and realistic

sound.

b/B/v/V (left/right/up/down)

Selects an option in the menu.

Supplies great sound effect.

RESOL .

HDMI

SLEEP

Sets the System to turn off

automatically at a specified time.

ENTER

Acknowledges the menu selection.

PRESET (-/+)

Selects programme of Radio.

MUTE

Turns the sound on and off

temporarily.

TUN. (-/+)

Tunes in the desired radio station.

POWER

INPUT

CHANNEL

VOLUME

VOLUME (-/+)

Adjusts speaker volume.

0-9 numerical buttons

Selects a service, program number

directly or selects numbered options in

a menu.

RESOL.

Changes the resolution depending on

your TV.

HDMI

TV Control Buttons

Switches the HDMI mode to HDMI

(active) and OFF (inactive).

- POWER: Switches TV ON and OFF.

- CHANNEL v/V: Selects TV’s

channel.

- VOLUME +/–: Adjusts TV’s volume.

- INPUT: Selects the TV’s source.

Installation and Setup

TV Connection

Make one of the following connections, depending on

the capabilities of your existing equipment.

Video connection

Connect the MONITOR OUT jack from the DVD/CD

Receiver to the VIDEO IN jack on the TV using the

video cable (V).

Tips:

ꢀ

Depending on your TV and other equipment you

wish to connect, there are various ways you could

connect the DVD/CD Receiver. Use one of the

connections described below.

Component Video connection

Connect the COMPONENT VIDEO OUT jacks from

the DVD/CD Receiver to the corresponding jacks on

the TV using a Y P^BPR cable (C).

Please refer to the manuals of your TV, VCR,

Stereo System or other devices as necessary to

make the best connections.

ꢀ

If your television is a high-definition or “digital

ready” television, you may take advantage of the

DVD/CD Receiver’s progressive scan output for the

highest video resolution.

If your TV does not accept your resolution setting,

abnormal picture appears on the screen. Please

read owner’s manual for TV then set the resolution

that your TV can accept.

Caution:

ꢀ

Make sure the DVD/CD Receiver is connected

directly to the TV. Select the correct AV input on

your TV.

ꢀ

Do not connect your DVD/CD Receiver to the TV

via your VCR. The DVD image could be distorted

by the copy protection system.

Note:

Rear of DVD/CD Receiver

The HDMI mode must be set to OFF for VIDEO OUT

and Component video connections.

INPUT

AUX

MONITOR

HDMI OUT

COMPONENT VIDEO (PROGRESSIVE SCAN)

OUT PUT

VIDEO

INPUT

COMPONENT VIDEO

PROGRESSIVE SCAN INPUT

Rear of TV

Optional Equipment Connection

OPTICAL IN connection (O)

Connect an optical output of DVD Player (or Digital

Device etc) to the OPTICAL IN connector.

Auxiliary device

DVD Player

(or Digital

Device, etc)

OUT

VIDEO

AUDIO (L)

AUDIO IN connection (D)

AUDIO (R)

OPTICAL

OUT

Connect a output of portable device (MP3 or PMP etc)

to the AUDIO input connector.

To AUDIO OUT (L/R)

USB Memory, MP3 Player (or

Memory Card Reader, etc.)

To AV IN AUDIO (L/R)

INPUT

AUX

MONITOR

HDMI OUT

COMPONENT VIDEO (PROGRESSIVE SCAN)

OUT PUT

To AUDIO IN

Rear of DVD/CD Receiver

USB connection (U)

Connect the USB port of USB Memory (or MP3

player, etc.) to the USB port on the front of the unit.

To AUDIO OUT

Portable device

Removing the USB Device from the unit

1. Choose a different function mode or press STOP

(x) twice in a row.

Antenna Connection

Connect the supplied FM/AM antenna for listening to

the radio.

2. Remove the USB device from the unit.

Notes:

ꢀ

Don’t extract the USB device while operating.

Music files (MP3/WMA), image files (JPEG) and

video files can be played.

ꢀ

Connect the AM Loop antenna to the AM antenna

connector.

ꢀ

Connect the FM Wire antenna to the FM antenna

connector.

ꢀ

This unit cannot use a USB HUB.

Recommended Memory Cards.

Compact Flash Card (CFC), Micro Drive (MD), Smart

Media Card (SMC), Memory Stick (MS), Secure Digital

Card (SD), Multimedia Card (MMC), Memory Stick Pro

(MS-Pro)

Notes:

ꢀ

To prevent noise pickup, keep the AM Loop antenna away

from the DVD/CD Receiver and other components.

Be sure to fully extend the FM wire antenna.

After connecting the FM Wire antenna, keep it as

horizontal as possible.

ꢀ

- Compatible with: FAT16, FAT32

- Only use the memory cards recommended.

Devices which require additional program

installation when you have connected the unit to a

computer are not supported.

In case of a USB HDD, make sure to connect an

auxiliary power cord to the USB HDD for proper

operation. Up to four primary partitions of a drive are

supported. If there is an extension partition, it will not

be supported.

ꢀ

AM Loop Antenna

(supplied)

FM Wire Antenna

(supplied)

ꢀ

If the drive of USB device is two or more, a drive

folder is displayed on the screen. If you want to

move to the initial menu after you select a folder,

press RETURN.

Digital cameras and mobile phones are not

supported.

INPUT

AUX

MONITOR

HDMI OUT

COMPONENT VIDEO (PROGRESSIVE SCAN)

OUT PUT

AUX IN connection (A)

Connect a Output of auxiliary device to the AUX

AUDIO Input (L/R) Connector.

Assembling the speaker stand

to the speaker

Speaker System Connection

Connect the speakers using the supplied speaker

wires.

Before connecting the speakers, assemble the

speaker stand to the speaker as illustrated.

To obtain the best possible surround sound, adjust the

speaker parameters (volume, distance, etc.).

1. Fix the post to the

base by rotating the

post. And Draw the

speaker cord through

the hole on the base.

Hole

Post

Front speaker

(Left)

Front speaker

(Right)

Base

2. Draw the speaker

cord through the hole

on the speaker.

Center speaker

Rear speaker

(Left surround)

Rear speaker

(Right surround)

3. Fix the speaker to the

stand by rotating the

speaker. Connect the

speaker cord to the

appropriate terminals

on the speaker.

