COMPACT VHS CAMCORDER
ENGLISH
GR-FX60
INSTRUCTIONS
LYT0297-001A
EN
MAJOR FEATURES
EN3
Programme AE with Special
Effects (੬ pg. 26, 27)
Picture Stabilizer (੬ pg. 23)
Ⅲ Electronic Fog Filter
Ⅲ ND Effect
Ⅲ Sepia
Ⅲ Twilight
Ⅲ Sports
Ⅲ Nega/Posi
Ⅲ 1/2000 sec. High Speed Shutter
Digital Hyper Zoom
(੬ pg. 22)
Zoom in
Digital Still Camera Built-in
(PC communication capable)
(੬ pg. 16 – 19, 46 – 53)
Zoom out
Menu Adjustment
(੬ pg. 30, 31, 32)
Integrated Auto Light
(੬ pg. 24)
Ⅲ Camcorder is designed exclusively for the
VHS-C video cassette. Only cassettes marked
VHS-C can be used with this unit.
Ⅲ HQ VHS is compatible with existing VHS
equipment.
CONTENTS
4
EN
GETTING STARTED
6 – 13
Power............................................................................................................ 6
Clock (Lithium) Battery Insertion/Removal ................................................................ 8
Date/Time Settings............................................................................................ 9
Tape Length Setting .......................................................................................... 10
Loading/Unloading A Cassette............................................................................. 11
Grip Adjustment .............................................................................................. 12
Viewfinder Adjustment ..................................................................................... 12
Shoulder Strap Attachment ................................................................................. 13
Tripod Mounting .............................................................................................. 13
VIDEO RECORDING
14 – 15
Basic Recording............................................................................................... 14
DIGITAL STILL CAMERA (D.S.C.) SHOOTING
16 – 19
Basic Shooting ................................................................................................ 16
RECORDING
20 – 39
Basic Features ................................................................................................ 20
Advanced Features........................................................................................... 25
VIDEO PLAYBACK
40 – 43
Basic Playback................................................................................................ 40
Features ....................................................................................................... 41
Using The Cassette Adapter ................................................................................ 43
PLAYBACK
44 – 45
Basic Connections And Tape Dubbing ...................................................................... 44
D.S.C. PLAYBACK
46 – 53
Basic Playback................................................................................................ 46
Connection .................................................................................................... 47
Advanced Features........................................................................................... 48
EN5
54 – 62
USING THE REMOTE CONTROL UNIT
Random Assemble Editing .................................................................................. 56
Insert Editing (VIDEO)....................................................................................... 60
Insert Editing (Insert A Still Image From The Built-in Memory Onto A Tape) ....................... 61
Audio Dubbing ................................................................................................ 62
TROUBLESHOOTING
63 – 65
INDEX
66 – 69
Controls, Connectors And Indicators ...................................................................... 66
Indications..................................................................................................... 68
CAUTIONS
70 – 72
73
SPECIFICATIONS
OPTIONAL ACCESSORIES
73
PROVIDED ACCESSORIES
•AC Power Adapter/
Charger AA-V15EG
•Cassette Adapter C-P7U
•Battery Pack BN-V12U
•Cable Adapter
•Remote Control
Unit RM-V709U
•Shoulder Strap
•DC Cord
•Audio/Video (A/V) cable
(for Windows®)
•Editing cable
•Lithium Battery CR2025 x 2
(for clock operation and
remote control unit)
•CD-ROM including two
software programmes
•PC Connection Cable x 1
GETTING STARTED
6
EN
Marks
Power
This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
To AC outlet
CHARGE indicator
NOTES:
● No function is available without power supply.
● Use only the specified power supply.
● Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
REFRESH switch
SUPPLY POWER
REFRESH indicator
1 Connect the charger’s AC power cord to a wall outlet.
ATTACH BATTERY PACK
REFRESH
2 Align the marks and slide the battery pack in the
The AC Power Adapter/Charger features a
REFRESH function that allows you to fully
discharge the battery pack before recharg-
ing.
direction of the arrow until it locks in place.
•The CHARGE indicator begins blinking to indicate
charging has started.
Perform the REFRESH function after no less
than 5 chargings.
DETACH BATTERY PACK
3 When the CHARGE indicator stops blinking but stays
To discharge the battery . . .
lit, charging is finished. Slide the battery pack
opposite the direction of the arrow.
.... attach the battery pack to the adapter as
shown in the above illustration. Then
push REFRESH. The REFRESH indicator
lights when discharging starts, and goes
out when discharging is complete.
Battery pack
BN-V12U
BN-V20U
Charging time
approx. 1 hr. 10 min.
approx. 1 hr. 50 min
Discharging time
approx. 3 hrs. 30 min.
approx. 6 hrs. 40 min.
USING THE BATTERY PACK
A
Hook on.
B Push in.
ATTACH BATTERY PACK
1 Hook its end to the camcorder (
) and push the
battery pack in until it locks in place ( ) .
DETACH BATTERY PACK
2 Slide BATTERY RELEASE and pull out the battery
pack.
Battery pack
BN-V12U
BN-V20U
Approximate recording time (unit: min.)
65 (40)
105 (65)
BATTERY RELEASE
(
) : when the video light is on.
INFORMATION:
VU-V856KIT is a set composed of the BN-V856U battery
pack and AA-V80EG AC Power Adapter/Charger.
The BN-V856U battery pack provides approx. 7 hours of
recording time when the video light is off. Also read
thoroughly the VU-V856KIT’s instruction manuals.
It is impossible to charge the BN-V856U battery pack
using the provided AC Power Adapter/Charger. Use the
optional AA-V80EG AC Power Adapter/Charger.
ATTENTION:
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
EN7
Charge Marker
A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colours are provided (red and black)—you
choose which one means charged and which means
discharged.
Charge marker
NOTES:
● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the
frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.
● Charging times noted on page 6 are for a fully discharged battery pack, and discharging times are for a fully
charged battery pack.
● Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.
● Perform the REFRESH function after no less than 5 chargings.
● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does
not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.
● High temperatures can damage the battery pack, so use only where good ventilation is available. Do not
allow it to discharge in a container, such as a bag.
● If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.
● Remove the battery pack from the adapter immediately after discharging.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● Make sure you unplug the DC cord before charging or discharging the battery pack.
● The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been
stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The
CHARGE indicator should blink during recharging. If it doesn’t, contact your nearest JVC dealer.
USING AC POWER
To AC outlet
To DC IN jack
Use the AC Power Adapter/Charger (connect as
shown in the illustration).
DC OUT
terminal
NOTES:
● The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
● When using the DC cord, make sure you connect
the end of the cord with the core filter to the
camcorder. The core filter reduces interference.
AC Power
Adapter/Charger
AA-V15EG
DC Cord
USING A CAR BATTERY
Use the optional Car Battery Charger/Adapter
(connect as shown in the illustration).
To car’s cigarette
lighter socket
NOTES:
● When using the car battery, leave the engine
idling.
● The optional Car Battery Charger/Adapter (BH-V3E)
can also be used to charge the battery pack (except
BN-V20U/V856U).
● When using the optional Car Battery Charger/
Adapter, refer to the respective instruction booklet.
Car Battery
Charger/Adapter
BH-V3E (optional)
GETTING STARTED (cont.)
8
EN
Slot
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
SWITCH OFF POWER
1 Switch off the unit’s power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).
REMOVE BATTERY HOLDER
2 Pull out the battery holder.
Battery holder
INSERT BATTERY IN HOLDER
3 Insert the battery in the holder, and be sure to have
the “+” mark visible.
RE-INSERT HOLDER
4 Slide the holder back into the slot until you hear a
click.
NOTES:
● See “SAFETY PRECAUTIONS” (੬ pg. 2) for information
on safe handling of lithium batteries.
● To avoid losing the battery and/or battery holder, place
the camcorder with the grip side up as shown in the
illustration when inserting/removing the battery.
EN9
Date/Time Settings
SELECT OPERATION SYSTEM AND
1 MODE
System
Select Switch
Set the System Select Switch to “VIDEO” or “D.S.C.” ,
and set the Power Switch to “PRO.”.
•The power lamp comes on.
ACCESS MENU SCREEN
2 Press MENU.
SELECT FUNCTION
MENU Button
3 Rotate the Select Dial to move the highlight bar to
“DATE/TIME”, then press it. The DATE/TIME Menu
appears.
Power lamp
•If you decide you want to return the date and time
to the previous settings, rotate the Select Dial to
move the highlight bar to “EXIT” and press it, then
go to step 7.
•If you want to set only the time without changing
the date, go to step 5.
Select Dial
Power Switch
SET DATE
4 Rotate the Select Dial to move the highlight bar to the
Display
item you want to set and then press it. When the
setting begins blinking, rotate the Select Dial until the
correct setting appears and then press it. The setting
stops blinking.
Menu Screen
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
FINE
FULL
•Repeat this procedure until you’re satisfied with the
Date settings (“YEAR”, “MONTH” and “DAY”).
SNAPSHOT
4RETURN
SET TIME
5 Rotate the Select Dial to move the highlight bar to
DATE TIME
DATE/TIME Menu
24-hour indication
“TIME” and then press it. When the hour setting
begins blinking, rotate the Select Dial until the correct
setting appears and then press it. When the hour
setting stops blinking and the minute setting begins
blinking, rotate the Select Dial until the correct setting
appears and then press it. The minute setting stops
blinking.
YEAR
1999
MONTH
DAY
1
1
TIME
22 : 50
EXIT
START CLOCK OPERATION
4
NEXT
6 When none of these settings (“YEAR”, “MONTH”,
M.W.B.
AUTO
ON
D . ZOOM
“DAY”, “TIME”) blinks, rotate the Select Dial to move
the highlight bar to “EXIT”, and press it. The Menu
Screen reappears with the highlight bar on
“RETURN”.
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
FINE
FULL
SNAPSHOT
4RETURN
CLOSE MENU SCREEN
7 Press the Select Dial.
NOTE:
To display the date and time in the camcorder’s display
and on a connected TV, see “Date/Time Insert”
(੬ pg. 28).
GETTING STARTED (cont.)
10
EN
Tape Length Setting
Set the tape length according to the length of the tape
used.
System
Select Switch
ACCESS MENU SCREEN
1 First set the System Select Switch to “VIDEO”, then
set the Power Switch to “PRO.”. Press MENU.
SELECT FUNCTION
2 Rotate the Select Dial to move the highlight bar to
“TAPE LENGTH”, then press it. The TAPE LENGTH
Setting Menu appears.
MENU Button
SET TAPE LENGTH
3 Rotate the Select Dial to move the highlight bar to the
correct setting. T30=30 minutes of recording time,
T45=45 minutes, and T60=60 minutes.
•If you decide you want to return the tape length to
the previous setting, rotate the Select Dial to move
the highlight bar to “EXIT”.
Select Dial
Viewfinder
Power Switch
CLOSE MENU SCREEN
4 Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
Tape length indicator
T45
NOTE:
The tape remaining time (੬ pg. 15) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
Display
Menu Screen
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
FINE
FULL
SNAPSHOT
4RETURN
TAPE LENGTH
TAPE LENGTH
Setting Menu
T30
T45
T60
EXIT
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T60
PICTURE
FINE
FULL
SNAPSHOT
4RETURN
EN11
Cassette holder
Loading/Unloading A Cassette
OPEN CASSETTE HOLDER
1 Slide EJECT until the holder opens. Do not use force
to open.
INSERT/REMOVE CASSETTE
2 Make sure the label is facing outward.
CLOSE CASSETTE HOLDER
3 Press PUSH and make sure the holder is closed and
locked.
NOTES:
PUSH Button
EJECT Switch
● The cassette holder can’t be opened unless a power
supply is attached.
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
● Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes
have removable tabs. If the tab has been removed, cover
the hole with adhesive tape.
Turn to take
up slack.
● The cassette holder cannot be opened while the
camcorder is in the record mode.
Erase Protection
Gear
GETTING STARTED (cont.)
Grip Adjustment
12
EN
Power Zoom Lever
EXPAND LOOP
1 Separate the Velcro strip.
INSERT HAND
2 Pass your right hand through the loop and grasp the
grip.
ADJUST STRAP LENGTH
3 Adjust so your thumb and fingers can easily operate
the Recording Start/Stop Button and Power Zoom
Lever. Refasten the Velcro strip.
Recording Start/Stop Button
Viewfinder Adjustment
SELECT OPERATION MODE
1 Set the Power Switch to “CAMERA” (“AUTO” or
3
“PRO.”).
2
POSITION VIEWFINDER
2 Adjust the viewfinder manually for best viewability
180°
(see illustration on left).
ADJUST DIOPTRE
3 Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
1
Set “POWER” to
“CAMERA”
(“AUTO” or “PRO.”)
PAUSE
EN13
Shoulder Strap Attachment
ATTACH STRAP
1 Following the illustration at left, thread the strap
through the top of the eyelet 1, then fold it back and
thread it through the buckle 2. Repeat the procedure
to attach the other end of the strap to the other eyelet
3, making sure the strap is not twisted.
1
4
2
ADJUST LENGTH
2 Adjust as shown in the illustration at left 4.
3
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilise the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
VIDEO RECORDING Basic Recording
14
EN
System Select Switch
LENS COVER
Open/Close Ring
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (੬ pg. 6)
● Tape Length Setting (੬ pg. 10)
● Grip Adjustment (੬ pg. 12)
● Viewfinder Adjustment (੬ pg. 12)
LOAD A CASSETTE
1 Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
ENTER RECORD-STANDBY MODE
Power Switch
Recording Start/Stop Button
EJECT Switch
2 Turn the LENS COVER Open/Close Ring to open the
lens cover. Set the System Select Switch to “VIDEO”,
then set the Power Switch to “CAMERA” (“AUTO” or
“PRO.”).
Power lamp
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.
Power Switch
START SHOOTING
3 Press the Recording Start/Stop Button.
Tally lamp
(lights while recording is in progress)
•“
” appears in the viewfinder while recording is
in progress.
Power Switch Position
According to the Power Switch position you have selected, the following functions are available:
AUTO
(Full Auto mode):
PRO.
(PRO. mode):
POWER OFF:
Allows you to record using
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.
Allows you to switch off the
camcorder.
NO special effects or manual
adjustments. Suitable for
standard recording.
EN15
Tape remaining time indicator
STOP RECORDING
4 Press the Recording Start/Stop Button again to stop
25MIN
MIN
(Now calculating)
recording.
•The camcorder re-enters the Record-Standby mode.
60MIN
59MIN
NOTES:
● The cassette holder cannot be opened unless a power
supply is attached.
● There may be a delay after you slide EJECT until the
holder opens. Do not use force.
3MIN
● The tape remaining time is only displayed in the
viewfinder as shown.
● The remaining time indicated in the viewfinder is
approximate.
2MIN
(Blinking)
● The time required to calculate the remaining tape
length, and the accuracy of the calculation, may vary
according to the type of tape used.
1MIN
(Blinking)
● The tape remaining time indicator is correct only if the
correct tape length has been selected (੬ pg. 10).
