EN
HD MEMORY CAMERA
U
GC-FM2
Waterproof with
U
Audio Recording
GC-WP10
Detailed User Guide
Read this first
Before use, be sure to read “Safety Precautions”(P.2) and
“Cautions”(P.3) to use the product correctly.
GC-WP10 is waterproof. Before use in water, be sure to read
"Using the Camcorder in Water" (P.25).
®
ENGLISH
— Read Before Use —
Cautions
... expose the apparatus to dripping or splashing.
(GC-FM2 only)
Recording Medium
• Be sure to follow the guidelines below
to prevent corruption or damage to your
recorded data.
... insert any objects in the camcorder.
• Avoid using the unit
... in places subject to excessive humidity or
dust.
- Do not bend or drop the recording medium,
or subject it to strong pressure, jolts or
vibrations.
- Do not splash the recording medium with
water.
... in places subject to soot or steam such as near
a cooking stove.
... in places subject to excessive shock or
vibration.
... near a television set.
... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40 °C
or 104 °F) or extremely low (under 0 °C or
- Do not use, replace, or store the recording
medium in locations that are exposed to
strong static electricity or electrical noise.
- Do not bring the recording medium near
objects that have a strong magnetic field or
that emit strong electromagnetic waves.
- Do not store the recording medium in
locations with high temperature or high
humidity.
• 3D2O°FN)OteTmlepaevraettuhreesu. nit
... in places of over 50 °C (122 °F).
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
- Do not touch the metal parts.
• When formatting or erasing data using
the camcorder, only the file administration
information is changed. The data is not
completely erased from the recording
medium. If you want to completely erase
all of the data, we recommend either using
commercially available software that is
specially designed for that purpose, or by
physically destroying the camcorder with a
hammer etc.
... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving the unit
in high places while a cable is connected may
result in a malfunction if the cable is caught
• aTnodptrhoeteucntitthfaellusnointt,oDtOheNflOoTor.
... allow it to become wet. (GC-FM2 only)
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration
during transportation.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens to direct sunlight.
... swing it excessively when using the hand
strap.
LCD Monitor
• To prevent damage to the LCD monitor,
DO NOT
... push it strongly or apply any shocks.
... place the camcorder with LCD monitor on the
• bTootptoromlo. ng service life
... avoid rubbing it with coarse cloth.
• Do not press the LCD monitor with a
sharp-pointed object or press against the
surface of the LCD monitor with force when
operating the touchscreen.
... swing the soft camcorder case excessively
when the camcorder is inside it.
... store the camcorder in a dusty or sandy area.
• To prevent the unit from dropping,
- When using the camcorder with a tripod,
attach the camcorder to the tripod securely.
If the camcorder drops, you may be injured
and the camcorder may be damaged.
When a child uses the unit, there must be
parental guidance.
This may damage or break the LCD monitor.
If you press the LCD monitor at the same time,
it may cause a malfunction.
Main Unit
• For safety, DO NOT
... open the camcorder’s chassis.
... disassemble or modify the unit.
... allow inflammables, water or metallic objects
to enter the unit.
... place naked flame sources, such as lighted
candles, on the apparatus.
3
Cautions (Continued)
Battery
Waterproof Function
• When using the unit in a low temperature
environment (10°C (50°F) or below), the
operating time may be shortened, or it may
not function properly.
(GC-WP10 only)
• Before using the camcorder in water, be
sure to read “Using the Camcorder in Water”
(P.25) and to use the product correctly.
• Malfunction due to misuse by the customer is
Keep the unit warm by keeping it in a pocket
when using the unit out of doors in winter.
(Do not expose the unit to heat directly such
• nDootncootvuerseedthbiys wpraordrauncttyi.n water deeper than
• Washaepnoycokeutlweaavrme tehr.e) unit unused for a long
period of time, run down the battery to
prevent the battery from being depleted.
(Leave the unit recording or playing until
the unit is turned off automatically.)
Recharge the battery, and then run it down
about every 6 months.
3 m (10 ft) or for longer than 30 minutes.
Video Function
• The unit records video in Mpeg-4 AVC/H.264
format for video and AAC (2ch) format (GC-
WP10: stereo, GC-FM2: monaural) for audio.
You cannot play back the recorded video using
a component which does not support these
formats.
ATTENTION: The product you have purchased is
powered by a rechargeable battery
that is recyclable.
Audio Function
• Audio cannot be played back on HD Media
Player CU-VS100/JVC.
Please call 1-800-8-BATTERY for
information on how to recycle this
battery. (USA and Canada only)
Remember that this camcorder is intended for private consumer use only.
Any commercial use without proper permission is prohibited. (Even if you record an event such as a show,
performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission
beforehand.)
®
Trademarks
• HDMI is a trademark of HDMI Licensing, LLC.
• Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United
• ISnttaetel,sInatnedl /Coorroe,thanerdcPoeunnttiurimes.are trademarks or registered trademarks of Intel Corporation or its
• Msuabcsiindtioasrihe,sQinuitchkeTiUmneitaerdeSrteagtiesstearnedd otrtahdeermcoaurkntorfieAspple Inc. registered in the U.S. and other countries.
• Eye-Fi is a trademark of Eye-Fi, Inc.
• Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
Key features of camcorder
1. Full HD (1920 x 1080 / 30 fps) video recording
2. 3 inch touch screen
3. Electronic camera shake correction
4. Easy uploading to YouTube with the supplied software LoiLoScope EX
5. Eye-Fi card compatible: Uploading videos & still images via Wi-Fi network
6. iFrame video format recording (ideal for video editing with iMovie)
7. HDMI output connector
8. Waterproof design within 3 m/10 ft, 30 minutes (GC-WP10 only)
9. MP3 voice recorder (GC-WP10 only)
4
Daily Maintenance
Be sure to turn off the power and detach the cables before performing any
maintenance.
Wipe this unit with a dry, soft cloth to remove any dirt.
When it is extremely dirty, soak the cloth in a solution of neutral
detergent, wipe the body with it, and then use a clean cloth to remove
the detergent.
CAUTION
Camcorder
Do not use benzene or thinner. (Cause of damage to or
malfunction of the unit)
When using a chemical cloth or other products, be sure to observe
the instructions of the product.
Do not leave the device in contact with rubber or plastic products
for a long time.
•
•
•
Use a lens blower (commercially available) to remove any dust, and a
cleaning cloth (commercially available) to wipe off any dirt. (Mold may
form if the lens is left dirty.)
Perform [TOUCH SCREEN ADJUST] (P.45) if the reactive area of the screen
is misaligned with the touched area.
Lens/LCD
Monitor
(Adjust by lightly tapping with a corner of an SD card, etc. Do not press
with an object with a sharp tip or do not press hard.)
See page 27 for maintenance after recording in water. (GC-WP10 only)
5
Names and Functions of Components
GC-WP10
#
,
+
-
.
$
(
%
!
&
/
0
*
2
)
,
GC-FM2
#
+
-
!
$
.
*
/
0
2
LCD Monitor
Speaker
Power Button [
SCREEN LOCK Button (P.26)
(GC-WP10 only)
Video/Still Image Select Button [
(GC-WP10 only)
Microphone
!