Subwoofer

Notes:

ꢀ

Be sure to match the speaker wire to the

appropriate terminal on the components: + to + and

– to –. If the cables are reversed, the sound will be

distorted and will lack bass.

ꢀ

If you use front speakers with low maximum input

rating, adjust the volume carefully to avoid

excessive output on the speakers.

Notes:

ꢀ

Do not catch the speaker cord between the

speaker and the post.

ꢀ

Do not drop the speaker when mounting.

Rear of DVD/CD Receiver

HDMI Connection

About HDMI

INPUT

AUX

MONITOR

HDMI (High Definition Multimedia Interface) supports

both video and audio on a single digital connection for an

easy all- digital output to an HDMI or DVI-equipped TV.

HDMI OUT

COMPONENT VIDEO (PROGRESSIVE SCAN)

Connection to an HDMI TV requires an HDMI cable

while connection to a DVI-equipped TV requires a DVI

adapter besides a HDMI cable.

(Not supplied)

HDMI has the capability to support standard,

enhanced, or high-definition video plus standard to

multi-channel surround-sound audio, HDMI features

include uncompressed digital video, a bandwidth of up

to 5 gigabytes per second, one connector (instead of

several cables and connector), and communication

between the AV source and AV devices such as DTVs.

HDMI

HDMI compatible TV

Resolution setting

You can change the resolution for the COMPONENT

VIDEO OUT by pressing RESOL. on the Remote

Control. Available resolution settings are as shown

below.

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI licensing LLC.

OUTPUT

Available Resolution

If you have a HDMI TV or monitor, you can connect

it to this DVD/CD Receiver using a HDMI cable.

CONNECTION

1920 x 1080p

1. Connect the HDMI OUT jack on the DVD/CD

Receiver to the HDMI jack on a HDMI compatible

TV or monitor (H).

HDMI

VIDEO OUT

1920 x 1080i

1280 x 720p

720 x 480p

1920 x 1080i

1280 x 720p

720 x 480p

720 x 480i

2. Set the TV’s source to HDMI (refer to owner’s

manual for TV).

COMPONENT

VIDEO OUT

3. In the stop mode, select HDMI mode by pressing

HDMI. Press RESOL. repeatedly to select the

resolution you wish to change.

MONITOR OUT

720 x 480i

Notes:

ꢀ

The arrow on the cable connector body should face

up for correct alignment with the connector on the

DVD/CD Receiver.

ꢀ

If the picture does not appear on the screen with

the analog video connections, change the

resolution to 480i.

ꢀ

If HDMI cable is not connected, the HDMI button

does not operate.

If there is noise or there are lines

on the screen, please check

the HDMI cable.

ꢀ

For 720p and 1080i resolution on the component

video out, only non-copy protected discs can be

played back. If the disc is copy protected, it will be

displayed at the 480p resolution.

ꢀ

1080i, 1080p, 720p, and 480p does not work with

the analog video connections (MONITOR OUT).

ꢀ

Not all HDCP-compatible

DVI devices will work with

this DVD/CD Receiver.

If TV does not support HDCP, snow noise appears

on the screen, or picture may be vibrated.

The component (Y/PB/PR) will output to black

picture in the RGB mode.

If you change the resolution, the display MENU

(MP3/JPEG/DivX) size is changed.

Tip :

When you use HDMI connection, you can change the

resolution (480p, 720p, 1080i, 1080p) for the HDMI

output by pressing RESOL. on the Remote Control.

If your TV does not accept your resolution setting,

abnormal picture appears on the screen.

Please read owner’s manual for TV, and then set

the resolution that your TV can accept.

Caution:

Changing the resolution when the DVD/CD Receiver

is connected with HDMI connector may result in

malfunctions. To solve the problem, turn off the

DVD/CD Receiver and then turn it on again.

LANGUAGE

Displaying Disc Information

On - screen

LANGUAGE

English

Original

Off

OSD

You can display various information about the disc

loaded on-screen.

Disc Audio

Disc Subtitle

Disc Menu

Original

1. Press DISPLAY to show various playback

information.

The displayed items differ depending on the disc

type or playing status.

Move

Select

2. You can select an item by pressing v / V and

OSD

change or select the setting by pressing b / B.

Select a language for the Setup menu and then on-

screen display.

^ꢀTitle (Track) – Current title (or track) number/

total number of titles (or tracks).

^ꢀChapter – Current chapter number/total number

of chapters.

^ꢀTime – Elapsed playing time.

^ꢀAudio – Selected audio language or channel.

^ꢀSubtitle – Selected subtitle.

^ꢀAngle – Selected angle/total number of angles.

^ꢀSound – Selected sound mode.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

Original – Refers to the original language in which

the disc was recorded.

Other – To select another language, press

numeric buttons and then ENTER to enter the

corresponding 4-digit number according to

language code list on the page 25. If you enter the

wrong language code, press CLEAR.

Note:

If any button is not pressed for a few seconds, the on-

screen display disappears.

Initial Settings

DISPLAY

By using the Setup menu, you can make various

adjustments to items such as picture and sound. You

can also set a language for the subtitles and the

Setup menu, among other things. For details on each

Setup menu item, see the pages 12 to 14.

DISPLAY

TV Aspect

Widescreen

Display Mode

To display and exit the Menu:

Press SETUP to display the menu. A second press of

SETUP will take you back to the initial screen.

Move

Select

To go to the next level:

Press B on the remote control.

TV Aspect

To go back to the previous level:

Press b on the remote control.

4:3 – Select when a standard 4:3 TV is connected.

16:9 – Select when a 16:9 wide TV is connected.

GENERAL OPERATION

Display Mode

1. Press SETUP. The Setup menu appears.

The display Mode setting works only when the TV

Aspect mode is set to “4:3”.

2. Use v / V to select the desired option then press

B to move to the second level. The screen shows

the current setting for the selected item, as well as

alternate setting(s).

Letterbox – Displays a wide picture with bands on

the upper and lower portions of the screen.

Panscan – Automatically displays the wide picture

on the entire screen and cuts off the portions that

do not fit.

3. Use v / V to select the second desired option and

then press B to move to the third level.

4. Use v / V to select the desired setting then press

ENTER to confirm your selection. Some items

require additional steps.

5. Press SETUP or PLAY to exit the Setup menu.

AUDIO

5.1 Speaker Setup

Make the following settings for the built-in 5.1 channel

surround decoder.

