FujiFilm Digital Camera 16221735 User Manual

BL01646-200  
EN  
DIGITAL CAMERA  
Before You Begin  
First Steps  
FINEPIX T400 - T410  
FINEPIX T350 - T360  
Basic Photography and Playback  
More on Photography  
More on Playback  
Movies  
Owners Manual  
Thank you for your purchase  
of this product. This manual  
describes how to use your  
FUJIFILM digital camera and  
the supplied software. Be sure  
that you have read and un-  
derstood its contents and the  
warnings in “For Your Safety”  
(Pii) before using the camera.  
Connections  
Menus  
For information on related products, visit our website at  
http://www.fujifilm.com/products/digital_cameras/index.html  
Technical Notes  
Troubleshooting  
Appendix  
For Your Safety  
mally follow the operating instructions. Ad-  
just only those controls that are covered by  
the operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive work  
by a qualified technician to restore the video  
product to its normal operation.  
Antennas  
Use  
Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from the  
antenna or cable system is connected to the wall outlet before cleaning. Do not use liq-  
video product, be sure the antenna or cable uid cleaners or aerosol cleaners. Use a damp  
system is grounded so as to provide some cloth for cleaning.  
protection against voltage surges and built-  
up static charges. Section 810 of the National  
Object and Liquid Entry: Never push objects  
of any kind into this video product through  
Electrical Code, ANSI/NFPA No. 70, provides  
openings as they may touch dangerous volt-  
When the video product exhibits a distinct  
information with respect to proper ground-  
age points or short out parts that could result  
change in performance—this indicates  
need for service.  
a
ing of the mast and supporting structure,  
in a fire or electric shock. Never spill liquid of  
grounding of the lead-in wire to an antenna  
any kind on the video product.  
Replacement Parts: When replacement parts  
are required, be sure the service technician  
has used replacement parts specified by the  
manufacturer or have the same characteris-  
tics as the original part. Unauthorized sub-  
stitutions may result in fire, electric shock or  
other hazards.  
discharge unit, size of grounding conductors,  
Lightning: For added protection for this video  
product receiver during a lightning storm, or  
when it is left unattended and unused for  
long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable  
system. This will prevent damage to the  
video product due to lightning and power-  
line surges.  
location of antenna discharge unit, connec-  
tion to grounding electrodes, and require-  
ments for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
Ground Clamp  
Antenna Lead  
in Wire  
Safety Check: Upon completion of any service  
or repairs to this video product, ask the ser-  
vice technician to perform safety checks to  
determine that the video product is in proper  
operating condition.  
Service  
Antenna  
Electric Service  
Equipment  
Servicing: Do not attempt to service this video  
product yourself as opening or removing cov-  
ers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified  
service personnel.  
Discharge Unit  
(NEC SECTION  
810-20)  
Ground Clamps  
Grounding  
Conductors  
(NEC SECTION  
810-21)  
Damage Requiring Service: Unplug this video  
product from the wall outlet and refer servic-  
ing to qualified service personnel under the  
following conditions:  
Power Service Grounding  
Electrode System (NEC ART  
250. PART H)  
Power Lines: An outside antenna system • When the power-supply cord or plug is  
should not be located in the vicinity of over-  
damaged.  
head power lines or other electric light or • If liquid has been spilled, or objects have  
power circuits, or where it can fall into such  
fallen into the video product.  
power lines or circuits. When installing an • If the video product has been exposed to  
outside antenna system, extreme care should  
rain or water.  
be taken to keep from touching such power • If the video product has been dropped or  
lines or circuits as contact with them might  
be fatal.  
the cabinet has been damaged.  
If the video product does not operate nor-  
iii  
For Your Safety  
Be sure to read these notes before use  
WARNING  
Safety Notes  
Do not use the camera in the bathroom or shower. This can cause  
a fire or electric shock.  
• Make sure that you use your camera correctly. Read these safety  
notes and your Owner’s Manual carefully before use.  
Do not use in  
the bathroom or  
shower  
• After reading these safety notes, store them in a safe place.  
Never attempt to change or take apart the camera (never open  
the case). Failure to observe this precaution can cause fire or  
electric shock.  
About the Icons  
The icons shown below are used in this document to indicate the  
severity of the injury or damage that can result if the information  
indicated by the icon is ignored and the product is used incorrectly  
as a result.  
Do not  
disassemble  
Should the case break open as the result of a fall or other accident,  
do not touch the exposed parts. Failure to observe this precau-  
tion could result in electric shock or in injury from touching the  
damaged parts. Remove the battery immediately, taking care  
to avoid injury or electric shock, and take the product to the  
point of purchase for consultation.  
Do not touch  
internal parts  
This icon indicates that death or serious injury can result if the  
information is ignored.  
WARNING  
Do not change, heat or unduly twist or pull the connection cord and  
do not place heavy objects on the connection cord. These actions  
could damage the cord and cause a fire or electric shock. If the  
cord is damaged, contact your FUJIFILM dealer.  
This icon indicates that personal injury or material damage can  
result if the information is ignored.  
CAUTION  
The icons shown below are used to indicate the nature of the instruc-  
tions which are to be observed.  
Do not place the camera on an unstable surface. This can cause the  
camera to fall or tip over and cause injury.  
Triangular icons tell you that this information requires atten-  
tion (“Important”).  
Never attempt to take pictures while in motion. Do not use the  
camera while you are walking or driving a vehicle. This can  
result in you falling down or being involved in a traffic accident.  
Circular icons with a diagonal bar tell you that the action indi-  
cated is prohibited (“Prohibited”).  
Do not touch any metal parts of the camera during a thunderstorm.  
This can cause an electric shock due to induced current from  
the lightning discharge.  
Filled circles with an exclamation mark indicate an action that  
must be performed (“Required”).  
Do not use the battery except as specified. Load the battery as  
shown by the indicator.  
WARNING  
Do not heat, change or take apart the battery. Do not drop or subject  
the battery to impacts. Do not store the battery with metallic prod-  
ucts. Any of these actions can cause the battery to burst or leak  
and cause fire or injury as a result.  
If a problem arises, turn the camera off, remove the battery, and  
disconnect and unplug the AC power adapter. Continued use of  
the camera when it is emitting smoke, is emitting any unusual  
Unplug from  
power socket  
odor, or is in any other abnormal state can cause a fire or elec-  
tric shock. Contact your FUJIFILM dealer.  
Use only the battery or AC power adapters specified for use with this  
camera. Do not use voltages other than the power supply voltage  
shown. The use of other power sources can cause a fire.  
If the battery leaks and fluid gets in contact with your eyes, skin or  
clothing, flush the affected area with clean water and seek medical  
attention or call an emergency number right away.  
Do not allow water or foreign objects to enter the camera. If water  
or foreign objects get inside the camera, turn the camera off,  
remove the battery, and disconnect and unplug the AC power  
adapter. Continued use of the camera can cause a fire or elec-  
tric shock. Contact your FUJIFILM dealer.  
Avoid exposure  
to water  
iv  
For Your Safety  
WARNING  
CAUTION  
Do not use the charger to charge batteries other than those speci-  
fied here. The supplied battery charger is for use only with the  
type of battery supplied with the camera. Using the charger to  
charge conventional batteries or other types of rechargeable  
batteries can cause the battery to leak fluid, overheat or burst.  
When you are cleaning the camera or you do not plan to use the  
camera for an extended period, remove the battery and disconnect  
and unplug the AC power adapter. Failure to do so can cause a  
fire or electric shock.  
When charging ends, unplug the charger from the power socket.  
Leaving the charger plugged into the power socket can cause  
a fire.  
Danger of explosion if battery is incorrectly replaced. Replace only  
with the same or equivalent type.  
Unplug from  
power socket  
When carrying the battery, install it in a digital camera or keep it  
in the hard case. When storing the battery, keep it in the hard case.  
When discarding, cover the battery terminals with insulation tape.  
Contact with other metallic objects or batteries could cause  
the battery to ignite or burst.  
Using a flash too close to a person’s eyes may temporarily affect the  
eyesight. Take particular care when photographing infants and  
young children.  
When a memory card is removed, the card could come out of the slot  
too quickly. Use your finger to hold it and gently release the card.  
Injury could result to those struck by the ejected card.  
Request regular internal testing and cleaning for your camera.  
Build-up of dust in your camera can cause a fire or electric  
shock. Contact your FUJIFILM dealer to request internal clean-  
ing every two years. Please note that this service is not free  
of charge.  
Keep memory cards out of the reach of small children. Because  
memory cards are small, they can be swallowed by children.  
Be sure to store memory cards out of the reach of small chil-  
dren. If a child swallows a memory card, seek medical atten-  
tion or call an emergency number.  
CAUTION  
Remove your fingers from the flash window before the flash fires.  
Failure to observe this precaution could result in burns.  
Do not use this camera in locations affected by oil fumes, steam, hu-  
midity or dust. This can cause a fire or electric shock.  
Keep the flash window clean and do not use the flash if the window  
is obstructed. Failure to observe these precautions could cause  
smoke or discoloration.  
Do not leave this camera in places subject to extremely high temper-  
atures. Do not leave the camera in locations such as a sealed  
vehicle or in direct sunlight. This can cause a fire.  
Keep out of the reach of small children. This product could cause  
injury in the hands of a child.  
Do not place heavy objects on the camera. This can cause the  
heavy object to tip over or fall and cause injury.  
Do not move the camera while the AC power adapter is still connect-  
ed. Do not pull on the connection cord to disconnect the AC power  
adapter. This can damage the power cord or cables and cause  
a fire or electric shock.  
Do not use the AC power adapter when the plug is damaged or the  
plug socket connection is loose. This could cause a fire or electric  
shock.  
Do not cover or wrap the camera or the AC power adapter in a cloth  
or blanket. This can cause heat to build up and distort the cas-  
ing or cause a fire.  
v
For Your Safety  
Charging the Battery  
Cautions: Handling the Battery  
The Battery and Power Supply  
Charge the battery in the supplied battery • Do not transport or store with metal objects  
charger. Charging times will increase at am-  
bient temperatures below +10 °C (+50 °F) or • Do not expose to flame or heat.  
above +35 °C (+95 °F). Do not attempt to • Do not disassemble or modify.  
charge the battery at temperatures above • Use with designated chargers only.  
40 °C (+104 °F); at temperatures below 0 °C • Do not drop or subject to strong physical  
Note: Check the type of battery used in  
your camera and read the appropriate  
sections.  
such as necklaces or hairpins.  
The following describes the proper use of  
batteries and how to prolong their life. Incor-  
rect use can shorten battery life or cause leak-  
age, overheating, fire, or explosion.  
(+32 °F), the battery will not charge.  
shocks.  
• Do not expose to water.  
• Keep the terminals clean.  
• The battery and camera body may become  
warm to the touch after extended use. This  
is normal.  
Do not attempt to recharge a fully charged  
battery. The battery does not however need  
to be fully discharged before charging.  
Li-ion Batteries  
Read this section if your camera uses a  
rechargeable Li-ion battery.  
The battery may be warm to the touch imme-  
diately after charging or use. This is normal.  
The battery is not charged at shipment.  
Charge the battery before use. Keep the bat-  
tery in its case when not in use.  
AA Alkalline/Rechargeable Ni-MH Batteries  
Read this section if your camera uses AA  
alkaline or rechargeable AA Ni-MH bat-  
teries. Information on compatible battery  
types may be found elsewhere in the camera  
manual.  
Battery Life  
At normal temperatures, the battery can be  
recharged about 300 times. A noticeable de-  
crease in the length of time the battery will  
hold a charge indicates that it has reached  
the end of its service life and should be re-  
placed.  
Notes on the Battery  
The battery gradually loses its charge when  
not in use. Charge the battery one or two  
days before use.  
Cautions: Handling the Batteries  
• Do not expose to water, flame, or heat, or  
store in warm or humid conditions.  
• Do not transport or store with metal objects  
such as necklaces or hairpins.  
• Do not disassemble or modify the batteries  
or battery casing.  
• Do not subject to strong physical shocks.  
• Do not use batteries that are leaking, de-  
formed, or discolored.  
Battery life can be extended by turning the  
camera off when not in use.  
Storage  
Performance may be impaired if the battery is  
left unused for extended periods when fully  
charged. Run the battery flat before storing it.  
Battery capacity decreases at low tempera-  
tures; a depleted battery may not function at  
when cold. Keep a fully charged spare bat-  
tery in a warm place and exchange as nec-  
essary, or keep the battery in your pocket or  
other warm place and insert it in the camera  
only when shooting. Do not place the bat-  
tery in direct contact with hand warmers or  
other heating devices.  
If the camera will not be used for an extended  
period, remove the battery and store it in a  
dry place with an ambient temperature of  
from +15 °C to +25 °C (+59 °F to +77 °F). Do  
not store in locations exposed to extremes of  
temperature.  
• Keep out of reach of infants and small chil-  
dren.  
• Insert in the correct orientation.  
vi  
For Your Safety  
• Do not mix old and new batteries, batteries Ni-MH Batteries  
with different charge levels, or batteries of The capacity of Ni-MH batteries may be  
AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)  
This section applies to all camera models.  
Use only FUJIFILM AC power adapters desig-  
nated for use with this camera. Other adapt-  
ers could damage the camera.  
different types.  
temporarily reduced when new, after long  
• If the camera will not be used for an extend- periods of disuse, or if they are repeatedly  
ed period, remove the batteries. Note that recharged before being fully discharged. This  
the camera clock will be reset.  
is normal and does not indicate a malfunc-  
• The AC power adapter is for indoor use only.  
• Be sure the DC plug is securely connected  
to the camera.  
• Turn the camera off before disconnecting  
the adapter. Disconnect the adapter by the  
plug, not the cable.  
• The batteries may be warm to the touch tion. Capacity can be increased by repeatedly  
immediately after use. Turn the camera discharging the batteries using the discharge  
off and allow the batteries to cool before option in the camera setup menu and re-  
handling.  
charging them using a battery charger (sold  
• Battery capacity tends to decrease at low separately).  
temperatures. Keep spare batteries in  
a
• Do not use with other devices.  
• Do not disassemble.  
Q
CAUTION: Do not use the discharge option  
with alkaline batteries.  
pocket or other warm place and exchange  
as necessary. Cold batteries may recover  
some of their charge when warmed.  
• Fingerprints and other stains on the battery  
terminals can impair battery performance.  
Thoroughly clean the terminals with  
soft, dry cloth before inserting them in the  
camera.  
• Do not expose to high heat and humidity.  
• Do not subject to strong physical shocks.  
• The adapter may hum or become hot to the  
touch during use. This is normal.  
• If the adapter causes radio interference,  
reorient or relocate the receiving antenna.  
The camera draws a small amount of current  
even when off. Ni-MH batteries that have  
been left in the camera for an extended pe-  
riod may be drawn down to the point that  
they no longer hold a charge. Battery perfor-  
mance may also drop if the batteries are run  
down in a device such as a flashlight. Use the  
discharge option in the camera setup menu  
to discharge Ni-MH batteries. Batteries that  
no longer hold a charge even after repeat-  
edly being discharged and recharged have  
reached the end of their service life and must  
be replaced.  
a
If the batteries leak, clean the battery  
compartment thoroughly before in-  
serting new batteries.  
