Dual XDVD710 User Manual

XDVD710

INSTALLATION/OWNER’S MANUAL

DVD Multimedia Receiver with 7” Touch Screen Display

TOUCH

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to

prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking

brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

XDVD710 PREPARATION

Table of Contents

Page

DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

XM Activation /Operation .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ꢀ

5-7

9-10

11-1ꢀ

13-14

15-ꢀ0

ꢀ1-ꢀꢀ

ꢀ3

ꢀ4

ꢀ5-ꢀ8

ꢀ9-30

3ꢀ-39

40-4ꢀ

43-44

45-46

47-48

49-5ꢀ

53-54

DVD Region Management

Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the

XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read

the instructions provided with each disc. This player has been designed to play back DVD software that has been

encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region

areas for which it has been designed.

The XDVD710 will play discs labeled “Region 1” or “All”.

DVD region codes:

1 - USA, Canada

ꢀ - Japan, Europe, South Africa, Middle East

3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia

4 - Australia, New Zealand, Mexico, South America

5 - Eastern Europe, Russia, India, Africa

6 - China

ꢀ

XDVD710 PREPARATION

WARNING

Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle

must not operate this unit by watching videos or playing video games while driving.

Failure to follow this instruction could lead to driver distraction which could result in

serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or

property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from

the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit

must not be installed so that the screen is visible from the driver’s seat. When installing

this unit in the front console/dashboard, the unit must be positioned so that it is facing the

front passenger seat only. Failure to follow this instruction could lead to driver distraction

which could result in serious injury or death to the vehicle’s occupants or persons outside

the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the

parking brake is fully engaged. To this end, this unit includes a parking brake lock-out

feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the

parking brake is not fully engaged. When installing this unit, the installer must connect

the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in

order to make the parking brake lock-out feature operable. DO NOT simply ground the

parking brake detect wire to a metal portion of the vehicle. Failure to properly install

the parking brake lock-out feature could lead to driver distraction which could result in

serious injury or death to the driver’s occupants or persons outside the vehicle and/or

property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to

disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking

brake and/or (b) purchasing/using any device or unit designed to send necessary brake

signals to the unit. Failure to follow these instructions could lead to driver distraction

which could result in serious injury or death to the driver’s occupants or persons outside

the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s

occupants can hear traffic-related sounds such as police and emergency vehicles.

Failure to follow this instruction could lead to driver distraction which could result in

serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or

property damage.

XDVD710 OPERATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL XDVD710 is installed by a professional installer

or an authorized dealer. This product is only for use in vehicles with 1ꢀVDC negative ground only.

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to

prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking

brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

To prevent damage or injury:

1. Make sure to ground the unit securely to the vehicle chassis ground.

ꢀ. Do not remove the top or bottom covers of the unit.

3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

4. Do not subject the unit to excessive shock.

5. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may

cause the unit to malfunction.

6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

7. Use only the provided hardware and wire harness.

8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

9. If you experience problems during installation, consult your nearest DUAL dealer.

10.If the unit malfunctions, reset the unit as described on page 1ꢀ first. If the problem still persists, consult your

nearest DUAL dealer or call tech assistance @ 1-866-38ꢀ-5476.

11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents

such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

1ꢀ.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than

usual. Normal brightness will return after using the monitor for a while.

Additional Notes:

1.When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables

with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

ꢀ.Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous

to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap

immediately.

This device complies with part 15 of the FCC rules and regulations.

Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and

ꢀ) This device must accept any interference received, including interference that may cause undesired operation.

XDVD710 INSTALLATION

Preparation

Please read entire manual before installation.

Before You Start

•Disconnect negative battery terminal. Consult a qualified technician for instructions.

•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it

would be subject to dust, dirt or excessive vibration.

Getting Started

•Slide the unit out of the mounting sleeve.

•Install mounting sleeve into opening, bending tabs to secure.

•Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure.

•Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).

•Test for correct operation and slide unit into mounting sleeve.

• Attach unit to mounting sleeve using supplied #1 Phillips screws.

•Snap trim ring into place.

•Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or Phillips head

screws.

