ENGLISH
CONTENTS
SAFETY PRECAUTIONS
2 – 4
PROVIDED ACCESSORIES
GETTING STARTED
5
6 – 11
Power ............................................ 6
Date/Time Settings ............................ 8
Loading/Unloading A Cassette ............... 9
Recording Mode Setting ..................... 10
Grip Adjustment .............................. 11
Viewfinder Adjustment ...................... 11
Shoulder Strap Attachment ................. 11
Tripod Mounting............................... 11
DIGITAL VIDEO CAMERA
GR-DVL45
GR-DVL40
GR-DVL25
GR-DVL20
RECORDING
12 – 28
Basic Recording ............................... 12
Advanced Features ........................... 17
PLAYBACK
29 – 35
Basic Playback ................................ 29
Advanced Features ........................... 30
Basic Connections ............................. 32
Advanced Connections ....................... 34
TAPE DUBBING
36 – 37
Tape Dubbing .................................. 36
Digital Dubbing ................................ 37
Please visit our CyberCam Homepage on the
World Wide Web and answer our Consumer
Survey (in English only):
USING THE REMOTE CONTROL
UNIT
38 – 48
Random Assemble Editing ................... 42
For More Accurate Editing ................... 46
Audio Dubbing ................................. 48
TROUBLESHOOTING
USER MAINTENANCE
CAUTIONS
49 – 53
54
55 – 57
INDEX
58 – 62
Controls, Connectors And Indicators ....... 58
Indications ..................................... 60
Terms ........................................... 62
SPECIFICATIONS
63
INSTRUCTIONS
LYT0445-001A
EN
EN3
NOTES:
●The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main
unit.
●The rating plate (serial number plate) of the AC Power Adapter/Charger is on its bottom.
This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for
playback with a television of a different standard. However, live recording and LCD monitor/viewfinder
playback are possible anywhere. Use the BN-V207U/V214U battery packs and, to recharge them, the
provided multi-voltage AC Power Adapter/Charger. (An appropriate conversion adapter may be necessary
to accommodate different designs of AC outlets in different countries.)
4
EN
SAFETY PRECAUTIONS
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as
lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying
or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the
unit, or in a malfunction.
Take care not to get your finger caught in the cassette cover. Do not let children operate the
camcorder, as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to
the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, Editing, DC, etc.) to the camcorder and leaving the unit
on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall,
resulting in damage.
Ⅲ This camcorder is designed exclusively for the digital video cassette. Only cassettes marked
can be used with this unit.
Before recording an important scene . . .
.... make sure you only use cassettes with the Mini DV mark
.
.... remember that this camcorder is not compatible with other digital video formats.
.... remember that this camcorder is intended for private consumer use only. Any commercial use
without proper permission is prohibited. (Even if you record an event such as a show, perform-
ance or exhibition for personal enjoyment, it is strongly recommended that you obtain permis-
sion beforehand.)
INFORMATION FOR GR-DVL25/
DVL20 OWNERS WITH A PC
This camcorder can transfer still images to a PC
using optional software (such as the HS-V4KIT).
PROVIDED ACCESSORIES
EN5
•CD-ROM (GR-DVL45/DVL40 only)
The CD ROM contains the following
5 software programmes:
T
W
• JLIP Video Capture
• JLIP Video Producer
Presto!
• Mr. Photo
• PhotoAlbum
• ImageFolio
•AC Power Adapter/
Charger AA-V20A or
AA-V20EA
•Remote Control
Unit RM-V711U
•PC Connection Cable
(GR-DVL45/DVL40 only)
•Battery Pack BN-V214U
or BN-V207U
•Shoulder Strap
•Editing Cable (GR-DVL45/
DVL40 owners: 4-pole –
2-pole. GR-DVL25/DVL20
owners: 2-pole – 2-pole)
•Lithium Battery CR2025
(for remote control unit)
•Audio/Video (A/V) Cable
[RCA plug to RCA plug]
•Core Filter
(for optional DV cable)
•Core Filter (for provided editing
cable or optional JLIP cable*)
•DC Cord
*GR-DVL45/DVL40 owners: Necessary for use
with the provided software.
GR-DVL25/DVL20 owners: Necessary for use
with optional software.
•S-Video Cable
How to Attach The Core Filter
Attach the provided Core Filter to the provided editing cable, optional DV cable or optional JLIP cable.
The Core Filter reduces interference.
3 cm
1
2
3
Editing cable and JLIP cable:
Wind once.
DV cable: Wind twice.
Stopper
1. Release the
stoppers on both
ends of the Core
Filter.
2. Run the cable through the Core Filter, leaving
approx. 3 cm of cable between the cable
plug and the Core Filter. Wind the cable
around the outside of the Core Filter as
shown in the illustration.
3.Close the Core Filter until it
clicks shut.
Connect the end of the cable
with the Core Filter to the
camcorder.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
GETTING STARTED
6
EN
Battery pack BN-V207U or BN-V214U
CHARGE indicator
Power
This camcorder’s 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
POWER indicator
CHARGING THE BATTERY PACK
Make sure you unplug the camcorder’s DC cord from
1
2
the AC Power Adapter/Charger. Plug the AC Adapter/
Charger’s power cord into an AC outlet. The POWER
indicator lights.
To AC outlet
AC Power
Remove the battery pack’s protective cap. Attach the
battery pack with its long groove pointing toward the
indicator side of the battery pack mount on the AC
Power Adapter/Charger. The CHARGE Indicator
begins blinking to indicate charging has started.
Adapter/Charger
AA-V20A or AA-V20EA
DC OUT connector
Battery pack
BN-V207U
BN-V214U
Charging time
approx. 1 hr. 30 min.
approx. 3 hrs.
When the CHARGE indicator stops blinking but stays
lit, charging is finished.
3
4
Slide the battery in the opposite direction of the arrow
and lift off. Remember to unplug the AC Adapter/
Charger’s power cord from the AC outlet.
NOTES:
● Perform charging where the temperature is between 10° and 35°C. 20° to 25°C is the ideal temperature
range for charging. If the environment is too cold, charging may be incomplete.
● Charging times noted above are for a fully discharged battery pack.
● Charging time varies according to the ambient temperature and the status of the battery pack.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the
camcorder and charging stops.
● Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
● When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may
not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.
● If the battery operation time remains extremely short even after having been fully charged, the battery is
worn out and needs to be replaced. Please purchase a new one.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause a
fire or explosion.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a short
circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion is vulnerable in colder
temperatures.
Lithium-ion battery packs are small but have a large power
capacity. However, when one is exposed to cold
temperatures (below 10° C), its usage time becomes
shorter and it may cease to function. If this happens, place
the battery pack in your pocket or other warm, protected
place for a short time, then re-attach it to the camcorder.
As long as the battery pack itself is not cold, it should not
affect performance.
(If you’re using a heating pad, make sure the battery pack
does not come in direct contact with it.)
EN7
USING THE BATTERY PACK
BATTERY RELEASE Switch
Hook the non-terminal end of the battery pack to the
1
camcorder
and push the battery pack in until it
.
locks in place
•If the battery pack is attached in the wrong position,
a malfunction may occur.
To Detach The Battery Pack . . .
.... slide BATTERY RELEASE and pull out the battery pack.
Approximate recording time
ATRED
Battery pack
BN-V207U
BN-V214U
LCD monitor on/
Viewfinder off
LCD monitor off/
Viewfinder on
B
Push in.
A
Hook on.
50 min.
(25 min.)
60 min.
(30 min.)
ENIGST
1 hr. 55 min.
(60 min.)
2 hrs. 20 min.
(1 hr. 10 min.)
BN-V856U
(optional)
7 hrs.
8 hrs. 30 min.
(4 hrs. 30 min.)
ATTENTION:
(4 hrs.)
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
(
) : when the video light is on (GR-DVL45/DVL40 only).
NOTES:
● Recording time is reduced significantly under the
following conditions:
•Zoom or Record-Standby mode is engaged repeatedly.
•The LCD monitor is used repeatedly.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
INFORMATION:
VU-V856KIT is a set composed of the BN-V856U battery
pack and AA-V80EG or AA-V80EA AC Power Adapter/
Charger.
Read the VU-V856KIT’s instruction manuals before using.
It is impossible to charge the BN-V856U battery pack
using the provided AC Power Adapter/Charger. Use the
optional AA-V80EG or AA-V80EA AC Power Adapter/
Charger.
To DC IN
connector
Core filter
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in
the illustration).
AC Power Adapter/Charger
AA-V20A or AA-V20EA
To AC outlet
NOTES:
●The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from 110 V
to 240 V.
DC cord
●For other notes, ੬ pg. 6.
To DC OUT connector
GETTING STARTED (cont.)
8
EN
Date/Time Settings
The date/time is recorded onto the tape at all times, but its
display can be turned on or off during playback
(੬ pg. 31).
MENU/BRIGHT
Dial
Set the Power Switch to “ ”. The power lamp lights
1
2
3
and the camcorder is turned on.
Press MENU/BRIGHT. The Recording Menu appears.
Move the highlight bar to “TO MODE MENU” by
rotating MENU/BRIGHT. Press it and the Mode Menu
appears.
Move the highlight bar to “TO DATE/TIME MENU”
by rotating MENU/BRIGHT. Press it and the Date/
Time Menu appears.
M
4
5
A
Power lamp
Move the highlight bar to “DATE/TIME” by rotating
MENU/BRIGHT. Press it and “day” is highlighted and
begins blinking.
Rotating MENU/BRIGHT, input the day. Press it.
Repeat to input the month, year, hour and minute.
Press MENU/BRIGHT twice when the highlight bar is
set to “RETURN” to exit.
Power Switch
Display
Recording Menu
FOCUS
AUTO
EXPOSURE
W. BALANCE
FADER
AUTO
AUTO
OFF
NOTE:
/ WIPE
P. AE
Even if you select “DATE/TIME”, if the parameter is not
highlighted the camcorder’s internal clock continues to
operate. Once you move the highlight bar to the first date/
time parameter (day), the clock stops. When you finish
setting the minute and press MENU/BRIGHT, the date and
time begin operation from the date and time you just set.
OFF
/ EFFECT
TO MODE MENU
4
END
Mode Menu
REC MODE
WIDE MODE
ZOOM
SP
OFF
64X
ON
DIS
GAIN UP
AGC
4
TO DATE / TIME MENU
TO SYSTEM MENU
END
DATE/TIME
Date/Time Menu
INDICATION
ON SCREEN
DISPLAY
ON
OFF
ON
25 . 12 . 99
16 : 40
4
DATE / TIME
RETURN
EN9
Erase protection
switch*
Loading/Unloading A Cassette
The camcorder needs to be powered up to load or eject a
cassette.
OPEN/EJECT Switch
Cassette holder
Press PUSH OPEN and open the LCD monitor.
1
Slide OPEN/EJECT in the direction of the arrow then
2
swing the cover open until it locks. The holder opens
automatically.
•Do not touch internal components.
ATRED
Insert or remove a tape and press “PUSH HERE” to
close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette cover.
3
PUSH OPEN
Button
Make sure the
window side is
facing out.
ENIGST
•When the battery’s charge is low, you may not be
able to close the cover. Do not apply force. Replace
the battery with a fully charged one before
continuing.
Cassette cover
PUSH HERE
Close the cassette cover firmly until it locks into
place. Close the LCD monitor.
4
Approximate recording time
* To Protect Valuable Recordings . . .
.... slide the erase protection switch on the
back of the tape in the direction of “SAVE”.
This prevents the tape from being recorded
over. To record on this tape, slide the
Recording mode
Tape
SP
LP
DVM-30
DVM-60
30 min.
60 min.
45 min.
90 min.
switch back to “REC” before loading it.
NOTES:
● It takes a few seconds for the cassette holder to open. Do not apply force.
● If you wait a few seconds and the cassette holder does not open, close the cassette cover and try again. If the
cassette holder still does not open, turn the camcorder off then on again.
● If the tape does not load properly, open the cassette cover fully and remove the cassette. A few minutes later,
insert it again.
● When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before
opening the cover.
● Closing the cassette cover before the cassette holder comes out may cause damage to the camcorder.
● Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is
closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on
before loading or unloading.
● When resuming recording after opening the cassette cover, a blank portion will be recorded on the tape or a
previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out
or not. See page 16 for information about recording from the middle of a tape.
GETTING STARTED (cont.)
10
EN
Recording Mode Setting
Set depending on your preference.
Set the Power Switch to “ ”. The power lamp lights
1
2
3
and the camcorder is turned on.
MENU/BRIGHT
Dial
Press MENU/BRIGHT. The Recording Menu appears.
Move the highlight bar to “TO MODE MENU” by
rotating MENU/BRIGHT. Press it and the Mode Menu
appears.
First move the highlight bar to “REC MODE” by
rotating MENU/BRIGHT. Press it and the parameter
“SP” or “LP” is highlighted. Select “SP” or “LP” by
rotating MENU/BRIGHT. Press it twice to exit from
the Recording Menu.
•Audio Dubbing is impossible on a tape recorded in
the LP mode.
4
M
A
Power lamp
•“LP” (Long Play) is more economical, providing
1.5 times the recording time.
Power Switch
Display
NOTES:
● If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
FOCUS
AUTO
Recording Menu
EXPOSURE
W. BALANCE
FADER
AUTO
AUTO
OFF
/ WIPE
P. AE
/ EFFECT
TO MODE MENU
OFF
4
4
END
Mode Menu
REC MODE
WIDE MODE
ZOOM
DIS
GAIN UP
SP
OFF
64X
ON
AGC
TO DATE / TIME MENU
TO SYSTEM MENU
END
4
REC MODE
SP
WIDE MODE
ZOOM
OFF
64X
ON
DIS
GAIN UP
AGC
TO DATE / TIME MENU
TO SYSTEM MENU
END
SP
SP
LP
Recording mode
indicator
EN11
Power Zoom Lever
Grip Adjustment
Separate the Velcro strip.
1
2
3
Pass your right hand through the loop and grasp the
grip.
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and the
Power Zoom Lever. Refasten the Velcro strip.
Recording
Start/Stop Button
ATRED
Viewfinder Adjustment
Dioptre
Adjustment
Control
ENIGST
Set the Power Switch to “ ” or “ ”.
1
2
The power lamp comes on and the camcorder is
turned on.