Each DVD disc has a variety of audio output options.

Set the receiver’s AUDIO options according to the

type of audio system you use.

1. Press ENTER, and the 5.1 Speaker Setup menu

appears.

AUDIO

5.1 Speaker Setup

Select

DRC

Vocal

Speaker

Size

Front L

HD AV Sync

0 ms

Small

Volume

Distance

Test

Off

Move

Select

Move

Return

Enter

2. Use b / B to select the desired speaker.

Dynamic Range Control (DRC)

3. Adjust options using v / V / b / B buttons.

With the DVD*¹format, you can hear a program’s

soundtrack in the most accurate and realistic

presentation, thanks to digital audio technology.

However, you may wish to compress the dynamic

range of the audio output (the difference between the

loudest sounds and the quietest ones). Then, you may

listen to a movie at a lower volume without losing

clarity of sound. Set DRC to On for this effect.

*1:Dolby Digital only

4. Press ENTER to confirm your selection. Returns to

the previous menu.

Speaker selection

Select a speaker that you want to adjust. [Front

speaker (Front L), Front speaker (Front R), Center

Speaker (Center), Subwoofer (SubWoofer), Rear

speaker (Rear L), Rear speaker (Rear R)]

Note:

Vocal

Certain speaker settings are prohibited by the Dolby

Digital licensing agreement.

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Size

Since the speaker settings are fixed, you cannot

change the settings.

HD AV Sync

When using Digital TV.

Sometimes AV signal can not be transmitted

simultaneously because of later transmission of video

signal compared to audio signal.

Volume

Press b / B to adjust the output level of the selected

speaker. (-5dB ~ 5dB)

Because it takes some time to convert analog video

signal to digital one in the Digital TV.

And It means that you may not enjoy picture on the

screen and sound from speaker at the same time

even though it is one scene.

Distance

Since the speaker settings are fixed, you cannot

change the settings.

Test

In the HD AV Sync menu, you can adjust delay time to

audio signal for simultaneous AV signal transmission

Press b / B to test the signals of each speaker. Adjust

the volume to match the volume of test signals

memorized in the system.

Front Left (Front L) → Center → Front Right (Front R)

→ Rear Right (Rear R) → Rear Left (Rear L) →

SubWoofer

ꢀ

Delay time could be set up with 10msec unit.

(0 ~ 300ms)

ꢀ

Delay time is different according to each TV Brand.

So you need to adjust optimal delay time complying

with your TV.

LOCK (Parental Control)

OTHERS

LOCK

PBC

Rating

Unlock

DivX(R) Registration

Semi Karaoke

Select

Password

Area Code

****

UCSA

Select

Move

Select

Rating

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to

the PBC.

Off: Video CDs with PBC are played in the same

way as Audio CDs.

DivX(R) Registration

We provide you the DivX^®VOD (Video On Demand)

registration code that allows you to rent and purchase

videos based on the DivX^®VOD service. For more

information, visit www.divx.com/vod.

1. Select “DivX(R) Registration” option and then

press B.

Blocks playback of rated DVDs based on their

contents. Not all discs are rated.

1. Select “Rating” on the LOCK menu then press B.

2. To access the LOCK options, you must input the

password you have created. If you have not yet

entered a password, you are prompted to do so.

Input a password and press ENTER. Enter it again

and press ENTER to verify. If you make a mistake

before pressing ENTER, press CLEAR.

3. Select a rating from 1 to 8 using the v / V buttons.

Rating 1-8: Rating one (1) has the most restrictions

and rating eight (8) is the least restrictive.

Unlock: If you select unlock, parental control is

2. Press ENTER while “Select” is selected and the

not active and the disc plays in full.

registration code will appear.

Use the registration code to purchase or rent the

videos from DivX^®VOD service at

4. Press ENTER to confirm your rating selection, then

press SETUP to exit the menu.

www.divx.com/vod. Follow the instructions and

download the video onto a disc for playback on

this unit.

Password

You can enter or change password.

1. Select Password on the LOCK menu and then

press B.

3. Press ENTER to exit.

2. Follow step 2 as shown above (Rating).

To change the password, press ENTER when the

“Change” option is highlighted. Input a password

and press ENTER. Enter it again and press

ENTER to verify.

Note:

All the downloaded videos from DivX^®VOD can only

be played back on this unit.

3. Press SETUP to exit the menu.

If you forget your password

If you forget your password, you can clear it using the

following steps:

1. Press SETUP to display the Setup menu.

2. Input the 6-digit number “210499” and press

ENTER. The password is cleared.

Area Code

Enter the code of the area whose standards were

used to rate the DVD video disc, based on the list on

page 25.

1. Select “Area Code” on the LOCK menu then

press B.

2. Follow step 2 as shown in the rating section.

3. Select the first character using v / V buttons.

4. Press B and select the second character using

v / V buttons.

5. Press ENTER to confirm your Area code selection.

Operation

General features

Buttons

Operations

Discs

ALL

Z (OPEN / CLOSE)

X (PAUSE)

Opens or closes the disc tray.

During playback, press X to pause playback.

Press X repeatedly to play Frame-by-Frame.

ALL

DVD

VCD

DivX

SKIP (. / >)

During playback, press SKIP (. or >) to go to the next

chapter/track or to return to the beginning of the current

chapter/track.

ALL

Press SKIP . twice briefly to step back to the previous

chapter/track.

SCAN (m / M)

During playback, press SCAN (m or M) repeatedly to

select the required scan speed.

DVD : bb, bbb, bbbb, bbbbb, bbbbbb or

BB, BBB, BBBB, BBBBB, BBBBBB

DVD

ACD

VCD

MP3

DivX

WMA

DivX disc, Video CD : bb, bbb, bbbb, bbbbb or

BB, BBB, BBBB, BBBBB

WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)

REPEAT

REPEAT A-B

ZOOM

During playback, press REPEAT repeatedly to select a

desired repeat mode.

DVD Video discs: Chapter/Title/Off

ALL

DVD

Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off

During playback, press REPEAT A-B to select a point A and

a point B and repeats a sequence from point A (Starting

point) to point B (End point).

VCD

Press REPEAT A-B to exit.

During playback or in the pause mode, press ZOOM to

enlarge the video image (3 steps).