Mounting sleeve opening dimensions

7-3/16” x ꢀ-1/16” (183 mm x 53 mm)

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

XDVD710 INSTALLATION

Expanded Wiring Diagram - Inputs/Outputs

Wiring Notes:

Subwoofer output

The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external

amplifier.

Rear view camera

A rear view camera (not included) can be used with the CAMERA input.

NEED HELP??

Call our Technical Service Hotline, 1-866-38ꢀ-5476.

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to

prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking

brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Altering or

defeating this safety feature is a violation of law and is prohibited.

XDVD710 INSTALLATION

Wiring Diagram - Optional A/V Connections

XDVD710 OPERATION

IR Remote Preparation

To first use the IR Remote control,

you must first pull the battery

insulation tape out

Notes:

•

Remove the battery if the remote will

not be used for a month or longer

•

Remove and dispose of battery properly

Insert or replacing the Battery:

Remove the battery holder

Remove the battery from the battery

holder

Install the new battery

Make sure to keep the (+) side up

Insert the battery holder

CAUTION!!!

Do not store battery with metallic

objects or materials

•

XDVD710 OPERATION

Control Locations - Monitor Closed

Band

Play/Pause/Scan

Stop

Auto Store/Preset Scan

Secondary LCD

Display

Chapter/Track Up

Chapter/Track Down

Open/Close Monitor

Eject

13 Fast Forward

Fast Reverse

Rotary Encoder/Enter

Mode

15 Mute

16 Power/Volume

Monitor Notes:

•

This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will

not obstruct the dash, shifter or any other controls.

Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE / and OPEN

buttons on the front panel only.

The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the

obstacle and press OPEN again to resume the monitor open/close sequence.

XDVD710 OPERATION

Control Functions - Monitor Closed

BAND

Press BAND to increment from FM1, FMꢀ, FM3, AM1] FM1.

AS/PS

(Auto Store /Preset Scan)

Press AS/PS momentarily to start station PRESET SCAN function,

Press AS/PS for ꢀ seconds to start AUTO STORE station preset function in

current BAND.

SECONDARY LCD

DISP

Additional LCD for system information while monitor is closed.

Press the DISP button to display various information on the secondary LCD.

OPEN

Press OPEN to open or close the monitor. The unit will emit 1 confirmation

beep upon opening, 3 beeps when closing. Be careful not to not touch

or obstruct the monitor movement during the open/close sequence, or

permanent damage could occur.

Press once to eject disc.

EJECT

Rotate clockwise/counter-clockwise to select desired item and press once to

ENTER.

ROTARY

Press once to incrementally select desired source.

Selects the next chapter/track for playback.

Selects the previous chapter/track for playback.

Stop playback of DVD/CD/MP3/iPod.

Press once for PAUSE, press again for PLAY.

Fast forward the content.

MODE

TRACK UP

TRACK DOWN

STOP

PLAY/PAUSE

FAST FORWARD

FAST REVERSE

MUTE

Fast reverse the content.

Press once to MUTE audio, MUTE will appear in the secondary LCD. Press

again to return audio.

Press POWER momentarily to turn the unit on, the unit will beep ꢀ times.

Press and hold POWER for more than ꢀ seconds, unit will beep 1 time, then

turn off. Note: EJECT will still function even if POWER is off.

POWER ON/OFF

VOLUME

Rotate clockwise/counter clockwise for desired VOLUME level,

XDVD710 OPERATION

Control Locations - Monitor Open

Disc-in indicator - Red = Disc inserted, White = No disc.

ANGLE - Press to decrease the monitor view angle.



ANGLE  - Press to increase the monitor view angle.

INFO - Press to select DVD INFO and press and hold for BRIGHTNESS.

Press to RESET system.

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to

prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking

brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

XDVD710 OPERATION

Control Functions - Monitor Open

Disc-in indicator

White = No disc

Red = Disc inserted

Monitor Angle 

Press ANGLE  to increase the monitor view angle.

Press ANGLE  to decrease the monitor view angle.

Notes:

• Do not attempt to move the monitor up/down by hand - severe damage will

occur. Use the front panel buttons or the remote control only.

• The color of the LCD monitor varies between viewing angles. Select the angle

with the most optimum view for your location.