Slide the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Power Switch
Shoulder Strap Attachment
Following the illustration, thread the strap through the
1 eyelet 1, then fold it back and thread it through the
3
buckle 2. Repeat the procedure to attach the other
end of the strap to the other eyelet 3, making sure
the strap is not twisted.
1
4
2
Adjust as shown in the illustration 4.
2
Tripod Mounting
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
1
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilise the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
RECORDING Basic Recording
Shooting While Watching The
Viewfinder
12
EN
NOTE:
Recording
Start/Stop Button
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (੬ pg. 6)
● Load A Cassette (੬ pg. 9)
● Recording Mode Setting (੬ pg. 10)
● Grip Adjustment (੬ pg. 11)
● Viewfinder Adjustment (੬ pg. 11)
Power Switch
Make sure the LCD monitor is closed and locked.
1
Press in the tabs on the lens cap to remove it, then set
the Power Switch to “ ” or “ ”. The power lamp
lights and the camcorder enters the Record-Standby
mode. “PAUSE” is displayed in the viewfinder.
Display
25 min
During shooting
Press the Recording Start/Stop Button. “
” appears
2
3
in the viewfinder while recording is in progress.
Tape remaining time
indicator (Approximate)
Press the Recording Start/Stop Button again to stop
recording. The camcorder re-enters the Record-
Standby mode.
min
3 min
90 min
89 min
(Now calculating)
0 min
(Blinking)
1 min
(Blinking)
2 min
(Blinking)
Shooting While Watching The
LCD Monitor
90°
180°
MENU/
BRIGHT Dial
Before the following steps, perform the procedures listed
in the above note.
Make sure the LCD monitor is fully open. Press in the
1
tabs on the lens cap to remove it, then set the Power
Switch to “ ” or “ ”. The power lamp lights and
the camcorder enters the Record-Standby mode.
“PAUSE” is displayed in the LCD monitor.
Power Switch
Recording Start/Stop
Button
Tilt the LCD monitor upward/downward for best
2
3
viewability and press the Recording Start/Stop Button.
– – – – –6– – – – –
BRIGHT
“
” appears in the LCD monitor while recording is
in progress.
Press the Recording Start/Stop Button again to stop
recording. The camcorder re-enters the Record-
Standby mode.
To Adjust The Brightness Of The Display
.... rotate MENU/BRIGHT until the brightness
indicator on the display moves and the
appropriate brightness is reached.
•If you are using the GR-DVL45/DVL40, it is
also possible to adjust the brightness of the
viewfinder.
NOTE:
When you use the LCD monitor outdoors in direct
sunlight, the LCD monitor may be difficult to see. If this
happens, use the viewfinder instead.
EN13
NOTES:
Power Switch Position
● The image will not appear simultaneously in the LCD
monitor and the viewfinder.
(Full Auto mode):
● The cassette holder cannot be opened unless a power
supply is attached.
● There may be a delay after you open the cassette cover
until the holder opens. Do not use force.
● Once the cassette holder is closed, it recedes automati-
cally. Wait until it recedes completely before closing the
cassette cover.
Suitable for standard recording
using NO special effects or
manual adjustments. When set
to this mode, “F.AUTO”
appears.
(Manual mode):
● The time required to calculate and display the remaining
tape length, and the accuracy of the calculation, may
vary according to the type of tape used.
● “TAPE END” appears when the tape reaches its end, and
the power goes off automatically if left in this condition
for 5 minutes. “TAPE END” also appears when a cassette
at its end is loaded.
● If the Record-Standby mode continues for 5 minutes, the
camcorder’s power shuts off automatically. To turn the
camcorder on again, set the Power Switch to “OFF”,
then back to “ ” or “ ”.
Allows you to set recording
functions using the menus for
more creative capabilities.
When set to this mode,
M
A
“MANUAL” appears.
OFF:
Switches off the camcorder.
Setting to this position resets
Manual Focus and Exposure
Control to “AUTO”.
● When a blank portion is left between recorded scenes
on the tape, the time code is interrupted and errors may
occur when editing the tape. To avoid this, refer to
“Recording from the middle of a tape” (੬ pg. 16).
● Flicker may occur in the viewfinder.
PLAY:
Allows you to play back your
recordings.
EOCRDING
● During recording, sound is not heard from the speaker.
JOURNALISTIC SHOOTING
In some situations, different shooting angles may provide
more dramatic results. Hold the camcorder in the desired
position and tilt the LCD monitor in the most convenient
direction. It can rotate 270° (90° downward, 180°
upward).
Self-Recording
SELF-RECORDING
You can shoot yourself while viewing your own image in
the LCD monitor. Open the LCD monitor and tilt it
upward 180° so that it faces forward, then point the lens
toward yourself and start recording.
RECORDING Basic Recording (cont.)
14
EN
Zoom in (T: Telephoto)
FEATURE: Zooming
D
PURPOSE:
T
D
T
D
T
1X
To produce a zoom in/out effect, or an instantaneous
change in image magnification.
10X
D
T
W
16X
W
64X
W
OPERATION:
Zoom In
Slide the Power Zoom Lever towards “T”.
W
Zoom out (W: Wide angle)
Zoom display
Zoom Out
Slide the Power Zoom Lever towards “W”.
Ⅲ The harder you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
D
T
● Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
(੬ pg. 25), then zoom in or out in Record mode.
● In Full Auto mode (when the Power Switch is set to
Digital
zoom zone
16X
W
16X (optical)
zoom zone
“
”), zoom magnification of up to 64X is possible.
In Manual mode (when the Power Switch is set to
”), zooming is possible to a maximum of 450X,
Approximate zoom ratio
Power Zoom Lever
“
or 16X magnification offered by optical zoom.
● Zoom magnification of over 16X is done through
digital image processing, and is therefore called
Digital Zoom.
● During Digital Zoom, the quality of the image may
suffer.
● Digital Zoom cannot be used while functions done
through digital image processing (Picture Wipe/
Dissolve function, ੬ pg. 22, Video Echo,
੬ pg. 24, etc.) are activated.
● Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to “W”. See also “TELE MACRO” in
the System Menu on page 20.
Power Switch
EN15
FEATURE: Video Light (GR-DVL45/
DVL40 only)
PURPOSE:
To brighten the scene when natural lighting is too dim.
OPERATION:
Set LIGHT OFF/AUTO/ON as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on the
subject.
LIGHT OFF/AUTO/ON Switch
ON
: Always keeps the light on as long as the
camcorder is turned on.
Ⅲ The video light can only be used with the
camcorder’s power on.
Ⅲ It is recommended to set the white balance
(੬ pg. 28) to
when you use the video light.
DANGER
Ⅲ When not using the video light, turn it off to save
Ⅲ The video light can become
extremely hot. Do not touch it
either while in operation or
battery power.
NOTES:
● Even if the battery indicator (
soon after turning it off,
) does not blink
otherwise serious injury may result.
Ⅲ Do not place the camcorder into the
carrying case immediately after using the
video light, since it remains extremely
hot for some time.
Ⅲ When operating, keep a distance of
about 30 cm between the video light and
people or objects.
Ⅲ Do not use near flammable or explosive
materials.
Ⅲ It is recommended that you consult your
nearest JVC dealer for replacing the video
light.
due to low battery charge, the camcorder may turn
off automatically when you turn on the video light,
or when you start recording with the video light
turned on.
● When LIGHT OFF/AUTO/ON is set to “AUTO”:
•Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using LIGHT
OFF/AUTO/ON.
•While the “SHUTTER” mode (੬ pg. 24) is
engaged, the light is likely to stay on.
•While the “TWILIGHT” mode (੬ pg. 24) is
engaged, the light will not activate.
EOCRDING
RECORDING Basic Recording (cont.)
16
EN
NOTE: Recording From The Middle Of A Tape
Time Code
During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded
scene on the tape during playback.
If recording starts from a blank portion, the time code begins counting from “00:00:00”
(minute:second:frame). If recording starts from the end of a previously recorded scene, the time code
continues from the last time code number.
To perform Random Assemble Editing (੬ pg. 42 – 47), time code is necessary. If during recording a blank
portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time
code starts counting up again from “00:00:00”. This means the camcorder may record the same time
codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The
Middle of A Tape” below in the following cases;
•When shooting again after playing back a
recorded tape.
Display
•When power shuts off during shooting.
•When a tape is removed and re-inserted during
shooting.
•When shooting using a partially recorded tape.
•When shooting on a blank portion located
partway through the tape.
Time code is displayed
during playback.
Minutes
Seconds
TC 12 : 34 : 24
Frames
(25 frames = 1 second)
•When shooting again after shooting a scene
then opening/closing the cassette cover.
Recording From The Middle Of A Tape
1. Play back a tape to find the spot at which you want to start recording, then engage the Still Playback
mode (੬ pg. 29).
2. Set the Power Switch to “ ” or “ ”, then start recording.
NOTES:
● The time code cannot be reset.
● During fast-forwarding and rewinding, the time code indication does not move smoothly.
When a blank portion is recorded on a tape
Time code
00:00:00
Time code
05:43:21
Time code
00:00:00
Tape
Already recorded scene
Blank
Newly recorded scene
Shooting start point
Shooting stop point
Shooting start point
Proper recording
Time code
00:00:00
Time code
05:43:21
Time code
05:44:00
Tape
Already recorded scene
New scene
Latest scene
Shooting start point
Shooting start point
Shooting start point
RECORDING Advanced Features
EN17
Snapshot
SNAPSHOT
Button
Use your camcorder like a regular camera to take a
snapshot, or several of them in succession.
MODE Button
SNAPSHOT MODE SELECTION
Set the Power Switch to “ ” or “ ”.
1
2
Choose the appropriate Snapshot mode from the 5
available by repeatedly pressing MODE until the
Power Switch
Display
desired snapshot mode indicator appears.
SNAPSHOT RECORDING
Press SNAPSHOT.
1
If you press during Record-Standby . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
FULL
Snapshot mode
During snapshot
If you press during Recording . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 5 seconds, then normal
recording resumes.
PHOTO
EOCRDING
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to
serial photography. (Interval between still images: approx.
1 second)
NOTES:
● Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.
● If Snapshot recording is not possible, “PHOTO” blinks
when SNAPSHOT is pressed.
● Even if Programme AE with special effects (੬ pg. 24) is
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
PIN-UP
Pin-Up mode*
MULTI-4
Multi-Analyser 4
● During playback as well, all Snapshot modes are
available. The shutter sound is not heard.
● During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no defect in the recorded image.
FRAME
Snapshot mode with
frame*
MULTI-9
Multi-Analyser 9
* :There is a momentary
camera shutter-type
blackout together
with the sound effect
of a shutter closing,
which is recorded
together with the
image.
FULL
Snapshot mode with
no frame*
RECORDING Advanced Features (cont.)
18
EN
Using Menus For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
MENU/BRIGHT
Dial
Power Switch
Set the Power Switch to “ ”.
1
Press MENU/BRIGHT. The Recording Menu appears.
2
3
Display
Rotate MENU/BRIGHT to move the highlight bar to
the desired function.
4
FOCUS
MANUAL
Recording Menu
Mode Menu
EXPOSURE
W. BALANCE
FADER
AUTO
AUTO
OFF
•If the setting you want cannot be found in the Menu
Screen, place the highlight bar on “END”, then go
to step 7.
/ WIPE
P. AE
OFF
/ EFFECT
TO MODE MENU
END
Press MENU/BRIGHT. The setting procedure depends
on the function you select.
4
4
REC MODE
WIDE MODE
ZOOM
SP
OFF
64X
ON
If you select “FOCUS”, “EXPOSURE”,
DIS
GAIN UP
“W.BALANCE”, “FADER/WIPE” or “P.AE/EFFECT” . . .
.... see respective pages (FOCUS: ੬ pg. 25,
EXPOSURE: ੬ pg. 26, W.BALANCE: ੬ pg. 28,
FADER/WIPE: ੬ pg. 22, P.AE/EFFECT: ੬ pg. 24)
and do each procedure from step 4.
AGC
TO DATE
/
TIME MENU
TO SYSTEM MENU
END
DATE/TIME
If you select “TO MODE MENU” . . .
INDICATION
ON SCREEN
DISPLAY
ON
.... the Mode Menu appears. Go to step 5.
4
OFF
ON
25 . 12 . 99
16 : 40
DATE / TIME
Rotate MENU/BRIGHT to move the highlight bar to
the desired function and press it.
5
RETURN
If you select a function other than “TO DATE/TIME
MENU” or “TO SYSTEM MENU” . . .
.... its parameter starts blinking. Rotate MENU/
BRIGHT until the desired parameter appears. Go
to step 7.
Date/Time Menu
SYSTEM MENU
4
TELE MACRO
WIND CUT
OFF
OFF
SOUND MODE 32kHz
ID NUMBER
DEMO. MODE
06
OFF
If you select “TO DATE/TIME MENU” . . .
.... the Date/Time Menu appears. Go to step 6.
RETURN
System Menu
If you select “TO SYSTEM MENU” . . .
.... the System Menu appears. Go to step 6.
Rotate MENU/BRIGHT to move the highlight bar to
6
7
the desired function, then press it.
If you select “DATE/TIME” . . . ੬ pg. 8
If you select other functions . . .
.... rotate MENU/BRIGHT until the desired param-
eter appears, then press it. The highlight bar
automatically moves to “RETURN”. Go to step 7.
FOCUS
MANUAL
AUTO
AUTO
OFF
REC MODE
WIDE MODE
ZOOM
SP
EXPOSURE
W. BALANCE
FADER
OFF
64X
ON
DIS
/ WIPE
P. AE
/ EFFECT
TO MODE MENU
GAIN UP
TO DATE
AGC
OFF
/
TIME MENU
TO SYSTEM MENU
END
4
END
4
Press MENU/BRIGHT as many times as necessary to
return to the normal screen.
Normal Screen
EN19
Recording Menu Explanations
FOCUS
Refer to “Focusing” (੬ pg. 25).
Refer to “Exposure Control” and “Iris Lock” (੬ pg. 26, 27).
EXPOSURE
W.BALANCE
FADER/WIPE
P.AE/EFFECT
TO MODE MENU
Refer to “White Balance Adjustment” and “Manual White Balance Operation” (੬ pg. 28).
Refer to “Fade/Wipe Effects” (੬ pg. 22, 23).
Refer to “Programme AE With Special Effects” (੬ pg. 24).
Refer to “Mode Menu Explanations” below.
Mode Menu Explanations
REC MODE
WIDE MODE
Allows you to set the recording mode (SP or LP) depending on your preference (੬ pg. 10).