● “TAPE END” appears when the tape reaches its end, and
the power goes off automatically if left in this condition
for 5 minutes. “TAPE END” also appears when a cassette
whose tape is already at its end is loaded.
0MIN
(Blinking)
● If the Record–Standby mode continues for 5 minutes
without performing Zoom or any other operations, the
camcorder’s power shuts off automatically. Set the
Power Switch to “POWER OFF”, and then back to
“CAMERA” to turn the camcorder on again.
● If the Recording Start/Stop button is pressed after the
Record-Standby mode has continued for over
5 minutes, recording may not start immediately.
● If you are recording on a cassette from the middle (such
as when a tape is removed and re-inserted during
recording), use the Retake function (੬ pg. 23) to find
the end of the last recording so you don’t erase any of it.
● The LENS COVER warning blinks for about 5 seconds
when the camcorder is turned on with the cover closed.
● To turn the tally lamp off during recording, refer to pgs.
30 and 32.
Recording Start/Stop Button
DISPLAY Button
Viewfinder Indications
Press DISPLAY to make the following indications appear/
disappear from the camcorder’s display: cassette warning,
tape remaining time, battery pack remaining power
indicator and tape length indicator (੬ pg. 68, 69).
PRESS DISPLAY BUTTON
1 To turn off the indications, press DISPLAY for more
than 1 second.
Press again for more than 1 second to make the
indications reappear.
NOTE:
Even if the indications are off, the tape remaining time
appears blinking when the tape is near its end, and the
battery pack remaining power indicator appears blinking
when the power is almost gone.
DIGITAL STILL CAMERA (D.S.C.) SHOOTING
16
EN
LENS COVER
Basic Shooting
SNAPSHOT Button
Open/Close Ring
When shooting a still image, it is not recorded onto the
tape, but it is stored in the camcorder's built-in memory in
the selected Picture Mode. A stored still image data can be
transferred to a PC, saved, and processed using a Paint
Software programme (੬ pg. 47).
A still image processed on the PC can be also inserted
onto a tape (੬ pg. 47, 61).
System
Select
Switch
MODE SELECTION
SELECT OPERATION SYSTEM AND
1 MODE
Turn the LENS COVER Open/Close Ring to open the
lens cover, then set the System Select Switch to
“D.S.C.”. Set the Power Switch to “PRO.”.
MENU Button
Power lamp
• The power lamp lights and an image appears.
SELECT PICTURE MODE
2 Do steps 2 and 3 of “OPERATION” on pg. 18.
Set “PICTURE” to “FINE” or “STANDARD” in the
Menu Screen as required.
Select Dial
Display
Power Switch
•There are two modes: FINE allows you to shoot up
to approx. 30 still images with higher resolution,
and STANDARD allows you to shoot up to approx.
60 still images with lower resolution.
Menu Screen
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
SELECT SNAPSHOT MODE
PICTURE
FINE
FULL
3 Rotate the Select Dial to move the highlight bar to
SNAPSHOT
“SNAPSHOT”, and press it. The SNAPSHOT Menu
appears.
4
RETURN
Rotate the Select Dial to move the highlight bar to the
appropriate mode among the 5 Snapshot modes
(੬ pg. 17), and press it. Selection is complete.
SNAPSHOT
SNAPSHOT Menu
FULL
PIN UP
MULTI
MULTI
4
9
CLOSE MENU SCREEN
M.DRIVE
4 The Menu Screen reappears with the highlight bar on
“RETURN”. Press the Select Dial again to close the
Menu Screen.
EXIT
STILL IMAGE STORAGE
Menu Screen
4
NEXT
M.W.B.
AUTO
ON
TAKE SNAPSHOT
D . ZOOM
1 Press SNAPSHOT.
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
•Regardless of the Power Switch position (“AUTO”
or “PRO.”), Snapshot recording takes place using
the selected Snapshot mode.
PICTURE
FINE
PIN-UP
SNAPSHOT
4RETURN
•A still image is stored in the built-in memory and
displayed for approx. 2 seconds. While the still
image remains displayed, that image is in the
process of being stored in memory, and it is
therefore impossible to take another shot during that
time. When the still image disappears and the scene
you are currently aimed at appears on the screen,
you may take another shot.
Normal Screen
During Snapshot mode
P
No display
(Full)
(Pin-Up)
P
MD (M.DRIVE)
M4 (MULTI-4)
•The remaining number of shots available is
displayed.
M9 (MULTI-9)
EN17
Remaining number
of shots
NOTES:
● The remaining number of shots varies according to the
selected Picture Mode. In the “STANDARD” mode,
twice as many still images can be shot as in the “FINE”
mode.
FINE 12
30 29
1
0
(Blinking)
● Some sample images have been stored in the built-in
memory at the factory.
If you wish to delete them, first remove the “Protect”
function (੬ pg. 51), then perform the “Delete” function
(੬ pg. 52).
Pictrue mode
display
● When the Power Switch is set to “AUTO”, it is not
possible to select the Snapshot mode. You can use the
Snapshot mode you selected in the “PRO.” mode.
● If a Snapshot is taken while the camcorder is in the
WIDE mode (੬ pg. 31), the Snapshot image is
recorded without the black bars at the top and bottom of
the screen.
FULL*
(Snapshot mode with
no frame)
PIN-UP*
(Pin-Up mode)
MULTI-4 **
(Multi-Analyzer 4)
MULTI-9**
(Multi-Analyzer 9)
* There is a momentary camera shutter-type blackout
together with the image.
** Continuous camera shutter-type blackout takes place 4
or 9 times with the image, like serial photography, then
the 4 or 9 still images you took are displayed.
M. DRIVE
ߛ (Motor Drive mode)
ߛ Stores 4 still images continuously for approx. 2 seconds. During still image storage, “MD” blinks and the 4 still
images are displayed in the order that you took them.
There is no sound effect of a shutter closing.
CONTINUED ON NEXT PAGE
D.S.C. SHOOTING (cont.)
18
EN
SNAPSHOT Button
FEATURE: Picture Mode Setting
PURPOSE:
There are two image settings you can choose from
when storing in the camcorder's memory: FINE and
STANDARD. FINE allows you to shoot up to approx.
30 still images in a format based on JPEG (Joint
Photographic Experts Group). Since the quality of
image is better than “STANDARD”, “FINE” is more
suitable for post-production on a PC. “STANDARD”
allows you to shoot up to approx. 60 still images in a
format based on JPEG (Joint Photographic Experts
Group). Since in this mode, twice as many still images
can be shot as in the “FINE” mode, select this mode
when you wish to shoot many still images.
System
Select Switch
MENU Button
Power lamp
OPERATION:
1) Turn the LENS COVER Open/Close Ring to open the
lens cover, and set the System Select Switch to
“D.S.C.”. Set the Power Switch to “PRO.”.
2) Press MENU. The Menu Screen appears.
Ⅲ If you wish the Picture Mode to return to the previous
setting, rotate the Select Dial to move the highlight
bar to “RETURN”.
3) Rotate the Select Dial to move the highlight bar to
“PICTURE”, and press it. The PICTURE Menu
appears.
Rotate the Select Dial to move the highlight bar to
“FINE” or “STANDARD”, and press it. Selection is
complete.
4) The Menu Screen reappears with the highlight bar
on “RETURN”. Press the Select Dial again to close
the Menu Screen.
Select Dial
Power Switch
Display
4
NEXT
Menu Screen
PICTURE Menu
Menu Screen
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
FINE
FULL
SNAPSHOT
4
RETURN
PICTURE
FINE
STANDARD
EXIT
4
NEXT
M.W.B.
D . ZOOM
AUTO
ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
STD
FULL
SNAPSHOT
4RETURN
Normal Screen
STD 12
Remaining number
of shots
60
59
1
0
(Blinking)
Picture mode display
STD FINE
EN19
NOTES:
● The picture mode’s factory-preset is FINE.
● Some sample images have been stored in the built-in memory at the factory.
If you wish to delete them, first remove the “Protect” function (੬ pg. 51), then perform the “Delete”
function (੬ pg. 52).
● To store the still images you shot, we recommend that you transfer them to a computer and save them on
disk (੬ pg. 47), or transfer them to a VCR connected to the camcorder and record them onto a tape.
● When the remaining number indicator displays “0” (blinking), it is not possible to continue storing pictures
until you delete some shots to make room for new ones. Perform “DELETE” function in the Menu Screen
to remove pictures you do not need (੬pg. 52).
● The Picture Mode can be switched to either “FINE”or “STANDARD”. Since the remaining number of shots
available depends on the selected Picture Mode, switching the Picture Mode will vary this number.
● The LENS COVER warning blinks for approx. 5 seconds when the camcorder is turned on with the cover
closed.
● When SNAPSHOT is pressed with the System Select Switch set to “VIDEO”, the picture is stored in the
camcorder's built-in memory (in the Snapshot mode selected in the “VIDEO” system) and also onto the tape
(if a tape is in the camcorder) (੬ pg. 20).
● When you shoot in a dark environment, the still image will become coarse and its true colours will be lost.
RECORDING Basic Features
20
EN
LENS COVER
Open/Close Ring
Snapshot
SNAPSHOT Button
This interesting feature lets you record two types of digital
still images that look like photographs onto a tape, as well
as keeping them in the camcorder’s built-in memory. It is a
great way to spice up footage of events such as parties,
weddings and graduations.
SNAPSHOT MODE SELECTION
SELECT OPERATION SYSTEM AND
1 MODE
Turn the LENS COVER Open/Close Ring to open the
lens cover, and set the System Select Switch to
“VIDEO”. Set the Power Switch to “PRO.”
System Select Switch
MENU Button
•The power lamp lights and the camcorder enters
Record-Standby mode.
Power lamp
SELECT SNAPSHOT MODE
2 Press MENU. The Menu Screen appears.
Rotate the Select Dial to move the highlight bar to
“SNAPSHOT”, and press it. SNAPSHOT Menu
appears.
Rotate the Select Dial to move the highlight bar to
“FULL” or “PIN-UP”, and press it. Selection is
complete.
Select Dial
Display
Power Switch
Menu Screen
CLOSE MENU SCREEN
4
NEXT
3 The Menu Screen reappears with the highlight bar on
M.W.B.
AUTO
ON
D . ZOOM
“RETURN”. Then press the Select Dial to close the
Menu Screen.
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
FINE
SNAPSHOT
FULL
4RETURN
SNAPSHOT
SNAPSHOT Menu
FULL
PIN UP
EXIT
Menu Screen
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
PICTURE
FINE
PIN-UP
SNAPSHOT
4RETURN
P
(Pin-Up)
P
No display
(Full)
EN21
SNAPSHOT
SNAPSHOT RECORDING
TAKE SNAPSHOT
1 Press SNAPSHOT.
Display (ex. Pin-Up)
•Regardless of the Power Switch position (“AUTO”
or “PRO.”), Snapshot recording takes place using
the selected Snapshot mode.
•A still image is recorded onto the tape and into the
camcorder’s built-in memory.
•First there is a momentary camera shutter-type
blackout together with the sound effect of a shutter
closing, then a still image appears. The scene you
are currently aimed at starts in the centre of a black
screen and wipes in toward the corners.
The screen changes as shown in the illustrations 1
to 5 and the screens 1 to 5 are recorded onto the
tape in the selected mode. Only the still image 3 is
stored in the built-in memory in the selected mode,
then the camcorder resumes normal recording.
1
2
3
4
5
If you press during Record-Standby mode . . .
.... the screens 1 to 3 are recorded onto the tape in
the selected mode. Then the camcorder re-enters
the Record-Standby mode.
NOTES:
● When the remaining number indicator displays “0”
(blinking), the still image will be recorded onto the
tape but not in the built-in memory. If you wish to store
a still image in the built-in memory, ੬ pg. 52.
● The Picture Mode can be switched to either “FINE” or
“STANDARD”. Since the remaining number of shots
available depends on the selected Picture Mode,
switching the Picture Mode will vary this number.
● If SNAPSHOT is pressed with the System Select Switch
set to “D.S.C.”, ੬ pg. 16.
● Image data stored in the camcorder’s built-in memory
can be transferred to a Windows® PC and saved using
the provided image transfer software, Picture Navigator
(੬ pg. 47). The image data transferred to a Windows®
PC can also be further processed using Mr. Photo Gold.
● If a snapshot is taken while the camcorder is in the
WIDE mode (੬ pg. 31), the snapshot image is
recorded without the black bars at the top and bottom
of the screen.
● When a Snapshot is taken in a dark environment, the
still image recorded onto the tape and stored in
memory will become coarse and its true colours will
be lost.
FULL
(Snapshot mode with
no frame)
PIN-UP
(Pin-Up mode)
RECORDING Basic Features (cont.)
22
EN
FEATURE: Zooming
Zoom in
PURPOSE:
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
Digital circuitry extends the maximum magnification
offered by optical zoom. This system is called Digital
Zoom.
Zoom out
OPERATION:
Zoom In
Push the Power Zoom Lever towards “T”.
Zoom Out
Display
Push the Power Zoom Lever towards “W”.
Ⅲ The quicker you push the Power Zoom Lever, the
quicker the zoom action.
Zoom indicator bar
Zoom level indicator
1X
NOTES:
● Focusing may become unstable during Zooming. In
this case, set the zoom while in Record–Standby,
lock the focus by using the manual focus
(੬ pg. 35), then zoom in or out in Record mode.
● The zoom level indicator (5) moves during zoom.
Once the zoom level indicator reaches the top of
the zoom indicator bar, all magnification from that
point is through digital processing.
Approximate zoom ratio
Power Zoom Lever
● When using Digital Zoom, the quality of image may
suffer. To deactivate Digital Zoom, set “D.ZOOM”
to “OFF” in the Menu Screen (੬ pg. 31).
Power Switch
EN23
P. STABILIZER Button
FEATURE: Quick Review
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Press “ ” and release quickly during the Record–
Standby mode.
Ⅲ Tape is rewound for about 2 seconds and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
FEATURE: Retake
RETAKE (R/F) Button
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press either RETAKE to reach the start point for new
recording. Pressing “F” forwards the tape and
pressing “R” reverses it.
Display
3) Press the Recording Start/Stop Button to start
recording.
Picture stabilizer
indicator
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
FEATURE: Picture Stabilizer
PURPOSE:
To compensate for unstable images caused by camera-
shake, particularly at high magnification.
OPERATION:
1) Press P. STABILIZER. “
”appears.
Ⅲ To switch off the Picture Stabilizer, press
P. STABILISER. The indicator disappears.
NOTES:
● Accurate stabilisation may not be possible if hand
shake is excessive, or under the following conditions:
•When shooting subjects with vertical or horizontal
stripes.
•When shooting dark or dim subjects.
•When shooting subjects with excessive backlighting.
•When shooting scenes with movement in various
directions.
•When shooting scenes with low-contrast backgrounds.
● Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.
● The “
” indicator appears blinking if the
Stabilizer cannot be used.
RECORDING Basic Features (cont.)
24
EN
FEATURE: Video Light
PURPOSE:
To brighten the scene when natural lighting is too dim.
OPERATION:
1) Set the LIGHT OFF/AUTO/ON Switch as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on the
subject.
ON
: Always keeps the light on as long as the
camcorder is turned on.