• The last position of the monitor will be saved in memory. The monitor will

return to its last position automatically the next time it is opened.

INFO/PIC

Press INFO button for 1 second to display DVD disc information.

Press and hold INFO for ꢀ seconds to change TFT LCD BRIGHTNESS:

Press ANGLE  to increase, ANGLE  to decrease or use VOLUME rotary to

adjust the level up or down, (0 minimum/ꢀ0 maximum), 10 is default.

SYSTEM RESET

If you experience abnormal operation or, your unit is inoperable, press the

RESET button for 3 seconds, located on the front bottom-right corner of the unit.

After a system reset, the unit restores all factory default settings.

Note: Use the tip of a pen to access the button.

1ꢀ

XDVD710 OPERATION

Control Locations - Remote

29 30

37 38

Info

Root

Mode

Key #0

Repeat

Mute

Chapter/Track Down

Chapter/Track Up

Fast Rewind

Open/Close

Power

Band/Stop

Audio Select

Escape

Key #1

Fast Forward

Zoom

Key #ꢀ

4-Way - Up

Key #3

Audio

Volume Up

Key #4

Picture

Angle/iPod Music mode

Sub-Title/iPod Video mode

4-Way - Left

Key #5

Key #6

4-Way - Right

Repeat A-B

Title Menu

Volume Down

Key #7

Key #8

4-Way - Down

Key #9

* The remote control uses one 3 volt Lithium CRꢀ0ꢀ5 battery. For best performance, replace only with CRꢀ0ꢀ5 or equivalent.

XDVD710 OPERATION

Control Functions - Remote

Mode

Mute

Press once to incrementally select desired source.

Press once to MUTE audio, press again to return audio.

Press once to open monitor, press again to close the monitor.

Press once to turn the unit on, press again to turn unit off.

Direct access chapter/track/preset station for current BAND.

Increase VOLUME.

Open/Close

Power

Keys 0-9

Volume Up

Volume Down

Info

Decrease VOLUME.

Displays DVD information.

Search function in the DVD/CD disc mode.

Press to increment BAND, or STOP while in DVD/MP3 mode.

Enter AUDIO Setup mode.

Band/Stop

Audio Select

Escape

Exit current menu.

4-Way -Up/Down/Left/Right

Navigating system and DVD menus.

Enter the MAIN system menu.

Picture

BRIGHTNESS parameter setting for TFT.

Starts/pauses playback or confirm settings.

Repeat playback from time frame A to time frame B.

Enters the title menu on DVD.

Repeat A-B

Title Menu

Root

Enters the main menu of the DVD.

Repeat

Repeats playback of current chapter/track or folder.

Selects the previous chapter/track for playback.

Selects the next chapter/track for playback.

Fast reverses the disc/iPod content.

Chapter/Track Down

Chapter/Track Up

Fast Rewind

Fast Forward

Zoom

Fast forwards the disc/iPod content.

Zooming in/out on an image from DVD disc.

Change the audio language for DVD disc playback.

Audio

Angle

Selects between different angles (when available) for a scene/Selects

iPod Music mode.

Sub-Title

Language selection for subtitle/Selects iPod Video mode.

XDVD710 OPERATION

General Operation

Press POWER momentarily to turn the unit on, the unit will beep ꢀ times.

Press and hold POWER for more than ꢀ seconds, unit will beep 1 time, then

Power On/Off

turn off. Note: EJECT will still function even if POWER is off.

Press OPEN to open or close the monitor. The unit will emit 1 confirmation

beep when opening, 3 beeps when closing. Be careful not to not touch the

monitor during the open/close sequence.

Monitor Open/Close

Notes:

• The unit will stop automatically during open/close if an obstacle is detected.

If this occurs, remove the obstacle and press OPEN again to resume the

monitor open/close sequence.

• Audio can be heard while the monitor is closed.

Press ANGLE  to increase the monitor view angle.

Press ANGLE  to decrease the monitor view angle.

Monitor Angle Position

Notes:

• Do not attempt to move the monitor up/down by hand - severe damage will

occur. Use the front panel buttons or the remote control only.

• The color of the LCD monitor varies between viewing angles. Select the

angle with the most optimum view for your location.