If fluid from the battery comes into  
contact with skin or clothing, flush  
the affected area with water. If fluid  
enters your eyes, immediately flush the  
affected area with water and seek  
medical attention. Do not rub your eyes.  
Failure to observe this precaution could  
result in permanent visual impairment.  
Ni-MH batteries can be recharged in a bat-  
tery charger (sold separately). Batteries may  
become warm to the touch after charging.  
Refer to the instructions provided with the  
charger for more information. Use the char-  
ger with compatible batteries only.  
Ni-MH batteries gradually lose their charge  
when not in use.  
Disposal  
Dispose of used batteries in accord with local  
regulations.  
vii  
For Your Safety  
Liquid CCrystal  
Electrical Innterference  
Using the Camera  
In the event that the LCD monitor is damaged, This camera may interfere with hospital or  
care should be taken to avoid contact with liq- aviation equipment. Consult with hospital  
uid crystal. Take the urgent action indicated or airline staff before using the camera in a  
Do not aim the camera at extremely bright  
light sources, such as the sun in a cloudless  
sky. Failure to observe this precaution could  
damage the camera image sensor.  
should any of the following situations arise:  
hospital or on an aircraft.  
If liquid crystal comes in contact with your  
skin, clean the area with a cloth and then  
wash thoroughly with soap and running  
water.  
If liquid crystal enters your eyes, flush the af-  
fected eye with clean water for at least 15  
minutes and then seek medical assistance.  
If liquid crystal is swallowed, rinse your  
mouth thoroughly with water. Drink large  
quantities of water and induce vomiting,  
then seek medical assistance.  
Color Television Systems  
Take Test Shots  
NTSC (National Television System Committee)  
is a color television telecasting specification  
adopted mainly in the U.S.A., Canada, and  
Japan. PAL (Phases Alternation by Line) is  
a color television system adopted mainly in  
European countries and China.  
Before taking photographs on important  
occasions (such as at weddings or before  
taking the camera on a trip), take a test shot  
and view the result in the LCD monitor to en-  
sure that the camera is functioning normally.  
FUJIFILM Corporation can not accept liability  
for damages or lost profits incurred as a result  
of product malfunction.  
Exif Print (Exif Version 2.3)  
Exif Print is a newly revised digital camera file  
format in which information stored with pho-  
tographs is used for optimal color reproduc-  
tion during printing.  
Notes on Copyright  
Unless intended solely for personal use, imag-  
es recorded using your digital camera system  
cannot be used in ways that infringe copy-  
right laws without the consent of the owner.  
Note that some restrictions apply to the  
photographing of stage performances, enter-  
tainments, and exhibits, even when intended  
purely for personal use. Users are also asked  
to note that the transfer of memory cards  
containing images or data protected under  
copyright laws is only permissible within the  
restrictions imposed by those copyright laws.  
Although the display is manufactured using  
extremely high-precision technology, it may  
contain pixels that are always lit or that do not  
light. This is not a malfunction, and images re-  
corded with the product are unaffected.  
IMPORTANT NOTICE:  
Read Before Using the Software  
Direct or indirect export, in whole or in part,  
of licensed software without the permission  
of the applicable governing bodies is pro-  
hibited.  
Trademarkk Information  
xD-Picture Card and Eare trademarks of  
FUJIFILM Corporation. The typefaces included  
herein are solely developed by DynaComware  
Taiwan Inc. Macintosh, QuickTime, and Mac  
OS are trademarks of Apple Inc. in the U.S.A.  
and other countries. Windows 7, Windows  
Vista, and the Windows logo are trademarks  
of the Microsoft group of companies. Adobe  
and Adobe Reader are either trademarks  
or registered trademarks of Adobe Systems  
Incorporated in the U.S.A. and/or other  
countries. The SDHC and SDXC logos are  
trademarks of SD-3C, LLC. The HDMI logo is a  
trademark. YouTube is a trademark of Google  
Inc. All other trade names mentioned in  
this manual are the trademarks or registered  
trademarks of their respective owners.  
Haandling  
To ensure that images are recorded correctly,  
do not subject the camera to impact or physi-  
cal shocks while images are being recorded.  
viii  
About This Manual  
Before using the camera, read this manual and the warnings inFor Your Safe-  
ty(Pii). For information on specific topics, consult the sources below.  
Table of Contents .............................Pxi Troubleshooting ............................ P86  
The “Table of Contents” gives an Having a specific problem with the  
overview of the entire manual. The camera? Find the answer here.  
principal camera operations are list-  
ed here.  
Warning MMessaggeess aanndd Displays ..... P91  
Find out what’s behind that flashing  
icon or error message in the display.  
Memoryy Caarrds  
Pictures can be stored in an optional SD, SDHC, and SDXC memory cards (P9), re-  
ferred to in this manual asmemory cards.  
ix  
Frequeently--Usseedd BBuuttttons  
Turning the Caamera onn iin Playbaack Mode  
yWhen the camera is  
off, playback can be  
Takiinngg PPictureess DDuurriinngg Playback  
yTo return instantly to shooting mode,  
press the shutter button halfway.  
started by pressing the  
abutton for about a  
second.  
Shoot  
View  
ꢀꢀ  
Silent Mode  
Deletingg Pictures  
yPress the selector up (b)  
to display deletion op-  
tions.  
yPress and hold the DISP/  
BACK button to disable  
camera lights and  
sounds.  
x
Table of Contents  
For Your Safety ..................................................................ii  
IMPORTANT SAFETY INSTRUCTIONS ..................................ii  
Safety Notes ..................................................................iv  
About This Manual ...........................................................ix  
Frequently-Used Buttons .................................................x  
Moree oonn PPhotography  
Shooting Mode................................................................20  
Choosing a Shooting Mode ............................................20  
Shooting Mode Options .................................................21  
rPANORAMA...........................................................23  
Focus Lock........................................................................26  
dExposure Compensation..........................................28  
FMacro Mode (Close-ups) ...........................................29  
NUsing the Flash (Intelligent Flash) ............................30  
hUsing the Self-Timer .................................................32  
bIntelligent Face Detection.......................................33  
nFace Recognition......................................................34  
Adding New Faces..........................................................34  
Viewing, Editing, and Deleting Existing Data .................36  
Adding Faces Automatically ...........................................36  
Beforre You Begin  
Symbols and Conventions.................................................1  
Supplied Accessories.........................................................1  
Parts of the Camera ..........................................................2  
Camera Displays...............................................................4  
Shooting ........................................................................4  
Playback.........................................................................5  
First Steps  
Inserting the Battery and a Memory Card.......................6  
Compatible Memory Cards ...............................................9  
Charging the Battery ......................................................11  
Turning the Camera on and Off......................................13  
Shooting Mode ..............................................................13  
Playback Mode...............................................................13  
Basic Setup ......................................................................15  
Moree oon Playback  
Playback Options.............................................................38  
IFavorites: Rating Pictures .........................................38  
Playback Zoom...............................................................39  
Multi-Frame Playback....................................................40  
ADeleting Pictures......................................................41  
bImage Search............................................................42  
kPhotoBook Assist .....................................................43  
Creating a PhotoBook.....................................................43  
Viewing Photobooks ......................................................44  
Editing and Deleting Photobooks...................................44  
Viewing Panoramas ........................................................45  
Basic Photography and Playback  
Taking Pictures in Q(Scene Recognition) Mode......16  
Viewing Pictures .............................................................19  
xi  
Table of Contents  
Movies  
Menus  
Recording Movies............................................................46  
Using the Menus: Shooting Mode..................................61  
Using the Shooting Menu...............................................61  
Shooting Menu Options .................................................61  
ASHOOTING MODE....................................................61  
NISO........................................................................61  
OIMAGE SIZE............................................................62  
TIMAGE QUALITY .....................................................63  
PFINEPIX COLOR .......................................................63  
DWHITE BALANCE ....................................................64  
RCONTINUOUS .........................................................64  
bFACE DETECTION ....................................................65  
FAF MODE...............................................................65  
nFACE RECOGNITION.................................................65  
PPANORAMA MODE .................................................65  
FMOVIE AF MODE ....................................................66  
WMOVIE MODE.........................................................66  
Viewing Movies ...............................................................48  
Coonnnneections  
Viewing Pictures on TV ...................................................49  
Printing Pictures via USB................................................50  
Printing the DPOF Print Order.........................................52  
Viewing Pictures on a Computer....................................54  
Windows: Installing MyFinePix Studio ...........................54  
Macintosh: Installing FinePixViewer...............................56  
Connecting the Camera..................................................58  
xii  
Table of Contents  
Using the Menus: Playback Mode ..................................67  
Using the Playback Menu...............................................67  
Playback Menu Options..................................................67  
kPHOTOBOOK ASSIST................................................67  
bIMAGE SEARCH ......................................................67  
AERASE ...................................................................67  
iMOVIE EDIT ...........................................................68  
jMARK FOR UPLOAD TO............................................69  
ISLIDE SHOW ..........................................................70  
BRED EYE REMOVAL .................................................70  
DPROTECT................................................................71  
GCROP.....................................................................71  
ORESIZE...................................................................72  
CIMAGE ROTATE .......................................................72  
iERASE FACE RECOG. ................................................73  
KPRINT ORDER (DPOF) ..............................................73  
The Setup Menu ..............................................................74  
Using the Setup Menu....................................................74  
Setup Menu Options ......................................................75  
FDATE/TIME ............................................................75  
NTIME DIFFERENCE ...................................................75  
La......................................................75  
oSILENT MODE.........................................................75  
RRESET....................................................................76  
KFORMAT ................................................................76  
AIMAGE DISP. ...........................................................76  
BFRAME NO. ............................................................77  
GOPERATION VOL. ....................................................77  
HSHUTTER VOLUME ..................................................77  
eSHUTTER SOUND....................................................78  
IPLAYBACK VOLUME ................................................78  
JLCD BRIGHTNESS ....................................................78  
ELCD MODE .............................................................78  
MAUTO POWER OFF...................................................78  
LDUAL IS MODE .......................................................78  
BRED EYE REMOVAL .................................................79  
mBLINK DETECTION...................................................79  
DDIGITAL ZOOM .......................................................80  
pMOVIE ZOOM TYPE .................................................80  
nSAVE ORG IMAGE....................................................80  
OBACKGROUND COLOR..............................................81  
cGUIDANCE DISPLAY ................................................81  
QVIDEO SYSTEM .......................................................81  
SDATE STAMP..........................................................81  
xiii  
Table of Contents  
Techniccaall NNotes  
Troubleshooting  
Optional Accessories .......................................................82  
Printing........................................................................82  
Computer Related..........................................................82  
Audio/Visual.................................................................82  
Accessories from FUJIFILM..............................................83  
Caring for the Camera.....................................................84  
Storage and Use .............................................................84  
Water and Sand.............................................................84  
Condensation................................................................84  
Cleaning.........................................................................85  
Traveling ........................................................................85  
Problems and Solutions..................................................86  
Warning Messages and Displays ....................................91  
Appendix  
Tips and Tricks..................................................................95  
Memory Card Capacity....................................................98  
FinePix T400 - T410 .......................................................98  
FinePix T350 - T360 .......................................................99  
Specifications ................................................................100  
xiv  
Before You Begin  
Symbols andd Convventions  
The following symbols are used in this manual:  
Q: This information should be read before use to ensure correct operation.  
R: Additional information that may be helpful when using the camera.  
P: Other pages in this manual on which related information may be found.  
Menus and other text in the LCD monitor are shown in bold. In the illustra-  
tions in this manual, displays may be simplified for explanatory purposes.  
Supplied Accessories  
The following items are included with the camera:  
NP-45A or NP-45B  
AC power adapter*  
USB cable  
CD-ROM (contains  
rechargeable battery  
this manual)  
Attttaacchhiing the Strap  
Attach the strap as  
shown.  
• Strap  
User Guide/  
Basic Manual  
* Shape of adapter varies with region of sale.  
1
Parts of the Camera  
For more information, refer to the page listed to the right of each item.  
Selector button  
Move cursor up  
d(exposure compensation) button (P28)  
b(delete) button (Px)  
MENU/OK button  
Move cursor left  
F(macro) button (P29)  
Move cursor right  
N(flash) button (P30)  
Move cursor down  
h(self-timer) button (P32)  
* Illustrations in this manual may be simplified for explanatory purposes.  
2
Before You Begin  
Parts of the Camera  
1 Shutter button.............................................................. 18 12 t(movie recording) button........................................ 46  
2 ON/OFF button ............................................................. 13 13 DISP (display)/BACK button .....................................5, 15  
3 Self-timer lamp ............................................................ 32  
o(silent mode) button* ............................................... X  
4 Flash............................................................................. 30 14 Battery-chamber cover................................................... 6  
5 Microphone .................................................................. 46 15 USB multi-connector .........................................49, 50, 58  
6 Lens and lens cover  
16 Tripod mount  
7 LCD monitor.................................................................... 4 17 Speaker......................................................................... 48  
8 W (zoom out) button...............................................17, 39 18 Memory card slot............................................................ 7  
9 T (zoom in) button...................................................17, 39 19 Battery chamber............................................................. 6  
10 a(playback) button .................................................. 19 20 Battery latch................................................................6, 8  
11 Strap eyelet .................................................................... 1  
*Press and hold the DISP/BACK button until ois displayed.  
Before You Begin  
3
Parts of the Camera  
Camera Displays  
The following types of indicator may be displayed during shooting and play-  
back. Indicators vary with camera settings.  
Shooting  
7 Number of available frames.......................................... 98  
8 Sensitivity..................................................................... 61  
9 Image size/Image quality ........................................62, 63  
10 Focus warning .........................................................18, 91  
11 FINEPIX color ................................................................ 63  
12 White balance............................................................... 64  
13 Battery level ................................................................... 5  
14 Dual IS mode ................................................................ 78  
15 Exposure compensation................................................ 28  
16 Shutter speed/Aperture  
1 Shooting mode............................................................. 20 17 Date and time............................................................... 15  
2 Intelligent Face Detection indicator .............................. 33 18 Blur warning............................................................31, 91  
3 Continuous shooting mode........................................... 64 19 Focus frame .................................................................. 26  
4 Silent mode indicator ................................................3, 75 20 Self-timer indicator ...................................................... 32  
5 Date stamp ................................................................... 81 21 Macro (close-up) mode................................................. 29  
6 Movie mode.................................................................. 47 22 Flash mode ................................................................... 30  
4
Before You Begin  
Parts of the Camera  
Playback  
1 Playback mode indicator..........................................19, 38  
2 Intelligent Face Detection indicator .........................33, 65  
3 Red-eye removal indicator............................................ 70  
4 Silent mode indicator ................................................3, 75  
5 Gift image..................................................................... 38  
6 Frame number.............................................................. 77  
7 Mark for upload to........................................................ 69  
8 Photobook assist........................................................... 43  
9 Favorites ....................................................................... 38  
10 DPOF print indicator ..................................................... 52  
11 Protected image ........................................................... 71  
Batterryy LLevel  
Battery level is shown as follows:  
Indicator  
Description  
D(white)  
C(white)  
B(red)  
Battery partially discharged.  
Battery more than half discharged.  
Low battery. Charge as soon as possible.  
A(blinks red) Battery exhausted. Turn camera off and charge battery.  