You can move through the zoomed picture using b B v V

buttons.

TITLE

If the current DVD title has a menu, the title menu appears

on the screen. Otherwise, the disc menu may appear.

The disc menu appears on the screen.

DVD

DivX

(SUBTITLE)

During playback, press S-TITLE repeatedly to select a

desired subtitle language.

DVD

VCD

DVD

(AUDIO language) During playback, press AUDIO repeatedly to hear a different

audio language or audio track.

(AUDIO channel) Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT or RIGHT).

In the pause mode, press SCAN (m or M) to select the

required speed.

VCD

SLOW

DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)

Video CD : T (1/2, 1/4, 1/8, 1/16)

Screen Saver

Notes on general features:

ꢀ

Zoom may not work on some DVDs.

The screen saver appears when you leave the unit in

Stop mode for about five minutes.

ꢀ

The A-B repeat function is available only in the

current title.

Last Scene Memory DVD

This receiver memorizes the last scene from the last

disc that is viewed. The last scene remains in the

memory even if you remove the disc from the receiver

or switch off the receiver. If you load a disc that has

the scene memorized, the scene is automatically

recalled.

Additional features

1.5 times speed playback

DVD

VCD

ACD

MP3

WMA

You can play at 1.5 times speed.

The 1.5 speed allows you to watch the pictures and

listen to the sound quicker than playing at a normal

speed on the disc.

Note:

This receiver does not memorize the scene of a disc if you

switch off the receiver before commencing to play the disc.

1. During playback, press PLAY(B) to play at 1.5

times speed. “BX1.5” appears on the screen.

2. Press PLAY(B) again to exit.

Time Search DVD

VCD

DivX

To start playing at any chosen time on the disc:

1. Press DISPLAY during playback.

2. Press v / V to select the time clock icon and

“--:--:--” appears.

3. Input the required start time in hours, minutes, and

seconds from left to right. If you enter the wrong

numbers, press CLEAR to remove the numbers

you entered. Then input the correct numbers.

4. Press ENTER to confirm. Playback starts from the

selected time.

Marker Search DVD

To enter a Marker

VCD

DivX

You can start playback from up to nine memorized

points. To enter a marker, press MARKER at the

desired point on the disc. The Marker icon appears on

the TV screen briefly. Repeat to enter up to nine

markers.

To Recall or Clear a Marked Scene

1. During disc playback, press SEARCH. The marker

search menu appears on the screen.

2. Within 10 seconds, press b / B to select a marker

number that you want to recall or clear.

3. Press ENTER and playback starts from the

marked scene. Or press CLEAR and the marker

number is erased from the list.

4. You can play any marker by inputting its number

on the marker search menu.

Playing an Audio CD or

MP3/WMA file

Programmed Playback

The program function enables you to store your

favorite tracks from any disc in the receiver memory. A

program can contain 300 tracks.

This unit can play Audio CDs or MP3/WMA files.

MP3/ WMA/ Audio CD

Once you insert a CD with MP3/WMA files or Audio,

a menu appears on the TV screen.

1. Insert a disc.

Audio CD and MP3/WMA Discs:

2. Select a track on the “List” and then press PROG.

Press v / V to select a track/file and then press PLAY

or ENTER, and playback starts. You can use variable

playback functions. Refer to the page 15.

or select “

(Add)” icon and then press ENTER

to place the selected track on the “Program” list.

Repeat to place additional tracks on the list.

ID3 TAG

When playing a file containing information such as

track titles, you can see the information by pressing

DISPLAY. (Song, Artist, Album, Genre, Comment)

Note:

You can add all tracks in the disc. Select “

then press ENTER.

Add All)” icon

(

3. Select the track you want to start playing on the

“Program” list. Press MENU to move to the next

page.

Tips:

ꢀ

Press MENU to move to the next page.

On a CD with MP3/WMA and JPEG, you can

switch MP3/WMA and JPEG. Press TITLE, and

MUSIC or PHOTO top of the menu is highlighted.

4. Press PLAY or ENTER to start. Playback begins in

the order in which you programmed the tracks.

Playback stops after all of the tracks on the

“Program” list have played once.

MP3 / WMA disc compatibility with this player is limited

as follows:

•

Sampling frequency: within 32 - 48 kHz (MP3),

within 24 - 48kHz (WMA)

5. To resume normal playback from programmed

playback, select a track of AUDIO CD (or

MP3/WMA) list and then press PLAY.

•

Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

The DVD/CD Receiver cannot read an MP3/WMA file

that has a file extension other than “.mp3” / “.wma”.

CD-R physical format should be ISO 9660

If you record MP3 / WMA files using software that cannot

create a file system (eg. Direct-CD) it is impossible to

playback MP3 / WMA files.We recommend that you use

Easy-CD Creator, which creates an ISO 9660 file

system.

File names should have a maximum of 8 letters and

must incorporate an .mp3 or .wma extension.

They should not contain special letters such as / ? * : “

< > l etc.

•

Repeat Programmed Tracks

1. Press REPEAT when playing a disc. The repeat

icon appears.

2. Press REPEAT to select a desired repeat mode.

• TRACK: repeats the current track

• ALL: repeats all the tracks on programmed list.

• Off (No display): does not play repeatedly.

•

Erasing a Track from “Program” List

The total number of files on the disc should be less than

999.

1. Use v V to select the track that you wish to erase

from the Program list.

This DVD/CD Receiver requires discs and recordings to

meet certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are

automatically set to these standards. There are many

different types of recordable disc formats (including CD-R

containing MP3 or WMA files) and these require certain

pre-existing conditions (see above) to ensure compatible

playback.

2. Press CLEAR. Alternatively, select “

(Delete)”

icon then press ENTER to place the selected track

on the Program list. Repeat to erase additional

tracks on the list.

Erasing the Complete Program List

Customers should note that permission is required in

order to download MP3 / WMA files and music from the

Internet. Our company has no right to grant such

permission. Permission should always be sought from

the copyright owner.

Use v / V to select “

ENTER.

(Del all)” and then press

Note:

The programs are also cleared when the disc is removed.

JPEG

JPEG disc compatibility with this player is

limited as follows:

Viewing a JPEG file

This unit can play discs with JPEG files.

Before playing JPEG recordings, read the notes on

JPEG Recordings on the right.