OFF
Select “OFF” when you want to use neither “SQUEEZE” nor “CINEMA”.
SQUEEZE
For playback on TVs with an aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion.
appears. When using this
mode, refer to your wide-screen TV’s instruction manual. During playback/
recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated
vertically.
CINEMA
Inserts black bands at the top and bottom of the screen. During playback on
wide-screen TVs, the black bands at the top and bottom of the screen are cut
and the screen ratio becomes 16:9. When using this mode, refer to your
wide-screen TV’s instruction manual. During playback/recording on 4:3 TVs/
LCD monitor/viewfinder, black bands are inserted at the top and bottom of
the screen and the image appears like a letterboxed 16:9 movie.
EOCRDING
ZOOM
16X
64X
When set to “16X” while using Digital Zoom, the zoom magnification will
reset to 16X since Digital Zoom will be disengaged.
Allows you to use the Digital Zoom. By digitally processing and magnifying
images, zooming is possible from 16X (the optical zoom limit), to a
maximum of 64X digital magnification.
450X
ON
Allows you to use the Digital Zoom. By digitally processing and magnifying
images, zooming is possible from 16X (the optical zoom limit), to a
maximum of 450X digital magnification.
DIS
To compensate for unstable images caused by camera-shake, particularly at
high magnification.
NOTES:
● Accurate stabilisation may not be possible if hand shake is excessive, or
under the following conditions:
•When shooting subjects with vertical or horizontal stripes.
•When shooting dark or dim subjects.
OFF
•When shooting subjects with excessive backlighting.
•When shooting scenes with movement in various directions.
•When shooting scenes with low-contrast backgrounds.
● Switch off the Digital Image Stabiliser (DIS) when recording with the
camcorder on a tripod.
● The “
” indicator appears blinking if the Stabiliser cannot be used.
GAIN UP
This is automatically activated during Full Auto mode. The overall appear-
ance may be grainy, but the image is bright.
AGC
AUTO
The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting a
subject in low or poor lighting at 1/25 sec. shutter speed provides a brighter
image than in the AGC mode, but the subject’s movements are not smooth
or natural. When set to this mode, “
” is displayed.
OFF
Allows you to shoot dark scenes with no picture brightness adjustment.
TO DATE/TIME MENU Refer to “Date/Time Menu Explanations” (੬ pg. 20).
TO SYSTEM MENU Refer to “System Menu Explanations” (੬ pg. 20).
CONTINUED ON NEXT PAGE
: Factory preset
RECORDING Advanced Features (cont.)
20
EN
Date/Time Menu Explanations
INDICATION
ON
Makes all the indications appear in the camcorder (੬ pg. 21).
OFF
Keeps all the indications (except the tape running indicator, warnings,
etc.) from appearing in the camcorder (੬ pg. 21).
*
ON SCREEN
OFF
ON
Keeps the camcorder’s display from appearing on the connected TV
screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
DISPLAY
ON
Makes the date/time settings appear in the camcorder (੬ pg. 21).
OFF
Keeps the date/time settings from appearing in the camcorder.
DATE/TIME
Allows you to set the current date and time (੬ pg. 8).
* You can also change “ON SCREEN” to “ON” or “OFF” by pressing the DISPLAY button on the RM-V711U
remote control.
System Menu Explanations
TELE MACRO
OFF
Usually the distance to a subject where the lens is in focus depends on
the zoom magnification. Unless there is a distance more than 1m to the
subject, the lens is out of focus at the maximum telephoto setting. When
set to “ON”, you can shoot a subject as large as possible at a distance of
approx. 60 cm.
ON
•Depending on the zoom position, the lens may go out of focus.
WIND CUT
Disengages the function which cuts down on noise created by wind.
Helps cut down on noise created by wind.
OFF
ON
•“
” appears.
•The quality of the sound will change. This is normal.
SOUND MODE
Enables recording of stereo sound on four separate channels, and is
recommended for use when performing audio dubbing.
32 kHz
48 kHz
Enables recording of stereo sound on two separate channels.
ID NUMBER
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting
is 06.
DEMO. MODE
Automatic demonstration will not take place.
OFF
ON
Demonstrates certain functions such as Programme AE with special
effects, etc., and can be used to confirm how these functions operate.
When “DEMO. MODE” is set to “ON” and the Recording Menu is
closed, demonstration starts.
NOTES:
●If a tape is in the camcorder, the demonstration cannot be turned on.
●By turning off the camcorder, “DEMO. MODE” is set to “OFF”
automatically.
: Factory preset
EN21
MENU/BRIGHT Dial
Date/Time Display During Recording
You should already have set the date and time (“Date/Time
Settings”, ੬ pg. 8).
Set the Power Switch to “ ”.
1
Press MENU/BRIGHT. The Recording Menu appears.
2
3
Move the highlight bar to “TO MODE MENU” by
rotating MENU/BRIGHT. Press it and the Mode Menu
appears.
Power Switch
Move the highlight bar to “TO DATE/TIME MENU”
by rotating MENU/BRIGHT. Press it and the Date/
Time Menu appears.
4
NOTES:
● The Date/Time is always displayed when the
Power Switch is set to “ ”.
Move the highlight bar to “DISPLAY” by rotating
5
6
MENU/BRIGHT, then press it.
● Connect the camcorder to a TV and set “ON
SCREEN” to “ON” in the Date/Time Menu.
The display appears on the connected TV .
● Even if “ON SCREEN” is set to “ON”, the
indications are removed from the TV if
“INDICATION” is set to “OFF”.
Move the highlight bar to “ON” or “OFF” by rotating
MENU/BRIGHT. Press it and the highlight bar
automatically moves to “RETURN”.
EOCRDING
Press MENU/BRIGHT twice. Selection is complete
and the menu disappears.
7
LCD Monitor/Viewfinder Indications
You can make the LCD monitor/Viewfinder indications
appear/disappear.
Before the following steps, perform steps 1 through 4
above.
Move the highlight bar to “INDICATION” by rotating
5
6
MENU/BRIGHT, then press it.
NOTES:
Rotate MENU/BRIGHT to display the desired setting.
OFF: To make the indications disappear.
ON : To make the indications appear.
Then press it and the highlight bar automatically
moves to “RETURN”.
● It is impossible to make the tape running
indicator “444”, warnings, etc. disappear
from the LCD monitor or the viewfinder. For
indications that can be removed, ੬ pg. 60.
● If “INDICATION” is set in the Date/Time
Menu, “INDICATION” in the Playback Menu
will also be set to the same setting
(੬ pg. 31).
Press MENU/BRIGHT twice. Selection is complete
and the menu disappears.
7
RECORDING Advanced Features (cont.)
22
EN
FADE/WIPE SELECTION (
,
,
)
,
,
Fade/Wipe Effects
,
,
,
,
,
and
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next. You can also vary
transitions from scene to scene.
Fade or Wipe works when recording is started or when
you stop recording.
Set the Power Switch to “ ”.
IMPORTANT:
1
Some Fade/Wipe Effects cannot be used with
certain modes of Programme AE with special
effects (੬ pg. 24). If an unusable Fade/Wipe
Effect is selected, its indicator blinks.
Press MENU/BRIGHT. The Recording Menu appears.
2
3
4
Rotate MENU/BRIGHT to move the highlight bar to
“FADER/WIPE”, then press it.
MENU/BRIGHT Dial
Rotate MENU/BRIGHT to move the highlight bar to
the desired function, then press it.
•The FADER/WIPE Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
Power Switch
Press the Recording Start/Stop Button to activate the
Fade-in/out or Wipe-in/out.
5
PICTURE WIPE OR DISSOLVE SELECTION
and
(
,
,
,
,
,
)
The Picture Wipe or Dissolve works when recording is
started.
Recording Start/Stop Button
Follow steps 1 through 4 above.
1
Engage the Record-Standby mode.
2 If you select Picture Wipe/Dissolve during
recording . . .
.... press the Recording Start/Stop Button when one
scene is finished. The point at which the scene
ended is stored in memory.
If you select Picture Wipe/Dissolve during Record-
Standby mode . . .
.... press the Recording Start/Stop Button to start
recording and press it again when one scene is
finished. The point at which the scene ended is
stored in memory.
NOTES:
● You can extend the length of a Fade or Wipe
by pressing and holding the Recording Start/
Stop Button.
● If the power is turned off after a scene is
finished recording, the stored point is erased,
disabling the Picture Wipe/Dissolve combina-
tion. When this happens, the Picture Wipe/
Dissolve indicator blinks. Also note that
power shuts off automatically if 5 minutes
elapse in the Record-Standby mode.
● The sound at the end of the last recorded
scene is not stored.
If you select Picture Wipe/Dissolve during Record-
Standby mode after performing a Picture Wipe/
Dissolve . . .
.... the point at which the scene ended is already
stored in memory.
If you start recording a new scene within 5 minutes of
3
the end of the previous recording (without having
turned the camcorder’s power off), the previous scene
wipes out, revealing the new scene.
EN23
Fader And Wipe Menu
Menu
Effect
Fade in or out with a white screen.
FADER — WHITE
FADER — BLACK
FADER — MOSAIC
FADER — B.W
Fade in or out with a black screen.
Fade in or out with a full-screen mosaic effect.
Fade in to a colour screen from a black and white screen, or fade out
from colour to black and white.
Wipe in on a black screen from the upper right to the lower left
corner, or wipe out from lower left to upper right, leaving a black
screen.
WIPE — CORNER
The scene starts in the centre of a black screen and wipes in toward
the corners, or comes in from the corners, gradually wiping out to the
centre.
WIPE — WINDOW
WIPE — SLIDE
Wipe in from right to left, or wipe out from left to right.
EOCRDING
Wipe in as the two halves of a black screen open to the left and right,
revealing the scene, or wipe out and the black screen reappears from
left and right to cover the scene.
WIPE — DOOR
The scene wipes in from the bottom to the top of a black screen, or
wipes out from top to bottom, leaving a black screen.
WIPE — SCROLL
WIPE — SHUTTER
Wipe in from the centre of a black screen toward the top and bottom,
or wipe out from the top and bottom toward the centre leaving a
black screen.
The new scene gradually appears as the old one gradually disappears.
DISSOLVE
The new scene wipes in over the previous one from the upper right
corner to the lower left corner.
WIPE — CORNER
WIPE — WINDOW
WIPE — SLIDE
WIPE — DOOR
WIPE — SCROLL
WIPE — SHUTTER
The next scene gradually wipes in from the centre of the screen
toward the corners, covering the previous scene.
The next scene gradually wipes in over the previous one from right to
left.
The previous scene wipes out from the centre to the right and left, like
a door being pushed open to reveal the next scene.
The new scene wipes in over the last one from the bottom of the
screen to the top.
The new scene wipes in over the previous one from the centre toward
the top and bottom of the screen.
When this function is activated, the camcorder randomly selects the
effect used in scene transition (from
,
,
,
,
,
,
RANDOM
,
,
, and ). The Picture Wipe/Dissolve function is not
available.
RECORDING Advanced Features (cont.)
24
EN
IMPORTANT:
Programme AE With Special Effects
Some modes of Programme AE with special
effects cannot be used with certain Fade/Wipe
Effects (੬ pg. 23). If an unusable mode is
selected, its indicator blinks.
Set the Power Switch to “ ”.
1
Press MENU/BRIGHT. The Recording Menu appears.
2
3
4
Rotate MENU/BRIGHT to move the highlight bar to
MENU/BRIGHT
Dial
“P.AE/EFFECT”, then press it.
Power Switch
Move the highlight bar to the desired mode by
rotating MENU/BRIGHT, then press it.
The P.AE/EFFECT Menu disappears and the selected
mode is activated. The selected mode indicator
appears.
Display
To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to “OFF”
by rotating MENU/BRIGHT. Then press it.
P. AE / EFFECT
5
1/500
SHUTTER 1/500
TWILIGHT
SEPIA
PAUSE
B/W
MONOTONE
CLASSIC FILM
STROBE
NOTE:
SEL.
4
Programme AE with special effects can be changed during
recording or during Record-Standby.
1
SLOW 4X
P.AE/EFFECT Menu
SHUTTER (Variable Shutter Speed)
CLASSIC FILM
1/50–The shutter speed is fixed at 1/50th of a
second. Black bands that usually appear when
shooting a TV screen become narrower.
1/100–The shutter speed is fixed at 1/100th of a
second. The flickering that occurs when shooting
under a fluorescent light or mercury-vapour lamp
is reduced.
Gives recorded scenes a strobe effect.
STROBE
Your recording looks like a series of consecutive
snapshots.
SLOW (Slow Shutter)
You can light dark subjects or areas even brighter
than they would be under good natural lighting.
1/250, 1/500–These settings allow fast-moving
images to be captured one frame at a time, for
vivid, stable slow-motion playback. The faster the
shutter speed, the darker the picture becomes. Use
the shutter function under good lighting condi-
tions.
SLOW 4X
The Shutter Speed is set to 1/12.5th of a second to
quadruple the sensitivity.
SLOW 10X
The Shutter Speed is set to 1/5th of a second to
provide 10 times the sensitivity.
TWILIGHT
Makes evening scenes look more natural.
NOTES:
White Balance (੬ pg. 28) is initially set to
,
● When using “SLOW”, the image takes on a
strobe-like effect.
but can be changed to your desired setting. When
Twilight is chosen, the camcorder automatically
adjusts the focus from approx. 10 m to infinity.
From less than 10 m, adjust the focus manually.
● Use “SLOW” only in dark areas.
● The Manual Focus indication may appear and
flash when “SLOW” is in use.
● If the image is out of focus, adjust manually. It is
also recommended that you use a tripod, if
possible.
SEPIA
Recorded scenes have a brownish tint like old
photos. Combine this with the Cinema mode for a
classic look.
VIDEO ECHO
Adds a “ghost” to the subject, giving your
recording a “fantasy” feeling.
MONOTONE
Like classic black and white films, your footage is
shot in B/W. Used together with the Cinema
mode, it enhances the “classic film” effect.
EN25
Focus detection zone
Focusing
AUTO FOCUS
The camcorder’s Full Range AF system offers continuous
shooting ability from close-up (as close as approx. 5 cm to
the subject) to infinity. However, correct focus may not be
obtainable in the situations listed below (in these cases use
manual focusing):
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in bright-
ness and darkness), such as a flat, one-colour wall, or a
clear, blue sky.*
•When a dark object is barely visible in the viewfinder.*
•When the scene contains minute patterns or identical
patterns that are regularly repeated.