Hiding and Viewing Indicators  
Press DISP/BACK to cycle through shooting and playback indicators as follows:  
Shooting: Indicators displayed/indicators hidden/best framing  
Playback: Indicators displayed/indicators hidden/Ifavorites  
Before You Begin  
5
First Steps  
Innsseertinng the Baatttterryy aanndd aa MMemory Cardd  
Insert the battery and memory card as described below.  
Open the battery-chamber cover.  
R Be sure the camera is off before opening the  
battery-chamber cover.  
1
Q Do not open the battery-chamber cover  
when the camera is on. Failure to observe  
this precaution could result in damage to  
image files or memory cards.  
Q Do not use excessive force when handling the battery-chamber cover.  
Insert the battery.  
2
Orange stripe  
Align the orange stripe on the battery with  
the orange battery latch and slide the bat-  
tery into the camera, keeping the battery  
latch pressed to one side. When inserting  
the battery, be sure that the battery is se-  
cured by the orange battery latch. If the bat-  
tery is not securely latched, the camera may  
not turn on or may turn off without warning.  
Battery latch  
The camera uses an NP-45A/NP-45B re-  
chargeable battery.  
Q Insert the battery in the correct orientation. Do NOT use force or attempt to insert  
the battery upside down or backwards. The battery will slide in easily in the cor-  
rect orientation.  
6
Inserting the Battery and a Memory Card  
Insert the memory card.  
3
Holding the memory card in the  
orientation shown at right, slide it in  
until it clicks into place at the back  
of the slot.  
Q Be sure card is in the correct orienta-  
tion; do not insert at an angle or use  
force.  
Battery  
Click  
Q SD/SDHC/SDXC memory cards can be locked, making  
it impossible to format the card or to record or delete  
images. Before inserting an SD/SDHC/SDXC memory  
card, slide the write-protect switch to the unlocked  
position.  
Write-protect switch  
Close the battery-chamber cover.  
4
First Steps  
7
Inserting the Battery and a Memory Card  
Reemoving the Battery annd Memorry Caarrdd  
Before removing the battery or memory card, turn the camera off and open the  
battery-chamber cover.  
Battery latch  
To remove the battery, press the battery latch to the side, and  
slide the battery out of the camera as shown.  
To remove the memory card, press it in and release it slowly.  
The card can then be removed by hand. When a memory card  
is removed, the card could come out of the slot too quickly. Use  
your finger to hold it and gently release the card.  
8
First Steps  
Inserting the Battery and a Memory Card  
Compatible Memory Cards  
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-  
proved for use in the camera. A complete list of approved memory cards  
is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.  
Operation is not guaranteed with other cards. The camera can not be used  
with xD-Picture Cards or MultiMediaCard (MMC) devices.  
Q Memory Caarrds  
Do not turn the camera off or remove the memory card while the memory card is being formatted  
or data are being recorded to or deleted from the card. Failure to observe this precaution  
could damage the card.  
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all  
memory cards after using them in a computer or other device. For more information  
on formatting memory cards, seeKFORMAT” (P76).  
• Memory cards are small and can be swallowed; keep out of reach of children. If a  
child swallows a memory card, seek medical assistance immediately.  
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of  
an SD/SDHC/SDXC memory card may not eject normally; if the card does not eject, take  
the camera to an authorized service representative. Do not forcibly remove the card.  
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.  
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory  
card. Use a Gcard or better when shooting HD.  
• Formatting a memory card in the camera creates a folder in which pictures are  
stored. Do not rename or delete this folder or use a computer or other device to  
edit, delete, or rename image files. Always use the camera to delete pictures; before  
editing or renaming files, copy them to a computer and edit or rename the copies,  
not the originals.  
First Steps  
9
Inserting the Battery and a Memory Card  
Q Batteries  
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this  
precaution could prevent the battery from charging.  
• Do not affix stickers or other objects to the battery. Failure to observe this precaution  
could make it impossible to remove the battery from the camera.  
• Do not short the battery terminals. The battery could overheat.  
• Read the cautions inThe Battery and Power Supply(Pvi).  
• Use only battery chargers designated for use with the battery. Failure to observe this  
precaution could result in product malfunction.  
• Do not remove the labels from the battery or attempt to split or peel the outer casing.  
• The battery gradually loses its charge when not in use. Charge the battery one or  
two days before use.  
10  
First Steps  
Chhaarrggiinngg the Batteerryy  
The battery is not charged at shipment. Charge the battery before use. The  
camera charges the battery internally.  
Charge the battery.  
1
Turn the camera off and connect the cam-  
era to the supplied AC power adapter us-  
ing the supplied USB cable. Then plug the  
AC power adapter into an indoor power  
outlet.  
Q Be sure the connectors are in the correct ori-  
entation and then insert them fully.  
R The camera operates in external power mode if the camera is turned on while  
plugged into AC power.  
Thhee CChharggiinngg IInnddiiccaattor  
The charging indicator is displayed in the center of the LCD monitor.  
Charging indicator  
Battery status  
Battery charging.  
Battery fault.  
Action  
a
s
For battery troubleshooting, see page 86.  
Battery fully charged.  
(No icon)  
Unplug thee AC power aadapter frrom the power  
outlet and reinsert the battery in the correct  
orientation (P86).  
Charging unavail-  
able.  
The charging indicator will disappear when charging completes.  
First Steps  
11  
Charging the Battery  
Charggiinng via a computer  
The battery can be charged by connecting the camera to a computer.  
Turn the camera off and connect the sup-  
plied USB cable as shown, making sure the  
connectors are fully inserted. Connect the  
camera directly to the computer; do not  
use a USB hub or keyboard.  
Q If the camera is turned on, charging is not available.  
Q If the computer goes into sleep mode while charging, charging will stop. To  
continue charging, disable sleep mode on the computer, and disconnect and  
connect the USB cable.  
Q Charging may be impossible depending on computer specifications, settings  
or conditions.  
12  
First Steps  
Turning the Camera on and Off  
Shooting Mode  
Playback Mode  
Press the ON/OFF button to turn the To turn the camera on and begin  
camera on. The lens will extend and playback, press the a button for  
the lens cover will open.  
about a second.  
Press the a button again or press  
the ON/OFF button to turn the camera  
off.  
Press ON/OFF again to turn the camera  
off.  
R Switching to Shooting Mode  
R Switching to Playback Mode  
To exit to shooting mode, press the shut-  
ter button halfway. Press the abutton  
to return to playback.  
Press the a button to start playback.  
Press the shutter button halfway to return  
to shooting mode.  
First Steps  
13  
Turning the Camera on and Off  
Q Forcibly obstructing the lens could cause damage or product malfunction.  
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.  
Q The ON/OFF button does not completely end the supply of power to the camera.  
R Auto Power Off  
The camera will turn off automatically if no operations are performed for the length of  
time selected for MAUTO POWER OFF (P78).  
14  
First Steps  
Baassic SSetup  
A language-selection dialog is displayed the first time the camera is turned  
on. Set up the camera as described below (you can reset the clock or change  
languages at any time using the FDATE/TIME or La options in  
the setup menu; for information on displaying the setup menu, see page 74).  
Highlight a language and press MENU/OK.  
1
R Press DISP/BACK to skip the current step. Any steps you skip  
will be displayed the next time the camera is turned on.  
The date and time will be displayed. Press the selector  
left or right to highlight the year, month, day, hour, or  
minute and press up or down to change. To change the  
order in which the year, month, and day are displayed,  
highlight the date format and press the selector up or  
down. Press MENU/OK when settings are complete.  
2
R Thhee CCamera Clock  
If the battery is removed for an extended period, the camera clock will be reset and the  
language-selection dialog will be displayed when the camera is turned on.  
First Steps  
15  
Basic Photography and Playback  
Taking Pictures in Q(Scene Recoognitionn)) MMode  
This section describes how to take pictures in Q(scene recognition) mode.  
The camera automatically analyzes the composition and adjusts settings ap-  
propriately.  
Turn the camera on.  
1
Press the ON/OFF button to turn the camera  
on. Q shooting indicators will be dis-  
played.  
The gIccoon  
This icon indicates that the camera continuously searches for faces to select the  
appropriate scene, increasing the drain on the battery.  
Scene IIcon  
The camera selects the scene according to shooting conditions and the type of  
subject: bPORTRAIT (portraits), cLANDSCAPE (landscapes), dNIGHT (poorly-lit land-  
scapes), eMACRO (close ups), fNIGHT PORTRAIT (poorly-lit portraits), gBACKLIT PORTRAIT  
(backlit portraits), aAUTO (all other scenes)  
16  
Taking Pictures in Q(Scene Recognition) Mode  
Frame the picture.  
Use the zoom buttons to frame the picture in the display.  
2
Zoom out  
Zoom in  
Zoom indicator  
Hoollddiinngg tthhee CCamera  
Hold the camera steady with both hands and brace your  
elbows against your sides. Shaking or unsteady hands can  
blur your shots.  
To prevent pictures that are out of focus or too dark (under-  
exposed), keep your fingers and other objects away from  
the lens and flash.  
Basic Photography and Playback  
17  
Taking Pictures in Q(Scene Recognition) Mode  
Focus.  
3
Press the shutter button halfway to focus.  
Double  
beep  
R The lens may make a noise when the camera focuses; this  
is normal.  
If the camera is able to focus, it will beep twice.  
If the camera is unable to focus, the focus frame will turn red, swill be dis-  
played. Change the composition or use focus lock (P26).  
Shoot.  
4
Smoothly press the shutter button the rest of the way  
down to take the picture.  
Click  
R If the subject is poorly lit, the flash may fire when the pic-  
ture is taken. For information on using the flash when  
lighting is poor, see “N Using the Flash (Intelligent Flash)”  
(P30).  
Thhee SShhuuttter Button  
The shutter button has two positions. Pressing the shutter button halfway sets  
focus and exposure; to shoot, press the shutter button the rest of the way down.  
18  
Basic Photography and Playback  
Viewing Pictures  
Pictures can be viewed in the LCD monitor. When taking important photo-  
graphs, take a test shot and check the results.  
Press the abutton.  
The most recent picture will be displayed.  
1
View additional pictures.  
2
Press the selector right to view pictures in  
the order recorded, left to view pictures in  
reverse order.  
Press the shutter button to exit to shooting  
mode.  
Basic Photography and Playback  
19  
More on Photography  
Shhooottiinngg MMode  
Choose a shooting mode according to the scene or type of subject.  
Choosing a Shooting Mode  
Press MENU/OK to display the shooting menu.  
1
Highlight ASHOOTING MODE and press the  
selector right to display shooting mode options.  
2
Highlight the desired mode and press MENU/OK.  
3
4
Press DISP/BACK to exit to shooting mode.  
20  
Shooting Mode  
Shooting Mode Options  
Scene  
Description  
The camera automatically analyzes the composition and selects a scene  
according to shooting conditions and the type of subject.  
QSCENE RECOGNITION  
Choose for crisp, clear snapshots. This mode is recommended in most  
situations.  
BAUTO  
Options for white balance and AF mode will be fully available and expo-  
sure compensation can be adjusted manually.  
P
PROGRAM AE  
CNATURAL & N  
DNATURAL LIGHT  
L PORTRAIT  
The camera takes two shots: one without the flash and one with.  
Capture natural lighting under low-light conditions.  
Choose for portraits.  
D BABY MODE  
Choose for natural skin tones when taking portraits of infants.  
The shutter is released automatically when Intelligent Face Detection  
detects a smiling face.  
K SMILE&SHOOT  
MLANDSCAPE  
rPANORAMA  
NSPORT  
Choose for daylight shots of buildings and landscapes.  
Take up to three pictures and join them together to form a panorama.  
Choose when photographing moving subjects.  
O NIGHT  
HNIGHT (TRIPOD)  
Choose this mode for poorly lit twilight or night scenes.  
Choose this mode for slow shutter speeds when shooting at night.  
Slow shutter speeds are used to capture the expanding burst of light  
from a firework.  
P FIREWORKS  
QSUNSET  
Choose this mode to record the vivid colors in sunrises and sunsets.  
More on Photography  
21  
Shooting Mode  
Scene  
Description  
Choose for crisp, clear shots that capture the brightness of scenes domi-  
nated by shining white snow.  
RSNOW  
SBEACH  
U PARTY  
V FLOWER  
WTEXT  
Choose for crisp, clear shots that capture the brightness of sunlit beaches.  
Capture indoor background lighting under low-light conditions.  
Choose for vivid close-ups of flowers.  
Take clear pictures of text or drawings in print.  
22  
More on Photography  
Shooting Mode  
rPANORAMA  
In this mode, you can take up to three pictures and join them together to form  
a panorama. Use of a tripod is recommended to assist in composing overlap-  
ping shots. The camera zooms all the way out and zoom remains fixed at the  
widest angle until shooting is complete.  
Select CAUTO for PPANORAMA MODE in the shooting menu (P61).  
1
2
Press the selector up to select a frame. Press the selector left or right to  
highlight a pan direction and press MENU/OK.  
Take a photograph. Exposure and white balance for the panorama are set  
with the first shot.  
3
4
Frame the next shot to overlap with the previous picture by superimpos-  
ing y on + so that they form a solid circle (z). The camera will release the  
shutter automatically.  
Pan direction  
Display after 1st shot  
Shutter released  
More on Photography  
23  
Shooting Mode  
Take the last shot as described in Step 4.  
5
R To end shooting and create a panorama after the first or second shot, press the  
multi selector up after completing Step 3 or Step 4 and proceed to Step 6.  
Press MENU/OK to save the picture.  
6
R Saving a panorama may take a while.  
Q Panoramas are created from multiple frames. The camera may in some cases be  
unable to stitch the frames together perfectly.  
Q The desired results may not be achieved with moving subjects, subjects close to  
the camera, unvarying subjects such as the sky or a field of grass, subjects that are  
in constant motion, such as waves and waterfalls, or subjects that undergo marked  
changes in brightness. Panoramas may be blurred if the subject is poorly lit.  
For Besst Results  
For best results, be careful not to tilt the camera backward or forward or to either  
side and try not to move the camera while y and + are aligned to form a solid circle.  
Printting PPanoramas  
Depending on the page size and the size of the panorama, panoramas may print  
with their edges cropped out or with wide margins at the top and bottom or at  
both sides.  
24  
More on Photography  
Shooting Mode  
Framing Panoorraammaass MManually  
Follow the steps below if the desired results are not achieved with CAUTO se-  
lected for PPANORAMA MODE:  
Select DMANUAL for PPANORAMA MODE in the shooting menu.  
1
2
3
Select a frame and take the first shot.  
Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take  
the next shot, framing it to overlap with the previous picture.  
Guide  
Display after 1st shot  
Frame next shot  
Repeat Step 3 to take the third shot and then press MENU/OK to display the completed pan-  
orama.  
4
5
Press MENU/OK to save the picture.  
More on Photography  
25  
Focus Lock  
To compose photographs with off-center subjects:  
Focus: Position the subject in the focus frame (U)  
and press the shutter button halfway to lock focus  
and exposure. Focus and exposure will remain locked  
while the shutter button is pressed halfway (AF/AE  
lock).  
1
2
3
Recompose: Keep the button pressed halfway.  
Shoot: Press the button all the way down.  
26  
More on Photography  
Focus Lock  
Autoffocus  
Although the camera boasts a high-precision autofocus system, it may be unable to  
focus on the subjects listed below. If the camera is unable to focus, focus on another  
subject at the same distance and use focus lock to recompose the photograph.  