• Depending upon the size and the number of

JPEG files, it could take a long time for the

DVD/CD Receiver to read the disc’s contents. If

you don’t see an on-screen display after several

minutes, some of the files may be too large —

reduce the resolution of the JPEG files to less

than 2M pixels as 2760 x 2048 pixels and burn

another disc.

1. Insert a disc and close the tray.

The PHOTO menu appears on the TV screen.

PHOTO

List

Preview

JPEG Folder

• The total number of files and folders on the disc

should be less than 999.

• Some discs may not operate due to a different

recording format or the condition of disc.

2. Press v / V to select a folder, and then press

ENTER. A list of files in the folder appears.

If you are in a file list and want to return to the

previous Folder list, use the v / V buttons on the

• Ensure that all the selected files have the “.jpg”

extensions when copying into the CD layout.

• If the files have “.jpe” or “.jpeg” extensions,

please rename them as “.jpg” file.

remote control to highlight

and press ENTER.

• File names without “.jpg” extension will not be

able to be read by this DVD/CD Receiver. Even

though the files are shown as JPEG image files in

Windows Explorer.

3. If you want to view a particular file, press v / V to

highlight a file and press ENTER or PLAY. While

viewing a file, you can press STOP to move to the

previous menu (JPEG menu).

Tips:

ꢀ

There are four Slide Speed options

> (Slow), >> (Normal), >>> (Fast) and II (off).

Use v /V /b /B to highlight the Speed. Then, use b / B

to select the option you want to use and then press

ENTER.

ꢀ

If you set Speed option to Off, the slide is not active.

Slide Show

Use v V b B to highlight the

(Slide Show) then

press ENTER.

Still Picture

1. Press PAUSE/STEP during the slide show.

The DVD/CD Receiver will now go into the PAUSE

mode.

2. To return to the slide show, press PLAY or press

PAUSE/STEP again.

Moving to another File

Press SKIP (. or >) once during viewing a

picture to advance to the next or previous file.

Rotating the picture

Press v V b B during showing a picture to rotate the

picture clockwise or counter-clockwise.

Playing a DivX Movie file

Using this DVD/CD Receiver you can play DivX disc.

DivX disc compatibility with this player is limited

as follows:

• Available resolution size of the DivX file is under

800x600 (W x H) pixel.

1. Insert a disc and close the tray. The MOVIE menu

appears on the TV screen.

• The file name of the DivX subtitle is available by

45 characters.

MOVIE

0:00:00

List

Movie Folder

• If there is impossible code to express in the DivX

file, it may be displayed as " _ " mark on the

display.

• If the number of the screen frame is over 30

per 1 second, this unit may not operate

normally.

2. Press v / V to select a folder and then press

ENTER. A list of files in the folder appears. If you

are in a file list and want to return to the Folder list,

use the v / V buttons on the remote control to

• If the video and audio structure of recorded

files are not interleaved, either video or audio

is outputted.

highlight

and press ENTER.

3. If you want to view a particular file, press

Playable DivX file

v / V to highlight a file and press ENTER or PLAY.

• ".avi ", ".mpg ", ".mpeg ", ".divx"

4. Press STOP to exit.

Playable Subtitle format

• SubRip(*.srt/*.txt)

SAMI(*.smi)

SubStation Alpha(*.ssa/*.txt)

MicroDVD(*.sub/*.txt)

SubViewer 2.0(*.sub/*.txt)

VobSub(*.sub)

Notice for displaying the Divx subtitle

If the subtitle does not display properly during playback,

press and hold S-TITLE for about 3 seconds then press

S-TITLE to select another language code until the

subtitle is displayed properly

Tips:

Playable Codec format

• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",

"MP43 ", "3IVX ".

ꢀ Press MENU to move to the next page.

ꢀ On a CD with MP3/WMA, JPEG and MOVIE file,

you can switch MUSIC, PHOTO and MOVIE menu.

Press TITLE, and MUSIC, PHOTO and MOVIE

word on top of the menu is highlighted.

Playable Audio format

"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".

• Sampling frequency: within 32 - 48 kHz (MP3),

within 24 - 48kHz (WMA)

• Bit rate: within 32 - 320kbps (MP3),

40 - 192kbps (WMA)

Notes:

ꢀ Be sure to select “SUBTITLE ON” mode by

pressing the subtitle file every time before playing a

DivX file .

ꢀ When the subtile has more than two languages in

the file, original subtile is only available.

ꢀ You can not adjust sound mode and VIRTUAL

sound during the DivX file playing.

DVD Audio Discs

Moving to another GROUP

Some DVD Audio discs divide content into different

groups. Your player enables you to quickly access

different groups during playback via the on-screen

display.

DVD Audio is a new disc format building on the

success of DVD to provide high quality,

uncompressed, multi-channel audio for a new

experience in audio quality. A DVD Audio disc can be

identified by the DVD audio logo on the disc jacket or

on the disc itself.

1. Press DISPLAY during playback on in stop mode.

2. Press 3/4 to select Group icon.

DVD Audio can provide higher quality stereo than

Audio CDs with a sampling rate of up to 192kHz

(compared to 44.1kHz for CDs). DVD Audio digital

sound can be delivered with up to 24 bits of data

(compared to 16 bits for a standard CD).

3. Press 1/2 or the numbered buttons (0-9) to select

a group number.

Note:

Sometimes the author of the disc creates hidden

content that can only be accessed by entering a

password. If the lock icon appears on the TV screen,

enter the password (sometimes you’ll find it on the

disc’s jacket cover or on a web site). This password

control isn’t dictated by your DVD/CD Receiver — it is

a function of the disc.

A typical DVD Audio disc contains up to seven times

the data capacity of a CD. This additional space is

used for music, either Advanced Resolution multi-

channel sound quality that is closer to the artist’s

master recording or for longer recordings. Many DVD

Audio discs contain on-screen text, such as artist

biographies, playlists, or lyrics. Some DVD Audio

discs contain photo galleries or video clips.

Since the authoring of DVD Audio Discs varies, some

of the on-screen display choices might not be

available for the disc you’re playing.

Viewing another PAGE

Since DVD Audio discs can hold a lot of content, there

are various ways to see what’s available on the disc.

1. Press DISPLAY during playback.

2. Press 3/4 to select Page icon.

3. Press 1/2 to select a page number.

What appears on the screen will vary from disc to

disc because the information available depends

upon the way the disc was created.