•When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
•When shooting a scene with a high-contrast
background.
NOTES:
● If the lens is smeared or blurred, accurate
focusing is not possible. Keep the lens clean,
wiping with a piece of soft cloth if it gets
dirty. When condensation occurs, wipe with
a soft cloth or wait for it to dry naturally.
● When shooting a subject close to the lens,
zoom out first (੬ pg. 14). If zoomed-in in
the auto focus mode, the camcorder may
automatically zoom out depending on the
distance between the camcorder and the
subject. This will not occur when “TELE
MACRO” (੬ pg. 20) is activated.
* The following low-contrast warnings appear blinking:
,
,
and
MANUAL FOCUS
EOCRDING
If you are using the viewfinder, you should already have
made the necessary viewfinder adjustments (੬ pg. 11).
MENU/BRIGHT
Dial
Set the Power Switch to “ ”.
1
Power Switch
Press MENU/BRIGHT. The Recording Menu appears.
2
3
4
Rotate MENU/BRIGHT to move the highlight bar to
“FOCUS”, then press it.
FOCUS
FOCUS
Rotate MENU/BRIGHT to display “MANUAL”, then
press it. The Recording Menu disappears and
“FOCUS” is displayed in the upper left corner. The
focus is locked at this point.
To focus on a farther subject, rotate MENU/BRIGHT
5
6
downward. “ ” appears and blinks.
To focus on a nearer subject, rotate MENU/BRIGHT
upward. “ ” appears and blinks.
NOTES:
Press MENU/BRIGHT. Focus adjustment is complete.
The indication changes from “FOCUS” to
“MANUAL”.
● When the power is turned off, Manual Focus
will be reset to “AUTO”.
● Be sure to focus the lens in the maximum
telephoto position when you use the Manual
Focus mode. If you focus in on a subject in
the wide-angle position, sharply focused
images cannot be obtained when zoomed up
because the depth-of-field is reduced at
longer focal lengths.
•If you want to reset the focus, repeat from step 2.
To Change To Auto Focus . . .
.... rotate MENU/BRIGHT to display “AUTO” then press
it in step 4. The manual focus indicators disappear. Or,
set the Power Switch to “ ”.
● When the focus level cannot be adjusted
any further or closer, “ ” or “ ” will blink.
RECORDING Advanced Features (cont.)
26
EN
MENU/BRIGHT Dial
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override it and make
the adjustment manually. Manual exposure adjustment is
recommended in the following situations:
•When shooting using reverse lighting or when the
background is too bright.
•When shooting on a reflective natural background such
as at the beach or when skiing.
•When the background is overly dark or the subject light.
Set the Power Switch to “ ”.
1
Power Switch
Press MENU/BRIGHT. The Recording Menu appears.
2
3
4
Rotate MENU/BRIGHT to move the highlight bar to
EXP.
6
To darken
the image
“EXPOSURE”, then press it.
Rotate MENU/BRIGHT to display “MANUAL”, then
press it. The Recording Menu disappears. “EXP.” and
the highlight bar on the exposure control indicator
are displayed.
To brighten the image, rotate MENU/BRIGHT
downward. The exposure control indicator increases
(maximum +6).
EXP.
0
5
To darken the image, rotate MENU/BRIGHT upward.
The exposure control indicator decreases (maximum
–6).
Press MENU/BRIGHT. Exposure adjustment is
complete. The indication “EXP.” changes to
“MANUAL” and the highlight bar on the exposure
control indicator goes out.
EXP.
6
6
•If you want to reset the exposure, repeat step 2.
To brighten
the image
To Return To Automatic Exposure Control . . .
.... rotate MENU/BRIGHT to display “AUTO” then press
it in step 4. The exposure control indicator disappears.
Or, set the Power Switch to “ ”.
Exposure control indicator
NOTE:
When the power is turned off, Exposure Control will be
reset to “AUTO”.
EN27
Iris Lock
MENU/BRIGHT Dial
Use this function in the following situations:
● When shooting a moving subject.
● When the distance to the subject changes (so its size in
the LCD monitor or the viewfinder changes), such as
when the subject is backing away.
● When shooting on a reflective natural background such
as at the beach or when skiing.
● When shooting objects under a spotlight.
● When zooming.
When the subject is close, keep the iris locked. Even when
the subject moves away from you, the image will not
darken or brighten.
Before the following steps, perform steps 1 through 4
(੬ pg. 26).
Power Switch
Adjust zoom so that the subject fills the LCD monitor
5
or the viewfinder, then press and hold MENU/
BRIGHT for over 2 seconds. The exposure control
indicator and “ ” appear, indicating that the iris is
locked.
EXP.
0 L
Press MENU/BRIGHT. The indication displayed in
the upper left corner changes from “EXP.” to
“MANUAL”.
EOCRDING
To Return To Automatic Iris Control . . .
Iris lock indicator
.... rotate MENU/BRIGHT to display “AUTO” then press
it in step 4. The exposure control indicator and “
disappear. Or, set the Power Switch to “ ”.
”
To Lock The Exposure Control And The Iris . . .
.... after step 4, adjust the exposure rotating MENU/
BRIGHT. Then lock the iris in step 5. For automatic
locking, rotate MENU/BRIGHT to display “AUTO”,
then press it in step 4. The iris becomes automatic
after about 2 seconds.
Iris
Like the pupil of the human eye, it contracts in well-lit
environments to keep too much light from entering, and
dilates in dim environments to allow in more light.
RECORDING Advanced Features (cont.)
28
EN
White Balance Adjustment
Manual White Balance Operation
A term that refers to the correctness of colour
reproduction under various lighting. If the white
balance is correct, all other colours will be accu-
rately reproduced.
The white balance is usually adjusted automatically.
However, more advanced camcorder operators
control this function manually to achieve a more
professional colour/tint reproduction.
Perform Manual White Balance when shooting under
various types of lighting.
Follow steps 1 through 5 of the white balance
1
2
adjustment, and select “
MAN.”.
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that
the white paper fills the screen.
Set the Power Switch to “ ”.
1
Press MENU/BRIGHT until
When the setting is completed,
blinking.
begins blinking.
stops
3
4
Press MENU/BRIGHT. The Recording Menu
2
3
4
appears.
Press MENU/BRIGHT. The indication “W.BAL.”
Rotate MENU/BRIGHT to move the highlight
bar to “W.BALANCE”, then press it.
changes to “MANUAL” and only the Manual
White Balance indicator
is displayed.
The Recording Menu disappears. “W.BAL.”
appears in the upper left corner and the
currently selected mode indication is also
displayed.
MENU/BRIGHT Dial
Rotate MENU/BRIGHT to display the desired
5
setting.
“AUTO” – White balance is adjusted automati-
cally (factory preset).
“
“
“
“
” – White balance is set manually.
” – Outdoors on a sunny day.
” – Outdoors on a cloudy day.
” – A video light or similar type of lighting
is used.
White paper
Power Switch
Press MENU/BRIGHT again. Selection is
complete. The indication “W.BAL.” changes to
“MANUAL”.
6
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white.
The white balance is adjusted based on the
colour, changing the tint. Red paper = deeper
green; blue paper = orange; yellow paper =
deeper purple.
To Return To Automatic White Balance . . .
.... select “AUTO” in step 5. Or, set the Power
Switch to “ ”.
NOTE:
White balance cannot be used when Sepia or
Monotone (੬ pg. 24) is activated.
NOTES:
● In step 2, it may be difficult to focus on the white
paper. In such a case, adjust focus manually
(੬ pg. 25).
● A subject can be shot under various types of
lighting conditions indoors (natural, flourescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
● Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
PLAYBACK Basic Playback
Power Zoom Lever (VOL.)
EN29
Load a tape (੬ pg. 9).
1
2
Set the Power Switch to “
press 4/6.
”. To start playback,
Power lamp
•To stop playback, press 5.
•Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards “+” to
turn up the volume, or towards “–” to turn down the
volume.
Power Switch
Speaker
Rewind Button
Fast-Forward Button
Play/Pause Button
Stop Button
Still Playback: Pauses during playback.
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
YABCK
PAL
● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still
image. During this time, if PAUSE (6) on the remote control is pressed, Slow-Motion Playback will
start. This is not a malfunction.
Shuttle Search: Allows high-speed search in either direction.
1) Press
3
for forward or
2
for reverse search during playback.
2) To resume normal playback, press 4/6.
● During playback, press and hold
2
or 3. The search continues as long as you hold the button.
Once you release it, normal playback resumes.
● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and
Playback Special Effects
Available only with the RM-V711U remote control (provided) (੬ pg. 40, 41).
NOTES:
● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to “OFF”, then to “
”.
● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (੬ pg. 32, 33).
● You can also view the playback picture on the LCD monitor with it flipped over and retracted.
● LCD monitor/viewfinder indications:
•When power is supplied from a battery: the “
When power is supplied through the DC cord: “
” battery pack remaining power indicator is displayed.
” does not appear.
•During Stop mode, none of the indications are displayed.
● Copyguarded tapes cannot be played back. Only a blue screen is displayed.
PLAYBACK Advanced Features
30
EN
MENU/BRIGHT Dial
Playback Menu
The Playback Menu allows you to set the following
functions:
Playback Sound (32 kHz, 48 kHz), Synchro Comp,
Indication, Display and Time Code. The following
procedure applies to all except Synchro Comp (੬ pg. 46,
47).
Set the Power Switch to “
”.
1
2
3
4
Press MENU/BRIGHT. The Playback Menu appears.
Power Switch
Move the highlight bar to the desired function by
rotating MENU/BRIGHT. Press it to activate.
Rotate MENU/BRIGHT to display the desired setting.
Then press MENU/BRIGHT, and the highlight bar
automatically moves to “END”.
•To set parameters for other functions, repeat steps 3
and 4.
Display
Playback Menu
4
48kHz MODE
32kHz MODE
SYNCHRO
INDICATION
DISPLAY
TIME CODE
FULL SOUND
SOUND1
0 . 0
ON
ON
OFF
Press MENU/BRIGHT again. The menu disappears.
5
END
FULL SOUND
SOUND1
48kHz MODE
32kHz MODE
SYNCHRO
INDICATION
DISPLAY
TIME CODE
FULL SOUND
SOUND1
0 . 0
SOUND2
FULL SOUND
SOUND1
SOUND2
ON
ON
OFF
ON
OFF
4
END
ON
OFF
ON
OFF
EN31
Playback Sound
During playback, the camcorder detects the sound mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your playback picture. (32 kHz is preset to “SOUND 1”
and 48 kHz is preset to “FULL SOUND”.)
Recording sound
Display
FULL SOUND
SOUND 1
Output sound
32 kHz
Stereo sound
Stereo sound
SOUND 2
FULL SOUND
SOUND 1
48 kHz
“L” sound is output on both channels
“R” sound is output on both channels
SOUND 2
If you want to change the output sound of a tape recorded at 32 kHz, access the Playback Menu and, in step 3
on page 30, select “32 kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or “SOUND 2”. For tapes
recorded at 48 kHz, set in the same manner.
NOTES:
● You can also use the provided RM-V711U remote control’s AUDIO MONITOR button to change the output
sound (without having to access the Playback Menu). Make sure you point the remote control at the
camcorder’s remote sensor.
● The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
YABCK
INDICATION
PAL
Display
You can make the playback sound, time code and date indications disappear.
This function overrides the “TIME CODE” and “DISPLAY” settings in the Playback
32kHz/SOUND1
Menu. To change this setting, select “INDICATION” in the Playback Menu
(੬ pg. 30).
OFF– The playback sound, time code and date indications do not appear on the
Playback Screen.
25 . 12 . 99
ON– The playback sound, time code and date indications are displayed
TC 12 : 34 : 24
16 : 40
according to how “TIME CODE” and “DISPLAY” are set in the Playback
Menu (factory preset).
NOTE:
If “INDICATION” is set in the Date/Time Menu, “INDICATION” in the Playback
Menu will also be set to the same setting (੬ pg. 18, 20).
DISPLAY (Displaying the Date During Playback)
If the time has been set, the date is automatically recorded separately from the
recorded video signal. You can display or remove the date anytime during
playback. To change this setting, select “DISPLAY” in the Playback Menu
(੬ pg. 30).
25 . 12 . 99
16 : 40
ON– The date is displayed on the playback screen (factory preset).
OFF– The date is not displayed.
TIME CODE (Displaying The Time Code During Playback)
You can display the time code on screen during playback. This is especially useful
for editing. To change this setting, select “TIME CODE” in the Playback Menu
(੬ pg. 30).
TC 12 : 34 : 24
ON– The time code is displayed on the playback screen.
OFF– The time code does not appear (factory preset).
Minutes Seconds
Frames*
*25 frames = 1 second
PLAYBACK Basic Connections
32
EN
These are some basic types of connections. When making the connections, refer also to your VCR and TV
instruction manuals.
A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input (RCA type) connectors
Yellow:
Not connected
Yellow:
Not connected
TV
To TV or VCR
VCR
White to
Audio Output L
White to
AUDIO L IN
A/V cable (provided)
[RCA plug to RCA plug]
Red to Audio
Output R
Red to
AUDIO R IN
The connectors
are located beneath
the cover.
S-Video cable
(provided)
To S-Video Output
To S-VIDEO IN
B. Connection to a TV or VCR equipped only with A/V input connectors
A/V cable (provided)
[RCA plug to RCA plug]
TV
Yellow to
Video Output
White to
AUDIO L IN
To TV or VCR
VCR
White to
Audio Output L
Red to
AUDIO R IN
Red to Audio Output R
Yellow to
VIDEO IN
The connectors are
located beneath the cover.
EN33
NOTES:
Make sure all units are turned off.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (੬ pg. 7).
1
2
Connect the camcorder to a TV or VCR as
shown in the illustration (੬ pg. 32).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder’s Power Switch to “ ” or “ ”, then
set your TV to the appropriate input mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
3
4
5
Turn on the camcorder, the VCR and the TV.
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set “DISPLAY” to “ON” or “OFF” in the
Playback Menu (੬ pg. 30).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Playback Menu (੬ pg. 30).
•Playback Sound Mode Display
.... set the Power Switch to “ ”. Press MENU/
BRIGHT and set “ON SCREEN” in the Date/
Time Menu (੬ pg. 18 – 20) to “ON” or
“OFF”. Then, set the Power Switch back to
YABCK
PAL
“
”.