#
$
%
,
-
GC-WP10: Stereo
GC-FM2: Monaural
AV Connector (P.32)
GC-WP10: also serves as Headphones
Connector
SD Card Slot (P.12)
USB Connector (P.14, 39)
HDMI Mini Connector (P.32)
USB Connector Lever (GC-FM2 only)
(1): Push the connector out
(2): Retract the connector
]
]
&
.
/
0
1
POWER/CHARGE Lamp
(
)
*
+
Recording Button (P.20)(GC-WP10 only)
Tripod Mounting Socket
Lens
Press-and-hold the lever and slide
•
Cover
2
7
Indications on LCD Monitor
Top Menu
+
!
,
-
.
#
$
*
*
)
%
&
%
/
)
(
(
Recording Mode
Playback Mode
Video Recording Button (P.20)
Still Image Recording Button (P.20)
Audio Recording Button (P.33)
(GC-WP10 only)
Time
Play Select Button
Basic Settings Button (P.44)
Battery Indicator (P.15)
AC Adapter
Video Playback Button
Still image Playback Button
Audio Playback Button (GC-WP10 only)
Recording Select Button
!
#
$
,
-
.
/
%
&
(
)
*
When connected
When inoperative
When both of the Battery indicator and AC
adapter icons are displayed, the power is
supplied through the both.
Video Recording Mode Select Button (P.21)
+
8
During Recording
!
+
,
*
)
(
!
,
+
!
#
$
%
#
$
%
&
&
%
*
)
*
)
&
(
L
R
#
$
(
Still images
Videos
Audio
(GC-WP10 only)
Videos
WIND CUT [ON] (P.45)
Headphones Volume Button
(GC-WP10 only)
AE Select Button (P.23)
(GC-WP10 only)
Recording Start/Stop Button
Menu Settings Button (P.44)
Play Select Button
Top Menu Button
Zoom Buttons
EFFECT (P.45)
Counter/Remaining Time
Audio (GC-WP10 only)
Counter
Audio Recording Start/Stop Button (P.33)
Play Select Button
Top Menu Button
Microphone Input Level
Headphones Volume Buttons
Remaining Time
!
#
!
#
$
%
&
(
)
*
$
%
&
(
)
*
+
,
Audio Recording File Name
Still images
Menu Settings Button (P.44)
AE Select Button (P.23)
(GC-WP10 only)
!
#
Self Timer (10 Seconds/OFF) Select Button
Recording Button
Recording Direction Select Button (P.22)
Play Select Button
Top Menu Button
Zoom Buttons
$
%
&
(
)
*
+
,
EFFECT (P.45)
Remaining Number of Shots
9
Playback Index Screen
+
*
!
#
$
1
0
/ . -
)
!
#
,
+
$
%
(
&
%
&
(
)
*
Videos/ Still Images
Audio
(GC-WP10 only)
Videos/ Still Images
Audio (GC-WP10 only)
Playback Operation
External File Button (P.36)
Delete Button (P.37)
Recording Select Button
Top Menu Button
Video (MP4)/ Still Image (JPG)
Previous Page Button
Recorded Date
Recording Select Button
Eye-Fi SETTING Button (P.42, only when
using Eye-Fi card)
Zoom Display Button (P.28)
Delete Button (P.30)
Volume Button (P.28)
Top Menu Button
!
#
$
%
&
!
#
$
%
&
(
)
*
+
Next Page Button
Previous Page Button
Volume Button (P.34)
File in Playback
(
)
*
+
,
-
.
Next Page Button
Battery Indicator (P.15)
Recording Media
SD card
Next Date Button
Recorded Year
Previous Date Button
/
0
1
10
Getting Started
Accessories
USB Cable
(Type A – Type B Mini)
(GC-WP10 only)
USB Extension Cable
(GC-FM2 only)
Dedicated AV Cable
Core Filter
NOTE
Optional accessory
Page
You can use the hand strap
attached to the camcorder
under water.
AC adapter (AC-V10LU)
(P.15)
•
Hand Strap
(GC-WP10 only)
SD card / SDHC card /
SDXC card
(P.12)
(P.42)
Eye-Fi card
Attaching the Core Filter to the USB Cable
GC-WP10: Attach the core filter to the USB cable.
GC-FM2: Attach the core filter to the USB extension cable.
The core filter reduces noise generated when connecting the camcorder to an external
component. Connect the end of the cable with the core filter to the camcorder.
Release the both
stoppers.
3 cm (1-3/16")
Wind once.
To be connected
to the camcorder.
NOTE
• Be sure to use the USB cable or the USB extension cable with the core filter attached
when connecting the camcorder to the AC adapter or a computer.
(GC-WP10 only)
Attaching the Hand Strap
To guard against dropping the camcorder, we
recommend attaching the hand strap.
NOTE
When carrying the camcorder, please be careful
not to drop it. Dropping it may cause injury or a
malfunction of your camcorder.
•
When a child uses the camcorder, there must be
parental guidance.
•
11
Getting Started
Inserting an SD Card
GC-WP10
GC-FM2
Press the button( ) for about 1 second to turn off the camcorder.
1 The power lamp goes out.
Open the cover( ).
2
Insert an SD card( ).
3 Turn off the power of this unit before inserting or removing a card.
Close the terminal cover( ) firmly.
4
To remove an SD card
Push the card inward once, then pull it out
straight.
Be sure to insert the SD card with the power
turned off.
NOTE
To protect data, do not touch the terminals of the SD card.
Operations are confirmed on the following SD cards. (P.13)
•
•
12
Getting Started
Manufacturer
Panasonic, TOSHIBA, SanDisk, ATP, Eye-Fi
Class 4 or higher compatible SD card (2 GB)
Class 4 or higher compatible SDHC card (4 GB to 32 GB), or Class 4 or
higher compatible SDXC card (48 GB to 64 GB)
Video recording
For ATP, only Class 4 or higher compatible SDHC card (up to 16GB)
SD card (256 MB to 2 GB), SDHC card (4 GB to 32 GB), or SDXC card (48
GB to 64 GB)
For ATP, only SD card or SDHC card (up to 16GB)
Still image recording/
Audio recording
If other SD cards, SDHC cards or SDXC cards than the above are used, they may fail to
record data correctly, or they may lose data that had already been recorded.
The Eye-Fi card is a SD type memory card with built-in wireless LAN. You can transfer
videos and still images to a computer or the Web via the Eye-Fi card. (An Internet
accessible environment and a wireless LAN router are separately required.)
See page 42 to use an Eye-Fi card.
•
•
When your computer cannot recognize the SDXC card
Confirm and upgrade the OS of your computer.
Not compatible.
Necessary to upgrade to SP2 or higher.
Windows XP /
Windows XP SP1
Necessary to download the upgrade software. (KB955704)
Windows XP SP2 /
Windows XP SP3
Not compatible.
Necessary to upgrade to SP1 or higher.
Windows Vista
Mac OS
Not compatible.
13
Getting Started
Charging the Battery
GC-WP10
GC-FM2
Turn off the camcorder by pressing the button( ) for about
1 second.
The power lamp goes out.
1
2
Turn on the computer and connect to the camcorder( ).
Blinks: Charging
Charge Lamp
CHARGE STATUS
Goes out: Charging finished
Charging Time
Approx. 3 h
You can confirm the remaining battery level by touching
the screen (for about 1 second) during charging. (You
cannot confirm the level when the battery is extremely
low.)
When the charging is finished, disconnect the
camcorder from the computer.