Very shiny subjects such as mirrors or car bodies.  
Subjects that show little contrast with the background  
Fast-moving subjects.  
(for example, subjects in clothing that is the same color  
Subjects photographed through a window or other re- as the background).  
flective object.  
Subjects positioned in front of or behind a high-contrast  
Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a  
light, such as hair or fur.  
Insubstantial subjects, such as smoke or flame.  
subject photographed against a backdrop of highly con-  
trasting elements).  
More on Photography  
27  
dExposure Coompeenssaation  
To adjust exposure compensation when photo-  
graphing very bright, very dark, or high-contrast  
subjects, press the selector up (d). Press the selec-  
tor up or down to choose an exposure compensa-  
tion value and then press MENU/OK.  
Choose positive (+) values  
to increase exposure  
Choose negative (–) values  
to reduce exposure  
R A dicon and exposure indicator are displayed at settings other than 0. Exposure  
compensation is not reset when the camera is turned off; to restore normal expo-  
sure control, choose a value of 0.  
R Turn the flash off when using exposure compensation.  
R Exposure compensation is available only when P (PROGRAM AE) is selected for  
shooting mode.  
28  
More on Photography  
FMaacroo Mooddee ((CClloossee--uups)  
For close-ups, press the selector left (F) and select  
F. When macro mode is in effect, the camera fo-  
cuses on subjects near the center of the frame. Use  
the zoom buttons to compose pictures (P17).  
To exit macro mode, press the selector left (F) and select  
H.  
R Use of a tripod is recommended to prevent blur caused by camera shake.  
More on Photography  
29  
NUsing the Flash (Intellligenntt Flashh)  
When the flash is used, the camera’s Intelligent Flash system instantly analyzes  
the scene based on such factors as the brightness of the subject, its position  
in the frame, and its distance from the camera. Flash output and sensitivity  
are adjusted to ensure that the main subject is correctly exposed while pre-  
serving the effects of ambient background lighting, even in dimly-lit indoor  
scenes. Use the flash when lighting is poor, for example when shooting at  
night or indoors under low light.  
Press the selector right (N) and choose from the fol-  
lowing flash modes:  
Option  
Description  
AUTO/K  
(AUTO FLASH)  
The flash fires when required. Recommended in most situations.  
N/L  
The flash fires whenever a picture is taken. Use for backlit subjects or for natural  
(FORCED FLASH) coloration when shooting in bright light.  
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is  
(SUPPRESSED FLASH) recommended.  
O/M  
Capture both the main subject and the background under low light (note that  
(SLOW SYNCHRO) brightly lit scenes may be overexposed).  
30  
More on Photography  
NUsing the Flash (Intelligent Flash)  
R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.  
At slow shutter speeds, kwill appear in the display to warn that pictures may be  
blurred; use of a tripod is recommended.  
R The flash may fire several times with each shot. Do not move the camera until  
shooting is complete.  
R The flash may cause vignetting.  
KRED EYE REDUCTION / LFORCED FLASH / MRED EYE & SLOW  
J icon indicates that Intelligent Face Detection and red-eye removal  
are on and will be used to minimize “red-eyecaused by the flash reflect-  
ing from the retinas of portrait subjects.  
More on Photography  
31  
hUsing thee Selff-Timer  
To use the self-timer, press the selector down (h)  
and choose from the following options:  
Option  
T(OFF)  
Description  
Self-timer off.  
The shutter is released ten seconds after the shutter button is pressed. Use for  
self-portraits. The self-timer lamp on the front of the camera blinks while the  
timer counts down.  
S(10 SEC)  
The shutter is released two seconds after the shutter button is pressed. Use to  
reduce blur caused by the camera moving when the shutter-release button is  
pressed. The self-timer lamp will blink as the timer counts down.  
R(2 SEC)  
32  
More on Photography  
bInnttelligent Facce Deteeccttiioonn  
Intelligent Face Detection sets focus and exposure for human faces anywhere  
in the frame, preventing the camera from focusing on the background in  
group portraits. Choose for shots that emphasize portrait subjects.  
To use Intelligent Face Detection, press MENU/OK  
to display the shooting menu and select ON for  
bFACE DETECTION. Faces can be detected with  
the camera in vertical or horizontal orientation; if  
a face is detected, it will be indicated by a green  
border. If there is more than one face in the frame,  
the camera will select the face closest to the center;  
other faces are indicated by white borders.  
Q In some modes, the camera may set exposure for the frame as a whole rather than  
the portrait subject.  
Q If the subject moves as the shutter button is pressed, their face may not be in the  
area indicated by the green border when the picture is taken.  
More on Photography  
33  
nFace Recognnition  
The camera can store information on the face and personal  
details (name, relationship, and birth date) of portrait sub-  
jects and assign these subjects priority for Intelligent Face  
Detection or display their names and other information  
during playback.  
Happy Birthday!  
Adding New Faces  
Follow the steps below to add faces to the face recognition database.  
Select REGISTER.  
Select REGISTER for nFACE RECOGNITION in the shooting menu.  
1
R To disable face recognition, select OFF.  
Take a photograph.  
After checking that the subject is facing the camera,  
2
frame the subject using the guides and take the pho-  
tograph.  
R If an error is displayed, take the photograph again.  
34  
More on Photography  
nFace Recognition  
Enter face recognition data  
Press MENU/OK to display face recognition data and enter the following in-  
3
formation:  
NAME: Enter a name of up to 14 characters and press MENU/OK.  
BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.  
CATEGORY: Choose the option that describes your relationship to the sub-  
ject and press MENU/OK.  
R If you attempt to zoom in on the face of a person indicated by a green border  
in the face recognition database on their birthday, the camera will display their  
name and the messageHappy Birthday!”  
R If DBABY MODE is selected in the shooting mode and Intelligent Face Detec-  
tion is on, the camera will display the age of a 3 year old or younger child.  
More on Photography  
35  
nFace Recognition  
Viewing, Editing, and Deleting Existing Data  
Follow the steps below to view, edit, or delete face recognition data.  
Select VIEW & EDIT for nFACE RECOGNITION.  
1
2
3
Select a face.  
View or edit face recognition data.  
The name, category, or birth date can be edited as described in Step 3 of  
“Adding New Faces”(P34). To retake the photo, select REPLACING IMAGE  
and shoot a new portrait as described above.  
R To delete face recognition data for the selected subject, select ERASE.  
Adding Faces Automatically  
To automatically add frequently-photographed subjects to the face recogni-  
tion database, select ON for AUTO REGISTRATION in the face recognition  
menu. If the camera detects a face that has been photographed many times  
without being added to the database, it will display a message prompting you  
to create a new face recognition entry. Press MENU/OK and enter face recogni-  
tion data.  
R The camera may sometimes fail to recognize new faces automatically. If necessary,  
faces can be added manually using the REGISTER option.  
36  
More on Photography  
nFace Recognition  
Face Recognition  
The camera can store up to eight faces. If you attempt to add a ninth face, a confir-  
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by  
deleting existing data. AUTO REGISTRATION is disabled if there are already data for  
eight faces.  
WhenIntelligentFaceDetection(P33)isonandtheframecontainsmultiplesubjects  
from the face recognition database, the camera displays the name of the subject  
that will be used to set focus and exposure (the subject shown by the green frame).  
If no name is entered, the camera will show “---. Subjects identified using face rec-  
ognition but not used to set focus and exposure are shown by orange frames, other  
subjects by white frames.  
Q nFACE RECOGNITION may not function in the following:  
- the subject does not face front.  
- the face is not positioned within a frame.  
- the feature of the face varies (because of age or expression).  
- the subject is in back-lit or poorly light.  
More on Photography  
37  
More on Playback  
Playback OOpptions  
To view the most recent picture in the LCD monitor, press the abutton.  
Press the selector right to view pictures in the order recorded, left to view  
pictures in reverse order. Keep the selector pressed to scroll rapidly to the  
desired frame.  
R Pictures taken using other cameras are indicated by a m(“gift image”) icon during  
playback.  
IFavorites: Rating Pictures  
To rate the picture currently displayed in full-frame playback, press DISP/BACK  
and press the selector up and down to select from zero to five stars.  
38  
Playback Options  
Playback Zoom  
Press T to zoom in on pictures displayed in single-frame playback; press W to  
zoom out. When the picture is zoomed in, the selector can be used to view  
areas of the image not currently visible in the display.  
Zoom indicator  
Navigation window shows  
portion of image currently  
displayed in LCD monitor  
Press DISP/BACK to exit zoom.  
R The maximum zoom ratio varies with image size. Playback zoom is not available  
with cropped or resized copies saved at a size of a or smaller.  
More on Playback  
39  
Playback Options  
Multi-Frame Playback  
Pressing W when a picture is shown full-frame in the LCD monitor displays the  
current image with previous and following images in the background. Press  
W to increase the number of images displayed to two, nine, or one hundred,  
T to view fewer images.  
When two or more images are displayed, use the selector to highlight images  
and press MENU/OK to view the highlighted image full frame. In the nine- and  
hundred-frame displays, use the selector to view more pictures.  
40  
More on Playback  
ADeleting Pictures  
To delete individual pictures, multiple selected  
pictures, or all pictures, press MENU/OK, select  
AERASE (P67), and choose from the options  
below. Note that deleted pictures can not be re-  
covered. Copy important pictures to a computer or other storage device be-  
fore proceeding.  
Option  
Description  
Press the selector left or right to scroll through pictures and press MENU/OK  
to delete the current picture (a confirmation dialog is not displayed).  
FRAME  
Highlight pictures and press MENU/OK to select or deselect (pictures that  
are protected or in a print order are shown by S). When the operation is  
complete, press DISP/BACK to display a confirmation dialog, then highlight  
OK and press MENU/OK to delete the selected pictures.  
A confirmation dialog will be displayed; highlight OK and press MENU/OK to  
delete all unprotected pictures. Pressing DISP/BACK cancels deletion; note  
that any pictures deleted before the button was pressed can not be re-  
covered.  
SELECTED FRAMES  
ALL FRAMES  
R Protected pictures can not be deleted. Remove protection from any pictures you  
wish to delete (P71).  
R If a message appears stating that the selected images are part of a DPOF print order,  
press MENU/OK to delete the pictures.  
More on Playback  
41  
bImmaage SSearch  
Search for pictures.  
Select bIMAGE SEARCH in the playback menu (P67), highlight one of  
the following search criteria, and press MENU/OK:  
BY DATE: Search by date.  
1
BY FACE: Search for faces from the face recognition database.  
BY IFAVORITES: Search by rating.  
BY SCENE: Search by scene.  
BY TYPE OF DATA: Find all still pictures or all movies.  
BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-  
nation.  
Select a search condition. Only pictures that match the search condition  
will be displayed. To delete or protect selected pictures or to view the  
search results in a slide show, press MENU/OK and choose AERASE (P41),  
DPROTECT (P71), or ISLIDE SHOW (P70).  
2
42  
More on Playback  
kPhotooBBoook Assist  
Create books from your favorite photos.  
Creating a PhotoBook  
Select NEW BOOK for kPHOTOBOOK ASSIST in the playback menu  
(P67) and choose from the following options:  
1
SELECT FROM ALL: Choose from all available pictures.  
SELECT BY IMAGE SEARCH: Choose from pictures matching selected search  
conditions (P42).  
R Neither photographs a or smaller nor movies can be selected for photobooks.  
Scroll through the images and press the selector up to select or deselect.  
To display the current image on the cover, press the selector down. Press  
MENU/OK to exit when the book is complete.  
2
3
R The first picture selected becomes the cover image. Press the selector down to  
select a different image for the cover.  
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-  
ing the specified search conditions for the book, choose SELECT ALL). The  
new book will be added to the list in the photobook assist menu.  
Q Books can contain up to 300 pictures.  
Q Books that contain no photos are automatically deleted.  
More on Playback  
43  
kPhotoBook Assist  
Viewing Photobooks  
Highlight a book in the photobook assist menu and press MENU/OK to display  
the book, then press the selector left or right to scroll through the pictures.  
Editing and Deleting Photobooks  
Display the photobook and press MENU/OK. The following options will be dis-  
played; select the desired option and follow the on-screen instructions.  
EDIT: Edit the book as described inCreating a PhotoBook(P43).  
ERASE: Delete the book.  
Photoobooks  
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-  
ware.  
44  
More on Playback  
Viewing Panoramas  
If you press the selector down when a panorama is displayed full frame, the  
camera will play back the picture from left to right. To pause playback, press  
the selector down; press the selector down again to resume. To delete the  
panorama, press the selector up (b) when playback is paused. To exit to full-  
frame playback, press the selector up while panorama playback is in progress.  
More on Playback  
45  
Movies  
Recordiinngg MMoviess  
Press t to shoot a movie. During recording,  
yREC and the time remaining will be displayed  
in the LCD monitor and sound will be recorded via  
the built-in microphone (be careful not to cover the  
microphone during recording).  
Time available is displayed  
in monitor  
To end recording, press the tbutton again. Recording ends automatically  
when the movie reaches maximum length or memory is full.  
Zoooomm aadjustment  
Zoom can be adjusted while recording is in progress. Select the type of zoom avail-  
able for pMOVIE ZOOM TYPE in the setup menu. Selecting 2OPTICAL blocks  
sound being recorded when zooming.  
46  
Recording Movies  
R Before recording, select a frame size using the WMOVIE MODE option in the  
shooting menu. Select h1280 (1280×720) for an aspect ratio of 16:9 (High Defi-  
nition), f (640×480) to record standard definition movies, or g (320×240) for  
longer movies.  
R Focus, exposure, and white balance are adjusted automatically throughout record-  
ing. The color and brightness of the image may vary from that displayed before  
recording begins.  
R Sounds made by the camera may be recorded.  
Q Do not open the battery-chamber cover during shooting or saving a movie on a  
memory card. Failure to observe this precaution could prevent the movie from  
being played back.  
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.  
This is normal and does not indicate a malfunction.  
Q The temperature of the camera may rise if it is used to record movies for an ex-  
tended period or if the ambient temperature is high. This is normal and does not  
indicate a malfunction.  
Movies  
47  
Viewing Movvies  
100-006  
During playback, movies are displayed in the LCD monitor  
as shown at right. The following operations can be per-  
formed while a movie is displayed:  
PLAY  
Option  
Description  
Start/pause Press the selector down to start playback. Press again to  
playback pause.  
End playback/ Press the selector up to end playback. If playback is not in  
delete  
progress, pressing the selector up will delete the movie.  
Press the selector right to advance, left to rewind. If playback  
is paused, the movie will advance or rewind one frame  
each time the selector is pressed.  
Advance/  
rewind  
Press MENU/OK to pause playback and display volume con-  
trols. Press the selector up or down to adjust the volume  
and press MENU/OK to exit. Volume can also be adjusted  
from the setup menu.  
Adjust volume  
Q Do not cover the speaker during playback.  
48  
Movies  
Connections  
Viewing Pictures on TV  
Connect the camera to a TV to show pictures to a group.  
Turn the camera off and connect an optional A/V cable as shown below.  
1
Connect yellow plug  
to video-in jack  
Insert into  
USB multi-connector  
Connect white  
plug to audio-in jack  
Q When connecting cables, be sure the connectors are fully inserted.  
R Image quality may drop during movie playback.  
R To view high definition movies on a high definition TV, the optional accessory  
is required (P82, 83).  