LIGHT OFF/AUTO/ON Switch
Ⅲ The video light can only be used with the
camcorder’s power on.
Ⅲ It is recommended to set the white balance
(੬ pg. 36) to
when you use the video light.
Ⅲ When not using the video light, turn it off to save
battery power.
DANGER
NOTES:
Ⅲ The video light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
Ⅲ Do not place the camcorder into the
carrying case immediately after using the
video light, since it remains extremely
hot for some time.
● Even if the battery indicator (
) does not blink if
the battery pack’s charge is low, the camcorder may
turn off automatically when you turn on the video
light, or when you start recording with the video light
turned on.
● When the LIGHT OFF/AUTO/ON Switch is set to
“AUTO”:
Ⅲ When operating, keep a distance of
about 30 cm. between the video light
and people or objects.
Ⅲ Do not use near flammable or explosive
materials.
Ⅲ It is recommended that you consult your
nearest JVC dealer for replacing the video
light.
•Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using the
LIGHT OFF/AUTO/ON switch.
•While the “Sports” or “High Speed Shutter” mode
(੬ pg. 27) is engaged, the light is likely to stay on.
•While the “Twilight” mode (੬ pg. 27) is engaged,
the light will not activate.
RECORDING Advanced Features
EN25
[Ex.: Fader]
Fade in
Fade/Wipe
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record–Standby mode.
SELECT OPERATION SYSTEM AND
1 MODE
Fade out
Set the System Select Switch to "VIDEO", and set the
Power Switch to “PRO.”.
Display
After 2 sec.
ENGAGE FADE- OR WIPE-STANDBY
2 MODE
MOSAIC
Press EFFECT to cycle through the modes as shown at
left. Once the desired mode appears, it is selected
and reserved.
•The selected mode’s name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains.
START OR END RECORDING
FADER
MOSAIC
SHUTTER
SLIDE
3 Press the Recording Start/Stop Button to activate fade-
in/out or wipe-in/out.
TO CANCEL FADE- OR WIPE-STANDBY
4 MODE
Press EFFECT repeatedly until “OFF” appears.
•“OFF” is displayed for approx. 2 seconds and the
fade/wipe standby mode is canceled.
OFF
OFF
(No indication)
FADER
Fades in/out to a black screen.
System Select Switch
EFFECT Button
MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic
pattern.
SHUTTER (Wipe)
A black screen moves in from the top and bottom, closing
over the image like a shutter, or a new image pushes open
the black screen vertically from the centre.
SLIDE (Wipe)
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.
Recording Start/Stop
Button
Power Switch
NOTES:
● Pressing and holding the Recording Start/Stop Button
allows you to vary the length for the image during fade
in/out or wipe in/out.
● The screen becomes slightly reddish when the Fade/
Wipe is used with Sepia (੬ pg. 27).
● With the Electronic fog filter mode (੬ pg. 27) engaged,
the image fades in/out to a white screen.
● Even if you start shooting with the Fade/Wipe indication
displayed during Digital Still Camera Shooting, the Fade/
Wipe does not function.
RECORDING Advanced Features (cont.)
26
EN
Display
SEPIA
Programme AE With Special Effects
After 2 sec.
All you have to do to access any of the variety of shooting
:
effects is press P.AE.
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.” or “VIDEO”,
and set the Power Switch to “PRO.”.
SELECT MODE
2 Press P.AE to cycle through the modes as shown on
the left.
SEPIA
•The selected mode’s name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains. The
mode is activated.
SPORTS
:
ND ND EFFECT
ND
FG
NOTES:
:
FG FOG
TWILIGHT
● Only one mode can be engaged at a time.
● The screen becomes slightly reddish when the Fade/
Wipe (੬ pg. 25) is used in the Sepia mode.
● The screen becomes slightly dark in the High Speed
Shutter mode. Use in well-lit situations.
S1/2000
● In the “High Speed Shutter” or “Sports” modes, picture
colour may be adversely affected if the subject is lit by
alternating discharge-type light sources such as
flourescent or mercury-vapour lights.
NEGA/POSI
OFF
OFF
(No indication)
P.AE Button
Power Switch
System Select Switch
EN27
Display
Mode
Display
Mode
Sepia
Twilight
SEPIA
TWILIGHT
Sepia
Twilight
The scene being shot is recorded in sepia-tinted
(reddish-brown) monochrome, giving the effect of
an older movie. Use together with Wide (੬ pg. 31)
for the authentic look of a classic Hollywood
movie.
Dusk, twilight scenery, fireworks, etc., look more
natural and dramatic. The following happens when
Twilight mode is selected:
•Auto gain control is turned off.
•White Balance is set to “
” (FINE day mode),
•When the Power Switch is set to “D.S.C.”, the
scene is stored in black-and-white in the
camcorder’s memory.
but can also be manually changed to another
mode (੬ pg. 36).
•Auto Focus becomes available only in the range of
10 m to infinity. To focus when the subject-to-
camera distance is less than 10 m, use manual
focusing (੬ pg. 35).
Sports
SPORTS
1/2000 sec.
High Speed Shutter
Sports
S1/2000
37.)
High shutter speed clearly captures fast-moving
action.
High-Speed Shutter (1/2000s.)
Captures faster action than Sports mode.
ND Effect
:
ND ND EFFECT
Nega/Posi
NEGA POSI
ND Effect
A black mist darkens the picture, as when an ND
filter is used. Helps to counter the effects of glare on
the subject.
Nega/Posi (Negative/Positive)
The colours of a picture are reversed.
Electronic
Fog Filter
:
FG FOG
Electronic Fog Filter
Makes the picture look misty white, as when an
external fog filter is attached to the lens. Softens the
image and gives it a “fantasy” look.
NEGA POSI mode
RECORDING Advanced Features (cont.)
28
EN
Date/Time Insert
This feature allows you to display the date and time in the
viewfinder, or on a connected colour monitor, as well as to
record them manually or automatically.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “VIDEO”, and set the
Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “DATE/TIME DISP.” MENU
3 Move the highlight bar to “DATE/TIME DISP.” by
rotating the Select Dial while in Record-Standby.
Then press it to display the DATE/TIME DISP. Menu.
Select Dial
Display
Power Switch
Menu Screen
SELECT THE DESIRED MODE
4 Move the highlight bar to the desired mode by
rotating the Select Dial, then press it. The desired
mode is activated.
FOCUS
AUTO
AUTO
OFF
EXPOSURE
WIDE
•You should have already performed the Date/Time
Setting procedure (੬ pg. 9). If you haven’t, do so
first.
S.LX
OFF
TITLE
DATE TIME DISP.
4RETURN
CLOSE MENU SCREEN
5 The Menu Screen reappears with the highlight bar on
DATE TIME DISP.
DATE/TIME DISP.
Menu
“RETURN”. Then press the Select Dial to close the
Menu Screen.
AUTO DATE
DATE
TIME
DATE&TIME
OFF
NOTES:
DISPLAY
● The selected display can be recorded.
● If you do not want to record the display, select the OFF
mode before shooting.
EXIT
● Even if you shoot with the date/time displayed during
Digital Still Camera Shooting, they will not be recorded.
FOCUS
EXPOSURE
WIDE
AUTO
AUTO
OFF
AUTO DATE
S.LX
OFF
TITLE
DATE TIME DISP.
● Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
4RETURN
•After changing the date.
•After loading a cassette.
•After Auto Date Record mode is selected by rotating
the Select Dial.
25 . 12 . 99
● In this mode, the date is replaced after 5 seconds with
“AUTO DATE” but this is not recorded.
AUTO DATE
25 . 12 . 99
(DATE)
22 : 50 : 00
(TIME)
25 . 12 . 99
22 : 50 : 00
(DATE&TIME)
OFF
(No indication)
EN29
Instant Titles
The camcorder has eight preset titles in memory. You can
superimpose one of them above a previously stored title as
shown in the illustration on left.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “VIDEO”, and set the
Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “TITLE” MENU
3 Move the highlight bar to “TITLE” by rotating the
Select Dial while in Record-Standby. Then press it to
display the TITLE Menu.
SELECT THE DESIRED MODE
4 Move the highlight bar to the desired mode by
Select Dial
Power Switch
rotating the Select Dial, then press it. The desired
mode is activated.
Display
•If you wish to make the title indication disappear,
select “OFF”.
Menu Screen
FOCUS
EXPOSURE
WIDE
AUTO
AUTO
OFF
CLOSE MENU SCREEN
S.LX
OFF
5 The Menu Screen reappears with the highlight bar on
TITLE
DATE TIME DISP.
“RETURN”. Then press the Select Dial to close the
Menu Screen.
4RETURN
NOTE:
TITLE
Even if you shoot with the Title displayed during Digital
Still Camera Shooting, this is not recorded.
TITLE Menu
OFF
HAPPY BIRTHDAY
HAPPY HOLIDAYS
OUR FAMILY
MOVIE STAR
PARTY TIME
MERRY CHRISTMAS
WEDDING DAY
CONGRATULATIONS
EXIT
FOCUS
EXPOSURE
WIDE
AUTO
AUTO
OFF
S.LX
OFF
TITLE
DATE TIME DISP.
4RETURN
CONGRATULATIONS
RECORDING Advanced Features (cont.)
30
EN
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
System Select Switch
SELECT OPERATION SYSTEM AND MODE
1 The operation system depends on the function you wish
to select.
Set the System Select Switch to “VIDEO” or “D.S.C.”
according to each function's “*/**” explanation
described at the bottom of pages 31 and 32, and set the
Power Switch to “PRO.”.
Select Dial
MENU Button
Menu Screen 1
ACCESS MENU SCREEN
Display
(ex. Menu Screen available
using the MENU Button)
2 Menu access depends on the function you select.
If you select the functions from the “Menu Screen
Available Using The Select Dial” described on pg. 31 . . .
.... press the Select Dial. The Menu Screen appears.
4
NEXT
M.W.B.
AUTO
ON
If you select the functions from the “Menu Screen
Available Using The MENU Button” described on
pg. 31 and 32 . . .
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
.... press MENU. The Menu Screen appears.
PICTURE
FINE
FULL
SNAPSHOT
SELECT FUNCTION
4
RETURN
3 Rotate the Select Dial to place the highlight bar on the
desired function.
Menu Screen 2
4
BACK
•To go from Menu Screen 1 to Menu Screen 2, rotate the
Select Dial to “NEXT” and press it. To go back to Menu
Screen 1 from Menu Screen 2, rotate the Select Dial to
“BACK”, and press it.
•If the setting you want cannot be found in the Menu Screen,
place the highlight bar on “RETURN”, then go to step 6.
REC. TIME
INT. TIME
OFF
OFF
TALLY LAMP ON
JLIP ID NO
07
DEMO MODE OFF
4
RETURN
MAKE SETTING
4 Press the Select Dial. The setting procedure depends on
the function you select.
REC TIME
Setting Menu
(ex. REC TIME)
If you select “FOCUS”, “EXPOSURE”, “TITLE”, “DATE/
TIME DISP.”, “DATE/ TIME”, “PICTURE” or "SNAP-
SHOT". . .
.... see respective pages (FOCUS: ੬ pg. 34, 35,
EXPOSURE: ੬ pg. 33, TITLE: ੬ pg. 29,
DATE/TIME DISP.: ੬ pg. 28, DATE/TIME: ੬ pg. 9,
PICTURE: ੬ pg. 18, SNAPSHOT: ੬ pg. 16, 21).
If you select “WIDE”, “D.ZOOM”, “TELE MACRO” or
“DEMO MODE” . . .
OFF
1 4S
1 2S
1 S
5 S
EXIT
.... the selected function’s parameter starts blinking.
Rotate the Select Dial until the desired parameter
appears. Go to step 5.
4
BACK
REC. TIME
INT. TIME
1S
OFF
TALLY LAMP ON
If you select “JLIP ID NO.” . . .
JLIP ID NO
07
DEMO MODE OFF
.... press the Select Dial so that the number blinks, then
rotate it until the desired number appears, and press
it. Then rotate the Select Dial to move the highlight
bar to “EXIT”.
4RETURN
If you select any other functions . . .
.... rotate the Select Dial to move the highlight bar to the
desired setting.
Normal Screen
• If you decide you want to return to the previous setting,
rotate the Select Dial to move the highlight bar to “EXIT”.
END SETTING
NOTE:
5 Press the Select Dial. The Menu Screen reappears with
No menu functions except “FOCUS” and
“EXPOSURE” are available while in the Record
mode.
the highlight bar on “RETURN”.
CLOSE MENU SCREEN
6 Press the Select Dial. The normal screen reappears.
EN31
MENU SCREEN EXPLANATIONS
Menu Screen Available Using The Select Dial
Adjusts focus automatically.
FOCUS
AUTO
MANU
AUTO
MANU
OFF
Allows you to adjust focus manually (੬ pg. 34, 35).
Adjusts exposure automatically.
EXPOSURE
WIDE
Allows you to adjust exposure manually (੬ pg. 33).
Does not display black bars.
Allows you to record black bars at the top and bottom of the screen
to produce a cinema-like “wide-screen” effect.
ON
If a snapshot (੬ pg. 16, 20) is taken while the camcorder is in
the WIDE mode, the snapshot image is recorded without the
black bars at the top and bottom of the screen.
To record a subject in a darkly lit environment, it is more
convenient to shoot the subject with a brighter image even if the
picture becomes slightly coarse.
S.LX
MAX
To record a subject in a dimly lit environment, it is more
convenient to shoot with a less coarse picture although the
subject becomes slightly dark.
NORMAL
OFF
Allows you to shoot dark scenes with no picture brightness
adjustment.
TITLE*
Allows you to superimpose one of eight preset titles (੬ pg. 29).
DATE/TIME
DISP.*
Makes the date/time settings appear in the camcorder or on a connected monitor
(੬ pg. 28).
Menu Screen Available Using The MENU Button
This Menu Screen cannot be accessed while recording.
AUTO
: FINE
This camcorder’s Automatic Colour Temperature system senses
the colour temperature of the ambient lighting for automatic
white balance adjustment. However, precise colour adjustment
is not possible under the following conditions:
M.W.B.
: CLOUD
• When an object is in various shades of the same colour.
• When a predominantly red or brown object is being shot outdoors.
: HALOGEN
In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (੬ pg. 36, 37).
MWB
D. ZOOM
ON
Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 16 times (the optical
zoom limit), to a maximum of 50 times digital magnification.
Digital Zoom is not available. Only optical zoom (maximum
16x magnification) can function. When set to “OFF” during
Digital Zoom, zoom magnification changes to 16x.
OFF
* Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”,
this function will not be activated although the highlight bar will move on the Menu Screen like the setting
procedure.
Functions listed without an asterisk are available with the System Select Switch set to either “D.S.C.” or
“VIDEO”.
: Factory-preset
CONTINUED ON NEXT PAGE
RECORDING Advanced Features (cont.)
Menu Screen Available Using The MENU Button (cont.)
32
EN
TELE MACRO
OFF
ON
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance of
more than 1m to the subject, the lens is out of focus at the
maximum telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx. 60 cm.