• The last position of the monitor can be saved in memory. The monitor will

return to its last position automatically the next time it is opened.

Notes:

• The vehicle must be in park and the parking brake applied to view video on

the in-dash monitor.

• As a safety feature, a blue “CAUTION” screen will show on the display when

the vehicle's parking brake is not engaged. DVD, AV1 audio can be heard

while the vehicle is in motion.

• The video display of the in-dash unit will not operate while the vehicle is

moving. This is a safety feature to prevent driver distraction. In-dash video

functions will only operate when vehicle is in Park and the parking brake

is engaged. It is illegal in most states for the driver to view video while the

vehicle is in motion. Refer to local laws in your area.

See DVD operation on page 3ꢀ for more details on how to initialize the

PARKING BRAKE.

XDVD710 OPERATION

General Operation

Mode

Press MODE to select between TUNER, DVD, AUX IN, XM, iPOD and CAMERA

inputs. Modes of operation are indicated in the OSD (On Screen Display) and

secondary LCD.

Notes: XM tuner and/or iPod (both optional) must be connected to appear in

the MODE selection string.

Optional Mode Selection

With the monitor open, press the top left corner of the screen to display the

OSD menu. Press TUNER, DVD, AUX IN, XM, iPOD or CAMERA icon to select

the desired source.

Volume

Mute

Adjust VOLUME using rotary encoder or the VOL   buttons (00-40).

Press MUTE to silence the audio;

will appear in the OSD.

Press MUTE again to cancel.

Audio Adjustment

from front panel

Press in VOLUME rotary knob on left front panel,

Press in VOLUME again to advance to desired parameter to be changed,

Turn VOLUME rotary Q or P to adjust to desired level,

Press in VOLUME to advance to next selection,

Press and hold the VOLUME button on the front panel to exit.

ITEM

RANGE

USER

FLAT

POP

JAZZ

CLASSIC

NEWS

MOVIE

TECHNO

-7

ROCK

URBAN

RAVE

00 L

BASS

TREBLE

FADE

-7

BALANCE

SUB

-7

LOUD

OFF

Audio Adjustment

from Remote

Press the SEL button,

Press the   buttons on the remote to select an item to be adjusted,

Press  or  to adjust the desired setting,

Press the ESC button on the remote control to exit the audio control menu.

Notes: The Bass and Treble levels are only adjustable when EQ is set to

"User” mode. The Loud function compensates for deficiencies in sound

ranges at low levels. When the Loud function is on, LOUD is displayed on the

screen.

XDVD710 OPERATION

General Operation

Press INFO button for 1 second to display DVD disc information.

INFO/PIC

Press and hold INFO for ꢀ seconds to change TFT LCD BRIGHTNESS:

Press ANGLE  to increase, ANGLE  to decrease, or use VOLUME rotary to

adjust the level up or down. (0 minimum/ꢀ0 maximum) 10 is default.

RGB BRIGHTNESS

While in iPod Video playback, AUX IN or CAMERA mode:

Press and hold INFO for ꢀ seconds to access PICTURE MENU, press INFO briefly

again to step to next selection:

CVBS Screen Controls

SHARPNESS

CONTRAST

COLOR

BRIGHTNESS

TINT

PICTURE MENU

[SHARPNESS

[CONTRAST

[COLOR

[BRIGHTNESS

[TINT

Note: Adjustments to

SHARPNESS, CONTRAST,

COLOR, BRIGHTNESS & TINT

are only possible while in

either iPod video playback,

AUX-IN or CAMERA CVBS

mode.

Press ꢀor ꢀꢀto adjust the sharpness (0 minimum/+ꢀ0 maximum).

Press ꢀor  to adjust the contrast (0 minimum/+ꢀ0 maximum).

Press ꢀor  to adjust the color (0 minimum/+ꢀ0 maximum).

Press ꢀor  to adjust the brightness (0 minimum/+ꢀ0 maximum).

Press ꢀor  to adjust the tint (0 minimum/+ꢀ0 maximum).

XDVD710 OPERATION

General Operation

BAND

Press BAND to increment from FM1, FMꢀ, FM3, AM1] FM1.