Tune the television to the video input channel. See the documentation  
supplied with the television for details.  
2
Press the abutton for about a second to turn the camera on. The camera  
3
monitor turns off and pictures and movies are played back on the TV. Note  
that the camera volume controls have no effect on sounds played on the  
TV; use the television volume controls to adjust the volume.  
49  
Printing Pictures via USB  
If the printer supports PictBridge, the camera can be connected  
directly to the printer as shown below and pictures can be printed  
without first being copied to a computer. Note that depending on  
the printer, not all the functions described below may be supported.  
Connect the supplied USB cable as shown and turn the printer on.  
1
Turn the camera on.  
2
Press the selector left or right to display a picture you wish to print.  
3
Press the selector up or down to choose the number of copies (up to 99).  
4
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a  
confirmation dialog when settings are complete.  
5
50  
Connections  
Printing Pictures via USB  
Press MENU/OK to start printing. Printing can be interrupted by pressing  
DISP/BACK, but note that some printers may not respond immediately. If the  
printer stops before printing is complete, turn the camera off and then on  
again.  
6
7
After confirming that PRINTING has cleared from the camera display, turn  
the camera off and disconnect the USB cable.  
R Pictures can be printed from a memory card that has been formatted in the camera.  
R If no pictures are selected, the camera will print one copy of the current picture.  
R Page size, print quality, and border selections are made using the printer.  
Printinng thee DDaattee ooff RReecoorrding  
To print the date of recording on pictures, press DISP/BACK in the PictBridge display  
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without  
the date of recording, select PRINT WITHOUT DATE).  
Connections  
51  
Printing Pictures via USB  
Printing the DPOF Print Order  
The KPRINT ORDER (DPOF) option in the playback menu can be used to  
create a digital “print order” for PictBridge-compatible printers (P82) or de-  
vices that support DPOF.  
DPOF  
DPOF (Digital Print Order Format) is a standard that allows pictures to be  
printed from “print orders” stored on a memory card. The information in  
the order includes the pictures to be printed and the number of copies of  
each picture.  
Select playback mode and press MENU/OK to display the playback menu.  
1
2
3
Highlight KPRINT ORDER (DPOF) and press MENU/OK.  
Highlight one of the following options and press MENU/OK:  
WITH DATE s: Print the date of recording on pictures.  
WITHOUT DATE: Do not print the date of recording on pictures.  
R Some printers do not support date printing. See the printer manual for details.  
Press the selector left or right to display a picture you wish to add to or  
remove from the print order.  
4
52  
Connections  
Printing Pictures via USB  
Press the selector up or down to choose the number of copies (up to 99).  
To remove a picture from the print order, press the selector down until the  
number of copies is zero.  
5
Repeat Steps 4–5 to complete the print order and press MENU/OK when  
settings are complete.  
6
7
A confirmation dialog will be displayed. Press MENU/OK to save the print  
order.  
R Print orders can contain a maximum of 999 pictures.  
R If a memory card is inserted containing a print order created by another camera,  
a message will be displayed. Create a new print order as described above.  
Connections  
53  
Viewingg Picturreess oonn aa CCoommppuutter  
The supplied software can be used to copy pictures to a computer, where  
they can be stored, viewed, organized, and printed. Before proceeding, install  
the software as described below. Do NOT connect the camera to the computer  
until installation is complete.  
Windows: Installing MyFinePix Studio  
Confirm that the computer meets the following system requirements:  
1
Windowws 7 (SP 1)/Windowss VViisstta (SP 2)1  
Windowws XP (SP 3)1  
3GHz Pentium 4 or better  
2GHz Pentium 4 or better  
CPU  
(2.4GHz Core 2 Duo or better)2  
(2.4GHz Core 2 Duo or better)2  
512MB or more  
RAM  
Free disk space  
GPU  
1GB or more  
(1GB or more)2  
2GB or more  
Supports DirectX 9 or later  
Supports DirectX 7 or later  
(requiired;; pperforrmance not guaranteeed withh otheerr GPUss)  
(recommended)  
Video  
• 1024×768 pixels or more with 24-bit color or better  
• Built-in USB port recommended. Operation is not guaranteed with other  
USB ports.  
• Internet connection (broadband recommended) required to install  
.NET Framework (if necessary), to use auto update feature, and when per-  
forming such tasks as sharing pictures on-line or via e-mail.  
• Installation of .Net Framework 3.5 SP1 required to use upload picture feature  
and MapViewer.  
Other  
1 Other versions of Windows are not supported. Only pre-installed operating systems are  
supported; operation is not guaranteed on home-built computers or computers that have  
been upgraded from earlier versions of Windows.  
2 Recommended when displaying HD movies.  
Start the computer. Log in to an account with administrator privileges  
before proceeding.  
2
54  
Connections  
Viewing Pictures on a Computer  
Exit any applications that may be running and insert the installer CD in a  
CD-ROM drive.  
3
Windoows 7/Wiindows Vista  
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”  
dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).  
The installer will start automatically; click Install MyFinePix Studio and  
follow the on-screen instructions to install MyFinePix Studio.  
If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly  
If the installer does not start automatically, select Computer or My Computer  
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX  
CD window and double-click setup or SETUP.EXE.  
If prompted to install Windows Media Player or DirectX, follow the on-  
screen instructions to complete installation.  
4
5
Remove the installer CD from the CD-ROM drive when installation is com-  
plete. Store the installer CD in a dry location out of direct sunlight in case  
you need to re-install the software.  
Installation is now complete. Proceed toConnecting the Camera(P58).  
Connections  
55  
Viewing Pictures on a Computer  
Macintosh: Installing FinePixViewer  
Confirm that the computer meets the following system requirements:  
1
CPU  
PowerPC or Intel (Core 2 Duo or better)*  
Pre-installed copies of Mac OS X version 10.3.9–10.6. Mac OS X 10.7 is  
not supported. (visit http://www.fujifilm.com/support/digital_cameras/  
compatibility/ for more information)  
OS  
RAM  
Free disk space  
Video  
256MB or more (1GB or more)*  
A minimum of 200MB required for installation with 400MB available when  
FinePixViewer is running  
800×600 pixels or more with thousands of colors or better  
Built-in USB port recommended. Operation is not guaranteed with other USB  
ports.  
Other  
* Recommended when displaying HD movies.  
After starting the computer and quitting any applications that may be run-  
ning, insert the installer CD in a CD-ROM drive and double-click Installer  
for Mac OS X.  
2
3
An installer dialog will be displayed; click Installing FinePixViewer to start  
installation. Enter an administrator name and password when prompted  
and click OK, then follow the on-screen instructions to install FinePixViewer.  
Click Exit to quit the installer when installation is complete.  
56  
Connections  
Viewing Pictures on a Computer  
Remove the installer CD from the CD-ROM drive. Note that you may be  
unable to remove the CD if Safari is running; if necessary, quit Safari before  
removing the CD. Store the installer CD in a dry location out of direct sun-  
light in case you need to re-install the software.  
4
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,  
and select Preferences… from the Image Capture application menu. The  
Image Capture preferences dialog will be displayed; choose Other… in the  
When a camera is connected, open menu, then select FPVBridge in the  
“Applications/FinePixViewerfolder and click Open. Quit Image Capture.  
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”  
folder and start Image Capture. The camera will be listed under DEVICES;  
select the camera and choose FPVBridge from the Connecting this cam-  
era opens menu and click Choose. Quit Image Capture.  
Installation is now complete. Proceed toConnecting the Camera(P58).  
Connections  
57  
Viewing Pictures on a Computer  
Connecting the Camera  
If the pictures you wish to copy are stored on a memory card, insert the  
card into the camera.  
1
R Windows users may require the Windows CD when starting the software for  
the first time.  
Q Loss of power during transfer could result in loss of data or damage to the mem-  
ory card. Charge the battery before connecting the camera.  
Turn the camera off and connect the  
2
supplied USB cable as shown, mak-  
ing sure the connectors are fully in-  
serted. Connect the camera directly  
to the computer; do not use a USB  
hub or keyboard.  
Press the abutton for about a second to turn the camera on. After start-  
3
ing MyFinePix Studio or FinePixViewer, follow the on-screen instructions  
to copy pictures to the computer. To exit without copying pictures, click  
Cancel.  
58  
Connections  
Viewing Pictures on a Computer  
For more information on using the supplied software, start the application  
and select the appropriate option from the Help menu.  
Q If a memory card containing a large number of images is inserted, there may be a  
delay before the software starts and you may be unable to import or save images.  
Use a memory card reader to transfer pictures.  
Q Make sure that the computer does not display a message stating that copying is in  
progress before turning the camera off or disconnecting the USB cable. Failure to  
observe this precaution could result in loss of data or damage to the memory card.  
Q Disconnect the camera before inserting or removing memory cards.  
Q In some cases, it may not be possible to access pictures saved to a network server  
using the supplied software in the same way as on a standalone computer.  
Q The user bears all applicable fees charged by the phone company or Internet ser-  
vice provider when using services that require an Internet connection.  
Connections  
59  
Viewing Pictures on a Computer  
Uninstalling the Supplied Softtwwaarree  
Only uninstall the supplied software when it is no longer required or before begin-  
ning reinstallation. After quitting the software and disconnecting the camera, drag  
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash  
in the Finder menu (Macintosh), or open the control panel and use “Programs and  
Features(Windows 7/Windows Vista) orAdd or Remove Programs(Windows XP) to  
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may  
be displayed; read the contents carefully before clicking OK.  
60  
Connections  
Menus  
Using the MMenus: Shhoooottiinngg MMode  
Using the Shooting Menu  
To display the shooting menu, press MENU/OK in  
shooting mode. Highlight items and press the se-  
lector right to view options, then highlight an op-  
tion and press MENU/OK. Press DISP/BACK to exit when  
settings are complete. The options available vary with the shooting mode  
selected.  
Shooting Menu Options  
ASHOOTIING MODE  
(defaults to Q)  
Choose a shooting mode according to the type of subject (P20).  
NISO  
(defaults to AUTO)  
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-  
tling may appear in pictures taken at high sensitivities.  
100  
Bright  
ISO  
Scene  
3200  
Dark  
Less noticeable  
Nooiissee ((mmottling)  
More noticeable  
Option  
Description  
AUTO  
Sensitivity is adjusted automatically in response to shooting conditions.  
3200 / 1600 / 800 / 400 /  
200 / 100  
Sensitivity is set to the specified value, which is shown in the display.  
61  
Using the Menus: Shooting Mode  
OIMAGE SIZE  
(defaults to O 4:3)  
Choose the image size and aspect ratio at which pictures are record-  
ed. Large pictures can be printed at large sizes with no drop in quality,  
while small pictures require less memory, allowing more pictures to be  
recorded.  
O4 : 3  
Size Aspect ratio  
Size Versus Aspect Ratio  
Size  
Option  
O
Prints at sizes up to  
34×25cm (13.5×10in.)  
P
24×18cm (9.5×7in.)  
17×13cm (7×5in.)  
Q
Aspect ratio  
4 : 3: Pictures have the same  
proportions as the camera  
display.  
3 : 2: Pictures have the same 16 : 9: Suited for display on  
proportions as a frame of  
35mm film.  
High Definition (HD) devices.  
3
2
9
4
3
16  
62  
Menus  
Using the Menus: Shooting Mode  
TIMAGE QUALITY  
(defaults to N)  
Choose how much image files are compressed.  
Option  
Description  
FINE  
Low compression. Select for higher image quality.  
NORMAL  
High compression. Select this option to store more pictures.  
PFINEPIX COLOR  
(defaults to c)  
Enhance contrast and color saturation or take pictures in black and white.  
Option  
Description  
cSTANDARD  
Standard contrast and saturation. Recommended in most situations.  
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens  
and blues in landscapes.  
aCHROME  
bB&W  
Take pictures in black and white.  
R Seettttiinnggs otheer thann cSTANDARD arree showwnn bbyy aann iiccoonn iinn tthe LCD monitor.  
R Depending on the subject, the effects of aCHROME may not be visible in the LCD mmoonniittoorr..  
Menus  
63  
Using the Menus: Shooting Mode  
DWHITE BAALLANCE  
(defaults to AUTO)  
For natural colors, choose a setting that matches the light source.  
Option  
AUTO  
i
Description  
White balance adjusted automatically.  
For subjects in direct sunlight.  
j
For subjects in the shade.  
k
Use underdaylightuorescent lights.  
Use underwarm whiteuorescent lights.  
Use undercool whiteuorescent lights.  
Use under incandescent lighting.  
l
m
n
R Reessuullttss vvaarryy wwiitthh sshhooting coonditionnss. Play picctures back after shooting to check ccoolloorrss iinn  
the LCD monitor.  
RCONTINUOUS  
(defaults to OFF)  
Capture motion in a series of pictures.  
Option  
Description  
ITOP 3 The camera takes up to 3 pictures while the shutter button is pressed.  
OFF One photograph is taken each time the shutter button is pressed.  
R Focuss and expposuree aare deteermineed by the first frame in each series.  
R Thhee flash turns off automatiicallly. Thhee pprreeviouslly selecteed flassh moddee is resstoreed when OFF is  
selected for RCONTINUOUS.  
R Frame rate varies with shutter speed.  
R Thhee nnuummbbeerr of pictures that can be recorded depends on tthe memoory avaiilable.  
64  
Menus  
Using the Menus: Shooting Mode  
bFACE DETECTION  
Choose whether the camera automatically detects and sets focus and exposure for human por-  
trait subjects (P33).  
FAF MODE  
This option controls how the camera selects the focus area. Regardless of the option selected,  
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.  
Option  
Description  
rCENTER  
The camera focuses on the subject in the center of the frame.  
Position the subject in the center focus area and press the selector left. Focus will  
track the subject as it moves through the frame.  
xTRACKING  
R Note thaat in xmodee, the caamera focuses continuously, increasing the drain on the batteries,  
and that the sound of the camera focusing may be audible.  
nFACE RECOGNITION  
Add portrait subjects to the face recognition database. These subjects will be given priority  
during Intelligent Face Detection, and their names and other information can be viewed during  
playback (P34).  
PPANORAAMA MODE  
(defaults to C)  
Choose how panoramas are framed (P23).  
Menus  
65  
Using the Menus: Shooting Mode  
FMOVIE AF MODE  
(defaults to r)  
This option controls how the camera selects the focus area for movies.  
Option  
rCENTER  
Description  
The camera focuses on the subject in the center of the frame.  
The camera continuously adjusts focus to reflect changes in the distance to  
the subject in the focus frame.  
uCONTINUOUS  
R Note that in umode, the camera focuses continuously, increasing the drain on the bbaatttteerryy,,  
and that the sound of the camera focusing may be audible.  
WMOVIE MODE  
(defaults to h)  
Choose a frame size for movies (P47).  
66  
Menus  
Using the MMenus: Playbbaacckk MMode  
Using the Playback Menu  
To display the playback menu, press MENU/OK in  
playback mode. Highlight items and press the  
selector right to view options, then highlight an  
option and press MENU/OK. Press DISP/BACK to exit  
when settings are complete.  
Playback Menu Options  
kPHOTOBOOK ASSIST  
Create books from your favorite photos (P43).  
bIMAGE SEARCH  
Search for pictures (P42).  
AERASE  
Delete all or selected pictures (P41).  