NOTE
The charging time is when the camcorder is charged at 25°C (77 °F).
If the battery is charged outside the room temperature range of 10 °C (50 °F) to 35 °C
(95 °F), charging may take a longer time or it may not start. The recordable and
playable time may also be shortened under some usage conditions such as at low
temperature.
•
•
Charging is not possible while the camcorder is turned on.
14
Getting Started
The battery is not charged at the time of purchase. Charge before starting to use the
camcorder.
When the battery level is extremely low, the camcorder does not turn on until it is
charged even if it is connected to the computer or AC adapter.
Do not turn the computer off or into the sleep mode during charging (the charging
will stop).
With some types of computers, charging is possible even when the computer is
turned off. Refer to instruction manual of the computer or consult with the
manufacturer of your computer.
•
•
•
•
You cannot record or play back video/still image/audio while the camcorder is
connected to a computer. You can record or play back video/still image/audio while
the AC adapter is connected to the camcorder.
•
Indication when using the battery
Fully charged
Medium
Very low
Recharge the battery at an early opportunity.
Indication when using the AC Adapter
When both of the Battery indicator and AC
adapter icons are displayed, the power is
supplied through the both.
(When connected)
(When inoperative)
Charging with the AC Adapter (optional)
Optional accessory: AC-V10LU/JVC
GC-WP10
GC-FM2
GC-WP10
GC-FM2
Connect with the AC adapter using the supplied USB cable.
Connect the USB connector of this unit with the AC adapter.
(You can connect also using the supplied USB extension cable.)
15
Getting Started
Using the Touchscreen
The following are some examples.
Touch to Select
To select Video/Still Image/Audio on the Top Menu (Audio is for GC-WP10 only.)
Touch
to return to the Top Menu and select the mode.
Recording
Playback
Touch to start/stop recording.
Touch the thumbnail of the desired
scene to play back.
MEMO
The touchscreen of this unit is pressure-sensitive. When the touchscreen does not
respond smoothly, apply slightly more force to your fingertip.
•
16
Getting Started
To search for the desired scene
Press the page switching button (
or the date switching button ( ) to
search for the desired scene.
)
MEMO
The touchscreen of this unit is pressure-sensitive. When the touchscreen does not
respond smoothly, apply slightly more force to your fingertip.
Do not press or rub with excessive force.
If you apply a protect sheet or a sticker, the touchscreen may not respond smoothly.
Do not operate the touchscreen using an object with a sharp or hard tip.
Touching two or more places at a time may cause a malfunction.
Perform [TOUCH SCREEN ADJUST] (P.45) if the reactive area of the screen is misaligned
with the touched area. (Adjust by lightly tapping with a corner of an SD card, etc. Do
not press with an object with a sharp tip or do not press hard.)
•
•
•
•
•
•
17
Getting Started
Clock Setting
SET DATE/TIME!
SET
YES
NO
RETURN
QUIT
CLOCK SETTING
Press the button( ) for about 1 second to turn on the camcorder.
1 The power lamp turns on.
Touch [YES( )] when the [SET DATE/TIME!] screen appears.
2
Set the date and time( ).
3 •
Touch the month, day, year, hour and minute to select it.
Touch
to make adjustments.
•
After setting the date and time, touch [SET].
•
Set the region where you live and touch [SAVE].
4 The city name and time difference are displayed.
Touch
to make adjustments.
To reset the clock
Set the clock with [CLOCK ADJUST] from the Basic Settings. (P.45)
1
Press the button to turn on the camcorder.
2
Touch
on the top menu.
3
4
Touch [CLOCK ADJUST].
Touch [CLOCK SETTING].
The subsequent procedure is same as in the Steps 3 and 4 of “Clock Setting”.
18
Getting Started
NOTE
The [SET DATE/TIME!] screen does not appear when the date and time are already set.
The [SET DATE/TIME!] screen appears when the camcorder has not been used for a
long time. Charge the battery before setting the clock. (P.14)
When using this unit abroad, change the date and time display to the local time by
•
•
•
simply selecting your travel destination in [AREA SETTING]. (P.45)
19
Recording
Recording Video/Still Images
Before recording an important scene, it is recommended to conduct a trial recording.
Press the button( ) for about 1 second to turn on the camcorder.
1
Select video or still image mode( ) from the Top Menu.
2 When you turn on the power, the Top Menu appears only for the first time after
purchasing the camcorder.
To return to the Top Menu, touch
during video or still image recording.
Start recording.
3
For Videos
Touch the Recording START/STOP button( ).
Touch it again to stop recording.
GC-WP10: You can make recording also with a press of the Recording button( ).
For Still Images
Touch the SNAPSHOT button( ).
To shoot continuously, keep touching the button.
GC-WP10: You can shoot still image also with a press of the Recording button( ).
To shoot in landscape mode, follow the same procedure.
NOTE
After video recording for 12 consecutive hours, recording automatically stops.
•
20
Recording
For continuous video recordings of long consecutive hours, the file is split into pieces
automatically either in every 30 minutes or if the size exceeds 4 GB.
Using the AC adapter (optional), you can record for long consecutive hours.
To prevent the situation of forgetting to turn off the power, if this unit is not operated
for 5 minutes, the power is turned off automatically.
Brightness of the LCD monitor increases when recording in bright light. The LCD
monitor increases brightness when the AC adapter is connected to the camcorder.
However, it returns to normal brightness when you do not operate the camcorer
•
•
•
•
during video recording for 5 minutes. (
3 seconds at the moment of switching.)
/
is displayed for about
Change the Recording Quality ( video only)
Preparation:
Video recording
Touch
.
1
Touch
.
2
Select the recording quality.
3
When you place priority on Video Quality
1920 × 1080 / 30p
HD 1080
When you place priority on motion of the video
1280 × 720 / 60p
HD 720
iFrame
QHD
When you use the video in Apple iMovie '09
960 × 540 / 30p
When you make a long-duration recording
960 × 540 / 30p
Recording at Intervals (TIME-LAPSE RECORDING) (P.24)
•
21
Recording
Switching the Image Orientation ( Still Image Recording only)
Touch
.
Touch
.
Landscape
Image orientation can be changed to correspond to
the camera’s orientation.
Portrait
To use functions in landscape mode
1
Touch
.
2
3
Select the function to use.
Touch AE, Face Priority AE Switching (P.23)
SELF-TIMER
Menu Settings (P.45)
QUIT
Touch
.
Quit.
NOTE
The size of still images differs between the portrait and the landscape modes.
Portrait mode: 2592 × 1944 (5M)
Landscape mode: 1440 × 1920 (2.7M)
The image orientation do not switch automatically. Switch it according to the actual
orientation of the camcorder.
Video is not output through the AV cable when the Image Orientation is set to Portrait.
Video is not output at 480i or 480p through the HDMI cable when the Image
Orientation is set to Portrait.
•
•
•
•
22
Recording
Useful Functions for Recording
Adjusting the brightness
based on the touched area
(Touch AE)
Shooting Human Subjects
(Face Priority AE)
(GC-WP10 only)
Preparation:
recording
Video/
Still image
Preparation:
recording
Video/
Still image
Touch
.
Touch
.
(GC-WP10 only)
1
2
1
With every touch, Touch AE and
Face Priority AE alternate.
Frames appear on human faces in
which exposure is automatically
adjusted.