PLAYBACK Advanced Connections
34
EN
Power Switch
Connection To A Personal Computer
This camcorder can transfer still images to a PC using
image transfer software (GR-DVL45/DVL40 owners:
provided, GR-DVL25/DVL20 owners: optional software
such as the HS-V4KIT) when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
Make sure the camcorder and PC are turned off.
1
2
3
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
Connector cover*
To PC
Turn the camcorder’s Power Switch to “
turn on the PC.
” and
To
NOTES:
DV IN/OUT
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(੬ pg. 7).
Core filter
● Never connect the PC connection cable and the DV
cable simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
● The date/time information cannot be captured into the
PC.
● Refer to the instruction manuals of your software.
● Also refer to the manufacturer’s instruction manual for
the DV connector-equipped capture board.
● Be sure to use a DV cable with core filters.
DV cable
(optional)
PC connection
cable**
Core filter
To DV
connector
To RS-232C
PC with DV
connector-equipped
capture board
PC
* When connecting cables, open this cover.
** Provided with GR-DVL45/DVL40, optional
for GR-DVL25/DVL20.
EN35
Power Switch
Connection To A Video Unit Equipped With
A DV Connector
Connection to the GV-DT3 Digital Printer (optional) allows
you to print out images or transfer them to a PC. It is also
possible to copy recorded scenes from the camcorder onto
another video unit equipped with a DV connector. This
function is called Digital Dubbing (੬ pg. 37), which
offers virtually no image or sound deterioration.
Make sure all units are turned off.
1
2
3
Make connections to the device you want to connect
to using a DV cable, as shown in the illustration.
Connector cover*
To DV IN/OUT
If necessary, connect a PC connection cable to the
printer’s PC connector and the PC’s RS-232C
connector.
Core filter
Core filter
Core filter
Turn the camcorder’s Power Switch to “
turn on the other units.
” and
4
DV cable
(optional)
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(੬ pg. 7).
Core filter
YABCK
To DV IN
connector
To DV
connector
● For Digital Dubbing, this camcorder can be connected
only to one device at a time. This camcorder can also be
used as a recorder.
PAL
● If Still Playback, Slow-Motion Playback, Fast-Forward or
Rewind is attempted with the camcorder connected to a
video unit via the DV connector, the image will take on
an effect similar to a coloured mosaic pattern or it will
become black.
Video unit equipped with
a DV input connector
● Also refer to the instruction manuals of the connected
units.
● Be sure to use a DV cable with core filters.
To PC connector
Digital Printer
PC connection
cable**
To RS-232C
PC
* When connecting cables, open this cover.
** Provided with GR-DVL45/DVL40, optional
for GR-DVL25/DVL20.
TAPE DUBBING
36
EN
Tape Dubbing
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 32 and 33.
TV
1
2
Set the camcorder’s Power Switch to “
”, turn on
the VCR’s power, and insert the appropriate cassettes
in the camcorder and the VCR.
VCR (Recording deck)
Engage the VCR’s AUX and Record-Pause modes.
3
4
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4/
To AUDIO,
6 on the camcorder.
VIDEO*
and
-IN
connectors
Press 4/6 on the camcorder and engage the VCR’s
Record mode.
5
6
7
Engage the VCR’s Record-Pause mode and press
4/6 on the camcorder.
A/V cable
(provided)
[RCA plug to
RCA plug]
S-Video cable
(provided)
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
White to Audio
Output L
NOTES:
● You can use Playback Zoom (੬ pg. 40) or Playback
Special Effects (੬ pg. 41) in step 5.
Red to Audio
Output R
Yellow to
Video Output*
● Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
To
S-Video
Output
.....set “DISPLAY” to “ON” or “OFF” in the Playback
Menu (੬ pg. 30).
•Time Code
.....set “TIME CODE” to “ON” or “OFF” in the
Playback Menu (੬ pg. 30).
•Playback Sound Mode Display
.....set the Power Switch to “ ”. Press MENU/
BRIGHT and set “ON SCREEN” in the Date/Time
Menu (੬ pg. 18 – 20) to “ON” or “OFF”. Then,
set the Power Switch back to “
”.
The connectors are
located beneath the cover.
* Connect when the S-Video cable is not used.
EN37
Power Switch
Digital Dubbing
It is also possible to copy recorded scenes from the
camcorder onto another video unit equipped with a DV
connector. Since a digital signal is sent, there is little if any
image or sound deterioration.
Make sure the camcorder’s power is off.
1
Connect the camcorder to your video unit equipped
2
with a DV connector using a DV cable as shown in
the illustration.
To DV IN/OUT
Core filter
Press
4
to play back the source tape.
The connectors are
located beneath
the cover.
3
4
While watching the playback on the monitor, engage
the DV connector-equipped video unit’s record mode
from the spot on the source tape you want to begin
recording.
DV cable (optional)
NOTES:
● It is recommended to use the AC Power Adapter/ Charger
as the power supply instead of the battery pack (੬pg. 7).
● If the remote control is used when both the player and
recorder are JVC video units, both units will perform the
same operation. To prevent this from happening, press
the buttons on both units.
Core filter
To DV IN
Video unit equipped
with DV connector
● For Digital Dubbing, this camcorder can be connected
only to one device at a time. This camcorder can also be
used as a recorder.
● If a blank portion or disturbed image is played back on
the player during dubbing, the dubbing may stop so that
an unusual image is not dubbed.
● Even though the DV cable is connected correctly,
sometimes the image may not appear in step 3. If this
occurs, turn off the power and make connections again.
● If “Playback Zoom” (੬ pg. 40), “Playback Special
Effects” (੬ pg. 41) or “Snapshot” is attempted during
playback, only the original playback image recorded on
the tape is output from the DV IN/OUT connector.
● Be sure to use a DV cable with core filters.
RM-V711U
(provided)
T
W
PLAY (4
)
STOP (5)
To Use This Camcorder As A Recorder . . .
1. Turn the Power Switch to “
”.
2. Connect the DV cable as shown in the illustration and load a cassette to record on.
3. Press the Recording Start/Stop Button to engage the Record-Pause mode. “DV IN” appears on the screen.
DV IN
4. Press the Recording Start/Stop Button to start recording. “DV IN” changes to “
”.
5. Press the Recording Start/Stop Button again to engage the Record-Pause mode. “ DV IN ” returns to “DV
IN”.
NOTES:
● During Digital Dubbing, the image is dubbed using the recording mode selected in the Mode Menu
(੬ pg. 10).
● Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current
“SOUND MODE” setting (੬ pg. 20).
● During Digital Dubbing, no signal is output from the audio/video output connector.
USING THE REMOTE CONTROL UNIT
38
EN
Installing The Battery
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.
The remote control uses one lithium battery
(CR2025).
2
3
1
Pull out the battery holder while pressing the
1
2
3
knob as shown.
1
Insert the battery in the holder, and be sure to
Knob
have the “+” mark visible.
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(੬ pg. 2).
Remote sensor
Transmitted beam
effective area
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
5m
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
30°
30°
EN39
1
2
3
0
!
T
W
@
$
%
&
(
4
#
5
7
9
6
8
^
*
RM-V711U
(provided)
)
Functions
With the camcorder’s Power
With the camcorder’s Power
Switch set to the camera position
(“ ” or “ ”).
Buttons
Switch set to “
”.
੬ pg. 43
1 PAUSE IN Connector
2 Zoom (T/W) Buttons
3 DISPLAY Button
4 SHIFT Button
—
Zoom in/out (੬ pg. 40)
੬ pg. 20
Zoom in/out (੬ pg. 14)
—
—
੬ pg. 40
੬ pg. 40
੬ pg. 40
5 SLOW Rewind/Forward Buttons
—
—
Left/Right Buttons
੬ pg. 43
6 FADE/WIPE Button
—
—
Rewind, Reverse Shuttle Search
(੬ pg. 29)
7 REW Button
੬ pg. 41
8 EFFECT Button
—
—
੬ pg. 41
9 EFFECT ON/OFF Button
0 Infrared beam transmitting window Transmits the beam signal.
! START/STOP Button
@ AUDIO MONITOR Button
# MBR SET Button
Functions same as the Recording Start/Stop button on the camcorder.
੬ pg. 31
—
—
੬ pg. 42
੬ pg. 40
੬ pg. 48
$ Down Button
—
—
A. DUB Button
੬ pg. 40
% Up Button
—
—
—
INSERT Button*
Fast-Forward, Forward Shuttle
Search (੬ pg. 29)
^ FF Button
—
Playback start (੬ pg. 29)
Pause (੬ pg. 29)
Stop (੬ pg. 29)
& PLAY Button
—
—
—
—
* PAUSE Button
( STOP Button
) R.A.EDIT Buttons
੬ pg. 42 – 47
* This function is unavailable.
USING THE REMOTE CONTROL UNIT (cont.)
40
EN
Remote sensor
FEATURE: Slow-Motion Playback
PURPOSE:
To allow slow-speed search in either direction.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
PAUSE (6) at the desired point.
2) Press SLOW (9 or 0). After approx. 1 minute in Slow
Rewind or approx. 2 minutes in Slow Forward, normal
playback resumes.
Ⅲ To stop Slow-Motion Playback, press PLAY (4).
NOTES:
● During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
● After SLOW (9 or 0) is pressed, the still image may be
displayed for a few seconds, followed by a blue screen
for a few seconds. This is not a malfunction.
● There may be a small margin between the slow-motion
playback start point you chose and the actual start
point for Slow-Motion Playback.
● During Slow-Motion Playback, there will be distur-
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunc-
tion.
● During Slow-Motion Playback, press PAUSE (6) to
pause playback.
Zoom Buttons
SHIFT
Up Button
T
W
Down Button
Left or SLOW
Rewind Button
PLAY
PAUSE
STOP
Right or SLOW
Forward Button
RM-V711U
(provided)
FEATURE: Frame-By-Frame Playback
Normal playback
Press T
PURPOSE:
To allow frame-by-frame search.
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
press PAUSE (6) at the desired point.
2) Press PAUSE (6) repeatedly. Each time it is pressed, the
frame is played back.
To move image,
press
(Right)
while keeping
SHIFT held down.
FEATURE: Playback Zoom
PURPOSE:
To magnify the recorded image up to 4X at any time during
playback.
OPERATION:
1) Press PLAY (4) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a
particular portion of the picture. While holding down
SHIFT, press
(Down).
(Left),
(Right),
(Up) and
Ⅲ To end zoom, press and hold W until magnification
returns to normal. Or, press STOP (5) and then press
PLAY (4).
NOTES:
● Zoom can also be used during slow-motion and still
playback.
● Due to digital image processing, the quality of the
image may suffer.
EN41
PLAYBACK EFFECT
PLAYBACK EFFECT
Select Menu
FEATURE: Playback Special Effects
4
OFF
1
2
3
4
5
CLASSIC FILM
MONOTONE
SEPIA
PURPOSE:
B/W
To allow you to add creative effects to the playback
image.
STROBE
VIDEO ECHO
OPERATION:
1) To start playback, press PLAY (4).
2) Point the remote control at the camcorder's remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
Remote sensor
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
Ⅲ To deactivate the selected effect, press EFFECT ON/
OFF on the remote control. Pressing it again re-
activates the selected effect.
Ⅲ To change the selected effect, repeat from step 2
above.
NOTES:
● When some Playback Special Effects are used, the
Multi-Analyser 4 and Multi-Analyser 9 Snapshot
modes (੬ pg. 17) are not available.
● The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo. The effects work the same in playback as they
did in recording. Refer to page 24 for more
information.
T
W
PLAY
EFFECT
ON/OFF
EFFECT
RM-V711U
(provided)
USING THE REMOTE CONTROL UNIT (cont.)
42
EN
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the RM-V711U MBR
(Multi-Brand Remote) is set to operate with your
brand of VCR (see VCR CODE LIST), but can also be
performed by operating the VCR manually.
VCR (Recording deck)
Before operation, make sure the lithium battery is
installed in the remote control RM-V711U (੬ pg. 38).
SET REMOTE/VCR CODE
T
W
SHIFT
MBR SET
Turn off the power to the VCR and point the
3
1
6
1
2
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST, press and hold
MBR SET, and press button (A) and then (B).
The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
2
4
5
RM-V711U
(provided)
Make sure the VCR’s power is on. Then, while
holding SHIFT, press the button on the remote
for the desired function. The functions the
remote can control are PLAY, STOP, PAUSE, FF,
REW and VCR REC STBY (you do not need to
press SHIFT for this one).
7 8 9 `
VCR CODE LIST
You are now ready to try Random Assemble
Editing.
VCR BRAND
NAME
BUTTONS
(A) (B)
VCR BRAND
BUTTONS
(A) (B)
NAME
IMPORTANT
AKAI
6
6
7
2ꢀ
4ꢀ
7
PHILIPS
1
9
1
9
9
9
1
3
7
9ꢀ
5ꢀ
1ꢀ
4ꢀ
1ꢀ
6ꢀ
2ꢀ
3ꢀ
2ꢀ
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
BLAUPUNKT
FERGUSON
1
3
NOTES:
9
9
3
7ꢀ
8ꢀ
2
● If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR do not come on
automatically. In this case, turn the power on
manually and try step 2.
GRUNDIG
HITACHI
1
3
4ꢀ
4
ꢀ
ꢀ
SANYO
3
3
6ꢀ
5
● If the remote control is not able to control the VCR,
use the controls on the VCR.
● When the remote control’s battery runs out, the
VCR brand you have set will be erased.
In that case, replace the old battery with a new one
to reset the VCR brand.
6
6
6ꢀ
3
SELECO,
REX
9
9
1ꢀ
6
JVC
A
B
C
9
9
9
1ꢀ
6ꢀ
3
SHARP
1
1
5ꢀ
`
6
6
3
3
9
9
9
3
5ꢀ
`ꢀ
9ꢀ
1ꢀ
1ꢀ
6ꢀ
7ꢀ
2
SONY
MITSUBISHI
6
6
7ꢀ
8
NEC
3
3
7ꢀ
8
ꢀ
THOMSON,
TELEFUNKEN,
SABA,
PANASONIC
1
1
1
9
1
3ꢀ
7ꢀ
1ꢀ
4ꢀ
8
NORDMENDE
TOSHIBA
6
6
9ꢀ
1
EN43
MAKE CONNECTIONS
Also refer to pg. 32 and 33.
To connect to:
1
A JVC VCR equipped with a remote pause
connector . . .