•Depending on the zoom position, the lens may go out of focus.
DATE/TIME
Allows you to set the current date and time (੬ pg. 9).
TAPE LENGTH* Allows you to set the tape length depending on the tape used (੬ pg. 10).
Allows you to select the image setting “FINE” or “STD” when storing in the
camcorder's memory (੬ pg. 18).
PICTURE**
SNAPSHOT
FULL
Displayed with the System Select Switch set to either “VIDEO”
(੬ pg. 20) or “D.S.C.” (੬ pg. 17).
PIN-UP
MULTI-4
MULTI-9
M.DRIVE
Displayed only with the System Select Switch set to “D.S.C.”
(੬ pg. 17).
REC TIME*
INT. TIME
This feature allows you to set the parameters for Animation and Time-Lapse
recording (੬ pg. 39).
This feature allows you to set the parameters for Self-Timer (੬ pg. 38) and Time-
Lapse recording (੬ pg. 39).
TALLY LAMP*
OFF
ON
The tally lamp remains off at all times.
The tally lamp comes on to signal the start of recording.
This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07.
JLIP ID NO.
Automatic demonstration will not take place.
DEMO MODE*
OFF
ON
Demonstrates certain functions such as Fade/Wipe, etc. When
“DEMO MODE” is set to “ON” and the Menu Screen is closed,
the demonstration starts.
NOTES:
●When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
●By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
“DEMO MODE” is set to “OFF” automatically.
●During the demonstration, all functions except zoom are
disabled.
* Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”,
this function will not be activated although the highlight bar will move on the Menu Screen like the setting
procedure.
** Activated only with the System Select Switch set to “D.S.C.”. If the System Select Switch is set to “VIDEO”,
this function will not be activated although the highlight bar will move on the Menu Screen like the setting
procedure.
Functions listed without an asterisk are available with the System Select Switch set to either “D.S.C.” or
“VIDEO”.
: Factory-preset
EN33
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.” or “VIDEO”,
and set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “EXPOSURE” MENU
3 Rotate the Select Dial to move the highlight bar to
“EXPOSURE” and press it.
ACCESS MANUAL EXPOSURE
4 Rotate the Select Dial to move the highlight bar to
Select Dial
Display
Power Switch
Menu Screen
“MANU”, then press it. “00” (exposure control level
counter) appears.
ADJUST EXPOSURE
5 To brighten the image . . .
.... rotate the Select Dial upward. The exposure
control level counter increases (maximum +06).
FOCUS
AUTO
AUTO
OFF
EXPOSURE
WIDE
S.LX
TITLE
OFF
Go to step 6.
To darken the image . . .
DATE TIME DISP.
.... rotate the Select Dial downward. The exposure
control level counter decreases (maximum –06).
4RETURN
Go to step 6.
EXPOSURE
EXPOSURE Menu
END ADJUSTMENT OF EXPOSURE
AUTO
MANU
6 Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”.
CLOSE MENU SCREEN
7 Press the Select Dial. The Menu Screen disappears
EXIT
and the exposure control level counter reappers to
indicate the exposure is adjusted.
Manual Exposure
Screen
NOTES:
00
● To return to the factory setting, select “AUTO” in step 4.
● To re-adjust exposure, repeat the procedure from step 2.
Exposure control
level counter
To brighten the image
+
06
–06
To darken the image
RECORDING Advanced Features (cont.)
34
EN
Focus detection zone
Focusing
AUTO FOCUS
The camcorder’s Full Range AF system offers continuous
shooting ability from close-up to infinity. However, correct
focus may not be obtainable in the situations listed below
(in these cases use manual focusing):
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in bright-
ness and darkness), such as a flat, one-colour wall, or a
clear, blue sky.*
•When a dark object is barely visible in the viewfinder.*
•When the scene contains minute patterns or identical
patterns that are regularly repeated.
•When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
•When shooting a scene with a high-contrast background.
* The low-contrast warning “
” appears.
NOTES:
● If the lens is smeared or blurred, accurate focusing is not
possible. Keep the lens clean, wiping with a piece of soft
cloth if it gets dirty. When condensation occurs, wipe
with a soft cloth or wait for it to dry naturally.
● When shooting a subject close to the lens, zoom out first
(੬ pg. 22). If zoomed in in the auto focus mode, the
camcorder could automatically zoom out depending on
the distance between the camcorder and the subject.
When Tele Macro (੬ pg. 32) is activated, the
camcorder will not zoom out automatically.
EN35
MANUAL FOCUS
NOTE:
You should already have made the necessary viewfinder
adjustments (੬ pg. 12). If you haven’t, do so before
continuing.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.” or “VIDEO”,
and set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “FOCUS” MENU
3 Move the highlight bar to “FOCUS” by rotating the
Select Dial, then press it.
ACCESS MANUAL FOCUS
Select Dial
Display
Power Switch
Menu Screen
4 Rotate the Select Dial to move the highlight bar to
“MANU”, then press it. “ ” and “ ” appear. The
focus is locked at this point.
ADJUST FOCUS
FOCUS
AUTO
AUTO
OFF
5 To farther subject . . .
EXPOSURE
WIDE
.... rotate the Select Dial upward. “ ” appears and
S.LX
TITLE
OFF
blinks.
DATE TIME DISP.
Go to step 6.
To nearer subject . . .
4RETURN
.... rotate the Select Dial downward. “ ” appears
and blinks.
FOCUS
FOCUS Menu
Go to step 6.
AUTO
MANU
END ADJUSTMENT OF FOCUS
6 Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”.
EXIT
CLOSE MENU SCREEN
7 Press the Select Dial. The Menu Screen disppears and
“
” reappears to indicate the focus is locked.
Manual Focus Screen
NOTES:
● To return to Auto Focus, select “AUTO” in step 4.
● To re-adjust Manual Focus, repeat the procedure from
step 2.
● Be sure to focus the lens in the maximum telephoto
position when you use the Manual Focus mode. If you
focus in on a certain subject in the wide-angle position,
sharply focused images cannot be obtained when
zoomed in because the depth-of-field is reduced at
longer focal lengths.
● When the focus level cannot be adjusted any farther or
closer, “ ” or “ ” will blink.
RECORDING Advanced Features (cont.)
36
EN
White Balance Adjustment
A term that refers to the correctness of colour reproduction
under various lighting. If the white balance is correct, all
other colours will be accurately reproduced.
System
Select Switch
The white balance is usually adjusted automatically.
However, the more advanced camcorder operator would
prefer to control this function manually and achieve a
more professional colour/tint reproduction.
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.” or “VIDEO”,
and set the Power Switch to “PRO.”.
MENU Button
ACCESS MENU SCREEN
2 Press MENU. The Menu Screen appears.
ACCESS WHITE BALANCE
3 ADJUSTMENT
Move the highlight bar to “M.W.B.” by rotating the
Select Dial, then press it. The Menu Screen disap-
pears and the M.W.B. Menu appears.
Select Dial
Display
Power Switch
Menu Screen
SET FUNCTION PARAMETERS
4 Move the highlight bar to the required white balance
4
NEXT
by rotating the Select Dial.
M.W.B.
AUTO
ON
D . ZOOM
“AUTO”
TELE MACRO OFF
DATE TIME
The white balance is adjusted automatically. This is
the factory preset position.
TAPE LENGTH T45
PICTURE
FINE
FULL
SNAPSHOT
“
: FINE”
When shooting outdoors on a sunny day.
: CLOUD”
When shooting outdoors on a cloudy day.
: HALOGEN”
4
RETURN
“
M.W.B.
M.W.B. Menu
AUTO
“
:
:
:
FINE
CLOUD
When using a video light or other similar type of
lighting.
HALOGEN
MWB
“MWB”
When shooting with the white balance already
having been set on the subject (੬ pg. 37).
EXIT
CLOSE MENU SCREEN
5 Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
To Return To Automatic White Balance . . .
.... select “AUTO” in step 4. Or set the Power Switch to
“AUTO”.
NOTE:
White balance cannot be used when Sepia (੬ pg. 27) is
activated.
EN37
Manual White Balance Operation
White paper
If the camera is operating in PRO. mode, perform a
Manual White Balance when shooting under various types
of lighting.
SELECT OPERATION SYSTEM AND
1 MODE
Follow steps 1 through 4 of the white balance
adjustment (੬ pg. 36), and select “MWB”.
SET MANUAL WHITE BALANCE
2 Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that the
white paper fills the screen.
System Select Switch
ENTER SETTING
3 Press the Select Dial until “MWB” begins blinking.
•When the setting is completed, “MWB” stops
blinking, and the Menu Screen reappears with the
highlight bar on “RETURN”.
CLOSE MENU SCREEN
4 Press the Select Dial again to close the Menu Screen.
Select Dial
Display
Power Switch
Menu Screen
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour,
changing the tint. Red paper — deeper green; blue
paper — orange; yellow paper — deeper purple.
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
NOTES:
PICTURE
FINE
FULL
● In step 2, it may be difficult to focus on the white paper
in some circumstances. In such a case, adjust focus
manually (੬ pg. 35).
SNAPSHOT
4
RETURN
● A subject can be shot under various types of lighting
conditions indoors (natural, flourescent, candlelight,
etc.). Because the colour temperature is different
depending on the light source, the tint of the subject will
differ depending on the white balance settings. Use this
function for a more natural result.
M.W.B.
M.W.B. Menu
AUTO
:
:
:
FINE
CLOUD
HALOGEN
MWB
● Once you adjust white balance during Manual White
Balance operation, the setting is retained even if the
power is turned off or the battery removed.
EXIT
RECORDING Advanced Features (cont.)
38
EN
Self-Timer
You can set the delay between pressing the Recording
Start/Stop button and the actual start of recording. If you
secure the camcorder, you (or whoever is operating the
camcorder) can enter the scene before recording starts.
System
Select Switch
NOTE:
Before performing the following steps, make sure that:
● The System Select Switch is set to “VIDEO” or “D.S.C.”
according to your needs.
● The Power Switch is set to “PRO.”.
● The camcorder is in the Record-Standby mode.
MENU Button
ACCESS MENU SCREEN
1 Press MENU.
ACCESS “INT. TIME” MENU
2 Rotate the Select Dial to move the highlight bar to
“NEXT” in Menu Screen 1 and press it to display
Menu Screen 2. Then, move the highlight bar to “INT.
TIME” and press it.
Select Dial
Display
Recording Start/Stop
Button
SET INTERVAL TIME
3 Rotate the Select Dial to move the highlight bar to the
Menu Screen 1
4
NEXT
desired time, then press it. The Menu Screen
reappears with the highlight bar on “RETURN”.
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
CLOSE MENU SCREEN
PICTURE
FINE
FULL
4 Press the Select Dial.
SNAPSHOT
4
RETURN
START DELAYED RECORDING
5 If you set the System Select Switch to “VIDEO” . . .
.... press the Recording Start/Stop Button. When the
selected time has elapsed, recording begins
automatically.
Menu Screen 2
4BACK
REC. TIME
INT. TIME
OFF
OFF
TALLY LAMP ON
JLIP ID NO
DEMO MODE OFF
07
If you set the System Select Switch to “D.S.C.”. . .
.... press SNAPSHOT. When the selected time has
elapsed, a still image is shot automatically.
4
RETURN
To Cancel Self-Timer . . .
If you set the System Select Switch to “VIDEO” . . .
.... before the recording begins, press the Recording Start/
INT. TIME
REC TIME
OFF
OFF
1 4S
1 2S
1 S
15S
Stop Button to display “
TIME” in the Menu Screen to “OFF”.
”, then set “INT.
30S
1 MIN
5 MIN
5 S
If you set the System Select Switch to “D.S.C.” . . .
.... before shooting a still image, press SNAPSHOT, then
set “INT.TIME” in the Menu Screen to “OFF”.
EXIT
EXIT
INT. TIME Menu
REC TIME Menu
INT. TIME indicator
REC TIME indicator
15S
1S
INT. TIME and REC TIME indications on the normal
screen
EN39
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time.
Animation
Time-Lapse
You can give stationary scenes or objects an illusion
of movement. This function allows you to shoot a
series of pictures, each slightly different, of the same
object for a brief period of time.
NOTE:
NOTE:
Before performing the following steps, make sure
that:
Before performing the following steps, make sure
that:
● The System Select Switch is set to “VIDEO”.
● The Power Switch is set to “PRO.”.
● The camcorder is in the Record-Standby mode.
● The System Select Switch is set to “VIDEO”.
● The Power Switch is set to “PRO.”.
● The camcorder is in the Record-Standby mode.
ACCESS MENU SCREEN
ACCESS MENU SCREEN
1 Press MENU.
1 Press MENU.
SET RECORDING TIME
SET INTERVAL BETWEEN
2 Rotate the Select Dial to move the highlight bar 2 RECORDINGS
to “NEXT” in Menu Screen 1 and press it to
display Menu Screen 2. Then, move the
Rotate the Select Dial to move the highlight bar
to “NEXT” in Menu Screen 1 and press it to
display Menu Screen 2. Then, move the
highlight bar to “INT. TIME” and press it. The
INT. TIME Menu appears. Rotate the Select Dial
to move the highlight bar to the desired time,
then press it. The Menu Screen reappears.
highlight bar to “REC TIME” and press it. The
REC TIME Menu appears. Rotate the Select Dial
to move the highlight bar to the desired time,
then press it. The Menu Screen reappears with
the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
SET RECORDING TIME
3 Rotate the Select Dial to move the highlight bar
START RECORDING
3 Press the Recording Start/Stop Button after
to “REC TIME”, then press it. The REC TIME
Menu appears. Rotate the Select Dial to move
the highlight bar to the desired time, then press
it. The Menu Screen reappears with the
highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
focusing on the subject. The recording stops
automatically after the selected period of time.
ASSEMBLE SERIES OF PICTURES
4 Repeat step 3 for the desired number of
pictures.
START TIME-LAPSE RECORDING
RELEASE ANIMATION MODE
4 Press the Recording Start/Stop Button. Recording
5 Set “REC TIME” in the Menu screen to “OFF”.
and intervals alternate automatically.
RELEASE TIME-LAPSE MODE
NOTES:
5 To release when “
” is displayed, set
● For best results, make sure the camcorder is
secured when shooting in Animation or Time-
Lapse mode.
“REC TIME” and “INT. TIME” in the Menu
Screen to “OFF”. To release when
“
” and “
press the Recording Start/Stop Button to display
”, then set “REC TIME” and “INT.
TIME” in the Menu Screen to “OFF”.
” are not displayed,
● Fade- or wipe-in/out cannot be performed during
Animation or Time-Lapse shooting.
“
● Before performing other operations following
Animation or Time-Lapse recording, make sure
the Animation or Time-Lapse mode is deactivated.
● Self-Timer, Animation and Time-Lapse are
canceled when the power is shut off or when the
cassette is ejected.
VIDEO PLAYBACK Basic Playback
40
EN
LOAD A CASSETTE
Power lamp
1 Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
Power Switch
SELECT OPERATION SYSTEM AND
2 MODE
Set the System Select Switch to “VIDEO”, and set the
Power Switch to “PLAY”.