With every touch, Touch AE and
Face Priority AE alternate.
Touch the area to adjust.
NOTE
Up to 16 frames on faces can be
displayed in total. You cannot choose
the frame to adjust exposure arbitrarily.
Depending on the condition, faces may
not be detected.
If you cannot get proper effect, turn off
the Face Priority AE.
•
•
•
With the touch, a frame appears in
which exposure is adjusted.
The frame disappears if you touch
the frame or if you use zoom
function.
23
Recording
Recording at Intervals
Touch the Recording START/
STOP button( ).
(TIME-LAPSE RECORDING)
3
This function enables the changes of a
scene that occur slowly over a long
period to be shown within a short time
by taking frames of it at a certain interval.
Preparation:
Video recording
Touch to display the Top
Menu and touch
.
1
Recorded Time (
)
Actual Elapsed Time (
)
NOTE
Audio cannot be recorded during
time-lapse recording.
Zooming is not available in time-lapse
recording.
When recording is stopped with the
recorded time less than "0:00:00:17",
the video will not be saved.
•
•
•
Select a recording interval.
2
Recording stops automatically 99 hours
after it is started.
•
•
Make use of a tripod and optional AC
adapter for time-lapse recordings with
long intervals. (optional: AC-V10LU/JVC)
The recording quality during time-lapse
recording is the same as that of HD 720
(P.50).
•
Recording interval/Playback speed
0.5 second/30 times
5 seconds/300 times
40 seconds/2400 times
24
Recording
(GC-WP10 only)
Using the Camcorder in Water
After use in water, rinse the camcorder with fresh water, then wipe off and dry it
well in a well-ventilated place out of direct sunlight as soon as possible. (P.27)
Before use
Confirm that there is no foreign material inside the terminal cover. (Foreign material
causes ingress of water.)
Make sure that there is no damage to and no
•
foreign material (hair, lint, sand, dust, fluid etc.)
adhered to the packing inside the cover, the SD
card slot, or the parts around the connectors.
If you find damage, do Not use the unit.
Consult your JVC dealer or the nearest JVC service
center.
•
Close the terminal cover firmly.
Close the cover firmly until it clicks into place.
Confirm that the red sign completely goes off.
•
•
CAUTION
This camcorder is equipped with a waterproof function corresponding to JIS (Japanese
•
Industrial Standards) IPX8. This camcorder can make recordings in marine water and
fresh water not deeper than 3 m (10 ft) or for not more than 30 minutes. (The waterproof
capability is tested in accordance with JVC test standard and it does not assure damage-
free or trouble-free operation. Waterproof function not evaluated by UL.)
Do not soak the camera in hot springs or water of 40 °C (104 °F) or higher.
Do not subject the camcorder to high water pressure such as in torrent or fall, or to
excessive pressure or impact such as by diving with the camcorder in hand.
The waterproof capability cannot be guaranteed if the camcorder is subject to impact
such as dropping. Consult with the dealer if the camcorder is subject to impact.
The camcorder sinks in water. Use the strap to prevent it from falling.
Open and close the cover in a dry place, after wiping moisture off the camcorder.
Wipe off immediately if such liquids as detergent solution, soap water, hot spring
•
•
•
•
•
•
water, bath agent, oil, sunscreen lotion or chemical liquid are spilled on the camcorder.
When used in water, at first, air bubbles may come out of the unit but it is not a
malfunction.
•
25
Recording
Press the button( ) for about 1 second to turn on the camcorder.
1
2
Select Video or Still Image mode( ) on the Top Menu.
Press the SCREEN LOCK button( ) for more than 1 second.
3 •
When using this unit in water, temporarily disable the touchscreen so that it will
not malfunction with the water pressure.
is displayed on the screen.
Press the Recording button( ) to record.
Press the SCREEN LOCK button again, for more than 1 second, to turn off
and activate the touchscreen.
•
•
•
To select video recording/still image recording in water
Pressing the
button( ) will toggle the operation between Video Recording and
Still Image Recording.
Audio recording is not selectable in water.
26
Recording
After use
After use in water or when dusted with sandy dust, rinse the camcorder with fresh
water and dry it well as soon as possible.
1
Press the button for about 1 second to turn off the camcorder.
Make sure that the connector cover is closed tightly.
2
Rinse with fresh water.
Soak and wash in an appropriate depth of still fresh water in basin.
Push aside the buttons to wash off the dirt in the gap.
Do not rinse with chemicals, soap, neutral detergent or alcohol.
Do not apply current of water such as
tap water directly to this unit.
3
Dry.
Wipe off with a dry soft cloth and dry in a well-ventilated place out of direct sunlight. There may
be water near the microphone. Therefore, aim the camcorder downward and remove the water.
Wiping with some sand remaining can cause a scratch. Wipe after rinsing the sand off.
Also, wipe off strange materials and water drops inside the cover.
CAUTION
Do not dry with heat such as by using a hairdryer. The waterproof capability will deteriorate.
Do not leave the camcorder for long time in low temperature environment in cold
climates or in heat of 40 °C (104 °F) or higher (such as under sun light, in a sun-heated
car or near the heater). The waterproof capability will deteriorate.
•
•
After use in marine water, soak in adequate amount of fresh water approximately 10
minutes and rinse with fresh water in order to clean off the salt.
Do not leave the camcorder soaked in or wet with salt water. It may cause corrosion,
tarnish, or deterioration of water resistance.
Remove the strap from camera and rinse the strap with fresh water.
Do not connect cables or charge with water drops remaining.
JVC cannot be held responsible of any loss of data due to ingress of water into the unit.
It is recommended to replace the packing (optional) once a year to maintain the
•
•
•
•
•
•
waterproof capability. Consult your nearest JVC service center. (P.52)
27
Playback
Playing Back on the Camcorder
Select a video or still image to play back
from the index screen.
Play back a file.
3 Touch the screen to display screen
Preparation:
image recording
Video recording/
Still
messages and operation buttons ( ).
(They will disappear if touched
again.)
Touch
.
1
Operation modes (
)
The camcorder turns to play back
mode.
Playback
Reverse playback
Pause
Select a file.
Forward search
Reverse search
Forward slow-motion
Reverse slow-motion
2
Touch
to stop playback.
If you touch
, the thumbnail
images will enlarge.
Touch and drag the thumbnail
Operation Buttons ( ) (P.29)
Adjust the volume (
)
Touch +/– to make adjustments and
touch to quit.
display left and right or touch
to move to another page.
If a shooting duration of still images
is within 2 seconds, they are
Video quality (
)
displayed as one thumbnail (group).
28
Playback
Operation Buttons (during Video
Playback)
Repeated Playback of a Part
(A-B Repeat)
Playback
Preparation:
Video playback
Pause
Play back the video, then
Advances to the next video
touch
at the starting/end
1
Returns to the beginning of the
scene
points.
Forward search
Reverse search
Forward slow-motion
Reverse slow-motion
With every touch, the setting
toggles as shown below.
Operation Buttons (during Still
Image Playback)
Set starting point
Start slideshow
Stop slideshow
Advances to the next still image
Returns to the previous still image
Play back a group continuously
Set end point
No setting
(normal playback)
NOTE
A-B repeat is possible only within one
scene.
The setting is canceled if Stop is
selected after the end point is set.