Connector
cover**
... connect the editing cable to the Remote
PAUSE connector.
Connector cover**
To JLIP***
Core filter
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
To
S-Video
Output
... connect the editing cable to the R.A.EDIT
connector.
Yellow to
Red to
Audio
Video
Output*
Output R
A VCR other than above . . .
... connect the editing cable to the RM-V711U’s
PAUSE IN connector.
White to
Audio Output L
A/V cable (provided)
[RCA plug to RCA plug]
Insert a recorded tape into the camcorder and set the
2
3
Power Switch to “
”.
S-Video
cable
(provided)
Editing cable
(provided)
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s
instructions).
To AUDIO,
VIDEO*
and
-IN
SELECT SCENES
connectors
Point the remote control at the camcorder’s remote
To Remote
4
5
sensor. Press PLAY (4) and then press R.A.EDIT ON/
OFF on the remote control.
PAUSE or R.A.EDIT
To PAUSE IN
VCR
The Random Assemble Editing Menu appears.
If using a Fade/Wipe at the beginning of the scene,
press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the
beginning of Programme 1.
TV
T
W
DISPLAY
FADE/WIPE
PLAY
RM-V711U
(provided)
R.A.EDIT
ON/OFF
NOTES:
●Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
● When editing on a VCR equipped with DV input
connector, the DV cable can be connected instead of
the S-Video cable and Audio/Video cable.
*
Connect when the S-Video cable is not used.
** When connecting cables, open this cover.
***GR-DVL45/DVL40 owners: Use the plug
which has three yellow rings around the pin.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DISPLAY” to “ON” or “OFF” in the Playback Menu (੬ pg. 30).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Playback Menu (੬ pg. 30).
•Playback Sound Mode Display
.... set the Power Switch to “ ”. Press MENU/BRIGHT and set “ON SCREEN” in the Date/Time Menu
(੬ pg. 18 – 20) to “ON” or “OFF”. Then, set the Power Switch back to “
”.
CONTINUED ON NEXT PAGE
USING THE REMOTE CONTROL UNIT (cont.)
44
EN
SELECT SCENES (cont.)
Programme
IN
OUT
MODE
At the beginning of the scene, press EDIT IN/OUT on
the remote control. The Edit-In position appears in
the Random Assemble Editing Menu.
1 –– –– : ––
~
Random Assemble
2
6
7
8
Editing Menu
3
~
~
~
~
~
~
4
5
6
At the end of the scene, press EDIT IN/OUT. The
Edit-Out position appears in the Random Assemble
Editing Menu.
7
8
TIME CODE
TOTAL
–– : ––
00 : 00
If using a Fade/Wipe at the end of the scene, press
FADE/WIPE.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•If you select a Fade/Wipe effect for an Edit-Out
point, the effect is automatically applied to the
following Edit-In point.
Remote sensor
•You cannot use a Picture Wipe/Dissolve at the end
of the last scene.
•When you use Fade/Wipe effects, that time is
included in the total time (this does not apply to
Picture Wipe/Dissolve).
1
If using Playback Special Effects, press EFFECT
9
(੬ pg. 41).
Repeat steps 6 through 9 to register additional scenes.
RM-V711U
(provided)
10 •To change previously registered points, press
T
W
CANCEL on the remote control. The registered
points disappear, one at a time, from the most
recently registered point.
FADE/WIPE
EFFECT
PLAY
•If you are not using Fade/Wipe or Programme AE
with special effects, repeat steps 6 and 7 only.
R.A.EDIT
ON/OFF
EDIT IN/OUT
CANCEL
NOTES:
● When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between
them.
● If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be
canceled and editing will not take place.
● If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in
the edited version.
● Since time codes register time only as accurately as seconds, the time code total time may not match the
total programme time exactly.
● Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.
● If you select Sepia or Monotone mode from Programme AE with special effects, you cannot use the Dissolve
or Black & White Fader. In this case the Dissolve or Black & White indicator begins blinking. Once the next
Edit-In point is registered, the effect is turned off. To combine these effects, use Sepia or Monotone during
recording, then use the Dissolve or Black & White Fader during Random Assemble Editing.
● It is not possible to use Fade/Wipe effects and Programme AE with special effects during Random Assemble
Editing using a DV cable.
EN45
AUTOMATIC EDITING TO VCR
Rewind the tape in the camcorder to the beginning of
11 the scene you want to edit and press PAUSE (6).
Point the remote control towards the VCR’s remote
12 sensor and press VCR REC STBY (q6), or manually
engage the VCR’s Record-Pause mode.
Press the Recording Start/Stop Button on the
13 camcorder. Editing proceeds as programmed, right
Recording Start/Stop Button
through to the end of the last registered scene.
•Pressing START/STOP on the remote control does
not start editing.
•When dubbing is complete, the camcorder enters
the Pause mode, and the recording deck enters its
Record-Pause mode.
IN
00 : 25
07 : 18
OUT
MODE
––
Random Assemble
Editing Menu
W
H
1
2
~
~
~
~
~
~
~
~
02 : 05
08 : 31 ––
05 : 53
13 : 15
P
P
B/W
3 –– 03 : 33
4
5
09 : 30
15 : 55
•If you do not register an Edit-Out point, the tape will
be dubbed all the way to the end automatically.
1
16 : 20 –– ––
6 –– –– : ––
7
8
TIME CODE
TOTAL
16 : 30
9 : 39
Engage the Stop modes for the camcorder and the
14 VCR.
To make the R.A.Edit counter display disappear, press
R.A.EDIT ON/OFF on the remote control.
Remote Sensor
NOTES:
● Pressing R.A.EDIT ON/OFF on the remote control clears
all settings registered during Random Assemble Editing.
● When the editing cable is connected to the remote
control’s Pause In connector during dubbing, make sure
the remote control is pointed at the VCR’s sensor, and
the path between the two is unobstructed.
● Random Assemble Editing may not function properly
when using a tape including several duplicated time
codes (੬ pg. 16).
RM-V711U
(provided)
T
W
STOP
REW
FADE/WIPE
EFFECT
PAUSE
EDIT IN/OUT
R.A.EDIT
ON/OFF
CANCEL
VCR REC
STBY
USING THE REMOTE CONTROL UNIT (cont.)
46
EN
Programme 1
For More Accurate Editing
Some VCRs make the transition from Record-Pause to
IN
OUT
MODE
1 –– –– : ––
~
~
~
~
~
~
~
~
Random Assemble
Editing Menu
Record mode faster than others. Even if you begin editing
for the camcorder and the VCR at exactly the same time,
2
3
4
5
you may lose scenes you wanted, or find that you have
recorded scenes you did not want. For a cleanly edited
tape, confirm and adjust the timing of the camcorder
against your VCR.
6
7
8
TIME CODE
TOTAL
–– : ––
00 : 00
DIAGNOSING VCR/CAMCORDER TIMING
Play back the tape in the camcorder, then point the
1
2
3
remote control at the camcorder’s remote sensor and
press R.A.EDIT ON/OFF.
TV
VCR
(Recording deck)
The Random Assemble Editing Menu appears.
Perform Random Assemble Editing on Programme 1
only. In order to check VCR and camcorder timing,
select the beginning of a scene transition as your Edit-
In point.
Remote sensor
Play back the dubbed scene.
•If any images from the scene prior to the
transition you chose for your Edit-In point were
recorded, that means your VCR moves too quickly
from Record-Pause to Record mode.
•If the scene you tried to dub starts in progress, the
VCR is slow to start recording.
RM-V711U
(provided)
T
W
R.A.EDIT ON/OFF
EN47
ADJUSTMENT OF VCR/CAMCORDER
TIMING
MENU/BRIGHT Dial
Point the remote control at the camcorder’s remote
4
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press MENU/BRIGHT. The Playback Menu appears.
Move the highlight bar to “SYNCHRO” by rotating
MENU/BRIGHT, then press it. The value for
“SYNCHRO” is highlighted.
5
6
Based on the diagnostics performed (੬ pg. 46), you
can now increase the VCR’s speed by rotating
MENU/BRIGHT downward. You can also slow down
the VCR’s speed by rotating MENU/BRIGHT upward.
The adjustment range is from –1.3 to +1.3 seconds, in
0.1-second increments.
Display
Playback Menu
48kHz MODE
32kHz MODE
SYNCHRO
INDICATION
DISPLAY
TIME CODE
FULL SOUND
SOUND1
0 . 0
4
ON
ON
OFF
Press MENU/BRIGHT twice.
Now perform Random Assemble Editing beginning
with step 4 on page 43.
7
END
NOTES:
● Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
● Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
48kHz MODE
32kHz MODE
SYNCHRO
INDICATION
DISPLAY
TIME CODE
FULL SOUND
SOUND1
0 . 0
4
ON
ON
OFF
END
TV
VCR
(Recording deck)
USING THE REMOTE CONTROL UNIT (cont.)
48
EN
Display
Audio Dubbing
The audio track can be customized only when recorded in
Audio Dub Standby
mode
the 32 kHz mode (੬ pg. 20).
NOTES:
● Audio Dubbing is not possible on a tape recorded at
48 kHz, on a tape recorded in the LP mode or on a
blank portion of a tape.
● To perform Audio Dubbing while watching on the
television, make connections (੬ pg. 32).
Play back the tape to locate the point where editing
1
2
3
will start, then press PAUSE (6).
While holding A.DUB (e) on the remote control,
press PAUSE (6). “6e” appears.
Press PLAY (4) , then begin “narrating”.
Speak into the microphone.
•To pause dubbing, press PAUSE (6).
Power Switch
To end Audio Dubbing, press PAUSE (6), then STOP
Speaker
4
(5).
Remote sensor
NOTES:
●When editing onto a tape that was recorded at 32 kHz,
the old and new soundtracks are recorded separately.
●To select the desired sound for playback, press AUDIO
MONITOR on the remote control.
●If you dub onto a blank space on the tape, the sound
may be disrupted. Make sure you only edit recorded
areas.
●If feedback or howling occurs during TV Playback, move
the camcorder’s microphone away from the TV, or turn
down the TV’s volume.
Stereo
microphone
●Sound is not heard from the speaker during Audio
Dubbing.
●If you change from 32 kHz to 48 kHz in mid-recording
and then use the tape for Audio Dubbing, it is not
effective from the point where 48 kHz recording began.
●During Audio Dubbing, when the tape moves to scenes
recorded in the LP mode, scenes recorded at 48 kHz or a
blank portion, Audio Dubbing stops and “ERROR! REFER
MANUAL” appears.
AUDIO
T
W
MONITOR
DISPLAY
A.DUB
PLAY
PAUSE
STOP
RM-V711U
(provided)
Recording sound
32 kHz
Display
FULL SOUND
SOUND 2
Output sound
Original and new tracks are combined and output in stereo.
New track is output on both “L” and “R” channels in stereo.
Original track is output on both “L” and “R” channels in stereo.
SOUND 1
TROUBLESHOOTING
EN49
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery
pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes; and then re-connect it and proceed
as usual from the beginning.
SYMPTOM
1. No power is supplied.
POSSIBLE CAUSES
CORRECTIVE ACTION
1. •The power is not connected
properly.
1. •Connect the AC Power
Adapter/Charger securely
(੬ pg. 7).
•The battery is dead.
•Replace the dead battery
with a fully charged one
(੬ pg. 6, 7).
2. Recording cannot be
2. •The tape’s erase protection
switch is set to “SAVE”.
2. •Set the tape’s erase
protection switch to “REC”
(੬ pg. 9).
performed.
•The Power Switch is set to
“
”.
•Set the Power Switch to any
•“TAPE END” appears.
position except “
” or
•The cassette’s cover is open.
“OFF” (੬ pg. 13).
•Replace with new cassette
(੬ pg. 9).
•Close the cassette’s cover.
3. There is no picture.
3. •The camcorder is not getting
power, or some other
3. •Turn the camcorder’s power
off and on again
malfunction exists.
(੬ pg. 12).
4. Some functions are not
available using MENU/
BRIGHT.
4. •The Power Switch is set to
4. •Set the Power Switch to
“
”.
“
” (੬ pg. 13).
5. The focus does not adjust
5. •Focus is set to “MANUAL”.
•The recording was done in a
dark place, or the contrast
was low.
5. •Set Focus to “AUTO”
(੬ pg. 25).
automatically.
•Clean the lens and check
the focus again (੬ pg. 54).
•The lens is dirty or covered
with condensation.
6. The cassette will not load
6. •The cassette is in the wrong
position.
6. •Set it in the right position
(੬ pg. 9).
properly.
•The battery’s charge is low.
•Install a fully charged
battery (੬ pg. 6, 7).
7. Snapshot mode cannot be
7. •The Squeeze mode is
7. •Disengage the Squeeze
used.
selected.
mode (੬ pg. 19).
8. The Snapshot colour looks
8. •The light source or the
subject does not include
white. Or there are various
different light sources
8. •Find a white subject and
compose your shot so that it
also appears in the frame
(੬ pg. 17).
strange.
behind the subject.
CONTINUED ON NEXT PAGE
TROUBLESHOOTING (cont.)
50
EN
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
9. Digital Zoom does not
9. •16X optical zoom is
selected.
9. •Turn off the Video Echo
mode (੬ pg. 24).
work.
•The Video Echo mode is
activated.
•Wait until the Picture Wipe
or Dissolve effects are
completed (੬ pg. 22, 23).
•Picture Wipe or Dissolve are
being used in a scene
transition.
10. Programme AE with
special effects and Fade/
Wipe Effects do not work.
10. •The Power Switch is set to
10. •Set the Power Switch to
“
”.
“
”.
11. The Black & White Fader
11. •The Sepia or Monotone
11. •Turn off Sepia and
does not work.
mode is activated.
Monotone (੬ pg. 24).
12. The Dissolve function does
12. •The Sepia, Monotone or
Slow Shutter mode of
Programme AE with special
effects is activated.
12. •Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene
not work.
transition (੬ pg. 24).
•Make sure that the Squeeze
mode in the Mode Menu is
set to “OFF” (੬ pg. 19).
•Make sure you have
selected the mode of
•The Squeeze mode is
selected.
•The previously selected
mode of Programme AE
with special effects was
changed after the last
selected scene for editing
was registered.
Programme AE with special
effects you want before
starting editing
(੬ pg. 24).
13. The Picture Wipe and
Dissolve functions do not
work.
13. •The last selected editing
scene is ending.
13. •Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically activated
(੬ pg. 22).