PLAY BACK
3 Press PLAY/PAUSE (
4/6). The playback picture
appears.
STOP PLAYBACK
4 Press STOP (5).
System Select Switch
Rewind or Fast-Forward the tape
EJECT Switch
Press REW (2) to rewind, or FF (3) to fast-forward the
tape during Stop mode.
REW (2) Button
NOTES:
● The camcorder shuts off automatically after about
5 minutes in Stop mode. To turn on again, set the Power
Switch to “POWER OFF”, then to “PLAY”.
● If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
FF (3) Button
PLAY/PAUSE (4/6)
Button
STOP (5) Button
Battery pack remaining power indicator
Tape counter
Tape running
indicator
:
:
M 1 23 45
4
:Playback
3
:Fast-Forward/
Forward Search
:Rewind/Reverse
Search
2
6
:Still Playback
Viewfinder indications
VIDEO PLAYBACK Features
EN41
Tracking
This function can be used to eliminate noise bars that
appear on-screen during playback. Initial setting is Auto
Tracking. Manual Tracking is also available.
ACTIVATE MANUAL TRACKING
1 Press P.AE and EFFECT simultaneously. Then, press
P.AE or EFFECT as many times as necessary until the
noise bars disappear.
•To return to Auto Tracking, press P.AE and EFFECT
simultaneously. “AT” blinks. When Auto Tracking
finishes, the indication disappears.
Set to “VIDEO”.
NOTES:
● When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
● Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
P.AE Button
EFFECT Button
VIDEO PLAYBACK Features (cont.)
42
EN
Power Switch
FEATURE: Still Playback
PURPOSE:
To pause during playback.
OPERATION:
1) Press PLAY/PAUSE (4/6) during playback.
2) To resume normal playback, press PLAY/PAUSE
(4/6) again.
Set to “VIDEO”.
NOTE:
Noise bars appear and pictures may become
monochrome during Still Playback. This is normal.
FEATURE: Shuttle Search
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press FF (3) to search forward or press REW (2
to reverse during playback.
)
REW (2) Button
FF (3) Button
2) To resume normal playback, press PLAY/PAUSE
(4/6).
NOTES:
● During playback, press and hold REW (2) or
PLAY/PAUSE (4/6)
FF (3). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
Button
STOP (5) Button
● Noise bars appear and pictures may become
monochrome or darken during Shuttle Search. This
is normal.
COUNTER R/M Button
FEATURE: Counter Memory Function
PURPOSE:
To make it easier to locate a specific tape segment.
OPERATION:
1) Press COUNTER R/M and hold for more than
1 second. The counter resets to “0:00:00”.
2) Press COUNTER R/M for less than 1 second. “M”
appears.
3) After recording or playback, press STOP (5), then
REW (2). The tape automatically stops at or close
to 0:00:00.
4) Press PLAY/PAUSE (4/6) to start playback.
NOTES:
● The counter memory functions in the Fast-Forward
and Rewind modes.
● To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second so that “M”
disappears.
VIDEO PLAYBACK Using The Cassette Adapter
EN43
Cassette Adapter
Use this to play back a VHS-C video cassette recorded
with this camcorder on a VHS VCR. It is fully compatible
with any VHS video cassette recorder. The C-P7U adapter
is battery powered and automatically performs tape
loading and unloading.
INSERT BATTERY
1 Slide the battery cover up to remove it, and install
one “R6 (AA)” size battery as shown in the
illustration on left, then reattach the cover.
VCR
INSERT CASSETTE IN ADAPTER
2 Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
Compartment door
PLAY BACK ON CONNECTED VCR
3 Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM ADAPTER
4 Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, and push
up and remove the cassette.
Sliding latch
NOTES:
Compact video cassette
● During tape loading and unloading, do not touch the
reels for safety and tape protection.
● During special-effect playback (slow motion, still frame,
etc.), the picture may vibrate or noise bars may appear
on the screen.
Reels
● To record on a VCR using a compact cassette and the
adapter, cover the adapter’s recording safety hole with
adhesive tape.
Recording safety hole
PLAYBACK Basic Connections And Tape Dubbing
These are some basic types of connections. When making connections, refer also to your VCR and TV
instruction manuals.
44
EN
Basic Connections
Use the provided Video and Audio cables.
TV
To Video
Output
Video cable (provided)
To AUDIO and
VIDEO IN connectors
To TV or VCR
VCR
Audio cable (provided)
To Audio
Output
If your TV/VCR has the SCART connector,
use the provided cable adapter.
Connector cover*
Connection For Tape Dubbing
Use the provided Video and Audio cables.
Power Switch
PLAY/PAUSE (4/6) Button
TV
To Video
Output
Video cable (provided)
To AUDIO and
VCR (Recording deck)
VIDEO IN connectors
Audio cable (provided)
To Audio
Output
Connector cover*
If your TV/VCR has the SCART connector,
use the provided cable adapter.
* When connecting the cables, open this cover.
EN45
Basic Connections
Tape Dubbing
CONFIRM POWER-OFF STATUS
CONNECT EQUIPMENT
1 Make sure the camcorder’s power is off.
1 Following the illustration on pg. 44, connect the
camcorder and the VCR.
CONNECT CAMCORDER TO TV OR
2 VCR
PREPARE FOR DUBBING
2 Set the camcorder’s Power Switch to “PLAY”,
Pull out the connector cover and open it.
turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the
VCR.
Connect as shown in the illustration (੬ pg. 44).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
SELECT VCR MODE
3 Engage the VCR’s AUX and Record-Pause
CONNECT VCR OUTPUT TO TV
3 INPUT
modes.
Refer to your VCR’s instruction manual.
FIND EDIT-IN POINT
4 Engage the camcorder’s Play mode to find a spot
SUPPLY POWER
4 Turn on the camcorder, the VCR and the TV.
just before the edit-in point. Once it is reached,
press PLAY/PAUSE (4/6) on the camcorder.
SELECT MODE
5 Set the VCR to its AUX input mode, and set the
START EDITING
5 Press PLAY/PAUSE (
TV to its VIDEO mode.
4/6) on the camcorder and
engage the VCR’s Record mode.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (੬ pg. 7).
STOP EDITING TEMPORARILY
6 Engage the VCR’s Record-Pause mode and press
PLAY/PAUSE (4/6) on the camcorder.
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder’s Power Switch to “CAMERA” (“AUTO”
or “PRO.”), then set your TV to the appropriate
input mode.
EDIT MORE SEGMENTS
7 Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when
finished.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
NOTE:
If you wish to dub still images recorded with the
System Select Switch set to “D.S.C.”, play back the
still images (੬ pg. 46 – 50) instead of doing the
above steps 4 through 6, engage the VCR's Record
mode and record them onto a tape.
D.S.C. PLAYBACK Basic Playback
Still images shot using this camcoder are automatically
numbered, then stored in numerical order in the built-in
memory. You can view the still images stored in memory,
one at a time, much like flipping through a photo album.
46
EN
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.”, and set the
Power Switch to “PLAY”.
•The power lamp lights.
•The still image stored in memory is displayed.
•When no still image is stored in memory, the screen
becomes blue.
System Select Switch
Power lamp
PLAY BACK
2 Press FF (
3/PAGE+) or REW (2/PAGE–) to select
the still image you want to view.
•Each time REW (2/PAGE–) is pressed, the page
goes back, while each time FF (3/PAGE+) is
pressed, the page goes next.
•Even if you shoot a new picture after playing back a
still image with a low number, this will not
overwrite the existing picture because new pictures
are automatically stored after the still image most
recently stored in memory.
Power Switch
To move
the page next
Display
NOTES:
● The playback picture can also be viewed on a con-
nected TV (੬ pg. 44, 45). Camcorder operation is the
same as described in this section.
● When viewing a playback picture on a connected TV, it
may jitter slightly.
To move
the page back
D.S.C. PLAYBACK Connection
EN47
Connection to a Windows® PC
Image data stored in the camcorder’s built-in memory can
be transferred to a Windows® PC and saved using the
provided image transfer software, Picture Navigator. The
image data transferred to a Windows® PC can also be
further processed using Mr. Photo Gold, and the still image
processed on the PC can be inserted onto a tape
(੬ pg. 61).
Set to “D.S.C.”
To assure safety, make sure all units are turned off before
making any connection.
To DIGITAL
connector
CONNECT TO PERSONAL
1 COMPUTER
Connect the camcorder’s DIGITAL connector to the
COM Port (RS-232C) on a Windows® PC, using the
provided PC connection cable.
PC connection cable
(provided)
SELECT OPERATION SYSTEM AND
2 MODE
For Windows®:
To COM Port
(RS-232C)
Set the System Select Switch to “D.S.C.”, then set the
Power Switch to “PLAY”.
•A still image stored in memory appears.
•When transferring still images to a computer, be
sure that a still image is displayed on the screen.
RUN IMAGE TRANSFER SOFTWARE
®
3 Launch the provided software on your Windows PC.
Transfer the still images stored in the camcorder’s
memory to the Windows® PC. Refer to the software’s
instruction manual on the provided CD-ROM for
details.
•During transfer of the still image, the camcorder’s
screen becomes blue and “
” is dis-
Display
played. After transferring is finished, the screen
displays the same still image as in step 2.
END TRANSFERRING
4 Close the software, then switch off the camcorder.
PC MODE
NOTES:
● Before transferring still images from your personal computer to the camcorder’s built-in memory, perform the
camcorder’s Picture Mode Setting (੬ pg. 18). The still images will be transferred from the personal
computer in the selected Picture Mode.
● When transferring still images from your personal computer to the camcorder, make sure the number of
images to be transferred is smaller than the camcorder's remaining number of shots available.
● Use the AC Power Adapter/Charger as the power supply instead of the battery pack.
● The still images stored in the camcorder’s memory are not automatically removed after being transferred to
the PC. If you wish to remove those still images from the camcorder's memory, delete them (੬ pg. 52, 53).
● Windows® are trademarks of Microsoft Corporation, registered in the U.S.A. and other countries.
D.S.C. PLAYBACK Advanced Features
48
EN
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.”, and set the
Power Switch to “PLAY”.
ACCESS MENU SCREEN
2 Press MENU. The Menu Screen appears.
MENU Button
SELECT FUNCTION
3 Rotate the Select Dial to place the highlight bar on
the desired function.
•If the setting you want cannot be found in the Menu
Screen, place the highlight bar on “RETURN”, then
press the Select Dial.
Select Dial
Power Switch
Menu Screen
MAKE SETTING
4 Press the Select Dial. The setting menu of the selected
Display
function appears. The setting procedure depends on
the function you select.
MENU
INDEX
If you select “SLIDE SHOW 1” or “SLIDE SHOW 2” . . .
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
.... a slide-show will start (੬ pg. 49).
DELETE
If you select any other functions . . .
.... see respective pages (INDEX: ੬ pg. 50,
PROTECT: ੬ pg. 51, DELETE: ੬ pg. 52, 53)
and do each procedure from step 4.
4RETURN
EXIT <PROTECT>
Setting Menu
(ex. PROTECT)
01
02
03
04
05
MENU
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
4RETURN
Normal Screen
EN49
Menu Screen Explanations
Mode
Effect
INDEX
All still images stored in memory can be displayed six at a time. This mode is a
convenient way to look for the still image you want to view and to check the still
images you shot beforehand (੬ pg. 50).
SLIDE SHOW 1
After doing steps 1 through 4 on pg. 48, you can run through all the still images
stored in memory automatically in numerical order. Each still image is displayed.
This mode is like a regular slide-show. If you wish to stop the slide-show, press the
Select Dial twice.
SLIDE SHOW 2
After doing steps 1 through 4 on pg. 48 you can run through all the still images
stored in memory automatically in numerical order. The still image wipes in over
the last one from the bottom of the screen to the top. If you wish to stop the slide-
show, press the Select Dial twice.
PROTECT
DELETE
Lets you protect selected still images from accidental erasure. Select a still image for
which you want to perform “Protect” to put a padlock mark next to it. A still image
with a padlock mark cannot be deleted. When selecting a still image to protect, you
can check six still images stored in memory at a time (੬ pg. 51).
Allows you to delete some still images already stored in memory (੬ pg. 52).
CAUTION:
While “ENTER” is selected on the Delete Execute Menu and it is blinking, switching
off the camcorder or removing the power supply unit (battery pack or AC Power
Adapter/Charger) may cause the camcorder’s built-in memory to become corrupt.
Never remove the power supply unit at this stage.
SELECT
Allows you to check 6 still images stored in memory at a time, to select
the still images you want to delete.
ALL
Allows you to delete all the still images at once except protected
images.
D.S.C. PLAYBACK Advanced Features (cont.)
50
EN
Index
You can view all still images stored in memory six at a
time. Use this mode when looking for a still image you
want to view and when checking the still images you shot
beforehand.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.”, and set the
Power Switch to “PLAY”.
ACCESS MENU SCREEN
MENU Button
2 Press MENU. The Menu Screen appears.
ACCESS “INDEX” MENU
3 Rotate the Select Dial to move the highlight bar to
“INDEX” and press it. The “INDEX” Menu appears.
VIEW INDEX IMAGES
4 Rotate the Select Dial to move the frame to the
Select Dial
Power Switch
desired still image, then press it. The one you selected
is displayed on the whole screen, then the screen
enters normal playback.
Display
MENU
•On the INDEX Menu, 6 still images are displayed at
a time. When viewing the still images that follow
the 6th one, rotate the Select Dial to move the
frame from Index No. 1 to No. 6, and then rotate it
further downward. The frame is placed on the 7th
still image automatically. Images after the 7th one
can also be accessed in the same way.
Menu Screen
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
4RETURN
•If the desired still image cannot be found, place the
highlight bar on “EXIT”, then press the Select Dial
twice to exit the Menu.
EXIT
01
<INDEX>
02
INDEX Menu
03
06
NOTES:
04
● When moving the frame from the 7th still image back to
the 6th, rotate the Select Dial upward to place the
highlight bar on “EXIT”, then rotate it further upward.
The frame is moved to the 6th still image. Perform the
same procedure for the 13th image.
● On the INDEX Menu, a star mark is displayed next to a
still image you shot in the FINE mode.
Playback Screen
EN51
Protect
This mode helps prevent accidental erasure of images. Put
a padlock mark next to the desired still image, and that still
image cannot be deleted.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.”, and set the
Power Switch to “PLAY”.
ACCESS MENU SCREEN
2 Press MENU. The Menu Screen appears.
MENU Button
ACCESS “PROTECT” MENU
3 Rotate the Select Dial to move the highlight bar to
“PROTECT”, and press it. The PROTECT Menu
appears.
•If you do not want to perform “Protect” for any still
image, go to step 5.
Select Dial
Power Switch
Menu Screen
SET PROTECT
4 Rotate the Select Dial to move the frame to the
Display
desired still image, then press it. The padlock mark
appears above the selected image.
MENU
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
•On the PROTECT Menu, all still images are
displayed six at a time. To perform “Protect” for the
still images that come after the 6th one, rotate the
Select Dial to move the frame from Index No. 1 to
No. 6, then rotate it further downward. The frame is
placed automatically on the 7th still image. Images
after the 7th one can also be accessed in the same
way.