•
•
29
Playback
Deleting Files
Preparation:
Video/
Still image
NOTE
playback
You can delete the files by touching
during video/still image playback.
•
Touch
.
1
Touch the video/still image
file to delete.
2
A check mark( ) appears on the
selected video/still image.
If you touch the video/still image
with a check mark, the selection is
cancelled.
Touch [SEL ALL] to select all the
video/still image files.
Touch [REL ALL] to cancel all the
selection.
Touch [SET].
3
4
Touch [DELETE] when the
confirmation message
appears.
30
Playback
(Trimming)
Copying a Part in the Video
Preparation:
Video playback
Touch [YES] when the
confirmation message
appears.
When copying finishes, the copied
file is added to the index screen.
5
Play back the video, then
touch
.
1
2
NOTE
When you copy a part of the video, the
division point may not be accurate
within a 1 second margin of error.
•
Pause playback at the
starting point and touch
.
TRIMMING
QUIT
Copy starting point (
)
Resume playback, pause at
the end point and touch
.
3
4
TRIMMING
SET
QUIT
Copy end point (
)
Touch [SET].
31
Playback
Viewing Files on TV
Preparation:
Turn on the TV.
•
Turn on the power( ) of the camcorder and select the playback mode.
•
To connect using the dedicated AV cable (provided)(
)
Video Input
Yellow
Video Input
White
Audio Input L)
(
Red
Audio Input (R)
To connect using the HDMI mini cable (optional)(
)
HDMI Terminal Input
1
2
3
Connect the camcorder to a TV.
Switch to the TV’s external input connector.
Start the playback. (P.28)
NOTE
Use the supplied AV cable. Otherwise, image and sound cannot be output.
If the AV cable or HDMI cable is disconnected during playback, the playback will be
paused.
When an AV cable and an HDMI cable are connected, output to the HDMI cable is prioritized.
Also refer to instruction manual of the TV.
We recommend using the Category 2 HDMI cable (High Speed cable).
Insert the connector in the right direction. Forcing the connector into the terminal
may cause damage.
•
•
•
•
•
•
If you connect the camcorder using the AV cable, image is output only when playing
back video. If you connect the camcorder using the HDMI Mini connector, image is
output when both playing back and recording video. However, if you connect the
camcorder to a TV with 480p or 480i resolution, image is output only when playing
back video.
•
Image is not output during the audio recording and audio playback.
•
32
Audio Recording
(GC-WP10 only)
Recording Audio
L
R
Press the button( ) for about 1 second to turn on the camcorder.
Touch Audio mode( ) on the Top Menu.
1
2 To return to the Top Menu, touch
in the audio recording screen.
Touch the Recording START/STOP button( ).
3 Audio recording starts.
Touch again to stop audio recording.
NOTE
If you record audio 12 hours continuously, it will stop recording automatically.
•
33
Audio Playback
(GC-WP10 only)
Playing Back Audio on the Camcorder
You can select and play back the
Play back the audio.
recorded audio from an index screen.
3
Preparation: Audio recording
Touch the PLAY button.
1
Operation modes (
)
L
R
Playback
Pause
The camcorder turns to play back
mode.
Forward search
Reverse search
Adjust the volume (
)
Select audio to play back.
Touch +/– to make adjustments and
2
touch
to quit.
Operation buttons (
)
Playback
Pause
Advances to the next audio
Returns to the beginning of the
Audio currently playing
Forward search
Reverse search
Touch
page.
to move to another
Changes the playback order
(Random Playback)
To the recorded audio files, serial
numbers 0001-9999 will be given.
Touch
to return to the audio index screen.
34
Audio Playback
NOTE
Repeated Audio Playback of a
Part (A-B Repeat)
A-B repeat is possible only within one
scene.
The setting is canceled if Stop or
Random Playback is selected after the
end point is set.
•
•
Preparation: Audio playback
Play back the audio, then
touch
points.
at the starting/end
1
With every touch, the setting
toggles as shown below.
Set starting point
Set end point
No setting
(normal playback)
35
Audio Playback
Folders and files with double-byte
characters (such as Japanese) cannot
be played.
Folders and files with more than
8 single-byte characters cannot be
played.
(You cannot edit file name with the
camcorder. Use a computer and other
devices to edit file names.
You cannot delete external audio files
with the camcorder.
You can play only stereo audio files.
You can play audio at 44.1 kHz and
48 kHz. (Playback of not all the files is
guaranteed.)
You cannot play back Mpeg2 and
Mpeg2.5 audio files.
•
•
Play External Audio Files
You can play audio files (MP3) recorded
with other devices such as computer.
Preparation: Audio playback
Touch
screen.
on the audio index
1
Select audio to play back.
•
2 Touch
to return to the normal
•
audio playback.
•
NOTE
You can create up to 3 levels of folders
under [MUSIC].
You can create up to 50 subfolders per
folder.
You can create up to 999 files per folder.
Display of tags and the Album Art are
not supported.
•
•
•
•
•
Structure of folders and files
Using computer or other devices, copy the audio to play back (folders and files) to an
SD card under [MUSIC] folder.
Folders
Files
SAMPLE.MP3
[PICSIO_SD]
[MUSIC]
[1234]
TEST.MP3
SOUND.MP3
[ABCDE]
[ZZZ]
The name is arbitrary (8 or
less single-byte
The name is arbitrary (8 or
less single-byte
alphanumeric characters).
alphanumeric characters).
The extension is [MP3].
36
Audio Playback
(GC-WP10 only)
Delete Audio Files
Preparation: Audio playback
Touch [SET].
3
4
Touch
.
1
Touch [DELETE] when the
confirmation message
appears.
NOTE
You can delete the files by touching
during audio playback.
You cannot delete external audio files.
•
•
Touch the audio file to delete.
2
SEL ALL
REL ALL
DELETE
SET
A check mark appears on the
selected audio.
If you touch the audio with a check
mark, the selection is cancelled.
You can select all the audio files by
touching [SEL ALL].
You can cancel all the selection by
touching [REL ALL].
You can confirm the audio to play
back by touching
Playback).
(Confirm
37
Audio Playback
(GC-WP10 only)
Copying a Part in the Audio
Preparation: Audio playback
Resume playback, pause at
the end point and touch
.
3
Play back the audio file, then
touch
.
1
TRIMMING
SET
QUIT
Copy end point( ).
Touch [SET].
4
5
Pause playback at the
starting point and touch
.
2
Touch [YES] when the
confirmation message
appears.
When copying finishes, the copied
file is added to the index screen.
NOTE
TRIMMING
QUIT
The starting and end points of the
copied audio may not exactly match
the selected points.
•
Copy starting point ( ).
38
Connecting with a Computer
Make a Backup on Computer
Preparation: Turn on the camcorder and the computer.
You can save the recorded videos, still images or audio files on a computer.
Connect the camcorder to a computer.
1
GC-WP10
See page 7 for the position of the USB connector on GC-FM2.
If the camcorder is not charged, it will not turn on when connected to the
computer.
Windows: Double-click [PICSIO_SD] in [Computer] (or [My
Computer]).
Mac: Double-click [PICSIO_SD] on the desktop.
2
Copy video/still image/audio files from the [DCIM] folder.