Note:

Since the authoring of DVD Audio Discs varies, some

of the on-screen display choices might not be

available for the disc you’re playing.

Presetting the Radio Stations

Listening to the Radio

You can preset 50 stations for FM and AM (MW).

Before tuning, make sure that you have turned down

the volume.

Preset radio stations in the DVD/CD Receiver’s

memory first (see “Presetting radio stations” on the

left).

1. Press TUNER on the remote control until FM or

AM (MW) appears in the display window.

1. Press TUNER until FM or AM (MW) appears in the

display window.

The last received station is tuned in.

2. And then every time you press TUNER, FM and

AM (MW) changes alternately.

2. Press PRESET (-/+) repeatedly on the remote

control to select the preset station you want.

Each time you press the button, the DVD/CD Receiver

tunes in one preset station at a time.

3. Press and hold TUN.(-/+) for about two seconds

until the frequency indication starts to change,

then release.

Scanning stops when the DVD/CD Receiver tunes in a

station.

3. Adjust the volume by rotating VOLUME on the

front panel or by pressing VOLUME + or - on the

remote control repeatedly.

4. Press PROG./MEMO. on the remote control.

A preset number will flash in the display window.

To turn off the radio

Press POWER to turn the DVD/CD Receiver off or

select another function mode (DVD/CD, AUX, USB).

5. Press PRESET (-/+) on the remote control to

select the preset number you want.

To listen to non-preset radio stations

^ꢀUse manual or automatic tuning.

6. Press PROG./MEMO. on the remote control again.

The station is stored.

^ꢀFor manual tuning, press TUN.(-/+) repeatedly.

7. Repeat steps 3 to 6 to store other stations.

^ꢀFor automatic tuning, press and hold TUN.(-/+) for

about two seconds on the front panel.

To tune in a station with a weak signal

Press TUN.(-/+) repeatedly in step 3 to tune in the

station manually.

To select a preset radio station directly

You can use the number buttons on the remote

control to select a preset radio station directly.

For example, to listen to the preset station 4, press 4

on the remote control. To listen to the preset station

19, press 1 and then 9 (within 3 seconds).

To clear all the stored stations

Press and hold PROG./MEMO. for about two seconds

and “ERASE ALL” appears in the display window and

then press PROG./MEMO. again, the stations are

cleared.

For your reference

^ꢀIf an FM program is noisy

Press MONO/ST. on the front panel to make

“STEREO” disappear in the display window. There

will be no stereo effect, but the reception will

improve. Press the button again to restore the

stereo effect.

^ꢀIf you have accidentally entered into the "ERASE

ALL" mode and you do not wish to clear the

memory, do not press any key. After a few seconds,

"ERASE ALL" will go off by itself and change to

normal mode.

Note:

^ꢀTo improve reception

Reorient the supplied antennas.

If all stations have already been entered, the FULL

message will appear in the display window for a

moment and then a preset number will flash.

To change the preset number, follow steps 5-6 as

above.

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off

automatically at a specified time.

XTS/XTS pro

Each time you press XTS pro the setting changes in

the following order.

1. Press SLEEP to set the desired sleep time.

The SLEEP indicator and the sleep time appears in the

display window.

XTS ON → NORMAL → XTS-P ON...

ꢀ

XTS-P ON

The unique sound quality of the LG Technology

creates the optimum sound for you to play the

perfect playback of the original sound and to feel

the living sound source.

2. Each time you press SLEEP the setting

changes in the following order.

SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 →

40 → 30 → 20 →10 →OFF (No display)

XTS ON

When playing a movie with weak bass relative to

the general music, it forces sound to the woofer.

In the mode of 2 CH BYPASS, It creates the high

display effect by playing the sound source via the

rear speakers same as the front speakers.

Note:

You can check the remaining time before the DVD/CD

Receiver turns off.

Press SLEEP. The remaining time appears in the

display window.

Note

The XTS mode is temporarily disabled when changing from

2.1 CH to 5.1 CH and it is enabled when changing it to 2.1

CH.

Dimmer

This function will change the brightness of the display

window on the front panel during in power-on status.

ꢀ

NORMAL

Press the DIMMER repeatedly.

XTS-P and XTS mode tune off

Mute

VIRTUAL sound

Press MUTE to mute your unit.

Press VSM to set the VIRTUAL sound.

You can mute your unit in order, for example, to

answer the telephone, the “MUTE” indicator flashes in

the display window.

Source

2.1 ch.

5.1 ch

Display

VIRTUAL

Effect

3D STEREO

Multichannel sound

Selecting input source

You can use VCRs or other units connected to the AV

IN or Optical connector. Refer to the Owner’s Manual

supplied with the unit for further information on the

operation.

ꢀ

3D STEREO

Realtime 3D positioned sound rendering

technology with stereo sources, optimized for

stereo speakers. Listeners may experience

amazing virtual surround effects with their own

multimedia players.

Press AUX repeatedly on the remote control to

select the desired input source.

Each time you press this button, the mode of the

function changes in the following sequence:

ꢀ

Multichannel sound

ꢀ AUX : for selecting the analog signal from AUX AUDIO

Input (L/R) Connector.

The Multichannel sound changes the sound in 5.1

ch into a virtual one in the 10.1 ch so that it

provides such a feeling that you listen to the sound

simultaneously from the right and left speakers and

center speaker.

ꢀ AUX OPT: for selecting the optical digital signal from

OPTICAL IN Connector.

ꢀ AUDIO IN: for selecting the analog signal from AUDIO IN

Connector.

Sound Mode

You can enjoy surround sound simply by selecting

one of the pre-programmed sound fields according to

the program you want to listen to. (2 ch. sound only)

Notes

^ꢀThe Optical input function is available only when the

sampling frequency of other unit is 32 - 96kHz.

^ꢀYou can also select the input source by pressing

FUNC. button on the front panel.

Press SOUND button repeatedly.

The sound mode is changed in the display window in

the following order.

BYPASS → ON STAGE → STUDIO → CLUB → HALL

→ THEATER 1 → CHURCH → PL ll MOVIE

Press and hold this button for about 3 seconds,

then press repeatedly to select other function.

→ PL ll MUSIC → PL ll MTRX → BYPASS...

Note:

Initial sound mode is BYPASS.