AS/PS

(Auto Store /Preset Scan)

Press AS/PS momentarily to start station PRESET SCAN function. The unit

will now scan your program presets for 10 seconds for each preset in that

band. Press AS/PS again to stop scanning. Press AS/PS for ꢀ seconds to

start AUTO STORE station preset function in current BAND.

DISP

Press the DISP button to display various information on the secondary LCD

screen when the monitor is closed.

OPEN

Press OPEN to open or close the monitor. The unit will emit 1 confirmation

beep upon opening, 3 beeps when closing. Be careful not to not touch

or obstruct the monitor movement during the open/close sequence, or

permanent damage could occur.

EJECT

Press once for DISC ejection.

ROTARY

Press to access MAIN menu, rotate clockwise/counter-clockwise to select

desired item and press once to ENTER.

MODE

TRACK UP

Press once to incrementally select desired source.

Selects the next chapter/track for playback.

Selects the previous chapter/track for playback.

Stop playback of DVD/CD/MP3/iPod.

TRACK DOWN

STOP

PLAY/PAUSE

FAST FORWARD

FAST REVERSE

MUTE

Press once for PAUSE, press again for PLAY.

Fast forward the disc content.

Fast reverse the disc content.

Press once to MUTE audio, press again to return audio, an icon indicator will

flash on the TFT monitor.

POWER ON/OFF

VOLUME

Press POWER momentarily to turn the unit on, the unit will beep ꢀ times.

Press and hold POWER for more than ꢀ seconds, unit will beep 1 time, then

turn off. Note: EJECT will still function even if POWER is off.

Rotate VOLUME rotary knob Q or P for desired VOLUME level, press once to

access the AUDIO SETUP MENU.

PROGRAMMABLE TURN-ON

VOLUME

Turn VOLUME rotary to desired listening level, press and hold VOLUME

rotary knob for 3 seconds to program currently selected volume level.

XDVD710 OPERATION

General Operation

Secondary LCD Information

Note: Secondary LCD only functions when TFT monitor is closed.

1) LOC

2) ST

LOCAL indicator, icon will be off when DISTANCE (DX) is selected

STEREO radio station indicator

3) TIME

4) LOUD

5) SAT

Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK, etc

LOUDNESS selection indicator

XM SATELLITE RADIO indicator

Note: XM Radio requires an optional XM tuner and subscription,

Visit www.xmradio.com on where to buy and latest subscription rates or see

your local XM Radio retailer for more details. See page 53 for more details.

XDVD710 OPERATION

General Operation

There are three methods to access the MAIN menu

Main Menu Access

•

Press the ENTER button on the right ROTARY knob

Press the MENU button on the remote control

Touch the upper left corner of the touch screen

ꢀ

1ꢀ

Touch Access Buttons

Touch to access AM/FM TUNER mode

Touch to access CD/DVD mode, (CD/DVD must be inserted)

Touch to access iPod mode, (iPod must be connected to activate)

Touch to RETURN to previous screen

Touch to access XM mode, (XM tuner must be connected to activate)

Touch to access CAMERA mode, if optional camera isn't connected then

"No Video Signal" will be displayed

Touch to STANDBY screen, touch screen again or any button to resume display

Note: VOLUME level can be controlled in STANDBY mode

Touch to access AUXILIARY A/V INPUT mode

Touch to access SCREEN SETUP menu

Touch to access GENERAL SETUP menu

10)

11)

12)

Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function)

Touch to access MAIN Source menu

RAPID DIAL can also control touch screen functions from the main menu

Rapid Dial

•

Select desired function rotating clockwise or counter-clockwise

Function will be outlined in yellow

Press to confirm/ENTER

ꢀ0

XDVD710 OPERATION

GENERAL Setup - Menu

General Setup Menu

•

Press the GENERAL button to access the GENERAL setup mode

Select desired parameter you wish to change

Page will return back to previous screen after 10 seconds of inactivity or

by pressing the RETURN button

Note:

Default anti-theft password

is 0000

GENERAL Setup Menu matrix

Options

Settings

Default

Function

USA

S-Amer1

S-Amerꢀ

Europe

00:00

Radio

USA

Set to appropriate setting for your country

Clock adjust

Clock Mode

See adjusting the clock on page ꢀ3 for more details

PM 6:00

1ꢀHr

ꢀ4Hr

18:00

Camera Image

Video Format

Normal Normal

Reverse

Normal Image

Mirror camera input image 180 degrees

System will auto detect NTSC or PAL

For NTSC compatibility

Auto

NTSC

PAL

For PAL compatibility

TFT panel will automatically open when IGN is turned on

TFT panel will not auto open when IGN is turned on

TFT will only open/close when OPEN button is pressed

Must enter password to turn anti-theft on or off

TFT Auto Open

Off

Manual

----

Anti-theft Code

Anti-theft active

0000

Off

System will require a password if main battery power is

removed for more than 5 minutes

Off

No password will be required if power is removed

Load Factory

defaults

Yes

Are you

sure?

Load all factory parameters to their original settlings,

Note: This will not reset the anti-theft password.

Yes/Cancel

Note: Not all GENERAL setup features are described in detail.

ꢀ1

XDVD710 OPERATION

GENERAL Setup - Adjusting Radio Frequency

Adjusting Radio Frequency

Step 1

1) Touch top left corner of screen

ꢀ

Step 2

ꢀ) Touch GENERAL setup button

Step 3

3) Touch USA

Step 4

Step 5

4) Touch the setting for your region

Touch RETURN to exit

ꢀꢀ

XDVD710 OPERATION

GENERAL Setup - Adjusting the Clock

12Hr Clock Mode

Step 1

1) Touch top left corner of screen

ꢀ

Step 2

ꢀ) Touch GENERAL setup button

Step 3

3) Touch 00:00 area in the CLOCK row

Steps 4-8

4) Keypad should now appear

5) Enter HOURS, touch ok

6) Enter MINUTES, touch ok

7) Touch AM or PM to set

8) Touch RETURN to exit

24Hr Clock Mode

If you desire ꢀ4Hr format, select ꢀ4Hr from CLOCK MODE, then follow steps 1-8.

ꢀ3

XDVD710 OPERATION

GENERAL Setup - Setting the Anti-theft code

By default Anti-theft password is 0000

and is turned Off. To turn this

feature on, follow the steps below.

CAUTION!!

This will lock your unit from operating

if battery POWER is disconnected for

more than 5 minutes.

ꢀ

Step 1 & 2

Step 3 & 4

Step 5 & 6

1) Touch top left corner of screen

ꢀ) Touch GENERAL Setup button

3) Touch down arrow button

4) Touch ----

5) Enter 0000, then press ok

6) Touch OFF

Note: it is

recommended that

you choose your own

4-digit password

Step 7 & 8

carefully, write it down

somewhere and keep

in a safe location. In

the event you ever

loose or forget your

password, call our tech

hot line for support

on how to unlock your

system.

7) Touch ON

8) Touch ---- again

9) Enter your new 4-digit password,

then press ok.

10) Touch RETURN to exit

Step 9 & 10

ꢀ4

XDVD710 OPERATION

SCREEN Setup - Menu

Screen Setup Menu

•

Press the SCREEN button to access the SCREEN setup mode

Select desired parameter you wish to change

Page will return back to previous screen after 10 seconds of inactivity or by

pressing the RETURN button

SCREEN Setup Menu matrix

Settings

Default

Options

Function

Press the  or  buttons on the remote or press the right

rotary once and rotate clockwise/counter-clockwise to adjust

the BRIGHTNESS to the desired setting

Brightness

0 - ꢀ0

Screen Tilt

1 - 6

Off

Select 1 to 6 to adjust the default tilt angle of the screen

Select On to activate the screen saver, Off to deactivate

Screen Saver

TS Calibrate

Version

Touch Yes to enter the Touch Screen calibration mode

Software version of unit

Yes

System Standby

To conserve the LCD backlight lifespan or to eliminate glare while night driving,

press STANDBY. The TFT screen will black out, however all other operations

continue to operate. Press any button except VOLUME or touch the screen again

to return to normal viewing.

ꢀ5

XDVD710 OPERATION

SCREEN Setup - Setting TFT Brightness

This will set the default setting

for the TFT display brightness.