3
[PICSIO_SD]
[DCIM]
[100JVCSO]
[101JVCSO]
[102JVCSO]
PIC_XXXX.MP4
PIC_XXXX.MP4
PIC_XXXX.JPG
PIC_XXXX.JPG
PIC_XXXX.MP3
PIC_XXXX.MP3
Videos
Still Image
Audio
To disconnect the camcorder from a computer (Windows)
1
Click the
icon in the task tray on the computer screen.
The [Safely Remove Hardware] window appears.
2
Select [USB Mass Storage Device] and then click [Stop].
To disconnect the camcorder from a computer (Mac)
Drag and drop [PICSIO_SD] and [PICSIO_APP] on the desktop to the Trash. When they
disappear from the desktop, disconnect the USB cable.
39
Connecting with a Computer
Using the Supplied Software
For Windows PC Users
You can edit videos and still images, or transfer them to iPod or the sharing site
(YouTube, etc.) using the supplied software. (Please use another software for DVD or
BD creation and buring.)
Right click [Computer] (or [My Computer]) in the Start Menu, then select [Properties]
and confirm the following items.
For Windows Vista/Windows 7
Windows Vista: Home Basic or Home Premium
(Pre-installed edition only for both)
Windows 7: Home Premium
(Pre-installed edition only)
Service Pack 2 (Windows Vista only)
Processor:
!
!
#
%
$
&
#
$
Intel Core 2 Duo CPU 2 GHz or higher
Intel Core 2 Duo CPU 3 GHz or higher recommended
Intel Core 2 Quad CPU 2 GHz or higher recommended
Memory: 2 GB or more
%
&
System type: 32 bit/64 bit
For Windows XP
Windows XP: Home Edition or Professional
(Pre-installed edition only for both)
Service Pack 3
!
#
$
!
#
Processor:
Intel Core 2 Duo CPU 2 GHz or higher
Intel Core 2 Duo CPU 3 GHz or higher recommended
Intel Core 2 Quad CPU 2 GHz or higher recommended
Memory: 2 GB or more
$
%
%
Other Conditions
Graphic: Intel 945 or later, NVIDIA Geforce 6000 series or later, ATI Radeon 9600 or later
NOTE
The system configuration described above is required in order to use the supplied
software.
Microsoft .NET Framework 3.5sp1 must be installed on your computer.
The camcorder is compatible to the graphic cards equipped with the playback
•
•
•
support function of H.264 video.
40
Connecting with a Computer
To enable MultiTouch control, Windows 7 and the display compatible to MultiTouch is
required.
For details, consult with the manufacturer of your computer.
For details on hardware requirements and customer support information, refer to the
following web site.
•
•
•
To start the supplied software
Preparation:
Turn on the camcorder and the computer.
Connect the camcorder to the computer. (P.39)
•
•
1
[Auto Play] window appears.
If [Auto Play] window does not appear, double-click the [PICSIO_APP] icon in [My
Computer] then double-click the LoiLoScope EX (LoiLoScopeEX.exe).
2
Select [LoiLoScope EX] and click [OK].
If [LoiLoScope EX] does not appear in the [Auto Play] window; select [Open folder
to view files], click [OK] and double-click the LoiLoScope EX (LoiLoScopeEX.exe)
icon in the window.
NOTE
For details about operations in LoiLoScope EX, see its Help.
•
For Mac Computer Users
You can import files from this unit to a computer using Apple's iMovie '09 (video) or
iPhoto (still image).
To verify the system requirements, select "About This Mac" from the Apple menu. You
can determine the operating system version, processor and amount of memory.
For the latest information on iMovie or iPhoto, refer to the Apple website.
For details on how to use iMovie or iPhoto, refer to the help file of the respective
software.
•
•
There is no guarantee that the operations will work with all computer environments.
•
41
Connecting with a Computer
Using an Eye-Fi Card
What is Eye-Fi?
Eye-Fi is an SD memory card with wireless LAN function.
Using an Eye-Fi card, you can transfer videos and still images to a computer or the web.
(An Internet accessible environment and a wireless LAN router are separately required.)
Use of Eye-Fi card may be illegal and prohibited in countries and regions where it has
not been approved by competent authorities. Please contact Eye-Fi support for the
details of approved countries and regions.
Types of cards
Product name
Video Transfer
Still Image Transfer
Eye-Fi Home/ Eye-Fi Share/
Eye-Fi Geo
–
Eye-Fi Share Video/
Eye-Fi Explore Video/ Eye-Fi Pro/
Eye-Fi Connect X2/ Eye-Fi Geo X2/
Eye-Fi Explore X2/ Eye-Fi Pro X2
Audio files cannot be transferred.
To use the Eye-Fi card
1
Make settings on the Eye-Fi card with Eye-Fi Center.
For how to install and operate the Eye-Fi Center, refer to its instruction manual.
2
Set the [Eye-Fi SETTING] to [ON] in the Basic Settings. (P.45)
When the [Eye-Fi SETTING] is set to [ON] recorded videos and still images are
automatically transferred.
•
(The files already transferred earlier are not transferred again.)
To abort Eye-Fi transfer, turn off the camcorder or set the [Eye-Fi SETTING] to [OFF] in
the Basic Settings.
To transfer selected videos and still images, see page 43.
The Eye-Fi Center with the default setting transfers all videos/still images.
Change the settings for the Eye-Fi Center beforehand to transfer selected videos/still
images.
•
•
NOTE
You cannot transfer files during the recording mode, editing and formatting of the
card.
You cannot transfer video files larger than 2 GB. (as of July, 2010)
Depending on the connection conditions, transfer may be interrupted or take time long
due to passing the Eye-Fi server, even if it is displayed that the transfer has been completed.
•
•
•
42
Connecting with a Computer
We recommend using the AC adapter (optional: AC-V10LU/JVC) when transferring
files of large size.
If it doesn't operate properly, first confirm that the settings of the Eye-Fi card are
correct and try the data transfer using other equipment.
Do not use the camcorder in places where wireless use is prohibited such as on a
plane.
For the latest information on the Eye-Fi card, refer to the website of Eye-Fi, Inc.
(http://www.eye.fi/).
•
•
•
•
To transfer selected videos/still images
Preparation:
Video/
Still image playback
1
Touch
.
Eye-Fi Setting [OFF]
Eye-Fi Setting [ON]
Ready for Transfer from the Eye-Fi card
Transferring from the Eye-Fi card (animated)
2
Touch the video/still image to transfer.
A check mark( ) appears on the selected video/still
TRANSFER SELECTION
image.
If you touch the video/still image with a check mark, the
selection is cancelled.
Touch [SEL ALL] to select all the video/still image files.
Touch [REL ALL] to cancel all the selection.
SEL ALL
REL ALL
SET
TRANSFER SELECTION
(
) appears on the transferred files.
SEL ALL
REL ALL
SET
3
4
Touch [SET].
Touch [SAVE] when the confirmation message appears.
43
Menu
Using the Menu
You can make various settings using the
menu.
4
Touch the item to set.
AUTO
480p
Basic Settings
1
Touch
Menu.
and display the Top
Touch
screen.
Touch
to return to the previous
to quit the setting.
Menu Settings (during Video/Still
Image recording)
2
3
Touch the Basic Settings button.
1
Video recording: Touch the Menu
Settings button.
Still image recording: Touch the
Effect button. (P.9)
The Basic Settings screen appears.
Touch the desired settings.
UPDATE
The Menu Settings screen appears.