DELETE
4RETURN
EXIT <PROTECT>
PROTECT Menu
01
03
•To complete “Protect”, go to step 5.
CLOSE MENU SCREEN
04
05
06
5 Rotate the Select Dial upward to place the highlight
bar on “EXIT”, then press it twice.
To remove “Protect” . . .
EXIT <PROTECT>
.... perform steps 1 through 3, rotate the Select Dial to
move the frame to the desired still image with the
padlock mark, then press it. The padlock mark located
above the still image disappears and the image is no
longer protected. When finished removing protection,
perform step 5.
01
03
04
05
06
A padlock mark
appears.
NOTES:
● To move the frame from Index No. 7 to 6, place the
highlight bar on “EXIT” by rotating the Select Dial
upward. Rotate the Select Dial further upward. The
frame is moved to the 6th still image automatically.
Perform the same procedure for still images that follow
the 13th one.
● On the PROTECT Menu, a star mark is displayed next to
a still image you shot in the FINE mode.
D.S.C. PLAYBACK Advanced Features (cont.)
52
EN
Delete
When the memory in which still images are stored
becomes full, the number of remaining shots available
reaches “0” (blinking). In this situation it becomes
impossible to take your next shot. Delete some still images
already stored in memory to make room for new shots.
System
Select Switch
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “D.S.C.”, and set the
Power Switch to “PLAY”.
MENU Button
ACCESS MENU SCREEN
2 Press MENU. The Menu Screen appears.
ACCESS “DELETE” MENU
3 Rotate the Select Dial to move the highlight bar to
“DELETE”, and press it. The DELETE Menu appears.
SELECT DELETE MODE
Select Dial
Power Switch
4 Rotate the Select Dial to move the highlight bar to
“SELECT” or “ALL”, then press it.
To select a still image by checking the still images
stored in memory . . .
Display
MENU
Menu Screen
INDEX
.... select “SELECT”, then go to step 5.
To delete all the still images stored in memory at
once without checking them . . .
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
.... select “ALL”, then go to step 6.
To quit the Delete Mode . . .
.... rotate the Select Dial to place the highlight bar
on “EXIT”, then press it twice.
4RETURN
DELETE
DELETE Menu
SELECT ON DELETE SELECT MENU
SELECT
ALL
5 Rotate the Select Dial to move the frame to the
desired still image, then press it. “ ” appears above
the selected still image. When you have finished
selecting all the desired still images, rotate the Select
Dial upward to place the highlight bar on “NEXT”,
then press the Select Dial.
In case of “ALL”
EXIT
NEXT <DELETE>
•On the Delete Select Menu, the still images are
displayed six at a time. To delete the still images
that follow the 6th one, rotate the Select Dial to
move the frame from No. 1 to No. 6, then rotate it
further downward. The frame is moved to the 7th
still image automatically. Perform the same
In case of
“SELECT”
01
02
06
04
05
procedure for still images that follow the 7th one.
Delete Select Menu
DELETE
CANCEL
ENTER
Delete Execute Menu
Menu Screen
EN53
In case of “SELECT”
ACCESS DELETE EXECUTE MENU
6 Rotate the Select Dial to move the highlight bar to
NEXT <DELETE>
“CANCEL” or “ENTER”, then press it.
01
02
06
•“CANCEL” does not delete the selected still images
and the screen returns to the Menu Screen.
•“ENTER” deletes the selected still images. While
“ENTER” blinks, they are in the process of being
deleted from memory. After deleting is finished, the
screen returns to the Menu Screen.
04
05
CLOSE MENU SCREEN
7 Press the Select Dial again to exit the Menu Screen.
CAUTION:
If you check the remaining still images on
INDEX Menu after deleting...
While “ENTER” is selected on the Delete
Execute Menu and it is blinking, switching off
the camcorder or removing the power supply
unit (battery pack or AC Power Adapter/Charger)
may cause the camcorder’s built-in memory to
become corrupt. Never remove the power
supply unit at this stage.
EXIT
01
<INDEX>
02
03
06
NOTES:
04
05
● Before deleting some still images stored in memory,
perform “Protect” for the necessary ones (੬ pg. 51) or
save them on a PC so that you do not lose them
accidentally (੬ pg. 47).
● Even if “ALL” is selected on the DELETE Menu, it is not
possible to delete a still image with a padlock mark.
“ALL” only deletes all still images that are not protected.
After images are deleted from memory, the remaining
images are automatically moved up to fill in any gaps in
the numerical sequence. The Index No. for images
protected (with the padlock mark) may therefore change.
● When selecting the desired still image in step 5, to move
the frame from No. 7 to 6, place the highlight bar on
“EXIT” by rotating the Select Dial upward. Rotate it
further upward to move the frame to No. 6. Perform the
same procedure for still images that follow the 13th one.
● On the Delete Select Menu, a star mark is displayed next
to a still image you shot in the FINE mode.
● If the remaining number of shots is not 30 in the FINE
mode or 60 in the STANDARD mode when “ALL” is
selected on the DELETE Menu, initialize the camcorder’s
memory (੬ pg. 65).
USING THE REMOTE CONTROL UNIT
54
EN
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic operations
(Playback, Stop, Pause, Fast-Forward and Rewind) of your
VCR. The RM-V709U remote control unit makes
additional recording functions possible.
Lock hole
2
Installing The Battery
3
1
The remote control uses one lithium battery (CR2025).
PULL OUT BATTERY HOLDER
1 Pull out the battery holder while sliding the lock
1
2
hole.
0
!
@
INSERT BATTERY IN HOLDER
3
4
5
6
7
8
9
2 Insert the battery in the holder, and be sure to have
the “+” mark visible.
#
RE-INSERT HOLDER
$
%
^
&
*
3 Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(੬ pg. 2).
RM-V709U (provided)
Functions
Buttons
With the camcorder’s Power Switch set
to “CAMERA” (“AUTO” or “PRO.”).
With the camcorder’s Power Switch
set to “PLAY”.
1 PAUSE IN Connector
—
੬ pg. 57
2 Infrared beam
Transmits the beam signal.
transmitting window
3 MBR SET Button
4 INT. TIME Button
5 REC TIME Button
6 FF Button
—
੬ pg. 56
Self-Timer/Time-Lapse (੬ pg. 55)
Animation/Time-Lapse (੬ pg. 55)
Retake (forward) (੬ pg. 23)
—
—
Fast-Forward, Forward Shuttle Search
(੬ pg. 40, 42)
7 REW Button
Retake (rewind)/Quick Review (੬ pg. 23) Rewind, Reverse Shuttle Search
(੬ pg. 40, 42)
8 PAUSE Button
9 PLAY Button
0 SNAPSHOT Button
—
—
Pause (੬ pg. 42)
Playback start (੬ pg. 40)
—
Functions same as snapshot button on
the camcorder. (੬ pg. 16, 20)
! START/STOP Button
@ VISS Button
Functions the same as the Recording Start/Stop Button on the camcorder.
Ineffective
# ZOOM (T/W) Buttons
$ VCR CTL Button
% A.DUB Button
Zoom in and out (੬ pg. 22)
—
—
—
—
—
—
੬ pg. 56
Audio dubbing (੬ pg. 62)
Stop (੬ pg. 40)
^ STOP Button
& INSERT Button
* R.A.EDIT Buttons
Insert Editing (੬ pg. 60, 61)
੬ pg. 58
EN55
FEATURE: Self-Timer, Animation and
Time-Lapse
Transmitted beam
effective area
PURPOSE:
The remote control lets you set/release Interval Timer
and Rec Time functions without using the Menu Screen.
OPERATION:
Self-Timer
1) Set
Remote sensor
Instead of performing steps 1 through 4 on pg. 38
(“Self-Timer”), press INT. TIME on the remote
control. Each time INT. TIME is pressed, the Interval
Timer indicator appears, changing in the following
order: 15S, 30S, 1MIN, 5MIN and No indication
(off).
When using the remote control, be sure to point it at
the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
2) Release
Instead of setting “INT. TIME” to “OFF” in the Menu,
press INT. TIME on the remote control until the
Interval Timer indicator disappears.
Animation
Interval timer indicator
1) Set
Instead of performing steps 1 and 2 on pg. 39
(“Animation”), press REC TIME on the remote
control. Each time REC TIME is pressed, the Rec
Time indicator appears, changing in the following
order: 1/4S, 1/2S, 1S, 5S and No indication (off).
2) Release
1MIN
2S
1
Instead of using the Menu in step 5 on pg. 39, press
REC TIME on the remote control until the Rec Time
indicator disappears.
Rec time indicator
Time-Lapse
1) Set
Instead of performing steps 1 through 3 on pg. 39
(“Time-Lapse”), press INT. TIME and REC TIME on
the remote control. Each time INT. TIME is pressed,
the Interval Timer indicator appears, changing in the
following order: 15S, 30S, 1MIN, 5MIN and No
indication (off). Each time REC TIME is pressed, the
Rec Time indicator appears, changing in the
following order: 1/4S, 1/2S, 1S, 5S and No indication
(off).
Remote sensor
2) Release
Instead of using the Menu in step 5 on pg. 39, press
INT. TIME and REC TIME on the remote control until
the indicators disappear.
NOTE:
Also refer to pgs. 38 and 39.
START/STOP
INT. TIME
REC TIME
RM-V709U
(provided)
USING THE REMOTE CONTROL UNIT (cont.)
56
EN
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
VCR (Recording deck)
automatic editing, in any order you like. R.A.Edit is
more easily performed when the RM-V709U MBR
(Multi-Brand Remote, ੬ pg. 54) is set to operate
with your brand of VCR (see VCR CODE LIST), but
can also be performed by operating the VCR
manually.
Before operation, make sure the lithium battery is
installed in the remote control RM-V709U
(੬ pg. 54).
SET REMOTE/VCR CODE
SET REMOTE TO OPERATE VCR
MBR SET
VCR CTL
1
4
7
2
5
8
3
6
9
1 Turn off the power to the VCR and point the
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST on the left,
press and hold MBR SET, and press button (A)
and then (B).
0
RM-V709U
(provided)
•The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
OPERATE VCR
2 Make sure the VCR’s power is on. Then, while
VCR CODE LIST
holding VCR CTL, press the button on the
remote for the desired function. The functions
the remote can control are PLAY, STOP, PAUSE,
FF, REW and VCR REC STBY (you do not need
to press VCR CTL for this one).
VCR BRAND
NAME
BUTTONS
(A) (B)
VCR BRAND
NAME
BUTTONS
(A) (B)
AKAI
6
6
7
2ꢀ
4ꢀ
7
PHILIPS
1
9
1
9
9
9
1
3
7
9ꢀ
5ꢀ
1ꢀ
4ꢀ
1ꢀ
6ꢀ
2ꢀ
3ꢀ
2ꢀ
You are now ready to try Random Assemble
Editing.
BLAUPUNKT
FERGUSON
1
3
9
9
3
7ꢀ
8ꢀ
2
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
GRUNDIG
HITACHI
1
3
4ꢀ
4
ꢀ
ꢀ
SANYO
3
3
6ꢀ
5
NOTES:
6
6
6ꢀ
3
SELECO,
REX
9
9
1ꢀ
6
● If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR do not come on automati-
cally. In this case, turn the power on manually and
try step 2.
JVC
A
B
C
9
9
9
1ꢀ
6ꢀ
3
SHARP
1
1
5ꢀ
`
6
6
3
3
9
9
9
3
5ꢀ
`ꢀ
9ꢀ
1ꢀ
1ꢀ
6ꢀ
7ꢀ
2
SONY
MITSUBISHI
6
6
7ꢀ
8
● If the remote control is not able to control the VCR,
use the controls on the VCR.
● When the remote control’s battery runs out, the
VCR brand you have set will be erased.
In that case, replace the old battery with a new one
and reset the VCR brand.
NEC
3
3
7ꢀ
8
ꢀ
THOMSON,
TELEFUNKEN,
SABA,
PANASONIC
1
1
1
9
1
3ꢀ
7ꢀ
1ꢀ
4ꢀ
8
NORDMENDE
TOSHIBA
6
6
9ꢀ
1
EN57
MAKE CONNECTIONS
CONNECT TO . . .
1
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Open
the cover.
Open the cover.
Connect the editing cable to the R.A.EDIT
connector.
To J terminal
(JLIP)
To Audio
Output
To Video
Output
VCR OTHER THAN TYPE
OR
Connect the editing cable to the RM-V709U’s
PAUSE-IN connector.
PREPARE CAMCORDER
2 Insert a recorded tape. Set the System Select Switch to
Audio cable
(provided)
Video cable
(provided)
“VIDEO”, and set the Power Switch to “PLAY”.
PREPARE VCR
Editing cable
(provided, ø3.5
mini-plug cable)
3 Turn the power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
To AUDIO
and VIDEO IN
connectors
If your TV/VCR has the
SCART connector, use the
provided cable adapter.
To Remote
PAUSE
VCR
To PAUSE-IN
TV
RM-V709U
(provided)
CONTINUED ON NEXT PAGE
USING THE REMOTE CONTROL UNIT (cont.)
58
EN
SELECT SCENES
Remote sensor
START SOURCE PLAYBACK
4 Press PLAY, then press ON/OFF on the remote
control. Make sure to point the remote control at the
camcorder’s remote sensor.
•The R.A. Edit counter display appears.
REGISTER BEGINNING OF SCENE
5 Press REW or FF to locate the beginning of the scene
you want, then press IN/OUT to register that point.
•The data appears under “IN” on the display.
REGISTER END OF SCENE
6 Press REW or FF to locate the end of the scene and
press IN/OUT to register it.
Power Switch
•The data appears under “OUT” on the display.
•The total time of the registered scene(s) is displayed
FF
PAUSE
CANCEL
ON/OFF
REW
PLAY
IN/OUT
at the bottom of the screen.
REGISTER ADDITIONAL SCENES
7 Repeat steps 5 and 6 for each additional scene
(as many as 8).
RM-V709U
(provided)
MAKE CORRECTIONS (IF NECESSARY)
8 Press CANCEL during steps 5 and 6 to erase the most
recently registered point.
IN
OUT
:
:
:
:
1
2
3
4
5
6
7
8
0 00 25
-- -- --
NOTES:
● There must be at least one second between an in-point
and its corresponding out-point.
● To ensure correct operation, there should be at least
15 seconds between an out-point and the next in-point.
● Blank portions of a tape cannot be registered as in-points
or out-points.
:
:
COUNTER
TOTAL
0 00 25
:
:
0 00 00
● If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
does not take place.
● Pressing ON/OFF clears all in- and out-points from
memory.
● Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
● Turning off the camcorder’s power erases all registered
in- and out-points.
IN
OUT
:
:
:
:
1
2
3
4
5
6
7
8
0 00 25
0 01 05
:
:
:
:
0 03 18
0 03 31
:
:
:
:
:
0 02 33
0 02 53
:
:
:
0 04 11
-- -- --
:
:
:
COUNTER
TOTAL
0 04 11
:
0 01 13
EN59
AUTOMATIC EDITING TO VCR
Original tape (camcorder)
1
IN
3
2
IN
PREPARE SOURCE TAPE
OUT
IN OUT
OUT
9 Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE.
