Frost Factory
KIS20
Issue 1/05
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
Unwind the cord before use.
Do not let the cord hand over the edge of
a table or counter, touch hot surfaces or
become knotted.
This appliance is not intended for use by
young children or infirm persons unless
they have been adequately supervised by a
responsible person to ensure that they
can use the appliance safely.Young children
should be supervised to ensure that they
do not play with the appliance.
It is recommended to regularly inspect the
appliance. Do not use the appliance if
power supply cord, plug or appliance
becomes damaged in any way. Return the
entire appliance to the nearest authorised
Kambrook Service Centre for examination
and/or repair.
Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.
This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use in
moving vehicles or boats. Do not use
outdoors.
The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
3
KNOWYOUR KAMBROOK FROST FACTORY
5
1
2
3
4
1. Motor body
4. Freezer containers x 4
5. Push button to shave ice
2. Ice chamber with shaving blade
3. Base
4
When ice shaving is complete, unplug the
Frost Factory and clean. Please see
Disassembling/Cleaning your Frost Factory
for directions.
Before first use
Remove all packaging material and
promotional labels. Wash the ice chamber
and base in warm, soapy water, rinse and
dry thoroughly.
NOTE! Please handle the ice chamber carefully
as the shaving blade is sharp. Mis-handling of the
blade may cause injury.
Wipe the motor body with a damp cloth.
Assembling/Operating the
Frost Factory
Place water in the freezer container
leaving 1cm from the top to place the lid
on.Then place the container in the freezer
for 24 hours.
Tips for the best use of your
Kambrook Frost Factory
Do
Ensure all removable parts have been
thoroughly washed and dried before
assembly (except motor body).
Place the motor body on a flat, dry
surface. Ensure the power plug is
unplugged from the power outlet.
Ensure the Frost Factory is correctly
assembled before operating.
Ensure the Frost Factory is used on
a clean, dry surface.
Place a deep bowl or container onto the
base platform to hold shaved ice.
Don’t
Place the ice chamber into the base by
lining up the flat sides and pushing the
chamber down.
Do not use ice cubes in the ice chamber.
Do not use the ice chamber to store ice.
Once the water in the freezer container
has set and formed into ice, remove the
freezer container from the freezer.
Do not immerse the motor body, cord or
power plug in water or any other liquid.
Do not use harsh abrasives or cleaners.
Remove the block of ice from the freezer
container.
Do not place any of the removable parts
in the dishwasher.
Place the ice in the ice chamber.
Cleaning your Frost Factory
Ensure the Frost Factory has been
unplugged from the power outlet.
Place the motor body on top of the ice
chamber. Plug the cord into a 230/240v
power outlet and switch on at the power
outlet.
Remove the bowl of shaved ice from
the base platform.
Push the top of the motor housing to
start shaving. Release the motor housing
to stop shaving.
Remove the motor body by lifting it in
an upward position. Do not immerse
in water.
5
Carefully remove the ice chamber by
lifting it in an upward position.
Some small ice pieces may remain in the
ice chamber; simply run the ice chamber
under warm water so that all excess ice
dissolves.
If extra cleaning is necessary, wash with
warm soapy water and dry thoroughly
with a clean cloth.
Do not use harsh abrasives or cleaners.
Dry all parts thoroughly.
Warning! Ice cubes must not be used
in the ice chamber. Only use the ice which
is formed in the freezer container.
NOTE! Do not place any of the removable parts
in the dishwasher.
NOTE! Do not immerse the motor base, cord
or power plug in water or any other liquid.
Cleaning the Motor Body
The Motor body can be cleaned with
a soft, damp cloth (do not use abrasive
agents or cloths which can damage the
surface). Dry and polish with a soft,
lint-free cloth.
Storage
Before storing, thoroughly wash and dry
all removable parts.
Assemble the Frost Factory and store on
the kitchen bench or in an easy to access
cupboard.
Store out of reach of children.
Store the appliance upright.
Do not store anything on top of
the appliance.