Controlling other TVs with the

Supplied Remote Control

You can control the sound level, input source, and

power switch of non-LG TVs as well. If your TV is

listed in the table below, set the appropriate

manufacturer code. (refer to page 28)

TUNER

AUX

OPEN/CLOSE

POWER

DIMMER

DVD

USB

PROG./MEMO.

AUDIO

SOUND

S-TITLE

CLEAR

1. While holding down TV POWER button, press the

number buttons to select the manufacturer code

for your TV (Refer to table on the right column).

REPEAT

REPEAT A-B

MARKER

SCAN

TITLE

SKIP

SCAN +

PAUSE/STEP

2. Release TV POWER button.

STOP

PLAY

Controlling your TV with the

Suppllied Remote Control

ZOOM

DISPLAY

RETURN

SETUP

You can control the sound level, input source, and

power switch of your LG TV with the supplied Remote

Control.

ENTER

You can control your TV using the buttons below.

By pressing

You can

SLEEP

MUTE

TV POWER

Turn the TV on or off.

VOL

CHANNEL(v / V) Scans up or down through

memorized channels.

VOLUME +/–

TV INPUT

Adjust the volume of the TV.

Switch the TV’s input source

between the TV and other input

sources.

RESOL .

HDMI

Note:

Depending on the unit being connected, you may not

be able to control your TV using some of the buttons.

POWER

INPUT

CHANNEL

VOLUME

TV Control

Buttons

Controlling Your TV with the Supplied Remote Control (Continued)

If more than one code number is listed, try entering them one at a time until you find the one that works with

your TV.

Manufacturer

ADMIRAL

AIWA

Code Number

16,33,37,44,45

Manufacturer

MONTGOMERY

WARD

Code Number

01,06,08,09

23,24,32,33,34

01,08

AKAI

NEC

AMARK

NOBLEX

AOC

18,19

49,50,51,52,53,54,55

01,03,08,33,35,37,44

16,38,39,40,41,42,43

01,08

01,09,16,17,18,19

28,29

PACKARD BELL

PANASONIC

PHILCO

BELL & HOWELL

BROKSONIC

CANDLE

07,11,13,25,35,36

01,06,07,08,09,

15,38,43,58

06,07,43,61,62,65

03,37,44

11,13

16,17,23

01,03,37,44,69

16,17,23

01,08,09,25,68

28,29

01,08

09,25,26,27,28,29

09,22,23,24,60,66

01,06,08,09,10,

23,24,33,34

12,62

PHILIPS

CCE

PIONEER

PORTLAND

PROSCAN

QUASAR

RADIO SHACK

RCA

REALISTIC

SAMPO

SAMSUNG

SANYO

CENTURION

CINERAL

CITIZEN

CORONADO

CROWN

CURTIS MATHES

DAEWOO

DAYTRON

EMERSON

FISHER

SCOTT

SEARS

SEMP

SHARP

FUNAI

46,47

GENERAL ELECTRIC

GRADIENTE

HITACHI

JC PENNEY

JVC

KIOTE

KMC

KTV

LG (GOLDSTAR)

LODGENET

LOGIK

LXI

MAGNAVOX

03,10,11,13,37,44

01,56,57,63,67

09,14,15,43

01,08,10,27,35

20,21,63,67

SIGNATURE 2000

SONY

SOUNDESIGN

SYLVANIA

01,04,05,06,07,

08,35,51

46,47

01,08,09,31

01,07,08,09,35,39,40

SYMPHONIC

TATUNG

TEKNIKA

TELERENT

THOMSON

YORX

TOSHIBA

WARDS

XR1000

07,09,16,33,51

09,33

01,25,26,27,64

01,06,08,09,10,33,34

09,24,25,26,27,28,29

01,02,04,05,06,

07,08,09,20,

34,35,43,51,61,62,65

01,32

MAJESTIC

MARANTZ

MEMOREX

MGA/MITSUBISHI

ZENITH

01, 02,33,59

01,08,32,34

Notes:

• Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.

• If you enter a new code number, the code number previously entered will be erased.

• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the

appropriate code number again.

Reference

Language Codes

Use this list to input your desired language for the following initial settings:

Disc Audio, Disc Subtitle, Disc Menu.

Language

Abkhazian

Afar

Afrikaans

Albanian

Ameharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali; Bangla

Bhutani

Bihari

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Code

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Language

Fiji

Finnish

French

Frisian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Hausa

Code

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Language

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Code

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

Language

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Code

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian

Oriya

Panjabi

Pashto, Pushto

Persian

Polish

Portuguese

Quechua

Rhaeto-Romance 8277

Rumanian

Russian

Samoan

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Shona

Tamil

Tatar

Hebrew

Hindi

Telugu

Thai

Tibetan

Tigrinya

Tonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

8279

8285

8377

8365

7168

8382

8372

8378

8368

Uzbek

Vietnamese

Volapük

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Danish

Dutch

English

Esperanto

Estonian

Faroese

Korean

Kurdish

Laothian

Latin

Latvian, Lettish

Sindhi

Area Codes

Choose a area code from this list.

Area

Code

Area

Ethiopia

Fiji

Finland

France

Germany

Great Britain

Greece

Greenland

Code

Area

Code

Area

Saudi Arabia

Senegal

Singapore

Slovak Republic

Slovenia

South Africa

South Korea

Spain

Sri Lanka

Sweden

Switzerland

Taiwan

Thailand

Turkey

Code

Afghanistan

Argentina

Australia

Austria

Belgium

Bhutan

Bolivia

Brazil

Cambodia

Canada

Chile

China

Colombia

Congo

Costa Rica

Croatia

Czech Republic

Denmark

Ecuador

Egypt

Malaysia

Maldives

Mexico

Monaco

Mongolia

Morocco

Nepal

Netherlands

Netherlands Antilles AN

New Zealand

Nigeria

Norway

Heard and McDonald Islands HM

Hong Kong

Hungary

India

Indonesia

Israel

Italy

Jamaica

Japan

Kenya

Kuwait

Libya

Luxembourg

Oman

Pakistan

Panama

Paraguay

Philippines

Poland

Portugal

Romania

Russian Federation RU

Uganda

Ukraine

United States

Uruguay

Uzbekistan

Vietnam

El Salvador

Zimbabwe

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Correction

Cause

Symptom

No power.