Menus  
67  
Using the Menus: Playback Mode  
iMOVIE EDIT  
Edit movies.  
MOVIE TRIMMING  
Remove opening or ending footage to create an edited copy of the current movie.  
Display the desired movie.  
1
Select iMOVIE EDIT in the playback menu, then select MOVIE TRIMMING. To remove  
footage from the start of the copy, proceed to Step 3; otherwise, proceed to Step 4.  
2
3
4
5
6
Press the selector down to begin playback and press it down again when the new opening  
frame is reached.  
Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,  
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).  
Press the selector down to begin playback and press it down again when the new closing  
frame is reached.  
Press MENU/OK to save the copy.  
MOVIE JOIN  
Add existing footage to the end of the current movie to create an edited copy.  
Display the desired movie.  
1
Select iMOVIE EDIT in the playback menu, then select MOVIE JOIN.  
2
3
4
Press the selector left or right to highlight a movie.  
Press MENU/OK to add the highlighted footage to the end of the current movie and save the  
resulting copy, or press DISP/BACK to exit without creating a copy.  
R Both mmoovies must have been recorded at thhe same ffrrame sizee and fraamme rate annd have a  
combined file size of no more than 2 GB.  
68  
Menus  
Using the Menus: Playback Mode  
jMARK FOR UPLOAD TO  
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).  
Selecting Pictures for Upload  
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and  
movies for upload to Facebook.  
1
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press  
DISP/BACK to exit when all the desired pictures are selected.  
2
R Only movviieess ccaann bbee sseelleected for upload to YouTube.  
R During pllayback,, selecteed pictuurres arree iinnddiiccaatteedd bby jYouTube or jFACEBOOK icons.  
RESET ALL: Deselecting All Pictures  
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a  
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the  
operation is complete.  
Uploading Pictures (Windows Only)  
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix  
Studio.  
Select with camera  
Upload from computer  
For information on installing MyFinePix Studio and connecting the camera to a computer, see  
“Viewing Pictures on a Computer(P54).  
Menus  
69  
Using the Menus: Playback Mode  
ISLIDEE SHOW  
(defaults to MULTIPLE)  
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.  
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at  
any time by pressing MENU/OK.  
Option  
NORMAL  
Description  
Press selector left or right to go back or skip ahead one frame. Select FADE-IN  
for fade transitions between frames.  
FADE-IN  
NORMAL g  
FADE-IN g  
MULTIPLE  
As above, except that camera automatically zooms in on faces selected with  
Intelligent Face detection.  
Display several pictures at once.  
R Thhee ccaammeerraa will not turn off autoomaticaally whiile a sliide show is in progress.  
BRED EYE RREMOVAL  
If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face  
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-  
eye is detected, the image will be processed to create a copy with reduced red-eye.  
Display the desired picture.  
1
Select BRED EYE REMOVAL in the playback menu.  
2
3
Press MENU/OK.  
R Reedd eeyyee mmaayy nnoott bbee rreemmooved if the camera is uunnaabbllee ttoo ddeetteecctt aa ffaaccee oorr tthhee ffaaccee iiss iinn pprroollee..  
Reessuullttss mmay differ depending on the scceennee.. RRed eeyyee ccaann nnoott bbee rreemoved from piccttuurreess tthhaatt  
have already been processed using red--eeye remmovvaall oorr ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess..  
R Thhee aammoouunntt ooff ttiimmee nneeeeddeedd ttoo pprroocceessss tthhee iimmaaggee vvaarriieess wwiitthh tthhee nnuummbbeerr ooff ffaacceess ddeetteecctteedd..  
R Copies created with BREDD EYE REMMOVAL arre indiccatedd bby a eicon during playback.  
70  
Menus  
Using the Menus: Playback Mode  
DPROTECT  
Protect pictures from accidental deletion.  
Select DPROTECT in the playback menu.  
1
2
Highlight one of the following options and press MENU/OK:  
FRAME: Protect selected pictures. Press the selector left or right to view pictures and press  
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.  
SET ALL: Protect all pictures.  
RESET ALL: Remove protection from all pictures.  
Q Protected pictures will be deleted when the memory card is formatted (P76).  
GCROP  
Create a cropped copy of the current picture.  
Display the desired picture.  
1
Select GCROP in the playback menu.  
2
3
Use the zoom buttons to zoom in and out and use the selector to scroll the picture until the  
desired portion is displayed.  
Press MENU/OK to display a confirmation dialog.  
4
5
Press MENU/OK again to save the cropped copy to a separate file.  
R Larger crops produce larger copies; all copies have an aspect ratio of 4:3. IIff tthhee ssiizzee ooff tthhee nnaall  
copyy wwill be a, OK will be diisplayed iinn yyeelllloow.  
Menus  
71  
Using the Menus: Playback Mode  
ORESIZE  
Create a small copy of the current picture.  
Display the desired picture.  
1
Select ORESIZE in the playback menu.  
2
3
4
Highlight a size and press MENU/OK to display a confirmation dialog.  
Press MENU/OK to save the resized copy to a separate file.  
R Thhee ssiizzeess aavailable vary with the size of the originnal image.  
CIMAGE ROTATE  
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD  
monitor.  
Display the desired picture.  
1
Select CIMAGE ROTATE in the playback menu.  
2
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-  
wise.  
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it  
is played back on the camera.  
4
R Protected pictures can not be rotated. Reemmoove protection before rotating pictures (P71).  
R Thhee ccaammeerraa mmaayy nnoott bbee aabbllee ttoo rroottaattee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevices.  
72  
Menus  
Using the Menus: Playback Mode  
iERASE FACE RECOG.  
Remove face recognition links from the current image. When this option is selected, the cam-  
era will zoom in on an area in the current picture that it has matched with a face in the face  
recognition database. If the match is not correct, press MENU/OK to remove the link to the face  
recognition database.  
R Face reccognitiion linkks can nott be remooved from copies with a size oof a or smaller.  
KPRINT ORDER (DPOF)  
Select pictures for printing on DPOF- and PictBridge-compatible devices (P52).  
Menus  
73  
The Setup MMenu  
Using the Setup Menu  
Display the setup menu.  
1.1 Press MENU/OK to display the menu for the cur-  
1
rent mode.  
1.2 Press the selector left to highlight the tab for the current menu.  
1.3 Press the selector down to highlight X.  
Tab  
1.4 Press the selector right to place the cursor in the setup menu.  
Adjust settings.  
2
Highlight items and press the selector right to view options, then high-  
light an option and press MENU/OK. Press DISP/BACK to exit when settings  
are complete.  
74  
Menus  
The Setup Menu  
Setup Menu Options  
FDATE/TIME  
Set the camera clock (P15).  
NTIME DIFFERENCE  
(defaults to h)  
Switch the camera clock instantly from your home time zone to the local time at your destina-  
tion when traveling. To specify the difference between local time and your home time zone:  
Highlight g LOCAL and press the selector right.  
Use the selector to choose the time difference between local time and your home time zone.  
Press MENU/OK.  
1
2
3
To switch between local time and your home time zone, highlight g LOCAL or h HOME and  
press MENU/OK.  
Option  
Description  
hHOME  
Switch to the time currently selected for FDATE/TIME (see above).  
Switch to local time. If this option is selected, g and the time and date will  
be displayed in yellow for three seconds each time the camera is turned on.  
gLOCAL  
La  
(defaults to ENGLISH)  
Choose a language (P102).  
oSILENT MODE  
(defaults to OFF)  
Select ON to disable the speaker and flash in situations in which camera sounds or lights may be  
unwelcome (note that the flash will still fire in Cmode).  
Menus  
75  
The Setup Menu  
RRESET  
Reset all settings except FDATE/TIME, NTIME DIFFERENCE, OBACKGROUND COLOR,  
and QVIDEO SYSTEM to default values.  
Highlight RRESET and press the selector right to display a confirmation dialog.  
1
2
Highlight OK and press MENU/OK.  
KFORMAT  
This option will format the memory card.  
Q All data—including protected pictures—will be deleted from the mmeemmoorryy ccaarrdd.. BBe sure im-  
portant files have been copied to a compuutteerr oorr ootthheerr ssttoorraaggee ddeevice.  
Q Do nott open tthe baattteryy--chambber cover during formatting.  
AIMAGE DISP.  
(defaults to 1.5 SEC)  
Choose how long pictures are displayed in the LCD monitor after shooting.  
Option  
3 SEC  
Description  
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).  
Colors may differ slightly from those in the final image.  
1.5 SEC  
ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.  
OFF  
Pictures are not displayed after shooting.  
R OFF has no effect in continuous shooting mode.  
76  
Menus  
The Setup Menu  
BFRAME NO.  
(defaults to CONT.)  
New pictures are stored in image files named using a four-digit file  
number assigned by adding one to the last file number used. The file  
number is displayed during playback as shown at right. BFRAME NO.  
controls whether file numbering is reset to 0001 when a new memory Directory  
card is inserted or the current memory card is formatted.  
number  
Frame number  
100-0001  
File  
number  
Option  
Description  
Numbering continues from the last file number used or the first available  
file number, whichever is higher. Choose this option to reduce the num-  
ber of pictures with duplicate file names.  
CONTINUOUS  
Numbering is reset to 0001 after formatting or when a new memory card  
is inserted.  
RENEW  
R If the frame number reaches 999-9999, the shutter release will be disabled (P93).  
R Seelleecctting RRESET (P76) sets BFRAAME NO. to CONTINUOUS but does not reset the file  
number.  
R Frame numbers for pictures taken with other cameras may differ.  
GOPERATTION VOL.  
(defaults to c)  
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF  
(mute) to disable control sounds.  
HSHUTTEER VOLUME  
(defaults to c)  
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)  
to disable the shutter sound.  
Menus  
77  
The Setup Menu  
eSHUTTER SOUND  
Choose the sound made by the shutter.  
(defaults to i)  
(defaults to 7)  
(defaults to 0)  
IPLAAYYBBAACCKK VVOLUME  
Adjust the volume for movie playback.  
JLCD BRIGHTNESS  
Control the brightness of the display.  
R When a shootting mode opttion otherr than P (PROGGRRAM AE)) is seelected, ddisplay brighhtness is  
automatically adjusted during shooting regardless of a option sseelleecctteedd ffoorr JLCD BRIGHT-  
NESS in response to ambient lighting conditions.  
ELCD MODE  
(defaults to UON)  
Choose whether the display automatically dims to save power.  
MAUTO PPOWER OFF  
(defaults to 2 MIN)  
Choose the length of time before the camera turns off automatically when no operations are  
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned  
off manually. Note that in some situations the camera turns off automatically even when OFF is  
selected.  
LDUAL IS MODE  
(defaults to l)  
Choose from the following image stabilization options:  
Option  
Description  
l CONTINUOUS  
m SHOOTING ONLY  
OFF  
Image stabilization on.  
As above, except that image stabilization is performed only when  
the shutter button is pressed halfway or the shutter is released.  
Image stabilization off. Choose this option when using a tripod.  
78  
Menus  
The Setup Menu  
BRED EYE RREMOVAL  
(defaults to ON)  
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face  
Detection.  
R Reedd--eeyyee rreedduuccttiioonn iiss ppeerfoormed oonly when a face iss ddeetteecctteedd..  
mBLINK DETECTION  
(defaults to ON)  
Choose ON to activate blink detection. If an option other than OFF is selected for AIMAGE  
DISP. (P76), a warning will be displayed if the camera detects subjects who may have blinked  
when the picture was taken. If ZOOM (CONTINUOUS) is selected, you can press the fbutton  
to zoom in on these subjects.  
R Blink deetecttiion is nnot peerformed iff the ccamerraa failss to deetect a facee or whhen OFF iis selected  
for AIMAGE DISP..  
Menus  
79  
The Setup Menu  
DDIGITAL ZOOM  
(defaults to OFF)  
If ON is selected, pressing T button at the maximum optical zoom position will trigger digital  
zoom, further magnifying the image.  
Thhe Zoooomm IInnddicattoor  
W
W
T
DIGITAL ZOOM on  
Optical zoom  
Optical zoom  
Digital zoom  
T
DIGITAL ZOOM off  
Q Digital zooom prrooducess lower quality images than optical zoom.  
R Digital zoom can not be used when shooting in Qmode.  
pMOVIE ZOOM TYPE  
(defaults to 1)  
Choose the zoom type when recording movies.  
R Digital zooom prrooducess lower quality images than optical zoom.  
R Optical zoom blocks sound being recorded when zooming.  
nSAVE ORG IMAGE  
(defaults to OFF)  
Select ON to save unprocessed copies of pictures taken with red-eye removal.  
80  
Menus  
The Setup Menu  
OBACKGROUNND COLOORR  
Choose a color scheme.  
cGUIDANCE DISPPLLAY  
(defaults to ON)  
Choose whether to display tool tips.  
QVIDEO SYSTEM  
Choose a video mode for connection to a TV.  
Option  
Description  
Select this mode for connection to video devices in North America, the Carib-  
bean, parts of Latin America, and some East Asian countries.  
Select this mode for connection to video devices in the United Kingdom and  
much of Europe, Australia, New Zealand, and parts of Asia and Africa.  
NTSC  
PAL  
(defaults to OFF)  
SDATE SSTAMP  
To add shooting date and time, choose T+ U. To add only shooting date, choose T. When  
OFF is selected, no information will be added to the pictures.  
Q Added shhootiing date andd timee can nnoot be deletedd fromm the piicturrees. Too ttake piicturres without  
date and time, select OFF for SDATEE STAMPP.  
Q When the camera clock is not set,, sseettttiinnggddiiaallooggwwiillllbbeeddiissppllaayyeedd.. SSet the date anndd ttiimmee((P15).  
Q When usinng SDATE SSTTAMP, sellecting WITHOUT DATEE for KPRINT ORDER (DDPOF) is  
recommended (P52).  
Q Date and time can not be added to the movies and the panoramas.  
Menus  
81  
Technical Notes  
Oppttiioonnaall AAcccesssoories  
The camera supports a wide range of accessories from FUJIFILM and other  
manufacturers.  
DIGITAL CAMERA  
FINEPIX T400 - T410  
FINEPIX T350 - T360  
Printing  
Audio/Visual  
A/V cable (optional)  
USB cable  
(supplied)  
TV*  
PictBridge-compatible  
printer*  
SD/SDHC/SDXC  
memory card  
HDMI cable  
(sold separately)  
HDTV*  
Printer*  
HDP-L1  
HD player  
Computer Related  
USB cable (supplied)  
SD card slot or card reader  
Computer*  
* Available separately.  
82  
Optional Accessories  
Accessories from FUJIFILM  
The following optional accessories are available from FUJIFILM. For the lat-  
est information on the accessories available in your region, check with your  
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_  
cameras/index.html.  
Recharggeeable NP-45A: Additional large-capacity NP-45A rechargeable  
Li-ion batteries batteries can be purchased as required.  
BC-45W: Replacement battery chargers can be purchased  
as required. The BC-45W charges an NP-45A/NP-45B  
battery in about 120 minutes at +20°C (+68°F).  
Battery  
chargers  
A/V cable  
AV-C1: Use for viewing pictures on TV.  
HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-  
nect to a High Definition (HD) TV to view photographs  
and movies from SD/SDHC memory cards.  
HD players  
Technical Notes  
83  
Caring for the Camera  
To ensure continued enjoyment of the product, observe the following pre-  
cautions.  