PC SOFTWARE UPDATE
HDMI OUTPUT
Eye-Fi SETTING
2
Touch the item to set.
EFFECT
WIND CUT
Touch
to move to another page.
With every touch, the setting will
change.
Touch
to quit the setting.
44
Menu
Eye-Fi SETTING
Basic Settings
OFF:
indicates the default setting.
Does not transfer the files.
ON:
CLOCK ADJUST
CLOCK SETTING:
Resets the current time or changes the
settings.
AREA SETTING:
Transfers video/still image files
automatically.
TOUCH SCREEN ADJUST
Adjust if the reactive area of the screen is
misaligned with the touched area.
Sets to the local time when using this
unit abroad simply by selecting the
destination.
Menu Settings (during Video/Still
Image recording)
DST SETTING:
Sets whether daylight saving time is
observed at the travel destination.
EFFECT
OFF:
No effect.
MONOTONE:
Records in black and white.
SEPIA:
Gives images a brownish tint like old
photographs.
SOLARIZATION:
Records with some of the tones
reversed.
LANGUAGE
The language on the display can be
changed.
FORMAT SD CARD
FILE:
Deletes all files on the SD card.
FILE & MGMT NUMBER:
Deletes all the files on the SD card and
resets the folder and file numbers.
Not available for selection when no SD
card is inserted.
UPDATE
NEGATIVE:
•
Reverses the brightness.
CLASSIC FILM: (Video mode only)
Skips frames to give images of the effect
of an old video.
STROBE: (Video mode only)
Enables the image to look like a series of
consecutive snapshots by skipping
frames.
PC SOFTWARE UPDATE
Updates the functions of this unit and
built-in software for PC to the latest
versions. For details, refer to the JVC
website. (Details will be available only after
the [UPDATE] and [PC SOFTWARE UPDATE]
are ready.)
WIND CUT (Video mode only)
OFF:
HDMI OUTPUT
Does not reduce the noise.
ON:
Reduces the noise caused by wind.
AUTO:
It is recommended to select [AUTO]
normally.
480p:
Select this when the video is not output
in [AUTO] correctly.
45
Further Information
Troubleshooting
Before requesting service, consult the following chart. If the solutions indicated in the
chart do not solve the problem, consult your nearest JVC dealer or JVC service center
for instructions.
Refer also to the FAQ section on JVC’s website (http://www.jvc.com).
The following phenomena are not malfunctions.
LCD monitor momentarily becomes red or black when sunlight is recorded.
Black spots, or red, green, or blue spots appear on the LCD monitor.
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be
ineffective.)
•
•
The camera is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly. In such a case, reset the camcorder by pressing and holding the Power
button for more than 10 seconds. If you reset the camcorder, reset the clock. (P.18)
Troubles
Trouble
Action
Page
Recharge the battery.
14
15
•
•
When the battery level is extremely low, the
camcorder does not turn on until it is charged even
if it is connected to the computer or AC adapter.
Unable to turn on the
power.
Check the remaining battery power. (When the
battery is fully charged, the lamp does not flash.)
If you were charging the battery in a low or high
temperature environment, charge in an
environment within the allowable operating
temperature. (Charging may stop in an environment
out of the allowable operating temperature for the
protection of the battery.)
14, 15
–
•
•
Unable to charge the
battery.
When charging using the computer, turn on the
computer.
–
•
•
Please use a JVC AC adapter (optional: AC-V10LU).
(Depending on the AC adapter you use, battery will
deplete due to insufficient power supply from the
adapter.)
15
The battery depletes
even when connected
to AC adapter.
Please use a JVC AC adapter (optional: AC-V10LU).
15
•
Charging takes a long
time.
46
Further Information
Trouble
Action
Page
Recording video/still
image/audio cannot be
performed.
Check the video/still image/audio recording mode.
Select recording mode.
20, 33
20
•
•
Turn off the power, wait for a while, and start
recording again. (This unit stops automatically to
protect the circuit when the temperature rises.)
Recording stops automatically as it cannot be
performed for 12 or more consecutive hours
according to specifications.
–
–
•
Recording stops
automatically.
•
The continuous shooting speed will drop if this
function is used repeatedly.
Continuous shooting speed may drop depending
on the SD card or under certain recording
conditions.
–
–
•
•
The continuous
shooting speed of still
images is slow.
Sometimes playback is interrupted at the
connecting section between two scenes. This is not
a malfunction.
–
–
•
•
Sound or video is
interrupted.
The same image is
displayed for a long
time during video
playback, or motion is
choppy.
Replace the SD card with a new one.
Perform [FORMAT SD CARD] in Basic Settings. (All
data will be deleted.)
On the TV with aspect ratio of 4:3, images are
projected vertically.
–
Image is stretched up
and down on the TV.
•
Disconnect the HDMI mini cable and connect it
again.
Turn off and on this unit again. (The image or sound
may not appear on the TV properly depending on
the TV connected.)
–
•
•
When connecting to
the HDMI mini cable,
the image does not
appear on the TV
properly.
32
Connect the USB cable correctly.
Before copying files, make sure that enough free
space is left in the computer's hard disk (HDD).
39
–
•
•
Unable to copy files to
the computer's HDD.
Confirm and upgrade the OS of your computer.
13
•
The computer cannot
recognize the SDXC
card.
47
Further Information
Trouble
Action
Page
–
The LCD monitor may not be clearly visible if used in
bright areas such as under direct sunlight.
The LCD monitor is
difficult to see.
•
•
Change the direction of this unit to prevent the light
source from coming into view. (A band of bright
light may appear when there is a bright light source
near this unit, but this is not a malfunction.)
–
A band of bright light
appears on the LCD
monitor.
The unit operates
It is recommended that you copy all video/still
image/audio files onto your computer, and erase the
files from this unit. (If there are many recorded files
on this unit, it takes time for the unit to respond.)
30, 39
•
•
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
–
This is not a malfunction. (This unit may become
warm when used for a long time.)
The unit heats up.
Warning Indications
Indication
Action
Page
SET DATE/TIME!
Charge the battery before setting the clock.
18
•
Check the operating procedure, and perform once again.
Turn off this unit, and turn it on again.
45
–
•
FORMAT ERROR!
•
•
•
•
•
Turn off this unit, and turn it on again.
Re-insert the SD card.
Remove any dirt from the SD card terminals.
If the above does not solve the problem, back up your
files and execute [FORMAT SD CARD] in the Basic Settings.
(All data will be deleted.)
–
12
–
MEMORY CARD ERROR!
45
Select [OK] then select [YES] on the [DO YOU WANT TO
FORMAT MEMORY CARD?] screen. (All data will be
deleted.)
–
•
NOT FORMATTED
RECORDING FAILURE
Turn off this unit, and turn it on again.
–
–
•
•
Use files recorded with this unit. (Files recorded with
other devices than this unit may not be playable.)
UNSUPPORTED SCENE
(FILE)!
CHECK CARD'S WRITE
PROTECTION SWITCH
Release the write protection switch of the SD card.
–
•
Delete files, or move files to a computer or other devices.
Replace the SD card with a new one.
–
–
INSUFFICIENT
•
AVAILABLE SPACE
•
Move the files or folders to a computer or other
device. (Back up your files.)
39
!