ENGAGE VCR’S RECORD-PAUSE MODE
10 Point the remote control towards the VCR’s infrared
sensor and press VCR REC STBY, or manually engage
Edited tape (VCR)
the VCR’s Record-Pause mode.
STOP (5) Button
BEGIN AUTOMATIC EDITING
REW (2) Button
11
Press MENU/DISPLAY on the camcorder, and the
previously selected scenes are copied to the VCR in
the specified order.
PAUSE (6) Button
While editing, the R.A. Edit counter of the scene
which is being copied is shown with a blinking
highlight.
Remote Sensor
•Pressing START/STOP on the remote control does
not start editing.
MENU/DISPLAY
Button
END AUTOMATIC EDITING
12 When all selected scenes have been copied, the
camcorder and VCR enter the Still or Pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press ON/OFF.
Power
Switch
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
Recording
Start/Stop Button
NOTES:
● If you performed step 1
on page 57 (“MAKE CONNEC-
TIONS”), keep the remote control pointed at the VCR during
editing.
ON/OFF
VCR REC STBY
● The on-screen display only appears while the camcorder
searches for each scene.
RM-V709U (provided)
● There may be noise at in- or out-points on the edited tape
with certain VCRs.
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
Using the RM-V709U, it is also possible to perform deck-to-deck
Random Assemble Editing. The playback deck must be an R.A. Edit-
capable JVC VCR. The recording deck can be...
Ⅲ a VCR other than JVC, or
AV OUT
Player (JVC VCR)
Ⅲ a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT
connector
To R.A. EDIT Editing cable
(provided)
How to use:
AV IN
— Connect the playback deck and RM-V709U as shown on the left.
— Set the RM-709U to correspond to the brand of the recording
deck. (੬ pg. 56)
Recording deck
— For Random Assemble Editing procedure, please refer to the
instruction manual of the JVC VCR you are using as the playback
deck.
To PAUSE IN
Notes:
Ⅲ RM-V709U cannot be used to control the playback deck.
Ⅲ RM-V709U is capable of controlling basic operations of the
recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with some
brands and models). Other buttons cannot be used.
RM-V709U
(provided)
Ⅲ To put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
USING THE REMOTE CONTROL UNIT (cont.)
60
EN
Insert Editing (VIDEO)
Power Switch
You can record a new scene onto a previously recorded
tape, replacing a section of the original recording with
minimal picture distortion at the in- and out-points. The
original audio remains unchanged.
System Select Switch
NOTE:
Use the RM-V709U remote control unit to perform this
procedure.
SELECT OPERATION SYSTEM AND
1 MODE
Set the System Select Switch to “VIDEO”, and set the
Power Switch to “PLAY”.
REW (2) Button
FIND EDIT-OUT POINT
2 Play back the tape, locate the point and press PAUSE
FF (3) Button
PLAY/PAUSE (4/6) Button
on the camcorder or the remote control.
RESET COUNTER
STOP (5) Button
3 Press and hold COUNTER R/M for more than
1 second to reset the tape counter, then press again
for less than 1 second so that “M” appears.
COUNTER R/M Button
FIND EDIT-IN POINT
Display
4 Press REW to go a little beyond the beginning of the
Insert editing
indicator
scene you want to replace, press PLAY to view the
recorded tape, and press PAUSE exactly at the
point where the new scene should start.
:
:
M 0 12 34
Tape counter
ENGAGE INSERT EDITING MODE
5 Press and hold INSERT, and without releasing
INSERT, press and release PAUSE. The Insert Editing
mode is engaged. When the scene the camcorder is
aimed at appears on the screen, go to the next step.
Remote sensor
BEGIN INSERT EDITING
6 Press START/STOP. When the counter reaches
“0:00:00”, editing stops automatically and the
camcorder enters the Insert-Pause mode.
END INSERT EDITING
7 Press STOP.
NOTES:
● During Insert Editing, the original audio will be heard
from the speaker.
● After step 5, Retake (੬ pg. 23) can be performed.
● The tape may stop slightly before or after the designated
end point, and noise bars may appear. Neither indicates
a defect in the unit.
● Only the video signal is recorded in the Insert Editing
mode.
START/STOP
PAUSE
REW
STOP
INSERT
PLAY
RM-V709U
(provided)
EN61
Insert Editing (Insert A Still Image From
Power Switch
The Built-in Memory Onto A Tape)
You can insert a still image stored in the camcorder's built-
in memory into a previously recorded tape, replacing a
section of the original recording with minimal picture
distortion at the in- and out-points. The original audio
remains unchanged.
System Select Switch
Perform steps 1 through 5 in Insert Editing (VIDEO)
(੬ pg. 60) before the following procedure.
NOTE:
Use the RM-V709U remote control unit to perform this
procedure.
SELECT STILL IMAGE
REW (2/PAGE–) Button
1 First set the System Select Switch to “D.S.C.”. Press
FF (3/PAGE+) Button
PLAY/PAUSE (4/6) Button
REW (2/PAGE–) or FF (3/PAGE+) to select the
still image you wish to insert.
BEGIN INSERT EDITING
STOP (5) Button
2 Press START/STOP. When the counter reaches
“0:00:00”, editing stops automatically and the
camcorder enters the Insert-Pause mode.
COUNTER R/M Button
To insert still images in sequential order onto the
tape . . .
Display
... press REW (2/PAGE–) or FF (3/PAGE+) to
move the page forward.
Insert editing
indicator
To insert still images at random onto the tape . . .
... first record the still image you selected in step 1
onto the tape, then press START/STOP to engage
the Insert-Pause mode. To select another still
:
:
M 0 12 34
Tape counter
image, press REW (2/PAGE–) or FF (3
/
PAGE+) again, then press START/STOP. Insert-
Editing begins.
Remote sensor
END INSERT EDITING
3 PressSTOP.
NOTES:
● The tape may stop slightly before or after the designated
end point, and noise bars may appear. Neither indicates
a defect in the unit.
● Only video signal is recorded in the Insert Editing mode.
START/STOP
PAUSE
REW
STOP
PLAY
INSERT
RM-V709U
(provided)
USING THE REMOTE CONTROL UNIT (cont.)
62
EN
Display
Audio Dubbing
e
4
Audio dubbing
indicator
You can record a new soundtrack on a prerecorded tape
:
:
M 0 05 20
(normal audio only).
Perform steps 1, 2 and 3 of the Insert Editing (VIDEO)
procedure (੬ pg. 60) before continuing.
•The sound comes from the built-in microphone.
FIND EDIT-IN POINT
1 Press REW to go a little beyond the beginning of the
scene onto which you want to dub the new audio,
press PLAY to view the recorded tape, then press
PAUSE at exactly the point where dubbing should
start.
Remote sensor
ENGAGE AUDIO DUB-STANDBY MODE
2 Press and hold A. DUB, and without releasing
A. DUB, press and release PAUSE.
BEGIN AUDIO DUBBING
3 Press PLAY. When the counter reaches “0:00:00”,
Audio Dubbing stops automatically and the
camcorder enters the Audio Dub-Standby mode.
Microphone
END AUDIO DUBBING
4 PressSTOP.
Set to “VIDEO”
PAUSE
NOTES:
● Do not press FF or REW during Audio Dub-Standby, or
the edit points will not be accurate.
A. DUB
STOP
● If the microphone is too close to the TV, or if the TV’s
volume is too high, whistling or howling may occur.
REW
PLAY
NOTES (for Insert Editing and
Audio Dubbing):
RM-V709U
(provided)
● Insert Editing and Audio Dubbing may not work
correctly if the tape contains blank segments, or if the
recording speed was changed during the original
recording.
● To edit/dub onto a tape, make sure the Erase Protection
tab is in the position that allows recording. If not, slide
the tab. Some cassettes have removable tabs. If the tab
has been removed, cover the hole with adhesive tape.
● Do not press STOP during Insert Editing or Audio
Dubbing, or the edit points will not be accurate.
● During Insert Editing and Audio Dubbing, when Insert-
Pause or Audio Dub-Standby is engaged, the counter
may go slightly past “0:00:00”. Recording, however,
stops at exactly 0:00:00.
TROUBLESHOOTING
If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.
EN63
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.)
might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack,
AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from
the beginning.
SYMPTOM
POSSIBLE CAUSE(S)
POWER
No power is supplied.
● The battery pack has not been attached correctly
(੬ pg. 6).
● The battery pack is not charged (੬ pg. 6).
● The power supply has not been correctly connected
(੬ pg. 7).
The power suddenly goes off and
does not come back on by itself.
● The battery pack has completely discharged.
● Remove the cassette and disconnect the power source, then
after a few minutes, try turning the power back on. If it still
doesn’t come on, consult your nearest JVC dealer.
OTHER
Some functions are not available.
● The Power Switch is set to “AUTO”.
● Certain combinations of modes or effects are not possible to
use.
During recording, the indications do
not appear.
● Press DISPLAY for longer than 1 second to make the
indications appear (੬ pg. 15).
Vertical white lines appear when
shooting a very bright object.
● This sometimes occurs when the contrast between the back-
ground and the object is great. It is not a defect of the
camcorder.
Bright, crystal-shaped spots appear in
the viewfinder.
● Sunlight is directly entering the lens. This is not a defect of
the camcorder.
Coloured bright spots appear all over
the viewfinder.
● The viewfinder is made with high-precision technology.
However, black spots or bright spots of light (red, green or
blue) may appear constantly in the viewfinder. These spots
are not recorded on the tape. This is not due to any defect
of the unit. (Effective dots: more than 99.99 %.)
The viewfinder and the lens have
become dirty (ex. fingerprints).
● Wipe them gently with soft cloth.
An error number (i.e. E03) appears.
● Turn the camcorder’s power off, then disconnect the power
source. After a few minutes, try turning the power on again.
If the error number still appears, consult your nearest JVC
dealer.
The image is out of focus.
● The dioptre needs to be adjusted (੬ pg. 12).
● The scene being shot is adversely affecting the operation of
Auto Focus (੬ pg. 34).
Even though the Lens Cover is open,
the Lens Cover Warning indicator
blinks.
● The Lens Cover Warning indicator may blink when the
camcorder is used in dark areas, regardless of the position
of the Lens Cover.
TROUBLESHOOTING (cont.)
When the System Select Switch is set to “VIDEO”:
64
EN
SYMPTOM
POSSIBLE CAUSE(S)
RECORDING
Recording cannot be performed.
● Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes have
removable tabs. If the tab has been removed, cover the
hole with adhesive tape (੬ pg. 11).
● If the System Select Switch is set to “D.S.C.”, it is not
possible to record onto the tape. Change the Switch
position to “VIDEO” (੬ pg. 14).
Recording does not start.
● The camcorder Power Switch has not been set to
“CAMERA” (“AUTO“ or “PRO.“) (੬ pg. 14).
PLAYBACK
The tape is running, but there is no
playback picture.
● The TV has not been set to its VIDEO mode or channel.
● If A/V connection is used, the TV’s VIDEO/TV Switch has
not been set to VIDEO.
Playback cannot be performed.
● If the System Select Switch is set to “D.S.C.”, it is not
possible to play back a tape. Change the Switch position to
“VIDEO” (੬ pg. 40).
Playback picture is blurred or
interrupted.
● The video heads are dirty or worn out. Consult your nearest
JVC dealer for head cleaning or replacement.
The counter indication is blurred
during Still playback.
● This is normal.
TAPE TRANSPORT
The tape stops during fast-forward or
rewind.
● The Counter Memory Function has been activated
(੬ pg. 42).
Rewinding or fast-forwarding cannot
be performed.
● The tape is already fully wound on one reel or the other.
OTHER
The date and time displays
disappear.
● If you remove the power source from the camcorder while
the power is on, all settings and selections are erased. Make
sure to turn the camcorder’s power off before disconnecting
the power source.
The wrong date and time are
displayed/recorded.
● If you have not performed Date/Time Setting (੬ pg. 9),
the date and time are not displayed/recorded correctly. Be
sure that Date/Time setting is carried out.
The tape will not eject.
● The battery pack is running low.
EN65
When the System Select Switch is set to “D.S.C.”:
SYMPTOM
POSSIBLE CAUSE(S)
SHOOTING
Although the SNAPSHOT Button is
pressed, a still image is not stored in
the built-in memory.
● When the number of remaining shots available reaches “0”
(blinking), it becomes impossible to take your next shot.
Perform “DELETE” function to remove some still images
already stored in memory (੬ pg. 52).
Self-Timer Shooting is not available.
● Pressing the Recording Start/Stop Button does not start
recording in the Self-Timer Shooting procedure. Press the
SNAPSHOT Button (੬ pg. 38).
It is not possible to shoot in
sucession.
● A still image is in the process of being stored in memory for
approx. 2 seconds after the SNAPSHOT Button is pressed.
During that time, it is impossible to take another shot. When
the still image disappears and the scene you are currently
aimed at appears on the screen, take another shot (੬ pg. 16).
PLAYBACK
Although “ALL” is selected in the
DELETE Menu Screen, all still images
cannot be deleted.
● The “Protect” function is in effect for some still images. If
they are not necessary, cancel the “Protect” function, then
try deleting all still images again (੬ pg. 51).
OTHER
Date/Time Insert is not performed
while shooting a still image.
● It is not possible to display the date/time on a still image.
● It is not possible to display the Instant Titles on a still image.
● It is not possible to set “REC TIME” in the Menu Screen.
Instant Titles are not displayed while
shooting a still image.
Some settings cannot be changed in
the Menu Screen.
Since the camcorder is a microcomputer-controlled device, external noise and interference (from a TV, a
radio, etc.) might prevent it from functioning properly. For example, when a still image you shot is stored
in the camcorder's built-in memory, the above may cause the following: Although the remaining number
of shots indicator shows that shooting is possible, a still image cannot be stored in memory after shooting.
In such a case, initialize the memory by following steps 1 through 3 below. Please note that initialization
deletes all the still images (including ones for which you performed the “Protect” function) stored in the
camcorder’s memory. If you wish to keep any of the still images that are stored in memory, before
initialization first transfer them to a PC and save them. If image data is corrupt, transfer is impossible.
1. Set the System Select Switch to “D.S.C.”, then set the Power Switch to
“PLAY”.
FORMAT
CANCEL
ENTER
2. Press COUNTER R/M for more than 2 seconds. The FORMAT Menu
Screen appears.
3. Rotate the Select Dial to move the highlight bar to “CANCEL” or
“ENTER”, then press it.
•“CANCEL” does not initialize the memory.
•“ENTER” initializes the memory. During initialization, “ENTER” blinks.
When initialization is complete, the screen becomes blue back.
FORMAT Menu
CAUTION:
While “ENTER” is selected and it is blinking, switching off the camcorder or removing the power supply
unit (battery pack or AC Power Adapter/Charger) may cause the camcorder’s built-in memory to become
corrupt. Never remove the power supply unit at this stage.
INDEX Controls, Connectors And Indicators
66
EN
o
u 2
1
p
w
W
E
R
Q
e r
3 4 5 6
T
7
8
9
0
!