Storage and Use  
If the camera will not be used for an Water and Sand  
extended period, remove the battery Exposure to water and sand can also  
and memory card. Do not store or damage the camera and its internal  
use the camera in locations that are:  
• exposed to rain, steam, or smoke  
• very humid or extremely dusty  
circuitry and mechanisms. When  
using the camera at the beach or  
seaside, avoid exposing the camera  
• exposed to direct sunlight or very to water or sand. Do not place the  
high temperatures, such as in a camera on a wet surface.  
closed vehicle on a sunny day  
Condensation  
• extremely cold  
Sudden increases in temperature,  
• subject to strong vibration  
such as occur when entering a heated  
• exposed to strong magnetic fields,  
building on a cold day, can cause con-  
such as near a broadcasting anten-  
densation inside the camera. If this  
na, power line, radar emitter, motor,  
occurs, turn the camera off and wait  
transformer, or magnet  
an hour before turning it on again. If  
• in contact with volatile chemicals  
condensation forms on the memory  
such as pesticides  
card, remove the card and wait for the  
• next to rubber or vinyl products  
condensation to dissipate.  
84  
Technical Notes  
Caring for the Camera  
Cleaning  
Use a blower to remove dust from the lens and LCD monitor, then gently wipe  
with a soft, dry cloth. Any remaining stains can be removed by wiping gently  
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-  
cleaning fluid has been applied. Care should be taken to avoid scratching the  
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.  
Do not use alcohol, thinner, or other volatile chemicals.  
Traveling  
Keep the camera in your carry-on baggage. Checked baggage may suffer  
violent shocks that could damage the camera.  
Technical Notes  
85  
Troubleshooting  
Problems and Solutions  
Power and Battery  
Problem  
Solution  
Thhee bbaatttery is exhausted: Charge the battery (P11) or insertt a fullyy--ccharged spare battery  
(P6).  
Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P6).  
Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chhaambbeerr ccoovveerr ((P6).  
The cameraa does noot  
turn on.  
Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert  
it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.  
Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
The battery runs down Qis selected for shooting mode: Select Bmode to reduce the drain on the battery  
quickly.  
(P20).  
xTRACKING is selected for FAF MODE: Seelectt a diffferent AF mode (P65).  
The batteery hass bbeen chaarged many times: The battery has reached the end of its charging  
life. Purchase a new battery.  
The cameraa turns off  
suddenly.  
Charge the battery (P11) or iinserrtt a fullly-charged spare battery (P6).  
Charging is slow.  
Charge the battery at room temperaturre (Pvi).  
Reinsert the battery in the correct orientation and make sure that tthhee ppoowweerr ccoonnnneeccttiioonn iiss mmaaddee  
(P6, 11).  
Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging  
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.  
Thhee bbaatttteerry is too hot or too cold: Wait for the battery temperature to sstabiliize (P103).  
The battery does not  
charge. / Battery fault  
icon s is displayed.  
86  
Problems and Solutions  
Menus and Displays  
Problem  
Solution  
Menus and displays are  
not inn English.  
Select ENGLISH for La (P15, 75).  
Shooting  
Problem  
Solution  
Memory is full: Insert a new memory carrd or ddeletee pictures (P7, 41).  
Memory is not formatted: Format the memory caard (P76).  
Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.  
Noo ppiiccture is taken when Thhee memory cardd iiss ddaamaged: Insert a new memory card (P7).  
the shutter button is  
pressed.  
Thhee bbaatttery is exhausted: Charge the battery (P11) or insertt a fullyy--ccharged spare battery  
(P6).  
Thhee ccaammeerraa hhaass ttuurrnneedd ooffff aauuttoommaattiiccaalllly: Turn the camerra on (P13).  
Thhee sshhuutter button is preesssseedd rriigghhtt aafter shhootinngg aa ppaannoorraammaa: Wait for a little while  
then press the shutter button (P23).  
The LCD monitor goes  
dark aftter shhooting.  
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P30).  
Thhee ssuubbjjeecct is close to the camera: Select macro mode (P29).  
Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P29).  
Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P26).  
The cameraa does noot  
focus.  
Macro mode is not  
available  
Choose a diffeerreennt shooting mode (P20).  
Intelligent Face Detection Intellligennt Facee Detecction iiss nnoott aavvaaiillaabbllee iinn tthhee ccuurrrrenntt sshhoooottiinngg mmooddee: Choose a ddiffer-  
is not available.  
ent shooting mode (P20).  
Troubleshooting  
87  
Problems and Solutions  
Problem  
Solution  
Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove  
the obsttructions.  
Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that  
the subject’s face occupiees a laarrger area off the frame (P26).  
Noo fface is detected.  
Thhee ssuubbjjeeccts head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.  
Thhee ccaamera is tilted: Keep the camera leevel (P17).  
Thhee ssuubbjjeeccttss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.  
Wrong subject is  
selected.  
The selected subject is closer to the center of the frame than the main subject. Recompose the  
picture or turn face detection off and frame the picture using focuus lockk (P26).  
Thhee ffllash is not available in thee current shooting mode: Choose a diffeerreenntt sshhooooting mode  
(P20).  
Thhee bbaatttery is exhausted: Charge the battery (P11) or insertt a fullyy--ccharged spare battery  
(P6).  
The flash does not fire.  
Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P64).  
Thhee ccaammeerraa is in silent mode: Turn silent mode off (P75).  
Thhee ffllash is off (P): Choose a diffeerreent flash mode (P30).  
Thhee ddeessireedd ffllaasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhe curreenntt sshhoooottiinngg mmooddee: Choose a diffeerent  
shooting mode (P20).  
Thhee ccaammeerraa is in silent mode: Turn silent mode off (P75).  
Some flash modes are  
not available.  
The flash does not fully Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P102).  
light the subject.  
Thhee ffllaasshh wwindow is obstructed: Hoolldd tthhee ccamera correctly (P17).  
Thhee lleennss iiss ddiirrtty: Clean the lens (P85).  
Thhee lleens is blocked: Keep objects away from the lens (P17).  
sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus  
before shooting (P91).  
Pictures are blurred.  
kis displayed during shooting: Use the flash or a tripod (P31).  
88  
Troubleshooting  
Problems and Solutions  
Problem  
Solution  
This is normaal wheenn slow sshutteer speeeds are seleccted att high tteemmppeerraattuurreess aanndd ddooeess nnoott iinnddiiccaattee  
a malfunction.  
Pictures are mottled.  
Vertical lines appear in The camera hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh tteemmppeerraattuurreess.. TTuurrnn tthhee ccaammeerraa ooffff aanndd wwaaiitt ffoorr  
pictures. it to cool down.  
“Smear”in the form of Vertical purple or white lines may appear aftteerr tthe ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh  
vertical purple or white temperatures or when a very bright object is iinn tthhee ffrraammee;; tthhiiss pphheennoommeennoonn iiss ccoommmmoonn ttoo aallll CCCCDD  
lines appears in the  
display.  
image sensors and does not indicate a maalfunctiion. Theese lineess are recorded in movies but do not  
appear in photographs. Avoid framing bright objects when filming movies.  
Playback  
Problem  
Solution  
Pictures are grainy.  
The pictures were taken with a different make or model of camera.  
Playback zoom is unavail-  
able.  
The pictures were created using ORESIZE or with a different make or model of camera.  
Playback volume is too low: Adjust playback volume (P78).  
Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P17, 46).  
Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P48).  
When 2OPTICAL is seelecteed for pMOOVIE ZOOM TYYPE, zoooming bblocks  
soundd beinngg rrecoorded: Select 1DIGITAL for pMOVIE ZOOM TYPPE (P46).  
Noo ssoouund in movie  
playback.  
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the deviiccee wwiitthh  
deleted.  
which it was originally applied (P71).  
File numbering is  
The battery--cchhamber cover was opened while the camera was on. Turn the cameraa off before  
unexpectedly reset.  
opening thhe baatttteerryy-chamberr ccoovveerr ((P13).  
Troubleshooting  
89  
Problems and Solutions  
Connections/Miscellaneous  
Problem  
Solution  
Thhee ccaamera is not prooppeerrlly connectedd: Connect the cameraa properrly (P49).  
An A/V cablee was ccoonnectted duuringg mmovie playbbaack: Connect the cammera onnce moovie playbaack haas ended.  
Input on the television is set to “TV”: Set input to “VIDEO.  
Thhee camera is not sett to tthhee ccoorrrrect viiddeeoo ssttaannddaarrd: Match the camerra QVIDEO SYS-  
TEM setting to the TV (P81).  
Noo ppiiccture or sound.  
Thhee vvoolume on the TV is too low: Adjust the volume.  
Noo coolor  
Match the cammera QVIDEO SYSTEM setting to the TV (P81).  
The computer does not  
recognize the camera.  
Be sure the cameraa and coomputter aree correctly connected (P58).  
Pictures caan not bbe  
printed.  
Thhee ccaamera is not prooppeerrlly connected: Connect the camera ccorreccttly (P50).  
Thhee pprrinter is off: Turn the printer on.  
Only one copy is printed/  
the date is not printed.  
The printer is not PictBriidge commpatible.  
The cameraa is unre-  
sponsive.  
Temporary camera malfunction: Remove and reinsert the battery (P6).  
Thheebatteryisexhausted:Chargethebattery(P11)orinsertafully-chargedsparebattery(P6).  
The cameraa does noot  
function as expected.  
Remove and reinsert the battery (P6). If the problem persists, contact your FUJIFILM dealer.  
Noo sound.  
Turn silent mode off (P75).  
Date and time added by  
SDATE STAMP Thhee ccaammeerraa clock is not correeccttlly set: Reset the date and time (P15).  
are not correct.  
T+ Uor Tis selected for SDAATE STAMMP option: AAdded shhootingg date aand time  
can not bbe deleteed from tthhe pictures. To take pictures without date and ttiimmee,, sseelleecctt OFF for  
SDATE STTAMP (P81).  
Date and time are added  
to the pictures.  
FinePixViewer can not be FinePixViewer does not support Mac OS X 10.7 or later. Use tthhee aapppplliiccation supplied with Mac OS X  
installled or run. or third-parttyy ssoofftware (P56).  
90  
Troubleshooting  
Warning Messages and DDissplays  
The following warnings are displayed in the LCD monitor:  
Warning  
B(red)  
A(blinks red)  
k
Description  
Low batttery. Charge the battery (P11) orr insertt a fullyy-charged spare battery (P6).  
Battery eexhausteed. Charge the battery (P11) or inseert a fullly-charged spare battery (P6).  
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.  
The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:  
Use fooccuss lock to focuus on another subject at the same distance, then recompose the ppiiccttuurree  
(P26).  
s
(displayed in red with red  
focus frame)  
Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P29).  
Aperture or shutter speed The subject is too bright or too dark and the picture wwiillll bbee oovveerr-- oorr uunnddeerr--eexxppoosseedd.. IIff tthhee ssuubbjjeecctt  
displayed in red  
is dark, use the flash (P30).  
FOCUS ERROR  
TURN OFF THE CAMERA  
AND TURN ON AGAIN  
Camera malfunction or moving parts of lens oobbssttrruucctteedd.. TTuurrnn tthhee ccaammeerraa ooffff aanndd tthheenn oonn aaggaaiinn,,  
takiinngg ccare not to touch the lens. If the message persists, contact a FUJIFILM dealer.  
Thhee mmeemmoorryy ccaardd iiss nnoott ffoorrmmaatttteedd oorr wwaass ffoorrmmaatttteedd iinn aa ccoommppuutteerr oorr ootthheerr ddeevviice:  
Format the memory carrd using the KFORMAToption in the cameraa setup menu (P76).  
CARD NOT INITIALIZED Thhee mmemory cardd ccoonntacts reeqquuiirree cclleeaanniinngg: Clean tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth. If  
the message is repeated, format the card (P76). If the message persists, replace tthhee ccard.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
PROTECTED CARD  
BUSY  
The memory caard is locked. Unlock the ccard (P7).  
The memory caard is inncorrecctly formatted. Use the caamera too format the caard (P76).  
Troubleshooting  
91  
Warning Messages and Displays  
Warning  
Description  
The memory card iss not formatted for use in the camera. Format the carrd (P76).  
The memory carrd contaccts requiire cleaniing or the memory card is daamaged. CClean the contacts  
with a softt,, ddrryy cclloth.. If the meesssage is reepeated, foorrmmaatt tthhee ccard (P76). If the message persists,  
replace the card.  
CARD ERROR  
Incompatible memory card. Usse a compatible card (P9).  
Camera malfunction. Contact a FUJIFILM dealer.  
The memory card iss full aand piicturees caann nnoott bbee rrecoorded oor coppied. Delette picctureess or insert a  
memory cardd with moore freee space.  
bMEMORY FULL  
Memoryy card erroorr oorr ccoonnnneeccttiioonn erroorr: Reinsert the card or turn the camera off and then  
on again. If the message persists, contact a FUJIFILM dealer.  
WRITE ERROR  
Noott eennoough memory reemmaaining to reeccoorrdd aaddddiittiioonnaall ppiictureess: Delete pictures or insert  
a memory cardd with moore freee space.  
Thhee memory cardd iiss nnoot formatted: Format the memory card (P76).  
Thhee ffiile is corrupt or was not crreated with the camera: The file can nnot be viiewed.  
Thhee mmemory cardd ccoonntacts reeqquuiirree cclleeaanniinngg: Clean tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dryy clotth. If  
the message is repeated, format the card (P76). If the message persists, replace tthhee ccard.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
READ ERROR  
92  
Troubleshooting  
Warning Messages and Displays  
Description  
Warning  
The caammeerraa hhaass rrun out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee  
memory caard and select RENEW for BFRAAME NO. Take a picture to reset frame nnuumm--  
bering to 100-0001, then select CONTINUOUS for BFRRAME NO. (P77).  
FRAME NO. FULL  
PRESS AND HOLD  
THE DISP BUUTTON TO  
DEACTIVATE SILENT MODE  
An attempt wwaass made to choose a flash mode or adjust the volume with the cammera inn ssilent  
mode. Exit silent mode before choosing a flash mode or adjusting the volume (P75).  
A searrch hass retuurrned moore 5,0000 ressults, or moorre thann 999 ffrraammeess wweerree sseelleecctteedd fforr delettion.  
Perform aa different search or select ffewer pictures.  
An aatttteemmpptt wwaass mmaaddee ttoo ddeelleettee oorr rroottaattee ttoo aa pprrootteecctteedd ppiiccttuurree.. RReemmoovvee pprrootteeccttiioonn aanndd ttrryy  
TOO MANY FRAMES  
PROTECTED FRAME  
again (P71).  
aCAN NOT CROP  
apictures can nott be croopped.  
CAN NOT CROP  
The picture is damaged or was not createedd wwiitthh tthhee ccamera.  
An attempt was made to create a resized copy at a size equal to or larger than the original.  
Choose a smaller size.  
aCANNOT EXECUTE  
CAN NOT ROTATE  
An attempt was made to rotate a picture that can not be rotated.  
FCAN NOT ROTATE Movies can not be rotated.  
mCANNOT EXECUTE Red-eye removal can not be applied to the selected picture.  
FCANNOT EXECUTE Red-eye removal can not be applied to movies.  
Troubleshooting  
93  
Warning Messages and Displays  
Warning  
NO CARD  
INSERT A NNEW CARD  
Description  
Noo mmeemmoorryy ccard inserted; innsseerrtt aa mmeemmoorryy ccard.  