•At the end of the last
selected scene for editing,
the Power Switch was set to
“OFF”.
•Do not turn off the
•The power is off.
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (੬ pg. 22).
•The camcorder automati-
cally shuts off after 5
minutes have elapsed in the
Record-Standby mode.
Make sure you continue
operations within 5 minutes
after engaging Record-
Standby mode (੬ pg. 22).
14. The picture wipe function
14. •The Slow Shutter mode is
activated.
14. •Make sure the Squeeze
mode, Cinema mode, or
Slow Shutter mode is not
activated when preparing to
use the Picture Wipe
does not work.
•The Squeeze or Cinema
mode is selected in the
Mode Menu.
function (੬ pg. 19, 24).
EN51
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
15. Scene transition does not
15. •When using “Picture Wipe/
Dissolve” (੬ pg. 22), there
is a delay of a fraction of a
second between the
15.
go as expected.
previous record stop-point
and the Dissolve start-point.
This is normal, but this slight
delay becomes especially
noticeable when shooting a
fast-moving subject or
————
during rapid panning.
16. The Video Echo mode
16. •The Picture Wipe or
Dissolve functions are in use.
•The Squeeze mode is selected
in the Mode Menu.
16. •Make sure the Squeeze
mode is set to “OFF”
does not work.
(੬ pg. 18, 19).
•Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out (੬ pg. 24).
•A Fade-In or Fade-Out is in
progress.
17. Even when Slow Shutter is
not selected, the image
17. •When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
17. •If you want the lighting to
look more natural, set GAIN
UP to “AGC” or “OFF” in
the Mode Menu (੬ pg. 18,
19).
looks like it is activated.
18. There is no strobe when
the Classic Film or Strobe
mode is activated.
18. •The Picture Wipe or
18. •Do not try to use the Classic
Film or Strobe mode during
a scene transition
Dissolve function is in use.
(੬ pg. 24).
19. White Balance cannot be
19. •The Sepia or Monotone
19. •Turn off Sepia or Monotone
before setting White
activated.
mode is activated.
Balance (੬ pg. 24).
20. When shooting a subject
illuminated by bright light,
vertical lines appear.
20. •This is a result of exceed-
ingly high contrast, and is
not a malfunction.
20.
————
21. When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for
an instant.
21. •This is not a malfunction.
21.
————
22. During recording, the date/
22. •“DISPLAY” is set to “OFF” in
the Date/Time Menu.
22. •Set “DISPLAY” to “ON” in
the Date/Time Menu
(੬ pg. 21).
time does not appear.
•Self-Recording is performed.
•During Self-Recording, the
date/time does not appear
(੬ pg. 13).
•Set “INDICATION” to “ON”
in the Date/Time Menu
(੬ pg. 21).
23. The indicators and
23. •“ON SCREEN” is set to
“OFF” in the Date/Time
Menu.
23. •Set “ON SCREEN” to “ON”
in the Date/Time Menu
(੬ pg. 21).
messages do not appear.
•You have made the
indicators disappear.
•Set “INDICATION” to “ON”
in the Date/Time Menu
(੬ pg. 21).
CONTINUED ON NEXT PAGE
TROUBLESHOOTING (cont.)
52
EN
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
24. Images on the LCD
monitor appear dark or
whitish.
24. •In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the camcorder.
•When the LCD monitor’s
fluorescent light reaches the
end of its service life,
24. •Adjust the brightness and
angle of the LCD monitor
(੬ pg. 12).
images on the LCD monitor
become dark. Consult your
nearest JVC dealer.
25. The rear of the LCD
25. •The light used to illuminate
the LCD monitor causes it to
become hot.
25. •Close the LCD monitor to
turn it off or set the Power
Switch to “OFF”, and let the
unit cool down.
monitor is hot.
26. The indicators and the
image colour on the LCD
monitor are not clear.
26. •This may occur when the
surface or the edge of the
LCD monitor is pressed.
26.
————
27. The LCD monitor or
viewfinder indications
blink.
27. •Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, “DIS”
and other functions that
27. •Re-read the sections
covering Fade/Wipe effects,
Programme AE with special
effects and “DIS”
cannot be used together are
selected at the same time.
(੬ pg. 19, 22 – 24).
28. Coloured bright spots
appear all over the LCD
monitor or the viewfinder.
28. •The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
28.
————
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99%)
29. During recording, sound
29. •This is normal.
29.
————
cannot be heard.
30. Play, Rewind and Fast-
Forward functions do not
work.
30. •The Power Switch is not set
30. •Set the Power Switch to
to “
”.
“
” (੬ pg. 29).
31. The tape is moving, but
31. •Your TV has AV input
terminals, but is not set to its
VIDEO mode.
31. •Set the TV to the mode or
channel appropriate for
video playback (੬ pg. 32,
33).
there is no picture.
•The cassette’s cover is open.
•Close the cassette’s cover
(੬ pg. 9).
EN53
SYMPTOM
POSSIBLE CAUSES
32. •During playback of an
unrecorded portion, High-
speed Search and still
CORRECTIVE ACTION
32. The LCD monitor
32.
indications are distorted.
————
playback, LCD monitor
indications appear distorted.
This is not a defect.
33. Images on the LCD
33. •The speaker volume is too
33. •Turn the speaker volume
monitor are jittery.
great.
down (੬ pg. 29).
34. The LCD monitor, the
viewfinder and the lens
have become dirty (ex.
fingerprints).
34.
34. •Wipe them gently with a
soft cloth. Wiping strongly
can cause damage.
————
35. An unusual mark appears.
35.
35. •Check the section of the
manual that explains LCD
monitor/viewfinder
————
indications (੬ pg. 60, 61).
36. An error indication
36. •A malfunction of some kind
has occurred. In this case
the camcorder’s functions
become unusable.
36. •Remove the power supply
(battery pack, etc.) and wait a
few minutes for the indication
to clear. When it does, you
can resume using the
(E01 — E06) appears.
camcorder. If the indication
remains even though you
repeat the above two or three
times, please consult your
nearest JVC dealer.
37. The charger indicator on
the AC Power Adapter/
Charger does not light.
37. •The temperature of the
battery is extremely high/low.
•Charging is difficult in
places subject to extremely
high/low temperatures.
37. •To protect the battery, it is
recommended to charge it
in places with a temperature
of 10°C to 35°C (50°F to
95°F) (੬ pg. 55).
38. The recording mode
38. •This occurs when recording
in the LP mode is not
38.
indicator “LP” blinks.
available. After the indicator
blinks, the recording mode
switches to “SP” and
————
recording goes on.
39. Picture does not appear on
39. •The lens cap is attached.
• The LCD monitor is not
open at an angle of over 45
degrees.
39. •Remove the lens cap
(੬ pg. 12).
the LCD monitor.
• Open the LCD monitor to
an angle of over 45 degrees.
• Adjust the brightness of the
LCD monitor (੬ pg. 12).
• If the monitor is tilted
upward to 180 degrees,
open it fully (੬ pg. 12).
• The LCD monitor’s
brightness setting is too
dark.
40. When the image is printed
from the printer, a black
bar appears at the bottom
of the screen.
40. •This is not a malfunction.
40. •By recording with “DIS”
activated (੬ pg. 19) this
can be avoided.
41. When the camcorder is
connected via the DV
connector, the camcorder
does not operate.
41. •The DV cable was plugged/
unplugged with power
turned on.
41. •Turn the camcorder’s power
off and on again, then
operate it.
USER MAINTENANCE
Cleaning The Camcorder
54
EN
After Use
Turn off the camcorder.
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
1
2
1
Press PUSH OPEN and open the LCD monitor.
Slide OPEN/EJECT in the direction of the arrow,
then swing the cassette cover open until it locks.
The cassette holder opens automatically.
Remove the cassette.
Open the LCD monitor and wipe gently with a
soft cloth. Be careful not to damage the
monitor. Close the LCD monitor.
2
Press “PUSH HERE” to close the cassette holder,
then close the cassette cover.
3
4
5
6
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
3
4
Close and lock the LCD monitor.
To clean the viewfinder, raise it to the vertical
position. Carefully lift the plastic tab on the
bottom of the viewfinder, and open the cover
1.
Slide BATTERY RELEASE and remove the battery
pack.
Replace the lens cap over the lens.
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the
interior of the viewfinder with it 2.
5
6
Replace the lens cap, making sure it locks in
place. Tilt the viewfinder back to the horizontal
position.
OPEN/EJECT Switch
PUSH HERE
NOTES:
● Avoid using strong cleaning agents such as benzine
or alcohol.
PUSH OPEN Button
● Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth
refer to the cautions of each product.
Bottom of viewfinder
Remove.
Cassette holder
Blower brush
2
BATTERY RELEASE Switch
1
Cover
CAUTIONS
EN55
Video Light
Battery Packs
DANGER
Ⅲ The video light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
Terminals
Ⅲ Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
Battery cap
Ⅲ When operating, keep a distance of about 30 cm
between the video light and people or objects.
Ⅲ Do not use near flammable or explosive materials.
Ⅲ It is recommended that you consult your nearest
JVC dealer for replacing the video light.
The supplied battery pack is a lithium-ion battery.
Before using the supplied battery pack or an
optional battery pack, be sure to read the following
cautions:
1. To avoid hazard . . .
.... do not burn.
.... do not short-circuit the terminals. When
transporting, make sure the provided battery
cap is attached to the battery. If the battery cap
is misplaced, carry the battery in a plastic bag.
.... do not modify or disassemble.
.... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fire.
.... use only specified chargers.
2. To prevent damage and prolong service life . . .
.... do not subject to unnecessary shock.
.... charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type
battery—cooler temperatures impede chemical
reaction, while warmer temperatures can
prevent complete charging.
.... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
.... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period time.
.... remove from charger or powered unit when
not in use, as some machines use current even
when switched off.
NOTES:
●It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging............... 10°C to 35°C
Operation ............. 0°C to 40°C
Storage ................. –10°C to 30°C
●Recharging time is based on room temperature of
20°C.
●The lower the temperature, the longer recharging
takes.
CAUTIONS (cont.)
56
EN
Cassettes
Main Unit
To properly use and store your cassettes, be sure to
read the following cautions:
1. For safety, DO NOT . . .
.... open the camcorder’s chassis.
.... disassemble or modify the unit.
.... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not in
use.
1. During use . . .
.... make sure the cassette bears the Mini DV
mark.
.... be aware that recording onto prerecorded
tapes automatically erases the previously
recorded video and audio signals.
.... make sure the cassette is positioned properly
when inserting.
.... do not load and unload the cassette
repeatedly without allowing the tape to run at
all. This slackens the tape and can result in
damage.
.... allow inflammables, water or metallic objects
to enter the unit.
.... remove the battery pack or disconnect the
power supply while the power is on.
.... leave the battery pack attached when the
camcorder is not in use.
2. Avoid using the unit . . .
.... in places subject to excessive humidity or dust.
.... in places subject to soot or steam such as near
a cooking stove.
.... do not open the front tape cover. This exposes
the tape to fingerprints and dust.
.... in places subject to excessive shock or
vibration.
2. Store cassettes . . .
.... away from heaters or other heat sources.
.... out of direct sunlight.
.... where they won’t be subject to unnecessary
shock or vibration.
.... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
.... vertically, in their original cases.
.... near a television set.
.... near appliances generating strong magnetic or
electric fields (speakers, broadcasting anten-
nas, etc.).
.... in places subject to extremely high (over 40°C)
or extremely low (under 0°C) temperatures.
3. DO NOT leave the unit . . .
.... in places of over 50°C.
.... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
.... in direct sunlight.
.... in a closed car in summer.
.... near a heater.
LCD Monitor
1. To prevent damage to the LCD monitor,
DO NOT . . .
.... push it strongly or apply any shocks.
.... place the camcorder with the LCD monitor on
the bottom.
4. To protect the unit, DO NOT . . .
.... allow it to become wet.
.... drop the unit or strike it against hard objects.
.... subject it to shock or excessive vibration
during transportation.
2. To prolong service life . . .
.... avoid rubbing it with coarse cloth.
.... keep the lens directed at extremely bright
objects for long periods.
.... expose the lens to direct sunlight.
.... carry it by holding the LCD monitor or the
viewfinder.
.... swing it excessively when using the shoulder
strap or the grip.
3. Be aware of the following phenomena for LCD
monitor use.
These are not malfunctions:
•While using the camcorder, the surface around the
LCD monitor and/or the back of the LCD monitor
may heat up.
•If you leave power on for a long time, the surface
around the LCD monitor becomes hot.
EN57
5. Dirty heads can cause the following problems:
About moisture condensation . . .
● You have observed that pouring a cold liquid
into a glass will cause drops of water to form
on the glass‘ outer surface. This same
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool
place to a warm place, after heating a cold
room, under extremely humid conditions or
in a place directly subjected to the cool air
from an air conditioner.
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
•No picture during playback.
•Blocks of noise appear during playback.
•During recording, the Head Clog Warning
indicator “ ” appears.
In such cases, use an optional Cleaning Cassette.
Insert it and play back. If the cassette is used
more than once consecutively, damage to the
video heads may result. After the camcorder
plays back for about 20 seconds, it stops
automatically. Also refer to the Cleaning
Cassette’s instructions.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
If, after using the Cleaning Cassette, the problems
still exist, consult your nearest JVC dealer.
Mechanical moving parts used to move the video
heads and video tape tend to become dirty and
worn out over time. In order to maintain a clear
picture at all times, periodic check-ups are
recommended after using the unit for about
1,000 hours. For periodic check-ups please
consult your nearest JVC dealer.
The camcorder is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from function-
ing properly. In such cases, first disconnect its
power supply unit (battery pack, AC Power
Adapter/Battery Charger, etc.) and wait a few
minutes and then re-connect it and proceed as
usual from the beginning.
INDEX Controls, Connectors And Indicators
58
EN
1
y
Q
4
56 7
u
i
o
8
)
r
t
^ & *
(
2
3
p
Q
W
q
w e 0
9
%
E
R
T
!
@
#
$
EN59
Controls
Connectors
1 Battery Release Switch
The connectors
^
to
e
are located beneath a cover.