#
@
$
&
%
^
Y
t y * ( i )
q
U
I
EN67
Controls
Connectors
1 Diopter Adjustment Control ................. ੬ pg. 12
w DC IN Jack ............................................ ੬pg. 7
2 Lens Cover Open/Close Ring
The connectors e to y are located beneath the
cover.
[LENS COVER] .................................... ੬ pg. 14
3 Video Light Switch
e Video Output Connector ...................... ੬ pg. 44
r Audio Output Connector ..................... ੬ pg. 44
[LIGHT OFF/AUTO/ON] ...................... ੬ pg. 24
4 Snapshot Button [SNAPSHOT] ....... ੬ pg. 16, 20
5 Power Zoom Lever [T/W]..................... ੬ pg. 22
t J Terminal [JLIP (Joint Level Interface Protocol)
Connector]
•Connect the editing cable when performing
Random Assemble Editing (੬ 56 – 59).
•It is used to connect the camcorder to a device
such as a personal computer.
For further details consult your nearest JVC
dealer.
•JLIP-controlled editing from camcorder to VCR
is not possible if the VCR is not equipped with a
J terminal.
6 Picture Stabilizer Button
[P.STABILIZER] ..................................... ੬ pg. 23
7 Programme AE Button [P.AE] ................ ੬ pg. 26
8 Fade/Wipe Button [EFFECT] ................. ੬ pg. 25
9 System Select Switch
[D.S.C./VIDEO] ................ ੬ pg. 14, 16, 40, 46
0 •Rewind Button
[
2, REW/PAGE–] ...................... ੬ pg. 40, 46
y Digital Connector ............................... ੬ pg. 47
•Retake Rewind Button [RETAKE R]..... ੬ pg. 23
•Quick Review Button [ R] ............. ੬pg. 23
Indicators
! •Fast-Forward Button
[
3, FF/PAGE+].......................... ੬pg. 40, 46
u Tally Lamp ........................................... ੬ pg. 14
i Power Lamp ........................................ ੬ pg. 14
•Retake Forward Button [RETAKE F] .... ੬ pg. 23
@ Stop Button [5, STOP] ......................... ੬pg. 40
# Play/Pause Button
Other Parts
[4/6, PLAY/PAUSE]............................. ੬ pg. 40
o Battery Pack Mount ............................... ੬pg. 6
p Viewfinder ........................................... ੬ pg. 12
Q Grip Strap ............................................ ੬ pg. 12
$ Select Dial [+, –, PUSH] .................. ੬ pg. 9, 30
% MENU/DISPLAY Button ................. ੬ pg. 15, 30
^ Counter Reset/Memory Button
W •Camera sensor
[COUNTER R/M] ................................. ੬ pg. 42
Be careful not to cover this area; a sensor
necessary for shooting is built-in here.
•Remote Sensor .................................. ੬ pg. 55
& EJECT Switch ....................................... ੬ pg. 11
* Recording Start/Stop Button.................. ੬ pg. 14
( Power Switch .................... ੬ pg. 14, 16, 40, 46
E Video Light .......................................... ੬ pg. 24
R Microphone......................................... ੬ pg. 62
T Eyepiece .............................................. ੬ pg. 72
Y Shoulder Strap Eyelets .......................... ੬ pg. 13
U Clock Battery Slot .................................. ੬pg. 8
I Tripod Mounting Socket ....................... ੬ pg. 13
) Battery Release Switch
[BATTERY RELEASE] .............................. ੬ pg. 6
q PUSH Button ....................................... ੬ pg. 11
INDEX Indications
68
EN
1
2
3
4
5
30MIN
T45
6
#
REC
FINE 12
$
^
*
FADER
7
%
&
2
01
8
0
LENS COVER
PAUSE
9
1X
a
15S
5S
TAPE END
(
!
MERRY CHRISTMAS
b
@
:
:
25. 12. 99
22 50 00
EN69
1 Cassette Warning/
# Battery Pack Remaining Power Indicator
Tape Remaining Time .......................... ੬ pg. 15
Changes as follows according to the battery
pack’s remaining power level:
When no cassette is inserted: the cassette (
warning blinks.
When the Erase Protection tab is not in the position
that allows recording: the cassette ( ) warning
lights. Otherwise, the tape remaining time is
displayed and the tape remaining time warning
blinks when the tape is about to reach its end.
When the Power Switch is set to “PLAY” and a
)
“
”. When the power is
almost gone, the indicator “ ” blinks (battery
power warning), then the unit shuts off. Replace
the battery pack with a fully charged one.
Note: The symbol containing 3 darkened squares —
— does not necessarily mean that the battery
pack is fully charged.
tape is loaded: the cassette (
regardless of the Erase Protection tab’s position.
) mark is displayed
$ Focus Indicator .................................... ੬ pg. 34
% Exposure Control Level Counter ........... ੬ pg. 33
^ White Balance Mode Indicator ............ ੬ pg. 36
2, 7 Programme AE Indicator ................. ੬ pg. 26
Displayed at 2 for approx. 2 seconds when
Programme AE with special effects is switched
from one mode to another by pressing P.AE., then
only the indicator remains at 7.
& •Record–Standby Mode Indicator ....... ੬ pg. 14
•Lens Cover Warning:
LENS COVER .................................... ੬ pg. 15
* Clock Battery Warning
2, 8 Fade/Wipe-Standby Indicator .......... ੬ pg. 25
Displayed at 2 for approx. 2 seconds when the
Fade/Wipe is switched from one effect to another
by pressing EFFECT, then only the indicator
remains at 8.
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the clock
(lithium) battery is either not installed or has
discharged. Install or replace the old battery with
a new one (੬ pg. 8).
3 •Picture Mode Display ................. ੬ pg. 17, 18
( •Tape End Display: TAPE END ............ ੬ pg. 15
Appears when the end of the tape is reached
during playback, recording or fast-forward.
•Condensation Warning:
•Remaining Number Of Shots
Indicator ..................................... ੬pg. 17, 18
4 Tape Length Indicator .......................... ੬ pg. 10
5 Zoom Indicator Bar ............................. ੬ pg. 22
When this indication appears, all functions
except tape eject and power on/off are disabled.
Turn the unit off (without removing the power
source) for a few hours, and when you turn it on
again the indication should disappear.
Zoom Level Indicator
Approximate Zoom Ratio
6 Recording Indicator ............................. ੬ pg. 14
9 Picture Stabilizer Indicator ................... ੬ pg. 23
•Head Clog Warning:
0 Interval Timer/Recording Time
Appears if dirty heads are detected during
recording. In such a case, use the optional
Cleaning Cassette. If, after using it, the problems
still exist, consult your nearest JVC dealer.
Indicator ....................................... ੬pg. 38, 55
! Instant Title Display ............................. ੬ pg. 29
@ Date/Time Display ............................... ੬ pg. 28
CAUTIONS
70
EN
DANGER:
Battery Packs
The battery packs are nickel-cadmium
or nickel metal-hydride batteries.
Before using the supplied battery pack
or an optional battery pack, be sure to
read the following cautions:
Video Light
•The video light becomes extremely hot. Do not
touch it either while in operation or soon after
turning it off, otherwise serious injury may result.
•Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
1.To avoid hazard . . .
... do not burn.
Terminals
... do not short-circuit the terminals.
... do not modify or disassemble.
... use only specified chargers.
•When operating, keep a distance of about 30 cm
between the video light and people or object.
•Do not use near flammable or explosive materials.
•It is recommended that you consult your nearest
JVC dealer for replacing the video light.
2. To prevent damage and prolong service life . . .
... do not subject to unnecessary shock.
... avoid repeated charging without fully discharg-
ing.
... charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type
battery—cooler temperatures impede chemical
reaction, while warmer temperatures can
prevent complete charging.
... store in a cool, dry place. Extended exposure to
high temperatures will increase natural
discharge and shorten service life.
... avoid prolonged uncharged storage.
... remove from charger or powered unit when
not in use, as some machines use current even
when switched off.
General Battery Precautions
•When the C-P6U or C-P7U (cassette adapter) is not
functioning even when correctly operated, the
battery is exhausted. Replace it with a fresh one.
•Use only the following battery:
C-P6U or C-P7U..................... R6 (AA) size
Please make note of the following rules for battery
use. When misused, battery can leak or explode.
1. Refer to the C-P6U/C-P7U instructions when
replacing the battery.
2. Do not expose the battery to excessive heat as it
can leak or explode.
3. Do not dispose of battery in a fire.
4. Remove battery from the unit if it is to be stored for
an extended period to avoid battery leakage which
can cause malfunctions.
NOTES:
●It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging .............................. 10°C to 35°C
Operation ............................ 0°C to 40°C
Storage ................................ –10°C to 30°C
●Recharging time is based on room temperature of
20°C.
●The lower the temperature, the longer recharging
takes.
EN71
Cassettes
Main Unit
To properly use and store your cassettes, be sure to
read the following cautions:
1.For safety, DO NOT . . .
... open the camcorder’s chassis.
... disassemble or modify the unit.
1.During use . . .
... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not in
use.
... allow inflammables, water or metallic objects
to enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
... make sure the cassette bears the VHS-C mark.
... be aware that recording onto prerecorded tapes
automatically erases the previously recorded
video and audio signals.
... make sure the cassette is positioned properly
when inserting.
... do not load and unload the cassette
repeatedly without allowing the tape to run at
all. This slackens the tape and can result in
damage.
2.Avoid using the unit . . .
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as near
a cooking stove.
... in places subject to excessive shock or
vibration.
... do not open the front tape cover. This exposes
the tape to fingerprints and dust.
2.Store cassettes . . .
... away from heaters or other heat sources.
... out of direct sunlight.
... near a television set.
... where they won’t be subject to unnecessary
shock or vibration.
... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
... vertically, in their original cases.
... near appliances generating strong magnetic or
electric fields (speakers, broadcasting antennas,
etc.).
... in places subject to extremely high (over 40°C )
or extremely low (under 0°C) temperatures.
3.DO NOT leave the unit . . .
... in places of over 50°C.
... in places where humidity is extremely low.
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
4.To protect the unit, DO NOT . . .
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration during
transportation.
... keep the lens directed at extremely bright
objects for long periods.
... direct the eyepiece of the viewfinder at the sun.
... carry it by holding the viewfinder. Be sure to
hold the main unit with both hands or use the
grip.
... swing it excessively when using the shoulder
strap.
CAUTIONS (cont.)
72
EN
For Your Maintenance
How to handle a CD-ROM
1.After Use
•Take care not to soil or scratch the mirror surface
(opposite to the printed surface). Do not write
anything or put a sticker on either the front or back
surface. If the CD-ROM gets dirty, gently wipe it
with a soft cloth outward from the centre hole using
a circular motion.
•Do not use conventional disc cleaners or cleaning
spray.
•Do not bend the CD-ROM or touch its mirror
surface.
1 Set the Power Switch to “POWER OFF” to turn off
the camcorder.
2 Close and lock the cassette holder by pressing
PUSH.
3 Slide BATTERY RELEASE to remove the battery
pack.
4 Turn the LENS COVER Open/Close Ring to close
the lens cover.
•Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
2.Cleaning The Camcorder
1 CLEAN EXTERIOR
Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well
to wipe off heavy dirt, then wipe again with a
dry cloth.
About moisture condensation . . .
2 CLEAN LENS
● You may have observed that pouring a cold
liquid into a glass will cause drops of water to
form on the glass’ outer surface. This same
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool place
to a warm place, after heating a cold room,
under extremely humid conditions or in a
place directly subjected to the cool air from an
air conditioner.
Blow it with a blower brush, then wipe it gently
with lens cleaning paper.
3 REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull it
out.
4 CLEAN VIEWFINDER
Remove dust using a blower brush.
5 RE-ATTACH EYEPIECE
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
Re-attach the eyepiece and turn it clockwise.
NOTES:
● Avoid using strong cleaning agents such as benzine
or alcohol.
Serious malfunctioning
● Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth,
refer to the cautions that came with it.
● When removing the eyepiece, be sure to hold the
viewfinder securely.
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
SPECIFICATIONS
EN73
Camcorder
General
Operating
temperature
Operating humidity : 35% to 80%
Storage temperature : –20°C to 50°C
Weight
Format
: VHS PAL standard
: DC 6.0 V
: 0°C to 40°C
Power source
Power consumption
light on
light off
Signal system
Video recording system
Luminance
Colour
: 8.7 W
: 5.8 W
: PAL-type
: Approx. 760 g
Dimensions
:
91 (W) x 119 (H) x 198 (D) mm
(with the viewfinder fully
tilted downward)
: FM recording
: Converted sub-carrier
direct recording
Pickup
Lens
: 1/4” format CCD
: F1.6, f = 3.9 to 62.4 mm,
16:1 power zoom lens with
auto iris and macro control,
filter diameter 40.5 mm
: Electronic viewfinder with
0.5” black/white CRT
Conforms to VHS standard
Cassette
Tape speed
:
cassette
: 23.39 mm/sec.
Viewfinder
Recording time (max.): 60 minutes (with EC-60)
D.S.C. format
Recording format : Digital data storage (based on
White balance
adjustment
: Auto/Manual adjustment
JPEG)
Connectors
Recording medium : Built-in flash memory,
2 Mbyte
JLIP
: ø3.5 mm, 4-pole, mini-head
jack
Number of storable
shots
: FINE mode:
(compatible with RC-5325
plug)
approx. 30 shots
STANDARD mode:
approx. 60 shots
: 640 x 480 pixels
Video
: 1 Vp-p, 75 Ω unbalanced,
analogue output
Image size
(via Video output connector)
(when captured
on a PC)
Audio
: –8 dBs, 1 kΩ analogue output
(via Audio output connector)
Digital
: ø2.5 mm, 4-pole,
mini-head jack
Provided Accessories ..................
pg. 5
੬
AC Power Adapter/Charger AA-V15EG
Power requirement : AC 110 V to 240 V`,
50/60 Hz
Optional Accessories
Power consumption : 23 W
Output
•Battery Packs BN-V12U, BN-V20U, BN-V856U
•Car Battery Charger BH-V3E
Charge
VTR
: DC 8.5 V
: DC 6.3 V
, 1.3 A
, 1.8 A
•Compact VHS-C (
) Cassettes EC-60/45/30
•Active Carrying Bag CB-V7U
•Remote Control Unit RM-V700U
Charging system
: Constant current, peak
detection, timer controlled
Dimensions
Weight
: 140 (W) x 42 (H) x
68 (D) mm
: Approx. 300 g
Some accessories are not available in some areas.
Please consult your nearest JVC dealer for details on
accessories and their availability.
E & O.E. Design and specifications subject to change
without notice.
Cassette Adapter C-P7U
Dimensions
: 188 (W) x 25 (H) x 104 (D)
mm
Weight
: Approx. 240 g
Accessory
: “R6 (AA)”-size battery x 1
MEMO
MEMO
EN
VICTOR COMPANY OF JAPAN, LIMITED
0P2ri9n9teMdKinV*JaUpNan*SN
EG
COPYRIGHT© 1999 VICTOR COMPANY OF JAPAN, LTD.
|