TS10
INSTALLATION/OWNER'SꢀMANUAL
1"ꢀSoftꢀDomeꢀTweeter
TS10ꢀINSTALLATION
Connection
The illuminite lighting elements of your TS series products provide you with a unique
custom touch to your vehicle. Dual’s patent pending illuminite bulb system and control
circuitry provides an extraordinary lighted-Hue illumination which allows great creative
opportunities for the beginner and seasoned custom installer alike. The interior of your
vehicle will never sound or look ordinary again. Let your imagination take you there.
The lighting features of all illuminite products require a 12 volt DC power source to
operate. The speaker has two distinct sets of input terminals. The first is labeled audio
input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly
marked with a label positioned directly above the terminal housing. The polarity (+ and -)
indicators for each set of inputs also appear on these labels.
1. Do not connect Amplifier or any audio source to illuminite lighting inputs. Inputs
are designed for switched 12 volt DC power source only.
2. See fig. 1a, (illustrates wiring diagram) be sure to maintain polarity. Be sure to
connect to a constant switched 12 volt DC source. Correct connection would be
the positive (+) 12 volt wire to the Positive (+) illuminite Lighting input terminal
and connect the Negative (-) illuminite lighting input terminal to a good chassis
ground.
Notice:ꢀThe Illuminite™ series LED illumination elements are not removable. There
are no serviceable parts inside or attached to the speaker assembly. The Illuminite™
series products are sensitive electronic devices. Removal or tampering with any part or
portion of the speaker and/or its assemblies will damage the product and void the limited
warranty.
Wiring
Connect the tweeter as shown in the wiring diagram. Improper
connections will cause damage not covered by the product warranty.
Mounting
Red
Black
Tweeters have been designed for flush,
surface or 30 degree mounting. Flush
mounting, which provides a custom
appearance, requires 1" of clearance behind
mounting surface. If sufficient clearance is not
available, the included mounting kit allows
tweeter to be mounted to the surface of the
vehincle's interior. Tweeters can be mounted
straight or at an angle depending on the
adapter selected.
-
Amplifier
3
Specifications
Peak Power Handling.................................................................................................. 100 Watts
RMS Power Handling......................................................................................................25 Watts
Frequency Response............................................................................................. 3kHz - 20kHz
Sensitivity (1 Watt @ 1 Meter)............................................................................................ 90dB
Impedance......................................................................................................................... 4 ohms
Includes 12dB Inline Crossover
LimitedꢀOne-YearꢀWarranty
This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
What to do?
1. Before you call for service, check the
troubleshooting guide in your owner’s manual.
A slight adjustment of any custom controls or
connections discussed in your instruction booklet may
save you a service call.
Dual Electronics Corp. warrants this product to the
original purchaser to be free from defects in material
and workmanship for a period of one year from the
date of the original purchase.
2. If you require service during the warranty period,
you must carefully pack the product (preferably in the
original package) and ship it by prepaid transportation
with a copy of the original receipt from the retailer to
an authorized service center.
Dual Electronics Corp. agrees, at our option, during
the warranty period, to repair any defect in material
or workmanship or to furnish an equal new, renewed
or comparable product (whichever is deemed
necessary) in exchange without charges, subject to
verification of the defect or malfunction and proof
of the date of purchase. Subsequent replacement
products are warranted for the balance of the original
warranty period.
3. Please describe your problem in writing and
include your name, a return UPS shipping address
(P.O. Box not acceptable), and a daytime phone
number with your shipment.
Who is covered? This warranty is extended to the
original retail purchaser for products purchased and
used in the U.S.A.
4. For more information and for the location of the
nearest authorized service center please contact us
by one of the following methods:
What is covered? This warranty covers all defects
in material and workmanship in this product. The
following are not covered: installation/removal costs,
damage resulting from accident, misuse, abuse,
neglect, product modification, improper installation,
incorrect line voltage, unauthorized repair or failure
to follow instructions supplied with the product, or
damage occurring during return shipment of the
product.
Call us toll-free at 1-866-382-5476
E-mail us at [email protected]
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation
the implied warranties of merchantability and fitness
for a particular purpose and any obligation, liability,
right, claim or remedy in contract or tort, whether or
not arising from the company’s negligence, actual or
imputed. No person or representative is authorized
to assume for the company any other liability in
connection with the sale of this product. In no event
shall the company be liable for indirect, incidental or
consequential damages.
Dual Electronics Corporation
Toll Free: 1-866-382-5476
©2008 Dual Electronics Corp. All rights reserved.
NSA0608-V01
|