• Plug the power cord securely into the

wall outlet.

• The power cord is disconnected.

• Insert a disc. (Check that the DVD or,

audio CD indicator in the DVD display

is lit.)

• No disc is inserted.

The power is on, but

the DVD/CD Receiver

does not work.

• Select the appropriate video input

mode on the TV so the picture from

the DVD/CD Receiver appears on the

TV screen.

• The TV is not set to receive DVD signal

output.

No picture.

• Connect the video cable into the

jacks securely.

• The video cable is not connected

securely.

• Turn on the TV.

• The connected TV power is turned off.

There is no sound or

only a very low-level

sound is heard.

• Select the correct input mode of the

audio receiver so you can hear the

sound from the DVD/CD Receiver.

• The equipment connected with the

audio cable is not set to receive DVD

signal output.

• Connect the audio cable into the

jacks securely.

• The audio cables are not connected

securely.

• Turn on the equipment connected

with the audio cable.

• The power of the equipment connected

with the audio cable is turned off.

• Replace it with new one.

• Clean the disc.

• The audio connecting cable is damaged.

• The disc is dirty.

The playback picture is

poor.

• Insert a disc. (Check that the DVD, or

audio CD indicator in the DVD display

is lit.)

The DVD/CD Receiver • No disc is inserted.

does not start playback.

• Insert a playable disc. (Check the

disc type, colour system and Regional

code.)

• An unplayable disc is inserted.

• Place the disc with the playback side

down.

• The disc is placed upside down.

• Place the disc on the disc tray

correctly inside the guide.

• The disc is not placed within the guide.

• Clean the disc.

• The disc is dirty.

• Press the SETUP button to turn off

the menu screen.

• A menu is on the TV screen.

• Cancel the Rating function or change

the rating level.

• The Rating level is set.

• Clean the disc.

Loud hum or noise is

heard.

• The disc is dirty.

• Connect the speakers and

components securely.

• The speakers and components are

connected poorly.

• Move your TV away from the audio

components.

• The DVD/CD Receiver is located too

close to the TV.

Cause

Correction

Symptom

• The antenna is positioned or connected

poorly.

• Connect the antenna securely.

Radio stations cannot

be tuned in.

• Adjust the antennas and connect an

external antenna if necessary.

• The signal strength of the stations is too

weak (when tuning in with automatic

tuning).

• Tune in the station manually.

• No stations have been preset or preset

stations have been cleared (when

tuning by scanning preset stations).

• Preset the stations (page 21).

• The remote control is not pointed at the • Point the remote control at the remote

The remote control

does not work

properly.

remote sensor of the DVD/CD Receiver.

sensor of the DVD/CD Receiver.

• The remote control is too far from the

DVD/CD Receiver.

• Use the remote control within about 23

ft (7 m).

• There is an obstacle in the path of the

remote control and the DVD/CD

Receiver.

• Remove the obstacle.

• The batteries in the remote control are

flat.

• Replace the batteries with new ones.

• Press DIMMER on the remote control.

The front panel

display is too dim.

• Nothing is displayed on the front panel

display.

Specifications

Power supply

Power consumption

Refer to main label.

Net Weight

4 kg

External dimensions (W x H x D)

Operating conditions

Operating humidity

430 x 70 x 305 mm

Temperature: 5°C to 35°C, Operation status: Horizontal

5% to 85%

Laser

Signal system

Semiconductor laser, wavelength 650 nm

NTSC 525/60

Frequency response (audio)

Signal-to-noise ratio (audio)

Dynamic range (audio)

Harmonic distortion (audio)

Video input

240 Hz to 20 kHz

More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)

More than 70 dB

0.5 % (1 kHz, at 1W position) (20 kHz LPF)

1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1

(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(P^B)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1

87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz

10.7 MHz

Video output

COMPONENT VIDEO OUT

Tuning Range

Intermediate Frequency

Signal-to Noise Ratio

Frequency Response

Tuning Range

Intermediate Frequency

Stereo mode

60 dB (Mono)

240 - 10,000 Hz

522 - 1,620 kHz or 520 - 1,720 kHz

450 kHz

100 W + 100 W (4Ω at 1 kHz, THD 10 %)

Front: 100 W + 100 W (THD 10 %)

Center*: 100 W

Surround*: 100 W + 100 W (4Ω at 1 kHz, THD 10 %)

Subwoofer*: 200 W (3Ω at 70 Hz, THD 10 %)

AUDIO IN, OPTICAL IN

Surround mode

(* Depending on the sound mode

settings and the source, there

may be no sound output.)

Inputs

Outputs

MONITOR OUT, HDMI OUT,

COMPONENT VIDEO OUT

Front Speaker

(SH72PZ-F)

2 Way 2 Speaker

4 Ω

Rear Speaker

(SH72PZ-S)

2 Way 2 Speaker

4 Ω

Type

Impedance

Frequency Response

Sound Pressure Level

Rated Input Power

Max. Input Power

Net Dimensions (W x H x D)

Net Weight

100 - 20000 Hz

82 dB/W (1m)

100 W

200 W

300 x 1277 x 300 mm

4.11 kg

170 - 20000 Hz

82 dB/W (1m)

100 W

200 W

98 x 260 x 100 mm

0.38 kg

Center speaker

(SH72PZ-C)

2 Way 2 Speaker

4 Ω

Passive Subwoofer

(SH72PZ-W)

1 Way 1 Speaker

3 Ω

Type

Impedance

Frequency Response

Sound Pressure Level

Rated Input Power

Max. Input Power

Net Dimensions (W x H x D)

Net Weight

80 - 18000 Hz

82 dB/W (1m)

100 W

200 W

430 x 107 x 83 mm

1.12kg

40 - 1500 Hz

80 dB/W (1m)

200 W

400 W

165 x 422 x 415 mm

7.23 kg

P/NO : MFL49511791

Power Acoustik 112 TFT LCD PMD 112CMX User Manual
Perlick 66134 4 User Manual
Panasonic NV GS250 User Manual
Panasonic DMCFZ70K User Manual
Panasonic AG 3DA1E User Manual
Orion PARAGON PLUS 5376 User Manual
Olympus Camcorder c 120 User Manual
MB QUART FX1600 User Manual
Lochinvar 286 User Manual
Kenwood Car Stereo System KDC W237 User Manual