6
Place all ingredients except ice into
cocktail shaker and shake it well. Place
shaved ice into glass. Pour cocktail mixture
over the shaved ice and serve garnished
with pineapple leaves.
RECIPES:
FOR KIDS
Juicy treats
Add your favourite juice such as orange,
apple, pineapple or tropical to the shaved
ice.
Fluffy duck
15ml white rum
Cordial treats
15ml advocaat
60ml orange juice
15ml cream
Add your favourite cordial to shaved ice
and enjoy the icy treat.You can also add
the cordial to the water before it is frozen
to create a coloured snow effect.
Shaved ice
Soft drink flavourings:
Place all ingredients except ice into
cocktail shaker and shake it well. Place
shaved ice into glass. Pour cocktail mixture
over the shaved ice and serve garnished
with a twisted orange slice.
Use soft drinks to enjoy a different
delicious icy flavour.
FOR ADULTS
Margarita
30ml Tequila
Splice
30ml Midori
15ml fresh lime juice
30ml Triple sec or Cointreau
Shaved ice
30ml Malibu
60ml pineapple juice
40ml cream
Place all ingredients except ice into
cocktail shaker and shake it well. Place
shaved ice into glass with a salted rim.
Pour cocktail mixture over the shaved ice
and serve garnished with a lime slice.
Shaved ice
Place all ingredients except ice into
cocktail shaker and shake it well. Place
shaved ice into glass. Pour cocktail mixture
over the shaved ice and serve garnished
with a slice of pineapple and a cocktail
cherry.
Pina Colada
60ml pineapple juice
30ml coconut cream
30ml dark rum
Shaved ice
Tip! Always refill the empty freezer containers with
water and place in freezer, ready for next use.
7
Notes
8
Notes
9
Notes
10
If the product includes one or a number of
accessories only the defective accessory or
product will be replaced.
Kambrook 12 Month
Replacement Warranty
KAMBROOK warrants the purchaser
against defects in workmanship and
material, for a period of 12 months from
the date of purchase (3 months
commercial use).
In the event of KAMBROOK choosing to
replace the appliance, the guarantee will
expire at the original date, ie. 12 months
from the original purchase date.
In Australia, this KAMBROOK Guarantee
is additional to the conditions and
guarantees which are mandatory as
implied by the Trade Practices Act 1974
and State and Territory legislation.
Guarantee and purchase receipt for this
product are to be retained as proof of
purchase and must be presented if making
a claim under the terms of the
KAMBROOK guarantee.
For service, spare parts or product
information in Australia, please call
KAMBROOK on the customer Service
Line (free call) 1800 800 634.
KAMBROOK reserves the right to
replace or repair the appliance within
the warranty period.
Warranty does not apply to any defect,
deterioration, loss, injury or damage
occasioned by, or as a result of the misuse
or abuse, negligent handling or if the
product has not been used in accordance
with the instructions.The guarantee
excludes breakages and consumable items
such as kneading blades.
For service, spare parts or product
information in New Zealand,
please call KAMBROOK New Zealand,
Greenmount, Auckland Phone 09 271 3980
Fax 0800 288 513. For spare parts phone
09 271 3980.
If claiming under this guarantee the product
must be returned to freight prepaid.
This warranty is void if there is evidence
of the product being tampered with by
unauthorised persons.
YOUR PURCHASE RECORD (Please complete)
Attach a copy of purchase
receipt here.
DATE OF PURCHASE___________________________
MODEL NUMBER _____________________________
SERIAL NUMBER (If applicable) ___________________
Please don’t return purchase record
PURCHASED FROM ___________________________
until you are making a claim
Kambrook 461 Plummer Street, Port Melbourne 3207, Australia
Customer Service Line (free call) 1800 800 634 Customer Service Fax 1800 621 337
Kambrook New Zealand, Private Bag 94411, Greenmount, Auckland, New Zealand
Customer Service Line/Spare Parts 09 271 3980 Customer Service Fax 0800 288 513
Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustrations in this book. Issue 1/05
|