This can also be set by

pressing the INFO button on

the front TFT panel.

Step 1

Step 2

Step 3

1) Touch top left corner of screen

ꢀ

ꢀ) Touch SCREEN setup button

3) Touch [-] to dim TFT

Step 4

Step 5

4) Touch [+] to brighten TFT

0 - ꢀ0 is possible

Default = 10

5) Touch RETURN to exit

ꢀ6

XDVD710 OPERATION

SCREEN Setup - Setting TFT Angle

Set for best viewing angle in

your vehicle

Step 1

1) Touch top left corner of screen

Step 2

ꢀ

ꢀ) Touch SCREEN setup button

Step 3

3) Touch a number displayed in SCREEN TILT row

Step 4

Step 5

4) Touch desired angle for best viewing angle

1 - 6 is possible

Default = 4

5) Touch RETURN to exit

ꢀ7

XDVD710 OPERATION

SCREEN Setup - Touch Screen Calibration

On occasion, the touch screen will

have to be calibrated. Follow these

steps as described.

Step 1

1) Touch top left corner of screen

ꢀ

Step 2

ꢀ) Touch SCREEN setup button

Step 3 & 4

3) Touch No in TS Calibration row

4) Then touch Yes

Note: For proper calibration

you must touch each pointer for

2 seconds. If pointers are not

touched properly, the calibration

sequence will start over until the

calibration is done correctly.

Step 5 & 6

5) Touch and hold the pointers as indicated on the screen for ꢀ seconds each

6) Screen will automatically return to MAIN MENU, touch RETURN to exit

ꢀ8

XDVD710 OPERATION

AM/FM Tuner Operation

AM/FM Tuner TFT Display

ꢀ

1ꢀ

14 13

Current MODE information, touch upper left area to return to MAIN MENU

Current PRESET station indicator

STEREO broadcast indicator

Clock

PRESET page up

LOCAL/DISTANCE selection

PRESET page down

Auto station SCAN button

MANUAL TUNE up

10)

11)

12)

13)

14)

15)

16)

17)

18)

19)

MANUAL TUNE down

SEEK TUNE up

SEEK TUNE down

AS/PS (AUTO STORE/PRESET SCAN)

BAND selection, FM1, FMꢀ, FM3, AM

VOLUME indicator

LOUD indicator

Equalizer indicator, touch to access AUDIO Setup menu

Current radio frequency indicator

Current radio BAND indicator

ꢀ9

XDVD710 OPERATION

AM/ FM Tuner Operation

Press the

button to auto SEEK up the next strongest station.

button to auto SEEK down the next strongest station.

button to manually tune up one step at a time.

button to manually tune down one step at a time.

Auto Seek Tuning

Manual Tuning

Auto Store (AS)

Press and hold AS/PS for more than ꢀ seconds to automatically store the

twelve strongest stations in the current band. Automatic Local tuning is

activated during the initial band scan, repeat for other bands.

Note: All presets within the current band will be overwritten.

Press AS/PS for less than ꢀ seconds to scan presets 1-1ꢀ on the current

Program Scan (PS)

SCAN

band, pausing for 10 seconds at each. Press AS/PS again to cancel.

Press SCAN to preview strong stations on the current band, pausing for 10

seconds at each station. Press SCAN again to cancel.

Touch LOC button on the TFT to activate LOC/DX tuning.

When the LOCAL function is on, LOC will appear. Only radio stations with a

strong signal are received. DISTANCE (DX) is for radio stations that are far

away and/or have weak signals.

LOC/DX Radio Station

Up to 36 FM stations and 1ꢀ AM stations can be stored. To store a station,

select the desired band and station. Press and hold the desired preset button

(1-1ꢀ) for more than ꢀ seconds. When stored, the PRESET number will

appear in the display. The station can be recalled anytime by pressing the

corresponding preset button on the TFT.

Storing Radio Stations

PRESET

Touch a corresponding radio frequency for less than ꢀ seconds to recall.

Recalling a Radio Station PRESET

Only 6 PRESETS can be display at one time, use PRESET page up/down to

access next stored PRESETS accordingly.

PRESET Page

Up/Down