FILE QUANTITY LIMIT
EXCEEDED
NUMBER OF FOLDERS
OVERFLOW
Select [FILE & MGMT NUMBR] in [FORMAT SD CARD]
of the Basic Settings. (All data on the SD card will be
deleted.)
45
#
48
Further Information
Specifications
Zoom
Camera
Digital zoom: Up to 4x
Power consumption
Video recording format
Video: Mpeg-4 AVC/H.264
Audio: AAC 48 kHz 16 bit
256 kbps (2ch)
2.2 W
Dimensions (W × H × D)
GC-WP10:
60 mm × 101 mm × 25 mm
(2-3/8" × 4" ×1")
GC-WP10: stereo sound
GC-FM2: monaural sound
GC-FM2
:
Still image recording format
JPEG standard
Continuous shooting speed:
approx. 1.5 shots/second
Audio recording format (GC-WP10 only)
Mpeg-1 Audio Layer 3 standard
Playable software:
Windows: LoiLoScope EX (supplied)
Mac: QuickTime
Recording media
SD/SDHC/SDXC card (commercially available)
Eye-Fi card (commercially available)
Connectors
HDMI
53 mm × 102 mm × 22 mm
(2-1/8" × 4-1/16" × 7/8")
Weight
GC-WP10:
147 g (0.33 lbs)
152 g (0.34 lbs) (Including hand
strap and SD card)
GC-FM2:
113 g (0.25 lbs)
115 g (0.26 lbs) (Including SD card)
Operating environment
Operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature:
–20 °C to 50 °C (–4 °F to 122 °F)
HDMI® mini connector
AV output
Operating humidity: 35 % to 80 %
Video output: 1.0 V (p-p), 75 Ω
Audio output:
GC-WP10: 300 mV (rms), 220 Ω
GC-FM2 : 300 mV (rms), 1 kΩ
Headphones output (GC-WP10 only.
Also serves as AV output.)
USB
GC-WP10:
Mini USB Type B, USB 2.0 compliant
GC-FM2 :
Image pickup device
1/3.2" 5,130,000 pixels (progressive CMOS)
Recording area (Video)
(HD 1080)
(HD 720)
2,090,000 pixels
3,400,000 pixels
(QHD, iFrame) 2,090,000 pixels
Recording area (Still Image)
(Portrait)
(Landscape)
5,030,000 pixels
2,760,000 pixels
Lens
F2.8, f=3.9 mm
35 mm conversion:
(HD 1080) f=43.6 mm
USB Type A, USB 2.0 compliant
Waterproof (GC-WP10 only)
Condition
Depth 3 m (10 ft)/30 minutes
Operation
Power on/off
(HD 720) f=34.2 mm
(QHD, iFrame) f=43.6 mm
(Still image: Portrait) f=29.8 mm
(Still image: Landscape) f=40.3 mm
Video recording/stop
Still image shooting
LCD monitor
3.0" diagonally measured,
LCD panel/TFT active matrix system
The specifications and appearance of this
product are subject to changes for further
improvement without prior notice.
•
49
Further Information
Approximate Time/Number of Recording
Approximate Video Recording Time
SDHC
Card
SDXC
Card
Type
HD 1080
HD 720
iFrame
QHD
Quality
4 GB
16 GB
64 GB
1920 × 1080
30 frames/second
(Average 12 Mbps VBR)
40 m
2 h 50 m
11 h 40 m
1280 × 720
60 frames/second
(Average 12 Mbps VBR)
40 m
20 m
2 h 50 m
1 h 20 m
6 h 40 m
11 h 40 m
5 h 50 m
27 h 30 m
960 × 540
30 frames/second
(Average 24 Mbps VBR)
960 × 540
30 frames/second
(Average 5 Mbps VBR)
1 h 40 m
The above recording time is approximate. The actual recording time may shorten
depending on the shooting environment.
•
Approximate Number of Still Images (Unit: Number of Shots)
SD
SDHC
Card
SDXC
Card
Recording mode
(Image size)
Card
1 GB
2 GB
4 GB
8 GB
32 GB
64 GB
Portrait
(2592 × 1944)
300
600
1300
2700
9999
9999
Landscape
(1440 × 1920)
600
1200
2300
4700
9999
9999
The above number of shots is approximate. The number of recordable still images
may be less depending on the scene to record.
•
50
Further Information
Approximate Audio Recording Time (GC-WP10 only)
SDHC
SDXC
Card
Card
Sound quality
4 GB
16 GB
64 GB
MP3 44.1 kHz
16 bit Stereo
66 h 40 m
135 h 40 m
1093 h
(128 kbps CBR)
The above recording time is approximate.
•
Approximate Recording Time (Using Battery)
Actual Recording
Time
Approximate
Charging Time
Continuous
Recording Time
Battery
When using the
computer:
3 h 00 m
Built-in Battery
40 m
1 h 20 m
When using the
AC adapter:
2 h 00 m
The actual recording time may be shorter if zooming is used or if recording is stopped
repeatedly.
When the battery life is reached, the recording time becomes shorter even if the
battery is fully charged.
•
•
51
Further Information
Customer Support Information
Use of this software is authorized according to the terms of the software license.
JVC
When contacting the nearest JVC office or agency in your country (refer to the JVC
Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index.html)
about this software, please have the following information ready.
Product Name, Model, Problem, Error Message
PC (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB/GB), Available Hard
Disk Space (GB))
•
•
Please note that it may take some time to respond to your questions, depending on
their subject matter.
JVC cannot answer questions regarding basic operation of your PC, or questions
regarding specifications or performance of the OS, other applications or drivers.
LoiLo inc
52
Index
A
M
A-B repeat . . . . . . . . . . . . . . . . . . . . . . .29, 35
Audio mode . . . . . . . . . . . . . . . . . . . . . . . . 33
Menu settings . . . . . . . . . . . . . . . . . . . . . . 45
O
B
Operation mode . . . . . . . . . . . . . . . . .28, 34
Basic settings . . . . . . . . . . . . . . . . . . . . . . . 45
Battery indicator . . . . . . . . . . . . . . . . . . . . 15
R
Recording in water . . . . . . . . . . . . . . . . . . 25
Recording mode . . . . . . . . . . . . . . . . . . . . 20
Recording time/number of recordable
still images . . . . . . . . . . . . . . . . . . . . . . . . . 50
C
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Clock adjust . . . . . . . . . . . . . . . . . . . . . . . . 18
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . 18
Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . .31, 38
S
SCREEN LOCK button . . . . . . . . . . . . . . . . 26
SD card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Self timer . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Size of still image . . . . . . . . . . . . . . . . . . . 22
Still image mode . . . . . . . . . . . . . . . . . . . . 20
D
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 37
E
T
Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
External audio file . . . . . . . . . . . . . . . . . . . 36
Eye-Fi card . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Time-lapse recording . . . . . . . . . . . . . . . 24
Touch AE . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Trimming . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
F
V
Face priority AE . . . . . . . . . . . . . . . . . . . . . 23
Folder number . . . . . . . . . . . . . . . . . . . . . . 36
Video image quality . . . . . . . . . . . . . . . . . 21
Video mode . . . . . . . . . . . . . . . . . . . . . . . . 20
Viewing on TV . . . . . . . . . . . . . . . . . . . . . . 32
I
Index screen/thumbnail display . . . . . 10
53
© 2010 Victor Company of Japan, Limited
0810YMH-AL-OT
US
|