[BATTERY RELEASE] .............................. ੬ pg. 7
^
Video Output Connector [V] ................ ੬ pg. 32
2 PUSH OPEN Button............................... ੬ pg. 9
& Audio Output Connector [L] ................ ੬ pg. 32
* S-Video Output Connector [S] .............. ੬ pg. 32
( Audio Output Connector [R] ................ ੬ pg. 32
) DC IN Connector................................... ੬ pg. 7
3 Video Light Switch
[LIGHT OFF/AUTO/ON]
(GR-DVL45/DVL40 only) ..................... ੬ pg. 15
4 OPEN/EJECT Switch ............................... ੬ pg. 9
q J Terminal [JLIP (Joint Level Interface Protocol)
Connector] .......................................... ੬ pg. 43
•Connect the editing cable when performing
Random Assemble Editing (੬ pg. 42 – 47).
•It is used to connect the camcorder to a device
such as a personal computer.
5 Snapshot Button [SNAPSHOT] ............. ੬ pg. 17
6 •Power Zoom Lever [T/W] .................. ੬ pg. 14
•Speaker Volume Control [VOL.] ........ ੬ pg. 29
7 •MENU/BRIGHT Dial
[+, –, PUSH] ................................. ੬ pg. 8, 18
•LCD Monitor/Viewfinder Brightness
Control ............................................. ੬ pg. 12
For further details, consult your nearest JVC
dealer.
•JLIP-controlled editing from the camcorder to a
VCR is not possible if the VCR is not equipped
with a J terminal.
8 Snapshot Mode Button [MODE] ........... ੬ pg. 17
9 Recording Start/Stop Button.................. ੬ pg. 12
0 Power Switch [
, OFF,
,
] ...... ੬ pg. 13
w PC Connector ...................................... ੬ pg. 34
It is used to connect the camcorder to the serial
port of a personal computer.
! Rewind Button [REW] .......................... ੬ pg. 29
@ Stop Button [STOP] .............................. ੬ pg. 29
# Fast-Forward Button [FF] ...................... ੬ pg. 29
$ Play/Pause Button [PLAY/PAUSE] ......... ੬ pg. 29
% Dioptre Adjustment Control ................. ੬ pg. 11
For further details, consult your nearest JVC
dealer.
e Digital Video Connector
[DV IN/OUT] (i.link*) .................... ੬ pg. 35, 37
* i.Link refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
is used for products compliant with the i.Link
standard.
Indicators
r Power Lamp ........................................ ੬ pg. 13
Other Parts
t Battery Pack Mount ............................... ੬ pg. 7
y •Camera Sensor
Be careful not to cover this area; a sensor
necessary for shooting is built-in here.
•Remote Sensor .................................. ੬ pg. 38
u Video Light (GR-DVL45/DVL40 only) ... ੬ pg. 15
i Stereo Microphone .............................. ੬ pg. 48
o Viewfinder ........................................... ੬ pg. 11
p Speaker ............................................... ੬ pg. 29
Q Shoulder Strap Eyelets .......................... ੬ pg. 11
W Grip Strap ............................................ ੬ pg. 11
E LCD Monitor ....................................... ੬ pg. 12
R Tripod Mounting Socket ....................... ੬ pg. 11
T Stud Hole ............................................ ੬ pg. 11
INDEX Indications
60
EN
LCD Monitor/Viewfinder Indications During Recording
1*
2 3 4 5* 6* 7*
q
)
(
*
&
MANUAL
LP 35 min
W
H
A
D
T
REC
444
8
1/250
PAUSE
9
0
!
0 L PHOTO
a
b
450X
^
@
W
SOUND 32kHz 25 . 12 . 99
16 : 40
– – – – –6– – – – –
#*
$
%
BRIGHT
No.
1*
2
Function
Displays the operation mode position.
(੬ pg. 13)
(੬ pg. 19)
(੬ pg. 19)
(੬ pg. 19)
(੬ pg. 12)
(੬ pg. 10)
(੬ pg. 12)
(੬ pg. 12)
(੬ pg. 12)
(੬ pg. 17)
Appears when Auto Slow Shutter is engaged (“GAIN UP” is set to “AUTO”).
Appears when in the Squeeze or Cinema mode.
Appears when Digital Image Stabiliser (“DIS”) is engaged.
Appears when in the Record-Standby mode.
Displays the recording mode (SP or LP).
Displays the tape remaining time.
3
4
5*
6*
7*
8
Appears during recording.
9
Appears while the tape is running.
0
Appears when taking a Snapshot.
!
Appears when the wind cut mode is engaged to cut down on noise created by wind. (੬ pg. 20)
@
Displays the sound mode for approx. 5 seconds after turning on the camcorder.
Displays the date/time.
(੬ pg. 20)
(੬ pg. 21)
(੬ pg. 12)
(੬ pg. 27)
(੬ pg. 25)
(੬ pg. 26)
(੬ pg. 28)
(੬ pg. 24)
(੬ pg. 22)
(੬ pg. 14)
#*
$
Displays the brightness of the LCD monitor.
Appears when the iris is locked.
%
^
Appears when the focus is adjusted manually.
Appears when the exposure is adjusted.
Appears when the white balance is adjusted.
Displays the selected Programme AE with special effects.
Displays the selected Fade/Wipe effect.
Appears during zooming.
&
*
(
)
q
Zoom level indicator
Approximate zoom ratio
* :Setting “INDICATION” to “OFF” in the Date/Time Menu lets you remove indications marked with * from the
screen (੬ pg. 21).
EN61
LCD Monitor/Viewfinder Indications During Playback
No.
Function
Displays the sound mode.
Displays the tape speed.
1
2
3
1
2
3
(੬ pg. 31)
4
32kHz SOUND1
LP
Appears while a tape is running.
4
: Playback
3
2
6
: Fast-Forward/Shuttle search
: Rewind/Shuttle search
: Pause
64
: Forward slow-motion
16 : Reverse slow-motion
e
6e : Audio Dubbing Pause
: Audio Dubbing
25 . 12 . 99
16 : 40
4
5
Displays the date/time.
(੬ pg. 31)
TC 01 : 28 : 15
BRIGHT: Displays the brightness
of the LCD monitor.
VOLUME:Displays the speaker volume.
– – – – –6– – – – –
VOLUME
(੬ pg. 12)
(੬ pg. 29)
6
5
4
6
Displays the time code.
(੬ pg. 31)
Warning Indications
Indications
Function
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded, or when the erase protection tab is set to
“SAVE”.
(੬ pg. 9)
Appears if dirt is detected on the heads during recording.
(੬ pg. 56)
Appears if condensation occurs. When this indication is displayed, the camcorder turns
off automatically.
Appears for 10 seconds after power is turned on if there is no tape loaded.
Appears for 5 seconds after power is turned on if the lens cap is attached.
TAPE!
LENS COVER
TAPE END
Appears when the tape ends during recording or playback.
Appears when Audio Dubbing is unavailable.
(੬ pg. 13)
(੬ pg. 48)
ERROR!
REFER MANUAL
The error indications (E01 — E06) show what type of malfunction has occured. When
an error indication appears, the camcorder turns off automatically. Remove the power
supply (battery, etc.) and wait a few minutes for the indication to clear. When it does,
you can resume using the camcorder. If the indication remains, consult your nearest
E01 — E06
JVC dealer.
(੬ pg. 53)
INDEX Terms
62
EN
A
P
AC Power Adapter/Charger .................... ੬ pg. 6, 7
Audio Dubbing ........................................ ੬ pg. 48
Auto Focus............................................... ੬ pg. 25
Auto Shut off ...................................... ੬ pg. 13, 29
Picture Wipe/Dissolve .............................. ੬ pg. 22
Playback Menu ........................................ ੬ pg. 30
Playback Special Effects ........................... ੬ pg. 29
Playback Zoom ........................................ ੬ pg. 29
Power Switch Position ............................. ੬ pg. 13
Programme AE With Special Effects .......... ੬ pg. 24
Provided Accessories ................................. ੬ pg. 5
B
Battery Low.............................................. ੬ pg. 61
Battery Pack ..................................... ੬ pg. 6, 7, 55
Brighten The LCD Monitor ....................... ੬ pg. 12
R
Random Assemble Editing ................ ੬ pg. 42 – 47
Record-Standby ....................................... ੬ pg. 12
Recording Menu ...................................... ੬ pg. 19
Recording Mode ...................................... ੬ pg. 10
Remote Control........................................ ੬ pg. 38
Rewind The Tape ..................................... ੬ pg. 29
C
Charge The Battery Pack ............................ ੬ pg. 6
Cinema .................................................... ੬ pg. 19
Classic Film ............................................. ੬ pg. 24
Clean The Camcorder .............................. ੬ pg. 54
Connections........................... ੬ pg. 7, 32 – 37, 43
S
D
Self-Recording ......................................... ੬ pg. 13
Sepia ........................................................ ੬ pg. 24
Set Remote Control/VCR Code ................. ੬ pg. 42
Shoulder Strap Attachment ....................... ੬ pg. 11
Shutter Speed ........................................... ੬ pg. 24
Shuttle Search .......................................... ੬ pg. 29
Slow-Motion Playback ............................. ੬ pg. 29
Slow Shutter............................................. ੬ pg. 24
Snapshot Mode ........................................ ੬ pg. 17
Sound Mode ............................................ ੬ pg. 31
Specifications........................................... ੬ pg. 63
Squeeze ................................................... ੬ pg. 19
Still Playback ........................................... ੬ pg. 29
Strobe ...................................................... ੬ pg. 24
System Menu ........................................... ੬ pg. 20
Darken The LCD Monitor ........................ ੬ pg. 12
Date/Time Display ............................. ੬ pg. 21, 31
Date/Time Settings ..................................... ੬ pg. 8
Demonstration Mode ............................... ੬ pg. 20
Digital Dubbing ....................................... ੬ pg. 37
Digital Zoom ..................................... ੬ pg. 14, 19
DIS (Digital Image Stabiliser).................... ੬ pg. 19
Dioptre Adjustment .................................. ੬ pg. 11
Dubbing .................................................. ੬ pg. 36
E
Erase Protection ......................................... ੬ pg. 9
Exposure Control ..................................... ੬ pg. 26
F
T
Fade-In/Out ............................................. ੬ pg. 22
Tele Macro ............................................... ੬ pg. 20
Time Code ............................................... ੬ pg. 16
Tripod Mounting ...................................... ੬ pg. 11
Twilight .................................................... ੬ pg. 24
Fast-Forward The Tape ............................. ੬ pg. 29
G
Gain Up................................................... ੬ pg. 19
Grip Adjustment....................................... ੬ pg. 11
U
I
Unload A Tape ........................................... ੬ pg. 9
Iris ........................................................... ੬ pg. 27
V
Iris Lock ................................................... ੬ pg. 27
Video Echo .............................................. ੬ pg. 24
J
Video Light .............................................. ੬ pg. 15
Journalistic Shooting ................................ ੬ pg. 13
W
L
White Balance ......................................... ੬ pg. 28
Wide Mode .............................................. ੬ pg. 19
Wind Cut ................................................. ੬ pg. 20
Wipe In/Out ............................................. ੬ pg. 22
LCD Monitor/Viewfinder Indications ... ੬ pg. 60, 61
Load A Tape ............................................... ੬ pg. 9
M
Z
Manual Focus .......................................... ੬ pg. 25
Mode Menu ............................................. ੬ pg. 19
Monotone ................................................ ੬ pg. 24
Motor Drive Mode ................................... ੬ pg. 17
Zooming .................................................. ੬ pg. 14
SPECIFICATIONS
EN63
Camcorder
Speaker
Operating
temperature
Operating
humidity
Storage
temperature
: Monaural
General
Power supply
: DC 6.3 V
(Using AC Power
: 0°C to 40°C
: 35% to 80%
Adapter/Charger)
DC 7.2 V
(Using battery pack)
Power consumption
LCD monitor off,
viewfinder on
GR-DVL45/
DVL40
GR-DVL25/
DVL20
LCD monitor on,
viewfinder off
GR-DVL45/
DVL40
GR-DVL25/
DVL20
: –20°C to 50°C
: 188 (W) x 118 (H) x
88 (D) mm (with the LCD
monitor closed and the
viewfinder pushed down)
Dimensions
: Approx. 4.7 W
: Approx. 4.6 W
Weight
GR-DVL45/
DVL40
GR-DVL25/
DVL20
: Approx. 700 g
: Approx. 690 g
: Approx. 5.8 W
: Approx. 5.6 W
Connectors
S-Video
: Y : 1 Vp-p, 75 Ω, analogue
output
Video light
(GR-DVL45/
C : 0.29 Vp-p, 75 Ω, analogue
DVL40 only)
: Approx. 3.6 W
: DV Format (SD mode)
: PAL Standard
output
Format
Signal format
Video signal
recording format : Digital Component Recording
Cassette
JLIP
: ø3.5 mm, 4-pole, mini-head
jack (compatible with RC-5325
plug)
PC
: ø2.5 mm, 3-pole
: Mini DV Cassette
: SP : 18.8 mm/s
LP : 12.5 mm/s
Video output
: 1 Vp-p, 75 Ω unbalanced,
Tape Speed
analogue output
Audio output
: –8 dBs, 1 kΩ analogue output,
Maximum
recording time : SP : 60 min.
stereo
DV input/output : 4-pin, IEEE1394 compliant
LP : 90 min.
(using M-DV60ME cassette)
Pickup
Lens
: 1/4" CCD
: F 1.6, f = 3.9 to 62.4 mm, 16:1
Power Zoom Lens
AC Power Adapter/Charger
AA-V20A or AA-V20EA
Filter diameter
LCD monitor
GR-DVL45/
DVL40
: ø40.5 mm
Power
requirement
: AC 110 V to 240 V`, 50/60 Hz
: 3.5" diagonally measured, LCD
panel/TFT active matrix system
Power
consumption
Output
: 23 W
GR-DVL25/
DVL20
: 2.5" diagonally measured, LCD
panel/TFT active matrix system
Charge
: DC 7.2 V
: DC 6.3 V
, 0.77 A
, 1.8 A
Viewfinder
VTR
GR-DVL45/
Dimensions
Weight
AA-V20A
AA-V20EA
: 68 (W) x 38 (H) x 110 (D) mm
DVL40
: Electronic viewfinder with 0.55"
colour LCD
: Approx. 255 g
: Approx. 260 g
GR-DVL25/
DVL20
: Electronic viewfinder with 0.24"
black/white LCD
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to
change without notice.
EN
VICTOR COMPANY OF JAPAN, LIMITED
®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.
COPYRIGHT© 1999 VICTOR COMPANY OF JAPAN, LTD.
0P8ri9n9teAdYiVn*JaUpNa*nVP
A/EA
|