NO CARD  
DPOF FILE ERROR  
CAN NOT SET DPOF  
The DPOF print order on the currrent meemmory caarrdd contaiins more tthan 9999 iimages.  
The picture caan not be pprintedd uusing DPOF.  
FCAN NOT SET DPOF Movies can not be printed using DPOF.  
A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other  
device. Confirm that the device is turned on and that the USB caable iss conneected.  
Printer ouut of paperr or ink, orr other prriinter erroor. Check printer (see printer manual for details).  
To resume printing, turn the printer off and then turn it back on.  
COMMUNICATTION ERROR  
PRINTER ERROR  
PRINTER ERROR  
RESUME?  
Printer out of paper or ink, or other pprriinntteerr eerrrroorr.. Check printer (see printer manual foorr ddeettaaiils). IIff  
printing does not resume automatically, press MENU/OK to resume.  
An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa  
format not supported by the printer. Movies and some picturres creatted with oother devvices caann  
CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall  
to conffirm thhat thee printteer ssuuppppoorrttss tthhee JJFFIIFF--JJPPEEGG oorr EExxiiff--JJPPEEGG fformaat. If iit dooeess not,, tthhee ppiiccttuurreess  
can not be pprinted.  
94  
Troubleshooting  
Appendix  
Tips and Tricks  
The following tips and tricks will help you get the most from your camera.  
Battery Performance  
Choose the following settings for improved battery performance:  
bFACE DETECTION (P33): OFF  
FAF MODE (P65): rCENTER  
ELCD MODE (P78): UPOWER SAVE ON  
Thhee SSeellff-timer  
To prevent blur caused by the camera moving when the shutter button is pressed,  
use the two-second timer.  
To turn the timer off, press DISP/BACK.  
95  
Tips and Tricks  
Intelligent Face Detection  
When ON is selected for bFACE DETECTION (P33), you can:  
Zoom in on faces when ZOOM (CONTINUOUS) is selected for AIM-  
AGE DISP. (P76).  
Shooting  
Remove red-eye by selecting ON for BRED-EYE REMOVAL (P70).  
Zoom in on faces during slide shows (P70) or by pressing the selector  
down during playback.  
Playback  
Search for faces using bIMAGE SEARCH (P42).  
Crop the background from portraits using GCROP (P71).  
Print one copy for each person in the photo.  
Printing  
96  
Appendix  
Tips and Tricks  
Proo TTips  
• To photograph backlit subjects, select CNATURAL & Nfor  
ASHOOTING MODE (P20) and position your subject in the  
center of the frame.  
• To photograph subjects that are in motion, select xTRACK-  
ING for FAF MODE (P65).  
• To photograph night scenes, raise sensitivity (  
flash on ( 30).  
P61) and turn the  
P
Appendix  
97  
Meemory Carrd Caappacityy  
The following table shows the recording time or number of pictures available  
at different image sizes. All figures are approximate; file size varies with the  
scene recorded, producing wide variations in the number of files that can be  
stored. The number of exposures or length remaining may not diminish at an  
even rate.  
FinePix T400 - T410  
Medium  
2 GB  
4 GB  
8 GB  
O
T
FINE  
240  
270  
310  
470  
700  
920  
1680  
NORMAL  
470  
530  
620  
920  
1340  
1740  
3040  
FINE  
480  
540  
640  
940  
1400  
1840  
3360  
NORMAL  
950  
FINE  
970  
NORMAL  
1910  
2130  
2510  
3680  
5380  
6980  
12160  
O4:3  
O3:2  
O16:9  
P4:3  
P16:9  
Q4:3  
Q16:9  
h1280†  
1060  
1250  
1840  
2690  
3490  
6080  
1080  
1280  
1890  
2810  
3690  
6720  
9min.  
18min.  
55min.  
116min.  
37min.  
111min.  
233min.  
f
27min.  
58min.  
g
* Individual movies can not exceed 2GB in size or 29minutes in length. If more than 2GB are avail-  
able, the camera will show the time remaining for a movie 2GB in size.  
Use a Gcard or better when shooting HD movies.  
98  
Appendix  
Memory Card Capacity  
FinePix T350 - T360  
Medium  
2 GB  
4 GB  
8 GB  
O
T
FINE  
270  
310  
360  
530  
700  
1150  
1680  
NORMAL  
540  
610  
FINE  
550  
620  
NORMAL  
1090  
1220  
1430  
2060  
2690  
4290  
6080  
FINE  
NORMAL  
2180  
2440  
2870  
4120  
5380  
8580  
12160  
O4:3  
O3:2  
O16:9  
P4:3  
P16:9  
Q4:3  
Q16:9  
h1280†  
1110  
1240  
1470  
2130  
2810  
4600  
6720  
710  
730  
1030  
1340  
2140  
3040  
1060  
1400  
2300  
3360  
9min.  
18min.  
55min.  
116min.  
37min.  
f
27min.  
58min.  
111min.  
233min.  
g
* Individual movies can not exceed 2GB in size or 29minutes in length. If more than 2GB are avail-  
able, the camera will show the time remaining for a movie 2GB in size.  
Use a Gcard or better when shooting HD movies.  
Appendix  
99  
Specificaattiioons  
System  
Model  
Digital Camera FinePix T400 - T410 / T350 - T360  
Effective pixels  
FinePix T400 - T410  
16 million  
FinePix T350 - T360  
14 million  
/
CCD  
1 2.3-in., square-pixel CCD with primary color filter  
Storage media  
File system  
SD/SDHC/SDXC memorryy ccards  
Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order  
Format (DPOF)  
File format  
Still pictures: Exif 2.3 JPEG (compressed) Movies: AVI-format Motion JPEG  
Image size (pixels)  
FinePix T400 - T410  
O4 : 3: 4,608 × 3,440  
P4 : 3: 3,264 × 2,448  
Q4 : 3: 2,304 × 1,728  
O3 : 2: 4,608 × 3,072  
O16 : 9: 4,608 × 2,592  
P16 : 9: 3,072 × 1,728  
Q16 : 9: 1,920 × 1,080  
FinePix T350 - T360  
O4 : 3: 4,288 × 3,216  
O3 : 2: 4,288 × 2,864  
O16 : 9: 4,288 × 2,416  
P16 : 9: 3,072 × 1,728  
Q16 : 9: 1,920 × 1,080  
P4 : 3: 3,072 × 2,304  
Q4 : 3: 2,048 × 1,536  
Leens  
Fujinon 10 × opticall zoom llens,, F3.4 (wide angle) – F5.6 (telephoto)  
Focal length  
Digital zoom  
f=5.0 mm–50.0 mm (35-mm forrmat equivalent: 28 mm–280 mm)  
FinePix T400 - T410  
Approx. 7.2 × (up tto 72 ×× wwhen coombinned wiitth optiical zoom)  
FinePix T350 - T360  
Approx. 6.7 × (up tto 67 ×× wwhen coombinned wiitth optiical zoom)  
100  
Appendix  
Specifications  
System  
Aperture  
Focus range  
F3.4/F8.4 (wide angle), F5.6/F14.0 (telephoto); uses Neutral Density (ND) filter  
Apppprrooxx.. 4455 ccmm ((11..44 fft.)–infinittyy (wide angle); 2.0 m (6.55 fft..)–infinityy (telephoto)  
(distance from front of lens)  
Maaccrro: approx. 3 cm22..55 mm ((00..11 fftt.88..22 fft.) (wide angle); 90 cm–22..55 mm ((22..99 fftt..88..22 fft.) (tele-  
photo)  
Sensitivity  
Sttaannddaarrdd oouuttput sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 32000 (imagge size Q);  
AUTO  
Metering  
256-segment through-the-lens (TTL) metering  
Exposurre control  
Programmed AE  
/
Exposure compensation –2 EV – +2 EV in increments of 13EV  
Picture stabilization  
Shutter speed  
(combined mechaniccal and Other modes: 8 s–1 2,000s  
Optical sstabilization, CCCCDD sshhiifft  
/
/
AUTO mode: 1 4s–1 2,000s  
/
electronic shutter)  
Coonnttinuous  
Focus  
Up to 1.1 fps; max. 3 frames  
Mode: Singgle AF, ccontinuuous AF  
Autofoocus syystem: Contrast-detect TTL AF  
Focus--area selection: CENTER, TRACKING  
White balance  
Self-timer  
Automatic scene detection; six manuaal preset moodes for direct sunlight, shade, daylight fluores-  
cent, warm white fluorescent, cool whiittee fflluuoorreesscceenntt,, aanndd iinnccandescent  
Off, 10 sec., 2 sec.  
Appendix  
101  
Specifications  
System  
Flash  
CCD-metered auto flash control; effective range when sensitivity is set to AUTOO is approx.  
50 cm–44..55 mm//11..66 fftt..1144..77 fftt.. (wide angle), 90 cm22..88 mm//22..99 fftt..99..11 fftt.. (telephoto); effective  
range in mmaaccrroo mmooddee iiss aapppprrooxx.. 3300 ccmm8800 ccmm//00..99 fftt..22..66 fftt.. (wide angle), 80 cm–1..22 mm//22..66 fft.–  
3.9 fft. (telephoto)  
Flash mode  
LCD monitor  
Movies  
AUTO, N, P, O(red--eye rreemoval off); K, L, P, M(red-eeye remmoval on)  
3.0-in., 230k-dot color LCD monitor; frame coverage approx. 96%  
Frame size 1,280 × 720, 640 × 480, 320 × 240; 30 fps; monaural sound  
Languages  
Arabic, Buulgarriian, Siimmpplliiffiieedd CChinesse, Trraaditiioonaall Chinesse, Czzeech, Daanishh, Duttcch, English, Farsi,  
Finnish, French, Geerman, Greeek, Hebrew, Hunnggaarriiaann,, IInnddoonneessiiaann,, IIttaalliiaann,, JJaappaanneessee,, KKaazzaakkhh,,  
Korean, LLatvian, Lithuanian, Noorrwweeggiiaann,, PPoolliisshh,, PPoorrttuugguueessee,, RRoommanian, Russian, Serbian,  
Slovak,, Sppaanniisshh,, SSwweeddiisshh,, TThhaaii,, TTuurrkkish, Ukkrainian, Vietnamese  
Input/output terminals  
A/V OUT  
NTSC or PAL output with monaural sound  
(audio/video output)  
Digital input/output  
USB 2.0 High-Speeed; sharees A/V OUT cconnector; MTP/PTP  
Power supply/other  
Power suppplly  
NP-45A/NP-45B rechargeable battery  
Battery life (approximate  
numberr of fraames thhaatt ccan  
be takeen withh a fullly-charged  
battery)  
Battery type  
NP-45A/NP-45B (type supplied with camera)  
Approoximate number of frames  
160  
CIPA standdard, meeaasured inn B(auto) mode using battery supplied with caamera andd SD mem-  
ory card.  
Notte: NNumberr of shhoots thhaat caann bbee ttaakkeenn wwiitthh bbaatttteerryy vvaarriieess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll  
decline at low temperatures.  
102  
Appendix  
Specifications  
Power supply/other  
Charging time  
Approx. 120 minutes (+20 °C/+68 °F)  
Dimensions (W × H × D) 104.2 mm × 58.5 mm × 28.5 mm/4.1 in. × 2.3 in. × 1.1 in.,  
excluding projections (minimum depth 19.8 mm/0.7 in.)  
Shooting weight  
Weight  
Approx. 159 g/5.6 oz., including battery and memory card  
Approx. 142 g/5.0 oz., excluding battery, accessories, and memory card  
Operating conditions  
Temperratuurre: 0 °C – +40 °C/+32 °F – +104 °F  
Humidity: 10 % – 80 % (no condensation)  
NP-45A/NP-45B rechargeable battery  
Noommiinnal voltage  
Noommiinnaall ccaappaacciitty  
DC 3.7V  
720 mAh  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.5 in. × 0.2 in.  
Weight  
Approx. 15.5 g/0.5 oz.  
AC power adapter  
Rated input  
Input capacitty  
Rated output  
100V–240V AC,, 5500//6600 HHz  
100 V: 10VA  
5.0V DC, 1000 mA  
240 V: 20VA  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Weight Approx. 42 g/1.5 oz., excluding battery  
Weight and dimensions may vary with the country or region of sale.  
Appendix  
103  
Specifications  
Noottiices  
• Specifications subject to change without notice. FUJIFILM shall not be held liable for  
damages resulting from errors in this manual.  
• Although the LCD monitor is manufactured using advanced high-precision technol-  
ogy, small bright points and anomalous colors may appear, particularly in the vicinity  
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-  
tion; images recorded with the camera are unaffected.  
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,  
electric fields, static electricity, or line noise).  
• Due to the type of lens used, some distortion may occur at the periphery of images.  
This is normal.  
104  
Appendix  
Meemo  
105  
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN  
http://www.fujifilm.com/products/digital_cameras/index.html  
Please contact your local distributor for repairs and technical support. (see Worldwide  
Network list)  
Restrictions on Camera Settings  
The options available in each shooting mode are listed below.  
Shooting Mode  
Option  
QB P C D L Y K MrNOHPQR SU VWF  
1 ✔  
✔ ✔ ✔1  
✔ ✔ ✔  
AUTO  
N
✔ ✔  
✔ ✔ ✔1  
BOFF  
O
P
✔ ✔  
✔ ✔ ✔ ✔1 ✔ ✔ ✔  
✔ ✔ ✔1  
1
✔ ✔  
1 ✔ ✔1  
1 ✔  
N
K
L
M
P
✔ ✔ ✔  
✔ ✔ ✔ ✔1  
✔ ✔ ✔  
BON  
✔ ✔  
✔ ✔  
✔ ✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔  
h
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
2 ✔ ✔ ✔ ✔  
2 ✔ ✔ ✔ ✔ ✔1 1 1 1 1 1 1 1 1 1 1 1 1  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 1  
F
H
F
d
1 1 ✔ ✔1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1  
AUTO  
3200  
1600  
800  
400  
200  
N
100  
O
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
O
T
P
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
Q
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
FINE  
NORMAL  
Restrictions on Camera Settings  
Shooting Mode  
Option  
QB P C D L Y K MrNOHPQR SU VWF  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
c
a
b
P
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
D
ON  
OFF  
ON  
OFF  
r
x
✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
R
b
F
✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔1  
✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔1 1 1 1  
✔ ✔  
✔ ✔  
✔ ✔ ✔ ✔  
1 1 1 ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔1 1  
1 1 1 1 1 1 1 1 1 1 1 1  
P
F(Fmode)  
h1280  
W
f
g
E
M
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
l
m
OFF  
L
m
B
D
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔  
✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 Automatically optimized for selected shooting mode.  
2 The camera automatically analyzes and selects macro mode ON/OFF.  
3 Aspect ratio fixed at 4 : 3.  

Ariston 28 MFFI User Manual
Audiovox Prestige Detachable Face Stereo System User Manual
Audiovox VBP500 User Manual
Casio Cash Register SE S6000 User Manual
Clarion ProAudio DXZ545MP User Manual
CycleOps PowerTap User Manual
Dual Bandpass Subwoofer System BP1204 User Manual
FujiFilm Digital Camera F750EXR User Manual
Jabra SP200 User Manual
JVC GET0638 002A User Manual